diff --git a/drivers/net/e1000/base/e1000_api.c b/drivers/net/e1000/base/e1000_api.c index bbfcae8859..2abe8db156 100644 --- a/drivers/net/e1000/base/e1000_api.c +++ b/drivers/net/e1000/base/e1000_api.c @@ -298,6 +298,17 @@ s32 e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_PCH_I218_V3: mac->type = e1000_pch_lpt; break; + case E1000_DEV_ID_PCH_SPT_I219_LM: + case E1000_DEV_ID_PCH_SPT_I219_V: + case E1000_DEV_ID_PCH_SPT_I219_LM2: + case E1000_DEV_ID_PCH_SPT_I219_V2: + case E1000_DEV_ID_PCH_LBG_I219_LM3: + case E1000_DEV_ID_PCH_SPT_I219_LM4: + case E1000_DEV_ID_PCH_SPT_I219_V4: + case E1000_DEV_ID_PCH_SPT_I219_LM5: + case E1000_DEV_ID_PCH_SPT_I219_V5: + mac->type = e1000_pch_spt; + break; case E1000_DEV_ID_82575EB_COPPER: case E1000_DEV_ID_82575EB_FIBER_SERDES: case E1000_DEV_ID_82575GB_QUAD_COPPER: @@ -448,6 +459,7 @@ s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device) case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: e1000_init_function_pointers_ich8lan(hw); break; case e1000_82575: diff --git a/drivers/net/e1000/base/e1000_defines.h b/drivers/net/e1000/base/e1000_defines.h index 7d70ba6bac..dbc2bbbe06 100644 --- a/drivers/net/e1000/base/e1000_defines.h +++ b/drivers/net/e1000/base/e1000_defines.h @@ -198,6 +198,7 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ #define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ #define E1000_RCTL_RDMTS_HEX 0x00010000 +#define E1000_RCTL_RDMTS1_HEX E1000_RCTL_RDMTS_HEX #define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ #define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ #define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ @@ -753,6 +754,12 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ #define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ +/* HH Time Sync */ +#define E1000_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK 0x0000F000 /* max delay */ +#define E1000_TSYNCTXCTL_SYNC_COMP_ERR 0x20000000 /* sync err */ +#define E1000_TSYNCTXCTL_SYNC_COMP 0x40000000 /* sync complete */ +#define E1000_TSYNCTXCTL_START_SYNC 0x80000000 /* initiate sync */ + #define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ #define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ #define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 diff --git a/drivers/net/e1000/base/e1000_hw.h b/drivers/net/e1000/base/e1000_hw.h index e4e4f764cc..14e2e87b10 100644 --- a/drivers/net/e1000/base/e1000_hw.h +++ b/drivers/net/e1000/base/e1000_hw.h @@ -136,6 +136,15 @@ struct e1000_hw; #define E1000_DEV_ID_PCH_I218_V2 0x15A1 #define E1000_DEV_ID_PCH_I218_LM3 0x15A2 /* Wildcat Point PCH */ #define E1000_DEV_ID_PCH_I218_V3 0x15A3 /* Wildcat Point PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_LM 0x156F /* Sunrise Point PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_V 0x1570 /* Sunrise Point PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_LM2 0x15B7 /* Sunrise Point-H PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_V2 0x15B8 /* Sunrise Point-H PCH */ +#define E1000_DEV_ID_PCH_LBG_I219_LM3 0x15B9 /* LEWISBURG PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_LM4 0x15D7 +#define E1000_DEV_ID_PCH_SPT_I219_V4 0x15D8 +#define E1000_DEV_ID_PCH_SPT_I219_LM5 0x15E3 +#define E1000_DEV_ID_PCH_SPT_I219_V5 0x15D6 #define E1000_DEV_ID_82576 0x10C9 #define E1000_DEV_ID_82576_FIBER 0x10E6 #define E1000_DEV_ID_82576_SERDES 0x10E7 @@ -221,6 +230,7 @@ enum e1000_mac_type { e1000_pchlan, e1000_pch2lan, e1000_pch_lpt, + e1000_pch_spt, e1000_82575, e1000_82576, e1000_82580, @@ -954,7 +964,10 @@ struct e1000_dev_spec_ich8lan { u16 eee_lp_ability; #ifdef ULP_SUPPORT enum e1000_ulp_state ulp_state; -#endif /* NAHUM6LP_HW && ULP_SUPPORT */ + bool ulp_capability_disabled; + bool during_suspend_flow; + bool during_dpg_exit; +#endif /* ULP_SUPPORT */ u16 lat_enc; u16 max_ltr_enc; bool smbus_disable; diff --git a/drivers/net/e1000/base/e1000_ich8lan.c b/drivers/net/e1000/base/e1000_ich8lan.c index 0837a40c06..7ab0f7cc05 100644 --- a/drivers/net/e1000/base/e1000_ich8lan.c +++ b/drivers/net/e1000/base/e1000_ich8lan.c @@ -94,10 +94,13 @@ STATIC s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active); STATIC s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +STATIC s32 e1000_read_nvm_spt(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); STATIC s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); STATIC s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw); STATIC s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw); +STATIC s32 e1000_update_nvm_checksum_spt(struct e1000_hw *hw); STATIC s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data); STATIC s32 e1000_id_led_init_pchlan(struct e1000_hw *hw); @@ -125,6 +128,14 @@ STATIC s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, u8 *data); STATIC s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); +STATIC s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data); +STATIC s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 *data); +STATIC s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, + u32 offset, u32 data); +STATIC s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 dword); STATIC s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, u16 *data); STATIC s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, @@ -233,7 +244,7 @@ STATIC bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) if (ret_val) return false; out: - if (hw->mac.type == e1000_pch_lpt) { + if (hw->mac.type >= e1000_pch_lpt) { /* Only unforce SMBus if ME is not active */ if (!(E1000_READ_REG(hw, E1000_FWSM) & E1000_ICH_FWSM_FW_VALID)) { @@ -334,6 +345,7 @@ STATIC s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) */ switch (hw->mac.type) { case e1000_pch_lpt: + case e1000_pch_spt: if (e1000_phy_is_accessible_pchlan(hw)) break; @@ -481,6 +493,7 @@ STATIC s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) /* fall-through */ case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ @@ -623,37 +636,58 @@ STATIC s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 gfpreg, sector_base_addr, sector_end_addr; u16 i; + u32 nvm_size; DEBUGFUNC("e1000_init_nvm_params_ich8lan"); - /* Can't read flash registers if the register set isn't mapped. */ nvm->type = e1000_nvm_flash_sw; - if (!hw->flash_address) { - DEBUGOUT("ERROR: Flash registers not mapped\n"); - return -E1000_ERR_CONFIG; + + if (hw->mac.type >= e1000_pch_spt) { + /* in SPT, gfpreg doesn't exist. NVM size is taken from the + * STRAP register. This is because in SPT the GbE Flash region + * is no longer accessed through the flash registers. Instead, + * the mechanism has changed, and the Flash region access + * registers are now implemented in GbE memory space. + */ + nvm->flash_base_addr = 0; + nvm_size = + (((E1000_READ_REG(hw, E1000_STRAP) >> 1) & 0x1F) + 1) + * NVM_SIZE_MULTIPLIER; + nvm->flash_bank_size = nvm_size / 2; + /* Adjust to word count */ + nvm->flash_bank_size /= sizeof(u16); + /* Set the base address for flash register access */ + hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR; + } else { + /* Can't read flash registers if register set isn't mapped. */ + if (!hw->flash_address) { + DEBUGOUT("ERROR: Flash registers not mapped\n"); + return -E1000_ERR_CONFIG; + } + + gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG); + + /* sector_X_addr is a "sector"-aligned address (4096 bytes) + * Add 1 to sector_end_addr since this sector is included in + * the overall size. + */ + sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; + sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; + + /* flash_base_addr is byte-aligned */ + nvm->flash_base_addr = sector_base_addr + << FLASH_SECTOR_ADDR_SHIFT; + + /* find total size of the NVM, then cut in half since the total + * size represents two separate NVM banks. + */ + nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) + << FLASH_SECTOR_ADDR_SHIFT); + nvm->flash_bank_size /= 2; + /* Adjust to word count */ + nvm->flash_bank_size /= sizeof(u16); } - gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG); - - /* sector_X_addr is a "sector"-aligned address (4096 bytes) - * Add 1 to sector_end_addr since this sector is included in - * the overall size. - */ - sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; - sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; - - /* flash_base_addr is byte-aligned */ - nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; - - /* find total size of the NVM, then cut in half since the total - * size represents two separate NVM banks. - */ - nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) - << FLASH_SECTOR_ADDR_SHIFT); - nvm->flash_bank_size /= 2; - /* Adjust to word count */ - nvm->flash_bank_size /= sizeof(u16); - nvm->word_size = E1000_SHADOW_RAM_WORDS; /* Clear shadow ram */ @@ -668,8 +702,13 @@ STATIC s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Function Pointers */ nvm->ops.acquire = e1000_acquire_nvm_ich8lan; nvm->ops.release = e1000_release_nvm_ich8lan; - nvm->ops.read = e1000_read_nvm_ich8lan; - nvm->ops.update = e1000_update_nvm_checksum_ich8lan; + if (hw->mac.type >= e1000_pch_spt) { + nvm->ops.read = e1000_read_nvm_spt; + nvm->ops.update = e1000_update_nvm_checksum_spt; + } else { + nvm->ops.read = e1000_read_nvm_ich8lan; + nvm->ops.update = e1000_update_nvm_checksum_ich8lan; + } nvm->ops.valid_led_default = e1000_valid_led_default_ich8lan; nvm->ops.validate = e1000_validate_nvm_checksum_ich8lan; nvm->ops.write = e1000_write_nvm_ich8lan; @@ -758,6 +797,7 @@ STATIC s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) mac->ops.rar_set = e1000_rar_set_pch2lan; /* fall-through */ case e1000_pch_lpt: + case e1000_pch_spt: #ifndef NO_NON_BLOCKING_PHY_MTA_UPDATE_SUPPORT /* multicast address update for pch2 */ mac->ops.update_mc_addr_list = @@ -768,7 +808,13 @@ STATIC s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) #if defined(QV_RELEASE) || !defined(NO_PCH_LPT_B0_SUPPORT) /* save PCH revision_id */ e1000_read_pci_cfg(hw, E1000_PCI_REVISION_ID_REG, &pci_cfg); - hw->revision_id = (u8)(pci_cfg &= 0x000F); + /* SPT uses full byte for revision ID, + * as opposed to previous generations + */ + if (hw->mac.type >= e1000_pch_spt) + hw->revision_id = (u8)(pci_cfg &= 0x00FF); + else + hw->revision_id = (u8)(pci_cfg &= 0x000F); #endif /* QV_RELEASE || !defined(NO_PCH_LPT_B0_SUPPORT) */ /* check management mode */ mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan; @@ -786,7 +832,7 @@ STATIC s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) break; } - if (mac->type == e1000_pch_lpt) { + if (mac->type >= e1000_pch_lpt) { mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES; mac->ops.rar_set = e1000_rar_set_pch_lpt; mac->ops.setup_physical_interface = e1000_setup_copper_link_pch_lpt; @@ -1015,8 +1061,9 @@ STATIC s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) /* clear FEXTNVM6 bit 8 on link down or 10/100 */ fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK; - if (!link || ((status & E1000_STATUS_SPEED_100) && - (status & E1000_STATUS_FD))) + if ((hw->phy.revision > 5) || !link || + ((status & E1000_STATUS_SPEED_100) && + (status & E1000_STATUS_FD))) goto update_fextnvm6; ret_val = hw->phy.ops.read_reg(hw, I217_INBAND_CTRL, ®); @@ -1490,8 +1537,7 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * aggressive resulting in many collisions. To avoid this, increase * the IPG and reduce Rx latency in the PHY. */ - if (((hw->mac.type == e1000_pch2lan) || - (hw->mac.type == e1000_pch_lpt)) && link) { + if ((hw->mac.type >= e1000_pch2lan) && link) { u16 speed, duplex; e1000_get_speed_and_duplex_copper_generic(hw, &speed, &duplex); @@ -1502,6 +1548,10 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) tipg_reg |= 0xFF; /* Reduce Rx latency in analog PHY */ emi_val = 0; + } else if (hw->mac.type >= e1000_pch_spt && + duplex == FULL_DUPLEX && speed != SPEED_1000) { + tipg_reg |= 0xC; + emi_val = 1; } else { /* Roll back the default values */ tipg_reg |= 0x08; @@ -1539,6 +1589,49 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; + + if (hw->mac.type >= e1000_pch_spt) { + u16 data; + u16 ptr_gap; + + if (speed == SPEED_1000) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.read_reg_locked(hw, + PHY_REG(776, 20), + &data); + if (ret_val) { + hw->phy.ops.release(hw); + return ret_val; + } + + ptr_gap = (data & (0x3FF << 2)) >> 2; + if (ptr_gap < 0x18) { + data &= ~(0x3FF << 2); + data |= (0x18 << 2); + ret_val = + hw->phy.ops.write_reg_locked(hw, + PHY_REG(776, 20), data); + } + hw->phy.ops.release(hw); + if (ret_val) + return ret_val; + } else { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg_locked(hw, + PHY_REG(776, 20), + 0xC023); + hw->phy.ops.release(hw); + if (ret_val) + return ret_val; + + } + } } /* I217 Packet Loss issue: @@ -1546,7 +1639,7 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * on power up. * Set the Beacon Duration for I217 to 8 usec */ - if (hw->mac.type == e1000_pch_lpt) { + if (hw->mac.type >= e1000_pch_lpt) { u32 mac_reg; mac_reg = E1000_READ_REG(hw, E1000_FEXTNVM4); @@ -1568,10 +1661,26 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) hw->dev_spec.ich8lan.eee_lp_ability = 0; /* Configure K0s minimum time */ - if (hw->mac.type == e1000_pch_lpt) { + if (hw->mac.type >= e1000_pch_lpt) { e1000_configure_k0s_lpt(hw, K1_ENTRY_LATENCY, K1_MIN_TIME); } + if (hw->mac.type >= e1000_pch_lpt) { + u32 fextnvm6 = E1000_READ_REG(hw, E1000_FEXTNVM6); + + if (hw->mac.type == e1000_pch_spt) { + /* FEXTNVM6 K1-off workaround - for SPT only */ + u32 pcieanacfg = E1000_READ_REG(hw, E1000_PCIEANACFG); + + if (pcieanacfg & E1000_FEXTNVM6_K1_OFF_ENABLE) + fextnvm6 |= E1000_FEXTNVM6_K1_OFF_ENABLE; + else + fextnvm6 &= ~E1000_FEXTNVM6_K1_OFF_ENABLE; + } + + E1000_WRITE_REG(hw, E1000_FEXTNVM6, fextnvm6); + } + if (!link) return E1000_SUCCESS; /* No link detected */ @@ -1665,6 +1774,7 @@ void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw) case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: hw->phy.ops.init_params = e1000_init_phy_params_pchlan; break; default: @@ -2130,6 +2240,7 @@ STATIC