From ea6b39b5b847655cf65f283d3cc25d7ab629d039 Mon Sep 17 00:00:00 2001 From: Ferruh Yigit Date: Fri, 24 May 2019 17:55:20 +0100 Subject: [PATCH] kni: remove ethtool support Current design requires kernel drivers and they need to be probed by Linux up to some level so that they can be usable by DPDK for ethtool support, this requires maintaining the Linux drivers in DPDK. Also ethtool support is limited and hard, if not impossible, to expand to other PMDs. Since KNI ethtool support is not used commonly, if not used at all, removing the support for the sake of simplicity and maintenance. Signed-off-by: Ferruh Yigit Acked-by: Stephen Hemminger Acked-by: Neil Horman Acked-by: Thomas Monjalon --- config/common_base | 1 - doc/guides/rel_notes/deprecation.rst | 9 - doc/guides/rel_notes/release_19_08.rst | 2 + .../sample_app_ug/kernel_nic_interface.rst | 10 - examples/kni/main.c | 9 - kernel/linux/kni/Kbuild | 4 +- kernel/linux/kni/Makefile | 26 +- kernel/linux/kni/ethtool/README | 71 - kernel/linux/kni/ethtool/igb/e1000_82575.c | 3650 ------ kernel/linux/kni/ethtool/igb/e1000_82575.h | 494 - kernel/linux/kni/ethtool/igb/e1000_api.c | 1144 -- kernel/linux/kni/ethtool/igb/e1000_api.h | 142 - kernel/linux/kni/ethtool/igb/e1000_defines.h | 1365 -- kernel/linux/kni/ethtool/igb/e1000_hw.h | 778 -- kernel/linux/kni/ethtool/igb/e1000_i210.c | 894 -- kernel/linux/kni/ethtool/igb/e1000_i210.h | 76 - kernel/linux/kni/ethtool/igb/e1000_mac.c | 2081 ---- kernel/linux/kni/ethtool/igb/e1000_mac.h | 65 - kernel/linux/kni/ethtool/igb/e1000_manage.c | 539 - kernel/linux/kni/ethtool/igb/e1000_manage.h | 74 - kernel/linux/kni/ethtool/igb/e1000_mbx.c | 510 - kernel/linux/kni/ethtool/igb/e1000_mbx.h | 72 - kernel/linux/kni/ethtool/igb/e1000_nvm.c | 950 -- kernel/linux/kni/ethtool/igb/e1000_nvm.h | 60 - kernel/linux/kni/ethtool/igb/e1000_osdep.h | 121 - kernel/linux/kni/ethtool/igb/e1000_phy.c | 3392 ----- kernel/linux/kni/ethtool/igb/e1000_phy.h | 241 - kernel/linux/kni/ethtool/igb/e1000_regs.h | 631 - kernel/linux/kni/ethtool/igb/igb.h | 844 -- kernel/linux/kni/ethtool/igb/igb_ethtool.c | 2851 ----- kernel/linux/kni/ethtool/igb/igb_main.c | 10355 ---------------- kernel/linux/kni/ethtool/igb/igb_param.c | 832 -- kernel/linux/kni/ethtool/igb/igb_regtest.h | 234 - kernel/linux/kni/ethtool/igb/igb_vmdq.c | 421 - kernel/linux/kni/ethtool/igb/igb_vmdq.h | 31 - kernel/linux/kni/ethtool/igb/kcompat.h | 3956 ------ kernel/linux/kni/ethtool/igb/meson.build | 16 - kernel/linux/kni/ethtool/ixgbe/ixgbe.h | 912 -- kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c | 1281 -- kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h | 29 - kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c | 2299 ---- kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h | 43 - kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c | 1142 -- kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h | 153 - kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c | 4067 ------ kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h | 125 - kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h | 153 - .../linux/kni/ethtool/ixgbe/ixgbe_ethtool.c | 2894 ----- kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h | 76 - kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c | 2951 ----- kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h | 90 - kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h | 117 - kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c | 1832 --- kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h | 122 - kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h | 3239 ----- kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c | 922 -- kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h | 43 - kernel/linux/kni/ethtool/ixgbe/kcompat.c | 1231 -- kernel/linux/kni/ethtool/ixgbe/kcompat.h | 3144 ----- kernel/linux/kni/ethtool/ixgbe/meson.build | 13 - kernel/linux/kni/ethtool/meson.build | 5 - kernel/linux/kni/kni_dev.h | 8 - kernel/linux/kni/kni_ethtool.c | 229 - kernel/linux/kni/kni_misc.c | 82 +- kernel/linux/kni/meson.build | 9 +- lib/librte_kni/rte_kni.c | 5 - lib/librte_kni/rte_kni.h | 4 +- 67 files changed, 17 insertions(+), 64154 deletions(-) delete mode 100644 kernel/linux/kni/ethtool/README delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_82575.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_82575.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_api.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_api.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_defines.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_hw.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_i210.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_i210.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mac.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mac.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_manage.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_manage.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mbx.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mbx.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_nvm.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_nvm.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_osdep.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_phy.c delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_phy.h delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_regs.h delete mode 100644 kernel/linux/kni/ethtool/igb/igb.h delete mode 100644 kernel/linux/kni/ethtool/igb/igb_ethtool.c delete mode 100644 kernel/linux/kni/ethtool/igb/igb_main.c delete mode 100644 kernel/linux/kni/ethtool/igb/igb_param.c delete mode 100644 kernel/linux/kni/ethtool/igb/igb_regtest.h delete mode 100644 kernel/linux/kni/ethtool/igb/igb_vmdq.c delete mode 100644 kernel/linux/kni/ethtool/igb/igb_vmdq.h delete mode 100644 kernel/linux/kni/ethtool/igb/kcompat.h delete mode 100644 kernel/linux/kni/ethtool/igb/meson.build delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/kcompat.c delete mode 100644 kernel/linux/kni/ethtool/ixgbe/kcompat.h delete mode 100644 kernel/linux/kni/ethtool/ixgbe/meson.build delete mode 100644 kernel/linux/kni/ethtool/meson.build delete mode 100644 kernel/linux/kni/kni_ethtool.c diff --git a/config/common_base b/config/common_base index 6b96e0e80c..6f19ad5d21 100644 --- a/config/common_base +++ b/config/common_base @@ -942,7 +942,6 @@ CONFIG_RTE_PIPELINE_STATS_COLLECT=n CONFIG_RTE_LIBRTE_KNI=n CONFIG_RTE_LIBRTE_PMD_KNI=n CONFIG_RTE_KNI_KMOD=n -CONFIG_RTE_KNI_KMOD_ETHTOOL=n CONFIG_RTE_KNI_PREEMPT_DEFAULT=y # diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 7e2dcb7692..e2721fad69 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -62,15 +62,6 @@ Deprecation Notices Target release for removal of the legacy API will be defined once most PMDs have switched to rte_flow. -* kni: remove KNI ethtool support. To clarify, this is not to remove the KNI, - but only to remove ethtool support of it that is disabled by default and - can be enabled via ``CONFIG_RTE_KNI_KMOD_ETHTOOL`` config option. - Existing KNI ethtool implementation is only supported by ``igb`` & ``ixgbe`` - drivers, by using a copy of kernel drivers in DPDK. This model cannot be - extended to all drivers in DPDK and it is too much effort to maintain - kernel modules in DPDK. As a result users won't be able to use ``ethtool`` - via ``igb`` & ``ixgbe`` anymore. - * cryptodev: New member in ``rte_cryptodev_config`` to allow applications to disable features supported by the crypto device. Only the following features would be allowed to be disabled this way, diff --git a/doc/guides/rel_notes/release_19_08.rst b/doc/guides/rel_notes/release_19_08.rst index 5ebb564b10..a17e7dea51 100644 --- a/doc/guides/rel_notes/release_19_08.rst +++ b/doc/guides/rel_notes/release_19_08.rst @@ -67,6 +67,8 @@ Removed Items Also, make sure to start the actual text at the margin. ========================================================= +* Removed KNI ethtool, CONFIG_RTE_KNI_KMOD_ETHTOOL, support. + API Changes ----------- diff --git a/doc/guides/sample_app_ug/kernel_nic_interface.rst b/doc/guides/sample_app_ug/kernel_nic_interface.rst index f8fe17bd08..a7e549d521 100644 --- a/doc/guides/sample_app_ug/kernel_nic_interface.rst +++ b/doc/guides/sample_app_ug/kernel_nic_interface.rst @@ -262,16 +262,6 @@ Change the MTU size: # ifconfig vEth0_0 mtu 1450 -If DPDK is compiled with ``CONFIG_RTE_KNI_KMOD_ETHTOOL=y`` and an Intel -NIC is used, the user can use ``ethtool`` on the KNI interface as if it -were a normal Linux kernel interface. - -Displaying the NIC registers: - -.. code-block:: console - - # ethtool -d vEth0_0 - When the ``kni`` application is closed, all the KNI interfaces are deleted from the Linux kernel. diff --git a/examples/kni/main.c b/examples/kni/main.c index a4d598bb7b..4710d71769 100644 --- a/examples/kni/main.c +++ b/examples/kni/main.c @@ -897,19 +897,10 @@ kni_alloc(uint16_t port_id) if (i == 0) { struct rte_kni_ops ops; struct rte_eth_dev_info dev_info; - const struct rte_pci_device *pci_dev; - const struct rte_bus *bus = NULL; memset(&dev_info, 0, sizeof(dev_info)); rte_eth_dev_info_get(port_id, &dev_info); - if (dev_info.device) - bus = rte_bus_find_by_device(dev_info.device); - if (bus && !strcmp(bus->name, "pci")) { - pci_dev = RTE_DEV_TO_PCI(dev_info.device); - conf.addr = pci_dev->addr; - conf.id = pci_dev->id; - } /* Get the interface default mac address */ rte_eth_macaddr_get(port_id, (struct rte_ether_addr *)&conf.mac_addr); diff --git a/kernel/linux/kni/Kbuild b/kernel/linux/kni/Kbuild index de5c27f328..e5452d6c00 100644 --- a/kernel/linux/kni/Kbuild +++ b/kernel/linux/kni/Kbuild @@ -3,6 +3,4 @@ ccflags-y := $(MODULE_CFLAGS) obj-m := rte_kni.o -rte_kni-y := $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/*.c)) \ - $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/ethtool/ixgbe/*.c)) \ - $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/ethtool/igb/*.c)) +rte_kni-y := $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/*.c)) diff --git a/kernel/linux/kni/Makefile b/kernel/linux/kni/Makefile index 282be7b683..595bac2612 100644 --- a/kernel/linux/kni/Makefile +++ b/kernel/linux/kni/Makefile @@ -12,7 +12,7 @@ MODULE = rte_kni # CFLAGS # MODULE_CFLAGS += -I$(SRCDIR) --param max-inline-insns-single=50 -MODULE_CFLAGS += -I$(RTE_OUTPUT)/include -I$(SRCDIR)/ethtool/ixgbe -I$(SRCDIR)/ethtool/igb +MODULE_CFLAGS += -I$(RTE_OUTPUT)/include MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h MODULE_CFLAGS += -Wall -Werror @@ -30,29 +30,5 @@ endif # SRCS-y := kni_misc.c SRCS-y += kni_net.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += kni_ethtool.c - -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_main.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_api.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_common.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_ethtool.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82599.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82598.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_x540.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_phy.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/kcompat.c - -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_82575.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_i210.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_api.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mac.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_manage.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mbx.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_nvm.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_phy.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_ethtool.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_main.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_param.c -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_vmdq.c include $(RTE_SDK)/mk/rte.module.mk diff --git a/kernel/linux/kni/ethtool/README b/kernel/linux/kni/ethtool/README deleted file mode 100644 index af36738ade..0000000000 --- a/kernel/linux/kni/ethtool/README +++ /dev/null @@ -1,71 +0,0 @@ -.. SPDX-License-Identifier: BSD-3-Clause - Copyright(c) 2010-2014 Intel Corporation. - -Description - -In order to support ethtool in Kernel NIC Interface, the standard Linux kernel -drivers of ixgbe/igb are needed to be reused here. ixgbe-3.9.17 is the version -modified from in kernel NIC interface kernel module to support ixgbe NIC, and -igb-3.4.8 is the version modified from in kernel NIC interface kernel module to -support igb NIC. - -The source code package of ixgbe can be downloaded from sourceforge.net as below. -http://sourceforge.net/projects/e1000/files/ixgbe%20stable/ -Below source files are copied or modified from ixgbe. - -ixgbe_82598.h -ixgbe_82599.c -ixgbe_82599.h -ixgbe_api.c -ixgbe_api.h -ixgbe_common.c -ixgbe_common.h -ixgbe_dcb.h -ixgbe_ethtool.c -ixgbe_fcoe.h -ixgbe.h -ixgbe_main.c -ixgbe_mbx.h -ixgbe_osdep.h -ixgbe_phy.c -ixgbe_phy.h -ixgbe_sriov.h -ixgbe_type.h -kcompat.c -kcompat.h - -The source code package of igb can be downloaded from sourceforge.net as below. -http://sourceforge.net/projects/e1000/files/igb%20stable/ -Below source files are copied or modified from igb. - -e1000_82575.c -e1000_82575.h -e1000_api.c -e1000_api.h -e1000_defines.h -e1000_hw.h -e1000_mac.c -e1000_mac.h -e1000_manage.c -e1000_manage.h -e1000_mbx.c -e1000_mbx.h -e1000_nvm.c -e1000_nvm.h -e1000_osdep.h -e1000_phy.c -e1000_phy.h -e1000_regs.h -igb_ethtool.c -igb.h -igb_main.c -igb_param.c -igb_procfs.c -igb_regtest.h -igb_sysfs.c -igb_vmdq.c -igb_vmdq.h -kcompat.c -kcompat_ethtool.c -kcompat.h - diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.c b/kernel/linux/kni/ethtool/igb/e1000_82575.c deleted file mode 100644 index 98346709d2..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_82575.c +++ /dev/null @@ -1,3650 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/* - * 82575EB Gigabit Network Connection - * 82575EB Gigabit Backplane Connection - * 82575GB Gigabit Network Connection - * 82576 Gigabit Network Connection - * 82576 Quad Port Gigabit Mezzanine Adapter - * 82580 Gigabit Network Connection - * I350 Gigabit Network Connection - */ - -#include "e1000_api.h" -#include "e1000_i210.h" - -static s32 e1000_init_phy_params_82575(struct e1000_hw *hw); -static s32 e1000_init_mac_params_82575(struct e1000_hw *hw); -static s32 e1000_acquire_phy_82575(struct e1000_hw *hw); -static void e1000_release_phy_82575(struct e1000_hw *hw); -static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw); -static void e1000_release_nvm_82575(struct e1000_hw *hw); -static s32 e1000_check_for_link_82575(struct e1000_hw *hw); -static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw); -static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw); -static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16 *duplex); -static s32 e1000_init_hw_82575(struct e1000_hw *hw); -static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw); -static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 *data); -static s32 e1000_reset_hw_82575(struct e1000_hw *hw); -static s32 e1000_reset_hw_82580(struct e1000_hw *hw); -static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, - u32 offset, u16 *data); -static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, - u32 offset, u16 data); -static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, - bool active); -static s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, - bool active); -static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, - bool active); -static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw); -static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw); -static s32 e1000_get_media_type_82575(struct e1000_hw *hw); -static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw); -static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data); -static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, - u32 offset, u16 data); -static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw); -static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask); -static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16 *speed, u16 *duplex); -static s32 e1000_get_phy_id_82575(struct e1000_hw *hw); -static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask); -static bool e1000_sgmii_active_82575(struct e1000_hw *hw); -static s32 e1000_reset_init_script_82575(struct e1000_hw *hw); -static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw); -static void e1000_config_collision_dist_82575(struct e1000_hw *hw); -static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw); -static void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw); -static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw); -static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw); -static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw); -static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw); -static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw); -static s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, - u16 offset); -static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, - u16 offset); -static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw); -static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw); -static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value); -static void e1000_clear_vfta_i350(struct e1000_hw *hw); - -static void e1000_i2c_start(struct e1000_hw *hw); -static void e1000_i2c_stop(struct e1000_hw *hw); -static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data); -static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data); -static s32 e1000_get_i2c_ack(struct e1000_hw *hw); -static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data); -static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data); -static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); -static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); -static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data); -static bool e1000_get_i2c_data(u32 *i2cctl); - -static const u16 e1000_82580_rxpbs_table[] = { - 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 }; -#define E1000_82580_RXPBS_TABLE_SIZE \ - (sizeof(e1000_82580_rxpbs_table)/sizeof(u16)) - - -/** - * e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO - * @hw: pointer to the HW structure - * - * Called to determine if the I2C pins are being used for I2C or as an - * external MDIO interface since the two options are mutually exclusive. - **/ -static bool e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw) -{ - u32 reg = 0; - bool ext_mdio = false; - - DEBUGFUNC("e1000_sgmii_uses_mdio_82575"); - - switch (hw->mac.type) { - case e1000_82575: - case e1000_82576: - reg = E1000_READ_REG(hw, E1000_MDIC); - ext_mdio = !!(reg & E1000_MDIC_DEST); - break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - reg = E1000_READ_REG(hw, E1000_MDICNFG); - ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO); - break; - default: - break; - } - return ext_mdio; -} - -/** - * e1000_init_phy_params_82575 - Init PHY func ptrs. - * @hw: pointer to the HW structure - **/ -static s32 e1000_init_phy_params_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 ctrl_ext; - - DEBUGFUNC("e1000_init_phy_params_82575"); - - phy->ops.read_i2c_byte = e1000_read_i2c_byte_generic; - phy->ops.write_i2c_byte = e1000_write_i2c_byte_generic; - - if (hw->phy.media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; - goto out; - } - - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_82575; - - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; - - phy->ops.acquire = e1000_acquire_phy_82575; - phy->ops.check_reset_block = e1000_check_reset_block_generic; - phy->ops.commit = e1000_phy_sw_reset_generic; - phy->ops.get_cfg_done = e1000_get_cfg_done_82575; - phy->ops.release = e1000_release_phy_82575; - - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - - if (e1000_sgmii_active_82575(hw)) { - phy->ops.reset = e1000_phy_hw_reset_sgmii_82575; - ctrl_ext |= E1000_CTRL_I2C_ENA; - } else { - phy->ops.reset = e1000_phy_hw_reset_generic; - ctrl_ext &= ~E1000_CTRL_I2C_ENA; - } - - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - e1000_reset_mdicnfg_82580(hw); - - if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575; - phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575; - } else { - switch (hw->mac.type) { - case e1000_82580: - case e1000_i350: - case e1000_i354: - phy->ops.read_reg = e1000_read_phy_reg_82580; - phy->ops.write_reg = e1000_write_phy_reg_82580; - break; - case e1000_i210: - case e1000_i211: - phy->ops.read_reg = e1000_read_phy_reg_gs40g; - phy->ops.write_reg = e1000_write_phy_reg_gs40g; - break; - default: - phy->ops.read_reg = e1000_read_phy_reg_igp; - phy->ops.write_reg = e1000_write_phy_reg_igp; - } - } - - /* Set phy->phy_addr and phy->id. */ - ret_val = e1000_get_phy_id_82575(hw); - - /* Verify phy id and set remaining function pointers */ - switch (phy->id) { - case M88E1543_E_PHY_ID: - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1340M_E_PHY_ID: - case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.get_info = e1000_get_phy_info_m88; - if (phy->id == I347AT4_E_PHY_ID || - phy->id == M88E1112_E_PHY_ID || - phy->id == M88E1340M_E_PHY_ID) - phy->ops.get_cable_length = - e1000_get_cable_length_m88_gen2; - else if (phy->id == M88E1543_E_PHY_ID) - phy->ops.get_cable_length = - e1000_get_cable_length_m88_gen2; - else - phy->ops.get_cable_length = e1000_get_cable_length_m88; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; - /* Check if this PHY is configured for media swap. */ - if (phy->id == M88E1112_E_PHY_ID) { - u16 data; - - ret_val = phy->ops.write_reg(hw, - E1000_M88E1112_PAGE_ADDR, - 2); - if (ret_val) - goto out; - - ret_val = phy->ops.read_reg(hw, - E1000_M88E1112_MAC_CTRL_1, - &data); - if (ret_val) - goto out; - - data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >> - E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT; - if (data == E1000_M88E1112_AUTO_COPPER_SGMII || - data == E1000_M88E1112_AUTO_COPPER_BASEX) - hw->mac.ops.check_for_link = - e1000_check_for_link_media_swap; - } - break; - case IGP03E1000_E_PHY_ID: - case IGP04E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->ops.check_polarity = e1000_check_polarity_igp; - phy->ops.get_info = e1000_get_phy_info_igp; - phy->ops.get_cable_length = e1000_get_cable_length_igp_2; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic; - break; - case I82580_I_PHY_ID: - case I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.check_polarity = e1000_check_polarity_82577; - phy->ops.force_speed_duplex = - e1000_phy_force_speed_duplex_82577; - phy->ops.get_cable_length = e1000_get_cable_length_82577; - phy->ops.get_info = e1000_get_phy_info_82577; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; - break; - case I210_I_PHY_ID: - phy->type = e1000_phy_i210; - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.get_info = e1000_get_phy_info_m88; - phy->ops.get_cable_length = e1000_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; - break; - default: - ret_val = -E1000_ERR_PHY; - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_init_nvm_params_82575 - Init NVM func ptrs. - * @hw: pointer to the HW structure - **/ -s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - u16 size; - - DEBUGFUNC("e1000_init_nvm_params_82575"); - - size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); - /* - * Added to a constant, "size" becomes the left-shift value - * for setting word_size. - */ - size += NVM_WORD_SIZE_BASE_SHIFT; - - /* Just in case size is out of range, cap it to the largest - * EEPROM size supported - */ - if (size > 15) - size = 15; - - nvm->word_size = 1 << size; - if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; - - switch (nvm->override) { - case e1000_nvm_override_spi_large: - nvm->page_size = 32; - nvm->address_bits = 16; - break; - case e1000_nvm_override_spi_small: - nvm->page_size = 8; - nvm->address_bits = 8; - break; - default: - nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? - 16 : 8; - break; - } - if (nvm->word_size == (1 << 15)) - nvm->page_size = 128; - - nvm->type = e1000_nvm_eeprom_spi; - } else { - nvm->type = e1000_nvm_flash_hw; - } - - /* Function Pointers */ - nvm->ops.acquire = e1000_acquire_nvm_82575; - nvm->ops.release = e1000_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = e1000_read_nvm_eerd; - else - nvm->ops.read = e1000_read_nvm_spi; - - nvm->ops.write = e1000_write_nvm_spi; - nvm->ops.validate = e1000_validate_nvm_checksum_generic; - nvm->ops.update = e1000_update_nvm_checksum_generic; - nvm->ops.valid_led_default = e1000_valid_led_default_82575; - - /* override generic family function pointers for specific descendants */ - switch (hw->mac.type) { - case e1000_82580: - nvm->ops.validate = e1000_validate_nvm_checksum_82580; - nvm->ops.update = e1000_update_nvm_checksum_82580; - break; - case e1000_i350: - //case e1000_i354: - nvm->ops.validate = e1000_validate_nvm_checksum_i350; - nvm->ops.update = e1000_update_nvm_checksum_i350; - break; - default: - break; - } - - return E1000_SUCCESS; -} - -/** - * e1000_init_mac_params_82575 - Init MAC func ptrs. - * @hw: pointer to the HW structure - **/ -static s32 e1000_init_mac_params_82575(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - - DEBUGFUNC("e1000_init_mac_params_82575"); - - /* Derives media type */ - e1000_get_media_type_82575(hw); - /* Set mta register count */ - mac->mta_reg_count = 128; - /* Set uta register count */ - mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128; - /* Set rar entry count */ - mac->rar_entry_count = E1000_RAR_ENTRIES_82575; - if (mac->type == e1000_82576) - mac->rar_entry_count = E1000_RAR_ENTRIES_82576; - if (mac->type == e1000_82580) - mac->rar_entry_count = E1000_RAR_ENTRIES_82580; - if (mac->type == e1000_i350 || mac->type == e1000_i354) - mac->rar_entry_count = E1000_RAR_ENTRIES_I350; - - /* Enable EEE default settings for EEE supported devices */ - if (mac->type >= e1000_i350) - dev_spec->eee_disable = false; - - /* Allow a single clear of the SW semaphore on I210 and newer */ - if (mac->type >= e1000_i210) - dev_spec->clear_semaphore_once = true; - - /* Set if part includes ASF firmware */ - mac->asf_firmware_present = true; - /* FWSM register */ - mac->has_fwsm = true; - /* ARC supported; valid only if manageability features are enabled. */ - mac->arc_subsystem_valid = - !!(E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK); - - /* Function pointers */ - - /* bus type/speed/width */ - mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic; - /* reset */ - if (mac->type >= e1000_82580) - mac->ops.reset_hw = e1000_reset_hw_82580; - else - mac->ops.reset_hw = e1000_reset_hw_82575; - /* hw initialization */ - mac->ops.init_hw = e1000_init_hw_82575; - /* link setup */ - mac->ops.setup_link = e1000_setup_link_generic; - /* physical interface link setup */ - mac->ops.setup_physical_interface = - (hw->phy.media_type == e1000_media_type_copper) - ? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575; - /* physical interface shutdown */ - mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575; - /* physical interface power up */ - mac->ops.power_up_serdes = e1000_power_up_serdes_link_82575; - /* check for link */ - mac->ops.check_for_link = e1000_check_for_link_82575; - /* read mac address */ - mac->ops.read_mac_addr = e1000_read_mac_addr_82575; - /* configure collision distance */ - mac->ops.config_collision_dist = e1000_config_collision_dist_82575; - /* multicast address update */ - mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic; - if (hw->mac.type == e1000_i350 || mac->type == e1000_i354) { - /* writing VFTA */ - mac->ops.write_vfta = e1000_write_vfta_i350; - /* clearing VFTA */ - mac->ops.clear_vfta = e1000_clear_vfta_i350; - } else { - /* writing VFTA */ - mac->ops.write_vfta = e1000_write_vfta_generic; - /* clearing VFTA */ - mac->ops.clear_vfta = e1000_clear_vfta_generic; - } - if (hw->mac.type >= e1000_82580) - mac->ops.validate_mdi_setting = - e1000_validate_mdi_setting_crossover_generic; - /* ID LED init */ - mac->ops.id_led_init = e1000_id_led_init_generic; - /* blink LED */ - mac->ops.blink_led = e1000_blink_led_generic; - /* setup LED */ - mac->ops.setup_led = e1000_setup_led_generic; - /* cleanup LED */ - mac->ops.cleanup_led = e1000_cleanup_led_generic; - /* turn on/off LED */ - mac->ops.led_on = e1000_led_on_generic; - mac->ops.led_off = e1000_led_off_generic; - /* clear hardware counters */ - mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575; - /* link info */ - mac->ops.get_link_up_info = e1000_get_link_up_info_82575; - /* get thermal sensor data */ - mac->ops.get_thermal_sensor_data = - e1000_get_thermal_sensor_data_generic; - mac->ops.init_thermal_sensor_thresh = - e1000_init_thermal_sensor_thresh_generic; - /* acquire SW_FW sync */ - mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575; - mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575; - if (mac->type >= e1000_i210) { - mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210; - mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210; - } - - /* set lan id for port to determine which phy lock to use */ - hw->mac.ops.set_lan_id(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_init_function_pointers_82575 - Init func ptrs. - * @hw: pointer to the HW structure - * - * Called to initialize all function pointers and parameters. - **/ -void e1000_init_function_pointers_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_init_function_pointers_82575"); - - hw->mac.ops.init_params = e1000_init_mac_params_82575; - hw->nvm.ops.init_params = e1000_init_nvm_params_82575; - hw->phy.ops.init_params = e1000_init_phy_params_82575; - hw->mbx.ops.init_params = e1000_init_mbx_params_pf; -} - -/** - * e1000_acquire_phy_82575 - Acquire rights to access PHY - * @hw: pointer to the HW structure - * - * Acquire access rights to the correct PHY. - **/ -static s32 e1000_acquire_phy_82575(struct e1000_hw *hw) -{ - u16 mask = E1000_SWFW_PHY0_SM; - - DEBUGFUNC("e1000_acquire_phy_82575"); - - if (hw->bus.func == E1000_FUNC_1) - mask = E1000_SWFW_PHY1_SM; - else if (hw->bus.func == E1000_FUNC_2) - mask = E1000_SWFW_PHY2_SM; - else if (hw->bus.func == E1000_FUNC_3) - mask = E1000_SWFW_PHY3_SM; - - return hw->mac.ops.acquire_swfw_sync(hw, mask); -} - -/** - * e1000_release_phy_82575 - Release rights to access PHY - * @hw: pointer to the HW structure - * - * A wrapper to release access rights to the correct PHY. - **/ -static void e1000_release_phy_82575(struct e1000_hw *hw) -{ - u16 mask = E1000_SWFW_PHY0_SM; - - DEBUGFUNC("e1000_release_phy_82575"); - - if (hw->bus.func == E1000_FUNC_1) - mask = E1000_SWFW_PHY1_SM; - else if (hw->bus.func == E1000_FUNC_2) - mask = E1000_SWFW_PHY2_SM; - else if (hw->bus.func == E1000_FUNC_3) - mask = E1000_SWFW_PHY3_SM; - - hw->mac.ops.release_swfw_sync(hw, mask); -} - -/** - * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the PHY register at offset using the serial gigabit media independent - * interface and stores the retrieved information in data. - **/ -static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 *data) -{ - s32 ret_val = -E1000_ERR_PARAM; - - DEBUGFUNC("e1000_read_phy_reg_sgmii_82575"); - - if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - DEBUGOUT1("PHY Address %u is out of range\n", offset); - goto out; - } - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_read_phy_reg_i2c(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Writes the data to PHY register at the offset using the serial gigabit - * media independent interface. - **/ -static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 data) -{ - s32 ret_val = -E1000_ERR_PARAM; - - DEBUGFUNC("e1000_write_phy_reg_sgmii_82575"); - - if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - DEBUGOUT1("PHY Address %d is out of range\n", offset); - goto out; - } - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_write_phy_reg_i2c(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_get_phy_id_82575 - Retrieve PHY addr and id - * @hw: pointer to the HW structure - * - * Retrieves the PHY address and ID for both PHY's which do and do not use - * sgmi interface. - **/ -static s32 e1000_get_phy_id_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_id; - u32 ctrl_ext; - u32 mdic; - - DEBUGFUNC("e1000_get_phy_id_82575"); - - /* i354 devices can have a PHY that needs an extra read for id */ - if (hw->mac.type == e1000_i354) - e1000_get_phy_id(hw); - - - /* - * For SGMII PHYs, we try the list of possible addresses until - * we find one that works. For non-SGMII PHYs - * (e.g. integrated copper PHYs), an address of 1 should - * work. The result of this function should mean phy->phy_addr - * and phy->id are set correctly. - */ - if (!e1000_sgmii_active_82575(hw)) { - phy->addr = 1; - ret_val = e1000_get_phy_id(hw); - goto out; - } - - if (e1000_sgmii_uses_mdio_82575(hw)) { - switch (hw->mac.type) { - case e1000_82575: - case e1000_82576: - mdic = E1000_READ_REG(hw, E1000_MDIC); - mdic &= E1000_MDIC_PHY_MASK; - phy->addr = mdic >> E1000_MDIC_PHY_SHIFT; - break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - mdic = E1000_READ_REG(hw, E1000_MDICNFG); - mdic &= E1000_MDICNFG_PHY_MASK; - phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT; - break; - default: - ret_val = -E1000_ERR_PHY; - goto out; - break; - } - ret_val = e1000_get_phy_id(hw); - goto out; - } - - /* Power on sgmii phy if it is disabled */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - E1000_WRITE_REG(hw, E1000_CTRL_EXT, - ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); - E1000_WRITE_FLUSH(hw); - msec_delay(300); - - /* - * The address field in the I2CCMD register is 3 bits and 0 is invalid. - * Therefore, we need to test 1-7 - */ - for (phy->addr = 1; phy->addr < 8; phy->addr++) { - ret_val = e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); - if (ret_val == E1000_SUCCESS) { - DEBUGOUT2("Vendor ID 0x%08X read at address %u\n", - phy_id, phy->addr); - /* - * At the time of this writing, The M88 part is - * the only supported SGMII PHY product. - */ - if (phy_id == M88_VENDOR) - break; - } else { - DEBUGOUT1("PHY address %u was unreadable\n", - phy->addr); - } - } - - /* A valid PHY type couldn't be found. */ - if (phy->addr == 8) { - phy->addr = 0; - ret_val = -E1000_ERR_PHY; - } else { - ret_val = e1000_get_phy_id(hw); - } - - /* restore previous sfp cage power state */ - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - -out: - return ret_val; -} - -/** - * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset - * @hw: pointer to the HW structure - * - * Resets the PHY using the serial gigabit media independent interface. - **/ -static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575"); - - /* - * This isn't a true "hard" reset, but is the only reset - * available to us at this time. - */ - - DEBUGOUT("Soft resetting SGMII attached PHY...\n"); - - if (!(hw->phy.ops.write_reg)) - goto out; - - /* - * SFP documentation requires the following to configure the SPF module - * to work on SGMII. No further documentation is given. - */ - ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); - if (ret_val) - goto out; - - ret_val = hw->phy.ops.commit(hw); - -out: - return ret_val; -} - -/** - * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state - * @hw: pointer to the HW structure - * @active: true to enable LPLU, false to disable - * - * Sets the LPLU D0 state according to the active flag. When - * activating LPLU this function also disables smart speed - * and vice versa. LPLU will not be activated unless the - * device autonegotiation advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at all duplexes. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 data; - - DEBUGFUNC("e1000_set_d0_lplu_state_82575"); - - if (!(hw->phy.ops.read_reg)) - goto out; - - ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); - if (ret_val) - goto out; - - if (active) { - data |= IGP02E1000_PM_D0_LPLU; - ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); - if (ret_val) - goto out; - - /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } else { - data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - goto out; - - data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - goto out; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } - } - -out: - return ret_val; -} - -/** - * e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state - * @hw: pointer to the HW structure - * @active: true to enable LPLU, false to disable - * - * Sets the LPLU D0 state according to the active flag. When - * activating LPLU this function also disables smart speed - * and vice versa. LPLU will not be activated unless the - * device autonegotiation advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at all duplexes. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 data; - - DEBUGFUNC("e1000_set_d0_lplu_state_82580"); - - data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - - if (active) { - data |= E1000_82580_PM_D0_LPLU; - - /* When LPLU is enabled, we should disable SmartSpeed */ - data &= ~E1000_82580_PM_SPD; - } else { - data &= ~E1000_82580_PM_D0_LPLU; - - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) - data |= E1000_82580_PM_SPD; - else if (phy->smart_speed == e1000_smart_speed_off) - data &= ~E1000_82580_PM_SPD; - } - - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); - return ret_val; -} - -/** - * e1000_set_d3_lplu_state_82580 - Sets low power link up state for D3 - * @hw: pointer to the HW structure - * @active: boolean used to enable/disable lplu - * - * Success returns 0, Failure returns 1 - * - * The low power link up (lplu) state is set to the power management level D3 - * and SmartSpeed is disabled when active is true, else clear lplu for D3 - * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU - * is used during Dx states where the power conservation is most important. - * During driver activity, SmartSpeed should be enabled so performance is - * maintained. - **/ -s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 data; - - DEBUGFUNC("e1000_set_d3_lplu_state_82580"); - - data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - - if (!active) { - data &= ~E1000_82580_PM_D3_LPLU; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) - data |= E1000_82580_PM_SPD; - else if (phy->smart_speed == e1000_smart_speed_off) - data &= ~E1000_82580_PM_SPD; - } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { - data |= E1000_82580_PM_D3_LPLU; - /* When LPLU is enabled, we should disable SmartSpeed */ - data &= ~E1000_82580_PM_SPD; - } - - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); - return ret_val; -} - -/** - * e1000_acquire_nvm_82575 - Request for access to EEPROM - * @hw: pointer to the HW structure - * - * Acquire the necessary semaphores for exclusive access to the EEPROM. - * Set the EEPROM access request bit and wait for EEPROM access grant bit. - * Return successful if access grant bit set, else clear the request for - * EEPROM access and return -E1000_ERR_NVM (-1). - **/ -static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw) -{ - s32 ret_val; - - DEBUGFUNC("e1000_acquire_nvm_82575"); - - ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); - if (ret_val) - goto out; - - /* - * Check if there is some access - * error this access may hook on - */ - if (hw->mac.type == e1000_i350) { - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - if (eecd & (E1000_EECD_BLOCKED | E1000_EECD_ABORT | - E1000_EECD_TIMEOUT)) { - /* Clear all access error flags */ - E1000_WRITE_REG(hw, E1000_EECD, eecd | - E1000_EECD_ERROR_CLR); - DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); - } - } - if (hw->mac.type == e1000_82580) { - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - if (eecd & E1000_EECD_BLOCKED) { - /* Clear access error flag */ - E1000_WRITE_REG(hw, E1000_EECD, eecd | - E1000_EECD_BLOCKED); - DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); - } - } - - - ret_val = e1000_acquire_nvm_generic(hw); - if (ret_val) - e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); - -out: - return ret_val; -} - -/** - * e1000_release_nvm_82575 - Release exclusive access to EEPROM - * @hw: pointer to the HW structure - * - * Stop any current commands to the EEPROM and clear the EEPROM request bit, - * then release the semaphores acquired. - **/ -static void e1000_release_nvm_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_release_nvm_82575"); - - e1000_release_nvm_generic(hw); - - e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); -} - -/** - * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore - * @hw: pointer to the HW structure - * @mask: specifies which semaphore to acquire - * - * Acquire the SW/FW semaphore to access the PHY or NVM. The mask - * will also specify which port we're acquiring the lock for. - **/ -static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync; - u32 swmask = mask; - u32 fwmask = mask << 16; - s32 ret_val = E1000_SUCCESS; - s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ - - DEBUGFUNC("e1000_acquire_swfw_sync_82575"); - - while (i < timeout) { - if (e1000_get_hw_semaphore_generic(hw)) { - ret_val = -E1000_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - if (!(swfw_sync & (fwmask | swmask))) - break; - - /* - * Firmware currently using resource (fwmask) - * or other software thread using resource (swmask) - */ - e1000_put_hw_semaphore_generic(hw); - msec_delay_irq(5); - i++; - } - - if (i == timeout) { - DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); - ret_val = -E1000_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync |= swmask; - E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); - - e1000_put_hw_semaphore_generic(hw); - -out: - return ret_val; -} - -/** - * e1000_release_swfw_sync_82575 - Release SW/FW semaphore - * @hw: pointer to the HW structure - * @mask: specifies which semaphore to acquire - * - * Release the SW/FW semaphore used to access the PHY or NVM. The mask - * will also specify which port we're releasing the lock for. - **/ -static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync; - - DEBUGFUNC("e1000_release_swfw_sync_82575"); - - while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS) - ; /* Empty */ - - swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - swfw_sync &= ~mask; - E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); - - e1000_put_hw_semaphore_generic(hw); -} - -/** - * e1000_get_cfg_done_82575 - Read config done bit - * @hw: pointer to the HW structure - * - * Read the management control register for the config done bit for - * completion status. NOTE: silicon which is EEPROM-less will fail trying - * to read the config done bit, so an error is *ONLY* logged and returns - * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon - * would not be able to be reset or change link. - **/ -static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw) -{ - s32 timeout = PHY_CFG_TIMEOUT; - s32 ret_val = E1000_SUCCESS; - u32 mask = E1000_NVM_CFG_DONE_PORT_0; - - DEBUGFUNC("e1000_get_cfg_done_82575"); - - if (hw->bus.func == E1000_FUNC_1) - mask = E1000_NVM_CFG_DONE_PORT_1; - else if (hw->bus.func == E1000_FUNC_2) - mask = E1000_NVM_CFG_DONE_PORT_2; - else if (hw->bus.func == E1000_FUNC_3) - mask = E1000_NVM_CFG_DONE_PORT_3; - while (timeout) { - if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask) - break; - msec_delay(1); - timeout--; - } - if (!timeout) - DEBUGOUT("MNG configuration cycle has not completed.\n"); - - /* If EEPROM is not marked present, init the PHY manually */ - if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) && - (hw->phy.type == e1000_phy_igp_3)) - e1000_phy_init_script_igp3(hw); - - return ret_val; -} - -/** - * e1000_get_link_up_info_82575 - Get link speed/duplex info - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * This is a wrapper function, if using the serial gigabit media independent - * interface, use PCS to retrieve the link speed and duplex information. - * Otherwise, use the generic function to get the link speed and duplex info. - **/ -static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16 *duplex) -{ - s32 ret_val; - - DEBUGFUNC("e1000_get_link_up_info_82575"); - - if (hw->phy.media_type != e1000_media_type_copper) - ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed, - duplex); - else - ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, - duplex); - - return ret_val; -} - -/** - * e1000_check_for_link_82575 - Check for link - * @hw: pointer to the HW structure - * - * If sgmii is enabled, then use the pcs register to determine link, otherwise - * use the generic interface for determining link. - **/ -static s32 e1000_check_for_link_82575(struct e1000_hw *hw) -{ - s32 ret_val; - u16 speed, duplex; - - DEBUGFUNC("e1000_check_for_link_82575"); - - if (hw->phy.media_type != e1000_media_type_copper) { - ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed, - &duplex); - /* - * Use this flag to determine if link needs to be checked or - * not. If we have link clear the flag so that we do not - * continue to check for link. - */ - hw->mac.get_link_status = !hw->mac.serdes_has_link; - - /* - * Configure Flow Control now that Auto-Neg has completed. - * First, we need to restore the desired flow control - * settings because we may have had to re-autoneg with a - * different link partner. - */ - ret_val = e1000_config_fc_after_link_up_generic(hw); - if (ret_val) - DEBUGOUT("Error configuring flow control\n"); - } else { - ret_val = e1000_check_for_copper_link_generic(hw); - } - - return ret_val; -} - -/** - * e1000_check_for_link_media_swap - Check which M88E1112 interface linked - * @hw: pointer to the HW structure - * - * Poll the M88E1112 interfaces to see which interface achieved link. - */ -static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - u8 port = 0; - - DEBUGFUNC("e1000_check_for_link_media_swap"); - - /* Check the copper medium. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); - if (ret_val) - return ret_val; - - if (data & E1000_M88E1112_STATUS_LINK) - port = E1000_MEDIA_PORT_COPPER; - - /* Check the other medium. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); - if (ret_val) - return ret_val; - - if (data & E1000_M88E1112_STATUS_LINK) - port = E1000_MEDIA_PORT_OTHER; - - /* Determine if a swap needs to happen. */ - if (port && (hw->dev_spec._82575.media_port != port)) { - hw->dev_spec._82575.media_port = port; - hw->dev_spec._82575.media_changed = true; - } else { - ret_val = e1000_check_for_link_82575(hw); - } - - return E1000_SUCCESS; -} - -/** - * e1000_power_up_serdes_link_82575 - Power up the serdes link after shutdown - * @hw: pointer to the HW structure - **/ -static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw) -{ - u32 reg; - - DEBUGFUNC("e1000_power_up_serdes_link_82575"); - - if ((hw->phy.media_type != e1000_media_type_internal_serdes) && - !e1000_sgmii_active_82575(hw)) - return; - - /* Enable PCS to turn on link */ - reg = E1000_READ_REG(hw, E1000_PCS_CFG0); - reg |= E1000_PCS_CFG_PCS_EN; - E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); - - /* Power up the laser */ - reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg &= ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); - - /* flush the write to verify completion */ - E1000_WRITE_FLUSH(hw); - msec_delay(1); -} - -/** - * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * Using the physical coding sub-layer (PCS), retrieve the current speed and - * duplex, then store the values in the pointers provided. - **/ -static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16 *speed, u16 *duplex) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 pcs; - u32 status; - - DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575"); - - /* - * Read the PCS Status register for link state. For non-copper mode, - * the status register is not accurate. The PCS status register is - * used instead. - */ - pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT); - - /* - * The link up bit determines when link is up on autoneg. - */ - if (pcs & E1000_PCS_LSTS_LINK_OK) { - mac->serdes_has_link = true; - - /* Detect and store PCS speed */ - if (pcs & E1000_PCS_LSTS_SPEED_1000) - *speed = SPEED_1000; - else if (pcs & E1000_PCS_LSTS_SPEED_100) - *speed = SPEED_100; - else - *speed = SPEED_10; - - /* Detect and store PCS duplex */ - if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - - /* Check if it is an I354 2.5Gb backplane connection. */ - if (mac->type == e1000_i354) { - status = E1000_READ_REG(hw, E1000_STATUS); - if ((status & E1000_STATUS_2P5_SKU) && - !(status & E1000_STATUS_2P5_SKU_OVER)) { - *speed = SPEED_2500; - *duplex = FULL_DUPLEX; - DEBUGOUT("2500 Mbs, "); - DEBUGOUT("Full Duplex\n"); - } - } - - } else { - mac->serdes_has_link = false; - *speed = 0; - *duplex = 0; - } - - return E1000_SUCCESS; -} - -/** - * e1000_shutdown_serdes_link_82575 - Remove link during power down - * @hw: pointer to the HW structure - * - * In the case of serdes shut down sfp and PCS on driver unload - * when management pass through is not enabled. - **/ -void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw) -{ - u32 reg; - - DEBUGFUNC("e1000_shutdown_serdes_link_82575"); - - if ((hw->phy.media_type != e1000_media_type_internal_serdes) && - !e1000_sgmii_active_82575(hw)) - return; - - if (!e1000_enable_mng_pass_thru(hw)) { - /* Disable PCS to turn off link */ - reg = E1000_READ_REG(hw, E1000_PCS_CFG0); - reg &= ~E1000_PCS_CFG_PCS_EN; - E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); - - /* shutdown the laser */ - reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg |= E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); - - /* flush the write to verify completion */ - E1000_WRITE_FLUSH(hw); - msec_delay(1); - } - - return; -} - -/** - * e1000_reset_hw_82575 - Reset hardware - * @hw: pointer to the HW structure - * - * This resets the hardware into a known state. - **/ -static s32 e1000_reset_hw_82575(struct e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - - DEBUGFUNC("e1000_reset_hw_82575"); - - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection - * on the last TLP read/write transaction when MAC is reset. - */ - ret_val = e1000_disable_pcie_master_generic(hw); - if (ret_val) - DEBUGOUT("PCI-E Master disable polling has failed.\n"); - - /* set the completion timeout for interface */ - ret_val = e1000_set_pcie_completion_timeout(hw); - if (ret_val) - DEBUGOUT("PCI-E Set completion timeout has failed.\n"); - - DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - - E1000_WRITE_REG(hw, E1000_RCTL, 0); - E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); - - msec_delay(10); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - DEBUGOUT("Issuing a global reset to MAC\n"); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST); - - ret_val = e1000_get_auto_rd_done_generic(hw); - if (ret_val) { - /* - * When auto config read does not complete, do not - * return with an error. This can happen in situations - * where there is no eeprom and prevents getting link. - */ - DEBUGOUT("Auto Read Done did not complete\n"); - } - - /* If EEPROM is not present, run manual init scripts */ - if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES)) - e1000_reset_init_script_82575(hw); - - /* Clear any pending interrupt events. */ - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - E1000_READ_REG(hw, E1000_ICR); - - /* Install any alternate MAC address into RAR0 */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - - return ret_val; -} - -/** - * e1000_init_hw_82575 - Initialize hardware - * @hw: pointer to the HW structure - * - * This inits the hardware readying it for operation. - **/ -static s32 e1000_init_hw_82575(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - u16 i, rar_count = mac->rar_entry_count; - - DEBUGFUNC("e1000_init_hw_82575"); - - /* Initialize identification LED */ - ret_val = mac->ops.id_led_init(hw); - if (ret_val) { - DEBUGOUT("Error initializing identification LED\n"); - /* This is not fatal and we should not stop init due to this */ - } - - /* Disabling VLAN filtering */ - DEBUGOUT("Initializing the IEEE VLAN\n"); - mac->ops.clear_vfta(hw); - - /* Setup the receive address */ - e1000_init_rx_addrs_generic(hw, rar_count); - - /* Zero out the Multicast HASH table */ - DEBUGOUT("Zeroing the MTA\n"); - for (i = 0; i < mac->mta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); - - /* Zero out the Unicast HASH table */ - DEBUGOUT("Zeroing the UTA\n"); - for (i = 0; i < mac->uta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, 0); - - /* Setup link and flow control */ - ret_val = mac->ops.setup_link(hw); - - /* Set the default MTU size */ - hw->dev_spec._82575.mtu = 1500; - - /* - * Clear all of the statistics registers (clear on read). It is - * important that we do this after we have tried to establish link - * because the symbol error count will increment wildly if there - * is no link. - */ - e1000_clear_hw_cntrs_82575(hw); - - return ret_val; -} - -/** - * e1000_setup_copper_link_82575 - Configure copper link settings - * @hw: pointer to the HW structure - * - * Configures the link for auto-neg or forced speed and duplex. Then we check - * for link, once link is established calls to configure collision distance - * and flow control are called. - **/ -static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - u32 phpm_reg; - - DEBUGFUNC("e1000_setup_copper_link_82575"); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= E1000_CTRL_SLU; - ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Clear Go Link Disconnect bit on supported devices */ - switch (hw->mac.type) { - case e1000_82580: - case e1000_i350: - case e1000_i210: - case e1000_i211: - phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - phpm_reg &= ~E1000_82580_PM_GO_LINKD; - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg); - break; - default: - break; - } - - ret_val = e1000_setup_serdes_link_82575(hw); - if (ret_val) - goto out; - - if (e1000_sgmii_active_82575(hw) && !hw->phy.reset_disable) { - /* allow time for SFP cage time to power up phy */ - msec_delay(300); - - ret_val = hw->phy.ops.reset(hw); - if (ret_val) { - DEBUGOUT("Error resetting the PHY.\n"); - goto out; - } - } - switch (hw->phy.type) { - case e1000_phy_i210: - case e1000_phy_m88: - switch (hw->phy.id) { - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1340M_E_PHY_ID: - case M88E1543_E_PHY_ID: - case I210_I_PHY_ID: - ret_val = e1000_copper_link_setup_m88_gen2(hw); - break; - default: - ret_val = e1000_copper_link_setup_m88(hw); - break; - } - break; - case e1000_phy_igp_3: - ret_val = e1000_copper_link_setup_igp(hw); - break; - case e1000_phy_82580: - ret_val = e1000_copper_link_setup_82577(hw); - break; - default: - ret_val = -E1000_ERR_PHY; - break; - } - - if (ret_val) - goto out; - - ret_val = e1000_setup_copper_link_generic(hw); -out: - return ret_val; -} - -/** - * e1000_setup_serdes_link_82575 - Setup link for serdes - * @hw: pointer to the HW structure - * - * Configure the physical coding sub-layer (PCS) link. The PCS link is - * used on copper connections where the serialized gigabit media independent - * interface (sgmii), or serdes fiber is being used. Configures the link - * for auto-negotiation or forces speed/duplex. - **/ -static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) -{ - u32 ctrl_ext, ctrl_reg, reg, anadv_reg; - bool pcs_autoneg; - s32 ret_val = E1000_SUCCESS; - u16 data; - - DEBUGFUNC("e1000_setup_serdes_link_82575"); - - if ((hw->phy.media_type != e1000_media_type_internal_serdes) && - !e1000_sgmii_active_82575(hw)) - return ret_val; - - /* - * On the 82575, SerDes loopback mode persists until it is - * explicitly turned off or a power cycle is performed. A read to - * the register does not indicate its status. Therefore, we ensure - * loopback mode is disabled during initialization. - */ - E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); - - /* power on the sfp cage if present */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - - ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); - ctrl_reg |= E1000_CTRL_SLU; - - /* set both sw defined pins on 82575/82576*/ - if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) - ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1; - - reg = E1000_READ_REG(hw, E1000_PCS_LCTL); - - /* default pcs_autoneg to the same setting as mac autoneg */ - pcs_autoneg = hw->mac.autoneg; - - switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { - case E1000_CTRL_EXT_LINK_MODE_SGMII: - /* sgmii mode lets the phy handle forcing speed/duplex */ - pcs_autoneg = true; - /* autoneg time out should be disabled for SGMII mode */ - reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); - break; - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - /* disable PCS autoneg and support parallel detect only */ - pcs_autoneg = false; - /* fall through to default case */ - default: - if (hw->mac.type == e1000_82575 || - hw->mac.type == e1000_82576) { - ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT) - pcs_autoneg = false; - } - - /* - * non-SGMII modes only supports a speed of 1000/Full for the - * link so it is best to just force the MAC and let the pcs - * link either autoneg or be forced to 1000/Full - */ - ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | - E1000_CTRL_FD | E1000_CTRL_FRCDPX; - - /* set speed of 1000/Full if speed/duplex is forced */ - reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL; - break; - } - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); - - /* - * New SerDes mode allows for forcing speed or autonegotiating speed - * at 1gb. Autoneg should be default set by most drivers. This is the - * mode that will be compatible with older link partners and switches. - * However, both are supported by the hardware and some drivers/tools. - */ - reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | - E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); - - if (pcs_autoneg) { - /* Set PCS register for autoneg */ - reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ - E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ - - /* Disable force flow control for autoneg */ - reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; - - /* Configure flow control advertisement for autoneg */ - anadv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); - anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); - - switch (hw->fc.requested_mode) { - case e1000_fc_full: - case e1000_fc_rx_pause: - anadv_reg |= E1000_TXCW_ASM_DIR; - anadv_reg |= E1000_TXCW_PAUSE; - break; - case e1000_fc_tx_pause: - anadv_reg |= E1000_TXCW_ASM_DIR; - break; - default: - break; - } - - E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg); - - DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); - } else { - /* Set PCS register for forced link */ - reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ - - /* Force flow control for forced link */ - reg |= E1000_PCS_LCTL_FORCE_FCTRL; - - DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); - } - - E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); - - if (!pcs_autoneg && !e1000_sgmii_active_82575(hw)) - e1000_force_mac_fc_generic(hw); - - return ret_val; -} - -/** - * e1000_get_media_type_82575 - derives current media type. - * @hw: pointer to the HW structure - * - * The media type is chosen reflecting few settings. - * The following are taken into account: - * - link mode set in the current port Init Control Word #3 - * - current link mode settings in CSR register - * - MDIO vs. I2C PHY control interface chosen - * - SFP module media type - **/ -static s32 e1000_get_media_type_82575(struct e1000_hw *hw) -{ - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - s32 ret_val = E1000_SUCCESS; - u32 ctrl_ext = 0; - u32 link_mode = 0; - - /* Set internal phy as default */ - dev_spec->sgmii_active = false; - dev_spec->module_plugged = false; - - /* Get CSR setting */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - - /* extract link mode setting */ - link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK; - - switch (link_mode) { - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - hw->phy.media_type = e1000_media_type_internal_serdes; - break; - case E1000_CTRL_EXT_LINK_MODE_GMII: - hw->phy.media_type = e1000_media_type_copper; - break; - case E1000_CTRL_EXT_LINK_MODE_SGMII: - /* Get phy control interface type set (MDIO vs. I2C)*/ - if (e1000_sgmii_uses_mdio_82575(hw)) { - hw->phy.media_type = e1000_media_type_copper; - dev_spec->sgmii_active = true; - break; - } - /* fall through for I2C based SGMII */ - case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: - /* read media type from SFP EEPROM */ - ret_val = e1000_set_sfp_media_type_82575(hw); - if ((ret_val != E1000_SUCCESS) || - (hw->phy.media_type == e1000_media_type_unknown)) { - /* - * If media type was not identified then return media - * type defined by the CTRL_EXT settings. - */ - hw->phy.media_type = e1000_media_type_internal_serdes; - - if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) { - hw->phy.media_type = e1000_media_type_copper; - dev_spec->sgmii_active = true; - } - - break; - } - - /* do not change link mode for 100BaseFX */ - if (dev_spec->eth_flags.e100_base_fx) - break; - - /* change current link mode setting */ - ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK; - - if (hw->phy.media_type == e1000_media_type_copper) - ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII; - else - ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; - - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - - break; - } - - return ret_val; -} - -/** - * e1000_set_sfp_media_type_82575 - derives SFP module media type. - * @hw: pointer to the HW structure - * - * The media type is chosen based on SFP module. - * compatibility flags retrieved from SFP ID EEPROM. - **/ -static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw) -{ - s32 ret_val = E1000_ERR_CONFIG; - u32 ctrl_ext = 0; - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - struct sfp_e1000_flags *eth_flags = &dev_spec->eth_flags; - u8 tranceiver_type = 0; - s32 timeout = 3; - - /* Turn I2C interface ON and power on sfp cage */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA); - - E1000_WRITE_FLUSH(hw); - - /* Read SFP module data */ - while (timeout) { - ret_val = e1000_read_sfp_data_byte(hw, - E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET), - &tranceiver_type); - if (ret_val == E1000_SUCCESS) - break; - msec_delay(100); - timeout--; - } - if (ret_val != E1000_SUCCESS) - goto out; - - ret_val = e1000_read_sfp_data_byte(hw, - E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET), - (u8 *)eth_flags); - if (ret_val != E1000_SUCCESS) - goto out; - - /* Check if there is some SFP module plugged and powered */ - if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) || - (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) { - dev_spec->module_plugged = true; - if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) { - hw->phy.media_type = e1000_media_type_internal_serdes; - } else if (eth_flags->e100_base_fx) { - dev_spec->sgmii_active = true; - hw->phy.media_type = e1000_media_type_internal_serdes; - } else if (eth_flags->e1000_base_t) { - dev_spec->sgmii_active = true; - hw->phy.media_type = e1000_media_type_copper; - } else { - hw->phy.media_type = e1000_media_type_unknown; - DEBUGOUT("PHY module has not been recognized\n"); - goto out; - } - } else { - hw->phy.media_type = e1000_media_type_unknown; - } - ret_val = E1000_SUCCESS; -out: - /* Restore I2C interface setting */ - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - return ret_val; -} - -/** - * e1000_valid_led_default_82575 - Verify a valid default LED config - * @hw: pointer to the HW structure - * @data: pointer to the NVM (EEPROM) - * - * Read the EEPROM for the current default LED configuration. If the - * LED configuration is not valid, set to a valid LED configuration. - **/ -static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_valid_led_default_82575"); - - ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { - switch (hw->phy.media_type) { - case e1000_media_type_internal_serdes: - *data = ID_LED_DEFAULT_82575_SERDES; - break; - case e1000_media_type_copper: - default: - *data = ID_LED_DEFAULT; - break; - } - } -out: - return ret_val; -} - -/** - * e1000_sgmii_active_82575 - Return sgmii state - * @hw: pointer to the HW structure - * - * 82575 silicon has a serialized gigabit media independent interface (sgmii) - * which can be enabled for use in the embedded applications. Simply - * return the current state of the sgmii interface. - **/ -static bool e1000_sgmii_active_82575(struct e1000_hw *hw) -{ - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - return dev_spec->sgmii_active; -} - -/** - * e1000_reset_init_script_82575 - Inits HW defaults after reset - * @hw: pointer to the HW structure - * - * Inits recommended HW defaults after a reset when there is no EEPROM - * detected. This is only for the 82575. - **/ -static s32 e1000_reset_init_script_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_reset_init_script_82575"); - - if (hw->mac.type == e1000_82575) { - DEBUGOUT("Running reset init script for 82575\n"); - /* SerDes configuration via SERDESCTRL */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15); - - /* CCM configuration via CCMCTL register */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00); - - /* PCIe lanes configuration */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x00, 0xEC); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x61, 0xDF); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x34, 0x05); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x2F, 0x81); - - /* PCIe PLL Configuration */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00); - } - - return E1000_SUCCESS; -} - -/** - * e1000_read_mac_addr_82575 - Read device MAC address - * @hw: pointer to the HW structure - **/ -static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_read_mac_addr_82575"); - - /* - * If there's an alternate MAC address place it in RAR0 - * so that it will override the Si installed default perm - * address. - */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - if (ret_val) - goto out; - - ret_val = e1000_read_mac_addr_generic(hw); - -out: - return ret_val; -} - -/** - * e1000_config_collision_dist_82575 - Configure collision distance - * @hw: pointer to the HW structure - * - * Configures the collision distance to the default value and is used - * during link setup. - **/ -static void e1000_config_collision_dist_82575(struct e1000_hw *hw) -{ - u32 tctl_ext; - - DEBUGFUNC("e1000_config_collision_dist_82575"); - - tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT); - - tctl_ext &= ~E1000_TCTL_EXT_COLD; - tctl_ext |= E1000_COLLISION_DISTANCE << E1000_TCTL_EXT_COLD_SHIFT; - - E1000_WRITE_REG(hw, E1000_TCTL_EXT, tctl_ext); - E1000_WRITE_FLUSH(hw); -} - -/** - * e1000_power_down_phy_copper_82575 - Remove link during PHY power down - * @hw: pointer to the HW structure - * - * In the case of a PHY power down to save power, or to turn off link during a - * driver unload, or wake on lan is not enabled, remove the link. - **/ -static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - - if (!(phy->ops.check_reset_block)) - return; - - /* If the management interface is not enabled, then power down */ - if (!(e1000_enable_mng_pass_thru(hw) || phy->ops.check_reset_block(hw))) - e1000_power_down_phy_copper(hw); - - return; -} - -/** - * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters - * @hw: pointer to the HW structure - * - * Clears the hardware counters by reading the counter registers. - **/ -static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_clear_hw_cntrs_82575"); - - e1000_clear_hw_cntrs_base_generic(hw); - - E1000_READ_REG(hw, E1000_PRC64); - E1000_READ_REG(hw, E1000_PRC127); - E1000_READ_REG(hw, E1000_PRC255); - E1000_READ_REG(hw, E1000_PRC511); - E1000_READ_REG(hw, E1000_PRC1023); - E1000_READ_REG(hw, E1000_PRC1522); - E1000_READ_REG(hw, E1000_PTC64); - E1000_READ_REG(hw, E1000_PTC127); - E1000_READ_REG(hw, E1000_PTC255); - E1000_READ_REG(hw, E1000_PTC511); - E1000_READ_REG(hw, E1000_PTC1023); - E1000_READ_REG(hw, E1000_PTC1522); - - E1000_READ_REG(hw, E1000_ALGNERRC); - E1000_READ_REG(hw, E1000_RXERRC); - E1000_READ_REG(hw, E1000_TNCRS); - E1000_READ_REG(hw, E1000_CEXTERR); - E1000_READ_REG(hw, E1000_TSCTC); - E1000_READ_REG(hw, E1000_TSCTFC); - - E1000_READ_REG(hw, E1000_MGTPRC); - E1000_READ_REG(hw, E1000_MGTPDC); - E1000_READ_REG(hw, E1000_MGTPTC); - - E1000_READ_REG(hw, E1000_IAC); - E1000_READ_REG(hw, E1000_ICRXOC); - - E1000_READ_REG(hw, E1000_ICRXPTC); - E1000_READ_REG(hw, E1000_ICRXATC); - E1000_READ_REG(hw, E1000_ICTXPTC); - E1000_READ_REG(hw, E1000_ICTXATC); - E1000_READ_REG(hw, E1000_ICTXQEC); - E1000_READ_REG(hw, E1000_ICTXQMTC); - E1000_READ_REG(hw, E1000_ICRXDMTC); - - E1000_READ_REG(hw, E1000_CBTMPC); - E1000_READ_REG(hw, E1000_HTDPMC); - E1000_READ_REG(hw, E1000_CBRMPC); - E1000_READ_REG(hw, E1000_RPTHC); - E1000_READ_REG(hw, E1000_HGPTC); - E1000_READ_REG(hw, E1000_HTCBDPC); - E1000_READ_REG(hw, E1000_HGORCL); - E1000_READ_REG(hw, E1000_HGORCH); - E1000_READ_REG(hw, E1000_HGOTCL); - E1000_READ_REG(hw, E1000_HGOTCH); - E1000_READ_REG(hw, E1000_LENERRS); - - /* This register should not be read in copper configurations */ - if ((hw->phy.media_type == e1000_media_type_internal_serdes) || - e1000_sgmii_active_82575(hw)) - E1000_READ_REG(hw, E1000_SCVPC); -} - -/** - * e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable - * @hw: pointer to the HW structure - * - * After rx enable if managability is enabled then there is likely some - * bad data at the start of the fifo and possibly in the DMA fifo. This - * function clears the fifos and flushes any packets that came in as rx was - * being enabled. - **/ -void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) -{ - u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled; - int i, ms_wait; - - DEBUGFUNC("e1000_rx_fifo_workaround_82575"); - if (hw->mac.type != e1000_82575 || - !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN)) - return; - - /* Disable all Rx queues */ - for (i = 0; i < 4; i++) { - rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); - E1000_WRITE_REG(hw, E1000_RXDCTL(i), - rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); - } - /* Poll all queues to verify they have shut down */ - for (ms_wait = 0; ms_wait < 10; ms_wait++) { - msec_delay(1); - rx_enabled = 0; - for (i = 0; i < 4; i++) - rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i)); - if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE)) - break; - } - - if (ms_wait == 10) - DEBUGOUT("Queue disable timed out after 10ms\n"); - - /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all - * incoming packets are rejected. Set enable and wait 2ms so that - * any packet that was coming in as RCTL.EN was set is flushed - */ - rfctl = E1000_READ_REG(hw, E1000_RFCTL); - E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF); - - rlpml = E1000_READ_REG(hw, E1000_RLPML); - E1000_WRITE_REG(hw, E1000_RLPML, 0); - - rctl = E1000_READ_REG(hw, E1000_RCTL); - temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP); - temp_rctl |= E1000_RCTL_LPE; - - E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl); - E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl | E1000_RCTL_EN); - E1000_WRITE_FLUSH(hw); - msec_delay(2); - - /* Enable Rx queues that were previously enabled and restore our - * previous state - */ - for (i = 0; i < 4; i++) - E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]); - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - E1000_WRITE_FLUSH(hw); - - E1000_WRITE_REG(hw, E1000_RLPML, rlpml); - E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); - - /* Flush receive errors generated by workaround */ - E1000_READ_REG(hw, E1000_ROC); - E1000_READ_REG(hw, E1000_RNBC); - E1000_READ_REG(hw, E1000_MPC); -} - -/** - * e1000_set_pcie_completion_timeout - set pci-e completion timeout - * @hw: pointer to the HW structure - * - * The defaults for 82575 and 82576 should be in the range of 50us to 50ms, - * however the hardware default for these parts is 500us to 1ms which is less - * than the 10ms recommended by the pci-e spec. To address this we need to - * increase the value to either 10ms to 200ms for capability version 1 config, - * or 16ms to 55ms for version 2. - **/ -static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw) -{ - u32 gcr = E1000_READ_REG(hw, E1000_GCR); - s32 ret_val = E1000_SUCCESS; - u16 pcie_devctl2; - - /* only take action if timeout value is defaulted to 0 */ - if (gcr & E1000_GCR_CMPL_TMOUT_MASK) - goto out; - - /* - * if capababilities version is type 1 we can write the - * timeout of 10ms to 200ms through the GCR register - */ - if (!(gcr & E1000_GCR_CAP_VER2)) { - gcr |= E1000_GCR_CMPL_TMOUT_10ms; - goto out; - } - - /* - * for version 2 capabilities we need to write the config space - * directly in order to set the completion timeout value for - * 16ms to 55ms - */ - ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); - if (ret_val) - goto out; - - pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; - - ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); -out: - /* disable completion timeout resend */ - gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; - - E1000_WRITE_REG(hw, E1000_GCR, gcr); - return ret_val; -} - -/** - * e1000_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing - * @hw: pointer to the hardware struct - * @enable: state to enter, either enabled or disabled - * @pf: Physical Function pool - do not set anti-spoofing for the PF - * - * enables/disables L2 switch anti-spoofing functionality. - **/ -void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) -{ - u32 reg_val, reg_offset; - - switch (hw->mac.type) { - case e1000_82576: - reg_offset = E1000_DTXSWC; - break; - case e1000_i350: - case e1000_i354: - reg_offset = E1000_TXSWC; - break; - default: - return; - } - - reg_val = E1000_READ_REG(hw, reg_offset); - if (enable) { - reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - /* The PF can spoof - it has to in order to - * support emulation mode NICs - */ - reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); - } else { - reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - } - E1000_WRITE_REG(hw, reg_offset, reg_val); -} - -/** - * e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback - * @hw: pointer to the hardware struct - * @enable: state to enter, either enabled or disabled - * - * enables/disables L2 switch loopback functionality. - **/ -void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) -{ - u32 dtxswc; - - switch (hw->mac.type) { - case e1000_82576: - dtxswc = E1000_READ_REG(hw, E1000_DTXSWC); - if (enable) - dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; - else - dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; - E1000_WRITE_REG(hw, E1000_DTXSWC, dtxswc); - break; - case e1000_i350: - case e1000_i354: - dtxswc = E1000_READ_REG(hw, E1000_TXSWC); - if (enable) - dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; - else - dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; - E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc); - break; - default: - /* Currently no other hardware supports loopback */ - break; - } - - -} - -/** - * e1000_vmdq_set_replication_pf - enable or disable vmdq replication - * @hw: pointer to the hardware struct - * @enable: state to enter, either enabled or disabled - * - * enables/disables replication of packets across multiple pools. - **/ -void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) -{ - u32 vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL); - - if (enable) - vt_ctl |= E1000_VT_CTL_VM_REPL_EN; - else - vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN; - - E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl); -} - -/** - * e1000_read_phy_reg_82580 - Read 82580 MDI control register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the MDI control register in the PHY at offset and stores the - * information read to data. - **/ -static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_read_phy_reg_82580"); - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_read_phy_reg_mdic(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_write_phy_reg_82580 - Write 82580 MDI control register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write to register at offset - * - * Writes data to MDI control register in the PHY at offset. - **/ -static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_write_phy_reg_82580"); - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_write_phy_reg_mdic(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits - * @hw: pointer to the HW structure - * - * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on - * the values found in the EEPROM. This addresses an issue in which these - * bits are not restored from EEPROM after reset. - **/ -static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u32 mdicnfg; - u16 nvm_data = 0; - - DEBUGFUNC("e1000_reset_mdicnfg_82580"); - - if (hw->mac.type != e1000_82580) - goto out; - if (!e1000_sgmii_active_82575(hw)) - goto out; - - ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG); - if (nvm_data & NVM_WORD24_EXT_MDIO) - mdicnfg |= E1000_MDICNFG_EXT_MDIO; - if (nvm_data & NVM_WORD24_COM_MDIO) - mdicnfg |= E1000_MDICNFG_COM_MDIO; - E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg); -out: - return ret_val; -} - -/** - * e1000_reset_hw_82580 - Reset hardware - * @hw: pointer to the HW structure - * - * This resets function or entire device (all ports, etc.) - * to a known state. - **/ -static s32 e1000_reset_hw_82580(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - /* BH SW mailbox bit in SW_FW_SYNC */ - u16 swmbsw_mask = E1000_SW_SYNCH_MB; - u32 ctrl; - bool global_device_reset = hw->dev_spec._82575.global_device_reset; - - DEBUGFUNC("e1000_reset_hw_82580"); - - hw->dev_spec._82575.global_device_reset = false; - - /* 82580 does not reliably do global_device_reset due to hw errata */ - if (hw->mac.type == e1000_82580) - global_device_reset = false; - - /* Get current control state. */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection - * on the last TLP read/write transaction when MAC is reset. - */ - ret_val = e1000_disable_pcie_master_generic(hw); - if (ret_val) - DEBUGOUT("PCI-E Master disable polling has failed.\n"); - - DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - E1000_WRITE_REG(hw, E1000_RCTL, 0); - E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); - - msec_delay(10); - - /* Determine whether or not a global dev reset is requested */ - if (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw, - swmbsw_mask)) - global_device_reset = false; - - if (global_device_reset && !(E1000_READ_REG(hw, E1000_STATUS) & - E1000_STAT_DEV_RST_SET)) - ctrl |= E1000_CTRL_DEV_RST; - else - ctrl |= E1000_CTRL_RST; - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - E1000_WRITE_FLUSH(hw); - - /* Add delay to insure DEV_RST has time to complete */ - if (global_device_reset) - msec_delay(5); - - ret_val = e1000_get_auto_rd_done_generic(hw); - if (ret_val) { - /* - * When auto config read does not complete, do not - * return with an error. This can happen in situations - * where there is no eeprom and prevents getting link. - */ - DEBUGOUT("Auto Read Done did not complete\n"); - } - - /* clear global device reset status bit */ - E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET); - - /* Clear any pending interrupt events. */ - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - E1000_READ_REG(hw, E1000_ICR); - - ret_val = e1000_reset_mdicnfg_82580(hw); - if (ret_val) - DEBUGOUT("Could not reset MDICNFG based on EEPROM\n"); - - /* Install any alternate MAC address into RAR0 */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - - /* Release semaphore */ - if (global_device_reset) - hw->mac.ops.release_swfw_sync(hw, swmbsw_mask); - - return ret_val; -} - -/** - * e1000_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual Rx PBA size - * @data: data received by reading RXPBS register - * - * The 82580 uses a table based approach for packet buffer allocation sizes. - * This function converts the retrieved value into the correct table value - * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 - * 0x0 36 72 144 1 2 4 8 16 - * 0x8 35 70 140 rsv rsv rsv rsv rsv - */ -u16 e1000_rxpbs_adjust_82580(u32 data) -{ - u16 ret_val = 0; - - if (data < E1000_82580_RXPBS_TABLE_SIZE) - ret_val = e1000_82580_rxpbs_table[data]; - - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_with_offset - Validate EEPROM - * checksum - * @hw: pointer to the HW structure - * @offset: offset in words of the checksum protected region - * - * Calculates the EEPROM checksum by reading/adding each word of the EEPROM - * and then verifies that the sum of the EEPROM is equal to 0xBABA. - **/ -s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) -{ - s32 ret_val = E1000_SUCCESS; - u16 checksum = 0; - u16 i, nvm_data; - - DEBUGFUNC("e1000_validate_nvm_checksum_with_offset"); - - for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) { - ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - checksum += nvm_data; - } - - if (checksum != (u16) NVM_SUM) { - DEBUGOUT("NVM Checksum Invalid\n"); - ret_val = -E1000_ERR_NVM; - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_update_nvm_checksum_with_offset - Update EEPROM - * checksum - * @hw: pointer to the HW structure - * @offset: offset in words of the checksum protected region - * - * Updates the EEPROM checksum by reading/adding each word of the EEPROM - * up to the checksum. Then calculates the EEPROM checksum and writes the - * value to the EEPROM. - **/ -s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) -{ - s32 ret_val; - u16 checksum = 0; - u16 i, nvm_data; - - DEBUGFUNC("e1000_update_nvm_checksum_with_offset"); - - for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) { - ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error while updating checksum.\n"); - goto out; - } - checksum += nvm_data; - } - checksum = (u16) NVM_SUM - checksum; - ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1, - &checksum); - if (ret_val) - DEBUGOUT("NVM Write Error while updating checksum.\n"); - -out: - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_82580 - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM section checksum by reading/adding each word of - * the EEPROM and then verifies that the sum of the EEPROM is - * equal to 0xBABA. - **/ -static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 eeprom_regions_count = 1; - u16 j, nvm_data; - u16 nvm_offset; - - DEBUGFUNC("e1000_validate_nvm_checksum_82580"); - - ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { - /* if chekcsums compatibility bit is set validate checksums - * for all 4 ports. */ - eeprom_regions_count = 4; - } - - for (j = 0; j < eeprom_regions_count; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); - if (ret_val != E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_update_nvm_checksum_82580 - Update EEPROM checksum - * @hw: pointer to the HW structure - * - * Updates the EEPROM section checksums for all 4 ports by reading/adding - * each word of the EEPROM up to the checksum. Then calculates the EEPROM - * checksum and writes the value to the EEPROM. - **/ -static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) -{ - s32 ret_val; - u16 j, nvm_data; - u16 nvm_offset; - - DEBUGFUNC("e1000_update_nvm_checksum_82580"); - - ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n"); - goto out; - } - - if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK)) { - /* set compatibility bit to validate checksums appropriately */ - nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK; - ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, - &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n"); - goto out; - } - } - - for (j = 0; j < 4; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); - if (ret_val) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM section checksum by reading/adding each word of - * the EEPROM and then verifies that the sum of the EEPROM is - * equal to 0xBABA. - **/ -static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 j; - u16 nvm_offset; - - DEBUGFUNC("e1000_validate_nvm_checksum_i350"); - - for (j = 0; j < 4; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); - if (ret_val != E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_update_nvm_checksum_i350 - Update EEPROM checksum - * @hw: pointer to the HW structure - * - * Updates the EEPROM section checksums for all 4 ports by reading/adding - * each word of the EEPROM up to the checksum. Then calculates the EEPROM - * checksum and writes the value to the EEPROM. - **/ -static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 j; - u16 nvm_offset; - - DEBUGFUNC("e1000_update_nvm_checksum_i350"); - - for (j = 0; j < 4; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); - if (ret_val != E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - * __e1000_access_emi_reg - Read/write EMI register - * @hw: pointer to the HW structure - * @addr: EMI address to program - * @data: pointer to value to read/write from/to the EMI address - * @read: boolean flag to indicate read or write - **/ -static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address, - u16 *data, bool read) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("__e1000_access_emi_reg"); - - ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address); - if (ret_val) - return ret_val; - - if (read) - ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data); - else - ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data); - - return ret_val; -} - -/** - * e1000_read_emi_reg - Read Extended Management Interface register - * @hw: pointer to the HW structure - * @addr: EMI address to program - * @data: value to be read from the EMI address - **/ -s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) -{ - DEBUGFUNC("e1000_read_emi_reg"); - - return __e1000_access_emi_reg(hw, addr, data, true); -} - -/** - * e1000_set_eee_i350 - Enable/disable EEE support - * @hw: pointer to the HW structure - * - * Enable/disable EEE based on setting in dev_spec structure. - * - **/ -s32 e1000_set_eee_i350(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u32 ipcnfg, eeer; - - DEBUGFUNC("e1000_set_eee_i350"); - - if ((hw->mac.type < e1000_i350) || - (hw->phy.media_type != e1000_media_type_copper)) - goto out; - ipcnfg = E1000_READ_REG(hw, E1000_IPCNFG); - eeer = E1000_READ_REG(hw, E1000_EEER); - - /* enable or disable per user setting */ - if (!(hw->dev_spec._82575.eee_disable)) { - u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU); - - ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); - eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); - - /* This bit should not be set in normal operation. */ - if (eee_su & E1000_EEE_SU_LPI_CLK_STP) - DEBUGOUT("LPI Clock Stop Bit should not be set!\n"); - } else { - ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); - eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); - } - E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg); - E1000_WRITE_REG(hw, E1000_EEER, eeer); - E1000_READ_REG(hw, E1000_IPCNFG); - E1000_READ_REG(hw, E1000_EEER); -out: - - return ret_val; -} - -/** - * e1000_set_eee_i354 - Enable/disable EEE support - * @hw: pointer to the HW structure - * - * Enable/disable EEE legacy mode based on setting in dev_spec structure. - * - **/ -s32 e1000_set_eee_i354(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_data; - - DEBUGFUNC("e1000_set_eee_i354"); - - if ((hw->phy.media_type != e1000_media_type_copper) || - ((phy->id != M88E1543_E_PHY_ID))) - goto out; - - if (!hw->dev_spec._82575.eee_disable) { - /* Switch to PHY page 18. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18); - if (ret_val) - goto out; - - ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1, - &phy_data); - if (ret_val) - goto out; - - phy_data |= E1000_M88E1543_EEE_CTRL_1_MS; - ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1, - phy_data); - if (ret_val) - goto out; - - /* Return the PHY to page 0. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); - if (ret_val) - goto out; - - /* Turn on EEE advertisement. */ - ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - &phy_data); - if (ret_val) - goto out; - - phy_data |= E1000_EEE_ADV_100_SUPPORTED | - E1000_EEE_ADV_1000_SUPPORTED; - ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - phy_data); - } else { - /* Turn off EEE advertisement. */ - ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - &phy_data); - if (ret_val) - goto out; - - phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | - E1000_EEE_ADV_1000_SUPPORTED); - ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - phy_data); - } - -out: - return ret_val; -} - -/** - * e1000_get_eee_status_i354 - Get EEE status - * @hw: pointer to the HW structure - * @status: EEE status - * - * Get EEE status by guessing based on whether Tx or Rx LPI indications have - * been received. - **/ -s32 e1000_get_eee_status_i354(struct e1000_hw *hw, bool *status) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_data; - - DEBUGFUNC("e1000_get_eee_status_i354"); - - /* Check if EEE is supported on this device. */ - if ((hw->phy.media_type != e1000_media_type_copper) || - ((phy->id != M88E1543_E_PHY_ID))) - goto out; - - ret_val = e1000_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, - E1000_PCS_STATUS_DEV_I354, - &phy_data); - if (ret_val) - goto out; - - *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD | - E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false; - -out: - return ret_val; -} - -/* Due to a hw errata, if the host tries to configure the VFTA register - * while performing queries from the BMC or DMA, then the VFTA in some - * cases won't be written. - */ - -/** - * e1000_clear_vfta_i350 - Clear VLAN filter table - * @hw: pointer to the HW structure - * - * Clears the register array which contains the VLAN filter table by - * setting all the values to 0. - **/ -void e1000_clear_vfta_i350(struct e1000_hw *hw) -{ - u32 offset; - int i; - - DEBUGFUNC("e1000_clear_vfta_350"); - - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - for (i = 0; i < 10; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); - - E1000_WRITE_FLUSH(hw); - } -} - -/** - * e1000_write_vfta_i350 - Write value to VLAN filter table - * @hw: pointer to the HW structure - * @offset: register offset in VLAN filter table - * @value: register value written to VLAN filter table - * - * Writes value at the given offset in the register array which stores - * the VLAN filter table. - **/ -void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value) -{ - int i; - - DEBUGFUNC("e1000_write_vfta_350"); - - for (i = 0; i < 10; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); - - E1000_WRITE_FLUSH(hw); -} - - -/** - * e1000_set_i2c_bb - Enable I2C bit-bang - * @hw: pointer to the HW structure - * - * Enable I2C bit-bang interface - * - **/ -s32 e1000_set_i2c_bb(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u32 ctrl_ext, i2cparams; - - DEBUGFUNC("e1000_set_i2c_bb"); - - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext |= E1000_CTRL_I2C_ENA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); - - i2cparams = E1000_READ_REG(hw, E1000_I2CPARAMS); - i2cparams |= E1000_I2CBB_EN; - i2cparams |= E1000_I2C_DATA_OE_N; - i2cparams |= E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cparams); - E1000_WRITE_FLUSH(hw); - - return ret_val; -} - -/** - * e1000_read_i2c_byte_generic - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: device address - * @data: value read - * - * Performs byte read operation over I2C interface at - * a specified device address. - **/ -s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) -{ - s32 status = E1000_SUCCESS; - u32 max_retry = 10; - u32 retry = 1; - u16 swfw_mask = 0; - - bool nack = true; - - DEBUGFUNC("e1000_read_i2c_byte_generic"); - - swfw_mask = E1000_SWFW_PHY0_SM; - - do { - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) - != E1000_SUCCESS) { - status = E1000_ERR_SWFW_SYNC; - goto read_byte_out; - } - - e1000_i2c_start(hw); - - /* Device Address and write indication */ - status = e1000_clock_out_i2c_byte(hw, dev_addr); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_byte(hw, byte_offset); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - e1000_i2c_start(hw); - - /* Device Address and read indication */ - status = e1000_clock_out_i2c_byte(hw, (dev_addr | 0x1)); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_in_i2c_byte(hw, data); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_bit(hw, nack); - if (status != E1000_SUCCESS) - goto fail; - - e1000_i2c_stop(hw); - break; - -fail: - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msec_delay(100); - e1000_i2c_bus_clear(hw); - retry++; - if (retry < max_retry) - DEBUGOUT("I2C byte read error - Retrying.\n"); - else - DEBUGOUT("I2C byte read error.\n"); - - } while (retry < max_retry); - - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - -read_byte_out: - - return status; -} - -/** - * e1000_write_i2c_byte_generic - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: device address - * @data: value to write - * - * Performs byte write operation over I2C interface at - * a specified device address. - **/ -s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) -{ - s32 status = E1000_SUCCESS; - u32 max_retry = 1; - u32 retry = 0; - u16 swfw_mask = 0; - - DEBUGFUNC("e1000_write_i2c_byte_generic"); - - swfw_mask = E1000_SWFW_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) { - status = E1000_ERR_SWFW_SYNC; - goto write_byte_out; - } - - do { - e1000_i2c_start(hw); - - status = e1000_clock_out_i2c_byte(hw, dev_addr); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_byte(hw, byte_offset); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_byte(hw, data); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - e1000_i2c_stop(hw); - break; - -fail: - e1000_i2c_bus_clear(hw); - retry++; - if (retry < max_retry) - DEBUGOUT("I2C byte write error - Retrying.\n"); - else - DEBUGOUT("I2C byte write error.\n"); - } while (retry < max_retry); - - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - -write_byte_out: - - return status; -} - -/** - * e1000_i2c_start - Sets I2C start condition - * @hw: pointer to hardware structure - * - * Sets I2C start condition (High -> Low on SDA while SCL is High) - **/ -static void e1000_i2c_start(struct e1000_hw *hw) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_i2c_start"); - - /* Start condition must begin with data and clock high */ - e1000_set_i2c_data(hw, &i2cctl, 1); - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Setup time for start condition (4.7us) */ - usec_delay(E1000_I2C_T_SU_STA); - - e1000_set_i2c_data(hw, &i2cctl, 0); - - /* Hold time for start condition (4us) */ - usec_delay(E1000_I2C_T_HD_STA); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - usec_delay(E1000_I2C_T_LOW); - -} - -/** - * e1000_i2c_stop - Sets I2C stop condition - * @hw: pointer to hardware structure - * - * Sets I2C stop condition (Low -> High on SDA while SCL is High) - **/ -static void e1000_i2c_stop(struct e1000_hw *hw) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_i2c_stop"); - - /* Stop condition must begin with data low and clock high */ - e1000_set_i2c_data(hw, &i2cctl, 0); - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Setup time for stop condition (4us) */ - usec_delay(E1000_I2C_T_SU_STO); - - e1000_set_i2c_data(hw, &i2cctl, 1); - - /* bus free time between stop and start (4.7us)*/ - usec_delay(E1000_I2C_T_BUF); -} - -/** - * e1000_clock_in_i2c_byte - Clocks in one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte to clock in - * - * Clocks in one byte data via I2C data/clock - **/ -static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data) -{ - s32 i; - bool bit = 0; - - DEBUGFUNC("e1000_clock_in_i2c_byte"); - - *data = 0; - for (i = 7; i >= 0; i--) { - e1000_clock_in_i2c_bit(hw, &bit); - *data |= bit << i; - } - - return E1000_SUCCESS; -} - -/** - * e1000_clock_out_i2c_byte - Clocks out one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte clocked out - * - * Clocks out one byte data via I2C data/clock - **/ -static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data) -{ - s32 status = E1000_SUCCESS; - s32 i; - u32 i2cctl; - bool bit = 0; - - DEBUGFUNC("e1000_clock_out_i2c_byte"); - - for (i = 7; i >= 0; i--) { - bit = (data >> i) & 0x1; - status = e1000_clock_out_i2c_bit(hw, bit); - - if (status != E1000_SUCCESS) - break; - } - - /* Release SDA line (set high) */ - i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - i2cctl |= E1000_I2C_DATA_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); - E1000_WRITE_FLUSH(hw); - - return status; -} - -/** - * e1000_get_i2c_ack - Polls for I2C ACK - * @hw: pointer to hardware structure - * - * Clocks in/out one bit via I2C data/clock - **/ -static s32 e1000_get_i2c_ack(struct e1000_hw *hw) -{ - s32 status = E1000_SUCCESS; - u32 i = 0; - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - u32 timeout = 10; - bool ack = true; - - DEBUGFUNC("e1000_get_i2c_ack"); - - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - /* Wait until SCL returns high */ - for (i = 0; i < timeout; i++) { - usec_delay(1); - i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - if (i2cctl & E1000_I2C_CLK_IN) - break; - } - if (!(i2cctl & E1000_I2C_CLK_IN)) - return E1000_ERR_I2C; - - ack = e1000_get_i2c_data(&i2cctl); - if (ack) { - DEBUGOUT("I2C ack was not received.\n"); - status = E1000_ERR_I2C; - } - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - usec_delay(E1000_I2C_T_LOW); - - return status; -} - -/** - * e1000_clock_in_i2c_bit - Clocks in one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: read data value - * - * Clocks in one bit via I2C data/clock - **/ -static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_clock_in_i2c_bit"); - - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - *data = e1000_get_i2c_data(&i2cctl); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - usec_delay(E1000_I2C_T_LOW); - - return E1000_SUCCESS; -} - -/** - * e1000_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: data value to write - * - * Clocks out one bit via I2C data/clock - **/ -static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data) -{ - s32 status; - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_clock_out_i2c_bit"); - - status = e1000_set_i2c_data(hw, &i2cctl, data); - if (status == E1000_SUCCESS) { - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us. - * This also takes care of the data hold time. - */ - usec_delay(E1000_I2C_T_LOW); - } else { - status = E1000_ERR_I2C; - DEBUGOUT1("I2C data was not set to %X\n", data); - } - - return status; -} -/** - * e1000_raise_i2c_clk - Raises the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Raises the I2C clock line '0'->'1' - **/ -static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) -{ - DEBUGFUNC("e1000_raise_i2c_clk"); - - *i2cctl |= E1000_I2C_CLK_OUT; - *i2cctl &= ~E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); - E1000_WRITE_FLUSH(hw); - - /* SCL rise time (1000ns) */ - usec_delay(E1000_I2C_T_RISE); -} - -/** - * e1000_lower_i2c_clk - Lowers the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Lowers the I2C clock line '1'->'0' - **/ -static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) -{ - - DEBUGFUNC("e1000_lower_i2c_clk"); - - *i2cctl &= ~E1000_I2C_CLK_OUT; - *i2cctl &= ~E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); - E1000_WRITE_FLUSH(hw); - - /* SCL fall time (300ns) */ - usec_delay(E1000_I2C_T_FALL); -} - -/** - * e1000_set_i2c_data - Sets the I2C data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * @data: I2C data value (0 or 1) to set - * - * Sets the I2C data bit - **/ -static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data) -{ - s32 status = E1000_SUCCESS; - - DEBUGFUNC("e1000_set_i2c_data"); - - if (data) - *i2cctl |= E1000_I2C_DATA_OUT; - else - *i2cctl &= ~E1000_I2C_DATA_OUT; - - *i2cctl &= ~E1000_I2C_DATA_OE_N; - *i2cctl |= E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); - E1000_WRITE_FLUSH(hw); - - /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ - usec_delay(E1000_I2C_T_RISE + E1000_I2C_T_FALL + E1000_I2C_T_SU_DATA); - - *i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - if (data != e1000_get_i2c_data(i2cctl)) { - status = E1000_ERR_I2C; - DEBUGOUT1("Error - I2C data was not set to %X.\n", data); - } - - return status; -} - -/** - * e1000_get_i2c_data - Reads the I2C SDA data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Returns the I2C data bit value - **/ -static bool e1000_get_i2c_data(u32 *i2cctl) -{ - bool data; - - DEBUGFUNC("e1000_get_i2c_data"); - - if (*i2cctl & E1000_I2C_DATA_IN) - data = 1; - else - data = 0; - - return data; -} - -/** - * e1000_i2c_bus_clear - Clears the I2C bus - * @hw: pointer to hardware structure - * - * Clears the I2C bus by sending nine clock pulses. - * Used when data line is stuck low. - **/ -void e1000_i2c_bus_clear(struct e1000_hw *hw) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - u32 i; - - DEBUGFUNC("e1000_i2c_bus_clear"); - - e1000_i2c_start(hw); - - e1000_set_i2c_data(hw, &i2cctl, 1); - - for (i = 0; i < 9; i++) { - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Min high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Min low period of clock is 4.7us*/ - usec_delay(E1000_I2C_T_LOW); - } - - e1000_i2c_start(hw); - - /* Put the i2c bus back to default state */ - e1000_i2c_stop(hw); -} - -static const u8 e1000_emc_temp_data[4] = { - E1000_EMC_INTERNAL_DATA, - E1000_EMC_DIODE1_DATA, - E1000_EMC_DIODE2_DATA, - E1000_EMC_DIODE3_DATA -}; -static const u8 e1000_emc_therm_limit[4] = { - E1000_EMC_INTERNAL_THERM_LIMIT, - E1000_EMC_DIODE1_THERM_LIMIT, - E1000_EMC_DIODE2_THERM_LIMIT, - E1000_EMC_DIODE3_THERM_LIMIT -}; - -/** - * e1000_get_thermal_sensor_data_generic - Gathers thermal sensor data - * @hw: pointer to hardware structure - * - * Updates the temperatures in mac.thermal_sensor_data - **/ -s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw) -{ - s32 status = E1000_SUCCESS; - u16 ets_offset; - u16 ets_cfg; - u16 ets_sensor; - u8 num_sensors; - u8 sensor_index; - u8 sensor_location; - u8 i; - struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; - - DEBUGFUNC("e1000_get_thermal_sensor_data_generic"); - - if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) - return E1000_NOT_IMPLEMENTED; - - data->sensor[0].temp = (E1000_READ_REG(hw, E1000_THMJT) & 0xFF); - - /* Return the internal sensor only if ETS is unsupported */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); - if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) - return status; - - e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); - if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) - != NVM_ETS_TYPE_EMC) - return E1000_NOT_IMPLEMENTED; - - num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); - if (num_sensors > E1000_MAX_SENSORS) - num_sensors = E1000_MAX_SENSORS; - - for (i = 1; i < num_sensors; i++) { - e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); - sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> - NVM_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> - NVM_ETS_DATA_LOC_SHIFT); - - if (sensor_location != 0) - hw->phy.ops.read_i2c_byte(hw, - e1000_emc_temp_data[sensor_index], - E1000_I2C_THERMAL_SENSOR_ADDR, - &data->sensor[i].temp); - } - return status; -} - -/** - * e1000_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds - * @hw: pointer to hardware structure - * - * Sets the thermal sensor thresholds according to the NVM map - * and save off the threshold and location values into mac.thermal_sensor_data - **/ -s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) -{ - s32 status = E1000_SUCCESS; - u16 ets_offset; - u16 ets_cfg; - u16 ets_sensor; - u8 low_thresh_delta; - u8 num_sensors; - u8 sensor_index; - u8 sensor_location; - u8 therm_limit; - u8 i; - struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; - - DEBUGFUNC("e1000_init_thermal_sensor_thresh_generic"); - - if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) - return E1000_NOT_IMPLEMENTED; - - memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); - - data->sensor[0].location = 0x1; - data->sensor[0].caution_thresh = - (E1000_READ_REG(hw, E1000_THHIGHTC) & 0xFF); - data->sensor[0].max_op_thresh = - (E1000_READ_REG(hw, E1000_THLOWTC) & 0xFF); - - /* Return the internal sensor only if ETS is unsupported */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); - if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) - return status; - - e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); - if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) - != NVM_ETS_TYPE_EMC) - return E1000_NOT_IMPLEMENTED; - - low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> - NVM_ETS_LTHRES_DELTA_SHIFT); - num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); - - for (i = 1; i <= num_sensors; i++) { - e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); - sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> - NVM_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> - NVM_ETS_DATA_LOC_SHIFT); - therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; - - hw->phy.ops.write_i2c_byte(hw, - e1000_emc_therm_limit[sensor_index], - E1000_I2C_THERMAL_SENSOR_ADDR, - therm_limit); - - if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { - data->sensor[i].location = sensor_location; - data->sensor[i].caution_thresh = therm_limit; - data->sensor[i].max_op_thresh = therm_limit - - low_thresh_delta; - } - } - return status; -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.h b/kernel/linux/kni/ethtool/igb/e1000_82575.h deleted file mode 100644 index 2e0dbb2fb5..