From 6d7d651bbc157bc5a66158dca4a120df96e2b3c8 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Tue, 17 May 2022 01:04:39 +0530 Subject: [PATCH] net/cxgbe: read firmware configuration file from filesystem Add support to read firmware configuration file from /lib/firmware/cxgb4/ path in the filesystem. The firmware config file is used to enable or disable NIC features before firmware initialization to help retrieve better debug data to analyze firmware init failures. The config file can also be used to redistribute resources, like queues, TCAMs, etc., from disabled physical functions (PFs) to main PF, before firmware init. Signed-off-by: Rahul Lakkireddy --- doc/guides/nics/cxgbe.rst | 48 ++++ drivers/net/cxgbe/base/t4fw_interface.h | 1 + drivers/net/cxgbe/cxgbe_main.c | 329 ++++++++++++++++-------- 3 files changed, 265 insertions(+), 113 deletions(-) diff --git a/doc/guides/nics/cxgbe.rst b/doc/guides/nics/cxgbe.rst index a1d30c488b..6d20384b70 100644 --- a/doc/guides/nics/cxgbe.rst +++ b/doc/guides/nics/cxgbe.rst @@ -838,3 +838,51 @@ to configure the mtu of all the ports with a single command. testpmd> port stop all testpmd> port config all max-pkt-len 9000 + +Hardware Configuration and Debugging +------------------------------------ + +Firmware Configuration File +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To enable or disable Chelsio NIC features before firmware initialization, +the Chelsio firmware configuration file can be placed in following +directory. + +.. code-block:: console + + # For Chelsio T5 NIC series + cp /t5-config.txt /lib/firmware/cxgb4/t5-config.txt + + # For Chelsio T6 NIC series + cp /t6-config.txt /lib/firmware/cxgb4/t6-config.txt + +The firmware configuration file is mainly intended to be used to debug +firmware initialization failures. It can also be used to redistribute +NIC resources from disabled physical functions (PFs) to main PF before +initializing firmware. + +The CXGBE PMD will search and pick up the firmware configuration file +during the Chelsio NIC probe, in following order. + +#. If the firmware configuration file is present in /lib/firmware/cxgb4/ + directory, then this file is downloaded to temporary location in + NIC's on-chip RAM. When firmware is initializing, it picks up the + file from the temporary on-chip RAM location. + +#. Otherwise, if the firmware configuration file has been written + onto the NIC persistent flash area using cxgbtool, then this + file is picked up from the persistent flash area during + firmware initialization. + +#. If no firmware configuration file is found at /lib/firmware/cxgb4/ + directory or on the NIC persistent flash area, then the firmware + will initialize with the default configuration file embedded inside + the firmware binary. + +.. warning:: + + Note that the Chelsio firmware configuration file contains very low + level details that is specific to the Chelsio NIC. Hence, the + firmware configuration file must not be modified without expert + guidance from Chelsio support team. diff --git a/drivers/net/cxgbe/base/t4fw_interface.h b/drivers/net/cxgbe/base/t4fw_interface.h index a0a9292c0c..76f58d7c77 100644 --- a/drivers/net/cxgbe/base/t4fw_interface.h +++ b/drivers/net/cxgbe/base/t4fw_interface.h @@ -697,6 +697,7 @@ enum fw_params_param_dev { */ FW_PARAMS_PARAM_DEV_FWREV = 0x0B, /* fw version */ FW_PARAMS_PARAM_DEV_TPREV = 0x0C, /* tp version */ + FW_PARAMS_PARAM_DEV_CF = 0x0D, FW_PARAMS_PARAM_DEV_ULPTX_MEMWRITE_DSGL = 0x17, FW_PARAMS_PARAM_DEV_FILTER2_WR = 0x1D, FW_PARAMS_PARAM_DEV_OPAQUE_VIID_SMT_EXTN = 0x27, diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c index e2a2ccb781..7b162af3e7 100644 --- a/drivers/net/cxgbe/cxgbe_main.c +++ b/drivers/net/cxgbe/cxgbe_main.c @@ -4,6 +4,7 @@ */ #include +#include #include #include #include @@ -11,6 +12,7 @@ #include #include #include +#include #include #include @@ -1006,6 +1008,218 @@ static int configure_filter_mode_mask(struct adapter *adap) params, val); } +#define CXGBE_FW_CONFIG_PATH_T5 "/lib/firmware/cxgb4/t5-config.txt" +#define CXGBE_FW_CONFIG_PATH_T6 "/lib/firmware/cxgb4/t6-config.txt" + +/* + * Load firmware configuration from file in /lib/firmware/cxgb4/ path, + * if it is present. + */ +static int cxgbe_load_fw_config_from_filesystem(struct adapter *adap, + const char **config_name, + u32 *mem_type, u32 *mem_addr) +{ + u32 param, val, mtype, maddr; + const char *fw_cfg_path; + char *fw_cfg = NULL; + struct