s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; break; default: @@ -3253,6 +3364,40 @@ STATIC s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) DEBUGFUNC("e1000_valid_nvm_bank_detect_ich8lan"); switch (hw->mac.type) { + case e1000_pch_spt: + bank1_offset = nvm->flash_bank_size; + act_offset = E1000_ICH_NVM_SIG_WORD; + + /* set bank to 0 in case flash read fails */ + *bank = 0; + + /* Check bank 0 */ + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, + &nvm_dword); + if (ret_val) + return ret_val; + sig_byte = (u8)((nvm_dword & 0xFF00) >> 8); + if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == + E1000_ICH_NVM_SIG_VALUE) { + *bank = 0; + return E1000_SUCCESS; + } + + /* Check bank 1 */ + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset + + bank1_offset, + &nvm_dword); + if (ret_val) + return ret_val; + sig_byte = (u8)((nvm_dword & 0xFF00) >> 8); + if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == + E1000_ICH_NVM_SIG_VALUE) { + *bank = 1; + return E1000_SUCCESS; + } + + DEBUGOUT("ERROR: No valid NVM bank present\n"); + return -E1000_ERR_NVM; case e1000_ich8lan: case e1000_ich9lan: eecd = E1000_READ_REG(hw, E1000_EECD); @@ -3299,6 +3444,99 @@ STATIC s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) } } +/** + * e1000_read_nvm_spt - NVM access for SPT + * @hw: pointer to the HW structure + * @offset: The offset (in bytes) of the word(s) to read. + * @words: Size of data to read in words. + * @data: pointer to the word(s) to read at offset. + * + * Reads a word(s) from the NVM + **/ +STATIC s32 e1000_read_nvm_spt(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + u32 act_offset; + s32 ret_val = E1000_SUCCESS; + u32 bank = 0; + u32 dword = 0; + u16 offset_to_read; + u16 i; + + DEBUGFUNC("e1000_read_nvm_spt"); + + if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + nvm->ops.acquire(hw); + + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("Could not detect valid bank, assuming bank 0\n"); + bank = 0; + } + + act_offset = (bank) ? nvm->flash_bank_size : 0; + act_offset += offset; + + ret_val = E1000_SUCCESS; + + for (i = 0; i < words; i += 2) { + if (words - i == 1) { + if (dev_spec->shadow_ram[offset+i].modified) { + data[i] = dev_spec->shadow_ram[offset+i].value; + } else { + offset_to_read = act_offset + i - + ((act_offset + i) % 2); + ret_val = + e1000_read_flash_dword_ich8lan(hw, + offset_to_read, + &dword); + if (ret_val) + break; + if ((act_offset + i) % 2 == 0) + data[i] = (u16)(dword & 0xFFFF); + else + data[i] = (u16)((dword >> 16) & 0xFFFF); + } + } else { + offset_to_read = act_offset + i; + if (!(dev_spec->shadow_ram[offset+i].modified) || + !(dev_spec->shadow_ram[offset+i+1].modified)) { + ret_val = + e1000_read_flash_dword_ich8lan(hw, + offset_to_read, + &dword); + if (ret_val) + break; + } + if (dev_spec->shadow_ram[offset+i].modified) + data[i] = dev_spec->shadow_ram[offset+i].value; + else + data[i] = (u16) (dword & 0xFFFF); + if (dev_spec->shadow_ram[offset+i].modified) + data[i+1] = + dev_spec->shadow_ram[offset+i+1].value; + else + data[i+1] = (u16) (dword >> 16 & 0xFFFF); + } + } + + nvm->ops.release(hw); + +out: + if (ret_val) + DEBUGOUT1("NVM read error: %d\n", ret_val); + + return ret_val; +} + /** * e1000_read_nvm_ich8lan - Read word(s) from the NVM * @hw: pointer to the HW structure @@ -3386,7 +3624,11 @@ STATIC s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Clear FCERR and DAEL in hw status by writing 1 */ hsfsts.hsf_status.flcerr = 1; hsfsts.hsf_status.dael = 1; - E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type >= e1000_pch_spt) + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + hsfsts.regval & 0xFFFF); + else + E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or @@ -3402,7 +3644,12 @@ STATIC s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) * Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type >= e1000_pch_spt) + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + hsfsts.regval & 0xFFFF); + else + E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, + hsfsts.regval); ret_val = E1000_SUCCESS; } else { s32 i; @@ -3424,8 +3671,12 @@ STATIC s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, - hsfsts.regval); + if (hw->mac.type >= e1000_pch_spt) + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + hsfsts.regval & 0xFFFF); + else + E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, + hsfsts.regval); } else { DEBUGOUT("Flash controller busy, cannot get access\n"); } @@ -3450,10 +3701,17 @@ STATIC s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout) DEBUGFUNC("e1000_flash_cycle_ich8lan"); /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); + if (hw->mac.type >= e1000_pch_spt) + hsflctl.regval = E1000_READ_FLASH_REG(hw, ICH_FLASH_HSFSTS)>>16; + else + hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcgo = 1; - E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); + if (hw->mac.type >= e1000_pch_spt) + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + hsflctl.regval << 16); + else + E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* wait till FDONE bit is set to 1 */ do { @@ -3469,6 +3727,29 @@ STATIC s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout) return -E1000_ERR_NVM; } +/** + * e1000_read_flash_dword_ich8lan - Read dword from flash + * @hw: pointer to the HW structure + * @offset: offset to data location + * @data: pointer to the location for storing the data + * + * Reads the flash dword at offset into data. Offset is converted + * to bytes before read. + **/ +STATIC s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data) +{ + DEBUGFUNC("e1000_read_flash_dword_ich8lan"); + + if (!data) + return -E1000_ERR_NVM; + + /* Must convert word offset into bytes. */ + offset <<= 1; + + return e1000_read_flash_data32_ich8lan(hw, offset, data); +} + /** * e1000_read_flash_word_ich8lan - Read word from flash * @hw: pointer to the HW structure @@ -3506,7 +3787,13 @@ STATIC s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, s32 ret_val; u16 word = 0; - ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); + /* In SPT, only 32 bits access is supported, + * so this function should not be called. + */ + if (hw->mac.type >= e1000_pch_spt) + return -E1000_ERR_NVM; + else + ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); if (ret_val) return ret_val; @@ -3592,6 +3879,83 @@ STATIC s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, return ret_val; } +/** + * e1000_read_flash_data32_ich8lan - Read dword from NVM + * @hw: pointer to the HW structure + * @offset: The offset (in bytes) of the dword to read. + * @data: Pointer to the dword to store the value read. + * + * Reads a byte or word from the NVM using the flash access registers. + **/ +STATIC s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + u32 flash_linear_addr; + s32 ret_val = -E1000_ERR_NVM; + u8 count = 0; + + DEBUGFUNC("e1000_read_flash_data_ich8lan"); + + if (offset > ICH_FLASH_LINEAR_ADDR_MASK || + hw->mac.type < e1000_pch_spt) + return -E1000_ERR_NVM; + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); + + do { + usec_delay(1); + /* Steps */ + ret_val = e1000_flash_cycle_init_ich8lan(hw); + if (ret_val != E1000_SUCCESS) + break; + /* In SPT, This register is in Lan memory space, not flash. + * Therefore, only 32 bit access is supported + */ + hsflctl.regval = E1000_READ_FLASH_REG(hw, ICH_FLASH_HSFSTS)>>16; + + /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ + hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1; + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; + /* In SPT, This register is in Lan memory space, not flash. + * Therefore, only 32 bit access is supported + */ + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + (u32)hsflctl.regval << 16); + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_addr); + + ret_val = e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_READ_COMMAND_TIMEOUT); + + /* Check if FCERR is set to 1, if set to 1, clear it + * and try the whole sequence a few more times, else + * read in (shift in) the Flash Data0, the order is + * least significant byte first msb to lsb + */ + if (ret_val == E1000_SUCCESS) { + *data = E1000_READ_FLASH_REG(hw, ICH_FLASH_FDATA0); + break; + } else { + /* If we've gotten here, then things are probably + * completely hosed, but if the error condition is + * detected, it won't hurt to give it another try... + * ICH_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = E1000_READ_FLASH_REG16(hw, + ICH_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcerr) { + /* Repeat for some time before giving up. */ + continue; + } else if (!hsfsts.hsf_status.flcdone) { + DEBUGOUT("Timeout error - flash cycle did not complete.