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_82575.h +++ /dev/null @@ -1,494 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_82575_H_ -#define _E1000_82575_H_ - -#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_DEF2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_OFF1_ON2)) -/* - * Receive Address Register Count - * Number of high/low register pairs in the RAR. The RAR (Receive Address - * Registers) holds the directed and multicast addresses that we monitor. - * These entries are also used for MAC-based filtering. - */ -/* - * For 82576, there are an additional set of RARs that begin at an offset - * separate from the first set of RARs. - */ -#define E1000_RAR_ENTRIES_82575 16 -#define E1000_RAR_ENTRIES_82576 24 -#define E1000_RAR_ENTRIES_82580 24 -#define E1000_RAR_ENTRIES_I350 32 -#define E1000_SW_SYNCH_MB 0x00000100 -#define E1000_STAT_DEV_RST_SET 0x00100000 -#define E1000_CTRL_DEV_RST 0x20000000 - -struct e1000_adv_data_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - union { - u32 data; - struct { - u32 datalen:16; /* Data buffer length */ - u32 rsvd:4; - u32 dtyp:4; /* Descriptor type */ - u32 dcmd:8; /* Descriptor command */ - } config; - } lower; - union { - u32 data; - struct { - u32 status:4; /* Descriptor status */ - u32 idx:4; - u32 popts:6; /* Packet Options */ - u32 paylen:18; /* Payload length */ - } options; - } upper; -}; - -#define E1000_TXD_DTYP_ADV_C 0x2 /* Advanced Context Descriptor */ -#define E1000_TXD_DTYP_ADV_D 0x3 /* Advanced Data Descriptor */ -#define E1000_ADV_TXD_CMD_DEXT 0x20 /* Descriptor extension (0 = legacy) */ -#define E1000_ADV_TUCMD_IPV4 0x2 /* IP Packet Type: 1=IPv4 */ -#define E1000_ADV_TUCMD_IPV6 0x0 /* IP Packet Type: 0=IPv6 */ -#define E1000_ADV_TUCMD_L4T_UDP 0x0 /* L4 Packet TYPE of UDP */ -#define E1000_ADV_TUCMD_L4T_TCP 0x4 /* L4 Packet TYPE of TCP */ -#define E1000_ADV_TUCMD_MKRREQ 0x10 /* Indicates markers are required */ -#define E1000_ADV_DCMD_EOP 0x1 /* End of Packet */ -#define E1000_ADV_DCMD_IFCS 0x2 /* Insert FCS (Ethernet CRC) */ -#define E1000_ADV_DCMD_RS 0x8 /* Report Status */ -#define E1000_ADV_DCMD_VLE 0x40 /* Add VLAN tag */ -#define E1000_ADV_DCMD_TSE 0x80 /* TCP Seg enable */ -/* Extended Device Control */ -#define E1000_CTRL_EXT_NSICR 0x00000001 /* Disable Intr Clear all on read */ - -struct e1000_adv_context_desc { - union { - u32 ip_config; - struct { - u32 iplen:9; - u32 maclen:7; - u32 vlan_tag:16; - } fields; - } ip_setup; - u32 seq_num; - union { - u64 l4_config; - struct { - u32 mkrloc:9; - u32 tucmd:11; - u32 dtyp:4; - u32 adv:8; - u32 rsvd:4; - u32 idx:4; - u32 l4len:8; - u32 mss:16; - } fields; - } l4_setup; -}; - -/* SRRCTL bit definitions */ -#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ -#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 -#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ -#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 -#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 -#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 -#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 -#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 -#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 -#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 -#define E1000_SRRCTL_TIMESTAMP 0x40000000 -#define E1000_SRRCTL_DROP_EN 0x80000000 - -#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F -#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 - -#define E1000_TX_HEAD_WB_ENABLE 0x1 -#define E1000_TX_SEQNUM_WB_ENABLE 0x2 - -#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002 -#define E1000_MRQC_ENABLE_VMDQ 0x00000003 -#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005 -#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 -#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 -#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000 -#define E1000_MRQC_ENABLE_RSS_8Q 0x00000002 - -#define E1000_VMRCTL_MIRROR_PORT_SHIFT 8 -#define E1000_VMRCTL_MIRROR_DSTPORT_MASK (7 << \ - E1000_VMRCTL_MIRROR_PORT_SHIFT) -#define E1000_VMRCTL_POOL_MIRROR_ENABLE (1 << 0) -#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE (1 << 1) -#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE (1 << 2) - -#define E1000_EICR_TX_QUEUE ( \ - E1000_EICR_TX_QUEUE0 | \ - E1000_EICR_TX_QUEUE1 | \ - E1000_EICR_TX_QUEUE2 | \ - E1000_EICR_TX_QUEUE3) - -#define E1000_EICR_RX_QUEUE ( \ - E1000_EICR_RX_QUEUE0 | \ - E1000_EICR_RX_QUEUE1 | \ - E1000_EICR_RX_QUEUE2 | \ - E1000_EICR_RX_QUEUE3) - -#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE -#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE - -#define EIMS_ENABLE_MASK ( \ - E1000_EIMS_RX_QUEUE | \ - E1000_EIMS_TX_QUEUE | \ - E1000_EIMS_TCP_TIMER | \ - E1000_EIMS_OTHER) - -/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ -#define E1000_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ -#define E1000_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ -#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ -#define E1000_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ -#define E1000_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ -#define E1000_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ -#define E1000_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ -#define E1000_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ -#define E1000_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ -#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */ - -/* Receive Descriptor - Advanced */ -union e1000_adv_rx_desc { - struct { - __le64 pkt_addr; /* Packet buffer address */ - __le64 hdr_addr; /* Header buffer address */ - } read; - struct { - struct { - union { - __le32 data; - struct { - __le16 pkt_info; /*RSS type, Pkt type*/ - /* Split Header, header buffer len */ - __le16 hdr_info; - } hs_rss; - } lo_dword; - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length; /* Packet length */ - __le16 vlan; /* VLAN tag */ - } upper; - } wb; /* writeback */ -}; - -#define E1000_RXDADV_RSSTYPE_MASK 0x0000000F -#define E1000_RXDADV_RSSTYPE_SHIFT 12 -#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 -#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 -#define E1000_RXDADV_SPLITHEADER_EN 0x00001000 -#define E1000_RXDADV_SPH 0x8000 -#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */ -#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */ -#define E1000_RXDADV_ERR_HBO 0x00800000 - -/* RSS Hash results */ -#define E1000_RXDADV_RSSTYPE_NONE 0x00000000 -#define E1000_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 -#define E1000_RXDADV_RSSTYPE_IPV4 0x00000002 -#define E1000_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 -#define E1000_RXDADV_RSSTYPE_IPV6_EX 0x00000004 -#define E1000_RXDADV_RSSTYPE_IPV6 0x00000005 -#define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 -#define E1000_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 -#define E1000_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 -#define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 - -/* RSS Packet Types as indicated in the receive descriptor */ -#define E1000_RXDADV_PKTTYPE_NONE 0x00000000 -#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */ -#define E1000_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPV4 hdr + extensions */ -#define E1000_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPV6 hdr present */ -#define E1000_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPV6 hdr + extensions */ -#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ -#define E1000_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ -#define E1000_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ -#define E1000_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ - -#define E1000_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ -#define E1000_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ -#define E1000_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ -#define E1000_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ -#define E1000_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ -#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ - -/* LinkSec results */ -/* Security Processing bit Indication */ -#define E1000_RXDADV_LNKSEC_STATUS_SECP 0x00020000 -#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 -#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 -#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 -#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 - -#define E1000_RXDADV_IPSEC_STATUS_SECP 0x00020000 -#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 -#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 -#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 -#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED 0x18000000 - -/* Transmit Descriptor - Advanced */ -union e1000_adv_tx_desc { - struct { - __le64 buffer_addr; /* Address of descriptor's data buf */ - __le32 cmd_type_len; - __le32 olinfo_status; - } read; - struct { - __le64 rsvd; /* Reserved */ - __le32 nxtseq_seed; - __le32 status; - } wb; -}; - -/* Adv Transmit Descriptor Config Masks */ -#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ -#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ -#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ -#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ -#define E1000_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ -#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ -#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ -#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ -#define E1000_ADVTXD_MAC_LINKSEC 0x00040000 /* Apply LinkSec on pkt */ -#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp pkt */ -#define E1000_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED prsnt in WB */ -#define E1000_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ -#define E1000_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ -#define E1000_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ -#define E1000_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ -/* 1st & Last TSO-full iSCSI PDU*/ -#define E1000_ADVTXD_POPTS_ISCO_FULL 0x00001800 -#define E1000_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ -#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ - -/* Context descriptors */ -struct e1000_adv_tx_context_desc { - __le32 vlan_macip_lens; - __le32 seqnum_seed; - __le32 type_tucmd_mlhl; - __le32 mss_l4len_idx; -}; - -#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ -#define E1000_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ -#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ -#define E1000_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ -#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ -#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ -#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ -#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ -/* IPSec Encrypt Enable for ESP */ -#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000 -/* Req requires Markers and CRC */ -#define E1000_ADVTXD_TUCMD_MKRREQ 0x00002000 -#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ -#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ -/* Adv ctxt IPSec SA IDX mask */ -#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK 0x000000FF -/* Adv ctxt IPSec ESP len mask */ -#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK 0x000000FF - -/* Additional Transmit Descriptor Control definitions */ -#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Tx Queue */ -#define E1000_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wbk flushing */ -/* Tx Queue Arbitration Priority 0=low, 1=high */ -#define E1000_TXDCTL_PRIORITY 0x08000000 - -/* Additional Receive Descriptor Control definitions */ -#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Rx Queue */ -#define E1000_RXDCTL_SWFLSH 0x04000000 /* Rx Desc. wbk flushing */ - -/* Direct Cache Access (DCA) definitions */ -#define E1000_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ -#define E1000_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ - -#define E1000_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ -#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ - -#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ -#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ -#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header ena */ -#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload ena */ -#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx Desc Relax Order */ - -#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ -#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ -#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */ -#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ -#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */ - -#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ -#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ -#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576 24 /* Tx CPUID */ -#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576 24 /* Rx CPUID */ - -/* Additional interrupt register bit definitions */ -#define E1000_ICR_LSECPNS 0x00000020 /* PN threshold - server */ -#define E1000_IMS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ -#define E1000_ICS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ - -/* ETQF register bit definitions */ -#define E1000_ETQF_FILTER_ENABLE (1 << 26) -#define E1000_ETQF_IMM_INT (1 << 29) -#define E1000_ETQF_1588 (1 << 30) -#define E1000_ETQF_QUEUE_ENABLE (1 << 31) -/* - * ETQF filter list: one static filter per filter consumer. This is - * to avoid filter collisions later. Add new filters - * here!! - * - * Current filters: - * EAPOL 802.1x (0x888e): Filter 0 - */ -#define E1000_ETQF_FILTER_EAPOL 0 - -#define E1000_FTQF_VF_BP 0x00008000 -#define E1000_FTQF_1588_TIME_STAMP 0x08000000 -#define E1000_FTQF_MASK 0xF0000000 -#define E1000_FTQF_MASK_PROTO_BP 0x10000000 -#define E1000_FTQF_MASK_SOURCE_ADDR_BP 0x20000000 -#define E1000_FTQF_MASK_DEST_ADDR_BP 0x40000000 -#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000 - -#define E1000_NVM_APME_82575 0x0400 -#define MAX_NUM_VFS 7 - -#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof cntrl */ -#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof cntrl */ -#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */ -#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8 -#define E1000_DTXSWC_LLE_SHIFT 16 -#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ - -/* Easy defines for setting default pool, would normally be left a zero */ -#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7 -#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT) - -/* Other useful VMD_CTL register defines */ -#define E1000_VT_CTL_IGNORE_MAC (1 << 28) -#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29) -#define E1000_VT_CTL_VM_REPL_EN (1 << 30) - -/* Per VM Offload register setup */ -#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */ -#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */ -#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */ -#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */ -#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */ -#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */ -#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */ -#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */ -#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ -#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */ - -#define E1000_VMOLR_VPE 0x00800000 /* VLAN promiscuous enable */ -#define E1000_VMOLR_UPE 0x20000000 /* Unicast promisuous enable */ -#define E1000_DVMOLR_HIDVLAN 0x20000000 /* Vlan hiding enable */ -#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ -#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */ - -#define E1000_PBRWAC_WALPB 0x00000007 /* Wrap around event on LAN Rx PB */ -#define E1000_PBRWAC_PBE 0x00000008 /* Rx packet buffer empty */ - -#define E1000_VLVF_ARRAY_SIZE 32 -#define E1000_VLVF_VLANID_MASK 0x00000FFF -#define E1000_VLVF_POOLSEL_SHIFT 12 -#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT) -#define E1000_VLVF_LVLAN 0x00100000 -#define E1000_VLVF_VLANID_ENABLE 0x80000000 - -#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ -#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ - -#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ - -#define E1000_IOVCTL 0x05BBC -#define E1000_IOVCTL_REUSE_VFQ 0x00000001 - -#define E1000_RPLOLR_STRVLAN 0x40000000 -#define E1000_RPLOLR_STRCRC 0x80000000 - -#define E1000_TCTL_EXT_COLD 0x000FFC00 -#define E1000_TCTL_EXT_COLD_SHIFT 10 - -#define E1000_DTXCTL_8023LL 0x0004 -#define E1000_DTXCTL_VLAN_ADDED 0x0008 -#define E1000_DTXCTL_OOS_ENABLE 0x0010 -#define E1000_DTXCTL_MDP_EN 0x0020 -#define E1000_DTXCTL_SPOOF_INT 0x0040 - -#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14) - -#define ALL_QUEUES 0xFFFF - -/* Rx packet buffer size defines */ -#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F -void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable); -void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf); -void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable); -s32 e1000_init_nvm_params_82575(struct e1000_hw *hw); - -u16 e1000_rxpbs_adjust_82580(u32 data); -s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data); -s32 e1000_set_eee_i350(struct e1000_hw *); -s32 e1000_set_eee_i354(struct e1000_hw *); -s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *); -#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 -#define E1000_EMC_INTERNAL_DATA 0x00 -#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20 -#define E1000_EMC_DIODE1_DATA 0x01 -#define E1000_EMC_DIODE1_THERM_LIMIT 0x19 -#define E1000_EMC_DIODE2_DATA 0x23 -#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A -#define E1000_EMC_DIODE3_DATA 0x2A -#define E1000_EMC_DIODE3_THERM_LIMIT 0x30 - -s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw); -s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw); - -/* I2C SDA and SCL timing parameters for standard mode */ -#define E1000_I2C_T_HD_STA 4 -#define E1000_I2C_T_LOW 5 -#define E1000_I2C_T_HIGH 4 -#define E1000_I2C_T_SU_STA 5 -#define E1000_I2C_T_HD_DATA 5 -#define E1000_I2C_T_SU_DATA 1 -#define E1000_I2C_T_RISE 1 -#define E1000_I2C_T_FALL 1 -#define E1000_I2C_T_SU_STO 4 -#define E1000_I2C_T_BUF 5 - -s32 e1000_set_i2c_bb(struct e1000_hw *hw); -s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data); -s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data); -void e1000_i2c_bus_clear(struct e1000_hw *hw); -#endif /* _E1000_82575_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.c b/kernel/linux/kni/ethtool/igb/e1000_api.c deleted file mode 100644 index 3e54e50ed5..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_api.c +++ /dev/null @@ -1,1144 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000_api.h" - -/** - * e1000_init_mac_params - Initialize MAC function pointers - * @hw: pointer to the HW structure - * - * This function initializes the function pointers for the MAC - * set of functions. Called by drivers or by e1000_setup_init_funcs. - **/ -s32 e1000_init_mac_params(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - if (hw->mac.ops.init_params) { - ret_val = hw->mac.ops.init_params(hw); - if (ret_val) { - DEBUGOUT("MAC Initialization Error\n"); - goto out; - } - } else { - DEBUGOUT("mac.init_mac_params was NULL\n"); - ret_val = -E1000_ERR_CONFIG; - } - -out: - return ret_val; -} - -/** - * e1000_init_nvm_params - Initialize NVM function pointers - * @hw: pointer to the HW structure - * - * This function initializes the function pointers for the NVM - * set of functions. Called by drivers or by e1000_setup_init_funcs. - **/ -s32 e1000_init_nvm_params(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - if (hw->nvm.ops.init_params) { - ret_val = hw->nvm.ops.init_params(hw); - if (ret_val) { - DEBUGOUT("NVM Initialization Error\n"); - goto out; - } - } else { - DEBUGOUT("nvm.init_nvm_params was NULL\n"); - ret_val = -E1000_ERR_CONFIG; - } - -out: - return ret_val; -} - -/** - * e1000_init_phy_params - Initialize PHY function pointers - * @hw: pointer to the HW structure - * - * This function initializes the function pointers for the PHY - * set of functions. Called by drivers or by e1000_setup_init_funcs. - **/ -s32 e1000_init_phy_params(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - if (hw->phy.ops.init_params) { - ret_val = hw->phy.ops.init_params(hw); - if (ret_val) { - DEBUGOUT("PHY Initialization Error\n"); - goto out; - } - } else { - DEBUGOUT("phy.init_phy_params was NULL\n"); - ret_val = -E1000_ERR_CONFIG; - } - -out: - return ret_val; -} - -/** - * e1000_init_mbx_params - Initialize mailbox function pointers - * @hw: pointer to the HW structure - * - * This function initializes the function pointers for the PHY - * set of functions. Called by drivers or by e1000_setup_init_funcs. - **/ -s32 e1000_init_mbx_params(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - if (hw->mbx.ops.init_params) { - ret_val = hw->mbx.ops.init_params(hw); - if (ret_val) { - DEBUGOUT("Mailbox Initialization Error\n"); - goto out; - } - } else { - DEBUGOUT("mbx.init_mbx_params was NULL\n"); - ret_val = -E1000_ERR_CONFIG; - } - -out: - return ret_val; -} - -/** - * e1000_set_mac_type - Sets MAC type - * @hw: pointer to the HW structure - * - * This function sets the mac type of the adapter based on the - * device ID stored in the hw structure. - * MUST BE FIRST FUNCTION CALLED (explicitly or through - * e1000_setup_init_funcs()). - **/ -s32 e1000_set_mac_type(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_set_mac_type"); - - switch (hw->device_id) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - mac->type = e1000_82575; - break; - case E1000_DEV_ID_82576: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - case E1000_DEV_ID_82576_NS: - case E1000_DEV_ID_82576_NS_SERDES: - case E1000_DEV_ID_82576_SERDES_QUAD: - mac->type = e1000_82576; - break; - case E1000_DEV_ID_82580_COPPER: - case E1000_DEV_ID_82580_FIBER: - case E1000_DEV_ID_82580_SERDES: - case E1000_DEV_ID_82580_SGMII: - case E1000_DEV_ID_82580_COPPER_DUAL: - case E1000_DEV_ID_82580_QUAD_FIBER: - case E1000_DEV_ID_DH89XXCC_SGMII: - case E1000_DEV_ID_DH89XXCC_SERDES: - case E1000_DEV_ID_DH89XXCC_BACKPLANE: - case E1000_DEV_ID_DH89XXCC_SFP: - mac->type = e1000_82580; - break; - case E1000_DEV_ID_I350_COPPER: - case E1000_DEV_ID_I350_FIBER: - case E1000_DEV_ID_I350_SERDES: - case E1000_DEV_ID_I350_SGMII: - case E1000_DEV_ID_I350_DA4: - mac->type = e1000_i350; - break; - case E1000_DEV_ID_I210_COPPER_FLASHLESS: - case E1000_DEV_ID_I210_SERDES_FLASHLESS: - case E1000_DEV_ID_I210_COPPER: - case E1000_DEV_ID_I210_COPPER_OEM1: - case E1000_DEV_ID_I210_COPPER_IT: - case E1000_DEV_ID_I210_FIBER: - case E1000_DEV_ID_I210_SERDES: - case E1000_DEV_ID_I210_SGMII: - mac->type = e1000_i210; - break; - case E1000_DEV_ID_I211_COPPER: - mac->type = e1000_i211; - break; - - case E1000_DEV_ID_I354_BACKPLANE_1GBPS: - case E1000_DEV_ID_I354_SGMII: - case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS: - mac->type = e1000_i354; - break; - default: - /* Should never have loaded on this device */ - ret_val = -E1000_ERR_MAC_INIT; - break; - } - - return ret_val; -} - -/** - * e1000_setup_init_funcs - Initializes function pointers - * @hw: pointer to the HW structure - * @init_device: true will initialize the rest of the function pointers - * getting the device ready for use. false will only set - * MAC type and the function pointers for the other init - * functions. Passing false will not generate any hardware - * reads or writes. - * - * This function must be called by a driver in order to use the rest - * of the 'shared' code files. Called by drivers only. - **/ -s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device) -{ - s32 ret_val; - - /* Can't do much good without knowing the MAC type. */ - ret_val = e1000_set_mac_type(hw); - if (ret_val) { - DEBUGOUT("ERROR: MAC type could not be set properly.\n"); - goto out; - } - - if (!hw->hw_addr) { - DEBUGOUT("ERROR: Registers not mapped\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; - } - - /* - * Init function pointers to generic implementations. We do this first - * allowing a driver module to override it afterward. - */ - e1000_init_mac_ops_generic(hw); - e1000_init_phy_ops_generic(hw); - e1000_init_nvm_ops_generic(hw); - e1000_init_mbx_ops_generic(hw); - - /* - * Set up the init function pointers. These are functions within the - * adapter family file that sets up function pointers for the rest of - * the functions in that family. - */ - switch (hw->mac.type) { - case e1000_82575: - case e1000_82576: - case e1000_82580: - case e1000_i350: - case e1000_i354: - e1000_init_function_pointers_82575(hw); - break; - case e1000_i210: - case e1000_i211: - e1000_init_function_pointers_i210(hw); - break; - default: - DEBUGOUT("Hardware not supported\n"); - ret_val = -E1000_ERR_CONFIG; - break; - } - - /* - * Initialize the rest of the function pointers. These require some - * register reads/writes in some cases. - */ - if (!(ret_val) && init_device) { - ret_val = e1000_init_mac_params(hw); - if (ret_val) - goto out; - - ret_val = e1000_init_nvm_params(hw); - if (ret_val) - goto out; - - ret_val = e1000_init_phy_params(hw); - if (ret_val) - goto out; - - ret_val = e1000_init_mbx_params(hw); - if (ret_val) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_get_bus_info - Obtain bus information for adapter - * @hw: pointer to the HW structure - * - * This will obtain information about the HW bus for which the - * adapter is attached and stores it in the hw structure. This is a - * function pointer entry point called by drivers. - **/ -s32 e1000_get_bus_info(struct e1000_hw *hw) -{ - if (hw->mac.ops.get_bus_info) - return hw->mac.ops.get_bus_info(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_clear_vfta - Clear VLAN filter table - * @hw: pointer to the HW structure - * - * This clears the VLAN filter table on the adapter. This is a function - * pointer entry point called by drivers. - **/ -void e1000_clear_vfta(struct e1000_hw *hw) -{ - if (hw->mac.ops.clear_vfta) - hw->mac.ops.clear_vfta(hw); -} - -/** - * e1000_write_vfta - Write value to VLAN filter table - * @hw: pointer to the HW structure - * @offset: the 32-bit offset in which to write the value to. - * @value: the 32-bit value to write at location offset. - * - * This writes a 32-bit value to a 32-bit offset in the VLAN filter - * table. This is a function pointer entry point called by drivers. - **/ -void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) -{ - if (hw->mac.ops.write_vfta) - hw->mac.ops.write_vfta(hw, offset, value); -} - -/** - * e1000_update_mc_addr_list - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * - * Updates the Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - **/ -void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count) -{ - if (hw->mac.ops.update_mc_addr_list) - hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, - mc_addr_count); -} - -/** - * e1000_force_mac_fc - Force MAC flow control - * @hw: pointer to the HW structure - * - * Force the MAC's flow control settings. Currently no func pointer exists - * and all implementations are handled in the generic version of this - * function. - **/ -s32 e1000_force_mac_fc(struct e1000_hw *hw) -{ - return e1000_force_mac_fc_generic(hw); -} - -/** - * e1000_check_for_link - Check/Store link connection - * @hw: pointer to the HW structure - * - * This checks the link condition of the adapter and stores the - * results in the hw->mac structure. This is a function pointer entry - * point called by drivers. - **/ -s32 e1000_check_for_link(struct e1000_hw *hw) -{ - if (hw->mac.ops.check_for_link) - return hw->mac.ops.check_for_link(hw); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_check_mng_mode - Check management mode - * @hw: pointer to the HW structure - * - * This checks if the adapter has manageability enabled. - * This is a function pointer entry point called by drivers. - **/ -bool e1000_check_mng_mode(struct e1000_hw *hw) -{ - if (hw->mac.ops.check_mng_mode) - return hw->mac.ops.check_mng_mode(hw); - - return false; -} - -/** - * e1000_mng_write_dhcp_info - Writes DHCP info to host interface - * @hw: pointer to the HW structure - * @buffer: pointer to the host interface - * @length: size of the buffer - * - * Writes the DHCP information to the host interface. - **/ -s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) -{ - return e1000_mng_write_dhcp_info_generic(hw, buffer, length); -} - -/** - * e1000_reset_hw - Reset hardware - * @hw: pointer to the HW structure - * - * This resets the hardware into a known state. This is a function pointer - * entry point called by drivers. - **/ -s32 e1000_reset_hw(struct e1000_hw *hw) -{ - if (hw->mac.ops.reset_hw) - return hw->mac.ops.reset_hw(hw); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_init_hw - Initialize hardware - * @hw: pointer to the HW structure - * - * This inits the hardware readying it for operation. This is a function - * pointer entry point called by drivers. - **/ -s32 e1000_init_hw(struct e1000_hw *hw) -{ - if (hw->mac.ops.init_hw) - return hw->mac.ops.init_hw(hw); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_setup_link - Configures link and flow control - * @hw: pointer to the HW structure - * - * This configures link and flow control settings for the adapter. This - * is a function pointer entry point called by drivers. While modules can - * also call this, they probably call their own version of this function. - **/ -s32 e1000_setup_link(struct e1000_hw *hw) -{ - if (hw->mac.ops.setup_link) - return hw->mac.ops.setup_link(hw); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_get_speed_and_duplex - Returns current speed and duplex - * @hw: pointer to the HW structure - * @speed: pointer to a 16-bit value to store the speed - * @duplex: pointer to a 16-bit value to store the duplex. - * - * This returns the speed and duplex of the adapter in the two 'out' - * variables passed in. This is a function pointer entry point called - * by drivers. - **/ -s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) -{ - if (hw->mac.ops.get_link_up_info) - return hw->mac.ops.get_link_up_info(hw, speed, duplex); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_setup_led - Configures SW controllable LED - * @hw: pointer to the HW structure - * - * This prepares the SW controllable LED for use and saves the current state - * of the LED so it can be later restored. This is a function pointer entry - * point called by drivers. - **/ -s32 e1000_setup_led(struct e1000_hw *hw) -{ - if (hw->mac.ops.setup_led) - return hw->mac.ops.setup_led(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_cleanup_led - Restores SW controllable LED - * @hw: pointer to the HW structure - * - * This restores the SW controllable LED to the value saved off by - * e1000_setup_led. This is a function pointer entry point called by drivers. - **/ -s32 e1000_cleanup_led(struct e1000_hw *hw) -{ - if (hw->mac.ops.cleanup_led) - return hw->mac.ops.cleanup_led(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_blink_led - Blink SW controllable LED - * @hw: pointer to the HW structure - * - * This starts the adapter LED blinking. Request the LED to be setup first - * and cleaned up after. This is a function pointer entry point called by - * drivers. - **/ -s32 e1000_blink_led(struct e1000_hw *hw) -{ - if (hw->mac.ops.blink_led) - return hw->mac.ops.blink_led(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_id_led_init - store LED configurations in SW - * @hw: pointer to the HW structure - * - * Initializes the LED config in SW. This is a function pointer entry point - * called by drivers. - **/ -s32 e1000_id_led_init(struct e1000_hw *hw) -{ - if (hw->mac.ops.id_led_init) - return hw->mac.ops.id_led_init(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_led_on - Turn on SW controllable LED - * @hw: pointer to the HW structure - * - * Turns the SW defined LED on. This is a function pointer entry point - * called by drivers. - **/ -s32 e1000_led_on(struct e1000_hw *hw) -{ - if (hw->mac.ops.led_on) - return hw->mac.ops.led_on(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_led_off - Turn off SW controllable LED - * @hw: pointer to the HW structure - * - * Turns the SW defined LED off. This is a function pointer entry point - * called by drivers. - **/ -s32 e1000_led_off(struct e1000_hw *hw) -{ - if (hw->mac.ops.led_off) - return hw->mac.ops.led_off(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_reset_adaptive - Reset adaptive IFS - * @hw: pointer to the HW structure - * - * Resets the adaptive IFS. Currently no func pointer exists and all - * implementations are handled in the generic version of this function. - **/ -void e1000_reset_adaptive(struct e1000_hw *hw) -{ - e1000_reset_adaptive_generic(hw); -} - -/** - * e1000_update_adaptive - Update adaptive IFS - * @hw: pointer to the HW structure - * - * Updates adapter IFS. Currently no func pointer exists and all - * implementations are handled in the generic version of this function. - **/ -void e1000_update_adaptive(struct e1000_hw *hw) -{ - e1000_update_adaptive_generic(hw); -} - -/** - * e1000_disable_pcie_master - Disable PCI-Express master access - * @hw: pointer to the HW structure - * - * Disables PCI-Express master access and verifies there are no pending - * requests. Currently no func pointer exists and all implementations are - * handled in the generic version of this function. - **/ -s32 e1000_disable_pcie_master(struct e1000_hw *hw) -{ - return e1000_disable_pcie_master_generic(hw); -} - -/** - * e1000_config_collision_dist - Configure collision distance - * @hw: pointer to the HW structure - * - * Configures the collision distance to the default value and is used - * during link setup. - **/ -void e1000_config_collision_dist(struct e1000_hw *hw) -{ - if (hw->mac.ops.config_collision_dist) - hw->mac.ops.config_collision_dist(hw); -} - -/** - * e1000_rar_set - Sets a receive address register - * @hw: pointer to the HW structure - * @addr: address to set the RAR to - * @index: the RAR to set - * - * Sets a Receive Address Register (RAR) to the specified address. - **/ -void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) -{ - if (hw->mac.ops.rar_set) - hw->mac.ops.rar_set(hw, addr, index); -} - -/** - * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state - * @hw: pointer to the HW structure - * - * Ensures that the MDI/MDIX SW state is valid. - **/ -s32 e1000_validate_mdi_setting(struct e1000_hw *hw) -{ - if (hw->mac.ops.validate_mdi_setting) - return hw->mac.ops.validate_mdi_setting(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_hash_mc_addr - Determines address location in multicast table - * @hw: pointer to the HW structure - * @mc_addr: Multicast address to hash. - * - * This hashes an address to determine its location in the multicast - * table. Currently no func pointer exists and all implementations - * are handled in the generic version of this function. - **/ -u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) -{ - return e1000_hash_mc_addr_generic(hw, mc_addr); -} - -/** - * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX - * @hw: pointer to the HW structure - * - * Enables packet filtering on transmit packets if manageability is enabled - * and host interface is enabled. - * Currently no func pointer exists and all implementations are handled in the - * generic version of this function. - **/ -bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) -{ - return e1000_enable_tx_pkt_filtering_generic(hw); -} - -/** - * e1000_mng_host_if_write - Writes to the manageability host interface - * @hw: pointer to the HW structure - * @buffer: pointer to the host interface buffer - * @length: size of the buffer - * @offset: location in the buffer to write to - * @sum: sum of the data (not checksum) - * - * This function writes the buffer content at the offset given on the host if. - * It also does alignment considerations to do the writes in most efficient - * way. Also fills up the sum of the buffer in *buffer parameter. - **/ -s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, - u16 offset, u8 *sum) -{ - return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum); -} - -/** - * e1000_mng_write_cmd_header - Writes manageability command header - * @hw: pointer to the HW structure - * @hdr: pointer to the host interface command header - * - * Writes the command header after does the checksum calculation. - **/ -s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr) -{ - return e1000_mng_write_cmd_header_generic(hw, hdr); -} - -/** - * e1000_mng_enable_host_if - Checks host interface is enabled - * @hw: pointer to the HW structure - * - * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND - * - * This function checks whether the HOST IF is enabled for command operation - * and also checks whether the previous command is completed. It busy waits - * in case of previous command is not completed. - **/ -s32 e1000_mng_enable_host_if(struct e1000_hw *hw) -{ - return e1000_mng_enable_host_if_generic(hw); -} - -/** - * e1000_check_reset_block - Verifies PHY can be reset - * @hw: pointer to the HW structure - * - * Checks if the PHY is in a state that can be reset or if manageability - * has it tied up. This is a function pointer entry point called by drivers. - **/ -s32 e1000_check_reset_block(struct e1000_hw *hw) -{ - if (hw->phy.ops.check_reset_block) - return hw->phy.ops.check_reset_block(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_read_phy_reg - Reads PHY register - * @hw: pointer to the HW structure - * @offset: the register to read - * @data: the buffer to store the 16-bit read. - * - * Reads the PHY register and returns the value in data. - * This is a function pointer entry point called by drivers. - **/ -s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) -{ - if (hw->phy.ops.read_reg) - return hw->phy.ops.read_reg(hw, offset, data); - - return E1000_SUCCESS; -} - -/** - * e1000_write_phy_reg - Writes PHY register - * @hw: pointer to the HW structure - * @offset: the register to write - * @data: the value to write. - * - * Writes the PHY register at offset with the value in data. - * This is a function pointer entry point called by drivers. - **/ -s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) -{ - if (hw->phy.ops.write_reg) - return hw->phy.ops.write_reg(hw, offset, data); - - return E1000_SUCCESS; -} - -/** - * e1000_release_phy - Generic release PHY - * @hw: pointer to the HW structure - * - * Return if silicon family does not require a semaphore when accessing the - * PHY. - **/ -void e1000_release_phy(struct e1000_hw *hw) -{ - if (hw->phy.ops.release) - hw->phy.ops.release(hw); -} - -/** - * e1000_acquire_phy - Generic acquire PHY - * @hw: pointer to the HW structure - * - * Return success if silicon family does not require a semaphore when - * accessing the PHY. - **/ -s32 e1000_acquire_phy(struct e1000_hw *hw) -{ - if (hw->phy.ops.acquire) - return hw->phy.ops.acquire(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_read_kmrn_reg - Reads register using Kumeran interface - * @hw: pointer to the HW structure - * @offset: the register to read - * @data: the location to store the 16-bit value read. - * - * Reads a register out of the Kumeran interface. Currently no func pointer - * exists and all implementations are handled in the generic version of - * this function. - **/ -s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) -{ - return e1000_read_kmrn_reg_generic(hw, offset, data); -} - -/** - * e1000_write_kmrn_reg - Writes register using Kumeran interface - * @hw: pointer to the HW structure - * @offset: the register to write - * @data: the value to write. - * - * Writes a register to the Kumeran interface. Currently no func pointer - * exists and all implementations are handled in the generic version of - * this function. - **/ -s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) -{ - return e1000_write_kmrn_reg_generic(hw, offset, data); -} - -/** - * e1000_get_cable_length - Retrieves cable length estimation - * @hw: pointer to the HW structure - * - * This function estimates the cable length and stores them in - * hw->phy.min_length and hw->phy.max_length. This is a function pointer - * entry point called by drivers. - **/ -s32 e1000_get_cable_length(struct e1000_hw *hw) -{ - if (hw->phy.ops.get_cable_length) - return hw->phy.ops.get_cable_length(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_get_phy_info - Retrieves PHY information from registers - * @hw: pointer to the HW structure - * - * This function gets some information from various PHY registers and - * populates hw->phy values with it. This is a function pointer entry - * point called by drivers. - **/ -s32 e1000_get_phy_info(struct e1000_hw *hw) -{ - if (hw->phy.ops.get_info) - return hw->phy.ops.get_info(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_phy_hw_reset - Hard PHY reset - * @hw: pointer to the HW structure - * - * Performs a hard PHY reset. This is a function pointer entry point called - * by drivers. - **/ -s32 e1000_phy_hw_reset(struct e1000_hw *hw) -{ - if (hw->phy.ops.reset) - return hw->phy.ops.reset(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_phy_commit - Soft PHY reset - * @hw: pointer to the HW structure - * - * Performs a soft PHY reset on those that apply. This is a function pointer - * entry point called by drivers. - **/ -s32 e1000_phy_commit(struct e1000_hw *hw) -{ - if (hw->phy.ops.commit) - return hw->phy.ops.commit(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_set_d0_lplu_state - Sets low power link up state for D0 - * @hw: pointer to the HW structure - * @active: boolean used to enable/disable lplu - * - * Success returns 0, Failure returns 1 - * - * The low power link up (lplu) state is set to the power management level D0 - * and SmartSpeed is disabled when active is true, else clear lplu for D0 - * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU - * is used during Dx states where the power conservation is most important. - * During driver activity, SmartSpeed should be enabled so performance is - * maintained. This is a function pointer entry point called by drivers. - **/ -s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) -{ - if (hw->phy.ops.set_d0_lplu_state) - return hw->phy.ops.set_d0_lplu_state(hw, active); - - return E1000_SUCCESS; -} - -/** - * e1000_set_d3_lplu_state - Sets low power link up state for D3 - * @hw: pointer to the HW structure - * @active: boolean used to enable/disable lplu - * - * Success returns 0, Failure returns 1 - * - * The low power link up (lplu) state is set to the power management level D3 - * and SmartSpeed is disabled when active is true, else clear lplu for D3 - * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU - * is used during Dx states where the power conservation is most important. - * During driver activity, SmartSpeed should be enabled so performance is - * maintained. This is a function pointer entry point called by drivers. - **/ -s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) -{ - if (hw->phy.ops.set_d3_lplu_state) - return hw->phy.ops.set_d3_lplu_state(hw, active); - - return E1000_SUCCESS; -} - -/** - * e1000_read_mac_addr - Reads MAC address - * @hw: pointer to the HW structure - * - * Reads the MAC address out of the adapter and stores it in the HW structure. - * Currently no func pointer exists and all implementations are handled in the - * generic version of this function. - **/ -s32 e1000_read_mac_addr(struct e1000_hw *hw) -{ - if (hw->mac.ops.read_mac_addr) - return hw->mac.ops.read_mac_addr(hw); - - return e1000_read_mac_addr_generic(hw); -} - -/** - * e1000_read_pba_string - Read device part number string - * @hw: pointer to the HW structure - * @pba_num: pointer to device part number - * @pba_num_size: size of part number buffer - * - * Reads the product board assembly (PBA) number from the EEPROM and stores - * the value in pba_num. - * Currently no func pointer exists and all implementations are handled in the - * generic version of this function. - **/ -s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size) -{ - return e1000_read_pba_string_generic(hw, pba_num, pba_num_size); -} - -/** - * e1000_read_pba_length - Read device part number string length - * @hw: pointer to the HW structure - * @pba_num_size: size of part number buffer - * - * Reads the product board assembly (PBA) number length from the EEPROM and - * stores the value in pba_num. - * Currently no func pointer exists and all implementations are handled in the - * generic version of this function. - **/ -s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size) -{ - return e1000_read_pba_length_generic(hw, pba_num_size); -} - -/** - * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum - * @hw: pointer to the HW structure - * - * Validates the NVM checksum is correct. This is a function pointer entry - * point called by drivers. - **/ -s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) -{ - if (hw->nvm.ops.validate) - return hw->nvm.ops.validate(hw); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum - * @hw: pointer to the HW structure - * - * Updates the NVM checksum. Currently no func pointer exists and all - * implementations are handled in the generic version of this function. - **/ -s32 e1000_update_nvm_checksum(struct e1000_hw *hw) -{ - if (hw->nvm.ops.update) - return hw->nvm.ops.update(hw); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_reload_nvm - Reloads EEPROM - * @hw: pointer to the HW structure - * - * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the - * extended control register. - **/ -void e1000_reload_nvm(struct e1000_hw *hw) -{ - if (hw->nvm.ops.reload) - hw->nvm.ops.reload(hw); -} - -/** - * e1000_read_nvm - Reads NVM (EEPROM) - * @hw: pointer to the HW structure - * @offset: the word offset to read - * @words: number of 16-bit words to read - * @data: pointer to the properly sized buffer for the data. - * - * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function - * pointer entry point called by drivers. - **/ -s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - if (hw->nvm.ops.read) - return hw->nvm.ops.read(hw, offset, words, data); - - return -E1000_ERR_CONFIG; -} - -/** - * e1000_write_nvm - Writes to NVM (EEPROM) - * @hw: pointer to the HW structure - * @offset: the word offset to read - * @words: number of 16-bit words to write - * @data: pointer to the properly sized buffer for the data. - * - * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function - * pointer entry point called by drivers. - **/ -s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - if (hw->nvm.ops.write) - return hw->nvm.ops.write(hw, offset, words, data); - - return E1000_SUCCESS; -} - -/** - * e1000_write_8bit_ctrl_reg - Writes 8bit Control register - * @hw: pointer to the HW structure - * @reg: 32bit register offset - * @offset: the register to write - * @data: the value to write. - * - * Writes the PHY register at offset with the value in data. - * This is a function pointer entry point called by drivers. - **/ -s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, - u8 data) -{ - return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); -} - -/** - * e1000_power_up_phy - Restores link in case of PHY power down - * @hw: pointer to the HW structure - * - * The phy may be powered down to save power, to turn off link when the - * driver is unloaded, or wake on lan is not enabled (among others). - **/ -void e1000_power_up_phy(struct e1000_hw *hw) -{ - if (hw->phy.ops.power_up) - hw->phy.ops.power_up(hw); - - e1000_setup_link(hw); -} - -/** - * e1000_power_down_phy - Power down PHY - * @hw: pointer to the HW structure - * - * The phy may be powered down to save power, to turn off link when the - * driver is unloaded, or wake on lan is not enabled (among others). - **/ -void e1000_power_down_phy(struct e1000_hw *hw) -{ - if (hw->phy.ops.power_down) - hw->phy.ops.power_down(hw); -} - -/** - * e1000_power_up_fiber_serdes_link - Power up serdes link - * @hw: pointer to the HW structure - * - * Power on the optics and PCS. - **/ -void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw) -{ - if (hw->mac.ops.power_up_serdes) - hw->mac.ops.power_up_serdes(hw); -} - -/** - * e1000_shutdown_fiber_serdes_link - Remove link during power down - * @hw: pointer to the HW structure - * - * Shutdown the optics and PCS on driver unload. - **/ -void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw) -{ - if (hw->mac.ops.shutdown_serdes) - hw->mac.ops.shutdown_serdes(hw); -} - -/** - * e1000_get_thermal_sensor_data - Gathers thermal sensor data - * @hw: pointer to hardware structure - * - * Updates the temperatures in mac.thermal_sensor_data - **/ -s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw) -{ - if (hw->mac.ops.get_thermal_sensor_data) - return hw->mac.ops.get_thermal_sensor_data(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_init_thermal_sensor_thresh - Sets thermal sensor thresholds - * @hw: pointer to hardware structure - * - * Sets the thermal sensor thresholds according to the NVM map - **/ -s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw) -{ - if (hw->mac.ops.init_thermal_sensor_thresh) - return hw->mac.ops.init_thermal_sensor_thresh(hw); - - return E1000_SUCCESS; -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.h b/kernel/linux/kni/ethtool/igb/e1000_api.h deleted file mode 100644 index 0bc00acdf0..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_api.h +++ /dev/null @@ -1,142 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_API_H_ -#define _E1000_API_H_ - -#include "e1000_hw.h" - -extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); -extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw); -extern void e1000_init_function_pointers_vf(struct e1000_hw *hw); -extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw); -extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw); -extern void e1000_init_function_pointers_i210(struct e1000_hw *hw); - -s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr); -s32 e1000_set_mac_type(struct e1000_hw *hw); -s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device); -s32 e1000_init_mac_params(struct e1000_hw *hw); -s32 e1000_init_nvm_params(struct e1000_hw *hw); -s32 e1000_init_phy_params(struct e1000_hw *hw); -s32 e1000_init_mbx_params(struct e1000_hw *hw); -s32 e1000_get_bus_info(struct e1000_hw *hw); -void e1000_clear_vfta(struct e1000_hw *hw); -void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); -s32 e1000_force_mac_fc(struct e1000_hw *hw); -s32 e1000_check_for_link(struct e1000_hw *hw); -s32 e1000_reset_hw(struct e1000_hw *hw); -s32 e1000_init_hw(struct e1000_hw *hw); -s32 e1000_setup_link(struct e1000_hw *hw); -s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex); -s32 e1000_disable_pcie_master(struct e1000_hw *hw); -void e1000_config_collision_dist(struct e1000_hw *hw); -void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); -u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); -void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count); -s32 e1000_setup_led(struct e1000_hw *hw); -s32 e1000_cleanup_led(struct e1000_hw *hw); -s32 e1000_check_reset_block(struct e1000_hw *hw); -s32 e1000_blink_led(struct e1000_hw *hw); -s32 e1000_led_on(struct e1000_hw *hw); -s32 e1000_led_off(struct e1000_hw *hw); -s32 e1000_id_led_init(struct e1000_hw *hw); -void e1000_reset_adaptive(struct e1000_hw *hw); -void e1000_update_adaptive(struct e1000_hw *hw); -s32 e1000_get_cable_length(struct e1000_hw *hw); -s32 e1000_validate_mdi_setting(struct e1000_hw *hw); -s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, - u8 data); -s32 e1000_get_phy_info(struct e1000_hw *hw); -void e1000_release_phy(struct e1000_hw *hw); -s32 e1000_acquire_phy(struct e1000_hw *hw); -s32 e1000_phy_hw_reset(struct e1000_hw *hw); -s32 e1000_phy_commit(struct e1000_hw *hw); -void e1000_power_up_phy(struct e1000_hw *hw); -void e1000_power_down_phy(struct e1000_hw *hw); -s32 e1000_read_mac_addr(struct e1000_hw *hw); -s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size); -s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size); -void e1000_reload_nvm(struct e1000_hw *hw); -s32 e1000_update_nvm_checksum(struct e1000_hw *hw); -s32 e1000_validate_nvm_checksum(struct e1000_hw *hw); -s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); -s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); -bool e1000_check_mng_mode(struct e1000_hw *hw); -bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); -s32 e1000_mng_enable_host_if(struct e1000_hw *hw); -s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, - u16 offset, u8 *sum); -s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr); -s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); -s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw); -s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw); - - - -/* - * TBI_ACCEPT macro definition: - * - * This macro requires: - * adapter = a pointer to struct e1000_hw - * status = the 8 bit status field of the Rx descriptor with EOP set - * error = the 8 bit error field of the Rx descriptor with EOP set - * length = the sum of all the length fields of the Rx descriptors that - * make up the current frame - * last_byte = the last byte of the frame DMAed by the hardware - * max_frame_length = the maximum frame length we want to accept. - * min_frame_length = the minimum frame length we want to accept. - * - * This macro is a conditional that should be used in the interrupt - * handler's Rx processing routine when RxErrors have been detected. - * - * Typical use: - * ... - * if (TBI_ACCEPT) { - * accept_frame = true; - * e1000_tbi_adjust_stats(adapter, MacAddress); - * frame_length--; - * } else { - * accept_frame = false; - * } - * ... - */ - -/* The carrier extension symbol, as received by the NIC. */ -#define CARRIER_EXTENSION 0x0F - -#define TBI_ACCEPT(a, status, errors, length, last_byte, \ - min_frame_size, max_frame_size) \ - (e1000_tbi_sbp_enabled_82543(a) && \ - (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ - ((last_byte) == CARRIER_EXTENSION) && \ - (((status) & E1000_RXD_STAT_VP) ? \ - (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \ - ((length) <= (max_frame_size + 1))) : \ - (((length) > min_frame_size) && \ - ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1))))) - -#ifndef E1000_MAX -#define E1000_MAX(a, b) ((a) > (b) ? (a) : (b)) -#endif -#ifndef E1000_DIVIDE_ROUND_UP -#define E1000_DIVIDE_ROUND_UP(a, b) (((a) + (b) - 1) / (b)) /* ceil(a/b) */ -#endif -#endif /* _E1000_API_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_defines.h b/kernel/linux/kni/ethtool/igb/e1000_defines.h deleted file mode 100644 index b39aaf80aa..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_defines.h +++ /dev/null @@ -1,1365 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_DEFINES_H_ -#define _E1000_DEFINES_H_ - -/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ -#define REQ_TX_DESCRIPTOR_MULTIPLE 8 -#define REQ_RX_DESCRIPTOR_MULTIPLE 8 - -/* Definitions for power management and wakeup registers */ -/* Wake Up Control */ -#define E1000_WUC_APME 0x00000001 /* APM Enable */ -#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ -#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ -#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ -#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ - -/* Wake Up Filter Control */ -#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ -#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ -#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ -#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ -#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ -#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ -#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ -#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ - -/* Wake Up Status */ -#define E1000_WUS_LNKC E1000_WUFC_LNKC -#define E1000_WUS_MAG E1000_WUFC_MAG -#define E1000_WUS_EX E1000_WUFC_EX -#define E1000_WUS_MC E1000_WUFC_MC -#define E1000_WUS_BC E1000_WUFC_BC - -/* Extended Device Control */ -#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* SW Definable Pin 4 data */ -#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* SW Definable Pin 6 data */ -#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* SW Definable Pin 3 data */ -#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ -#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */ -#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ -/* Physical Func Reset Done Indication */ -#define E1000_CTRL_EXT_PFRSTD 0x00004000 -#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ -#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ -#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clk Gating */ -#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 -/* Offset of the link mode field in Ctrl Ext register */ -#define E1000_CTRL_EXT_LINK_MODE_OFFSET 22 -#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 -#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 -#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 -#define E1000_CTRL_EXT_EIAME 0x01000000 -#define E1000_CTRL_EXT_IRCA 0x00000001 -#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ -#define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */ -#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ -#define E1000_I2CCMD_REG_ADDR_SHIFT 16 -#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 -#define E1000_I2CCMD_OPCODE_READ 0x08000000 -#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 -#define E1000_I2CCMD_READY 0x20000000 -#define E1000_I2CCMD_ERROR 0x80000000 -#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a)) -#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a)) -#define E1000_MAX_SGMII_PHY_REG_ADDR 255 -#define E1000_I2CCMD_PHY_TIMEOUT 200 -#define E1000_IVAR_VALID 0x80 -#define E1000_GPIE_NSICR 0x00000001 -#define E1000_GPIE_MSIX_MODE 0x00000010 -#define E1000_GPIE_EIAME 0x40000000 -#define E1000_GPIE_PBA 0x80000000 - -/* Receive Descriptor bit definitions */ -#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ -#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ -#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ -#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ -#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ -#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ -#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ -#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ -#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ -#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ -#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ -#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ -#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ -#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ -#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ -#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ -#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ -#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ - -#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */ -#define E1000_RXDEXT_STATERR_LB 0x00040000 -#define E1000_RXDEXT_STATERR_CE 0x01000000 -#define E1000_RXDEXT_STATERR_SE 0x02000000 -#define E1000_RXDEXT_STATERR_SEQ 0x04000000 -#define E1000_RXDEXT_STATERR_CXE 0x10000000 -#define E1000_RXDEXT_STATERR_TCPE 0x20000000 -#define E1000_RXDEXT_STATERR_IPE 0x40000000 -#define E1000_RXDEXT_STATERR_RXE 0x80000000 - -/* mask to determine if packets should be dropped due to frame errors */ -#define E1000_RXD_ERR_FRAME_ERR_MASK ( \ - E1000_RXD_ERR_CE | \ - E1000_RXD_ERR_SE | \ - E1000_RXD_ERR_SEQ | \ - E1000_RXD_ERR_CXE | \ - E1000_RXD_ERR_RXE) - -/* Same mask, but for extended and packet split descriptors */ -#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ - E1000_RXDEXT_STATERR_CE | \ - E1000_RXDEXT_STATERR_SE | \ - E1000_RXDEXT_STATERR_SEQ | \ - E1000_RXDEXT_STATERR_CXE | \ - E1000_RXDEXT_STATERR_RXE) - -#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 -#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 -#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 -#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 -#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 -#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 - -#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 - -/* Management Control */ -#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ -#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ -#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ -#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ -#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ -/* Enable MAC address filtering */ -#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 -/* Enable MNG packets to host memory */ -#define E1000_MANC_EN_MNG2HOST 0x00200000 - -#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */ -#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */ -#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */ -#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */ - -/* Receive Control */ -#define E1000_RCTL_RST 0x00000001 /* Software reset */ -#define E1000_RCTL_EN 0x00000002 /* enable */ -#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ -#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */ -#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */ -#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ -#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ -#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ -#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ -#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ -#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ -#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ -#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ -#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ -/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ -#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ -#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ -#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ -#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ -/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ -#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ -#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ -#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ -#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ -#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ -#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ -#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ -#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ -#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ -#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ - -/* Use byte values for the following shift parameters - * Usage: - * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & - * E1000_PSRCTL_BSIZE0_MASK) | - * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & - * E1000_PSRCTL_BSIZE1_MASK) | - * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & - * E1000_PSRCTL_BSIZE2_MASK) | - * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; - * E1000_PSRCTL_BSIZE3_MASK)) - * where value0 = [128..16256], default=256 - * value1 = [1024..64512], default=4096 - * value2 = [0..64512], default=4096 - * value3 = [0..64512], default=0 - */ - -#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F -#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 -#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 -#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 - -#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ -#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ -#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ -#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ - -/* SWFW_SYNC Definitions */ -#define E1000_SWFW_EEP_SM 0x01 -#define E1000_SWFW_PHY0_SM 0x02 -#define E1000_SWFW_PHY1_SM 0x04 -#define E1000_SWFW_CSR_SM 0x08 -#define E1000_SWFW_PHY2_SM 0x20 -#define E1000_SWFW_PHY3_SM 0x40 -#define E1000_SWFW_SW_MNG_SM 0x400 - -/* Device Control */ -#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ -#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ -#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */ -#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ -#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ -#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ -#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ -#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ -#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ -#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ -#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ -#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ -#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ -#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ -#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ -#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ -#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ -#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ -#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ -#define E1000_CTRL_RST 0x04000000 /* Global reset */ -#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ -#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ -#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ -#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */ - - -#define E1000_CONNSW_ENRGSRC 0x4 -#define E1000_CONNSW_PHYSD 0x400 -#define E1000_CONNSW_PHY_PDN 0x800 -#define E1000_CONNSW_SERDESD 0x200 -#define E1000_CONNSW_AUTOSENSE_CONF 0x2 -#define E1000_CONNSW_AUTOSENSE_EN 0x1 -#define E1000_PCS_CFG_PCS_EN 8 -#define E1000_PCS_LCTL_FLV_LINK_UP 1 -#define E1000_PCS_LCTL_FSV_10 0 -#define E1000_PCS_LCTL_FSV_100 2 -#define E1000_PCS_LCTL_FSV_1000 4 -#define E1000_PCS_LCTL_FDV_FULL 8 -#define E1000_PCS_LCTL_FSD 0x10 -#define E1000_PCS_LCTL_FORCE_LINK 0x20 -#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 -#define E1000_PCS_LCTL_AN_ENABLE 0x10000 -#define E1000_PCS_LCTL_AN_RESTART 0x20000 -#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 -#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 - -#define E1000_PCS_LSTS_LINK_OK 1 -#define E1000_PCS_LSTS_SPEED_100 2 -#define E1000_PCS_LSTS_SPEED_1000 4 -#define E1000_PCS_LSTS_DUPLEX_FULL 8 -#define E1000_PCS_LSTS_SYNK_OK 0x10 -#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 - -/* Device Status */ -#define E1000_STATUS_FD 0x00000001 /* Duplex 0=half 1=full */ -#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ -#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ -#define E1000_STATUS_FUNC_SHIFT 2 -#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ -#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ -#define E1000_STATUS_SPEED_MASK 0x000000C0 -#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ -#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ -#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ -#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Compltn by NVM */ -#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ -#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */ -#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */ -#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */ - -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define SPEED_2500 2500 -#define HALF_DUPLEX 1 -#define FULL_DUPLEX 2 - - -#define ADVERTISE_10_HALF 0x0001 -#define ADVERTISE_10_FULL 0x0002 -#define ADVERTISE_100_HALF 0x0004 -#define ADVERTISE_100_FULL 0x0008 -#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ -#define ADVERTISE_1000_FULL 0x0020 - -/* 1000/H is not supported, nor spec-compliant. */ -#define E1000_ALL_SPEED_DUPLEX ( \ - ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ - ADVERTISE_100_FULL | ADVERTISE_1000_FULL) -#define E1000_ALL_NOT_GIG ( \ - ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ - ADVERTISE_100_FULL) -#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) -#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) -#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) - -#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX - -/* LED Control */ -#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F -#define E1000_LEDCTL_LED0_MODE_SHIFT 0 -#define E1000_LEDCTL_LED0_IVRT 0x00000040 -#define E1000_LEDCTL_LED0_BLINK 0x00000080 - -#define E1000_LEDCTL_MODE_LED_ON 0xE -#define E1000_LEDCTL_MODE_LED_OFF 0xF - -/* Transmit Descriptor bit definitions */ -#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ -#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ -#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ -#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ -#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ -#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ -#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ -#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ -#define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ -#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ -#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ -#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ -#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ -#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ -#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ -#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ -#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ -#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ -#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ -#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ - -/* Transmit Control */ -#define E1000_TCTL_EN 0x00000002 /* enable Tx */ -#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ -#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ -#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ -#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ -#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ - -/* Transmit Arbitration Count */ -#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */ - -/* SerDes Control */ -#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 -#define E1000_SCTL_ENABLE_SERDES_LOOPBACK 0x0410 - -/* Receive Checksum Control */ -#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ -#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ -#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */ -#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ -#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ - -/* Header split receive */ -#define E1000_RFCTL_NFSW_DIS 0x00000040 -#define E1000_RFCTL_NFSR_DIS 0x00000080 -#define E1000_RFCTL_ACK_DIS 0x00001000 -#define E1000_RFCTL_EXTEN 0x00008000 -#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 -#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 -#define E1000_RFCTL_LEF 0x00040000 - -/* Collision related configuration parameters */ -#define E1000_COLLISION_THRESHOLD 15 -#define E1000_CT_SHIFT 4 -#define E1000_COLLISION_DISTANCE 63 -#define E1000_COLD_SHIFT 12 - -/* Default values for the transmit IPG register */ -#define DEFAULT_82543_TIPG_IPGT_FIBER 9 -#define DEFAULT_82543_TIPG_IPGT_COPPER 8 - -#define E1000_TIPG_IPGT_MASK 0x000003FF - -#define DEFAULT_82543_TIPG_IPGR1 8 -#define E1000_TIPG_IPGR1_SHIFT 10 - -#define DEFAULT_82543_TIPG_IPGR2 6 -#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 -#define E1000_TIPG_IPGR2_SHIFT 20 - -/* Ethertype field values */ -#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ - -#define ETHERNET_FCS_SIZE 4 -#define MAX_JUMBO_FRAME_SIZE 0x3F00 - -/* Extended Configuration Control and Size */ -#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 -#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 -#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 -#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 -#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080 -#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 -#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 -#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000 -#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16 - -#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 -#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 -#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 -#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 - -#define E1000_KABGTXD_BGSQLBIAS 0x00050000 - -/* PBA constants */ -#define E1000_PBA_8K 0x0008 /* 8KB */ -#define E1000_PBA_10K 0x000A /* 10KB */ -#define E1000_PBA_12K 0x000C /* 12KB */ -#define E1000_PBA_14K 0x000E /* 14KB */ -#define E1000_PBA_16K 0x0010 /* 16KB */ -#define E1000_PBA_18K 0x0012 -#define E1000_PBA_20K 0x0014 -#define E1000_PBA_22K 0x0016 -#define E1000_PBA_24K 0x0018 -#define E1000_PBA_26K 0x001A -#define E1000_PBA_30K 0x001E -#define E1000_PBA_32K 0x0020 -#define E1000_PBA_34K 0x0022 -#define E1000_PBA_35K 0x0023 -#define E1000_PBA_38K 0x0026 -#define E1000_PBA_40K 0x0028 -#define E1000_PBA_48K 0x0030 /* 48KB */ -#define E1000_PBA_64K 0x0040 /* 64KB */ - -#define E1000_PBA_RXA_MASK 0xFFFF - -#define E1000_PBS_16K E1000_PBA_16K - -#define IFS_MAX 80 -#define IFS_MIN 40 -#define IFS_RATIO 4 -#define IFS_STEP 10 -#define MIN_NUM_XMITS 1000 - -/* SW Semaphore Register */ -#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ -#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ -#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ - -#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ - -/* Interrupt Cause Read */ -#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ -#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ -#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ -#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ -#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ -#define E1000_ICR_RXO 0x00000040 /* Rx overrun */ -#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ -#define E1000_ICR_VMMB 0x00000100 /* VM MB event */ -#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ -#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ -#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ -#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ -#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ -#define E1000_ICR_TXD_LOW 0x00008000 -#define E1000_ICR_MNG 0x00040000 /* Manageability event */ -#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */ -#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */ -/* If this bit asserted, the driver should claim the interrupt */ -#define E1000_ICR_INT_ASSERTED 0x80000000 -#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */ -#define E1000_ICR_FER 0x00400000 /* Fatal Error */ - -#define E1000_ICR_THS 0x00800000 /* ICR.THS: Thermal Sensor Event*/ -#define E1000_ICR_MDDET 0x10000000 /* Malicious Driver Detect */ - - -/* Extended Interrupt Cause Read */ -#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */ -#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */ -#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */ -#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */ -#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */ -#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */ -#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */ -#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */ -#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ -#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ -/* TCP Timer */ -#define E1000_TCPTIMER_KS 0x00000100 /* KickStart */ -#define E1000_TCPTIMER_COUNT_ENABLE 0x00000200 /* Count Enable */ -#define E1000_TCPTIMER_COUNT_FINISH 0x00000400 /* Count finish */ -#define E1000_TCPTIMER_LOOP 0x00000800 /* Loop */ - -/* This defines the bits that are set in the Interrupt Mask - * Set/Read Register. Each bit is documented below: - * o RXT0 = Receiver Timer Interrupt (ring 0) - * o TXDW = Transmit Descriptor Written Back - * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) - * o RXSEQ = Receive Sequence Error - * o LSC = Link Status Change - */ -#define IMS_ENABLE_MASK ( \ - E1000_IMS_RXT0 | \ - E1000_IMS_TXDW | \ - E1000_IMS_RXDMT0 | \ - E1000_IMS_RXSEQ | \ - E1000_IMS_LSC) - -/* Interrupt Mask Set */ -#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */ -#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */ -#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ -#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ -#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */ -#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ -#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW -#define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */ -#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */ -#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ -#define E1000_IMS_FER E1000_ICR_FER /* Fatal Error */ - -#define E1000_IMS_THS E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/ -#define E1000_IMS_MDDET E1000_ICR_MDDET /* Malicious Driver Detect */ -/* Extended Interrupt Mask Set */ -#define E1000_EIMS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ -#define E1000_EIMS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ -#define E1000_EIMS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ -#define E1000_EIMS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ -#define E1000_EIMS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ -#define E1000_EIMS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ -#define E1000_EIMS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ -#define E1000_EIMS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ -#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ -#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ - -/* Interrupt Cause Set */ -#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ -#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ - -/* Extended Interrupt Cause Set */ -#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ -#define E1000_EICS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ -#define E1000_EICS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ -#define E1000_EICS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ -#define E1000_EICS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ -#define E1000_EICS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ -#define E1000_EICS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ -#define E1000_EICS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ -#define E1000_EICS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ -#define E1000_EICS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ - -#define E1000_EITR_ITR_INT_MASK 0x0000FFFF -/* E1000_EITR_CNT_IGNR is only for 82576 and newer */ -#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */ -#define E1000_EITR_INTERVAL 0x00007FFC - -/* Transmit Descriptor Control */ -#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ -#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ -#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ -#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ -#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ -#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */ -/* Enable the counting of descriptors still to be processed. */ -#define E1000_TXDCTL_COUNT_DESC 0x00400000 - -/* Flow Control Constants */ -#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 -#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 -#define FLOW_CONTROL_TYPE 0x8808 - -/* 802.1q VLAN Packet Size */ -#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ -#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ - -/* Receive Address - * Number of high/low register pairs in the RAR. The RAR (Receive Address - * Registers) holds the directed and multicast addresses that we monitor. - * Technically, we have 16 spots. However, we reserve one of these spots - * (RAR[15]) for our directed address used by controllers with - * manageability enabled, allowing us room for 15 multicast addresses. - */ -#define E1000_RAR_ENTRIES 15 -#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ -#define E1000_RAL_MAC_ADDR_LEN 4 -#define E1000_RAH_MAC_ADDR_LEN 2 -#define E1000_RAH_QUEUE_MASK_82575 0x000C0000 -#define E1000_RAH_POOL_1 0x00040000 - -/* Error Codes */ -#define E1000_SUCCESS 0 -#define E1000_ERR_NVM 1 -#define E1000_ERR_PHY 2 -#define E1000_ERR_CONFIG 3 -#define E1000_ERR_PARAM 4 -#define E1000_ERR_MAC_INIT 5 -#define E1000_ERR_PHY_TYPE 6 -#define E1000_ERR_RESET 9 -#define E1000_ERR_MASTER_REQUESTS_PENDING 10 -#define E1000_ERR_HOST_INTERFACE_COMMAND 11 -#define E1000_BLK_PHY_RESET 12 -#define E1000_ERR_SWFW_SYNC 13 -#define E1000_NOT_IMPLEMENTED 14 -#define E1000_ERR_MBX 15 -#define E1000_ERR_INVALID_ARGUMENT 16 -#define E1000_ERR_NO_SPACE 17 -#define E1000_ERR_NVM_PBA_SECTION 18 -#define E1000_ERR_I2C 19 -#define E1000_ERR_INVM_VALUE_NOT_FOUND 20 - -/* Loop limit on how long we wait for auto-negotiation to complete */ -#define FIBER_LINK_UP_LIMIT 50 -#define COPPER_LINK_UP_LIMIT 10 -#define PHY_AUTO_NEG_LIMIT 45 -#define PHY_FORCE_LIMIT 20 -/* Number of 100 microseconds we wait for PCI Express master disable */ -#define MASTER_DISABLE_TIMEOUT 800 -/* Number of milliseconds we wait for PHY configuration done after MAC reset */ -#define PHY_CFG_TIMEOUT 100 -/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */ -#define MDIO_OWNERSHIP_TIMEOUT 10 -/* Number of milliseconds for NVM auto read done after MAC reset. */ -#define AUTO_READ_DONE_TIMEOUT 10 - -/* Flow Control */ -#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ -#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ -#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ - -/* Transmit Configuration Word */ -#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ -#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ -#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ -#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ -#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ - -/* Receive Configuration Word */ -#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ -#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ -#define E1000_RXCW_C 0x20000000 /* Receive config */ -#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ - -#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ -#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ - -#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ -#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ -#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 -#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 -#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 -#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 -#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A -#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ -#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ - -#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF -#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00 -#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01 -#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02 -#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03 -#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04 - -#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00 -#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000 -#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100 -#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200 -#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300 -#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800 -#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900 -#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00 -#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00 -#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00 -#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00 - -#define E1000_TIMINCA_16NS_SHIFT 24 -#define E1000_TIMINCA_INCPERIOD_SHIFT 24 -#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF - -#define E1000_TSICR_TXTS 0x00000002 -#define E1000_TSIM_TXTS 0x00000002 -/* TUPLE Filtering Configuration */ -#define E1000_TTQF_DISABLE_MASK 0xF0008000 /* TTQF Disable Mask */ -#define E1000_TTQF_QUEUE_ENABLE 0x100 /* TTQF Queue Enable Bit */ -#define E1000_TTQF_PROTOCOL_MASK 0xFF /* TTQF Protocol Mask */ -/* TTQF TCP Bit, shift with E1000_TTQF_PROTOCOL SHIFT */ -#define E1000_TTQF_PROTOCOL_TCP 0x0 -/* TTQF UDP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ -#define E1000_TTQF_PROTOCOL_UDP 0x1 -/* TTQF SCTP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ -#define E1000_TTQF_PROTOCOL_SCTP 0x2 -#define E1000_TTQF_PROTOCOL_SHIFT 5 /* TTQF Protocol Shift */ -#define E1000_TTQF_QUEUE_SHIFT 16 /* TTQF Queue Shfit */ -#define E1000_TTQF_RX_QUEUE_MASK 0x70000 /* TTQF Queue Mask */ -#define E1000_TTQF_MASK_ENABLE 0x10000000 /* TTQF Mask Enable Bit */ -#define E1000_IMIR_CLEAR_MASK 0xF001FFFF /* IMIR Reg Clear Mask */ -#define E1000_IMIR_PORT_BYPASS 0x20000 /* IMIR Port Bypass Bit */ -#define E1000_IMIR_PRIORITY_SHIFT 29 /* IMIR Priority Shift */ -#define E1000_IMIREXT_CLEAR_MASK 0x7FFFF /* IMIREXT Reg Clear Mask */ - -#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ -#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ -#define E1000_MDICNFG_PHY_MASK 0x03E00000 -#define E1000_MDICNFG_PHY_SHIFT 21 - -#define E1000_MEDIA_PORT_COPPER 1 -#define E1000_MEDIA_PORT_OTHER 2 -#define E1000_M88E1112_AUTO_COPPER_SGMII 0x2 -#define E1000_M88E1112_AUTO_COPPER_BASEX 0x3 -#define E1000_M88E1112_STATUS_LINK 0x0004 /* Interface Link Bit */ -#define E1000_M88E1112_MAC_CTRL_1 0x10 -#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK 0x0380 /* Mode Select */ -#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7 -#define E1000_M88E1112_PAGE_ADDR 0x16 -#define E1000_M88E1112_STATUS 0x01 - -#define E1000_THSTAT_LOW_EVENT 0x20000000 /* Low thermal threshold */ -#define E1000_THSTAT_MID_EVENT 0x00200000 /* Mid thermal threshold */ -#define E1000_THSTAT_HIGH_EVENT 0x00002000 /* High thermal threshold */ -#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */ -#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Spd Throttle Event */ - -/* I350 EEE defines */ -#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* IPCNFG EEE Ena 1G AN */ -#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* IPCNFG EEE Ena 100M AN */ -#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */ -#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */ -#define E1000_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */ -/* EEE status */ -#define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ -#define E1000_EEER_RX_LPI_STATUS 0x40000000 /* Rx in LPI state */ -#define E1000_EEER_TX_LPI_STATUS 0x80000000 /* Tx in LPI state */ -#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */ -#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */ -#define E1000_M88E1543_EEE_CTRL_1 0x0 -#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */ -#define E1000_EEE_ADV_DEV_I354 7 -#define E1000_EEE_ADV_ADDR_I354 60 -#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ -#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */ -#define E1000_PCS_STATUS_DEV_I354 3 -#define E1000_PCS_STATUS_ADDR_I354 1 -#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400 -#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800 -#define E1000_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */ -#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */ -#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */ -/* PCI Express Control */ -#define E1000_GCR_RXD_NO_SNOOP 0x00000001 -#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 -#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 -#define E1000_GCR_TXD_NO_SNOOP 0x00000008 -#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 -#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 -#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 -#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 -#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000 -#define E1000_GCR_CAP_VER2 0x00040000 - -#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ - E1000_GCR_RXDSCW_NO_SNOOP | \ - E1000_GCR_RXDSCR_NO_SNOOP | \ - E1000_GCR_TXD_NO_SNOOP | \ - E1000_GCR_TXDSCW_NO_SNOOP | \ - E1000_GCR_TXDSCR_NO_SNOOP) - -#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ - -/* mPHY address control and data registers */ -#define E1000_MPHY_ADDR_CTL 0x0024 /* Address Control Reg */ -#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000 -#define E1000_MPHY_DATA 0x0E10 /* Data Register */ - -/* AFE CSR Offset for PCS CLK */ -#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 -/* Override for near end digital loopback. */ -#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10 - -/* PHY Control Register */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 - -/* PHY Status Register */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ - -/* Autoneg Advertisement Register */ -#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ - -/* Link Partner Ability Register (Base Page) */ -#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ -#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP 10T Half Dplx Capable */ -#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP 10T Full Dplx Capable */ -#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP 100TX Half Dplx Capable */ -#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ -#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ -#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asym Pause Direction bit */ -#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP detected Remote Fault */ -#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP rx'd link code word */ -#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ - -/* Autoneg Expansion Register */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ -#define NWAY_ER_PAGE_RXD 0x0002 /* LP 10T Half Dplx Capable */ -#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP 10T Full Dplx Capable */ -#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP 100TX Half Dplx Capable */ -#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP 100TX Full Dplx Capable */ - -/* 1000BASE-T Control Register */ -#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ -/* 1=Repeater/switch device port 0=DTE device */ -#define CR_1000T_REPEATER_DTE 0x0400 -/* 1=Configure PHY as Master 0=Configure PHY as Slave */ -#define CR_1000T_MS_VALUE 0x0800 -/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ -#define CR_1000T_MS_ENABLE 0x1000 -#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ - -/* 1000BASE-T Status Register */ -#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle err since last rd */ -#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asym pause direction bit */ -#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ -#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local Tx Master, 0=Slave */ -#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ - -#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 - -/* PHY 1000 MII Register/Bit Definitions */ -/* PHY Registers defined by IEEE */ -#define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Register */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */ -#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ - -/* NVM Control */ -#define E1000_EECD_SK 0x00000001 /* NVM Clock */ -#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ -#define E1000_EECD_DI 0x00000004 /* NVM Data In */ -#define E1000_EECD_DO 0x00000008 /* NVM Data Out */ -#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ -#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ -#define E1000_EECD_PRES 0x00000100 /* NVM Present */ -#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ -#define E1000_EECD_BLOCKED 0x00008000 /* Bit banging access blocked flag */ -#define E1000_EECD_ABORT 0x00010000 /* NVM operation aborted flag */ -#define E1000_EECD_TIMEOUT 0x00020000 /* NVM read operation timeout flag */ -#define E1000_EECD_ERROR_CLR 0x00040000 /* NVM error status clear bit */ -/* NVM Addressing bits based on type 0=small, 1=large */ -#define E1000_EECD_ADDR_BITS 0x00000400 -#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ -#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ -#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ -#define E1000_EECD_SIZE_EX_SHIFT 11 -#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ -#define E1000_EECD_AUPDEN 0x00100000 /* Ena Auto FLASH update */ -#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ -#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES) -#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ -#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done */ -#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */ -#define E1000_EECD_SEC1VAL_I210 0x02000000 /* Sector One Valid */ -#define E1000_FLUDONE_ATTEMPTS 20000 -#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ -#define E1000_I210_FIFO_SEL_RX 0x00 -#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i)) -#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0) -#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 -#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 - -#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */ -/* Secure FLASH mode requires removing MSb */ -#define E1000_I210_FW_PTR_MASK 0x7FFF -/* Firmware code revision field word offset*/ -#define E1000_I210_FW_VER_OFFSET 328 - -#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */ -#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ -#define E1000_NVM_RW_REG_START 1 /* Start operation */ -#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ -#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ -#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ -#define E1000_FLASH_UPDATES 2000 - -/* NVM Word Offsets */ -#define NVM_COMPAT 0x0003 -#define NVM_ID_LED_SETTINGS 0x0004 -#define NVM_VERSION 0x0005 -#define E1000_I210_NVM_FW_MODULE_PTR 0x0010 -#define E1000_I350_NVM_FW_MODULE_PTR 0x0051 -#define NVM_FUTURE_INIT_WORD1 0x0019 -#define NVM_ETRACK_WORD 0x0042 -#define NVM_ETRACK_HIWORD 0x0043 -#define NVM_COMB_VER_OFF 0x0083 -#define NVM_COMB_VER_PTR 0x003d - -/* NVM version defines */ -#define NVM_MAJOR_MASK 0xF000 -#define NVM_MINOR_MASK 0x0FF0 -#define NVM_IMAGE_ID_MASK 0x000F -#define NVM_COMB_VER_MASK 0x00FF -#define NVM_MAJOR_SHIFT 12 -#define NVM_MINOR_SHIFT 4 -#define NVM_COMB_VER_SHFT 8 -#define NVM_VER_INVALID 0xFFFF -#define NVM_ETRACK_SHIFT 16 -#define NVM_ETRACK_VALID 0x8000 -#define NVM_NEW_DEC_MASK 0x0F00 -#define NVM_HEX_CONV 16 -#define NVM_HEX_TENS 10 - -/* FW version defines */ -/* Offset of "Loader patch ptr" in Firmware Header */ -#define E1000_I350_NVM_FW_LOADER_PATCH_PTR_OFFSET 0x01 -/* Patch generation hour & minutes */ -#define E1000_I350_NVM_FW_VER_WORD1_OFFSET 0x04 -/* Patch generation month & day */ -#define E1000_I350_NVM_FW_VER_WORD2_OFFSET 0x05 -/* Patch generation year */ -#define E1000_I350_NVM_FW_VER_WORD3_OFFSET 0x06 -/* Patch major & minor numbers */ -#define E1000_I350_NVM_FW_VER_WORD4_OFFSET 0x07 - -#define NVM_MAC_ADDR 0x0000 -#define NVM_SUB_DEV_ID 0x000B -#define NVM_SUB_VEN_ID 0x000C -#define NVM_DEV_ID 0x000D -#define NVM_VEN_ID 0x000E -#define NVM_INIT_CTRL_2 0x000F -#define NVM_INIT_CTRL_4 0x0013 -#define NVM_LED_1_CFG 0x001C -#define NVM_LED_0_2_CFG 0x001F - -#define NVM_COMPAT_VALID_CSUM 0x0001 -#define NVM_FUTURE_INIT_WORD1_VALID_CSUM 0x0040 - -#define NVM_ETS_CFG 0x003E -#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 -#define NVM_ETS_LTHRES_DELTA_SHIFT 6 -#define NVM_ETS_TYPE_MASK 0x0038 -#define NVM_ETS_TYPE_SHIFT 3 -#define NVM_ETS_TYPE_EMC 0x000 -#define NVM_ETS_NUM_SENSORS_MASK 0x0007 -#define NVM_ETS_DATA_LOC_MASK 0x3C00 -#define NVM_ETS_DATA_LOC_SHIFT 10 -#define NVM_ETS_DATA_INDEX_MASK 0x0300 -#define NVM_ETS_DATA_INDEX_SHIFT 8 -#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF -#define NVM_INIT_CONTROL2_REG 0x000F -#define NVM_INIT_CONTROL3_PORT_B 0x0014 -#define NVM_INIT_3GIO_3 0x001A -#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020 -#define NVM_INIT_CONTROL3_PORT_A 0x0024 -#define NVM_CFG 0x0012 -#define NVM_ALT_MAC_ADDR_PTR 0x0037 -#define NVM_CHECKSUM_REG 0x003F -#define NVM_COMPATIBILITY_REG_3 0x0003 -#define NVM_COMPATIBILITY_BIT_MASK 0x8000 - -#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ -#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ -#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */ -#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */ - -#define NVM_82580_LAN_FUNC_OFFSET(a) ((a) ? (0x40 + (0x40 * (a))) : 0) - -/* Mask bits for fields in Word 0x24 of the NVM */ -#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */ -#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed extrnl */ -/* Offset of Link Mode bits for 82575/82576 */ -#define NVM_WORD24_LNK_MODE_OFFSET 8 -/* Offset of Link Mode bits for 82580 up */ -#define NVM_WORD24_82580_LNK_MODE_OFFSET 4 - - -/* Mask bits for fields in Word 0x0f of the NVM */ -#define NVM_WORD0F_PAUSE_MASK 0x3000 -#define NVM_WORD0F_PAUSE 0x1000 -#define NVM_WORD0F_ASM_DIR 0x2000 - -/* Mask bits for fields in Word 0x1a of the NVM */ -#define NVM_WORD1A_ASPM_MASK 0x000C - -/* Mask bits for fields in Word 0x03 of the EEPROM */ -#define NVM_COMPAT_LOM 0x0800 - -/* length of string needed to store PBA number */ -#define E1000_PBANUM_LENGTH 11 - -/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ -#define NVM_SUM 0xBABA - -/* PBA (printed board assembly) number words */ -#define NVM_PBA_OFFSET_0 8 -#define NVM_PBA_OFFSET_1 9 -#define NVM_PBA_PTR_GUARD 0xFAFA -#define NVM_RESERVED_WORD 0xFFFF -#define NVM_WORD_SIZE_BASE_SHIFT 6 - -/* NVM Commands - SPI */ -#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ -#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */ -#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ -#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ -#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ -#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ - -/* SPI NVM Status Register */ -#define NVM_STATUS_RDY_SPI 0x01 - -/* Word definitions for ID LED Settings */ -#define ID_LED_RESERVED_0000 0x0000 -#define ID_LED_RESERVED_FFFF 0xFFFF -#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ - (ID_LED_OFF1_OFF2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_DEF1_DEF2)) -#define ID_LED_DEF1_DEF2 0x1 -#define ID_LED_DEF1_ON2 0x2 -#define ID_LED_DEF1_OFF2 0x3 -#define ID_LED_ON1_DEF2 0x4 -#define ID_LED_ON1_ON2 0x5 -#define ID_LED_ON1_OFF2 0x6 -#define ID_LED_OFF1_DEF2 0x7 -#define ID_LED_OFF1_ON2 0x8 -#define ID_LED_OFF1_OFF2 0x9 - -#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF -#define IGP_ACTIVITY_LED_ENABLE 0x0300 -#define IGP_LED3_MODE 0x07000000 - -/* PCI/PCI-X/PCI-EX Config space */ -#define PCI_HEADER_TYPE_REGISTER 0x0E -#define PCIE_LINK_STATUS 0x12 -#define PCIE_DEVICE_CONTROL2 0x28 - -#define PCI_HEADER_TYPE_MULTIFUNC 0x80 -#define PCIE_LINK_WIDTH_MASK 0x3F0 -#define PCIE_LINK_WIDTH_SHIFT 4 -#define PCIE_LINK_SPEED_MASK 0x0F -#define PCIE_LINK_SPEED_2500 0x01 -#define PCIE_LINK_SPEED_5000 0x02 -#define PCIE_DEVICE_CONTROL2_16ms 0x0005 - -#ifndef ETH_ADDR_LEN -#define ETH_ADDR_LEN 6 -#endif - -#define PHY_REVISION_MASK 0xFFFFFFF0 -#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ -#define MAX_PHY_MULTI_PAGE_REG 0xF - -/* Bit definitions for valid PHY IDs. - * I = Integrated - * E = External - */ -#define M88E1000_E_PHY_ID 0x01410C50 -#define M88E1000_I_PHY_ID 0x01410C30 -#define M88E1011_I_PHY_ID 0x01410C20 -#define IGP01E1000_I_PHY_ID 0x02A80380 -#define M88E1111_I_PHY_ID 0x01410CC0 -#define M88E1543_E_PHY_ID 0x01410EA0 -#define M88E1112_E_PHY_ID 0x01410C90 -#define I347AT4_E_PHY_ID 0x01410DC0 -#define M88E1340M_E_PHY_ID 0x01410DF0 -#define GG82563_E_PHY_ID 0x01410CA0 -#define IGP03E1000_E_PHY_ID 0x02A80390 -#define IFE_E_PHY_ID 0x02A80330 -#define IFE_PLUS_E_PHY_ID 0x02A80320 -#define IFE_C_E_PHY_ID 0x02A80310 -#define I82580_I_PHY_ID 0x015403A0 -#define I350_I_PHY_ID 0x015403B0 -#define I210_I_PHY_ID 0x01410C00 -#define IGP04E1000_E_PHY_ID 0x02A80391 -#define M88_VENDOR 0x0141 - -/* M88E1000 Specific Registers */ -#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */ -#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Reg */ -#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Cntrl */ -#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ - -#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for pg number setting */ -#define M88E1000_PHY_GEN_CONTROL 0x1E /* meaning depends on reg 29 */ - -/* M88E1000 PHY Specific Control Register */ -#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */ -/* MDI Crossover Mode bits 6:5 Manual MDI configuration */ -#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 -#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ -/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ -#define M88E1000_PSCR_AUTO_X_1000T 0x0040 -/* Auto crossover enabled all speeds */ -#define M88E1000_PSCR_AUTO_X_MODE 0x0060 -#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */ - -/* M88E1000 PHY Specific Status Register */ -#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ -#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ -#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ -/* 0 = <50M - * 1 = 50-80M - * 2 = 80-110M - * 3 = 110-140M - * 4 = >140M - */ -#define M88E1000_PSSR_CABLE_LENGTH 0x0380 -#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ -#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ -#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ -#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ - -#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 - -/* Number of times we will attempt to autonegotiate before downshifting if we - * are the master - */ -#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 -#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 -/* Number of times we will attempt to autonegotiate before downshifting if we - * are the slave - */ -#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 -#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 -#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ - -/* Intel I347AT4 Registers */ -#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */ -#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */ -#define I347AT4_PAGE_SELECT 0x16 - -/* I347AT4 Extended PHY Specific Control Register */ - -/* Number of times we will attempt to autonegotiate before downshifting if we - * are the master - */ -#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 -#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000 -#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000 -#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000 -#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000 -#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000 -#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000 -#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000 -#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000 -#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000 - -/* I347AT4 PHY Cable Diagnostics Control */ -#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */ - -/* M88E1112 only registers */ -#define M88E1112_VCT_DSP_DISTANCE 0x001A - -/* M88EC018 Rev 2 specific DownShift settings */ -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 - -/* Bits... - * 15-5: page - * 4-0: register offset - */ -#define GG82563_PAGE_SHIFT 5 -#define GG82563_REG(page, reg) \ - (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) -#define GG82563_MIN_ALT_REG 30 - -/* GG82563 Specific Registers */ -#define GG82563_PHY_SPEC_CTRL GG82563_REG(0, 16) /* PHY Spec Cntrl */ -#define GG82563_PHY_PAGE_SELECT GG82563_REG(0, 22) /* Page Select */ -#define GG82563_PHY_SPEC_CTRL_2 GG82563_REG(0, 26) /* PHY Spec Cntrl2 */ -#define GG82563_PHY_PAGE_SELECT_ALT GG82563_REG(0, 29) /* Alt Page Select */ - -/* MAC Specific Control Register */ -#define GG82563_PHY_MAC_SPEC_CTRL GG82563_REG(2, 21) - -#define GG82563_PHY_DSP_DISTANCE GG82563_REG(5, 26) /* DSP Distance */ - -/* Page 193 - Port Control Registers */ -/* Kumeran Mode Control */ -#define GG82563_PHY_KMRN_MODE_CTRL GG82563_REG(193, 16) -#define GG82563_PHY_PWR_MGMT_CTRL GG82563_REG(193, 20) /* Pwr Mgt Ctrl */ - -/* Page 194 - KMRN Registers */ -#define GG82563_PHY_INBAND_CTRL GG82563_REG(194, 18) /* Inband Ctrl */ - -/* MDI Control */ -#define E1000_MDIC_REG_MASK 0x001F0000 -#define E1000_MDIC_REG_SHIFT 16 -#define E1000_MDIC_PHY_MASK 0x03E00000 -#define E1000_MDIC_PHY_SHIFT 21 -#define E1000_MDIC_OP_WRITE 0x04000000 -#define E1000_MDIC_OP_READ 0x08000000 -#define E1000_MDIC_READY 0x10000000 -#define E1000_MDIC_ERROR 0x40000000 -#define E1000_MDIC_DEST 0x80000000 - -/* SerDes Control */ -#define E1000_GEN_CTL_READY 0x80000000 -#define E1000_GEN_CTL_ADDRESS_SHIFT 8 -#define E1000_GEN_POLL_TIMEOUT 640 - -/* LinkSec register fields */ -#define E1000_LSECTXCAP_SUM_MASK 0x00FF0000 -#define E1000_LSECTXCAP_SUM_SHIFT 16 -#define E1000_LSECRXCAP_SUM_MASK 0x00FF0000 -#define E1000_LSECRXCAP_SUM_SHIFT 16 - -#define E1000_LSECTXCTRL_EN_MASK 0x00000003 -#define E1000_LSECTXCTRL_DISABLE 0x0 -#define E1000_LSECTXCTRL_AUTH 0x1 -#define E1000_LSECTXCTRL_AUTH_ENCRYPT 0x2 -#define E1000_LSECTXCTRL_AISCI 0x00000020 -#define E1000_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 -#define E1000_LSECTXCTRL_RSV_MASK 0x000000D8 - -#define E1000_LSECRXCTRL_EN_MASK 0x0000000C -#define E1000_LSECRXCTRL_EN_SHIFT 2 -#define E1000_LSECRXCTRL_DISABLE 0x0 -#define E1000_LSECRXCTRL_CHECK 0x1 -#define E1000_LSECRXCTRL_STRICT 0x2 -#define E1000_LSECRXCTRL_DROP 0x3 -#define E1000_LSECRXCTRL_PLSH 0x00000040 -#define E1000_LSECRXCTRL_RP 0x00000080 -#define E1000_LSECRXCTRL_RSV_MASK 0xFFFFFF33 - -/* Tx Rate-Scheduler Config fields */ -#define E1000_RTTBCNRC_RS_ENA 0x80000000 -#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF -#define E1000_RTTBCNRC_RF_INT_SHIFT 14 -#define E1000_RTTBCNRC_RF_INT_MASK \ - (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT) - -/* DMA Coalescing register fields */ -/* DMA Coalescing Watchdog Timer */ -#define E1000_DMACR_DMACWT_MASK 0x00003FFF -/* DMA Coalescing Rx Threshold */ -#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 -#define E1000_DMACR_DMACTHR_SHIFT 16 -/* Lx when no PCIe transactions */ -#define E1000_DMACR_DMAC_LX_MASK 0x30000000 -#define E1000_DMACR_DMAC_LX_SHIFT 28 -#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ -/* DMA Coalescing BMC-to-OS Watchdog Enable */ -#define E1000_DMACR_DC_BMC2OSW_EN 0x00008000 - -/* DMA Coalescing Transmit Threshold */ -#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF - -#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ - -/* Rx Traffic Rate Threshold */ -#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF -/* Rx packet rate in current window */ -#define E1000_DMCRTRH_LRPRCW 0x80000000 - -/* DMA Coal Rx Traffic Current Count */ -#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF - -/* Flow ctrl Rx Threshold High val */ -#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 -#define E1000_FCRTC_RTH_COAL_SHIFT 4 -/* Lx power decision based on DMA coal */ -#define E1000_PCIEMISC_LX_DECISION 0x00000080 - -#define E1000_RXPBS_CFG_TS_EN 0x80000000 /* Timestamp in Rx buffer */ -#define E1000_RXPBS_SIZE_I210_MASK 0x0000003F /* Rx packet buffer size */ -#define E1000_TXPB0S_SIZE_I210_MASK 0x0000003F /* Tx packet buffer 0 size */ - -/* Proxy Filter Control */ -#define E1000_PROXYFC_D0 0x00000001 /* Enable offload in D0 */ -#define E1000_PROXYFC_EX 0x00000004 /* Directed exact proxy */ -#define E1000_PROXYFC_MC 0x00000008 /* Directed MC Proxy */ -#define E1000_PROXYFC_BC 0x00000010 /* Broadcast Proxy Enable */ -#define E1000_PROXYFC_ARP_DIRECTED 0x00000020 /* Directed ARP Proxy Ena */ -#define E1000_PROXYFC_IPV4 0x00000040 /* Directed IPv4 Enable */ -#define E1000_PROXYFC_IPV6 0x00000080 /* Directed IPv6 Enable */ -#define E1000_PROXYFC_NS 0x00000200 /* IPv6 Neighbor Solicitation */ -#define E1000_PROXYFC_ARP 0x00000800 /* ARP Request Proxy Ena */ -/* Proxy Status */ -#define E1000_PROXYS_CLEAR 0xFFFFFFFF /* Clear */ - -/* Firmware Status */ -#define E1000_FWSTS_FWRI 0x80000000 /* FW Reset Indication */ -/* VF Control */ -#define E1000_VTCTRL_RST 0x04000000 /* Reset VF */ - -#define E1000_STATUS_LAN_ID_MASK 0x00000000C /* Mask for Lan ID field */ -/* Lan ID bit field offset in status register */ -#define E1000_STATUS_LAN_ID_OFFSET 2 -#define E1000_VFTA_ENTRIES 128 -#ifndef E1000_UNUSEDARG -#define E1000_UNUSEDARG -#endif /* E1000_UNUSEDARG */ -#endif /* _E1000_DEFINES_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_hw.h b/kernel/linux/kni/ethtool/igb/e1000_hw.h deleted file mode 100644 index ed43ef5a17..