diff --git a/config/common_base b/config/common_base
index 070c793999..5ee13e8ca2 100644
--- a/config/common_base
+++ b/config/common_base
@@ -506,7 +506,6 @@ CONFIG_RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS=1024
 # Compile PMD for AESNI backed device
 #
 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
 
 #
 # Compile PMD for Software backed device
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index bb35c66abb..9ae2b54f4e 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -108,7 +108,7 @@ aesni_mb_set_session_auth_parameters(const struct aesni_mb_op_fns *mb_ops,
 	}
 
 	if (xform->type != RTE_CRYPTO_SYM_XFORM_AUTH) {
-		MB_LOG_ERR("Crypto xform struct not of type auth");
+		AESNI_MB_LOG(ERR, "Crypto xform struct not of type auth");
 		return -1;
 	}
 
@@ -161,7 +161,7 @@ aesni_mb_set_session_auth_parameters(const struct aesni_mb_op_fns *mb_ops,
 		hash_oneblock_fn = mb_ops->aux.one_block.sha512;
 		break;
 	default:
-		MB_LOG_ERR("Unsupported authentication algorithm selection");
+		AESNI_MB_LOG(ERR, "Unsupported authentication algorithm selection");
 		return -ENOTSUP;
 	}
 
@@ -190,7 +190,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
 	}
 
 	if (xform->type != RTE_CRYPTO_SYM_XFORM_CIPHER) {
-		MB_LOG_ERR("Crypto xform struct not of type cipher");
+		AESNI_MB_LOG(ERR, "Crypto xform struct not of type cipher");
 		return -EINVAL;
 	}
 
@@ -203,7 +203,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
 		sess->cipher.direction = DECRYPT;
 		break;
 	default:
-		MB_LOG_ERR("Invalid cipher operation parameter");
+		AESNI_MB_LOG(ERR, "Invalid cipher operation parameter");
 		return -EINVAL;
 	}
 
@@ -228,7 +228,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
 		sess->cipher.mode = DOCSIS_DES;
 		break;
 	default:
-		MB_LOG_ERR("Unsupported cipher mode parameter");
+		AESNI_MB_LOG(ERR, "Unsupported cipher mode parameter");
 		return -ENOTSUP;
 	}
 
@@ -252,7 +252,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
 			aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
 			break;
 		default:
-			MB_LOG_ERR("Invalid cipher key length");
+			AESNI_MB_LOG(ERR, "Invalid cipher key length");
 			return -EINVAL;
 		}
 
@@ -263,7 +263,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
 
 	} else {
 		if (xform->cipher.key.length != 8) {
-			MB_LOG_ERR("Invalid cipher key length");
+			AESNI_MB_LOG(ERR, "Invalid cipher key length");
 			return -EINVAL;
 		}
 		sess->cipher.key_length_in_bytes = 8;
@@ -294,7 +294,7 @@ aesni_mb_set_session_aead_parameters(const struct aesni_mb_op_fns *mb_ops,
 		sess->auth.operation = RTE_CRYPTO_AUTH_OP_VERIFY;
 		break;
 	default:
-		MB_LOG_ERR("Invalid aead operation parameter");
+		AESNI_MB_LOG(ERR, "Invalid aead operation parameter");
 		return -EINVAL;
 	}
 
@@ -304,7 +304,7 @@ aesni_mb_set_session_aead_parameters(const struct aesni_mb_op_fns *mb_ops,
 		sess->auth.algo = AES_CCM;
 		break;
 	default:
-		MB_LOG_ERR("Unsupported aead mode parameter");
+		AESNI_MB_LOG(ERR, "Unsupported aead mode parameter");
 		return -ENOTSUP;
 	}
 
@@ -320,7 +320,7 @@ aesni_mb_set_session_aead_parameters(const struct aesni_mb_op_fns *mb_ops,
 		aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
 		break;
 	default:
-		MB_LOG_ERR("Invalid cipher key length");
+		AESNI_MB_LOG(ERR, "Invalid cipher key length");
 		return -EINVAL;
 	}
 
@@ -391,7 +391,7 @@ aesni_mb_set_session_parameters(const struct aesni_mb_op_fns *mb_ops,
 		break;
 	case AESNI_MB_OP_NOT_SUPPORTED:
 	default:
-		MB_LOG_ERR("Unsupported operation chain order parameter");
+		AESNI_MB_LOG(ERR, "Unsupported operation chain order parameter");
 		return -ENOTSUP;
 	}
 
@@ -400,14 +400,14 @@ aesni_mb_set_session_parameters(const struct aesni_mb_op_fns *mb_ops,
 
 	ret = aesni_mb_set_session_auth_parameters(mb_ops, sess, auth_xform);
 	if (ret != 0) {
-		MB_LOG_ERR("Invalid/unsupported authentication parameters");
+		AESNI_MB_LOG(ERR, "Invalid/unsupported authentication parameters");
 		return ret;
 	}
 
 	ret = aesni_mb_set_session_cipher_parameters(mb_ops, sess,
 			cipher_xform);
 	if (ret != 0) {
-		MB_LOG_ERR("Invalid/unsupported cipher parameters");
+		AESNI_MB_LOG(ERR, "Invalid/unsupported cipher parameters");
 		return ret;
 	}
 
