diff --git a/drivers/net/ixgbe/base/ixgbe_82598.c b/drivers/net/ixgbe/base/ixgbe_82598.c index c83e1c6b30..6a7983f178 100644 --- a/drivers/net/ixgbe/base/ixgbe_82598.c +++ b/drivers/net/ixgbe/base/ixgbe_82598.c @@ -38,14 +38,14 @@ STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *sff8472_data); /** - * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout - * @hw: pointer to the HW structure + * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure * - * The defaults for 82598 should be in the range of 50us to 50ms, - * however the hardware default for these parts is 500us to 1ms which is less - * than the 10ms recommended by the pci-e spec. To address this we need to - * increase the value to either 10ms to 250ms for capability version 1 config, - * or 16ms to 55ms for version 2. + * The defaults for 82598 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 250ms for capability version 1 config, + * or 16ms to 55ms for version 2. **/ void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) { @@ -80,11 +80,11 @@ void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) } /** - * ixgbe_init_ops_82598 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure + * ixgbe_init_ops_82598 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure * - * Initialize the function pointers and assign the MAC type for 82598. - * Does not touch the hardware. + * Initialize the function pointers and assign the MAC type for 82598. + * Does not touch the hardware. **/ s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) { @@ -150,12 +150,12 @@ s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) } /** - * ixgbe_init_phy_ops_82598 - PHY/SFP specific init - * @hw: pointer to hardware structure + * ixgbe_init_phy_ops_82598 - PHY/SFP specific init + * @hw: pointer to hardware structure * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. * **/ s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) @@ -214,11 +214,11 @@ s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) } /** - * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure + * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure * - * Starts the hardware using the generic start_hw function. - * Disables relaxed ordering Then set pcie completion timeout + * Starts the hardware using the generic start_hw function. + * Disables relaxed ordering Then set pcie completion timeout * **/ s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) @@ -256,12 +256,12 @@ s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) } /** - * ixgbe_get_link_capabilities_82598 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: boolean auto-negotiation value + * ixgbe_get_link_capabilities_82598 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value * - * Determines the link capabilities by reading the AUTOC register. + * Determines the link capabilities by reading the AUTOC register. **/ STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -317,10 +317,10 @@ STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, } /** - * ixgbe_get_media_type_82598 - Determines media type - * @hw: pointer to hardware structure + * ixgbe_get_media_type_82598 - Determines media type + * @hw: pointer to hardware structure * - * Returns the media type (fiber, copper, backplane) + * Returns the media type (fiber, copper, backplane) **/ STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) { @@ -370,10 +370,10 @@ STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) } /** - * ixgbe_fc_enable_82598 - Enable flow control - * @hw: pointer to hardware structure + * ixgbe_fc_enable_82598 - Enable flow control + * @hw: pointer to hardware structure * - * Enable flow control according to the current settings. + * Enable flow control according to the current settings. **/ s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) { @@ -517,12 +517,12 @@ s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) } /** - * ixgbe_start_mac_link_82598 - Configures MAC link settings - * @hw: pointer to hardware structure - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_start_mac_link_82598 - Configures MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. **/ STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, bool autoneg_wait_to_complete) @@ -566,11 +566,11 @@ STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, } /** - * ixgbe_validate_link_ready - Function looks for phy link - * @hw: pointer to hardware structure + * ixgbe_validate_link_ready - Function looks for phy link + * @hw: pointer to hardware structure * - * Function indicates success when phy link is available. If phy is not ready - * within 5 seconds of MAC indicating link, the function returns error. + * Function indicates success when phy link is available. If phy is not ready + * within 5 seconds of MAC indicating link, the function returns error. **/ STATIC s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) { @@ -601,13 +601,13 @@ STATIC s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) } /** - * ixgbe_check_mac_link_82598 - Get link/speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true is link is up, false otherwise - * @link_up_wait_to_complete: bool used to wait for link up or not + * ixgbe_check_mac_link_82598 - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @link_up_wait_to_complete: bool used to wait for link up or not * - * Reads the links register to determine if link is up and the current speed + * Reads the links register to determine if link is up and the current speed **/ STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up, @@ -691,12 +691,12 @@ STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, } /** - * ixgbe_setup_mac_link_82598 - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_82598 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Set the link speed in the AUTOC register and restarts link. + * Set the link speed in the AUTOC register and restarts link. **/ STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -745,12 +745,12 @@ STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, /** - * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true if waiting is needed to complete + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true if waiting is needed to complete * - * Sets the link speed in the AUTOC register in the MAC and restarts link. + * Sets the link speed in the AUTOC register in the MAC and restarts link. **/ STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -770,12 +770,12 @@ STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, } /** - * ixgbe_reset_hw_82598 - Performs hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw_82598 - Performs hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks and - * clears all interrupts, performing a PHY reset, and performing a link (MAC) - * reset. + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performing a PHY reset, and performing a link (MAC) + * reset. **/ STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) { @@ -908,10 +908,10 @@ STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) } /** - * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq set index + * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq set index **/ s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -934,10 +934,10 @@ s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq clear index (not used in 82598, but elsewhere) + * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq clear index (not used in 82598, but elsewhere) **/ STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -962,14 +962,14 @@ STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * ixgbe_set_vfta_82598 - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFTA - * @vlan_on: boolean flag to turn on/off VLAN in VFTA - * @vlvf_bypass: boolean flag - unused + * ixgbe_set_vfta_82598 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * @vlvf_bypass: boolean flag - unused * - * Turn on/off specified VLAN in the VLAN filter table. + * Turn on/off specified VLAN in the VLAN filter table. **/ s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, bool vlvf_bypass) @@ -1015,10 +1015,10 @@ s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, } /** - * ixgbe_clear_vfta_82598 - Clear VLAN filter table - * @hw: pointer to hardware structure + * ixgbe_clear_vfta_82598 - Clear VLAN filter table + * @hw: pointer to hardware structure * - * Clears the VLAN filer table, and the VMDq index associated with the filter + * Clears the VLAN filer table, and the VMDq index associated with the filter **/ STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) { @@ -1039,12 +1039,12 @@ STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) } /** - * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value + * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value * - * Performs read operation to Atlas analog register specified. + * Performs read operation to Atlas analog register specified. **/ s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) { @@ -1063,12 +1063,12 @@ s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) } /** - * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register - * @hw: pointer to hardware structure - * @reg: atlas register to write - * @val: value to write + * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write * - * Performs write operation to Atlas analog register specified. + * Performs write operation to Atlas analog register specified. **/ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) { @@ -1085,13 +1085,13 @@ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. - * @hw: pointer to hardware structure - * @dev_addr: address to read from - * @byte_offset: byte offset to read from dev_addr - * @eeprom_data: value read + * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @dev_addr: address to read from + * @byte_offset: byte offset to read from dev_addr + * @eeprom_data: value read * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. **/ STATIC s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, u8 byte_offset, u8 *eeprom_data) @@ -1159,12 +1159,12 @@ STATIC s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, } /** - * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) @@ -1174,12 +1174,12 @@ s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. - * @hw: pointer to hardware structure - * @byte_offset: byte offset at address 0xA2 - * @sff8472_data: value read + * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @sff8472_data: value read * - * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C + * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C **/ STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *sff8472_data) @@ -1189,10 +1189,10 @@ STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type - * @hw: pointer to hardware structure + * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type + * @hw: pointer to hardware structure * - * Determines physical layer capabilities of the current configuration. + * Determines physical layer capabilities of the current configuration. **/ u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) { @@ -1291,12 +1291,12 @@ u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) } /** - * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple - * port devices. - * @hw: pointer to the HW structure + * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple + * port devices. + * @hw: pointer to the HW structure * - * Calls common function and corrects issue with some single port devices - * that enable LAN1 but not LAN0. + * Calls common function and corrects issue with some single port devices + * that enable LAN1 but not LAN0. **/ void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) { @@ -1325,8 +1325,8 @@ void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) } /** - * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering - * @hw: pointer to hardware structure + * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering + * @hw: pointer to hardware structure * **/ void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw) @@ -1395,11 +1395,11 @@ STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, } /** - * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL + * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL * - * Enables the Rx DMA unit + * Enables the Rx DMA unit **/ s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval) { diff --git a/drivers/net/ixgbe/base/ixgbe_82599.c b/drivers/net/ixgbe/base/ixgbe_82599.c index 9cd0b1428c..1932337462 100644 --- a/drivers/net/ixgbe/base/ixgbe_82599.c +++ b/drivers/net/ixgbe/base/ixgbe_82599.c @@ -71,12 +71,12 @@ void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) } /** - * ixgbe_init_phy_ops_82599 - PHY/SFP specific init - * @hw: pointer to hardware structure + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. * **/ s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) @@ -205,14 +205,14 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) } /** - * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read - * @hw: pointer to hardware structure - * @locked: Return the if we locked for this read. - * @reg_val: Value we read from AUTOC + * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read + * @hw: pointer to hardware structure + * @locked: Return the if we locked for this read. + * @reg_val: Value we read from AUTOC * - * For this part (82599) we need to wrap read-modify-writes with a possible - * FW/SW lock. It is assumed this lock will be freed with the next - * prot_autoc_write_82599(). + * For this part (82599) we need to wrap read-modify-writes with a possible + * FW/SW lock. It is assumed this lock will be freed with the next + * prot_autoc_write_82599(). */ s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) { @@ -238,7 +238,7 @@ s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) * @hw: pointer to hardware structure * @autoc: value to write to AUTOC * @locked: bool to indicate whether the SW/FW lock was already taken by - * previous proc_autoc_read_82599. + * previous proc_autoc_read_82599. * * This part (82599) may need to hold the SW/FW lock around all writes to * AUTOC. Likewise after a write we need to do a pipeline reset. @@ -278,11 +278,11 @@ s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked) } /** - * ixgbe_init_ops_82599 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure + * ixgbe_init_ops_82599 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure * - * Initialize the function pointers and assign the MAC type for 82599. - * Does not touch the hardware. + * Initialize the function pointers and assign the MAC type for 82599. + * Does not touch the hardware. **/ s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) @@ -372,12 +372,12 @@ s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) } /** - * ixgbe_get_link_capabilities_82599 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: true when autoneg or autotry is enabled + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled * - * Determines the link capabilities by reading the AUTOC register. + * Determines the link capabilities by reading the AUTOC register. **/ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -486,10 +486,10 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, } /** - * ixgbe_get_media_type_82599 - Get media type - * @hw: pointer to hardware structure + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure * - * Returns the media type (fiber, copper, backplane) + * Returns the media type (fiber, copper, backplane) **/ enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) { @@ -543,10 +543,10 @@ enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) } /** - * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3 - * @hw: pointer to hardware structure + * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3 + * @hw: pointer to hardware structure * - * Disables link during D3 power down sequence. + * Disables link during D3 power down sequence. * **/ void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) @@ -566,12 +566,12 @@ void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) } /** - * ixgbe_start_mac_link_82599 - Setup MAC link settings - * @hw: pointer to hardware structure - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_start_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. **/ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, bool autoneg_wait_to_complete) @@ -634,12 +634,12 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, } /** - * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser - * @hw: pointer to hardware structure + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively shutting down the Tx - * laser on the PHY, effectively halting physical link. + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. **/ void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { @@ -657,12 +657,12 @@ void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser - * @hw: pointer to hardware structure + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively turning on the Tx - * laser on the PHY, effectively starting physical link. + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. **/ void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { @@ -676,16 +676,16 @@ void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser - * @hw: pointer to hardware structure + * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser + * @hw: pointer to hardware structure * - * When the driver changes the link speeds that it can support, - * it sets autotry_restart to true to indicate that we need to - * initiate a new autotry session with the link partner. To do - * so, we set the speed then disable and re-enable the Tx laser, to - * alert the link partner that it also needs to restart autotry on its - * end. This is consistent with true clause 37 autoneg, which also - * involves a loss of signal. + * When the driver changes the link speeds that it can support, + * it sets autotry_restart to true to indicate that we need to + * initiate a new autotry session with the link partner. To do + * so, we set the speed then disable and re-enable the Tx laser, to + * alert the link partner that it also needs to restart autotry on its + * end. This is consistent with true clause 37 autoneg, which also + * involves a loss of signal. **/ void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { @@ -703,11 +703,11 @@ void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_set_hard_rate_select_speed - Set module link speed - * @hw: pointer to hardware structure - * @speed: link speed to set + * ixgbe_set_hard_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set * - * Set module link speed via RS0/RS1 rate select pins. + * Set module link speed via RS0/RS1 rate select pins. */ void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) @@ -732,12 +732,12 @@ void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, } /** - * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Implements the Intel SmartSpeed algorithm. + * Implements the Intel SmartSpeed algorithm. **/ s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -844,12 +844,12 @@ s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, } /** - * ixgbe_setup_mac_link_82599 - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Set the link speed in the AUTOC register and restarts link. + * Set the link speed in the AUTOC register and restarts link. **/ s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -962,12 +962,12 @@ s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, } /** - * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true if waiting is needed to complete + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true if waiting is needed to complete * - * Restarts link on PHY and MAC based on settings passed in. + * Restarts link on PHY and MAC based on settings passed in. **/ STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -987,12 +987,12 @@ STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, } /** - * ixgbe_reset_hw_82599 - Perform hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, perform a PHY reset, and perform a link (MAC) - * reset. + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. **/ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) { @@ -1188,8 +1188,8 @@ STATIC s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) } /** - * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. - * @hw: pointer to hardware structure + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure **/ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) { @@ -1261,9 +1261,9 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) } /** - * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register + * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register **/ STATIC void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) { @@ -1302,9 +1302,9 @@ STATIC void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) } /** - * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially + * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially * contains just the value of the Rx packet buffer allocation **/ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) @@ -1328,11 +1328,11 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) } /** - * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially + * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially * contains just the value of the Rx packet buffer allocation - * @cloud_mode: true - cloud mode, false - other mode + * @cloud_mode: true - cloud mode, false - other mode **/ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl, bool cloud_mode) @@ -1367,9 +1367,9 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl, } /** - * ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue - * @hw: pointer to hardware structure - * @dropqueue: Rx queue index used for the dropped packets + * ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue + * @hw: pointer to hardware structure + * @dropqueue: Rx queue index used for the dropped packets **/ void ixgbe_set_fdir_drop_queue_82599(struct ixgbe_hw *hw, u8 dropqueue) { @@ -1425,15 +1425,15 @@ do { \ } while (0) /** - * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash - * @input: input bitstream to compute the hash on - * @common: compressed common input dword + * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash + * @input: input bitstream to compute the hash on + * @common: compressed common input dword * - * This function is almost identical to the function above but contains - * several optimizations such as unwinding all of the loops, letting the - * compiler work out all of the conditional ifs since the keys are static - * defines, and computing two keys at once since the hashed dword stream - * will be the same for both keys. + * This function is almost identical to the function above but contains + * several optimizations such as unwinding all of the loops, letting the + * compiler work out all of the conditional ifs since the keys are static + * defines, and computing two keys at once since the hashed dword stream + * will be the same for both keys. **/ u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, union ixgbe_atr_hash_dword common) @@ -1492,11 +1492,11 @@ u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, } /** - * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter - * @hw: pointer to hardware structure - * @input: unique input dword - * @common: compressed common input dword - * @queue: queue index to direct traffic to + * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter + * @hw: pointer to hardware structure + * @input: unique input dword + * @common: compressed common input dword + * @queue: queue index to direct traffic to * * Note that the tunnel bit in input must not be set when the hardware * tunneling support does not exist. @@ -1565,15 +1565,15 @@ do { \ } while (0) /** - * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash - * @input: input bitstream to compute the hash on - * @input_mask: mask for the input bitstream + * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash + * @input: input bitstream to compute the hash on + * @input_mask: mask for the input bitstream * - * This function serves two main purposes. First it applies the input_mask - * to the atr_input resulting in a cleaned up atr_input data stream. - * Secondly it computes the hash and stores it in the bkt_hash field at - * the end of the input byte stream. This way it will be available for - * future use without needing to recompute the hash. + * This function serves two main purposes. First it applies the input_mask + * to the atr_input resulting in a cleaned up atr_input data stream. + * Secondly it computes the hash and stores it in the bkt_hash field at + * the end of the input byte stream. This way it will be available for + * future use without needing to recompute the hash. **/ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, union ixgbe_atr_input *input_mask) @@ -1624,13 +1624,13 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, } /** - * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks - * @input_mask: mask to be bit swapped + * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks + * @input_mask: mask to be bit swapped * - * The source and destination port masks for flow director are bit swapped - * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to - * generate a correctly swapped value we need to bit swap the mask and that - * is what is accomplished by this function. + * The source and destination port masks for flow director are bit swapped + * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to + * generate a correctly swapped value we need to bit swap the mask and that + * is what is accomplished by this function. **/ STATIC u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) { @@ -1963,16 +1963,16 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, } /** - * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter - * @hw: pointer to hardware structure - * @input: input bitstream - * @input_mask: mask for the input bitstream - * @soft_id: software index for the filters - * @queue: queue index to direct traffic to - * @cloud_mode: unused + * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter + * @hw: pointer to hardware structure + * @input: input bitstream + * @input_mask: mask for the input bitstream + * @soft_id: software index for the filters + * @queue: queue index to direct traffic to + * @cloud_mode: unused * - * Note that the caller to this function must lock before calling, since the - * hardware writes must be protected from one another. + * Note that the caller to this function must lock before calling, since the + * hardware writes must be protected from one another. **/ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, union ixgbe_atr_input *input, @@ -2030,12 +2030,12 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, } /** - * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value * - * Performs read operation to Omer analog register specified. + * Performs read operation to Omer analog register specified. **/ s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) { @@ -2054,12 +2054,12 @@ s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) } /** - * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: atlas register to write - * @val: value to write + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write * - * Performs write operation to Omer analog register specified. + * Performs write operation to Omer analog register specified. **/ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) { @@ -2076,12 +2076,12 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure + * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure * - * Starts the hardware using the generic start_hw function - * and the generation start_hw function. - * Then performs revision-specific operations, if any. + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. **/ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) { @@ -2107,12 +2107,12 @@ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) } /** - * ixgbe_identify_phy_82599 - Get physical layer module - * @hw: pointer to hardware structure + * ixgbe_identify_phy_82599 - Get physical layer module + * @hw: pointer to hardware structure * - * Determines the physical layer module found on the current adapter. - * If PHY already detected, maintains current PHY type in hw struct, - * otherwise executes the PHY detection routine. + * Determines the physical layer module found on the current adapter. + * If PHY already detected, maintains current