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_hw.h +++ /dev/null @@ -1,778 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_HW_H_ -#define _E1000_HW_H_ - -#include "e1000_osdep.h" -#include "e1000_regs.h" -#include "e1000_defines.h" - -struct e1000_hw; - -#define E1000_DEV_ID_82576 0x10C9 -#define E1000_DEV_ID_82576_FIBER 0x10E6 -#define E1000_DEV_ID_82576_SERDES 0x10E7 -#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 -#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 -#define E1000_DEV_ID_82576_NS 0x150A -#define E1000_DEV_ID_82576_NS_SERDES 0x1518 -#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D -#define E1000_DEV_ID_82575EB_COPPER 0x10A7 -#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 -#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 -#define E1000_DEV_ID_82580_COPPER 0x150E -#define E1000_DEV_ID_82580_FIBER 0x150F -#define E1000_DEV_ID_82580_SERDES 0x1510 -#define E1000_DEV_ID_82580_SGMII 0x1511 -#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 -#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 -#define E1000_DEV_ID_I350_COPPER 0x1521 -#define E1000_DEV_ID_I350_FIBER 0x1522 -#define E1000_DEV_ID_I350_SERDES 0x1523 -#define E1000_DEV_ID_I350_SGMII 0x1524 -#define E1000_DEV_ID_I350_DA4 0x1546 -#define E1000_DEV_ID_I210_COPPER 0x1533 -#define E1000_DEV_ID_I210_COPPER_OEM1 0x1534 -#define E1000_DEV_ID_I210_COPPER_IT 0x1535 -#define E1000_DEV_ID_I210_FIBER 0x1536 -#define E1000_DEV_ID_I210_SERDES 0x1537 -#define E1000_DEV_ID_I210_SGMII 0x1538 -#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B -#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C -#define E1000_DEV_ID_I211_COPPER 0x1539 -#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40 -#define E1000_DEV_ID_I354_SGMII 0x1F41 -#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45 -#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 -#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A -#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C -#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 - -#define E1000_REVISION_0 0 -#define E1000_REVISION_1 1 -#define E1000_REVISION_2 2 -#define E1000_REVISION_3 3 -#define E1000_REVISION_4 4 - -#define E1000_FUNC_0 0 -#define E1000_FUNC_1 1 -#define E1000_FUNC_2 2 -#define E1000_FUNC_3 3 - -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9 - -enum e1000_mac_type { - e1000_undefined = 0, - e1000_82575, - e1000_82576, - e1000_82580, - e1000_i350, - e1000_i354, - e1000_i210, - e1000_i211, - e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ -}; - -enum e1000_media_type { - e1000_media_type_unknown = 0, - e1000_media_type_copper = 1, - e1000_media_type_fiber = 2, - e1000_media_type_internal_serdes = 3, - e1000_num_media_types -}; - -enum e1000_nvm_type { - e1000_nvm_unknown = 0, - e1000_nvm_none, - e1000_nvm_eeprom_spi, - e1000_nvm_flash_hw, - e1000_nvm_invm, - e1000_nvm_flash_sw -}; - -enum e1000_nvm_override { - e1000_nvm_override_none = 0, - e1000_nvm_override_spi_small, - e1000_nvm_override_spi_large, -}; - -enum e1000_phy_type { - e1000_phy_unknown = 0, - e1000_phy_none, - e1000_phy_m88, - e1000_phy_igp, - e1000_phy_igp_2, - e1000_phy_gg82563, - e1000_phy_igp_3, - e1000_phy_ife, - e1000_phy_82580, - e1000_phy_vf, - e1000_phy_i210, -}; - -enum e1000_bus_type { - e1000_bus_type_unknown = 0, - e1000_bus_type_pci, - e1000_bus_type_pcix, - e1000_bus_type_pci_express, - e1000_bus_type_reserved -}; - -enum e1000_bus_speed { - e1000_bus_speed_unknown = 0, - e1000_bus_speed_33, - e1000_bus_speed_66, - e1000_bus_speed_100, - e1000_bus_speed_120, - e1000_bus_speed_133, - e1000_bus_speed_2500, - e1000_bus_speed_5000, - e1000_bus_speed_reserved -}; - -enum e1000_bus_width { - e1000_bus_width_unknown = 0, - e1000_bus_width_pcie_x1, - e1000_bus_width_pcie_x2, - e1000_bus_width_pcie_x4 = 4, - e1000_bus_width_pcie_x8 = 8, - e1000_bus_width_32, - e1000_bus_width_64, - e1000_bus_width_reserved -}; - -enum e1000_1000t_rx_status { - e1000_1000t_rx_status_not_ok = 0, - e1000_1000t_rx_status_ok, - e1000_1000t_rx_status_undefined = 0xFF -}; - -enum e1000_rev_polarity { - e1000_rev_polarity_normal = 0, - e1000_rev_polarity_reversed, - e1000_rev_polarity_undefined = 0xFF -}; - -enum e1000_fc_mode { - e1000_fc_none = 0, - e1000_fc_rx_pause, - e1000_fc_tx_pause, - e1000_fc_full, - e1000_fc_default = 0xFF -}; - -enum e1000_ms_type { - e1000_ms_hw_default = 0, - e1000_ms_force_master, - e1000_ms_force_slave, - e1000_ms_auto -}; - -enum e1000_smart_speed { - e1000_smart_speed_default = 0, - e1000_smart_speed_on, - e1000_smart_speed_off -}; - -enum e1000_serdes_link_state { - e1000_serdes_link_down = 0, - e1000_serdes_link_autoneg_progress, - e1000_serdes_link_autoneg_complete, - e1000_serdes_link_forced_up -}; - -#ifndef __le16 -#define __le16 u16 -#endif -#ifndef __le32 -#define __le32 u32 -#endif -#ifndef __le64 -#define __le64 u64 -#endif -/* Receive Descriptor */ -struct e1000_rx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 length; /* Length of data DMAed into data buffer */ - __le16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ - __le16 special; -}; - -/* Receive Descriptor - Extended */ -union e1000_rx_desc_extended { - struct { - __le64 buffer_addr; - __le64 reserved; - } read; - struct { - struct { - __le32 mrq; /* Multiple Rx Queues */ - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length; - __le16 vlan; /* VLAN tag */ - } upper; - } wb; /* writeback */ -}; - -#define MAX_PS_BUFFERS 4 - -/* Number of packet split data buffers (not including the header buffer) */ -#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) - -/* Receive Descriptor - Packet Split */ -union e1000_rx_desc_packet_split { - struct { - /* one buffer for protocol header(s), three data buffers */ - __le64 buffer_addr[MAX_PS_BUFFERS]; - } read; - struct { - struct { - __le32 mrq; /* Multiple Rx Queues */ - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length0; /* length of buffer 0 */ - __le16 vlan; /* VLAN tag */ - } middle; - struct { - __le16 header_status; - /* length of buffers 1-3 */ - __le16 length[PS_PAGE_BUFFERS]; - } upper; - __le64 reserved; - } wb; /* writeback */ -}; - -/* Transmit Descriptor */ -struct e1000_tx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - union { - __le32 data; - struct { - __le16 length; /* Data buffer length */ - u8 cso; /* Checksum offset */ - u8 cmd; /* Descriptor control */ - } flags; - } lower; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 css; /* Checksum start */ - __le16 special; - } fields; - } upper; -}; - -/* Offload Context Descriptor */ -struct e1000_context_desc { - union { - __le32 ip_config; - struct { - u8 ipcss; /* IP checksum start */ - u8 ipcso; /* IP checksum offset */ - __le16 ipcse; /* IP checksum end */ - } ip_fields; - } lower_setup; - union { - __le32 tcp_config; - struct { - u8 tucss; /* TCP checksum start */ - u8 tucso; /* TCP checksum offset */ - __le16 tucse; /* TCP checksum end */ - } tcp_fields; - } upper_setup; - __le32 cmd_and_length; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 hdr_len; /* Header length */ - __le16 mss; /* Maximum segment size */ - } fields; - } tcp_seg_setup; -}; - -/* Offload data descriptor */ -struct e1000_data_desc { - __le64 buffer_addr; /* Address of the descriptor's buffer address */ - union { - __le32 data; - struct { - __le16 length; /* Data buffer length */ - u8 typ_len_ext; - u8 cmd; - } flags; - } lower; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 popts; /* Packet Options */ - __le16 special; - } fields; - } upper; -}; - -/* Statistics counters collected by the MAC */ -struct e1000_hw_stats { - u64 crcerrs; - u64 algnerrc; - u64 symerrs; - u64 rxerrc; - u64 mpc; - u64 scc; - u64 ecol; - u64 mcc; - u64 latecol; - u64 colc; - u64 dc; - u64 tncrs; - u64 sec; - u64 cexterr; - u64 rlec; - u64 xonrxc; - u64 xontxc; - u64 xoffrxc; - u64 xofftxc; - u64 fcruc; - u64 prc64; - u64 prc127; - u64 prc255; - u64 prc511; - u64 prc1023; - u64 prc1522; - u64 gprc; - u64 bprc; - u64 mprc; - u64 gptc; - u64 gorc; - u64 gotc; - u64 rnbc; - u64 ruc; - u64 rfc; - u64 roc; - u64 rjc; - u64 mgprc; - u64 mgpdc; - u64 mgptc; - u64 tor; - u64 tot; - u64 tpr; - u64 tpt; - u64 ptc64; - u64 ptc127; - u64 ptc255; - u64 ptc511; - u64 ptc1023; - u64 ptc1522; - u64 mptc; - u64 bptc; - u64 tsctc; - u64 tsctfc; - u64 iac; - u64 icrxptc; - u64 icrxatc; - u64 ictxptc; - u64 ictxatc; - u64 ictxqec; - u64 ictxqmtc; - u64 icrxdmtc; - u64 icrxoc; - u64 cbtmpc; - u64 htdpmc; - u64 cbrdpc; - u64 cbrmpc; - u64 rpthc; - u64 hgptc; - u64 htcbdpc; - u64 hgorc; - u64 hgotc; - u64 lenerrs; - u64 scvpc; - u64 hrmpc; - u64 doosync; - u64 o2bgptc; - u64 o2bspc; - u64 b2ospc; - u64 b2ogprc; -}; - - -struct e1000_phy_stats { - u32 idle_errors; - u32 receive_errors; -}; - -struct e1000_host_mng_dhcp_cookie { - u32 signature; - u8 status; - u8 reserved0; - u16 vlan_id; - u32 reserved1; - u16 reserved2; - u8 reserved3; - u8 checksum; -}; - -/* Host Interface "Rev 1" */ -struct e1000_host_command_header { - u8 command_id; - u8 command_length; - u8 command_options; - u8 checksum; -}; - -#define E1000_HI_MAX_DATA_LENGTH 252 -struct e1000_host_command_info { - struct e1000_host_command_header command_header; - u8 command_data[E1000_HI_MAX_DATA_LENGTH]; -}; - -/* Host Interface "Rev 2" */ -struct e1000_host_mng_command_header { - u8 command_id; - u8 checksum; - u16 reserved1; - u16 reserved2; - u16 command_length; -}; - -#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 -struct e1000_host_mng_command_info { - struct e1000_host_mng_command_header command_header; - u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; -}; - -#include "e1000_mac.h" -#include "e1000_phy.h" -#include "e1000_nvm.h" -#include "e1000_manage.h" -#include "e1000_mbx.h" - -/* Function pointers for the MAC. */ -struct e1000_mac_operations { - s32 (*init_params)(struct e1000_hw *); - s32 (*id_led_init)(struct e1000_hw *); - s32 (*blink_led)(struct e1000_hw *); - bool (*check_mng_mode)(struct e1000_hw *); - s32 (*check_for_link)(struct e1000_hw *); - s32 (*cleanup_led)(struct e1000_hw *); - void (*clear_hw_cntrs)(struct e1000_hw *); - void (*clear_vfta)(struct e1000_hw *); - s32 (*get_bus_info)(struct e1000_hw *); - void (*set_lan_id)(struct e1000_hw *); - s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *); - s32 (*led_on)(struct e1000_hw *); - s32 (*led_off)(struct e1000_hw *); - void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32); - s32 (*reset_hw)(struct e1000_hw *); - s32 (*init_hw)(struct e1000_hw *); - void (*shutdown_serdes)(struct e1000_hw *); - void (*power_up_serdes)(struct e1000_hw *); - s32 (*setup_link)(struct e1000_hw *); - s32 (*setup_physical_interface)(struct e1000_hw *); - s32 (*setup_led)(struct e1000_hw *); - void (*write_vfta)(struct e1000_hw *, u32, u32); - void (*config_collision_dist)(struct e1000_hw *); - void (*rar_set)(struct e1000_hw *, u8*, u32); - s32 (*read_mac_addr)(struct e1000_hw *); - s32 (*validate_mdi_setting)(struct e1000_hw *); - s32 (*get_thermal_sensor_data)(struct e1000_hw *); - s32 (*init_thermal_sensor_thresh)(struct e1000_hw *); - s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); - void (*release_swfw_sync)(struct e1000_hw *, u16); -}; - -/* When to use various PHY register access functions: - * - * Func Caller - * Function Does Does When to use - * ~~~~~~~~~~~~ ~~~~~ ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * X_reg L,P,A n/a for simple PHY reg accesses - * X_reg_locked P,A L for multiple accesses of different regs - * on different pages - * X_reg_page A L,P for multiple accesses of different regs - * on the same page - * - * Where X=[read|write], L=locking, P=sets page, A=register access - * - */ -struct e1000_phy_operations { - s32 (*init_params)(struct e1000_hw *); - s32 (*acquire)(struct e1000_hw *); - s32 (*check_polarity)(struct e1000_hw *); - s32 (*check_reset_block)(struct e1000_hw *); - s32 (*commit)(struct e1000_hw *); - s32 (*force_speed_duplex)(struct e1000_hw *); - s32 (*get_cfg_done)(struct e1000_hw *hw); - s32 (*get_cable_length)(struct e1000_hw *); - s32 (*get_info)(struct e1000_hw *); - s32 (*set_page)(struct e1000_hw *, u16); - s32 (*read_reg)(struct e1000_hw *, u32, u16 *); - s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *); - s32 (*read_reg_page)(struct e1000_hw *, u32, u16 *); - void (*release)(struct e1000_hw *); - s32 (*reset)(struct e1000_hw *); - s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); - s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); - s32 (*write_reg)(struct e1000_hw *, u32, u16); - s32 (*write_reg_locked)(struct e1000_hw *, u32, u16); - s32 (*write_reg_page)(struct e1000_hw *, u32, u16); - void (*power_up)(struct e1000_hw *); - void (*power_down)(struct e1000_hw *); - s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *); - s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8); -}; - -/* Function pointers for the NVM. */ -struct e1000_nvm_operations { - s32 (*init_params)(struct e1000_hw *); - s32 (*acquire)(struct e1000_hw *); - s32 (*read)(struct e1000_hw *, u16, u16, u16 *); - void (*release)(struct e1000_hw *); - void (*reload)(struct e1000_hw *); - s32 (*update)(struct e1000_hw *); - s32 (*valid_led_default)(struct e1000_hw *, u16 *); - s32 (*validate)(struct e1000_hw *); - s32 (*write)(struct e1000_hw *, u16, u16, u16 *); -}; - -#define E1000_MAX_SENSORS 3 - -struct e1000_thermal_diode_data { - u8 location; - u8 temp; - u8 caution_thresh; - u8 max_op_thresh; -}; - -struct e1000_thermal_sensor_data { - struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS]; -}; - -struct e1000_mac_info { - struct e1000_mac_operations ops; - u8 addr[ETH_ADDR_LEN]; - u8 perm_addr[ETH_ADDR_LEN]; - - enum e1000_mac_type type; - - u32 collision_delta; - u32 ledctl_default; - u32 ledctl_mode1; - u32 ledctl_mode2; - u32 mc_filter_type; - u32 tx_packet_delta; - u32 txcw; - - u16 current_ifs_val; - u16 ifs_max_val; - u16 ifs_min_val; - u16 ifs_ratio; - u16 ifs_step_size; - u16 mta_reg_count; - u16 uta_reg_count; - - /* Maximum size of the MTA register table in all supported adapters */ - #define MAX_MTA_REG 128 - u32 mta_shadow[MAX_MTA_REG]; - u16 rar_entry_count; - - u8 forced_speed_duplex; - - bool adaptive_ifs; - bool has_fwsm; - bool arc_subsystem_valid; - bool asf_firmware_present; - bool autoneg; - bool autoneg_failed; - bool get_link_status; - bool in_ifs_mode; - enum e1000_serdes_link_state serdes_link_state; - bool serdes_has_link; - bool tx_pkt_filtering; - struct e1000_thermal_sensor_data thermal_sensor_data; -}; - -struct e1000_phy_info { - struct e1000_phy_operations ops; - enum e1000_phy_type type; - - enum e1000_1000t_rx_status local_rx; - enum e1000_1000t_rx_status remote_rx; - enum e1000_ms_type ms_type; - enum e1000_ms_type original_ms_type; - enum e1000_rev_polarity cable_polarity; - enum e1000_smart_speed smart_speed; - - u32 addr; - u32 id; - u32 reset_delay_us; /* in usec */ - u32 revision; - - enum e1000_media_type media_type; - - u16 autoneg_advertised; - u16 autoneg_mask; - u16 cable_length; - u16 max_cable_length; - u16 min_cable_length; - - u8 mdix; - - bool disable_polarity_correction; - bool is_mdix; - bool polarity_correction; - bool reset_disable; - bool speed_downgraded; - bool autoneg_wait_to_complete; -}; - -struct e1000_nvm_info { - struct e1000_nvm_operations ops; - enum e1000_nvm_type type; - enum e1000_nvm_override override; - - u32 flash_bank_size; - u32 flash_base_addr; - - u16 word_size; - u16 delay_usec; - u16 address_bits; - u16 opcode_bits; - u16 page_size; -}; - -struct e1000_bus_info { - enum e1000_bus_type type; - enum e1000_bus_speed speed; - enum e1000_bus_width width; - - u16 func; - u16 pci_cmd_word; -}; - -struct e1000_fc_info { - u32 high_water; /* Flow control high-water mark */ - u32 low_water; /* Flow control low-water mark */ - u16 pause_time; /* Flow control pause timer */ - u16 refresh_time; /* Flow control refresh timer */ - bool send_xon; /* Flow control send XON */ - bool strict_ieee; /* Strict IEEE mode */ - enum e1000_fc_mode current_mode; /* FC mode in effect */ - enum e1000_fc_mode requested_mode; /* FC mode requested by caller */ -}; - -struct e1000_mbx_operations { - s32 (*init_params)(struct e1000_hw *hw); - s32 (*read)(struct e1000_hw *, u32 *, u16, u16); - s32 (*write)(struct e1000_hw *, u32 *, u16, u16); - s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16); - s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16); - s32 (*check_for_msg)(struct e1000_hw *, u16); - s32 (*check_for_ack)(struct e1000_hw *, u16); - s32 (*check_for_rst)(struct e1000_hw *, u16); -}; - -struct e1000_mbx_stats { - u32 msgs_tx; - u32 msgs_rx; - - u32 acks; - u32 reqs; - u32 rsts; -}; - -struct e1000_mbx_info { - struct e1000_mbx_operations ops; - struct e1000_mbx_stats stats; - u32 timeout; - u32 usec_delay; - u16 size; -}; - -struct e1000_dev_spec_82575 { - bool sgmii_active; - bool global_device_reset; - bool eee_disable; - bool module_plugged; - bool clear_semaphore_once; - u32 mtu; - struct sfp_e1000_flags eth_flags; - u8 media_port; - bool media_changed; -}; - -struct e1000_dev_spec_vf { - u32 vf_number; - u32 v2p_mailbox; -}; - -struct e1000_hw { - void *back; - - u8 __iomem *hw_addr; - u8 __iomem *flash_address; - unsigned long io_base; - - struct e1000_mac_info mac; - struct e1000_fc_info fc; - struct e1000_phy_info phy; - struct e1000_nvm_info nvm; - struct e1000_bus_info bus; - struct e1000_mbx_info mbx; - struct e1000_host_mng_dhcp_cookie mng_cookie; - - union { - struct e1000_dev_spec_82575 _82575; - struct e1000_dev_spec_vf vf; - } dev_spec; - - u16 device_id; - u16 subsystem_vendor_id; - u16 subsystem_device_id; - u16 vendor_id; - - u8 revision_id; -}; - -#include "e1000_82575.h" -#include "e1000_i210.h" - -/* These functions must be implemented by drivers */ -s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); -s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); - -#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.c b/kernel/linux/kni/ethtool/igb/e1000_i210.c deleted file mode 100644 index a4fabc3aa1..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_i210.c +++ /dev/null @@ -1,894 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000_api.h" - - -static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw); -static void e1000_release_nvm_i210(struct e1000_hw *hw); -static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw); -static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw); -static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data); - -/** - * e1000_acquire_nvm_i210 - Request for access to EEPROM - * @hw: pointer to the HW structure - * - * Acquire the necessary semaphores for exclusive access to the EEPROM. - * Set the EEPROM access request bit and wait for EEPROM access grant bit. - * Return successful if access grant bit set, else clear the request for - * EEPROM access and return -E1000_ERR_NVM (-1). - **/ -static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw) -{ - s32 ret_val; - - DEBUGFUNC("e1000_acquire_nvm_i210"); - - ret_val = e1000_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); - - return ret_val; -} - -/** - * e1000_release_nvm_i210 - Release exclusive access to EEPROM - * @hw: pointer to the HW structure - * - * Stop any current commands to the EEPROM and clear the EEPROM request bit, - * then release the semaphores acquired. - **/ -static void e1000_release_nvm_i210(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_release_nvm_i210"); - - e1000_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); -} - -/** - * e1000_acquire_swfw_sync_i210 - Acquire SW/FW semaphore - * @hw: pointer to the HW structure - * @mask: specifies which semaphore to acquire - * - * Acquire the SW/FW semaphore to access the PHY or NVM. The mask - * will also specify which port we're acquiring the lock for. - **/ -s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync; - u32 swmask = mask; - u32 fwmask = mask << 16; - s32 ret_val = E1000_SUCCESS; - s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ - - DEBUGFUNC("e1000_acquire_swfw_sync_i210"); - - while (i < timeout) { - if (e1000_get_hw_semaphore_i210(hw)) { - ret_val = -E1000_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - if (!(swfw_sync & (fwmask | swmask))) - break; - - /* - * Firmware currently using resource (fwmask) - * or other software thread using resource (swmask) - */ - e1000_put_hw_semaphore_generic(hw); - msec_delay_irq(5); - i++; - } - - if (i == timeout) { - DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); - ret_val = -E1000_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync |= swmask; - E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); - - e1000_put_hw_semaphore_generic(hw); - -out: - return ret_val; -} - -/** - * e1000_release_swfw_sync_i210 - Release SW/FW semaphore - * @hw: pointer to the HW structure - * @mask: specifies which semaphore to acquire - * - * Release the SW/FW semaphore used to access the PHY or NVM. The mask - * will also specify which port we're releasing the lock for. - **/ -void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync; - - DEBUGFUNC("e1000_release_swfw_sync_i210"); - - while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS) - ; /* Empty */ - - swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - swfw_sync &= ~mask; - E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); - - e1000_put_hw_semaphore_generic(hw); -} - -/** - * e1000_get_hw_semaphore_i210 - Acquire hardware semaphore - * @hw: pointer to the HW structure - * - * Acquire the HW semaphore to access the PHY or NVM - **/ -static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw) -{ - u32 swsm; - s32 timeout = hw->nvm.word_size + 1; - s32 i = 0; - - DEBUGFUNC("e1000_get_hw_semaphore_i210"); - - /* Get the SW semaphore */ - while (i < timeout) { - swsm = E1000_READ_REG(hw, E1000_SWSM); - if (!(swsm & E1000_SWSM_SMBI)) - break; - - usec_delay(50); - i++; - } - - if (i == timeout) { - /* In rare circumstances, the SW semaphore may already be held - * unintentionally. Clear the semaphore once before giving up. - */ - if (hw->dev_spec._82575.clear_semaphore_once) { - hw->dev_spec._82575.clear_semaphore_once = false; - e1000_put_hw_semaphore_generic(hw); - for (i = 0; i < timeout; i++) { - swsm = E1000_READ_REG(hw, E1000_SWSM); - if (!(swsm & E1000_SWSM_SMBI)) - break; - - usec_delay(50); - } - } - - /* If we do not have the semaphore here, we have to give up. */ - if (i == timeout) { - DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); - return -E1000_ERR_NVM; - } - } - - /* Get the FW semaphore. */ - for (i = 0; i < timeout; i++) { - swsm = E1000_READ_REG(hw, E1000_SWSM); - E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); - - /* Semaphore acquired if bit latched */ - if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) - break; - - usec_delay(50); - } - - if (i == timeout) { - /* Release semaphores */ - e1000_put_hw_semaphore_generic(hw); - DEBUGOUT("Driver can't access the NVM\n"); - return -E1000_ERR_NVM; - } - - return E1000_SUCCESS; -} - -/** - * e1000_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register - * @hw: pointer to the HW structure - * @offset: offset of word in the Shadow Ram to read - * @words: number of words to read - * @data: word read from the Shadow Ram - * - * Reads a 16 bit word from the Shadow Ram using the EERD register. - * Uses necessary synchronization semaphores. - **/ -s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - s32 status = E1000_SUCCESS; - u16 i, count; - - DEBUGFUNC("e1000_read_nvm_srrd_i210"); - - /* We cannot hold synchronization semaphores for too long, - * because of forceful takeover procedure. However it is more efficient - * to read in bursts than synchronizing access for each word. */ - for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { - count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? - E1000_EERD_EEWR_MAX_COUNT : (words - i); - if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { - status = e1000_read_nvm_eerd(hw, offset, count, - data + i); - hw->nvm.ops.release(hw); - } else { - status = E1000_ERR_SWFW_SYNC; - } - - if (status != E1000_SUCCESS) - break; - } - - return status; -} - -/** - * e1000_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR - * @hw: pointer to the HW structure - * @offset: offset within the Shadow RAM to be written to - * @words: number of words to write - * @data: 16 bit word(s) to be written to the Shadow RAM - * - * Writes data to Shadow RAM at offset using EEWR register. - * - * If e1000_update_nvm_checksum is not called after this function , the - * data will not be committed to FLASH and also Shadow RAM will most likely - * contain an invalid checksum. - * - * If error code is returned, data and Shadow RAM may be inconsistent - buffer - * partially written. - **/ -s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - s32 status = E1000_SUCCESS; - u16 i, count; - - DEBUGFUNC("e1000_write_nvm_srwr_i210"); - - /* We cannot hold synchronization semaphores for too long, - * because of forceful takeover procedure. However it is more efficient - * to write in bursts than synchronizing access for each word. */ - for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { - count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? - E1000_EERD_EEWR_MAX_COUNT : (words - i); - if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { - status = e1000_write_nvm_srwr(hw, offset, count, - data + i); - hw->nvm.ops.release(hw); - } else { - status = E1000_ERR_SWFW_SYNC; - } - - if (status != E1000_SUCCESS) - break; - } - - return status; -} - -/** - * e1000_write_nvm_srwr - Write to Shadow Ram using EEWR - * @hw: pointer to the HW structure - * @offset: offset within the Shadow Ram to be written to - * @words: number of words to write - * @data: 16 bit word(s) to be written to the Shadow Ram - * - * Writes data to Shadow Ram at offset using EEWR register. - * - * If e1000_update_nvm_checksum is not called after this function , the - * Shadow Ram will most likely contain an invalid checksum. - **/ -static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 i, k, eewr = 0; - u32 attempts = 100000; - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_write_nvm_srwr"); - - /* - * A check for invalid values: offset too large, too many words, - * too many words for the offset, and not enough words. - */ - if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || - (words == 0)) { - DEBUGOUT("nvm parameter(s) out of bounds\n"); - ret_val = -E1000_ERR_NVM; - goto out; - } - - for (i = 0; i < words; i++) { - eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) | - (data[i] << E1000_NVM_RW_REG_DATA) | - E1000_NVM_RW_REG_START; - - E1000_WRITE_REG(hw, E1000_SRWR, eewr); - - for (k = 0; k < attempts; k++) { - if (E1000_NVM_RW_REG_DONE & - E1000_READ_REG(hw, E1000_SRWR)) { - ret_val = E1000_SUCCESS; - break; - } - usec_delay(5); - } - - if (ret_val != E1000_SUCCESS) { - DEBUGOUT("Shadow RAM write EEWR timed out\n"); - break; - } - } - -out: - return ret_val; -} - -/** e1000_read_invm_word_i210 - Reads OTP - * @hw: pointer to the HW structure - * @address: the word address (aka eeprom offset) to read - * @data: pointer to the data read - * - * Reads 16-bit words from the OTP. Return error when the word is not - * stored in OTP. - **/ -static s32 e1000_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data) -{ - s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; - u32 invm_dword; - u16 i; - u8 record_type, word_address; - - DEBUGFUNC("e1000_read_invm_word_i210"); - - for (i = 0; i < E1000_INVM_SIZE; i++) { - invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); - /* Get record type */ - record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword); - if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE) - break; - if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE) - i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS; - if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE) - i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS; - if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) { - word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword); - if (word_address == address) { - *data = INVM_DWORD_TO_WORD_DATA(invm_dword); - DEBUGOUT2("Read INVM Word 0x%02x = %x", - address, *data); - status = E1000_SUCCESS; - break; - } - } - } - if (status != E1000_SUCCESS) - DEBUGOUT1("Requested word 0x%02x not found in OTP\n", address); - return status; -} - -/** e1000_read_invm_i210 - Read invm wrapper function for I210/I211 - * @hw: pointer to the HW structure - * @address: the word address (aka eeprom offset) to read - * @data: pointer to the data read - * - * Wrapper function to return data formerly found in the NVM. - **/ -static s32 e1000_read_invm_i210(struct e1000_hw *hw, u16 offset, - u16 E1000_UNUSEDARG words, u16 *data) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_read_invm_i210"); - - /* Only the MAC addr is required to be present in the iNVM */ - switch (offset) { - case NVM_MAC_ADDR: - ret_val = e1000_read_invm_word_i210(hw, (u8)offset, &data[0]); - ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+1, - &data[1]); - ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+2, - &data[2]); - if (ret_val != E1000_SUCCESS) - DEBUGOUT("MAC Addr not found in iNVM\n"); - break; - case NVM_INIT_CTRL_2: - ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); - if (ret_val != E1000_SUCCESS) { - *data = NVM_INIT_CTRL_2_DEFAULT_I211; - ret_val = E1000_SUCCESS; - } - break; - case NVM_INIT_CTRL_4: - ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); - if (ret_val != E1000_SUCCESS) { - *data = NVM_INIT_CTRL_4_DEFAULT_I211; - ret_val = E1000_SUCCESS; - } - break; - case NVM_LED_1_CFG: - ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); - if (ret_val != E1000_SUCCESS) { - *data = NVM_LED_1_CFG_DEFAULT_I211; - ret_val = E1000_SUCCESS; - } - break; - case NVM_LED_0_2_CFG: - ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); - if (ret_val != E1000_SUCCESS) { - *data = NVM_LED_0_2_CFG_DEFAULT_I211; - ret_val = E1000_SUCCESS; - } - break; - case NVM_ID_LED_SETTINGS: - ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); - if (ret_val != E1000_SUCCESS) { - *data = ID_LED_RESERVED_FFFF; - ret_val = E1000_SUCCESS; - } - break; - case NVM_SUB_DEV_ID: - *data = hw->subsystem_device_id; - break; - case NVM_SUB_VEN_ID: - *data = hw->subsystem_vendor_id; - break; - case NVM_DEV_ID: - *data = hw->device_id; - break; - case NVM_VEN_ID: - *data = hw->vendor_id; - break; - default: - DEBUGOUT1("NVM word 0x%02x is not mapped.\n", offset); - *data = NVM_RESERVED_WORD; - break; - } - return ret_val; -} - -/** - * e1000_read_invm_version - Reads iNVM version and image type - * @hw: pointer to the HW structure - * @invm_ver: version structure for the version read - * - * Reads iNVM version and image type. - **/ -s32 e1000_read_invm_version(struct e1000_hw *hw, - struct e1000_fw_version *invm_ver) -{ - u32 *record = NULL; - u32 *next_record = NULL; - u32 i = 0; - u32 invm_dword = 0; - u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE / - E1000_INVM_RECORD_SIZE_IN_BYTES); - u32 buffer[E1000_INVM_SIZE]; - s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; - u16 version = 0; - - DEBUGFUNC("e1000_read_invm_version"); - - /* Read iNVM memory */ - for (i = 0; i < E1000_INVM_SIZE; i++) { - invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); - buffer[i] = invm_dword; - } - - /* Read version number */ - for (i = 1; i < invm_blocks; i++) { - record = &buffer[invm_blocks - i]; - next_record = &buffer[invm_blocks - i + 1]; - - /* Check if we have first version location used */ - if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) { - version = 0; - status = E1000_SUCCESS; - break; - } - /* Check if we have second version location used */ - else if ((i == 1) && - ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) { - version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; - status = E1000_SUCCESS; - break; - } - /* - * Check if we have odd version location - * used and it is the last one used - */ - else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) && - ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) && - (i != 1))) { - version = (*next_record & E1000_INVM_VER_FIELD_TWO) - >> 13; - status = E1000_SUCCESS; - break; - } - /* - * Check if we have even version location - * used and it is the last one used - */ - else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) && - ((*record & 0x3) == 0)) { - version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; - status = E1000_SUCCESS; - break; - } - } - - if (status == E1000_SUCCESS) { - invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK) - >> E1000_INVM_MAJOR_SHIFT; - invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK; - } - /* Read Image Type */ - for (i = 1; i < invm_blocks; i++) { - record = &buffer[invm_blocks - i]; - next_record = &buffer[invm_blocks - i + 1]; - - /* Check if we have image type in first location used */ - if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) { - invm_ver->invm_img_type = 0; - status = E1000_SUCCESS; - break; - } - /* Check if we have image type in first location used */ - else if ((((*record & 0x3) == 0) && - ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) || - ((((*record & 0x3) != 0) && (i != 1)))) { - invm_ver->invm_img_type = - (*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23; - status = E1000_SUCCESS; - break; - } - } - return status; -} - -/** - * e1000_validate_nvm_checksum_i210 - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM checksum by reading/adding each word of the EEPROM - * and then verifies that the sum of the EEPROM is equal to 0xBABA. - **/ -s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw) -{ - s32 status = E1000_SUCCESS; - s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *); - - DEBUGFUNC("e1000_validate_nvm_checksum_i210"); - - if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { - - /* - * Replace the read function with semaphore grabbing with - * the one that skips this for a while. - * We have semaphore taken already here. - */ - read_op_ptr = hw->nvm.ops.read; - hw->nvm.ops.read = e1000_read_nvm_eerd; - - status = e1000_validate_nvm_checksum_generic(hw); - - /* Revert original read operation. */ - hw->nvm.ops.read = read_op_ptr; - - hw->nvm.ops.release(hw); - } else { - status = E1000_ERR_SWFW_SYNC; - } - - return status; -} - - -/** - * e1000_update_nvm_checksum_i210 - Update EEPROM checksum - * @hw: pointer to the HW structure - * - * Updates the EEPROM checksum by reading/adding each word of the EEPROM - * up to the checksum. Then calculates the EEPROM checksum and writes the - * value to the EEPROM. Next commit EEPROM data onto the Flash. - **/ -s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 checksum = 0; - u16 i, nvm_data; - - DEBUGFUNC("e1000_update_nvm_checksum_i210"); - - /* - * Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - ret_val = e1000_read_nvm_eerd(hw, 0, 1, &nvm_data); - if (ret_val != E1000_SUCCESS) { - DEBUGOUT("EEPROM read failed\n"); - goto out; - } - - if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { - /* - * Do not use hw->nvm.ops.write, hw->nvm.ops.read - * because we do not want to take the synchronization - * semaphores twice here. - */ - - for (i = 0; i < NVM_CHECKSUM_REG; i++) { - ret_val = e1000_read_nvm_eerd(hw, i, 1, &nvm_data); - if (ret_val) { - hw->nvm.ops.release(hw); - DEBUGOUT("NVM Read Error while updating checksum.\n"); - goto out; - } - checksum += nvm_data; - } - checksum = (u16) NVM_SUM - checksum; - ret_val = e1000_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1, - &checksum); - if (ret_val != E1000_SUCCESS) { - hw->nvm.ops.release(hw); - DEBUGOUT("NVM Write Error while updating checksum.\n"); - goto out; - } - - hw->nvm.ops.release(hw); - - ret_val = e1000_update_flash_i210(hw); - } else { - ret_val = E1000_ERR_SWFW_SYNC; - } -out: - return ret_val; -} - -/** - * e1000_get_flash_presence_i210 - Check if flash device is detected. - * @hw: pointer to the HW structure - * - **/ -bool e1000_get_flash_presence_i210(struct e1000_hw *hw) -{ - u32 eec = 0; - bool ret_val = false; - - DEBUGFUNC("e1000_get_flash_presence_i210"); - - eec = E1000_READ_REG(hw, E1000_EECD); - - if (eec & E1000_EECD_FLASH_DETECTED_I210) - ret_val = true; - - return ret_val; -} - -/** - * e1000_update_flash_i210 - Commit EEPROM to the flash - * @hw: pointer to the HW structure - * - **/ -s32 e1000_update_flash_i210(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u32 flup; - - DEBUGFUNC("e1000_update_flash_i210"); - - ret_val = e1000_pool_flash_update_done_i210(hw); - if (ret_val == -E1000_ERR_NVM) { - DEBUGOUT("Flash update time out\n"); - goto out; - } - - flup = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD_I210; - E1000_WRITE_REG(hw, E1000_EECD, flup); - - ret_val = e1000_pool_flash_update_done_i210(hw); - if (ret_val == E1000_SUCCESS) - DEBUGOUT("Flash update complete\n"); - else - DEBUGOUT("Flash update time out\n"); - -out: - return ret_val; -} - -/** - * e1000_pool_flash_update_done_i210 - Pool FLUDONE status. - * @hw: pointer to the HW structure - * - **/ -s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw) -{ - s32 ret_val = -E1000_ERR_NVM; - u32 i, reg; - - DEBUGFUNC("e1000_pool_flash_update_done_i210"); - - for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { - reg = E1000_READ_REG(hw, E1000_EECD); - if (reg & E1000_EECD_FLUDONE_I210) { - ret_val = E1000_SUCCESS; - break; - } - usec_delay(5); - } - - return ret_val; -} - -/** - * e1000_init_nvm_params_i210 - Initialize i210 NVM function pointers - * @hw: pointer to the HW structure - * - * Initialize the i210/i211 NVM parameters and function pointers. - **/ -static s32 e1000_init_nvm_params_i210(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - struct e1000_nvm_info *nvm = &hw->nvm; - - DEBUGFUNC("e1000_init_nvm_params_i210"); - - ret_val = e1000_init_nvm_params_82575(hw); - nvm->ops.acquire = e1000_acquire_nvm_i210; - nvm->ops.release = e1000_release_nvm_i210; - nvm->ops.valid_led_default = e1000_valid_led_default_i210; - if (e1000_get_flash_presence_i210(hw)) { - hw->nvm.type = e1000_nvm_flash_hw; - nvm->ops.read = e1000_read_nvm_srrd_i210; - nvm->ops.write = e1000_write_nvm_srwr_i210; - nvm->ops.validate = e1000_validate_nvm_checksum_i210; - nvm->ops.update = e1000_update_nvm_checksum_i210; - } else { - hw->nvm.type = e1000_nvm_invm; - nvm->ops.read = e1000_read_invm_i210; - nvm->ops.write = e1000_null_write_nvm; - nvm->ops.validate = e1000_null_ops_generic; - nvm->ops.update = e1000_null_ops_generic; - } - return ret_val; -} - -/** - * e1000_init_function_pointers_i210 - Init func ptrs. - * @hw: pointer to the HW structure - * - * Called to initialize all function pointers and parameters. - **/ -void e1000_init_function_pointers_i210(struct e1000_hw *hw) -{ - e1000_init_function_pointers_82575(hw); - hw->nvm.ops.init_params = e1000_init_nvm_params_i210; - - return; -} - -/** - * e1000_valid_led_default_i210 - Verify a valid default LED config - * @hw: pointer to the HW structure - * @data: pointer to the NVM (EEPROM) - * - * Read the EEPROM for the current default LED configuration. If the - * LED configuration is not valid, set to a valid LED configuration. - **/ -static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_valid_led_default_i210"); - - ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { - switch (hw->phy.media_type) { - case e1000_media_type_internal_serdes: - *data = ID_LED_DEFAULT_I210_SERDES; - break; - case e1000_media_type_copper: - default: - *data = ID_LED_DEFAULT_I210; - break; - } - } -out: - return ret_val; -} - -/** - * __e1000_access_xmdio_reg - Read/write XMDIO register - * @hw: pointer to the HW structure - * @address: XMDIO address to program - * @dev_addr: device address to program - * @data: pointer to value to read/write from/to the XMDIO address - * @read: boolean flag to indicate read or write - **/ -static s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address, - u8 dev_addr, u16 *data, bool read) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("__e1000_access_xmdio_reg"); - - ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr); - if (ret_val) - return ret_val; - - ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address); - if (ret_val) - return ret_val; - - ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA | - dev_addr); - if (ret_val) - return ret_val; - - if (read) - ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data); - else - ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data); - if (ret_val) - return ret_val; - - /* Recalibrate the device back to 0 */ - ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0); - if (ret_val) - return ret_val; - - return ret_val; -} - -/** - * e1000_read_xmdio_reg - Read XMDIO register - * @hw: pointer to the HW structure - * @addr: XMDIO address to program - * @dev_addr: device address to program - * @data: value to be read from the EMI address - **/ -s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data) -{ - DEBUGFUNC("e1000_read_xmdio_reg"); - - return __e1000_access_xmdio_reg(hw, addr, dev_addr, data, true); -} - -/** - * e1000_write_xmdio_reg - Write XMDIO register - * @hw: pointer to the HW structure - * @addr: XMDIO address to program - * @dev_addr: device address to program - * @data: value to be written to the XMDIO address - **/ -s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data) -{ - DEBUGFUNC("e1000_read_xmdio_reg"); - - return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, false); -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.h b/kernel/linux/kni/ethtool/igb/e1000_i210.h deleted file mode 100644 index 9df7c203c1..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_i210.h +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_I210_H_ -#define _E1000_I210_H_ - -bool e1000_get_flash_presence_i210(struct e1000_hw *hw); -s32 e1000_update_flash_i210(struct e1000_hw *hw); -s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw); -s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw); -s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, - u16 words, u16 *data); -s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, - u16 words, u16 *data); -s32 e1000_read_invm_version(struct e1000_hw *hw, - struct e1000_fw_version *invm_ver); -s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask); -void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask); -s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, - u16 *data); -s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, - u16 data); - -#define E1000_STM_OPCODE 0xDB00 -#define E1000_EEPROM_FLASH_SIZE_WORD 0x11 - -#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \ - (u8)((invm_dword) & 0x7) -#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \ - (u8)(((invm_dword) & 0x0000FE00) >> 9) -#define INVM_DWORD_TO_WORD_DATA(invm_dword) \ - (u16)(((invm_dword) & 0xFFFF0000) >> 16) - -enum E1000_INVM_STRUCTURE_TYPE { - E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00, - E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01, - E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02, - E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03, - E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04, - E1000_INVM_INVALIDATED_STRUCTURE = 0x0F, -}; - -#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8 -#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1 -#define E1000_INVM_ULT_BYTES_SIZE 8 -#define E1000_INVM_RECORD_SIZE_IN_BYTES 4 -#define E1000_INVM_VER_FIELD_ONE 0x1FF8 -#define E1000_INVM_VER_FIELD_TWO 0x7FE000 -#define E1000_INVM_IMGTYPE_FIELD 0x1F800000 - -#define E1000_INVM_MAJOR_MASK 0x3F0 -#define E1000_INVM_MINOR_MASK 0xF -#define E1000_INVM_MAJOR_SHIFT 4 - -#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_OFF1_OFF2)) -#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_OFF1_ON2)) - -/* NVM offset defaults for I211 devices */ -#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243 -#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1 -#define NVM_LED_1_CFG_DEFAULT_I211 0x0184 -#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C -#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.c b/kernel/linux/kni/ethtool/igb/e1000_mac.c deleted file mode 100644 index 13a42267cc..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_mac.c +++ /dev/null @@ -1,2081 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000_api.h" - -static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw); -static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); -static void e1000_config_collision_dist_generic(struct e1000_hw *hw); -static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); - -/** - * e1000_init_mac_ops_generic - Initialize MAC function pointers - * @hw: pointer to the HW structure - * - * Setups up the function pointers to no-op functions - **/ -void e1000_init_mac_ops_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - DEBUGFUNC("e1000_init_mac_ops_generic"); - - /* General Setup */ - mac->ops.init_params = e1000_null_ops_generic; - mac->ops.init_hw = e1000_null_ops_generic; - mac->ops.reset_hw = e1000_null_ops_generic; - mac->ops.setup_physical_interface = e1000_null_ops_generic; - mac->ops.get_bus_info = e1000_null_ops_generic; - mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie; - mac->ops.read_mac_addr = e1000_read_mac_addr_generic; - mac->ops.config_collision_dist = e1000_config_collision_dist_generic; - mac->ops.clear_hw_cntrs = e1000_null_mac_generic; - /* LED */ - mac->ops.cleanup_led = e1000_null_ops_generic; - mac->ops.setup_led = e1000_null_ops_generic; - mac->ops.blink_led = e1000_null_ops_generic; - mac->ops.led_on = e1000_null_ops_generic; - mac->ops.led_off = e1000_null_ops_generic; - /* LINK */ - mac->ops.setup_link = e1000_null_ops_generic; - mac->ops.get_link_up_info = e1000_null_link_info; - mac->ops.check_for_link = e1000_null_ops_generic; - /* Management */ - mac->ops.check_mng_mode = e1000_null_mng_mode; - /* VLAN, MC, etc. */ - mac->ops.update_mc_addr_list = e1000_null_update_mc; - mac->ops.clear_vfta = e1000_null_mac_generic; - mac->ops.write_vfta = e1000_null_write_vfta; - mac->ops.rar_set = e1000_rar_set_generic; - mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic; -} - -/** - * e1000_null_ops_generic - No-op function, returns 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_ops_generic(struct e1000_hw E1000_UNUSEDARG *hw) -{ - DEBUGFUNC("e1000_null_ops_generic"); - return E1000_SUCCESS; -} - -/** - * e1000_null_mac_generic - No-op function, return void - * @hw: pointer to the HW structure - **/ -void e1000_null_mac_generic(struct e1000_hw E1000_UNUSEDARG *hw) -{ - DEBUGFUNC("e1000_null_mac_generic"); - return; -} - -/** - * e1000_null_link_info - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_link_info(struct e1000_hw E1000_UNUSEDARG *hw, - u16 E1000_UNUSEDARG *s, u16 E1000_UNUSEDARG *d) -{ - DEBUGFUNC("e1000_null_link_info"); - return E1000_SUCCESS; -} - -/** - * e1000_null_mng_mode - No-op function, return false - * @hw: pointer to the HW structure - **/ -bool e1000_null_mng_mode(struct e1000_hw E1000_UNUSEDARG *hw) -{ - DEBUGFUNC("e1000_null_mng_mode"); - return false; -} - -/** - * e1000_null_update_mc - No-op function, return void - * @hw: pointer to the HW structure - **/ -void e1000_null_update_mc(struct e1000_hw E1000_UNUSEDARG *hw, - u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) -{ - DEBUGFUNC("e1000_null_update_mc"); - return; -} - -/** - * e1000_null_write_vfta - No-op function, return void - * @hw: pointer to the HW structure - **/ -void e1000_null_write_vfta(struct e1000_hw E1000_UNUSEDARG *hw, - u32 E1000_UNUSEDARG a, u32 E1000_UNUSEDARG b) -{ - DEBUGFUNC("e1000_null_write_vfta"); - return; -} - -/** - * e1000_null_rar_set - No-op function, return void - * @hw: pointer to the HW structure - **/ -void e1000_null_rar_set(struct e1000_hw E1000_UNUSEDARG *hw, - u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) -{ - DEBUGFUNC("e1000_null_rar_set"); - return; -} - -/** - * e1000_get_bus_info_pcie_generic - Get PCIe bus information - * @hw: pointer to the HW structure - * - * Determines and stores the system bus information for a particular - * network interface. The following bus information is determined and stored: - * bus speed, bus width, type (PCIe), and PCIe function. - **/ -s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - struct e1000_bus_info *bus = &hw->bus; - s32 ret_val; - u16 pcie_link_status; - - DEBUGFUNC("e1000_get_bus_info_pcie_generic"); - - bus->type = e1000_bus_type_pci_express; - - ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS, - &pcie_link_status); - if (ret_val) { - bus->width = e1000_bus_width_unknown; - bus->speed = e1000_bus_speed_unknown; - } else { - switch (pcie_link_status & PCIE_LINK_SPEED_MASK) { - case PCIE_LINK_SPEED_2500: - bus->speed = e1000_bus_speed_2500; - break; - case PCIE_LINK_SPEED_5000: - bus->speed = e1000_bus_speed_5000; - break; - default: - bus->speed = e1000_bus_speed_unknown; - break; - } - - bus->width = (enum e1000_bus_width)((pcie_link_status & - PCIE_LINK_WIDTH_MASK) >> PCIE_LINK_WIDTH_SHIFT); - } - - mac->ops.set_lan_id(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices - * - * @hw: pointer to the HW structure - * - * Determines the LAN function id by reading memory-mapped registers - * and swaps the port value if requested. - **/ -static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw) -{ - struct e1000_bus_info *bus = &hw->bus; - u32 reg; - - /* The status register reports the correct function number - * for the device regardless of function swap state. - */ - reg = E1000_READ_REG(hw, E1000_STATUS); - bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT; -} - -/** - * e1000_set_lan_id_single_port - Set LAN id for a single port device - * @hw: pointer to the HW structure - * - * Sets the LAN function id to zero for a single port device. - **/ -void e1000_set_lan_id_single_port(struct e1000_hw *hw) -{ - struct e1000_bus_info *bus = &hw->bus; - - bus->func = 0; -} - -/** - * e1000_clear_vfta_generic - Clear VLAN filter table - * @hw: pointer to the HW structure - * - * Clears the register array which contains the VLAN filter table by - * setting all the values to 0. - **/ -void e1000_clear_vfta_generic(struct e1000_hw *hw) -{ - u32 offset; - - DEBUGFUNC("e1000_clear_vfta_generic"); - - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); - E1000_WRITE_FLUSH(hw); - } -} - -/** - * e1000_write_vfta_generic - Write value to VLAN filter table - * @hw: pointer to the HW structure - * @offset: register offset in VLAN filter table - * @value: register value written to VLAN filter table - * - * Writes value at the given offset in the register array which stores - * the VLAN filter table. - **/ -void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) -{ - DEBUGFUNC("e1000_write_vfta_generic"); - - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); - E1000_WRITE_FLUSH(hw); -} - -/** - * e1000_init_rx_addrs_generic - Initialize receive address's - * @hw: pointer to the HW structure - * @rar_count: receive address registers - * - * Setup the receive address registers by setting the base receive address - * register to the devices MAC address and clearing all the other receive - * address registers to 0. - **/ -void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count) -{ - u32 i; - u8 mac_addr[ETH_ADDR_LEN] = {0}; - - DEBUGFUNC("e1000_init_rx_addrs_generic"); - - /* Setup the receive address */ - DEBUGOUT("Programming MAC Address into RAR[0]\n"); - - hw->mac.ops.rar_set(hw, hw->mac.addr, 0); - - /* Zero out the other (rar_entry_count - 1) receive addresses */ - DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1); - for (i = 1; i < rar_count; i++) - hw->mac.ops.rar_set(hw, mac_addr, i); -} - -/** - * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr - * @hw: pointer to the HW structure - * - * Checks the nvm for an alternate MAC address. An alternate MAC address - * can be setup by pre-boot software and must be treated like a permanent - * address and must override the actual permanent MAC address. If an - * alternate MAC address is found it is programmed into RAR0, replacing - * the permanent address that was installed into RAR0 by the Si on reset. - * This function will return SUCCESS unless it encounters an error while - * reading the EEPROM. - **/ -s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) -{ - u32 i; - s32 ret_val; - u16 offset, nvm_alt_mac_addr_offset, nvm_data; - u8 alt_mac_addr[ETH_ADDR_LEN]; - - DEBUGFUNC("e1000_check_alt_mac_addr_generic"); - - ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &nvm_data); - if (ret_val) - return ret_val; - - - /* Alternate MAC address is handled by the option ROM for 82580 - * and newer. SW support not required. - */ - if (hw->mac.type >= e1000_82580) - return E1000_SUCCESS; - - ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1, - &nvm_alt_mac_addr_offset); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if ((nvm_alt_mac_addr_offset == 0xFFFF) || - (nvm_alt_mac_addr_offset == 0x0000)) - /* There is no Alternate MAC Address */ - return E1000_SUCCESS; - - if (hw->bus.func == E1000_FUNC_1) - nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; - if (hw->bus.func == E1000_FUNC_2) - nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2; - - if (hw->bus.func == E1000_FUNC_3) - nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3; - for (i = 0; i < ETH_ADDR_LEN; i += 2) { - offset = nvm_alt_mac_addr_offset + (i >> 1); - ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - alt_mac_addr[i] = (u8)(nvm_data & 0xFF); - alt_mac_addr[i + 1] = (u8)(nvm_data >> 8); - } - - /* if multicast bit is set, the alternate address will not be used */ - if (alt_mac_addr[0] & 0x01) { - DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n"); - return E1000_SUCCESS; - } - - /* We have a valid alternate MAC address, and we want to treat it the - * same as the normal permanent MAC address stored by the HW into the - * RAR. Do this by mapping this address into RAR0. - */ - hw->mac.ops.rar_set(hw, alt_mac_addr, 0); - - return E1000_SUCCESS; -} - -/** - * e1000_rar_set_generic - Set receive address register - * @hw: pointer to the HW structure - * @addr: pointer to the receive address - * @index: receive address array register - * - * Sets the receive address array register at index to the address passed - * in by addr. - **/ -static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) -{ - u32 rar_low, rar_high; - - DEBUGFUNC("e1000_rar_set_generic"); - - /* HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); - - rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); - - /* If MAC address zero, no need to set the AV bit */ - if (rar_low || rar_high) - rar_high |= E1000_RAH_AV; - - /* Some bridges will combine consecutive 32-bit writes into - * a single burst write, which will malfunction on some parts. - * The flushes avoid this. - */ - E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); - E1000_WRITE_FLUSH(hw); - E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); - E1000_WRITE_FLUSH(hw); -} - -/** - * e1000_hash_mc_addr_generic - Generate a multicast hash value - * @hw: pointer to the HW structure - * @mc_addr: pointer to a multicast address - * - * Generates a multicast address hash value which is used to determine - * the multicast filter table array address and new table value. - **/ -u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr) -{ - u32 hash_value, hash_mask; - u8 bit_shift = 0; - - DEBUGFUNC("e1000_hash_mc_addr_generic"); - - /* Register count multiplied by bits per register */ - hash_mask = (hw->mac.mta_reg_count * 32) - 1; - - /* For a mc_filter_type of 0, bit_shift is the number of left-shifts - * where 0xFF would still fall within the hash mask. - */ - while (hash_mask >> bit_shift != 0xFF) - bit_shift++; - - /* The portion of the address that is used for the hash table - * is determined by the mc_filter_type setting. - * The algorithm is such that there is a total of 8 bits of shifting. - * The bit_shift for a mc_filter_type of 0 represents the number of - * left-shifts where the MSB of mc_addr[5] would still fall within - * the hash_mask. Case 0 does this exactly. Since there are a total - * of 8 bits of shifting, then mc_addr[4] will shift right the - * remaining number of bits. Thus 8 - bit_shift. The rest of the - * cases are a variation of this algorithm...essentially raising the - * number of bits to shift mc_addr[5] left, while still keeping the - * 8-bit shifting total. - * - * For example, given the following Destination MAC Address and an - * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), - * we can see that the bit_shift for case 0 is 4. These are the hash - * values resulting from each mc_filter_type... - * [0] [1] [2] [3] [4] [5] - * 01 AA 00 12 34 56 - * LSB MSB - * - * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 - * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 - * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 - * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 - */ - switch (hw->mac.mc_filter_type) { - default: - case 0: - break; - case 1: - bit_shift += 1; - break; - case 2: - bit_shift += 2; - break; - case 3: - bit_shift += 4; - break; - } - - hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | - (((u16) mc_addr[5]) << bit_shift))); - - return hash_value; -} - -/** - * e1000_update_mc_addr_list_generic - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * - * Updates entire Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - **/ -void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count) -{ - u32 hash_value, hash_bit, hash_reg; - int i; - - DEBUGFUNC("e1000_update_mc_addr_list_generic"); - - /* clear mta_shadow */ - memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); - - /* update mta_shadow from mc_addr_list */ - for (i = 0; (u32) i < mc_addr_count; i++) { - hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list); - - hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); - hash_bit = hash_value & 0x1F; - - hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); - mc_addr_list += (ETH_ADDR_LEN); - } - - /* replace the entire MTA table */ - for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]); - E1000_WRITE_FLUSH(hw); -} - -/** - * e1000_clear_hw_cntrs_base_generic - Clear base hardware counters - * @hw: pointer to the HW structure - * - * Clears the base hardware counters by reading the counter registers. - **/ -void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_clear_hw_cntrs_base_generic"); - - E1000_READ_REG(hw, E1000_CRCERRS); - E1000_READ_REG(hw, E1000_SYMERRS); - E1000_READ_REG(hw, E1000_MPC); - E1000_READ_REG(hw, E1000_SCC); - E1000_READ_REG(hw, E1000_ECOL); - E1000_READ_REG(hw, E1000_MCC); - E1000_READ_REG(hw, E1000_LATECOL); - E1000_READ_REG(hw, E1000_COLC); - E1000_READ_REG(hw, E1000_DC); - E1000_READ_REG(hw, E1000_SEC); - E1000_READ_REG(hw, E1000_RLEC); - E1000_READ_REG(hw, E1000_XONRXC); - E1000_READ_REG(hw, E1000_XONTXC); - E1000_READ_REG(hw, E1000_XOFFRXC); - E1000_READ_REG(hw, E1000_XOFFTXC); - E1000_READ_REG(hw, E1000_FCRUC); - E1000_READ_REG(hw, E1000_GPRC); - E1000_READ_REG(hw, E1000_BPRC); - E1000_READ_REG(hw, E1000_MPRC); - E1000_READ_REG(hw, E1000_GPTC); - E1000_READ_REG(hw, E1000_GORCL); - E1000_READ_REG(hw, E1000_GORCH); - E1000_READ_REG(hw, E1000_GOTCL); - E1000_READ_REG(hw, E1000_GOTCH); - E1000_READ_REG(hw, E1000_RNBC); - E1000_READ_REG(hw, E1000_RUC); - E1000_READ_REG(hw, E1000_RFC); - E1000_READ_REG(hw, E1000_ROC); - E1000_READ_REG(hw, E1000_RJC); - E1000_READ_REG(hw, E1000_TORL); - E1000_READ_REG(hw, E1000_TORH); - E1000_READ_REG(hw, E1000_TOTL); - E1000_READ_REG(hw, E1000_TOTH); - E1000_READ_REG(hw, E1000_TPR); - E1000_READ_REG(hw, E1000_TPT); - E1000_READ_REG(hw, E1000_MPTC); - E1000_READ_REG(hw, E1000_BPTC); -} - -/** - * e1000_check_for_copper_link_generic - Check for link (Copper) - * @hw: pointer to the HW structure - * - * Checks to see of the link status of the hardware has changed. If a - * change in link status has been detected, then we read the PHY registers - * to get the current speed/duplex if link exists. - **/ -s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - bool link; - - DEBUGFUNC("e1000_check_for_copper_link"); - - /* We only want to go out to the PHY registers to see if Auto-Neg - * has completed and/or if our link status has changed. The - * get_link_status flag is set upon receiving a Link Status - * Change or Rx Sequence Error interrupt. - */ - if (!mac->get_link_status) - return E1000_SUCCESS; - - /* First we want to see if the MII Status Register reports - * link. If so, then we want to get the current speed/duplex - * of the PHY. - */ - ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) - return E1000_SUCCESS; /* No link detected */ - - mac->get_link_status = false; - - /* Check if there was DownShift, must be checked - * immediately after link-up - */ - e1000_check_downshift_generic(hw); - - /* If we are forcing speed/duplex, then we simply return since - * we have already determined whether we have link or not. - */ - if (!mac->autoneg) - return -E1000_ERR_CONFIG; - - /* Auto-Neg is enabled. Auto Speed Detection takes care - * of MAC speed/duplex configuration. So we only need to - * configure Collision Distance in the MAC. - */ - mac->ops.config_collision_dist(hw); - - /* Configure Flow Control now that Auto-Neg has completed. - * First, we need to restore the desired flow control - * settings because we may have had to re-autoneg with a - * different link partner. - */ - ret_val = e1000_config_fc_after_link_up_generic(hw); - if (ret_val) - DEBUGOUT("Error configuring flow control\n"); - - return ret_val; -} - -/** - * e1000_check_for_fiber_link_generic - Check for link (Fiber) - * @hw: pointer to the HW structure - * - * Checks for link up on the hardware. If link is not up and we have - * a signal, then we need to force link up. - **/ -s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 rxcw; - u32 ctrl; - u32 status; - s32 ret_val; - - DEBUGFUNC("e1000_check_for_fiber_link_generic"); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - status = E1000_READ_REG(hw, E1000_STATUS); - rxcw = E1000_READ_REG(hw, E1000_RXCW); - - /* If we don't have link (auto-negotiation failed or link partner - * cannot auto-negotiate), the cable is plugged in (we have signal), - * and our link partner is not trying to auto-negotiate with us (we - * are receiving idles or data), we need to force link up. We also - * need to give auto-negotiation time to complete, in case the cable - * was just plugged in. The autoneg_failed flag does this. - */ - /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ - if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) && - !(rxcw & E1000_RXCW_C)) { - if (!mac->autoneg_failed) { - mac->autoneg_failed = true; - return E1000_SUCCESS; - } - DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); - - /* Disable auto-negotiation in the TXCW register */ - E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); - - /* Force link-up and also force full-duplex. */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Configure Flow Control after forcing link up. */ - ret_val = e1000_config_fc_after_link_up_generic(hw); - if (ret_val) { - DEBUGOUT("Error configuring flow control\n"); - return ret_val; - } - } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* If we are forcing link and we are receiving /C/ ordered - * sets, re-enable auto-negotiation in the TXCW register - * and disable forced link in the Device Control register - * in an attempt to auto-negotiate with our link partner. - */ - DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); - E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); - E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); - - mac->serdes_has_link = true; - } - - return E1000_SUCCESS; -} - -/** - * e1000_check_for_serdes_link_generic - Check for link (Serdes) - * @hw: pointer to the HW structure - * - * Checks for link up on the hardware. If link is not up and we have - * a signal, then we need to force link up. - **/ -s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 rxcw; - u32 ctrl; - u32 status; - s32 ret_val; - - DEBUGFUNC("e1000_check_for_serdes_link_generic"); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - status = E1000_READ_REG(hw, E1000_STATUS); - rxcw = E1000_READ_REG(hw, E1000_RXCW); - - /* If we don't have link (auto-negotiation failed or link partner - * cannot auto-negotiate), and our link partner is not trying to - * auto-negotiate with us (we are receiving idles or data), - * we need to force link up. We also need to give auto-negotiation - * time to complete. - */ - /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ - if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) { - if (!mac->autoneg_failed) { - mac->autoneg_failed = true; - return E1000_SUCCESS; - } - DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); - - /* Disable auto-negotiation in the TXCW register */ - E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); - - /* Force link-up and also force full-duplex. */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Configure Flow Control after forcing link up. */ - ret_val = e1000_config_fc_after_link_up_generic(hw); - if (ret_val) { - DEBUGOUT("Error configuring flow control\n"); - return ret_val; - } - } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* If we are forcing link and we are receiving /C/ ordered - * sets, re-enable auto-negotiation in the TXCW register - * and disable forced link in the Device Control register - * in an attempt to auto-negotiate with our link partner. - */ - DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); - E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); - E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); - - mac->serdes_has_link = true; - } else if (!(E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW))) { - /* If we force link for non-auto-negotiation switch, check - * link status based on MAC synchronization for internal - * serdes media type. - */ - /* SYNCH bit and IV bit are sticky. */ - usec_delay(10); - rxcw = E1000_READ_REG(hw, E1000_RXCW); - if (rxcw & E1000_RXCW_SYNCH) { - if (!(rxcw & E1000_RXCW_IV)) { - mac->serdes_has_link = true; - DEBUGOUT("SERDES: Link up - forced.\n"); - } - } else { - mac->serdes_has_link = false; - DEBUGOUT("SERDES: Link down - force failed.\n"); - } - } - - if (E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW)) { - status = E1000_READ_REG(hw, E1000_STATUS); - if (status & E1000_STATUS_LU) { - /* SYNCH bit and IV bit are sticky, so reread rxcw. */ - usec_delay(10); - rxcw = E1000_READ_REG(hw, E1000_RXCW); - if (rxcw & E1000_RXCW_SYNCH) { - if (!(rxcw & E1000_RXCW_IV)) { - mac->serdes_has_link = true; - DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n"); - } else { - mac->serdes_has_link = false; - DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n"); - } - } else { - mac->serdes_has_link = false; - DEBUGOUT("SERDES: Link down - no sync.\n"); - } - } else { - mac->serdes_has_link = false; - DEBUGOUT("SERDES: Link down - autoneg failed\n"); - } - } - - return E1000_SUCCESS; -} - -/** - * e1000_set_default_fc_generic - Set flow control default values - * @hw: pointer to the HW structure - * - * Read the EEPROM for the default values for flow control and store the - * values. - **/ -static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) -{ - s32 ret_val; - u16 nvm_data; - - DEBUGFUNC("e1000_set_default_fc_generic"); - - /* Read and store word 0x0F of the EEPROM. This word contains bits - * that determine the hardware's default PAUSE (flow control) mode, - * a bit that determines whether the HW defaults to enabling or - * disabling auto-negotiation, and the direction of the - * SW defined pins. If there is no SW over-ride of the flow - * control setting, then the variable hw->fc will - * be initialized based on a value in the EEPROM. - */ - ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); - - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if (!(nvm_data & NVM_WORD0F_PAUSE_MASK)) - hw->fc.requested_mode = e1000_fc_none; - else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == - NVM_WORD0F_ASM_DIR) - hw->fc.requested_mode = e1000_fc_tx_pause; - else - hw->fc.requested_mode = e1000_fc_full; - - return E1000_SUCCESS; -} - -/** - * e1000_setup_link_generic - Setup flow control and link settings - * @hw: pointer to the HW structure - * - * Determines which flow control settings to use, then configures flow - * control. Calls the appropriate media-specific link configuration - * function. Assuming the adapter has a valid link partner, a valid link - * should be established. Assumes the hardware has previously been reset - * and the transmitter and receiver are not enabled. - **/ -s32 e1000_setup_link_generic(struct e1000_hw *hw) -{ - s32 ret_val; - - DEBUGFUNC("e1000_setup_link_generic"); - - /* In the case of the phy reset being blocked, we already have a link. - * We do not need to set it up again. - */ - if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) - return E1000_SUCCESS; - - /* If requested flow control is set to default, set flow control - * based on the EEPROM flow control settings. - */ - if (hw->fc.requested_mode == e1000_fc_default) { - ret_val = e1000_set_default_fc_generic(hw); - if (ret_val) - return ret_val; - } - - /* Save off the requested flow control mode for use later. Depending - * on the link partner's capabilities, we may or may not use this mode. - */ - hw->fc.current_mode = hw->fc.requested_mode; - - DEBUGOUT1("After fix-ups FlowControl is now = %x\n", - hw->fc.current_mode); - - /* Call the necessary media_type subroutine to configure the link. */ - ret_val = hw->mac.ops.setup_physical_interface(hw); - if (ret_val) - return ret_val; - - /* Initialize the flow control address, type, and PAUSE timer - * registers to their default values. This is done even if flow - * control is disabled, because it does not hurt anything to - * initialize these registers. - */ - DEBUGOUT("Initializing the Flow Control address, type and timer regs\n"); - E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE); - E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH); - E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW); - - E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time); - - return e1000_set_fc_watermarks_generic(hw); -} - -/** - * e1000_commit_fc_settings_generic - Configure flow control - * @hw: pointer to the HW structure - * - * Write the flow control settings to the Transmit Config Word Register (TXCW) - * base on the flow control settings in e1000_mac_info. - **/ -static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 txcw; - - DEBUGFUNC("e1000_commit_fc_settings_generic"); - - /* Check for a software override of the flow control settings, and - * setup the device accordingly. If auto-negotiation is enabled, then - * software will have to set the "PAUSE" bits to the correct value in - * the Transmit Config Word Register (TXCW) and re-start auto- - * negotiation. However, if auto-negotiation is disabled, then - * software will have to manually configure the two flow control enable - * bits in the CTRL register. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but we - * do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. - */ - switch (hw->fc.current_mode) { - case e1000_fc_none: - /* Flow control completely disabled by a software over-ride. */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); - break; - case e1000_fc_rx_pause: - /* Rx Flow control is enabled and Tx Flow control is disabled - * by a software over-ride. Since there really isn't a way to - * advertise that we are capable of Rx Pause ONLY, we will - * advertise that we support both symmetric and asymmetric Rx - * PAUSE. Later, we will disable the adapter's ability to send - * PAUSE frames. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - case e1000_fc_tx_pause: - /* Tx Flow control is enabled, and Rx Flow control is disabled, - * by a software over-ride. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); - break; - case e1000_fc_full: - /* Flow control (both Rx and Tx) is enabled by a software - * over-ride. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - break; - } - - E1000_WRITE_REG(hw, E1000_TXCW, txcw); - mac->txcw = txcw; - - return E1000_SUCCESS; -} - -/** - * e1000_poll_fiber_serdes_link_generic - Poll for link up - * @hw: pointer to the HW structure - * - * Polls for link up by reading the status register, if link fails to come - * up with auto-negotiation, then the link is forced if a signal is detected. - **/ -static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 i, status; - s32 ret_val; - - DEBUGFUNC("e1000_poll_fiber_serdes_link_generic"); - - /* If we have a signal (the cable is plugged in, or assumed true for - * serdes media) then poll for a "Link-Up" indication in the Device - * Status Register. Time-out if a link isn't seen in 500 milliseconds - * seconds (Auto-negotiation should complete in less than 500 - * milliseconds even if the other end is doing it in SW). - */ - for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { - msec_delay(10); - status = E1000_READ_REG(hw, E1000_STATUS); - if (status & E1000_STATUS_LU) - break; - } - if (i == FIBER_LINK_UP_LIMIT) { - DEBUGOUT("Never got a valid link from auto-neg!!!\n"); - mac->autoneg_failed = true; - /* AutoNeg failed to achieve a link, so we'll call - * mac->check_for_link. This routine will force the - * link up if we detect a signal. This will allow us to - * communicate with non-autonegotiating link partners. - */ - ret_val = mac->ops.check_for_link(hw); - if (ret_val) { - DEBUGOUT("Error while checking for link\n"); - return ret_val; - } - mac->autoneg_failed = false; - } else { - mac->autoneg_failed = false; - DEBUGOUT("Valid Link Found\n"); - } - - return E1000_SUCCESS; -} - -/** - * e1000_setup_fiber_serdes_link_generic - Setup link for fiber/serdes - * @hw: pointer to the HW structure - * - * Configures collision distance and flow control for fiber and serdes - * links. Upon successful setup, poll for link. - **/ -s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - - DEBUGFUNC("e1000_setup_fiber_serdes_link_generic"); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - /* Take the link out of reset */ - ctrl &= ~E1000_CTRL_LRST; - - hw->mac.ops.config_collision_dist(hw); - - ret_val = e1000_commit_fc_settings_generic(hw); - if (ret_val) - return ret_val; - - /* Since auto-negotiation is enabled, take the link out of reset (the - * link will be in reset, because we previously reset the chip). This - * will restart auto-negotiation. If auto-negotiation is successful - * then the link-up status bit will be set and the flow control enable - * bits (RFCE and TFCE) will be set according to their negotiated value. - */ - DEBUGOUT("Auto-negotiation enabled\n"); - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - E1000_WRITE_FLUSH(hw); - msec_delay(1); - - /* For these adapters, the SW definable pin 1 is set when the optics - * detect a signal. If we have a signal, then poll for a "Link-Up" - * indication. - */ - if (hw->phy.media_type == e1000_media_type_internal_serdes || - (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) { - ret_val = e1000_poll_fiber_serdes_link_generic(hw); - } else { - DEBUGOUT("No signal detected\n"); - } - - return ret_val; -} - -/** - * e1000_config_collision_dist_generic - Configure collision distance - * @hw: pointer to the HW structure - * - * Configures the collision distance to the default value and is used - * during link setup. - **/ -static void e1000_config_collision_dist_generic(struct e1000_hw *hw) -{ - u32 tctl; - - DEBUGFUNC("e1000_config_collision_dist_generic"); - - tctl = E1000_READ_REG(hw, E1000_TCTL); - - tctl &= ~E1000_TCTL_COLD; - tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; - - E1000_WRITE_REG(hw, E1000_TCTL, tctl); - E1000_WRITE_FLUSH(hw); -} - -/** - * e1000_set_fc_watermarks_generic - Set flow control high/low watermarks - * @hw: pointer to the HW structure - * - * Sets the flow control high/low threshold (watermark) registers. If - * flow control XON frame transmission is enabled, then set XON frame - * transmission as well. - **/ -s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw) -{ - u32 fcrtl = 0, fcrth = 0; - - DEBUGFUNC("e1000_set_fc_watermarks_generic"); - - /* Set the flow control receive threshold registers. Normally, - * these registers will be set to a default threshold that may be - * adjusted later by the driver's runtime code. However, if the - * ability to transmit pause frames is not enabled, then these - * registers will be set to 0. - */ - if (hw->fc.current_mode & e1000_fc_tx_pause) { - /* We need to set up the Receive Threshold high and low water - * marks as well as (optionally) enabling the transmission of - * XON frames. - */ - fcrtl = hw->fc.low_water; - if (hw->fc.send_xon) - fcrtl |= E1000_FCRTL_XONE; - - fcrth = hw->fc.high_water; - } - E1000_WRITE_REG(hw, E1000_FCRTL, fcrtl); - E1000_WRITE_REG(hw, E1000_FCRTH, fcrth); - - return E1000_SUCCESS; -} - -/** - * e1000_force_mac_fc_generic - Force the MAC's flow control settings - * @hw: pointer to the HW structure - * - * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the - * device control register to reflect the adapter settings. TFCE and RFCE - * need to be explicitly set by software when a copper PHY is used because - * autonegotiation is managed by the PHY rather than the MAC. Software must - * also configure these bits when link is forced on a fiber connection. - **/ -s32 e1000_force_mac_fc_generic(struct e1000_hw *hw) -{ - u32 ctrl; - - DEBUGFUNC("e1000_force_mac_fc_generic"); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - /* Because we didn't get link via the internal auto-negotiation - * mechanism (we either forced link or we got link via PHY - * auto-neg), we have to manually enable/disable transmit an - * receive flow control. - * - * The "Case" statement below enables/disable flow control - * according to the "hw->fc.current_mode" parameter. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause - * frames but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). - * 3: Both Rx and Tx flow control (symmetric) is enabled. - * other: No other values should be possible at this point. - */ - DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode); - - switch (hw->fc.current_mode) { - case e1000_fc_none: - ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); - break; - case e1000_fc_rx_pause: - ctrl &= (~E1000_CTRL_TFCE); - ctrl |= E1000_CTRL_RFCE; - break; - case e1000_fc_tx_pause: - ctrl &= (~E1000_CTRL_RFCE); - ctrl |= E1000_CTRL_TFCE; - break; - case e1000_fc_full: - ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - } - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - return E1000_SUCCESS; -} - -/** - * e1000_config_fc_after_link_up_generic - Configures flow control after link - * @hw: pointer to the HW structure - * - * Checks the status of auto-negotiation after link up to ensure that the - * speed and duplex were not forced. If the link needed to be forced, then - * flow control needs to be forced also. If auto-negotiation is enabled - * and did not fail, then we configure flow control based on our link - * partner. - **/ -s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val = E1000_SUCCESS; - u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg; - u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; - u16 speed, duplex; - - DEBUGFUNC("e1000_config_fc_after_link_up_generic"); - - /* Check for the case where we have fiber media and auto-neg failed - * so we had to force link. In this case, we need to force the - * configuration of the MAC to match the "fc" parameter. - */ - if (mac->autoneg_failed) { - if (hw->phy.media_type == e1000_media_type_fiber || - hw->phy.media_type == e1000_media_type_internal_serdes) - ret_val = e1000_force_mac_fc_generic(hw); - } else { - if (hw->phy.media_type == e1000_media_type_copper) - ret_val = e1000_force_mac_fc_generic(hw); - } - - if (ret_val) { - DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; - } - - /* Check for the case where we have copper media and auto-neg is - * enabled. In this case, we need to check and see if Auto-Neg - * has completed, and if so, how the PHY and link partner has - * flow control configured. - */ - if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { - /* Read the MII Status Register and check to see if AutoNeg - * has completed. We read this twice because this reg has - * some "sticky" (latched) bits. - */ - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - DEBUGOUT("Copper PHY and Auto Neg has not completed.\n"); - return ret_val; - } - - /* The AutoNeg process has completed, so we now need to - * read both the Auto Negotiation Advertisement - * Register (Address 4) and the Auto_Negotiation Base - * Page Ability Register (Address 5) to determine how - * flow control was negotiated. - */ - ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV, - &mii_nway_adv_reg); - if (ret_val) - return ret_val; - ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY, - &mii_nway_lp_ability_reg); - if (ret_val) - return ret_val; - - /* Two bits in the Auto Negotiation Advertisement Register - * (Address 4) and two bits in the Auto Negotiation Base - * Page Ability Register (Address 5) determine flow control - * for both the PHY and the link partner. The following - * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, - * 1999, describes these PAUSE resolution bits and how flow - * control is determined based upon these settings. - * NOTE: DC = Don't Care - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution - *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | e1000_fc_none - * 0 | 1 | 0 | DC | e1000_fc_none - * 0 | 1 | 1 | 0 | e1000_fc_none - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * 1 | 0 | 0 | DC | e1000_fc_none - * 1 | DC | 1 | DC | e1000_fc_full - * 1 | 1 | 0 | 0 | e1000_fc_none - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - * - * Are both PAUSE bits set to 1? If so, this implies - * Symmetric Flow Control is enabled at both ends. The - * ASM_DIR bits are irrelevant per the spec. - * - * For Symmetric Flow Control: - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | E1000_fc_full - * - */ - if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* Now we need to check if the user selected Rx ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise Rx - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. - */ - if (hw->fc.requested_mode == e1000_fc_full) { - hw->fc.current_mode = e1000_fc_full; - DEBUGOUT("Flow Control = FULL.\n"); - } else { - hw->fc.current_mode = e1000_fc_rx_pause; - DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); - } - } - /* For receiving PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - */ - else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.current_mode = e1000_fc_tx_pause; - DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); - } - /* For transmitting PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - */ - else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.current_mode = e1000_fc_rx_pause; - DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); - } else { - /* Per the IEEE spec, at this point flow control - * should be disabled. - */ - hw->fc.current_mode = e1000_fc_none; - DEBUGOUT("Flow Control = NONE.\n"); - } - - /* Now we need to do one last check... If we auto- - * negotiated to HALF DUPLEX, flow control should not be - * enabled per IEEE 802.3 spec. - */ - ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); - if (ret_val) { - DEBUGOUT("Error getting link speed and duplex\n"); - return ret_val; - } - - if (duplex == HALF_DUPLEX) - hw->fc.current_mode = e1000_fc_none; - - /* Now we call a subroutine to actually force the MAC - * controller to use the correct flow control settings. - */ - ret_val = e1000_force_mac_fc_generic(hw); - if (ret_val) { - DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; - } - } - - /* Check for the case where we have SerDes media and auto-neg is - * enabled. In this case, we need to check and see if Auto-Neg - * has completed, and if so, how the PHY and link partner has - * flow control configured. - */ - if ((hw->phy.media_type == e1000_media_type_internal_serdes) && - mac->autoneg) { - /* Read the PCS_LSTS and check to see if AutoNeg - * has completed. - */ - pcs_status_reg = E1000_READ_REG(hw, E1000_PCS_LSTAT); - - if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) { - DEBUGOUT("PCS Auto Neg has not completed.\n"); - return ret_val; - } - - /* The AutoNeg process has completed, so we now need to - * read both the Auto Negotiation Advertisement - * Register (PCS_ANADV) and the Auto_Negotiation Base - * Page Ability Register (PCS_LPAB) to determine how - * flow control was negotiated. - */ - pcs_adv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); - pcs_lp_ability_reg = E1000_READ_REG(hw, E1000_PCS_LPAB); - - /* Two bits in the Auto Negotiation Advertisement Register - * (PCS_ANADV) and two bits in the Auto Negotiation Base - * Page Ability Register (PCS_LPAB) determine flow control - * for both the PHY and the link partner. The following - * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, - * 1999, describes these PAUSE resolution bits and how flow - * control is determined based upon these settings. - * NOTE: DC = Don't Care - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution - *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | e1000_fc_none - * 0 | 1 | 0 | DC | e1000_fc_none - * 0 | 1 | 1 | 0 | e1000_fc_none - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * 1 | 0 | 0 | DC | e1000_fc_none - * 1 | DC | 1 | DC | e1000_fc_full - * 1 | 1 | 0 | 0 | e1000_fc_none - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - * - * Are both PAUSE bits set to 1? If so, this implies - * Symmetric Flow Control is enabled at both ends. The - * ASM_DIR bits are irrelevant per the spec. - * - * For Symmetric Flow Control: - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | e1000_fc_full - * - */ - if ((pcs_adv_reg & E1000_TXCW_PAUSE) && - (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) { - /* Now we need to check if the user selected Rx ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise Rx - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. - */ - if (hw->fc.requested_mode == e1000_fc_full) { - hw->fc.current_mode = e1000_fc_full; - DEBUGOUT("Flow Control = FULL.\n"); - } else { - hw->fc.current_mode = e1000_fc_rx_pause; - DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); - } - } - /* For receiving PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - */ - else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) && - (pcs_adv_reg & E1000_TXCW_ASM_DIR) && - (pcs_lp_ability_reg & E1000_TXCW_PAUSE) && - (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { - hw->fc.current_mode = e1000_fc_tx_pause; - DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); - } - /* For transmitting PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - */ - else if ((pcs_adv_reg & E1000_TXCW_PAUSE) && - (pcs_adv_reg & E1000_TXCW_ASM_DIR) && - !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) && - (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { - hw->fc.current_mode = e1000_fc_rx_pause; - DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); - } else { - /* Per the IEEE spec, at this point flow control - * should be disabled. - */ - hw->fc.current_mode = e1000_fc_none; - DEBUGOUT("Flow Control = NONE.\n"); - } - - /* Now we call a subroutine to actually force the MAC - * controller to use the correct flow control settings. - */ - pcs_ctrl_reg = E1000_READ_REG(hw, E1000_PCS_LCTL); - pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL; - E1000_WRITE_REG(hw, E1000_PCS_LCTL, pcs_ctrl_reg); - - ret_val = e1000_force_mac_fc_generic(hw); - if (ret_val) { - DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; - } - } - - return E1000_SUCCESS; -} - -/** - * e1000_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * Read the status register for the current speed/duplex and store the current - * speed and duplex for copper connections. - **/ -s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, - u16 *duplex) -{ - u32 status; - - DEBUGFUNC("e1000_get_speed_and_duplex_copper_generic"); - - status = E1000_READ_REG(hw, E1000_STATUS); - if (status & E1000_STATUS_SPEED_1000) { - *speed = SPEED_1000; - DEBUGOUT("1000 Mbs, "); - } else if (status & E1000_STATUS_SPEED_100) { - *speed = SPEED_100; - DEBUGOUT("100 Mbs, "); - } else { - *speed = SPEED_10; - DEBUGOUT("10 Mbs, "); - } - - if (status & E1000_STATUS_FD) { - *duplex = FULL_DUPLEX; - DEBUGOUT("Full Duplex\n"); - } else { - *duplex = HALF_DUPLEX; - DEBUGOUT("Half Duplex\n"); - } - - return E1000_SUCCESS; -} - -/** - * e1000_get_speed_and_duplex_fiber_generic - Retrieve current speed/duplex - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * Sets the speed and duplex to gigabit full duplex (the only possible option) - * for fiber/serdes links. - **/ -s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSEDARG *hw, - u16 *speed, u16 *duplex) -{ - DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic"); - - *speed = SPEED_1000; - *duplex = FULL_DUPLEX; - - return E1000_SUCCESS; -} - -/** - * e1000_get_hw_semaphore_generic - Acquire hardware semaphore - * @hw: pointer to the HW structure - * - * Acquire the HW semaphore to access the PHY or NVM - **/ -s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw) -{ - u32 swsm; - s32 timeout = hw->nvm.word_size + 1; - s32 i = 0; - - DEBUGFUNC("e1000_get_hw_semaphore_generic"); - - /* Get the SW semaphore */ - while (i < timeout) { - swsm = E1000_READ_REG(hw, E1000_SWSM); - if (!(swsm & E1000_SWSM_SMBI)) - break; - - usec_delay(50); - i++; - } - - if (i == timeout) { - DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); - return -E1000_ERR_NVM; - } - - /* Get the FW semaphore. */ - for (i = 0; i < timeout; i++) { - swsm = E1000_READ_REG(hw, E1000_SWSM); - E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); - - /* Semaphore acquired if bit latched */ - if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) - break; - - usec_delay(50); - } - - if (i == timeout) { - /* Release semaphores */ - e1000_put_hw_semaphore_generic(hw); - DEBUGOUT("Driver can't access the NVM\n"); - return -E1000_ERR_NVM; - } - - return E1000_SUCCESS; -} - -/** - * e1000_put_hw_semaphore_generic - Release hardware semaphore - * @hw: pointer to the HW structure - * - * Release hardware semaphore used to access the PHY or NVM - **/ -void e1000_put_hw_semaphore_generic(struct e1000_hw *hw) -{ - u32 swsm; - - DEBUGFUNC("e1000_put_hw_semaphore_generic"); - - swsm = E1000_READ_REG(hw, E1000_SWSM); - - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); - - E1000_WRITE_REG(hw, E1000_SWSM, swsm); -} - -/** - * e1000_get_auto_rd_done_generic - Check for auto read completion - * @hw: pointer to the HW structure - * - * Check EEPROM for Auto Read done bit. - **/ -s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw) -{ - s32 i = 0; - - DEBUGFUNC("e1000_get_auto_rd_done_generic"); - - while (i < AUTO_READ_DONE_TIMEOUT) { - if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_AUTO_RD) - break; - msec_delay(1); - i++; - } - - if (i == AUTO_READ_DONE_TIMEOUT) { - DEBUGOUT("Auto read by HW from NVM has not completed.\n"); - return -E1000_ERR_RESET; - } - - return E1000_SUCCESS; -} - -/** - * e1000_valid_led_default_generic - Verify a valid default LED config - * @hw: pointer to the HW structure - * @data: pointer to the NVM (EEPROM) - * - * Read the EEPROM for the current default LED configuration. If the - * LED configuration is not valid, set to a valid LED configuration. - **/ -s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_valid_led_default_generic"); - - ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) - *data = ID_LED_DEFAULT; - - return E1000_SUCCESS; -} - -/** - * e1000_id_led_init_generic - - * @hw: pointer to the HW structure - * - **/ -s32 e1000_id_led_init_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - const u32 ledctl_mask = 0x000000FF; - const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; - const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; - u16 data, i, temp; - const u16 led_mask = 0x0F; - - DEBUGFUNC("e1000_id_led_init_generic"); - - ret_val = hw->nvm.ops.valid_led_default(hw, &data); - if (ret_val) - return ret_val; - - mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL); - mac->ledctl_mode1 = mac->ledctl_default; - mac->ledctl_mode2 = mac->ledctl_default; - - for (i = 0; i < 4; i++) { - temp = (data >> (i << 2)) & led_mask; - switch (temp) { - case ID_LED_ON1_DEF2: - case ID_LED_ON1_ON2: - case ID_LED_ON1_OFF2: - mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode1 |= ledctl_on << (i << 3); - break; - case ID_LED_OFF1_DEF2: - case ID_LED_OFF1_ON2: - case ID_LED_OFF1_OFF2: - mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode1 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - switch (temp) { - case ID_LED_DEF1_ON2: - case ID_LED_ON1_ON2: - case ID_LED_OFF1_ON2: - mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode2 |= ledctl_on << (i << 3); - break; - case ID_LED_DEF1_OFF2: - case ID_LED_ON1_OFF2: - case ID_LED_OFF1_OFF2: - mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode2 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - } - - return E1000_SUCCESS; -} - -/** - * e1000_setup_led_generic - Configures SW controllable LED - * @hw: pointer to the HW structure - * - * This prepares the SW controllable LED for use and saves the current state - * of the LED so it can be later restored. - **/ -s32 e1000_setup_led_generic(struct e1000_hw *hw) -{ - u32 ledctl; - - DEBUGFUNC("e1000_setup_led_generic"); - - if (hw->mac.ops.setup_led != e1000_setup_led_generic) - return -E1000_ERR_CONFIG; - - if (hw->phy.media_type == e1000_media_type_fiber) { - ledctl = E1000_READ_REG(hw, E1000_LEDCTL); - hw->mac.ledctl_default = ledctl; - /* Turn off LED0 */ - ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK | - E1000_LEDCTL_LED0_MODE_MASK); - ledctl |= (E1000_LEDCTL_MODE_LED_OFF << - E1000_LEDCTL_LED0_MODE_SHIFT); - E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl); - } else if (hw->phy.media_type == e1000_media_type_copper) { - E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); - } - - return E1000_SUCCESS; -} - -/** - * e1000_cleanup_led_generic - Set LED config to default operation - * @hw: pointer to the HW structure - * - * Remove the current LED configuration and set the LED configuration - * to the default value, saved from the EEPROM. - **/ -s32 e1000_cleanup_led_generic(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_cleanup_led_generic"); - - E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default); - return E1000_SUCCESS; -} - -/** - * e1000_blink_led_generic - Blink LED - * @hw: pointer to the HW structure - * - * Blink the LEDs which are set to be on. - **/ -s32 e1000_blink_led_generic(struct e1000_hw *hw) -{ - u32 ledctl_blink = 0; - u32 i; - - DEBUGFUNC("e1000_blink_led_generic"); - - if (hw->phy.media_type == e1000_media_type_fiber) { - /* always blink LED0 for PCI-E fiber */ - ledctl_blink = E1000_LEDCTL_LED0_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); - } else { - /* Set the blink bit for each LED that's "on" (0x0E) - * (or "off" if inverted) in ledctl_mode2. The blink - * logic in hardware only works when mode is set to "on" - * so it must be changed accordingly when the mode is - * "off" and inverted. - */ - ledctl_blink = hw->mac.ledctl_mode2; - for (i = 0; i < 32; i += 8) { - u32 mode = (hw->mac.ledctl_mode2 >> i) & - E1000_LEDCTL_LED0_MODE_MASK; - u32 led_default = hw->mac.ledctl_default >> i; - - if ((!