doc: fix enic guide syntax

Fixes: 211f9a9ce2 ("enic: add guide")
Cc: stable@dpdk.org

Signed-off-by: John Daley <johndale@cisco.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit is contained in:
John Daley 2017-04-26 17:52:42 -07:00 committed by Ferruh Yigit
parent 3c389587ef
commit d4f954b166

View File

@ -1,5 +1,5 @@
.. BSD LICENSE
Copyright (c) 2015, Cisco Systems, Inc.
Copyright (c) 2017, Cisco Systems, Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without
@ -71,9 +71,9 @@ Configuration information
- The number of RQs configured in the vNIC should be greater or
equal to *twice* the value of the expected nb_rx_q parameter in
the call to rte_eth_dev_configure(). With the addition of rx
the call to rte_eth_dev_configure(). With the addition of Rx
scatter, a pair of RQs on the vnic is needed for each receive
queue used by DPDK, even if rx scatter is not being used.
queue used by DPDK, even if Rx scatter is not being used.
Having a vNIC with only 1 RQ is not a valid configuration, and
will fail with an error message.
@ -99,7 +99,7 @@ Configuration information
gives the application the greatest amount of flexibility in its
queue configuration.
- *Note*: Since the introduction of rx scatter, for performance
- *Note*: Since the introduction of Rx scatter, for performance
reasons, this PMD uses two RQs on the vNIC per receive queue in
DPDK. One RQ holds descriptors for the start of a packet the
second RQ holds the descriptors for the rest of the fragments of
@ -135,7 +135,7 @@ of the server.
With advanced filters, perfect matching of all fields of IPv4, IPv6 headers
as well as TCP, UDP and SCTP L4 headers is available through flow director.
Masking of these feilds for partial match is also supported.
Masking of these fields for partial match is also supported.
Without advanced filter support, the flow director is limited to IPv4
perfect filtering of the 5-tuple with no masking of fields supported.
@ -190,7 +190,7 @@ Alternatively, the configuration can be done in a separate file using the
``network`` keyword. These methods are described in the libvirt documentation for
`Network XML format <https://libvirt.org/formatnetwork.html>`_.
When the VM instance is started, the enic KVM driver will bind the host VF to
When the VM instance is started, the ENIC KVM driver will bind the host VF to
vfio, complete provisioning on the FI and bring up the link.
.. note::
@ -251,22 +251,24 @@ Limitations
to Fabric Interconnects. It is not on standalone C-Series servers.
- VF devices are not usable directly from the host. They can only be used
as assigned devices on VM instances.
- Currently, unbind of the enic kernel mode driver 'enic' on the VM instance
may hang. As a workaround, enic.ko should blacklisted or removed from the
boot process.
- Currently, unbind of the ENIC kernel mode driver 'enic.ko' on the VM
instance may hang. As a workaround, enic.ko should blacklisted or removed
from the boot process.
- pci_generic cannot be used as the uio module in the VM. igb_uio or
vfio in non-IOMMU mode can be used.
- The number of RQs in UCSM dynamic vNIC configurations must be at least 2.
- The number of SR-IOV devices is limited to 256. Components on target system
might limit this number to fewer than 256.
How to build the suite
----------------------
How to build the suite?
-----------------------
The build instructions for the DPDK suite should be followed. By default
the ENIC PMD library will be built into the DPDK library.
Refer to the document :ref:`compiling and testing a PMD for a NIC
<pmd_build_and_test>` for details.
For configuring and using UIO and VFIO frameworks, please refer the
By default the ENIC PMD library will be built into the DPDK library.
For configuring and using UIO and VFIO frameworks, please refer to the
documentation that comes with DPDK suite.
Supported Cisco VIC adapters
@ -288,11 +290,13 @@ ENIC PMD supports all recent generations of Cisco VIC adapters including:
Supported Operating Systems
---------------------------
Any Linux distribution fulfilling the conditions described in Dependencies
section of DPDK documentation.
Supported features
------------------
- Unicast, multicast and broadcast transmission and reception
- Receive queue polling
- Port Hardware Statistics
@ -310,8 +314,9 @@ Supported features
- MTU update
- SR-IOV on UCS managed servers connected to Fabric Interconnects.
Known bugs and Unsupported features in this release
Known bugs and unsupported features in this release
---------------------------------------------------
- Signature or flex byte based flow direction
- Drop feature of flow direction
- VLAN based flow direction
@ -322,6 +327,7 @@ Known bugs and Unsupported features in this release
Prerequisites
-------------
- Prepare the system as recommended by DPDK suite. This includes environment
variables, hugepages configuration, tool-chains and configuration
- Insert vfio-pci kernel module using the command 'modprobe vfio-pci' if the
@ -331,9 +337,8 @@ Prerequisites
- DPDK suite should be configured based on the user's decision to use VFIO or
UIO framework
- If the vNIC device(s) to be used is bound to the kernel mode Ethernet driver
(enic), use 'ifconfig' to bring the interface down. The dpdk-devbind.py tool
can then be used to unbind the device's bus id from the enic kernel mode
driver.
use 'ifconfig' to bring the interface down. The dpdk-devbind.py tool can
then be used to unbind the device's bus id from the ENIC kernel mode driver.
- Bind the intended vNIC to vfio-pci in case the user wants ENIC PMD to use
VFIO framework using dpdk-devbind.py.
- Bind the intended vNIC to igb_uio in case the user wants ENIC PMD to use
@ -364,10 +369,12 @@ libraries and the initialization time of the application.
Additional Reference
--------------------
- http://www.cisco.com/c/en/us/products/servers-unified-computing
Contact Information
-------------------
Any questions or bugs should be reported to DPDK community and to the ENIC PMD
maintainers: