remove blank lines at end of file

Remove trailing blank lines. They serve no purpose and are just editor leftovers. These can cause git to complain about whitespace errors during merges. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2019-11-11 11:50:15 -08:00 · 2019-11-11 11:50:15 -08:00 · 06710448c9
commit 06710448c9
parent 6b124806a3
20 changed files with 0 additions and 20 deletions
--- a/1
+++ b/1
@ -2,4 +2,3 @@
 # Copyright(c) 2010-2014 Intel Corporation

 .error Error please compile using GNU Make (gmake)
-
--- a/app/test/meson.build
+++ b/app/test/meson.build
@ -459,4 +459,3 @@ foreach arg : dump_test_names
 		is_parallel : false,
 		suite : 'debug-tests')
 endforeach
-
--- a/app/test/test_rib6.c
+++ b/app/test/test_rib6.c
@ -370,4 +370,3 @@ test_slow_rib6(void)

 REGISTER_TEST_COMMAND(rib6_autotest, test_rib6);
 REGISTER_TEST_COMMAND(rib6_slow_autotest, test_slow_rib6);
-
--- a/config/defconfig_arm64-emag-linuxapp-gcc
+++ b/config/defconfig_arm64-emag-linuxapp-gcc
@ -9,4 +9,3 @@ CONFIG_RTE_MACHINE="emag"
 CONFIG_RTE_CACHE_LINE_SIZE=64
 CONFIG_RTE_MAX_NUMA_NODES=1
 CONFIG_RTE_MAX_LCORE=32
-
--- a/doc/guides/cryptodevs/mvsam.rst
+++ b/doc/guides/cryptodevs/mvsam.rst
@ -110,4 +110,3 @@ operation:
     --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f  \
     --auth_op GENERATE --auth_algo sha1-hmac \
     --auth_key 10:11:12:13:14:15:16:17:18:19:1a:1b:1c:1d:1e:1f
-
--- a/doc/guides/nics/kni.rst
+++ b/doc/guides/nics/kni.rst
@ -168,4 +168,3 @@ It is possible to test PMD quickly using KNI kernel module loopback feature:
        RX-packets: 71275820       RX-dropped: 0             RX-total: 71275820
        TX-packets: 71275884       TX-dropped: 0             TX-total: 71275884
        ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
--- a/doc/guides/nics/tap.rst
+++ b/doc/guides/nics/tap.rst
@ -298,4 +298,3 @@ Systems supporting flow API
 | Azure Ubuntu 16.04,| No limitation         |
 | kernel 4.13        |                       |
 +--------------------+-----------------------+
-
--- a/doc/guides/prog_guide/generic_segmentation_offload_lib.rst
+++ b/doc/guides/prog_guide/generic_segmentation_offload_lib.rst
@ -237,4 +237,3 @@ To segment an outgoing packet, an application must:
   For tunneled packets, the outer IPv4 headers' checksums should also be
   updated. Alternatively, the application may offload checksum calculation
   to HW.
-
--- a/doc/guides/prog_guide/kernel_nic_interface.rst
+++ b/doc/guides/prog_guide/kernel_nic_interface.rst
@ -321,4 +321,3 @@ Ethtool is a Linux-specific tool with corresponding support in the kernel.
 The current version of kni provides minimal ethtool functionality
 including querying version and link state. It does not support link
 control, statistics, or dumping device registers.
-
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@ -550,4 +550,3 @@ Tested OSes
 - Ubuntu 15.10
 - Ubuntu 16.04 LTS
 - Wind River Linux 8
-
--- a/doc/guides/sample_app_ug/flow_filtering.rst
+++ b/doc/guides/sample_app_ug/flow_filtering.rst
@ -513,4 +513,3 @@ The last part of the function is to validate the rule and create it.
   int res = rte_flow_validate(port_id, &attr, pattern, action, &error);
   if (!res)
        flow = rte_flow_create(port_id, &attr, pattern, action, &error);
-
--- a/doc/guides/sample_app_ug/vm_power_management.rst
+++ b/doc/guides/sample_app_ug/vm_power_management.rst
@ -761,4 +761,3 @@ will send the policy to the host:

 Once the policy is sent to the host, the host application takes over the power monitoring
 of the specified cores in the policy.
-
--- a/drivers/net/iavf/iavf_rxtx.c
+++ b/drivers/net/iavf/iavf_rxtx.c
@ -1924,4 +1924,3 @@ iavf_dev_tx_desc_status(void *tx_queue, uint16_t offset)

 	return RTE_ETH_TX_DESC_FULL;
 }
-
--- a/drivers/raw/ifpga/base/opae_at24_eeprom.c
+++ b/drivers/raw/ifpga/base/opae_at24_eeprom.c
@ -85,4 +85,3 @@ int at24_eeprom_write(struct altera_i2c_dev *dev, unsigned int slave_addr,

 	return write_count;
 }
-
--- a/examples/vhost_blk/vhost_blk.c
+++ b/examples/vhost_blk/vhost_blk.c
@ -1092,4 +1092,3 @@ int main(int argc, char *argv[])

 	return 0;
 }
-
--- a/lib/librte_fib/dir24_8.h
+++ b/lib/librte_fib/dir24_8.h
@ -33,4 +33,3 @@ dir24_8_modify(struct rte_fib *fib, uint32_t ip, uint8_t depth,
 #endif

 #endif /* _DIR24_8_H_ */
-
--- a/lib/librte_fib/rte_fib6.c
+++ b/lib/librte_fib/rte_fib6.c
@ -319,4 +319,3 @@ rte_fib6_get_rib(struct rte_fib6 *fib)
 {
 	return (fib == NULL) ? NULL : fib->rib;
 }
-
--- a/lib/librte_fib/trie.c
+++ b/lib/librte_fib/trie.c
@ -757,4 +757,3 @@ trie_free(void *p)
 	rte_free(dp->tbl8);
 	rte_free(dp);
 }
-
--- a/lib/librte_fib/trie.h
+++ b/lib/librte_fib/trie.h
@ -34,4 +34,3 @@ trie_modify(struct rte_fib6 *fib, const uint8_t ip[RTE_FIB6_IPV6_ADDR_SIZE],
 #endif

 #endif /* _TRIE_H_ */
-
--- a/license/exceptions.txt
+++ b/license/exceptions.txt
@ -15,4 +15,3 @@ SPDX Identifier     TB Approval Date  GB Approval Date  File name
 1.

 -----------------------------------------------------------------
-