(led_default & E1000_LEDCTL_LED0_IVRT) && - (mode == E1000_LEDCTL_MODE_LED_ON)) || - ((led_default & E1000_LEDCTL_LED0_IVRT) && - (mode == E1000_LEDCTL_MODE_LED_OFF))) { - ledctl_blink &= - ~(E1000_LEDCTL_LED0_MODE_MASK << i); - ledctl_blink |= (E1000_LEDCTL_LED0_BLINK | - E1000_LEDCTL_MODE_LED_ON) << i; - } - } - } - - E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink); - - return E1000_SUCCESS; -} - -/** - * e1000_led_on_generic - Turn LED on - * @hw: pointer to the HW structure - * - * Turn LED on. - **/ -s32 e1000_led_on_generic(struct e1000_hw *hw) -{ - u32 ctrl; - - DEBUGFUNC("e1000_led_on_generic"); - - switch (hw->phy.media_type) { - case e1000_media_type_fiber: - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - break; - case e1000_media_type_copper: - E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2); - break; - default: - break; - } - - return E1000_SUCCESS; -} - -/** - * e1000_led_off_generic - Turn LED off - * @hw: pointer to the HW structure - * - * Turn LED off. - **/ -s32 e1000_led_off_generic(struct e1000_hw *hw) -{ - u32 ctrl; - - DEBUGFUNC("e1000_led_off_generic"); - - switch (hw->phy.media_type) { - case e1000_media_type_fiber: - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - break; - case e1000_media_type_copper: - E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); - break; - default: - break; - } - - return E1000_SUCCESS; -} - -/** - * e1000_set_pcie_no_snoop_generic - Set PCI-express capabilities - * @hw: pointer to the HW structure - * @no_snoop: bitmap of snoop events - * - * Set the PCI-express register to snoop for events enabled in 'no_snoop'. - **/ -void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop) -{ - u32 gcr; - - DEBUGFUNC("e1000_set_pcie_no_snoop_generic"); - - if (no_snoop) { - gcr = E1000_READ_REG(hw, E1000_GCR); - gcr &= ~(PCIE_NO_SNOOP_ALL); - gcr |= no_snoop; - E1000_WRITE_REG(hw, E1000_GCR, gcr); - } -} - -/** - * e1000_disable_pcie_master_generic - Disables PCI-express master access - * @hw: pointer to the HW structure - * - * Returns E1000_SUCCESS if successful, else returns -10 - * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused - * the master requests to be disabled. - * - * Disables PCI-Express master access and verifies there are no pending - * requests. - **/ -s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw) -{ - u32 ctrl; - s32 timeout = MASTER_DISABLE_TIMEOUT; - - DEBUGFUNC("e1000_disable_pcie_master_generic"); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - while (timeout) { - if (!(E1000_READ_REG(hw, E1000_STATUS) & - E1000_STATUS_GIO_MASTER_ENABLE)) - break; - usec_delay(100); - timeout--; - } - - if (!timeout) { - DEBUGOUT("Master requests are pending.\n"); - return -E1000_ERR_MASTER_REQUESTS_PENDING; - } - - return E1000_SUCCESS; -} - -/** - * e1000_reset_adaptive_generic - Reset Adaptive Interframe Spacing - * @hw: pointer to the HW structure - * - * Reset the Adaptive Interframe Spacing throttle to default values. - **/ -void e1000_reset_adaptive_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - - DEBUGFUNC("e1000_reset_adaptive_generic"); - - if (!mac->adaptive_ifs) { - DEBUGOUT("Not in Adaptive IFS mode!\n"); - return; - } - - mac->current_ifs_val = 0; - mac->ifs_min_val = IFS_MIN; - mac->ifs_max_val = IFS_MAX; - mac->ifs_step_size = IFS_STEP; - mac->ifs_ratio = IFS_RATIO; - - mac->in_ifs_mode = false; - E1000_WRITE_REG(hw, E1000_AIT, 0); -} - -/** - * e1000_update_adaptive_generic - Update Adaptive Interframe Spacing - * @hw: pointer to the HW structure - * - * Update the Adaptive Interframe Spacing Throttle value based on the - * time between transmitted packets and time between collisions. - **/ -void e1000_update_adaptive_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - - DEBUGFUNC("e1000_update_adaptive_generic"); - - if (!mac->adaptive_ifs) { - DEBUGOUT("Not in Adaptive IFS mode!\n"); - return; - } - - if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { - if (mac->tx_packet_delta > MIN_NUM_XMITS) { - mac->in_ifs_mode = true; - if (mac->current_ifs_val < mac->ifs_max_val) { - if (!mac->current_ifs_val) - mac->current_ifs_val = mac->ifs_min_val; - else - mac->current_ifs_val += - mac->ifs_step_size; - E1000_WRITE_REG(hw, E1000_AIT, - mac->current_ifs_val); - } - } - } else { - if (mac->in_ifs_mode && - (mac->tx_packet_delta <= MIN_NUM_XMITS)) { - mac->current_ifs_val = 0; - mac->in_ifs_mode = false; - E1000_WRITE_REG(hw, E1000_AIT, 0); - } - } -} - -/** - * e1000_validate_mdi_setting_generic - Verify MDI/MDIx settings - * @hw: pointer to the HW structure - * - * Verify that when not using auto-negotiation that MDI/MDIx is correctly - * set, which is forced to MDI mode only. - **/ -static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_validate_mdi_setting_generic"); - - if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { - DEBUGOUT("Invalid MDI setting detected\n"); - hw->phy.mdix = 1; - return -E1000_ERR_CONFIG; - } - - return E1000_SUCCESS; -} - -/** - * e1000_validate_mdi_setting_crossover_generic - Verify MDI/MDIx settings - * @hw: pointer to the HW structure - * - * Validate the MDI/MDIx setting, allowing for auto-crossover during forced - * operation. - **/ -s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw E1000_UNUSEDARG *hw) -{ - DEBUGFUNC("e1000_validate_mdi_setting_crossover_generic"); - - return E1000_SUCCESS; -} - -/** - * e1000_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register - * @hw: pointer to the HW structure - * @reg: 32bit register offset such as E1000_SCTL - * @offset: register offset to write to - * @data: data to write at register offset - * - * Writes an address/data control type register. There are several of these - * and they all have the format address << 8 | data and bit 31 is polled for - * completion. - **/ -s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, - u32 offset, u8 data) -{ - u32 i, regvalue = 0; - - DEBUGFUNC("e1000_write_8bit_ctrl_reg_generic"); - - /* Set up the address and data */ - regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT); - E1000_WRITE_REG(hw, reg, regvalue); - - /* Poll the ready bit to see if the MDI read completed */ - for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) { - usec_delay(5); - regvalue = E1000_READ_REG(hw, reg); - if (regvalue & E1000_GEN_CTL_READY) - break; - } - if (!(regvalue & E1000_GEN_CTL_READY)) { - DEBUGOUT1("Reg %08x did not indicate ready\n", reg); - return -E1000_ERR_PHY; - } - - return E1000_SUCCESS; -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.h b/kernel/linux/kni/ethtool/igb/e1000_mac.h deleted file mode 100644 index a3e784982b..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_mac.h +++ /dev/null @@ -1,65 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_MAC_H_ -#define _E1000_MAC_H_ - -void e1000_init_mac_ops_generic(struct e1000_hw *hw); -void e1000_null_mac_generic(struct e1000_hw *hw); -s32 e1000_null_ops_generic(struct e1000_hw *hw); -s32 e1000_null_link_info(struct e1000_hw *hw, u16 *s, u16 *d); -bool e1000_null_mng_mode(struct e1000_hw *hw); -void e1000_null_update_mc(struct e1000_hw *hw, u8 *h, u32 a); -void e1000_null_write_vfta(struct e1000_hw *hw, u32 a, u32 b); -void e1000_null_rar_set(struct e1000_hw *hw, u8 *h, u32 a); -s32 e1000_blink_led_generic(struct e1000_hw *hw); -s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw); -s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw); -s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw); -s32 e1000_cleanup_led_generic(struct e1000_hw *hw); -s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw); -s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw); -s32 e1000_force_mac_fc_generic(struct e1000_hw *hw); -s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw); -s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw); -void e1000_set_lan_id_single_port(struct e1000_hw *hw); -s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw); -s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, - u16 *duplex); -s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw, - u16 *speed, u16 *duplex); -s32 e1000_id_led_init_generic(struct e1000_hw *hw); -s32 e1000_led_on_generic(struct e1000_hw *hw); -s32 e1000_led_off_generic(struct e1000_hw *hw); -void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count); -s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw); -s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw); -s32 e1000_setup_led_generic(struct e1000_hw *hw); -s32 e1000_setup_link_generic(struct e1000_hw *hw); -s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw); -s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, - u32 offset, u8 data); - -u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr); - -void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw); -void e1000_clear_vfta_generic(struct e1000_hw *hw); -void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count); -void e1000_put_hw_semaphore_generic(struct e1000_hw *hw); -s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); -void e1000_reset_adaptive_generic(struct e1000_hw *hw); -void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop); -void e1000_update_adaptive_generic(struct e1000_hw *hw); -void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); - -#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.c b/kernel/linux/kni/ethtool/igb/e1000_manage.c deleted file mode 100644 index 2f75bc357f..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_manage.c +++ /dev/null @@ -1,539 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000_api.h" - -/** - * e1000_calculate_checksum - Calculate checksum for buffer - * @buffer: pointer to EEPROM - * @length: size of EEPROM to calculate a checksum for - * - * Calculates the checksum for some buffer on a specified length. The - * checksum calculated is returned. - **/ -u8 e1000_calculate_checksum(u8 *buffer, u32 length) -{ - u32 i; - u8 sum = 0; - - DEBUGFUNC("e1000_calculate_checksum"); - - if (!buffer) - return 0; - - for (i = 0; i < length; i++) - sum += buffer[i]; - - return (u8) (0 - sum); -} - -/** - * e1000_mng_enable_host_if_generic - Checks host interface is enabled - * @hw: pointer to the HW structure - * - * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND - * - * This function checks whether the HOST IF is enabled for command operation - * and also checks whether the previous command is completed. It busy waits - * in case of previous command is not completed. - **/ -s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw) -{ - u32 hicr; - u8 i; - - DEBUGFUNC("e1000_mng_enable_host_if_generic"); - - if (!hw->mac.arc_subsystem_valid) { - DEBUGOUT("ARC subsystem not valid.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - /* Check that the host interface is enabled. */ - hicr = E1000_READ_REG(hw, E1000_HICR); - if (!(hicr & E1000_HICR_EN)) { - DEBUGOUT("E1000_HOST_EN bit disabled.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - /* check the previous command is completed */ - for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { - hicr = E1000_READ_REG(hw, E1000_HICR); - if (!(hicr & E1000_HICR_C)) - break; - msec_delay_irq(1); - } - - if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { - DEBUGOUT("Previous command timeout failed .\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - return E1000_SUCCESS; -} - -/** - * e1000_check_mng_mode_generic - Generic check management mode - * @hw: pointer to the HW structure - * - * Reads the firmware semaphore register and returns true (>0) if - * manageability is enabled, else false (0). - **/ -bool e1000_check_mng_mode_generic(struct e1000_hw *hw) -{ - u32 fwsm = E1000_READ_REG(hw, E1000_FWSM); - - DEBUGFUNC("e1000_check_mng_mode_generic"); - - - return (fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); -} - -/** - * e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx - * @hw: pointer to the HW structure - * - * Enables packet filtering on transmit packets if manageability is enabled - * and host interface is enabled. - **/ -bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw) -{ - struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; - u32 *buffer = (u32 *)&hw->mng_cookie; - u32 offset; - s32 ret_val, hdr_csum, csum; - u8 i, len; - - DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic"); - - hw->mac.tx_pkt_filtering = true; - - /* No manageability, no filtering */ - if (!hw->mac.ops.check_mng_mode(hw)) { - hw->mac.tx_pkt_filtering = false; - return hw->mac.tx_pkt_filtering; - } - - /* If we can't read from the host interface for whatever - * reason, disable filtering. - */ - ret_val = e1000_mng_enable_host_if_generic(hw); - if (ret_val != E1000_SUCCESS) { - hw->mac.tx_pkt_filtering = false; - return hw->mac.tx_pkt_filtering; - } - - /* Read in the header. Length and offset are in dwords. */ - len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; - offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; - for (i = 0; i < len; i++) - *(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, - offset + i); - hdr_csum = hdr->checksum; - hdr->checksum = 0; - csum = e1000_calculate_checksum((u8 *)hdr, - E1000_MNG_DHCP_COOKIE_LENGTH); - /* If either the checksums or signature don't match, then - * the cookie area isn't considered valid, in which case we - * take the safe route of assuming Tx filtering is enabled. - */ - if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { - hw->mac.tx_pkt_filtering = true; - return hw->mac.tx_pkt_filtering; - } - - /* Cookie area is valid, make the final check for filtering. */ - if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) - hw->mac.tx_pkt_filtering = false; - - return hw->mac.tx_pkt_filtering; -} - -/** - * e1000_mng_write_cmd_header_generic - Writes manageability command header - * @hw: pointer to the HW structure - * @hdr: pointer to the host interface command header - * - * Writes the command header after does the checksum calculation. - **/ -s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr) -{ - u16 i, length = sizeof(struct e1000_host_mng_command_header); - - DEBUGFUNC("e1000_mng_write_cmd_header_generic"); - - /* Write the whole command header structure with new checksum. */ - - hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); - - length >>= 2; - /* Write the relevant command block into the ram area. */ - for (i = 0; i < length; i++) { - E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, - *((u32 *) hdr + i)); - E1000_WRITE_FLUSH(hw); - } - - return E1000_SUCCESS; -} - -/** - * e1000_mng_host_if_write_generic - Write to the manageability host interface - * @hw: pointer to the HW structure - * @buffer: pointer to the host interface buffer - * @length: size of the buffer - * @offset: location in the buffer to write to - * @sum: sum of the data (not checksum) - * - * This function writes the buffer content at the offset given on the host if. - * It also does alignment considerations to do the writes in most efficient - * way. Also fills up the sum of the buffer in *buffer parameter. - **/ -s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, - u16 length, u16 offset, u8 *sum) -{ - u8 *tmp; - u8 *bufptr = buffer; - u32 data = 0; - u16 remaining, i, j, prev_bytes; - - DEBUGFUNC("e1000_mng_host_if_write_generic"); - - /* sum = only sum of the data and it is not checksum */ - - if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) - return -E1000_ERR_PARAM; - - tmp = (u8 *)&data; - prev_bytes = offset & 0x3; - offset >>= 2; - - if (prev_bytes) { - data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset); - for (j = prev_bytes; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data); - length -= j - prev_bytes; - offset++; - } - - remaining = length & 0x3; - length -= remaining; - - /* Calculate length in DWORDs */ - length >>= 2; - - /* The device driver writes the relevant command block into the - * ram area. - */ - for (i = 0; i < length; i++) { - for (j = 0; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - - E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, - data); - } - if (remaining) { - for (j = 0; j < sizeof(u32); j++) { - if (j < remaining) - *(tmp + j) = *bufptr++; - else - *(tmp + j) = 0; - - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, - data); - } - - return E1000_SUCCESS; -} - -/** - * e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface - * @hw: pointer to the HW structure - * @buffer: pointer to the host interface - * @length: size of the buffer - * - * Writes the DHCP information to the host interface. - **/ -s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer, - u16 length) -{ - struct e1000_host_mng_command_header hdr; - s32 ret_val; - u32 hicr; - - DEBUGFUNC("e1000_mng_write_dhcp_info_generic"); - - hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; - hdr.command_length = length; - hdr.reserved1 = 0; - hdr.reserved2 = 0; - hdr.checksum = 0; - - /* Enable the host interface */ - ret_val = e1000_mng_enable_host_if_generic(hw); - if (ret_val) - return ret_val; - - /* Populate the host interface with the contents of "buffer". */ - ret_val = e1000_mng_host_if_write_generic(hw, buffer, length, - sizeof(hdr), &(hdr.checksum)); - if (ret_val) - return ret_val; - - /* Write the manageability command header */ - ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr); - if (ret_val) - return ret_val; - - /* Tell the ARC a new command is pending. */ - hicr = E1000_READ_REG(hw, E1000_HICR); - E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); - - return E1000_SUCCESS; -} - -/** - * e1000_enable_mng_pass_thru - Check if management passthrough is needed - * @hw: pointer to the HW structure - * - * Verifies the hardware needs to leave interface enabled so that frames can - * be directed to and from the management interface. - **/ -bool e1000_enable_mng_pass_thru(struct e1000_hw *hw) -{ - u32 manc; - u32 fwsm, factps; - - DEBUGFUNC("e1000_enable_mng_pass_thru"); - - if (!hw->mac.asf_firmware_present) - return false; - - manc = E1000_READ_REG(hw, E1000_MANC); - - if (!(manc & E1000_MANC_RCV_TCO_EN)) - return false; - - if (hw->mac.has_fwsm) { - fwsm = E1000_READ_REG(hw, E1000_FWSM); - factps = E1000_READ_REG(hw, E1000_FACTPS); - - if (!(factps & E1000_FACTPS_MNGCG) && - ((fwsm & E1000_FWSM_MODE_MASK) == - (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) - return true; - } else if ((manc & E1000_MANC_SMBUS_EN) && - !(manc & E1000_MANC_ASF_EN)) { - return true; - } - - return false; -} - -/** - * e1000_host_interface_command - Writes buffer to host interface - * @hw: pointer to the HW structure - * @buffer: contains a command to write - * @length: the byte length of the buffer, must be multiple of 4 bytes - * - * Writes a buffer to the Host Interface. Upon success, returns E1000_SUCCESS - * else returns E1000_ERR_HOST_INTERFACE_COMMAND. - **/ -s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length) -{ - u32 hicr, i; - - DEBUGFUNC("e1000_host_interface_command"); - - if (!(hw->mac.arc_subsystem_valid)) { - DEBUGOUT("Hardware doesn't support host interface command.\n"); - return E1000_SUCCESS; - } - - if (!hw->mac.asf_firmware_present) { - DEBUGOUT("Firmware is not present.\n"); - return E1000_SUCCESS; - } - - if (length == 0 || length & 0x3 || - length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) { - DEBUGOUT("Buffer length failure.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - /* Check that the host interface is enabled. */ - hicr = E1000_READ_REG(hw, E1000_HICR); - if (!(hicr & E1000_HICR_EN)) { - DEBUGOUT("E1000_HOST_EN bit disabled.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - /* Calculate length in DWORDs */ - length >>= 2; - - /* The device driver writes the relevant command block - * into the ram area. - */ - for (i = 0; i < length; i++) - E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, - *((u32 *)buffer + i)); - - /* Setting this bit tells the ARC that a new command is pending. */ - E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); - - for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { - hicr = E1000_READ_REG(hw, E1000_HICR); - if (!(hicr & E1000_HICR_C)) - break; - msec_delay(1); - } - - /* Check command successful completion. */ - if (i == E1000_HI_COMMAND_TIMEOUT || - (!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) { - DEBUGOUT("Command has failed with no status valid.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - for (i = 0; i < length; i++) - *((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, - E1000_HOST_IF, - i); - - return E1000_SUCCESS; -} -/** - * e1000_load_firmware - Writes proxy FW code buffer to host interface - * and execute. - * @hw: pointer to the HW structure - * @buffer: contains a firmware to write - * @length: the byte length of the buffer, must be multiple of 4 bytes - * - * Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled - * in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND. - **/ -s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length) -{ - u32 hicr, hibba, fwsm, icr, i; - - DEBUGFUNC("e1000_load_firmware"); - - if (hw->mac.type < e1000_i210) { - DEBUGOUT("Hardware doesn't support loading FW by the driver\n"); - return -E1000_ERR_CONFIG; - } - - /* Check that the host interface is enabled. */ - hicr = E1000_READ_REG(hw, E1000_HICR); - if (!(hicr & E1000_HICR_EN)) { - DEBUGOUT("E1000_HOST_EN bit disabled.\n"); - return -E1000_ERR_CONFIG; - } - if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) { - DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n"); - return -E1000_ERR_CONFIG; - } - - if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) { - DEBUGOUT("Buffer length failure.\n"); - return -E1000_ERR_INVALID_ARGUMENT; - } - - /* Clear notification from ROM-FW by reading ICR register */ - icr = E1000_READ_REG(hw, E1000_ICR_V2); - - /* Reset ROM-FW */ - hicr = E1000_READ_REG(hw, E1000_HICR); - hicr |= E1000_HICR_FW_RESET_ENABLE; - E1000_WRITE_REG(hw, E1000_HICR, hicr); - hicr |= E1000_HICR_FW_RESET; - E1000_WRITE_REG(hw, E1000_HICR, hicr); - E1000_WRITE_FLUSH(hw); - - /* Wait till MAC notifies about its readiness after ROM-FW reset */ - for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) { - icr = E1000_READ_REG(hw, E1000_ICR_V2); - if (icr & E1000_ICR_MNG) - break; - msec_delay(1); - } - - /* Check for timeout */ - if (i == E1000_HI_COMMAND_TIMEOUT) { - DEBUGOUT("FW reset failed.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - /* Wait till MAC is ready to accept new FW code */ - for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { - fwsm = E1000_READ_REG(hw, E1000_FWSM); - if ((fwsm & E1000_FWSM_FW_VALID) && - ((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT == - E1000_FWSM_HI_EN_ONLY_MODE)) - break; - msec_delay(1); - } - - /* Check for timeout */ - if (i == E1000_HI_COMMAND_TIMEOUT) { - DEBUGOUT("FW reset failed.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - /* Calculate length in DWORDs */ - length >>= 2; - - /* The device driver writes the relevant FW code block - * into the ram area in DWORDs via 1kB ram addressing window. - */ - for (i = 0; i < length; i++) { - if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) { - /* Point to correct 1kB ram window */ - hibba = E1000_HI_FW_BASE_ADDRESS + - ((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) * - (i / E1000_HI_FW_BLOCK_DWORD_LENGTH)); - - E1000_WRITE_REG(hw, E1000_HIBBA, hibba); - } - - E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, - i % E1000_HI_FW_BLOCK_DWORD_LENGTH, - *((u32 *)buffer + i)); - } - - /* Setting this bit tells the ARC that a new FW is ready to execute. */ - hicr = E1000_READ_REG(hw, E1000_HICR); - E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); - - for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { - hicr = E1000_READ_REG(hw, E1000_HICR); - if (!(hicr & E1000_HICR_C)) - break; - msec_delay(1); - } - - /* Check for successful FW start. */ - if (i == E1000_HI_COMMAND_TIMEOUT) { - DEBUGOUT("New FW did not start within timeout period.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - return E1000_SUCCESS; -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.h b/kernel/linux/kni/ethtool/igb/e1000_manage.h deleted file mode 100644 index 9f27b93436..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_manage.h +++ /dev/null @@ -1,74 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_MANAGE_H_ -#define _E1000_MANAGE_H_ - -bool e1000_check_mng_mode_generic(struct e1000_hw *hw); -bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw); -s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw); -s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, - u16 length, u16 offset, u8 *sum); -s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr); -s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, - u8 *buffer, u16 length); -bool e1000_enable_mng_pass_thru(struct e1000_hw *hw); -u8 e1000_calculate_checksum(u8 *buffer, u32 length); -s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length); -s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length); - -enum e1000_mng_mode { - e1000_mng_mode_none = 0, - e1000_mng_mode_asf, - e1000_mng_mode_pt, - e1000_mng_mode_ipmi, - e1000_mng_mode_host_if_only -}; - -#define E1000_FACTPS_MNGCG 0x20000000 - -#define E1000_FWSM_MODE_MASK 0xE -#define E1000_FWSM_MODE_SHIFT 1 -#define E1000_FWSM_FW_VALID 0x00008000 -#define E1000_FWSM_HI_EN_ONLY_MODE 0x4 - -#define E1000_MNG_IAMT_MODE 0x3 -#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 -#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 -#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 -#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 -#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 -#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 - -#define E1000_VFTA_ENTRY_SHIFT 5 -#define E1000_VFTA_ENTRY_MASK 0x7F -#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F - -#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ -#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ -#define E1000_HI_COMMAND_TIMEOUT 500 /* Process HI cmd limit */ -#define E1000_HI_FW_BASE_ADDRESS 0x10000 -#define E1000_HI_FW_MAX_LENGTH (64 * 1024) /* Num of bytes */ -#define E1000_HI_FW_BLOCK_DWORD_LENGTH 256 /* Num of DWORDs per page */ -#define E1000_HICR_MEMORY_BASE_EN 0x200 /* MB Enable bit - RO */ -#define E1000_HICR_EN 0x01 /* Enable bit - RO */ -/* Driver sets this bit when done to put command in RAM */ -#define E1000_HICR_C 0x02 -#define E1000_HICR_SV 0x04 /* Status Validity */ -#define E1000_HICR_FW_RESET_ENABLE 0x40 -#define E1000_HICR_FW_RESET 0x80 - -/* Intel(R) Active Management Technology signature */ -#define E1000_IAMT_SIGNATURE 0x544D4149 - -#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.c b/kernel/linux/kni/ethtool/igb/e1000_mbx.c deleted file mode 100644 index 1be4434917..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_mbx.c +++ /dev/null @@ -1,510 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000_mbx.h" - -/** - * e1000_null_mbx_check_for_flag - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -static s32 e1000_null_mbx_check_for_flag(struct e1000_hw E1000_UNUSEDARG *hw, - u16 E1000_UNUSEDARG mbx_id) -{ - DEBUGFUNC("e1000_null_mbx_check_flag"); - - return E1000_SUCCESS; -} - -/** - * e1000_null_mbx_transact - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -static s32 e1000_null_mbx_transact(struct e1000_hw E1000_UNUSEDARG *hw, - u32 E1000_UNUSEDARG *msg, - u16 E1000_UNUSEDARG size, - u16 E1000_UNUSEDARG mbx_id) -{ - DEBUGFUNC("e1000_null_mbx_rw_msg"); - - return E1000_SUCCESS; -} - -/** - * e1000_read_mbx - Reads a message from the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to read - * - * returns SUCCESS if it successfully read message from buffer - **/ -s32 e1000_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_read_mbx"); - - /* limit read to size of mailbox */ - if (size > mbx->size) - size = mbx->size; - - if (mbx->ops.read) - ret_val = mbx->ops.read(hw, msg, size, mbx_id); - - return ret_val; -} - -/** - * e1000_write_mbx - Write a message to the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to write - * - * returns SUCCESS if it successfully copied message into the buffer - **/ -s32 e1000_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_write_mbx"); - - if (size > mbx->size) - ret_val = -E1000_ERR_MBX; - - else if (mbx->ops.write) - ret_val = mbx->ops.write(hw, msg, size, mbx_id); - - return ret_val; -} - -/** - * e1000_check_for_msg - checks to see if someone sent us mail - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check - * - * returns SUCCESS if the Status bit was found or else ERR_MBX - **/ -s32 e1000_check_for_msg(struct e1000_hw *hw, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_check_for_msg"); - - if (mbx->ops.check_for_msg) - ret_val = mbx->ops.check_for_msg(hw, mbx_id); - - return ret_val; -} - -/** - * e1000_check_for_ack - checks to see if someone sent us ACK - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check - * - * returns SUCCESS if the Status bit was found or else ERR_MBX - **/ -s32 e1000_check_for_ack(struct e1000_hw *hw, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_check_for_ack"); - - if (mbx->ops.check_for_ack) - ret_val = mbx->ops.check_for_ack(hw, mbx_id); - - return ret_val; -} - -/** - * e1000_check_for_rst - checks to see if other side has reset - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to check - * - * returns SUCCESS if the Status bit was found or else ERR_MBX - **/ -s32 e1000_check_for_rst(struct e1000_hw *hw, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_check_for_rst"); - - if (mbx->ops.check_for_rst) - ret_val = mbx->ops.check_for_rst(hw, mbx_id); - - return ret_val; -} - -/** - * e1000_poll_for_msg - Wait for message notification - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to write - * - * returns SUCCESS if it successfully received a message notification - **/ -static s32 e1000_poll_for_msg(struct e1000_hw *hw, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - int countdown = mbx->timeout; - - DEBUGFUNC("e1000_poll_for_msg"); - - if (!countdown || !mbx->ops.check_for_msg) - goto out; - - while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) { - countdown--; - if (!countdown) - break; - usec_delay(mbx->usec_delay); - } - - /* if we failed, all future posted messages fail until reset */ - if (!countdown) - mbx->timeout = 0; -out: - return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; -} - -/** - * e1000_poll_for_ack - Wait for message acknowledgement - * @hw: pointer to the HW structure - * @mbx_id: id of mailbox to write - * - * returns SUCCESS if it successfully received a message acknowledgement - **/ -static s32 e1000_poll_for_ack(struct e1000_hw *hw, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - int countdown = mbx->timeout; - - DEBUGFUNC("e1000_poll_for_ack"); - - if (!countdown || !mbx->ops.check_for_ack) - goto out; - - while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) { - countdown--; - if (!countdown) - break; - usec_delay(mbx->usec_delay); - } - - /* if we failed, all future posted messages fail until reset */ - if (!countdown) - mbx->timeout = 0; -out: - return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; -} - -/** - * e1000_read_posted_mbx - Wait for message notification and receive message - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to write - * - * returns SUCCESS if it successfully received a message notification and - * copied it into the receive buffer. - **/ -s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_read_posted_mbx"); - - if (!mbx->ops.read) - goto out; - - ret_val = e1000_poll_for_msg(hw, mbx_id); - - /* if ack received read message, otherwise we timed out */ - if (!ret_val) - ret_val = mbx->ops.read(hw, msg, size, mbx_id); -out: - return ret_val; -} - -/** - * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @mbx_id: id of mailbox to write - * - * returns SUCCESS if it successfully copied message into the buffer and - * received an ack to that message within delay * timeout period - **/ -s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_write_posted_mbx"); - - /* exit if either we can't write or there isn't a defined timeout */ - if (!mbx->ops.write || !mbx->timeout) - goto out; - - /* send msg */ - ret_val = mbx->ops.write(hw, msg, size, mbx_id); - - /* if msg sent wait until we receive an ack */ - if (!ret_val) - ret_val = e1000_poll_for_ack(hw, mbx_id); -out: - return ret_val; -} - -/** - * e1000_init_mbx_ops_generic - Initialize mbx function pointers - * @hw: pointer to the HW structure - * - * Sets the function pointers to no-op functions - **/ -void e1000_init_mbx_ops_generic(struct e1000_hw *hw) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - mbx->ops.init_params = e1000_null_ops_generic; - mbx->ops.read = e1000_null_mbx_transact; - mbx->ops.write = e1000_null_mbx_transact; - mbx->ops.check_for_msg = e1000_null_mbx_check_for_flag; - mbx->ops.check_for_ack = e1000_null_mbx_check_for_flag; - mbx->ops.check_for_rst = e1000_null_mbx_check_for_flag; - mbx->ops.read_posted = e1000_read_posted_mbx; - mbx->ops.write_posted = e1000_write_posted_mbx; -} - -static s32 e1000_check_for_bit_pf(struct e1000_hw *hw, u32 mask) -{ - u32 mbvficr = E1000_READ_REG(hw, E1000_MBVFICR); - s32 ret_val = -E1000_ERR_MBX; - - if (mbvficr & mask) { - ret_val = E1000_SUCCESS; - E1000_WRITE_REG(hw, E1000_MBVFICR, mask); - } - - return ret_val; -} - -/** - * e1000_check_for_msg_pf - checks to see if the VF has sent mail - * @hw: pointer to the HW structure - * @vf_number: the VF index - * - * returns SUCCESS if the VF has set the Status bit or else ERR_MBX - **/ -static s32 e1000_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number) -{ - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_check_for_msg_pf"); - - if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) { - ret_val = E1000_SUCCESS; - hw->mbx.stats.reqs++; - } - - return ret_val; -} - -/** - * e1000_check_for_ack_pf - checks to see if the VF has ACKed - * @hw: pointer to the HW structure - * @vf_number: the VF index - * - * returns SUCCESS if the VF has set the Status bit or else ERR_MBX - **/ -static s32 e1000_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number) -{ - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_check_for_ack_pf"); - - if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) { - ret_val = E1000_SUCCESS; - hw->mbx.stats.acks++; - } - - return ret_val; -} - -/** - * e1000_check_for_rst_pf - checks to see if the VF has reset - * @hw: pointer to the HW structure - * @vf_number: the VF index - * - * returns SUCCESS if the VF has set the Status bit or else ERR_MBX - **/ -static s32 e1000_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number) -{ - u32 vflre = E1000_READ_REG(hw, E1000_VFLRE); - s32 ret_val = -E1000_ERR_MBX; - - DEBUGFUNC("e1000_check_for_rst_pf"); - - if (vflre & (1 << vf_number)) { - ret_val = E1000_SUCCESS; - E1000_WRITE_REG(hw, E1000_VFLRE, (1 << vf_number)); - hw->mbx.stats.rsts++; - } - - return ret_val; -} - -/** - * e1000_obtain_mbx_lock_pf - obtain mailbox lock - * @hw: pointer to the HW structure - * @vf_number: the VF index - * - * return SUCCESS if we obtained the mailbox lock - **/ -static s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) -{ - s32 ret_val = -E1000_ERR_MBX; - u32 p2v_mailbox; - - DEBUGFUNC("e1000_obtain_mbx_lock_pf"); - - /* Take ownership of the buffer */ - E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); - - /* reserve mailbox for vf use */ - p2v_mailbox = E1000_READ_REG(hw, E1000_P2VMAILBOX(vf_number)); - if (p2v_mailbox & E1000_P2VMAILBOX_PFU) - ret_val = E1000_SUCCESS; - - return ret_val; -} - -/** - * e1000_write_mbx_pf - Places a message in the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @vf_number: the VF index - * - * returns SUCCESS if it successfully copied message into the buffer - **/ -static s32 e1000_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 vf_number) -{ - s32 ret_val; - u16 i; - - DEBUGFUNC("e1000_write_mbx_pf"); - - /* lock the mailbox to prevent pf/vf race condition */ - ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); - if (ret_val) - goto out_no_write; - - /* flush msg and acks as we are overwriting the message buffer */ - e1000_check_for_msg_pf(hw, vf_number); - e1000_check_for_ack_pf(hw, vf_number); - - /* copy the caller specified message to the mailbox memory buffer */ - for (i = 0; i < size; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i, msg[i]); - - /* Interrupt VF to tell it a message has been sent and release buffer*/ - E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS); - - /* update stats */ - hw->mbx.stats.msgs_tx++; - -out_no_write: - return ret_val; - -} - -/** - * e1000_read_mbx_pf - Read a message from the mailbox - * @hw: pointer to the HW structure - * @msg: The message buffer - * @size: Length of buffer - * @vf_number: the VF index - * - * This function copies a message from the mailbox buffer to the caller's - * memory buffer. The presumption is that the caller knows that there was - * a message due to a VF request so no polling for message is needed. - **/ -static s32 e1000_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 vf_number) -{ - s32 ret_val; - u16 i; - - DEBUGFUNC("e1000_read_mbx_pf"); - - /* lock the mailbox to prevent pf/vf race condition */ - ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); - if (ret_val) - goto out_no_read; - - /* copy the message to the mailbox memory buffer */ - for (i = 0; i < size; i++) - msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i); - - /* Acknowledge the message and release buffer */ - E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK); - - /* update stats */ - hw->mbx.stats.msgs_rx++; - -out_no_read: - return ret_val; -} - -/** - * e1000_init_mbx_params_pf - set initial values for pf mailbox - * @hw: pointer to the HW structure - * - * Initializes the hw->mbx struct to correct values for pf mailbox - */ -s32 e1000_init_mbx_params_pf(struct e1000_hw *hw) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - - switch (hw->mac.type) { - case e1000_82576: - case e1000_i350: - case e1000_i354: - mbx->timeout = 0; - mbx->usec_delay = 0; - - mbx->size = E1000_VFMAILBOX_SIZE; - - mbx->ops.read = e1000_read_mbx_pf; - mbx->ops.write = e1000_write_mbx_pf; - mbx->ops.read_posted = e1000_read_posted_mbx; - mbx->ops.write_posted = e1000_write_posted_mbx; - mbx->ops.check_for_msg = e1000_check_for_msg_pf; - mbx->ops.check_for_ack = e1000_check_for_ack_pf; - mbx->ops.check_for_rst = e1000_check_for_rst_pf; - - mbx->stats.msgs_tx = 0; - mbx->stats.msgs_rx = 0; - mbx->stats.reqs = 0; - mbx->stats.acks = 0; - mbx->stats.rsts = 0; - default: - return E1000_SUCCESS; - } -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.h b/kernel/linux/kni/ethtool/igb/e1000_mbx.h deleted file mode 100644 index 5951f18fbc..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_mbx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_MBX_H_ -#define _E1000_MBX_H_ - -#include "e1000_api.h" - -#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ -#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ -#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ -#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ -#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ - -#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */ -#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ -#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */ -#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ - -#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ - -/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the - * PF. The reverse is true if it is E1000_PF_*. - * Message ACK's are the value or'd with 0xF0000000 - */ -/* Msgs below or'd with this are the ACK */ -#define E1000_VT_MSGTYPE_ACK 0x80000000 -/* Msgs below or'd with this are the NACK */ -#define E1000_VT_MSGTYPE_NACK 0x40000000 -/* Indicates that VF is still clear to send requests */ -#define E1000_VT_MSGTYPE_CTS 0x20000000 -#define E1000_VT_MSGINFO_SHIFT 16 -/* bits 23:16 are used for extra info for certain messages */ -#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) - -#define E1000_VF_RESET 0x01 /* VF requests reset */ -#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ -#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ -#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ -#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_SET_LPE 0x05 /* reqs to set VMOLR.LPE */ -#define E1000_VF_SET_PROMISC 0x06 /* reqs to clear VMOLR.ROPE/MPME*/ -#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) - -#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ - -#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ -#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ - -s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 e1000_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 e1000_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 e1000_check_for_msg(struct e1000_hw *, u16); -s32 e1000_check_for_ack(struct e1000_hw *, u16); -s32 e1000_check_for_rst(struct e1000_hw *, u16); -void e1000_init_mbx_ops_generic(struct e1000_hw *hw); -s32 e1000_init_mbx_params_pf(struct e1000_hw *); - -#endif /* _E1000_MBX_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.c b/kernel/linux/kni/ethtool/igb/e1000_nvm.c deleted file mode 100644 index 78c3fc0edc..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_nvm.c +++ /dev/null @@ -1,950 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000_api.h" - -static void e1000_reload_nvm_generic(struct e1000_hw *hw); - -/** - * e1000_init_nvm_ops_generic - Initialize NVM function pointers - * @hw: pointer to the HW structure - * - * Setups up the function pointers to no-op functions - **/ -void e1000_init_nvm_ops_generic(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - DEBUGFUNC("e1000_init_nvm_ops_generic"); - - /* Initialize function pointers */ - nvm->ops.init_params = e1000_null_ops_generic; - nvm->ops.acquire = e1000_null_ops_generic; - nvm->ops.read = e1000_null_read_nvm; - nvm->ops.release = e1000_null_nvm_generic; - nvm->ops.reload = e1000_reload_nvm_generic; - nvm->ops.update = e1000_null_ops_generic; - nvm->ops.valid_led_default = e1000_null_led_default; - nvm->ops.validate = e1000_null_ops_generic; - nvm->ops.write = e1000_null_write_nvm; -} - -/** - * e1000_null_nvm_read - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw, - u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, - u16 E1000_UNUSEDARG *c) -{ - DEBUGFUNC("e1000_null_read_nvm"); - return E1000_SUCCESS; -} - -/** - * e1000_null_nvm_generic - No-op function, return void - * @hw: pointer to the HW structure - **/ -void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw) -{ - DEBUGFUNC("e1000_null_nvm_generic"); - return; -} - -/** - * e1000_null_led_default - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw, - u16 E1000_UNUSEDARG *data) -{ - DEBUGFUNC("e1000_null_led_default"); - return E1000_SUCCESS; -} - -/** - * e1000_null_write_nvm - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw, - u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, - u16 E1000_UNUSEDARG *c) -{ - DEBUGFUNC("e1000_null_write_nvm"); - return E1000_SUCCESS; -} - -/** - * e1000_raise_eec_clk - Raise EEPROM clock - * @hw: pointer to the HW structure - * @eecd: pointer to the EEPROM - * - * Enable/Raise the EEPROM clock bit. - **/ -static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) -{ - *eecd = *eecd | E1000_EECD_SK; - E1000_WRITE_REG(hw, E1000_EECD, *eecd); - E1000_WRITE_FLUSH(hw); - usec_delay(hw->nvm.delay_usec); -} - -/** - * e1000_lower_eec_clk - Lower EEPROM clock - * @hw: pointer to the HW structure - * @eecd: pointer to the EEPROM - * - * Clear/Lower the EEPROM clock bit. - **/ -static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) -{ - *eecd = *eecd & ~E1000_EECD_SK; - E1000_WRITE_REG(hw, E1000_EECD, *eecd); - E1000_WRITE_FLUSH(hw); - usec_delay(hw->nvm.delay_usec); -} - -/** - * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM - * @hw: pointer to the HW structure - * @data: data to send to the EEPROM - * @count: number of bits to shift out - * - * We need to shift 'count' bits out to the EEPROM. So, the value in the - * "data" parameter will be shifted out to the EEPROM one bit at a time. - * In order to do this, "data" must be broken down into bits. - **/ -static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - u32 mask; - - DEBUGFUNC("e1000_shift_out_eec_bits"); - - mask = 0x01 << (count - 1); - if (nvm->type == e1000_nvm_eeprom_spi) - eecd |= E1000_EECD_DO; - - do { - eecd &= ~E1000_EECD_DI; - - if (data & mask) - eecd |= E1000_EECD_DI; - - E1000_WRITE_REG(hw, E1000_EECD, eecd); - E1000_WRITE_FLUSH(hw); - - usec_delay(nvm->delay_usec); - - e1000_raise_eec_clk(hw, &eecd); - e1000_lower_eec_clk(hw, &eecd); - - mask >>= 1; - } while (mask); - - eecd &= ~E1000_EECD_DI; - E1000_WRITE_REG(hw, E1000_EECD, eecd); -} - -/** - * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM - * @hw: pointer to the HW structure - * @count: number of bits to shift in - * - * In order to read a register from the EEPROM, we need to shift 'count' bits - * in from the EEPROM. Bits are "shifted in" by raising the clock input to - * the EEPROM (setting the SK bit), and then reading the value of the data out - * "DO" bit. During this "shifting in" process the data in "DI" bit should - * always be clear. - **/ -static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) -{ - u32 eecd; - u32 i; - u16 data; - - DEBUGFUNC("e1000_shift_in_eec_bits"); - - eecd = E1000_READ_REG(hw, E1000_EECD); - - eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); - data = 0; - - for (i = 0; i < count; i++) { - data <<= 1; - e1000_raise_eec_clk(hw, &eecd); - - eecd = E1000_READ_REG(hw, E1000_EECD); - - eecd &= ~E1000_EECD_DI; - if (eecd & E1000_EECD_DO) - data |= 1; - - e1000_lower_eec_clk(hw, &eecd); - } - - return data; -} - -/** - * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion - * @hw: pointer to the HW structure - * @ee_reg: EEPROM flag for polling - * - * Polls the EEPROM status bit for either read or write completion based - * upon the value of 'ee_reg'. - **/ -s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) -{ - u32 attempts = 100000; - u32 i, reg = 0; - - DEBUGFUNC("e1000_poll_eerd_eewr_done"); - - for (i = 0; i < attempts; i++) { - if (ee_reg == E1000_NVM_POLL_READ) - reg = E1000_READ_REG(hw, E1000_EERD); - else - reg = E1000_READ_REG(hw, E1000_EEWR); - - if (reg & E1000_NVM_RW_REG_DONE) - return E1000_SUCCESS; - - usec_delay(5); - } - - return -E1000_ERR_NVM; -} - -/** - * e1000_acquire_nvm_generic - Generic request for access to EEPROM - * @hw: pointer to the HW structure - * - * Set the EEPROM access request bit and wait for EEPROM access grant bit. - * Return successful if access grant bit set, else clear the request for - * EEPROM access and return -E1000_ERR_NVM (-1). - **/ -s32 e1000_acquire_nvm_generic(struct e1000_hw *hw) -{ - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - s32 timeout = E1000_NVM_GRANT_ATTEMPTS; - - DEBUGFUNC("e1000_acquire_nvm_generic"); - - E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ); - eecd = E1000_READ_REG(hw, E1000_EECD); - - while (timeout) { - if (eecd & E1000_EECD_GNT) - break; - usec_delay(5); - eecd = E1000_READ_REG(hw, E1000_EECD); - timeout--; - } - - if (!timeout) { - eecd &= ~E1000_EECD_REQ; - E1000_WRITE_REG(hw, E1000_EECD, eecd); - DEBUGOUT("Could not acquire NVM grant\n"); - return -E1000_ERR_NVM; - } - - return E1000_SUCCESS; -} - -/** - * e1000_standby_nvm - Return EEPROM to standby state - * @hw: pointer to the HW structure - * - * Return the EEPROM to a standby state. - **/ -static void e1000_standby_nvm(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - - DEBUGFUNC("e1000_standby_nvm"); - - if (nvm->type == e1000_nvm_eeprom_spi) { - /* Toggle CS to flush commands */ - eecd |= E1000_EECD_CS; - E1000_WRITE_REG(hw, E1000_EECD, eecd); - E1000_WRITE_FLUSH(hw); - usec_delay(nvm->delay_usec); - eecd &= ~E1000_EECD_CS; - E1000_WRITE_REG(hw, E1000_EECD, eecd); - E1000_WRITE_FLUSH(hw); - usec_delay(nvm->delay_usec); - } -} - -/** - * e1000_stop_nvm - Terminate EEPROM command - * @hw: pointer to the HW structure - * - * Terminates the current command by inverting the EEPROM's chip select pin. - **/ -static void e1000_stop_nvm(struct e1000_hw *hw) -{ - u32 eecd; - - DEBUGFUNC("e1000_stop_nvm"); - - eecd = E1000_READ_REG(hw, E1000_EECD); - if (hw->nvm.type == e1000_nvm_eeprom_spi) { - /* Pull CS high */ - eecd |= E1000_EECD_CS; - e1000_lower_eec_clk(hw, &eecd); - } -} - -/** - * e1000_release_nvm_generic - Release exclusive access to EEPROM - * @hw: pointer to the HW structure - * - * Stop any current commands to the EEPROM and clear the EEPROM request bit. - **/ -void e1000_release_nvm_generic(struct e1000_hw *hw) -{ - u32 eecd; - - DEBUGFUNC("e1000_release_nvm_generic"); - - e1000_stop_nvm(hw); - - eecd = E1000_READ_REG(hw, E1000_EECD); - eecd &= ~E1000_EECD_REQ; - E1000_WRITE_REG(hw, E1000_EECD, eecd); -} - -/** - * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write - * @hw: pointer to the HW structure - * - * Setups the EEPROM for reading and writing. - **/ -static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - u8 spi_stat_reg; - - DEBUGFUNC("e1000_ready_nvm_eeprom"); - - if (nvm->type == e1000_nvm_eeprom_spi) { - u16 timeout = NVM_MAX_RETRY_SPI; - - /* Clear SK and CS */ - eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - E1000_WRITE_REG(hw, E1000_EECD, eecd); - E1000_WRITE_FLUSH(hw); - usec_delay(1); - - /* Read "Status Register" repeatedly until the LSB is cleared. - * The EEPROM will signal that the command has been completed - * by clearing bit 0 of the internal status register. If it's - * not cleared within 'timeout', then error out. - */ - while (timeout) { - e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, - hw->nvm.opcode_bits); - spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); - if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) - break; - - usec_delay(5); - e1000_standby_nvm(hw); - timeout--; - } - - if (!timeout) { - DEBUGOUT("SPI NVM Status error\n"); - return -E1000_ERR_NVM; - } - } - - return E1000_SUCCESS; -} - -/** - * e1000_read_nvm_spi - Read EEPROM's using SPI - * @hw: pointer to the HW structure - * @offset: offset of word in the EEPROM to read - * @words: number of words to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM. - **/ -s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 i = 0; - s32 ret_val; - u16 word_in; - u8 read_opcode = NVM_READ_OPCODE_SPI; - - DEBUGFUNC("e1000_read_nvm_spi"); - - /* A check for invalid values: offset too large, too many words, - * and not enough words. - */ - if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || - (words == 0)) { - DEBUGOUT("nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; - } - - ret_val = nvm->ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = e1000_ready_nvm_eeprom(hw); - if (ret_val) - goto release; - - e1000_standby_nvm(hw); - - if ((nvm->address_bits == 8) && (offset >= 128)) - read_opcode |= NVM_A8_OPCODE_SPI; - - /* Send the READ command (opcode + addr) */ - e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); - e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); - - /* Read the data. SPI NVMs increment the address with each byte - * read and will roll over if reading beyond the end. This allows - * us to read the whole NVM from any offset - */ - for (i = 0; i < words; i++) { - word_in = e1000_shift_in_eec_bits(hw, 16); - data[i] = (word_in >> 8) | (word_in << 8); - } - -release: - nvm->ops.release(hw); - - return ret_val; -} - -/** - * e1000_read_nvm_eerd - Reads EEPROM using EERD register - * @hw: pointer to the HW structure - * @offset: offset of word in the EEPROM to read - * @words: number of words to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM using the EERD register. - **/ -s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 i, eerd = 0; - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_read_nvm_eerd"); - - /* A check for invalid values: offset too large, too many words, - * too many words for the offset, and not enough words. - */ - if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || - (words == 0)) { - DEBUGOUT("nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; - } - - for (i = 0; i < words; i++) { - eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + - E1000_NVM_RW_REG_START; - - E1000_WRITE_REG(hw, E1000_EERD, eerd); - ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); - if (ret_val) - break; - - data[i] = (E1000_READ_REG(hw, E1000_EERD) >> - E1000_NVM_RW_REG_DATA); - } - - return ret_val; -} - -/** - * e1000_write_nvm_spi - Write to EEPROM using SPI - * @hw: pointer to the HW structure - * @offset: offset within the EEPROM to be written to - * @words: number of words to write - * @data: 16 bit word(s) to be written to the EEPROM - * - * Writes data to EEPROM at offset using SPI interface. - * - * If e1000_update_nvm_checksum is not called after this function , the - * EEPROM will most likely contain an invalid checksum. - **/ -s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - s32 ret_val = -E1000_ERR_NVM; - u16 widx = 0; - - DEBUGFUNC("e1000_write_nvm_spi"); - - /* A check for invalid values: offset too large, too many words, - * and not enough words. - */ - if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || - (words == 0)) { - DEBUGOUT("nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; - } - - while (widx < words) { - u8 write_opcode = NVM_WRITE_OPCODE_SPI; - - ret_val = nvm->ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = e1000_ready_nvm_eeprom(hw); - if (ret_val) { - nvm->ops.release(hw); - return ret_val; - } - - e1000_standby_nvm(hw); - - /* Send the WRITE ENABLE command (8 bit opcode) */ - e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, - nvm->opcode_bits); - - e1000_standby_nvm(hw); - - /* Some SPI eeproms use the 8th address bit embedded in the - * opcode - */ - if ((nvm->address_bits == 8) && (offset >= 128)) - write_opcode |= NVM_A8_OPCODE_SPI; - - /* Send the Write command (8-bit opcode + addr) */ - e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); - e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), - nvm->address_bits); - - /* Loop to allow for up to whole page write of eeprom */ - while (widx < words) { - u16 word_out = data[widx]; - word_out = (word_out >> 8) | (word_out << 8); - e1000_shift_out_eec_bits(hw, word_out, 16); - widx++; - - if ((((offset + widx) * 2) % nvm->page_size) == 0) { - e1000_standby_nvm(hw); - break; - } - } - msec_delay(10); - nvm->ops.release(hw); - } - - return ret_val; -} - -/** - * e1000_read_pba_string_generic - Read device part number - * @hw: pointer to the HW structure - * @pba_num: pointer to device part number - * @pba_num_size: size of part number buffer - * - * Reads the product board assembly (PBA) number from the EEPROM and stores - * the value in pba_num. - **/ -s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, - u32 pba_num_size) -{ - s32 ret_val; - u16 nvm_data; - u16 pba_ptr; - u16 offset; - u16 length; - - DEBUGFUNC("e1000_read_pba_string_generic"); - - if (pba_num == NULL) { - DEBUGOUT("PBA string buffer was null\n"); - return -E1000_ERR_INVALID_ARGUMENT; - } - - ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - /* if nvm_data is not ptr guard the PBA must be in legacy format which - * means pba_ptr is actually our second data word for the PBA number - * and we can decode it into an ascii string - */ - if (nvm_data != NVM_PBA_PTR_GUARD) { - DEBUGOUT("NVM PBA number is not stored as string\n"); - - /* make sure callers buffer is big enough to store the PBA */ - if (pba_num_size < E1000_PBANUM_LENGTH) { - DEBUGOUT("PBA string buffer too small\n"); - return E1000_ERR_NO_SPACE; - } - - /* extract hex string from data and pba_ptr */ - pba_num[0] = (nvm_data >> 12) & 0xF; - pba_num[1] = (nvm_data >> 8) & 0xF; - pba_num[2] = (nvm_data >> 4) & 0xF; - pba_num[3] = nvm_data & 0xF; - pba_num[4] = (pba_ptr >> 12) & 0xF; - pba_num[5] = (pba_ptr >> 8) & 0xF; - pba_num[6] = '-'; - pba_num[7] = 0; - pba_num[8] = (pba_ptr >> 4) & 0xF; - pba_num[9] = pba_ptr & 0xF; - - /* put a null character on the end of our string */ - pba_num[10] = '\0'; - - /* switch all the data but the '-' to hex char */ - for (offset = 0; offset < 10; offset++) { - if (pba_num[offset] < 0xA) - pba_num[offset] += '0'; - else if (pba_num[offset] < 0x10) - pba_num[offset] += 'A' - 0xA; - } - - return E1000_SUCCESS; - } - - ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if (length == 0xFFFF || length == 0) { - DEBUGOUT("NVM PBA number section invalid length\n"); - return -E1000_ERR_NVM_PBA_SECTION; - } - /* check if pba_num buffer is big enough */ - if (pba_num_size < (((u32)length * 2) - 1)) { - DEBUGOUT("PBA string buffer too small\n"); - return -E1000_ERR_NO_SPACE; - } - - /* trim pba length from start of string */ - pba_ptr++; - length--; - - for (offset = 0; offset < length; offset++) { - ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - pba_num[offset * 2] = (u8)(nvm_data >> 8); - pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); - } - pba_num[offset * 2] = '\0'; - - return E1000_SUCCESS; -} - -/** - * e1000_read_pba_length_generic - Read device part number length - * @hw: pointer to the HW structure - * @pba_num_size: size of part number buffer - * - * Reads the product board assembly (PBA) number length from the EEPROM and - * stores the value in pba_num_size. - **/ -s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size) -{ - s32 ret_val; - u16 nvm_data; - u16 pba_ptr; - u16 length; - - DEBUGFUNC("e1000_read_pba_length_generic"); - - if (pba_num_size == NULL) { - DEBUGOUT("PBA buffer size was null\n"); - return -E1000_ERR_INVALID_ARGUMENT; - } - - ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - /* if data is not ptr guard the PBA must be in legacy format */ - if (nvm_data != NVM_PBA_PTR_GUARD) { - *pba_num_size = E1000_PBANUM_LENGTH; - return E1000_SUCCESS; - } - - ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if (length == 0xFFFF || length == 0) { - DEBUGOUT("NVM PBA number section invalid length\n"); - return -E1000_ERR_NVM_PBA_SECTION; - } - - /* Convert from length in u16 values to u8 chars, add 1 for NULL, - * and subtract 2 because length field is included in length. - */ - *pba_num_size = ((u32)length * 2) - 1; - - return E1000_SUCCESS; -} - - - - - -/** - * e1000_read_mac_addr_generic - Read device MAC address - * @hw: pointer to the HW structure - * - * Reads the device MAC address from the EEPROM and stores the value. - * Since devices with two ports use the same EEPROM, we increment the - * last bit in the MAC address for the second port. - **/ -s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) -{ - u32 rar_high; - u32 rar_low; - u16 i; - - rar_high = E1000_READ_REG(hw, E1000_RAH(0)); - rar_low = E1000_READ_REG(hw, E1000_RAL(0)); - - for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) - hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); - - for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) - hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); - - for (i = 0; i < ETH_ADDR_LEN; i++) - hw->mac.addr[i] = hw->mac.perm_addr[i]; - - return E1000_SUCCESS; -} - -/** - * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM checksum by reading/adding each word of the EEPROM - * and then verifies that the sum of the EEPROM is equal to 0xBABA. - **/ -s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw) -{ - s32 ret_val; - u16 checksum = 0; - u16 i, nvm_data; - - DEBUGFUNC("e1000_validate_nvm_checksum_generic"); - - for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { - ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - checksum += nvm_data; - } - - if (checksum != (u16) NVM_SUM) { - DEBUGOUT("NVM Checksum Invalid\n"); - return -E1000_ERR_NVM; - } - - return E1000_SUCCESS; -} - -/** - * e1000_update_nvm_checksum_generic - Update EEPROM checksum - * @hw: pointer to the HW structure - * - * Updates the EEPROM checksum by reading/adding each word of the EEPROM - * up to the checksum. Then calculates the EEPROM checksum and writes the - * value to the EEPROM. - **/ -s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw) -{ - s32 ret_val; - u16 checksum = 0; - u16 i, nvm_data; - - DEBUGFUNC("e1000_update_nvm_checksum"); - - for (i = 0; i < NVM_CHECKSUM_REG; i++) { - ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error while updating checksum.\n"); - return ret_val; - } - checksum += nvm_data; - } - checksum = (u16) NVM_SUM - checksum; - ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); - if (ret_val) - DEBUGOUT("NVM Write Error while updating checksum.\n"); - - return ret_val; -} - -/** - * e1000_reload_nvm_generic - Reloads EEPROM - * @hw: pointer to the HW structure - * - * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the - * extended control register. - **/ -static void e1000_reload_nvm_generic(struct e1000_hw *hw) -{ - u32 ctrl_ext; - - DEBUGFUNC("e1000_reload_nvm_generic"); - - usec_delay(10); - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); -} - -/** - * e1000_get_fw_version - Get firmware version information - * @hw: pointer to the HW structure - * @fw_vers: pointer to output version structure - * - * unsupported/not present features return 0 in version structure - **/ -void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) -{ - u16 eeprom_verh, eeprom_verl, etrack_test, fw_version; - u8 q, hval, rem, result; - u16 comb_verh, comb_verl, comb_offset; - - memset(fw_vers, 0, sizeof(struct e1000_fw_version)); - - /* basic eeprom version numbers, bits used vary by part and by tool - * used to create the nvm images */ - /* Check which data format we have */ - hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); - switch (hw->mac.type) { - case e1000_i211: - e1000_read_invm_version(hw, fw_vers); - return; - case e1000_82575: - case e1000_82576: - case e1000_82580: - /* Use this format, unless EETRACK ID exists, - * then use alternate format - */ - if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) { - hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); - fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) - >> NVM_MAJOR_SHIFT; - fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK) - >> NVM_MINOR_SHIFT; - fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK); - goto etrack_id; - } - break; - case e1000_i210: - if (!(e1000_get_flash_presence_i210(hw))) { - e1000_read_invm_version(hw, fw_vers); - return; - } - /* fall through */ - case e1000_i350: - case e1000_i354: - /* find combo image version */ - hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); - if ((comb_offset != 0x0) && - (comb_offset != NVM_VER_INVALID)) { - - hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset - + 1), 1, &comb_verh); - hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), - 1, &comb_verl); - - /* get Option Rom version if it exists and is valid */ - if ((comb_verh && comb_verl) && - ((comb_verh != NVM_VER_INVALID) && - (comb_verl != NVM_VER_INVALID))) { - - fw_vers->or_valid = true; - fw_vers->or_major = - comb_verl >> NVM_COMB_VER_SHFT; - fw_vers->or_build = - (comb_verl << NVM_COMB_VER_SHFT) - | (comb_verh >> NVM_COMB_VER_SHFT); - fw_vers->or_patch = - comb_verh & NVM_COMB_VER_MASK; - } - } - break; - default: - return; - } - hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); - fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) - >> NVM_MAJOR_SHIFT; - - /* check for old style version format in newer images*/ - if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) { - eeprom_verl = (fw_version & NVM_COMB_VER_MASK); - } else { - eeprom_verl = (fw_version & NVM_MINOR_MASK) - >> NVM_MINOR_SHIFT; - } - /* Convert minor value to hex before assigning to output struct - * Val to be converted will not be higher than 99, per tool output - */ - q = eeprom_verl / NVM_HEX_CONV; - hval = q * NVM_HEX_TENS; - rem = eeprom_verl % NVM_HEX_CONV; - result = hval + rem; - fw_vers->eep_minor = result; - -etrack_id: - if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) { - hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); - hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); - fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) - | eeprom_verl; - } - return; -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.h b/kernel/linux/kni/ethtool/igb/e1000_nvm.h deleted file mode 100644 index e27b1c0ad2..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_nvm.h +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_NVM_H_ -#define _E1000_NVM_H_ - - -struct e1000_fw_version { - u32 etrack_id; - u16 eep_major; - u16 eep_minor; - u16 eep_build; - - u8 invm_major; - u8 invm_minor; - u8 invm_img_type; - - bool or_valid; - u16 or_major; - u16 or_build; - u16 or_patch; -}; - - -void e1000_init_nvm_ops_generic(struct e1000_hw *hw); -s32 e1000_null_read_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); -void e1000_null_nvm_generic(struct e1000_hw *hw); -s32 e1000_null_led_default(struct e1000_hw *hw, u16 *data); -s32 e1000_null_write_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); -s32 e1000_acquire_nvm_generic(struct e1000_hw *hw); - -s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); -s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); -s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, - u32 pba_num_size); -s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size); -s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data); -s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw); -s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw); -void e1000_release_nvm_generic(struct e1000_hw *hw); -void e1000_get_fw_version(struct e1000_hw *hw, - struct e1000_fw_version *fw_vers); - -#define E1000_STM_OPCODE 0xDB00 - -#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_osdep.h b/kernel/linux/kni/ethtool/igb/e1000_osdep.h deleted file mode 100644 index 3228100e59..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_osdep.h +++ /dev/null @@ -1,121 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - - -/* glue for the OS independent part of e1000 - * includes register access macros - */ - -#ifndef _E1000_OSDEP_H_ -#define _E1000_OSDEP_H_ - -#include -#include -#include -#include -#include -#include "kcompat.h" - -#ifndef __INTEL_COMPILER -#pragma GCC diagnostic ignored "-Wunused-function" -#endif - -#define usec_delay(x) udelay(x) -#define usec_delay_irq(x) udelay(x) -#ifndef msec_delay -#define msec_delay(x) do { \ - /* Don't mdelay in interrupt context! */ \ - if (in_interrupt()) \ - BUG(); \ - else \ - msleep(x); \ -} while (0) - -/* Some workarounds require millisecond delays and are run during interrupt - * context. Most notably, when establishing link, the phy may need tweaking - * but cannot process phy register reads/writes faster than millisecond - * intervals...and we establish link due to a "link status change" interrupt. - */ -#define msec_delay_irq(x) mdelay(x) -#endif - -#define PCI_COMMAND_REGISTER PCI_COMMAND -#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE -#define ETH_ADDR_LEN ETH_ALEN - -#ifdef __BIG_ENDIAN -#define E1000_BIG_ENDIAN __BIG_ENDIAN -#endif - - -#ifdef DEBUG -#define DEBUGOUT(S) printk(KERN_DEBUG S) -#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A) -#else -#define DEBUGOUT(S) -#define DEBUGOUT1(S, A...) -#endif - -#ifdef DEBUG_FUNC -#define DEBUGFUNC(F) DEBUGOUT(F "\n") -#else -#define DEBUGFUNC(F) -#endif -#define DEBUGOUT2 DEBUGOUT1 -#define DEBUGOUT3 DEBUGOUT2 -#define DEBUGOUT7 DEBUGOUT3 - -#define E1000_REGISTER(a, reg) reg - -#define E1000_WRITE_REG(a, reg, value) ( \ - writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg)))) - -#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg))) - -#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \ - writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))) - -#define E1000_READ_REG_ARRAY(a, reg, offset) ( \ - readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))) - -#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY -#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY - -#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \ - writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))) - -#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \ - readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))) - -#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \ - writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))) - -#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \ - readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))) - -#define E1000_WRITE_REG_IO(a, reg, offset) do { \ - outl(reg, ((a)->io_base)); \ - outl(offset, ((a)->io_base + 4)); } while (0) - -#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS) - -#define E1000_WRITE_FLASH_REG(a, reg, value) ( \ - writel((value), ((a)->flash_address + reg))) - -#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \ - writew((value), ((a)->flash_address + reg))) - -#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg)) - -#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg)) - -#endif /* _E1000_OSDEP_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.c b/kernel/linux/kni/ethtool/igb/e1000_phy.c deleted file mode 100644 index 1934a309cd..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_phy.c +++ /dev/null @@ -1,3392 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000_api.h" - -static s32 e1000_wait_autoneg(struct e1000_hw *hw); -/* Cable length tables */ -static const u16 e1000_m88_cable_length_table[] = { - 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; -#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_m88_cable_length_table) / \ - sizeof(e1000_m88_cable_length_table[0])) - -static const u16 e1000_igp_2_cable_length_table[] = { - 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, - 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, - 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40, - 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61, - 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82, - 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, - 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, - 124}; -#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_igp_2_cable_length_table) / \ - sizeof(e1000_igp_2_cable_length_table[0])) - -/** - * e1000_init_phy_ops_generic - Initialize PHY function pointers - * @hw: pointer to the HW structure - * - * Setups up the function pointers to no-op functions - **/ -void e1000_init_phy_ops_generic(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - DEBUGFUNC("e1000_init_phy_ops_generic"); - - /* Initialize function pointers */ - phy->ops.init_params = e1000_null_ops_generic; - phy->ops.acquire = e1000_null_ops_generic; - phy->ops.check_polarity = e1000_null_ops_generic; - phy->ops.check_reset_block = e1000_null_ops_generic; - phy->ops.commit = e1000_null_ops_generic; - phy->ops.force_speed_duplex = e1000_null_ops_generic; - phy->ops.get_cfg_done = e1000_null_ops_generic; - phy->ops.get_cable_length = e1000_null_ops_generic; - phy->ops.get_info = e1000_null_ops_generic; - phy->ops.set_page = e1000_null_set_page; - phy->ops.read_reg = e1000_null_read_reg; - phy->ops.read_reg_locked = e1000_null_read_reg; - phy->ops.read_reg_page = e1000_null_read_reg; - phy->ops.release = e1000_null_phy_generic; - phy->ops.reset = e1000_null_ops_generic; - phy->ops.set_d0_lplu_state = e1000_null_lplu_state; - phy->ops.set_d3_lplu_state = e1000_null_lplu_state; - phy->ops.write_reg = e1000_null_write_reg; - phy->ops.write_reg_locked = e1000_null_write_reg; - phy->ops.write_reg_page = e1000_null_write_reg; - phy->ops.power_up = e1000_null_phy_generic; - phy->ops.power_down = e1000_null_phy_generic; - phy->ops.read_i2c_byte = e1000_read_i2c_byte_null; - phy->ops.write_i2c_byte = e1000_write_i2c_byte_null; -} - -/** - * e1000_null_set_page - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_set_page(struct e1000_hw E1000_UNUSEDARG *hw, - u16 E1000_UNUSEDARG data) -{ - DEBUGFUNC("e1000_null_set_page"); - return E1000_SUCCESS; -} - -/** - * e1000_null_read_reg - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_read_reg(struct e1000_hw E1000_UNUSEDARG *hw, - u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG *data) -{ - DEBUGFUNC("e1000_null_read_reg"); - return E1000_SUCCESS; -} - -/** - * e1000_null_phy_generic - No-op function, return void - * @hw: pointer to the HW structure - **/ -void e1000_null_phy_generic(struct e1000_hw E1000_UNUSEDARG *hw) -{ - DEBUGFUNC("e1000_null_phy_generic"); - return; -} - -/** - * e1000_null_lplu_state - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_lplu_state(struct e1000_hw E1000_UNUSEDARG *hw, - bool E1000_UNUSEDARG active) -{ - DEBUGFUNC("e1000_null_lplu_state"); - return E1000_SUCCESS; -} - -/** - * e1000_null_write_reg - No-op function, return 0 - * @hw: pointer to the HW structure - **/ -s32 e1000_null_write_reg(struct e1000_hw E1000_UNUSEDARG *hw, - u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG data) -{ - DEBUGFUNC("e1000_null_write_reg"); - return E1000_SUCCESS; -} - -/** - * e1000_read_i2c_byte_null - No-op function, return 0 - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: device address - * @data: data value read - * - **/ -s32 e1000_read_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, - u8 E1000_UNUSEDARG byte_offset, - u8 E1000_UNUSEDARG dev_addr, - u8 E1000_UNUSEDARG *data) -{ - DEBUGFUNC("e1000_read_i2c_byte_null"); - return E1000_SUCCESS; -} - -/** - * e1000_write_i2c_byte_null - No-op function, return 0 - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: device address - * @data: data value to write - * - **/ -s32 e1000_write_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, - u8 E1000_UNUSEDARG byte_offset, - u8 E1000_UNUSEDARG dev_addr, - u8 E1000_UNUSEDARG data) -{ - DEBUGFUNC("e1000_write_i2c_byte_null"); - return E1000_SUCCESS; -} - -/** - * e1000_check_reset_block_generic - Check if PHY reset is blocked - * @hw: pointer to the HW structure - * - * Read the PHY management control register and check whether a PHY reset - * is blocked. If a reset is not blocked return E1000_SUCCESS, otherwise - * return E1000_BLK_PHY_RESET (12). - **/ -s32 e1000_check_reset_block_generic(struct e1000_hw *hw) -{ - u32 manc; - - DEBUGFUNC("e1000_check_reset_block"); - - manc = E1000_READ_REG(hw, E1000_MANC); - - return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? - E1000_BLK_PHY_RESET : E1000_SUCCESS; -} - -/** - * e1000_get_phy_id - Retrieve the PHY ID and revision - * @hw: pointer to the HW structure - * - * Reads the PHY registers and stores the PHY ID and possibly the PHY - * revision in the hardware structure. - **/ -s32 e1000_get_phy_id(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_id; - - DEBUGFUNC("e1000_get_phy_id"); - - if (!phy->ops.read_reg) - return E1000_SUCCESS; - - ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); - if (ret_val) - return ret_val; - - phy->id = (u32)(phy_id << 16); - usec_delay(20); - ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); - if (ret_val) - return ret_val; - - phy->id |= (u32)(phy_id & PHY_REVISION_MASK); - phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); - - - return E1000_SUCCESS; -} - -/** - * e1000_phy_reset_dsp_generic - Reset PHY DSP - * @hw: pointer to the HW structure - * - * Reset the digital signal processor. - **/ -s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw) -{ - s32 ret_val; - - DEBUGFUNC("e1000_phy_reset_dsp_generic"); - - if (!hw->phy.ops.write_reg) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); - if (ret_val) - return ret_val; - - return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); -} - -/** - * e1000_read_phy_reg_mdic - Read MDI control register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the MDI control register in the PHY at offset and stores the - * information read to data. - **/ -s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 i, mdic = 0; - - DEBUGFUNC("e1000_read_phy_reg_mdic"); - - if (offset > MAX_PHY_REG_ADDRESS) { - DEBUGOUT1("PHY Address %d is out of range\n", offset); - return -E1000_ERR_PARAM; - } - - /* Set up Op-code, Phy Address, and register offset in the MDI - * Control register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - mdic = ((offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_READ)); - - E1000_WRITE_REG(hw, E1000_MDIC, mdic); - - /* Poll the ready bit to see if the MDI read completed - * Increasing the time out as testing showed failures with - * the lower time out - */ - for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - usec_delay_irq(50); - mdic = E1000_READ_REG(hw, E1000_MDIC); - if (mdic & E1000_MDIC_READY) - break; - } - if (!(mdic & E1000_MDIC_READY)) { - DEBUGOUT("MDI Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (mdic & E1000_MDIC_ERROR) { - DEBUGOUT("MDI Error\n"); - return -E1000_ERR_PHY; - } - if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { - DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n", - offset, - (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); - return -E1000_ERR_PHY; - } - *data = (u16) mdic; - - return E1000_SUCCESS; -} - -/** - * e1000_write_phy_reg_mdic - Write MDI control register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write to register at offset - * - * Writes data to MDI control register in the PHY at offset. - **/ -s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 i, mdic = 0; - - DEBUGFUNC("e1000_write_phy_reg_mdic"); - - if (offset > MAX_PHY_REG_ADDRESS) { - DEBUGOUT1("PHY Address %d is out of range\n", offset); - return -E1000_ERR_PARAM; - } - - /* Set up Op-code, Phy Address, and register offset in the MDI - * Control register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - mdic = (((u32)data) | - (offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_WRITE)); - - E1000_WRITE_REG(hw, E1000_MDIC, mdic); - - /* Poll the ready bit to see if the MDI read completed - * Increasing the time out as testing showed failures with - * the lower time out - */ - for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - usec_delay_irq(50); - mdic = E1000_READ_REG(hw, E1000_MDIC); - if (mdic & E1000_MDIC_READY) - break; - } - if (!(mdic & E1000_MDIC_READY)) { - DEBUGOUT("MDI Write did not complete\n"); - return -E1000_ERR_PHY; - } - if (mdic & E1000_MDIC_ERROR) { - DEBUGOUT("MDI Error\n"); - return -E1000_ERR_PHY; - } - if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { - DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n", - offset, - (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); - return -E1000_ERR_PHY; - } - - return E1000_SUCCESS; -} - -/** - * e1000_read_phy_reg_i2c - Read PHY register using i2c - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the PHY register at offset using the i2c interface and stores the - * retrieved information in data. - **/ -s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 i, i2ccmd = 0; - - DEBUGFUNC("e1000_read_phy_reg_i2c"); - - /* Set up Op-code, Phy Address, and register address in the I2CCMD - * register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - (E1000_I2CCMD_OPCODE_READ)); - - E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); - - /* Poll the ready bit to see if the I2C read completed */ - for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { - usec_delay(50); - i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); - if (i2ccmd & E1000_I2CCMD_READY) - break; - } - if (!(i2ccmd & E1000_I2CCMD_READY)) { - DEBUGOUT("I2CCMD Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (i2ccmd & E1000_I2CCMD_ERROR) { - DEBUGOUT("I2CCMD Error bit set\n"); - return -E1000_ERR_PHY; - } - - /* Need to byte-swap the 16-bit value. */ - *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00); - - return E1000_SUCCESS; -} - -/** - * e1000_write_phy_reg_i2c - Write PHY register using i2c - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Writes the data to PHY register at the offset using the i2c interface. - **/ -s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 i, i2ccmd = 0; - u16 phy_data_swapped; - - DEBUGFUNC("e1000_write_phy_reg_i2c"); - - /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/ - if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) { - DEBUGOUT1("PHY I2C Address %d is out of range.\n", - hw->phy.addr); - return -E1000_ERR_CONFIG; - } - - /* Swap the data bytes for the I2C interface */ - phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); - - /* Set up Op-code, Phy Address, and register address in the I2CCMD - * register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_WRITE | - phy_data_swapped); - - E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); - - /* Poll the ready bit to see if the I2C read completed */ - for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { - usec_delay(50); - i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); - if (i2ccmd & E1000_I2CCMD_READY) - break; - } - if (!(i2ccmd & E1000_I2CCMD_READY)) { - DEBUGOUT("I2CCMD Write did not complete\n"); - return -E1000_ERR_PHY; - } - if (i2ccmd & E1000_I2CCMD_ERROR) { - DEBUGOUT("I2CCMD Error bit set\n"); - return -E1000_ERR_PHY; - } - - return E1000_SUCCESS; -} - -/** - * e1000_read_sfp_data_byte - Reads SFP module data. - * @hw: pointer to the HW structure - * @offset: byte location offset to be read - * @data: read data buffer pointer - * - * Reads one byte from SFP module data stored - * in SFP resided EEPROM memory or SFP diagnostic area. - * Function should be called with - * E1000_I2CCMD_SFP_DATA_ADDR() for SFP module database access - * E1000_I2CCMD_SFP_DIAG_ADDR() for SFP diagnostics parameters - * access - **/ -s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data) -{ - u32 i = 0; - u32 i2ccmd = 0; - u32 data_local = 0; - - DEBUGFUNC("e1000_read_sfp_data_byte"); - - if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { - DEBUGOUT("I2CCMD command address exceeds upper limit\n"); - return -E1000_ERR_PHY; - } - - /* Set up Op-code, EEPROM Address,in the I2CCMD - * register. The MAC will take care of interfacing with the - * EEPROM to retrieve the desired data. - */ - i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_READ); - - E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); - - /* Poll the ready bit to see if the I2C read completed */ - for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { - usec_delay(50); - data_local = E1000_READ_REG(hw, E1000_I2CCMD); - if (data_local & E1000_I2CCMD_READY) - break; - } - if (!(data_local & E1000_I2CCMD_READY)) { - DEBUGOUT("I2CCMD Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (data_local & E1000_I2CCMD_ERROR) { - DEBUGOUT("I2CCMD Error bit set\n"); - return -E1000_ERR_PHY; - } - *data = (u8) data_local & 0xFF; - - return E1000_SUCCESS; -} - -/** - * e1000_write_sfp_data_byte - Writes SFP module data. - * @hw: pointer to the HW structure - * @offset: byte location offset to write to - * @data: data to write - * - * Writes one byte to SFP module data stored - * in SFP resided EEPROM memory or SFP diagnostic area. - * Function should be called with - * E1000_I2CCMD_SFP_DATA_ADDR() for SFP module database access - * E1000_I2CCMD_SFP_DIAG_ADDR() for SFP diagnostics parameters - * access - **/ -s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data) -{ - u32 i = 0; - u32 i2ccmd = 0; - u32 data_local = 0; - - DEBUGFUNC("e1000_write_sfp_data_byte"); - - if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { - DEBUGOUT("I2CCMD command address exceeds upper limit\n"); - return -E1000_ERR_PHY; - } - /* The programming interface is 16 bits wide - * so we need to read the whole word first - * then update appropriate byte lane and write - * the updated word back. - */ - /* Set up Op-code, EEPROM Address,in the I2CCMD - * register. The MAC will take care of interfacing - * with an EEPROM to write the data given. - */ - i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_READ); - /* Set a command to read single word */ - E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); - for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { - usec_delay(50); - /* Poll the ready bit to see if lastly - * launched I2C operation completed - */ - i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); - if (i2ccmd & E1000_I2CCMD_READY) { - /* Check if this is READ or WRITE phase */ - if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) == - E1000_I2CCMD_OPCODE_READ) { - /* Write the selected byte - * lane and update whole word - */ - data_local = i2ccmd & 0xFF00; - data_local |= data; - i2ccmd = ((offset << - E1000_I2CCMD_REG_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_WRITE | data_local); - E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); - } else { - break; - } - } - } - if (!(i2ccmd & E1000_I2CCMD_READY)) { - DEBUGOUT("I2CCMD Write did not complete\n"); - return -E1000_ERR_PHY; - } - if (i2ccmd & E1000_I2CCMD_ERROR) { - DEBUGOUT("I2CCMD Error bit set\n"); - return -E1000_ERR_PHY; - } - return E1000_SUCCESS; -} - -/** - * e1000_read_phy_reg_m88 - Read m88 PHY register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired - * semaphores before exiting. - **/ -s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_read_phy_reg_m88"); - - if (!hw->phy.ops.acquire) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - - hw->phy.ops.release(hw); - - return ret_val; -} - -/** - * e1000_write_phy_reg_m88 - Write m88 PHY register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Acquires semaphore, if necessary, then writes the data to PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_write_phy_reg_m88"); - - if (!hw->phy.ops.acquire) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - - hw->phy.ops.release(hw); - - return ret_val; -} - -/** - * e1000_set_page_igp - Set page as on IGP-like PHY(s) - * @hw: pointer to the HW structure - * @page: page to set (shifted left when necessary) - * - * Sets PHY page required for PHY register access. Assumes semaphore is - * already acquired. Note, this function sets phy.addr to 1 so the caller - * must set it appropriately (if necessary) after this function returns. - **/ -s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page) -{ - DEBUGFUNC("e1000_set_page_igp"); - - DEBUGOUT1("Setting page 0x%x\n", page); - - hw->phy.addr = 1; - - return e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page); -} - -/** - * __e1000_read_phy_reg_igp - Read igp PHY register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * @locked: semaphore has already been acquired or not - * - * Acquires semaphore, if necessary, then reads the PHY register at offset - * and stores the retrieved information in data. Release any acquired - * semaphores before exiting. - **/ -static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, - bool locked) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("__e1000_read_phy_reg_igp"); - - if (!locked) { - if (!hw->phy.ops.acquire) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - } - - if (offset > MAX_PHY_MULTI_PAGE_REG) - ret_val = e1000_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); - if (!ret_val) - ret_val = e1000_read_phy_reg_mdic(hw, - MAX_PHY_REG_ADDRESS & offset, - data); - if (!locked) - hw->phy.ops.release(hw); - - return ret_val; -} - -/** - * e1000_read_phy_reg_igp - Read igp PHY register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Acquires semaphore then reads the PHY register at offset and stores the - * retrieved information in data. - * Release the acquired semaphore before exiting. - **/ -s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) -{ - return __e1000_read_phy_reg_igp(hw, offset, data, false); -} - -/** - * e1000_read_phy_reg_igp_locked - Read igp PHY register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the PHY register at offset and stores the retrieved information - * in data. Assumes semaphore already acquired. - **/ -s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) -{ - return __e1000_read_phy_reg_igp(hw, offset, data, true); -} - -/** - * e1000_write_phy_reg_igp - Write igp PHY register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * @locked: semaphore has already been acquired or not - * - * Acquires semaphore, if necessary, then writes the data to PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, - bool locked) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_write_phy_reg_igp"); - - if (!locked) { - if (!hw->phy.ops.acquire) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - } - - if (offset > MAX_PHY_MULTI_PAGE_REG) - ret_val = e1000_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); - if (!ret_val) - ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & - offset, - data); - if (!locked) - hw->phy.ops.release(hw); - - return ret_val; -} - -/** - * e1000_write_phy_reg_igp - Write igp PHY register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Acquires semaphore then writes the data to PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) -{ - return __e1000_write_phy_reg_igp(hw, offset, data, false); -} - -/** - * e1000_write_phy_reg_igp_locked - Write igp PHY register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Writes the data to PHY register at the offset. - * Assumes semaphore already acquired. - **/ -s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) -{ - return __e1000_write_phy_reg_igp(hw, offset, data, true); -} - -/** - * __e1000_read_kmrn_reg - Read kumeran register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * @locked: semaphore has already been acquired or not - * - * Acquires semaphore, if necessary. Then reads the PHY register at offset - * using the kumeran interface. The information retrieved is stored in data. - * Release any acquired semaphores before exiting. - **/ -static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, - bool locked) -{ - u32 kmrnctrlsta; - - DEBUGFUNC("__e1000_read_kmrn_reg"); - - if (!locked) { - s32 ret_val = E1000_SUCCESS; - - if (!hw->phy.ops.acquire) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - } - - kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; - E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); - E1000_WRITE_FLUSH(hw); - - usec_delay(2); - - kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA); - *data = (u16)kmrnctrlsta; - - if (!locked) - hw->phy.ops.release(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_read_kmrn_reg_generic - Read kumeran register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Acquires semaphore then reads the PHY register at offset using the - * kumeran interface. The information retrieved is stored in data. - * Release the acquired semaphore before exiting. - **/ -s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data) -{ - return __e1000_read_kmrn_reg(hw, offset, data, false); -} - -/** - * e1000_read_kmrn_reg_locked - Read kumeran register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the PHY register at offset using the kumeran interface. The - * information retrieved is stored in data. - * Assumes semaphore already acquired. - **/ -s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) -{ - return __e1000_read_kmrn_reg(hw, offset, data, true); -} - -/** - * __e1000_write_kmrn_reg - Write kumeran register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * @locked: semaphore has already been acquired or not - * - * Acquires semaphore, if necessary. Then write the data to PHY register - * at the offset using the kumeran interface. Release any acquired semaphores - * before exiting. - **/ -static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, - bool locked) -{ - u32 kmrnctrlsta; - - DEBUGFUNC("e1000_write_kmrn_reg_generic"); - - if (!locked) { - s32 ret_val = E1000_SUCCESS; - - if (!hw->phy.ops.acquire) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - } - - kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | data; - E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); - E1000_WRITE_FLUSH(hw); - - usec_delay(2); - - if (!locked) - hw->phy.ops.release(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_write_kmrn_reg_generic - Write kumeran register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Acquires semaphore then writes the data to the PHY register at the offset - * using the kumeran interface. Release the acquired semaphore before exiting. - **/ -s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data) -{ - return __e1000_write_kmrn_reg(hw, offset, data, false); -} - -/** - * e1000_write_kmrn_reg_locked - Write kumeran register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Write the data to PHY register at the offset using the kumeran interface. - * Assumes semaphore already acquired. - **/ -s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) -{ - return __e1000_write_kmrn_reg(hw, offset, data, true); -} - -/** - * e1000_set_master_slave_mode - Setup PHY for Master/slave mode - * @hw: pointer to the HW structure - * - * Sets up Master/slave mode - **/ -static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) -{ - s32 ret_val; - u16 phy_data; - - /* Resolve Master/Slave mode */ - ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data); - if (ret_val) - return ret_val; - - /* load defaults for future use */ - hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? - e1000_ms_force_master : - e1000_ms_force_slave) : e1000_ms_auto; - - switch (hw->phy.ms_type) { - case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); - break; - case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); - break; - case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; - /* fall-through */ - default: - break; - } - - return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data); -} - -/** - * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link - * @hw: pointer to the HW structure - * - * Sets up Carrier-sense on Transmit and downshift values. - **/ -s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) -{ - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_setup_82577"); - - if (hw->phy.reset_disable) - return E1000_SUCCESS; - - if (hw->phy.type == e1000_phy_82580) { - ret_val = hw->phy.ops.reset(hw); - if (ret_val) { - DEBUGOUT("Error resetting the PHY.\n"); - return ret_val; - } - } - - /* Enable CRS on Tx. This must be set for half-duplex operation. */ - ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= I82577_CFG_ASSERT_CRS_ON_TX; - - /* Enable downshift */ - phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; - - ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data); - if (ret_val) - return ret_val; - - /* Set MDI/MDIX mode */ - ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); - if (ret_val) - return ret_val; - phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK; - /* Options: - * 0 - Auto (default) - * 1 - MDI mode - * 2 - MDI-X mode - */ - switch (hw->phy.mdix) { - case 1: - break; - case 2: - phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX; - break; - case 0: - default: - phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX; - break; - } - ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); - if (ret_val) - return ret_val; - - return e1000_set_master_slave_mode(hw); -} - -/** - * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link - * @hw: pointer to the HW structure - * - * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock - * and downshift values are set also. - **/ -s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_setup_m88"); - - if (phy->reset_disable) - return E1000_SUCCESS; - - /* Enable CRS on Tx. This must be set for half-duplex operation. */ - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - - switch (phy->mdix) { - case 1: - phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; - break; - case 2: - phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; - break; - case 3: - phy_data |= M88E1000_PSCR_AUTO_X_1000T; - break; - case 0: - default: - phy_data |= M88E1000_PSCR_AUTO_X_MODE; - break; - } - - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if (phy->disable_polarity_correction) - phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - - ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - if (phy->revision < E1000_REVISION_4) { - /* Force TX_CLK in the Extended PHY Specific Control Register - * to 25MHz clock. - */ - ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_EPSCR_TX_CLK_25; - - if ((phy->revision == E1000_REVISION_2) && - (phy->id == M88E1111_I_PHY_ID)) { - /* 82573L PHY - set the downshift counter to 5x. */ - phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK; - phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; - } else { - /* Configure Master and Slave downshift values */ - phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); - phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); - } - ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - phy_data); - if (ret_val) - return ret_val; - } - - /* Commit the changes. */ - ret_val = phy->ops.commit(hw); - if (ret_val) { - DEBUGOUT("Error committing the PHY changes\n"); - return ret_val; - } - - return E1000_SUCCESS; -} - -/** - * e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link - * @hw: pointer to the HW structure - * - * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's. - * Also enables and sets the downshift parameters. - **/ -s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_setup_m88_gen2"); - - if (phy->reset_disable) - return E1000_SUCCESS; - - /* Enable CRS on Tx. This must be set for half-duplex operation. */ - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - - switch (phy->mdix) { - case 1: - phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; - break; - case 2: - phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; - break; - case 3: - /* M88E1112 does not support this mode) */ - if (phy->id != M88E1112_E_PHY_ID) { - phy_data |= M88E1000_PSCR_AUTO_X_1000T; - break; - } - case 0: - default: - phy_data |= M88E1000_PSCR_AUTO_X_MODE; - break; - } - - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if (phy->disable_polarity_correction) - phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - - /* Enable downshift and setting it to X6 */ - if (phy->id == M88E1543_E_PHY_ID) { - phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE; - ret_val = - phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - ret_val = phy->ops.commit(hw); - if (ret_val) { - DEBUGOUT("Error committing the PHY changes\n"); - return ret_val; - } - } - - phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK; - phy_data |= I347AT4_PSCR_DOWNSHIFT_6X; - phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE; - - ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* Commit the changes. */ - ret_val = phy->ops.commit(hw); - if (ret_val) { - DEBUGOUT("Error committing the PHY changes\n"); - return ret_val; - } - - ret_val = e1000_set_master_slave_mode(hw); - if (ret_val) - return ret_val; - - return E1000_SUCCESS; -} - -/** - * e1000_copper_link_setup_igp - Setup igp PHY's for copper link - * @hw: pointer to the HW structure - * - * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for - * igp PHY's. - **/ -s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - - DEBUGFUNC("e1000_copper_link_setup_igp"); - - if (phy->reset_disable) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.reset(hw); - if (ret_val) { - DEBUGOUT("Error resetting the PHY.\n"); - return ret_val; - } - - /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid - * timeout issues when LFS is enabled. - */ - msec_delay(100); - - /* disable lplu d0 during driver init */ - if (hw->phy.ops.set_d0_lplu_state) { - ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); - if (ret_val) { - DEBUGOUT("Error Disabling LPLU D0\n"); - return ret_val; - } - } - /* Configure mdi-mdix settings */ - ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data); - if (ret_val) - return ret_val; - - data &= ~IGP01E1000_PSCR_AUTO_MDIX; - - switch (phy->mdix) { - case 1: - data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 2: - data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 0: - default: - data |= IGP01E1000_PSCR_AUTO_MDIX; - break; - } - ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data); - if (ret_val) - return ret_val; - - /* set auto-master slave resolution settings */ - if (hw->mac.autoneg) { - /* when autonegotiation advertisement is only 1000Mbps then we - * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. - */ - if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { - /* Disable SmartSpeed */ - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - return ret_val; - - /* Set auto Master/Slave resolution process */ - ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data); - if (ret_val) - return ret_val; - - data &= ~CR_1000T_MS_ENABLE; - ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); - if (ret_val) - return ret_val; - } - - ret_val = e1000_set_master_slave_mode(hw); - } - - return ret_val; -} - -/** - * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation - * @hw: pointer to the HW structure - * - * Reads the MII auto-neg advertisement register and/or the 1000T control - * register and if the PHY is already setup for auto-negotiation, then - * return successful. Otherwise, setup advertisement and flow control to - * the appropriate values for the wanted auto-negotiation. - **/ -static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 mii_autoneg_adv_reg; - u16 mii_1000t_ctrl_reg = 0; - - DEBUGFUNC("e1000_phy_setup_autoneg"); - - phy->autoneg_advertised &= phy->autoneg_mask; - - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - if (phy->autoneg_mask & ADVERTISE_1000_FULL) { - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, - &mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - } - - /* Need to parse both autoneg_advertised and fc and set up - * the appropriate PHY registers. First we will parse for - * autoneg_advertised software override. Since we can advertise - * a plethora of combinations, we need to check each bit - * individually. - */ - - /* First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | - NWAY_AR_100TX_HD_CAPS | - NWAY_AR_10T_FD_CAPS | - NWAY_AR_10T_HD_CAPS); - mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); - - DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised); - - /* Do we want to advertise 10 Mb Half Duplex? */ - if (phy->autoneg_advertised & ADVERTISE_10_HALF) { - DEBUGOUT("Advertise 10mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; - } - - /* Do we want to advertise 10 Mb Full Duplex? */ - if (phy->autoneg_advertised & ADVERTISE_10_FULL) { - DEBUGOUT("Advertise 10mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; - } - - /* Do we want to advertise 100 Mb Half Duplex? */ - if (phy->autoneg_advertised & ADVERTISE_100_HALF) { - DEBUGOUT("Advertise 100mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; - } - - /* Do we want to advertise 100 Mb Full Duplex? */ - if (phy->autoneg_advertised & ADVERTISE_100_FULL) { - DEBUGOUT("Advertise 100mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; - } - - /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ - if (phy->autoneg_advertised & ADVERTISE_1000_HALF) - DEBUGOUT("Advertise 1000mb Half duplex request denied!\n"); - - /* Do we want to advertise 1000 Mb Full Duplex? */ - if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { - DEBUGOUT("Advertise 1000mb Full duplex\n"); - mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; - } - - /* Check for a software override of the flow control settings, and - * setup the PHY advertisement registers accordingly. If - * auto-negotiation is enabled, then software will have to set the - * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- - * negotiation. