d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

virtio: fix states handling during initialization

Browse Source 
Change order of initialization to match Linux kernel.
Don't blow away control queue by doing reset when stopped.

Calling dev_stop then dev_start would not work.
Dev_stop was calling virtio reset and that would clear all queues
and clear all feature negotiation.
Resolved by only doing reset on device removal.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
This commit is contained in:
Stephen Hemminger 2015-02-09 09:13:58 +08:00 committed by Thomas Monjalon
parent fb9d170496
commit a85786dc81
3 changed files with 35 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
lib/librte_pmd_virtio/virtio_ethdev.c
View File

@ -398,9 +398,15 @@ virtio_dev_cq_queue_setup(struct rte_eth_dev *dev, uint16_t vtpci_queue_idx,
static void
virtio_dev_close(struct rte_eth_dev *dev)
{
struct virtio_hw *hw = dev->data->dev_private;
PMD_INIT_LOG(DEBUG, "virtio_dev_close");
virtio_dev_stop(dev);
/* reset the NIC */
vtpci_irq_config(hw, VIRTIO_MSI_NO_VECTOR);
vtpci_reset(hw);
hw->started = 0;
virtio_dev_free_mbufs(dev);
}
static void
@ -986,6 +992,9 @@ eth_virtio_dev_init(__rte_unused struct eth_driver *eth_drv,
/* Setup interrupt callback */
rte_intr_callback_register(&pci_dev->intr_handle,
virtio_interrupt_handler, eth_dev);
virtio_dev_cq_start(eth_dev);
return 0;
}
@ -1040,7 +1049,6 @@ virtio_dev_configure(struct rte_eth_dev *dev)
{
const struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
struct virtio_hw *hw = dev->data->dev_private;
int ret;
PMD_INIT_LOG(DEBUG, "configure");
@ -1051,11 +1059,12 @@ virtio_dev_configure(struct rte_eth_dev *dev)
hw->vlan_strip = rxmode->hw_vlan_strip;
ret = vtpci_irq_config(hw, 0);
if (ret != 0)
if (vtpci_irq_config(hw, 0) == VIRTIO_MSI_NO_VECTOR) {
PMD_DRV_LOG(ERR, "failed to set config vector");
return -EBUSY;
}
return ret;
return 0;
}
@ -1065,17 +1074,6 @@ virtio_dev_start(struct rte_eth_dev *dev)
uint16_t nb_queues, i;
struct virtio_hw *hw = dev->data->dev_private;
/* Tell the host we've noticed this device. */
vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_ACK);
/* Tell the host we've known how to drive the device. */
vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_DRIVER);
virtio_dev_cq_start(dev);
/* Do final configuration before rx/tx engine starts */
virtio_dev_rxtx_start(dev);
/* check if lsc interrupt feature is enabled */
if (dev->data->dev_conf.intr_conf.lsc) {
if (!vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) {
@ -1092,8 +1090,16 @@ virtio_dev_start(struct rte_eth_dev *dev)
/* Initialize Link state */
virtio_dev_link_update(dev, 0);
/* On restart after stop do not touch queues */
if (hw->started)
return 0;
/* Do final configuration before rx/tx engine starts */
virtio_dev_rxtx_start(dev);
vtpci_reinit_complete(hw);
hw->started = 1;
/*Notify the backend
*Otherwise the tap backend might already stop its queue due to fullness.
*vhost backend will have no chance to be waked up
@ -1164,17 +1170,20 @@ static void virtio_dev_free_mbufs(struct rte_eth_dev *dev)
}
/*
* Stop device: disable rx and tx functions to allow for reconfiguring.
* Stop device: disable interrupt and mark link down
*/
static void
virtio_dev_stop(struct rte_eth_dev *dev)
{
struct virtio_hw *hw = dev->data->dev_private;
struct rte_eth_link link;
/* reset the NIC */
vtpci_irq_config(hw, 0);
vtpci_reset(hw);
virtio_dev_free_mbufs(dev);
PMD_INIT_LOG(DEBUG, "stop");
if (dev->data->dev_conf.intr_conf.lsc)
rte_intr_disable(&dev->pci_dev->intr_handle);
memset(&link, 0, sizeof(link));
virtio_dev_atomic_write_link_status(dev, &link);
}
static int

10
lib/librte_pmd_virtio/virtio_pci.c
View File

@ -139,15 +139,9 @@ vtpci_isr(struct virtio_hw *hw)
/* Enable one vector (0) for Link State Intrerrupt */
int
uint16_t
vtpci_irq_config(struct virtio_hw *hw, uint16_t vec)
{
VIRTIO_WRITE_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR, vec);
vec = VIRTIO_READ_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR);
if (vec == VIRTIO_MSI_NO_VECTOR) {
PMD_DRV_LOG(ERR, "failed to set config vector");
return -EBUSY;
}
return 0;
return VIRTIO_READ_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR);
}

3
lib/librte_pmd_virtio/virtio_pci.h
View File

@ -170,6 +170,7 @@ struct virtio_hw {
uint16_t vtnet_hdr_size;
uint8_t vlan_strip;
uint8_t use_msix;
uint8_t started;
uint8_t mac_addr[ETHER_ADDR_LEN];
};
@ -264,6 +265,6 @@ void vtpci_read_dev_config(struct virtio_hw *, uint64_t, void *, int);
uint8_t vtpci_isr(struct virtio_hw *);
int vtpci_irq_config(struct virtio_hw *, uint16_t);
uint16_t vtpci_irq_config(struct virtio_hw *, uint16_t);
#endif /* _VIRTIO_PCI_H_ */