\n"); + break; + } + } + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); + + return ret_val; +} /** * e1000_write_nvm_ich8lan - Write word(s) to the NVM @@ -3629,6 +3993,175 @@ STATIC s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, return E1000_SUCCESS; } +/** + * e1000_update_nvm_checksum_spt - Update the checksum for NVM + * @hw: pointer to the HW structure + * + * The NVM checksum is updated by calling the generic update_nvm_checksum, + * which writes the checksum to the shadow ram. The changes in the shadow + * ram are then committed to the EEPROM by processing each bank at a time + * checking for the modified bit and writing only the pending changes. + * After a successful commit, the shadow ram is cleared and is ready for + * future writes. + **/ +STATIC s32 e1000_update_nvm_checksum_spt(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + u32 i, act_offset, new_bank_offset, old_bank_offset, bank; + s32 ret_val; + u32 dword = 0; + + DEBUGFUNC("e1000_update_nvm_checksum_spt"); + + ret_val = e1000_update_nvm_checksum_generic(hw); + if (ret_val) + goto out; + + if (nvm->type != e1000_nvm_flash_sw) + goto out; + + nvm->ops.acquire(hw); + + /* We're writing to the opposite bank so if we're on bank 1, + * write to bank 0 etc. We also need to erase the segment that + * is going to be written + */ + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("Could not detect valid bank, assuming bank 0\n"); + bank = 0; + } + + if (bank == 0) { + new_bank_offset = nvm->flash_bank_size; + old_bank_offset = 0; + ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); + if (ret_val) + goto release; + } else { + old_bank_offset = nvm->flash_bank_size; + new_bank_offset = 0; + ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); + if (ret_val) + goto release; + } + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i += 2) { + /* Determine whether to write the value stored + * in the other NVM bank or a modified value stored + * in the shadow RAM + */ + ret_val = e1000_read_flash_dword_ich8lan(hw, + i + old_bank_offset, + &dword); + + if (dev_spec->shadow_ram[i].modified) { + dword &= 0xffff0000; + dword |= (dev_spec->shadow_ram[i].value & 0xffff); + } + if (dev_spec->shadow_ram[i + 1].modified) { + dword &= 0x0000ffff; + dword |= ((dev_spec->shadow_ram[i + 1].value & 0xffff) + << 16); + } + if (ret_val) + break; + + /* If the word is 0x13, then make sure the signature bits + * (15:14) are 11b until the commit has completed. + * This will allow us to write 10b which indicates the + * signature is valid. We want to do this after the write + * has completed so that we don't mark the segment valid + * while the write is still in progress + */ + if (i == E1000_ICH_NVM_SIG_WORD - 1) + dword |= E1000_ICH_NVM_SIG_MASK << 16; + + /* Convert offset to bytes. */ + act_offset = (i + new_bank_offset) << 1; + + usec_delay(100); + + /* Write the data to the new bank. Offset in words*/ + act_offset = i + new_bank_offset; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, + dword); + if (ret_val) + break; + } + + /* Don't bother writing the segment valid bits if sector + * programming failed. + */ + if (ret_val) { + DEBUGOUT("Flash commit failed.\n"); + goto release; + } + + /* Finally validate the new segment by setting bit 15:14 + * to 10b in word 0x13 , this can be done without an + * erase as well since these bits are 11 to start with + * and we need to change bit 14 to 0b + */ + act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; + + /*offset in words but we read dword*/ + --act_offset; + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword); + + if (ret_val) + goto release; + + dword &= 0xBFFFFFFF; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword); + + if (ret_val) + goto release; + + /* And invalidate the previously valid segment by setting + * its signature word (0x13) high_byte to 0b. This can be + * done without an erase because flash erase sets all bits + * to 1's. We can write 1's to 0's without an erase + */ + act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; + + /* offset in words but we read dword*/ + act_offset = old_bank_offset + E1000_ICH_NVM_SIG_WORD - 1; + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword); + + if (ret_val) + goto release; + + dword &= 0x00FFFFFF; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword); + + if (ret_val) + goto release; + + /* Great! Everything worked, we can now clear the cached entries. */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + dev_spec->shadow_ram[i].modified = false; + dev_spec->shadow_ram[i].value = 0xFFFF; + } + +release: + nvm->ops.release(hw); + + /* Reload the EEPROM, or else modifications will not appear + * until after the next adapter reset. + */ + if (!ret_val) { + nvm->ops.reload(hw); + msec_delay(10); + } + +out: + if (ret_val) + DEBUGOUT1("NVM update error: %d\n", ret_val); + + return ret_val; +} + /** * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM * @hw: pointer to the HW structure @@ -3806,6 +4339,7 @@ STATIC s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) */ switch (hw->mac.type) { case e1000_pch_lpt: + case e1000_pch_spt: word = NVM_COMPAT; valid_csum_mask = NVM_COMPAT_VALID_CSUM; break; @@ -3853,8 +4387,13 @@ STATIC s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, DEBUGFUNC("e1000_write_ich8_data"); - if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) - return -E1000_ERR_NVM; + if (hw->mac.type >= e1000_pch_spt) { + if (size != 4 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } else { + if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + hw->nvm.flash_base_addr); @@ -3865,12 +4404,29 @@ STATIC s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, ret_val = e1000_flash_cycle_init_ich8lan(hw); if (ret_val != E1000_SUCCESS) break; - hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); + /* In SPT, This register is in Lan memory space, not + * flash. Therefore, only 32 bit access is supported + */ + if (hw->mac.type >= e1000_pch_spt) + hsflctl.regval = + E1000_READ_FLASH_REG(hw, ICH_FLASH_HSFSTS)>>16; + else + hsflctl.regval = + E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size - 1; hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; - E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); + /* In SPT, This register is in Lan memory space, + * not flash. Therefore, only 32 bit access is + * supported + */ + if (hw->mac.type >= e1000_pch_spt) + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + hsflctl.regval << 16); + else + E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, + hsflctl.regval); E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_addr); @@ -3908,6 +4464,94 @@ STATIC s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, return ret_val; } +/** +* e1000_write_flash_data32_ich8lan - Writes 4 bytes to the NVM +* @hw: pointer to the HW structure +* @offset: The offset (in bytes) of the dwords to read. +* @data: The 4 bytes to write to the NVM. +* +* Writes one/two/four bytes to the NVM using the flash access registers. +**/ +STATIC s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + u32 flash_linear_addr; + s32 ret_val; + u8 count = 0; + + DEBUGFUNC("e1000_write_flash_data32_ich8lan"); + + if (hw->mac.type >= e1000_pch_spt) { + if (offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); + do { + usec_delay(1); + /* Steps */ + ret_val = e1000_flash_cycle_init_ich8lan(hw); + if (ret_val != E1000_SUCCESS) + break; + + /* In SPT, This register is in Lan memory space, not + * flash. Therefore, only 32 bit access is supported + */ + if (hw->mac.type >= e1000_pch_spt) + hsflctl.regval = E1000_READ_FLASH_REG(hw, + ICH_FLASH_HSFSTS) + >> 16; + else + hsflctl.regval = E1000_READ_FLASH_REG16(hw, + ICH_FLASH_HSFCTL); + + hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1; + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; + + /* In SPT, This register is in Lan memory space, + * not flash. Therefore, only 32 bit access is + * supported + */ + if (hw->mac.type >= e1000_pch_spt) + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + hsflctl.regval << 16); + else + E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, + hsflctl.regval); + + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_addr); + + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FDATA0, data); + + /* check if FCERR is set to 1 , if set to 1, clear it + * and try the whole sequence a few more times else done + */ + ret_val = e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_WRITE_COMMAND_TIMEOUT); + + if (ret_val == E1000_SUCCESS) + break; + + /* If we're here, then things are most likely + * completely hosed, but if the error condition + * is detected, it won't hurt to give it another + * try...ICH_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS); + + if (hsfsts.hsf_status.flcerr) + /* Repeat for some time before giving up. */ + continue; + if (!hsfsts.hsf_status.flcdone) { + DEBUGOUT("Timeout error - flash cycle did not complete.\n"); + break; + } + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); + + return ret_val; +} /** * e1000_write_flash_byte_ich8lan - Write a single byte to NVM @@ -3927,7 +4571,42 @@ STATIC s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, return e1000_write_flash_data_ich8lan(hw, offset, 1, word); } +/** +* e1000_retry_write_flash_dword_ich8lan - Writes a dword to NVM +* @hw: pointer to the HW structure +* @offset: The offset of the word to write. +* @dword: The dword to write to the NVM. +* +* Writes a single dword to the NVM using the flash access registers. +* Goes through a retry algorithm before giving up. +**/ +STATIC s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 dword) +{ + s32 ret_val; + u16 program_retries; + DEBUGFUNC("e1000_retry_write_flash_dword_ich8lan"); + + /* Must convert word offset into bytes. */ + offset <<= 1; + + ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword); + + if (!ret_val) + return ret_val; + for (program_retries = 0; program_retries < 100; program_retries++) { + DEBUGOUT2("Retrying Byte %8.8X at offset %u\n", dword, offset); + usec_delay(100); + ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword); + if (ret_val == E1000_SUCCESS) + break; + } + if (program_retries == 100) + return -E1000_ERR_NVM; + + return E1000_SUCCESS; +} /** * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM @@ -4037,12 +4716,22 @@ STATIC s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) /* Write a value 11 (block Erase) in Flash * Cycle field in hw flash control */ - hsflctl.regval = - E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); + if (hw->mac.type >= e1000_pch_spt) + hsflctl.regval = + E1000_READ_FLASH_REG(hw, + ICH_FLASH_HSFSTS)>>16; + else + hsflctl.regval = + E1000_READ_FLASH_REG16(hw, + ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; - E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, - hsflctl.regval); + if (hw->mac.type >= e1000_pch_spt) + E1000_WRITE_FLASH_REG(hw, ICH_FLASH_HSFSTS, + hsflctl.regval << 16); + else + E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, + hsflctl.regval); /* Write the last 24 bits of an index within the * block into Flash Linear address field in Flash @@ -4475,7 +5164,7 @@ STATIC void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) E1000_WRITE_REG(hw, E1000_RFCTL, reg); /* Enable ECC on Lynxpoint */ - if (hw->mac.type == e1000_pch_lpt) { + if (hw->mac.type >= e1000_pch_lpt) { reg = E1000_READ_REG(hw, E1000_PBECCSTS); reg |= E1000_PBECCSTS_ECC_ENABLE; E1000_WRITE_REG(hw, E1000_PBECCSTS, reg); @@ -4907,7 +5596,8 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) || (device_id == E1000_DEV_ID_PCH_I218_LM3) || - (device_id == E1000_DEV_ID_PCH_I218_V3)) { + (device_id == E1000_DEV_ID_PCH_I218_V3) || + (hw->mac.type >= e1000_pch_spt)) { u32 fextnvm6 = E1000_READ_REG(hw, E1000_FEXTNVM6); E1000_WRITE_REG(hw, E1000_FEXTNVM6, diff --git a/drivers/net/e1000/base/e1000_ich8lan.h b/drivers/net/e1000/base/e1000_ich8lan.h index 352b959b8a..50e0e79c98 100644 --- a/drivers/net/e1000/base/e1000_ich8lan.h +++ b/drivers/net/e1000/base/e1000_ich8lan.h @@ -121,6 +121,18 @@ POSSIBILITY OF SUCH DAMAGE. #if !defined(EXTERNAL_RELEASE) || defined(ULP_SUPPORT) #define E1000_FEXTNVM7_DISABLE_SMB_PERST 0x00000020 #endif /* !EXTERNAL_RELEASE || ULP_SUPPORT */ +#define E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS 0x00000800 +#define E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS 0x00001000 +#define E1000_FEXTNVM11_DISABLE_PB_READ 0x00000200 +#define E1000_FEXTNVM11_DISABLE_MULR_FIX 0x00002000 + +/* bit24: RXDCTL thresholds granularity: 0 - cache lines, 1 - descriptors */ +#define E1000_RXDCTL_THRESH_UNIT_DESC 0x01000000 + +#define NVM_SIZE_MULTIPLIER 4096 /*multiplier for NVMS field*/ +#define E1000_FLASH_BASE_ADDR 0xE000 /*offset of NVM access regs*/ +#define E1000_CTRL_EXT_NVMVS 0x3 /*NVM valid sector */ +#define E1000_TARC0_CB_MULTIQ_3_REQ (1 << 28 | 1 << 29) #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/e1000/base/e1000_regs.h b/drivers/net/e1000/base/e1000_regs.h index 84531a99da..364a726156 100644 --- a/drivers/net/e1000/base/e1000_regs.h +++ b/drivers/net/e1000/base/e1000_regs.h @@ -66,6 +66,8 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ #define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */ #define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ +#define E1000_FEXTNVM9 0x5BB4 /* Future Extended NVM 9 - RW */ +#define E1000_FEXTNVM11 0x5BBC /* Future Extended NVM 11 - RW */ #define E1000_PCIEANACFG 0x00F18 /* PCIE Analog Config */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ #define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ @@ -109,6 +111,7 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_PBECCSTS 0x0100C /* Packet Buffer ECC Status - RW */ +#define E1000_IOSFPC 0x00F28 /* TX corrupted data */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ #define E1000_EEMNGCTL_I210 0x01010 /* i210 MNG EEprom Mode Control */ #define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ @@ -591,6 +594,10 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_TIMADJL 0x0B60C /* Time sync time adjustment offset Low - RW */ #define E1000_TIMADJH 0x0B610 /* Time sync time adjustment offset High - RW */ #define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */ +#define E1000_SYSSTMPL 0x0B648 /* HH Timesync system stamp low register */ +#define E1000_SYSSTMPH 0x0B64C /* HH Timesync system stamp hi register */ +#define E1000_PLTSTMPL 0x0B640 /* HH Timesync platform stamp low register */ +#define E1000_PLTSTMPH 0x0B644 /* HH Timesync platform stamp hi register */ #define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */ #define E1000_TSICR 0x0B66C /* Interrupt Cause Register */ #define E1000_TSIM 0x0B674 /* Interrupt Mask Register */