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * but we do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. - * other: No software override. The flow control configuration - * in the EEPROM is used. - */ - switch (hw->fc.current_mode) { - case e1000_fc_none: - /* Flow control (Rx & Tx) is completely disabled by a - * software over-ride. - */ - mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - case e1000_fc_rx_pause: - /* Rx Flow control is enabled, and Tx Flow control is - * disabled, by a software over-ride. - * - * Since there really isn't a way to advertise that we are - * capable of Rx Pause ONLY, we will advertise that we - * support both symmetric and asymmetric Rx PAUSE. Later - * (in e1000_config_fc_after_link_up) we will disable the - * hw's ability to send PAUSE frames. - */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - case e1000_fc_tx_pause: - /* Tx Flow control is enabled, and Rx Flow control is - * disabled, by a software over-ride. - */ - mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; - mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; - break; - case e1000_fc_full: - /* Flow control (both Rx and Tx) is enabled by a software - * over-ride. - */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - - if (phy->autoneg_mask & ADVERTISE_1000_FULL) - ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, - mii_1000t_ctrl_reg); - - return ret_val; -} - -/** - * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link - * @hw: pointer to the HW structure - * - * Performs initial bounds checking on autoneg advertisement parameter, then - * configure to advertise the full capability. Setup the PHY to autoneg - * and restart the negotiation process between the link partner. If - * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. - **/ -static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_ctrl; - - DEBUGFUNC("e1000_copper_link_autoneg"); - - /* Perform some bounds checking on the autoneg advertisement - * parameter. - */ - phy->autoneg_advertised &= phy->autoneg_mask; - - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if (!phy->autoneg_advertised) - phy->autoneg_advertised = phy->autoneg_mask; - - DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); - ret_val = e1000_phy_setup_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error Setting up Auto-Negotiation\n"); - return ret_val; - } - DEBUGOUT("Restarting Auto-Neg\n"); - - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); - if (ret_val) - return ret_val; - - phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); - if (ret_val) - return ret_val; - - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if (phy->autoneg_wait_to_complete) { - ret_val = e1000_wait_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error while waiting for autoneg to complete\n"); - return ret_val; - } - } - - hw->mac.get_link_status = true; - - return ret_val; -} - -/** - * e1000_setup_copper_link_generic - Configure copper link settings - * @hw: pointer to the HW structure - * - * Calls the appropriate function to configure the link for auto-neg or forced - * speed and duplex. Then we check for link, once link is established calls - * to configure collision distance and flow control are called. If link is - * not established, we return -E1000_ERR_PHY (-2). - **/ -s32 e1000_setup_copper_link_generic(struct e1000_hw *hw) -{ - s32 ret_val; - bool link; - - DEBUGFUNC("e1000_setup_copper_link_generic"); - - if (hw->mac.autoneg) { - /* Setup autoneg and flow control advertisement and perform - * autonegotiation. - */ - ret_val = e1000_copper_link_autoneg(hw); - if (ret_val) - return ret_val; - } else { - /* PHY will be set to 10H, 10F, 100H or 100F - * depending on user settings. - */ - DEBUGOUT("Forcing Speed and Duplex\n"); - ret_val = hw->phy.ops.force_speed_duplex(hw); - if (ret_val) { - DEBUGOUT("Error Forcing Speed and Duplex\n"); - return ret_val; - } - } - - /* Check link status. Wait up to 100 microseconds for link to become - * valid. - */ - ret_val = e1000_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10, - &link); - if (ret_val) - return ret_val; - - if (link) { - DEBUGOUT("Valid link established!!!\n"); - hw->mac.ops.config_collision_dist(hw); - ret_val = e1000_config_fc_after_link_up_generic(hw); - } else { - DEBUGOUT("Unable to establish link!!!\n"); - } - - return ret_val; -} - -/** - * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY - * @hw: pointer to the HW structure - * - * Calls the PHY setup function to force speed and duplex. Clears the - * auto-crossover to force MDI manually. Waits for link and returns - * successful if link up is successful, else -E1000_ERR_PHY (-2). - **/ -s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data; - bool link; - - DEBUGFUNC("e1000_phy_force_speed_duplex_igp"); - - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - e1000_phy_force_speed_duplex_setup(hw, &phy_data); - - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); - if (ret_val) - return ret_val; - - /* Clear Auto-Crossover to force MDI manually. IGP requires MDI - * forced whenever speed and duplex are forced. - */ - ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - - ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); - if (ret_val) - return ret_val; - - DEBUGOUT1("IGP PSCR: %X\n", phy_data); - - usec_delay(1); - - if (phy->autoneg_wait_to_complete) { - DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n"); - - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - if (ret_val) - return ret_val; - - if (!link) - DEBUGOUT("Link taking longer than expected.\n"); - - /* Try once more */ - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - } - - return ret_val; -} - -/** - * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY - * @hw: pointer to the HW structure - * - * Calls the PHY setup function to force speed and duplex. Clears the - * auto-crossover to force MDI manually. Resets the PHY to commit the - * changes. If time expires while waiting for link up, we reset the DSP. - * After reset, TX_CLK and CRS on Tx must be set. Return successful upon - * successful completion, else return corresponding error code. - **/ -s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data; - bool link; - - DEBUGFUNC("e1000_phy_force_speed_duplex_m88"); - - /* I210 and I211 devices support Auto-Crossover in forced operation. */ - if (phy->type != e1000_phy_i210) { - /* Clear Auto-Crossover to force MDI manually. M88E1000 - * requires MDI forced whenever speed and duplex are forced. - */ - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, - phy_data); - if (ret_val) - return ret_val; - } - - DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data); - - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - e1000_phy_force_speed_duplex_setup(hw, &phy_data); - - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); - if (ret_val) - return ret_val; - - /* Reset the phy to commit changes. */ - ret_val = hw->phy.ops.commit(hw); - if (ret_val) - return ret_val; - - if (phy->autoneg_wait_to_complete) { - DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n"); - - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - if (ret_val) - return ret_val; - - if (!link) { - bool reset_dsp = true; - - switch (hw->phy.id) { - case I347AT4_E_PHY_ID: - case M88E1340M_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1543_E_PHY_ID: - case I210_I_PHY_ID: - reset_dsp = false; - break; - default: - if (hw->phy.type != e1000_phy_m88) - reset_dsp = false; - break; - } - - if (!reset_dsp) { - DEBUGOUT("Link taking longer than expected.\n"); - } else { - /* We didn't get link. - * Reset the DSP and cross our fingers. - */ - ret_val = phy->ops.write_reg(hw, - M88E1000_PHY_PAGE_SELECT, - 0x001d); - if (ret_val) - return ret_val; - ret_val = e1000_phy_reset_dsp_generic(hw); - if (ret_val) - return ret_val; - } - } - - /* Try once more */ - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - if (ret_val) - return ret_val; - } - - if (hw->phy.type != e1000_phy_m88) - return E1000_SUCCESS; - - if (hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1340M_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) - return E1000_SUCCESS; - if (hw->phy.id == I210_I_PHY_ID) - return E1000_SUCCESS; - if ((hw->phy.id == M88E1543_E_PHY_ID)) - return E1000_SUCCESS; - ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - /* Resetting the phy means we need to re-force TX_CLK in the - * Extended PHY Specific Control Register to 25MHz clock from - * the reset value of 2.5MHz. - */ - phy_data |= M88E1000_EPSCR_TX_CLK_25; - ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* In addition, we must re-enable CRS on Tx for both half and full - * duplex. - */ - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - - return ret_val; -} - -/** - * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex - * @hw: pointer to the HW structure - * - * Forces the speed and duplex settings of the PHY. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - DEBUGFUNC("e1000_phy_force_speed_duplex_ife"); - - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data); - if (ret_val) - return ret_val; - - e1000_phy_force_speed_duplex_setup(hw, &data); - - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data); - if (ret_val) - return ret_val; - - /* Disable MDI-X support for 10/100 */ - ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); - if (ret_val) - return ret_val; - - data &= ~IFE_PMC_AUTO_MDIX; - data &= ~IFE_PMC_FORCE_MDIX; - - ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data); - if (ret_val) - return ret_val; - - DEBUGOUT1("IFE PMC: %X\n", data); - - usec_delay(1); - - if (phy->autoneg_wait_to_complete) { - DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n"); - - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - if (ret_val) - return ret_val; - - if (!link) - DEBUGOUT("Link taking longer than expected.\n"); - - /* Try once more */ - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; -} - -/** - * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex - * @hw: pointer to the HW structure - * @phy_ctrl: pointer to current value of PHY_CONTROL - * - * Forces speed and duplex on the PHY by doing the following: disable flow - * control, force speed/duplex on the MAC, disable auto speed detection, - * disable auto-negotiation, configure duplex, configure speed, configure - * the collision distance, write configuration to CTRL register. The - * caller must write to the PHY_CONTROL register for these settings to - * take affect. - **/ -void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 ctrl; - - DEBUGFUNC("e1000_phy_force_speed_duplex_setup"); - - /* Turn off flow control when forcing speed/duplex */ - hw->fc.current_mode = e1000_fc_none; - - /* Force speed/duplex on the mac */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ctrl &= ~E1000_CTRL_SPD_SEL; - - /* Disable Auto Speed Detection */ - ctrl &= ~E1000_CTRL_ASDE; - - /* Disable autoneg on the phy */ - *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; - - /* Forcing Full or Half Duplex? */ - if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { - ctrl &= ~E1000_CTRL_FD; - *phy_ctrl &= ~MII_CR_FULL_DUPLEX; - DEBUGOUT("Half Duplex\n"); - } else { - ctrl |= E1000_CTRL_FD; - *phy_ctrl |= MII_CR_FULL_DUPLEX; - DEBUGOUT("Full Duplex\n"); - } - - /* Forcing 10mb or 100mb? */ - if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { - ctrl |= E1000_CTRL_SPD_100; - *phy_ctrl |= MII_CR_SPEED_100; - *phy_ctrl &= ~MII_CR_SPEED_1000; - DEBUGOUT("Forcing 100mb\n"); - } else { - ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - DEBUGOUT("Forcing 10mb\n"); - } - - hw->mac.ops.config_collision_dist(hw); - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); -} - -/** - * e1000_set_d3_lplu_state_generic - Sets low power link up state for D3 - * @hw: pointer to the HW structure - * @active: boolean used to enable/disable lplu - * - * Success returns 0, Failure returns 1 - * - * The low power link up (lplu) state is set to the power management level D3 - * and SmartSpeed is disabled when active is true, else clear lplu for D3 - * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU - * is used during Dx states where the power conservation is most important. - * During driver activity, SmartSpeed should be enabled so performance is - * maintained. - **/ -s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - - DEBUGFUNC("e1000_set_d3_lplu_state_generic"); - - if (!hw->phy.ops.read_reg) - return E1000_SUCCESS; - - ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); - if (ret_val) - return ret_val; - - if (!active) { - data &= ~IGP02E1000_PM_D3_LPLU; - ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); - if (ret_val) - return ret_val; - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - return ret_val; - } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - return ret_val; - } - } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { - data |= IGP02E1000_PM_D3_LPLU; - ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); - if (ret_val) - return ret_val; - - /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - data); - } - - return ret_val; -} - -/** - * e1000_check_downshift_generic - Checks whether a downshift in speed occurred - * @hw: pointer to the HW structure - * - * Success returns 0, Failure returns 1 - * - * A downshift is detected by querying the PHY link health. - **/ -s32 e1000_check_downshift_generic(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, offset, mask; - - DEBUGFUNC("e1000_check_downshift_generic"); - - switch (phy->type) { - case e1000_phy_i210: - case e1000_phy_m88: - case e1000_phy_gg82563: - offset = M88E1000_PHY_SPEC_STATUS; - mask = M88E1000_PSSR_DOWNSHIFT; - break; - case e1000_phy_igp_2: - case e1000_phy_igp_3: - offset = IGP01E1000_PHY_LINK_HEALTH; - mask = IGP01E1000_PLHR_SS_DOWNGRADE; - break; - default: - /* speed downshift not supported */ - phy->speed_downgraded = false; - return E1000_SUCCESS; - } - - ret_val = phy->ops.read_reg(hw, offset, &phy_data); - - if (!ret_val) - phy->speed_downgraded = !!(phy_data & mask); - - return ret_val; -} - -/** - * e1000_check_polarity_m88 - Checks the polarity. - * @hw: pointer to the HW structure - * - * Success returns 0, Failure returns -E1000_ERR_PHY (-2) - * - * Polarity is determined based on the PHY specific status register. - **/ -s32 e1000_check_polarity_m88(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - - DEBUGFUNC("e1000_check_polarity_m88"); - - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data); - - if (!ret_val) - phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal); - - return ret_val; -} - -/** - * e1000_check_polarity_igp - Checks the polarity. - * @hw: pointer to the HW structure - * - * Success returns 0, Failure returns -E1000_ERR_PHY (-2) - * - * Polarity is determined based on the PHY port status register, and the - * current speed (since there is no polarity at 100Mbps). - **/ -s32 e1000_check_polarity_igp(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data, offset, mask; - - DEBUGFUNC("e1000_check_polarity_igp"); - - /* Polarity is determined based on the speed of - * our connection. - */ - ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); - if (ret_val) - return ret_val; - - if ((data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) { - offset = IGP01E1000_PHY_PCS_INIT_REG; - mask = IGP01E1000_PHY_POLARITY_MASK; - } else { - /* This really only applies to 10Mbps since - * there is no polarity for 100Mbps (always 0). - */ - offset = IGP01E1000_PHY_PORT_STATUS; - mask = IGP01E1000_PSSR_POLARITY_REVERSED; - } - - ret_val = phy->ops.read_reg(hw, offset, &data); - - if (!ret_val) - phy->cable_polarity = ((data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal); - - return ret_val; -} - -/** - * e1000_check_polarity_ife - Check cable polarity for IFE PHY - * @hw: pointer to the HW structure - * - * Polarity is determined on the polarity reversal feature being enabled. - **/ -s32 e1000_check_polarity_ife(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, offset, mask; - - DEBUGFUNC("e1000_check_polarity_ife"); - - /* Polarity is determined based on the reversal feature being enabled. - */ - if (phy->polarity_correction) { - offset = IFE_PHY_EXTENDED_STATUS_CONTROL; - mask = IFE_PESC_POLARITY_REVERSED; - } else { - offset = IFE_PHY_SPECIAL_CONTROL; - mask = IFE_PSC_FORCE_POLARITY; - } - - ret_val = phy->ops.read_reg(hw, offset, &phy_data); - - if (!ret_val) - phy->cable_polarity = ((phy_data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal); - - return ret_val; -} - -/** - * e1000_wait_autoneg - Wait for auto-neg completion - * @hw: pointer to the HW structure - * - * Waits for auto-negotiation to complete or for the auto-negotiation time - * limit to expire, which ever happens first. - **/ -static s32 e1000_wait_autoneg(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 i, phy_status; - - DEBUGFUNC("e1000_wait_autoneg"); - - if (!hw->phy.ops.read_reg) - return E1000_SUCCESS; - - /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ - for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; - if (phy_status & MII_SR_AUTONEG_COMPLETE) - break; - msec_delay(100); - } - - /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation - * has completed. - */ - return ret_val; -} - -/** - * e1000_phy_has_link_generic - Polls PHY for link - * @hw: pointer to the HW structure - * @iterations: number of times to poll for link - * @usec_interval: delay between polling attempts - * @success: pointer to whether polling was successful or not - * - * Polls the PHY status register for link, 'iterations' number of times. - **/ -s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success) -{ - s32 ret_val = E1000_SUCCESS; - u16 i, phy_status; - - DEBUGFUNC("e1000_phy_has_link_generic"); - - if (!hw->phy.ops.read_reg) - return E1000_SUCCESS; - - for (i = 0; i < iterations; i++) { - /* Some PHYs require the PHY_STATUS register to be read - * twice due to the link bit being sticky. No harm doing - * it across the board. - */ - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - /* If the first read fails, another entity may have - * ownership of the resources, wait and try again to - * see if they have relinquished the resources yet. - */ - usec_delay(usec_interval); - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; - if (phy_status & MII_SR_LINK_STATUS) - break; - if (usec_interval >= 1000) - msec_delay_irq(usec_interval/1000); - else - usec_delay(usec_interval); - } - - *success = (i < iterations); - - return ret_val; -} - -/** - * e1000_get_cable_length_m88 - Determine cable length for m88 PHY - * @hw: pointer to the HW structure - * - * Reads the PHY specific status register to retrieve the cable length - * information. The cable length is determined by averaging the minimum and - * maximum values to get the "average" cable length. The m88 PHY has four - * possible cable length values, which are: - * Register Value Cable Length - * 0 < 50 meters - * 1 50 - 80 meters - * 2 80 - 110 meters - * 3 110 - 140 meters - * 4 > 140 meters - **/ -s32 e1000_get_cable_length_m88(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, index; - - DEBUGFUNC("e1000_get_cable_length_m88"); - - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if (ret_val) - return ret_val; - - index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT); - - if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) - return -E1000_ERR_PHY; - - phy->min_cable_length = e1000_m88_cable_length_table[index]; - phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; - - phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; - - return E1000_SUCCESS; -} - -s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, phy_data2, is_cm; - u16 index, default_page; - - DEBUGFUNC("e1000_get_cable_length_m88_gen2"); - - switch (hw->phy.id) { - case I210_I_PHY_ID: - /* Get cable length from PHY Cable Diagnostics Control Reg */ - ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + - (I347AT4_PCDL + phy->addr), - &phy_data); - if (ret_val) - return ret_val; - - /* Check if the unit of cable length is meters or cm */ - ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + - I347AT4_PCDC, &phy_data2); - if (ret_val) - return ret_val; - - is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); - - /* Populate the phy structure with cable length in meters */ - phy->min_cable_length = phy_data / (is_cm ? 100 : 1); - phy->max_cable_length = phy_data / (is_cm ? 100 : 1); - phy->cable_length = phy_data / (is_cm ? 100 : 1); - break; - case M88E1543_E_PHY_ID: - case M88E1340M_E_PHY_ID: - case I347AT4_E_PHY_ID: - /* Remember the original page select and set it to 7 */ - ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, - &default_page); - if (ret_val) - return ret_val; - - ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); - if (ret_val) - return ret_val; - - /* Get cable length from PHY Cable Diagnostics Control Reg */ - ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), - &phy_data); - if (ret_val) - return ret_val; - - /* Check if the unit of cable length is meters or cm */ - ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); - if (ret_val) - return ret_val; - - is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); - - /* Populate the phy structure with cable length in meters */ - phy->min_cable_length = phy_data / (is_cm ? 100 : 1); - phy->max_cable_length = phy_data / (is_cm ? 100 : 1); - phy->cable_length = phy_data / (is_cm ? 100 : 1); - - /* Reset the page select to its original value */ - ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, - default_page); - if (ret_val) - return ret_val; - break; - - case M88E1112_E_PHY_ID: - /* Remember the original page select and set it to 5 */ - ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, - &default_page); - if (ret_val) - return ret_val; - - ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE, - &phy_data); - if (ret_val) - return ret_val; - - index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT; - - if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) - return -E1000_ERR_PHY; - - phy->min_cable_length = e1000_m88_cable_length_table[index]; - phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; - - phy->cable_length = (phy->min_cable_length + - phy->max_cable_length) / 2; - - /* Reset the page select to its original value */ - ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, - default_page); - if (ret_val) - return ret_val; - - break; - default: - return -E1000_ERR_PHY; - } - - return ret_val; -} - -/** - * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY - * @hw: pointer to the HW structure - * - * The automatic gain control (agc) normalizes the amplitude of the - * received signal, adjusting for the attenuation produced by the - * cable. By reading the AGC registers, which represent the - * combination of coarse and fine gain value, the value can be put - * into a lookup table to obtain the approximate cable length - * for each channel. - **/ -s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, i, agc_value = 0; - u16 cur_agc_index, max_agc_index = 0; - u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; - static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { - IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D - }; - - DEBUGFUNC("e1000_get_cable_length_igp_2"); - - /* Read the AGC registers for all channels */ - for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { - ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data); - if (ret_val) - return ret_val; - - /* Getting bits 15:9, which represent the combination of - * coarse and fine gain values. The result is a number - * that can be put into the lookup table to obtain the - * approximate cable length. - */ - cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & - IGP02E1000_AGC_LENGTH_MASK); - - /* Array index bound check. */ - if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || - (cur_agc_index == 0)) - return -E1000_ERR_PHY; - - /* Remove min & max AGC values from calculation. */ - if (e1000_igp_2_cable_length_table[min_agc_index] > - e1000_igp_2_cable_length_table[cur_agc_index]) - min_agc_index = cur_agc_index; - if (e1000_igp_2_cable_length_table[max_agc_index] < - e1000_igp_2_cable_length_table[cur_agc_index]) - max_agc_index = cur_agc_index; - - agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; - } - - agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + - e1000_igp_2_cable_length_table[max_agc_index]); - agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); - - /* Calculate cable length with the error range of +/- 10 meters. */ - phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ? - (agc_value - IGP02E1000_AGC_RANGE) : 0); - phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; - - phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; - - return E1000_SUCCESS; -} - -/** - * e1000_get_phy_info_m88 - Retrieve PHY information - * @hw: pointer to the HW structure - * - * Valid for only copper links. Read the PHY status register (sticky read) - * to verify that link is up. Read the PHY special control register to - * determine the polarity and 10base-T extended distance. Read the PHY - * special status register to determine MDI/MDIx and current speed. If - * speed is 1000, then determine cable length, local and remote receiver. - **/ -s32 e1000_get_phy_info_m88(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data; - bool link; - - DEBUGFUNC("e1000_get_phy_info_m88"); - - if (phy->media_type != e1000_media_type_copper) { - DEBUGOUT("Phy info is only valid for copper media\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) { - DEBUGOUT("Phy info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy->polarity_correction = !!(phy_data & - M88E1000_PSCR_POLARITY_REVERSAL); - - ret_val = e1000_check_polarity_m88(hw); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); - - if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { - ret_val = hw->phy.ops.get_cable_length(hw); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; - - phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; - } else { - /* Set values to "undefined" */ - phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; - phy->local_rx = e1000_1000t_rx_status_undefined; - phy->remote_rx = e1000_1000t_rx_status_undefined; - } - - return ret_val; -} - -/** - * e1000_get_phy_info_igp - Retrieve igp PHY information - * @hw: pointer to the HW structure - * - * Read PHY status to determine if link is up. If link is up, then - * set/determine 10base-T extended distance and polarity correction. Read - * PHY port status to determine MDI/MDIx and speed. Based on the speed, - * determine on the cable length, local and remote receiver. - **/ -s32 e1000_get_phy_info_igp(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - DEBUGFUNC("e1000_get_phy_info_igp"); - - ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) { - DEBUGOUT("Phy info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - phy->polarity_correction = true; - - ret_val = e1000_check_polarity_igp(hw); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); - if (ret_val) - return ret_val; - - phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX); - - if ((data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) { - ret_val = phy->ops.get_cable_length(hw); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); - if (ret_val) - return ret_val; - - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; - - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; - } else { - phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; - phy->local_rx = e1000_1000t_rx_status_undefined; - phy->remote_rx = e1000_1000t_rx_status_undefined; - } - - return ret_val; -} - -/** - * e1000_get_phy_info_ife - Retrieves various IFE PHY states - * @hw: pointer to the HW structure - * - * Populates "phy" structure with various feature states. - **/ -s32 e1000_get_phy_info_ife(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - DEBUGFUNC("e1000_get_phy_info_ife"); - - ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) { - DEBUGOUT("Phy info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data); - if (ret_val) - return ret_val; - phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE); - - if (phy->polarity_correction) { - ret_val = e1000_check_polarity_ife(hw); - if (ret_val) - return ret_val; - } else { - /* Polarity is forced */ - phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal); - } - - ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); - if (ret_val) - return ret_val; - - phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS); - - /* The following parameters are undefined for 10/100 operation. */ - phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; - phy->local_rx = e1000_1000t_rx_status_undefined; - phy->remote_rx = e1000_1000t_rx_status_undefined; - - return E1000_SUCCESS; -} - -/** - * e1000_phy_sw_reset_generic - PHY software reset - * @hw: pointer to the HW structure - * - * Does a software reset of the PHY by reading the PHY control register and - * setting/write the control register reset bit to the PHY. - **/ -s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw) -{ - s32 ret_val; - u16 phy_ctrl; - - DEBUGFUNC("e1000_phy_sw_reset_generic"); - - if (!hw->phy.ops.read_reg) - return E1000_SUCCESS; - - ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); - if (ret_val) - return ret_val; - - phy_ctrl |= MII_CR_RESET; - ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl); - if (ret_val) - return ret_val; - - usec_delay(1); - - return ret_val; -} - -/** - * e1000_phy_hw_reset_generic - PHY hardware reset - * @hw: pointer to the HW structure - * - * Verify the reset block is not blocking us from resetting. Acquire - * semaphore (if necessary) and read/set/write the device control reset - * bit in the PHY. Wait the appropriate delay time for the device to - * reset and release the semaphore (if necessary). - **/ -s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u32 ctrl; - - DEBUGFUNC("e1000_phy_hw_reset_generic"); - - if (phy->ops.check_reset_block) { - ret_val = phy->ops.check_reset_block(hw); - if (ret_val) - return E1000_SUCCESS; - } - - ret_val = phy->ops.acquire(hw); - if (ret_val) - return ret_val; - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PHY_RST); - E1000_WRITE_FLUSH(hw); - - usec_delay(phy->reset_delay_us); - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - E1000_WRITE_FLUSH(hw); - - usec_delay(150); - - phy->ops.release(hw); - - return phy->ops.get_cfg_done(hw); -} - -/** - * e1000_get_cfg_done_generic - Generic configuration done - * @hw: pointer to the HW structure - * - * Generic function to wait 10 milli-seconds for configuration to complete - * and return success. - **/ -s32 e1000_get_cfg_done_generic(struct e1000_hw E1000_UNUSEDARG *hw) -{ - DEBUGFUNC("e1000_get_cfg_done_generic"); - - msec_delay_irq(10); - - return E1000_SUCCESS; -} - -/** - * e1000_phy_init_script_igp3 - Inits the IGP3 PHY - * @hw: pointer to the HW structure - * - * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. - **/ -s32 e1000_phy_init_script_igp3(struct e1000_hw *hw) -{ - DEBUGOUT("Running IGP 3 PHY init script\n"); - - /* PHY init IGP 3 */ - /* Enable rise/fall, 10-mode work in class-A */ - hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018); - /* Remove all caps from Replica path filter */ - hw->phy.ops.write_reg(hw, 0x2F52, 0x0000); - /* Bias trimming for ADC, AFE and Driver (Default) */ - hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24); - /* Increase Hybrid poly bias */ - hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0); - /* Add 4% to Tx amplitude in Gig mode */ - hw->phy.ops.write_reg(hw, 0x2010, 0x10B0); - /* Disable trimming (TTT) */ - hw->phy.ops.write_reg(hw, 0x2011, 0x0000); - /* Poly DC correction to 94.6% + 2% for all channels */ - hw->phy.ops.write_reg(hw, 0x20DD, 0x249A); - /* ABS DC correction to 95.9% */ - hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3); - /* BG temp curve trim */ - hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE); - /* Increasing ADC OPAMP stage 1 currents to max */ - hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4); - /* Force 1000 ( required for enabling PHY regs configuration) */ - hw->phy.ops.write_reg(hw, 0x0000, 0x0140); - /* Set upd_freq to 6 */ - hw->phy.ops.write_reg(hw, 0x1F30, 0x1606); - /* Disable NPDFE */ - hw->phy.ops.write_reg(hw, 0x1F31, 0xB814); - /* Disable adaptive fixed FFE (Default) */ - hw->phy.ops.write_reg(hw, 0x1F35, 0x002A); - /* Enable FFE hysteresis */ - hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067); - /* Fixed FFE for short cable lengths */ - hw->phy.ops.write_reg(hw, 0x1F54, 0x0065); - /* Fixed FFE for medium cable lengths */ - hw->phy.ops.write_reg(hw, 0x1F55, 0x002A); - /* Fixed FFE for long cable lengths */ - hw->phy.ops.write_reg(hw, 0x1F56, 0x002A); - /* Enable Adaptive Clip Threshold */ - hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0); - /* AHT reset limit to 1 */ - hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF); - /* Set AHT master delay to 127 msec */ - hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC); - /* Set scan bits for AHT */ - hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF); - /* Set AHT Preset bits */ - hw->phy.ops.write_reg(hw, 0x1F79, 0x0210); - /* Change integ_factor of channel A to 3 */ - hw->phy.ops.write_reg(hw, 0x1895, 0x0003); - /* Change prop_factor of channels BCD to 8 */ - hw->phy.ops.write_reg(hw, 0x1796, 0x0008); - /* Change cg_icount + enable integbp for channels BCD */ - hw->phy.ops.write_reg(hw, 0x1798, 0xD008); - /* Change cg_icount + enable integbp + change prop_factor_master - * to 8 for channel A - */ - hw->phy.ops.write_reg(hw, 0x1898, 0xD918); - /* Disable AHT in Slave mode on channel A */ - hw->phy.ops.write_reg(hw, 0x187A, 0x0800); - /* Enable LPLU and disable AN to 1000 in non-D0a states, - * Enable SPD+B2B - */ - hw->phy.ops.write_reg(hw, 0x0019, 0x008D); - /* Enable restart AN on an1000_dis change */ - hw->phy.ops.write_reg(hw, 0x001B, 0x2080); - /* Enable wh_fifo read clock in 10/100 modes */ - hw->phy.ops.write_reg(hw, 0x0014, 0x0045); - /* Restart AN, Speed selection is 1000 */ - hw->phy.ops.write_reg(hw, 0x0000, 0x1340); - - return E1000_SUCCESS; -} - -/** - * e1000_get_phy_type_from_id - Get PHY type from id - * @phy_id: phy_id read from the phy - * - * Returns the phy type from the id. - **/ -enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id) -{ - enum e1000_phy_type phy_type = e1000_phy_unknown; - - switch (phy_id) { - case M88E1000_I_PHY_ID: - case M88E1000_E_PHY_ID: - case M88E1111_I_PHY_ID: - case M88E1011_I_PHY_ID: - case M88E1543_E_PHY_ID: - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1340M_E_PHY_ID: - phy_type = e1000_phy_m88; - break; - case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */ - phy_type = e1000_phy_igp_2; - break; - case GG82563_E_PHY_ID: - phy_type = e1000_phy_gg82563; - break; - case IGP03E1000_E_PHY_ID: - phy_type = e1000_phy_igp_3; - break; - case IFE_E_PHY_ID: - case IFE_PLUS_E_PHY_ID: - case IFE_C_E_PHY_ID: - phy_type = e1000_phy_ife; - break; - case I82580_I_PHY_ID: - phy_type = e1000_phy_82580; - break; - case I210_I_PHY_ID: - phy_type = e1000_phy_i210; - break; - default: - phy_type = e1000_phy_unknown; - break; - } - return phy_type; -} - -/** - * e1000_determine_phy_address - Determines PHY address. - * @hw: pointer to the HW structure - * - * This uses a trial and error method to loop through possible PHY - * addresses. It tests each by reading the PHY ID registers and - * checking for a match. - **/ -s32 e1000_determine_phy_address(struct e1000_hw *hw) -{ - u32 phy_addr = 0; - u32 i; - enum e1000_phy_type phy_type = e1000_phy_unknown; - - hw->phy.id = phy_type; - - for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) { - hw->phy.addr = phy_addr; - i = 0; - - do { - e1000_get_phy_id(hw); - phy_type = e1000_get_phy_type_from_id(hw->phy.id); - - /* If phy_type is valid, break - we found our - * PHY address - */ - if (phy_type != e1000_phy_unknown) - return E1000_SUCCESS; - - msec_delay(1); - i++; - } while (i < 10); - } - - return -E1000_ERR_PHY_TYPE; -} - -/** - * e1000_power_up_phy_copper - Restore copper link in case of PHY power down - * @hw: pointer to the HW structure - * - * In the case of a PHY power down to save power, or to turn off link during a - * driver unload, or wake on lan is not enabled, restore the link to previous - * settings. - **/ -void e1000_power_up_phy_copper(struct e1000_hw *hw) -{ - u16 mii_reg = 0; - u16 power_reg = 0; - - /* The PHY will retain its settings across a power down/up cycle */ - hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - if (hw->phy.type == e1000_phy_i210) { - hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); - power_reg &= ~GS40G_CS_POWER_DOWN; - hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); - } - hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); -} - -/** - * e1000_power_down_phy_copper - Restore copper link in case of PHY power down - * @hw: pointer to the HW structure - * - * In the case of a PHY power down to save power, or to turn off link during a - * driver unload, or wake on lan is not enabled, restore the link to previous - * settings. - **/ -void e1000_power_down_phy_copper(struct e1000_hw *hw) -{ - u16 mii_reg = 0; - u16 power_reg = 0; - - /* The PHY will retain its settings across a power down/up cycle */ - hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - /* i210 Phy requires an additional bit for power up/down */ - if (hw->phy.type == e1000_phy_i210) { - hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); - power_reg |= GS40G_CS_POWER_DOWN; - hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); - } - hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); - msec_delay(1); -} - -/** - * e1000_check_polarity_82577 - Checks the polarity. - * @hw: pointer to the HW structure - * - * Success returns 0, Failure returns -E1000_ERR_PHY (-2) - * - * Polarity is determined based on the PHY specific status register. - **/ -s32 e1000_check_polarity_82577(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - - DEBUGFUNC("e1000_check_polarity_82577"); - - ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); - - if (!ret_val) - phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal); - - return ret_val; -} - -/** - * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY - * @hw: pointer to the HW structure - * - * Calls the PHY setup function to force speed and duplex. - **/ -s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data; - bool link; - - DEBUGFUNC("e1000_phy_force_speed_duplex_82577"); - - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - e1000_phy_force_speed_duplex_setup(hw, &phy_data); - - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); - if (ret_val) - return ret_val; - - usec_delay(1); - - if (phy->autoneg_wait_to_complete) { - DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n"); - - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - if (ret_val) - return ret_val; - - if (!link) - DEBUGOUT("Link taking longer than expected.\n"); - - /* Try once more */ - ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); - } - - return ret_val; -} - -/** - * e1000_get_phy_info_82577 - Retrieve I82577 PHY information - * @hw: pointer to the HW structure - * - * Read PHY status to determine if link is up. If link is up, then - * set/determine 10base-T extended distance and polarity correction. Read - * PHY port status to determine MDI/MDIx and speed. Based on the speed, - * determine on the cable length, local and remote receiver. - **/ -s32 e1000_get_phy_info_82577(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - DEBUGFUNC("e1000_get_phy_info_82577"); - - ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) { - DEBUGOUT("Phy info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - phy->polarity_correction = true; - - ret_val = e1000_check_polarity_82577(hw); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); - if (ret_val) - return ret_val; - - phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX); - - if ((data & I82577_PHY_STATUS2_SPEED_MASK) == - I82577_PHY_STATUS2_SPEED_1000MBPS) { - ret_val = hw->phy.ops.get_cable_length(hw); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); - if (ret_val) - return ret_val; - - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; - - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; - } else { - phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; - phy->local_rx = e1000_1000t_rx_status_undefined; - phy->remote_rx = e1000_1000t_rx_status_undefined; - } - - return E1000_SUCCESS; -} - -/** - * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY - * @hw: pointer to the HW structure - * - * Reads the diagnostic status register and verifies result is valid before - * placing it in the phy_cable_length field. - **/ -s32 e1000_get_cable_length_82577(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, length; - - DEBUGFUNC("e1000_get_cable_length_82577"); - - ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); - if (ret_val) - return ret_val; - - length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >> - I82577_DSTATUS_CABLE_LENGTH_SHIFT); - - if (length == E1000_CABLE_LENGTH_UNDEFINED) - return -E1000_ERR_PHY; - - phy->cable_length = length; - - return E1000_SUCCESS; -} - -/** - * e1000_write_phy_reg_gs40g - Write GS40G PHY register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Acquires semaphore, if necessary, then writes the data to PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data) -{ - s32 ret_val; - u16 page = offset >> GS40G_PAGE_SHIFT; - - DEBUGFUNC("e1000_write_phy_reg_gs40g"); - - offset = offset & GS40G_OFFSET_MASK; - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); - if (ret_val) - goto release; - ret_val = e1000_write_phy_reg_mdic(hw, offset, data); - -release: - hw->phy.ops.release(hw); - return ret_val; -} - -/** - * e1000_read_phy_reg_gs40g - Read GS40G PHY register - * @hw: pointer to the HW structure - * @offset: lower half is register offset to read to - * upper half is page to use. - * @data: data to read at register offset - * - * Acquires semaphore, if necessary, then reads the data in the PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data) -{ - s32 ret_val; - u16 page = offset >> GS40G_PAGE_SHIFT; - - DEBUGFUNC("e1000_read_phy_reg_gs40g"); - - offset = offset & GS40G_OFFSET_MASK; - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); - if (ret_val) - goto release; - ret_val = e1000_read_phy_reg_mdic(hw, offset, data); - -release: - hw->phy.ops.release(hw); - return ret_val; -} - -/** - * e1000_read_phy_reg_mphy - Read mPHY control register - * @hw: pointer to the HW structure - * @address: address to be read - * @data: pointer to the read data - * - * Reads the mPHY control register in the PHY at offset and stores the - * information read to data. - **/ -s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data) -{ - u32 mphy_ctrl = 0; - bool locked = false; - bool ready = false; - - DEBUGFUNC("e1000_read_phy_reg_mphy"); - - /* Check if mPHY is ready to read/write operations */ - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - - /* Check if mPHY access is disabled and enable it if so */ - mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); - if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { - locked = true; - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - mphy_ctrl |= E1000_MPHY_ENA_ACCESS; - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); - } - - /* Set the address that we want to read */ - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - - /* We mask address, because we want to use only current lane */ - mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK & - ~E1000_MPHY_ADDRESS_FNC_OVERRIDE) | - (address & E1000_MPHY_ADDRESS_MASK); - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); - - /* Read data from the address */ - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - *data = E1000_READ_REG(hw, E1000_MPHY_DATA); - - /* Disable access to mPHY if it was originally disabled */ - if (locked) { - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, - E1000_MPHY_DIS_ACCESS); - } - - return E1000_SUCCESS; -} - -/** - * e1000_write_phy_reg_mphy - Write mPHY control register - * @hw: pointer to the HW structure - * @address: address to write to - * @data: data to write to register at offset - * @line_override: used when we want to use different line than default one - * - * Writes data to mPHY control register. - **/ -s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, - bool line_override) -{ - u32 mphy_ctrl = 0; - bool locked = false; - bool ready = false; - - DEBUGFUNC("e1000_write_phy_reg_mphy"); - - /* Check if mPHY is ready to read/write operations */ - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - - /* Check if mPHY access is disabled and enable it if so */ - mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); - if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { - locked = true; - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - mphy_ctrl |= E1000_MPHY_ENA_ACCESS; - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); - } - - /* Set the address that we want to read */ - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - - /* We mask address, because we want to use only current lane */ - if (line_override) - mphy_ctrl |= E1000_MPHY_ADDRESS_FNC_OVERRIDE; - else - mphy_ctrl &= ~E1000_MPHY_ADDRESS_FNC_OVERRIDE; - mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK) | - (address & E1000_MPHY_ADDRESS_MASK); - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); - - /* Read data from the address */ - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - E1000_WRITE_REG(hw, E1000_MPHY_DATA, data); - - /* Disable access to mPHY if it was originally disabled */ - if (locked) { - ready = e1000_is_mphy_ready(hw); - if (!ready) - return -E1000_ERR_PHY; - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, - E1000_MPHY_DIS_ACCESS); - } - - return E1000_SUCCESS; -} - -/** - * e1000_is_mphy_ready - Check if mPHY control register is not busy - * @hw: pointer to the HW structure - * - * Returns mPHY control register status. - **/ -bool e1000_is_mphy_ready(struct e1000_hw *hw) -{ - u16 retry_count = 0; - u32 mphy_ctrl = 0; - bool ready = false; - - while (retry_count < 2) { - mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); - if (mphy_ctrl & E1000_MPHY_BUSY) { - usec_delay(20); - retry_count++; - continue; - } - ready = true; - break; - } - - if (!ready) - DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n"); - - return ready; -} diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.h b/kernel/linux/kni/ethtool/igb/e1000_phy.h deleted file mode 100644 index 67e9ba777b..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_phy.h +++ /dev/null @@ -1,241 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_PHY_H_ -#define _E1000_PHY_H_ - -void e1000_init_phy_ops_generic(struct e1000_hw *hw); -s32 e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data); -void e1000_null_phy_generic(struct e1000_hw *hw); -s32 e1000_null_lplu_state(struct e1000_hw *hw, bool active); -s32 e1000_null_write_reg(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_null_set_page(struct e1000_hw *hw, u16 data); -s32 e1000_read_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data); -s32 e1000_write_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data); -s32 e1000_check_downshift_generic(struct e1000_hw *hw); -s32 e1000_check_polarity_m88(struct e1000_hw *hw); -s32 e1000_check_polarity_igp(struct e1000_hw *hw); -s32 e1000_check_polarity_ife(struct e1000_hw *hw); -s32 e1000_check_reset_block_generic(struct e1000_hw *hw); -s32 e1000_copper_link_setup_igp(struct e1000_hw *hw); -s32 e1000_copper_link_setup_m88(struct e1000_hw *hw); -s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw); -s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw); -s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw); -s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); -s32 e1000_get_cable_length_m88(struct e1000_hw *hw); -s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw); -s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw); -s32 e1000_get_cfg_done_generic(struct e1000_hw *hw); -s32 e1000_get_phy_id(struct e1000_hw *hw); -s32 e1000_get_phy_info_igp(struct e1000_hw *hw); -s32 e1000_get_phy_info_m88(struct e1000_hw *hw); -s32 e1000_get_phy_info_ife(struct e1000_hw *hw); -s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw); -void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); -s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw); -s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw); -s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); -s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active); -s32 e1000_setup_copper_link_generic(struct e1000_hw *hw); -s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success); -s32 e1000_phy_init_script_igp3(struct e1000_hw *hw); -enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id); -s32 e1000_determine_phy_address(struct e1000_hw *hw); -s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); -s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); -void e1000_power_up_phy_copper(struct e1000_hw *hw); -void e1000_power_down_phy_copper(struct e1000_hw *hw); -s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data); -s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data); -s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); -s32 e1000_check_polarity_82577(struct e1000_hw *hw); -s32 e1000_get_phy_info_82577(struct e1000_hw *hw); -s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); -s32 e1000_get_cable_length_82577(struct e1000_hw *hw); -s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data); -s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data); -s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, - bool line_override); -bool e1000_is_mphy_ready(struct e1000_hw *hw); - -#define E1000_MAX_PHY_ADDR 8 - -/* IGP01E1000 Specific Registers */ -#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ -#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ -#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ -#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ -#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ -#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ -#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ -#define IGP_PAGE_SHIFT 5 -#define PHY_REG_MASK 0x1F - -/* GS40G - I210 PHY defines */ -#define GS40G_PAGE_SELECT 0x16 -#define GS40G_PAGE_SHIFT 16 -#define GS40G_OFFSET_MASK 0xFFFF -#define GS40G_PAGE_2 0x20000 -#define GS40G_MAC_REG2 0x15 -#define GS40G_MAC_LB 0x4140 -#define GS40G_MAC_SPEED_1G 0X0006 -#define GS40G_COPPER_SPEC 0x0010 -#define GS40G_CS_POWER_DOWN 0x0002 - -#define HV_INTC_FC_PAGE_START 768 -#define I82578_ADDR_REG 29 -#define I82577_ADDR_REG 16 -#define I82577_CFG_REG 22 -#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) -#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift */ -#define I82577_CTRL_REG 23 - -/* 82577 specific PHY registers */ -#define I82577_PHY_CTRL_2 18 -#define I82577_PHY_LBK_CTRL 19 -#define I82577_PHY_STATUS_2 26 -#define I82577_PHY_DIAG_STATUS 31 - -/* I82577 PHY Status 2 */ -#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 -#define I82577_PHY_STATUS2_MDIX 0x0800 -#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 -#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 - -/* I82577 PHY Control 2 */ -#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 -#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 -#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 - -/* I82577 PHY Diagnostics Status */ -#define I82577_DSTATUS_CABLE_LENGTH 0x03FC -#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 - -/* 82580 PHY Power Management */ -#define E1000_82580_PHY_POWER_MGMT 0xE14 -#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */ -#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */ -#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */ -#define E1000_82580_PM_GO_LINKD 0x0020 /* Go Link Disconnect */ - -#define E1000_MPHY_DIS_ACCESS 0x80000000 /* disable_access bit */ -#define E1000_MPHY_ENA_ACCESS 0x40000000 /* enable_access bit */ -#define E1000_MPHY_BUSY 0x00010000 /* busy bit */ -#define E1000_MPHY_ADDRESS_FNC_OVERRIDE 0x20000000 /* fnc_override bit */ -#define E1000_MPHY_ADDRESS_MASK 0x0000FFFF /* address mask */ - -#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 -#define IGP01E1000_PHY_POLARITY_MASK 0x0078 - -#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 -#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ - -#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 - -#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ -#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ -#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ - -#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 - -#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 -#define IGP01E1000_PSSR_MDIX 0x0800 -#define IGP01E1000_PSSR_SPEED_MASK 0xC000 -#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 - -#define IGP02E1000_PHY_CHANNEL_NUM 4 -#define IGP02E1000_PHY_AGC_A 0x11B1 -#define IGP02E1000_PHY_AGC_B 0x12B1 -#define IGP02E1000_PHY_AGC_C 0x14B1 -#define IGP02E1000_PHY_AGC_D 0x18B1 - -#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course=15:13, Fine=12:9 */ -#define IGP02E1000_AGC_LENGTH_MASK 0x7F -#define IGP02E1000_AGC_RANGE 15 - -#define E1000_CABLE_LENGTH_UNDEFINED 0xFF - -#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 -#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 -#define E1000_KMRNCTRLSTA_REN 0x00200000 -#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ -#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ -#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ -#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ -#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ - -#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 -#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Ctrl */ -#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Ctrl */ -#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ - -/* IFE PHY Extended Status Control */ -#define IFE_PESC_POLARITY_REVERSED 0x0100 - -/* IFE PHY Special Control */ -#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 -#define IFE_PSC_FORCE_POLARITY 0x0020 - -/* IFE PHY Special Control and LED Control */ -#define IFE_PSCL_PROBE_MODE 0x0020 -#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ -#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ - -/* IFE PHY MDIX Control */ -#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ -#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */ - -/* SFP modules ID memory locations */ -#define E1000_SFF_IDENTIFIER_OFFSET 0x00 -#define E1000_SFF_IDENTIFIER_SFF 0x02 -#define E1000_SFF_IDENTIFIER_SFP 0x03 - -#define E1000_SFF_ETH_FLAGS_OFFSET 0x06 -/* Flags for SFP modules compatible with ETH up to 1Gb */ -struct sfp_e1000_flags { - u8 e1000_base_sx:1; - u8 e1000_base_lx:1; - u8 e1000_base_cx:1; - u8 e1000_base_t:1; - u8 e100_base_lx:1; - u8 e100_base_fx:1; - u8 e10_base_bx10:1; - u8 e10_base_px:1; -}; - -/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ -#define E1000_SFF_VENDOR_OUI_TYCO 0x00407600 -#define E1000_SFF_VENDOR_OUI_FTL 0x00906500 -#define E1000_SFF_VENDOR_OUI_AVAGO 0x00176A00 -#define E1000_SFF_VENDOR_OUI_INTEL 0x001B2100 - -#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_regs.h b/kernel/linux/kni/ethtool/igb/e1000_regs.h deleted file mode 100644 index f5c7e031a8..0000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_regs.h +++ /dev/null @@ -1,631 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _E1000_REGS_H_ -#define _E1000_REGS_H_ - -#define E1000_CTRL 0x00000 /* Device Control - RW */ -#define E1000_STATUS 0x00008 /* Device Status - RO */ -#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ -#define E1000_EERD 0x00014 /* EEPROM Read - RW */ -#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ -#define E1000_FLA 0x0001C /* Flash Access - RW */ -#define E1000_MDIC 0x00020 /* MDI Control - RW */ -#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */ -#define E1000_REGISTER_SET_SIZE 0x20000 /* CSR Size */ -#define E1000_EEPROM_INIT_CTRL_WORD_2 0x0F /* EEPROM Init Ctrl Word 2 */ -#define E1000_EEPROM_PCIE_CTRL_WORD_2 0x28 /* EEPROM PCIe Ctrl Word 2 */ -#define E1000_BARCTRL 0x5BBC /* BAR ctrl reg */ -#define E1000_BARCTRL_FLSIZE 0x0700 /* BAR ctrl Flsize */ -#define E1000_BARCTRL_CSRSIZE 0x2000 /* BAR ctrl CSR size */ -#define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */ -#define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */ -#define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */ -#define E1000_PPHY_CTRL 0x5b48 /* PCIe PHY Control */ -#define E1000_I350_BARCTRL 0x5BFC /* BAR ctrl reg */ -#define E1000_I350_DTXMXPKTSZ 0x355C /* Maximum sent packet size reg*/ -#define E1000_SCTL 0x00024 /* SerDes Control - RW */ -#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ -#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ -#define E1000_FCT 0x00030 /* Flow Control Type - RW */ -#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ -#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ -#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ -#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ -#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ -#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ -#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ -#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ -#define E1000_RCTL 0x00100 /* Rx Control - RW */ -#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ -#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ -#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ -#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ -#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) -#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ -#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ -#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ -#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ -#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ -#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ -#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ -#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ -#define E1000_TCTL 0x00400 /* Tx Control - RW */ -#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ -#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ -#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ -#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ -#define E1000_LEDMUX 0x08130 /* LED MUX Control */ -#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ -#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ -#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ -#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ -#define E1000_PBS 0x01008 /* Packet Buffer Size */ -#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ -#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ -#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ -#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ -#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ -#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ -#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ -#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ -#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ -#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */ -#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ -#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ -#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ -#define E1000_I2C_CLK_STRETCH_DIS 0x00008000 /* I2C- Dis Clk Stretching */ -#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */ -#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */ -#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ -#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */ -#define E1000_VPDDIAG 0x01060 /* VPD Diagnostic - RO */ -#define E1000_ICR_V2 0x01500 /* Intr Cause - new location - RC */ -#define E1000_ICS_V2 0x01504 /* Intr Cause Set - new location - WO */ -#define E1000_IMS_V2 0x01508 /* Intr Mask Set/Read - new location - RW */ -#define E1000_IMC_V2 0x0150C /* Intr Mask Clear - new location - WO */ -#define E1000_IAM_V2 0x01510 /* Intr Ack Auto Mask - new location - RW */ -#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ -#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ -#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ -#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ -#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ -#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ -#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ -#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ -#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ -#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */ -#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ -/* Split and Replication Rx Control - RW */ -#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */ -#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */ -#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */ -#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */ -#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */ -#define E1000_PBDIAG 0x02458 /* Packet Buffer Diagnostic - RW */ -#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ -#define E1000_IRPBS 0x02404 /* Same as RXPBS, renamed for newer Si - RW */ -#define E1000_PBRWAC 0x024E8 /* Rx packet buffer wrap around counter - RO */ -#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ -#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ -#define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */ -#define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */ -#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */ -#define E1000_I210_FLMNGCTL 0x12038 -#define E1000_I210_FLMNGDATA 0x1203C -#define E1000_I210_FLMNGCNT 0x12040 - -#define E1000_I210_FLSWCTL 0x12048 -#define E1000_I210_FLSWDATA 0x1204C -#define E1000_I210_FLSWCNT 0x12050 - -#define E1000_I210_FLA 0x1201C - -#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n)) -#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */ - -/* QAV Tx mode control register */ -#define E1000_I210_TQAVCTRL 0x3570 - -/* QAV Tx mode control register bitfields masks */ -/* QAV enable */ -#define E1000_TQAVCTRL_MODE (1 << 0) -/* Fetching arbitration type */ -#define E1000_TQAVCTRL_FETCH_ARB (1 << 4) -/* Fetching timer enable */ -#define E1000_TQAVCTRL_FETCH_TIMER_ENABLE (1 << 5) -/* Launch arbitration type */ -#define E1000_TQAVCTRL_LAUNCH_ARB (1 << 8) -/* Launch timer enable */ -#define E1000_TQAVCTRL_LAUNCH_TIMER_ENABLE (1 << 9) -/* SP waits for SR enable */ -#define E1000_TQAVCTRL_SP_WAIT_SR (1 << 10) -/* Fetching timer correction */ -#define E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET 16 -#define E1000_TQAVCTRL_FETCH_TIMER_DELTA \ - (0xFFFF << E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET) - -/* High credit registers where _n can be 0 or 1. */ -#define E1000_I210_TQAVHC(_n) (0x300C + 0x40 * (_n)) - -/* Queues fetch arbitration priority control register */ -#define E1000_I210_TQAVARBCTRL 0x3574 -/* Queues priority masks where _n and _p can be 0-3. */ -#define E1000_TQAVARBCTRL_QUEUE_PRI(_n, _p) ((_p) << (2 * _n)) -/* QAV Tx mode control registers where _n can be 0 or 1. */ -#define E1000_I210_TQAVCC(_n) (0x3004 + 0x40 * (_n)) - -/* QAV Tx mode control register bitfields masks */ -#define E1000_TQAVCC_IDLE_SLOPE 0xFFFF /* Idle slope */ -#define E1000_TQAVCC_KEEP_CREDITS (1 << 30) /* Keep credits opt enable */ -#define E1000_TQAVCC_QUEUE_MODE (1 << 31) /* SP vs. SR Tx mode */ - -/* Good transmitted packets counter registers */ -#define E1000_PQGPTC(_n) (0x010014 + (0x100 * (_n))) - -/* Queues packet buffer size masks where _n can be 0-3 and _s 0-63 [kB] */ -#define E1000_I210_TXPBS_SIZE(_n, _s) ((_s) << (6 * _n)) - -#define E1000_MMDAC 13 /* MMD Access Control */ -#define E1000_MMDAAD 14 /* MMD Access Address/Data */ - -/* Convenience macros - * - * Note: "_n" is the queue number of the register to be written to. - * - * Example usage: - * E1000_RDBAL_REG(current_rx_queue) - */ -#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ - (0x0C000 + ((_n) * 0x40))) -#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ - (0x0C004 + ((_n) * 0x40))) -#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ - (0x0C008 + ((_n) * 0x40))) -#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ - (0x0C00C + ((_n) * 0x40))) -#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ - (0x0C010 + ((_n) * 0x40))) -#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ - (0x0C014 + ((_n) * 0x40))) -#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) -#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ - (0x0C018 + ((_n) * 0x40))) -#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ - (0x0C028 + ((_n) * 0x40))) -#define E1000_RQDPC(_n) ((_n) < 4 ? (0x02830 + ((_n) * 0x100)) : \ - (0x0C030 + ((_n) * 0x40))) -#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ - (0x0E000 + ((_n) * 0x40))) -#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ - (0x0E004 + ((_n) * 0x40))) -#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ - (0x0E008 + ((_n) * 0x40))) -#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ - (0x0E010 + ((_n) * 0x40))) -#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ - (0x0E014 + ((_n) * 0x40))) -#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n) -#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ - (0x0E018 + ((_n) * 0x40))) -#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ - (0x0E028 + ((_n) * 0x40))) -#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \ - (0x0E038 + ((_n) * 0x40))) -#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \ - (0x0E03C + ((_n) * 0x40))) -#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) -#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */ -#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ -#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ -#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4)) -#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ - (0x054E0 + ((_i - 16) * 8))) -#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ - (0x054E4 + ((_i - 16) * 8))) -#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) -#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) -#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8)) -#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4)) -#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4)) -#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8)) -#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8)) -#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8)) -#define E1000_PBSLAC 0x03100 /* Pkt Buffer Slave Access Control */ -#define E1000_PBSLAD(_n) (0x03110 + (0x4 * (_n))) /* Pkt Buffer DWORD */ -#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */ -/* Same as TXPBS, renamed for newer Si - RW */ -#define E1000_ITPBS 0x03404 -#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ -#define E1000_TDPUMB 0x0357C /* DMA Tx Desc uC Mail Box - RW */ -#define E1000_TDPUAD 0x03580 /* DMA Tx Desc uC Addr Command - RW */ -#define E1000_TDPUWD 0x03584 /* DMA Tx Desc uC Data Write - RW */ -#define E1000_TDPURD 0x03588 /* DMA Tx Desc uC Data Read - RW */ -#define E1000_TDPUCTL 0x0358C /* DMA Tx Desc uC Control - RW */ -#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */ -#define E1000_DTXTCPFLGL 0x0359C /* DMA Tx Control flag low - RW */ -#define E1000_DTXTCPFLGH 0x035A0 /* DMA Tx Control flag high - RW */ -/* DMA Tx Max Total Allow Size Reqs - RW */ -#define E1000_DTXMXSZRQ 0x03540 -#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ -#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ -#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ -#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ -#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ -#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ -#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ -#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ -#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ -#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ -#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ -#define E1000_COLC 0x04028 /* Collision Count - R/clr */ -#define E1000_DC 0x04030 /* Defer Count - R/clr */ -#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ -#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ -#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ -#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ -#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ -#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ -#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ -#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ -#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ -#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ -#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ -#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ -#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ -#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ -#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ -#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ -#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ -#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ -#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ -#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ -#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ -#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ -#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ -#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ -#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ -#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ -#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ -#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ -#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ -#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ -#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ -#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ -#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ -#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ -#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ -#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ -#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ -#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ -#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ -#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ -#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ -#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ -#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ -#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ -#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ -#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ -#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ -#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ -#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ -#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ -#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ -#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ -#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ -#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ -#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ -#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ - -/* Virtualization statistical counters */ -#define E1000_PFVFGPRC(_n) (0x010010 + (0x100 * (_n))) -#define E1000_PFVFGPTC(_n) (0x010014 + (0x100 * (_n))) -#define E1000_PFVFGORC(_n) (0x010018 + (0x100 * (_n))) -#define E1000_PFVFGOTC(_n) (0x010034 + (0x100 * (_n))) -#define E1000_PFVFMPRC(_n) (0x010038 + (0x100 * (_n))) -#define E1000_PFVFGPRLBC(_n) (0x010040 + (0x100 * (_n))) -#define E1000_PFVFGPTLBC(_n) (0x010044 + (0x100 * (_n))) -#define E1000_PFVFGORLBC(_n) (0x010048 + (0x100 * (_n))) -#define E1000_PFVFGOTLBC(_n) (0x010050 + (0x100 * (_n))) - -/* LinkSec */ -#define E1000_LSECTXUT 0x04300 /* Tx Untagged Pkt Cnt */ -#define E1000_LSECTXPKTE 0x04304 /* Encrypted Tx Pkts Cnt */ -#define E1000_LSECTXPKTP 0x04308 /* Protected Tx Pkt Cnt */ -#define E1000_LSECTXOCTE 0x0430C /* Encrypted Tx Octets Cnt */ -#define E1000_LSECTXOCTP 0x04310 /* Protected Tx Octets Cnt */ -#define E1000_LSECRXUT 0x04314 /* Untagged non-Strict Rx Pkt Cnt */ -#define E1000_LSECRXOCTD 0x0431C /* Rx Octets Decrypted Count */ -#define E1000_LSECRXOCTV 0x04320 /* Rx Octets Validated */ -#define E1000_LSECRXBAD 0x04324 /* Rx Bad Tag */ -#define E1000_LSECRXNOSCI 0x04328 /* Rx Packet No SCI Count */ -#define E1000_LSECRXUNSCI 0x0432C /* Rx Packet Unknown SCI Count */ -#define E1000_LSECRXUNCH 0x04330 /* Rx Unchecked Packets Count */ -#define E1000_LSECRXDELAY 0x04340 /* Rx Delayed Packet Count */ -#define E1000_LSECRXLATE 0x04350 /* Rx Late Packets Count */ -#define E1000_LSECRXOK(_n) (0x04360 + (0x04 * (_n))) /* Rx Pkt OK Cnt */ -#define E1000_LSECRXINV(_n) (0x04380 + (0x04 * (_n))) /* Rx Invalid Cnt */ -#define E1000_LSECRXNV(_n) (0x043A0 + (0x04 * (_n))) /* Rx Not Valid Cnt */ -#define E1000_LSECRXUNSA 0x043C0 /* Rx Unused SA Count */ -#define E1000_LSECRXNUSA 0x043D0 /* Rx Not Using SA Count */ -#define E1000_LSECTXCAP 0x0B000 /* Tx Capabilities Register - RO */ -#define E1000_LSECRXCAP 0x0B300 /* Rx Capabilities Register - RO */ -#define E1000_LSECTXCTRL 0x0B004 /* Tx Control - RW */ -#define E1000_LSECRXCTRL 0x0B304 /* Rx Control - RW */ -#define E1000_LSECTXSCL 0x0B008 /* Tx SCI Low - RW */ -#define E1000_LSECTXSCH 0x0B00C /* Tx SCI High - RW */ -#define E1000_LSECTXSA 0x0B010 /* Tx SA0 - RW */ -#define E1000_LSECTXPN0 0x0B018 /* Tx SA PN 0 - RW */ -#define E1000_LSECTXPN1 0x0B01C /* Tx SA PN 1 - RW */ -#define E1000_LSECRXSCL 0x0B3D0 /* Rx SCI Low - RW */ -#define E1000_LSECRXSCH 0x0B3E0 /* Rx SCI High - RW */ -/* LinkSec Tx 128-bit Key 0 - WO */ -#define E1000_LSECTXKEY0(_n) (0x0B020 + (0x04 * (_n))) -/* LinkSec Tx 128-bit Key 1 - WO */ -#define E1000_LSECTXKEY1(_n) (0x0B030 + (0x04 * (_n))) -#define E1000_LSECRXSA(_n) (0x0B310 + (0x04 * (_n))) /* Rx SAs - RW */ -#define E1000_LSECRXPN(_n) (0x0B330 + (0x04 * (_n))) /* Rx SAs - RW */ -/* LinkSec Rx Keys - where _n is the SA no. and _m the 4 dwords of the 128 bit - * key - RW. - */ -#define E1000_LSECRXKEY(_n, _m) (0x0B350 + (0x10 * (_n)) + (0x04 * (_m))) - -#define E1000_SSVPC 0x041A0 /* Switch Security Violation Pkt Cnt */ -#define E1000_IPSCTRL 0xB430 /* IpSec Control Register */ -#define E1000_IPSRXCMD 0x0B408 /* IPSec Rx Command Register - RW */ -#define E1000_IPSRXIDX 0x0B400 /* IPSec Rx Index - RW */ -/* IPSec Rx IPv4/v6 Address - RW */ -#define E1000_IPSRXIPADDR(_n) (0x0B420 + (0x04 * (_n))) -/* IPSec Rx 128-bit Key - RW */ -#define E1000_IPSRXKEY(_n) (0x0B410 + (0x04 * (_n))) -#define E1000_IPSRXSALT 0x0B404 /* IPSec Rx Salt - RW */ -#define E1000_IPSRXSPI 0x0B40C /* IPSec Rx SPI - RW */ -/* IPSec Tx 128-bit Key - RW */ -#define E1000_IPSTXKEY(_n) (0x0B460 + (0x04 * (_n))) -#define E1000_IPSTXSALT 0x0B454 /* IPSec Tx Salt - RW */ -#define E1000_IPSTXIDX 0x0B450 /* IPSec Tx SA IDX - RW */ -#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */ -#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ -#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ -#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */ -#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */ -#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */ -#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */ -#define E1000_RPTHC 0x04104 /* Rx Packets To Host */ -#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */ -#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */ -#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */ -#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */ -#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */ -#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */ -#define E1000_LENERRS 0x04138 /* Length Errors Count */ -#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */ -#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */ -#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ -#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ -#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */ -#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Pg - RW */ -#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ -#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */ -#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ -#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ -#define E1000_RA 0x05400 /* Receive Address - RW Array */ -#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */ -#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ -#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */ -#define E1000_CIAA 0x05B88 /* Config Indirect Access Address - RW */ -#define E1000_CIAD 0x05B8C /* Config Indirect Access Data - RW */ -#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */ -#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */ -#define E1000_WUC 0x05800 /* Wakeup Control - RW */ -#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ -#define E1000_WUS 0x05810 /* Wakeup Status - RO */ -#define E1000_MANC 0x05820 /* Management Control - RW */ -#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ -#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ -#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ -#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ -#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ -#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */ -#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ -#define E1000_HOST_IF 0x08800 /* Host Interface */ -#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ -#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ -#define E1000_HIBBA 0x8F40 /* Host Interface Buffer Base Address */ -/* Flexible Host Filter Table */ -#define E1000_FHFT(_n) (0x09000 + ((_n) * 0x100)) -/* Ext Flexible Host Filter Table */ -#define E1000_FHFT_EXT(_n) (0x09A00 + ((_n) * 0x100)) - - -#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ -#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ -/* Management Decision Filters */ -#define E1000_MDEF(_n) (0x05890 + (4 * (_n))) -#define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */ -#define E1000_CCMCTL 0x05B48 /* CCM Control Register */ -#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ -#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ -#define E1000_GCR 0x05B00 /* PCI-Ex Control */ -#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ -#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ -#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ -#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ -#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ -#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ -#define E1000_SWSM 0x05B50 /* SW Semaphore */ -#define E1000_FWSM 0x05B54 /* FW Semaphore */ -/* Driver-only SW semaphore (not used by BOOT agents) */ -#define E1000_SWSM2 0x05B58 -#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */ -#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */ -#define E1000_UFUSE 0x05B78 /* UFUSE - RO */ -#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ -#define E1000_HICR 0x08F00 /* Host Interface Control */ -#define E1000_FWSTS 0x08F0C /* FW Status */ - -/* RSS registers */ -#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ -#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ -#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */ -#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate INTR Ext*/ -#define E1000_IMIRVP 0x05AC0 /* Immediate INT Rx VLAN Priority -RW */ -#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Alloc Reg -RW */ -#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ -#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ -#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ -#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ -/* VT Registers */ -#define E1000_SWPBS 0x03004 /* Switch Packet Buffer Size - RW */ -#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */ -#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */ -#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */ -#define E1000_VFRE 0x00C8C /* VF Receive Enables */ -#define E1000_VFTE 0x00C90 /* VF Transmit Enables */ -#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */ -#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */ -#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */ -#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */ -#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */ -#define E1000_IOVTCL 0x05BBC /* IOV Control Register */ -#define E1000_VMRCTL 0X05D80 /* Virtual Mirror Rule Control */ -#define E1000_VMRVLAN 0x05D90 /* Virtual Mirror Rule VLAN */ -#define E1000_VMRVM 0x05DA0 /* Virtual Mirror Rule VM */ -#define E1000_MDFB 0x03558 /* Malicious Driver free block */ -#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */ -#define E1000_TXSWC 0x05ACC /* Tx Switch Control */ -#define E1000_SCCRL 0x05DB0 /* Storm Control Control */ -#define E1000_BSCTRH 0x05DB8 /* Broadcast Storm Control Threshold */ -#define E1000_MSCTRH 0x05DBC /* Multicast Storm Control Threshold */ -/* These act per VF so an array friendly macro is used */ -#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n))) -#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n))) -#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n))) -#define E1000_VFVMBMEM(_n) (0x00800 + (_n)) -#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n))) -/* VLAN Virtual Machine Filter - RW */ -#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) -#define E1000_VMVIR(_n) (0x03700 + (4 * (_n))) -#define E1000_DVMOLR(_n) (0x0C038 + (0x40 * (_n))) /* DMA VM offload */ -#define E1000_VTCTRL(_n) (0x10000 + (0x100 * (_n))) /* VT Control */ -#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ -#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ -#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */ -#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ -#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ -#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */ -#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */ -#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ -#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ -#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ -#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ -#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ -#define E1000_TIMADJL 0x0B60C /* Time sync time adjustment offset Low - RW */ -#define E1000_TIMADJH 0x0B610 /* Time sync time adjustment offset High - RW */ -#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */ -#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */ -#define E1000_TSICR 0x0B66C /* Interrupt Cause Register */ -#define E1000_TSIM 0x0B674 /* Interrupt Mask Register */ - -/* Filtering Registers */ -#define E1000_SAQF(_n) (0x05980 + (4 * (_n))) /* Source Address Queue Fltr */ -#define E1000_DAQF(_n) (0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */ -#define E1000_SPQF(_n) (0x059C0 + (4 * (_n))) /* Source Port Queue Fltr */ -#define E1000_FTQF(_n) (0x059E0 + (4 * (_n))) /* 5-tuple Queue Fltr */ -#define E1000_TTQF(_n) (0x059E0 + (4 * (_n))) /* 2-tuple Queue Fltr */ -#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ -#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ - -#define E1000_RTTDCS 0x3600 /* Reedtown Tx Desc plane control and status */ -#define E1000_RTTPCS 0x3474 /* Reedtown Tx Packet Plane control and status */ -#define E1000_RTRPCS 0x2474 /* Rx packet plane control and status */ -#define E1000_RTRUP2TC 0x05AC4 /* Rx User Priority to Traffic Class */ -#define E1000_RTTUP2TC 0x0418 /* Transmit User Priority to Traffic Class */ -/* Tx Desc plane TC Rate-scheduler config */ -#define E1000_RTTDTCRC(_n) (0x3610 + ((_n) * 4)) -/* Tx Packet plane TC Rate-Scheduler Config */ -#define E1000_RTTPTCRC(_n) (0x3480 + ((_n) * 4)) -/* Rx Packet plane TC Rate-Scheduler Config */ -#define E1000_RTRPTCRC(_n) (0x2480 + ((_n) * 4)) -/* Tx Desc Plane TC Rate-Scheduler Status */ -#define E1000_RTTDTCRS(_n) (0x3630 + ((_n) * 4)) -/* Tx Desc Plane TC Rate-Scheduler MMW */ -#define E1000_RTTDTCRM(_n) (0x3650 + ((_n) * 4)) -/* Tx Packet plane TC Rate-Scheduler Status */ -#define E1000_RTTPTCRS(_n) (0x34A0 + ((_n) * 4)) -/* Tx Packet plane TC Rate-scheduler MMW */ -#define E1000_RTTPTCRM(_n) (0x34C0 + ((_n) * 4)) -/* Rx Packet plane TC Rate-Scheduler Status */ -#define E1000_RTRPTCRS(_n) (0x24A0 + ((_n) * 4)) -/* Rx Packet plane TC Rate-Scheduler MMW */ -#define E1000_RTRPTCRM(_n) (0x24C0 + ((_n) * 4)) -/* Tx Desc plane VM Rate-Scheduler MMW*/ -#define E1000_RTTDVMRM(_n) (0x3670 + ((_n) * 4)) -/* Tx BCN Rate-Scheduler MMW */ -#define E1000_RTTBCNRM(_n) (0x3690 + ((_n) * 4)) -#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select */ -#define E1000_RTTDVMRC 0x3608 /* Tx Desc Plane VM Rate-Scheduler Config */ -#define E1000_RTTDVMRS 0x360C /* Tx Desc Plane VM Rate-Scheduler Status */ -#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config */ -#define E1000_RTTBCNRS 0x36B4 /* Tx BCN Rate-Scheduler Status */ -#define E1000_RTTBCNCR 0xB200 /* Tx BCN Control Register */ -#define E1000_RTTBCNTG 0x35A4 /* Tx BCN Tagging */ -#define E1000_RTTBCNCP 0xB208 /* Tx BCN Congestion point */ -#define E1000_RTRBCNCR 0xB20C /* Rx BCN Control Register */ -#define E1000_RTTBCNRD 0x36B8 /* Tx BCN Rate Drift */ -#define E1000_PFCTOP 0x1080 /* Priority Flow Control Type and Opcode */ -#define E1000_RTTBCNIDX 0xB204 /* Tx BCN Congestion Point */ -#define E1000_RTTBCNACH 0x0B214 /* Tx BCN Control High */ -#define E1000_RTTBCNACL 0x0B210 /* Tx BCN Control Low */ - -/* DMA Coalescing registers */ -#define E1000_DMACR 0x02508 /* Control Register */ -#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ -#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ -#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ -#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ -#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ -#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ - -/* PCIe Parity Status Register */ -#define E1000_PCIEERRSTS 0x05BA8 - -#define E1000_PROXYS 0x5F64 /* Proxying Status */ -#define E1000_PROXYFC 0x5F60 /* Proxying Filter Control */ -/* Thermal sensor configuration and status registers */ -#define E1000_THMJT 0x08100 /* Junction Temperature */ -#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ -#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ -#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ -#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ - -/* Energy Efficient Ethernet "EEE" registers */ -#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ -#define E1000_LTRC 0x01A0 /* Latency Tolerance Reporting Control */ -#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet "EEE"*/ -#define E1000_EEE_SU 0x0E34 /* EEE Setup */ -#define E1000_TLPIC 0x4148 /* EEE Tx LPI Count - TLPIC */ -#define E1000_RLPIC 0x414C /* EEE Rx LPI Count - RLPIC */ - -/* OS2BMC Registers */ -#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ -#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ -#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ -#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ - - - -#endif diff --git a/kernel/linux/kni/ethtool/igb/igb.h b/kernel/linux/kni/ethtool/igb/igb.h deleted file mode 100644 index 8aa2a3088f..0000000000 --- a/kernel/linux/kni/ethtool/igb/igb.h +++ /dev/null @@ -1,844 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/* Linux PRO/1000 Ethernet Driver main header file */ - -#ifndef _IGB_H_ -#define _IGB_H_ - -#include - -#ifndef IGB_NO_LRO -#include -#endif - -#undef HAVE_HW_TIME_STAMP -#ifdef HAVE_HW_TIME_STAMP -#include -#include -#include - -#endif -#ifdef SIOCETHTOOL -#include -#endif - -struct igb_adapter; - -#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) -//#define IGB_DCA -#endif -#ifdef IGB_DCA -#include -#endif - -#include "kcompat.h" - -#ifdef HAVE_SCTP -#include -#endif - -#include "e1000_api.h" -#include "e1000_82575.h" -#include "e1000_manage.h" -#include "e1000_mbx.h" - -#define IGB_ERR(args...) printk(KERN_ERR "igb: " args) - -#define PFX "igb: " -#define DPRINTK(nlevel, klevel, fmt, args...) \ - (void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ - printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ - __FUNCTION__ , ## args)) - -#ifdef HAVE_PTP_1588_CLOCK -#include -#include -#include -#endif /* HAVE_PTP_1588_CLOCK */ - -#ifdef HAVE_I2C_SUPPORT -#include -#include -#endif /* HAVE_I2C_SUPPORT */ - -/* Interrupt defines */ -#define IGB_START_ITR 648 /* ~6000 ints/sec */ -#define IGB_4K_ITR 980 -#define IGB_20K_ITR 196 -#define IGB_70K_ITR 56 - -/* Interrupt modes, as used by the IntMode parameter */ -#define IGB_INT_MODE_LEGACY 0 -#define IGB_INT_MODE_MSI 1 -#define IGB_INT_MODE_MSIX 2 - -/* TX/RX descriptor defines */ -#define IGB_DEFAULT_TXD 256 -#define IGB_DEFAULT_TX_WORK 128 -#define IGB_MIN_TXD 80 -#define IGB_MAX_TXD 4096 - -#define IGB_DEFAULT_RXD 256 -#define IGB_MIN_RXD 80 -#define IGB_MAX_RXD 4096 - -#define IGB_MIN_ITR_USECS 10 /* 100k irq/sec */ -#define IGB_MAX_ITR_USECS 8191 /* 120 irq/sec */ - -#define NON_Q_VECTORS 1 -#define MAX_Q_VECTORS 10 - -/* Transmit and receive queues */ -#define IGB_MAX_RX_QUEUES 16 -#define IGB_MAX_TX_QUEUES 16 - -#define IGB_MAX_VF_MC_ENTRIES 30 -#define IGB_MAX_VF_FUNCTIONS 8 -#define IGB_82576_VF_DEV_ID 0x10CA -#define IGB_I350_VF_DEV_ID 0x1520 -#define IGB_MAX_UTA_ENTRIES 128 -#define MAX_EMULATION_MAC_ADDRS 16 -#define OUI_LEN 3 -#define IGB_MAX_VMDQ_QUEUES 8 - - -struct vf_data_storage { - unsigned char vf_mac_addresses[ETH_ALEN]; - u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES]; - u16 num_vf_mc_hashes; - u16 default_vf_vlan_id; - u16 vlans_enabled; - unsigned char em_mac_addresses[MAX_EMULATION_MAC_ADDRS * ETH_ALEN]; - u32 uta_table_copy[IGB_MAX_UTA_ENTRIES]; - u32 flags; - unsigned long last_nack; -#ifdef IFLA_VF_MAX - u16 pf_vlan; /* When set, guest VLAN config not allowed. */ - u16 pf_qos; - u16 tx_rate; -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE - bool spoofchk_enabled; -#endif -#endif -}; - -#define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */ -#define IGB_VF_FLAG_UNI_PROMISC 0x00000002 /* VF has unicast promisc */ -#define IGB_VF_FLAG_MULTI_PROMISC 0x00000004 /* VF has multicast promisc */ -#define IGB_VF_FLAG_PF_SET_MAC 0x00000008 /* PF has set MAC address */ - -/* RX descriptor control thresholds. - * PTHRESH - MAC will consider prefetch if it has fewer than this number of - * descriptors available in its onboard memory. - * Setting this to 0 disables RX descriptor prefetch. - * HTHRESH - MAC will only prefetch if there are at least this many descriptors - * available in host memory. - * If PTHRESH is 0, this should also be 0. - * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back - * descriptors until either it has this many to write back, or the - * ITR timer expires. - */ -#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8) -#define IGB_RX_HTHRESH 8 -#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) -#define IGB_TX_HTHRESH 1 -#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ - adapter->msix_entries) ? 1 : 4) - -/* this is the size past which hardware will drop packets when setting LPE=0 */ -#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 - -/* NOTE: netdev_alloc_skb reserves 16 bytes, NET_IP_ALIGN means we - * reserve 2 more, and skb_shared_info adds an additional 384 more, - * this adds roughly 448 bytes of extra data meaning the smallest - * allocation we could have is 1K. - * i.e. RXBUFFER_512 --> size-1024 slab - */ -/* Supported Rx Buffer Sizes */ -#define IGB_RXBUFFER_256 256 -#define IGB_RXBUFFER_2048 2048 -#define IGB_RXBUFFER_16384 16384 -#define IGB_RX_HDR_LEN IGB_RXBUFFER_256 -#if MAX_SKB_FRAGS < 8 -#define IGB_RX_BUFSZ ALIGN(MAX_JUMBO_FRAME_SIZE / MAX_SKB_FRAGS, 1024) -#else -#define IGB_RX_BUFSZ IGB_RXBUFFER_2048 -#endif - - -/* Packet Buffer allocations */ -#define IGB_PBA_BYTES_SHIFT 0xA -#define IGB_TX_HEAD_ADDR_SHIFT 7 -#define IGB_PBA_TX_MASK 0xFFFF0000 - -#define IGB_FC_PAUSE_TIME 0x0680 /* 858 usec */ - -/* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ - -#define IGB_EEPROM_APME 0x0400 -#define AUTO_ALL_MODES 0 - -#ifndef IGB_MASTER_SLAVE -/* Switch to override PHY master/slave setting */ -#define IGB_MASTER_SLAVE e1000_ms_hw_default -#endif - -#define IGB_MNG_VLAN_NONE -1 - -#ifndef IGB_NO_LRO -#define IGB_LRO_MAX 32 /*Maximum number of LRO descriptors*/ -struct igb_lro_stats { - u32 flushed; - u32 coal; -}; - -/* - * igb_lro_header - header format to be aggregated by LRO - * @iph: IP header without options - * @tcp: TCP header - * @ts: Optional TCP timestamp data in TCP options - * - * This structure relies on the check above that verifies that the header - * is IPv4 and does not contain any options. - */ -struct igb_lrohdr { - struct iphdr iph; - struct tcphdr th; - __be32 ts[0]; -}; - -struct igb_lro_list { - struct sk_buff_head active; - struct igb_lro_stats stats; -}; - -#endif /* IGB_NO_LRO */ -struct igb_cb { -#ifndef IGB_NO_LRO -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - union { /* Union defining head/tail partner */ - struct sk_buff *head; - struct sk_buff *tail; - }; -#endif - __be32 tsecr; /* timestamp echo response */ - u32 tsval; /* timestamp value in host order */ - u32 next_seq; /* next expected sequence number */ - u16 free; /* 65521 minus total size */ - u16 mss; /* size of data portion of packet */ - u16 append_cnt; /* number of skb's appended */ -#endif /* IGB_NO_LRO */ -#ifdef HAVE_VLAN_RX_REGISTER - u16 vid; /* VLAN tag */ -#endif -}; -#define IGB_CB(skb) ((struct igb_cb *)(skb)->cb) - -enum igb_tx_flags { - /* cmd_type flags */ - IGB_TX_FLAGS_VLAN = 0x01, - IGB_TX_FLAGS_TSO = 0x02, - IGB_TX_FLAGS_TSTAMP = 0x04, - - /* olinfo flags */ - IGB_TX_FLAGS_IPV4 = 0x10, - IGB_TX_FLAGS_CSUM = 0x20, -}; - -/* VLAN info */ -#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 -#define IGB_TX_FLAGS_VLAN_SHIFT 16 - -/* - * The largest size we can write to the descriptor is 65535. In order to - * maintain a power of two alignment we have to limit ourselves to 32K. - */ -#define IGB_MAX_TXD_PWR 15 -#define IGB_MAX_DATA_PER_TXD (1 << IGB_MAX_TXD_PWR) - -/* Tx Descriptors needed, worst case */ -#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD) -#ifndef MAX_SKB_FRAGS -#define DESC_NEEDED 4 -#elif (MAX_SKB_FRAGS < 16) -#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) -#else -#define DESC_NEEDED (MAX_SKB_FRAGS + 4) -#endif - -/* wrapper around a pointer to a socket buffer, - * so a DMA handle can be stored along with the buffer */ -struct igb_tx_buffer { - union e1000_adv_tx_desc *next_to_watch; - unsigned long time_stamp; - struct sk_buff *skb; - unsigned int bytecount; - u16 gso_segs; - __be16 protocol; - DEFINE_DMA_UNMAP_ADDR(dma); - DEFINE_DMA_UNMAP_LEN(len); - u32 tx_flags; -}; - -struct igb_rx_buffer { - dma_addr_t dma; -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - struct sk_buff *skb; -#else - struct page *page; - u32 page_offset; -#endif -}; - -struct igb_tx_queue_stats { - u64 packets; - u64 bytes; - u64 restart_queue; -}; - -struct igb_rx_queue_stats { - u64 packets; - u64 bytes; - u64 drops; - u64 csum_err; - u64 alloc_failed; - u64 ipv4_packets; /* IPv4 headers processed */ - u64 ipv4e_packets; /* IPv4E headers with extensions processed */ - u64 ipv6_packets; /* IPv6 headers processed */ - u64 ipv6e_packets; /* IPv6E headers with extensions processed */ - u64 tcp_packets; /* TCP headers processed */ - u64 udp_packets; /* UDP headers processed */ - u64 sctp_packets; /* SCTP headers processed */ - u64 nfs_packets; /* NFS headers processe */ -}; - -struct igb_ring_container { - struct igb_ring *ring; /* pointer to linked list of rings */ - unsigned int total_bytes; /* total bytes processed this int */ - unsigned int total_packets; /* total packets processed this int */ - u16 work_limit; /* total work allowed per interrupt */ - u8 count; /* total number of rings in vector */ - u8 itr; /* current ITR setting for ring */ -}; - -struct igb_ring { - struct igb_q_vector *q_vector; /* backlink to q_vector */ - struct net_device *netdev; /* back pointer to net_device */ - struct device *dev; /* device for dma mapping */ - union { /* array of buffer info structs */ - struct igb_tx_buffer *tx_buffer_info; - struct igb_rx_buffer *rx_buffer_info; - }; -#ifdef HAVE_PTP_1588_CLOCK - unsigned long last_rx_timestamp; -#endif /* HAVE_PTP_1588_CLOCK */ - void *desc; /* descriptor ring memory */ - unsigned long flags; /* ring specific flags */ - void __iomem *tail; /* pointer to ring tail register */ - dma_addr_t dma; /* phys address of the ring */ - unsigned int size; /* length of desc. ring in bytes */ - - u16 count; /* number of desc. in the ring */ - u8 queue_index; /* logical index of the ring*/ - u8 reg_idx; /* physical index of the ring */ - - /* everything past this point are written often */ - u16 next_to_clean; - u16 next_to_use; - u16 next_to_alloc; - - union { - /* TX */ - struct { - struct igb_tx_queue_stats tx_stats; - }; - /* RX */ - struct { - struct igb_rx_queue_stats rx_stats; -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - u16 rx_buffer_len; -#else - struct sk_buff *skb; -#endif - }; - }; -#ifdef CONFIG_IGB_VMDQ_NETDEV - struct net_device *vmdq_netdev; - int vqueue_index; /* queue index for virtual netdev */ -#endif -} ____cacheline_internodealigned_in_smp; - -struct igb_q_vector { - struct igb_adapter *adapter; /* backlink */ - int cpu; /* CPU for DCA */ - u32 eims_value; /* EIMS mask value */ - - u16 itr_val; - u8 set_itr; - void __iomem *itr_register; - - struct igb_ring_container rx, tx; - - struct napi_struct napi; -#ifndef IGB_NO_LRO - struct igb_lro_list lrolist; /* LRO list for queue vector*/ -#endif - char name[IFNAMSIZ + 9]; -#ifndef HAVE_NETDEV_NAPI_LIST - struct net_device poll_dev; -#endif - - /* for dynamic allocation of rings associated with this q_vector */ - struct igb_ring ring[0] ____cacheline_internodealigned_in_smp; -}; - -enum e1000_ring_flags_t { -#ifndef HAVE_NDO_SET_FEATURES - IGB_RING_FLAG_RX_CSUM, -#endif - IGB_RING_FLAG_RX_SCTP_CSUM, - IGB_RING_FLAG_RX_LB_VLAN_BSWAP, - IGB_RING_FLAG_TX_CTX_IDX, - IGB_RING_FLAG_TX_DETECT_HANG, -}; - -struct igb_mac_addr { - u8 addr[ETH_ALEN]; - u16 queue; - u16 state; /* bitmask */ -}; -#define IGB_MAC_STATE_DEFAULT 0x1 -#define IGB_MAC_STATE_MODIFIED 0x2 -#define IGB_MAC_STATE_IN_USE 0x4 - -#define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS) - -#define IGB_RX_DESC(R, i) \ - (&(((union e1000_adv_rx_desc *)((R)->desc))[i])) -#define IGB_TX_DESC(R, i) \ - (&(((union e1000_adv_tx_desc *)((R)->desc))[i])) -#define IGB_TX_CTXTDESC(R, i) \ - (&(((struct e1000_adv_tx_context_desc *)((R)->desc))[i])) - -#ifdef CONFIG_IGB_VMDQ_NETDEV -#define netdev_ring(ring) \ - ((ring->vmdq_netdev ? ring->vmdq_netdev : ring->netdev)) -#define ring_queue_index(ring) \ - ((ring->vmdq_netdev ? ring->vqueue_index : ring->queue_index)) -#else -#define netdev_ring(ring) (ring->netdev) -#define ring_queue_index(ring) (ring->queue_index) -#endif /* CONFIG_IGB_VMDQ_NETDEV */ - -/* igb_test_staterr - tests bits within Rx descriptor status and error fields */ -static inline __le32 igb_test_staterr(union e1000_adv_rx_desc *rx_desc, - const u32 stat_err_bits) -{ - return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits); -} - -/* igb_desc_unused - calculate if we have unused descriptors */ -static inline u16 igb_desc_unused(const struct igb_ring *ring) -{ - u16 ntc = ring->next_to_clean; - u16 ntu = ring->next_to_use; - - return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1; -} - -#ifdef CONFIG_BQL -static inline struct netdev_queue *txring_txq(const struct igb_ring *tx_ring) -{ - return netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index); -} -#endif /* CONFIG_BQL */ - -// #ifdef EXT_THERMAL_SENSOR_SUPPORT -// #ifdef IGB_PROCFS -struct igb_therm_proc_data -{ - struct e1000_hw *hw; - struct e1000_thermal_diode_data *sensor_data; -}; - -// #endif /* IGB_PROCFS */ -// #endif /* EXT_THERMAL_SENSOR_SUPPORT */ - -#ifdef IGB_HWMON -#define IGB_HWMON_TYPE_LOC 0 -#define IGB_HWMON_TYPE_TEMP 1 -#define IGB_HWMON_TYPE_CAUTION 2 -#define IGB_HWMON_TYPE_MAX 3 - -struct hwmon_attr { - struct device_attribute dev_attr; - struct e1000_hw *hw; - struct e1000_thermal_diode_data *sensor; - char name[12]; - }; - -struct hwmon_buff { - struct device *device; - struct hwmon_attr *hwmon_list; - unsigned int n_hwmon; - }; -#endif /* IGB_HWMON */ - -/* board specific private data structure */ -struct igb_adapter { -#ifdef HAVE_VLAN_RX_REGISTER - /* vlgrp must be first member of structure */ - struct vlan_group *vlgrp; -#else - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; -#endif - struct net_device *netdev; - - unsigned long state; - unsigned int flags; - - unsigned int num_q_vectors; - struct msix_entry *msix_entries; - - - /* TX */ - u16 tx_work_limit; - u32 tx_timeout_count; - int num_tx_queues; - struct igb_ring *tx_ring[IGB_MAX_TX_QUEUES]; - - /* RX */ - int num_rx_queues; - struct igb_ring *rx_ring[IGB_MAX_RX_QUEUES]; - - struct timer_list watchdog_timer; - struct timer_list dma_err_timer; - struct timer_list phy_info_timer; - u16 mng_vlan_id; - u32 bd_number; - u32 wol; - u32 en_mng_pt; - u16 link_speed; - u16 link_duplex; - u8 port_num; - - /* Interrupt Throttle Rate */ - u32 rx_itr_setting; - u32 tx_itr_setting; - - struct work_struct reset_task; - struct work_struct watchdog_task; - struct work_struct dma_err_task; - bool fc_autoneg; - u8 tx_timeout_factor; - -#ifdef DEBUG - bool tx_hang_detected; - bool disable_hw_reset; -#endif - u32 max_frame_size; - - /* OS defined structs */ - struct pci_dev *pdev; -#ifndef HAVE_NETDEV_STATS_IN_NETDEV - struct net_device_stats net_stats; -#endif -#ifndef IGB_NO_LRO - struct igb_lro_stats lro_stats; -#endif - - /* structs defined in e1000_hw.h */ - struct e1000_hw hw; - struct e1000_hw_stats stats; - struct e1000_phy_info phy_info; - struct e1000_phy_stats phy_stats; - -#ifdef ETHTOOL_TEST - u32 test_icr; - struct igb_ring test_tx_ring; - struct igb_ring test_rx_ring; -#endif - - int msg_enable; - - struct igb_q_vector *q_vector[MAX_Q_VECTORS]; - u32 eims_enable_mask; - u32 eims_other; - - /* to not mess up cache alignment, always add to the bottom */ - u32 *config_space; - u16 tx_ring_count; - u16 rx_ring_count; - struct vf_data_storage *vf_data; -#ifdef IFLA_VF_MAX - int vf_rate_link_speed; -#endif - u32 lli_port; - u32 lli_size; - unsigned int vfs_allocated_count; - /* Malicious Driver Detection flag. Valid only when SR-IOV is enabled */ - bool mdd; - int int_mode; - u32 rss_queues; - u32 vmdq_pools; - char fw_version[43]; - u32 wvbr; - struct igb_mac_addr *mac_table; -#ifdef CONFIG_IGB_VMDQ_NETDEV - struct net_device *vmdq_netdev[IGB_MAX_VMDQ_QUEUES]; -#endif - int vferr_refcount; - int dmac; - u32 *shadow_vfta; - - /* External Thermal Sensor support flag */ - bool ets; -#ifdef IGB_HWMON - struct hwmon_buff igb_hwmon_buff; -#else /* IGB_HWMON */ -#ifdef IGB_PROCFS - struct proc_dir_entry *eth_dir; - struct proc_dir_entry *info_dir; - struct proc_dir_entry *therm_dir[E1000_MAX_SENSORS]; - struct igb_therm_proc_data therm_data[E1000_MAX_SENSORS]; - bool old_lsc; -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - u32 etrack_id; - -#ifdef HAVE_PTP_1588_CLOCK - struct ptp_clock *ptp_clock; - struct ptp_clock_info ptp_caps; - struct delayed_work ptp_overflow_work; - struct work_struct ptp_tx_work; - struct sk_buff *ptp_tx_skb; - unsigned long ptp_tx_start; - unsigned long last_rx_ptp_check; - spinlock_t tmreg_lock; - struct cyclecounter cc; - struct timecounter tc; - u32 tx_hwtstamp_timeouts; - u32 rx_hwtstamp_cleared; -#endif /* HAVE_PTP_1588_CLOCK */ - -#ifdef HAVE_I2C_SUPPORT - struct i2c_algo_bit_data i2c_algo; - struct i2c_adapter i2c_adap; - struct i2c_client *i2c_client; -#endif /* HAVE_I2C_SUPPORT */ - unsigned long link_check_timeout; - - - int devrc; - - int copper_tries; - u16 eee_advert; -}; - -#ifdef CONFIG_IGB_VMDQ_NETDEV -struct igb_vmdq_adapter { -#ifdef HAVE_VLAN_RX_REGISTER - /* vlgrp must be first member of structure */ - struct vlan_group *vlgrp; -#else - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; -#endif - struct igb_adapter *real_adapter; - struct net_device *vnetdev; - struct net_device_stats net_stats; - struct igb_ring *tx_ring; - struct igb_ring *rx_ring; -}; -#endif - -#define IGB_FLAG_HAS_MSI (1 << 0) -#define IGB_FLAG_DCA_ENABLED (1 << 1) -#define IGB_FLAG_LLI_PUSH (1 << 2) -#define IGB_FLAG_QUAD_PORT_A (1 << 3) -#define IGB_FLAG_QUEUE_PAIRS (1 << 4) -#define IGB_FLAG_EEE (1 << 5) -#define IGB_FLAG_DMAC (1 << 6) -#define IGB_FLAG_DETECT_BAD_DMA (1 << 7) -#define IGB_FLAG_PTP (1 << 8) -#define IGB_FLAG_RSS_FIELD_IPV4_UDP (1 << 9) -#define IGB_FLAG_RSS_FIELD_IPV6_UDP (1 << 10) -#define IGB_FLAG_WOL_SUPPORTED (1 << 11) -#define IGB_FLAG_NEED_LINK_UPDATE (1 << 12) -#define IGB_FLAG_LOOPBACK_ENABLE (1 << 13) -#define IGB_FLAG_MEDIA_RESET (1 << 14) -#define IGB_FLAG_MAS_ENABLE (1 << 15) - -/* Media Auto Sense */ -#define IGB_MAS_ENABLE_0 0X0001 -#define IGB_MAS_ENABLE_1 0X0002 -#define IGB_MAS_ENABLE_2 0X0004 -#define IGB_MAS_ENABLE_3 0X0008 - -#define IGB_MIN_TXPBSIZE 20408 -#define IGB_TX_BUF_4096 4096 - -#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */ - -/* DMA Coalescing defines */ -#define IGB_DMAC_DISABLE 0 -#define IGB_DMAC_MIN 250 -#define IGB_DMAC_500 500 -#define IGB_DMAC_EN_DEFAULT 1000 -#define IGB_DMAC_2000 2000 -#define IGB_DMAC_3000 3000 -#define IGB_DMAC_4000 4000 -#define IGB_DMAC_5000 5000 -#define IGB_DMAC_6000 6000 -#define IGB_DMAC_7000 7000 -#define IGB_DMAC_8000 8000 -#define IGB_DMAC_9000 9000 -#define IGB_DMAC_MAX 10000 - -#define IGB_82576_TSYNC_SHIFT 19 -#define IGB_82580_TSYNC_SHIFT 24 -#define IGB_TS_HDR_LEN 16 - -/* CEM Support */ -#define FW_HDR_LEN 0x4 -#define FW_CMD_DRV_INFO 0xDD -#define FW_CMD_DRV_INFO_LEN 0x5 -#define FW_CMD_RESERVED 0X0 -#define FW_RESP_SUCCESS 0x1 -#define FW_UNUSED_VER 0x0 -#define FW_MAX_RETRIES 3 -#define FW_STATUS_SUCCESS 0x1 -#define FW_FAMILY_DRV_VER 0Xffffffff - -#define IGB_MAX_LINK_TRIES 20 - -struct e1000_fw_hdr { - u8 cmd; - u8 buf_len; - union - { - u8 cmd_resv; - u8 ret_status; - } cmd_or_resp; - u8 checksum; -}; - -#pragma pack(push,1) -struct e1000_fw_drv_info { - struct e1000_fw_hdr hdr; - u8 port_num; - u32 drv_version; - u16 pad; /* end spacing to ensure length is mult. of dword */ - u8 pad2; /* end spacing to ensure length is mult. of dword2 */ -}; -#pragma pack(pop) - -enum e1000_state_t { - __IGB_TESTING, - __IGB_RESETTING, - __IGB_DOWN -}; - -extern char igb_driver_name[]; -extern char igb_driver_version[]; - -extern int igb_up(struct igb_adapter *); -extern void igb_down(struct igb_adapter *); -extern void igb_reinit_locked(struct igb_adapter *); -extern void igb_reset(struct igb_adapter *); -extern int igb_set_spd_dplx(struct igb_adapter *, u16); -extern int igb_setup_tx_resources(struct igb_ring *); -extern int igb_setup_rx_resources(struct igb_ring *); -extern void igb_free_tx_resources(struct igb_ring *); -extern void igb_free_rx_resources(struct igb_ring *); -extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *); -extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *); -extern void igb_setup_tctl(struct igb_adapter *); -extern void igb_setup_rctl(struct igb_adapter *); -extern netdev_tx_t igb_xmit_frame_ring(struct sk_buff *, struct igb_ring *); -extern void igb_unmap_and_free_tx_resource(struct igb_ring *, - struct igb_tx_buffer *); -extern void igb_alloc_rx_buffers(struct igb_ring *, u16); -extern void igb_clean_rx_ring(struct igb_ring *); -extern void igb_update_stats(struct igb_adapter *); -extern bool igb_has_link(struct igb_adapter *adapter); -extern void igb_set_ethtool_ops(struct net_device *); -extern void igb_check_options(struct igb_adapter *); -extern void igb_power_up_link(struct igb_adapter *); -#ifdef HAVE_PTP_1588_CLOCK -extern void igb_ptp_init(struct igb_adapter *adapter); -extern void igb_ptp_stop(struct igb_adapter *adapter); -extern void igb_ptp_reset(struct igb_adapter *adapter); -extern void igb_ptp_tx_work(struct work_struct *work); -extern void igb_ptp_rx_hang(struct igb_adapter *adapter); -extern void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter); -extern void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, - struct sk_buff *skb); -extern void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, - unsigned char *va, - struct sk_buff *skb); -static inline void igb_ptp_rx_hwtstamp(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb); - skb_pull(skb, IGB_TS_HDR_LEN); -#endif - return; - } - - if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS)) - igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb); - - /* Update the last_rx_timestamp timer in order to enable watchdog check - * for error case of latched timestamp on a dropped packet. - */ - rx_ring->last_rx_timestamp = jiffies; -} - -extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, - struct ifreq *ifr, int cmd); -#endif /* HAVE_PTP_1588_CLOCK */ -#ifdef ETHTOOL_OPS_COMPAT -extern int ethtool_ioctl(struct ifreq *); -#endif -extern int igb_write_mc_addr_list(struct net_device *netdev); -extern int igb_add_mac_filter(struct igb_adapter *adapter, u8 *addr, u16 queue); -extern int igb_del_mac_filter(struct igb_adapter *adapter, u8* addr, u16 queue); -extern int igb_available_rars(struct igb_adapter *adapter); -extern s32 igb_vlvf_set(struct igb_adapter *, u32, bool, u32); -extern void igb_configure_vt_default_pool(struct igb_adapter *adapter); -extern void igb_enable_vlan_tags(struct igb_adapter *adapter); -#ifndef HAVE_VLAN_RX_REGISTER -extern void igb_vlan_mode(struct net_device *, u32); -#endif - -#define E1000_PCS_CFG_IGN_SD 1 - -#ifdef IGB_HWMON -void igb_sysfs_exit(struct igb_adapter *adapter); -int igb_sysfs_init(struct igb_adapter *adapter); -#else -#ifdef IGB_PROCFS -int igb_procfs_init(struct igb_adapter* adapter); -void igb_procfs_exit(struct igb_adapter* adapter); -int igb_procfs_topdir_init(void); -void igb_procfs_topdir_exit(void); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - - - -#endif /* _IGB_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/igb_ethtool.c b/kernel/linux/kni/ethtool/igb/igb_ethtool.c deleted file mode 100644 index b6bddc025e..0000000000 --- a/kernel/linux/kni/ethtool/igb/igb_ethtool.c +++ /dev/null @@ -1,2851 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/* ethtool support for igb */ - -#include -#include - -#ifdef SIOCETHTOOL -#include -#ifdef CONFIG_PM_RUNTIME -#include -#endif /* CONFIG_PM_RUNTIME */ -#include - -#include "igb.h" -#include "igb_regtest.h" -#include -#ifdef ETHTOOL_GEEE -#include -#endif - -#ifdef ETHTOOL_OPS_COMPAT -#include "kcompat_ethtool.c" -#endif -#ifdef ETHTOOL_GSTATS -struct igb_stats { - char stat_string[ETH_GSTRING_LEN]; - int sizeof_stat; - int stat_offset; -}; - -#define IGB_STAT(_name, _stat) { \ - .stat_string = _name, \ - .sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \ - .stat_offset = offsetof(struct igb_adapter, _stat) \ -} -static const struct igb_stats igb_gstrings_stats[] = { - IGB_STAT("rx_packets", stats.gprc), - IGB_STAT("tx_packets", stats.gptc), - IGB_STAT("rx_bytes", stats.gorc), - IGB_STAT("tx_bytes", stats.gotc), - IGB_STAT("rx_broadcast", stats.bprc), - IGB_STAT("tx_broadcast", stats.bptc), - IGB_STAT("rx_multicast", stats.mprc), - IGB_STAT("tx_multicast", stats.mptc), - IGB_STAT("multicast", stats.mprc), - IGB_STAT("collisions", stats.colc), - IGB_STAT("rx_crc_errors", stats.crcerrs), - IGB_STAT("rx_no_buffer_count", stats.rnbc), - IGB_STAT("rx_missed_errors", stats.mpc), - IGB_STAT("tx_aborted_errors", stats.ecol), - IGB_STAT("tx_carrier_errors", stats.tncrs), - IGB_STAT("tx_window_errors", stats.latecol), - IGB_STAT("tx_abort_late_coll", stats.latecol), - IGB_STAT("tx_deferred_ok", stats.dc), - IGB_STAT("tx_single_coll_ok", stats.scc), - IGB_STAT("tx_multi_coll_ok", stats.mcc), - IGB_STAT("tx_timeout_count", tx_timeout_count), - IGB_STAT("rx_long_length_errors", stats.roc), - IGB_STAT("rx_short_length_errors", stats.ruc), - IGB_STAT("rx_align_errors", stats.algnerrc), - IGB_STAT("tx_tcp_seg_good", stats.tsctc), - IGB_STAT("tx_tcp_seg_failed", stats.tsctfc), - IGB_STAT("rx_flow_control_xon", stats.xonrxc), - IGB_STAT("rx_flow_control_xoff", stats.xoffrxc), - IGB_STAT("tx_flow_control_xon", stats.xontxc), - IGB_STAT("tx_flow_control_xoff", stats.xofftxc), - IGB_STAT("rx_long_byte_count", stats.gorc), - IGB_STAT("tx_dma_out_of_sync", stats.doosync), -#ifndef IGB_NO_LRO - IGB_STAT("lro_aggregated", lro_stats.coal), - IGB_STAT("lro_flushed", lro_stats.flushed), -#endif /* IGB_LRO */ - IGB_STAT("tx_smbus", stats.mgptc), - IGB_STAT("rx_smbus", stats.mgprc), - IGB_STAT("dropped_smbus", stats.mgpdc), - IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc), - IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc), - IGB_STAT("os2bmc_tx_by_host", stats.o2bspc), - IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc), -#ifdef HAVE_PTP_1588_CLOCK - IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), - IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), -#endif /* HAVE_PTP_1588_CLOCK */ -}; - -#define IGB_NETDEV_STAT(_net_stat) { \ - .stat_string = #_net_stat, \ - .sizeof_stat = FIELD_SIZEOF(struct net_device_stats, _net_stat), \ - .stat_offset = offsetof(struct net_device_stats, _net_stat) \ -} -static const struct igb_stats igb_gstrings_net_stats[] = { - IGB_NETDEV_STAT(rx_errors), - IGB_NETDEV_STAT(tx_errors), - IGB_NETDEV_STAT(tx_dropped), - IGB_NETDEV_STAT(rx_length_errors), - IGB_NETDEV_STAT(rx_over_errors), - IGB_NETDEV_STAT(rx_frame_errors), - IGB_NETDEV_STAT(rx_fifo_errors), - IGB_NETDEV_STAT(tx_fifo_errors), - IGB_NETDEV_STAT(tx_heartbeat_errors) -}; - -#define IGB_GLOBAL_STATS_LEN ARRAY_SIZE(igb_gstrings_stats) -#define IGB_NETDEV_STATS_LEN ARRAY_SIZE(igb_gstrings_net_stats) -#define IGB_RX_QUEUE_STATS_LEN \ - (sizeof(struct igb_rx_queue_stats) / sizeof(u64)) -#define IGB_TX_QUEUE_STATS_LEN \ - (sizeof(struct igb_tx_queue_stats) / sizeof(u64)) -#define IGB_QUEUE_STATS_LEN \ - ((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \ - IGB_RX_QUEUE_STATS_LEN) + \ - (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \ - IGB_TX_QUEUE_STATS_LEN)) -#define IGB_STATS_LEN \ - (IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN) - -#endif /* ETHTOOL_GSTATS */ -#ifdef ETHTOOL_TEST -static const char igb_gstrings_test[][ETH_GSTRING_LEN] = { - "Register test (offline)", "Eeprom test (offline)", - "Interrupt test (offline)", "Loopback test (offline)", - "Link test (on/offline)" -}; -#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN) -#endif /* ETHTOOL_TEST */ - -#ifndef ETHTOOL_GLINKSETTINGS -static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 status; - - if (hw->phy.media_type == e1000_media_type_copper) { - - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full| - SUPPORTED_Autoneg | - SUPPORTED_TP | - SUPPORTED_Pause); - ecmd->advertising = ADVERTISED_TP; - - if (hw->mac.autoneg == 1) { - ecmd->advertising |= ADVERTISED_Autoneg; - /* the e1000 autoneg seems to match ethtool nicely */ - ecmd->advertising |= hw->phy.autoneg_advertised; - } - - ecmd->port = PORT_TP; - ecmd->phy_address = hw->phy.addr; - ecmd->transceiver = XCVR_INTERNAL; - - } else { - ecmd->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_100baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg | - SUPPORTED_Pause); - if (hw->mac.type == e1000_i354) - ecmd->supported |= (SUPPORTED_2500baseX_Full); - - ecmd->advertising = ADVERTISED_FIBRE; - - switch (adapter->link_speed) { - case SPEED_2500: - ecmd->advertising = ADVERTISED_2500baseX_Full; - break; - case SPEED_1000: - ecmd->advertising = ADVERTISED_1000baseT_Full; - break; - case SPEED_100: - ecmd->advertising = ADVERTISED_100baseT_Full; - break; - default: - break; - } - - if (hw->mac.autoneg == 1) - ecmd->advertising |= ADVERTISED_Autoneg; - - ecmd->port = PORT_FIBRE; - ecmd->transceiver = XCVR_EXTERNAL; - } - - if (hw->mac.autoneg != 1) - ecmd->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - - if (hw->fc.requested_mode == e1000_fc_full) - ecmd->advertising |= ADVERTISED_Pause; - else if (hw->fc.requested_mode == e1000_fc_rx_pause) - ecmd->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - else if (hw->fc.requested_mode == e1000_fc_tx_pause) - ecmd->advertising |= ADVERTISED_Asym_Pause; - else - ecmd->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - - status = E1000_READ_REG(hw, E1000_STATUS); - - if (status & E1000_STATUS_LU) { - if ((hw->mac.type == e1000_i354) && - (status & E1000_STATUS_2P5_SKU) && - !