net/ark: stub PMD for Atomic Rules Arkville

Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
This commit is contained in:
Ed Czeck 2017-04-04 15:50:23 -04:00 committed by Ferruh Yigit
parent 1cbeaa0ead
commit 1131cbf0fb
13 changed files with 957 additions and 0 deletions

View File

@ -286,6 +286,14 @@ M: Evgeny Schemeilin <evgenys@amazon.com>
F: drivers/net/ena/
F: doc/guides/nics/ena.rst
Atomic Rules ARK
M: Shepard Siegel <shepard.siegel@atomicrules.com>
M: Ed Czeck <ed.czeck@atomicrules.com>
M: John Miller <john.miller@atomicrules.com>
F: drivers/net/ark/
F: doc/guides/nics/ark.rst
F: doc/guides/nics/features/ark.ini
Broadcom bnxt
M: Stephen Hurd <stephen.hurd@broadcom.com>
M: Ajit Khaparde <ajit.khaparde@broadcom.com>

View File

@ -361,6 +361,16 @@ CONFIG_RTE_LIBRTE_QEDE_FW=""
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#

View File

@ -61,6 +61,7 @@ CONFIG_RTE_SCHED_VECTOR=n
# cannot use those on ARM
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_LIBRTE_ARK_PMD=n
CONFIG_RTE_LIBRTE_EM_PMD=n
CONFIG_RTE_LIBRTE_IGB_PMD=n
CONFIG_RTE_LIBRTE_CXGBE_PMD=n

