crypto/octeontx: support ECPM

Add support for asymmetric operation EC Point Multiplication,
in crypto_octeontx PMD.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Balakrishna Bhamidipati <bbhamidipati@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>

doc/guides/cryptodevs/features/octeontx.ini

@@ -73,3 +73,4 @@ Modular Exponentiation  = Y
 Modular Inversion       =
 Diffie-hellman          =
 ECDSA                   = Y
+ECPM                    = Y

drivers/common/cpt/cpt_mcode_defines.h

@@ -24,6 +24,7 @@
 /* AE opcodes */
 #define CPT_MAJOR_OP_MODEX	0x03
 #define CPT_MAJOR_OP_ECDSA	0x04
+#define CPT_MAJOR_OP_ECC	0x05
 #define CPT_MINOR_OP_MODEX	0x01
 #define CPT_MINOR_OP_PKCS_ENC	0x02
 #define CPT_MINOR_OP_PKCS_ENC_CRT	0x03
@@ -32,6 +33,7 @@
 #define CPT_MINOR_OP_MODEX_CRT	0x06
 #define CPT_MINOR_OP_ECDSA_SIGN	0x01
 #define CPT_MINOR_OP_ECDSA_VERIFY	0x02
+#define CPT_MINOR_OP_ECC_UMP	0x03
 
 #define CPT_BLOCK_TYPE1 0
 #define CPT_BLOCK_TYPE2 1

drivers/common/cpt/cpt_ucode_asym.h

@@ -172,6 +172,8 @@ cpt_fill_asym_session_parameters(struct cpt_asym_sess_misc *sess,
 		ret = cpt_fill_modex_params(sess, xform);
 		break;
 	case RTE_CRYPTO_ASYM_XFORM_ECDSA:
+		/* Fall through */
+	case RTE_CRYPTO_ASYM_XFORM_ECPM:
 		ret = cpt_fill_ec_params(sess, xform);
 		break;
 	default:
@@ -199,6 +201,8 @@ cpt_free_asym_session_parameters(struct cpt_asym_sess_misc *sess)
 			rte_free(mod->modulus.data);
 		break;
 	case RTE_CRYPTO_ASYM_XFORM_ECDSA:
+		/* Fall through */
+	case RTE_CRYPTO_ASYM_XFORM_ECPM:
 		break;
 	default:
 		CPT_LOG_DP_ERR("Invalid transform type");
@@ -828,4 +832,85 @@ cpt_enqueue_ecdsa_op(struct rte_crypto_op *op,
 	return 0;
 }
 
+static __rte_always_inline int
+cpt_ecpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
+	      struct asym_op_params *asym_params,
+	      uint8_t curveid)
+{
+	struct cpt_request_info *req = asym_params->req;
+	phys_addr_t mphys = asym_params->meta_buf;
+	uint16_t x1_len = ecpm->p.x.length;
+	uint16_t y1_len = ecpm->p.y.length;
+	uint16_t scalar_align, p_align;
+	uint16_t dlen, rlen, prime_len;
+	uint16_t x1_offset, y1_offset;
+	vq_cmd_word0_t vq_cmd_w0;
+	opcode_info_t opcode;
+	buf_ptr_t caddr;
+	uint8_t *dptr;
+
+	prime_len = ec_grp[curveid].prime.length;
+
+	/* Input buffer */
+	dptr = RTE_PTR_ADD(req, sizeof(struct cpt_request_info));
+
+	p_align = ROUNDUP8(prime_len);
+	scalar_align = ROUNDUP8(ecpm->scalar.length);
+
+	/*
+	 * Set dlen = sum(ROUNDUP8(input point(x and y coordinates), prime,
+	 * scalar length),
+	 * Please note point length is equivalent to prime of the curve
+	 */
+	dlen = 3 * p_align + scalar_align;
+
+	x1_offset = prime_len - x1_len;
+	y1_offset = prime_len - y1_len;
+
+	memset(dptr, 0, dlen);
+
+	/* Copy input point, scalar, prime */
+	memcpy(dptr + x1_offset, ecpm->p.x.data, x1_len);
+	dptr += p_align;
+	memcpy(dptr + y1_offset, ecpm->p.y.data, y1_len);
+	dptr += p_align;
+	memcpy(dptr, ecpm->scalar.data, ecpm->scalar.length);
+	dptr += scalar_align;
+	memcpy(dptr, ec_grp[curveid].prime.data, ec_grp[curveid].prime.length);
+	dptr += p_align;
+
+	/* Setup opcodes */
+	opcode.s.major = CPT_MAJOR_OP_ECC;
+	opcode.s.minor = CPT_MINOR_OP_ECC_UMP;
+
+	/* GP op header */
+	vq_cmd_w0.s.opcode = opcode.flags;
+	vq_cmd_w0.s.param1 = curveid;
+	vq_cmd_w0.s.param2 = ecpm->scalar.length;
+	vq_cmd_w0.s.dlen = dlen;
+	vq_cmd_w0.u64 = vq_cmd_w0.u64;
+
+	/* Filling cpt_request_info structure */
+	req->ist.ei0 = vq_cmd_w0.u64;
+	req->ist.ei1 = mphys;
+	req->ist.ei2 = mphys + dlen;
+
+	/* Result buffer will store output point where length of
+	 * each coordinate will be of prime length, thus set
+	 * rlen to twice of prime length.
+	 */
+	rlen = p_align << 1;
+	req->rptr = dptr;
+
+	/* alternate_caddr to write completion status by the microcode */
+	req->alternate_caddr = (uint64_t *)(dptr + rlen);
+	*req->alternate_caddr = ~((uint64_t)COMPLETION_CODE_INIT);
+
+	/* Preparing completion addr, +1 for completion code */
+	caddr.vaddr = dptr + rlen + 1;
+	caddr.dma_addr = mphys + dlen + rlen + 1;
+
+	cpt_fill_req_comp_addr(req, caddr);
+	return 0;
+}
 #endif /* _CPT_UCODE_ASYM_H_ */