@@ -415,7 +415,7 @@ aesni_mb_set_session_parameters(const struct aesni_mb_op_fns *mb_ops,
 		ret = aesni_mb_set_session_aead_parameters(mb_ops, sess,
 				aead_xform);
 		if (ret != 0) {
-			MB_LOG_ERR("Invalid/unsupported aead parameters");
+			AESNI_MB_LOG(ERR, "Invalid/unsupported aead parameters");
 			return ret;
 		}
 	}
@@ -555,7 +555,7 @@ set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
 		char *odata = rte_pktmbuf_append(m_dst,
 				rte_pktmbuf_data_len(op->sym->m_src));
 		if (odata == NULL) {
-			MB_LOG_ERR("failed to allocate space in destination "
+			AESNI_MB_LOG(ERR, "failed to allocate space in destination "
 					"mbuf for source data");
 			op->status = RTE_CRYPTO_OP_STATUS_ERROR;
 			return -1;
@@ -832,13 +832,13 @@ cryptodev_aesni_mb_create(const char *name,
 
 	/* Check CPU for support for AES instruction set */
 	if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_AES)) {
-		MB_LOG_ERR("AES instructions not supported by CPU");
+		AESNI_MB_LOG(ERR, "AES instructions not supported by CPU");
 		return -EFAULT;
 	}
 
 	dev = rte_cryptodev_pmd_create(name, &vdev->device, init_params);
 	if (dev == NULL) {
-		MB_LOG_ERR("failed to create cryptodev vdev");
+		AESNI_MB_LOG(ERR, "failed to create cryptodev vdev");
 		return -ENODEV;
 	}
 
@@ -911,7 +911,7 @@ cryptodev_aesni_mb_probe(struct rte_vdev_device *vdev)
 
 	retval = rte_cryptodev_pmd_parse_input_args(&init_params, args);
 	if (retval) {
-		MB_LOG_ERR("Failed to parse initialisation arguments[%s]\n",
+		AESNI_MB_LOG(ERR, "Failed to parse initialisation arguments[%s]",
 				args);
 		return -EINVAL;
 	}
@@ -952,3 +952,10 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_AESNI_MB_PMD,
 RTE_PMD_REGISTER_CRYPTO_DRIVER(aesni_mb_crypto_drv,
 		cryptodev_aesni_mb_pmd_drv.driver,
 		cryptodev_driver_id);
+
+RTE_INIT(aesni_mb_init_log);
+static void
+aesni_mb_init_log(void)
+{
+	aesni_mb_logtype_driver = rte_log_register("pmd.crypto.aesni_mb");
+}
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
index 01530523f1..6a96d50774 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
@@ -441,12 +441,12 @@ aesni_mb_pmd_qp_create_processed_ops_ring(struct aesni_mb_qp *qp,
 	r = rte_ring_lookup(ring_name);
 	if (r) {
 		if (rte_ring_get_size(r) >= ring_size) {
-			MB_LOG_INFO("Reusing existing ring %s for processed ops",
+			AESNI_MB_LOG(INFO, "Reusing existing ring %s for processed ops",
 			ring_name);
 			return r;
 		}
 
-		MB_LOG_ERR("Unable to reuse existing ring %s for processed ops",
+		AESNI_MB_LOG(ERR, "Unable to reuse existing ring %s for processed ops",
 			ring_name);
 		return NULL;
 	}
@@ -550,20 +550,20 @@ aesni_mb_pmd_session_configure(struct rte_cryptodev *dev,
 	int ret;
 
 	if (unlikely(sess == NULL)) {
-		MB_LOG_ERR("invalid session struct");
+		AESNI_MB_LOG(ERR, "invalid session struct");
 		return -EINVAL;
 	}
 
 	if (rte_mempool_get(mempool, &sess_private_data)) {
-		CDEV_LOG_ERR(
-			"Couldn't get object from session mempool");
+		AESNI_MB_LOG(ERR,
+				"Couldn't get object from session mempool");
 		return -ENOMEM;
 	}
 
 	ret = aesni_mb_set_session_parameters(&job_ops[internals->vector_mode],
 			sess_private_data, xform);
 	if (ret != 0) {
-		MB_LOG_ERR("failed configure session parameters");
+		AESNI_MB_LOG(ERR, "failed configure session parameters");
 
 		/* Return session to mempool */
 		rte_mempool_put(mempool, sess_private_data);
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
index a33b2f6951..bad2a8743a 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
@@ -10,25 +10,14 @@
 #define CRYPTODEV_NAME_AESNI_MB_PMD	crypto_aesni_mb
 /**< AES-NI Multi buffer PMD device name */
 
-#define MB_LOG_ERR(fmt, args...) \
-	RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n",  \
-			RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD), \
-			__func__, __LINE__, ## args)
+/** AESNI_MB PMD LOGTYPE DRIVER */
+int aesni_mb_logtype_driver;
 
-#ifdef RTE_LIBRTE_AESNI_MB_DEBUG
-#define MB_LOG_INFO(fmt, args...) \
-	RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
-			CRYPTODEV_NAME_AESNI_MB_PMD, \
-			__func__, __LINE__, ## args)
+#define AESNI_MB_LOG(level, fmt, ...)  \
+	rte_log(RTE_LOG_ ## level, aesni_mb_logtype_driver,  \
+			"%s() line %u: " fmt "\n", __func__, __LINE__,  \
+					## __VA_ARGS__)
 
-#define MB_LOG_DBG(fmt, args...) \
-	RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
-			CRYPTODEV_NAME_AESNI_MB_PMD, \
-			__func__, __LINE__, ## args)
-#else
-#define MB_LOG_INFO(fmt, args...)
-#define MB_LOG_DBG(fmt, args...)
-#endif
 
 #define HMAC_IPAD_VALUE			(0x36)
 #define HMAC_OPAD_VALUE			(0x5C)