296
doc/guides/nics/ark.rst Normal file
View File

@ -0,0 +1,296 @@
.. BSD LICENSE
Copyright (c) 2015-2017 Atomic Rules LLC
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of Atomic Rules LLC nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ARK Poll Mode Driver
====================
The ARK PMD is a DPDK poll-mode driver for the Atomic Rules Arkville
(ARK) family of devices.
More information can be found at the `Atomic Rules website
<http://atomicrules.com>`_.
Overview
--------
The Atomic Rules Arkville product is DPDK and AXI compliant product
that marshals packets across a PCIe conduit between host DPDK mbufs and
FPGA AXI streams.
The ARK PMD, and the spirit of the overall Arkville product,
has been to take the DPDK API/ABI as a fixed specification;
then implement much of the business logic in FPGA RTL circuits.
The approach of *working backwards* from the DPDK API/ABI and having
the GPP host software *dictate*, while the FPGA hardware *copes*,
results in significant performance gains over a naive implementation.
While this document describes the ARK PMD software, it is helpful to
understand what the FPGA hardware is and is not. The Arkville RTL
component provides a single PCIe Physical Function (PF) supporting
some number of RX/Ingress and TX/Egress Queues. The ARK PMD controls
the Arkville core through a dedicated opaque Core BAR (CBAR).
To allow users full freedom for their own FPGA application IP,
an independent FPGA Application BAR (ABAR) is provided.
One popular way to imagine Arkville's FPGA hardware aspect is as the
FPGA PCIe-facing side of a so-called Smart NIC. The Arkville core does
not contain any MACs, and is link-speed independent, as well as
agnostic to the number of physical ports the application chooses to
use. The ARK driver exposes the familiar PMD interface to allow packet
movement to and from mbufs across multiple queues.
However FPGA RTL applications could contain a universe of added
functionality that an Arkville RTL core does not provide or can
not anticipate. To allow for this expectation of user-defined
innovation, the ARK PMD provides a dynamic mechanism of adding
capabilities without having to modify the ARK PMD.
The ARK PMD is intended to support all instances of the Arkville
RTL Core, regardless of configuration, FPGA vendor, or target
board. While specific capabilities such as number of physical
hardware queue-pairs are negotiated; the driver is designed to
remain constant over a broad and extendable feature set.
Intentionally, Arkville by itself DOES NOT provide common NIC
capabilities such as offload or receive-side scaling (RSS).
These capabilities would be viewed as a gate-level "tax" on
Green-box FPGA applications that do not require such function.
Instead, they can be added as needed with essentially no
overhead to the FPGA Application.
The ARK PMD also supports optional user extensions, through dynamic linking.
The ARK PMD user extensions are a feature of Arkvilles DPDK
net/ark poll mode driver, allowing users to add their
own code to extend the net/ark functionality without
having to make source code changes to the driver. One motivation for
this capability is that while DPDK provides a rich set of functions
to interact with NIC-like capabilities (e.g. MAC addresses and statistics),
the Arkville RTL IP does not include a MAC. Users can supply their
own MAC or custom FPGA applications, which may require control from
the PMD. The user extension is the means providing the control
between the user's FPGA application and the existing DPDK features via
the PMD.
Device Parameters
-------------------
The ARK PMD supports device parameters that are used for packet
routing and for internal packet generation and packet checking. This
section describes the supported parameters. These features are
primarily used for diagnostics, testing, and performance verification
under the guidance of an Arkville specialist. The nominal use of
Arkville does not require any configuration using these parameters.
"Pkt_dir"
The Packet Director controls connectivity between Arkville's internal
hardware components. The features of the Pkt_dir are only used for
diagnostics and testing; it is not intended for nominal use. The full
set of features are not published at this level.
Format:
Pkt_dir=0x00110F10
"Pkt_gen"
The packet generator parameter takes a file as its argument. The file
contains configuration parameters used internally for regression
testing and are not intended to be published at this level. The
packet generator is an internal Arkville hardware component.
Format:
Pkt_gen=./config/pg.conf
"Pkt_chkr"
The packet checker parameter takes a file as its argument. The file
contains configuration parameters used internally for regression
testing and are not intended to be published at this level. The
packet checker is an internal Arkville hardware component.
Format:
Pkt_chkr=./config/pc.conf
Data Path Interface
-------------------
Ingress RX and Egress TX operation is by the nominal DPDK API .
The driver supports single-port, multi-queue for both RX and TX.
Refer to ``ark_ethdev.h`` for the list of supported methods to
act upon RX and TX Queues.
Configuration Information
-------------------------
**DPDK Configuration Parameters**
The following configuration options are available for the ARK PMD:
* **CONFIG_RTE_LIBRTE_ARK_PMD** (default y): Enables or disables inclusion
of the ARK PMD driver in the DPDK compilation.
* **CONFIG_RTE_LIBRTE_ARK_PAD_TX** (default y): When enabled TX
packets are padded to 60 bytes to support downstream MACS.
* **CONFIG_RTE_LIBRTE_ARK_DEBUG_RX** (default n): Enables or disables debug
logging and internal checking of RX ingress logic within the ARK PMD driver.
* **CONFIG_RTE_LIBRTE_ARK_DEBUG_TX** (default n): Enables or disables debug
logging and internal checking of TX egress logic within the ARK PMD driver.
* **CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS** (default n): Enables or disables debug
logging of detailed packet and performance statistics gathered in
the PMD and FPGA.
* **CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE** (default n): Enables or disables debug
logging of detailed PMD events and status.
Building DPDK
-------------
See the :ref:`DPDK Getting Started Guide for Linux <linux_gsg>` for
instructions on how to build DPDK.
By default the ARK PMD library will be built into the DPDK library.
For configuring and using UIO and VFIO frameworks, please also refer :ref:`the
documentation that comes with DPDK suite <linux_gsg>`.
Supported ARK RTL PCIe Instances
--------------------------------
ARK PMD supports the following Arkville RTL PCIe instances including:
* ``1d6c:100d`` - AR-ARKA-FX0 [Arkville 32B DPDK Data Mover]
* ``1d6c:100e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover]
Supported Operating Systems
---------------------------
Any Linux distribution fulfilling the conditions described in ``System Requirements``
section of :ref:`the DPDK documentation <linux_gsg>` or refer to *DPDK
Release Notes*. ARM and PowerPC architectures are not supported at this time.
Supported Features
------------------
* Dynamic ARK PMD extensions
* Multiple receive and transmit queues
* Jumbo frames up to 9K
* Hardware Statistics
Unsupported Features
--------------------
Features that may be part of, or become part of, the Arkville RTL IP that are
not currently supported or exposed by the ARK PMD include:
* PCIe SR-IOV Virtual Functions (VFs)
* Arkville's Packet Generator Control and Status
* Arkville's Packet Director Control and Status
* Arkville's Packet Checker Control and Status
* Arkville's Timebase Management
Pre-Requisites
--------------
#. Prepare the system as recommended by DPDK suite. This includes environment
variables, hugepages configuration, tool-chains and configuration
#. Insert igb_uio kernel module using the command 'modprobe igb_uio'
#. Bind the intended ARK device to igb_uio module
At this point the system should be ready to run DPDK applications. Once the
application runs to completion, the ARK PMD can be detached from igb_uio if necessary.
Usage Example
-------------
This section demonstrates how to launch **testpmd** with Atomic Rules ARK
devices managed by librte_pmd_ark.
#. Load the kernel modules:
.. code-block:: console
modprobe uio
insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
.. note::
The ARK PMD driver depends upon the igb_uio user space I/O kernel module
#. Mount and request huge pages:
.. code-block:: console
mount -t hugetlbfs nodev /mnt/huge
echo 256 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
#. Bind UIO driver to ARK device at 0000:01:00.0 (using dpdk-devbind.py):
.. code-block:: console
./usertools/dpdk-devbind.py --bind=igb_uio 0000:01:00.0
.. note::
The last argument to dpdk-devbind.py is the 4-tuple that indentifies a specific PCIe
device. You can use lspci -d 1d6c: to indentify all Atomic Rules devices in the system,
and thus determine the correct 4-tuple argument to dpdk-devbind.py
#. Start testpmd with basic parameters:
.. code-block:: console
./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -- -i
Example output:
.. code-block:: console
[...]
EAL: PCI device 0000:01:00.0 on NUMA socket -1
EAL: probe driver: 1d6c:100e rte_ark_pmd
EAL: PCI memory mapped at 0x7f9b6c400000
PMD: eth_ark_dev_init(): Initializing 0:2:0.1
ARKP PMD CommitID: 378f3a67
Configuring Port 0 (socket 0)
Port 0: DC:3C:F6:00:00:01
Checking link statuses...
Port 0 Link Up - speed 100000 Mbps - full-duplex
Done
testpmd>

