net/ixgbe: move set VF functions from the ethdev

Move the following functions from eth_dev_ops to the ixgbe PMD and rename:

ixgbe_set_pool_rx_mode
ixgbe_set_pool_rx
ixgbe_set_pool_tx
ixgbe_set_pool_vlan_filter
ixgbe_set_vf_rate_limit

Rename the functions to the following:

rte_pmd_ixgbe_set_vf_rxmode
rte_pmd_ixgbe_set_vf_rx
rte_pmd_ixgbe_set_vf_tx
rte_pmd_ixgbe_set_vf_vlan_filter
rte_pmd_ixgbe_set_vf_rate_limit

Use public function internally

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This commit is contained in:
Bernard Iremonger 2016-12-13 11:40:35 +00:00 committed by Ferruh Yigit
parent 7bb4b07057
commit 57aa1fd284
3 changed files with 380 additions and 5 deletions

View File

@ -2348,7 +2348,8 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
for (vf = 0; vf < pci_dev->max_vfs; vf++)
for (idx = 0; idx < IXGBE_MAX_QUEUE_NUM_PER_VF; idx++)
if (vfinfo[vf].tx_rate[idx] != 0)
ixgbe_set_vf_rate_limit(dev, vf,
rte_pmd_ixgbe_set_vf_rate_limit(
dev->data->port_id, vf,
vfinfo[vf].tx_rate[idx],
1 << idx);
}
@ -5072,6 +5073,271 @@ rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on)
return 0;
}
int
rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on)
{
int val = 0;
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
struct ixgbe_hw *hw;
uint32_t vmolr;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
dev = &rte_eth_devices[port];
rte_eth_dev_info_get(port, &dev_info);
if (strstr(dev_info.driver_name, "ixgbe_vf"))
return -ENOTSUP;
if (vf >= dev_info.max_vfs)
return -EINVAL;
if (on > 1)
return -EINVAL;
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
if (hw->mac.type == ixgbe_mac_82598EB) {
PMD_INIT_LOG(ERR, "setting VF receive mode set should be done"
" on 82599 hardware and newer");
return -ENOTSUP;
}
if (ixgbe_vmdq_mode_check(hw) < 0)
return -ENOTSUP;
val = ixgbe_convert_vm_rx_mask_to_val(rx_mask, val);
if (on)
vmolr |= val;
else
vmolr &= ~val;
IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
return 0;
}
int
rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on)
{
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
uint32_t reg, addr;
uint32_t val;
const uint8_t bit1 = 0x1;
struct ixgbe_hw *hw;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
dev = &rte_eth_devices[port];
rte_eth_dev_info_get(port, &dev_info);
if (strstr(dev_info.driver_name, "ixgbe_vf"))
return -ENOTSUP;
if (vf >= dev_info.max_vfs)
return -EINVAL;
if (on > 1)
return -EINVAL;
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (ixgbe_vmdq_mode_check(hw) < 0)
return -ENOTSUP;
/* for vf >= 32, set bit in PFVFRE[1], otherwise PFVFRE[0] */
if (vf >= 32) {
addr = IXGBE_VFRE(1);
val = bit1 << (vf - 32);
} else {
addr = IXGBE_VFRE(0);
val = bit1 << vf;
}
reg = IXGBE_READ_REG(hw, addr);
if (on)
reg |= val;
else
reg &= ~val;
IXGBE_WRITE_REG(hw, addr, reg);
return 0;
}
int
rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on)
{
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
uint32_t reg, addr;
uint32_t val;
const uint8_t bit1 = 0x1;
struct ixgbe_hw *hw;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
dev = &rte_eth_devices[port];
rte_eth_dev_info_get(port, &dev_info);
if (strstr(dev_info.driver_name, "ixgbe_vf"))
return -ENOTSUP;
if (vf >= dev_info.max_vfs)
return -EINVAL;
if (on > 1)
return -EINVAL;
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (ixgbe_vmdq_mode_check(hw) < 0)
return -ENOTSUP;
/* for vf >= 32, set bit in PFVFTE[1], otherwise PFVFTE[0] */
if (vf >= 32) {
addr = IXGBE_VFTE(1);
val = bit1 << (vf - 32);
} else {
addr = IXGBE_VFTE(0);
val = bit1 << vf;
}
reg = IXGBE_READ_REG(hw, addr);
if (on)
reg |= val;
else
reg &= ~val;
IXGBE_WRITE_REG(hw, addr, reg);
return 0;
}
int
rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan,
uint64_t vf_mask, uint8_t vlan_on)
{
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
int ret = 0;
uint16_t vf_idx;
struct ixgbe_hw *hw;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
dev = &rte_eth_devices[port];
rte_eth_dev_info_get(port, &dev_info);
if (strstr(dev_info.driver_name, "ixgbe_vf"))
return -ENOTSUP;
if ((vlan > ETHER_MAX_VLAN_ID) || (vf_mask == 0))
return -EINVAL;
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (ixgbe_vmdq_mode_check(hw) < 0)
return -ENOTSUP;
for (vf_idx = 0; vf_idx < 64; vf_idx++) {
if (vf_mask & ((uint64_t)(1ULL << vf_idx))) {
ret = hw->mac.ops.set_vfta(hw, vlan, vf_idx,
vlan_on, false);
if (ret < 0)
return ret;
}
}
return ret;
}
int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf,
uint16_t tx_rate, uint64_t q_msk)
{
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
struct ixgbe_hw *hw;
struct ixgbe_vf_info *vfinfo;
struct rte_eth_link link;
uint8_t nb_q_per_pool;
uint32_t queue_stride;
uint32_t queue_idx, idx = 0, vf_idx;
uint32_t queue_end;
uint16_t total_rate = 0;
struct rte_pci_device *pci_dev;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
dev = &rte_eth_devices[port];
rte_eth_dev_info_get(port, &dev_info);
rte_eth_link_get_nowait(port, &link);
if (strstr(dev_info.driver_name, "ixgbe_vf"))
return -ENOTSUP;
if (vf >= dev_info.max_vfs)
return -EINVAL;
if (tx_rate > link.link_speed)
return -EINVAL;
if (q_msk == 0)
return 0;
pci_dev = IXGBE_DEV_TO_PCI(dev);
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
vfinfo = *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
queue_stride = IXGBE_MAX_RX_QUEUE_NUM / RTE_ETH_DEV_SRIOV(dev).active;
queue_idx = vf * queue_stride;
queue_end = queue_idx + nb_q_per_pool - 1;
if (queue_end >= hw->mac.max_tx_queues)
return -EINVAL;
if (vfinfo) {
for (vf_idx = 0; vf_idx < pci_dev->max_vfs; vf_idx++) {
if (vf_idx == vf)
continue;
for (idx = 0; idx < RTE_DIM(vfinfo[vf_idx].tx_rate);
idx++)
total_rate += vfinfo[vf_idx].tx_rate[idx];
}
} else {
return -EINVAL;
}
/* Store tx_rate for this vf. */
for (idx = 0; idx < nb_q_per_pool; idx++) {
if (((uint64_t)0x1 << idx) & q_msk) {
if (vfinfo[vf].tx_rate[idx] != tx_rate)
vfinfo[vf].tx_rate[idx] = tx_rate;
total_rate += tx_rate;
}
}
if (total_rate > dev->data->dev_link.link_speed) {
/* Reset stored TX rate of the VF if it causes exceed
* link speed.
*/
memset(vfinfo[vf].tx_rate, 0, sizeof(vfinfo[vf].tx_rate));
return -EINVAL;
}
/* Set RTTBCNRC of each queue/pool for vf X */
for (; queue_idx <= queue_end; queue_idx++) {
if (0x1 & q_msk)
ixgbe_set_queue_rate_limit(dev, queue_idx, tx_rate);
q_msk = q_msk >> 1;
}
return 0;
}
#define IXGBE_MRCTL_VPME 0x01 /* Virtual Pool Mirroring. */
#define IXGBE_MRCTL_UPME 0x02 /* Uplink Port Mirroring. */
#define IXGBE_MRCTL_DPME 0x04 /* Downlink Port Mirroring. */