PHY type in hw struct, + * otherwise executes the PHY detection routine. **/ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) { @@ -2144,10 +2144,10 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) } /** - * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type - * @hw: pointer to hardware structure + * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type + * @hw: pointer to hardware structure * - * Determines physical layer capabilities of the current configuration. + * Determines physical layer capabilities of the current configuration. **/ u64 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) { @@ -2231,11 +2231,11 @@ u64 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) } /** - * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL + * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL * - * Enables the Rx DMA unit for 82599 + * Enables the Rx DMA unit for 82599 **/ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) { @@ -2262,14 +2262,14 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) } /** - * ixgbe_verify_fw_version_82599 - verify FW version for 82599 - * @hw: pointer to hardware structure + * ixgbe_verify_fw_version_82599 - verify FW version for 82599 + * @hw: pointer to hardware structure * - * Verifies that installed the firmware version is 0.6 or higher - * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. + * Verifies that installed the firmware version is 0.6 or higher + * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. * - * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or - * if the FW version is not supported. + * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or + * if the FW version is not supported. **/ STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) { @@ -2326,11 +2326,11 @@ STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) } /** - * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. - * @hw: pointer to hardware structure + * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. + * @hw: pointer to hardware structure * - * Returns true if the LESM FW module is present and enabled. Otherwise - * returns false. Smart Speed must be disabled if LESM FW module is enabled. + * Returns true if the LESM FW module is present and enabled. Otherwise + * returns false. Smart Speed must be disabled if LESM FW module is enabled. **/ bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) { @@ -2370,15 +2370,15 @@ bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) } /** - * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using - * fastest available method + * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using + * fastest available method * - * @hw: pointer to hardware structure - * @offset: offset of word in EEPROM to read - * @words: number of words - * @data: word(s) read from the EEPROM + * @hw: pointer to hardware structure + * @offset: offset of word in EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM * - * Retrieves 16 bit word(s) read from EEPROM + * Retrieves 16 bit word(s) read from EEPROM **/ STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -2405,14 +2405,14 @@ STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_read_eeprom_82599 - Read EEPROM word using - * fastest available method + * ixgbe_read_eeprom_82599 - Read EEPROM word using + * fastest available method * - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM * - * Reads a 16 bit word from the EEPROM + * Reads a 16 bit word from the EEPROM **/ STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, u16 offset, u16 *data) @@ -2438,7 +2438,7 @@ STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, /** * ixgbe_reset_pipeline_82599 - perform pipeline reset * - * @hw: pointer to hardware structure + * @hw: pointer to hardware structure * * Reset pipeline by asserting Restart_AN together with LMS change to ensure * full pipeline reset. This function assumes the SW/FW lock is held. @@ -2487,14 +2487,14 @@ s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) } /** - * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: address to read from - * @data: value read + * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: address to read from + * @data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) @@ -2545,14 +2545,14 @@ STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: address to read from - * @data: value to write + * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: address to read from + * @data: value to write * - * Performs byte write operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) diff --git a/drivers/net/ixgbe/base/ixgbe_api.c b/drivers/net/ixgbe/base/ixgbe_api.c index 0a22df3d06..b322c181b4 100644 --- a/drivers/net/ixgbe/base/ixgbe_api.c +++ b/drivers/net/ixgbe/base/ixgbe_api.c @@ -41,16 +41,16 @@ void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map) } /** - * ixgbe_init_shared_code - Initialize the shared code - * @hw: pointer to hardware structure + * ixgbe_init_shared_code - Initialize the shared code + * @hw: pointer to hardware structure * - * This will assign function pointers and assign the MAC type and PHY code. - * Does not touch the hardware. This function must be called prior to any - * other function in the shared code. The ixgbe_hw structure should be - * memset to 0 prior to calling this function. The following fields in - * hw structure should be filled in prior to calling this function: - * hw_addr, back, device_id, vendor_id, subsystem_device_id, - * subsystem_vendor_id, and revision_id + * This will assign function pointers and assign the MAC type and PHY code. + * Does not touch the hardware. This function must be called prior to any + * other function in the shared code. The ixgbe_hw structure should be + * memset to 0 prior to calling this function. The following fields in + * hw structure should be filled in prior to calling this function: + * hw_addr, back, device_id, vendor_id, subsystem_device_id, + * subsystem_vendor_id, and revision_id **/ s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) { @@ -99,11 +99,11 @@ s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) } /** - * ixgbe_set_mac_type - Sets MAC type - * @hw: pointer to the HW structure + * ixgbe_set_mac_type - Sets MAC type + * @hw: pointer to the HW structure * - * This function sets the mac type of the adapter based on the - * vendor ID and device ID stored in the hw structure. + * This function sets the mac type of the adapter based on the + * vendor ID and device ID stored in the hw structure. **/ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) { @@ -222,10 +222,10 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) } /** - * ixgbe_init_hw - Initialize the hardware - * @hw: pointer to hardware structure + * ixgbe_init_hw - Initialize the hardware + * @hw: pointer to hardware structure * - * Initialize the hardware by resetting and then starting the hardware + * Initialize the hardware by resetting and then starting the hardware **/ s32 ixgbe_init_hw(struct ixgbe_hw *hw) { @@ -234,11 +234,11 @@ s32 ixgbe_init_hw(struct ixgbe_hw *hw) } /** - * ixgbe_reset_hw - Performs a hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw - Performs a hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks and - * clears all interrupts, performs a PHY reset, and performs a MAC reset + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performs a PHY reset, and performs a MAC reset **/ s32 ixgbe_reset_hw(struct ixgbe_hw *hw) { @@ -247,14 +247,14 @@ s32 ixgbe_reset_hw(struct ixgbe_hw *hw) } /** - * ixgbe_start_hw - Prepares hardware for Rx/Tx - * @hw: pointer to hardware structure + * ixgbe_start_hw - Prepares hardware for Rx/Tx + * @hw: pointer to hardware structure * - * Starts the hardware by filling the bus info structure and media type, - * clears all on chip counters, initializes receive address registers, - * multicast table, VLAN filter table, calls routine to setup link and - * flow control settings, and leaves transmit and receive units disabled - * and uninitialized. + * Starts the hardware by filling the bus info structure and media type, + * clears all on chip counters, initializes receive address registers, + * multicast table, VLAN filter table, calls routine to setup link and + * flow control settings, and leaves transmit and receive units disabled + * and uninitialized. **/ s32 ixgbe_start_hw(struct ixgbe_hw *hw) { @@ -263,12 +263,12 @@ s32 ixgbe_start_hw(struct ixgbe_hw *hw) } /** - * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering, - * which is disabled by default in ixgbe_start_hw(); + * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering, + * which is disabled by default in ixgbe_start_hw(); * - * @hw: pointer to hardware structure + * @hw: pointer to hardware structure * - * Enable relaxed ordering; + * Enable relaxed ordering; **/ void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw) { @@ -277,11 +277,11 @@ void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw) } /** - * ixgbe_clear_hw_cntrs - Clear hardware counters - * @hw: pointer to hardware structure + * ixgbe_clear_hw_cntrs - Clear hardware counters + * @hw: pointer to hardware structure * - * Clears all hardware statistics counters by reading them from the hardware - * Statistics counters are clear on read. + * Clears all hardware statistics counters by reading them from the hardware + * Statistics counters are clear on read. **/ s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw) { @@ -290,10 +290,10 @@ s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw) } /** - * ixgbe_get_media_type - Get media type - * @hw: pointer to hardware structure + * ixgbe_get_media_type - Get media type + * @hw: pointer to hardware structure * - * Returns the media type (fiber, copper, backplane) + * Returns the media type (fiber, copper, backplane) **/ enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw) { @@ -302,14 +302,14 @@ enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw) } /** - * ixgbe_get_mac_addr - Get MAC address - * @hw: pointer to hardware structure - * @mac_addr: Adapter MAC address + * ixgbe_get_mac_addr - Get MAC address + * @hw: pointer to hardware structure + * @mac_addr: Adapter MAC address * - * Reads the adapter's MAC address from the first Receive Address Register - * (RAR0) A reset of the adapter must have been performed prior to calling - * this function in order for the MAC address to have been loaded from the - * EEPROM into RAR0 + * Reads the adapter's MAC address from the first Receive Address Register + * (RAR0) A reset of the adapter must have been performed prior to calling + * this function in order for the MAC address to have been loaded from the + * EEPROM into RAR0 **/ s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr) { @@ -318,12 +318,12 @@ s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr) } /** - * ixgbe_get_san_mac_addr - Get SAN MAC address - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address + * ixgbe_get_san_mac_addr - Get SAN MAC address + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address * - * Reads the SAN MAC address from the EEPROM, if it's available. This is - * per-port, so set_lan_id() must be called before reading the addresses. + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. **/ s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) { @@ -332,11 +332,11 @@ s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) } /** - * ixgbe_set_san_mac_addr - Write a SAN MAC address - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address + * ixgbe_set_san_mac_addr - Write a SAN MAC address + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address * - * Writes A SAN MAC address to the EEPROM. + * Writes A SAN MAC address to the EEPROM. **/ s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) { @@ -345,11 +345,11 @@ s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) } /** - * ixgbe_get_device_caps - Get additional device capabilities - * @hw: pointer to hardware structure - * @device_caps: the EEPROM word for device capabilities + * ixgbe_get_device_caps - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word for device capabilities * - * Reads the extra device capabilities from the EEPROM + * Reads the extra device capabilities from the EEPROM **/ s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps) { @@ -358,13 +358,13 @@ s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps) } /** - * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM - * @hw: pointer to hardware structure - * @wwnn_prefix: the alternative WWNN prefix - * @wwpn_prefix: the alternative WWPN prefix + * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM + * @hw: pointer to hardware structure + * @wwnn_prefix: the alternative WWNN prefix + * @wwpn_prefix: the alternative WWPN prefix * - * This function will read the EEPROM from the alternative SAN MAC address - * block to check the support for the alternative WWNN/WWPN prefix support. + * This function will read the EEPROM from the alternative SAN MAC address + * block to check the support for the alternative WWNN/WWPN prefix support. **/ s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, u16 *wwpn_prefix) @@ -375,11 +375,11 @@ s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, } /** - * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM - * @hw: pointer to hardware structure - * @bs: the fcoe boot status + * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM + * @hw: pointer to hardware structure + * @bs: the fcoe boot status * - * This function will read the FCOE boot status from the iSCSI FCOE block + * This function will read the FCOE boot status from the iSCSI FCOE block **/ s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs) { @@ -389,10 +389,10 @@ s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs) } /** - * ixgbe_get_bus_info - Set PCI bus info - * @hw: pointer to hardware structure + * ixgbe_get_bus_info - Set PCI bus info + * @hw: pointer to hardware structure * - * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure + * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure **/ s32 ixgbe_get_bus_info(struct ixgbe_hw *hw) { @@ -401,10 +401,10 @@ s32 ixgbe_get_bus_info(struct ixgbe_hw *hw) } /** - * ixgbe_get_num_of_tx_queues - Get Tx queues - * @hw: pointer to hardware structure + * ixgbe_get_num_of_tx_queues - Get Tx queues + * @hw: pointer to hardware structure * - * Returns the number of transmit queues for the given adapter. + * Returns the number of transmit queues for the given adapter. **/ u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw) { @@ -412,10 +412,10 @@ u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw) } /** - * ixgbe_get_num_of_rx_queues - Get Rx queues - * @hw: pointer to hardware structure + * ixgbe_get_num_of_rx_queues - Get Rx queues + * @hw: pointer to hardware structure * - * Returns the number of receive queues for the given adapter. + * Returns the number of receive queues for the given adapter. **/ u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw) { @@ -423,13 +423,13 @@ u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw) } /** - * ixgbe_stop_adapter - Disable Rx/Tx units - * @hw: pointer to hardware structure + * ixgbe_stop_adapter - Disable Rx/Tx units + * @hw: pointer to hardware structure * - * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, - * disables transmit and receive units. The adapter_stopped flag is used by - * the shared code and drivers to determine if the adapter is in a stopped - * state and should not touch the hardware. + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. **/ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw) { @@ -438,12 +438,12 @@ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw) } /** - * ixgbe_read_pba_string - Reads part number string from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number string from the EEPROM - * @pba_num_size: part number string buffer length + * ixgbe_read_pba_string - Reads part number string from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number string from the EEPROM + * @pba_num_size: part number string buffer length * - * Reads the part number string from the EEPROM. + * Reads the part number string from the EEPROM. **/ s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) { @@ -451,11 +451,11 @@ s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) } /** - * ixgbe_read_pba_num - Reads part number from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number from the EEPROM + * ixgbe_read_pba_num - Reads part number from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number from the EEPROM * - * Reads the part number from the EEPROM. + * Reads the part number from the EEPROM. **/ s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num) { @@ -463,10 +463,10 @@ s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num) } /** - * ixgbe_identify_phy - Get PHY type - * @hw: pointer to hardware structure + * ixgbe_identify_phy - Get PHY type + * @hw: pointer to hardware structure * - * Determines the physical layer module found on the current adapter. + * Determines the physical layer module found on the current adapter. **/ s32 ixgbe_identify_phy(struct ixgbe_hw *hw) { @@ -481,8 +481,8 @@ s32 ixgbe_identify_phy(struct ixgbe_hw *hw) } /** - * ixgbe_reset_phy - Perform a PHY reset - * @hw: pointer to hardware structure + * ixgbe_reset_phy - Perform a PHY reset + * @hw: pointer to hardware structure **/ s32 ixgbe_reset_phy(struct ixgbe_hw *hw) { @@ -501,9 +501,9 @@ s32 ixgbe_reset_phy(struct ixgbe_hw *hw) } /** - * ixgbe_get_phy_firmware_version - - * @hw: pointer to hardware structure - * @firmware_version: pointer to firmware version + * ixgbe_get_phy_firmware_version - + * @hw: pointer to hardware structure + * @firmware_version: pointer to firmware version **/ s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version) { @@ -516,13 +516,13 @@ s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version) } /** - * ixgbe_read_phy_reg - Read PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @device_type: type of device you want to communicate with - * @phy_data: Pointer to read data from PHY register + * ixgbe_read_phy_reg - Read PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: type of device you want to communicate with + * @phy_data: Pointer to read data from PHY register * - * Reads a value from a specified PHY register + * Reads a value from a specified PHY register **/ s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) @@ -535,13 +535,13 @@ s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, } /** - * ixgbe_write_phy_reg - Write PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: type of device you want to communicate with - * @phy_data: Data to write to the PHY register + * ixgbe_write_phy_reg - Write PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: type of device you want to communicate with + * @phy_data: Data to write to the PHY register * - * Writes a value to specified PHY register + * Writes a value to specified PHY register **/ s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) @@ -554,10 +554,10 @@ s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, } /** - * ixgbe_setup_phy_link - Restart PHY autoneg - * @hw: pointer to hardware structure + * ixgbe_setup_phy_link - Restart PHY autoneg + * @hw: pointer to hardware structure * - * Restart autonegotiation and PHY and waits for completion. + * Restart autonegotiation and PHY and waits for completion. **/ s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw) { @@ -580,13 +580,13 @@ s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw) } /** - * ixgbe_check_phy_link - Determine link and speed status - * @hw: pointer to hardware structure - * @speed: link speed - * @link_up: true when link is up + * ixgbe_check_phy_link - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: link speed + * @link_up: true when link is up * - * Reads a PHY register to determine if link is up and the current speed for - * the PHY. + * Reads a PHY register to determine if link is up and the current speed for + * the PHY. **/ s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up) @@ -596,12 +596,12 @@ s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, } /** - * ixgbe_setup_phy_link_speed - Set auto advertise - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_phy_link_speed - Set auto advertise + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Sets the auto advertised capabilities + * Sets the auto advertised capabilities **/ s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete) @@ -623,13 +623,13 @@ s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on) } /** - * ixgbe_check_link - Get link and speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true when link is up - * @link_up_wait_to_complete: bool used to wait for link up or not + * ixgbe_check_link - Get link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not * - * Reads the links register to determine if link is up and the current speed + * Reads the links register to determine if link is up and the current speed **/ s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up, bool link_up_wait_to_complete) @@ -640,10 +640,10 @@ s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, } /** - * ixgbe_disable_tx_laser - Disable Tx laser - * @hw: pointer to hardware structure + * ixgbe_disable_tx_laser - Disable Tx laser + * @hw: pointer to hardware structure * - * If the driver needs to disable the laser on SFI optics. + * If the driver needs to disable the laser on SFI optics. **/ void ixgbe_disable_tx_laser(struct ixgbe_hw *hw) { @@ -652,10 +652,10 @@ void ixgbe_disable_tx_laser(struct ixgbe_hw *hw) } /** - * ixgbe_enable_tx_laser - Enable Tx laser - * @hw: pointer to hardware structure + * ixgbe_enable_tx_laser - Enable Tx laser + * @hw: pointer to hardware structure * - * If the driver needs to enable the laser on SFI optics. + * If the driver needs to enable the laser on SFI optics. **/ void ixgbe_enable_tx_laser(struct ixgbe_hw *hw) { @@ -664,12 +664,12 @@ void ixgbe_enable_tx_laser(struct ixgbe_hw *hw) } /** - * ixgbe_flap_tx_laser - flap Tx laser to start autotry process - * @hw: pointer to hardware structure + * ixgbe_flap_tx_laser - flap Tx laser to start autotry process + * @hw: pointer to hardware structure * - * When the driver changes the link speeds that it can support then - * flap the tx laser to alert the link partner to start autotry - * process on its end. + * When the driver changes the link speeds that it can support then + * flap the tx laser to alert the link partner to start autotry + * process on its end. **/ void ixgbe_flap_tx_laser(struct ixgbe_hw *hw) { @@ -678,13 +678,13 @@ void ixgbe_flap_tx_laser(struct ixgbe_hw *hw) } /** - * ixgbe_setup_link - Set link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_link - Set link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Configures link settings. Restarts the link. - * Performs autonegotiation if needed. + * Configures link settings. Restarts the link. + * Performs autonegotiation if needed. **/ s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete) @@ -695,13 +695,13 @@ s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, } /** - * ixgbe_setup_mac_link - Set link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link - Set link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Configures link settings. Restarts the link. - * Performs autonegotiation if needed. + * Configures link settings. Restarts the link. + * Performs autonegotiation if needed. **/ s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete) @@ -712,12 +712,12 @@ s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, } /** - * ixgbe_get_link_capabilities - Returns link capabilities - * @hw: pointer to hardware structure - * @speed: link speed capabilities - * @autoneg: true when autoneg or autotry is enabled + * ixgbe_get_link_capabilities - Returns link capabilities + * @hw: pointer to hardware structure + * @speed: link speed capabilities + * @autoneg: true when autoneg or autotry is enabled * - * Determines the link capabilities of the current configuration. + * Determines the link capabilities of the current configuration. **/ s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *autoneg) @@ -727,11 +727,11 @@ s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, } /** - * ixgbe_led_on - Turn on LEDs - * @hw: pointer to hardware structure - * @index: led number to turn on + * ixgbe_led_on - Turn on LEDs + * @hw: pointer to hardware structure + * @index: led number to turn on * - * Turns on the software controllable LEDs. + * Turns on the software controllable LEDs. **/ s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) { @@ -740,11 +740,11 @@ s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_led_off - Turn off LEDs - * @hw: pointer to hardware structure - * @index: led number to turn off + * ixgbe_led_off - Turn off LEDs + * @hw: pointer to hardware structure + * @index: led number to turn off * - * Turns off the software controllable LEDs. + * Turns off the software controllable LEDs. **/ s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) { @@ -753,11 +753,11 @@ s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_blink_led_start - Blink LEDs - * @hw: pointer to hardware structure - * @index: led number to blink + * ixgbe_blink_led_start - Blink LEDs + * @hw: pointer to hardware structure + * @index: led number to blink * - * Blink LED based on index. + * Blink LED based on index. **/ s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index) { @@ -766,11 +766,11 @@ s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_blink_led_stop - Stop blinking LEDs - * @hw: pointer to hardware structure - * @index: led number to stop + * ixgbe_blink_led_stop - Stop blinking LEDs + * @hw: pointer to hardware structure + * @index: led number to stop * - * Stop blinking LED based on index. + * Stop blinking LED based on index. **/ s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index) { @@ -779,11 +779,11 @@ s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_init_eeprom_params - Initialize EEPROM parameters - * @hw: pointer to hardware structure + * ixgbe_init_eeprom_params - Initialize EEPROM parameters + * @hw: pointer to hardware structure * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. **/ s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw) { @@ -793,14 +793,14 @@ s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw) /** - * ixgbe_write_eeprom - Write word to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM + * ixgbe_write_eeprom - Write word to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM * - * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not - * called after this function, the EEPROM will most likely contain an - * invalid checksum. + * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not + * called after this function, the EEPROM will most likely contain an + * invalid checksum. **/ s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data) { @@ -809,15 +809,15 @@ s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data) } /** - * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word(s) to be written to the EEPROM - * @words: number of words + * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word(s) to be written to the EEPROM + * @words: number of words * - * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not - * called after this function, the EEPROM will most likely contain an - * invalid checksum. + * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not + * called after this function, the EEPROM will most likely contain an + * invalid checksum. **/ s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -828,12 +828,12 @@ s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words, } /** - * ixgbe_read_eeprom - Read word from EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM + * ixgbe_read_eeprom - Read word from EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM * - * Reads 16 bit value from EEPROM + * Reads 16 bit value from EEPROM **/ s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data) { @@ -842,13 +842,13 @@ s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data) } /** - * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit word(s) from EEPROM - * @words: number of words + * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit word(s) from EEPROM + * @words: number of words * - * Reads 16 bit word(s) from EEPROM + * Reads 16 bit word(s) from EEPROM **/ s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -859,11 +859,11 @@ s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum + * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum * - * Performs checksum calculation and validates the EEPROM checksum + * Performs checksum calculation and validates the EEPROM checksum **/ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val) { @@ -872,8 +872,8 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val) } /** - * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum - * @hw: pointer to hardware structure + * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum + * @hw: pointer to hardware structure **/ s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw) { @@ -882,13 +882,13 @@ s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw) } /** - * ixgbe_insert_mac_addr - Find a RAR for this mac address - * @hw: pointer to hardware structure - * @addr: Address to put into receive address register - * @vmdq: VMDq pool to assign + * ixgbe_insert_mac_addr - Find a RAR for this mac address + * @hw: pointer to hardware structure + * @addr: Address to put into receive address register + * @vmdq: VMDq pool to assign * - * Puts an ethernet address into a receive address register, or - * finds the rar that it is aleady in; adds to the pool list + * Puts an ethernet address into a receive address register, or + * finds the rar that it is already in; adds to the pool list **/ s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) { @@ -898,14 +898,14 @@ s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) } /** - * ixgbe_set_rar - Set Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * @addr: Address to put into receive address register - * @vmdq: VMDq "set" - * @enable_addr: set flag that address is active + * ixgbe_set_rar - Set Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @vmdq: VMDq "set" + * @enable_addr: set flag that address is active * - * Puts an ethernet address into a receive address register. + * Puts an ethernet address into a receive address register. **/ s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, u32 enable_addr) @@ -915,11 +915,11 @@ s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, } /** - * ixgbe_clear_rar - Clear Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write + * ixgbe_clear_rar - Clear Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write * - * Puts an ethernet address into a receive address register. + * Puts an ethernet address into a receive address register. **/ s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index) { @@ -928,10 +928,10 @@ s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_set_vmdq - Associate a VMDq index with a receive address - * @hw: pointer to hardware structure - * @rar: receive address register index to associate with VMDq index - * @vmdq: VMDq set or pool index + * ixgbe_set_vmdq - Associate a VMDq index with a receive address + * @hw: pointer to hardware structure + * @rar: receive address register index to associate with VMDq index + * @vmdq: VMDq set or pool index **/ s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -941,9 +941,9 @@ s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address - * @hw: pointer to hardware structure - * @vmdq: VMDq default pool index + * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address + * @hw: pointer to hardware structure + * @vmdq: VMDq default pool index **/ s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq) { @@ -952,10 +952,10 @@ s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq) } /** - * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address - * @hw: pointer to hardware structure - * @rar: receive address register index to disassociate with VMDq index - * @vmdq: VMDq set or pool index + * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address + * @hw: pointer to hardware structure + * @rar: receive address register index to disassociate with VMDq index + * @vmdq: VMDq set or pool index **/ s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -964,12 +964,12 @@ s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * ixgbe_init_rx_addrs - Initializes receive address filters. - * @hw: pointer to hardware structure + * ixgbe_init_rx_addrs - Initializes receive address filters. + * @hw: pointer to hardware structure * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive address registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. **/ s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) { @@ -978,8 +978,8 @@ s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) } /** - * ixgbe_get_num_rx_addrs - Returns the number of RAR entries. - * @hw: pointer to hardware structure + * ixgbe_get_num_rx_addrs - Returns the number of RAR entries. + * @hw: pointer to hardware structure **/ u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw) { @@ -987,15 +987,15 @@ u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw) } /** - * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses - * @hw: pointer to hardware structure - * @addr_list: the list of new multicast addresses - * @addr_count: number of addresses - * @func: iterator function to walk the multicast address list + * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses + * @hw: pointer to hardware structure + * @addr_list: the list of new multicast addresses + * @addr_count: number of addresses + * @func: iterator function to walk the multicast address list * - * The given list replaces any existing list. Clears the secondary addrs from - * receive address registers. Uses unused receive address registers for the - * first secondary addresses, and falls back to promiscuous mode as needed. + * The given list replaces any existing list. Clears the secondary addrs from + * receive address registers. Uses unused receive address registers for the + * first secondary addresses, and falls back to promiscuous mode as needed. **/ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, u32 addr_count, ixgbe_mc_addr_itr func) @@ -1006,17 +1006,17 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, } /** - * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses - * @hw: pointer to hardware structure - * @mc_addr_list: the list of new multicast addresses - * @mc_addr_count: number of addresses - * @func: iterator function to walk the multicast address list - * @clear: flag, when set clears the table beforehand + * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses + * @hw: pointer to hardware structure + * @mc_addr_list: the list of new multicast addresses + * @mc_addr_count: number of addresses + * @func: iterator function to walk the multicast address list + * @clear: flag, when set clears the table beforehand * - * The given list replaces any existing list. Clears the MC addrs from receive - * address registers and the multicast table. Uses unused receive address - * registers for the first multicast addresses, and hashes the rest into the - * multicast table. + * The given list replaces any existing list. Clears the MC addrs from receive + * address registers and the multicast table. Uses unused receive address + * registers for the first multicast addresses, and hashes the rest into the + * multicast table. **/ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, u32 mc_addr_count, ixgbe_mc_addr_itr func, @@ -1028,10 +1028,10 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, } /** - * ixgbe_enable_mc - Enable multicast address in RAR - * @hw: pointer to hardware structure + * ixgbe_enable_mc - Enable multicast address in RAR + * @hw: pointer to hardware structure * - * Enables multicast address in RAR and the use of the multicast hash table. + * Enables multicast address in RAR and the use of the multicast hash table. **/ s32 ixgbe_enable_mc(struct ixgbe_hw *hw) { @@ -1040,10 +1040,10 @@ s32 ixgbe_enable_mc(struct ixgbe_hw *hw) } /** - * ixgbe_disable_mc - Disable multicast address in RAR - * @hw: pointer to hardware structure + * ixgbe_disable_mc - Disable multicast address in RAR + * @hw: pointer to hardware structure * - * Disables multicast address in RAR and the use of the multicast hash table. + * Disables multicast address in RAR and the use of the multicast hash table. **/ s32 ixgbe_disable_mc(struct ixgbe_hw *hw) { @@ -1052,10 +1052,10 @@ s32 ixgbe_disable_mc(struct ixgbe_hw *hw) } /** - * ixgbe_clear_vfta - Clear VLAN filter table - * @hw: pointer to hardware structure + * ixgbe_clear_vfta - Clear VLAN filter table + * @hw: pointer to hardware structure * - * Clears the VLAN filer table, and the VMDq index associated with the filter + * Clears the VLAN filer table, and the VMDq index associated with the filter **/ s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) { @@ -1064,14 +1064,14 @@ s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) } /** - * ixgbe_set_vfta - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VLVFB - * @vlan_on: boolean flag to turn on/off VLAN - * @vlvf_bypass: boolean flag indicating updating the default pool is okay + * ixgbe_set_vfta - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VLVFB + * @vlan_on: boolean flag to turn on/off VLAN + * @vlvf_bypass: boolean flag indicating updating the default pool is okay * - * Turn on/off specified VLAN in the VLAN filter table. + * Turn on/off specified VLAN in the VLAN filter table. **/ s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, bool vlvf_bypass) @@ -1081,17 +1081,17 @@ s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, } /** - * ixgbe_set_vlvf - Set VLAN Pool Filter - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VLVFB - * @vlan_on: boolean flag to turn on/off VLAN in VLVF - * @vfta_delta: pointer to the difference between the current value of VFTA + * ixgbe_set_vlvf - Set VLAN Pool Filter + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VLVFB + * @vlan_on: boolean flag to turn on/off VLAN in VLVF + * @vfta_delta: pointer to the difference between the current value of VFTA * and the desired value - * @vfta: the desired value of the VFTA - * @vlvf_bypass: boolean flag indicating updating the default pool is okay + * @vfta: the desired value of the VFTA + * @vlvf_bypass: boolean flag indicating updating the default pool is okay * - * Turn on/off specified bit in VLVF table. + * Turn on/off specified bit in VLVF table. **/ s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, u32 *vfta_delta, u32 vfta, bool vlvf_bypass) @@ -1102,10 +1102,10 @@ s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, } /** - * ixgbe_fc_enable - Enable flow control - * @hw: pointer to hardware structure + * ixgbe_fc_enable - Enable flow control + * @hw: pointer to hardware structure * - * Configures the flow control settings based on SW configuration. + * Configures the flow control settings based on SW configuration. **/ s32 ixgbe_fc_enable(struct ixgbe_hw *hw) { @@ -1114,10 +1114,10 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw) } /** - * ixgbe_setup_fc - Set up flow control - * @hw: pointer to hardware structure + * ixgbe_setup_fc - Set up flow control + * @hw: pointer to hardware structure * - * Called at init time to set up flow control. + * Called at init time to set up flow control. **/ s32 ixgbe_setup_fc(struct ixgbe_hw *hw) { @@ -1145,10 +1145,10 @@ s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, /** - * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data - * @hw: pointer to hardware structure + * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data + * @hw: pointer to hardware structure * - * Updates the temperatures in mac.thermal_sensor_data + * Updates the temperatures in mac.thermal_sensor_data **/ s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw) { @@ -1157,10 +1157,10 @@ s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw) } /** - * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds - * @hw: pointer to hardware structure + * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds + * @hw: pointer to hardware structure * - * Inits the thermal sensor thresholds according to the NVM map + * Inits the thermal sensor thresholds according to the NVM map **/ s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw) { @@ -1169,11 +1169,11 @@ s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw) } /** - * ixgbe_dmac_config - Configure DMA Coalescing registers. - * @hw: pointer to hardware structure + * ixgbe_dmac_config - Configure DMA Coalescing registers. + * @hw: pointer to hardware structure * - * Configure DMA coalescing. If enabling dmac, dmac is activated. - * When disabling dmac, dmac enable dmac bit is cleared. + * Configure DMA coalescing. If enabling dmac, dmac is activated. + * When disabling dmac, dmac enable dmac bit is cleared. **/ s32 ixgbe_dmac_config(struct ixgbe_hw *hw) { @@ -1182,10 +1182,10 @@ s32 ixgbe_dmac_config(struct ixgbe_hw *hw) } /** - * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers. - * @hw: pointer to hardware structure + * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers. + * @hw: pointer to hardware structure * - * Disables dmac, updates per TC settings, and then enable dmac. + * Disables dmac, updates per TC settings, and then enable dmac. **/ s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw) { @@ -1194,11 +1194,11 @@ s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw) } /** - * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers. - * @hw: pointer to hardware structure + * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers. + * @hw: pointer to hardware structure * - * Configure DMA coalescing threshold per TC and set high priority bit for - * FCOE TC. The dmac enable bit must be cleared before configuring. + * Configure DMA coalescing threshold per TC and set high priority bit for + * FCOE TC. The dmac enable bit must be cleared before configuring. **/ s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw) { @@ -1207,13 +1207,13 @@ s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw) } /** - * ixgbe_setup_eee - Enable/disable EEE support - * @hw: pointer to the HW structure - * @enable_eee: boolean flag to enable EEE + * ixgbe_setup_eee - Enable/disable EEE support + * @hw: pointer to the HW structure + * @enable_eee: boolean flag to enable EEE * - * Enable/disable EEE based on enable_ee flag. - * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C - * are modified. + * Enable/disable EEE based on enable_ee flag. + * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C + * are modified. * **/ s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee) @@ -1236,10 +1236,10 @@ void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable, } /** - * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for Ethertype anti-spoofing - * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing + * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for Ethertype anti-spoofing + * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing * **/ void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) @@ -1249,13 +1249,13 @@ void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) } /** - * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @device_type: type of device you want to communicate with - * @phy_data: Pointer to read data from PHY register + * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: type of device you want to communicate with + * @phy_data: Pointer to read data from PHY register * - * Reads a value from a specified PHY register + * Reads a value from a specified PHY register **/ s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 *phy_data) @@ -1265,13 +1265,13 @@ s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: type of device you want to communicate with - * @phy_data: Data to write to the PHY register + * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: type of device you want to communicate with + * @phy_data: Data to write to the PHY register * - * Writes a value to specified PHY register + * Writes a value to specified PHY register **/ s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 phy_data) @@ -1281,8 +1281,8 @@ s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_disable_mdd - Disable malicious driver detection - * @hw: pointer to hardware structure + * ixgbe_disable_mdd - Disable malicious driver detection + * @hw: pointer to hardware structure * **/ void ixgbe_disable_mdd(struct ixgbe_hw *hw) @@ -1292,8 +1292,8 @@ void ixgbe_disable_mdd(struct ixgbe_hw *hw) } /** - * ixgbe_enable_mdd - Enable malicious driver detection - * @hw: pointer to hardware structure + * ixgbe_enable_mdd - Enable malicious driver detection + * @hw: pointer to hardware structure * **/ void ixgbe_enable_mdd(struct ixgbe_hw *hw) @@ -1303,9 +1303,9 @@ void ixgbe_enable_mdd(struct ixgbe_hw *hw) } /** - * ixgbe_mdd_event - Handle malicious driver detection event - * @hw: pointer to hardware structure - * @vf_bitmap: vf bitmap of malicious vfs + * ixgbe_mdd_event - Handle malicious driver detection event + * @hw: pointer to hardware structure + * @vf_bitmap: vf bitmap of malicious vfs * **/ void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap) @@ -1315,10 +1315,10 @@ void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap) } /** - * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver - * detection event - * @hw: pointer to hardware structure - * @vf: vf index + * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver + * detection event + * @hw: pointer to hardware structure + * @vf: vf index * **/ void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf) @@ -1328,8 +1328,8 @@ void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf) } /** - * ixgbe_fw_recovery_mode - Check if in FW NVM recovery mode - * @hw: pointer to hardware structure + * ixgbe_fw_recovery_mode - Check if in FW NVM recovery mode + * @hw: pointer to hardware structure * **/ bool ixgbe_fw_recovery_mode(struct ixgbe_hw *hw) @@ -1340,8 +1340,8 @@ bool ixgbe_fw_recovery_mode(struct ixgbe_hw *hw) } /** - * ixgbe_enter_lplu - Transition to low power states - * @hw: pointer to hardware structure + * ixgbe_enter_lplu - Transition to low power states + * @hw: pointer to hardware structure * * Configures Low Power Link Up on transition to low power states * (from D0 to non-D0). @@ -1370,12 +1370,12 @@ s32 ixgbe_handle_lasi(struct ixgbe_hw *hw) } /** - * ixgbe_read_analog_reg8 - Reads 8 bit analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value + * ixgbe_read_analog_reg8 - Reads 8 bit analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value * - * Performs write operation to analog register specified. + * Performs write operation to analog register specified. **/ s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) { @@ -1384,12 +1384,12 @@ s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) } /** - * ixgbe_write_analog_reg8 - Writes 8 bit analog register - * @hw: pointer to hardware structure - * @reg: analog register to write - * @val: value to write + * ixgbe_write_analog_reg8 - Writes 8 bit analog register + * @hw: pointer to hardware structure + * @reg: analog register to write + * @val: value to write * - * Performs write operation to Atlas analog register specified. + * Performs write operation to Atlas analog register specified. **/ s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val) { @@ -1398,11 +1398,11 @@ s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_init_uta_tables - Initializes Unicast Table Arrays. - * @hw: pointer to hardware structure + * ixgbe_init_uta_tables - Initializes Unicast Table Arrays. + * @hw: pointer to hardware structure * - * Initializes the Unicast Table Arrays to zero on device load. This - * is part of the Rx init addr execution path. + * Initializes the Unicast Table Arrays to zero on device load. This + * is part of the Rx init addr execution path. **/ s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw) { @@ -1411,13 +1411,13 @@ s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw) } /** - * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: I2C bus address to read from - * @data: value read + * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: I2C bus address to read from + * @data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface. + * Performs byte read operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) @@ -1427,13 +1427,13 @@ s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, } /** - * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: I2C bus address to read from - * @data: value read + * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: I2C bus address to read from + * @data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface. + * Performs byte read operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) @@ -1474,14 +1474,14 @@ s32 ixgbe_read_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val) } /** - * ixgbe_write_i2c_byte - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: I2C bus address to write to - * @data: value to write + * ixgbe_write_i2c_byte - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: I2C bus address to write to + * @data: value to write * - * Performs byte write operation to SFP module's EEPROM over I2C interface - * at a specified device address. + * Performs byte write operation to SFP module's EEPROM over I2C interface + * at a specified device address. **/ s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) @@ -1491,14 +1491,14 @@ s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, } /** - * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: I2C bus address to write to - * @data: value to write + * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: I2C bus address to write to + * @data: value to write * - * Performs byte write operation to SFP module's EEPROM over I2C interface - * at a specified device address. + * Performs byte write operation to SFP module's EEPROM over I2C interface + * at a specified device address. **/ s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) @@ -1539,12 +1539,12 @@ s32 ixgbe_write_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val) } /** - * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to write - * @eeprom_data: value to write + * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to write + * @eeprom_data: value to write * - * Performs byte write operation to SFP module's EEPROM over I2C interface. + * Performs byte write operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data) @@ -1555,12 +1555,12 @@ s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, } /** - * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read + * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface. + * Performs byte read operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) { @@ -1570,10 +1570,10 @@ s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) } /** - * ixgbe_get_supported_physical_layer - Returns physical layer type - * @hw: pointer to hardware structure + * ixgbe_get_supported_physical_layer - Returns physical layer type + * @hw: pointer to hardware structure * - * Determines physical layer capabilities of the current configuration. + * Determines physical layer capabilities of the current configuration. **/ u64 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw) { @@ -1582,11 +1582,11 @@ u64 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw) } /** - * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics - * @hw: pointer to hardware structure - * @regval: bitfield to write to the Rx DMA register + * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics + * @hw: pointer to hardware structure + * @regval: bitfield to write to the Rx DMA register * - * Enables the Rx DMA unit of the device. + * Enables the Rx DMA unit of the device. **/ s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval) { @@ -1595,10 +1595,10 @@ s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval) } /** - * ixgbe_disable_sec_rx_path - Stops the receive data path - * @hw: pointer to hardware structure + * ixgbe_disable_sec_rx_path - Stops the receive data path + * @hw: pointer to hardware structure * - * Stops the receive data path. + * Stops the receive data path. **/ s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw) { @@ -1607,10 +1607,10 @@ s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw) } /** - * ixgbe_enable_sec_rx_path - Enables the receive data path - * @hw: pointer to hardware structure + * ixgbe_enable_sec_rx_path - Enables the receive data path + * @hw: pointer to hardware structure * - * Enables the receive data path. + * Enables the receive data path. **/ s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw) { @@ -1619,12 +1619,12 @@ s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw) } /** - * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire + * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire * - * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) + * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) **/ s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) { @@ -1633,12 +1633,12 @@ s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_release_swfw_semaphore - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release + * ixgbe_release_swfw_semaphore - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release * - * Releases the SWFW semaphore through SW_FW_SYNC register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) + * Releases the SWFW semaphore through SW_FW_SYNC register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) **/ void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) { @@ -1647,13 +1647,13 @@ void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_init_swfw_semaphore - Clean up SWFW semaphore - * @hw: pointer to hardware structure + * ixgbe_init_swfw_semaphore - Clean up SWFW semaphore + * @hw: pointer to hardware structure * - * Attempts to acquire the SWFW semaphore through SW_FW_SYNC register. - * Regardless of whether is succeeds or not it then release the semaphore. - * This is function is called to recover from catastrophic failures that - * may have left the semaphore locked. + * Attempts to acquire the SWFW semaphore through SW_FW_SYNC register. + * Regardless of whether is succeeds or not it then release the semaphore. + * This is function is called to recover from catastrophic failures that + * may have left the semaphore locked. **/ void ixgbe_init_swfw_semaphore(struct ixgbe_hw *hw) { @@ -1675,11 +1675,11 @@ void ixgbe_enable_rx(struct ixgbe_hw *hw) } /** - * ixgbe_set_rate_select_speed - Set module link speed - * @hw: pointer to hardware structure - * @speed: link speed to set + * ixgbe_set_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set * - * Set module link speed via the rate select. + * Set module link speed via the rate select. */ void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) { diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c index 2d848a02b3..d98d5a9ca8 100644 --- a/drivers/net/ixgbe/base/ixgbe_common.c +++ b/drivers/net/ixgbe/base/ixgbe_common.c @@ -31,10 +31,10 @@ STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, u16 offset); /** - * ixgbe_init_ops_generic - Inits function ptrs - * @hw: pointer to the hardware structure + * ixgbe_init_ops_generic - Inits function ptrs + * @hw: pointer to the hardware structure * - * Initialize the function pointers. + * Initialize the function pointers. **/ s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw) { @@ -194,10 +194,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) } /** - * ixgbe_setup_fc_generic - Set up flow control - * @hw: pointer to hardware structure + * ixgbe_setup_fc_generic - Set up flow control + * @hw: pointer to hardware structure * - * Called at init time to set up flow control. + * Called at init time to set up flow control. **/ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw) { @@ -349,13 +349,13 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw) } /** - * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure + * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure * - * Starts the hardware by filling the bus info structure and media type, clears - * all on chip counters, initializes receive address registers, multicast - * table, VLAN filter table, calls routine to set up link and flow control - * settings, and leaves transmit and receive units disabled and uninitialized + * Starts the hardware by filling the bus info structure and media type, clears + * all on chip counters, initializes receive address registers, multicast + * table, VLAN filter table, calls routine to set up link and flow control + * settings, and leaves transmit and receive units disabled and uninitialized **/ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) { @@ -412,14 +412,14 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) } /** - * ixgbe_start_hw_gen2 - Init sequence for common device family - * @hw: pointer to hw structure + * ixgbe_start_hw_gen2 - Init sequence for common device family + * @hw: pointer to hw structure * * Performs the init sequence common to the second generation * of 10 GbE devices. * Devices in the second generation: - * 82599 - * X540 + * 82599 + * X540 **/ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) { @@ -451,14 +451,14 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) } /** - * ixgbe_init_hw_generic - Generic hardware initialization - * @hw: pointer to hardware structure + * ixgbe_init_hw_generic - Generic hardware initialization + * @hw: pointer to hardware structure * - * Initialize the hardware by resetting the hardware, filling the bus info - * structure and media type, clears all on chip counters, initializes receive - * address registers, multicast table, VLAN filter table, calls routine to set - * up link and flow control settings, and leaves transmit and receive units - * disabled and uninitialized + * Initialize the hardware by resetting the hardware, filling the bus info + * structure and media type, clears all on chip counters, initializes receive + * address registers, multicast table, VLAN filter table, calls routine to set + * up link and flow control settings, and leaves transmit and receive units + * disabled and uninitialized **/ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) { @@ -485,11 +485,11 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) } /** - * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters - * @hw: pointer to hardware structure + * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters + * @hw: pointer to hardware structure * - * Clears all hardware statistics counters by reading them from the hardware - * Statistics counters are clear on read. + * Clears all hardware statistics counters by reading them from the hardware + * Statistics counters are clear on read. **/ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) { @@ -599,12 +599,12 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) } /** - * ixgbe_read_pba_string_generic - Reads part number string from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number string from the EEPROM - * @pba_num_size: part number string buffer length + * ixgbe_read_pba_string_generic - Reads part number string from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number string from the EEPROM + * @pba_num_size: part number string buffer length * - * Reads the part number string from the EEPROM. + * Reads the part number string from the EEPROM. **/ s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) @@ -710,11 +710,11 @@ s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, } /** - * ixgbe_read_pba_num_generic - Reads part number from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number from the EEPROM + * ixgbe_read_pba_num_generic - Reads part number from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number from the EEPROM * - * Reads the part number from the EEPROM. + * Reads the part number from the EEPROM. **/ s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num) { @@ -744,15 +744,15 @@ s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num) } /** - * ixgbe_read_pba_raw - * @hw: pointer to the HW structure - * @eeprom_buf: optional pointer to EEPROM image - * @eeprom_buf_size: size of EEPROM image in words - * @max_pba_block_size: PBA block size limit - * @pba: pointer to output PBA structure + * ixgbe_read_pba_raw + * @hw: pointer to the HW structure + * @eeprom_buf: optional pointer to EEPROM image + * @eeprom_buf_size: size of EEPROM image in words + * @max_pba_block_size: PBA block size limit + * @pba: pointer to output PBA structure * - * Reads PBA from EEPROM image when eeprom_buf is not NULL. - * Reads PBA from physical EEPROM device when eeprom_buf is NULL. + * Reads PBA from EEPROM image when eeprom_buf is not NULL. + * Reads PBA from physical EEPROM device when eeprom_buf is NULL. * **/ s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf, @@ -814,14 +814,14 @@ s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf, } /** - * ixgbe_write_pba_raw - * @hw: pointer to the HW structure - * @eeprom_buf: optional pointer to EEPROM image - * @eeprom_buf_size: size of EEPROM image in words - * @pba: pointer to PBA structure + * ixgbe_write_pba_raw + * @hw: pointer to the HW structure + * @eeprom_buf: optional pointer to EEPROM image + * @eeprom_buf_size: size of EEPROM image in words + * @pba: pointer to PBA structure * - * Writes PBA to EEPROM image when eeprom_buf is not NULL. - * Writes PBA to physical EEPROM device when eeprom_buf is NULL. + * Writes PBA to EEPROM image when eeprom_buf is not NULL. + * Writes PBA to physical EEPROM device when eeprom_buf is NULL. * **/ s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf, @@ -872,15 +872,15 @@ s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf, } /** - * ixgbe_get_pba_block_size - * @hw: pointer to the HW structure - * @eeprom_buf: optional pointer to EEPROM image - * @eeprom_buf_size: size of EEPROM image in words - * @pba_data_size: pointer to output variable + * ixgbe_get_pba_block_size + * @hw: pointer to the HW structure + * @eeprom_buf: optional pointer to EEPROM image + * @eeprom_buf_size: size of EEPROM image in words + * @pba_data_size: pointer to output variable * - * Returns the size of the PBA block in words. Function operates on EEPROM - * image if the eeprom_buf pointer is not NULL otherwise it accesses physical - * EEPROM device. + * Returns the size of the PBA block in words. Function operates on EEPROM + * image if the eeprom_buf pointer is not NULL otherwise it accesses physical + * EEPROM device. * **/ s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf, @@ -933,13 +933,13 @@ s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf, } /** - * ixgbe_get_mac_addr_generic - Generic get MAC address - * @hw: pointer to hardware structure - * @mac_addr: Adapter MAC address + * ixgbe_get_mac_addr_generic - Generic get MAC address + * @hw: pointer to hardware structure + * @mac_addr: Adapter MAC address * - * Reads the adapter's MAC address from first Receive Address Register (RAR0) - * A reset of the adapter must be performed prior to calling this function - * in order for the MAC address to have been loaded from the EEPROM into RAR0 + * Reads the adapter's MAC address from first Receive Address Register (RAR0) + * A reset of the adapter must be performed prior to calling this function + * in order for the MAC address to have been loaded from the EEPROM into RAR0 **/ s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) { @@ -962,11 +962,11 @@ s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) } /** - * ixgbe_set_pci_config_data_generic - Generic store PCI bus info - * @hw: pointer to hardware structure - * @link_status: the link status returned by the PCI config space + * ixgbe_set_pci_config_data_generic - Generic store PCI bus info + * @hw: pointer to hardware structure + * @link_status: the link status returned by the PCI config space * - * Stores the PCI bus info (speed, width, type) within the ixgbe_hw structure + * Stores the PCI bus info (speed, width, type) within the ixgbe_hw structure **/ void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status) { @@ -1012,11 +1012,11 @@ void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status) } /** - * ixgbe_get_bus_info_generic - Generic set PCI bus info - * @hw: pointer to hardware structure + * ixgbe_get_bus_info_generic - Generic set PCI bus info + * @hw: pointer to hardware structure * - * Gets the PCI bus info (speed, width, type) then calls helper function to - * store this data within the ixgbe_hw structure. + * Gets the PCI bus info (speed, width, type) then calls helper function to + * store this data within the ixgbe_hw structure. **/ s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) { @@ -1033,12 +1033,12 @@ s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) } /** - * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices - * @hw: pointer to the HW structure + * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * @hw: pointer to the HW structure * - * Determines the LAN function id by reading memory-mapped registers and swaps - * the port value if requested, and set MAC instance for devices that share - * CS4227. + * Determines the LAN function id by reading memory-mapped registers and swaps + * the port value if requested, and set MAC instance for devices that share + * CS4227. **/ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) { @@ -1066,13 +1066,13 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) } /** - * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units - * @hw: pointer to hardware structure + * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units + * @hw: pointer to hardware structure * - * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, - * disables transmit and receive units. The adapter_stopped flag is used by - * the shared code and drivers to determine if the adapter is in a stopped - * state and should not touch the hardware. + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. **/ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) { @@ -1120,11 +1120,11 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) } /** - * ixgbe_init_led_link_act_generic - Store the LED index link/activity. - * @hw: pointer to hardware structure + * ixgbe_init_led_link_act_generic - Store the LED index link/activity. + * @hw: pointer to hardware structure * - * Store the index for the link active LED. This will be used to support - * blinking the LED. + * Store the index for the link active LED. This will be used to support + * blinking the LED. **/ s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw) { @@ -1161,9 +1161,9 @@ s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw) } /** - * ixgbe_led_on_generic - Turns on the software controllable LEDs. - * @hw: pointer to hardware structure - * @index: led number to turn on + * ixgbe_led_on_generic - Turns on the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn on **/ s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) { @@ -1184,9 +1184,9 @@ s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_led_off_generic - Turns off the software controllable LEDs. - * @hw: pointer to hardware structure - * @index: led number to turn off + * ixgbe_led_off_generic - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn off **/ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) { @@ -1207,11 +1207,11 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_init_eeprom_params_generic - Initialize EEPROM params - * @hw: pointer to hardware structure + * ixgbe_init_eeprom_params_generic - Initialize EEPROM params + * @hw: pointer to hardware structure * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. **/ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) { @@ -1260,13 +1260,13 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) } /** - * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to write - * @words: number of word(s) - * @data: 16 bit word(s) to write to EEPROM + * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to write + * @words: number of word(s) + * @data: 16 bit word(s) to write to EEPROM * - * Reads 16 bit word(s) from EEPROM through bit-bang method + * Reads 16 bit word(s) from EEPROM through bit-bang method **/ s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -1316,14 +1316,14 @@ s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @words: number of word(s) - * @data: 16 bit word(s) to be written to the EEPROM + * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @words: number of word(s) + * @data: 16 bit word(s) to be written to the EEPROM * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. **/ STATIC s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -1399,13 +1399,13 @@ STATIC s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM + * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. **/ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) { @@ -1427,13 +1427,13 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) } /** - * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit words(s) from EEPROM - * @words: number of word(s) + * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit words(s) from EEPROM + * @words: number of word(s) * - * Reads 16 bit word(s) from EEPROM through bit-bang method + * Reads 16 bit word(s) from EEPROM through bit-bang method **/ s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -1476,13 +1476,13 @@ s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @words: number of word(s) - * @data: read 16 bit word(s) from EEPROM + * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit word(s) from EEPROM * - * Reads 16 bit word(s) from EEPROM through bit-bang method + * Reads 16 bit word(s) from EEPROM through bit-bang method **/ STATIC s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -1534,12 +1534,12 @@ STATIC s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM + * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM * - * Reads 16 bit value from EEPROM through bit-bang method + * Reads 16 bit value from EEPROM through bit-bang method **/ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) @@ -1562,13 +1562,13 @@ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @words: number of word(s) - * @data: 16 bit word(s) from the EEPROM + * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of word(s) + * @data: 16 bit word(s) from the EEPROM * - * Reads a 16 bit word(s) from the EEPROM using the EERD register. + * Reads a 16 bit word(s) from the EEPROM using the EERD register. **/ s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -1613,13 +1613,13 @@ s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be used as a scratch pad + * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be used as a scratch pad * - * Discover EEPROM page size by writing marching data at given offset. - * This function is called only when we are writing a new large buffer - * at given offset so the data would be overwritten anyway. + * Discover EEPROM page size by writing marching data at given offset. + * This function is called only when we are writing a new large buffer + * at given offset so the data would be overwritten anyway. **/ STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, u16 offset) @@ -1657,12 +1657,12 @@ STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, } /** - * ixgbe_read_eerd_generic - Read EEPROM word using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM + * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM * - * Reads a 16 bit word from the EEPROM using the EERD register. + * Reads a 16 bit word from the EEPROM using the EERD register. **/ s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) { @@ -1670,13 +1670,13 @@ s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) } /** - * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @words: number of word(s) - * @data: word(s) write to the EEPROM + * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of word(s) + * @data: word(s) write to the EEPROM * - * Write a 16 bit word(s) to the EEPROM using the EEWR register. + * Write a 16 bit word(s) to the EEPROM using the EEWR register. **/ s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -1726,12 +1726,12 @@ s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_write_eewr_generic - Write EEPROM word using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM + * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM * - * Write a 16 bit word to the EEPROM using the EEWR register. + * Write a 16 bit word to the EEPROM using the EEWR register. **/ s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) { @@ -1739,12 +1739,12 @@ s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) } /** - * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status - * @hw: pointer to hardware structure - * @ee_reg: EEPROM flag for polling + * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status + * @hw: pointer to hardware structure + * @ee_reg: EEPROM flag for polling * - * Polls the status bit (bit 1) of the EERD or EEWR to determine when the - * read or write is done respectively. + * Polls the status bit (bit 1) of the EERD or EEWR to determine when the + * read or write is done respectively. **/ s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) { @@ -1775,11 +1775,11 @@ s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) } /** - * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang - * @hw: pointer to hardware structure + * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang + * @hw: pointer to hardware structure * - * Prepares EEPROM for access using bit-bang method. This function should - * be called before issuing a command to the EEPROM. + * Prepares EEPROM for access using bit-bang method. This function should + * be called before issuing a command to the EEPROM. **/ STATIC s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) { @@ -1830,10 +1830,10 @@ STATIC s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) } /** - * ixgbe_get_eeprom_semaphore - Get hardware semaphore - * @hw: pointer to hardware structure + * ixgbe_get_eeprom_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure * - * Sets the hardware semaphores so EEPROM access can occur for bit-bang method + * Sets the hardware semaphores so EEPROM access can occur for bit-bang method **/ STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) { @@ -1921,10 +1921,10 @@ STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) } /** - * ixgbe_release_eeprom_semaphore - Release hardware semaphore - * @hw: pointer to hardware structure + * ixgbe_release_eeprom_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure * - * This function clears hardware semaphore bits. + * This function clears hardware semaphore bits. **/ STATIC void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) { @@ -1941,8 +1941,8 @@ STATIC void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) } /** - * ixgbe_ready_eeprom - Polls for EEPROM ready - * @hw: pointer to hardware structure + * ixgbe_ready_eeprom - Polls for EEPROM ready + * @hw: pointer to hardware structure **/ STATIC s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) { @@ -1982,8 +1982,8 @@ STATIC s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) } /** - * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state - * @hw: pointer to hardware structure + * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state + * @hw: pointer to hardware structure **/ STATIC void ixgbe_standby_eeprom(struct ixgbe_hw *hw) { @@ -2005,10 +2005,10 @@ STATIC void ixgbe_standby_eeprom(struct ixgbe_hw *hw) } /** - * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. - * @hw: pointer to hardware structure - * @data: data to send to the EEPROM - * @count: number of bits to shift out + * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. + * @hw: pointer to hardware structure + * @data: data to send to the EEPROM + * @count: number of bits to shift out **/ STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, u16 count) @@ -2062,9 +2062,9 @@ STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, } /** - * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM - * @hw: pointer to hardware structure - * @count: number of bits to shift + * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM + * @hw: pointer to hardware structure + * @count: number of bits to shift **/ STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) { @@ -2102,9 +2102,9 @@ STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) } /** - * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. - * @hw: pointer to hardware structure - * @eec: EEC register's current value + * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. + * @hw: pointer to hardware structure + * @eec: EEC register's current value **/ STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) { @@ -2121,9 +2121,9 @@ STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) } /** - * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. - * @hw: pointer to hardware structure - * @eec: EEC's current value + * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. + * @hw: pointer to hardware structure + * @eec: EEC's current value **/ STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) { @@ -2140,8 +2140,8 @@ STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) } /** - * ixgbe_release_eeprom - Release EEPROM, release semaphores - * @hw: pointer to hardware structure + * ixgbe_release_eeprom - Release EEPROM, release semaphores + * @hw: pointer to hardware structure **/ STATIC void ixgbe_release_eeprom(struct ixgbe_hw *hw) { @@ -2170,10 +2170,10 @@ STATIC void ixgbe_release_eeprom(struct ixgbe_hw *hw) } /** - * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum - * @hw: pointer to hardware structure + * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum + * @hw: pointer to hardware structure * - * Returns a negative error code on error, or the 16-bit checksum + * Returns a negative error code on error, or the 16-bit checksum **/ s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) { @@ -2229,12 +2229,12 @@ s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) } /** - * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum + * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum * - * Performs checksum calculation and validates the EEPROM checksum. If the - * caller does not need checksum_val, the value can be NULL. + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. **/ s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, u16 *checksum_val) @@ -2281,8 +2281,8 @@ s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, } /** - * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum - * @hw: pointer to hardware structure + * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum + * @hw: pointer to hardware structure **/ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) { @@ -2313,10 +2313,10 @@ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) } /** - * ixgbe_validate_mac_addr - Validate MAC address - * @mac_addr: pointer to MAC address. + * ixgbe_validate_mac_addr - Validate MAC address + * @mac_addr: pointer to MAC address. * - * Tests a MAC address to ensure it is a valid Individual Address. + * Tests a MAC address to ensure it is a valid Individual Address. **/ s32 ixgbe_validate_mac_addr(u8 *mac_addr) { @@ -2339,14 +2339,14 @@ s32 ixgbe_validate_mac_addr(u8 *mac_addr) } /** - * ixgbe_set_rar_generic - Set Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * @addr: Address to put into receive address register - * @vmdq: VMDq "set" or "pool" index - * @enable_addr: set flag that address is active + * ixgbe_set_rar_generic - Set Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @vmdq: VMDq "set" or "pool" index + * @enable_addr: set flag that address is active * - * Puts an ethernet address into a receive address register. + * Puts an ethernet address into a receive address register. **/ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, u32 enable_addr) @@ -2393,11 +2393,11 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, } /** - * ixgbe_clear_rar_generic - Remove Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write + * ixgbe_clear_rar_generic - Remove Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write * - * Clears an ethernet address from a receive address register. + * Clears an ethernet address from a receive address register. **/ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) { @@ -2431,12 +2431,12 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_init_rx_addrs_generic - Initializes receive address filters. - * @hw: pointer to hardware structure + * ixgbe_init_rx_addrs_generic - Initializes receive address filters. + * @hw: pointer to hardware structure * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive address registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. **/ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) { @@ -2500,12 +2500,12 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) } /** - * ixgbe_add_uc_addr - Adds a secondary unicast address. - * @hw: pointer to hardware structure - * @addr: new address - * @vmdq: VMDq "set" or "pool" index + * ixgbe_add_uc_addr - Adds a secondary unicast address. + * @hw: pointer to hardware structure + * @addr: new address + * @vmdq: VMDq "set" or "pool" index * - * Adds it to unused receive address register or goes into promiscuous mode. + * Adds it to unused receive address register or goes into promiscuous mode. **/ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) { @@ -2534,18 +2534,18 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) } /** - * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses - * @hw: pointer to hardware structure - * @addr_list: the list of new addresses - * @addr_count: number of addresses - * @next: iterator function to walk the address list + * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses + * @hw: pointer to hardware structure + * @addr_list: the list of new addresses + * @addr_count: number of addresses + * @next: iterator function to walk the address list * - * The given list replaces any existing list. Clears the secondary addrs from - * receive address registers. Uses unused receive address registers for the - * first secondary addresses, and falls back to promiscuous mode as needed. + * The given list replaces any existing list. Clears the secondary addrs from + * receive address registers. Uses unused receive address registers for the + * first secondary addresses, and falls back to promiscuous mode as needed. * - * Drivers using secondary unicast addresses must set user_set_promisc when - * manually putting the device into promiscuous mode. + * Drivers using secondary unicast addresses must set user_set_promisc when + * manually putting the device into promiscuous mode. **/ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, u32 addr_count, ixgbe_mc_addr_itr next) @@ -2604,16 +2604,16 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, } /** - * ixgbe_mta_vector - Determines bit-vector in multicast table to set - * @hw: pointer to hardware structure - * @mc_addr: the multicast address + * ixgbe_mta_vector - Determines bit-vector in multicast table to set + * @hw: pointer to hardware structure + * @mc_addr: the multicast address * - * Extracts the 12 bits, from a multicast address, to determine which - * bit-vector to set in the multicast table. The hardware uses 12 bits, from - * incoming rx multicast addresses, to determine the bit-vector to check in - * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set - * by the MO field of the MCSTCTRL. The MO field is set during initialization - * to mc_filter_type. + * Extracts the 12 bits, from a multicast address, to determine which + * bit-vector to set in the multicast table. The hardware uses 12 bits, from + * incoming rx multicast addresses, to determine the bit-vector to check in + * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set + * by the MO field of the MCSTCTRL. The MO field is set during initialization + * to mc_filter_type. **/ STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) { @@ -2646,11 +2646,11 @@ STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) } /** - * ixgbe_set_mta - Set bit-vector in multicast table - * @hw: pointer to hardware structure - * @mc_addr: Multicast address + * ixgbe_set_mta - Set bit-vector in multicast table + * @hw: pointer to hardware structure + * @mc_addr: Multicast address * - * Sets the bit-vector in the multicast table. + * Sets the bit-vector in the multicast table. **/ void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) { @@ -2680,15 +2680,15 @@ void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) } /** - * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses - * @hw: pointer to hardware structure - * @mc_addr_list: the list of new multicast addresses - * @mc_addr_count: number of addresses - * @next: iterator function to walk the multicast address list - * @clear: flag, when set clears the table beforehand + * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses + * @hw: pointer to hardware structure + * @mc_addr_list: the list of new multicast addresses + * @mc_addr_count: number of addresses + * @next: iterator function to walk the multicast address list + * @clear: flag, when set clears the table beforehand * - * When the clear flag is