View File

@ -36,6 +36,7 @@ Network Interface Controller Drivers
:numbered:
overview
ark
avp
bnx2x
bnxt

View File

@ -41,6 +41,8 @@ core-libs += librte_net librte_kvargs
DIRS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += af_packet
DEPDIRS-af_packet = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += ark
DEPDIRS-ark = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_AVP_PMD) += avp
DEPDIRS-avp = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x

55
drivers/net/ark/Makefile Normal file
View File

@ -0,0 +1,55 @@
# BSD LICENSE
#
# Copyright (c) 2015-2017 Atomic Rules LLC
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of copyright holder nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
include $(RTE_SDK)/mk/rte.vars.mk
#
# library name
#
LIB = librte_pmd_ark.a
CFLAGS += -O3 -I./
CFLAGS += $(WERROR_FLAGS) -Werror
EXPORT_MAP := rte_pmd_ark_version.map
LIBABIVER := 1
#
# all source are stored in SRCS-y
#
SRCS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += ark_ethdev.c
# this lib depends upon:
LDLIBS += -lpthread
LDLIBS += -ldl
include $(RTE_SDK)/mk/rte.lib.mk

View File

@ -0,0 +1,309 @@
/*-
* BSD LICENSE
*
* Copyright (c) 2015-2017 Atomic Rules LLC
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <unistd.h>
#include <sys/stat.h>
#include <dlfcn.h>
#include <rte_ethdev_pci.h>
#include <rte_kvargs.h>
#include "ark_global.h"
#include "ark_logs.h"
#include "ark_ethdev.h"
/* Internal prototypes */
static int eth_ark_check_args(struct ark_adapter *ark, const char *params);
static int eth_ark_dev_init(struct rte_eth_dev *dev);
static int eth_ark_dev_uninit(struct rte_eth_dev *eth_dev);
static int eth_ark_dev_configure(struct rte_eth_dev *dev);
static void eth_ark_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info);
/*
* The packet generator is a functional block used to generate packet
* patterns for testing. It is not intended for nominal use.
*/
#define ARK_PKTGEN_ARG "Pkt_gen"
/*
* The packet checker is a functional block used to verify packet
* patterns for testing. It is not intended for nominal use.
*/
#define ARK_PKTCHKR_ARG "Pkt_chkr"
/*
* The packet director is used to select the internal ingress and
* egress packets paths during testing. It is not intended for
* nominal use.
*/
#define ARK_PKTDIR_ARG "Pkt_dir"
/* Devinfo configurations */
#define ARK_RX_MAX_QUEUE (4096 * 4)
#define ARK_RX_MIN_QUEUE (512)
#define ARK_RX_MAX_PKT_LEN ((16 * 1024) - 128)
#define ARK_RX_MIN_BUFSIZE (1024)
#define ARK_TX_MAX_QUEUE (4096 * 4)
#define ARK_TX_MIN_QUEUE (256)
static const char * const valid_arguments[] = {
ARK_PKTGEN_ARG,
ARK_PKTCHKR_ARG,
ARK_PKTDIR_ARG,
NULL
};
static const struct rte_pci_id pci_id_ark_map[] = {
{RTE_PCI_DEVICE(0x1d6c, 0x100d)},
{RTE_PCI_DEVICE(0x1d6c, 0x100e)},
{.vendor_id = 0, /* sentinel */ },
};
static int
eth_ark_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
struct rte_eth_dev *eth_dev;
int ret;
eth_dev = rte_eth_dev_pci_allocate(pci_dev, sizeof(struct ark_adapter));
if (eth_dev == NULL)
return -ENOMEM;
ret = eth_ark_dev_init(eth_dev);
if (ret)
rte_eth_dev_pci_release(eth_dev);
return ret;
}
static int
eth_ark_pci_remove(struct rte_pci_device *pci_dev)
{
return rte_eth_dev_pci_generic_remove(pci_dev, eth_ark_dev_uninit);
}
static struct rte_pci_driver rte_ark_pmd = {
.id_table = pci_id_ark_map,
.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
.probe = eth_ark_pci_probe,
.remove = eth_ark_pci_remove,
};
static const struct eth_dev_ops ark_eth_dev_ops = {
.dev_configure = eth_ark_dev_configure,
.dev_infos_get = eth_ark_dev_info_get,
};
static int
eth_ark_dev_init(struct rte_eth_dev *dev)
{
struct ark_adapter *ark =
(struct ark_adapter *)dev->data->dev_private;
struct rte_pci_device *pci_dev;
int ret = -1;
ark->eth_dev = dev;
PMD_FUNC_LOG(DEBUG, "\n");
pci_dev = ARK_DEV_TO_PCI(dev);
