examples/link_status_interrupt: update

Signed-off-by: Intel
This commit is contained in:
Intel 2012-12-20 00:00:00 +01:00 committed by Thomas Monjalon
parent f68aad7904
commit 0c3d715cb3

View File

@ -133,8 +133,8 @@ struct mbuf_table {
#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 16
struct lcore_queue_conf {
unsigned n_rx_queue;
unsigned rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
unsigned n_rx_port;
unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
unsigned tx_queue_id;
struct mbuf_table tx_mbufs[LSI_MAX_PORTS];
@ -304,9 +304,9 @@ lsi_simple_forward(struct rte_mbuf *m, unsigned portid)
eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
/* 00:09:c0:00:00:xx */
/* 02:00:00:00:00:xx */
tmp = &eth->d_addr.addr_bytes[0];
*((uint64_t *)tmp) = 0x000000c00900 + (dst_port << 24);
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
/* src addr */
ether_addr_copy(&lsi_ports_eth_addr[dst_port], &eth->s_addr);
@ -331,16 +331,16 @@ lsi_main_loop(void)
lcore_id = rte_lcore_id();
qconf = &lcore_queue_conf[lcore_id];
if (qconf->n_rx_queue == 0) {
if (qconf->n_rx_port == 0) {
RTE_LOG(INFO, LSI, "lcore %u has nothing to do\n", lcore_id);
while(1);
}
RTE_LOG(INFO, LSI, "entering main loop on lcore %u\n", lcore_id);
for (i = 0; i < qconf->n_rx_queue; i++) {
for (i = 0; i < qconf->n_rx_port; i++) {
portid = qconf->rx_queue_list[i];
portid = qconf->rx_port_list[i];
RTE_LOG(INFO, LSI, " -- lcoreid=%u portid=%u\n", lcore_id,
portid);
}
@ -390,9 +390,9 @@ lsi_main_loop(void)
/*
* Read packet from RX queues
*/
for (i = 0; i < qconf->n_rx_queue; i++) {
for (i = 0; i < qconf->n_rx_port; i++) {
portid = qconf->rx_queue_list[i];
portid = qconf->rx_port_list[i];
nb_rx = rte_eth_rx_burst((uint8_t) portid, 0,
pkts_burst, MAX_PKT_BURST);
@ -639,10 +639,9 @@ MAIN(int argc, char **argv)
struct lcore_queue_conf *qconf;
struct rte_eth_dev_info dev_info;
int ret;
unsigned int nb_ports, nb_lcores;
unsigned portid, portid_last = 0, queueid = 0;
unsigned int nb_ports;
unsigned portid, portid_last = 0;
unsigned lcore_id, rx_lcore_id;
unsigned n_tx_queue, max_tx_queues;
unsigned nb_ports_in_mask = 0;
/* init EAL */
@ -682,13 +681,9 @@ MAIN(int argc, char **argv)
if (nb_ports > LSI_MAX_PORTS)
nb_ports = LSI_MAX_PORTS;
nb_lcores = rte_lcore_count();
/*
* Each logical core is assigned a dedicated TX queue on each port.
* Compute the maximum number of TX queues that can be used.
*/
max_tx_queues = nb_lcores;
for (portid = 0; portid < nb_ports; portid++) {
/* skip ports that are not enabled */
if ((lsi_enabled_port_mask & (1 << portid)) == 0)
@ -705,10 +700,7 @@ MAIN(int argc, char **argv)
nb_ports_in_mask++;
rte_eth_dev_info_get((uint8_t) portid, &dev_info);
if (max_tx_queues > dev_info.max_tx_queues)
max_tx_queues = dev_info.max_tx_queues;
}
if (nb_ports_in_mask < 2 || nb_ports_in_mask % 2)
rte_exit(EXIT_FAILURE, "Current enabled port number is %u, "
"but it should be even and at least 2\n",
@ -716,8 +708,6 @@ MAIN(int argc, char **argv)
rx_lcore_id = 0;
qconf = &lcore_queue_conf[rx_lcore_id];
qconf->tx_queue_id = 0;
n_tx_queue = 1;
/* Initialize the port/queue configuration of each logical core */
for (portid = 0; portid < nb_ports; portid++) {
@ -727,30 +717,24 @@ MAIN(int argc, char **argv)
/* get the lcore_id for this port */
while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
lcore_queue_conf[rx_lcore_id].n_rx_queue ==
lcore_queue_conf[rx_lcore_id].n_rx_port ==
lsi_rx_queue_per_lcore) {
rx_lcore_id++;
if (rx_lcore_id >= RTE_MAX_LCORE)
rte_exit(EXIT_FAILURE, "Not enough cores\n");
if (n_tx_queue == max_tx_queues)
rte_exit(EXIT_FAILURE, "Not enough TX queues\n");
}
if (qconf != &lcore_queue_conf[rx_lcore_id]) {
if (qconf != &lcore_queue_conf[rx_lcore_id])
/* Assigned a new logical core in the loop above. */
qconf = &lcore_queue_conf[rx_lcore_id];
qconf->tx_queue_id = n_tx_queue;
n_tx_queue++;
}
qconf->rx_queue_list[qconf->n_rx_queue] = portid;
qconf->n_rx_queue++;
printf("Lcore %u: RX port %u TX queue %u\n",
rx_lcore_id, portid, qconf->tx_queue_id);
qconf->rx_port_list[qconf->n_rx_port] = portid;
qconf->n_rx_port++;
printf("Lcore %u: RX port %u\n",rx_lcore_id, portid);
}
/* Initialise each port */
for (portid = 0; portid < nb_ports; portid++) {
/* skip ports that are not enabled */
if ((lsi_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
@ -759,8 +743,7 @@ MAIN(int argc, char **argv)
/* init port */
printf("Initializing port %u... ", portid);
fflush(stdout);
ret = rte_eth_dev_configure((uint8_t) portid, 1,
(uint16_t) n_tx_queue, &port_conf);
ret = rte_eth_dev_configure((uint8_t) portid, 1, 1, &port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
ret, portid);
@ -786,16 +769,12 @@ MAIN(int argc, char **argv)
ret, portid);
/* init one TX queue logical core on each port */
for (queueid = 0; queueid < n_tx_queue; queueid++) {
fflush(stdout);
ret = rte_eth_tx_queue_setup((uint8_t) portid,
(uint16_t) queueid, nb_txd,
SOCKET0, &tx_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%u queue=%u\n",
ret, portid, queueid);
}
fflush(stdout);
ret = rte_eth_tx_queue_setup((uint8_t) portid, 0, nb_txd,
SOCKET0, &tx_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d,port=%u\n",
ret, portid);
/* Start device */
ret = rte_eth_dev_start((uint8_t) portid);