(status & E1000_STATUS_2P5_SKU_OVER)) - ecmd->speed = SPEED_2500; - else if (status & E1000_STATUS_SPEED_1000) - ecmd->speed = SPEED_1000; - else if (status & E1000_STATUS_SPEED_100) - ecmd->speed = SPEED_100; - else - ecmd->speed = SPEED_10; - - if ((status & E1000_STATUS_FD) || - hw->phy.media_type != e1000_media_type_copper) - ecmd->duplex = DUPLEX_FULL; - else - ecmd->duplex = DUPLEX_HALF; - - } else { - ecmd->speed = -1; - ecmd->duplex = -1; - } - - if ((hw->phy.media_type == e1000_media_type_fiber) || - hw->mac.autoneg) - ecmd->autoneg = AUTONEG_ENABLE; - else - ecmd->autoneg = AUTONEG_DISABLE; -#ifdef ETH_TP_MDI_X - - /* MDI-X => 2; MDI =>1; Invalid =>0 */ - if (hw->phy.media_type == e1000_media_type_copper) - ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : - ETH_TP_MDI; - else - ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; - -#ifdef ETH_TP_MDI_AUTO - if (hw->phy.mdix == AUTO_ALL_MODES) - ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; - else - ecmd->eth_tp_mdix_ctrl = hw->phy.mdix; - -#endif -#endif /* ETH_TP_MDI_X */ - return 0; -} -#endif - -#ifndef ETHTOOL_SLINKSETTINGS -static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - if (ecmd->duplex == DUPLEX_HALF) { - if (!hw->dev_spec._82575.eee_disable) - dev_info(pci_dev_to_dev(adapter->pdev), "EEE disabled: not supported with half duplex\n"); - hw->dev_spec._82575.eee_disable = true; - } else { - if (hw->dev_spec._82575.eee_disable) - dev_info(pci_dev_to_dev(adapter->pdev), "EEE enabled\n"); - hw->dev_spec._82575.eee_disable = false; - } - - /* When SoL/IDER sessions are active, autoneg/speed/duplex - * cannot be changed */ - if (e1000_check_reset_block(hw)) { - dev_err(pci_dev_to_dev(adapter->pdev), "Cannot change link " - "characteristics when SoL/IDER is active.\n"); - return -EINVAL; - } - -#ifdef ETH_TP_MDI_AUTO - /* - * MDI setting is only allowed when autoneg enabled because - * some hardware doesn't allow MDI setting when speed or - * duplex is forced. - */ - if (ecmd->eth_tp_mdix_ctrl) { - if (hw->phy.media_type != e1000_media_type_copper) - return -EOPNOTSUPP; - - if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && - (ecmd->autoneg != AUTONEG_ENABLE)) { - dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); - return -EINVAL; - } - } - -#endif /* ETH_TP_MDI_AUTO */ - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - - if (ecmd->autoneg == AUTONEG_ENABLE) { - hw->mac.autoneg = 1; - if (hw->phy.media_type == e1000_media_type_fiber) { - hw->phy.autoneg_advertised = ecmd->advertising | - ADVERTISED_FIBRE | - ADVERTISED_Autoneg; - switch (adapter->link_speed) { - case SPEED_2500: - hw->phy.autoneg_advertised = - ADVERTISED_2500baseX_Full; - break; - case SPEED_1000: - hw->phy.autoneg_advertised = - ADVERTISED_1000baseT_Full; - break; - case SPEED_100: - hw->phy.autoneg_advertised = - ADVERTISED_100baseT_Full; - break; - default: - break; - } - } else { - hw->phy.autoneg_advertised = ecmd->advertising | - ADVERTISED_TP | - ADVERTISED_Autoneg; - } - ecmd->advertising = hw->phy.autoneg_advertised; - if (adapter->fc_autoneg) - hw->fc.requested_mode = e1000_fc_default; - } else { - if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { - clear_bit(__IGB_RESETTING, &adapter->state); - return -EINVAL; - } - } - -#ifdef ETH_TP_MDI_AUTO - /* MDI-X => 2; MDI => 1; Auto => 3 */ - if (ecmd->eth_tp_mdix_ctrl) { - /* fix up the value for auto (3 => 0) as zero is mapped - * internally to auto - */ - if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) - hw->phy.mdix = AUTO_ALL_MODES; - else - hw->phy.mdix = ecmd->eth_tp_mdix_ctrl; - } - -#endif /* ETH_TP_MDI_AUTO */ - /* reset the link */ - if (netif_running(adapter->netdev)) { - igb_down(adapter); - igb_up(adapter); - } else - igb_reset(adapter); - - clear_bit(__IGB_RESETTING, &adapter->state); - return 0; -} -#endif - -static u32 igb_get_link(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_mac_info *mac = &adapter->hw.mac; - - /* - * If the link is not reported up to netdev, interrupts are disabled, - * and so the physical link state may have changed since we last - * looked. Set get_link_status to make sure that the true link - * state is interrogated, rather than pulling a cached and possibly - * stale link state from the driver. - */ - if (!netif_carrier_ok(netdev)) - mac->get_link_status = 1; - - return igb_has_link(adapter); -} - -static void igb_get_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *pause) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - pause->autoneg = - (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - - if (hw->fc.current_mode == e1000_fc_rx_pause) - pause->rx_pause = 1; - else if (hw->fc.current_mode == e1000_fc_tx_pause) - pause->tx_pause = 1; - else if (hw->fc.current_mode == e1000_fc_full) { - pause->rx_pause = 1; - pause->tx_pause = 1; - } -} - -static int igb_set_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *pause) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - int retval = 0; - - adapter->fc_autoneg = pause->autoneg; - - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - - if (adapter->fc_autoneg == AUTONEG_ENABLE) { - hw->fc.requested_mode = e1000_fc_default; - if (netif_running(adapter->netdev)) { - igb_down(adapter); - igb_up(adapter); - } else { - igb_reset(adapter); - } - } else { - if (pause->rx_pause && pause->tx_pause) - hw->fc.requested_mode = e1000_fc_full; - else if (pause->rx_pause && !pause->tx_pause) - hw->fc.requested_mode = e1000_fc_rx_pause; - else if (!pause->rx_pause && pause->tx_pause) - hw->fc.requested_mode = e1000_fc_tx_pause; - else if (!pause->rx_pause && !pause->tx_pause) - hw->fc.requested_mode = e1000_fc_none; - - hw->fc.current_mode = hw->fc.requested_mode; - - if (hw->phy.media_type == e1000_media_type_fiber) { - retval = hw->mac.ops.setup_link(hw); - /* implicit goto out */ - } else { - retval = e1000_force_mac_fc(hw); - if (retval) - goto out; - e1000_set_fc_watermarks_generic(hw); - } - } - -out: - clear_bit(__IGB_RESETTING, &adapter->state); - return retval; -} - -static u32 igb_get_msglevel(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - return adapter->msg_enable; -} - -static void igb_set_msglevel(struct net_device *netdev, u32 data) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - adapter->msg_enable = data; -} - -static int igb_get_regs_len(struct net_device *netdev) -{ -#define IGB_REGS_LEN 555 - return IGB_REGS_LEN * sizeof(u32); -} - -static void igb_get_regs(struct net_device *netdev, - struct ethtool_regs *regs, void *p) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 *regs_buff = p; - u8 i; - - memset(p, 0, IGB_REGS_LEN * sizeof(u32)); - - regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; - - /* General Registers */ - regs_buff[0] = E1000_READ_REG(hw, E1000_CTRL); - regs_buff[1] = E1000_READ_REG(hw, E1000_STATUS); - regs_buff[2] = E1000_READ_REG(hw, E1000_CTRL_EXT); - regs_buff[3] = E1000_READ_REG(hw, E1000_MDIC); - regs_buff[4] = E1000_READ_REG(hw, E1000_SCTL); - regs_buff[5] = E1000_READ_REG(hw, E1000_CONNSW); - regs_buff[6] = E1000_READ_REG(hw, E1000_VET); - regs_buff[7] = E1000_READ_REG(hw, E1000_LEDCTL); - regs_buff[8] = E1000_READ_REG(hw, E1000_PBA); - regs_buff[9] = E1000_READ_REG(hw, E1000_PBS); - regs_buff[10] = E1000_READ_REG(hw, E1000_FRTIMER); - regs_buff[11] = E1000_READ_REG(hw, E1000_TCPTIMER); - - /* NVM Register */ - regs_buff[12] = E1000_READ_REG(hw, E1000_EECD); - - /* Interrupt */ - /* Reading EICS for EICR because they read the - * same but EICS does not clear on read */ - regs_buff[13] = E1000_READ_REG(hw, E1000_EICS); - regs_buff[14] = E1000_READ_REG(hw, E1000_EICS); - regs_buff[15] = E1000_READ_REG(hw, E1000_EIMS); - regs_buff[16] = E1000_READ_REG(hw, E1000_EIMC); - regs_buff[17] = E1000_READ_REG(hw, E1000_EIAC); - regs_buff[18] = E1000_READ_REG(hw, E1000_EIAM); - /* Reading ICS for ICR because they read the - * same but ICS does not clear on read */ - regs_buff[19] = E1000_READ_REG(hw, E1000_ICS); - regs_buff[20] = E1000_READ_REG(hw, E1000_ICS); - regs_buff[21] = E1000_READ_REG(hw, E1000_IMS); - regs_buff[22] = E1000_READ_REG(hw, E1000_IMC); - regs_buff[23] = E1000_READ_REG(hw, E1000_IAC); - regs_buff[24] = E1000_READ_REG(hw, E1000_IAM); - regs_buff[25] = E1000_READ_REG(hw, E1000_IMIRVP); - - /* Flow Control */ - regs_buff[26] = E1000_READ_REG(hw, E1000_FCAL); - regs_buff[27] = E1000_READ_REG(hw, E1000_FCAH); - regs_buff[28] = E1000_READ_REG(hw, E1000_FCTTV); - regs_buff[29] = E1000_READ_REG(hw, E1000_FCRTL); - regs_buff[30] = E1000_READ_REG(hw, E1000_FCRTH); - regs_buff[31] = E1000_READ_REG(hw, E1000_FCRTV); - - /* Receive */ - regs_buff[32] = E1000_READ_REG(hw, E1000_RCTL); - regs_buff[33] = E1000_READ_REG(hw, E1000_RXCSUM); - regs_buff[34] = E1000_READ_REG(hw, E1000_RLPML); - regs_buff[35] = E1000_READ_REG(hw, E1000_RFCTL); - regs_buff[36] = E1000_READ_REG(hw, E1000_MRQC); - regs_buff[37] = E1000_READ_REG(hw, E1000_VT_CTL); - - /* Transmit */ - regs_buff[38] = E1000_READ_REG(hw, E1000_TCTL); - regs_buff[39] = E1000_READ_REG(hw, E1000_TCTL_EXT); - regs_buff[40] = E1000_READ_REG(hw, E1000_TIPG); - regs_buff[41] = E1000_READ_REG(hw, E1000_DTXCTL); - - /* Wake Up */ - regs_buff[42] = E1000_READ_REG(hw, E1000_WUC); - regs_buff[43] = E1000_READ_REG(hw, E1000_WUFC); - regs_buff[44] = E1000_READ_REG(hw, E1000_WUS); - regs_buff[45] = E1000_READ_REG(hw, E1000_IPAV); - regs_buff[46] = E1000_READ_REG(hw, E1000_WUPL); - - /* MAC */ - regs_buff[47] = E1000_READ_REG(hw, E1000_PCS_CFG0); - regs_buff[48] = E1000_READ_REG(hw, E1000_PCS_LCTL); - regs_buff[49] = E1000_READ_REG(hw, E1000_PCS_LSTAT); - regs_buff[50] = E1000_READ_REG(hw, E1000_PCS_ANADV); - regs_buff[51] = E1000_READ_REG(hw, E1000_PCS_LPAB); - regs_buff[52] = E1000_READ_REG(hw, E1000_PCS_NPTX); - regs_buff[53] = E1000_READ_REG(hw, E1000_PCS_LPABNP); - - /* Statistics */ - regs_buff[54] = adapter->stats.crcerrs; - regs_buff[55] = adapter->stats.algnerrc; - regs_buff[56] = adapter->stats.symerrs; - regs_buff[57] = adapter->stats.rxerrc; - regs_buff[58] = adapter->stats.mpc; - regs_buff[59] = adapter->stats.scc; - regs_buff[60] = adapter->stats.ecol; - regs_buff[61] = adapter->stats.mcc; - regs_buff[62] = adapter->stats.latecol; - regs_buff[63] = adapter->stats.colc; - regs_buff[64] = adapter->stats.dc; - regs_buff[65] = adapter->stats.tncrs; - regs_buff[66] = adapter->stats.sec; - regs_buff[67] = adapter->stats.htdpmc; - regs_buff[68] = adapter->stats.rlec; - regs_buff[69] = adapter->stats.xonrxc; - regs_buff[70] = adapter->stats.xontxc; - regs_buff[71] = adapter->stats.xoffrxc; - regs_buff[72] = adapter->stats.xofftxc; - regs_buff[73] = adapter->stats.fcruc; - regs_buff[74] = adapter->stats.prc64; - regs_buff[75] = adapter->stats.prc127; - regs_buff[76] = adapter->stats.prc255; - regs_buff[77] = adapter->stats.prc511; - regs_buff[78] = adapter->stats.prc1023; - regs_buff[79] = adapter->stats.prc1522; - regs_buff[80] = adapter->stats.gprc; - regs_buff[81] = adapter->stats.bprc; - regs_buff[82] = adapter->stats.mprc; - regs_buff[83] = adapter->stats.gptc; - regs_buff[84] = adapter->stats.gorc; - regs_buff[86] = adapter->stats.gotc; - regs_buff[88] = adapter->stats.rnbc; - regs_buff[89] = adapter->stats.ruc; - regs_buff[90] = adapter->stats.rfc; - regs_buff[91] = adapter->stats.roc; - regs_buff[92] = adapter->stats.rjc; - regs_buff[93] = adapter->stats.mgprc; - regs_buff[94] = adapter->stats.mgpdc; - regs_buff[95] = adapter->stats.mgptc; - regs_buff[96] = adapter->stats.tor; - regs_buff[98] = adapter->stats.tot; - regs_buff[100] = adapter->stats.tpr; - regs_buff[101] = adapter->stats.tpt; - regs_buff[102] = adapter->stats.ptc64; - regs_buff[103] = adapter->stats.ptc127; - regs_buff[104] = adapter->stats.ptc255; - regs_buff[105] = adapter->stats.ptc511; - regs_buff[106] = adapter->stats.ptc1023; - regs_buff[107] = adapter->stats.ptc1522; - regs_buff[108] = adapter->stats.mptc; - regs_buff[109] = adapter->stats.bptc; - regs_buff[110] = adapter->stats.tsctc; - regs_buff[111] = adapter->stats.iac; - regs_buff[112] = adapter->stats.rpthc; - regs_buff[113] = adapter->stats.hgptc; - regs_buff[114] = adapter->stats.hgorc; - regs_buff[116] = adapter->stats.hgotc; - regs_buff[118] = adapter->stats.lenerrs; - regs_buff[119] = adapter->stats.scvpc; - regs_buff[120] = adapter->stats.hrmpc; - - for (i = 0; i < 4; i++) - regs_buff[121 + i] = E1000_READ_REG(hw, E1000_SRRCTL(i)); - for (i = 0; i < 4; i++) - regs_buff[125 + i] = E1000_READ_REG(hw, E1000_PSRTYPE(i)); - for (i = 0; i < 4; i++) - regs_buff[129 + i] = E1000_READ_REG(hw, E1000_RDBAL(i)); - for (i = 0; i < 4; i++) - regs_buff[133 + i] = E1000_READ_REG(hw, E1000_RDBAH(i)); - for (i = 0; i < 4; i++) - regs_buff[137 + i] = E1000_READ_REG(hw, E1000_RDLEN(i)); - for (i = 0; i < 4; i++) - regs_buff[141 + i] = E1000_READ_REG(hw, E1000_RDH(i)); - for (i = 0; i < 4; i++) - regs_buff[145 + i] = E1000_READ_REG(hw, E1000_RDT(i)); - for (i = 0; i < 4; i++) - regs_buff[149 + i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); - - for (i = 0; i < 10; i++) - regs_buff[153 + i] = E1000_READ_REG(hw, E1000_EITR(i)); - for (i = 0; i < 8; i++) - regs_buff[163 + i] = E1000_READ_REG(hw, E1000_IMIR(i)); - for (i = 0; i < 8; i++) - regs_buff[171 + i] = E1000_READ_REG(hw, E1000_IMIREXT(i)); - for (i = 0; i < 16; i++) - regs_buff[179 + i] = E1000_READ_REG(hw, E1000_RAL(i)); - for (i = 0; i < 16; i++) - regs_buff[195 + i] = E1000_READ_REG(hw, E1000_RAH(i)); - - for (i = 0; i < 4; i++) - regs_buff[211 + i] = E1000_READ_REG(hw, E1000_TDBAL(i)); - for (i = 0; i < 4; i++) - regs_buff[215 + i] = E1000_READ_REG(hw, E1000_TDBAH(i)); - for (i = 0; i < 4; i++) - regs_buff[219 + i] = E1000_READ_REG(hw, E1000_TDLEN(i)); - for (i = 0; i < 4; i++) - regs_buff[223 + i] = E1000_READ_REG(hw, E1000_TDH(i)); - for (i = 0; i < 4; i++) - regs_buff[227 + i] = E1000_READ_REG(hw, E1000_TDT(i)); - for (i = 0; i < 4; i++) - regs_buff[231 + i] = E1000_READ_REG(hw, E1000_TXDCTL(i)); - for (i = 0; i < 4; i++) - regs_buff[235 + i] = E1000_READ_REG(hw, E1000_TDWBAL(i)); - for (i = 0; i < 4; i++) - regs_buff[239 + i] = E1000_READ_REG(hw, E1000_TDWBAH(i)); - for (i = 0; i < 4; i++) - regs_buff[243 + i] = E1000_READ_REG(hw, E1000_DCA_TXCTRL(i)); - - for (i = 0; i < 4; i++) - regs_buff[247 + i] = E1000_READ_REG(hw, E1000_IP4AT_REG(i)); - for (i = 0; i < 4; i++) - regs_buff[251 + i] = E1000_READ_REG(hw, E1000_IP6AT_REG(i)); - for (i = 0; i < 32; i++) - regs_buff[255 + i] = E1000_READ_REG(hw, E1000_WUPM_REG(i)); - for (i = 0; i < 128; i++) - regs_buff[287 + i] = E1000_READ_REG(hw, E1000_FFMT_REG(i)); - for (i = 0; i < 128; i++) - regs_buff[415 + i] = E1000_READ_REG(hw, E1000_FFVT_REG(i)); - for (i = 0; i < 4; i++) - regs_buff[543 + i] = E1000_READ_REG(hw, E1000_FFLT_REG(i)); - - regs_buff[547] = E1000_READ_REG(hw, E1000_TDFH); - regs_buff[548] = E1000_READ_REG(hw, E1000_TDFT); - regs_buff[549] = E1000_READ_REG(hw, E1000_TDFHS); - regs_buff[550] = E1000_READ_REG(hw, E1000_TDFPC); - if (hw->mac.type > e1000_82580) { - regs_buff[551] = adapter->stats.o2bgptc; - regs_buff[552] = adapter->stats.b2ospc; - regs_buff[553] = adapter->stats.o2bspc; - regs_buff[554] = adapter->stats.b2ogprc; - } -} - -static int igb_get_eeprom_len(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - return adapter->hw.nvm.word_size * 2; -} - -static int igb_get_eeprom(struct net_device *netdev, - struct ethtool_eeprom *eeprom, u8 *bytes) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u16 *eeprom_buff; - int first_word, last_word; - int ret_val = 0; - u16 i; - - if (eeprom->len == 0) - return -EINVAL; - - eeprom->magic = hw->vendor_id | (hw->device_id << 16); - - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; - - eeprom_buff = kmalloc(sizeof(u16) * - (last_word - first_word + 1), GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; - - if (hw->nvm.type == e1000_nvm_eeprom_spi) - ret_val = e1000_read_nvm(hw, first_word, - last_word - first_word + 1, - eeprom_buff); - else { - for (i = 0; i < last_word - first_word + 1; i++) { - ret_val = e1000_read_nvm(hw, first_word + i, 1, - &eeprom_buff[i]); - if (ret_val) - break; - } - } - - /* Device's eeprom is always little-endian, word addressable */ - for (i = 0; i < last_word - first_word + 1; i++) - eeprom_buff[i] = le16_to_cpu(eeprom_buff[i]); - - memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), - eeprom->len); - kfree(eeprom_buff); - - return ret_val; -} - -static int igb_set_eeprom(struct net_device *netdev, - struct ethtool_eeprom *eeprom, u8 *bytes) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u16 *eeprom_buff; - void *ptr; - int max_len, first_word, last_word, ret_val = 0; - u16 i; - - if (eeprom->len == 0) - return -EOPNOTSUPP; - - if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) - return -EFAULT; - - max_len = hw->nvm.word_size * 2; - - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; - eeprom_buff = kmalloc(max_len, GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; - - ptr = (void *)eeprom_buff; - - if (eeprom->offset & 1) { - /* need read/modify/write of first changed EEPROM word */ - /* only the second byte of the word is being modified */ - ret_val = e1000_read_nvm(hw, first_word, 1, - &eeprom_buff[0]); - ptr++; - } - if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { - /* need read/modify/write of last changed EEPROM word */ - /* only the first byte of the word is being modified */ - ret_val = e1000_read_nvm(hw, last_word, 1, - &eeprom_buff[last_word - first_word]); - } - - /* Device's eeprom is always little-endian, word addressable */ - for (i = 0; i < last_word - first_word + 1; i++) - le16_to_cpus(&eeprom_buff[i]); - - memcpy(ptr, bytes, eeprom->len); - - for (i = 0; i < last_word - first_word + 1; i++) - cpu_to_le16s(&eeprom_buff[i]); - - ret_val = e1000_write_nvm(hw, first_word, - last_word - first_word + 1, eeprom_buff); - - /* Update the checksum if write succeeded. - * and flush shadow RAM for 82573 controllers */ - if (ret_val == 0) - e1000_update_nvm_checksum(hw); - - kfree(eeprom_buff); - return ret_val; -} - -static void igb_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - strncpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver) - 1); - strncpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version) - 1); - - strlcpy(drvinfo->fw_version, adapter->fw_version, - sizeof(drvinfo->fw_version)); - strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), - sizeof(drvinfo->bus_info)); - drvinfo->n_stats = IGB_STATS_LEN; - drvinfo->testinfo_len = IGB_TEST_LEN; - drvinfo->regdump_len = igb_get_regs_len(netdev); - drvinfo->eedump_len = igb_get_eeprom_len(netdev); -} - -static void igb_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - ring->rx_max_pending = IGB_MAX_RXD; - ring->tx_max_pending = IGB_MAX_TXD; - ring->rx_mini_max_pending = 0; - ring->rx_jumbo_max_pending = 0; - ring->rx_pending = adapter->rx_ring_count; - ring->tx_pending = adapter->tx_ring_count; - ring->rx_mini_pending = 0; - ring->rx_jumbo_pending = 0; -} - -static int igb_set_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct igb_ring *temp_ring; - int i, err = 0; - u16 new_rx_count, new_tx_count; - - if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) - return -EINVAL; - - new_rx_count = min(ring->rx_pending, (u32)IGB_MAX_RXD); - new_rx_count = max(new_rx_count, (u16)IGB_MIN_RXD); - new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE); - - new_tx_count = min(ring->tx_pending, (u32)IGB_MAX_TXD); - new_tx_count = max(new_tx_count, (u16)IGB_MIN_TXD); - new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE); - - if ((new_tx_count == adapter->tx_ring_count) && - (new_rx_count == adapter->rx_ring_count)) { - /* nothing to do */ - return 0; - } - - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - - if (!netif_running(adapter->netdev)) { - for (i = 0; i < adapter->num_tx_queues; i++) - adapter->tx_ring[i]->count = new_tx_count; - for (i = 0; i < adapter->num_rx_queues; i++) - adapter->rx_ring[i]->count = new_rx_count; - adapter->tx_ring_count = new_tx_count; - adapter->rx_ring_count = new_rx_count; - goto clear_reset; - } - - if (adapter->num_tx_queues > adapter->num_rx_queues) - temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); - else - temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); - - if (!temp_ring) { - err = -ENOMEM; - goto clear_reset; - } - - igb_down(adapter); - - /* - * We can't just free everything and then setup again, - * because the ISRs in MSI-X mode get passed pointers - * to the tx and rx ring structs. - */ - if (new_tx_count != adapter->tx_ring_count) { - for (i = 0; i < adapter->num_tx_queues; i++) { - memcpy(&temp_ring[i], adapter->tx_ring[i], - sizeof(struct igb_ring)); - - temp_ring[i].count = new_tx_count; - err = igb_setup_tx_resources(&temp_ring[i]); - if (err) { - while (i) { - i--; - igb_free_tx_resources(&temp_ring[i]); - } - goto err_setup; - } - } - - for (i = 0; i < adapter->num_tx_queues; i++) { - igb_free_tx_resources(adapter->tx_ring[i]); - - memcpy(adapter->tx_ring[i], &temp_ring[i], - sizeof(struct igb_ring)); - } - - adapter->tx_ring_count = new_tx_count; - } - - if (new_rx_count != adapter->rx_ring_count) { - for (i = 0; i < adapter->num_rx_queues; i++) { - memcpy(&temp_ring[i], adapter->rx_ring[i], - sizeof(struct igb_ring)); - - temp_ring[i].count = new_rx_count; - err = igb_setup_rx_resources(&temp_ring[i]); - if (err) { - while (i) { - i--; - igb_free_rx_resources(&temp_ring[i]); - } - goto err_setup; - } - - } - - for (i = 0; i < adapter->num_rx_queues; i++) { - igb_free_rx_resources(adapter->rx_ring[i]); - - memcpy(adapter->rx_ring[i], &temp_ring[i], - sizeof(struct igb_ring)); - } - - adapter->rx_ring_count = new_rx_count; - } -err_setup: - igb_up(adapter); - vfree(temp_ring); -clear_reset: - clear_bit(__IGB_RESETTING, &adapter->state); - return err; -} -static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data, - int reg, u32 mask, u32 write) -{ - struct e1000_hw *hw = &adapter->hw; - u32 pat, val; - static const u32 _test[] = - {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; - for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { - E1000_WRITE_REG(hw, reg, (_test[pat] & write)); - val = E1000_READ_REG(hw, reg) & mask; - if (val != (_test[pat] & write & mask)) { - dev_err(pci_dev_to_dev(adapter->pdev), "pattern test reg %04X " - "failed: got 0x%08X expected 0x%08X\n", - E1000_REGISTER(hw, reg), val, (_test[pat] & write & mask)); - *data = E1000_REGISTER(hw, reg); - return 1; - } - } - - return 0; -} - -static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data, - int reg, u32 mask, u32 write) -{ - struct e1000_hw *hw = &adapter->hw; - u32 val; - E1000_WRITE_REG(hw, reg, write & mask); - val = E1000_READ_REG(hw, reg); - if ((write & mask) != (val & mask)) { - dev_err(pci_dev_to_dev(adapter->pdev), "set/check reg %04X test failed:" - " got 0x%08X expected 0x%08X\n", reg, - (val & mask), (write & mask)); - *data = E1000_REGISTER(hw, reg); - return 1; - } - - return 0; -} - -#define REG_PATTERN_TEST(reg, mask, write) \ - do { \ - if (reg_pattern_test(adapter, data, reg, mask, write)) \ - return 1; \ - } while (0) - -#define REG_SET_AND_CHECK(reg, mask, write) \ - do { \ - if (reg_set_and_check(adapter, data, reg, mask, write)) \ - return 1; \ - } while (0) - -static int igb_reg_test(struct igb_adapter *adapter, u64 *data) -{ - struct e1000_hw *hw = &adapter->hw; - struct igb_reg_test *test; - u32 value, before, after; - u32 i, toggle; - - switch (adapter->hw.mac.type) { - case e1000_i350: - case e1000_i354: - test = reg_test_i350; - toggle = 0x7FEFF3FF; - break; - case e1000_i210: - case e1000_i211: - test = reg_test_i210; - toggle = 0x7FEFF3FF; - break; - case e1000_82580: - test = reg_test_82580; - toggle = 0x7FEFF3FF; - break; - case e1000_82576: - test = reg_test_82576; - toggle = 0x7FFFF3FF; - break; - default: - test = reg_test_82575; - toggle = 0x7FFFF3FF; - break; - } - - /* Because the status register is such a special case, - * we handle it separately from the rest of the register - * tests. Some bits are read-only, some toggle, and some - * are writable on newer MACs. - */ - before = E1000_READ_REG(hw, E1000_STATUS); - value = (E1000_READ_REG(hw, E1000_STATUS) & toggle); - E1000_WRITE_REG(hw, E1000_STATUS, toggle); - after = E1000_READ_REG(hw, E1000_STATUS) & toggle; - if (value != after) { - dev_err(pci_dev_to_dev(adapter->pdev), "failed STATUS register test " - "got: 0x%08X expected: 0x%08X\n", after, value); - *data = 1; - return 1; - } - /* restore previous status */ - E1000_WRITE_REG(hw, E1000_STATUS, before); - - /* Perform the remainder of the register test, looping through - * the test table until we either fail or reach the null entry. - */ - while (test->reg) { - for (i = 0; i < test->array_len; i++) { - switch (test->test_type) { - case PATTERN_TEST: - REG_PATTERN_TEST(test->reg + - (i * test->reg_offset), - test->mask, - test->write); - break; - case SET_READ_TEST: - REG_SET_AND_CHECK(test->reg + - (i * test->reg_offset), - test->mask, - test->write); - break; - case WRITE_NO_TEST: - writel(test->write, - (adapter->hw.hw_addr + test->reg) - + (i * test->reg_offset)); - break; - case TABLE32_TEST: - REG_PATTERN_TEST(test->reg + (i * 4), - test->mask, - test->write); - break; - case TABLE64_TEST_LO: - REG_PATTERN_TEST(test->reg + (i * 8), - test->mask, - test->write); - break; - case TABLE64_TEST_HI: - REG_PATTERN_TEST((test->reg + 4) + (i * 8), - test->mask, - test->write); - break; - } - } - test++; - } - - *data = 0; - return 0; -} - -static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data) -{ - *data = 0; - - /* Validate NVM checksum */ - if (e1000_validate_nvm_checksum(&adapter->hw) < 0) - *data = 2; - - return *data; -} - -static irqreturn_t igb_test_intr(int irq, void *data) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - - adapter->test_icr |= E1000_READ_REG(hw, E1000_ICR); - - return IRQ_HANDLED; -} - -static int igb_intr_test(struct igb_adapter *adapter, u64 *data) -{ - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 mask, ics_mask, i = 0, shared_int = TRUE; - u32 irq = adapter->pdev->irq; - - *data = 0; - - /* Hook up test interrupt handler just for this test */ - if (adapter->msix_entries) { - if (request_irq(adapter->msix_entries[0].vector, - &igb_test_intr, 0, netdev->name, adapter)) { - *data = 1; - return -1; - } - } else if (adapter->flags & IGB_FLAG_HAS_MSI) { - shared_int = FALSE; - if (request_irq(irq, - igb_test_intr, 0, netdev->name, adapter)) { - *data = 1; - return -1; - } - } else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED, - netdev->name, adapter)) { - shared_int = FALSE; - } else if (request_irq(irq, &igb_test_intr, IRQF_SHARED, - netdev->name, adapter)) { - *data = 1; - return -1; - } - dev_info(pci_dev_to_dev(adapter->pdev), "testing %s interrupt\n", - (shared_int ? "shared" : "unshared")); - - /* Disable all the interrupts */ - E1000_WRITE_REG(hw, E1000_IMC, ~0); - E1000_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - /* Define all writable bits for ICS */ - switch (hw->mac.type) { - case e1000_82575: - ics_mask = 0x37F47EDD; - break; - case e1000_82576: - ics_mask = 0x77D4FBFD; - break; - case e1000_82580: - ics_mask = 0x77DCFED5; - break; - case e1000_i350: - case e1000_i354: - ics_mask = 0x77DCFED5; - break; - case e1000_i210: - case e1000_i211: - ics_mask = 0x774CFED5; - break; - default: - ics_mask = 0x7FFFFFFF; - break; - } - - /* Test each interrupt */ - for (; i < 31; i++) { - /* Interrupt to test */ - mask = 1 << i; - - if (!(mask & ics_mask)) - continue; - - if (!shared_int) { - /* Disable the interrupt to be reported in - * the cause register and then force the same - * interrupt and see if one gets posted. If - * an interrupt was posted to the bus, the - * test failed. - */ - adapter->test_icr = 0; - - /* Flush any pending interrupts */ - E1000_WRITE_REG(hw, E1000_ICR, ~0); - - E1000_WRITE_REG(hw, E1000_IMC, mask); - E1000_WRITE_REG(hw, E1000_ICS, mask); - E1000_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - if (adapter->test_icr & mask) { - *data = 3; - break; - } - } - - /* Enable the interrupt to be reported in - * the cause register and then force the same - * interrupt and see if one gets posted. If - * an interrupt was not posted to the bus, the - * test failed. - */ - adapter->test_icr = 0; - - /* Flush any pending interrupts */ - E1000_WRITE_REG(hw, E1000_ICR, ~0); - - E1000_WRITE_REG(hw, E1000_IMS, mask); - E1000_WRITE_REG(hw, E1000_ICS, mask); - E1000_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - if (!(adapter->test_icr & mask)) { - *data = 4; - break; - } - - if (!shared_int) { - /* Disable the other interrupts to be reported in - * the cause register and then force the other - * interrupts and see if any get posted. If - * an interrupt was posted to the bus, the - * test failed. - */ - adapter->test_icr = 0; - - /* Flush any pending interrupts */ - E1000_WRITE_REG(hw, E1000_ICR, ~0); - - E1000_WRITE_REG(hw, E1000_IMC, ~mask); - E1000_WRITE_REG(hw, E1000_ICS, ~mask); - E1000_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - if (adapter->test_icr & mask) { - *data = 5; - break; - } - } - } - - /* Disable all the interrupts */ - E1000_WRITE_REG(hw, E1000_IMC, ~0); - E1000_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - /* Unhook test interrupt handler */ - if (adapter->msix_entries) - free_irq(adapter->msix_entries[0].vector, adapter); - else - free_irq(irq, adapter); - - return *data; -} - -static void igb_free_desc_rings(struct igb_adapter *adapter) -{ - igb_free_tx_resources(&adapter->test_tx_ring); - igb_free_rx_resources(&adapter->test_rx_ring); -} - -static int igb_setup_desc_rings(struct igb_adapter *adapter) -{ - struct igb_ring *tx_ring = &adapter->test_tx_ring; - struct igb_ring *rx_ring = &adapter->test_rx_ring; - struct e1000_hw *hw = &adapter->hw; - int ret_val; - - /* Setup Tx descriptor ring and Tx buffers */ - tx_ring->count = IGB_DEFAULT_TXD; - tx_ring->dev = pci_dev_to_dev(adapter->pdev); - tx_ring->netdev = adapter->netdev; - tx_ring->reg_idx = adapter->vfs_allocated_count; - - if (igb_setup_tx_resources(tx_ring)) { - ret_val = 1; - goto err_nomem; - } - - igb_setup_tctl(adapter); - igb_configure_tx_ring(adapter, tx_ring); - - /* Setup Rx descriptor ring and Rx buffers */ - rx_ring->count = IGB_DEFAULT_RXD; - rx_ring->dev = pci_dev_to_dev(adapter->pdev); - rx_ring->netdev = adapter->netdev; -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - rx_ring->rx_buffer_len = IGB_RX_HDR_LEN; -#endif - rx_ring->reg_idx = adapter->vfs_allocated_count; - - if (igb_setup_rx_resources(rx_ring)) { - ret_val = 2; - goto err_nomem; - } - - /* set the default queue to queue 0 of PF */ - E1000_WRITE_REG(hw, E1000_MRQC, adapter->vfs_allocated_count << 3); - - /* enable receive ring */ - igb_setup_rctl(adapter); - igb_configure_rx_ring(adapter, rx_ring); - - igb_alloc_rx_buffers(rx_ring, igb_desc_unused(rx_ring)); - - return 0; - -err_nomem: - igb_free_desc_rings(adapter); - return ret_val; -} - -static void igb_phy_disable_receiver(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - /* Write out to PHY registers 29 and 30 to disable the Receiver. */ - e1000_write_phy_reg(hw, 29, 0x001F); - e1000_write_phy_reg(hw, 30, 0x8FFC); - e1000_write_phy_reg(hw, 29, 0x001A); - e1000_write_phy_reg(hw, 30, 0x8FF0); -} - -static int igb_integrated_phy_loopback(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_reg = 0; - - hw->mac.autoneg = FALSE; - - if (hw->phy.type == e1000_phy_m88) { - if (hw->phy.id != I210_I_PHY_ID) { - /* Auto-MDI/MDIX Off */ - e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); - /* reset to update Auto-MDI/MDIX */ - e1000_write_phy_reg(hw, PHY_CONTROL, 0x9140); - /* autoneg off */ - e1000_write_phy_reg(hw, PHY_CONTROL, 0x8140); - } else { - /* force 1000, set loopback */ - e1000_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); - e1000_write_phy_reg(hw, PHY_CONTROL, 0x4140); - } - } else { - /* enable MII loopback */ - if (hw->phy.type == e1000_phy_82580) - e1000_write_phy_reg(hw, I82577_PHY_LBK_CTRL, 0x8041); - } - - /* force 1000, set loopback */ - e1000_write_phy_reg(hw, PHY_CONTROL, 0x4140); - - /* Now set up the MAC to the same speed/duplex as the PHY. */ - ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); - ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ - ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ - E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ - E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ - E1000_CTRL_FD | /* Force Duplex to FULL */ - E1000_CTRL_SLU); /* Set link up enable bit */ - - if (hw->phy.type == e1000_phy_m88) - ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); - - /* Disable the receiver on the PHY so when a cable is plugged in, the - * PHY does not begin to autoneg when a cable is reconnected to the NIC. - */ - if (hw->phy.type == e1000_phy_m88) - igb_phy_disable_receiver(adapter); - - mdelay(500); - return 0; -} - -static int igb_set_phy_loopback(struct igb_adapter *adapter) -{ - return igb_integrated_phy_loopback(adapter); -} - -static int igb_setup_loopback_test(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 reg; - - reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - - /* use CTRL_EXT to identify link type as SGMII can appear as copper */ - if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) { - if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) || - (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) || - (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) || - (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) { - - /* Enable DH89xxCC MPHY for near end loopback */ - reg = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTL); - reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) | - E1000_MPHY_PCS_CLK_REG_OFFSET; - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTL, reg); - - reg = E1000_READ_REG(hw, E1000_MPHY_DATA); - reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN; - E1000_WRITE_REG(hw, E1000_MPHY_DATA, reg); - } - - reg = E1000_READ_REG(hw, E1000_RCTL); - reg |= E1000_RCTL_LBM_TCVR; - E1000_WRITE_REG(hw, E1000_RCTL, reg); - - E1000_WRITE_REG(hw, E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK); - - reg = E1000_READ_REG(hw, E1000_CTRL); - reg &= ~(E1000_CTRL_RFCE | - E1000_CTRL_TFCE | - E1000_CTRL_LRST); - reg |= E1000_CTRL_SLU | - E1000_CTRL_FD; - E1000_WRITE_REG(hw, E1000_CTRL, reg); - - /* Unset switch control to serdes energy detect */ - reg = E1000_READ_REG(hw, E1000_CONNSW); - reg &= ~E1000_CONNSW_ENRGSRC; - E1000_WRITE_REG(hw, E1000_CONNSW, reg); - - /* Unset sigdetect for SERDES loopback on - * 82580 and newer devices - */ - if (hw->mac.type >= e1000_82580) { - reg = E1000_READ_REG(hw, E1000_PCS_CFG0); - reg |= E1000_PCS_CFG_IGN_SD; - E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); - } - - /* Set PCS register for forced speed */ - reg = E1000_READ_REG(hw, E1000_PCS_LCTL); - reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/ - reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ - E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ - E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ - E1000_PCS_LCTL_FSD | /* Force Speed */ - E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ - E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); - - return 0; - } - - return igb_set_phy_loopback(adapter); -} - -static void igb_loopback_cleanup(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 rctl; - u16 phy_reg; - - if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) || - (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) || - (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) || - (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) { - u32 reg; - - /* Disable near end loopback on DH89xxCC */ - reg = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTL); - reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK ) | - E1000_MPHY_PCS_CLK_REG_OFFSET; - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTL, reg); - - reg = E1000_READ_REG(hw, E1000_MPHY_DATA); - reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN; - E1000_WRITE_REG(hw, E1000_MPHY_DATA, reg); - } - - rctl = E1000_READ_REG(hw, E1000_RCTL); - rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - - hw->mac.autoneg = TRUE; - e1000_read_phy_reg(hw, PHY_CONTROL, &phy_reg); - if (phy_reg & MII_CR_LOOPBACK) { - phy_reg &= ~MII_CR_LOOPBACK; - if (hw->phy.type == I210_I_PHY_ID) - e1000_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); - e1000_write_phy_reg(hw, PHY_CONTROL, phy_reg); - e1000_phy_commit(hw); - } -} -static void igb_create_lbtest_frame(struct sk_buff *skb, - unsigned int frame_size) -{ - memset(skb->data, 0xFF, frame_size); - frame_size /= 2; - memset(&skb->data[frame_size], 0xAA, frame_size - 1); - memset(&skb->data[frame_size + 10], 0xBE, 1); - memset(&skb->data[frame_size + 12], 0xAF, 1); -} - -static int igb_check_lbtest_frame(struct igb_rx_buffer *rx_buffer, - unsigned int frame_size) -{ - unsigned char *data; - bool match = true; - - frame_size >>= 1; - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - data = rx_buffer->skb->data; -#else - data = kmap(rx_buffer->page); -#endif - - if (data[3] != 0xFF || - data[frame_size + 10] != 0xBE || - data[frame_size + 12] != 0xAF) - match = false; - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - kunmap(rx_buffer->page); - -#endif - return match; -} - -static u16 igb_clean_test_rings(struct igb_ring *rx_ring, - struct igb_ring *tx_ring, - unsigned int size) -{ - union e1000_adv_rx_desc *rx_desc; - struct igb_rx_buffer *rx_buffer_info; - struct igb_tx_buffer *tx_buffer_info; - u16 rx_ntc, tx_ntc, count = 0; - - /* initialize next to clean and descriptor values */ - rx_ntc = rx_ring->next_to_clean; - tx_ntc = tx_ring->next_to_clean; - rx_desc = IGB_RX_DESC(rx_ring, rx_ntc); - - while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) { - /* check rx buffer */ - rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc]; - - /* sync Rx buffer for CPU read */ - dma_sync_single_for_cpu(rx_ring->dev, - rx_buffer_info->dma, -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - IGB_RX_HDR_LEN, -#else - IGB_RX_BUFSZ, -#endif - DMA_FROM_DEVICE); - - /* verify contents of skb */ - if (igb_check_lbtest_frame(rx_buffer_info, size)) - count++; - - /* sync Rx buffer for device write */ - dma_sync_single_for_device(rx_ring->dev, - rx_buffer_info->dma, -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - IGB_RX_HDR_LEN, -#else - IGB_RX_BUFSZ, -#endif - DMA_FROM_DEVICE); - - /* unmap buffer on tx side */ - tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc]; - igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); - - /* increment rx/tx next to clean counters */ - rx_ntc++; - if (rx_ntc == rx_ring->count) - rx_ntc = 0; - tx_ntc++; - if (tx_ntc == tx_ring->count) - tx_ntc = 0; - - /* fetch next descriptor */ - rx_desc = IGB_RX_DESC(rx_ring, rx_ntc); - } - - /* re-map buffers to ring, store next to clean values */ - igb_alloc_rx_buffers(rx_ring, count); - rx_ring->next_to_clean = rx_ntc; - tx_ring->next_to_clean = tx_ntc; - - return count; -} - -static int igb_run_loopback_test(struct igb_adapter *adapter) -{ - struct igb_ring *tx_ring = &adapter->test_tx_ring; - struct igb_ring *rx_ring = &adapter->test_rx_ring; - u16 i, j, lc, good_cnt; - int ret_val = 0; - unsigned int size = IGB_RX_HDR_LEN; - netdev_tx_t tx_ret_val; - struct sk_buff *skb; - - /* allocate test skb */ - skb = alloc_skb(size, GFP_KERNEL); - if (!skb) - return 11; - - /* place data into test skb */ - igb_create_lbtest_frame(skb, size); - skb_put(skb, size); - - /* - * Calculate the loop count based on the largest descriptor ring - * The idea is to wrap the largest ring a number of times using 64 - * send/receive pairs during each loop - */ - - if (rx_ring->count <= tx_ring->count) - lc = ((tx_ring->count / 64) * 2) + 1; - else - lc = ((rx_ring->count / 64) * 2) + 1; - - for (j = 0; j <= lc; j++) { /* loop count loop */ - /* reset count of good packets */ - good_cnt = 0; - - /* place 64 packets on the transmit queue*/ - for (i = 0; i < 64; i++) { - skb_get(skb); - tx_ret_val = igb_xmit_frame_ring(skb, tx_ring); - if (tx_ret_val == NETDEV_TX_OK) - good_cnt++; - } - - if (good_cnt != 64) { - ret_val = 12; - break; - } - - /* allow 200 milliseconds for packets to go from tx to rx */ - msleep(200); - - good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size); - if (good_cnt != 64) { - ret_val = 13; - break; - } - } /* end loop count loop */ - - /* free the original skb */ - kfree_skb(skb); - - return ret_val; -} - -static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) -{ - /* PHY loopback cannot be performed if SoL/IDER - * sessions are active */ - if (e1000_check_reset_block(&adapter->hw)) { - dev_err(pci_dev_to_dev(adapter->pdev), - "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); - *data = 0; - goto out; - } - if (adapter->hw.mac.type == e1000_i354) { - dev_info(&adapter->pdev->dev, - "Loopback test not supported on i354.\n"); - *data = 0; - goto out; - } - *data = igb_setup_desc_rings(adapter); - if (*data) - goto out; - *data = igb_setup_loopback_test(adapter); - if (*data) - goto err_loopback; - *data = igb_run_loopback_test(adapter); - - igb_loopback_cleanup(adapter); - -err_loopback: - igb_free_desc_rings(adapter); -out: - return *data; -} - -static int igb_link_test(struct igb_adapter *adapter, u64 *data) -{ - u32 link; - int i, time; - - *data = 0; - time = 0; - if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { - int i = 0; - adapter->hw.mac.serdes_has_link = FALSE; - - /* On some blade server designs, link establishment - * could take as long as 2-3 minutes */ - do { - e1000_check_for_link(&adapter->hw); - if (adapter->hw.mac.serdes_has_link) - goto out; - msleep(20); - } while (i++ < 3750); - - *data = 1; - } else { - for (i=0; i < IGB_MAX_LINK_TRIES; i++) { - link = igb_has_link(adapter); - if (link) - goto out; - else { - time++; - msleep(1000); - } - } - if (!link) - *data = 1; - } - out: - return *data; -} - -static void igb_diag_test(struct net_device *netdev, - struct ethtool_test *eth_test, u64 *data) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - u16 autoneg_advertised; - u8 forced_speed_duplex, autoneg; - bool if_running = netif_running(netdev); - - set_bit(__IGB_TESTING, &adapter->state); - if (eth_test->flags == ETH_TEST_FL_OFFLINE) { - /* Offline tests */ - - /* save speed, duplex, autoneg settings */ - autoneg_advertised = adapter->hw.phy.autoneg_advertised; - forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; - autoneg = adapter->hw.mac.autoneg; - - dev_info(pci_dev_to_dev(adapter->pdev), "offline testing starting\n"); - - /* power up link for link test */ - igb_power_up_link(adapter); - - /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ - if (igb_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - if (if_running) - /* indicate we're in test mode */ - dev_close(netdev); - else - igb_reset(adapter); - - if (igb_reg_test(adapter, &data[0])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - igb_reset(adapter); - if (igb_eeprom_test(adapter, &data[1])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - igb_reset(adapter); - if (igb_intr_test(adapter, &data[2])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - igb_reset(adapter); - - /* power up link for loopback test */ - igb_power_up_link(adapter); - - if (igb_loopback_test(adapter, &data[3])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - /* restore speed, duplex, autoneg settings */ - adapter->hw.phy.autoneg_advertised = autoneg_advertised; - adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; - adapter->hw.mac.autoneg = autoneg; - - /* force this routine to wait until autoneg complete/timeout */ - adapter->hw.phy.autoneg_wait_to_complete = TRUE; - igb_reset(adapter); - adapter->hw.phy.autoneg_wait_to_complete = FALSE; - - clear_bit(__IGB_TESTING, &adapter->state); - if (if_running) - dev_open(netdev); - } else { - dev_info(pci_dev_to_dev(adapter->pdev), "online testing starting\n"); - - /* PHY is powered down when interface is down */ - if (if_running && igb_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - else - data[4] = 0; - - /* Online tests aren't run; pass by default */ - data[0] = 0; - data[1] = 0; - data[2] = 0; - data[3] = 0; - - clear_bit(__IGB_TESTING, &adapter->state); - } - msleep_interruptible(4 * 1000); -} - -static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - wol->supported = WAKE_UCAST | WAKE_MCAST | - WAKE_BCAST | WAKE_MAGIC | - WAKE_PHY; - wol->wolopts = 0; - - if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) - return; - - /* apply any specific unsupported masks here */ - switch (adapter->hw.device_id) { - default: - break; - } - - if (adapter->wol & E1000_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & E1000_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & E1000_WUFC_BC) - wol->wolopts |= WAKE_BCAST; - if (adapter->wol & E1000_WUFC_MAG) - wol->wolopts |= WAKE_MAGIC; - if (adapter->wol & E1000_WUFC_LNKC) - wol->wolopts |= WAKE_PHY; -} - -static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; - - if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) - return wol->wolopts ? -EOPNOTSUPP : 0; - - /* these settings will always override what we currently have */ - adapter->wol = 0; - - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= E1000_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= E1000_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= E1000_WUFC_BC; - if (wol->wolopts & WAKE_MAGIC) - adapter->wol |= E1000_WUFC_MAG; - if (wol->wolopts & WAKE_PHY) - adapter->wol |= E1000_WUFC_LNKC; - device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); - - return 0; -} - -/* bit defines for adapter->led_status */ -#ifdef HAVE_ETHTOOL_SET_PHYS_ID -static int igb_set_phys_id(struct net_device *netdev, - enum ethtool_phys_id_state state) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - switch (state) { - case ETHTOOL_ID_ACTIVE: - e1000_blink_led(hw); - return 2; - case ETHTOOL_ID_ON: - e1000_led_on(hw); - break; - case ETHTOOL_ID_OFF: - e1000_led_off(hw); - break; - case ETHTOOL_ID_INACTIVE: - e1000_led_off(hw); - e1000_cleanup_led(hw); - break; - } - - return 0; -} -#else -static int igb_phys_id(struct net_device *netdev, u32 data) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - unsigned long timeout; - - timeout = data * 1000; - - /* - * msleep_interruptable only accepts unsigned int so we are limited - * in how long a duration we can wait - */ - if (!timeout || timeout > UINT_MAX) - timeout = UINT_MAX; - - e1000_blink_led(hw); - msleep_interruptible(timeout); - - e1000_led_off(hw); - e1000_cleanup_led(hw); - - return 0; -} -#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ - -static int igb_set_coalesce(struct net_device *netdev, - struct ethtool_coalesce *ec) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - int i; - - if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) || - ((ec->rx_coalesce_usecs > 3) && - (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) || - (ec->rx_coalesce_usecs == 2)) - { - printk("set_coalesce:invalid parameter.."); - return -EINVAL; - } - - if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) || - ((ec->tx_coalesce_usecs > 3) && - (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) || - (ec->tx_coalesce_usecs == 2)) - return -EINVAL; - - if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs) - return -EINVAL; - - if (ec->tx_max_coalesced_frames_irq) - adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq; - - /* If ITR is disabled, disable DMAC */ - if (ec->rx_coalesce_usecs == 0) { - adapter->dmac = IGB_DMAC_DISABLE; - } - - /* convert to rate of irq's per second */ - if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) - adapter->rx_itr_setting = ec->rx_coalesce_usecs; - else - adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2; - - /* convert to rate of irq's per second */ - if (adapter->flags & IGB_FLAG_QUEUE_PAIRS) - adapter->tx_itr_setting = adapter->rx_itr_setting; - else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3) - adapter->tx_itr_setting = ec->tx_coalesce_usecs; - else - adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2; - - for (i = 0; i < adapter->num_q_vectors; i++) { - struct igb_q_vector *q_vector = adapter->q_vector[i]; - q_vector->tx.work_limit = adapter->tx_work_limit; - if (q_vector->rx.ring) - q_vector->itr_val = adapter->rx_itr_setting; - else - q_vector->itr_val = adapter->tx_itr_setting; - if (q_vector->itr_val && q_vector->itr_val <= 3) - q_vector->itr_val = IGB_START_ITR; - q_vector->set_itr = 1; - } - - return 0; -} - -static int igb_get_coalesce(struct net_device *netdev, - struct ethtool_coalesce *ec) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - if (adapter->rx_itr_setting <= 3) - ec->rx_coalesce_usecs = adapter->rx_itr_setting; - else - ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2; - - ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit; - - if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) { - if (adapter->tx_itr_setting <= 3) - ec->tx_coalesce_usecs = adapter->tx_itr_setting; - else - ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2; - } - - return 0; -} - -static int igb_nway_reset(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - if (netif_running(netdev)) - igb_reinit_locked(adapter); - return 0; -} - -#ifdef HAVE_ETHTOOL_GET_SSET_COUNT -static int igb_get_sset_count(struct net_device *netdev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return IGB_STATS_LEN; - case ETH_SS_TEST: - return IGB_TEST_LEN; - default: - return -ENOTSUPP; - } -} -#else -static int igb_get_stats_count(struct net_device *netdev) -{ - return IGB_STATS_LEN; -} - -static int igb_diag_test_count(struct net_device *netdev) -{ - return IGB_TEST_LEN; -} -#endif - -static void igb_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, u64 *data) -{ - struct igb_adapter *adapter = netdev_priv(netdev); -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - struct net_device_stats *net_stats = &netdev->stats; -#else - struct net_device_stats *net_stats = &adapter->net_stats; -#endif - u64 *queue_stat; - int i, j, k; - char *p; - - igb_update_stats(adapter); - - for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { - p = (char *)adapter + igb_gstrings_stats[i].stat_offset; - data[i] = (igb_gstrings_stats[i].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; - } - for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) { - p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset; - data[i] = (igb_gstrings_net_stats[j].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; - } - for (j = 0; j < adapter->num_tx_queues; j++) { - queue_stat = (u64 *)&adapter->tx_ring[j]->tx_stats; - for (k = 0; k < IGB_TX_QUEUE_STATS_LEN; k++, i++) - data[i] = queue_stat[k]; - } - for (j = 0; j < adapter->num_rx_queues; j++) { - queue_stat = (u64 *)&adapter->rx_ring[j]->rx_stats; - for (k = 0; k < IGB_RX_QUEUE_STATS_LEN; k++, i++) - data[i] = queue_stat[k]; - } -} - -static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - u8 *p = data; - int i; - - switch (stringset) { - case ETH_SS_TEST: - memcpy(data, *igb_gstrings_test, - IGB_TEST_LEN*ETH_GSTRING_LEN); - break; - case ETH_SS_STATS: - for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { - memcpy(p, igb_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) { - memcpy(p, igb_gstrings_net_stats[i].stat_string, - ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < adapter->num_tx_queues; i++) { - sprintf(p, "tx_queue_%u_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "tx_queue_%u_bytes", i); - p += ETH_GSTRING_LEN; - sprintf(p, "tx_queue_%u_restart", i); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < adapter->num_rx_queues; i++) { - sprintf(p, "rx_queue_%u_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_bytes", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_drops", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_csum_err", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_alloc_failed", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_ipv4_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_ipv4e_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_ipv6_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_ipv6e_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_tcp_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_udp_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_sctp_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_nfs_packets", i); - p += ETH_GSTRING_LEN; - } -/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */ - break; - } -} - -#ifdef HAVE_ETHTOOL_GET_TS_INFO -static int igb_get_ts_info(struct net_device *dev, - struct ethtool_ts_info *info) -{ - struct igb_adapter *adapter = netdev_priv(dev); - - switch (adapter->hw.mac.type) { -#ifdef HAVE_PTP_1588_CLOCK - case e1000_82575: - info->so_timestamping = - SOF_TIMESTAMPING_TX_SOFTWARE | - SOF_TIMESTAMPING_RX_SOFTWARE | - SOF_TIMESTAMPING_SOFTWARE; - return 0; - case e1000_82576: - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - info->so_timestamping = - SOF_TIMESTAMPING_TX_SOFTWARE | - SOF_TIMESTAMPING_RX_SOFTWARE | - SOF_TIMESTAMPING_SOFTWARE | - SOF_TIMESTAMPING_TX_HARDWARE | - SOF_TIMESTAMPING_RX_HARDWARE | - SOF_TIMESTAMPING_RAW_HARDWARE; - - if (adapter->ptp_clock) - info->phc_index = ptp_clock_index(adapter->ptp_clock); - else - info->phc_index = -1; - - info->tx_types = - (1 << HWTSTAMP_TX_OFF) | - (1 << HWTSTAMP_TX_ON); - - info->rx_filters = 1 << HWTSTAMP_FILTER_NONE; - - /* 82576 does not support timestamping all packets. */ - if (adapter->hw.mac.type >= e1000_82580) - info->rx_filters |= 1 << HWTSTAMP_FILTER_ALL; - else - info->rx_filters |= - (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); - - return 0; -#endif /* HAVE_PTP_1588_CLOCK */ - default: - return -EOPNOTSUPP; - } -} -#endif /* HAVE_ETHTOOL_GET_TS_INFO */ - -#ifdef CONFIG_PM_RUNTIME -static int igb_ethtool_begin(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - pm_runtime_get_sync(&adapter->pdev->dev); - - return 0; -} - -static void igb_ethtool_complete(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - pm_runtime_put(&adapter->pdev->dev); -} -#endif /* CONFIG_PM_RUNTIME */ - -#ifndef HAVE_NDO_SET_FEATURES -static u32 igb_get_rx_csum(struct net_device *netdev) -{ - return !!(netdev->features & NETIF_F_RXCSUM); -} - -static int igb_set_rx_csum(struct net_device *netdev, u32 data) -{ - const u32 feature_list = NETIF_F_RXCSUM; - - if (data) - netdev->features |= feature_list; - else - netdev->features &= ~feature_list; - - return 0; -} - -static int igb_set_tx_csum(struct net_device *netdev, u32 data) -{ - struct igb_adapter *adapter = netdev_priv(netdev); -#ifdef NETIF_F_IPV6_CSUM - u32 feature_list = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; -#else - u32 feature_list = NETIF_F_IP_CSUM; -#endif - - if (adapter->hw.mac.type >= e1000_82576) - feature_list |= NETIF_F_SCTP_CSUM; - - if (data) - netdev->features |= feature_list; - else - netdev->features &= ~feature_list; - - return 0; -} - -#ifdef NETIF_F_TSO -static int igb_set_tso(struct net_device *netdev, u32 data) -{ -#ifdef NETIF_F_TSO6 - const u32 feature_list = NETIF_F_TSO | NETIF_F_TSO6; -#else - const u32 feature_list = NETIF_F_TSO; -#endif - - if (data) - netdev->features |= feature_list; - else - netdev->features &= ~feature_list; - -#ifndef HAVE_NETDEV_VLAN_FEATURES - if (!data) { - struct igb_adapter *adapter = netdev_priv(netdev); - struct net_device *v_netdev; - int i; - - /* disable TSO on all VLANs if they're present */ - if (!adapter->vlgrp) - goto tso_out; - - for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { - v_netdev = vlan_group_get_device(adapter->vlgrp, i); - if (!v_netdev) - continue; - - v_netdev->features &= ~feature_list; - vlan_group_set_device(adapter->vlgrp, i, v_netdev); - } - } - -tso_out: - -#endif /* HAVE_NETDEV_VLAN_FEATURES */ - return 0; -} - -#endif /* NETIF_F_TSO */ -#ifdef ETHTOOL_GFLAGS -static int igb_set_flags(struct net_device *netdev, u32 data) -{ - u32 supported_flags = ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN | - ETH_FLAG_RXHASH; -#ifndef HAVE_VLAN_RX_REGISTER - u32 changed = netdev->features ^ data; -#endif - int rc; -#ifndef IGB_NO_LRO - - supported_flags |= ETH_FLAG_LRO; -#endif - /* - * Since there is no support for separate tx vlan accel - * enabled make sure tx flag is cleared if rx is. - */ - if (!(data & ETH_FLAG_RXVLAN)) - data &= ~ETH_FLAG_TXVLAN; - - rc = ethtool_op_set_flags(netdev, data, supported_flags); - if (rc) - return rc; -#ifndef HAVE_VLAN_RX_REGISTER - - if (changed & ETH_FLAG_RXVLAN) - igb_vlan_mode(netdev, data); -#endif - - return 0; -} - -#endif /* ETHTOOL_GFLAGS */ -#endif /* HAVE_NDO_SET_FEATURES */ -#ifdef ETHTOOL_SADV_COAL -static int igb_set_adv_coal(struct net_device *netdev, struct ethtool_value *edata) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - switch (edata->data) { - case IGB_DMAC_DISABLE: - adapter->dmac = edata->data; - break; - case IGB_DMAC_MIN: - adapter->dmac = edata->data; - break; - case IGB_DMAC_500: - adapter->dmac = edata->data; - break; - case IGB_DMAC_EN_DEFAULT: - adapter->dmac = edata->data; - break; - case IGB_DMAC_2000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_3000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_4000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_5000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_6000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_7000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_8000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_9000: - adapter->dmac = edata->data; - break; - case IGB_DMAC_MAX: - adapter->dmac = edata->data; - break; - default: - adapter->dmac = IGB_DMAC_DISABLE; - printk("set_dmac: invalid setting, setting DMAC to %d\n", - adapter->dmac); - } - printk("%s: setting DMAC to %d\n", netdev->name, adapter->dmac); - return 0; -} -#endif /* ETHTOOL_SADV_COAL */ -#ifdef ETHTOOL_GADV_COAL -static void igb_get_dmac(struct net_device *netdev, - struct ethtool_value *edata) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - edata->data = adapter->dmac; - - return; -} -#endif - -#ifdef ETHTOOL_GEEE -static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ret_val; - u16 phy_data; - - if ((hw->mac.type < e1000_i350) || - (hw->phy.media_type != e1000_media_type_copper)) - return -EOPNOTSUPP; - - edata->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_100baseT_Full); - - if (!hw->dev_spec._82575.eee_disable) - edata->advertised = - mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert); - - /* The IPCNFG and EEER registers are not supported on I354. */ - if (hw->mac.type == e1000_i354) { - e1000_get_eee_status_i354(hw, (bool *)&edata->eee_active); - } else { - u32 eeer; - - eeer = E1000_READ_REG(hw, E1000_EEER); - - /* EEE status on negotiated link */ - if (eeer & E1000_EEER_EEE_NEG) - edata->eee_active = true; - - if (eeer & E1000_EEER_TX_LPI_EN) - edata->tx_lpi_enabled = true; - } - - /* EEE Link Partner Advertised */ - switch (hw->mac.type) { - case e1000_i350: - ret_val = e1000_read_emi_reg(hw, E1000_EEE_LP_ADV_ADDR_I350, - &phy_data); - if (ret_val) - return -ENODATA; - - edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); - - break; - case e1000_i354: - case e1000_i210: - case e1000_i211: - ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210, - E1000_EEE_LP_ADV_DEV_I210, - &phy_data); - if (ret_val) - return -ENODATA; - - edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); - - break; - default: - break; - } - - edata->eee_enabled = !hw->dev_spec._82575.eee_disable; - - if ((hw->mac.type == e1000_i354) && - (edata->eee_enabled)) - edata->tx_lpi_enabled = true; - - /* - * report correct negotiated EEE status for devices that - * wrongly report EEE at half-duplex - */ - if (adapter->link_duplex == HALF_DUPLEX) { - edata->eee_enabled = false; - edata->eee_active = false; - edata->tx_lpi_enabled = false; - edata->advertised &= ~edata->advertised; - } - - return 0; -} -#endif - -#ifdef ETHTOOL_SEEE -static int igb_set_eee(struct net_device *netdev, - struct ethtool_eee *edata) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct ethtool_eee eee_curr; - s32 ret_val; - - if ((hw->mac.type < e1000_i350) || - (hw->phy.media_type != e1000_media_type_copper)) - return -EOPNOTSUPP; - - ret_val = igb_get_eee(netdev, &eee_curr); - if (ret_val) - return ret_val; - - if (eee_curr.eee_enabled) { - if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { - dev_err(pci_dev_to_dev(adapter->pdev), - "Setting EEE tx-lpi is not supported\n"); - return -EINVAL; - } - - /* Tx LPI time is not implemented currently */ - if (edata->tx_lpi_timer) { - dev_err(pci_dev_to_dev(adapter->pdev), - "Setting EEE Tx LPI timer is not supported\n"); - return -EINVAL; - } - - if (edata->advertised & - ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) { - dev_err(pci_dev_to_dev(adapter->pdev), - "EEE Advertisement supports only 100Tx and or 100T full duplex\n"); - return -EINVAL; - } - - } else if (!edata->eee_enabled) { - dev_err(pci_dev_to_dev(adapter->pdev), - "Setting EEE options is not supported with EEE disabled\n"); - return -EINVAL; - } - - adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised); - - if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) { - hw->dev_spec._82575.eee_disable = !edata->eee_enabled; - - /* reset link */ - if (netif_running(netdev)) - igb_reinit_locked(adapter); - else - igb_reset(adapter); - } - - return 0; -} -#endif /* ETHTOOL_SEEE */ - -#ifdef ETHTOOL_GRXRINGS -static int igb_get_rss_hash_opts(struct igb_adapter *adapter, - struct ethtool_rxnfc *cmd) -{ - cmd->data = 0; - - /* Report default options for RSS on igb */ - switch (cmd->flow_type) { - case TCP_V4_FLOW: - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case UDP_V4_FLOW: - if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case SCTP_V4_FLOW: - case AH_ESP_V4_FLOW: - case AH_V4_FLOW: - case ESP_V4_FLOW: - case IPV4_FLOW: - cmd->data |= RXH_IP_SRC | RXH_IP_DST; - break; - case TCP_V6_FLOW: - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case UDP_V6_FLOW: - if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case SCTP_V6_FLOW: - case AH_ESP_V6_FLOW: - case AH_V6_FLOW: - case ESP_V6_FLOW: - case IPV6_FLOW: - cmd->data |= RXH_IP_SRC | RXH_IP_DST; - break; - default: - return -EINVAL; - } - - return 0; -} - -static int igb_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, -#ifdef HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS - void *rule_locs) -#else - u32 *rule_locs) -#endif -{ - struct igb_adapter *adapter = netdev_priv(dev); - int ret = -EOPNOTSUPP; - - switch (cmd->cmd) { - case ETHTOOL_GRXRINGS: - cmd->data = adapter->num_rx_queues; - ret = 0; - break; - case ETHTOOL_GRXFH: - ret = igb_get_rss_hash_opts(adapter, cmd); - break; - default: - break; - } - - return ret; -} - -#define UDP_RSS_FLAGS (IGB_FLAG_RSS_FIELD_IPV4_UDP | \ - IGB_FLAG_RSS_FIELD_IPV6_UDP) -static int igb_set_rss_hash_opt(struct igb_adapter *adapter, - struct ethtool_rxnfc *nfc) -{ - u32 flags = adapter->flags; - - /* - * RSS does not support anything other than hashing - * to queues on src and dst IPs and ports - */ - if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST | - RXH_L4_B_0_1 | RXH_L4_B_2_3)) - return -EINVAL; - - switch (nfc->flow_type) { - case TCP_V4_FLOW: - case TCP_V6_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST) || - !(nfc->data & RXH_L4_B_0_1) || - !(nfc->data & RXH_L4_B_2_3)) - return -EINVAL; - break; - case UDP_V4_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST)) - return -EINVAL; - switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { - case 0: - flags &= ~IGB_FLAG_RSS_FIELD_IPV4_UDP; - break; - case (RXH_L4_B_0_1 | RXH_L4_B_2_3): - flags |= IGB_FLAG_RSS_FIELD_IPV4_UDP; - break; - default: - return -EINVAL; - } - break; - case UDP_V6_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST)) - return -EINVAL; - switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { - case 0: - flags &= ~IGB_FLAG_RSS_FIELD_IPV6_UDP; - break; - case (RXH_L4_B_0_1 | RXH_L4_B_2_3): - flags |= IGB_FLAG_RSS_FIELD_IPV6_UDP; - break; - default: - return -EINVAL; - } - break; - case AH_ESP_V4_FLOW: - case AH_V4_FLOW: - case ESP_V4_FLOW: - case SCTP_V4_FLOW: - case AH_ESP_V6_FLOW: - case AH_V6_FLOW: - case ESP_V6_FLOW: - case SCTP_V6_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST) || - (nfc->data & RXH_L4_B_0_1) || - (nfc->data & RXH_L4_B_2_3)) - return -EINVAL; - break; - default: - return -EINVAL; - } - - /* if we changed something we need to update flags */ - if (flags != adapter->flags) { - struct e1000_hw *hw = &adapter->hw; - u32 mrqc = E1000_READ_REG(hw, E1000_MRQC); - - if ((flags & UDP_RSS_FLAGS) && - !(adapter->flags & UDP_RSS_FLAGS)) - DPRINTK(DRV, WARNING, - "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n"); - - adapter->flags = flags; - - /* Perform hash on these packet types */ - mrqc |= E1000_MRQC_RSS_FIELD_IPV4 | - E1000_MRQC_RSS_FIELD_IPV4_TCP | - E1000_MRQC_RSS_FIELD_IPV6 | - E1000_MRQC_RSS_FIELD_IPV6_TCP; - - mrqc &= ~(E1000_MRQC_RSS_FIELD_IPV4_UDP | - E1000_MRQC_RSS_FIELD_IPV6_UDP); - - if (flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) - mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP; - - if (flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) - mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP; - - E1000_WRITE_REG(hw, E1000_MRQC, mrqc); - } - - return 0; -} - -static int igb_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) -{ - struct igb_adapter *adapter = netdev_priv(dev); - int ret = -EOPNOTSUPP; - - switch (cmd->cmd) { - case ETHTOOL_SRXFH: - ret = igb_set_rss_hash_opt(adapter, cmd); - break; - default: - break; - } - - return ret; -} -#endif /* ETHTOOL_GRXRINGS */ - -static const struct ethtool_ops igb_ethtool_ops = { -#ifndef ETHTOOL_GLINKSETTINGS - .get_settings = igb_get_settings, -#endif -#ifndef ETHTOOL_SLINKSETTINGS - .set_settings = igb_set_settings, -#endif - .get_drvinfo = igb_get_drvinfo, - .get_regs_len = igb_get_regs_len, - .get_regs = igb_get_regs, - .get_wol = igb_get_wol, - .set_wol = igb_set_wol, - .get_msglevel = igb_get_msglevel, - .set_msglevel = igb_set_msglevel, - .nway_reset = igb_nway_reset, - .get_link = igb_get_link, - .get_eeprom_len = igb_get_eeprom_len, - .get_eeprom = igb_get_eeprom, - .set_eeprom = igb_set_eeprom, - .get_ringparam = igb_get_ringparam, - .set_ringparam = igb_set_ringparam, - .get_pauseparam = igb_get_pauseparam, - .set_pauseparam = igb_set_pauseparam, - .self_test = igb_diag_test, - .get_strings = igb_get_strings, -#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT -#ifdef HAVE_ETHTOOL_SET_PHYS_ID - .set_phys_id = igb_set_phys_id, -#else - .phys_id = igb_phys_id, -#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ -#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ -#ifdef HAVE_ETHTOOL_GET_SSET_COUNT - .get_sset_count = igb_get_sset_count, -#else - .get_stats_count = igb_get_stats_count, - .self_test_count = igb_diag_test_count, -#endif - .get_ethtool_stats = igb_get_ethtool_stats, -#ifdef HAVE_ETHTOOL_GET_PERM_ADDR - .get_perm_addr = ethtool_op_get_perm_addr, -#endif - .get_coalesce = igb_get_coalesce, - .set_coalesce = igb_set_coalesce, -#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT -#ifdef HAVE_ETHTOOL_GET_TS_INFO - .get_ts_info = igb_get_ts_info, -#endif /* HAVE_ETHTOOL_GET_TS_INFO */ -#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ -#ifdef CONFIG_PM_RUNTIME - .begin = igb_ethtool_begin, - .complete = igb_ethtool_complete, -#endif /* CONFIG_PM_RUNTIME */ -#ifndef HAVE_NDO_SET_FEATURES - .get_rx_csum = igb_get_rx_csum, - .set_rx_csum = igb_set_rx_csum, - .get_tx_csum = ethtool_op_get_tx_csum, - .set_tx_csum = igb_set_tx_csum, - .get_sg = ethtool_op_get_sg, - .set_sg = ethtool_op_set_sg, -#ifdef NETIF_F_TSO - .get_tso = ethtool_op_get_tso, - .set_tso = igb_set_tso, -#endif -#ifdef ETHTOOL_GFLAGS - .get_flags = ethtool_op_get_flags, - .set_flags = igb_set_flags, -#endif /* ETHTOOL_GFLAGS */ -#endif /* HAVE_NDO_SET_FEATURES */ -#ifdef ETHTOOL_GADV_COAL - .get_advcoal = igb_get_adv_coal, - .set_advcoal = igb_set_dmac_coal, -#endif /* ETHTOOL_GADV_COAL */ -#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT -#ifdef ETHTOOL_GEEE - .get_eee = igb_get_eee, -#endif -#ifdef ETHTOOL_SEEE - .set_eee = igb_set_eee, -#endif -#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ -#ifdef ETHTOOL_GRXRINGS - .get_rxnfc = igb_get_rxnfc, - .set_rxnfc = igb_set_rxnfc, -#endif -}; - -#ifdef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT -static const struct ethtool_ops_ext igb_ethtool_ops_ext = { - .size = sizeof(struct ethtool_ops_ext), - .get_ts_info = igb_get_ts_info, - .set_phys_id = igb_set_phys_id, - .get_eee = igb_get_eee, - .set_eee = igb_set_eee, -}; - -void igb_set_ethtool_ops(struct net_device *netdev) -{ - SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops); - set_ethtool_ops_ext(netdev, &igb_ethtool_ops_ext); -} -#else -void igb_set_ethtool_ops(struct net_device *netdev) -{ - /* have to "undeclare" const on this struct to remove warnings */ - SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&igb_ethtool_ops); -} -#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ -#endif /* SIOCETHTOOL */ diff --git a/kernel/linux/kni/ethtool/igb/igb_main.c b/kernel/linux/kni/ethtool/igb/igb_main.c deleted file mode 100644 index cda2b063d8..0000000000 --- a/kernel/linux/kni/ethtool/igb/igb_main.c +++ /dev/null @@ -1,10355 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#ifdef NETIF_F_TSO -#include -#ifdef NETIF_F_TSO6 -#include -#include -#endif -#endif -#ifdef SIOCGMIIPHY -#include -#endif -#ifdef SIOCETHTOOL -#include -#endif -#include -#ifdef CONFIG_PM_RUNTIME -#include -#endif /* CONFIG_PM_RUNTIME */ - -#include -#include "igb.h" -#include "igb_vmdq.h" - -#include - -#if defined(DEBUG) || defined (DEBUG_DUMP) || defined (DEBUG_ICR) || defined(DEBUG_ITR) -#define DRV_DEBUG "_debug" -#else -#define DRV_DEBUG -#endif -#define DRV_HW_PERF -#define VERSION_SUFFIX - -#define MAJ 5 -#define MIN 0 -#define BUILD 6 -#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." __stringify(BUILD) VERSION_SUFFIX DRV_DEBUG DRV_HW_PERF - -char igb_driver_name[] = "igb"; -char igb_driver_version[] = DRV_VERSION; -static const char igb_driver_string[] = - "Intel(R) Gigabit Ethernet Network Driver"; -static const char igb_copyright[] = - "Copyright (c) 2007-2013 Intel Corporation."; - -const struct pci_device_id igb_pci_tbl[] = { - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER) }, - /* required last entry */ - {0, } -}; - -//MODULE_DEVICE_TABLE(pci, igb_pci_tbl); -static void igb_set_sriov_capability(struct igb_adapter *adapter) __attribute__((__unused__)); -void igb_reset(struct igb_adapter *); -static int igb_setup_all_tx_resources(struct igb_adapter *); -static int igb_setup_all_rx_resources(struct igb_adapter *); -static void igb_free_all_tx_resources(struct igb_adapter *); -static void igb_free_all_rx_resources(struct igb_adapter *); -static void igb_setup_mrqc(struct igb_adapter *); -void igb_update_stats(struct igb_adapter *); -static int igb_probe(struct pci_dev *, const struct pci_device_id *); -static void __devexit igb_remove(struct pci_dev *pdev); -static int igb_sw_init(struct igb_adapter *); -static int igb_open(struct net_device *); -static int igb_close(struct net_device *); -static void igb_configure(struct igb_adapter *); -static void igb_configure_tx(struct igb_adapter *); -static void igb_configure_rx(struct igb_adapter *); -static void igb_clean_all_tx_rings(struct igb_adapter *); -static void igb_clean_all_rx_rings(struct igb_adapter *); -static void igb_clean_tx_ring(struct igb_ring *); -static void igb_set_rx_mode(struct net_device *); -#ifdef HAVE_TIMER_SETUP -static void igb_update_phy_info(struct timer_list *); -static void igb_watchdog(struct timer_list *); -#else -static void igb_update_phy_info(unsigned long); -static void igb_watchdog(unsigned long); -#endif -static void igb_watchdog_task(struct work_struct *); -static void igb_dma_err_task(struct work_struct *); -#ifdef HAVE_TIMER_SETUP -static void igb_dma_err_timer(struct timer_list *); -#else -static void igb_dma_err_timer(unsigned long data); -#endif -static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *); -static struct net_device_stats *igb_get_stats(struct net_device *); -static int igb_change_mtu(struct net_device *, int); -void igb_full_sync_mac_table(struct igb_adapter *adapter); -static int igb_set_mac(struct net_device *, void *); -static void igb_set_uta(struct igb_adapter *adapter); -static irqreturn_t igb_intr(int irq, void *); -static irqreturn_t igb_intr_msi(int irq, void *); -static irqreturn_t igb_msix_other(int irq, void *); -static irqreturn_t igb_msix_ring(int irq, void *); -#ifdef IGB_DCA -static void igb_update_dca(struct igb_q_vector *); -static void igb_setup_dca(struct igb_adapter *); -#endif /* IGB_DCA */ -static int igb_poll(struct napi_struct *, int); -static bool igb_clean_tx_irq(struct igb_q_vector *); -static bool igb_clean_rx_irq(struct igb_q_vector *, int); -static int igb_ioctl(struct net_device *, struct ifreq *, int cmd); -static void igb_tx_timeout(struct net_device *); -static void igb_reset_task(struct work_struct *); -#ifdef HAVE_VLAN_RX_REGISTER -static void igb_vlan_mode(struct net_device *, struct vlan_group *); -#endif -#ifdef HAVE_VLAN_PROTOCOL -static int igb_vlan_rx_add_vid(struct net_device *, - __be16 proto, u16); -static int igb_vlan_rx_kill_vid(struct net_device *, - __be16 proto, u16); -#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef NETIF_F_HW_VLAN_CTAG_RX -static int igb_vlan_rx_add_vid(struct net_device *, - __always_unused __be16 proto, u16); -static int igb_vlan_rx_kill_vid(struct net_device *, - __always_unused __be16 proto, u16); -#else -static int igb_vlan_rx_add_vid(struct net_device *, u16); -static int igb_vlan_rx_kill_vid(struct net_device *, u16); -#endif -#else -static void igb_vlan_rx_add_vid(struct net_device *, u16); -static void igb_vlan_rx_kill_vid(struct net_device *, u16); -#endif -static void igb_restore_vlan(struct igb_adapter *); -void igb_rar_set(struct igb_adapter *adapter, u32 index); -static void igb_ping_all_vfs(struct igb_adapter *); -static void igb_msg_task(struct igb_adapter *); -static void igb_vmm_control(struct igb_adapter *); -static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *); -static void igb_restore_vf_multicasts(struct igb_adapter *adapter); -static void igb_process_mdd_event(struct igb_adapter *); -#ifdef IFLA_VF_MAX -static int igb_ndo_set_vf_mac( struct net_device *netdev, int vf, u8 *mac); -static int igb_ndo_set_vf_vlan(struct net_device *netdev, -#ifdef HAVE_VF_VLAN_PROTO - int vf, u16 vlan, u8 qos, __be16 vlan_proto); -#else - int vf, u16 vlan, u8 qos); -#endif -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE -static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, - bool setting); -#endif -#ifdef HAVE_VF_MIN_MAX_TXRATE -static int igb_ndo_set_vf_bw(struct net_device *, int, int, int); -#else /* HAVE_VF_MIN_MAX_TXRATE */ -static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate); -#endif /* HAVE_VF_MIN_MAX_TXRATE */ -static int igb_ndo_get_vf_config(struct net_device *netdev, int vf, - struct ifla_vf_info *ivi); -static void igb_check_vf_rate_limit(struct igb_adapter *); -#endif -static int igb_vf_configure(struct igb_adapter *adapter, int vf); -#ifdef CONFIG_PM -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_suspend(struct device *dev); -static int igb_resume(struct device *dev); -#ifdef CONFIG_PM_RUNTIME -static int igb_runtime_suspend(struct device *dev); -static int igb_runtime_resume(struct device *dev); -static int igb_runtime_idle(struct device *dev); -#endif /* CONFIG_PM_RUNTIME */ -static const struct dev_pm_ops igb_pm_ops = { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) - .suspend = igb_suspend, - .resume = igb_resume, - .freeze = igb_suspend, - .thaw = igb_resume, - .poweroff = igb_suspend, - .restore = igb_resume, -#ifdef CONFIG_PM_RUNTIME - .runtime_suspend = igb_runtime_suspend, - .runtime_resume = igb_runtime_resume, - .runtime_idle = igb_runtime_idle, -#endif -#else /* Linux >= 2.6.34 */ - SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume) -#ifdef CONFIG_PM_RUNTIME - SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume, - igb_runtime_idle) -#endif /* CONFIG_PM_RUNTIME */ -#endif /* Linux version */ -}; -#else -static int igb_suspend(struct pci_dev *pdev, pm_message_t state); -static int igb_resume(struct pci_dev *pdev); -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -#endif /* CONFIG_PM */ -#ifndef USE_REBOOT_NOTIFIER -static void igb_shutdown(struct pci_dev *); -#else -static int igb_notify_reboot(struct notifier_block *, unsigned long, void *); -static struct notifier_block igb_notifier_reboot = { - .notifier_call = igb_notify_reboot, - .next = NULL, - .priority = 0 -}; -#endif -#ifdef IGB_DCA -static int igb_notify_dca(struct notifier_block *, unsigned long, void *); -static struct notifier_block dca_notifier = { - .notifier_call = igb_notify_dca, - .next = NULL, - .priority = 0 -}; -#endif -#ifdef CONFIG_NET_POLL_CONTROLLER -/* for netdump / net console */ -static void igb_netpoll(struct net_device *); -#endif - -#ifdef HAVE_PCI_ERS -static pci_ers_result_t igb_io_error_detected(struct pci_dev *, - pci_channel_state_t); -static pci_ers_result_t igb_io_slot_reset(struct pci_dev *); -static void igb_io_resume(struct pci_dev *); - -static struct pci_error_handlers igb_err_handler = { - .error_detected = igb_io_error_detected, - .slot_reset = igb_io_slot_reset, - .resume = igb_io_resume, -}; -#endif - -static void igb_init_fw(struct igb_adapter *adapter); -static void igb_init_dmac(struct igb_adapter *adapter, u32 pba); - -static struct pci_driver igb_driver = { - .name = igb_driver_name, - .id_table = igb_pci_tbl, - .probe = igb_probe, - .remove = __devexit_p(igb_remove), -#ifdef CONFIG_PM -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS - .driver.pm = &igb_pm_ops, -#else - .suspend = igb_suspend, - .resume = igb_resume, -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -#endif /* CONFIG_PM */ -#ifndef USE_REBOOT_NOTIFIER - .shutdown = igb_shutdown, -#endif -#ifdef HAVE_PCI_ERS - .err_handler = &igb_err_handler -#endif -}; - -//MODULE_AUTHOR("Intel Corporation, "); -//MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver"); -//MODULE_LICENSE("GPL"); -//MODULE_VERSION(DRV_VERSION); - -static void igb_vfta_set(struct igb_adapter *adapter, u32 vid, bool add) -{ - struct e1000_hw *hw = &adapter->hw; - struct e1000_host_mng_dhcp_cookie *mng_cookie = &hw->mng_cookie; - u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK; - u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK); - u32 vfta; - - /* - * if this is the management vlan the only option is to add it in so - * that the management pass through will continue to work - */ - if ((mng_cookie->status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && - (vid == mng_cookie->vlan_id)) - add = TRUE; - - vfta = adapter->shadow_vfta[index]; - - if (add) - vfta |= mask; - else - vfta &= ~mask; - - e1000_write_vfta(hw, index, vfta); - adapter->shadow_vfta[index] = vfta; -} - -static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE; -//module_param(debug, int, 0); -//MODULE_PARM_DESC(debug, "Debug level (0=none, ..., 16=all)"); - -/** - * igb_init_module - Driver Registration Routine - * - * igb_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. - **/ -static int __init igb_init_module(void) -{ - int ret; - - printk(KERN_INFO "%s - version %s\n", - igb_driver_string, igb_driver_version); - - printk(KERN_INFO "%s\n", igb_copyright); -#ifdef IGB_HWMON -/* only use IGB_PROCFS if IGB_HWMON is not defined */ -#else -#ifdef IGB_PROCFS - if (igb_procfs_topdir_init()) - printk(KERN_INFO "Procfs failed to initialize topdir\n"); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - -#ifdef IGB_DCA - dca_register_notify(&dca_notifier); -#endif - ret = pci_register_driver(&igb_driver); -#ifdef USE_REBOOT_NOTIFIER - if (ret >= 0) { - register_reboot_notifier(&igb_notifier_reboot); - } -#endif - return ret; -} - -#undef module_init -#define module_init(x) static int x(void) __attribute__((__unused__)); -module_init(igb_init_module); - -/** - * igb_exit_module - Driver Exit Cleanup Routine - * - * igb_exit_module is called just before the driver is removed - * from memory. - **/ -static void __exit igb_exit_module(void) -{ -#ifdef IGB_DCA - dca_unregister_notify(&dca_notifier); -#endif -#ifdef USE_REBOOT_NOTIFIER - unregister_reboot_notifier(&igb_notifier_reboot); -#endif - pci_unregister_driver(&igb_driver); - -#ifdef IGB_HWMON -/* only compile IGB_PROCFS if IGB_HWMON is not defined */ -#else -#ifdef IGB_PROCFS - igb_procfs_topdir_exit(); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ -} - -#undef module_exit -#define module_exit(x) static void x(void) __attribute__((__unused__)); -module_exit(igb_exit_module); - -#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1)) -/** - * igb_cache_ring_register - Descriptor ring to register mapping - * @adapter: board private structure to initialize - * - * Once we know the feature-set enabled for the device, we'll cache - * the register offset the descriptor ring is assigned to. - **/ -static void igb_cache_ring_register(struct igb_adapter *adapter) -{ - int i = 0, j = 0; - u32 rbase_offset = adapter->vfs_allocated_count; - - switch (adapter->hw.mac.type) { - case e1000_82576: - /* The queues are allocated for virtualization such that VF 0 - * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc. - * In order to avoid collision we start at the first free queue - * and continue consuming queues in the same sequence - */ - if ((adapter->rss_queues > 1) && adapter->vmdq_pools) { - for (; i < adapter->rss_queues; i++) - adapter->rx_ring[i]->reg_idx = rbase_offset + - Q_IDX_82576(i); - } - case e1000_82575: - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - default: - for (; i < adapter->num_rx_queues; i++) - adapter->rx_ring[i]->reg_idx = rbase_offset + i; - for (; j < adapter->num_tx_queues; j++) - adapter->tx_ring[j]->reg_idx = rbase_offset + j; - break; - } -} - -static void igb_configure_lli(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 port; - - /* LLI should only be enabled for MSI-X or MSI interrupts */ - if (!adapter->msix_entries && !(adapter->flags & IGB_FLAG_HAS_MSI)) - return; - - if (adapter->lli_port) { - /* use filter 0 for port */ - port = htons((u16)adapter->lli_port); - E1000_WRITE_REG(hw, E1000_IMIR(0), - (port | E1000_IMIR_PORT_IM_EN)); - E1000_WRITE_REG(hw, E1000_IMIREXT(0), - (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP)); - } - - if (adapter->flags & IGB_FLAG_LLI_PUSH) { - /* use filter 1 for push flag */ - E1000_WRITE_REG(hw, E1000_IMIR(1), - (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); - E1000_WRITE_REG(hw, E1000_IMIREXT(1), - (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_PSH)); - } - - if (adapter->lli_size) { - /* use filter 2 for size */ - E1000_WRITE_REG(hw, E1000_IMIR(2), - (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); - E1000_WRITE_REG(hw, E1000_IMIREXT(2), - (adapter->lli_size | E1000_IMIREXT_CTRL_BP)); - } - -} - -/** - * igb_write_ivar - configure ivar for given MSI-X vector - * @hw: pointer to the HW structure - * @msix_vector: vector number we are allocating to a given ring - * @index: row index of IVAR register to write within IVAR table - * @offset: column offset of in IVAR, should be multiple of 8 - * - * This function is intended to handle the writing of the IVAR register - * for adapters 82576 and newer. The IVAR table consists of 2 columns, - * each containing an cause allocation for an Rx and Tx ring, and a - * variable number of rows depending on the number of queues supported. - **/ -static void igb_write_ivar(struct e1000_hw *hw, int msix_vector, - int index, int offset) -{ - u32 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); - - /* clear any bits that are currently set */ - ivar &= ~((u32)0xFF << offset); - - /* write vector and valid bit */ - ivar |= (msix_vector | E1000_IVAR_VALID) << offset; - - E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); -} - -#define IGB_N0_QUEUE -1 -static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - struct e1000_hw *hw = &adapter->hw; - int rx_queue = IGB_N0_QUEUE; - int tx_queue = IGB_N0_QUEUE; - u32 msixbm = 0; - - if (q_vector->rx.ring) - rx_queue = q_vector->rx.ring->reg_idx; - if (q_vector->tx.ring) - tx_queue = q_vector->tx.ring->reg_idx; - - switch (hw->mac.type) { - case e1000_82575: - /* The 82575 assigns vectors using a bitmask, which matches the - bitmask for the EICR/EIMS/EIMC registers. To assign one - or more queues to a vector, we write the appropriate bits - into the MSIXBM register for that vector. */ - if (rx_queue > IGB_N0_QUEUE) - msixbm = E1000_EICR_RX_QUEUE0 << rx_queue; - if (tx_queue > IGB_N0_QUEUE) - msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue; - if (!adapter->msix_entries && msix_vector == 0) - msixbm |= E1000_EIMS_OTHER; - E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), msix_vector, msixbm); - q_vector->eims_value = msixbm; - break; - case e1000_82576: - /* - * 82576 uses a table that essentially consists of 2 columns - * with 8 rows. The ordering is column-major so we use the - * lower 3 bits as the row index, and the 4th bit as the - * column offset. - */ - if (rx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - rx_queue & 0x7, - (rx_queue & 0x8) << 1); - if (tx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - tx_queue & 0x7, - ((tx_queue & 0x8) << 1) + 8); - q_vector->eims_value = 1 << msix_vector; - break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - /* - * On 82580 and newer adapters the scheme is similar to 82576 - * however instead of ordering column-major we have things - * ordered row-major. So we traverse the table by using - * bit 0 as the column offset, and the remaining bits as the - * row index. - */ - if (rx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - rx_queue >> 1, - (rx_queue & 0x1) << 4); - if (tx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - tx_queue >> 1, - ((tx_queue & 0x1) << 4) + 8); - q_vector->eims_value = 1 << msix_vector; - break; - default: - BUG(); - break; - } - - /* add q_vector eims value to global eims_enable_mask */ - adapter->eims_enable_mask |= q_vector->eims_value; - - /* configure q_vector to set itr on first interrupt */ - q_vector->set_itr = 1; -} - -/** - * igb_configure_msix - Configure MSI-X hardware - * - * igb_configure_msix sets up the hardware to properly - * generate MSI-X interrupts. - **/ -static void igb_configure_msix(struct igb_adapter *adapter) -{ - u32 tmp; - int i, vector = 0; - struct e1000_hw *hw = &adapter->hw; - - adapter->eims_enable_mask = 0; - - /* set vector for other causes, i.e. link changes */ - switch (hw->mac.type) { - case e1000_82575: - tmp = E1000_READ_REG(hw, E1000_CTRL_EXT); - /* enable MSI-X PBA support*/ - tmp |= E1000_CTRL_EXT_PBA_CLR; - - /* Auto-Mask interrupts upon ICR read. */ - tmp |= E1000_CTRL_EXT_EIAME; - tmp |= E1000_CTRL_EXT_IRCA; - - E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmp); - - /* enable msix_other interrupt */ - E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), vector++, - E1000_EIMS_OTHER); - adapter->eims_other = E1000_EIMS_OTHER; - - break; - - case e1000_82576: - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - /* Turn on MSI-X capability first, or our settings - * won't stick. And it will take days to debug. */ - E1000_WRITE_REG(hw, E1000_GPIE, E1000_GPIE_MSIX_MODE | - E1000_GPIE_PBA | E1000_GPIE_EIAME | - E1000_GPIE_NSICR); - - /* enable msix_other interrupt */ - adapter->eims_other = 1 << vector; - tmp = (vector++ | E1000_IVAR_VALID) << 8; - - E1000_WRITE_REG(hw, E1000_IVAR_MISC, tmp); - break; - default: - /* do nothing, since nothing else supports MSI-X */ - break; - } /* switch (hw->mac.type) */ - - adapter->eims_enable_mask |= adapter->eims_other; - - for (i = 0; i < adapter->num_q_vectors; i++) - igb_assign_vector(adapter->q_vector[i], vector++); - - E1000_WRITE_FLUSH(hw); -} - -/** - * igb_request_msix - Initialize MSI-X interrupts - * - * igb_request_msix allocates MSI-X vectors and requests interrupts from the - * kernel. - **/ -static int igb_request_msix(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; - int i, err = 0, vector = 0, free_vector = 0; - - err = request_irq(adapter->msix_entries[vector].vector, - &igb_msix_other, 0, netdev->name, adapter); - if (err) - goto err_out; - - for (i = 0; i < adapter->num_q_vectors; i++) { - struct igb_q_vector *q_vector = adapter->q_vector[i]; - - vector++; - - q_vector->itr_register = hw->hw_addr + E1000_EITR(vector); - - if (q_vector->rx.ring && q_vector->tx.ring) - sprintf(q_vector->name, "%s-TxRx-%u", netdev->name, - q_vector->rx.ring->queue_index); - else if (q_vector->tx.ring) - sprintf(q_vector->name, "%s-tx-%u", netdev->name, - q_vector->tx.ring->queue_index); - else if (q_vector->rx.ring) - sprintf(q_vector->name, "%s-rx-%u", netdev->name, - q_vector->rx.ring->queue_index); - else - sprintf(q_vector->name, "%s-unused", netdev->name); - - err = request_irq(adapter->msix_entries[vector].vector, - igb_msix_ring, 0, q_vector->name, - q_vector); - if (err) - goto err_free; - } - - igb_configure_msix(adapter); - return 0; - -err_free: - /* free already assigned IRQs */ - free_irq(adapter->msix_entries[free_vector++].vector, adapter); - - vector--; - for (i = 0; i < vector; i++) { - free_irq(adapter->msix_entries[free_vector++].vector, - adapter->q_vector[i]); - } -err_out: - return err; -} - -static void igb_reset_interrupt_capability(struct igb_adapter *adapter) -{ - if (adapter->msix_entries) { - pci_disable_msix(adapter->pdev); - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; - } else if (adapter->flags & IGB_FLAG_HAS_MSI) { - pci_disable_msi(adapter->pdev); - } -} - -/** - * igb_free_q_vector - Free memory allocated for specific interrupt vector - * @adapter: board private structure to initialize - * @v_idx: Index of vector to be freed - * - * This function frees the memory allocated to the q_vector. In addition if - * NAPI is enabled it will delete any references to the NAPI struct prior - * to freeing the q_vector. - **/ -static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) -{ - struct igb_q_vector *q_vector = adapter->q_vector[v_idx]; - - if (q_vector->tx.ring) - adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; - - if (q_vector->rx.ring) - adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL; - - adapter->q_vector[v_idx] = NULL; - netif_napi_del(&q_vector->napi); -#ifndef IGB_NO_LRO - __skb_queue_purge(&q_vector->lrolist.active); -#endif - kfree(q_vector); -} - -/** - * igb_free_q_vectors - Free memory allocated for interrupt vectors - * @adapter: board private structure to initialize - * - * This function frees the memory allocated to the q_vectors. In addition if - * NAPI is enabled it will delete any references to the NAPI struct prior - * to freeing the q_vector. - **/ -static void igb_free_q_vectors(struct igb_adapter *adapter) -{ - int v_idx = adapter->num_q_vectors; - - adapter->num_tx_queues = 0; - adapter->num_rx_queues = 0; - adapter->num_q_vectors = 0; - - while (v_idx--) - igb_free_q_vector(adapter, v_idx); -} - -/** - * igb_clear_interrupt_scheme - reset the device to a state of no interrupts - * - * This function resets the device so that it has 0 rx queues, tx queues, and - * MSI-X interrupts allocated. - */ -static void igb_clear_interrupt_scheme(struct igb_adapter *adapter) -{ - igb_free_q_vectors(adapter); - igb_reset_interrupt_capability(adapter); -} - -/** - * igb_process_mdd_event - * @adapter - board private structure - * - * Identify a malicious VF, disable the VF TX/RX queues and log a message. - */ -static void igb_process_mdd_event(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 lvmmc, vfte, vfre, mdfb; - u8 vf_queue; - - lvmmc = E1000_READ_REG(hw, E1000_LVMMC); - vf_queue = lvmmc >> 29; - - /* VF index cannot be bigger or equal to VFs allocated */ - if (vf_queue >= adapter->vfs_allocated_count) - return; - - netdev_info(adapter->netdev, - "VF %d misbehaved. VF queues are disabled. " - "VM misbehavior code is 0x%x\n", vf_queue, lvmmc); - - /* Disable VFTE and VFRE related bits */ - vfte = E1000_READ_REG(hw, E1000_VFTE); - vfte &= ~(1 << vf_queue); - E1000_WRITE_REG(hw, E1000_VFTE, vfte); - - vfre = E1000_READ_REG(hw, E1000_VFRE); - vfre &= ~(1 << vf_queue); - E1000_WRITE_REG(hw, E1000_VFRE, vfre); - - /* Disable MDFB related bit. Clear on write */ - mdfb = E1000_READ_REG(hw, E1000_MDFB); - mdfb |= (1 << vf_queue); - E1000_WRITE_REG(hw, E1000_MDFB, mdfb); - - /* Reset the specific VF */ - E1000_WRITE_REG(hw, E1000_VTCTRL(vf_queue), E1000_VTCTRL_RST); -} - -/** - * igb_disable_mdd - * @adapter - board private structure - * - * Disable MDD behavior in the HW - **/ -static void igb_disable_mdd(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 reg; - - if ((hw->mac.type != e1000_i350) || - (hw->mac.type != e1000_i354)) - return; - - reg = E1000_READ_REG(hw, E1000_DTXCTL); - reg &= (~E1000_DTXCTL_MDP_EN); - E1000_WRITE_REG(hw, E1000_DTXCTL, reg); -} - -/** - * igb_enable_mdd - * @adapter - board private structure - * - * Enable the HW to detect malicious driver and sends an interrupt to - * the driver. - **/ -static void igb_enable_mdd(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 reg; - - /* Only available on i350 device */ - if (hw->mac.type != e1000_i350) - return; - - reg = E1000_READ_REG(hw, E1000_DTXCTL); - reg |= E1000_DTXCTL_MDP_EN; - E1000_WRITE_REG(hw, E1000_DTXCTL, reg); -} - -/** - * igb_reset_sriov_capability - disable SR-IOV if enabled - * - * Attempt to disable single root IO virtualization capabilites present in the - * kernel. - **/ -static void igb_reset_sriov_capability(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_hw *hw = &adapter->hw; - - /* reclaim resources allocated to VFs */ - if (adapter->vf_data) { - if (!pci_vfs_assigned(pdev)) { - /* - * disable iov and allow time for transactions to - * clear - */ - pci_disable_sriov(pdev); - msleep(500); - - dev_info(pci_dev_to_dev(pdev), "IOV Disabled\n"); - } else { - dev_info(pci_dev_to_dev(pdev), "IOV Not Disabled\n " - "VF(s) are assigned to guests!