ipsec: reorder packet check for ESP inbound

Right now check for packet length and padding is done inside cop_prepare().
It makes sense to have all necessary checks in one place at early stage:
inside pkt_prepare().
That allows to simplify (and later hopefully) optimize cop_prepare() part.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit is contained in:
Konstantin Ananyev 2019-04-02 09:34:41 +01:00 committed by Akhil Goyal
parent 6015e6a133
commit a41a33c550

View File

@ -18,7 +18,7 @@
/*
* setup crypto op and crypto sym op for ESP inbound tunnel packet.
*/
static inline int32_t
static inline void
inb_cop_prepare(struct rte_crypto_op *cop,
const struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
const union sym_op_data *icv, uint32_t pofs, uint32_t plen)
@ -27,11 +27,7 @@ inb_cop_prepare(struct rte_crypto_op *cop,
struct aead_gcm_iv *gcm;
struct aesctr_cnt_blk *ctr;
uint64_t *ivc, *ivp;
uint32_t algo, clen;
clen = plen - sa->ctp.cipher.length;
if ((int32_t)clen < 0 || (clen & (sa->pad_align - 1)) != 0)
return -EINVAL;
uint32_t algo;
algo = sa->algo_type;
@ -41,7 +37,7 @@ inb_cop_prepare(struct rte_crypto_op *cop,
switch (algo) {
case ALGO_TYPE_AES_GCM:
sop->aead.data.offset = pofs + sa->ctp.cipher.offset;
sop->aead.data.length = clen;
sop->aead.data.length = plen - sa->ctp.cipher.length;
sop->aead.digest.data = icv->va;
sop->aead.digest.phys_addr = icv->pa;
sop->aead.aad.data = icv->va + sa->icv_len;
@ -57,7 +53,7 @@ inb_cop_prepare(struct rte_crypto_op *cop,
case ALGO_TYPE_AES_CBC:
case ALGO_TYPE_3DES_CBC:
sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
sop->cipher.data.length = clen;
sop->cipher.data.length = plen - sa->ctp.cipher.length;
sop->auth.data.offset = pofs + sa->ctp.auth.offset;
sop->auth.data.length = plen - sa->ctp.auth.length;
sop->auth.digest.data = icv->va;
@ -71,7 +67,7 @@ inb_cop_prepare(struct rte_crypto_op *cop,
break;
case ALGO_TYPE_AES_CTR:
sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
sop->cipher.data.length = clen;
sop->cipher.data.length = plen - sa->ctp.cipher.length;
sop->auth.data.offset = pofs + sa->ctp.auth.offset;
sop->auth.data.length = plen - sa->ctp.auth.length;
sop->auth.digest.data = icv->va;
@ -86,17 +82,13 @@ inb_cop_prepare(struct rte_crypto_op *cop,
break;
case ALGO_TYPE_NULL:
sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
sop->cipher.data.length = clen;
sop->cipher.data.length = plen - sa->ctp.cipher.length;
sop->auth.data.offset = pofs + sa->ctp.auth.offset;
sop->auth.data.length = plen - sa->ctp.auth.length;
sop->auth.digest.data = icv->va;
sop->auth.digest.phys_addr = icv->pa;
break;
default:
return -EINVAL;
}
return 0;
}
/*
@ -132,7 +124,7 @@ inb_pkt_prepare(const struct rte_ipsec_sa *sa, const struct replay_sqn *rsn,
{
int32_t rc;
uint64_t sqn;
uint32_t icv_ofs, plen;
uint32_t clen, icv_ofs, plen;
struct rte_mbuf *ml;
struct esp_hdr *esph;
@ -159,6 +151,11 @@ inb_pkt_prepare(const struct rte_ipsec_sa *sa, const struct replay_sqn *rsn,
ml = rte_pktmbuf_lastseg(mb);
icv_ofs = ml->data_len - sa->icv_len + sa->sqh_len;
/* check that packet has a valid length */
clen = plen - sa->ctp.cipher.length;
if ((int32_t)clen < 0 || (clen & (sa->pad_align - 1)) != 0)
return -EBADMSG;
/* we have to allocate space for AAD somewhere,
* right now - just use free trailing space at the last segment.
* Would probably be more convenient to reserve space for AAD
@ -201,21 +198,19 @@ esp_inb_pkt_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
rc = inb_pkt_prepare(sa, rsn, mb[i], hl, &icv);
if (rc >= 0) {
lksd_none_cop_prepare(cop[k], cs, mb[i]);
rc = inb_cop_prepare(cop[k], sa, mb[i], &icv, hl, rc);
}
k += (rc == 0);
if (rc != 0) {
inb_cop_prepare(cop[k], sa, mb[i], &icv, hl, rc);
k++;
} else
dr[i - k] = i;
rte_errno = -rc;
}
}
rsn_release(sa, rsn);
/* copy not prepared mbufs beyond good ones */
if (k != num && k != 0)
if (k != num && k != 0) {
move_bad_mbufs(mb, dr, num, num - k);
rte_errno = EBADMSG;
}
return k;
}