rte_eth_copy_pci_info(dev, pci_dev);
ark->bar0 = (uint8_t *)pci_dev->mem_resource[0].addr;
ark->a_bar = (uint8_t *)pci_dev->mem_resource[2].addr;
dev->dev_ops = &ark_eth_dev_ops;
dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
if (pci_dev->device.devargs)
ret = eth_ark_check_args(ark, pci_dev->device.devargs->args);
else
PMD_DRV_LOG(INFO, "No Device args found\n");
return ret;
}
static int
eth_ark_dev_uninit(struct rte_eth_dev *dev)
{
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
dev->dev_ops = NULL;
dev->rx_pkt_burst = NULL;
dev->tx_pkt_burst = NULL;
return 0;
}
static int
eth_ark_dev_configure(struct rte_eth_dev *dev __rte_unused)
{
PMD_FUNC_LOG(DEBUG, "\n");
return 0;
}
static void
eth_ark_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info)
{
dev_info->max_rx_pktlen = ARK_RX_MAX_PKT_LEN;
dev_info->min_rx_bufsize = ARK_RX_MIN_BUFSIZE;
dev_info->rx_desc_lim = (struct rte_eth_desc_lim) {
.nb_max = ARK_RX_MAX_QUEUE,
.nb_min = ARK_RX_MIN_QUEUE,
.nb_align = ARK_RX_MIN_QUEUE}; /* power of 2 */
dev_info->tx_desc_lim = (struct rte_eth_desc_lim) {
.nb_max = ARK_TX_MAX_QUEUE,
.nb_min = ARK_TX_MIN_QUEUE,
.nb_align = ARK_TX_MIN_QUEUE}; /* power of 2 */
/* ARK PMD supports all line rates, how do we indicate that here ?? */
dev_info->speed_capa = (ETH_LINK_SPEED_1G |
ETH_LINK_SPEED_10G |
ETH_LINK_SPEED_25G |
ETH_LINK_SPEED_40G |
ETH_LINK_SPEED_50G |
ETH_LINK_SPEED_100G);
dev_info->pci_dev = ARK_DEV_TO_PCI(dev);
}
static inline int
process_pktdir_arg(const char *key, const char *value,
void *extra_args)
{
PMD_FUNC_LOG(DEBUG, "key = %s, value = %s\n",
key, value);
struct ark_adapter *ark =
(struct ark_adapter *)extra_args;
ark->pkt_dir_v = strtol(value, NULL, 16);
PMD_FUNC_LOG(DEBUG, "pkt_dir_v = 0x%x\n", ark->pkt_dir_v);
return 0;
}
static inline int
process_file_args(const char *key, const char *value, void *extra_args)
{
PMD_FUNC_LOG(DEBUG, "key = %s, value = %s\n",
key, value);
char *args = (char *)extra_args;
/* Open the configuration file */
FILE *file = fopen(value, "r");
char line[ARK_MAX_ARG_LEN];
int size = 0;
int first = 1;
while (fgets(line, sizeof(line), file)) {
size += strlen(line);
if (size >= ARK_MAX_ARG_LEN) {
PMD_DRV_LOG(ERR, "Unable to parse file %s args, "
"parameter list is too long\n", value);
fclose(file);
return -1;
}
if (first) {
strncpy(args, line, ARK_MAX_ARG_LEN);
first = 0;
} else {
strncat(args, line, ARK_MAX_ARG_LEN);
}
}
PMD_FUNC_LOG(DEBUG, "file = %s\n", args);
fclose(file);
return 0;
}
static int
eth_ark_check_args(struct ark_adapter *ark, const char *params)
{
struct rte_kvargs *kvlist;
unsigned int k_idx;
struct rte_kvargs_pair *pair = NULL;
kvlist = rte_kvargs_parse(params, valid_arguments);
if (kvlist == NULL)
return 0;
ark->pkt_gen_args[0] = 0;
ark->pkt_chkr_args[0] = 0;
for (k_idx = 0; k_idx < kvlist->count; k_idx++) {
pair = &kvlist->pairs[k_idx];
PMD_FUNC_LOG(DEBUG, "**** Arg passed to PMD = %s:%s\n",
pair->key,
pair->value);
}
if (rte_kvargs_process(kvlist,
ARK_PKTDIR_ARG,
&process_pktdir_arg,
ark) != 0) {
PMD_DRV_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTDIR_ARG);
return -1;
}
if (rte_kvargs_process(kvlist,
ARK_PKTGEN_ARG,
&process_file_args,
ark->pkt_gen_args) != 0) {
PMD_DRV_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTGEN_ARG);
return -1;
}
if (rte_kvargs_process(kvlist,
ARK_PKTCHKR_ARG,
&process_file_args,
ark->pkt_chkr_args) != 0) {
PMD_DRV_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTCHKR_ARG);
return -1;
}
PMD_DRV_LOG(INFO, "packet director set to 0x%x\n", ark->pkt_dir_v);
return 0;
}
RTE_PMD_REGISTER_PCI(net_ark, rte_ark_pmd);
RTE_PMD_REGISTER_KMOD_DEP(net_ark, "* igb_uio | uio_pci_generic ");
RTE_PMD_REGISTER_PCI_TABLE(net_ark, pci_id_ark_map);
RTE_PMD_REGISTER_PARAM_STRING(net_ark,
ARK_PKTGEN_ARG "=<filename> "
ARK_PKTCHKR_ARG "=<filename> "
ARK_PKTDIR_ARG "=<bitmap>");