drivers/crypto/octeontx/otx_cryptodev_capabilities.c

@@ -641,6 +641,16 @@ static const struct rte_cryptodev_capabilities otx_asym_capabilities[] = {
 			},
 		}
 	},
+	{	/* ECPM */
+		.op = RTE_CRYPTO_OP_TYPE_ASYMMETRIC,
+		{.asym = {
+			.xform_capa = {
+				.xform_type = RTE_CRYPTO_ASYM_XFORM_ECPM,
+				.op_types = 0
+				}
+			},
+		}
+	},
 	/* End of asymmetric capabilities */
 	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };

drivers/crypto/octeontx/otx_cryptodev_ops.c

@@ -443,6 +443,13 @@ otx_cpt_enq_single_asym(struct cpt_instance *instance,
 		if (unlikely(ret))
 			goto req_fail;
 		break;
+	case RTE_CRYPTO_ASYM_XFORM_ECPM:
+		ret = cpt_ecpm_prep(&asym_op->ecpm, &params,
+				    sess->ec_ctx.curveid);
+		if (unlikely(ret))
+			goto req_fail;
+		break;
+
 	default:
 		op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
 		ret = -EINVAL;
@@ -704,6 +711,19 @@ otx_cpt_asym_dequeue_ecdsa_op(struct rte_crypto_ecdsa_op_param *ecdsa,
 	ecdsa->s.length = prime_len;
 }
 
+static __rte_always_inline void
+otx_cpt_asym_dequeue_ecpm_op(struct rte_crypto_ecpm_op_param *ecpm,
+			     struct cpt_request_info *req,
+			     struct cpt_asym_ec_ctx *ec)
+{
+	int prime_len = ec_grp[ec->curveid].prime.length;
+
+	memcpy(ecpm->r.x.data, req->rptr, prime_len);
+	memcpy(ecpm->r.y.data, req->rptr + ROUNDUP8(prime_len), prime_len);
+	ecpm->r.x.length = prime_len;
+	ecpm->r.y.length = prime_len;
+}
+
 static __rte_always_inline void __hot
 otx_cpt_asym_post_process(struct rte_crypto_op *cop,
 			  struct cpt_request_info *req)
@@ -726,6 +746,9 @@ otx_cpt_asym_post_process(struct rte_crypto_op *cop,
 	case RTE_CRYPTO_ASYM_XFORM_ECDSA:
 		otx_cpt_asym_dequeue_ecdsa_op(&op->ecdsa, req, &sess->ec_ctx);
 		break;
+	case RTE_CRYPTO_ASYM_XFORM_ECPM:
+		otx_cpt_asym_dequeue_ecpm_op(&op->ecpm, req, &sess->ec_ctx);
+		break;
 	default:
 		CPT_LOG_DP_DEBUG("Invalid crypto xform type");
 		cop->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;