set, the given list replaces any existing list. - * Hashes the given addresses into the multicast table. + * When the clear flag is set, the given list replaces any existing list. + * Hashes the given addresses into the multicast table. **/ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, u32 mc_addr_count, ixgbe_mc_addr_itr next, @@ -2732,10 +2732,10 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, } /** - * ixgbe_enable_mc_generic - Enable multicast address in RAR - * @hw: pointer to hardware structure + * ixgbe_enable_mc_generic - Enable multicast address in RAR + * @hw: pointer to hardware structure * - * Enables multicast address in RAR and the use of the multicast hash table. + * Enables multicast address in RAR and the use of the multicast hash table. **/ s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) { @@ -2751,10 +2751,10 @@ s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) } /** - * ixgbe_disable_mc_generic - Disable multicast address in RAR - * @hw: pointer to hardware structure + * ixgbe_disable_mc_generic - Disable multicast address in RAR + * @hw: pointer to hardware structure * - * Disables multicast address in RAR and the use of the multicast hash table. + * Disables multicast address in RAR and the use of the multicast hash table. **/ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) { @@ -2769,10 +2769,10 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) } /** - * ixgbe_fc_enable_generic - Enable flow control - * @hw: pointer to hardware structure + * ixgbe_fc_enable_generic - Enable flow control + * @hw: pointer to hardware structure * - * Enable flow control according to the current settings. + * Enable flow control according to the current settings. **/ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) { @@ -2902,17 +2902,17 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) } /** - * ixgbe_negotiate_fc - Negotiate flow control - * @hw: pointer to hardware structure - * @adv_reg: flow control advertised settings - * @lp_reg: link partner's flow control settings - * @adv_sym: symmetric pause bit in advertisement - * @adv_asm: asymmetric pause bit in advertisement - * @lp_sym: symmetric pause bit in link partner advertisement - * @lp_asm: asymmetric pause bit in link partner advertisement + * ixgbe_negotiate_fc - Negotiate flow control + * @hw: pointer to hardware structure + * @adv_reg: flow control advertised settings + * @lp_reg: link partner's flow control settings + * @adv_sym: symmetric pause bit in advertisement + * @adv_asm: asymmetric pause bit in advertisement + * @lp_sym: symmetric pause bit in link partner advertisement + * @lp_asm: asymmetric pause bit in link partner advertisement * - * Find the intersection between advertised settings and link partner's - * advertised settings + * Find the intersection between advertised settings and link partner's + * advertised settings **/ s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) @@ -2956,10 +2956,10 @@ s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, } /** - * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber + * @hw: pointer to hardware structure * - * Enable flow control according on 1 gig fiber. + * Enable flow control according on 1 gig fiber. **/ STATIC s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) { @@ -2993,10 +2993,10 @@ STATIC s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure * - * Enable flow control according to IEEE clause 37. + * Enable flow control according to IEEE clause 37. **/ STATIC s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) { @@ -3037,10 +3037,10 @@ STATIC s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) } /** - * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure * - * Enable flow control according to IEEE clause 37. + * Enable flow control according to IEEE clause 37. **/ STATIC s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) { @@ -3061,11 +3061,11 @@ STATIC s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) } /** - * ixgbe_fc_autoneg - Configure flow control - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg - Configure flow control + * @hw: pointer to hardware structure * - * Compares our advertised flow control capabilities to those advertised by - * our link partner, and determines the proper flow control mode to use. + * Compares our advertised flow control capabilities to those advertised by + * our link partner, and determines the proper flow control mode to use. **/ void ixgbe_fc_autoneg(struct ixgbe_hw *hw) { @@ -3173,13 +3173,13 @@ STATIC u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw) } /** - * ixgbe_disable_pcie_master - Disable PCI-express master access - * @hw: pointer to hardware structure + * ixgbe_disable_pcie_master - Disable PCI-express master access + * @hw: pointer to hardware structure * - * Disables PCI-Express master access and verifies there are no pending - * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable - * bit hasn't caused the master requests to be disabled, else IXGBE_SUCCESS - * is returned signifying master requests disabled. + * Disables PCI-Express master access and verifies there are no pending + * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable + * bit hasn't caused the master requests to be disabled, else IXGBE_SUCCESS + * is returned signifying master requests disabled. **/ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) { @@ -3241,12 +3241,12 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) } /** - * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire + * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire * - * Acquires the SWFW semaphore through the GSSR register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) + * Acquires the SWFW semaphore through the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) **/ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask) { @@ -3288,12 +3288,12 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_release_swfw_sync - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release + * ixgbe_release_swfw_sync - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release * - * Releases the SWFW semaphore through the GSSR register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) + * Releases the SWFW semaphore through the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) **/ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask) { @@ -3312,11 +3312,11 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_disable_sec_rx_path_generic - Stops the receive data path - * @hw: pointer to hardware structure + * ixgbe_disable_sec_rx_path_generic - Stops the receive data path + * @hw: pointer to hardware structure * - * Stops the receive data path and waits for the HW to internally empty - * the Rx security block + * Stops the receive data path and waits for the HW to internally empty + * the Rx security block **/ s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw) { @@ -3349,12 +3349,12 @@ s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw) } /** - * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read - * @hw: pointer to hardware structure - * @locked: bool to indicate whether the SW/FW lock was taken - * @reg_val: Value we read from AUTOC + * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read + * @hw: pointer to hardware structure + * @locked: bool to indicate whether the SW/FW lock was taken + * @reg_val: Value we read from AUTOC * - * The default case requires no protection so just to the register read. + * The default case requires no protection so just to the register read. */ s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) { @@ -3368,7 +3368,7 @@ s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) * @hw: pointer to hardware structure * @reg_val: value to write to AUTOC * @locked: bool to indicate whether the SW/FW lock was already taken by - * previous read. + * previous read. * * The default case requires no protection so just to the register write. */ @@ -3381,10 +3381,10 @@ s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked) } /** - * ixgbe_enable_sec_rx_path_generic - Enables the receive data path - * @hw: pointer to hardware structure + * ixgbe_enable_sec_rx_path_generic - Enables the receive data path + * @hw: pointer to hardware structure * - * Enables the receive data path. + * Enables the receive data path. **/ s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw) { @@ -3401,11 +3401,11 @@ s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw) } /** - * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL + * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL * - * Enables the Rx DMA unit + * Enables the Rx DMA unit **/ s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) { @@ -3420,9 +3420,9 @@ s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) } /** - * ixgbe_blink_led_start_generic - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink + * ixgbe_blink_led_start_generic - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink **/ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) { @@ -3470,9 +3470,9 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking + * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking **/ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) { @@ -3509,13 +3509,13 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) } /** - * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM - * @hw: pointer to hardware structure - * @san_mac_offset: SAN MAC address offset + * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_offset: SAN MAC address offset * - * This function will read the EEPROM location for the SAN MAC address - * pointer, and returns the value at that location. This is used in both - * get and set mac_addr routines. + * This function will read the EEPROM location for the SAN MAC address + * pointer, and returns the value at that location. This is used in both + * get and set mac_addr routines. **/ STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, u16 *san_mac_offset) @@ -3540,14 +3540,14 @@ STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, } /** - * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address + * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address * - * Reads the SAN MAC address from the EEPROM, if it's available. This is - * per-port, so set_lan_id() must be called before reading the addresses. - * set_lan_id() is called by identify_sfp(), but this cannot be relied - * upon for non-SFP connections, so we must call it here. + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. + * set_lan_id() is called by identify_sfp(), but this cannot be relied + * upon for non-SFP connections, so we must call it here. **/ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) { @@ -3596,11 +3596,11 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) } /** - * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address + * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address * - * Write a SAN MAC address to the EEPROM. + * Write a SAN MAC address to the EEPROM. **/ s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) { @@ -3632,11 +3632,11 @@ s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) } /** - * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count - * @hw: pointer to hardware structure + * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count + * @hw: pointer to hardware structure * - * Read PCIe configuration space, and get the MSI-X vector count from - * the capabilities table. + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. **/ u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) { @@ -3677,13 +3677,13 @@ u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) } /** - * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address - * @hw: pointer to hardware structure - * @addr: Address to put into receive address register - * @vmdq: VMDq pool to assign + * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address + * @hw: pointer to hardware structure + * @addr: Address to put into receive address register + * @vmdq: VMDq pool to assign * - * Puts an ethernet address into a receive address register, or - * finds the rar that it is aleady in; adds to the pool list + * Puts an ethernet address into a receive address register, or + * finds the rar that it is already in; adds to the pool list **/ s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) { @@ -3746,10 +3746,10 @@ s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) } /** - * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to disassociate - * @vmdq: VMDq pool index to remove from the rar + * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar **/ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -3800,10 +3800,10 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq pool index + * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq pool index **/ s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -3832,14 +3832,14 @@ s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * This function should only be involved in the IOV mode. - * In IOV mode, Default pool is next pool after the number of - * VFs advertized and not 0. - * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index] + * This function should only be involved in the IOV mode. + * In IOV mode, Default pool is next pool after the number of + * VFs advertized and not 0. + * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index] * - * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address - * @hw: pointer to hardware struct - * @vmdq: VMDq pool index + * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @vmdq: VMDq pool index **/ s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) { @@ -3859,8 +3859,8 @@ s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) } /** - * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array - * @hw: pointer to hardware structure + * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array + * @hw: pointer to hardware structure **/ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) { @@ -3876,14 +3876,14 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) } /** - * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vlvf_bypass: true to find vlanid only, false returns first empty slot if + * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vlvf_bypass: true to find vlanid only, false returns first empty slot if * vlanid not found * * - * return the VLVF index where this VLAN id should be placed + * return the VLVF index where this VLAN id should be placed * **/ s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) @@ -3927,14 +3927,14 @@ s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) } /** - * ixgbe_set_vfta_generic - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VLVFB - * @vlan_on: boolean flag to turn on/off VLAN - * @vlvf_bypass: boolean flag indicating updating default pool is okay + * ixgbe_set_vfta_generic - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VLVFB + * @vlan_on: boolean flag to turn on/off VLAN + * @vlvf_bypass: boolean flag indicating updating default pool is okay * - * Turn on/off specified VLAN in the VLAN filter table. + * Turn on/off specified VLAN in the VLAN filter table. **/ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, bool vlvf_bypass) @@ -3991,17 +3991,17 @@ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, } /** - * ixgbe_set_vlvf_generic - Set VLAN Pool Filter - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VLVFB - * @vlan_on: boolean flag to turn on/off VLAN in VLVF - * @vfta_delta: pointer to the difference between the current value of VFTA + * ixgbe_set_vlvf_generic - Set VLAN Pool Filter + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VLVFB + * @vlan_on: boolean flag to turn on/off VLAN in VLVF + * @vfta_delta: pointer to the difference between the current value of VFTA * and the desired value - * @vfta: the desired value of the VFTA - * @vlvf_bypass: boolean flag indicating updating default pool is okay + * @vfta: the desired value of the VFTA + * @vlvf_bypass: boolean flag indicating updating default pool is okay * - * Turn on/off specified bit in VLVF table. + * Turn on/off specified bit in VLVF table. **/ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, u32 *vfta_delta, u32 vfta, @@ -4080,10 +4080,10 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, } /** - * ixgbe_clear_vfta_generic - Clear VLAN filter table - * @hw: pointer to hardware structure + * ixgbe_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to hardware structure * - * Clears the VLAN filer table, and the VMDq index associated with the filter + * Clears the VLAN filer table, and the VMDq index associated with the filter **/ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) { @@ -4104,11 +4104,11 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) } /** - * ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix - * @hw: pointer to hardware structure + * ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix + * @hw: pointer to hardware structure * - * Contains the logic to identify if we need to verify link for the - * crosstalk fix + * Contains the logic to identify if we need to verify link for the + * crosstalk fix **/ static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw) { @@ -4130,13 +4130,13 @@ static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw) } /** - * ixgbe_check_mac_link_generic - Determine link and speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true when link is up - * @link_up_wait_to_complete: bool used to wait for link up or not + * ixgbe_check_mac_link_generic - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not * - * Reads the links register to determine if link is up and the current speed + * Reads the links register to determine if link is up and the current speed **/ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up, bool link_up_wait_to_complete) @@ -4243,14 +4243,14 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, } /** - * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from - * the EEPROM - * @hw: pointer to hardware structure - * @wwnn_prefix: the alternative WWNN prefix - * @wwpn_prefix: the alternative WWPN prefix + * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from + * the EEPROM + * @hw: pointer to hardware structure + * @wwnn_prefix: the alternative WWNN prefix + * @wwpn_prefix: the alternative WWPN prefix * - * This function will read the EEPROM from the alternative SAN MAC address - * block to check the support for the alternative WWNN/WWPN prefix support. + * This function will read the EEPROM from the alternative SAN MAC address + * block to check the support for the alternative WWNN/WWPN prefix support. **/ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, u16 *wwpn_prefix) @@ -4301,11 +4301,11 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, } /** - * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM - * @hw: pointer to hardware structure - * @bs: the fcoe boot status + * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM + * @hw: pointer to hardware structure + * @bs: the fcoe boot status * - * This function will read the FCOE boot status from the iSCSI FCOE block + * This function will read the FCOE boot status from the iSCSI FCOE block **/ s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs) { @@ -4350,10 +4350,10 @@ s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs) } /** - * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for MAC anti-spoofing - * @vf: Virtual Function pool - VF Pool to set for MAC anti-spoofing + * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for MAC anti-spoofing + * @vf: Virtual Function pool - VF Pool to set for MAC anti-spoofing * **/ void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) @@ -4374,10 +4374,10 @@ void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) } /** - * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for VLAN anti-spoofing - * @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing + * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for VLAN anti-spoofing + * @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing * **/ void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) @@ -4398,12 +4398,12 @@ void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) } /** - * ixgbe_get_device_caps_generic - Get additional device capabilities - * @hw: pointer to hardware structure - * @device_caps: the EEPROM word with the extra device capabilities + * ixgbe_get_device_caps_generic - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word with the extra device capabilities * - * This function will read the EEPROM location for the device capabilities, - * and return the word through device_caps. + * This function will read the EEPROM location for the device capabilities, + * and return the word through device_caps. **/ s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) { @@ -4415,8 +4415,8 @@ s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) } /** - * ixgbe_enable_relaxed_ordering_gen2 - Enable relaxed ordering - * @hw: pointer to hardware structure + * ixgbe_enable_relaxed_ordering_gen2 - Enable relaxed ordering + * @hw: pointer to hardware structure * **/ void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw) @@ -4443,11 +4443,11 @@ void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw) } /** - * ixgbe_calculate_checksum - Calculate checksum for buffer - * @buffer: pointer to EEPROM - * @length: size of EEPROM to calculate a checksum for - * Calculates the checksum for some buffer on a specified length. The - * checksum calculated is returned. + * ixgbe_calculate_checksum - Calculate checksum for buffer + * @buffer: pointer to EEPROM + * @length: size of EEPROM to calculate a checksum for + * Calculates the checksum for some buffer on a specified length. The + * checksum calculated is returned. **/ u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) { @@ -4466,18 +4466,18 @@ u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) } /** - * ixgbe_hic_unlocked - Issue command to manageability block unlocked - * @hw: pointer to the HW structure - * @buffer: command to write and where the return status will be placed - * @length: length of buffer, must be multiple of 4 bytes - * @timeout: time in ms to wait for command completion + * ixgbe_hic_unlocked - Issue command to manageability block unlocked + * @hw: pointer to the HW structure + * @buffer: command to write and where the return status will be placed + * @length: length of buffer, must be multiple of 4 bytes + * @timeout: time in ms to wait for command completion * - * Communicates with the manageability block. On success return IXGBE_SUCCESS - * else returns semaphore error when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + * Communicates with the manageability block. On success return IXGBE_SUCCESS + * else returns semaphore error when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. * - * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held - * by the caller. + * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held + * by the caller. **/ s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, u32 timeout) @@ -4547,22 +4547,22 @@ s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, } /** - * ixgbe_host_interface_command - Issue command to manageability block - * @hw: pointer to the HW structure - * @buffer: contains the command to write and where the return status will - * be placed - * @length: length of buffer, must be multiple of 4 bytes - * @timeout: time in ms to wait for command completion - * @return_data: read and return data from the buffer (true) or not (false) - * Needed because FW structures are big endian and decoding of - * these fields can be 8 bit or 16 bit based on command. Decoding - * is not easily understood without making a table of commands. - * So we will leave this up to the caller to read back the data - * in these cases. + * ixgbe_host_interface_command - Issue command to manageability block + * @hw: pointer to the HW structure + * @buffer: contains the command to write and where the return status will + * be placed + * @length: length of buffer, must be multiple of 4 bytes + * @timeout: time in ms to wait for command completion + * @return_data: read and return data from the buffer (true) or not (false) + * Needed because FW structures are big endian and decoding of + * these fields can be 8 bit or 16 bit based on command. Decoding + * is not easily understood without making a table of commands. + * So we will leave this up to the caller to read back the data + * in these cases. * - * Communicates with the manageability block. On success return IXGBE_SUCCESS - * else returns semaphore error when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + * Communicates with the manageability block. On success return IXGBE_SUCCESS + * else returns semaphore error when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. **/ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, u32 length, u32 timeout, bool return_data) @@ -4645,19 +4645,19 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, } /** - * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware - * @hw: pointer to the HW structure - * @maj: driver version major number - * @min: driver version minor number - * @build: driver version build number - * @sub: driver version sub build number - * @len: unused - * @driver_ver: unused + * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware + * @hw: pointer to the HW structure + * @maj: driver version major number + * @min: driver version minor number + * @build: driver version build number + * @sub: driver version sub build number + * @len: unused + * @driver_ver: unused * - * Sends driver version number to firmware through the manageability - * block. On success return IXGBE_SUCCESS - * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + * Sends driver version number to firmware through the manageability + * block. On success return IXGBE_SUCCESS + * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. **/ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, u8 sub, u16 len, @@ -4838,10 +4838,10 @@ STATIC const u8 ixgbe_emc_therm_limit[4] = { }; /** - * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data - * @hw: pointer to hardware structure + * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data + * @hw: pointer to hardware structure * - * Returns the thermal sensor data structure + * Returns the thermal sensor data structure **/ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) { @@ -4912,11 +4912,11 @@ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) } /** - * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds - * @hw: pointer to hardware structure + * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds + * @hw: pointer to hardware structure * - * Inits the thermal sensor thresholds according to the NVM map - * and save off the threshold and location values into mac.thermal_sensor_data + * Inits the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data **/ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) { @@ -4993,13 +4993,13 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) } /** - * ixgbe_get_orom_version - Return option ROM from EEPROM + * ixgbe_get_orom_version - Return option ROM from EEPROM * - * @hw: pointer to hardware structure - * @nvm_ver: pointer to output structure + * @hw: pointer to hardware structure + * @nvm_ver: pointer to output structure * - * if valid option ROM version, nvm_ver->or_valid set to true - * else nvm_ver->or_valid is false. + * if valid option ROM version, nvm_ver->or_valid set to true + * else nvm_ver->or_valid is false. **/ void ixgbe_get_orom_version(struct ixgbe_hw *hw, struct ixgbe_nvm_version *nvm_ver) @@ -5031,13 +5031,13 @@ void ixgbe_get_orom_version(struct ixgbe_hw *hw, } /** - * ixgbe_get_oem_prod_version - Return OEM Product version + * ixgbe_get_oem_prod_version - Return OEM Product version * - * @hw: pointer to hardware structure - * @nvm_ver: pointer to output structure + * @hw: pointer to hardware structure + * @nvm_ver: pointer to output structure * - * if valid OEM product version, nvm_ver->oem_valid set to true - * else nvm_ver->oem_valid is false. + * if valid OEM product version, nvm_ver->oem_valid set to true + * else nvm_ver->oem_valid is false. **/ void ixgbe_get_oem_prod_version(struct ixgbe_hw *hw, struct ixgbe_nvm_version *nvm_ver) @@ -5075,12 +5075,12 @@ void ixgbe_get_oem_prod_version(struct ixgbe_hw *hw, } /** - * ixgbe_get_etk_id - Return Etrack ID from EEPROM + * ixgbe_get_etk_id - Return Etrack