View File

@ -0,0 +1,41 @@
/*-
* BSD LICENSE
*
* Copyright (c) 2015-2017 Atomic Rules LLC
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ARK_ETHDEV_H_
#define _ARK_ETHDEV_H_
#define ARK_DEV_TO_PCI(eth_dev) \
RTE_DEV_TO_PCI((eth_dev)->device)
#endif

View File

@ -0,0 +1,110 @@
/*-
* BSD LICENSE
*
* Copyright (c) 2015-2017 Atomic Rules LLC
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ARK_GLOBAL_H_
#define _ARK_GLOBAL_H_
#include <time.h>
#include <assert.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_memcpy.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>
#include <rte_kvargs.h>
#include <rte_dev.h>
#include <rte_version.h>
#define ETH_ARK_ARG_MAXLEN 64
#define ARK_SYSCTRL_BASE 0x0
#define ARK_PKTGEN_BASE 0x10000
#define ARK_MPU_RX_BASE 0x20000
#define ARK_UDM_BASE 0x30000
#define ARK_MPU_TX_BASE 0x40000
#define ARK_DDM_BASE 0x60000
#define ARK_CMAC_BASE 0x80000
#define ARK_PKTDIR_BASE 0xa0000
#define ARK_PKTCHKR_BASE 0x90000
#define ARK_RCPACING_BASE 0xb0000
#define ARK_EXTERNAL_BASE 0x100000
#define ARK_MPU_QOFFSET 0x00100
#define ARK_MAX_PORTS 8
#define offset8(n) n
#define offset16(n) ((n) / 2)
#define offset32(n) ((n) / 4)
#define offset64(n) ((n) / 8)
/* Maximum length of arg list in bytes */
#define ARK_MAX_ARG_LEN 256
/*
* Structure to store private data for each PF/VF instance.
*/
#define def_ptr(type, name) \
union type { \
uint64_t *t64; \
uint32_t *t32; \
uint16_t *t16; \
uint8_t *t8; \
void *v; \
} name
struct ark_adapter {
/* User extension private data */
void *user_data;
int num_ports;
/* Packet generator/checker args */
char pkt_gen_args[ARK_MAX_ARG_LEN];
char pkt_chkr_args[ARK_MAX_ARG_LEN];
uint32_t pkt_dir_v;
/* eth device */
struct rte_eth_dev *eth_dev;
void *d_handle;
/* Our Bar 0 */
uint8_t *bar0;
/* Application Bar */
uint8_t *a_bar;
};
typedef uint32_t *ark_t;
#endif

