d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

net/mlx5: fix setting offsets for SW parser

Browse Source 
Since ConnectX-5, SW parser just complements HW parser. SW parser starts to
engage only if HW parser can't reach a header. For the older devices, HW
parser will not kick in if any of SWP offsets is set. Therefore, all of the
L3 offsets should be set regardless of HW offload. As IPv6 doesn't have
header checksum, the mbuf can't have PKT_TX_[OUTER_]IP_CKSUM if outer or
inner L3 is IPv6.

And if inner packet isn't IP, the inner offsets shouldn't be set.

Fixes: 5f8ba81c4228 ("net/mlx5: support generic tunnel offloading")

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
This commit is contained in:
Yongseok Koh 2018-05-22 01:59:42 -07:00 committed by Ferruh Yigit
parent e435197a5f
commit 8589e944d0
1 changed files with 27 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
drivers/net/mlx5/mlx5_rxtx.h
View File

@ -655,10 +655,13 @@ txq_mbuf_to_swp(struct mlx5_txq_data *txq, struct rte_mbuf *buf,
uint8_t *offsets, uint8_t *swp_types)
{
uint64_t tunnel = buf->ol_flags & PKT_TX_TUNNEL_MASK;
uint16_t idx;
uint16_t off;
const uint64_t csum_flags = buf->ol_flags & PKT_TX_L4_MASK;
const uint64_t inner_ip =
buf->ol_flags & (PKT_TX_IPV4 | PKT_TX_IPV6);
const uint64_t ol_flags_mask = PKT_TX_L4_MASK | PKT_TX_IPV6 |
PKT_TX_OUTER_IPV6;
uint16_t idx;
uint16_t off;
if (likely(!tunnel || !txq->swp_en ||
(tunnel != PKT_TX_TUNNEL_UDP && tunnel != PKT_TX_TUNNEL_IP)))
@ -674,20 +677,28 @@ txq_mbuf_to_swp(struct mlx5_txq_data *txq, struct rte_mbuf *buf,
if (tunnel == PKT_TX_TUNNEL_UDP)
idx |= 1 << 9;
*swp_types = mlx5_swp_types_table[idx];
/* swp offsets. */
off = buf->outer_l2_len + (vlan ? 4 : 0); /* Outer L3 offset. */
if (tso || (buf->ol_flags & PKT_TX_OUTER_IP_CKSUM))
offsets[1] = off >> 1;
off += buf->outer_l3_len; /* Outer L4 offset. */
if (tunnel == PKT_TX_TUNNEL_UDP)
offsets[0] = off >> 1;
off += buf->l2_len; /* Inner L3 offset. */
if (tso || (buf->ol_flags & PKT_TX_IP_CKSUM))
offsets[3] = off >> 1;
off += buf->l3_len; /* Inner L4 offset. */
if (tso || ((buf->ol_flags & PKT_TX_L4_MASK) == PKT_TX_TCP_CKSUM) ||
((buf->ol_flags & PKT_TX_L4_MASK) == PKT_TX_UDP_CKSUM))
offsets[2] = off >> 1;
/*
* Set offsets for SW parser. Since ConnectX-5, SW parser just
* complements HW parser. SW parser starts to engage only if HW parser
* can't reach a header. For the older devices, HW parser will not kick
* in if any of SWP offsets is set. Therefore, all of the L3 offsets
* should be set regardless of HW offload.
*/
off = buf->outer_l2_len + (vlan ? 4 : 0);
offsets[1] = off >> 1; /* Outer L3 offset. */
if (tunnel == PKT_TX_TUNNEL_UDP) {
off += buf->outer_l3_len;
offsets[0] = off >> 1; /* Outer L4 offset. */
}
if (inner_ip) {
off += buf->l2_len;
offsets[3] = off >> 1; /* Inner L3 offset. */
if (csum_flags == PKT_TX_TCP_CKSUM || tso ||
csum_flags == PKT_TX_UDP_CKSUM) {
off += buf->l3_len;
offsets[2] = off >> 1; /* Inner L4 offset. */
}
}
}
/**