ID from EEPROM * - * @hw: pointer to hardware structure - * @nvm_ver: pointer to output structure + * @hw: pointer to hardware structure + * @nvm_ver: pointer to output structure * - * word read errors will return 0xFFFF + * word read errors will return 0xFFFF **/ void ixgbe_get_etk_id(struct ixgbe_hw *hw, struct ixgbe_nvm_version *nvm_ver) { @@ -5206,12 +5206,12 @@ bool ixgbe_mng_enabled(struct ixgbe_hw *hw) } /** - * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Set the link speed in the MAC and/or PHY register and restarts link. + * Set the link speed in the MAC and/or PHY register and restarts link. **/ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -5351,11 +5351,11 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, } /** - * ixgbe_set_soft_rate_select_speed - Set module link speed - * @hw: pointer to hardware structure - * @speed: link speed to set + * ixgbe_set_soft_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set * - * Set module link speed via the soft rate select. + * Set module link speed via the soft rate select. */ void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) diff --git a/drivers/net/ixgbe/base/ixgbe_dcb.c b/drivers/net/ixgbe/base/ixgbe_dcb.c index 53def2146e..41469c10db 100644 --- a/drivers/net/ixgbe/base/ixgbe_dcb.c +++ b/drivers/net/ixgbe/base/ixgbe_dcb.c @@ -270,11 +270,11 @@ void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *cfg, int direction, * The following rules are checked: * 1. The sum of bandwidth percentages of all Bandwidth Groups must total 100%. * 2. The sum of bandwidth percentages of all Traffic Classes within a Bandwidth - * Group must total 100. + * Group must total 100. * 3. A Traffic Class should not be set to both Link Strict Priority - * and Group Strict Priority. + * and Group Strict Priority. * 4. Link strict Bandwidth Groups can only have link strict traffic classes - * with zero bandwidth. + * with zero bandwidth. */ s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *dcb_config) { diff --git a/drivers/net/ixgbe/base/ixgbe_hv_vf.c b/drivers/net/ixgbe/base/ixgbe_hv_vf.c index 6005c4ac93..b7ad44ab8c 100644 --- a/drivers/net/ixgbe/base/ixgbe_hv_vf.c +++ b/drivers/net/ixgbe/base/ixgbe_hv_vf.c @@ -182,10 +182,10 @@ static s32 ixgbevf_hv_set_rlpml_vf(struct ixgbe_hw *hw, u16 max_size) } /** - * ixgbevf_hv_negotiate_api_version_vf - Negotiate supported API version - * @hw: pointer to the HW structure - * @api: integer containing requested API version - * Hyper-V version - only ixgbe_mbox_api_10 supported. + * ixgbevf_hv_negotiate_api_version_vf - Negotiate supported API version + * @hw: pointer to the HW structure + * @api: integer containing requested API version + * Hyper-V version - only ixgbe_mbox_api_10 supported. **/ static int ixgbevf_hv_negotiate_api_version_vf(struct ixgbe_hw *hw, int api) { @@ -199,13 +199,13 @@ static int ixgbevf_hv_negotiate_api_version_vf(struct ixgbe_hw *hw, int api) } /** - * ixgbevf_hv_init_ops_vf - Initialize the pointers for vf - * @hw: pointer to hardware structure + * ixgbevf_hv_init_ops_vf - Initialize the pointers for vf + * @hw: pointer to hardware structure * - * This will assign function pointers, adapter-specific functions can - * override the assignment of generic function pointers by assigning - * their own adapter-specific function pointers. - * Does not touch the hardware. + * This will assign function pointers, adapter-specific functions can + * override the assignment of generic function pointers by assigning + * their own adapter-specific function pointers. + * Does not touch the hardware. **/ s32 ixgbevf_hv_init_ops_vf(struct ixgbe_hw *hw) { diff --git a/drivers/net/ixgbe/base/ixgbe_mbx.c b/drivers/net/ixgbe/base/ixgbe_mbx.c index d204db7a14..4dddff2c58 100644 --- a/drivers/net/ixgbe/base/ixgbe_mbx.c +++ b/drivers/net/ixgbe/base/ixgbe_mbx.c @@ -6,13 +6,13 @@ #include "ixgbe_mbx.h" /** - * ixgbe_read_mbx - Reads a message from the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to read + * ixgbe_read_mbx - Reads a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to read * - * returns SUCCESS if it successfully read message from buffer + * returns SUCCESS if it successfully read message from buffer **/ s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) { @@ -32,13 +32,13 @@ s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) } /** - * ixgbe_write_mbx - Write a message to the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to write + * ixgbe_write_mbx - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write * - * returns SUCCESS if it successfully copied message into the buffer + * returns SUCCESS if it successfully copied message into the buffer **/ s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) { @@ -58,11 +58,11 @@ s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) } /** - * ixgbe_check_for_msg - checks to see if someone sent us mail - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check + * ixgbe_check_for_msg - checks to see if someone sent us mail + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check * - * returns SUCCESS if the Status bit was found or else ERR_MBX + * returns SUCCESS if the Status bit was found or else ERR_MBX **/ s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id) { @@ -78,11 +78,11 @@ s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_check_for_ack - checks to see if someone sent us ACK - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check + * ixgbe_check_for_ack - checks to see if someone sent us ACK + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check * - * returns SUCCESS if the Status bit was found or else ERR_MBX + * returns SUCCESS if the Status bit was found or else ERR_MBX **/ s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id) { @@ -98,11 +98,11 @@ s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_check_for_rst - checks to see if other side has reset - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check + * ixgbe_check_for_rst - checks to see if other side has reset + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check * - * returns SUCCESS if the Status bit was found or else ERR_MBX + * returns SUCCESS if the Status bit was found or else ERR_MBX **/ s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id) { @@ -118,11 +118,11 @@ s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_poll_for_msg - Wait for message notification - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to write + * ixgbe_poll_for_msg - Wait for message notification + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write * - * returns SUCCESS if it successfully received a message notification + * returns SUCCESS if it successfully received a message notification **/ STATIC s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id) { @@ -150,11 +150,11 @@ STATIC s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_poll_for_ack - Wait for message acknowledgment - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to write + * ixgbe_poll_for_ack - Wait for message acknowledgment + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write * - * returns SUCCESS if it successfully received a message acknowledgment + * returns SUCCESS if it successfully received a message acknowledgment **/ STATIC s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id) { @@ -182,14 +182,14 @@ STATIC s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_read_posted_mbx - Wait for message notification and receive message - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to write + * ixgbe_read_posted_mbx - Wait for message notification and receive message + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write * - * returns SUCCESS if it successfully received a message notification and - * copied it into the receive buffer. + * returns SUCCESS if it successfully received a message notification and + * copied it into the receive buffer. **/ s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) { @@ -211,14 +211,14 @@ s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) } /** - * ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to write + * ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write * - * returns SUCCESS if it successfully copied message into the buffer and - * received an ack to that message within delay * timeout period + * returns SUCCESS if it successfully copied message into the buffer and + * received an ack to that message within delay * timeout period **/ s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) @@ -243,10 +243,10 @@ s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, } /** - * ixgbe_init_mbx_ops_generic - Initialize MB function pointers - * @hw: pointer to the HW structure + * ixgbe_init_mbx_ops_generic - Initialize MB function pointers + * @hw: pointer to the HW structure * - * Setups up the mailbox read and write message function pointers + * Setups up the mailbox read and write message function pointers **/ void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw) { @@ -257,11 +257,11 @@ void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw) } /** - * ixgbe_read_v2p_mailbox - read v2p mailbox - * @hw: pointer to the HW structure + * ixgbe_read_v2p_mailbox - read v2p mailbox + * @hw: pointer to the HW structure * - * This function is used to read the v2p mailbox without losing the read to - * clear status bits. + * This function is used to read the v2p mailbox without losing the read to + * clear status bits. **/ STATIC u32 ixgbe_read_v2p_mailbox(struct ixgbe_hw *hw) { @@ -274,12 +274,12 @@ STATIC u32 ixgbe_read_v2p_mailbox(struct ixgbe_hw *hw) } /** - * ixgbe_check_for_bit_vf - Determine if a status bit was set - * @hw: pointer to the HW structure - * @mask: bitmask for bits to be tested and cleared + * ixgbe_check_for_bit_vf - Determine if a status bit was set + * @hw: pointer to the HW structure + * @mask: bitmask for bits to be tested and cleared * - * This function is used to check for the read to clear bits within - * the V2P mailbox. + * This function is used to check for the read to clear bits within + * the V2P mailbox. **/ STATIC s32 ixgbe_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask) { @@ -295,11 +295,11 @@ STATIC s32 ixgbe_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_check_for_msg_vf - checks to see if the PF has sent mail - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check + * ixgbe_check_for_msg_vf - checks to see if the PF has sent mail + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check * - * returns SUCCESS if the PF has set the Status bit or else ERR_MBX + * returns SUCCESS if the PF has set the Status bit or else ERR_MBX **/ STATIC s32 ixgbe_check_for_msg_vf(struct ixgbe_hw *hw, u16 mbx_id) { @@ -317,11 +317,11 @@ STATIC s32 ixgbe_check_for_msg_vf(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_check_for_ack_vf - checks to see if the PF has ACK'd - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check + * ixgbe_check_for_ack_vf - checks to see if the PF has ACK'd + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check * - * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX + * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX **/ STATIC s32 ixgbe_check_for_ack_vf(struct ixgbe_hw *hw, u16 mbx_id) { @@ -339,11 +339,11 @@ STATIC s32 ixgbe_check_for_ack_vf(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_check_for_rst_vf - checks to see if the PF has reset - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check + * ixgbe_check_for_rst_vf - checks to see if the PF has reset + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check * - * returns true if the PF has set the reset done bit or else false + * returns true if the PF has set the reset done bit or else false **/ STATIC s32 ixgbe_check_for_rst_vf(struct ixgbe_hw *hw, u16 mbx_id) { @@ -362,10 +362,10 @@ STATIC s32 ixgbe_check_for_rst_vf(struct ixgbe_hw *hw, u16 mbx_id) } /** - * ixgbe_obtain_mbx_lock_vf - obtain mailbox lock - * @hw: pointer to the HW structure + * ixgbe_obtain_mbx_lock_vf - obtain mailbox lock + * @hw: pointer to the HW structure * - * return SUCCESS if we obtained the mailbox lock + * return SUCCESS if we obtained the mailbox lock **/ STATIC s32 ixgbe_obtain_mbx_lock_vf(struct ixgbe_hw *hw) { @@ -384,13 +384,13 @@ STATIC s32 ixgbe_obtain_mbx_lock_vf(struct ixgbe_hw *hw) } /** - * ixgbe_write_mbx_vf - Write a message to the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to write + * ixgbe_write_mbx_vf - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write * - * returns SUCCESS if it successfully copied message into the buffer + * returns SUCCESS if it successfully copied message into the buffer **/ STATIC s32 ixgbe_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) @@ -426,13 +426,13 @@ STATIC s32 ixgbe_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size, } /** - * ixgbe_read_mbx_vf - Reads a message from the inbox intended for vf - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to read + * ixgbe_read_mbx_vf - Reads a message from the inbox intended for vf + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to read * - * returns SUCCESS if it successfully read message from buffer + * returns SUCCESS if it successfully read message from buffer **/ STATIC s32 ixgbe_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) @@ -463,10 +463,10 @@ STATIC s32 ixgbe_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size, } /** - * ixgbe_init_mbx_params_vf - set initial values for vf mailbox - * @hw: pointer to the HW structure + * ixgbe_init_mbx_params_vf - set initial values for vf mailbox + * @hw: pointer to the HW structure * - * Initializes the hw->mbx struct to correct values for vf mailbox + * Initializes the hw->mbx struct to correct values for vf mailbox */ void ixgbe_init_mbx_params_vf(struct ixgbe_hw *hw) { @@ -508,11 +508,11 @@ STATIC s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index) } /** - * ixgbe_check_for_msg_pf - checks to see if the VF has sent mail - * @hw: pointer to the HW structure - * @vf_number: the VF index + * ixgbe_check_for_msg_pf - checks to see if the VF has sent mail + * @hw: pointer to the HW structure + * @vf_number: the VF index * - * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX **/ STATIC s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number) { @@ -532,11 +532,11 @@ STATIC s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number) } /** - * ixgbe_check_for_ack_pf - checks to see if the VF has ACKed - * @hw: pointer to the HW structure - * @vf_number: the VF index + * ixgbe_check_for_ack_pf - checks to see if the VF has ACKed + * @hw: pointer to the HW structure + * @vf_number: the VF index * - * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX **/ STATIC s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number) { @@ -556,11 +556,11 @@ STATIC s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number) } /** - * ixgbe_check_for_rst_pf - checks to see if the VF has reset - * @hw: pointer to the HW structure - * @vf_number: the VF index + * ixgbe_check_for_rst_pf - checks to see if the VF has reset + * @hw: pointer to the HW structure + * @vf_number: the VF index * - * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX **/ STATIC s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number) { @@ -595,11 +595,11 @@ STATIC s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number) } /** - * ixgbe_obtain_mbx_lock_pf - obtain mailbox lock - * @hw: pointer to the HW structure - * @vf_number: the VF index + * ixgbe_obtain_mbx_lock_pf - obtain mailbox lock + * @hw: pointer to the HW structure + * @vf_number: the VF index * - * return SUCCESS if we obtained the mailbox lock + * return SUCCESS if we obtained the mailbox lock **/ STATIC s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number) { @@ -624,13 +624,13 @@ STATIC s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number) } /** - * ixgbe_write_mbx_pf - Places a message in the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @vf_number: the VF index + * ixgbe_write_mbx_pf - Places a message in the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index * - * returns SUCCESS if it successfully copied message into the buffer + * returns SUCCESS if it successfully copied message into the buffer **/ STATIC s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 vf_number) @@ -665,15 +665,15 @@ STATIC s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size, } /** - * ixgbe_read_mbx_pf - Read a message from the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @vf_number: the VF index + * ixgbe_read_mbx_pf - Read a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index * - * This function copies a message from the mailbox buffer to the caller's - * memory buffer. The presumption is that the caller knows that there was - * a message due to a VF request so no polling for message is needed. + * This function copies a message from the mailbox buffer to the caller's + * memory buffer. The presumption is that the caller knows that there was + * a message due to a VF request so no polling for message is needed. **/ STATIC s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 vf_number) @@ -703,10 +703,10 @@ STATIC s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size, } /** - * ixgbe_init_mbx_params_pf - set initial values for pf mailbox - * @hw: pointer to the HW structure + * ixgbe_init_mbx_params_pf - set initial values for pf mailbox + * @hw: pointer to the HW structure * - * Initializes the hw->mbx struct to correct values for pf mailbox + * Initializes the hw->mbx struct to correct values for pf mailbox */ void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw) { diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c index a8243fa974..13f00ac674 100644 --- a/drivers/net/ixgbe/base/ixgbe_phy.c +++ b/drivers/net/ixgbe/base/ixgbe_phy.c @@ -214,10 +214,10 @@ s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg, } /** - * ixgbe_init_phy_ops_generic - Inits PHY function ptrs - * @hw: pointer to the hardware structure + * ixgbe_init_phy_ops_generic - Inits PHY function ptrs + * @hw: pointer to the hardware structure * - * Initialize the function pointers. + * Initialize the function pointers. **/ s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw) { @@ -288,10 +288,10 @@ static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr) } /** - * ixgbe_identify_phy_generic - Get physical layer module - * @hw: pointer to hardware structure + * ixgbe_identify_phy_generic - Get physical layer module + * @hw: pointer to hardware structure * - * Determines the physical layer module found on the current adapter. + * Determines the physical layer module found on the current adapter. **/ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) { @@ -367,9 +367,9 @@ s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw) } /** - * ixgbe_validate_phy_addr - Determines phy address is valid - * @hw: pointer to hardware structure - * @phy_addr: PHY address + * ixgbe_validate_phy_addr - Determines phy address is valid + * @hw: pointer to hardware structure + * @phy_addr: PHY address * **/ bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) @@ -392,8 +392,8 @@ bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) } /** - * ixgbe_get_phy_id - Get the phy type - * @hw: pointer to hardware structure + * ixgbe_get_phy_id - Get the phy type + * @hw: pointer to hardware structure * **/ s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) @@ -423,8 +423,8 @@ s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) } /** - * ixgbe_get_phy_type_from_id - Get the phy type - * @phy_id: PHY ID information + * ixgbe_get_phy_type_from_id - Get the phy type + * @phy_id: PHY ID information * **/ enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) @@ -464,8 +464,8 @@ enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) } /** - * ixgbe_reset_phy_generic - Performs a PHY reset - * @hw: pointer to hardware structure + * ixgbe_reset_phy_generic - Performs a PHY reset + * @hw: pointer to hardware structure **/ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) { @@ -543,12 +543,12 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) } /** - * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without - * the SWFW lock - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @device_type: 5 bit device type - * @phy_data: Pointer to read data from PHY register + * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without + * the SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type + * @phy_data: Pointer to read data from PHY register **/ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) @@ -625,12 +625,12 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, } /** - * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register - * using the SWFW lock - this function is needed in most cases - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @device_type: 5 bit device type - * @phy_data: Pointer to read data from PHY register + * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * using the SWFW lock - this function is needed in most cases + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type + * @phy_data: Pointer to read data from PHY register **/ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) @@ -651,12 +651,12 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register - * without SWFW lock - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 5 bit device type - * @phy_data: Data to write to the PHY register + * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register + * without SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register **/ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) @@ -725,12 +725,12 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register - * using SWFW lock- this function is needed in most cases - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 5 bit device type - * @phy_data: Data to write to the PHY register + * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * using SWFW lock- this function is needed in most cases + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register **/ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) @@ -752,10 +752,10 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_setup_phy_link_generic - Set and restart auto-neg - * @hw: pointer to hardware structure + * ixgbe_setup_phy_link_generic - Set and restart auto-neg + * @hw: pointer to hardware structure * - * Restart auto-negotiation and PHY and waits for completion. + * Restart auto-negotiation and PHY and waits for completion. **/ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) { @@ -843,10 +843,10 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) } /** - * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: unused + * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: unused **/ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -928,10 +928,10 @@ static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw) } /** - * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: boolean auto-negotiation value + * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value **/ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -950,13 +950,13 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, } /** - * ixgbe_check_phy_link_tnx - Determine link and speed status - * @hw: pointer to hardware structure - * @speed: current link speed - * @link_up: true is link is up, false otherwise + * ixgbe_check_phy_link_tnx - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: current link speed + * @link_up: true is link is up, false otherwise * - * Reads the VS1 register to determine if link is up and the current speed for - * the PHY. + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. **/ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up) @@ -1079,9 +1079,9 @@ s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) } /** - * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version - * @hw: pointer to hardware structure - * @firmware_version: pointer to the PHY Firmware Version + * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version **/ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, u16 *firmware_version) @@ -1098,9 +1098,9 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, } /** - * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version - * @hw: pointer to hardware structure - * @firmware_version: pointer to the PHY Firmware Version + * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version **/ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, u16 *firmware_version) @@ -1117,8 +1117,8 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, } /** - * ixgbe_reset_phy_nl - Performs a PHY reset - * @hw: pointer to hardware structure + * ixgbe_reset_phy_nl - Performs a PHY reset + * @hw: pointer to hardware structure **/ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) { @@ -1233,10 +1233,10 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) } /** - * ixgbe_identify_module_generic - Identifies module type - * @hw: pointer to hardware structure + * ixgbe_identify_module_generic - Identifies module type + * @hw: pointer to hardware structure * - * Determines HW type and calls appropriate function. + * Determines HW type and calls appropriate function. **/ s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) { @@ -1263,10 +1263,10 @@ s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) } /** - * ixgbe_identify_sfp_module_generic - Identifies SFP modules - * @hw: pointer to hardware structure + * ixgbe_identify_sfp_module_generic - Identifies SFP modules + * @hw: pointer to hardware structure * - * Searches for and identifies the SFP module and assigns appropriate PHY type. + * Searches for and identifies the SFP module and assigns appropriate PHY type. **/ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) { @@ -1558,10 +1558,10 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) } /** - * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type - * @hw: pointer to hardware structure + * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type + * @hw: pointer to hardware structure * - * Determines physical layer capabilities of the current SFP. + * Determines physical layer capabilities of the current SFP. */ u64 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw) { @@ -1620,10 +1620,10 @@ u64 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw) } /** - * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules - * @hw: pointer to hardware structure + * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules + * @hw: pointer to hardware structure * - * Searches for and identifies the QSFP module and assigns appropriate PHY type + * Searches for and identifies the QSFP module and assigns appropriate PHY type **/ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) { @@ -1813,13 +1813,13 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) } /** - * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence - * @hw: pointer to hardware structure - * @list_offset: offset to the SFP ID list - * @data_offset: offset to the SFP data block + * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence + * @hw: pointer to hardware structure + * @list_offset: offset to the SFP ID list + * @data_offset: offset to the SFP data block * - * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if - * so it returns the offsets to the phy init sequence block. + * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if + * so it returns the offsets to the phy init sequence block. **/ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *list_offset, @@ -1910,12 +1910,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, } /** - * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read + * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface. + * Performs byte read operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) @@ -1928,12 +1928,12 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: byte offset at address 0xA2 - * @sff8472_data: value read + * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @sff8472_data: value read * - * Performs byte read operation to SFP module's SFF-8472 data over I2C + * Performs byte read operation to SFP module's SFF-8472 data over I2C **/ STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 *sff8472_data) @@ -1944,12 +1944,12 @@ STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to write - * @eeprom_data: value to write + * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to write + * @eeprom_data: value to write * - * Performs byte write operation to SFP module's EEPROM over I2C