View File

@ -282,6 +282,110 @@ int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an,
int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an,
uint32_t pn, uint8_t *key);
/**
* Set RX L2 Filtering mode of a VF of an Ethernet device.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param rx_mode
* The RX mode mask, which is one or more of accepting Untagged Packets,
* packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
* in rx_mode.
* @param on
* 1 - Enable a VF RX mode.
* 0 - Disable a VF RX mode.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on);
/**
* Enable or disable a VF traffic receive of an Ethernet device.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param on
* 1 - Enable a VF traffic receive.
* 0 - Disable a VF traffic receive.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable or disable a VF traffic transmit of the Ethernet device.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param on
* 1 - Enable a VF traffic transmit.
* 0 - Disable a VF traffic transmit.
* @return
* - (0) if successful.
* - (-ENODEV) if *port_id* invalid.
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
* received VLAN packets tagged with a given VLAN Tag Identifier.
*
* @param port id
* The port identifier of the Ethernet device.
* @param vlan_id
* The VLAN Tag Identifier whose filtering must be enabled or disabled.
* @param vf_mask
* Bitmap listing which VFs participate in the VLAN filtering.
* @param vlan_on
* 1 - Enable VFs VLAN filtering.
* 0 - Disable VFs VLAN filtering.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on);
/**
* Set the rate limitation for a vf on an Ethernet device.
*
* @param port_id
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param tx_rate
* The tx rate allocated from the total link speed for this VF id.
* @param q_msk
* The queue mask which need to set the rate.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk);
/**
* Response sent back to ixgbe driver from user app after callback
*/

View File

@ -19,10 +19,15 @@ DPDK_16.11 {
DPDK_17.02 {
global:
rte_pmd_ixgbe_macsec_enable;
rte_pmd_ixgbe_macsec_disable;
rte_pmd_ixgbe_macsec_config_txsc;
rte_pmd_ixgbe_macsec_config_rxsc;
rte_pmd_ixgbe_macsec_select_txsa;
rte_pmd_ixgbe_macsec_config_txsc;
rte_pmd_ixgbe_macsec_disable;
rte_pmd_ixgbe_macsec_enable;
rte_pmd_ixgbe_macsec_select_rxsa;
rte_pmd_ixgbe_macsec_select_txsa;
rte_pmd_ixgbe_set_vf_rate_limit;
rte_pmd_ixgbe_set_vf_rx;
rte_pmd_ixgbe_set_vf_rxmode;
rte_pmd_ixgbe_set_vf_tx;
rte_pmd_ixgbe_set_vf_vlan_filter;
} DPDK_16.11;