\n"); - } - /* Disable Malicious Driver Detection */ - igb_disable_mdd(adapter); - - /* free vf data storage */ - kfree(adapter->vf_data); - adapter->vf_data = NULL; - - /* switch rings back to PF ownership */ - E1000_WRITE_REG(hw, E1000_IOVCTL, - E1000_IOVCTL_REUSE_VFQ); - E1000_WRITE_FLUSH(hw); - msleep(100); - } - - adapter->vfs_allocated_count = 0; -} - -/** - * igb_set_sriov_capability - setup SR-IOV if supported - * - * Attempt to enable single root IO virtualization capabilites present in the - * kernel. - **/ -static void igb_set_sriov_capability(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int old_vfs = 0; - int i; - - old_vfs = pci_num_vf(pdev); - if (old_vfs) { - dev_info(pci_dev_to_dev(pdev), - "%d pre-allocated VFs found - override " - "max_vfs setting of %d\n", old_vfs, - adapter->vfs_allocated_count); - adapter->vfs_allocated_count = old_vfs; - } - /* no VFs requested, do nothing */ - if (!adapter->vfs_allocated_count) - return; - - /* allocate vf data storage */ - adapter->vf_data = kcalloc(adapter->vfs_allocated_count, - sizeof(struct vf_data_storage), - GFP_KERNEL); - - if (adapter->vf_data) { - if (!old_vfs) { - if (pci_enable_sriov(pdev, - adapter->vfs_allocated_count)) - goto err_out; - } - for (i = 0; i < adapter->vfs_allocated_count; i++) - igb_vf_configure(adapter, i); - - switch (adapter->hw.mac.type) { - case e1000_82576: - case e1000_i350: - /* Enable VM to VM loopback by default */ - adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; - break; - default: - /* Currently no other hardware supports loopback */ - break; - } - - /* DMA Coalescing is not supported in IOV mode. */ - if (adapter->hw.mac.type >= e1000_i350) - adapter->dmac = IGB_DMAC_DISABLE; - if (adapter->hw.mac.type < e1000_i350) - adapter->flags |= IGB_FLAG_DETECT_BAD_DMA; - return; - - } - -err_out: - kfree(adapter->vf_data); - adapter->vf_data = NULL; - adapter->vfs_allocated_count = 0; - dev_warn(pci_dev_to_dev(pdev), - "Failed to initialize SR-IOV virtualization\n"); -} - -/** - * igb_set_interrupt_capability - set MSI or MSI-X if supported - * - * Attempt to configure interrupts using the best available - * capabilities of the hardware and kernel. - **/ -static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix) -{ - struct pci_dev *pdev = adapter->pdev; - int err; - int numvecs, i; - - if (!msix) - adapter->int_mode = IGB_INT_MODE_MSI; - - /* Number of supported queues. */ - adapter->num_rx_queues = adapter->rss_queues; - - if (adapter->vmdq_pools > 1) - adapter->num_rx_queues += adapter->vmdq_pools - 1; - -#ifdef HAVE_TX_MQ - if (adapter->vmdq_pools) - adapter->num_tx_queues = adapter->vmdq_pools; - else - adapter->num_tx_queues = adapter->num_rx_queues; -#else - adapter->num_tx_queues = max_t(u32, 1, adapter->vmdq_pools); -#endif - - switch (adapter->int_mode) { - case IGB_INT_MODE_MSIX: - /* start with one vector for every rx queue */ - numvecs = adapter->num_rx_queues; - - /* if tx handler is separate add 1 for every tx queue */ - if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) - numvecs += adapter->num_tx_queues; - - /* store the number of vectors reserved for queues */ - adapter->num_q_vectors = numvecs; - - /* add 1 vector for link status interrupts */ - numvecs++; - adapter->msix_entries = kcalloc(numvecs, - sizeof(struct msix_entry), - GFP_KERNEL); - if (adapter->msix_entries) { - for (i = 0; i < numvecs; i++) - adapter->msix_entries[i].entry = i; - -#ifdef HAVE_PCI_ENABLE_MSIX - err = pci_enable_msix(pdev, - adapter->msix_entries, numvecs); -#else - err = pci_enable_msix_range(pdev, - adapter->msix_entries, - numvecs, - numvecs); -#endif - if (err == 0) - break; - } - /* MSI-X failed, so fall through and try MSI */ - dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI-X interrupts. " - "Falling back to MSI interrupts.\n"); - igb_reset_interrupt_capability(adapter); - case IGB_INT_MODE_MSI: - if (!pci_enable_msi(pdev)) - adapter->flags |= IGB_FLAG_HAS_MSI; - else - dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI " - "interrupts. Falling back to legacy " - "interrupts.\n"); - /* Fall through */ - case IGB_INT_MODE_LEGACY: - /* disable advanced features and set number of queues to 1 */ - igb_reset_sriov_capability(adapter); - adapter->vmdq_pools = 0; - adapter->rss_queues = 1; - adapter->flags |= IGB_FLAG_QUEUE_PAIRS; - adapter->num_rx_queues = 1; - adapter->num_tx_queues = 1; - adapter->num_q_vectors = 1; - /* Don't do anything; this is system default */ - break; - } -} - -static void igb_add_ring(struct igb_ring *ring, - struct igb_ring_container *head) -{ - head->ring = ring; - head->count++; -} - -/** - * igb_alloc_q_vector - Allocate memory for a single interrupt vector - * @adapter: board private structure to initialize - * @v_count: q_vectors allocated on adapter, used for ring interleaving - * @v_idx: index of vector in adapter struct - * @txr_count: total number of Tx rings to allocate - * @txr_idx: index of first Tx ring to allocate - * @rxr_count: total number of Rx rings to allocate - * @rxr_idx: index of first Rx ring to allocate - * - * We allocate one q_vector. If allocation fails we return -ENOMEM. - **/ -static int igb_alloc_q_vector(struct igb_adapter *adapter, - unsigned int v_count, unsigned int v_idx, - unsigned int txr_count, unsigned int txr_idx, - unsigned int rxr_count, unsigned int rxr_idx) -{ - struct igb_q_vector *q_vector; - struct igb_ring *ring; - int ring_count, size; - - /* igb only supports 1 Tx and/or 1 Rx queue per vector */ - if (txr_count > 1 || rxr_count > 1) - return -ENOMEM; - - ring_count = txr_count + rxr_count; - size = sizeof(struct igb_q_vector) + - (sizeof(struct igb_ring) * ring_count); - - /* allocate q_vector and rings */ - q_vector = kzalloc(size, GFP_KERNEL); - if (!q_vector) - return -ENOMEM; - -#ifndef IGB_NO_LRO - /* initialize LRO */ - __skb_queue_head_init(&q_vector->lrolist.active); - -#endif - /* initialize NAPI */ - netif_napi_add(adapter->netdev, &q_vector->napi, - igb_poll, 64); - - /* tie q_vector and adapter together */ - adapter->q_vector[v_idx] = q_vector; - q_vector->adapter = adapter; - - /* initialize work limits */ - q_vector->tx.work_limit = adapter->tx_work_limit; - - /* initialize ITR configuration */ - q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0); - q_vector->itr_val = IGB_START_ITR; - - /* initialize pointer to rings */ - ring = q_vector->ring; - - /* initialize ITR */ - if (rxr_count) { - /* rx or rx/tx vector */ - if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3) - q_vector->itr_val = adapter->rx_itr_setting; - } else { - /* tx only vector */ - if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3) - q_vector->itr_val = adapter->tx_itr_setting; - } - - if (txr_count) { - /* assign generic ring traits */ - ring->dev = &adapter->pdev->dev; - ring->netdev = adapter->netdev; - - /* configure backlink on ring */ - ring->q_vector = q_vector; - - /* update q_vector Tx values */ - igb_add_ring(ring, &q_vector->tx); - - /* For 82575, context index must be unique per ring. */ - if (adapter->hw.mac.type == e1000_82575) - set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags); - - /* apply Tx specific ring traits */ - ring->count = adapter->tx_ring_count; - ring->queue_index = txr_idx; - - /* assign ring to adapter */ - adapter->tx_ring[txr_idx] = ring; - - /* push pointer to next ring */ - ring++; - } - - if (rxr_count) { - /* assign generic ring traits */ - ring->dev = &adapter->pdev->dev; - ring->netdev = adapter->netdev; - - /* configure backlink on ring */ - ring->q_vector = q_vector; - - /* update q_vector Rx values */ - igb_add_ring(ring, &q_vector->rx); - -#ifndef HAVE_NDO_SET_FEATURES - /* enable rx checksum */ - set_bit(IGB_RING_FLAG_RX_CSUM, &ring->flags); - -#endif - /* set flag indicating ring supports SCTP checksum offload */ - if (adapter->hw.mac.type >= e1000_82576) - set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags); - - if ((adapter->hw.mac.type == e1000_i350) || - (adapter->hw.mac.type == e1000_i354)) - set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags); - - /* apply Rx specific ring traits */ - ring->count = adapter->rx_ring_count; - ring->queue_index = rxr_idx; - - /* assign ring to adapter */ - adapter->rx_ring[rxr_idx] = ring; - } - - return 0; -} - -/** - * igb_alloc_q_vectors - Allocate memory for interrupt vectors - * @adapter: board private structure to initialize - * - * We allocate one q_vector per queue interrupt. If allocation fails we - * return -ENOMEM. - **/ -static int igb_alloc_q_vectors(struct igb_adapter *adapter) -{ - int q_vectors = adapter->num_q_vectors; - int rxr_remaining = adapter->num_rx_queues; - int txr_remaining = adapter->num_tx_queues; - int rxr_idx = 0, txr_idx = 0, v_idx = 0; - int err; - - if (q_vectors >= (rxr_remaining + txr_remaining)) { - for (; rxr_remaining; v_idx++) { - err = igb_alloc_q_vector(adapter, q_vectors, v_idx, - 0, 0, 1, rxr_idx); - - if (err) - goto err_out; - - /* update counts and index */ - rxr_remaining--; - rxr_idx++; - } - } - - for (; v_idx < q_vectors; v_idx++) { - int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); - int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); - err = igb_alloc_q_vector(adapter, q_vectors, v_idx, - tqpv, txr_idx, rqpv, rxr_idx); - - if (err) - goto err_out; - - /* update counts and index */ - rxr_remaining -= rqpv; - txr_remaining -= tqpv; - rxr_idx++; - txr_idx++; - } - - return 0; - -err_out: - adapter->num_tx_queues = 0; - adapter->num_rx_queues = 0; - adapter->num_q_vectors = 0; - - while (v_idx--) - igb_free_q_vector(adapter, v_idx); - - return -ENOMEM; -} - -/** - * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors - * - * This function initializes the interrupts and allocates all of the queues. - **/ -static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix) -{ - struct pci_dev *pdev = adapter->pdev; - int err; - - igb_set_interrupt_capability(adapter, msix); - - err = igb_alloc_q_vectors(adapter); - if (err) { - dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for vectors\n"); - goto err_alloc_q_vectors; - } - - igb_cache_ring_register(adapter); - - return 0; - -err_alloc_q_vectors: - igb_reset_interrupt_capability(adapter); - return err; -} - -/** - * igb_request_irq - initialize interrupts - * - * Attempts to configure interrupts using the best available - * capabilities of the hardware and kernel. - **/ -static int igb_request_irq(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - int err = 0; - - if (adapter->msix_entries) { - err = igb_request_msix(adapter); - if (!err) - goto request_done; - /* fall back to MSI */ - igb_free_all_tx_resources(adapter); - igb_free_all_rx_resources(adapter); - - igb_clear_interrupt_scheme(adapter); - igb_reset_sriov_capability(adapter); - err = igb_init_interrupt_scheme(adapter, false); - if (err) - goto request_done; - igb_setup_all_tx_resources(adapter); - igb_setup_all_rx_resources(adapter); - igb_configure(adapter); - } - - igb_assign_vector(adapter->q_vector[0], 0); - - if (adapter->flags & IGB_FLAG_HAS_MSI) { - err = request_irq(pdev->irq, &igb_intr_msi, 0, - netdev->name, adapter); - if (!err) - goto request_done; - - /* fall back to legacy interrupts */ - igb_reset_interrupt_capability(adapter); - adapter->flags &= ~IGB_FLAG_HAS_MSI; - } - - err = request_irq(pdev->irq, &igb_intr, IRQF_SHARED, - netdev->name, adapter); - - if (err) - dev_err(pci_dev_to_dev(pdev), "Error %d getting interrupt\n", - err); - -request_done: - return err; -} - -static void igb_free_irq(struct igb_adapter *adapter) -{ - if (adapter->msix_entries) { - int vector = 0, i; - - free_irq(adapter->msix_entries[vector++].vector, adapter); - - for (i = 0; i < adapter->num_q_vectors; i++) - free_irq(adapter->msix_entries[vector++].vector, - adapter->q_vector[i]); - } else { - free_irq(adapter->pdev->irq, adapter); - } -} - -/** - * igb_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - **/ -static void igb_irq_disable(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - /* - * we need to be careful when disabling interrupts. The VFs are also - * mapped into these registers and so clearing the bits can cause - * issues on the VF drivers so we only need to clear what we set - */ - if (adapter->msix_entries) { - u32 regval = E1000_READ_REG(hw, E1000_EIAM); - E1000_WRITE_REG(hw, E1000_EIAM, regval & ~adapter->eims_enable_mask); - E1000_WRITE_REG(hw, E1000_EIMC, adapter->eims_enable_mask); - regval = E1000_READ_REG(hw, E1000_EIAC); - E1000_WRITE_REG(hw, E1000_EIAC, regval & ~adapter->eims_enable_mask); - } - - E1000_WRITE_REG(hw, E1000_IAM, 0); - E1000_WRITE_REG(hw, E1000_IMC, ~0); - E1000_WRITE_FLUSH(hw); - - if (adapter->msix_entries) { - int vector = 0, i; - - synchronize_irq(adapter->msix_entries[vector++].vector); - - for (i = 0; i < adapter->num_q_vectors; i++) - synchronize_irq(adapter->msix_entries[vector++].vector); - } else { - synchronize_irq(adapter->pdev->irq); - } -} - -/** - * igb_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - **/ -static void igb_irq_enable(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - if (adapter->msix_entries) { - u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA; - u32 regval = E1000_READ_REG(hw, E1000_EIAC); - E1000_WRITE_REG(hw, E1000_EIAC, regval | adapter->eims_enable_mask); - regval = E1000_READ_REG(hw, E1000_EIAM); - E1000_WRITE_REG(hw, E1000_EIAM, regval | adapter->eims_enable_mask); - E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_enable_mask); - if (adapter->vfs_allocated_count) { - E1000_WRITE_REG(hw, E1000_MBVFIMR, 0xFF); - ims |= E1000_IMS_VMMB; - if (adapter->mdd) - if ((adapter->hw.mac.type == e1000_i350) || - (adapter->hw.mac.type == e1000_i354)) - ims |= E1000_IMS_MDDET; - } - E1000_WRITE_REG(hw, E1000_IMS, ims); - } else { - E1000_WRITE_REG(hw, E1000_IMS, IMS_ENABLE_MASK | - E1000_IMS_DRSTA); - E1000_WRITE_REG(hw, E1000_IAM, IMS_ENABLE_MASK | - E1000_IMS_DRSTA); - } -} - -static void igb_update_mng_vlan(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 vid = adapter->hw.mng_cookie.vlan_id; - u16 old_vid = adapter->mng_vlan_id; - - if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { - /* add VID to filter table */ - igb_vfta_set(adapter, vid, TRUE); - adapter->mng_vlan_id = vid; - } else { - adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; - } - - if ((old_vid != (u16)IGB_MNG_VLAN_NONE) && - (vid != old_vid) && -#ifdef HAVE_VLAN_RX_REGISTER - !vlan_group_get_device(adapter->vlgrp, old_vid)) { -#else - !test_bit(old_vid, adapter->active_vlans)) { -#endif - /* remove VID from filter table */ - igb_vfta_set(adapter, old_vid, FALSE); - } -} - -/** - * igb_release_hw_control - release control of the h/w to f/w - * @adapter: address of board private structure - * - * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that the - * driver is no longer loaded. - * - **/ -static void igb_release_hw_control(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext; - - /* Let firmware take over control of h/w */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - E1000_WRITE_REG(hw, E1000_CTRL_EXT, - ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); -} - -/** - * igb_get_hw_control - get control of the h/w from f/w - * @adapter: address of board private structure - * - * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that - * the driver is loaded. - * - **/ -static void igb_get_hw_control(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext; - - /* Let firmware know the driver has taken over */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - E1000_WRITE_REG(hw, E1000_CTRL_EXT, - ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); -} - -/** - * igb_configure - configure the hardware for RX and TX - * @adapter: private board structure - **/ -static void igb_configure(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - int i; - - igb_get_hw_control(adapter); - igb_set_rx_mode(netdev); - - igb_restore_vlan(adapter); - - igb_setup_tctl(adapter); - igb_setup_mrqc(adapter); - igb_setup_rctl(adapter); - - igb_configure_tx(adapter); - igb_configure_rx(adapter); - - e1000_rx_fifo_flush_82575(&adapter->hw); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE - if (adapter->num_tx_queues > 1) - netdev->features |= NETIF_F_MULTI_QUEUE; - else - netdev->features &= ~NETIF_F_MULTI_QUEUE; -#endif - - /* call igb_desc_unused which always leaves - * at least 1 descriptor unused to make sure - * next_to_use != next_to_clean */ - for (i = 0; i < adapter->num_rx_queues; i++) { - struct igb_ring *ring = adapter->rx_ring[i]; - igb_alloc_rx_buffers(ring, igb_desc_unused(ring)); - } -} - -/** - * igb_power_up_link - Power up the phy/serdes link - * @adapter: address of board private structure - **/ -void igb_power_up_link(struct igb_adapter *adapter) -{ - e1000_phy_hw_reset(&adapter->hw); - - if (adapter->hw.phy.media_type == e1000_media_type_copper) - e1000_power_up_phy(&adapter->hw); - else - e1000_power_up_fiber_serdes_link(&adapter->hw); -} - -/** - * igb_power_down_link - Power down the phy/serdes link - * @adapter: address of board private structure - */ -static void igb_power_down_link(struct igb_adapter *adapter) -{ - if (adapter->hw.phy.media_type == e1000_media_type_copper) - e1000_power_down_phy(&adapter->hw); - else - e1000_shutdown_fiber_serdes_link(&adapter->hw); -} - -/* Detect and switch function for Media Auto Sense */ -static void igb_check_swap_media(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext, connsw; - bool swap_now = false; - bool link; - - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - connsw = E1000_READ_REG(hw, E1000_CONNSW); - link = igb_has_link(adapter); - (void) link; - - /* need to live swap if current media is copper and we have fiber/serdes - * to go to. - */ - - if ((hw->phy.media_type == e1000_media_type_copper) && - (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) { - swap_now = true; - } else if (!(connsw & E1000_CONNSW_SERDESD)) { - /* copper signal takes time to appear */ - if (adapter->copper_tries < 2) { - adapter->copper_tries++; - connsw |= E1000_CONNSW_AUTOSENSE_CONF; - E1000_WRITE_REG(hw, E1000_CONNSW, connsw); - return; - } else { - adapter->copper_tries = 0; - if ((connsw & E1000_CONNSW_PHYSD) && - (!(connsw & E1000_CONNSW_PHY_PDN))) { - swap_now = true; - connsw &= ~E1000_CONNSW_AUTOSENSE_CONF; - E1000_WRITE_REG(hw, E1000_CONNSW, connsw); - } - } - } - - if (swap_now) { - switch (hw->phy.media_type) { - case e1000_media_type_copper: - dev_info(pci_dev_to_dev(adapter->pdev), - "%s:MAS: changing media to fiber/serdes\n", - adapter->netdev->name); - ctrl_ext |= - E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; - adapter->flags |= IGB_FLAG_MEDIA_RESET; - adapter->copper_tries = 0; - break; - case e1000_media_type_internal_serdes: - case e1000_media_type_fiber: - dev_info(pci_dev_to_dev(adapter->pdev), - "%s:MAS: changing media to copper\n", - adapter->netdev->name); - ctrl_ext &= - ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; - adapter->flags |= IGB_FLAG_MEDIA_RESET; - break; - default: - /* shouldn't get here during regular operation */ - dev_err(pci_dev_to_dev(adapter->pdev), - "%s:AMS: Invalid media type found, returning\n", - adapter->netdev->name); - break; - } - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - } -} - -#ifdef HAVE_I2C_SUPPORT -/* igb_get_i2c_data - Reads the I2C SDA data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Returns the I2C data bit value - */ -static int igb_get_i2c_data(void *data) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - return (i2cctl & E1000_I2C_DATA_IN) != 0; -} - -/* igb_set_i2c_data - Sets the I2C data bit - * @data: pointer to hardware structure - * @state: I2C data value (0 or 1) to set - * - * Sets the I2C data bit - */ -static void igb_set_i2c_data(void *data, int state) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - if (state) - i2cctl |= E1000_I2C_DATA_OUT; - else - i2cctl &= ~E1000_I2C_DATA_OUT; - - i2cctl &= ~E1000_I2C_DATA_OE_N; - i2cctl |= E1000_I2C_CLK_OE_N; - - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); - E1000_WRITE_FLUSH(hw); - -} - -/* igb_set_i2c_clk - Sets the I2C SCL clock - * @data: pointer to hardware structure - * @state: state to set clock - * - * Sets the I2C clock line to state - */ -static void igb_set_i2c_clk(void *data, int state) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - if (state) { - i2cctl |= E1000_I2C_CLK_OUT; - i2cctl &= ~E1000_I2C_CLK_OE_N; - } else { - i2cctl &= ~E1000_I2C_CLK_OUT; - i2cctl &= ~E1000_I2C_CLK_OE_N; - } - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); - E1000_WRITE_FLUSH(hw); -} - -/* igb_get_i2c_clk - Gets the I2C SCL clock state - * @data: pointer to hardware structure - * - * Gets the I2C clock state - */ -static int igb_get_i2c_clk(void *data) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - return (i2cctl & E1000_I2C_CLK_IN) != 0; -} - -static const struct i2c_algo_bit_data igb_i2c_algo = { - .setsda = igb_set_i2c_data, - .setscl = igb_set_i2c_clk, - .getsda = igb_get_i2c_data, - .getscl = igb_get_i2c_clk, - .udelay = 5, - .timeout = 20, -}; - -/* igb_init_i2c - Init I2C interface - * @adapter: pointer to adapter structure - * - */ -static s32 igb_init_i2c(struct igb_adapter *adapter) -{ - s32 status = E1000_SUCCESS; - - /* I2C interface supported on i350 devices */ - if (adapter->hw.mac.type != e1000_i350) - return E1000_SUCCESS; - - /* Initialize the i2c bus which is controlled by the registers. - * This bus will use the i2c_algo_bit structue that implements - * the protocol through toggling of the 4 bits in the register. - */ - adapter->i2c_adap.owner = THIS_MODULE; - adapter->i2c_algo = igb_i2c_algo; - adapter->i2c_algo.data = adapter; - adapter->i2c_adap.algo_data = &adapter->i2c_algo; - adapter->i2c_adap.dev.parent = &adapter->pdev->dev; - strlcpy(adapter->i2c_adap.name, "igb BB", - sizeof(adapter->i2c_adap.name)); - status = i2c_bit_add_bus(&adapter->i2c_adap); - return status; -} - -#endif /* HAVE_I2C_SUPPORT */ -/** - * igb_up - Open the interface and prepare it to handle traffic - * @adapter: board private structure - **/ -int igb_up(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - /* hardware has been reset, we need to reload some things */ - igb_configure(adapter); - - clear_bit(__IGB_DOWN, &adapter->state); - - for (i = 0; i < adapter->num_q_vectors; i++) - napi_enable(&(adapter->q_vector[i]->napi)); - - if (adapter->msix_entries) - igb_configure_msix(adapter); - else - igb_assign_vector(adapter->q_vector[0], 0); - - igb_configure_lli(adapter); - - /* Clear any pending interrupts. */ - E1000_READ_REG(hw, E1000_ICR); - igb_irq_enable(adapter); - - /* notify VFs that reset has been completed */ - if (adapter->vfs_allocated_count) { - u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg_data |= E1000_CTRL_EXT_PFRSTD; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); - } - - netif_tx_start_all_queues(adapter->netdev); - - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - schedule_work(&adapter->dma_err_task); - /* start the watchdog. */ - hw->mac.get_link_status = 1; - schedule_work(&adapter->watchdog_task); - - if ((adapter->flags & IGB_FLAG_EEE) && - (!hw->dev_spec._82575.eee_disable)) - adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; - - return 0; -} - -void igb_down(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; - u32 tctl, rctl; - int i; - - /* signal that we're down so the interrupt handler does not - * reschedule our watchdog timer */ - set_bit(__IGB_DOWN, &adapter->state); - - /* disable receives in the hardware */ - rctl = E1000_READ_REG(hw, E1000_RCTL); - E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN); - /* flush and sleep below */ - - netif_tx_stop_all_queues(netdev); - - /* disable transmits in the hardware */ - tctl = E1000_READ_REG(hw, E1000_TCTL); - tctl &= ~E1000_TCTL_EN; - E1000_WRITE_REG(hw, E1000_TCTL, tctl); - /* flush both disables and wait for them to finish */ - E1000_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - for (i = 0; i < adapter->num_q_vectors; i++) - napi_disable(&(adapter->q_vector[i]->napi)); - - igb_irq_disable(adapter); - - adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; - - del_timer_sync(&adapter->watchdog_timer); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - del_timer_sync(&adapter->dma_err_timer); - del_timer_sync(&adapter->phy_info_timer); - - netif_carrier_off(netdev); - - /* record the stats before reset*/ - igb_update_stats(adapter); - - adapter->link_speed = 0; - adapter->link_duplex = 0; - -#ifdef HAVE_PCI_ERS - if (!pci_channel_offline(adapter->pdev)) - igb_reset(adapter); -#else - igb_reset(adapter); -#endif - igb_clean_all_tx_rings(adapter); - igb_clean_all_rx_rings(adapter); -#ifdef IGB_DCA - /* since we reset the hardware DCA settings were cleared */ - igb_setup_dca(adapter); -#endif -} - -void igb_reinit_locked(struct igb_adapter *adapter) -{ - WARN_ON(in_interrupt()); - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - igb_down(adapter); - igb_up(adapter); - clear_bit(__IGB_RESETTING, &adapter->state); -} - -/** - * igb_enable_mas - Media Autosense re-enable after swap - * - * @adapter: adapter struct - **/ -static s32 igb_enable_mas(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 connsw; - s32 ret_val = E1000_SUCCESS; - - connsw = E1000_READ_REG(hw, E1000_CONNSW); - if (hw->phy.media_type == e1000_media_type_copper) { - /* configure for SerDes media detect */ - if (!(connsw & E1000_CONNSW_SERDESD)) { - connsw |= E1000_CONNSW_ENRGSRC; - connsw |= E1000_CONNSW_AUTOSENSE_EN; - E1000_WRITE_REG(hw, E1000_CONNSW, connsw); - E1000_WRITE_FLUSH(hw); - } else if (connsw & E1000_CONNSW_SERDESD) { - /* already SerDes, no need to enable anything */ - return ret_val; - } else { - dev_info(pci_dev_to_dev(adapter->pdev), - "%s:MAS: Unable to configure feature, disabling..\n", - adapter->netdev->name); - adapter->flags &= ~IGB_FLAG_MAS_ENABLE; - } - } - return ret_val; -} - -void igb_reset(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_hw *hw = &adapter->hw; - struct e1000_mac_info *mac = &hw->mac; - struct e1000_fc_info *fc = &hw->fc; - u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm; - - /* Repartition Pba for greater than 9k mtu - * To take effect CTRL.RST is required. - */ - switch (mac->type) { - case e1000_i350: - case e1000_82580: - case e1000_i354: - pba = E1000_READ_REG(hw, E1000_RXPBS); - pba = e1000_rxpbs_adjust_82580(pba); - break; - case e1000_82576: - pba = E1000_READ_REG(hw, E1000_RXPBS); - pba &= E1000_RXPBS_SIZE_MASK_82576; - break; - case e1000_82575: - case e1000_i210: - case e1000_i211: - default: - pba = E1000_PBA_34K; - break; - } - - if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) && - (mac->type < e1000_82576)) { - /* adjust PBA for jumbo frames */ - E1000_WRITE_REG(hw, E1000_PBA, pba); - - /* To maintain wire speed transmits, the Tx FIFO should be - * large enough to accommodate two full transmit packets, - * rounded up to the next 1KB and expressed in KB. Likewise, - * the Rx FIFO should be large enough to accommodate at least - * one full receive packet and is similarly rounded up and - * expressed in KB. */ - pba = E1000_READ_REG(hw, E1000_PBA); - /* upper 16 bits has Tx packet buffer allocation size in KB */ - tx_space = pba >> 16; - /* lower 16 bits has Rx packet buffer allocation size in KB */ - pba &= 0xffff; - /* the tx fifo also stores 16 bytes of information about the tx - * but don't include ethernet FCS because hardware appends it */ - min_tx_space = (adapter->max_frame_size + - sizeof(union e1000_adv_tx_desc) - - ETH_FCS_LEN) * 2; - min_tx_space = ALIGN(min_tx_space, 1024); - min_tx_space >>= 10; - /* software strips receive CRC, so leave room for it */ - min_rx_space = adapter->max_frame_size; - min_rx_space = ALIGN(min_rx_space, 1024); - min_rx_space >>= 10; - - /* If current Tx allocation is less than the min Tx FIFO size, - * and the min Tx FIFO size is less than the current Rx FIFO - * allocation, take space away from current Rx allocation */ - if (tx_space < min_tx_space && - ((min_tx_space - tx_space) < pba)) { - pba = pba - (min_tx_space - tx_space); - - /* if short on rx space, rx wins and must trump tx - * adjustment */ - if (pba < min_rx_space) - pba = min_rx_space; - } - E1000_WRITE_REG(hw, E1000_PBA, pba); - } - - /* flow control settings */ - /* The high water mark must be low enough to fit one full frame - * (or the size used for early receive) above it in the Rx FIFO. - * Set it to the lower of: - * - 90% of the Rx FIFO size, or - * - the full Rx FIFO size minus one full frame */ - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - 2 * adapter->max_frame_size)); - - fc->high_water = hwm & 0xFFFFFFF0; /* 16-byte granularity */ - fc->low_water = fc->high_water - 16; - fc->pause_time = 0xFFFF; - fc->send_xon = 1; - fc->current_mode = fc->requested_mode; - - /* disable receive for all VFs and wait one second */ - if (adapter->vfs_allocated_count) { - int i; - /* - * Clear all flags except indication that the PF has set - * the VF MAC addresses administratively - */ - for (i = 0 ; i < adapter->vfs_allocated_count; i++) - adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC; - - /* ping all the active vfs to let them know we are going down */ - igb_ping_all_vfs(adapter); - - /* disable transmits and receives */ - E1000_WRITE_REG(hw, E1000_VFRE, 0); - E1000_WRITE_REG(hw, E1000_VFTE, 0); - } - - /* Allow time for pending master requests to run */ - e1000_reset_hw(hw); - E1000_WRITE_REG(hw, E1000_WUC, 0); - - if (adapter->flags & IGB_FLAG_MEDIA_RESET) { - e1000_setup_init_funcs(hw, TRUE); - igb_check_options(adapter); - e1000_get_bus_info(hw); - adapter->flags &= ~IGB_FLAG_MEDIA_RESET; - } - if (adapter->flags & IGB_FLAG_MAS_ENABLE) { - if (igb_enable_mas(adapter)) - dev_err(pci_dev_to_dev(pdev), - "Error enabling Media Auto Sense\n"); - } - if (e1000_init_hw(hw)) - dev_err(pci_dev_to_dev(pdev), "Hardware Error\n"); - - /* - * Flow control settings reset on hardware reset, so guarantee flow - * control is off when forcing speed. - */ - if (!hw->mac.autoneg) - e1000_force_mac_fc(hw); - - igb_init_dmac(adapter, pba); - /* Re-initialize the thermal sensor on i350 devices. */ - if (mac->type == e1000_i350 && hw->bus.func == 0) { - /* - * If present, re-initialize the external thermal sensor - * interface. - */ - if (adapter->ets) - e1000_set_i2c_bb(hw); - e1000_init_thermal_sensor_thresh(hw); - } - - /*Re-establish EEE setting */ - if (hw->phy.media_type == e1000_media_type_copper) { - switch (mac->type) { - case e1000_i350: - case e1000_i210: - case e1000_i211: - e1000_set_eee_i350(hw); - break; - case e1000_i354: - e1000_set_eee_i354(hw); - break; - default: - break; - } - } - - if (!netif_running(adapter->netdev)) - igb_power_down_link(adapter); - - igb_update_mng_vlan(adapter); - - /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ - E1000_WRITE_REG(hw, E1000_VET, ETHERNET_IEEE_VLAN_TYPE); - - -#ifdef HAVE_PTP_1588_CLOCK - /* Re-enable PTP, where applicable. */ - igb_ptp_reset(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - - e1000_get_phy_info(hw); - - adapter->devrc++; -} - -#ifdef HAVE_NDO_SET_FEATURES -static kni_netdev_features_t igb_fix_features(struct net_device *netdev, - kni_netdev_features_t features) -{ - /* - * Since there is no support for separate tx vlan accel - * enabled make sure tx flag is cleared if rx is. - */ -#ifdef NETIF_F_HW_VLAN_CTAG_RX - if (!(features & NETIF_F_HW_VLAN_CTAG_RX)) - features &= ~NETIF_F_HW_VLAN_CTAG_TX; -#else - if (!(features & NETIF_F_HW_VLAN_RX)) - features &= ~NETIF_F_HW_VLAN_TX; -#endif - - /* If Rx checksum is disabled, then LRO should also be disabled */ - if (!(features & NETIF_F_RXCSUM)) - features &= ~NETIF_F_LRO; - - return features; -} - -static int igb_set_features(struct net_device *netdev, - kni_netdev_features_t features) -{ - u32 changed = netdev->features ^ features; - -#ifdef NETIF_F_HW_VLAN_CTAG_RX - if (changed & NETIF_F_HW_VLAN_CTAG_RX) -#else - if (changed & NETIF_F_HW_VLAN_RX) -#endif - igb_vlan_mode(netdev, features); - - return 0; -} - -#ifdef NTF_SELF -#ifdef USE_CONST_DEV_UC_CHAR -static int igb_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], - struct net_device *dev, - const unsigned char *addr, -#ifdef HAVE_NDO_FDB_ADD_VID - u16 vid, -#endif -#ifdef HAVE_NDO_FDB_ADD_EXTACK - u16 flags, - struct netlink_ext_ack *extack) -#else - u16 flags) -#endif - -#else -static int igb_ndo_fdb_add(struct ndmsg *ndm, - struct net_device *dev, - unsigned char *addr, - u16 flags) -#endif -{ - struct igb_adapter *adapter = netdev_priv(dev); - struct e1000_hw *hw = &adapter->hw; - int err; - - if (!(adapter->vfs_allocated_count)) - return -EOPNOTSUPP; - - /* Hardware does not support aging addresses so if a - * ndm_state is given only allow permanent addresses - */ - if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) { - pr_info("%s: FDB only supports static addresses\n", - igb_driver_name); - return -EINVAL; - } - - if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) { - u32 rar_uc_entries = hw->mac.rar_entry_count - - (adapter->vfs_allocated_count + 1); - - if (netdev_uc_count(dev) < rar_uc_entries) - err = dev_uc_add_excl(dev, addr); - else - err = -ENOMEM; - } else if (is_multicast_ether_addr(addr)) { - err = dev_mc_add_excl(dev, addr); - } else { - err = -EINVAL; - } - - /* Only return duplicate errors if NLM_F_EXCL is set */ - if (err == -EEXIST && !(flags & NLM_F_EXCL)) - err = 0; - - return err; -} - -#ifndef USE_DEFAULT_FDB_DEL_DUMP -#ifdef USE_CONST_DEV_UC_CHAR -static int igb_ndo_fdb_del(struct ndmsg *ndm, - struct net_device *dev, - const unsigned char *addr) -#else -static int igb_ndo_fdb_del(struct ndmsg *ndm, - struct net_device *dev, - unsigned char *addr) -#endif -{ - struct igb_adapter *adapter = netdev_priv(dev); - int err = -EOPNOTSUPP; - - if (ndm->ndm_state & NUD_PERMANENT) { - pr_info("%s: FDB only supports static addresses\n", - igb_driver_name); - return -EINVAL; - } - - if (adapter->vfs_allocated_count) { - if (is_unicast_ether_addr(addr)) - err = dev_uc_del(dev, addr); - else if (is_multicast_ether_addr(addr)) - err = dev_mc_del(dev, addr); - else - err = -EINVAL; - } - - return err; -} - -static int igb_ndo_fdb_dump(struct sk_buff *skb, - struct netlink_callback *cb, - struct net_device *dev, - int idx) -{ - struct igb_adapter *adapter = netdev_priv(dev); - - if (adapter->vfs_allocated_count) - idx = ndo_dflt_fdb_dump(skb, cb, dev, idx); - - return idx; -} -#endif /* USE_DEFAULT_FDB_DEL_DUMP */ - -#ifdef HAVE_BRIDGE_ATTRIBS -#ifdef HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS -static int igb_ndo_bridge_setlink(struct net_device *dev, - struct nlmsghdr *nlh, -#ifdef HAVE_NDO_BRIDGE_SETLINK_EXTACK - u16 flags, struct netlink_ext_ack *extack) -#else - u16 flags) -#endif - -#else -static int igb_ndo_bridge_setlink(struct net_device *dev, - struct nlmsghdr *nlh) -#endif /* HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS */ -{ - struct igb_adapter *adapter = netdev_priv(dev); - struct e1000_hw *hw = &adapter->hw; - struct nlattr *attr, *br_spec; - int rem; - - if (!(adapter->vfs_allocated_count)) - return -EOPNOTSUPP; - - switch (adapter->hw.mac.type) { - case e1000_82576: - case e1000_i350: - case e1000_i354: - break; - default: - return -EOPNOTSUPP; - } - - br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); - - nla_for_each_nested(attr, br_spec, rem) { - __u16 mode; - - if (nla_type(attr) != IFLA_BRIDGE_MODE) - continue; - - mode = nla_get_u16(attr); - if (mode == BRIDGE_MODE_VEPA) { - e1000_vmdq_set_loopback_pf(hw, 0); - adapter->flags &= ~IGB_FLAG_LOOPBACK_ENABLE; - } else if (mode == BRIDGE_MODE_VEB) { - e1000_vmdq_set_loopback_pf(hw, 1); - adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; - } else - return -EINVAL; - - netdev_info(adapter->netdev, "enabling bridge mode: %s\n", - mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); - } - - return 0; -} - -#ifdef HAVE_BRIDGE_FILTER -#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS -static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev, u32 filter_mask, - int nlflags) -#else -static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev, u32 filter_mask) -#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ -#else -static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev) -#endif -{ - struct igb_adapter *adapter = netdev_priv(dev); - u16 mode; - - if (!(adapter->vfs_allocated_count)) - return -EOPNOTSUPP; - - if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE) - mode = BRIDGE_MODE_VEB; - else - mode = BRIDGE_MODE_VEPA; - -#ifdef HAVE_NDO_DFLT_BRIDGE_ADD_MASK -#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS -#ifdef HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, - nlflags, filter_mask, NULL); -#else - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags); -#endif /* HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL */ -#else - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0); -#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ -#else - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode); -#endif /* HAVE_NDO_DFLT_BRIDGE_ADD_MASK */ -} -#endif /* HAVE_BRIDGE_ATTRIBS */ -#endif /* NTF_SELF */ - -#endif /* HAVE_NDO_SET_FEATURES */ -#ifdef HAVE_NET_DEVICE_OPS -static const struct net_device_ops igb_netdev_ops = { - .ndo_open = igb_open, - .ndo_stop = igb_close, - .ndo_start_xmit = igb_xmit_frame, - .ndo_get_stats = igb_get_stats, - .ndo_set_rx_mode = igb_set_rx_mode, - .ndo_set_mac_address = igb_set_mac, - .ndo_change_mtu = igb_change_mtu, - .ndo_do_ioctl = igb_ioctl, - .ndo_tx_timeout = igb_tx_timeout, - .ndo_validate_addr = eth_validate_addr, - .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid, -#ifdef IFLA_VF_MAX - .ndo_set_vf_mac = igb_ndo_set_vf_mac, - .ndo_set_vf_vlan = igb_ndo_set_vf_vlan, -#ifdef HAVE_VF_MIN_MAX_TXRATE - .ndo_set_vf_rate = igb_ndo_set_vf_bw, -#else /* HAVE_VF_MIN_MAX_TXRATE */ - .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw, -#endif /* HAVE_VF_MIN_MAX_TXRATE */ - .ndo_get_vf_config = igb_ndo_get_vf_config, -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE - .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk, -#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ -#endif /* IFLA_VF_MAX */ -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = igb_netpoll, -#endif -#ifdef HAVE_NDO_SET_FEATURES - .ndo_fix_features = igb_fix_features, - .ndo_set_features = igb_set_features, -#endif -#ifdef HAVE_VLAN_RX_REGISTER - .ndo_vlan_rx_register = igb_vlan_mode, -#endif -#ifndef HAVE_RHEL6_NETDEV_OPS_EXT_FDB -#ifdef NTF_SELF - .ndo_fdb_add = igb_ndo_fdb_add, -#ifndef USE_DEFAULT_FDB_DEL_DUMP - .ndo_fdb_del = igb_ndo_fdb_del, - .ndo_fdb_dump = igb_ndo_fdb_dump, -#endif -#endif /* ! HAVE_RHEL6_NETDEV_OPS_EXT_FDB */ -#ifdef HAVE_BRIDGE_ATTRIBS - .ndo_bridge_setlink = igb_ndo_bridge_setlink, - .ndo_bridge_getlink = igb_ndo_bridge_getlink, -#endif /* HAVE_BRIDGE_ATTRIBS */ -#endif -}; - -#ifdef CONFIG_IGB_VMDQ_NETDEV -static const struct net_device_ops igb_vmdq_ops = { - .ndo_open = &igb_vmdq_open, - .ndo_stop = &igb_vmdq_close, - .ndo_start_xmit = &igb_vmdq_xmit_frame, - .ndo_get_stats = &igb_vmdq_get_stats, - .ndo_set_rx_mode = &igb_vmdq_set_rx_mode, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = &igb_vmdq_set_mac, - .ndo_change_mtu = &igb_vmdq_change_mtu, - .ndo_tx_timeout = &igb_vmdq_tx_timeout, - .ndo_vlan_rx_register = &igb_vmdq_vlan_rx_register, - .ndo_vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid, -}; - -#endif /* CONFIG_IGB_VMDQ_NETDEV */ -#endif /* HAVE_NET_DEVICE_OPS */ -#ifdef CONFIG_IGB_VMDQ_NETDEV -void igb_assign_vmdq_netdev_ops(struct net_device *vnetdev) -{ -#ifdef HAVE_NET_DEVICE_OPS - vnetdev->netdev_ops = &igb_vmdq_ops; -#else - dev->open = &igb_vmdq_open; - dev->stop = &igb_vmdq_close; - dev->hard_start_xmit = &igb_vmdq_xmit_frame; - dev->get_stats = &igb_vmdq_get_stats; -#ifdef HAVE_SET_RX_MODE - dev->set_rx_mode = &igb_vmdq_set_rx_mode; -#endif - dev->set_multicast_list = &igb_vmdq_set_rx_mode; - dev->set_mac_address = &igb_vmdq_set_mac; - dev->change_mtu = &igb_vmdq_change_mtu; -#ifdef HAVE_TX_TIMEOUT - dev->tx_timeout = &igb_vmdq_tx_timeout; -#endif -#if defined(NETIF_F_HW_VLAN_TX) || defined(NETIF_F_HW_VLAN_CTAG_TX) - dev->vlan_rx_register = &igb_vmdq_vlan_rx_register; - dev->vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid; - dev->vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid; -#endif -#endif - igb_vmdq_set_ethtool_ops(vnetdev); - vnetdev->watchdog_timeo = 5 * HZ; - -} - -int igb_init_vmdq_netdevs(struct igb_adapter *adapter) -{ - int pool, err = 0, base_queue; - struct net_device *vnetdev; - struct igb_vmdq_adapter *vmdq_adapter; - - for (pool = 1; pool < adapter->vmdq_pools; pool++) { - int qpp = (!adapter->rss_queues ? 1 : adapter->rss_queues); - base_queue = pool * qpp; - vnetdev = alloc_etherdev(sizeof(struct igb_vmdq_adapter)); - if (!vnetdev) { - err = -ENOMEM; - break; - } - vmdq_adapter = netdev_priv(vnetdev); - vmdq_adapter->vnetdev = vnetdev; - vmdq_adapter->real_adapter = adapter; - vmdq_adapter->rx_ring = adapter->rx_ring[base_queue]; - vmdq_adapter->tx_ring = adapter->tx_ring[base_queue]; - igb_assign_vmdq_netdev_ops(vnetdev); - snprintf(vnetdev->name, IFNAMSIZ, "%sv%d", - adapter->netdev->name, pool); - vnetdev->features = adapter->netdev->features; -#ifdef HAVE_NETDEV_VLAN_FEATURES - vnetdev->vlan_features = adapter->netdev->vlan_features; -#endif - adapter->vmdq_netdev[pool-1] = vnetdev; - err = register_netdev(vnetdev); - if (err) - break; - } - return err; -} - -int igb_remove_vmdq_netdevs(struct igb_adapter *adapter) -{ - int pool, err = 0; - - for (pool = 1; pool < adapter->vmdq_pools; pool++) { - unregister_netdev(adapter->vmdq_netdev[pool-1]); - free_netdev(adapter->vmdq_netdev[pool-1]); - adapter->vmdq_netdev[pool-1] = NULL; - } - return err; -} -#endif /* CONFIG_IGB_VMDQ_NETDEV */ - -/** - * igb_set_fw_version - Configure version string for ethtool - * @adapter: adapter struct - * - **/ -static void igb_set_fw_version(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct e1000_fw_version fw; - - e1000_get_fw_version(hw, &fw); - - switch (hw->mac.type) { - case e1000_i210: - case e1000_i211: - if (!(e1000_get_flash_presence_i210(hw))) { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%2d.%2d-%d", - fw.invm_major, fw.invm_minor, fw.invm_img_type); - break; - } - /* fall through */ - default: - /* if option rom is valid, display its version too*/ - if (fw.or_valid) { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%d.%d, 0x%08x, %d.%d.%d", - fw.eep_major, fw.eep_minor, fw.etrack_id, - fw.or_major, fw.or_build, fw.or_patch); - /* no option rom */ - } else { - if (fw.etrack_id != 0X0000) { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%d.%d, 0x%08x", - fw.eep_major, fw.eep_minor, fw.etrack_id); - } else { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%d.%d.%d", - fw.eep_major, fw.eep_minor, fw.eep_build); - } - } - break; - } - - return; -} - -/** - * igb_init_mas - init Media Autosense feature if enabled in the NVM - * - * @adapter: adapter struct - **/ -static void igb_init_mas(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 eeprom_data; - - e1000_read_nvm(hw, NVM_COMPAT, 1, &eeprom_data); - switch (hw->bus.func) { - case E1000_FUNC_0: - if (eeprom_data & IGB_MAS_ENABLE_0) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - case E1000_FUNC_1: - if (eeprom_data & IGB_MAS_ENABLE_1) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - case E1000_FUNC_2: - if (eeprom_data & IGB_MAS_ENABLE_2) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - case E1000_FUNC_3: - if (eeprom_data & IGB_MAS_ENABLE_3) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - default: - /* Shouldn't get here */ - dev_err(pci_dev_to_dev(adapter->pdev), - "%s:AMS: Invalid port configuration, returning\n", - adapter->netdev->name); - break; - } -} - -/** - * igb_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in igb_pci_tbl - * - * Returns 0 on success, negative on failure - * - * igb_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - **/ -static int __devinit igb_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *netdev; - struct igb_adapter *adapter; - struct e1000_hw *hw; - u16 eeprom_data = 0; - u8 pba_str[E1000_PBANUM_LENGTH]; - s32 ret_val; - static int global_quad_port_a; /* global quad port a indication */ - int i, err, pci_using_dac; - static int cards_found; - - err = pci_enable_device_mem(pdev); - if (err) - return err; - - pci_using_dac = 0; - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; - } else { - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - IGB_ERR("No usable DMA configuration, " - "aborting\n"); - goto err_dma; - } - } - } - -#ifndef HAVE_ASPM_QUIRKS - /* 82575 requires that the pci-e link partner disable the L0s state */ - switch (pdev->device) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); - default: - break; - } - -#endif /* HAVE_ASPM_QUIRKS */ - err = pci_request_selected_regions(pdev, - pci_select_bars(pdev, - IORESOURCE_MEM), - igb_driver_name); - if (err) - goto err_pci_reg; - - pci_enable_pcie_error_reporting(pdev); - - pci_set_master(pdev); - - err = -ENOMEM; -#ifdef HAVE_TX_MQ - netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), - IGB_MAX_TX_QUEUES); -#else - netdev = alloc_etherdev(sizeof(struct igb_adapter)); -#endif /* HAVE_TX_MQ */ - if (!netdev) - goto err_alloc_etherdev; - - SET_MODULE_OWNER(netdev); - SET_NETDEV_DEV(netdev, &pdev->dev); - - pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - hw = &adapter->hw; - hw->back = adapter; - adapter->port_num = hw->bus.func; - adapter->msg_enable = (1 << debug) - 1; - -#ifdef HAVE_PCI_ERS - err = pci_save_state(pdev); - if (err) - goto err_ioremap; -#endif - err = -EIO; - hw->hw_addr = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (!hw->hw_addr) - goto err_ioremap; - -#ifdef HAVE_NET_DEVICE_OPS - netdev->netdev_ops = &igb_netdev_ops; -#else /* HAVE_NET_DEVICE_OPS */ - netdev->open = &igb_open; - netdev->stop = &igb_close; - netdev->get_stats = &igb_get_stats; -#ifdef HAVE_SET_RX_MODE - netdev->set_rx_mode = &igb_set_rx_mode; -#endif - netdev->set_multicast_list = &igb_set_rx_mode; - netdev->set_mac_address = &igb_set_mac; - netdev->change_mtu = &igb_change_mtu; - netdev->do_ioctl = &igb_ioctl; -#ifdef HAVE_TX_TIMEOUT - netdev->tx_timeout = &igb_tx_timeout; -#endif - netdev->vlan_rx_register = igb_vlan_mode; - netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; - netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = igb_netpoll; -#endif - netdev->hard_start_xmit = &igb_xmit_frame; -#endif /* HAVE_NET_DEVICE_OPS */ - igb_set_ethtool_ops(netdev); -#ifdef HAVE_TX_TIMEOUT - netdev->watchdog_timeo = 5 * HZ; -#endif - - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); - - adapter->bd_number = cards_found; - - /* setup the private structure */ - err = igb_sw_init(adapter); - if (err) - goto err_sw_init; - - e1000_get_bus_info(hw); - - hw->phy.autoneg_wait_to_complete = FALSE; - hw->mac.adaptive_ifs = FALSE; - - /* Copper options */ - if (hw->phy.media_type == e1000_media_type_copper) { - hw->phy.mdix = AUTO_ALL_MODES; - hw->phy.disable_polarity_correction = FALSE; - hw->phy.ms_type = e1000_ms_hw_default; - } - - if (e1000_check_reset_block(hw)) - dev_info(pci_dev_to_dev(pdev), - "PHY reset is blocked due to SOL/IDER session.\n"); - - /* - * features is initialized to 0 in allocation, it might have bits - * set by igb_sw_init so we should use an or instead of an - * assignment. - */ - netdev->features |= NETIF_F_SG | - NETIF_F_IP_CSUM | -#ifdef NETIF_F_IPV6_CSUM - NETIF_F_IPV6_CSUM | -#endif -#ifdef NETIF_F_TSO - NETIF_F_TSO | -#ifdef NETIF_F_TSO6 - NETIF_F_TSO6 | -#endif -#endif /* NETIF_F_TSO */ -#ifdef NETIF_F_RXHASH - NETIF_F_RXHASH | -#endif - NETIF_F_RXCSUM | -#ifdef NETIF_F_HW_VLAN_CTAG_RX - NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_CTAG_TX; -#else - NETIF_F_HW_VLAN_RX | - NETIF_F_HW_VLAN_TX; -#endif - - if (hw->mac.type >= e1000_82576) - netdev->features |= NETIF_F_SCTP_CSUM; - -#ifdef HAVE_NDO_SET_FEATURES - /* copy netdev features into list of user selectable features */ - netdev->hw_features |= netdev->features; -#ifndef IGB_NO_LRO - - /* give us the option of enabling LRO later */ - netdev->hw_features |= NETIF_F_LRO; -#endif -#else -#ifdef NETIF_F_GRO - - /* this is only needed on kernels prior to 2.6.39 */ - netdev->features |= NETIF_F_GRO; -#endif -#endif - - /* set this bit last since it cannot be part of hw_features */ -#ifdef NETIF_F_HW_VLAN_CTAG_FILTER - netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; -#else - netdev->features |= NETIF_F_HW_VLAN_FILTER; -#endif - -#ifdef HAVE_NETDEV_VLAN_FEATURES - netdev->vlan_features |= NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | - NETIF_F_SG; - -#endif - if (pci_using_dac) - netdev->features |= NETIF_F_HIGHDMA; - - adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); -#ifdef DEBUG - if (adapter->dmac != IGB_DMAC_DISABLE) - printk("%s: DMA Coalescing is enabled..\n", netdev->name); -#endif - - /* before reading the NVM, reset the controller to put the device in a - * known good starting state */ - e1000_reset_hw(hw); - - /* make sure the NVM is good */ - if (e1000_validate_nvm_checksum(hw) < 0) { - dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" - " Valid\n"); - err = -EIO; - goto err_eeprom; - } - - /* copy the MAC address out of the NVM */ - if (e1000_read_mac_addr(hw)) - dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); - memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); -#ifdef ETHTOOL_GPERMADDR - memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->perm_addr)) { -#else - if (!is_valid_ether_addr(netdev->dev_addr)) { -#endif - dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); - err = -EIO; - goto err_eeprom; - } - - memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); - adapter->mac_table[0].queue = adapter->vfs_allocated_count; - adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); - igb_rar_set(adapter, 0); - - /* get firmware version for ethtool -i */ - igb_set_fw_version(adapter); - - /* Check if Media Autosense is enabled */ - if (hw->mac.type == e1000_82580) - igb_init_mas(adapter); -#ifdef HAVE_TIMER_SETUP - timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); - timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); -#else - setup_timer(&adapter->watchdog_timer, &igb_watchdog, - (unsigned long) adapter); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, - (unsigned long) adapter); - setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, - (unsigned long) adapter); -#endif - - INIT_WORK(&adapter->reset_task, igb_reset_task); - INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); - - /* Initialize link properties that are user-changeable */ - adapter->fc_autoneg = true; - hw->mac.autoneg = true; - hw->phy.autoneg_advertised = 0x2f; - - hw->fc.requested_mode = e1000_fc_default; - hw->fc.current_mode = e1000_fc_default; - - e1000_validate_mdi_setting(hw); - - /* By default, support wake on port A */ - if (hw->bus.func == 0) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* Check the NVM for wake support for non-port A ports */ - if (hw->mac.type >= e1000_82580) - hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &eeprom_data); - else if (hw->bus.func == 1) - e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); - - if (eeprom_data & IGB_EEPROM_APME) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* now that we have the eeprom settings, apply the special cases where - * the eeprom may be wrong or the board simply won't support wake on - * lan on a particular port */ - switch (pdev->device) { - case E1000_DEV_ID_82575GB_QUAD_COPPER: - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - /* Wake events only supported on port A for dual fiber - * regardless of eeprom setting */ - if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - /* if quad port adapter, disable WoL on all but port A */ - if (global_quad_port_a != 0) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - else - adapter->flags |= IGB_FLAG_QUAD_PORT_A; - /* Reset for multiple quad port adapters */ - if (++global_quad_port_a == 4) - global_quad_port_a = 0; - break; - default: - /* If the device can't wake, don't set software support */ - if (!device_can_wakeup(&adapter->pdev->dev)) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - } - - /* initialize the wol settings based on the eeprom settings */ - if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) - adapter->wol |= E1000_WUFC_MAG; - - /* Some vendors want WoL disabled by default, but still supported */ - if ((hw->mac.type == e1000_i350) && - (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - adapter->wol = 0; - } - - device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), - adapter->flags & IGB_FLAG_WOL_SUPPORTED); - - /* reset the hardware with the new settings */ - igb_reset(adapter); - adapter->devrc = 0; - -#ifdef HAVE_I2C_SUPPORT - /* Init the I2C interface */ - err = igb_init_i2c(adapter); - if (err) { - dev_err(&pdev->dev, "failed to init i2c interface\n"); - goto err_eeprom; - } -#endif /* HAVE_I2C_SUPPORT */ - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); - - strncpy(netdev->name, "eth%d", IFNAMSIZ); - err = register_netdev(netdev); - if (err) - goto err_register; - -#ifdef CONFIG_IGB_VMDQ_NETDEV - err = igb_init_vmdq_netdevs(adapter); - if (err) - goto err_register; -#endif - /* carrier off reporting is important to ethtool even BEFORE open */ - netif_carrier_off(netdev); - -#ifdef IGB_DCA - if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { - adapter->flags |= IGB_FLAG_DCA_ENABLED; - dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); - igb_setup_dca(adapter); - } - -#endif -#ifdef HAVE_PTP_1588_CLOCK - /* do hw tstamp init after resetting */ - igb_ptp_init(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - - dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); - /* print bus type/speed/width info */ - dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", - netdev->name, - ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : - (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown"), - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : - (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown")); - dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); - for (i = 0; i < 6; i++) - printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); - - ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); - if (ret_val) - strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); - dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, - pba_str); - - - /* Initialize the thermal sensor on i350 devices. */ - if (hw->mac.type == e1000_i350) { - if (hw->bus.func == 0) { - u16 ets_word; - - /* - * Read the NVM to determine if this i350 device - * supports an external thermal sensor. - */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); - if (ets_word != 0x0000 && ets_word != 0xFFFF) - adapter->ets = true; - else - adapter->ets = false; - } -#ifdef IGB_HWMON - - igb_sysfs_init(adapter); -#else -#ifdef IGB_PROCFS - - igb_procfs_init(adapter); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - } else { - adapter->ets = false; - } - - if (hw->phy.media_type == e1000_media_type_copper) { - switch (hw->mac.type) { - case e1000_i350: - case e1000_i210: - case e1000_i211: - /* Enable EEE for internal copper PHY devices */ - err = e1000_set_eee_i350(hw); - if (!err && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - break; - case e1000_i354: - if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & - (E1000_CTRL_EXT_LINK_MODE_SGMII)) { - err = e1000_set_eee_i354(hw); - if ((!err) && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - } - break; - default: - break; - } - } - - /* send driver version info to firmware */ - if (hw->mac.type >= e1000_i350) - igb_init_fw(adapter); - -#ifndef IGB_NO_LRO - if (netdev->features & NETIF_F_LRO) - dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); - else - dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); -#endif - dev_info(pci_dev_to_dev(pdev), - "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", - adapter->msix_entries ? "MSI-X" : - (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", - adapter->num_rx_queues, adapter->num_tx_queues); - - cards_found++; - - pm_runtime_put_noidle(&pdev->dev); - return 0; - -err_register: - igb_release_hw_control(adapter); -#ifdef HAVE_I2C_SUPPORT - memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); -#endif /* HAVE_I2C_SUPPORT */ -err_eeprom: - if (!e1000_check_reset_block(hw)) - e1000_phy_hw_reset(hw); - - if (hw->flash_address) - iounmap(hw->flash_address); -err_sw_init: - igb_clear_interrupt_scheme(adapter); - igb_reset_sriov_capability(adapter); - iounmap(hw->hw_addr); -err_ioremap: - free_netdev(netdev); -err_alloc_etherdev: - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); -err_pci_reg: -err_dma: - pci_disable_device(pdev); - return err; -} -#ifdef HAVE_I2C_SUPPORT -/* - * igb_remove_i2c - Cleanup I2C interface - * @adapter: pointer to adapter structure - * - */ -static void igb_remove_i2c(struct igb_adapter *adapter) -{ - - /* free the adapter bus structure */ - i2c_del_adapter(&adapter->i2c_adap); -} -#endif /* HAVE_I2C_SUPPORT */ - -/** - * igb_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * igb_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - **/ -static void __devexit igb_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - pm_runtime_get_noresume(&pdev->dev); -#ifdef HAVE_I2C_SUPPORT - igb_remove_i2c(adapter); -#endif /* HAVE_I2C_SUPPORT */ -#ifdef HAVE_PTP_1588_CLOCK - igb_ptp_stop(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - - /* flush_scheduled work may reschedule our watchdog task, so - * explicitly disable watchdog tasks from being rescheduled */ - set_bit(__IGB_DOWN, &adapter->state); - del_timer_sync(&adapter->watchdog_timer); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - del_timer_sync(&adapter->dma_err_timer); - del_timer_sync(&adapter->phy_info_timer); - - flush_scheduled_work(); - -#ifdef IGB_DCA - if (adapter->flags & IGB_FLAG_DCA_ENABLED) { - dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); - dca_remove_requester(&pdev->dev); - adapter->flags &= ~IGB_FLAG_DCA_ENABLED; - E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); - } -#endif - - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - igb_release_hw_control(adapter); - - unregister_netdev(netdev); -#ifdef CONFIG_IGB_VMDQ_NETDEV - igb_remove_vmdq_netdevs(adapter); -#endif - - igb_clear_interrupt_scheme(adapter); - igb_reset_sriov_capability(adapter); - - iounmap(hw->hw_addr); - if (hw->flash_address) - iounmap(hw->flash_address); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); - -#ifdef IGB_HWMON - igb_sysfs_exit(adapter); -#else -#ifdef IGB_PROCFS - igb_procfs_exit(adapter); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - kfree(adapter->mac_table); - kfree(adapter->shadow_vfta); - free_netdev(netdev); - - pci_disable_pcie_error_reporting(pdev); - - pci_disable_device(pdev); -} - -/** - * igb_sw_init - Initialize general software structures (struct igb_adapter) - * @adapter: board private structure to initialize - * - * igb_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - **/ -static int igb_sw_init(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - - /* PCI config space info */ - - hw->vendor_id = pdev->vendor; - hw->device_id = pdev->device; - hw->subsystem_vendor_id = pdev->subsystem_vendor; - hw->subsystem_device_id = pdev->subsystem_device; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); - - pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); - - /* set default ring sizes */ - adapter->tx_ring_count = IGB_DEFAULT_TXD; - adapter->rx_ring_count = IGB_DEFAULT_RXD; - - /* set default work limits */ - adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; - - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + - VLAN_HLEN; - - /* Initialize the hardware-specific values */ - if (e1000_setup_init_funcs(hw, TRUE)) { - dev_err(pci_dev_to_dev(pdev), "Hardware Initialization Failure\n"); - return -EIO; - } - - adapter->mac_table = kzalloc(sizeof(struct igb_mac_addr) * - hw->mac.rar_entry_count, - GFP_ATOMIC); - - /* Setup and initialize a copy of the hw vlan table array */ - adapter->shadow_vfta = kzalloc(sizeof(u32) * E1000_VFTA_ENTRIES, - GFP_ATOMIC); -#ifdef NO_KNI - /* These calls may decrease the number of queues */ - if (hw->mac.type < e1000_i210) { - igb_set_sriov_capability(adapter); - } - - if (igb_init_interrupt_scheme(adapter, true)) { - dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); - return -ENOMEM; - } - - /* Explicitly disable IRQ since the NIC can be in any state. */ - igb_irq_disable(adapter); - - set_bit(__IGB_DOWN, &adapter->state); -#endif - return 0; -} - -/** - * igb_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - **/ -static int __igb_open(struct net_device *netdev, bool resuming) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; -#ifdef CONFIG_PM_RUNTIME - struct pci_dev *pdev = adapter->pdev; -#endif /* CONFIG_PM_RUNTIME */ - int err; - int i; - - /* disallow open during test */ - if (test_bit(__IGB_TESTING, &adapter->state)) { - WARN_ON(resuming); - return -EBUSY; - } - -#ifdef CONFIG_PM_RUNTIME - if (!resuming) - pm_runtime_get_sync(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - netif_carrier_off(netdev); - - /* allocate transmit descriptors */ - err = igb_setup_all_tx_resources(adapter); - if (err) - goto err_setup_tx; - - /* allocate receive descriptors */ - err = igb_setup_all_rx_resources(adapter); - if (err) - goto err_setup_rx; - - igb_power_up_link(adapter); - - /* before we allocate an interrupt, we must be ready to handle it. - * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt - * as soon as we call pci_request_irq, so we have to setup our - * clean_rx handler before we do so. */ - igb_configure(adapter); - - err = igb_request_irq(adapter); - if (err) - goto err_req_irq; - - /* Notify the stack of the actual queue counts. */ - netif_set_real_num_tx_queues(netdev, - adapter->vmdq_pools ? 1 : - adapter->num_tx_queues); - - err = netif_set_real_num_rx_queues(netdev, - adapter->vmdq_pools ? 1 : - adapter->num_rx_queues); - if (err) - goto err_set_queues; - - /* From here on the code is the same as igb_up() */ - clear_bit(__IGB_DOWN, &adapter->state); - - for (i = 0; i < adapter->num_q_vectors; i++) - napi_enable(&(adapter->q_vector[i]->napi)); - igb_configure_lli(adapter); - - /* Clear any pending interrupts. */ - E1000_READ_REG(hw, E1000_ICR); - - igb_irq_enable(adapter); - - /* notify VFs that reset has been completed */ - if (adapter->vfs_allocated_count) { - u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg_data |= E1000_CTRL_EXT_PFRSTD; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); - } - - netif_tx_start_all_queues(netdev); - - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - schedule_work(&adapter->dma_err_task); - - /* start the watchdog. */ - hw->mac.get_link_status = 1; - schedule_work(&adapter->watchdog_task); - - return E1000_SUCCESS; - -err_set_queues: - igb_free_irq(adapter); -err_req_irq: - igb_release_hw_control(adapter); - igb_power_down_link(adapter); - igb_free_all_rx_resources(adapter); -err_setup_rx: - igb_free_all_tx_resources(adapter); -err_setup_tx: - igb_reset(adapter); - -#ifdef CONFIG_PM_RUNTIME - if (!resuming) - pm_runtime_put(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - return err; -} - -static int igb_open(struct net_device *netdev) -{ - return __igb_open(netdev, false); -} - -/** - * igb_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the driver's control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - **/ -static int __igb_close(struct net_device *netdev, bool suspending) -{ - struct igb_adapter *adapter = netdev_priv(netdev); -#ifdef CONFIG_PM_RUNTIME - struct pci_dev *pdev = adapter->pdev; -#endif /* CONFIG_PM_RUNTIME */ - - WARN_ON(test_bit(__IGB_RESETTING, &adapter->state)); - -#ifdef CONFIG_PM_RUNTIME - if (!suspending) - pm_runtime_get_sync(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - igb_down(adapter); - - igb_release_hw_control(adapter); - - igb_free_irq(adapter); - - igb_free_all_tx_resources(adapter); - igb_free_all_rx_resources(adapter); - -#ifdef CONFIG_PM_RUNTIME - if (!suspending) - pm_runtime_put_sync(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - return 0; -} - -static int igb_close(struct net_device *netdev) -{ - return __igb_close(netdev, false); -} - -/** - * igb_setup_tx_resources - allocate Tx resources (Descriptors) - * @tx_ring: tx descriptor ring (for a specific queue) to setup - * - * Return 0 on success, negative on failure - **/ -int igb_setup_tx_resources(struct igb_ring *tx_ring) -{ - struct device *dev = tx_ring->dev; - int size; - - size = sizeof(struct igb_tx_buffer) * tx_ring->count; - tx_ring->tx_buffer_info = vzalloc(size); - if (!tx_ring->tx_buffer_info) - goto err; - - /* round up to nearest 4K */ - tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc); - tx_ring->size = ALIGN(tx_ring->size, 4096); - - tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, - &tx_ring->dma, GFP_KERNEL); - - if (!tx_ring->desc) - goto err; - - tx_ring->next_to_use = 0; - tx_ring->next_to_clean = 0; - - return 0; - -err: - vfree(tx_ring->tx_buffer_info); - dev_err(dev, - "Unable to allocate memory for the transmit descriptor ring\n"); - return -ENOMEM; -} - -/** - * igb_setup_all_tx_resources - wrapper to allocate Tx resources - * (Descriptors) for all queues - * @adapter: board private structure - * - * Return 0 on success, negative on failure - **/ -static int igb_setup_all_tx_resources(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int i, err = 0; - - for (i = 0; i < adapter->num_tx_queues; i++) { - err = igb_setup_tx_resources(adapter->tx_ring[i]); - if (err) { - dev_err(pci_dev_to_dev(pdev), - "Allocation for Tx Queue %u failed\n", i); - for (i--; i >= 0; i--) - igb_free_tx_resources(adapter->tx_ring[i]); - break; - } - } - - return err; -} - -/** - * igb_setup_tctl - configure the transmit control registers - * @adapter: Board private structure - **/ -void igb_setup_tctl(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 tctl; - - /* disable queue 0 which is enabled by default on 82575 and 82576 */ - E1000_WRITE_REG(hw, E1000_TXDCTL(0), 0); - - /* Program the Transmit Control Register */ - tctl = E1000_READ_REG(hw, E1000_TCTL); - tctl &= ~E1000_TCTL_CT; - tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | - (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); - - e1000_config_collision_dist(hw); - - /* Enable transmits */ - tctl |= E1000_TCTL_EN; - - E1000_WRITE_REG(hw, E1000_TCTL, tctl); -} - -static u32 igb_tx_wthresh(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - switch (hw->mac.type) { - case e1000_i354: - return 4; - case e1000_82576: - if (adapter->msix_entries) - return 1; - default: - break; - } - - return 16; -} - -/** - * igb_configure_tx_ring - Configure transmit ring after Reset - * @adapter: board private structure - * @ring: tx ring to configure - * - * Configure a transmit ring after a reset. - **/ -void igb_configure_tx_ring(struct igb_adapter *adapter, - struct igb_ring *ring) -{ - struct e1000_hw *hw = &adapter->hw; - u32 txdctl = 0; - u64 tdba = ring->dma; - int reg_idx = ring->reg_idx; - - /* disable the queue */ - E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), 0); - E1000_WRITE_FLUSH(hw); - mdelay(10); - - E1000_WRITE_REG(hw, E1000_TDLEN(reg_idx), - ring->count * sizeof(union e1000_adv_tx_desc)); - E1000_WRITE_REG(hw, E1000_TDBAL(reg_idx), - tdba & 0x00000000ffffffffULL); - E1000_WRITE_REG(hw, E1000_TDBAH(reg_idx), tdba >> 32); - - ring->tail = hw->hw_addr + E1000_TDT(reg_idx); - E1000_WRITE_REG(hw, E1000_TDH(reg_idx), 0); - writel(0, ring->tail); - - txdctl |= IGB_TX_PTHRESH; - txdctl |= IGB_TX_HTHRESH << 8; - txdctl |= igb_tx_wthresh(adapter) << 16; - - txdctl |= E1000_TXDCTL_QUEUE_ENABLE; - E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), txdctl); -} - -/** - * igb_configure_tx - Configure transmit Unit after Reset - * @adapter: board private structure - * - * Configure the Tx unit of the MAC after a reset. - **/ -static void igb_configure_tx(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_tx_queues; i++) - igb_configure_tx_ring(adapter, adapter->tx_ring[i]); -} - -/** - * igb_setup_rx_resources - allocate Rx resources (Descriptors) - * @rx_ring: rx descriptor ring (for a specific queue) to setup - * - * Returns 0 on success, negative on failure - **/ -int igb_setup_rx_resources(struct igb_ring *rx_ring) -{ - struct device *dev = rx_ring->dev; - int size, desc_len; - - size = sizeof(struct igb_rx_buffer) * rx_ring->count; - rx_ring->rx_buffer_info = vzalloc(size); - if (!rx_ring->rx_buffer_info) - goto err; - - desc_len = sizeof(union e1000_adv_rx_desc); - - /* Round up to nearest 4K */ - rx_ring->size = rx_ring->count * desc_len; - rx_ring->size = ALIGN(rx_ring->size, 4096); - - rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, - &rx_ring->dma, GFP_KERNEL); - - if (!rx_ring->desc) - goto err; - - rx_ring->next_to_alloc = 0; - rx_ring->next_to_clean = 0; - rx_ring->next_to_use = 0; - - return 0; - -err: - vfree(rx_ring->rx_buffer_info); - rx_ring->rx_buffer_info = NULL; - dev_err(dev, "Unable to allocate memory for the receive descriptor" - " ring\n"); - return -ENOMEM; -} - -/** - * igb_setup_all_rx_resources - wrapper to allocate Rx resources - * (Descriptors) for all queues - * @adapter: board private structure - * - * Return 0 on success, negative on failure - **/ -static int igb_setup_all_rx_resources(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int i, err = 0; - - for (i = 0; i < adapter->num_rx_queues; i++) { - err = igb_setup_rx_resources(adapter->rx_ring[i]); - if (err) { - dev_err(pci_dev_to_dev(pdev), - "Allocation for Rx Queue %u failed\n", i); - for (i--; i >= 0; i--) - igb_free_rx_resources(adapter->rx_ring[i]); - break; - } - } - - return err; -} - -/** - * igb_setup_mrqc - configure the multiple receive queue control registers - * @adapter: Board private structure - **/ -static void igb_setup_mrqc(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 mrqc, rxcsum; - u32 j, num_rx_queues, shift = 0, shift2 = 0; - static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741, - 0xB08FA343, 0xCB2BCAD0, 0xB4307BAE, - 0xA32DCB77, 0x0CF23080, 0x3BB7426A, - 0xFA01ACBE }; - - /* Fill out hash function seeds */ - for (j = 0; j < 10; j++) - E1000_WRITE_REG(hw, E1000_RSSRK(j), rsskey[j]); - - num_rx_queues = adapter->rss_queues; - - /* 82575 and 82576 supports 2 RSS queues for VMDq */ - switch (hw->mac.type) { - case e1000_82575: - if (adapter->vmdq_pools) { - shift = 2; - shift2 = 6; - break; - } - shift = 6; - break; - case e1000_82576: - /* 82576 supports 2 RSS queues for SR-IOV */ - if (adapter->vfs_allocated_count || adapter->vmdq_pools) { - shift = 3; - num_rx_queues = 2; - } - break; - default: - break; - } - - /* - * Populate the redirection table 4 entries at a time. To do this - * we are generating the results for n and n+2 and then interleaving - * those with the results with n+1 and n+3. - */ - for (j = 0; j < 32; j++) { - /* first pass generates n and n+2 */ - u32 base = ((j * 0x00040004) + 0x00020000) * num_rx_queues; - u32 reta = (base & 0x07800780) >> (7 - shift); - - /* second pass generates n+1 and n+3 */ - base += 0x00010001 * num_rx_queues; - reta |= (base & 0x07800780) << (1 + shift); - - /* generate 2nd table for 82575 based parts */ - if (shift2) - reta |= (0x01010101 * num_rx_queues) << shift2; - - E1000_WRITE_REG(hw, E1000_RETA(j), reta); - } - - /* - * Disable raw packet checksumming so that RSS hash is placed in - * descriptor on writeback. No need to enable TCP/UDP/IP checksum - * offloads as they are enabled by default - */ - rxcsum = E1000_READ_REG(hw, E1000_RXCSUM); - rxcsum |= E1000_RXCSUM_PCSD; - - if (adapter->hw.mac.type >= e1000_82576) - /* Enable Receive Checksum Offload for SCTP */ - rxcsum |= E1000_RXCSUM_CRCOFL; - - /* Don't need to set TUOFL or IPOFL, they default to 1 */ - E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum); - - /* Generate RSS hash based on packet types, TCP/UDP - * port numbers and/or IPv4/v6 src and dst addresses - */ - mrqc = E1000_MRQC_RSS_FIELD_IPV4 | - E1000_MRQC_RSS_FIELD_IPV4_TCP | - E1000_MRQC_RSS_FIELD_IPV6 | - E1000_MRQC_RSS_FIELD_IPV6_TCP | - E1000_MRQC_RSS_FIELD_IPV6_TCP_EX; - - if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) - mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP; - if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) - mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP; - - /* If VMDq is enabled then we set the appropriate mode for that, else - * we default to RSS so that an RSS hash is calculated per packet even - * if we are only using one queue */ - if (adapter->vfs_allocated_count || adapter->vmdq_pools) { - if (hw->mac.type > e1000_82575) { - /* Set the default pool for the PF's first queue */ - u32 vtctl = E1000_READ_REG(hw, E1000_VT_CTL); - vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK | - E1000_VT_CTL_DISABLE_DEF_POOL); - vtctl |= adapter->vfs_allocated_count << - E1000_VT_CTL_DEFAULT_POOL_SHIFT; - E1000_WRITE_REG(hw, E1000_VT_CTL, vtctl); - } else if (adapter->rss_queues > 1) { - /* set default queue for pool 1 to queue 2 */ - E1000_WRITE_REG(hw, E1000_VT_CTL, - adapter->rss_queues << 7); - } - if (adapter->rss_queues > 1) - mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q; - else - mrqc |= E1000_MRQC_ENABLE_VMDQ; - } else { - mrqc |= E1000_MRQC_ENABLE_RSS_4Q; - } - igb_vmm_control(adapter); - - E1000_WRITE_REG(hw, E1000_MRQC, mrqc); -} - -/** - * igb_setup_rctl - configure the receive control registers - * @adapter: Board private structure - **/ -void igb_setup_rctl(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 rctl; - - rctl = E1000_READ_REG(hw, E1000_RCTL); - - rctl &= ~(3 << E1000_RCTL_MO_SHIFT); - rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); - - rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF | - (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT); - - /* - * enable stripping of CRC. It's unlikely this will break BMC - * redirection as it did with e1000. Newer features require - * that the HW strips the CRC. - */ - rctl |= E1000_RCTL_SECRC; - - /* disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - - /* enable LPE to prevent packets larger than max_frame_size */ - rctl |= E1000_RCTL_LPE; - - /* disable queue 0 to prevent tail write w/o re-config */ - E1000_WRITE_REG(hw, E1000_RXDCTL(0), 0); - - /* Attention!!! For SR-IOV PF driver operations you must enable - * queue drop for all VF and PF queues to prevent head of line blocking - * if an un-trusted VF does not provide descriptors to hardware. - */ - if (adapter->vfs_allocated_count) { - /* set all queue drop enable bits */ - E1000_WRITE_REG(hw, E1000_QDE, ALL_QUEUES); - } - - E1000_WRITE_REG(hw, E1000_RCTL, rctl); -} - -static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, - int vfn) -{ - struct e1000_hw *hw = &adapter->hw; - u32 vmolr; - - /* if it isn't the PF check to see if VFs are enabled and - * increase the size to support vlan tags */ - if (vfn < adapter->vfs_allocated_count && - adapter->vf_data[vfn].vlans_enabled) - size += VLAN_HLEN; - -#ifdef CONFIG_IGB_VMDQ_NETDEV - if (vfn >= adapter->vfs_allocated_count) { - int queue = vfn - adapter->vfs_allocated_count; - struct igb_vmdq_adapter *vadapter; - - vadapter = netdev_priv(adapter->vmdq_netdev[queue-1]); - if (vadapter->vlgrp) - size += VLAN_HLEN; - } -#endif - vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); - vmolr &= ~E1000_VMOLR_RLPML_MASK; - vmolr |= size | E1000_VMOLR_LPE; - E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); - - return 0; -} - -/** - * igb_rlpml_set - set maximum receive packet size - * @adapter: board private structure - * - * Configure maximum receivable packet size. - **/ -static void igb_rlpml_set(struct igb_adapter *adapter) -{ - u32 max_frame_size = adapter->max_frame_size; - struct e1000_hw *hw = &adapter->hw; - u16 pf_id = adapter->vfs_allocated_count; - - if (adapter->vmdq_pools && hw->mac.type != e1000_82575) { - int i; - for (i = 0; i < adapter->vmdq_pools; i++) - igb_set_vf_rlpml(adapter, max_frame_size, pf_id + i); - /* - * If we're in VMDQ or SR-IOV mode, then set global RLPML - * to our max jumbo frame size, in case we need to enable - * jumbo frames on one of the rings later. - * This will not pass over-length frames into the default - * queue because it's gated by the VMOLR.RLPML. - */ - max_frame_size = MAX_JUMBO_FRAME_SIZE; - } - /* Set VF RLPML for the PF device. */ - if (adapter->vfs_allocated_count) - igb_set_vf_rlpml(adapter, max_frame_size, pf_id); - - E1000_WRITE_REG(hw, E1000_RLPML, max_frame_size); -} - -static inline void igb_set_vf_vlan_strip(struct igb_adapter *adapter, - int vfn, bool enable) -{ - struct e1000_hw *hw = &adapter->hw; - u32 val; - void __iomem *reg; - - if (hw->mac.type < e1000_82576) - return; - - if (hw->mac.type == e1000_i350) - reg = hw->hw_addr + E1000_DVMOLR(vfn); - else - reg = hw->hw_addr + E1000_VMOLR(vfn); - - val = readl(reg); - if (enable) - val |= E1000_VMOLR_STRVLAN; - else - val &= ~(E1000_VMOLR_STRVLAN); - writel(val, reg); -} -static inline void igb_set_vmolr(struct igb_adapter *adapter, - int vfn, bool aupe) -{ - struct e1000_hw *hw = &adapter->hw; - u32 vmolr; - - /* - * This register exists only on 82576 and newer so if we are older then - * we should exit and do nothing - */ - if (hw->mac.type < e1000_82576) - return; - - vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); - - if (aupe) - vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */ - else - vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */ - - /* clear all bits that might not be set */ - vmolr &= ~E1000_VMOLR_RSSE; - - if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count) - vmolr |= E1000_VMOLR_RSSE; /* enable RSS */ - - vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */ - vmolr |= E1000_VMOLR_LPE; /* Accept long packets */ - - E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); -} - -/** - * igb_configure_rx_ring - Configure a receive ring after Reset - * @adapter: board private structure - * @ring: receive ring to be configured - * - * Configure the Rx unit of the MAC after a reset. - **/ -void igb_configure_rx_ring(struct igb_adapter *adapter, - struct igb_ring *ring) -{ - struct e1000_hw *hw = &adapter->hw; - u64 rdba = ring->dma; - int reg_idx = ring->reg_idx; - u32 srrctl = 0, rxdctl = 0; - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* - * RLPML prevents us from receiving a frame larger than max_frame so - * it is safe to just set the rx_buffer_len to max_frame without the - * risk of an skb over panic. - */ - ring->rx_buffer_len = max_t(u32, adapter->max_frame_size, - MAXIMUM_ETHERNET_VLAN_SIZE); - -#endif - /* disable the queue */ - E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), 0); - - /* Set DMA base address registers */ - E1000_WRITE_REG(hw, E1000_RDBAL(reg_idx), - rdba & 0x00000000ffffffffULL); - E1000_WRITE_REG(hw, E1000_RDBAH(reg_idx), rdba >> 32); - E1000_WRITE_REG(hw, E1000_RDLEN(reg_idx), - ring->count * sizeof(union e1000_adv_rx_desc)); - - /* initialize head and tail */ - ring->tail = hw->hw_addr + E1000_RDT(reg_idx); - E1000_WRITE_REG(hw, E1000_RDH(reg_idx), 0); - writel(0, ring->tail); - - /* reset next-to- use/clean to place SW in sync with hardwdare */ - ring->next_to_clean = 0; - ring->next_to_use = 0; -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - ring->next_to_alloc = 0; - -#endif - /* set descriptor configuration */ -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; - srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT; -#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - srrctl = ALIGN(ring->rx_buffer_len, 1024) >> - E1000_SRRCTL_BSIZEPKT_SHIFT; -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; -#ifdef HAVE_PTP_1588_CLOCK - if (hw->mac.type >= e1000_82580) - srrctl |= E1000_SRRCTL_TIMESTAMP; -#endif /* HAVE_PTP_1588_CLOCK */ - /* - * We should set the drop enable bit if: - * SR-IOV is enabled - * or - * Flow Control is disabled and number of RX queues > 1 - * - * This allows us to avoid head of line blocking for security - * and performance reasons. - */ - if (adapter->vfs_allocated_count || - (adapter->num_rx_queues > 1 && - (hw->fc.requested_mode == e1000_fc_none || - hw->fc.requested_mode == e1000_fc_rx_pause))) - srrctl |= E1000_SRRCTL_DROP_EN; - - E1000_WRITE_REG(hw, E1000_SRRCTL(reg_idx), srrctl); - - /* set filtering for VMDQ pools */ - igb_set_vmolr(adapter, reg_idx & 0x7, true); - - rxdctl |= IGB_RX_PTHRESH; - rxdctl |= IGB_RX_HTHRESH << 8; - rxdctl |= IGB_RX_WTHRESH << 16; - - /* enable receive descriptor fetching */ - rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; - E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), rxdctl); -} - -/** - * igb_configure_rx - Configure receive Unit after Reset - * @adapter: board private structure - * - * Configure the Rx unit of the MAC after a reset. - **/ -static void igb_configure_rx(struct igb_adapter *adapter) -{ - int i; - - /* set UTA to appropriate mode */ - igb_set_uta(adapter); - - igb_full_sync_mac_table(adapter); - /* Setup the HW Rx Head and Tail Descriptor Pointers and - * the Base and Length of the Rx Descriptor Ring */ - for (i = 0; i < adapter->num_rx_queues; i++) - igb_configure_rx_ring(adapter, adapter->rx_ring[i]); -} - -/** - * igb_free_tx_resources - Free Tx Resources per Queue - * @tx_ring: Tx descriptor ring for a specific queue - * - * Free all transmit software resources - **/ -void igb_free_tx_resources(struct igb_ring *tx_ring) -{ - igb_clean_tx_ring(tx_ring); - - vfree(tx_ring->tx_buffer_info); - tx_ring->tx_buffer_info = NULL; - - /* if not set, then don't free */ - if (!tx_ring->desc) - return; - - dma_free_coherent(tx_ring->dev, tx_ring->size, - tx_ring->desc, tx_ring->dma); - - tx_ring->desc = NULL; -} - -/** - * igb_free_all_tx_resources - Free Tx Resources for All Queues - * @adapter: board private structure - * - * Free all transmit software resources - **/ -static void igb_free_all_tx_resources(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_tx_queues; i++) - igb_free_tx_resources(adapter->tx_ring[i]); -} - -void igb_unmap_and_free_tx_resource(struct igb_ring *ring, - struct igb_tx_buffer *tx_buffer) -{ - if (tx_buffer->skb) { - dev_kfree_skb_any(tx_buffer->skb); - if (dma_unmap_len(tx_buffer, len)) - dma_unmap_single(ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - } else if (dma_unmap_len(tx_buffer, len)) { - dma_unmap_page(ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - } - tx_buffer->next_to_watch = NULL; - tx_buffer->skb = NULL; - dma_unmap_len_set(tx_buffer, len, 0); - /* buffer_info must be completely set up in the transmit path */ -} - -/** - * igb_clean_tx_ring - Free Tx Buffers - * @tx_ring: ring to be cleaned - **/ -static void igb_clean_tx_ring(struct igb_ring *tx_ring) -{ - struct igb_tx_buffer *buffer_info; - unsigned long size; - u16 i; - - if (!tx_ring->tx_buffer_info) - return; - /* Free all the Tx ring sk_buffs */ - - for (i = 0; i < tx_ring->count; i++) { - buffer_info = &tx_ring->tx_buffer_info[i]; - igb_unmap_and_free_tx_resource(tx_ring, buffer_info); - } - - netdev_tx_reset_queue(txring_txq(tx_ring)); - - size = sizeof(struct igb_tx_buffer) * tx_ring->count; - memset(tx_ring->tx_buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(tx_ring->desc, 0, tx_ring->size); - - tx_ring->next_to_use = 0; - tx_ring->next_to_clean = 0; -} - -/** - * igb_clean_all_tx_rings - Free Tx Buffers for all queues - * @adapter: board private structure - **/ -static void igb_clean_all_tx_rings(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_tx_queues; i++) - igb_clean_tx_ring(adapter->tx_ring[i]); -} - -/** - * igb_free_rx_resources - Free Rx Resources - * @rx_ring: ring to clean the resources from - * - * Free all receive software resources - **/ -void igb_free_rx_resources(struct igb_ring *rx_ring) -{ - igb_clean_rx_ring(rx_ring); - - vfree(rx_ring->rx_buffer_info); - rx_ring->rx_buffer_info = NULL; - - /* if not set, then don't free */ - if (!rx_ring->desc) - return; - - dma_free_coherent(rx_ring->dev, rx_ring->size, - rx_ring->desc, rx_ring->dma); - - rx_ring->desc = NULL; -} - -/** - * igb_free_all_rx_resources - Free Rx Resources for All Queues - * @adapter: board private structure - * - * Free all receive software resources - **/ -static void igb_free_all_rx_resources(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_rx_queues; i++) - igb_free_rx_resources(adapter->rx_ring[i]); -} - -/** - * igb_clean_rx_ring - Free Rx Buffers per Queue - * @rx_ring: ring to free buffers from - **/ -void igb_clean_rx_ring(struct igb_ring *rx_ring) -{ - unsigned long size; - u16 i; - - if (!rx_ring->rx_buffer_info) - return; - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - if (rx_ring->skb) - dev_kfree_skb(rx_ring->skb); - rx_ring->skb = NULL; - -#endif - /* Free all the Rx ring sk_buffs */ - for (i = 0; i < rx_ring->count; i++) { - struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i]; -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - if (buffer_info->dma) { - dma_unmap_single(rx_ring->dev, - buffer_info->dma, - rx_ring->rx_buffer_len, - DMA_FROM_DEVICE); - buffer_info->dma = 0; - } - - if (buffer_info->skb) { - dev_kfree_skb(buffer_info->skb); - buffer_info->skb = NULL; - } -#else - if (!buffer_info->page) - continue; - - dma_unmap_page(rx_ring->dev, - buffer_info->dma, - PAGE_SIZE, - DMA_FROM_DEVICE); - __free_page(buffer_info->page); - - buffer_info->page = NULL; -#endif - } - - size = sizeof(struct igb_rx_buffer) * rx_ring->count; - memset(rx_ring->rx_buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(rx_ring->desc, 0, rx_ring->size); - - rx_ring->next_to_alloc = 0; - rx_ring->next_to_clean = 0; - rx_ring->next_to_use = 0; -} - -/** - * igb_clean_all_rx_rings - Free Rx Buffers for all queues - * @adapter: board private structure - **/ -static void igb_clean_all_rx_rings(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_rx_queues; i++) - igb_clean_rx_ring(adapter->rx_ring[i]); -} - -/** - * igb_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure - * - * Returns 0 on success, negative on failure - **/ -static int igb_set_mac(struct net_device *netdev, void *p) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct sockaddr *addr = p; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - igb_del_mac_filter(adapter, hw->mac.addr, - adapter->vfs_allocated_count); - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); - - /* set the correct pool for the new PF MAC address in entry 0 */ - return igb_add_mac_filter(adapter, hw->mac.addr, - adapter->vfs_allocated_count); -} - -/** - * igb_write_mc_addr_list - write multicast addresses to MTA - * @netdev: network interface device structure - * - * Writes multicast address list to the MTA hash table. - * Returns: -ENOMEM on failure - * 0 on no addresses written - * X on writing X addresses to MTA - **/ -int igb_write_mc_addr_list(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; -#ifdef NETDEV_HW_ADDR_T_MULTICAST - struct netdev_hw_addr *ha; -#else - struct dev_mc_list *ha; -#endif - u8 *mta_list; - int i, count; -#ifdef CONFIG_IGB_VMDQ_NETDEV - int vm; -#endif - count = netdev_mc_count(netdev); -#ifdef CONFIG_IGB_VMDQ_NETDEV - for (vm = 1; vm < adapter->vmdq_pools; vm++) { - if (!adapter->vmdq_netdev[vm]) - break; - if (!netif_running(adapter->vmdq_netdev[vm])) - continue; - count += netdev_mc_count(adapter->vmdq_netdev[vm]); - } -#endif - - if (!count) { - e1000_update_mc_addr_list(hw, NULL, 0); - return 0; - } - mta_list = kzalloc(count * 6, GFP_ATOMIC); - if (!mta_list) - return -ENOMEM; - - /* The shared function expects a packed array of only addresses. */ - i = 0; - netdev_for_each_mc_addr(ha, netdev) -#ifdef NETDEV_HW_ADDR_T_MULTICAST - memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); -#else - memcpy(mta_list + (i++ * ETH_ALEN), ha->dmi_addr, ETH_ALEN); -#endif -#ifdef CONFIG_IGB_VMDQ_NETDEV - for (vm = 1; vm < adapter->vmdq_pools; vm++) { - if (!adapter->vmdq_netdev[vm]) - break; - if (!netif_running(adapter->vmdq_netdev[vm]) || - !netdev_mc_count(adapter->vmdq_netdev[vm])) - continue; - netdev_for_each_mc_addr(ha, adapter->vmdq_netdev[vm]) -#ifdef NETDEV_HW_ADDR_T_MULTICAST - memcpy(mta_list + (i++ * ETH_ALEN), - ha->addr, ETH_ALEN); -#else - memcpy(mta_list + (i++ * ETH_ALEN), - ha->dmi_addr, ETH_ALEN); -#endif - } -#endif - e1000_update_mc_addr_list(hw, mta_list, i); - kfree(mta_list); - - return count; -} - -void igb_rar_set(struct igb_adapter *adapter, u32 index) -{ - u32 rar_low, rar_high; - struct e1000_hw *hw = &adapter->hw; - u8 *addr = adapter->mac_table[index].addr; - /* HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); - rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); - - /* Indicate to hardware the Address is Valid. */ - if (adapter->mac_table[index].state & IGB_MAC_STATE_IN_USE) - rar_high |= E1000_RAH_AV; - - if (hw->mac.type == e1000_82575) - rar_high |= E1000_RAH_POOL_1 * adapter->mac_table[index].queue; - else - rar_high |= E1000_RAH_POOL_1 << adapter->mac_table[index].queue; - - E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); - E1000_WRITE_FLUSH(hw); - E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); - E1000_WRITE_FLUSH(hw); -} - -void igb_full_sync_mac_table(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - for (i = 0; i < hw->mac.rar_entry_count; i++) { - igb_rar_set(adapter, i); - } -} - -void igb_sync_mac_table(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (adapter->mac_table[i].state & IGB_MAC_STATE_MODIFIED) - igb_rar_set(adapter, i); - adapter->mac_table[i].state &= ~(IGB_MAC_STATE_MODIFIED); - } -} - -int igb_available_rars(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i, count = 0; - - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (adapter->mac_table[i].state == 0) - count++; - } - return count; -} - -#ifdef HAVE_SET_RX_MODE -/** - * igb_write_uc_addr_list - write unicast addresses to RAR table - * @netdev: network interface device structure - * - * Writes unicast address list to the RAR table. - * Returns: -ENOMEM on failure/insufficient address space - * 0 on no addresses written - * X on writing X addresses to the RAR table - **/ -static int igb_write_uc_addr_list(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - unsigned int vfn = adapter->vfs_allocated_count; - int count = 0; - - /* return ENOMEM indicating insufficient memory for addresses */ - if (netdev_uc_count(netdev) > igb_available_rars(adapter)) - return -ENOMEM; - if (!netdev_uc_empty(netdev)) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - struct netdev_hw_addr *ha; -#else - struct dev_mc_list *ha; -#endif - netdev_for_each_uc_addr(ha, netdev) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - igb_del_mac_filter(adapter, ha->addr, vfn); - igb_add_mac_filter(adapter, ha->addr, vfn); -#else - igb_del_mac_filter(adapter, ha->da_addr, vfn); - igb_add_mac_filter(adapter, ha->da_addr, vfn); -#endif - count++; - } - } - return count; -} - -#endif /* HAVE_SET_RX_MODE */ -/** - * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set - * @netdev: network interface device structure - * - * The set_rx_mode entry point is called whenever the unicast or multicast - * address lists or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper unicast, multicast, - * promiscuous mode, and all-multi behavior. - **/ -static void igb_set_rx_mode(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - unsigned int vfn = adapter->vfs_allocated_count; - u32 rctl, vmolr = 0; - int count; - - /* Check for Promiscuous and All Multicast modes */ - rctl = E1000_READ_REG(hw, E1000_RCTL); - - /* clear the effected bits */ - rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE); - - if (netdev->flags & IFF_PROMISC) { - rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); - vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME); - /* retain VLAN HW filtering if in VT mode */ - if (adapter->vfs_allocated_count || adapter->vmdq_pools) - rctl |= E1000_RCTL_VFE; - } else { - if (netdev->flags & IFF_ALLMULTI) { - rctl |= E1000_RCTL_MPE; - vmolr |= E1000_VMOLR_MPME; - } else { - /* - * Write addresses to the MTA, if the attempt fails - * then we should just turn on promiscuous mode so - * that we can at least receive multicast traffic - */ - count = igb_write_mc_addr_list(netdev); - if (count < 0) { - rctl |= E1000_RCTL_MPE; - vmolr |= E1000_VMOLR_MPME; - } else if (count) { - vmolr |= E1000_VMOLR_ROMPE; - } - } -#ifdef HAVE_SET_RX_MODE - /* - * Write addresses to available RAR registers, if there is not - * sufficient space to store all the addresses then enable - * unicast promiscuous mode - */ - count = igb_write_uc_addr_list(netdev); - if (count < 0) { - rctl |= E1000_RCTL_UPE; - vmolr |= E1000_VMOLR_ROPE; - } -#endif /* HAVE_SET_RX_MODE */ - rctl |= E1000_RCTL_VFE; - } - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - - /* - * In order to support SR-IOV and eventually VMDq it is necessary to set - * the VMOLR to enable the appropriate modes. Without this workaround - * we will have issues with VLAN tag stripping not being done for frames - * that are only arriving because we are the default pool - */ - if (hw->mac.type < e1000_82576) - return; - - vmolr |= E1000_READ_REG(hw, E1000_VMOLR(vfn)) & - ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE); - E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); - igb_restore_vf_multicasts(adapter); -} - -static void igb_check_wvbr(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 wvbr = 0; - - switch (hw->mac.type) { - case e1000_82576: - case e1000_i350: - if (!(wvbr = E1000_READ_REG(hw, E1000_WVBR))) - return; - break; - default: - break; - } - - adapter->wvbr |= wvbr; -} - -#define IGB_STAGGERED_QUEUE_OFFSET 8 - -static void igb_spoof_check(struct igb_adapter *adapter) -{ - int j; - - if (!adapter->wvbr) - return; - - switch (adapter->hw.mac.type) { - case e1000_82576: - for (j = 0; j < adapter->vfs_allocated_count; j++) { - if (adapter->wvbr & (1 << j) || - adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) { - DPRINTK(DRV, WARNING, - "Spoof event(s) detected on VF %d\n", j); - adapter->wvbr &= - ~((1 << j) | - (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))); - } - } - break; - case e1000_i350: - for (j = 0; j < adapter->vfs_allocated_count; j++) { - if (adapter->wvbr & (1 << j)) { - DPRINTK(DRV, WARNING, - "Spoof event(s) detected on VF %d\n", j); - adapter->wvbr &= ~(1 << j); - } - } - break; - default: - break; - } -} - -/* Need to wait a few seconds after link up to get diagnostic information from - * the phy */ -#ifdef HAVE_TIMER_SETUP -static void igb_update_phy_info(struct timer_list *t) -{ - struct igb_adapter *adapter = from_timer(adapter, t, phy_info_timer); -#else -static void igb_update_phy_info(unsigned long data) -{ - struct igb_adapter *adapter = (struct igb_adapter *) data; -#endif - e1000_get_phy_info(&adapter->hw); -} - -/** - * igb_has_link - check shared code for link and determine up/down - * @adapter: pointer to driver private info - **/ -bool igb_has_link(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - bool link_active = FALSE; - - /* get_link_status is set on LSC (link status) interrupt or - * rx sequence error interrupt. get_link_status will stay - * false until the e1000_check_for_link establishes link - * for copper adapters ONLY - */ - switch (hw->phy.media_type) { - case e1000_media_type_copper: - if (!hw->mac.get_link_status) - return true; - case e1000_media_type_internal_serdes: - e1000_check_for_link(hw); - link_active = !hw->mac.get_link_status; - break; - case e1000_media_type_unknown: - default: - break; - } - - if (((hw->mac.type == e1000_i210) || - (hw->mac.type == e1000_i211)) && - (hw->phy.id == I210_I_PHY_ID)) { - if (!netif_carrier_ok(adapter->netdev)) { - adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; - } else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) { - adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE; - adapter->link_check_timeout = jiffies; - } - } - - return link_active; -} - -/** - * igb_watchdog - Timer Call-back - * @data: pointer to adapter cast into an unsigned long - **/ -#ifdef HAVE_TIMER_SETUP -static void igb_watchdog(struct timer_list *t) -{ - struct igb_adapter *adapter = from_timer(adapter, t, watchdog_timer); -#else -static void igb_watchdog(unsigned long data) -{ - struct igb_adapter *adapter = (struct igb_adapter *)data; -#endif - /* Do the rest outside of interrupt context */ - schedule_work(&adapter->watchdog_task); -} - -static void igb_watchdog_task(struct work_struct *work) -{ - struct igb_adapter *adapter = container_of(work, - struct igb_adapter, - watchdog_task); - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 link; - int i; - u32 thstat, ctrl_ext; - u32 connsw; - - link = igb_has_link(adapter); - /* Force link down if we have fiber to swap to */ - if (adapter->flags & IGB_FLAG_MAS_ENABLE) { - if (hw->phy.media_type == e1000_media_type_copper) { - connsw = E1000_READ_REG(hw, E1000_CONNSW); - if (!(connsw & E1000_CONNSW_AUTOSENSE_EN)) - link = 0; - } - } - - if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) { - if (time_after(jiffies, (adapter->link_check_timeout + HZ))) - adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; - else - link = FALSE; - } - - if (link) { - /* Perform a reset if the media type changed. */ - if (hw->dev_spec._82575.media_changed) { - hw->dev_spec._82575.media_changed = false; - adapter->flags |= IGB_FLAG_MEDIA_RESET; - igb_reset(adapter); - } - - /* Cancel scheduled suspend requests. */ - pm_runtime_resume(netdev->dev.parent); - - if (!netif_carrier_ok(netdev)) { - u32 ctrl; - e1000_get_speed_and_duplex(hw, - &adapter->link_speed, - &adapter->link_duplex); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - /* Links status message must follow this format */ - printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, " - "Flow Control: %s\n", - netdev->name, - adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? - "Full Duplex" : "Half Duplex", - ((ctrl & E1000_CTRL_TFCE) && - (ctrl & E1000_CTRL_RFCE)) ? "RX/TX": - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None"))); - /* adjust timeout factor according to speed/duplex */ - adapter->tx_timeout_factor = 1; - switch (adapter->link_speed) { - case SPEED_10: - adapter->tx_timeout_factor = 14; - break; - case SPEED_100: - /* maybe add some timeout factor ? */ - break; - default: - break; - } - - netif_carrier_on(netdev); - netif_tx_wake_all_queues(netdev); - - igb_ping_all_vfs(adapter); -#ifdef IFLA_VF_MAX - igb_check_vf_rate_limit(adapter); -#endif /* IFLA_VF_MAX */ - - /* link state has changed, schedule phy info update */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->phy_info_timer, - round_jiffies(jiffies + 2 * HZ)); - } - } else { - if (netif_carrier_ok(netdev)) { - adapter->link_speed = 0; - adapter->link_duplex = 0; - /* check for thermal sensor event on i350 */ - if (hw->mac.type == e1000_i350) { - thstat = E1000_READ_REG(hw, E1000_THSTAT); - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - if ((hw->phy.media_type == - e1000_media_type_copper) && - !(ctrl_ext & - E1000_CTRL_EXT_LINK_MODE_SGMII)) { - if (thstat & E1000_THSTAT_PWR_DOWN) { - printk(KERN_ERR "igb: %s The " - "network adapter was stopped " - "because it overheated.\n", - netdev->name); - } - if (thstat & E1000_THSTAT_LINK_THROTTLE) { - printk(KERN_INFO - "igb: %s The network " - "adapter supported " - "link speed " - "was downshifted " - "because it " - "overheated.