interface. + * Performs byte write operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data) @@ -1977,15 +1977,15 @@ STATIC bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr) } /** - * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: address to read from - * @data: value read - * @lock: true if to take and release semaphore + * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: address to read from + * @data: value read + * @lock: true if to take and release semaphore * - * Performs byte read operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ STATIC s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data, bool lock) @@ -2069,14 +2069,14 @@ STATIC s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: address to read from - * @data: value read + * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: address to read from + * @data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) @@ -2086,14 +2086,14 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: address to read from - * @data: value read + * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: address to read from + * @data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) @@ -2103,15 +2103,15 @@ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: address to write to - * @data: value to write - * @lock: true if to take and release semaphore + * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: address to write to + * @data: value to write + * @lock: true if to take and release semaphore * - * Performs byte write operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ STATIC s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data, bool lock) @@ -2175,14 +2175,14 @@ STATIC s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: address to write to - * @data: value to write + * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: address to write to + * @data: value to write * - * Performs byte write operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) @@ -2192,14 +2192,14 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: address to write to - * @data: value to write + * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: address to write to + * @data: value to write * - * Performs byte write operation to SFP module's EEPROM over I2C interface at - * a specified device address. + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. **/ s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) @@ -2209,11 +2209,11 @@ s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_i2c_start - Sets I2C start condition - * @hw: pointer to hardware structure + * ixgbe_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure * - * Sets I2C start condition (High -> Low on SDA while SCL is High) - * Set bit-bang mode on X550 hardware. + * Sets I2C start condition (High -> Low on SDA while SCL is High) + * Set bit-bang mode on X550 hardware. **/ STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw) { @@ -2243,12 +2243,12 @@ STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw) } /** - * ixgbe_i2c_stop - Sets I2C stop condition - * @hw: pointer to hardware structure + * ixgbe_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure * - * Sets I2C stop condition (Low -> High on SDA while SCL is High) - * Disables bit-bang mode and negates data output enable on X550 - * hardware. + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + * Disables bit-bang mode and negates data output enable on X550 + * hardware. **/ STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw) { @@ -2280,11 +2280,11 @@ STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw) } /** - * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte to clock in + * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in * - * Clocks in one byte data via I2C data/clock + * Clocks in one byte data via I2C data/clock **/ STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) { @@ -2303,11 +2303,11 @@ STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) } /** - * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte clocked out + * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out * - * Clocks out one byte data via I2C data/clock + * Clocks out one byte data via I2C data/clock **/ STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) { @@ -2337,10 +2337,10 @@ STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) } /** - * ixgbe_get_i2c_ack - Polls for I2C ACK - * @hw: pointer to hardware structure + * ixgbe_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure * - * Clocks in/out one bit via I2C data/clock + * Clocks in/out one bit via I2C data/clock **/ STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) { @@ -2389,11 +2389,11 @@ STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) } /** - * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: read data value + * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value * - * Clocks in one bit via I2C data/clock + * Clocks in one bit via I2C data/clock **/ STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) { @@ -2425,11 +2425,11 @@ STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) } /** - * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: data value to write + * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write * - * Clocks out one bit via I2C data/clock + * Clocks out one bit via I2C data/clock **/ STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) { @@ -2461,12 +2461,12 @@ STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) } /** - * ixgbe_raise_i2c_clk - Raises the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register + * ixgbe_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register * - * Raises the I2C clock line '0'->'1' - * Negates the I2C clock output enable on X550 hardware. + * Raises the I2C clock line '0'->'1' + * Negates the I2C clock output enable on X550 hardware. **/ STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { @@ -2497,12 +2497,12 @@ STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) } /** - * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register + * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register * - * Lowers the I2C clock line '1'->'0' - * Asserts the I2C clock output enable on X550 hardware. + * Lowers the I2C clock line '1'->'0' + * Asserts the I2C clock output enable on X550 hardware. **/ STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { @@ -2519,13 +2519,13 @@ STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) } /** - * ixgbe_set_i2c_data - Sets the I2C data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * @data: I2C data value (0 or 1) to set + * ixgbe_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set * - * Sets the I2C data bit - * Asserts the I2C data output enable on X550 hardware. + * Sets the I2C data bit + * Asserts the I2C data output enable on X550 hardware. **/ STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) { @@ -2567,12 +2567,12 @@ STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) } /** - * ixgbe_get_i2c_data - Reads the I2C SDA data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register + * ixgbe_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register * - * Returns the I2C data bit value - * Negates the I2C data output enable on X550 hardware. + * Returns the I2C data bit value + * Negates the I2C data output enable on X550 hardware. **/ STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) { @@ -2597,11 +2597,11 @@ STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) } /** - * ixgbe_i2c_bus_clear - Clears the I2C bus - * @hw: pointer to hardware structure + * ixgbe_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure * - * Clears the I2C bus by sending nine clock pulses. - * Used when data line is stuck low. + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. **/ void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) { @@ -2634,10 +2634,10 @@ void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) } /** - * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. - * @hw: pointer to hardware structure + * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. + * @hw: pointer to hardware structure * - * Checks if the LASI temp alarm status was triggered due to overtemp + * Checks if the LASI temp alarm status was triggered due to overtemp **/ s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) { diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c b/drivers/net/ixgbe/base/ixgbe_vf.c index 4b24846063..2a3e258340 100644 --- a/drivers/net/ixgbe/base/ixgbe_vf.c +++ b/drivers/net/ixgbe/base/ixgbe_vf.c @@ -15,13 +15,13 @@ #endif /** - * ixgbe_init_ops_vf - Initialize the pointers for vf - * @hw: pointer to hardware structure + * ixgbe_init_ops_vf - Initialize the pointers for vf + * @hw: pointer to hardware structure * - * This will assign function pointers, adapter-specific functions can - * override the assignment of generic function pointers by assigning - * their own adapter-specific function pointers. - * Does not touch the hardware. + * This will assign function pointers, adapter-specific functions can + * override the assignment of generic function pointers by assigning + * their own adapter-specific function pointers. + * Does not touch the hardware. **/ s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw) { @@ -63,7 +63,7 @@ s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw) } /* ixgbe_virt_clr_reg - Set register to default (power on) state. - * @hw: pointer to hardware structure + * @hw: pointer to hardware structure */ static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw) { @@ -106,13 +106,13 @@ static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw) } /** - * ixgbe_start_hw_vf - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure + * ixgbe_start_hw_vf - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure * - * Starts the hardware by filling the bus info structure and media type, clears - * all on chip counters, initializes receive address registers, multicast - * table, VLAN filter table, calls routine to set up link and flow control - * settings, and leaves transmit and receive units disabled and uninitialized + * Starts the hardware by filling the bus info structure and media type, clears + * all on chip counters, initializes receive address registers, multicast + * table, VLAN filter table, calls routine to set up link and flow control + * settings, and leaves transmit and receive units disabled and uninitialized **/ s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw) { @@ -123,11 +123,11 @@ s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw) } /** - * ixgbe_init_hw_vf - virtual function hardware initialization - * @hw: pointer to hardware structure + * ixgbe_init_hw_vf - virtual function hardware initialization + * @hw: pointer to hardware structure * - * Initialize the hardware by resetting the hardware and then starting - * the hardware + * Initialize the hardware by resetting the hardware and then starting + * the hardware **/ s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw) { @@ -139,11 +139,11 @@ s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw) } /** - * ixgbe_reset_hw_vf - Performs hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw_vf - Performs hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks and - * clears all interrupts. + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts. **/ s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw) { @@ -211,13 +211,13 @@ s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw) } /** - * ixgbe_stop_adapter_vf - Generic stop Tx/Rx units - * @hw: pointer to hardware structure + * ixgbe_stop_adapter_vf - Generic stop Tx/Rx units + * @hw: pointer to hardware structure * - * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, - * disables transmit and receive units. The adapter_stopped flag is used by - * the shared code and drivers to determine if the adapter is in a stopped - * state and should not touch the hardware. + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. **/ s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw) { @@ -257,16 +257,16 @@ s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw) } /** - * ixgbe_mta_vector - Determines bit-vector in multicast table to set - * @hw: pointer to hardware structure - * @mc_addr: the multicast address + * ixgbe_mta_vector - Determines bit-vector in multicast table to set + * @hw: pointer to hardware structure + * @mc_addr: the multicast address * - * Extracts the 12 bits, from a multicast address, to determine which - * bit-vector to set in the multicast table. The hardware uses 12 bits, from - * incoming rx multicast addresses, to determine the bit-vector to check in - * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set - * by the MO field of the MCSTCTRL. The MO field is set during initialization - * to mc_filter_type. + * Extracts the 12 bits, from a multicast address, to determine which + * bit-vector to set in the multicast table. The hardware uses 12 bits, from + * incoming rx multicast addresses, to determine the bit-vector to check in + * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set + * by the MO field of the MCSTCTRL. The MO field is set during initialization + * to mc_filter_type. **/ STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) { @@ -309,12 +309,12 @@ STATIC s32 ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw, u32 *msg, } /** - * ixgbe_set_rar_vf - set device MAC address - * @hw: pointer to hardware structure - * @index: Receive address register to write - * @addr: Address to put into receive address register - * @vmdq: VMDq "set" or "pool" index - * @enable_addr: set flag that address is active + * ixgbe_set_rar_vf - set device MAC address + * @hw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @vmdq: VMDq "set" or "pool" index + * @enable_addr: set flag that address is active **/ s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, u32 enable_addr) @@ -342,14 +342,14 @@ s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, } /** - * ixgbe_update_mc_addr_list_vf - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * @next: caller supplied function to return next address in list - * @clear: unused + * ixgbe_update_mc_addr_list_vf - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @next: caller supplied function to return next address in list + * @clear: unused * - * Updates the Multicast Table Array. + * Updates the Multicast Table Array. **/ s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list, u32 mc_addr_count, ixgbe_mc_addr_itr next, @@ -391,11 +391,11 @@ s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list, } /** - * ixgbevf_update_xcast_mode - Update Multicast mode - * @hw: pointer to the HW structure - * @xcast_mode: new multicast mode + * ixgbevf_update_xcast_mode - Update Multicast mode + * @hw: pointer to the HW structure + * @xcast_mode: new multicast mode * - * Updates the Multicast Mode of VF. + * Updates the Multicast Mode of VF. **/ s32 ixgbevf_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode) { @@ -428,14 +428,14 @@ s32 ixgbevf_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode) } /** - * ixgbe_set_vfta_vf - Set/Unset vlan filter table address - * @hw: pointer to the HW structure - * @vlan: 12 bit VLAN ID - * @vind: unused by VF drivers - * @vlan_on: if true then set bit, else clear bit - * @vlvf_bypass: boolean flag indicating updating default pool is okay + * ixgbe_set_vfta_vf - Set/Unset vlan filter table address + * @hw: pointer to the HW structure + * @vlan: 12 bit VLAN ID + * @vind: unused by VF drivers + * @vlan_on: if true then set bit, else clear bit + * @vlvf_bypass: boolean flag indicating updating default pool is okay * - * Turn on/off specified VLAN in the VLAN filter table. + * Turn on/off specified VLAN in the VLAN filter table. **/ s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, bool vlvf_bypass) @@ -457,10 +457,10 @@ s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, } /** - * ixgbe_get_num_of_tx_queues_vf - Get number of TX queues - * @hw: pointer to hardware structure + * ixgbe_get_num_of_tx_queues_vf - Get number of TX queues + * @hw: pointer to hardware structure * - * Returns the number of transmit queues for the given adapter. + * Returns the number of transmit queues for the given adapter. **/ u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw) { @@ -469,10 +469,10 @@ u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw) } /** - * ixgbe_get_num_of_rx_queues_vf - Get number of RX queues - * @hw: pointer to hardware structure + * ixgbe_get_num_of_rx_queues_vf - Get number of RX queues + * @hw: pointer to hardware structure * - * Returns the number of receive queues for the given adapter. + * Returns the number of receive queues for the given adapter. **/ u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw) { @@ -526,12 +526,12 @@ s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr) } /** - * ixgbe_setup_mac_link_vf - Setup MAC link settings - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_vf - Setup MAC link settings + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Set the link speed in the AUTOC register and restarts link. + * Set the link speed in the AUTOC register and restarts link. **/ s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete) @@ -541,13 +541,13 @@ s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed, } /** - * ixgbe_check_mac_link_vf - Get link/speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true is link is up, false otherwise - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_check_mac_link_vf - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Reads the links register to determine if link is up and the current speed + * Reads the links register to determine if link is up and the current speed **/ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up, bool autoneg_wait_to_complete) @@ -644,9 +644,9 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed, } /** - * ixgbevf_rlpml_set_vf - Set the maximum receive packet length - * @hw: pointer to the HW structure - * @max_size: value to assign to max frame size + * ixgbevf_rlpml_set_vf - Set the maximum receive packet length + * @hw: pointer to the HW structure + * @max_size: value to assign to max frame size **/ s32 ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size) { @@ -667,9 +667,9 @@ s32 ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size) } /** - * ixgbevf_negotiate_api_version - Negotiate supported API version - * @hw: pointer to the HW structure - * @api: integer containing requested API version + * ixgbevf_negotiate_api_version - Negotiate supported API version + * @hw: pointer to the HW structure + * @api: integer containing requested API version **/ int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api) { diff --git a/drivers/net/ixgbe/base/ixgbe_x540.c b/drivers/net/ixgbe/base/ixgbe_x540.c index d65f47c181..838bfc8b57 100644 --- a/drivers/net/ixgbe/base/ixgbe_x540.c +++ b/drivers/net/ixgbe/base/ixgbe_x540.c @@ -20,11 +20,11 @@ STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); /** - * ixgbe_init_ops_X540 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure + * ixgbe_init_ops_X540 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure * - * Initialize the function pointers and assign the MAC type for X540. - * Does not touch the hardware. + * Initialize the function pointers and assign the MAC type for X540. + * Does not touch the hardware. **/ s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw) { @@ -126,12 +126,12 @@ s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw) } /** - * ixgbe_get_link_capabilities_X540 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: true when autoneg or autotry is enabled + * ixgbe_get_link_capabilities_X540 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled * - * Determines the link capabilities by reading the AUTOC register. + * Determines the link capabilities by reading the AUTOC register. **/ s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -143,10 +143,10 @@ s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw, } /** - * ixgbe_get_media_type_X540 - Get media type - * @hw: pointer to hardware structure + * ixgbe_get_media_type_X540 - Get media type + * @hw: pointer to hardware structure * - * Returns the media type (fiber, copper, backplane) + * Returns the media type (fiber, copper, backplane) **/ enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) { @@ -155,10 +155,10 @@ enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) } /** - * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed **/ s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -169,11 +169,11 @@ s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, } /** - * ixgbe_reset_hw_X540 - Perform hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw_X540 - Perform hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, and perform a reset. + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, and perform a reset. **/ s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) { @@ -271,12 +271,12 @@ s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) } /** - * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure + * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure * - * Starts the hardware using the generic start_hw function - * and the generation start_hw function. - * Then performs revision-specific operations, if any. + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. **/ s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) { @@ -295,10 +295,10 @@ s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) } /** - * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type - * @hw: pointer to hardware structure + * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type + * @hw: pointer to hardware structure * - * Determines physical layer capabilities of the current configuration. + * Determines physical layer capabilities of the current configuration. **/ u64 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) { @@ -320,11 +320,11 @@ u64 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) } /** - * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params - * @hw: pointer to hardware structure + * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params + * @hw: pointer to hardware structure * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. **/ s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) { @@ -352,12 +352,12 @@ s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) } /** - * ixgbe_read_eerd_X540- Read EEPROM word using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM + * ixgbe_read_eerd_X540- Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM * - * Reads a 16 bit word from the EEPROM using the EERD register. + * Reads a 16 bit word from the EEPROM using the EERD register. **/ s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) { @@ -376,13 +376,13 @@ s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) } /** - * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @words: number of words - * @data: word(s) read from the EEPROM + * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM * - * Reads a 16 bit word(s) from the EEPROM using the EERD register. + * Reads a 16 bit word(s) from the EEPROM using the EERD register. **/ s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -403,12 +403,12 @@ s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, } /** - * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM + * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM * - * Write a 16 bit word to the EEPROM using the EEWR register. + * Write a 16 bit word to the EEPROM using the EEWR register. **/ s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) { @@ -427,13 +427,13 @@ s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) } /** - * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @words: number of words - * @data: word(s) write to the EEPROM + * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM * - * Write a 16 bit word(s) to the EEPROM using the EEWR register. + * Write a 16 bit word(s) to the EEPROM using the EEWR register. **/ s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -454,14 +454,14 @@ s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, } /** - * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum + * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum * - * This function does not use synchronization for EERD and EEWR. It can - * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540. + * This function does not use synchronization for EERD and EEWR. It can + * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540. * - * @hw: pointer to hardware structure + * @hw: pointer to hardware structure * - * Returns a negative error code on error, or the 16-bit checksum + * Returns a negative error code on error, or the 16-bit checksum **/ s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) { @@ -532,12 +532,12 @@ s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) } /** - * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum + * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum * - * Performs checksum calculation and validates the EEPROM checksum. If the - * caller does not need checksum_val, the value can be NULL. + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. **/ s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, u16 *checksum_val) @@ -644,11 +644,11 @@ s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw) } /** - * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device - * @hw: pointer to hardware structure + * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure * - * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy - * EEPROM from shadow RAM to the flash device. + * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy + * EEPROM from shadow RAM to the flash device. **/ s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) { @@ -691,11 +691,11 @@ s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) } /** - * ixgbe_poll_flash_update_done_X540 - Poll flash update status - * @hw: pointer to hardware structure + * ixgbe_poll_flash_update_done_X540 - Poll flash update status + * @hw: pointer to hardware structure * - * Polls the FLUDONE (bit 26) of the EEC Register to determine when the - * flash update is done. + * Polls the FLUDONE (bit 26) of the EEC Register to determine when the + * flash update is done. **/ STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) { @@ -722,12 +722,12 @@ STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) } /** - * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire + * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire * - * Acquires the SWFW semaphore thought the SW_FW_SYNC register for - * the specified function (CSR, PHY0, PHY1, NVM, Flash) + * Acquires the SWFW semaphore thought the SW_FW_SYNC register for + * the specified function (CSR, PHY0, PHY1, NVM, Flash) **/ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { @@ -819,12 +819,12 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release + * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release * - * Releases the SWFW semaphore through the SW_FW_SYNC register - * for the specified function (CSR, PHY0, PHY1, EVM, Flash) + * Releases the SWFW semaphore through the SW_FW_SYNC register + * for the specified function (CSR, PHY0, PHY1, EVM, Flash) **/ void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { @@ -846,10 +846,10 @@ void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore - * @hw: pointer to hardware structure + * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure * - * Sets the hardware semaphores so SW/FW can gain control of shared resources + * Sets the hardware semaphores so SW/FW can gain control of shared resources **/ STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) { @@ -904,10 +904,10 @@ STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) } /** - * ixgbe_release_swfw_sync_semaphore - Release hardware semaphore - * @hw: pointer to hardware structure + * ixgbe_release_swfw_sync_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure * - * This function clears hardware semaphore bits. + * This function clears hardware semaphore bits. **/ STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) { @@ -929,11 +929,11 @@ STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) } /** - * ixgbe_init_swfw_sync_X540 - Release hardware semaphore - * @hw: pointer to hardware structure + * ixgbe_init_swfw_sync_X540 - Release hardware semaphore + * @hw: pointer to hardware structure * - * This function reset hardware semaphore bits for a semaphore that may - * have be left locked due to a catastrophic failure. + * This function reset hardware semaphore bits for a semaphore that may + * have be left locked due to a catastrophic failure. **/ void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw) { @@ -964,7 +964,7 @@ void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw) * @index: led number to blink * * Devices that implement the version 2 interface: - * X540 + * X540 **/ s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) { @@ -1005,7 +1005,7 @@ s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) * @index: led number to stop blinking * * Devices that implement the version 2 interface: - * X540 + * X540 **/ s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) { diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index c64cbfab1e..5750f79ebe 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -15,11 +15,11 @@ STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *, u32 mask); STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw); /** - * ixgbe_init_ops_X550 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure + * ixgbe_init_ops_X550 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure * - * Initialize the function pointers and assign the MAC type for X550. - * Does not touch the hardware. + * Initialize the function pointers and assign the MAC type for X550. + * Does not touch the hardware. **/ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) { @@ -718,7 +718,7 @@ static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw) * ixgbe_fc_autoneg_fw _ Set up flow control for FW-controlled PHYs * @hw: pointer to hardware structure * - * Called at init time to set up flow control. + * Called at init time to set up flow control. */ static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw) { @@ -844,11 +844,11 @@ s32 ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw) } /** - * ixgbe_dmac_config_X550 - * @hw: pointer to hardware structure + * ixgbe_dmac_config_X550 + * @hw: pointer to hardware structure * - * Configure DMA coalescing. If enabling dmac, dmac is activated. - * When disabling dmac, dmac enable dmac bit is cleared. + * Configure DMA coalescing. If enabling dmac, dmac is activated. + * When disabling dmac, dmac enable dmac bit is cleared. **/ s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw) { @@ -892,11 +892,11 @@ s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw) } /** - * ixgbe_dmac_config_tcs_X550 - * @hw: pointer to hardware structure + * ixgbe_dmac_config_tcs_X550 + * @hw: pointer to hardware structure * - * Configure DMA coalescing threshold per TC. The dmac enable bit must - * be cleared before configuring. + * Configure DMA coalescing threshold per TC. The dmac enable bit must + * be cleared before configuring. **/ s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw) { @@ -948,10 +948,10 @@ s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw) } /** - * ixgbe_dmac_update_tcs_X550 - * @hw: pointer to hardware structure + * ixgbe_dmac_update_tcs_X550 + * @hw: pointer to hardware structure * - * Disables dmac, updates per TC settings, and then enables dmac. + * Disables dmac, updates per TC settings, and then enables dmac. **/ s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw) { @@ -975,11 +975,11 @@ s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw) } /** - * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params - * @hw: pointer to hardware structure + * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params + * @hw: pointer to hardware structure * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. **/ s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) { @@ -1034,10 +1034,10 @@ void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable, } /** - * ixgbe_set_ethertype_anti_spoofing_X550 - Configure Ethertype anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for Ethertype anti-spoofing - * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing + * ixgbe_set_ethertype_anti_spoofing_X550 - Configure Ethertype anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for Ethertype anti-spoofing + * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing * **/ void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw, @@ -1092,12 +1092,12 @@ STATIC s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl) } /** - * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register - * of the IOSF device - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 3 bit device type - * @data: Data to write to the register + * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register + * of the IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Data to write to the register **/ s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 data) @@ -1139,11 +1139,11 @@ s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 3 bit device type - * @data: Pointer to read data from the register + * ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Pointer to read data from the register **/ s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 *data) @@ -1253,12 +1253,12 @@ s32 ixgbe_put_phy_token(struct ixgbe_hw *hw) } /** - * ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register - * of the IOSF device - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 3 bit device type - * @data: Data to write to the register + * ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register + * of the IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Data to write to the register **/ s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 data) @@ -1284,11 +1284,11 @@ s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 3 bit device type - * @data: Pointer to read data from the register + * ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Pointer to read data from the register **/ s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 *data) @@ -1319,10 +1319,10 @@ s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_disable_mdd_X550 - * @hw: pointer to hardware structure + * ixgbe_disable_mdd_X550 + * @hw: pointer to hardware structure * - * Disable malicious driver detection + * Disable malicious driver detection **/ void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw) { @@ -1342,10 +1342,10 @@ void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw) } /** - * ixgbe_enable_mdd_X550 - * @hw: pointer to hardware structure + * ixgbe_enable_mdd_X550 + * @hw: pointer to hardware structure * - * Enable malicious driver detection + * Enable malicious driver detection **/ void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw) { @@ -1365,11 +1365,11 @@ void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw) } /** - * ixgbe_restore_mdd_vf_X550 - * @hw: pointer to hardware structure - * @vf: vf index + * ixgbe_restore_mdd_vf_X550 + * @hw: pointer to hardware structure + * @vf: vf index * - * Restore VF that was disabled during malicious driver detection event + * Restore VF that was disabled during malicious driver detection event **/ void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf) { @@ -1405,11 +1405,11 @@ void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf) } /** - * ixgbe_mdd_event_X550 - * @hw: pointer to hardware structure - * @vf_bitmap: vf bitmap of malicious vfs + * ixgbe_mdd_event_X550 + * @hw: pointer to hardware structure + * @vf_bitmap: vf bitmap of malicious vfs * - * Handle malicious driver detection event. + * Handle malicious driver detection event. **/ void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap) { @@ -1462,10 +1462,10 @@ void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap) } /** - * ixgbe_get_media_type_X550em - Get media type - * @hw: pointer to hardware structure + * ixgbe_get_media_type_X550em - Get media type + * @hw: pointer to hardware structure * - * Returns the media type (fiber, copper, backplane) + * Returns the media type (fiber, copper, backplane) */ enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) { @@ -1511,9 +1511,9 @@ enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) } /** - * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported - * @hw: pointer to hardware structure - * @linear: true if SFP module is linear + * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported + * @hw: pointer to hardware structure + * @linear: true if SFP module is linear */ STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) { @@ -1549,10 +1549,10 @@ STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) } /** - * ixgbe_identify_sfp_module_X550em - Identifies SFP modules - * @hw: pointer to hardware structure + * ixgbe_identify_sfp_module_X550em - Identifies SFP modules + * @hw: pointer to hardware structure * - * Searches for and identifies the SFP module and assigns appropriate PHY type. + * Searches for and identifies the SFP module and assigns appropriate PHY type. **/ s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw) { @@ -1573,8 +1573,8 @@ s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw) } /** - * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops - * @hw: pointer to hardware structure + * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops + * @hw: pointer to hardware structure */ s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) { @@ -1787,8 +1787,8 @@ STATIC s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed, } /** - * ixgbe_init_mac_link_ops_X550em - init mac link function pointers - * @hw: pointer to hardware structure + * ixgbe_init_mac_link_ops_X550em - init mac link function pointers + * @hw: pointer to hardware structure */ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) { @@ -1849,10 +1849,10 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) } /** - * ixgbe_get_link_capabilities_x550em - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: true when autoneg or autotry is enabled + * ixgbe_get_link_capabilities_x550em - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled */ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -1941,7 +1941,7 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause * @hw: pointer to hardware structure * @lsc: pointer to boolean flag which indicates whether external Base T - * PHY interrupt is lsc + * PHY interrupt is lsc * * Determime if external Base T PHY interrupt cause is high temperature * failure alarm or link status change. @@ -2127,11 +2127,11 @@ STATIC s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) } /** - * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed. - * @hw: pointer to hardware structure - * @speed: link speed + * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed. + * @hw: pointer to hardware structure + * @speed: link speed * - * Configures the integrated KR PHY. + * Configures the integrated KR PHY. **/ STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, ixgbe_link_speed speed) @@ -2229,11 +2229,11 @@ static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) } /** - * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register - * @hw: pointer to hardware structure + * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register + * @hw: pointer to hardware structure * - * Read NW_MNG_IF_SEL register and save field values, and check for valid field - * values. + * Read NW_MNG_IF_SEL register and save field values, and check for valid field + * values. **/ STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) { @@ -2256,12 +2256,12 @@ STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) } /** - * ixgbe_init_phy_ops_X550em - PHY/SFP specific init - * @hw: pointer to hardware structure + * ixgbe_init_phy_ops_X550em - PHY/SFP specific init + * @hw: pointer to hardware structure * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. */ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) { @@ -2378,7 +2378,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) /** * ixgbe_set_mdio_speed - Set MDIO clock speed - * @hw: pointer to hardware structure + * @hw: pointer to hardware structure */ STATIC void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) { @@ -2409,12 +2409,12 @@ STATIC void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) } /** - * ixgbe_reset_hw_X550em - Perform hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw_X550em - Perform hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, perform a PHY reset, and perform a link (MAC) - * reset. + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. */ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) { @@ -2589,8 +2589,8 @@ s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) } /** - * ixgbe_setup_kr_x550em - Configure the KR PHY. - * @hw: pointer to hardware structure + * ixgbe_setup_kr_x550em - Configure the KR PHY. + * @hw: pointer to hardware structure **/ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) { @@ -2605,12 +2605,12 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) } /** - * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: unused + * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: unused * - * Configure the external PHY and the integrated KR PHY for SFP support. + * Configure the external PHY and the integrated KR PHY for SFP support. **/ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -2650,12 +2650,12 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, } /** - * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode - * @hw: pointer to hardware structure - * @speed: the link speed to force + * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode + * @hw: pointer to hardware structure + * @speed: the link speed to force * - * Configures the integrated PHY for native SFI mode. Used to connect the - * internal PHY directly to an SFP cage, without autonegotiation. + * Configures the integrated PHY for native SFI mode. Used to connect the + * internal PHY directly to an SFP cage, without autonegotiation. **/ STATIC s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) { @@ -2699,12 +2699,12 @@ STATIC s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) } /** - * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: unused + * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: unused * - * Configure the integrated PHY for SFP support. + * Configure the integrated PHY for SFP support. **/ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -2804,10 +2804,10 @@ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, } /** - * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration - * @hw: pointer to hardware structure + * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration + * @hw: pointer to hardware structure * - * iXfI configuration needed for ixgbe_mac_X550EM_x devices. + * iXfI configuration needed for ixgbe_mac_X550EM_x devices. **/ STATIC s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) { @@ -2873,12 +2873,12 @@ STATIC s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) } /** - * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. - * @hw: pointer to hardware structure - * @speed: the link speed to force + * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * @hw: pointer to hardware structure + * @speed: the link speed to force * - * Configures the integrated KR PHY to use iXFI mode. Used to connect an - * internal and external PHY at a specific speed, without autonegotiation. + * Configures the integrated KR PHY to use iXFI mode. Used to connect an + * internal and external PHY at a specific speed, without autonegotiation. **/ STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) { @@ -3034,10 +3034,10 @@ s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) } /** - * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback. - * @hw: pointer to hardware structure + * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback. + * @hw: pointer to hardware structure * - * Configures the integrated KR PHY to use internal loopback mode. + * Configures the integrated KR PHY to use internal loopback mode. **/ s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw) { @@ -3101,13 +3101,13 @@ s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw) } /** - * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command - * assuming that the semaphore is already obtained. - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM + * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command + * assuming that the semaphore is already obtained. + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM * - * Reads a 16 bit word from the EEPROM using the hostif. + * Reads a 16 bit word from the EEPROM using the hostif. **/ s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) { @@ -3144,13 +3144,13 @@ s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) } /** - * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @words: number of words - * @data: word(s) read from the EEPROM + * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM * - * Reads a 16 bit word(s) from the EEPROM using the hostif. + * Reads a 16 bit word(s) from the EEPROM using the hostif. **/ s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -3219,12 +3219,12 @@ s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, } /** - * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM + * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM * - * Write a 16 bit word to the EEPROM using the hostif. + * Write a 16 bit word to the EEPROM using the hostif. **/ s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 data) @@ -3252,12 +3252,12 @@ s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM + * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM * - * Write a 16 bit word to the EEPROM using the hostif. + * Write a 16 bit word to the EEPROM using the hostif. **/ s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data) @@ -3279,13 +3279,13 @@ s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, } /** - * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @words: number of words - * @data: word(s) write to the EEPROM + * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM * - * Write a 16 bit word(s) to the EEPROM using the hostif. + * Write a 16 bit word(s) to the EEPROM using the hostif. **/ s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) @@ -3391,12 +3391,12 @@ STATIC s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr, } /** - * ixgbe_calc_checksum_X550 - Calculates and returns the checksum - * @hw: pointer to hardware structure - * @buffer: pointer to buffer containing calculated checksum - * @buffer_size: size of buffer + * ixgbe_calc_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure + * @buffer: pointer to buffer containing calculated checksum + * @buffer_size: size of buffer * - * Returns a negative error code on error, or the 16-bit checksum + * Returns a negative error code on error, or the 16-bit checksum **/ s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size) { @@ -3474,10 +3474,10 @@ s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size) } /** - * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum - * @hw: pointer to hardware structure + * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure * - * Returns a negative error code on error, or the 16-bit checksum + * Returns a negative error code on error, or the 16-bit checksum **/ s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) { @@ -3485,12 +3485,12 @@ s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) } /** - * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum + * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum * - * Performs checksum calculation and validates the EEPROM checksum. If the - * caller does not need checksum_val, the value can be NULL. + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. **/ s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val) { @@ -3579,10 +3579,10 @@ s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw) } /** - * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device - * @hw: pointer to hardware structure + * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure * - * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. + * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. **/ s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) { @@ -3604,10 +3604,10 @@ s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) } /** - * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type - * @hw: pointer to hardware structure + * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type + * @hw: pointer to hardware structure * - * Determines physical layer capabilities of the current configuration. + * Determines physical layer capabilities of the current configuration. **/ u64 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw) { @@ -3748,7 +3748,7 @@ void ixgbe_disable_rx_x550(struct ixgbe_hw *hw) /** * ixgbe_enter_lplu_x550em - Transition to low power states - * @hw: pointer to hardware structure + * @hw: pointer to hardware structure * * Configures Low Power Link Up on transition to low power states * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the @@ -3856,8 +3856,8 @@ s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) /** * ixgbe_get_lcd_x550em - Determine lowest common denominator - * @hw: pointer to hardware structure - * @lcd_speed: pointer to lowest common link speed + * @hw: pointer to hardware structure + * @lcd_speed: pointer to lowest common link speed * * Determine lowest common link speed with link partner. **/ @@ -3893,10 +3893,10 @@ s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed) } /** - * ixgbe_setup_fc_X550em - Set up flow control - * @hw: pointer to hardware structure + * ixgbe_setup_fc_X550em - Set up flow control + * @hw: pointer to hardware structure * - * Called at init time to set up flow control. + * Called at init time to set up flow control. **/ s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw) { @@ -3983,10 +3983,10 @@ s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw) } /** - * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure * - * Enable flow control according to IEEE clause 37. + * Enable flow control according to IEEE clause 37. **/ void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw) { @@ -4061,8 +4061,8 @@ void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw) } /** - * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings + * @hw: pointer to hardware structure * **/ void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw) @@ -4072,10 +4072,10 @@ void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw) } /** - * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure * - * Enable flow control according to IEEE clause 37. + * Enable flow control according to IEEE clause 37. **/ void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw) { @@ -4127,10 +4127,10 @@ void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw) } /** - * ixgbe_setup_fc_backplane_x550em_a - Set up flow control - * @hw: pointer to hardware structure + * ixgbe_setup_fc_backplane_x550em_a - Set up flow control + * @hw: pointer to hardware structure * - * Called at init time to set up flow control. + * Called at init time to set up flow control. **/ s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw) { @@ -4235,11 +4235,11 @@ STATIC void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) } /** - * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire + * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire * - * Acquires the SWFW semaphore and sets the I2C MUX + * Acquires the SWFW semaphore and sets the I2C MUX **/ s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) { @@ -4258,11 +4258,11 @@ s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release + * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release * - * Releases the SWFW semaphore and sets the I2C MUX + * Releases the SWFW semaphore and sets the I2C MUX **/ void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) { @@ -4275,11 +4275,11 @@ void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire + * ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire * - * Acquires the SWFW semaphore and get the shared phy token as needed + * Acquires the SWFW semaphore and get the shared phy token as needed */ STATIC s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) { @@ -4325,11 +4325,11 @@ STATIC s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_release_swfw_sync_X550a - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release + * ixgbe_release_swfw_sync_X550a - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release * - * Releases the SWFW semaphore and puts the shared phy token as needed + * Releases the SWFW semaphore and puts the shared phy token as needed */ STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) { @@ -4345,15 +4345,15 @@ STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) } /** - * ixgbe_read_phy_reg_x550a - Reads specified PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @device_type: 5 bit device type - * @phy_data: Pointer to read data from PHY register + * ixgbe_read_phy_reg_x550a - Reads specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type + * @phy_data: Pointer to read data from PHY register * - * Reads a value from a specified PHY register using the SWFW lock and PHY - * Token. The PHY Token is needed since the MDIO is shared between to MAC - * instances. + * Reads a value from a specified PHY register using the SWFW lock and PHY + * Token. The PHY Token is needed since the MDIO is shared between to MAC + * instances. **/ s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) @@ -4374,14 +4374,14 @@ s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, } /** - * ixgbe_write_phy_reg_x550a - Writes specified PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 5 bit device type - * @phy_data: Data to write to the PHY register + * ixgbe_write_phy_reg_x550a - Writes specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register * - * Writes a value to specified PHY register using the SWFW lock and PHY Token. - * The PHY Token is needed since the MDIO is shared between to MAC instances. + * Writes a value to specified PHY register using the SWFW lock and PHY Token. + * The PHY Token is needed since the MDIO is shared between to MAC instances. **/ s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) @@ -4532,8 +4532,8 @@ s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed, } /** - * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI - * @hw: pointer to hardware structure + * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI + * @hw: pointer to hardware structure **/ s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) { @@ -4549,9 +4549,9 @@ s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) } /** - * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs. - * @hw: pointer to hardware structure - * @led_idx: led number to turn on + * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs. + * @hw: pointer to hardware structure + * @led_idx: led number to turn on **/ s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx) { @@ -4574,9 +4574,9 @@ s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx) } /** - * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs. - * @hw: pointer to hardware structure - * @led_idx: led number to turn off + * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @led_idx: led number to turn off **/ s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx) { @@ -4599,19 +4599,19 @@ s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx) } /** - * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware - * @hw: pointer to the HW structure - * @maj: driver version major number - * @min: driver version minor number - * @build: driver version build number - * @sub: driver version sub build number - * @len: length of driver_ver string - * @driver_ver: driver string + * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware + * @hw: pointer to the HW structure + * @maj: driver version major number + * @min: driver version minor number + * @build: driver version build number + * @sub: driver version sub build number + * @len: length of driver_ver string + * @driver_ver: driver string * - * Sends driver version number to firmware through the manageability - * block. On success return IXGBE_SUCCESS - * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + * Sends driver version number to firmware through the manageability + * block. On success return IXGBE_SUCCESS + * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. **/ s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, u8 sub, u16 len, const char *driver_ver)