stat st; + int ret, fd; + + switch (CHELSIO_CHIP_VERSION(adap->params.chip)) { + case CHELSIO_T5: + fw_cfg_path = CXGBE_FW_CONFIG_PATH_T5; + break; + case CHELSIO_T6: + fw_cfg_path = CXGBE_FW_CONFIG_PATH_T6; + break; + default: + return -ENOENT; + } + + ret = open(fw_cfg_path, O_RDONLY); + if (ret < 0) { + dev_debug(adap, "Couldn't open FW config file\n"); + return ret; + } + + fd = ret; + + ret = fstat(fd, &st); + if (ret < 0) { + dev_debug(adap, "Couldn't get FW config file size\n"); + goto out_err; + } + + if (st.st_size >= FLASH_CFG_MAX_SIZE) { + dev_debug(adap, "FW config file size >= max(%u)\n", + FLASH_CFG_MAX_SIZE); + ret = -ENOMEM; + goto out_err; + } + + fw_cfg = rte_zmalloc(NULL, st.st_size, 0); + if (fw_cfg == NULL) { + ret = -ENOMEM; + goto out_err; + } + + if (read(fd, fw_cfg, st.st_size) != st.st_size) { + dev_debug(adap, "Couldn't read FW config file data\n"); + ret = -EIO; + goto out_err; + } + + close(fd); + + /* Send it to FW to verify and update to new configuration */ + param = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF); + ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); + if (ret < 0) { + dev_debug(adap, "FW config param query failed: %d\n", ret); + goto out_free; + } + + mtype = val >> 8; + maddr = (val & 0xff) << 16; + + t4_os_lock(&adap->win0_lock); + ret = t4_memory_rw(adap, MEMWIN_NIC, mtype, maddr, st.st_size, + fw_cfg, T4_MEMORY_WRITE); + t4_os_unlock(&adap->win0_lock); + if (ret < 0) { + dev_debug(adap, "FW config file update failed: %d\n", ret); + goto out_free; + } + + rte_free(fw_cfg); + + *mem_type = mtype; + *mem_addr = maddr; + *config_name = fw_cfg_path; + return 0; + +out_err: + close(fd); +out_free: + rte_free(fw_cfg); + return ret; +} + +static int cxgbe_load_fw_config(struct adapter *adap) +{ + u32 finiver, finicsum, cfcsum, mtype, maddr, param, val; + struct fw_caps_config_cmd caps_cmd = { 0 }; + const char *config_name = NULL; + int ret; + + ret = cxgbe_load_fw_config_from_filesystem(adap, &config_name, + &mtype, &maddr); + if (ret < 0) { + config_name = "On Flash"; + + ret = t4_flash_cfg_addr(adap); + if (ret < 0) { + dev_warn(adap, + "Finding address for FW config file in flash failed: %d\n", + ret); + goto out_default_config; + } + + mtype = FW_MEMTYPE_CF_FLASH; + maddr = ret; + } + + /* Enable HASH filter region when support is available. */ + val = 1; + param = CXGBE_FW_PARAM_DEV(HASHFILTER_WITH_OFLD); + t4_set_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. + */ + caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ); + caps_cmd.cfvalid_to_len16 = + cpu_to_be32(F_FW_CAPS_CONFIG_CMD_CFVALID | + V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + +out_default_config: + /* + * If the CAPS_CONFIG failed with an ENOENT (for a Firmware + * Configuration File in filesystem or FLASH), our last gasp + * effort is to use the Firmware Configuration File which is + * embedded in the firmware. + */ + if (ret == -ENOENT) { + config_name = "Firmware Default"; + + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ); + caps_cmd.cfvalid_to_len16 = cpu_to_be32(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + } + + if (ret < 0) { + dev_info(adap, + "Failed to configure using %s Firmware Configuration file: %d\n", + config_name, ret); + return ret; + } + + finiver = be32_to_cpu(caps_cmd.finiver); + finicsum = be32_to_cpu(caps_cmd.finicsum); + cfcsum = be32_to_cpu(caps_cmd.cfcsum); + if (finicsum != cfcsum) + dev_warn(adap, + "Configuration File checksum mismatch: [fini] csum=0x%x, computed csum=0x%x\n", + finicsum, cfcsum); + + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.niccaps &= cpu_to_be16(~FW_CAPS_CONFIG_NIC_ETHOFLD); + caps_cmd.toecaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; + caps_cmd.cryptocaps = 0; + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE); + caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) { + dev_warn(adap, "Unable to finalize Firmware Capabilities %d\n", + ret); + return ret; + } + + /* + * Return successfully and note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants buried in the driver. + */ + dev_info(adap, + "Successfully configured using Firmware Configuration File \"%s\", version: 0x%x, computed csum: 0x%x\n", + config_name, finiver, cfcsum); + return 0; +} + static void configure_pcie_ext_tag(struct adapter *adapter) { u16 v; @@ -1119,12 +1333,7 @@ static int adap_init0_tweaks(struct adapter *adapter) */ static int adap_init0_config(struct adapter *adapter, int reset) { - u32 finiver, finicsum, cfcsum, param, val; - struct fw_caps_config_cmd caps_cmd; - unsigned long mtype = 0, maddr = 0; - u8 config_issued = 0; - char config_name[20]; - int cfg_addr, ret; + int ret; /* * Reset device if necessary. @@ -1139,98 +1348,10 @@ static int adap_init0_config(struct adapter *adapter, int reset) } } - cfg_addr = t4_flash_cfg_addr(adapter); - if (cfg_addr < 0) { - ret = cfg_addr; - dev_warn(adapter, "Finding address for firmware config file in flash failed, error %d\n", - -ret); - goto bye; - } - - strcpy(config_name, "On Flash"); - mtype = FW_MEMTYPE_CF_FLASH; - maddr = cfg_addr; - - /* Enable HASH filter region when support is available. */ - val = 1; - param = CXGBE_FW_PARAM_DEV(HASHFILTER_WITH_OFLD); - t4_set_params(adapter, adapter->mbox, adapter->pf, 0, 1, - ¶m, &val); - - /* - * Issue a Capability Configuration command to the firmware to get it - * to parse the Configuration File. We don't use t4_fw_config_file() - * because we want the ability to modify various features after we've - * processed the configuration file ... - */ - memset(&caps_cmd, 0, sizeof(caps_cmd)); - caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | - F_FW_CMD_REQUEST | F_FW_CMD_READ); - caps_cmd.cfvalid_to_len16 = - cpu_to_be32(F_FW_CAPS_CONFIG_CMD_CFVALID | - V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | - V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | - FW_LEN16(caps_cmd)); - ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), - &caps_cmd); - /* - * If the CAPS_CONFIG failed with an ENOENT (for a Firmware - * Configuration File in FLASH), our last gasp effort is to use the - * Firmware Configuration File which is embedded in the firmware. A - * very few early versions of the firmware didn't have one embedded - * but we can ignore those. - */ - if (ret == -ENOENT) { - dev_info(adapter, "%s: Going for embedded config in firmware..\n", - __func__); - - memset(&caps_cmd, 0, sizeof(caps_cmd)); - caps_cmd.op_to_write = - cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | - F_FW_CMD_REQUEST | F_FW_CMD_READ); - caps_cmd.cfvalid_to_len16 = cpu_to_be32(FW_LEN16(caps_cmd)); - ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, - sizeof(caps_cmd), &caps_cmd); - strcpy(config_name, "Firmware Default"); - } - - config_issued = 1; + ret = cxgbe_load_fw_config(adapter); if (ret < 0) goto bye; - finiver = be32_to_cpu(caps_cmd.finiver); - finicsum = be32_to_cpu(caps_cmd.finicsum); - cfcsum = be32_to_cpu(caps_cmd.cfcsum); - if (finicsum != cfcsum) - dev_warn(adapter, "Configuration File checksum mismatch: [fini] csum=%#x, computed csum=%#x\n", - finicsum, cfcsum); - - /* - * If we're a pure NIC driver then disable all offloading facilities. - * This will allow the firmware to optimize aspects of the hardware - * configuration which will result in improved performance. - */ - caps_cmd.niccaps &= cpu_to_be16(~FW_CAPS_CONFIG_NIC_ETHOFLD); - caps_cmd.toecaps = 0; - caps_cmd.iscsicaps = 0; - caps_cmd.rdmacaps = 0; - caps_cmd.fcoecaps = 0; - caps_cmd.cryptocaps = 0; - - /* - * And now tell the firmware to use the configuration we just loaded. - */ - caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | - F_FW_CMD_REQUEST | F_FW_CMD_WRITE); - caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); - ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), - NULL); - if (ret < 0) { - dev_warn(adapter, "Unable to finalize Firmware Capabilities %d\n", - -ret); - goto bye; - } - /* * Tweak configuration based on system architecture, etc. */ @@ -1251,27 +1372,9 @@ static int adap_init0_config(struct adapter *adapter, int reset) goto bye; } - /* - * Return successfully and note that we're operating with parameters - * not supplied by the driver, rather than from hard-wired - * initialization constants buried in the driver. - */ - dev_info(adapter, - "Successfully configured using Firmware Configuration File \"%s\", version %#x, computed checksum %#x\n", - config_name, finiver, cfcsum); - return 0; - /* - * Something bad happened. Return the error ... (If the "error" - * is that there's no Configuration File on the adapter we don't - * want to issue a warning since this is fairly common.) - */ bye: - if (config_issued && ret != -ENOENT) - dev_warn(adapter, "\"%s\" configuration file error %d\n", - config_name, -ret); - dev_debug(adapter, "%s: returning ret = %d ..\n", __func__, ret); return ret; }