d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

net/mlx5: add option to configure FCS or decapsulation

Browse Source 
There are some limitations on some NICs (at least on ConnectX-6 Dx
and BlueField 2) with supporting FCS (frame checksum) scattering for
the tunnel decapsulated packets.

For the case only one of the features can be supported in the same time,
and the new devarg "decap_en" is introduced to provide the choice to the
users.

If FCS scattering feature is not supposed to be engaged by application,
this new devarg should be specified as "decap_en=0", forcing the FCS
feature enable and rejecting tunnel decap actions in the rte_flow engine.
If FCS scatter is not needed and application supposes to use tunnel
decapsulation in rte_flow, the devarg can be omitted or set to non-zero
value (this is default settings).

Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit is contained in:
Suanming Mou 2020-07-15 21:10:21 +08:00 committed by Ferruh Yigit
parent 91f7338e97
commit 50f95b23c9
5 changed files with 30 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
doc/guides/nics/mlx5.rst
View File

@ -929,6 +929,15 @@ Driver options
By default, the PMD will set this value to 0.
- ``decap_en`` parameter [int]
Some devices do not support FCS (frame checksum) scattering for
tunnel-decapsulated packets.
If set to 0, this option forces the FCS feature and rejects tunnel
decapsulation in the flow engine for such devices.
By default, the PMD will set this value to 1.
.. _mlx5_firmware_config:
Firmware configuration

12
drivers/net/mlx5/linux/mlx5_os.c
View File

@ -776,8 +776,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
(config.hw_vlan_strip ? "" : "not "));
config.hw_fcs_strip = !!(sh->device_attr.raw_packet_caps &
IBV_RAW_PACKET_CAP_SCATTER_FCS);
DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
(config.hw_fcs_strip ? "" : "not "));
#if defined(HAVE_IBV_WQ_FLAG_RX_END_PADDING)
hw_padding = !!sh->device_attr.rx_pad_end_addr_align;
#elif defined(HAVE_IBV_WQ_FLAGS_PCI_WRITE_END_PADDING)
@ -959,6 +957,15 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
config.rt_timestamp = 1;
}
}
/*
* If HW has bug working with tunnel packet decapsulation and
* scatter FCS, and decapsulation is needed, clear the hw_fcs_strip
* bit. Then DEV_RX_OFFLOAD_KEEP_CRC bit will not be set anymore.
*/
if (config.hca_attr.scatter_fcs_w_decap_disable && config.decap_en)
config.hw_fcs_strip = 0;
DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
(config.hw_fcs_strip ? "" : "not "));
if (config.mprq.enabled && mprq) {
if (config.mprq.stride_num_n &&
(config.mprq.stride_num_n > mprq_max_stride_num_n ||
@ -1732,6 +1739,7 @@ mlx5_os_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
},
.dv_esw_en = 1,
.dv_flow_en = 1,
.decap_en = 1,
.log_hp_size = MLX5_ARG_UNSET,
};
/* Device specific configuration. */

5
drivers/net/mlx5/mlx5.c
View File

@ -183,6 +183,8 @@
/* The default memory allocator used in PMD. */
#define MLX5_SYS_MEM_EN "sys_mem_en"
/* Decap will be used or not. */
#define MLX5_DECAP_EN "decap_en"
static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
@ -1544,6 +1546,8 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
config->reclaim_mode = tmp;
} else if (strcmp(MLX5_SYS_MEM_EN, key) == 0) {
config->sys_mem_en = !!tmp;
} else if (strcmp(MLX5_DECAP_EN, key) == 0) {
config->decap_en = !!tmp;
} else {
DRV_LOG(WARNING, "%s: unknown parameter", key);
rte_errno = EINVAL;
@ -1603,6 +1607,7 @@ mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
MLX5_HP_BUF_SIZE,
MLX5_RECLAIM_MEM,
MLX5_SYS_MEM_EN,
MLX5_DECAP_EN,
NULL,
};
struct rte_kvargs *kvlist;

1
drivers/net/mlx5/mlx5.h
View File

@ -218,6 +218,7 @@ struct mlx5_dev_config {
unsigned int reclaim_mode:2; /* Memory reclaim mode. */
unsigned int rt_timestamp:1; /* realtime timestamp format. */
unsigned int sys_mem_en:1; /* The default memory allocator. */
unsigned int decap_en:1; /* Whether decap will be used or not. */
struct {
unsigned int enabled:1; /* Whether MPRQ is enabled. */
unsigned int stride_num_n; /* Number of strides. */

5
drivers/net/mlx5/mlx5_flow_dv.c
View File

@ -2429,6 +2429,11 @@ flow_dv_validate_action_decap(struct rte_eth_dev *dev,
{
const struct mlx5_priv *priv = dev->data->dev_private;
if (priv->config.hca_attr.scatter_fcs_w_decap_disable &&
!priv->config.decap_en)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"decap is not enabled");
if (action_flags & MLX5_FLOW_XCAP_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,