119
drivers/net/ark/ark_logs.h Normal file
View File

@ -0,0 +1,119 @@
/*-
* BSD LICENSE
*
* Copyright (c) 2015-2017 Atomic Rules LLC
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ARK_DEBUG_H_
#define _ARK_DEBUG_H_
#include <inttypes.h>
#include <rte_log.h>
/* Configuration option to pad TX packets to 60 bytes */
#ifdef RTE_LIBRTE_ARK_PAD_TX
#define ARK_TX_PAD_TO_60 1
#else
#define ARK_TX_PAD_TO_60 0
#endif
/* system camel case definition changed to upper case */
#define PRIU32 PRIu32
#define PRIU64 PRIu64
/* Format specifiers for string data pairs */
#define ARK_SU32 "\n\t%-20s %'20" PRIU32
#define ARK_SU64 "\n\t%-20s %'20" PRIU64
#define ARK_SU64X "\n\t%-20s %#20" PRIx64
#define ARK_SPTR "\n\t%-20s %20p"
#define PMD_DRV_LOG(level, fmt, args...) \
RTE_LOG(level, PMD, fmt, ## args)
/* Conditional trace definitions */
#define ARK_TRACE_ON(level, fmt, ...) \
RTE_LOG(level, PMD, fmt, ##__VA_ARGS__)
/* This pattern allows compiler check arguments even if disabled */
#define ARK_TRACE_OFF(level, fmt, ...) \
do {if (0) RTE_LOG(level, PMD, fmt, ##__VA_ARGS__); } \
while (0)
/* tracing including the function name */
#define ARK_FUNC_ON(level, fmt, args...) \
RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
/* tracing including the function name */
#define ARK_FUNC_OFF(level, fmt, args...) \
do { if (0) RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args); } \
while (0)
/* Debug macro for tracing full behavior, function tracing and messages*/
#ifdef RTE_LIBRTE_ARK_DEBUG_TRACE
#define PMD_FUNC_LOG(level, fmt, ...) ARK_FUNC_ON(level, fmt, ##__VA_ARGS__)
#define PMD_DEBUG_LOG(level, fmt, ...) ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
#else
#define PMD_FUNC_LOG(level, fmt, ...) ARK_FUNC_OFF(level, fmt, ##__VA_ARGS__)
#define PMD_DEBUG_LOG(level, fmt, ...) ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
#endif
/* Debug macro for reporting FPGA statistics */
#ifdef RTE_LIBRTE_ARK_DEBUG_STATS
#define PMD_STATS_LOG(level, fmt, ...) ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
#else
#define PMD_STATS_LOG(level, fmt, ...) ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
#endif
/* Debug macro for RX path */
#ifdef RTE_LIBRTE_ARK_DEBUG_RX
#define ARK_RX_DEBUG 1
#define PMD_RX_LOG(level, fmt, ...) ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
#else
#define ARK_RX_DEBUG 0
#define PMD_RX_LOG(level, fmt, ...) ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
#endif
/* Debug macro for TX path */
#ifdef RTE_LIBRTE_ARK_DEBUG_TX
#define ARK_TX_DEBUG 1
#define PMD_TX_LOG(level, fmt, ...) ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
#else
#define ARK_TX_DEBUG 0
#define PMD_TX_LOG(level, fmt, ...) ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
#endif
#endif

View File

@ -0,0 +1,4 @@
DPDK_17.05 {
local: *;
};

View File

@ -109,6 +109,7 @@ ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
_LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_STACK) += -lrte_mempool_stack
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
_LDLIBS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += -lrte_pmd_ark
_LDLIBS-$(CONFIG_RTE_LIBRTE_AVP_PMD) += -lrte_pmd_avp
_LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += -lrte_pmd_bnx2x -lz
_LDLIBS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += -lrte_pmd_bnxt