\n", - netdev->name); - } - } - } - - /* Links status message must follow this format */ - printk(KERN_INFO "igb: %s NIC Link is Down\n", - netdev->name); - netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); - - igb_ping_all_vfs(adapter); - - /* link state has changed, schedule phy info update */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->phy_info_timer, - round_jiffies(jiffies + 2 * HZ)); - /* link is down, time to check for alternate media */ - if (adapter->flags & IGB_FLAG_MAS_ENABLE) { - igb_check_swap_media(adapter); - if (adapter->flags & IGB_FLAG_MEDIA_RESET) { - schedule_work(&adapter->reset_task); - /* return immediately */ - return; - } - } - pm_schedule_suspend(netdev->dev.parent, - MSEC_PER_SEC * 5); - - /* also check for alternate media here */ - } else if (!netif_carrier_ok(netdev) && - (adapter->flags & IGB_FLAG_MAS_ENABLE)) { - hw->mac.ops.power_up_serdes(hw); - igb_check_swap_media(adapter); - if (adapter->flags & IGB_FLAG_MEDIA_RESET) { - schedule_work(&adapter->reset_task); - /* return immediately */ - return; - } - } - } - - igb_update_stats(adapter); - - for (i = 0; i < adapter->num_tx_queues; i++) { - struct igb_ring *tx_ring = adapter->tx_ring[i]; - if (!netif_carrier_ok(netdev)) { - /* We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ - if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) { - adapter->tx_timeout_count++; - schedule_work(&adapter->reset_task); - /* return immediately since reset is imminent */ - return; - } - } - - /* Force detection of hung controller every watchdog period */ - set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); - } - - /* Cause software interrupt to ensure rx ring is cleaned */ - if (adapter->msix_entries) { - u32 eics = 0; - for (i = 0; i < adapter->num_q_vectors; i++) - eics |= adapter->q_vector[i]->eims_value; - E1000_WRITE_REG(hw, E1000_EICS, eics); - } else { - E1000_WRITE_REG(hw, E1000_ICS, E1000_ICS_RXDMT0); - } - - igb_spoof_check(adapter); - - /* Reset the timer */ - if (!test_bit(__IGB_DOWN, &adapter->state)) { - if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) - mod_timer(&adapter->watchdog_timer, - round_jiffies(jiffies + HZ)); - else - mod_timer(&adapter->watchdog_timer, - round_jiffies(jiffies + 2 * HZ)); - } -} - -static void igb_dma_err_task(struct work_struct *work) -{ - struct igb_adapter *adapter = container_of(work, - struct igb_adapter, - dma_err_task); - int vf; - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 hgptc; - u32 ciaa, ciad; - - hgptc = E1000_READ_REG(hw, E1000_HGPTC); - if (hgptc) /* If incrementing then no need for the check below */ - goto dma_timer_reset; - /* - * Check to see if a bad DMA write target from an errant or - * malicious VF has caused a PCIe error. If so then we can - * issue a VFLR to the offending VF(s) and then resume without - * requesting a full slot reset. - */ - - for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { - ciaa = (vf << 16) | 0x80000000; - /* 32 bit read so align, we really want status at offset 6 */ - ciaa |= PCI_COMMAND; - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - ciad = E1000_READ_REG(hw, E1000_CIAD); - ciaa &= 0x7FFFFFFF; - /* disable debug mode asap after reading data */ - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - /* Get the upper 16 bits which will be the PCI status reg */ - ciad >>= 16; - if (ciad & (PCI_STATUS_REC_MASTER_ABORT | - PCI_STATUS_REC_TARGET_ABORT | - PCI_STATUS_SIG_SYSTEM_ERROR)) { - netdev_err(netdev, "VF %d suffered error\n", vf); - /* Issue VFLR */ - ciaa = (vf << 16) | 0x80000000; - ciaa |= 0xA8; - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - ciad = 0x00008000; /* VFLR */ - E1000_WRITE_REG(hw, E1000_CIAD, ciad); - ciaa &= 0x7FFFFFFF; - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - } - } -dma_timer_reset: - /* Reset the timer */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->dma_err_timer, - round_jiffies(jiffies + HZ / 10)); -} - -/** - * igb_dma_err_timer - Timer Call-back - * @data: pointer to adapter cast into an unsigned long - **/ -#ifdef HAVE_TIMER_SETUP -static void igb_dma_err_timer(struct timer_list *t) -{ - struct igb_adapter *adapter = from_timer(adapter, t, dma_err_timer); -#else -static void igb_dma_err_timer(unsigned long data) -{ - struct igb_adapter *adapter = (struct igb_adapter *)data; -#endif - /* Do the rest outside of interrupt context */ - schedule_work(&adapter->dma_err_task); -} - -enum latency_range { - lowest_latency = 0, - low_latency = 1, - bulk_latency = 2, - latency_invalid = 255 -}; - -/** - * igb_update_ring_itr - update the dynamic ITR value based on packet size - * - * Stores a new ITR value based on strictly on packet size. This - * algorithm is less sophisticated than that used in igb_update_itr, - * due to the difficulty of synchronizing statistics across multiple - * receive rings. The divisors and thresholds used by this function - * were determined based on theoretical maximum wire speed and testing - * data, in order to minimize response time while increasing bulk - * throughput. - * This functionality is controlled by the InterruptThrottleRate module - * parameter (see igb_param.c) - * NOTE: This function is called only when operating in a multiqueue - * receive environment. - * @q_vector: pointer to q_vector - **/ -static void igb_update_ring_itr(struct igb_q_vector *q_vector) -{ - int new_val = q_vector->itr_val; - int avg_wire_size = 0; - struct igb_adapter *adapter = q_vector->adapter; - unsigned int packets; - - /* For non-gigabit speeds, just fix the interrupt rate at 4000 - * ints/sec - ITR timer value of 120 ticks. - */ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - new_val = IGB_4K_ITR; - goto set_itr_val; - default: - break; - } - - packets = q_vector->rx.total_packets; - if (packets) - avg_wire_size = q_vector->rx.total_bytes / packets; - - packets = q_vector->tx.total_packets; - if (packets) - avg_wire_size = max_t(u32, avg_wire_size, - q_vector->tx.total_bytes / packets); - - /* if avg_wire_size isn't set no work was done */ - if (!avg_wire_size) - goto clear_counts; - - /* Add 24 bytes to size to account for CRC, preamble, and gap */ - avg_wire_size += 24; - - /* Don't starve jumbo frames */ - avg_wire_size = min(avg_wire_size, 3000); - - /* Give a little boost to mid-size frames */ - if ((avg_wire_size > 300) && (avg_wire_size < 1200)) - new_val = avg_wire_size / 3; - else - new_val = avg_wire_size / 2; - - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (new_val < IGB_20K_ITR && - ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || - (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) - new_val = IGB_20K_ITR; - -set_itr_val: - if (new_val != q_vector->itr_val) { - q_vector->itr_val = new_val; - q_vector->set_itr = 1; - } -clear_counts: - q_vector->rx.total_bytes = 0; - q_vector->rx.total_packets = 0; - q_vector->tx.total_bytes = 0; - q_vector->tx.total_packets = 0; -} - -/** - * igb_update_itr - update the dynamic ITR value based on statistics - * Stores a new ITR value based on packets and byte - * counts during the last interrupt. The advantage of per interrupt - * computation is faster updates and more accurate ITR for the current - * traffic pattern. Constants in this function were computed - * based on theoretical maximum wire speed and thresholds were set based - * on testing data as well as attempting to minimize response time - * while increasing bulk throughput. - * this functionality is controlled by the InterruptThrottleRate module - * parameter (see igb_param.c) - * NOTE: These calculations are only valid when operating in a single- - * queue environment. - * @q_vector: pointer to q_vector - * @ring_container: ring info to update the itr for - **/ -static void igb_update_itr(struct igb_q_vector *q_vector, - struct igb_ring_container *ring_container) -{ - unsigned int packets = ring_container->total_packets; - unsigned int bytes = ring_container->total_bytes; - u8 itrval = ring_container->itr; - - /* no packets, exit with status unchanged */ - if (packets == 0) - return; - - switch (itrval) { - case lowest_latency: - /* handle TSO and jumbo frames */ - if (bytes/packets > 8000) - itrval = bulk_latency; - else if ((packets < 5) && (bytes > 512)) - itrval = low_latency; - break; - case low_latency: /* 50 usec aka 20000 ints/s */ - if (bytes > 10000) { - /* this if handles the TSO accounting */ - if (bytes/packets > 8000) { - itrval = bulk_latency; - } else if ((packets < 10) || ((bytes/packets) > 1200)) { - itrval = bulk_latency; - } else if (packets > 35) { - itrval = lowest_latency; - } - } else if (bytes/packets > 2000) { - itrval = bulk_latency; - } else if (packets <= 2 && bytes < 512) { - itrval = lowest_latency; - } - break; - case bulk_latency: /* 250 usec aka 4000 ints/s */ - if (bytes > 25000) { - if (packets > 35) - itrval = low_latency; - } else if (bytes < 1500) { - itrval = low_latency; - } - break; - } - - /* clear work counters since we have the values we need */ - ring_container->total_bytes = 0; - ring_container->total_packets = 0; - - /* write updated itr to ring container */ - ring_container->itr = itrval; -} - -static void igb_set_itr(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - u32 new_itr = q_vector->itr_val; - u8 current_itr = 0; - - /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - current_itr = 0; - new_itr = IGB_4K_ITR; - goto set_itr_now; - default: - break; - } - - igb_update_itr(q_vector, &q_vector->tx); - igb_update_itr(q_vector, &q_vector->rx); - - current_itr = max(q_vector->rx.itr, q_vector->tx.itr); - - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (current_itr == lowest_latency && - ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || - (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) - current_itr = low_latency; - - switch (current_itr) { - /* counts and packets in update_itr are dependent on these numbers */ - case lowest_latency: - new_itr = IGB_70K_ITR; /* 70,000 ints/sec */ - break; - case low_latency: - new_itr = IGB_20K_ITR; /* 20,000 ints/sec */ - break; - case bulk_latency: - new_itr = IGB_4K_ITR; /* 4,000 ints/sec */ - break; - default: - break; - } - -set_itr_now: - if (new_itr != q_vector->itr_val) { - /* this attempts to bias the interrupt rate towards Bulk - * by adding intermediate steps when interrupt rate is - * increasing */ - new_itr = new_itr > q_vector->itr_val ? - max((new_itr * q_vector->itr_val) / - (new_itr + (q_vector->itr_val >> 2)), - new_itr) : - new_itr; - /* Don't write the value here; it resets the adapter's - * internal timer, and causes us to delay far longer than - * we should between interrupts. Instead, we write the ITR - * value at the beginning of the next interrupt so the timing - * ends up being correct. - */ - q_vector->itr_val = new_itr; - q_vector->set_itr = 1; - } -} - -void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens, - u32 type_tucmd, u32 mss_l4len_idx) -{ - struct e1000_adv_tx_context_desc *context_desc; - u16 i = tx_ring->next_to_use; - - context_desc = IGB_TX_CTXTDESC(tx_ring, i); - - i++; - tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; - - /* set bits to identify this as an advanced context descriptor */ - type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT; - - /* For 82575, context index must be unique per ring. */ - if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) - mss_l4len_idx |= tx_ring->reg_idx << 4; - - context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); - context_desc->seqnum_seed = 0; - context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); - context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); -} - -static int igb_tso(struct igb_ring *tx_ring, - struct igb_tx_buffer *first, - u8 *hdr_len) -{ -#ifdef NETIF_F_TSO - struct sk_buff *skb = first->skb; - u32 vlan_macip_lens, type_tucmd; - u32 mss_l4len_idx, l4len; - - if (skb->ip_summed != CHECKSUM_PARTIAL) - return 0; - - if (!skb_is_gso(skb)) -#endif /* NETIF_F_TSO */ - return 0; -#ifdef NETIF_F_TSO - - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } - - /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ - type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP; - - if (first->protocol == __constant_htons(ETH_P_IP)) { - struct iphdr *iph = ip_hdr(skb); - iph->tot_len = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, - IPPROTO_TCP, - 0); - type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; - first->tx_flags |= IGB_TX_FLAGS_TSO | - IGB_TX_FLAGS_CSUM | - IGB_TX_FLAGS_IPV4; -#ifdef NETIF_F_TSO6 - } else if (skb_is_gso_v6(skb)) { - ipv6_hdr(skb)->payload_len = 0; - tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - 0, IPPROTO_TCP, 0); - first->tx_flags |= IGB_TX_FLAGS_TSO | - IGB_TX_FLAGS_CSUM; -#endif - } - - /* compute header lengths */ - l4len = tcp_hdrlen(skb); - *hdr_len = skb_transport_offset(skb) + l4len; - - /* update gso size and bytecount with header size */ - first->gso_segs = skb_shinfo(skb)->gso_segs; - first->bytecount += (first->gso_segs - 1) * *hdr_len; - - /* MSS L4LEN IDX */ - mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT; - mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT; - - /* VLAN MACLEN IPLEN */ - vlan_macip_lens = skb_network_header_len(skb); - vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; - vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; - - igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); - - return 1; -#endif /* NETIF_F_TSO */ -} - -static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first) -{ - struct sk_buff *skb = first->skb; - u32 vlan_macip_lens = 0; - u32 mss_l4len_idx = 0; - u32 type_tucmd = 0; - - if (skb->ip_summed != CHECKSUM_PARTIAL) { - if (!(first->tx_flags & IGB_TX_FLAGS_VLAN)) - return; - } else { - u8 nexthdr = 0; - switch (first->protocol) { - case __constant_htons(ETH_P_IP): - vlan_macip_lens |= skb_network_header_len(skb); - type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; - nexthdr = ip_hdr(skb)->protocol; - break; -#ifdef NETIF_F_IPV6_CSUM - case __constant_htons(ETH_P_IPV6): - vlan_macip_lens |= skb_network_header_len(skb); - nexthdr = ipv6_hdr(skb)->nexthdr; - break; -#endif - default: - if (unlikely(net_ratelimit())) { - dev_warn(tx_ring->dev, - "partial checksum but proto=%x!\n", - first->protocol); - } - break; - } - - switch (nexthdr) { - case IPPROTO_TCP: - type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP; - mss_l4len_idx = tcp_hdrlen(skb) << - E1000_ADVTXD_L4LEN_SHIFT; - break; -#ifdef HAVE_SCTP - case IPPROTO_SCTP: - type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP; - mss_l4len_idx = sizeof(struct sctphdr) << - E1000_ADVTXD_L4LEN_SHIFT; - break; -#endif - case IPPROTO_UDP: - mss_l4len_idx = sizeof(struct udphdr) << - E1000_ADVTXD_L4LEN_SHIFT; - break; - default: - if (unlikely(net_ratelimit())) { - dev_warn(tx_ring->dev, - "partial checksum but l4 proto=%x!\n", - nexthdr); - } - break; - } - - /* update TX checksum flag */ - first->tx_flags |= IGB_TX_FLAGS_CSUM; - } - - vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; - vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; - - igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); -} - -#define IGB_SET_FLAG(_input, _flag, _result) \ - ((_flag <= _result) ? \ - ((u32)(_input & _flag) * (_result / _flag)) : \ - ((u32)(_input & _flag) / (_flag / _result))) - -static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) -{ - /* set type for advanced descriptor with frame checksum insertion */ - u32 cmd_type = E1000_ADVTXD_DTYP_DATA | - E1000_ADVTXD_DCMD_DEXT | - E1000_ADVTXD_DCMD_IFCS; - - /* set HW vlan bit if vlan is present */ - cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN, - (E1000_ADVTXD_DCMD_VLE)); - - /* set segmentation bits for TSO */ - cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO, - (E1000_ADVTXD_DCMD_TSE)); - - /* set timestamp bit if present */ - cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP, - (E1000_ADVTXD_MAC_TSTAMP)); - - return cmd_type; -} - -static void igb_tx_olinfo_status(struct igb_ring *tx_ring, - union e1000_adv_tx_desc *tx_desc, - u32 tx_flags, unsigned int paylen) -{ - u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT; - - /* 82575 requires a unique index per ring */ - if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) - olinfo_status |= tx_ring->reg_idx << 4; - - /* insert L4 checksum */ - olinfo_status |= IGB_SET_FLAG(tx_flags, - IGB_TX_FLAGS_CSUM, - (E1000_TXD_POPTS_TXSM << 8)); - - /* insert IPv4 checksum */ - olinfo_status |= IGB_SET_FLAG(tx_flags, - IGB_TX_FLAGS_IPV4, - (E1000_TXD_POPTS_IXSM << 8)); - - tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); -} - -static void igb_tx_map(struct igb_ring *tx_ring, - struct igb_tx_buffer *first, - const u8 hdr_len) -{ - struct sk_buff *skb = first->skb; - struct igb_tx_buffer *tx_buffer; - union e1000_adv_tx_desc *tx_desc; - struct skb_frag_struct *frag; - dma_addr_t dma; - unsigned int data_len, size; - u32 tx_flags = first->tx_flags; - u32 cmd_type = igb_tx_cmd_type(skb, tx_flags); - u16 i = tx_ring->next_to_use; - - tx_desc = IGB_TX_DESC(tx_ring, i); - - igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len); - - size = skb_headlen(skb); - data_len = skb->data_len; - - dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); - - tx_buffer = first; - - for (frag = &skb_shinfo(skb)->frags[0];; frag++) { - if (dma_mapping_error(tx_ring->dev, dma)) - goto dma_error; - - /* record length, and DMA address */ - dma_unmap_len_set(tx_buffer, len, size); - dma_unmap_addr_set(tx_buffer, dma, dma); - - tx_desc->read.buffer_addr = cpu_to_le64(dma); - - while (unlikely(size > IGB_MAX_DATA_PER_TXD)) { - tx_desc->read.cmd_type_len = - cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD); - - i++; - tx_desc++; - if (i == tx_ring->count) { - tx_desc = IGB_TX_DESC(tx_ring, 0); - i = 0; - } - tx_desc->read.olinfo_status = 0; - - dma += IGB_MAX_DATA_PER_TXD; - size -= IGB_MAX_DATA_PER_TXD; - - tx_desc->read.buffer_addr = cpu_to_le64(dma); - } - - if (likely(!data_len)) - break; - - tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); - - i++; - tx_desc++; - if (i == tx_ring->count) { - tx_desc = IGB_TX_DESC(tx_ring, 0); - i = 0; - } - tx_desc->read.olinfo_status = 0; - - size = skb_frag_size(frag); - data_len -= size; - - dma = skb_frag_dma_map(tx_ring->dev, frag, 0, - size, DMA_TO_DEVICE); - - tx_buffer = &tx_ring->tx_buffer_info[i]; - } - - /* write last descriptor with RS and EOP bits */ - cmd_type |= size | IGB_TXD_DCMD; - tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); - - netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); - /* set the timestamp */ - first->time_stamp = jiffies; - - /* - * Force memory writes to complete before letting h/w know there - * are new descriptors to fetch. (Only applicable for weak-ordered - * memory model archs, such as IA-64). - * - * We also need this memory barrier to make certain all of the - * status bits have been updated before next_to_watch is written. - */ - wmb(); - - /* set next_to_watch value indicating a packet is present */ - first->next_to_watch = tx_desc; - - i++; - if (i == tx_ring->count) - i = 0; - - tx_ring->next_to_use = i; - - writel(i, tx_ring->tail); - - /* we need this if more than one processor can write to our tail - * at a time, it syncronizes IO on IA64/Altix systems */ - mmiowb(); - - return; - -dma_error: - dev_err(tx_ring->dev, "TX DMA map failed\n"); - - /* clear dma mappings for failed tx_buffer_info map */ - for (;;) { - tx_buffer = &tx_ring->tx_buffer_info[i]; - igb_unmap_and_free_tx_resource(tx_ring, tx_buffer); - if (tx_buffer == first) - break; - if (i == 0) - i = tx_ring->count; - i--; - } - - tx_ring->next_to_use = i; -} - -static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) -{ - struct net_device *netdev = netdev_ring(tx_ring); - - if (netif_is_multiqueue(netdev)) - netif_stop_subqueue(netdev, ring_queue_index(tx_ring)); - else - netif_stop_queue(netdev); - - /* Herbert's original patch had: - * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ - smp_mb(); - - /* We need to check again in a case another CPU has just - * made room available. */ - if (igb_desc_unused(tx_ring) < size) - return -EBUSY; - - /* A reprieve! */ - if (netif_is_multiqueue(netdev)) - netif_wake_subqueue(netdev, ring_queue_index(tx_ring)); - else - netif_wake_queue(netdev); - - tx_ring->tx_stats.restart_queue++; - - return 0; -} - -static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) -{ - if (igb_desc_unused(tx_ring) >= size) - return 0; - return __igb_maybe_stop_tx(tx_ring, size); -} - -netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, - struct igb_ring *tx_ring) -{ - struct igb_tx_buffer *first; - int tso; - u32 tx_flags = 0; -#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD - unsigned short f; -#endif - u16 count = TXD_USE_COUNT(skb_headlen(skb)); - __be16 protocol = vlan_get_protocol(skb); - u8 hdr_len = 0; - - /* - * need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD, - * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD, - * + 2 desc gap to keep tail from touching head, - * + 1 desc for context descriptor, - * otherwise try next time - */ -#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD - for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) - count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); -#else - count += skb_shinfo(skb)->nr_frags; -#endif - if (igb_maybe_stop_tx(tx_ring, count + 3)) { - /* this is a hard error */ - return NETDEV_TX_BUSY; - } - - /* record the location of the first descriptor for this packet */ - first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; - first->skb = skb; - first->bytecount = skb->len; - first->gso_segs = 1; - - skb_tx_timestamp(skb); - -#ifdef HAVE_PTP_1588_CLOCK - if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { - struct igb_adapter *adapter = netdev_priv(tx_ring->netdev); - if (!adapter->ptp_tx_skb) { - skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; - tx_flags |= IGB_TX_FLAGS_TSTAMP; - - adapter->ptp_tx_skb = skb_get(skb); - adapter->ptp_tx_start = jiffies; - if (adapter->hw.mac.type == e1000_82576) - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - if (vlan_tx_tag_present(skb)) { - tx_flags |= IGB_TX_FLAGS_VLAN; - tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT); - } - - /* record initial flags and protocol */ - first->tx_flags = tx_flags; - first->protocol = protocol; - - tso = igb_tso(tx_ring, first, &hdr_len); - if (tso < 0) - goto out_drop; - else if (!tso) - igb_tx_csum(tx_ring, first); - - igb_tx_map(tx_ring, first, hdr_len); - -#ifndef HAVE_TRANS_START_IN_QUEUE - netdev_ring(tx_ring)->trans_start = jiffies; - -#endif - /* Make sure there is space in the ring for the next send. */ - igb_maybe_stop_tx(tx_ring, DESC_NEEDED); - - return NETDEV_TX_OK; - -out_drop: - igb_unmap_and_free_tx_resource(tx_ring, first); - - return NETDEV_TX_OK; -} - -#ifdef HAVE_TX_MQ -static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter, - struct sk_buff *skb) -{ - unsigned int r_idx = skb->queue_mapping; - - if (r_idx >= adapter->num_tx_queues) - r_idx = r_idx % adapter->num_tx_queues; - - return adapter->tx_ring[r_idx]; -} -#else -#define igb_tx_queue_mapping(_adapter, _skb) (_adapter)->tx_ring[0] -#endif - -static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, - struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - if (test_bit(__IGB_DOWN, &adapter->state)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (skb->len <= 0) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - /* - * The minimum packet size with TCTL.PSP set is 17 so pad the skb - * in order to meet this minimum size requirement. - */ - if (skb->len < 17) { - if (skb_padto(skb, 17)) - return NETDEV_TX_OK; - skb->len = 17; - } - - return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb)); -} - -/** - * igb_tx_timeout - Respond to a Tx Hang - * @netdev: network interface device structure - **/ -static void igb_tx_timeout(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - /* Do the reset outside of interrupt context */ - adapter->tx_timeout_count++; - - if (hw->mac.type >= e1000_82580) - hw->dev_spec._82575.global_device_reset = true; - - schedule_work(&adapter->reset_task); - E1000_WRITE_REG(hw, E1000_EICS, - (adapter->eims_enable_mask & ~adapter->eims_other)); -} - -static void igb_reset_task(struct work_struct *work) -{ - struct igb_adapter *adapter; - adapter = container_of(work, struct igb_adapter, reset_task); - - igb_reinit_locked(adapter); -} - -/** - * igb_get_stats - Get System Network Statistics - * @netdev: network interface device structure - * - * Returns the address of the device statistics structure. - * The statistics are updated here and also from the timer callback. - **/ -static struct net_device_stats *igb_get_stats(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - if (!test_bit(__IGB_RESETTING, &adapter->state)) - igb_update_stats(adapter); - -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - /* only return the current stats */ - return &netdev->stats; -#else - /* only return the current stats */ - return &adapter->net_stats; -#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ -} - -/** - * igb_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - **/ -static int igb_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct pci_dev *pdev = adapter->pdev; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - dev_err(pci_dev_to_dev(pdev), "Invalid MTU setting\n"); - return -EINVAL; - } - -#define MAX_STD_JUMBO_FRAME_SIZE 9238 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - dev_err(pci_dev_to_dev(pdev), "MTU > 9216 not supported.\n"); - return -EINVAL; - } - - /* adjust max frame to be at least the size of a standard frame */ - if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) - max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; - - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - - /* igb_down has a dependency on max_frame_size */ - adapter->max_frame_size = max_frame; - - if (netif_running(netdev)) - igb_down(adapter); - - dev_info(pci_dev_to_dev(pdev), "changing MTU from %d to %d\n", - netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - hw->dev_spec._82575.mtu = new_mtu; - - if (netif_running(netdev)) - igb_up(adapter); - else - igb_reset(adapter); - - clear_bit(__IGB_RESETTING, &adapter->state); - - return 0; -} - -/** - * igb_update_stats - Update the board statistics counters - * @adapter: board private structure - **/ - -void igb_update_stats(struct igb_adapter *adapter) -{ -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - struct net_device_stats *net_stats = &adapter->netdev->stats; -#else - struct net_device_stats *net_stats = &adapter->net_stats; -#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ - struct e1000_hw *hw = &adapter->hw; -#ifdef HAVE_PCI_ERS - struct pci_dev *pdev = adapter->pdev; -#endif - u32 reg, mpc; - u16 phy_tmp; - int i; - u64 bytes, packets; -#ifndef IGB_NO_LRO - u32 flushed = 0, coal = 0; - struct igb_q_vector *q_vector; -#endif - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF - - /* - * Prevent stats update while adapter is being reset, or if the pci - * connection is down. - */ - if (adapter->link_speed == 0) - return; -#ifdef HAVE_PCI_ERS - if (pci_channel_offline(pdev)) - return; - -#endif -#ifndef IGB_NO_LRO - for (i = 0; i < adapter->num_q_vectors; i++) { - q_vector = adapter->q_vector[i]; - if (!q_vector) - continue; - flushed += q_vector->lrolist.stats.flushed; - coal += q_vector->lrolist.stats.coal; - } - adapter->lro_stats.flushed = flushed; - adapter->lro_stats.coal = coal; - -#endif - bytes = 0; - packets = 0; - for (i = 0; i < adapter->num_rx_queues; i++) { - u32 rqdpc_tmp = E1000_READ_REG(hw, E1000_RQDPC(i)) & 0x0FFF; - struct igb_ring *ring = adapter->rx_ring[i]; - ring->rx_stats.drops += rqdpc_tmp; - net_stats->rx_fifo_errors += rqdpc_tmp; -#ifdef CONFIG_IGB_VMDQ_NETDEV - if (!ring->vmdq_netdev) { - bytes += ring->rx_stats.bytes; - packets += ring->rx_stats.packets; - } -#else - bytes += ring->rx_stats.bytes; - packets += ring->rx_stats.packets; -#endif - } - - net_stats->rx_bytes = bytes; - net_stats->rx_packets = packets; - - bytes = 0; - packets = 0; - for (i = 0; i < adapter->num_tx_queues; i++) { - struct igb_ring *ring = adapter->tx_ring[i]; -#ifdef CONFIG_IGB_VMDQ_NETDEV - if (!ring->vmdq_netdev) { - bytes += ring->tx_stats.bytes; - packets += ring->tx_stats.packets; - } -#else - bytes += ring->tx_stats.bytes; - packets += ring->tx_stats.packets; -#endif - } - net_stats->tx_bytes = bytes; - net_stats->tx_packets = packets; - - /* read stats registers */ - adapter->stats.crcerrs += E1000_READ_REG(hw, E1000_CRCERRS); - adapter->stats.gprc += E1000_READ_REG(hw, E1000_GPRC); - adapter->stats.gorc += E1000_READ_REG(hw, E1000_GORCL); - E1000_READ_REG(hw, E1000_GORCH); /* clear GORCL */ - adapter->stats.bprc += E1000_READ_REG(hw, E1000_BPRC); - adapter->stats.mprc += E1000_READ_REG(hw, E1000_MPRC); - adapter->stats.roc += E1000_READ_REG(hw, E1000_ROC); - - adapter->stats.prc64 += E1000_READ_REG(hw, E1000_PRC64); - adapter->stats.prc127 += E1000_READ_REG(hw, E1000_PRC127); - adapter->stats.prc255 += E1000_READ_REG(hw, E1000_PRC255); - adapter->stats.prc511 += E1000_READ_REG(hw, E1000_PRC511); - adapter->stats.prc1023 += E1000_READ_REG(hw, E1000_PRC1023); - adapter->stats.prc1522 += E1000_READ_REG(hw, E1000_PRC1522); - adapter->stats.symerrs += E1000_READ_REG(hw, E1000_SYMERRS); - adapter->stats.sec += E1000_READ_REG(hw, E1000_SEC); - - mpc = E1000_READ_REG(hw, E1000_MPC); - adapter->stats.mpc += mpc; - net_stats->rx_fifo_errors += mpc; - adapter->stats.scc += E1000_READ_REG(hw, E1000_SCC); - adapter->stats.ecol += E1000_READ_REG(hw, E1000_ECOL); - adapter->stats.mcc += E1000_READ_REG(hw, E1000_MCC); - adapter->stats.latecol += E1000_READ_REG(hw, E1000_LATECOL); - adapter->stats.dc += E1000_READ_REG(hw, E1000_DC); - adapter->stats.rlec += E1000_READ_REG(hw, E1000_RLEC); - adapter->stats.xonrxc += E1000_READ_REG(hw, E1000_XONRXC); - adapter->stats.xontxc += E1000_READ_REG(hw, E1000_XONTXC); - adapter->stats.xoffrxc += E1000_READ_REG(hw, E1000_XOFFRXC); - adapter->stats.xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC); - adapter->stats.fcruc += E1000_READ_REG(hw, E1000_FCRUC); - adapter->stats.gptc += E1000_READ_REG(hw, E1000_GPTC); - adapter->stats.gotc += E1000_READ_REG(hw, E1000_GOTCL); - E1000_READ_REG(hw, E1000_GOTCH); /* clear GOTCL */ - adapter->stats.rnbc += E1000_READ_REG(hw, E1000_RNBC); - adapter->stats.ruc += E1000_READ_REG(hw, E1000_RUC); - adapter->stats.rfc += E1000_READ_REG(hw, E1000_RFC); - adapter->stats.rjc += E1000_READ_REG(hw, E1000_RJC); - adapter->stats.tor += E1000_READ_REG(hw, E1000_TORH); - adapter->stats.tot += E1000_READ_REG(hw, E1000_TOTH); - adapter->stats.tpr += E1000_READ_REG(hw, E1000_TPR); - - adapter->stats.ptc64 += E1000_READ_REG(hw, E1000_PTC64); - adapter->stats.ptc127 += E1000_READ_REG(hw, E1000_PTC127); - adapter->stats.ptc255 += E1000_READ_REG(hw, E1000_PTC255); - adapter->stats.ptc511 += E1000_READ_REG(hw, E1000_PTC511); - adapter->stats.ptc1023 += E1000_READ_REG(hw, E1000_PTC1023); - adapter->stats.ptc1522 += E1000_READ_REG(hw, E1000_PTC1522); - - adapter->stats.mptc += E1000_READ_REG(hw, E1000_MPTC); - adapter->stats.bptc += E1000_READ_REG(hw, E1000_BPTC); - - adapter->stats.tpt += E1000_READ_REG(hw, E1000_TPT); - adapter->stats.colc += E1000_READ_REG(hw, E1000_COLC); - - adapter->stats.algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC); - /* read internal phy sepecific stats */ - reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) { - adapter->stats.rxerrc += E1000_READ_REG(hw, E1000_RXERRC); - - /* this stat has invalid values on i210/i211 */ - if ((hw->mac.type != e1000_i210) && - (hw->mac.type != e1000_i211)) - adapter->stats.tncrs += E1000_READ_REG(hw, E1000_TNCRS); - } - adapter->stats.tsctc += E1000_READ_REG(hw, E1000_TSCTC); - adapter->stats.tsctfc += E1000_READ_REG(hw, E1000_TSCTFC); - - adapter->stats.iac += E1000_READ_REG(hw, E1000_IAC); - adapter->stats.icrxoc += E1000_READ_REG(hw, E1000_ICRXOC); - adapter->stats.icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC); - adapter->stats.icrxatc += E1000_READ_REG(hw, E1000_ICRXATC); - adapter->stats.ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC); - adapter->stats.ictxatc += E1000_READ_REG(hw, E1000_ICTXATC); - adapter->stats.ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC); - adapter->stats.ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC); - adapter->stats.icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC); - - /* Fill out the OS statistics structure */ - net_stats->multicast = adapter->stats.mprc; - net_stats->collisions = adapter->stats.colc; - - /* Rx Errors */ - - /* RLEC on some newer hardware can be incorrect so build - * our own version based on RUC and ROC */ - net_stats->rx_errors = adapter->stats.rxerrc + - adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.ruc + adapter->stats.roc + - adapter->stats.cexterr; - net_stats->rx_length_errors = adapter->stats.ruc + - adapter->stats.roc; - net_stats->rx_crc_errors = adapter->stats.crcerrs; - net_stats->rx_frame_errors = adapter->stats.algnerrc; - net_stats->rx_missed_errors = adapter->stats.mpc; - - /* Tx Errors */ - net_stats->tx_errors = adapter->stats.ecol + - adapter->stats.latecol; - net_stats->tx_aborted_errors = adapter->stats.ecol; - net_stats->tx_window_errors = adapter->stats.latecol; - net_stats->tx_carrier_errors = adapter->stats.tncrs; - - /* Tx Dropped needs to be maintained elsewhere */ - - /* Phy Stats */ - if (hw->phy.media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - - /* Management Stats */ - adapter->stats.mgptc += E1000_READ_REG(hw, E1000_MGTPTC); - adapter->stats.mgprc += E1000_READ_REG(hw, E1000_MGTPRC); - if (hw->mac.type > e1000_82580) { - adapter->stats.o2bgptc += E1000_READ_REG(hw, E1000_O2BGPTC); - adapter->stats.o2bspc += E1000_READ_REG(hw, E1000_O2BSPC); - adapter->stats.b2ospc += E1000_READ_REG(hw, E1000_B2OSPC); - adapter->stats.b2ogprc += E1000_READ_REG(hw, E1000_B2OGPRC); - } -} - -static irqreturn_t igb_msix_other(int irq, void *data) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - u32 icr = E1000_READ_REG(hw, E1000_ICR); - /* reading ICR causes bit 31 of EICR to be cleared */ - - if (icr & E1000_ICR_DRSTA) - schedule_work(&adapter->reset_task); - - if (icr & E1000_ICR_DOUTSYNC) { - /* HW is reporting DMA is out of sync */ - adapter->stats.doosync++; - /* The DMA Out of Sync is also indication of a spoof event - * in IOV mode. Check the Wrong VM Behavior register to - * see if it is really a spoof event. */ - igb_check_wvbr(adapter); - } - - /* Check for a mailbox event */ - if (icr & E1000_ICR_VMMB) - igb_msg_task(adapter); - - if (icr & E1000_ICR_LSC) { - hw->mac.get_link_status = 1; - /* guard against interrupt when we're going down */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - -#ifdef HAVE_PTP_1588_CLOCK - if (icr & E1000_ICR_TS) { - u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); - - if (tsicr & E1000_TSICR_TXTS) { - /* acknowledge the interrupt */ - E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); - /* retrieve hardware timestamp */ - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - /* Check for MDD event */ - if (icr & E1000_ICR_MDDET) - igb_process_mdd_event(adapter); - - E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_other); - - return IRQ_HANDLED; -} - -static void igb_write_itr(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - u32 itr_val = q_vector->itr_val & 0x7FFC; - - if (!q_vector->set_itr) - return; - - if (!itr_val) - itr_val = 0x4; - - if (adapter->hw.mac.type == e1000_82575) - itr_val |= itr_val << 16; - else - itr_val |= E1000_EITR_CNT_IGNR; - - writel(itr_val, q_vector->itr_register); - q_vector->set_itr = 0; -} - -static irqreturn_t igb_msix_ring(int irq, void *data) -{ - struct igb_q_vector *q_vector = data; - - /* Write the ITR value calculated from the previous interrupt. */ - igb_write_itr(q_vector); - - napi_schedule(&q_vector->napi); - - return IRQ_HANDLED; -} - -#ifdef IGB_DCA -static void igb_update_tx_dca(struct igb_adapter *adapter, - struct igb_ring *tx_ring, - int cpu) -{ - struct e1000_hw *hw = &adapter->hw; - u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); - - if (hw->mac.type != e1000_82575) - txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT_82576; - - /* - * We can enable relaxed ordering for reads, but not writes when - * DCA is enabled. This is due to a known issue in some chipsets - * which will cause the DCA tag to be cleared. - */ - txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN | - E1000_DCA_TXCTRL_DATA_RRO_EN | - E1000_DCA_TXCTRL_DESC_DCA_EN; - - E1000_WRITE_REG(hw, E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl); -} - -static void igb_update_rx_dca(struct igb_adapter *adapter, - struct igb_ring *rx_ring, - int cpu) -{ - struct e1000_hw *hw = &adapter->hw; - u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu); - - if (hw->mac.type != e1000_82575) - rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT_82576; - - /* - * We can enable relaxed ordering for reads, but not writes when - * DCA is enabled. This is due to a known issue in some chipsets - * which will cause the DCA tag to be cleared. - */ - rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN | - E1000_DCA_RXCTRL_DESC_DCA_EN; - - E1000_WRITE_REG(hw, E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl); -} - -static void igb_update_dca(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - int cpu = get_cpu(); - - if (q_vector->cpu == cpu) - goto out_no_update; - - if (q_vector->tx.ring) - igb_update_tx_dca(adapter, q_vector->tx.ring, cpu); - - if (q_vector->rx.ring) - igb_update_rx_dca(adapter, q_vector->rx.ring, cpu); - - q_vector->cpu = cpu; -out_no_update: - put_cpu(); -} - -static void igb_setup_dca(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - if (!(adapter->flags & IGB_FLAG_DCA_ENABLED)) - return; - - /* Always use CB2 mode, difference is masked in the CB driver. */ - E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2); - - for (i = 0; i < adapter->num_q_vectors; i++) { - adapter->q_vector[i]->cpu = -1; - igb_update_dca(adapter->q_vector[i]); - } -} - -static int __igb_notify_dca(struct device *dev, void *data) -{ - struct net_device *netdev = dev_get_drvdata(dev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct pci_dev *pdev = adapter->pdev; - struct e1000_hw *hw = &adapter->hw; - unsigned long event = *(unsigned long *)data; - - switch (event) { - case DCA_PROVIDER_ADD: - /* if already enabled, don't do it again */ - if (adapter->flags & IGB_FLAG_DCA_ENABLED) - break; - if (dca_add_requester(dev) == E1000_SUCCESS) { - adapter->flags |= IGB_FLAG_DCA_ENABLED; - dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); - igb_setup_dca(adapter); - break; - } - /* Fall Through since DCA is disabled. */ - case DCA_PROVIDER_REMOVE: - if (adapter->flags & IGB_FLAG_DCA_ENABLED) { - /* without this a class_device is left - * hanging around in the sysfs model */ - dca_remove_requester(dev); - dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); - adapter->flags &= ~IGB_FLAG_DCA_ENABLED; - E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); - } - break; - } - - return E1000_SUCCESS; -} - -static int igb_notify_dca(struct notifier_block *nb, unsigned long event, - void *p) -{ - int ret_val; - - ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event, - __igb_notify_dca); - - return ret_val ? NOTIFY_BAD : NOTIFY_DONE; -} -#endif /* IGB_DCA */ - -static int igb_vf_configure(struct igb_adapter *adapter, int vf) -{ - unsigned char mac_addr[ETH_ALEN]; - - random_ether_addr(mac_addr); - igb_set_vf_mac(adapter, vf, mac_addr); - -#ifdef IFLA_VF_MAX -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE - /* By default spoof check is enabled for all VFs */ - adapter->vf_data[vf].spoofchk_enabled = true; -#endif -#endif - - return true; -} - -static void igb_ping_all_vfs(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ping; - int i; - - for (i = 0 ; i < adapter->vfs_allocated_count; i++) { - ping = E1000_PF_CONTROL_MSG; - if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS) - ping |= E1000_VT_MSGTYPE_CTS; - e1000_write_mbx(hw, &ping, 1, i); - } -} - -/** - * igb_mta_set_ - Set multicast filter table address - * @adapter: pointer to the adapter structure - * @hash_value: determines the MTA register and bit to set - * - * The multicast table address is a register array of 32-bit registers. - * The hash_value is used to determine what register the bit is in, the - * current value is read, the new bit is OR'd in and the new value is - * written back into the register. - **/ -void igb_mta_set(struct igb_adapter *adapter, u32 hash_value) -{ - struct e1000_hw *hw = &adapter->hw; - u32 hash_bit, hash_reg, mta; - - /* - * The MTA is a register array of 32-bit registers. It is - * treated like an array of (32*mta_reg_count) bits. We want to - * set bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The (hw->mac.mta_reg_count - 1) serves as a - * mask to bits 31:5 of the hash value which gives us the - * register we're modifying. The hash bit within that register - * is determined by the lower 5 bits of the hash value. - */ - hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); - hash_bit = hash_value & 0x1F; - - mta = E1000_READ_REG_ARRAY(hw, E1000_MTA, hash_reg); - - mta |= (1 << hash_bit); - - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, hash_reg, mta); - E1000_WRITE_FLUSH(hw); -} - -static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) -{ - - struct e1000_hw *hw = &adapter->hw; - u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf)); - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - - vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC | - IGB_VF_FLAG_MULTI_PROMISC); - vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); - -#ifdef IGB_ENABLE_VF_PROMISC - if (*msgbuf & E1000_VF_SET_PROMISC_UNICAST) { - vmolr |= E1000_VMOLR_ROPE; - vf_data->flags |= IGB_VF_FLAG_UNI_PROMISC; - *msgbuf &= ~E1000_VF_SET_PROMISC_UNICAST; - } -#endif - if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) { - vmolr |= E1000_VMOLR_MPME; - vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC; - *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST; - } else { - /* - * if we have hashes and we are clearing a multicast promisc - * flag we need to write the hashes to the MTA as this step - * was previously skipped - */ - if (vf_data->num_vf_mc_hashes > 30) { - vmolr |= E1000_VMOLR_MPME; - } else if (vf_data->num_vf_mc_hashes) { - int j; - vmolr |= E1000_VMOLR_ROMPE; - for (j = 0; j < vf_data->num_vf_mc_hashes; j++) - igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); - } - } - - E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr); - - /* there are flags left unprocessed, likely not supported */ - if (*msgbuf & E1000_VT_MSGINFO_MASK) - return -EINVAL; - - return 0; - -} - -static int igb_set_vf_multicasts(struct igb_adapter *adapter, - u32 *msgbuf, u32 vf) -{ - int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; - u16 *hash_list = (u16 *)&msgbuf[1]; - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - int i; - - /* salt away the number of multicast addresses assigned - * to this VF for later use to restore when the PF multi cast - * list changes - */ - vf_data->num_vf_mc_hashes = n; - - /* only up to 30 hash values supported */ - if (n > 30) - n = 30; - - /* store the hashes for later use */ - for (i = 0; i < n; i++) - vf_data->vf_mc_hashes[i] = hash_list[i]; - - /* Flush and reset the mta with the new values */ - igb_set_rx_mode(adapter->netdev); - - return 0; -} - -static void igb_restore_vf_multicasts(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct vf_data_storage *vf_data; - int i, j; - - for (i = 0; i < adapter->vfs_allocated_count; i++) { - u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(i)); - vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); - - vf_data = &adapter->vf_data[i]; - - if ((vf_data->num_vf_mc_hashes > 30) || - (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) { - vmolr |= E1000_VMOLR_MPME; - } else if (vf_data->num_vf_mc_hashes) { - vmolr |= E1000_VMOLR_ROMPE; - for (j = 0; j < vf_data->num_vf_mc_hashes; j++) - igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); - } - E1000_WRITE_REG(hw, E1000_VMOLR(i), vmolr); - } -} - -static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - u32 pool_mask, reg, vid; - u16 vlan_default; - int i; - - pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); - - /* Find the vlan filter for this id */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - - /* remove the vf from the pool */ - reg &= ~pool_mask; - - /* if pool is empty then remove entry from vfta */ - if (!(reg & E1000_VLVF_POOLSEL_MASK) && - (reg & E1000_VLVF_VLANID_ENABLE)) { - reg = 0; - vid = reg & E1000_VLVF_VLANID_MASK; - igb_vfta_set(adapter, vid, FALSE); - } - - E1000_WRITE_REG(hw, E1000_VLVF(i), reg); - } - - adapter->vf_data[vf].vlans_enabled = 0; - - vlan_default = adapter->vf_data[vf].default_vf_vlan_id; - if (vlan_default) - igb_vlvf_set(adapter, vlan_default, true, vf); -} - -s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - u32 reg, i; - - /* The vlvf table only exists on 82576 hardware and newer */ - if (hw->mac.type < e1000_82576) - return -1; - - /* we only need to do this if VMDq is enabled */ - if (!adapter->vmdq_pools) - return -1; - - /* Find the vlan filter for this id */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - if ((reg & E1000_VLVF_VLANID_ENABLE) && - vid == (reg & E1000_VLVF_VLANID_MASK)) - break; - } - - if (add) { - if (i == E1000_VLVF_ARRAY_SIZE) { - /* Did not find a matching VLAN ID entry that was - * enabled. Search for a free filter entry, i.e. - * one without the enable bit set - */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - if (!(reg & E1000_VLVF_VLANID_ENABLE)) - break; - } - } - if (i < E1000_VLVF_ARRAY_SIZE) { - /* Found an enabled/available entry */ - reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); - - /* if !enabled we need to set this up in vfta */ - if (!(reg & E1000_VLVF_VLANID_ENABLE)) { - /* add VID to filter table */ - igb_vfta_set(adapter, vid, TRUE); - reg |= E1000_VLVF_VLANID_ENABLE; - } - reg &= ~E1000_VLVF_VLANID_MASK; - reg |= vid; - E1000_WRITE_REG(hw, E1000_VLVF(i), reg); - - /* do not modify RLPML for PF devices */ - if (vf >= adapter->vfs_allocated_count) - return E1000_SUCCESS; - - if (!adapter->vf_data[vf].vlans_enabled) { - u32 size; - reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); - size = reg & E1000_VMOLR_RLPML_MASK; - size += 4; - reg &= ~E1000_VMOLR_RLPML_MASK; - reg |= size; - E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); - } - - adapter->vf_data[vf].vlans_enabled++; - } - } else { - if (i < E1000_VLVF_ARRAY_SIZE) { - /* remove vf from the pool */ - reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf)); - /* if pool is empty then remove entry from vfta */ - if (!(reg & E1000_VLVF_POOLSEL_MASK)) { - reg = 0; - igb_vfta_set(adapter, vid, FALSE); - } - E1000_WRITE_REG(hw, E1000_VLVF(i), reg); - - /* do not modify RLPML for PF devices */ - if (vf >= adapter->vfs_allocated_count) - return E1000_SUCCESS; - - adapter->vf_data[vf].vlans_enabled--; - if (!adapter->vf_data[vf].vlans_enabled) { - u32 size; - reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); - size = reg & E1000_VMOLR_RLPML_MASK; - size -= 4; - reg &= ~E1000_VMOLR_RLPML_MASK; - reg |= size; - E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); - } - } - } - return E1000_SUCCESS; -} - -#ifdef IFLA_VF_MAX -static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - - if (vid) - E1000_WRITE_REG(hw, E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT)); - else - E1000_WRITE_REG(hw, E1000_VMVIR(vf), 0); -} - -static int igb_ndo_set_vf_vlan(struct net_device *netdev, -#ifdef HAVE_VF_VLAN_PROTO - int vf, u16 vlan, u8 qos, __be16 vlan_proto) -#else - int vf, u16 vlan, u8 qos) -#endif -{ - int err = 0; - struct igb_adapter *adapter = netdev_priv(netdev); - - /* VLAN IDs accepted range 0-4094 */ - if ((vf >= adapter->vfs_allocated_count) || (vlan > VLAN_VID_MASK-1) || (qos > 7)) - return -EINVAL; - -#ifdef HAVE_VF_VLAN_PROTO - if (vlan_proto != htons(ETH_P_8021Q)) - return -EPROTONOSUPPORT; -#endif - - if (vlan || qos) { - err = igb_vlvf_set(adapter, vlan, !!vlan, vf); - if (err) - goto out; - igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf); - igb_set_vmolr(adapter, vf, !vlan); - adapter->vf_data[vf].pf_vlan = vlan; - adapter->vf_data[vf].pf_qos = qos; - igb_set_vf_vlan_strip(adapter, vf, true); - dev_info(&adapter->pdev->dev, - "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf); - if (test_bit(__IGB_DOWN, &adapter->state)) { - dev_warn(&adapter->pdev->dev, - "The VF VLAN has been set," - " but the PF device is not up.\n"); - dev_warn(&adapter->pdev->dev, - "Bring the PF device up before" - " attempting to use the VF device.\n"); - } - } else { - if (adapter->vf_data[vf].pf_vlan) - dev_info(&adapter->pdev->dev, - "Clearing VLAN on VF %d\n", vf); - igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan, - false, vf); - igb_set_vmvir(adapter, vlan, vf); - igb_set_vmolr(adapter, vf, true); - igb_set_vf_vlan_strip(adapter, vf, false); - adapter->vf_data[vf].pf_vlan = 0; - adapter->vf_data[vf].pf_qos = 0; - } -out: - return err; -} - -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE -static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, - bool setting) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 dtxswc, reg_offset; - - if (!adapter->vfs_allocated_count) - return -EOPNOTSUPP; - - if (vf >= adapter->vfs_allocated_count) - return -EINVAL; - - reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC; - dtxswc = E1000_READ_REG(hw, reg_offset); - if (setting) - dtxswc |= ((1 << vf) | - (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); - else - dtxswc &= ~((1 << vf) | - (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); - E1000_WRITE_REG(hw, reg_offset, dtxswc); - - adapter->vf_data[vf].spoofchk_enabled = setting; - return E1000_SUCCESS; -} -#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ -#endif /* IFLA_VF_MAX */ - -static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - u32 reg; - - /* Find the vlan filter for this id */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - if ((reg & E1000_VLVF_VLANID_ENABLE) && - vid == (reg & E1000_VLVF_VLANID_MASK)) - break; - } - - if (i >= E1000_VLVF_ARRAY_SIZE) - i = -1; - - return i; -} - -static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; - int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK); - int err = 0; - - if (vid) - igb_set_vf_vlan_strip(adapter, vf, true); - else - igb_set_vf_vlan_strip(adapter, vf, false); - - /* If in promiscuous mode we need to make sure the PF also has - * the VLAN filter set. - */ - if (add && (adapter->netdev->flags & IFF_PROMISC)) - err = igb_vlvf_set(adapter, vid, add, - adapter->vfs_allocated_count); - if (err) - goto out; - - err = igb_vlvf_set(adapter, vid, add, vf); - - if (err) - goto out; - - /* Go through all the checks to see if the VLAN filter should - * be wiped completely. - */ - if (!add && (adapter->netdev->flags & IFF_PROMISC)) { - u32 vlvf, bits; - - int regndx = igb_find_vlvf_entry(adapter, vid); - if (regndx < 0) - goto out; - /* See if any other pools are set for this VLAN filter - * entry other than the PF. - */ - vlvf = bits = E1000_READ_REG(hw, E1000_VLVF(regndx)); - bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT + - adapter->vfs_allocated_count); - /* If the filter was removed then ensure PF pool bit - * is cleared if the PF only added itself to the pool - * because the PF is in promiscuous mode. - */ - if ((vlvf & VLAN_VID_MASK) == vid && -#ifndef HAVE_VLAN_RX_REGISTER - !test_bit(vid, adapter->active_vlans) && -#endif - !bits) - igb_vlvf_set(adapter, vid, add, - adapter->vfs_allocated_count); - } - -out: - return err; -} - -static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - - /* clear flags except flag that the PF has set the MAC */ - adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC; - adapter->vf_data[vf].last_nack = jiffies; - - /* reset offloads to defaults */ - igb_set_vmolr(adapter, vf, true); - - /* reset vlans for device */ - igb_clear_vf_vfta(adapter, vf); -#ifdef IFLA_VF_MAX - if (adapter->vf_data[vf].pf_vlan) - igb_ndo_set_vf_vlan(adapter->netdev, vf, - adapter->vf_data[vf].pf_vlan, -#ifdef HAVE_VF_VLAN_PROTO - adapter->vf_data[vf].pf_qos, - htons(ETH_P_8021Q)); -#else - adapter->vf_data[vf].pf_qos); -#endif - else - igb_clear_vf_vfta(adapter, vf); -#endif - - /* reset multicast table array for vf */ - adapter->vf_data[vf].num_vf_mc_hashes = 0; - - /* Flush and reset the mta with the new values */ - igb_set_rx_mode(adapter->netdev); - - /* - * Reset the VFs TDWBAL and TDWBAH registers which are not - * cleared by a VFLR - */ - E1000_WRITE_REG(hw, E1000_TDWBAH(vf), 0); - E1000_WRITE_REG(hw, E1000_TDWBAL(vf), 0); - if (hw->mac.type == e1000_82576) { - E1000_WRITE_REG(hw, E1000_TDWBAH(IGB_MAX_VF_FUNCTIONS + vf), 0); - E1000_WRITE_REG(hw, E1000_TDWBAL(IGB_MAX_VF_FUNCTIONS + vf), 0); - } -} - -static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf) -{ - unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; - - /* generate a new mac address as we were hotplug removed/added */ - if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC)) - random_ether_addr(vf_mac); - - /* process remaining reset events */ - igb_vf_reset(adapter, vf); -} - -static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; - u32 reg, msgbuf[3]; - u8 *addr = (u8 *)(&msgbuf[1]); - - /* process all the same items cleared in a function level reset */ - igb_vf_reset(adapter, vf); - - /* set vf mac address */ - igb_del_mac_filter(adapter, vf_mac, vf); - igb_add_mac_filter(adapter, vf_mac, vf); - - /* enable transmit and receive for vf */ - reg = E1000_READ_REG(hw, E1000_VFTE); - E1000_WRITE_REG(hw, E1000_VFTE, reg | (1 << vf)); - reg = E1000_READ_REG(hw, E1000_VFRE); - E1000_WRITE_REG(hw, E1000_VFRE, reg | (1 << vf)); - - adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS; - - /* reply to reset with ack and vf mac address */ - msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK; - memcpy(addr, vf_mac, 6); - e1000_write_mbx(hw, msgbuf, 3, vf); -} - -static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf) -{ - /* - * The VF MAC Address is stored in a packed array of bytes - * starting at the second 32 bit word of the msg array - */ - unsigned char *addr = (unsigned char *)&msg[1]; - int err = -1; - - if (is_valid_ether_addr(addr)) - err = igb_set_vf_mac(adapter, vf, addr); - - return err; -} - -static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - u32 msg = E1000_VT_MSGTYPE_NACK; - - /* if device isn't clear to send it shouldn't be reading either */ - if (!(vf_data->flags & IGB_VF_FLAG_CTS) && - time_after(jiffies, vf_data->last_nack + (2 * HZ))) { - e1000_write_mbx(hw, &msg, 1, vf); - vf_data->last_nack = jiffies; - } -} - -static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) -{ - struct pci_dev *pdev = adapter->pdev; - u32 msgbuf[E1000_VFMAILBOX_SIZE]; - struct e1000_hw *hw = &adapter->hw; - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - s32 retval; - - retval = e1000_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf); - - if (retval) { - dev_err(pci_dev_to_dev(pdev), "Error receiving message from VF\n"); - return; - } - - /* this is a message we already processed, do nothing */ - if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK)) - return; - - /* - * until the vf completes a reset it should not be - * allowed to start any configuration. - */ - - if (msgbuf[0] == E1000_VF_RESET) { - igb_vf_reset_msg(adapter, vf); - return; - } - - if (!(vf_data->flags & IGB_VF_FLAG_CTS)) { - msgbuf[0] = E1000_VT_MSGTYPE_NACK; - if (time_after(jiffies, vf_data->last_nack + (2 * HZ))) { - e1000_write_mbx(hw, msgbuf, 1, vf); - vf_data->last_nack = jiffies; - } - return; - } - - switch ((msgbuf[0] & 0xFFFF)) { - case E1000_VF_SET_MAC_ADDR: - retval = -EINVAL; -#ifndef IGB_DISABLE_VF_MAC_SET - if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC)) - retval = igb_set_vf_mac_addr(adapter, msgbuf, vf); - else - DPRINTK(DRV, INFO, - "VF %d attempted to override administratively " - "set MAC address\nReload the VF driver to " - "resume operations\n", vf); -#endif - break; - case E1000_VF_SET_PROMISC: - retval = igb_set_vf_promisc(adapter, msgbuf, vf); - break; - case E1000_VF_SET_MULTICAST: - retval = igb_set_vf_multicasts(adapter, msgbuf, vf); - break; - case E1000_VF_SET_LPE: - retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf); - break; - case E1000_VF_SET_VLAN: - retval = -1; -#ifdef IFLA_VF_MAX - if (vf_data->pf_vlan) - DPRINTK(DRV, INFO, - "VF %d attempted to override administratively " - "set VLAN tag\nReload the VF driver to " - "resume operations\n", vf); - else -#endif - retval = igb_set_vf_vlan(adapter, msgbuf, vf); - break; - default: - dev_err(pci_dev_to_dev(pdev), "Unhandled Msg %08x\n", msgbuf[0]); - retval = -E1000_ERR_MBX; - break; - } - - /* notify the VF of the results of what it sent us */ - if (retval) - msgbuf[0] |= E1000_VT_MSGTYPE_NACK; - else - msgbuf[0] |= E1000_VT_MSGTYPE_ACK; - - msgbuf[0] |= E1000_VT_MSGTYPE_CTS; - - e1000_write_mbx(hw, msgbuf, 1, vf); -} - -static void igb_msg_task(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 vf; - - for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { - /* process any reset requests */ - if (!e1000_check_for_rst(hw, vf)) - igb_vf_reset_event(adapter, vf); - - /* process any messages pending */ - if (!e1000_check_for_msg(hw, vf)) - igb_rcv_msg_from_vf(adapter, vf); - - /* process any acks */ - if (!e1000_check_for_ack(hw, vf)) - igb_rcv_ack_from_vf(adapter, vf); - } -} - -/** - * igb_set_uta - Set unicast filter table address - * @adapter: board private structure - * - * The unicast table address is a register array of 32-bit registers. - * The table is meant to be used in a way similar to how the MTA is used - * however due to certain limitations in the hardware it is necessary to - * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous - * enable bit to allow vlan tag stripping when promiscuous mode is enabled - **/ -static void igb_set_uta(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - /* The UTA table only exists on 82576 hardware and newer */ - if (hw->mac.type < e1000_82576) - return; - - /* we only need to do this if VMDq is enabled */ - if (!adapter->vmdq_pools) - return; - - for (i = 0; i < hw->mac.uta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, ~0); -} - -/** - * igb_intr_msi - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ -static irqreturn_t igb_intr_msi(int irq, void *data) -{ - struct igb_adapter *adapter = data; - struct igb_q_vector *q_vector = adapter->q_vector[0]; - struct e1000_hw *hw = &adapter->hw; - /* read ICR disables interrupts using IAM */ - u32 icr = E1000_READ_REG(hw, E1000_ICR); - - igb_write_itr(q_vector); - - if (icr & E1000_ICR_DRSTA) - schedule_work(&adapter->reset_task); - - if (icr & E1000_ICR_DOUTSYNC) { - /* HW is reporting DMA is out of sync */ - adapter->stats.doosync++; - } - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->mac.get_link_status = 1; - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - -#ifdef HAVE_PTP_1588_CLOCK - if (icr & E1000_ICR_TS) { - u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); - - if (tsicr & E1000_TSICR_TXTS) { - /* acknowledge the interrupt */ - E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); - /* retrieve hardware timestamp */ - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - napi_schedule(&q_vector->napi); - - return IRQ_HANDLED; -} - -/** - * igb_intr - Legacy Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ -static irqreturn_t igb_intr(int irq, void *data) -{ - struct igb_adapter *adapter = data; - struct igb_q_vector *q_vector = adapter->q_vector[0]; - struct e1000_hw *hw = &adapter->hw; - /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No - * need for the IMC write */ - u32 icr = E1000_READ_REG(hw, E1000_ICR); - - /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is - * not set, then the adapter didn't send an interrupt */ - if (!(icr & E1000_ICR_INT_ASSERTED)) - return IRQ_NONE; - - igb_write_itr(q_vector); - - if (icr & E1000_ICR_DRSTA) - schedule_work(&adapter->reset_task); - - if (icr & E1000_ICR_DOUTSYNC) { - /* HW is reporting DMA is out of sync */ - adapter->stats.doosync++; - } - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->mac.get_link_status = 1; - /* guard against interrupt when we're going down */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - -#ifdef HAVE_PTP_1588_CLOCK - if (icr & E1000_ICR_TS) { - u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); - - if (tsicr & E1000_TSICR_TXTS) { - /* acknowledge the interrupt */ - E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); - /* retrieve hardware timestamp */ - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - napi_schedule(&q_vector->napi); - - return IRQ_HANDLED; -} - -void igb_ring_irq_enable(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - struct e1000_hw *hw = &adapter->hw; - - if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) || - (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) { - if ((adapter->num_q_vectors == 1) && !adapter->vf_data) - igb_set_itr(q_vector); - else - igb_update_ring_itr(q_vector); - } - - if (!test_bit(__IGB_DOWN, &adapter->state)) { - if (adapter->msix_entries) - E1000_WRITE_REG(hw, E1000_EIMS, q_vector->eims_value); - else - igb_irq_enable(adapter); - } -} - -/** - * igb_poll - NAPI Rx polling callback - * @napi: napi polling structure - * @budget: count of how many packets we should handle - **/ -static int igb_poll(struct napi_struct *napi, int budget) -{ - struct igb_q_vector *q_vector = container_of(napi, struct igb_q_vector, napi); - bool clean_complete = true; - -#ifdef IGB_DCA - if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED) - igb_update_dca(q_vector); -#endif - if (q_vector->tx.ring) - clean_complete = igb_clean_tx_irq(q_vector); - - if (q_vector->rx.ring) - clean_complete &= igb_clean_rx_irq(q_vector, budget); - -#ifndef HAVE_NETDEV_NAPI_LIST - /* if netdev is disabled we need to stop polling */ - if (!netif_running(q_vector->adapter->netdev)) - clean_complete = true; - -#endif - /* If all work not completed, return budget and keep polling */ - if (!clean_complete) - return budget; - - /* If not enough Rx work done, exit the polling mode */ - napi_complete(napi); - igb_ring_irq_enable(q_vector); - - return 0; -} - -/** - * igb_clean_tx_irq - Reclaim resources after transmit completes - * @q_vector: pointer to q_vector containing needed info - * returns TRUE if ring is completely cleaned - **/ -static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - struct igb_ring *tx_ring = q_vector->tx.ring; - struct igb_tx_buffer *tx_buffer; - union e1000_adv_tx_desc *tx_desc; - unsigned int total_bytes = 0, total_packets = 0; - unsigned int budget = q_vector->tx.work_limit; - unsigned int i = tx_ring->next_to_clean; - - if (test_bit(__IGB_DOWN, &adapter->state)) - return true; - - tx_buffer = &tx_ring->tx_buffer_info[i]; - tx_desc = IGB_TX_DESC(tx_ring, i); - i -= tx_ring->count; - - do { - union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; - - /* if next_to_watch is not set then there is no work pending */ - if (!eop_desc) - break; - - /* prevent any other reads prior to eop_desc */ - read_barrier_depends(); - - /* if DD is not set pending work has not been completed */ - if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) - break; - - /* clear next_to_watch to prevent false hangs */ - tx_buffer->next_to_watch = NULL; - - /* update the statistics for this packet */ - total_bytes += tx_buffer->bytecount; - total_packets += tx_buffer->gso_segs; - - /* free the skb */ - dev_kfree_skb_any(tx_buffer->skb); - - /* unmap skb header data */ - dma_unmap_single(tx_ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - - /* clear tx_buffer data */ - tx_buffer->skb = NULL; - dma_unmap_len_set(tx_buffer, len, 0); - - /* clear last DMA location and unmap remaining buffers */ - while (tx_desc != eop_desc) { - tx_buffer++; - tx_desc++; - i++; - if (unlikely(!i)) { - i -= tx_ring->count; - tx_buffer = tx_ring->tx_buffer_info; - tx_desc = IGB_TX_DESC(tx_ring, 0); - } - - /* unmap any remaining paged data */ - if (dma_unmap_len(tx_buffer, len)) { - dma_unmap_page(tx_ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - dma_unmap_len_set(tx_buffer, len, 0); - } - } - - /* move us one more past the eop_desc for start of next pkt */ - tx_buffer++; - tx_desc++; - i++; - if (unlikely(!i)) { - i -= tx_ring->count; - tx_buffer = tx_ring->tx_buffer_info; - tx_desc = IGB_TX_DESC(tx_ring, 0); - } - - /* issue prefetch for next Tx descriptor */ - prefetch(tx_desc); - - /* update budget accounting */ - budget--; - } while (likely(budget)); - - netdev_tx_completed_queue(txring_txq(tx_ring), - total_packets, total_bytes); - - i += tx_ring->count; - tx_ring->next_to_clean = i; - tx_ring->tx_stats.bytes += total_bytes; - tx_ring->tx_stats.packets += total_packets; - q_vector->tx.total_bytes += total_bytes; - q_vector->tx.total_packets += total_packets; - -#ifdef DEBUG - if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags) && - !(adapter->disable_hw_reset && adapter->tx_hang_detected)) { -#else - if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) { -#endif - struct e1000_hw *hw = &adapter->hw; - - /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ - clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); - if (tx_buffer->next_to_watch && - time_after(jiffies, tx_buffer->time_stamp + - (adapter->tx_timeout_factor * HZ)) - && !(E1000_READ_REG(hw, E1000_STATUS) & - E1000_STATUS_TXOFF)) { - - /* detected Tx unit hang */ -#ifdef DEBUG - adapter->tx_hang_detected = TRUE; - if (adapter->disable_hw_reset) { - DPRINTK(DRV, WARNING, - "Deactivating netdev watchdog timer\n"); - if (del_timer(&netdev_ring(tx_ring)->watchdog_timer)) - dev_put(netdev_ring(tx_ring)); -#ifndef HAVE_NET_DEVICE_OPS - netdev_ring(tx_ring)->tx_timeout = NULL; -#endif - } -#endif /* DEBUG */ - dev_err(tx_ring->dev, - "Detected Tx Unit Hang\n" - " Tx Queue <%d>\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]\n" - " time_stamp <%lx>\n" - " next_to_watch <%p>\n" - " jiffies <%lx>\n" - " desc.status <%x>\n", - tx_ring->queue_index, - E1000_READ_REG(hw, E1000_TDH(tx_ring->reg_idx)), - readl(tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_buffer->time_stamp, - tx_buffer->next_to_watch, - jiffies, - tx_buffer->next_to_watch->wb.status); - if (netif_is_multiqueue(netdev_ring(tx_ring))) - netif_stop_subqueue(netdev_ring(tx_ring), - ring_queue_index(tx_ring)); - else - netif_stop_queue(netdev_ring(tx_ring)); - - /* we are about to reset, no point in enabling stuff */ - return true; - } - } - -#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) - if (unlikely(total_packets && - netif_carrier_ok(netdev_ring(tx_ring)) && - igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { - /* Make sure that anybody stopping the queue after this - * sees the new next_to_clean. - */ - smp_mb(); - if (netif_is_multiqueue(netdev_ring(tx_ring))) { - if (__netif_subqueue_stopped(netdev_ring(tx_ring), - ring_queue_index(tx_ring)) && - !(test_bit(__IGB_DOWN, &adapter->state))) { - netif_wake_subqueue(netdev_ring(tx_ring), - ring_queue_index(tx_ring)); - tx_ring->tx_stats.restart_queue++; - } - } else { - if (netif_queue_stopped(netdev_ring(tx_ring)) && - !(test_bit(__IGB_DOWN, &adapter->state))) { - netif_wake_queue(netdev_ring(tx_ring)); - tx_ring->tx_stats.restart_queue++; - } - } - } - - return !!budget; -} - -#ifdef HAVE_VLAN_RX_REGISTER -/** - * igb_receive_skb - helper function to handle rx indications - * @q_vector: structure containing interrupt and ring information - * @skb: packet to send up - **/ -static void igb_receive_skb(struct igb_q_vector *q_vector, - struct sk_buff *skb) -{ - struct vlan_group **vlgrp = netdev_priv(skb->dev); - - if (IGB_CB(skb)->vid) { - if (*vlgrp) { - vlan_gro_receive(&q_vector->napi, *vlgrp, - IGB_CB(skb)->vid, skb); - } else { - dev_kfree_skb_any(skb); - } - } else { - napi_gro_receive(&q_vector->napi, skb); - } -} - -#endif /* HAVE_VLAN_RX_REGISTER */ -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT -/** - * igb_reuse_rx_page - page flip buffer and store it back on the ring - * @rx_ring: rx descriptor ring to store buffers on - * @old_buff: donor buffer to have page reused - * - * Synchronizes page for reuse by the adapter - **/ -static void igb_reuse_rx_page(struct igb_ring *rx_ring, - struct igb_rx_buffer *old_buff) -{ - struct igb_rx_buffer *new_buff; - u16 nta = rx_ring->next_to_alloc; - - new_buff = &rx_ring->rx_buffer_info[nta]; - - /* update, and store next to alloc */ - nta++; - rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; - - /* transfer page from old buffer to new buffer */ - memcpy(new_buff, old_buff, sizeof(struct igb_rx_buffer)); - - /* sync the buffer for use by the device */ - dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma, - old_buff->page_offset, - IGB_RX_BUFSZ, - DMA_FROM_DEVICE); -} - -static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, - struct page *page, - unsigned int truesize) -{ - /* avoid re-using remote pages */ - if (unlikely(page_to_nid(page) != numa_node_id())) - return false; - -#if (PAGE_SIZE < 8192) - /* if we are only owner of page we can reuse it */ - if (unlikely(page_count(page) != 1)) - return false; - - /* flip page offset to other buffer */ - rx_buffer->page_offset ^= IGB_RX_BUFSZ; - -#else - /* move offset up to the next cache line */ - rx_buffer->page_offset += truesize; - - if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) - return false; -#endif - - /* bump ref count on page before it is given to the stack */ - get_page(page); - - return true; -} - -/** - * igb_add_rx_frag - Add contents of Rx buffer to sk_buff - * @rx_ring: rx descriptor ring to transact packets on - * @rx_buffer: buffer containing page to add - * @rx_desc: descriptor containing length of buffer written by hardware - * @skb: sk_buff to place the data into - * - * This function will add the data contained in rx_buffer->page to the skb. - * This is done either through a direct copy if the data in the buffer is - * less than the skb header size, otherwise it will just attach the page as - * a frag to the skb. - * - * The function will then update the page offset if necessary and return - * true if the buffer can be reused by the adapter. - **/ -static bool igb_add_rx_frag(struct igb_ring *rx_ring, - struct igb_rx_buffer *rx_buffer, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct page *page = rx_buffer->page; - unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); -#if (PAGE_SIZE < 8192) - unsigned int truesize = IGB_RX_BUFSZ; -#else - unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); -#endif - - if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) { - unsigned char *va = page_address(page) + rx_buffer->page_offset; - -#ifdef HAVE_PTP_1588_CLOCK - if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { - igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); - va += IGB_TS_HDR_LEN; - size -= IGB_TS_HDR_LEN; - } -#endif /* HAVE_PTP_1588_CLOCK */ - - memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long))); - - /* we can reuse buffer as-is, just make sure it is local */ - if (likely(page_to_nid(page) == numa_node_id())) - return true; - - /* this page cannot be reused so discard it */ - put_page(page); - return false; - } - - skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - rx_buffer->page_offset, size, truesize); - - return igb_can_reuse_rx_page(rx_buffer, page, truesize); -} - -static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct igb_rx_buffer *rx_buffer; - struct page *page; - - rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; - - page = rx_buffer->page; - prefetchw(page); - - if (likely(!skb)) { - void *page_addr = page_address(page) + - rx_buffer->page_offset; - - /* prefetch first cache line of first page */ - prefetch(page_addr); -#if L1_CACHE_BYTES < 128 - prefetch(page_addr + L1_CACHE_BYTES); -#endif - - /* allocate a skb to store the frags */ - skb = netdev_alloc_skb_ip_align(rx_ring->netdev, - IGB_RX_HDR_LEN); - if (unlikely(!skb)) { - rx_ring->rx_stats.alloc_failed++; - return NULL; - } - - /* - * we will be copying header into skb->data in - * pskb_may_pull so it is in our interest to prefetch - * it now to avoid a possible cache miss - */ - prefetchw(skb->data); - } - - /* we are reusing so sync this buffer for CPU use */ - dma_sync_single_range_for_cpu(rx_ring->dev, - rx_buffer->dma, - rx_buffer->page_offset, - IGB_RX_BUFSZ, - DMA_FROM_DEVICE); - - /* pull page into skb */ - if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) { - /* hand second half of page back to the ring */ - igb_reuse_rx_page(rx_ring, rx_buffer); - } else { - /* we are not reusing the buffer so unmap it */ - dma_unmap_page(rx_ring->dev, rx_buffer->dma, - PAGE_SIZE, DMA_FROM_DEVICE); - } - - /* clear contents of rx_buffer */ - rx_buffer->page = NULL; - - return skb; -} - -#endif -static inline void igb_rx_checksum(struct igb_ring *ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - skb_checksum_none_assert(skb); - - /* Ignore Checksum bit is set */ - if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM)) - return; - - /* Rx checksum disabled via ethtool */ - if (!(netdev_ring(ring)->features & NETIF_F_RXCSUM)) - return; - - /* TCP/UDP checksum error bit is set */ - if (igb_test_staterr(rx_desc, - E1000_RXDEXT_STATERR_TCPE | - E1000_RXDEXT_STATERR_IPE)) { - /* - * work around errata with sctp packets where the TCPE aka - * L4E bit is set incorrectly on 64 byte (60 byte w/o crc) - * packets, (aka let the stack check the crc32c) - */ - if (!((skb->len == 60) && - test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) - ring->rx_stats.csum_err++; - - /* let the stack verify checksum errors */ - return; - } - /* It must be a TCP or UDP packet with a valid checksum */ - if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS | - E1000_RXD_STAT_UDPCS)) - skb->ip_summed = CHECKSUM_UNNECESSARY; -} - -#ifdef NETIF_F_RXHASH -static inline void igb_rx_hash(struct igb_ring *ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - if (netdev_ring(ring)->features & NETIF_F_RXHASH) - skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), - PKT_HASH_TYPE_L3); -} - -#endif -#ifndef IGB_NO_LRO -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT -/** - * igb_merge_active_tail - merge active tail into lro skb - * @tail: pointer to active tail in frag_list - * - * This function merges the length and data of an active tail into the - * skb containing the frag_list. It resets the tail's pointer to the head, - * but it leaves the heads pointer to tail intact. - **/ -static inline struct sk_buff *igb_merge_active_tail(struct sk_buff *tail) -{ - struct sk_buff *head = IGB_CB(tail)->head; - - if (!head) - return tail; - - head->len += tail->len; - head->data_len += tail->len; - head->truesize += tail->len; - - IGB_CB(tail)->head = NULL; - - return head; -} - -/** - * igb_add_active_tail - adds an active tail into the skb frag_list - * @head: pointer to the start of the skb - * @tail: pointer to active tail to add to frag_list - * - * This function adds an active tail to the end of the frag list. This tail - * will still be receiving data so we cannot yet ad it's stats to the main - * skb. That is done via igb_merge_active_tail. - **/ -static inline void igb_add_active_tail(struct sk_buff *head, struct sk_buff *tail) -{ - struct sk_buff *old_tail = IGB_CB(head)->tail; - - if (old_tail) { - igb_merge_active_tail(old_tail); - old_tail->next = tail; - } else { - skb_shinfo(head)->frag_list = tail; - } - - IGB_CB(tail)->head = head; - IGB_CB(head)->tail = tail; - - IGB_CB(head)->append_cnt++; -} - -/** - * igb_close_active_frag_list - cleanup pointers on a frag_list skb - * @head: pointer to head of an active frag list - * - * This function will clear the frag_tail_tracker pointer on an active - * frag_list and returns true if the pointer was actually set - **/ -static inline bool igb_close_active_frag_list(struct sk_buff *head) -{ - struct sk_buff *tail = IGB_CB(head)->tail; - - if (!tail) - return false; - - igb_merge_active_tail(tail); - - IGB_CB(head)->tail = NULL; - - return true; -} - -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_can_lro - returns true if packet is TCP/IPV4 and LRO is enabled - * @adapter: board private structure - * @rx_desc: pointer to the rx descriptor - * @skb: pointer to the skb to be merged - * - **/ -static inline bool igb_can_lro(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct iphdr *iph = (struct iphdr *)skb->data; - __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; - - /* verify hardware indicates this is IPv4/TCP */ - if((!(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) || - !(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)))) - return false; - - /* .. and LRO is enabled */ - if (!(netdev_ring(rx_ring)->features & NETIF_F_LRO)) - return false; - - /* .. and we are not in promiscuous mode */ - if (netdev_ring(rx_ring)->flags & IFF_PROMISC) - return false; - - /* .. and the header is large enough for us to read IP/TCP fields */ - if (!pskb_may_pull(skb, sizeof(struct igb_lrohdr))) - return false; - - /* .. and there are no VLANs on packet */ - if (skb->protocol != __constant_htons(ETH_P_IP)) - return false; - - /* .. and we are version 4 with no options */ - if (*(u8 *)iph != 0x45) - return false; - - /* .. and the packet is not fragmented */ - if (iph->frag_off & htons(IP_MF | IP_OFFSET)) - return false; - - /* .. and that next header is TCP */ - if (iph->protocol != IPPROTO_TCP) - return false; - - return true; -} - -static inline struct igb_lrohdr *igb_lro_hdr(struct sk_buff *skb) -{ - return (struct igb_lrohdr *)skb->data; -} - -/** - * igb_lro_flush - Indicate packets to upper layer. - * - * Update IP and TCP header part of head skb if more than one - * skb's chained and indicate packets to upper layer. - **/ -static void igb_lro_flush(struct igb_q_vector *q_vector, - struct sk_buff *skb) -{ - struct igb_lro_list *lrolist = &q_vector->lrolist; - - __skb_unlink(skb, &lrolist->active); - - if (IGB_CB(skb)->append_cnt) { - struct igb_lrohdr *lroh = igb_lro_hdr(skb); - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* close any active lro contexts */ - igb_close_active_frag_list(skb); - -#endif - /* incorporate ip header and re-calculate checksum */ - lroh->iph.tot_len = ntohs(skb->len); - lroh->iph.check = 0; - - /* header length is 5 since we know no options exist */ - lroh->iph.check = ip_fast_csum((u8 *)lroh, 5); - - /* clear TCP checksum to indicate we are an LRO frame */ - lroh->th.check = 0; - - /* incorporate latest timestamp into the tcp header */ - if (IGB_CB(skb)->tsecr) { - lroh->ts[2] = IGB_CB(skb)->tsecr; - lroh->ts[1] = htonl(IGB_CB(skb)->tsval); - } -#ifdef NETIF_F_GSO - - skb_shinfo(skb)->gso_size = IGB_CB(skb)->mss; - skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; -#endif - } - -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, skb); -#else - napi_gro_receive(&q_vector->napi, skb); -#endif - lrolist->stats.flushed++; -} - -static void igb_lro_flush_all(struct igb_q_vector *q_vector) -{ - struct igb_lro_list *lrolist = &q_vector->lrolist; - struct sk_buff *skb, *tmp; - - skb_queue_reverse_walk_safe(&lrolist->active, skb, tmp) - igb_lro_flush(q_vector, skb); -} - -/* - * igb_lro_header_ok - Main LRO function. - **/ -static void igb_lro_header_ok(struct sk_buff *skb) -{ - struct igb_lrohdr *lroh = igb_lro_hdr(skb); - u16 opt_bytes, data_len; - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - IGB_CB(skb)->tail = NULL; -#endif - IGB_CB(skb)->tsecr = 0; - IGB_CB(skb)->append_cnt = 0; - IGB_CB(skb)->mss = 0; - - /* ensure that the checksum is valid */ - if (skb->ip_summed != CHECKSUM_UNNECESSARY) - return; - - /* If we see CE codepoint in IP header, packet is not mergeable */ - if (INET_ECN_is_ce(ipv4_get_dsfield(&lroh->iph))) - return; - - /* ensure no bits set besides ack or psh */ - if (lroh->th.fin || lroh->th.syn || lroh->th.rst || - lroh->th.urg || lroh->th.ece || lroh->th.cwr || - !lroh->th.ack) - return; - - /* store the total packet length */ - data_len = ntohs(lroh->iph.tot_len); - - /* remove any padding from the end of the skb */ - __pskb_trim(skb, data_len); - - /* remove header length from data length */ - data_len -= sizeof(struct igb_lrohdr); - - /* - * check for timestamps. Since the only option we handle are timestamps, - * we only have to handle the simple case of aligned timestamps - */ - opt_bytes = (lroh->th.doff << 2) - sizeof(struct tcphdr); - if (opt_bytes != 0) { - if ((opt_bytes != TCPOLEN_TSTAMP_ALIGNED) || - !pskb_may_pull(skb, sizeof(struct igb_lrohdr) + - TCPOLEN_TSTAMP_ALIGNED) || - (lroh->ts[0] != htonl((TCPOPT_NOP << 24) | - (TCPOPT_NOP << 16) | - (TCPOPT_TIMESTAMP << 8) | - TCPOLEN_TIMESTAMP)) || - (lroh->ts[2] == 0)) { - return; - } - - IGB_CB(skb)->tsval = ntohl(lroh->ts[1]); - IGB_CB(skb)->tsecr = lroh->ts[2]; - - data_len -= TCPOLEN_TSTAMP_ALIGNED; - } - - /* record data_len as mss for the packet */ - IGB_CB(skb)->mss = data_len; - IGB_CB(skb)->next_seq = ntohl(lroh->th.seq); -} - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT -static void igb_merge_frags(struct sk_buff *lro_skb, struct sk_buff *new_skb) -{ - struct skb_shared_info *sh_info; - struct skb_shared_info *new_skb_info; - unsigned int data_len; - - sh_info = skb_shinfo(lro_skb); - new_skb_info = skb_shinfo(new_skb); - - /* copy frags into the last skb */ - memcpy(sh_info->frags + sh_info->nr_frags, - new_skb_info->frags, - new_skb_info->nr_frags * sizeof(skb_frag_t)); - - /* copy size data over */ - sh_info->nr_frags += new_skb_info->nr_frags; - data_len = IGB_CB(new_skb)->mss; - lro_skb->len += data_len; - lro_skb->data_len += data_len; - lro_skb->truesize += data_len; - - /* wipe record of data from new_skb */ - new_skb_info->nr_frags = 0; - new_skb->len = new_skb->data_len = 0; - dev_kfree_skb_any(new_skb); -} - -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_lro_receive - if able, queue skb into lro chain - * @q_vector: structure containing interrupt and ring information - * @new_skb: pointer to current skb being checked - * - * Checks whether the skb given is eligible for LRO and if that's - * fine chains it to the existing lro_skb based on flowid. If an LRO for - * the flow doesn't exist create one. - **/ -static void igb_lro_receive(struct igb_q_vector *q_vector, - struct sk_buff *new_skb) -{ - struct sk_buff *lro_skb; - struct igb_lro_list *lrolist = &q_vector->lrolist; - struct igb_lrohdr *lroh = igb_lro_hdr(new_skb); - __be32 saddr = lroh->iph.saddr; - __be32 daddr = lroh->iph.daddr; - __be32 tcp_ports = *(__be32 *)&lroh->th; - u16 data_len; -#ifdef HAVE_VLAN_RX_REGISTER - u16 vid = IGB_CB(new_skb)->vid; -#else - u16 vid = new_skb->vlan_tci; -#endif - - igb_lro_header_ok(new_skb); - - /* - * we have a packet that might be eligible for LRO, - * so see if it matches anything we might expect - */ - skb_queue_walk(&lrolist->active, lro_skb) { - if (*(__be32 *)&igb_lro_hdr(lro_skb)->th != tcp_ports || - igb_lro_hdr(lro_skb)->iph.saddr != saddr || - igb_lro_hdr(lro_skb)->iph.daddr != daddr) - continue; - -#ifdef HAVE_VLAN_RX_REGISTER - if (IGB_CB(lro_skb)->vid != vid) -#else - if (lro_skb->vlan_tci != vid) -#endif - continue; - - /* out of order packet */ - if (IGB_CB(lro_skb)->next_seq != IGB_CB(new_skb)->next_seq) { - igb_lro_flush(q_vector, lro_skb); - IGB_CB(new_skb)->mss = 0; - break; - } - - /* TCP timestamp options have changed */ - if (!IGB_CB(lro_skb)->tsecr != !IGB_CB(new_skb)->tsecr) { - igb_lro_flush(q_vector, lro_skb); - break; - } - - /* make sure timestamp values are increasing */ - if (IGB_CB(lro_skb)->tsecr && - IGB_CB(lro_skb)->tsval > IGB_CB(new_skb)->tsval) { - igb_lro_flush(q_vector, lro_skb); - IGB_CB(new_skb)->mss = 0; - break; - } - - data_len = IGB_CB(new_skb)->mss; - - /* Check for all of the above below - * malformed header - * no tcp data - * resultant packet would be too large - * new skb is larger than our current mss - * data would remain in header - * we would consume more frags then the sk_buff contains - * ack sequence numbers changed - * window size has changed - */ - if (data_len == 0 || - data_len > IGB_CB(lro_skb)->mss || - data_len > IGB_CB(lro_skb)->free || -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - data_len != new_skb->data_len || - skb_shinfo(new_skb)->nr_frags >= - (MAX_SKB_FRAGS - skb_shinfo(lro_skb)->nr_frags) || -#endif - igb_lro_hdr(lro_skb)->th.ack_seq != lroh->th.ack_seq || - igb_lro_hdr(lro_skb)->th.window != lroh->th.window) { - igb_lro_flush(q_vector, lro_skb); - break; - } - - /* Remove IP and TCP header*/ - skb_pull(new_skb, new_skb->len - data_len); - - /* update timestamp and timestamp echo response */ - IGB_CB(lro_skb)->tsval = IGB_CB(new_skb)->tsval; - IGB_CB(lro_skb)->tsecr = IGB_CB(new_skb)->tsecr; - - /* update sequence and free space */ - IGB_CB(lro_skb)->next_seq += data_len; - IGB_CB(lro_skb)->free -= data_len; - - /* update append_cnt */ - IGB_CB(lro_skb)->append_cnt++; - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* if header is empty pull pages into current skb */ - igb_merge_frags(lro_skb, new_skb); -#else - /* chain this new skb in frag_list */ - igb_add_active_tail(lro_skb, new_skb); -#endif - - if ((data_len < IGB_CB(lro_skb)->mss) || lroh->th.psh || - skb_shinfo(lro_skb)->nr_frags == MAX_SKB_FRAGS) { - igb_lro_hdr(lro_skb)->th.psh |= lroh->th.psh; - igb_lro_flush(q_vector, lro_skb); - } - - lrolist->stats.coal++; - return; - } - - if (IGB_CB(new_skb)->mss && !lroh->th.psh) { - /* if we are at capacity flush the tail */ - if (skb_queue_len(&lrolist->active) >= IGB_LRO_MAX) { - lro_skb = skb_peek_tail(&lrolist->active); - if (lro_skb) - igb_lro_flush(q_vector, lro_skb); - } - - /* update sequence and free space */ - IGB_CB(new_skb)->next_seq += IGB_CB(new_skb)->mss; - IGB_CB(new_skb)->free = 65521 - new_skb->len; - - /* .. and insert at the front of the active list */ - __skb_queue_head(&lrolist->active, new_skb); - - lrolist->stats.coal++; - return; - } - - /* packet not handled by any of the above, pass it to the stack */ -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, new_skb); -#else - napi_gro_receive(&q_vector->napi, new_skb); -#endif -} - -#endif /* IGB_NO_LRO */ -/** - * igb_process_skb_fields - Populate skb header fields from Rx descriptor - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being populated - * - * This function checks the ring, descriptor, and packet information in - * order to populate the hash, checksum, VLAN, timestamp, protocol, and - * other fields within the skb. - **/ -static void igb_process_skb_fields(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct net_device *dev = rx_ring->netdev; - __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; - -#ifdef NETIF_F_RXHASH - igb_rx_hash(rx_ring, rx_desc, skb); - -#endif - igb_rx_checksum(rx_ring, rx_desc, skb); - - /* update packet type stats */ - if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)) - rx_ring->rx_stats.ipv4_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4_EX)) - rx_ring->rx_stats.ipv4e_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6)) - rx_ring->rx_stats.ipv6_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6_EX)) - rx_ring->rx_stats.ipv6e_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) - rx_ring->rx_stats.tcp_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_UDP)) - rx_ring->rx_stats.udp_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_SCTP)) - rx_ring->rx_stats.sctp_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_NFS)) - rx_ring->rx_stats.nfs_packets++; - -#ifdef HAVE_PTP_1588_CLOCK - igb_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); -#endif /* HAVE_PTP_1588_CLOCK */ - -#ifdef NETIF_F_HW_VLAN_CTAG_RX - if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && -#else - if ((dev->features & NETIF_F_HW_VLAN_RX) && -#endif - igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) { - u16 vid = 0; - if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) && - test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags)) - vid = be16_to_cpu(rx_desc->wb.upper.vlan); - else - vid = le16_to_cpu(rx_desc->wb.upper.vlan); -#ifdef HAVE_VLAN_RX_REGISTER - IGB_CB(skb)->vid = vid; - } else { - IGB_CB(skb)->vid = 0; -#else - -#ifdef HAVE_VLAN_PROTOCOL - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); -#else - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); -#endif - - -#endif - } - - skb_record_rx_queue(skb, rx_ring->queue_index); - - skb->protocol = eth_type_trans(skb, dev); -} - -/** - * igb_is_non_eop - process handling of non-EOP buffers - * @rx_ring: Rx ring being processed - * @rx_desc: Rx descriptor for current buffer - * - * This function updates next to clean. If the buffer is an EOP buffer - * this function exits returning false, otherwise it will place the - * sk_buff in the next buffer to be chained and return true indicating - * that this is in fact a non-EOP buffer. - **/ -static bool igb_is_non_eop(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc) -{ - u32 ntc = rx_ring->next_to_clean + 1; - - /* fetch, update, and store next to clean */ - ntc = (ntc < rx_ring->count) ? ntc : 0; - rx_ring->next_to_clean = ntc; - - prefetch(IGB_RX_DESC(rx_ring, ntc)); - - if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))) - return false; - - return true; -} - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT -/* igb_clean_rx_irq -- * legacy */ -static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) -{ - struct igb_ring *rx_ring = q_vector->rx.ring; - unsigned int total_bytes = 0, total_packets = 0; - u16 cleaned_count = igb_desc_unused(rx_ring); - - do { - struct igb_rx_buffer *rx_buffer; - union e1000_adv_rx_desc *rx_desc; - struct sk_buff *skb; - u16 ntc; - - /* return some buffers to hardware, one at a time is too slow */ - if (cleaned_count >= IGB_RX_BUFFER_WRITE) { - igb_alloc_rx_buffers(rx_ring, cleaned_count); - cleaned_count = 0; - } - - ntc = rx_ring->next_to_clean; - rx_desc = IGB_RX_DESC(rx_ring, ntc); - rx_buffer = &rx_ring->rx_buffer_info[ntc]; - - if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) - break; - - /* - * This memory barrier is needed to keep us from reading - * any other fields out of the rx_desc until we know the - * RXD_STAT_DD bit is set - */ - rmb(); - - skb = rx_buffer->skb; - - prefetch(skb->data); - - /* pull the header of the skb in */ - __skb_put(skb, le16_to_cpu(rx_desc->wb.upper.length)); - - /* clear skb reference in buffer info structure */ - rx_buffer->skb = NULL; - - cleaned_count++; - - BUG_ON(igb_is_non_eop(rx_ring, rx_desc)); - - dma_unmap_single(rx_ring->dev, rx_buffer->dma, - rx_ring->rx_buffer_len, - DMA_FROM_DEVICE); - rx_buffer->dma = 0; - - if (igb_test_staterr(rx_desc, - E1000_RXDEXT_ERR_FRAME_ERR_MASK)) { - dev_kfree_skb_any(skb); - continue; - } - - total_bytes += skb->len; - - /* populate checksum, timestamp, VLAN, and protocol */ - igb_process_skb_fields(rx_ring, rx_desc, skb); - -#ifndef IGB_NO_LRO - if (igb_can_lro(rx_ring, rx_desc, skb)) - igb_lro_receive(q_vector, skb); - else -#endif -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, skb); -#else - napi_gro_receive(&q_vector->napi, skb); -#endif - -#ifndef NETIF_F_GRO - netdev_ring(rx_ring)->last_rx = jiffies; - -#endif - /* update budget accounting */ - total_packets++; - } while (likely(total_packets < budget)); - - rx_ring->rx_stats.packets += total_packets; - rx_ring->rx_stats.bytes += total_bytes; - q_vector->rx.total_packets += total_packets; - q_vector->rx.total_bytes += total_bytes; - - if (cleaned_count) - igb_alloc_rx_buffers(rx_ring, cleaned_count); - -#ifndef IGB_NO_LRO - igb_lro_flush_all(q_vector); - -#endif /* IGB_NO_LRO */ - return total_packets < budget; -} -#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_get_headlen - determine size of header for LRO/GRO - * @data: pointer to the start of the headers - * @max_len: total length of section to find headers in - * - * This function is meant to determine the length of headers that will - * be recognized by hardware for LRO, and GRO offloads. The main - * motivation of doing this is to only perform one pull for IPv4 TCP - * packets so that we can do basic things like calculating the gso_size - * based on the average data per packet. - **/ -static unsigned int igb_get_headlen(unsigned char *data, - unsigned int max_len) -{ - union { - unsigned char *network; - /* l2 headers */ - struct ethhdr *eth; - struct vlan_hdr *vlan; - /* l3 headers */ - struct iphdr *ipv4; - struct ipv6hdr *ipv6; - } hdr; - __be16 protocol; - u8 nexthdr = 0; /* default to not TCP */ - u8 hlen; - - /* this should never happen, but better safe than sorry */ - if (max_len < ETH_HLEN) - return max_len; - - /* initialize network frame pointer */ - hdr.network = data; - - /* set first protocol and move network header forward */ - protocol = hdr.eth->h_proto; - hdr.network += ETH_HLEN; - - /* handle any vlan tag if present */ - if (protocol == __constant_htons(ETH_P_8021Q)) { - if ((hdr.network - data) > (max_len - VLAN_HLEN)) - return max_len; - - protocol = hdr.vlan->h_vlan_encapsulated_proto; - hdr.network += VLAN_HLEN; - } - - /* handle L3 protocols */ - if (protocol == __constant_htons(ETH_P_IP)) { - if ((hdr.network - data) > (max_len - sizeof(struct iphdr))) - return max_len; - - /* access ihl as a u8 to avoid unaligned access on ia64 */ - hlen = (hdr.network[0] & 0x0F) << 2; - - /* verify hlen meets minimum size requirements */ - if (hlen < sizeof(struct iphdr)) - return hdr.network - data; - - /* record next protocol if header is present */ - if (!(hdr.ipv4->frag_off & htons(IP_OFFSET))) - nexthdr = hdr.ipv4->protocol; -#ifdef NETIF_F_TSO6 - } else if (protocol == __constant_htons(ETH_P_IPV6)) { - if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr))) - return max_len; - - /* record next protocol */ - nexthdr = hdr.ipv6->nexthdr; - hlen = sizeof(struct ipv6hdr); -#endif /* NETIF_F_TSO6 */ - } else { - return hdr.network - data; - } - - /* relocate pointer to start of L4 header */ - hdr.network += hlen; - - /* finally sort out TCP */ - if (nexthdr == IPPROTO_TCP) { - if ((hdr.network - data) > (max_len - sizeof(struct tcphdr))) - return max_len; - - /* access doff as a u8 to avoid unaligned access on ia64 */ - hlen = (hdr.network[12] & 0xF0) >> 2; - - /* verify hlen meets minimum size requirements */ - if (hlen < sizeof(struct tcphdr)) - return hdr.network - data; - - hdr.network += hlen; - } else if (nexthdr == IPPROTO_UDP) { - if ((hdr.network - data) > (max_len - sizeof(struct udphdr))) - return max_len; - - hdr.network += sizeof(struct udphdr); - } - - /* - * If everything has gone correctly hdr.network should be the - * data section of the packet and will be the end of the header. - * If not then it probably represents the end of the last recognized - * header. - */ - if ((hdr.network - data) < max_len) - return hdr.network - data; - else - return max_len; -} - -/** - * igb_pull_tail - igb specific version of skb_pull_tail - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being adjusted - * - * This function is an igb specific version of __pskb_pull_tail. The - * main difference between this version and the original function is that - * this function can make several assumptions about the state of things - * that allow for significant optimizations versus the standard function. - * As a result we can do things like drop a frag and maintain an accurate - * truesize for the skb. - */ -static void igb_pull_tail(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; - unsigned char *va; - unsigned int pull_len; - - /* - * it is valid to use page_address instead of kmap since we are - * working with pages allocated out of the lomem pool per - * alloc_page(GFP_ATOMIC) - */ - va = skb_frag_address(frag); - -#ifdef HAVE_PTP_1588_CLOCK - if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { - /* retrieve timestamp from buffer */ - igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); - - /* update pointers to remove timestamp header */ - skb_frag_size_sub(frag, IGB_TS_HDR_LEN); - frag->page_offset += IGB_TS_HDR_LEN; - skb->data_len -= IGB_TS_HDR_LEN; - skb->len -= IGB_TS_HDR_LEN; - - /* move va to start of packet data */ - va += IGB_TS_HDR_LEN; - } -#endif /* HAVE_PTP_1588_CLOCK */ - - /* - * we need the header to contain the greater of either ETH_HLEN or - * 60 bytes if the skb->len is less than 60 for skb_pad. - */ - pull_len = igb_get_headlen(va, IGB_RX_HDR_LEN); - - /* align pull length to size of long to optimize memcpy performance */ - skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); - - /* update all of the pointers */ - skb_frag_size_sub(frag, pull_len); - frag->page_offset += pull_len; - skb->data_len -= pull_len; - skb->tail += pull_len; -} - -/** - * igb_cleanup_headers - Correct corrupted or empty headers - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being fixed - * - * Address the case where we are pulling data in on pages only - * and as such no data is present in the skb header. - * - * In addition if skb is not at least 60 bytes we need to pad it so that - * it is large enough to qualify as a valid Ethernet frame. - * - * Returns true if an error was encountered and skb was freed. - **/ -static bool igb_cleanup_headers(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - - if (unlikely((igb_test_staterr(rx_desc, - E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) { - struct net_device *netdev = rx_ring->netdev; - if (!(netdev->features & NETIF_F_RXALL)) { - dev_kfree_skb_any(skb); - return true; - } - } - - /* place header in linear portion of buffer */ - if (skb_is_nonlinear(skb)) - igb_pull_tail(rx_ring, rx_desc, skb); - - /* if skb_pad returns an error the skb was freed */ - if (unlikely(skb->len < 60)) { - int pad_len = 60 - skb->len; - - if (skb_pad(skb, pad_len)) - return true; - __skb_put(skb, pad_len); - } - - return false; -} - -/* igb_clean_rx_irq -- * packet split */ -static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) -{ - struct igb_ring *rx_ring = q_vector->rx.ring; - struct sk_buff *skb = rx_ring->skb; - unsigned int total_bytes = 0, total_packets = 0; - u16 cleaned_count = igb_desc_unused(rx_ring); - - do { - union e1000_adv_rx_desc *rx_desc; - - /* return some buffers to hardware, one at a time is too slow */ - if (cleaned_count >= IGB_RX_BUFFER_WRITE) { - igb_alloc_rx_buffers(rx_ring, cleaned_count); - cleaned_count = 0; - } - - rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean); - - if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) - break; - - /* - * This memory barrier is needed to keep us from reading - * any other fields out of the rx_desc until we know the - * RXD_STAT_DD bit is set - */ - rmb(); - - /* retrieve a buffer from the ring */ - skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); - - /* exit if we failed to retrieve a buffer */ - if (!skb) - break; - - cleaned_count++; - - /* fetch next buffer in frame if non-eop */ - if (igb_is_non_eop(rx_ring, rx_desc)) - continue; - - /* verify the packet layout is correct */ - if (igb_cleanup_headers(rx_ring, rx_desc, skb)) { - skb = NULL; - continue; - } - - /* probably a little skewed due to removing CRC */ - total_bytes += skb->len; - - /* populate checksum, timestamp, VLAN, and protocol */ - igb_process_skb_fields(rx_ring, rx_desc, skb); - -#ifndef IGB_NO_LRO - if (igb_can_lro(rx_ring, rx_desc, skb)) - igb_lro_receive(q_vector, skb); - else -#endif -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, skb); -#else - napi_gro_receive(&q_vector->napi, skb); -#endif -#ifndef NETIF_F_GRO - - netdev_ring(rx_ring)->last_rx = jiffies; -#endif - - /* reset skb pointer */ - skb = NULL; - - /* update budget accounting */ - total_packets++; - } while (likely(total_packets < budget)); - - /* place incomplete frames back on ring for completion */ - rx_ring->skb = skb; - - rx_ring->rx_stats.packets += total_packets; - rx_ring->rx_stats.bytes += total_bytes; - q_vector->rx.total_packets += total_packets; - q_vector->rx.total_bytes += total_bytes; - - if (cleaned_count) - igb_alloc_rx_buffers(rx_ring, cleaned_count); - -#ifndef IGB_NO_LRO - igb_lro_flush_all(q_vector); - -#endif /* IGB_NO_LRO */ - return total_packets < budget; -} -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT -static bool igb_alloc_mapped_skb(struct igb_ring *rx_ring, - struct igb_rx_buffer *bi) -{ - struct sk_buff *skb = bi->skb; - dma_addr_t dma = bi->dma; - - if (dma) - return true; - - if (likely(!skb)) { - skb = netdev_alloc_skb_ip_align(netdev_ring(rx_ring), - rx_ring->rx_buffer_len); - bi->skb = skb; - if (!skb) { - rx_ring->rx_stats.alloc_failed++; - return false; - } - - /* initialize skb for ring */ - skb_record_rx_queue(skb, ring_queue_index(rx_ring)); - } - - dma = dma_map_single(rx_ring->dev, skb->data, - rx_ring->rx_buffer_len, DMA_FROM_DEVICE); - - /* if mapping failed free memory back to system since - * there isn't much point in holding memory we can't use - */ - if (dma_mapping_error(rx_ring->dev, dma)) { - dev_kfree_skb_any(skb); - bi->skb = NULL; - - rx_ring->rx_stats.alloc_failed++; - return false; - } - - bi->dma = dma; - return true; -} - -#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, - struct igb_rx_buffer *bi) -{ - struct page *page = bi->page; - dma_addr_t dma; - - /* since we are recycling buffers we should seldom need to alloc */ - if (likely(page)) - return true; - - /* alloc new page for storage */ - page = alloc_page(GFP_ATOMIC | __GFP_COLD); - if (unlikely(!page)) { - rx_ring->rx_stats.alloc_failed++; - return false; - } - - /* map page for use */ - dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE); - - /* - * if mapping failed free memory back to system since - * there isn't much point in holding memory we can't use - */ - if (dma_mapping_error(rx_ring->dev, dma)) { - __free_page(page); - - rx_ring->rx_stats.alloc_failed++; - return false; - } - - bi->dma = dma; - bi->page = page; - bi->page_offset = 0; - - return true; -} - -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_alloc_rx_buffers - Replace used receive buffers; packet split - * @adapter: address of board private structure - **/ -void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) -{ - union e1000_adv_rx_desc *rx_desc; - struct igb_rx_buffer *bi; - u16 i = rx_ring->next_to_use; - - /* nothing to do */ - if (!cleaned_count) - return; - - rx_desc = IGB_RX_DESC(rx_ring, i); - bi = &rx_ring->rx_buffer_info[i]; - i -= rx_ring->count; - - do { -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - if (!igb_alloc_mapped_skb(rx_ring, bi)) -#else - if (!igb_alloc_mapped_page(rx_ring, bi)) -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - break; - - /* - * Refresh the desc even if buffer_addrs didn't change - * because each write-back erases this info. - */ -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - rx_desc->read.pkt_addr = cpu_to_le64(bi->dma); -#else - rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); -#endif - - rx_desc++; - bi++; - i++; - if (unlikely(!i)) { - rx_desc = IGB_RX_DESC(rx_ring, 0); - bi = rx_ring->rx_buffer_info; - i -= rx_ring->count; - } - - /* clear the hdr_addr for the next_to_use descriptor */ - rx_desc->read.hdr_addr = 0; - - cleaned_count--; - } while (cleaned_count); - - i += rx_ring->count; - - if (rx_ring->next_to_use != i) { - /* record the next descriptor to use */ - rx_ring->next_to_use = i; - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* update next to alloc since we have filled the ring */ - rx_ring->next_to_alloc = i; - -#endif - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - writel(i, rx_ring->tail); - } -} - -#ifdef SIOCGMIIPHY -/** - * igb_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - **/ -static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct mii_ioctl_data *data = if_mii(ifr); - - if (adapter->hw.phy.media_type != e1000_media_type_copper) - return -EOPNOTSUPP; - - switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = adapter->hw.phy.addr; - break; - case SIOCGMIIREG: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, - &data->val_out)) - return -EIO; - break; - case SIOCSMIIREG: - default: - return -EOPNOTSUPP; - } - return E1000_SUCCESS; -} - -#endif -/** - * igb_ioctl - - * @netdev: - * @ifreq: - * @cmd: - **/ -static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - switch (cmd) { -#ifdef SIOCGMIIPHY - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return igb_mii_ioctl(netdev, ifr, cmd); -#endif -#ifdef HAVE_PTP_1588_CLOCK - case SIOCSHWTSTAMP: - return igb_ptp_hwtstamp_ioctl(netdev, ifr, cmd); -#endif /* HAVE_PTP_1588_CLOCK */ -#ifdef ETHTOOL_OPS_COMPAT - case SIOCETHTOOL: - return ethtool_ioctl(ifr); -#endif - default: - return -EOPNOTSUPP; - } -} - -s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) -{ - struct igb_adapter *adapter = hw->back; - u16 cap_offset; - - cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); - if (!cap_offset) - return -E1000_ERR_CONFIG; - - pci_read_config_word(adapter->pdev, cap_offset + reg, value); - - return E1000_SUCCESS; -} - -s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) -{ - struct igb_adapter *adapter = hw->back; - u16 cap_offset; - - cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); - if (!cap_offset) - return -E1000_ERR_CONFIG; - - pci_write_config_word(adapter->pdev, cap_offset + reg, *value); - - return E1000_SUCCESS; -} - -#ifdef HAVE_VLAN_RX_REGISTER -static void igb_vlan_mode(struct net_device *netdev, struct vlan_group *vlgrp) -#else -void igb_vlan_mode(struct net_device *netdev, u32 features) -#endif -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, rctl; - int i; -#ifdef HAVE_VLAN_RX_REGISTER - bool enable = !!vlgrp; - - igb_irq_disable(adapter); - - adapter->vlgrp = vlgrp; - - if (!test_bit(__IGB_DOWN, &adapter->state)) - igb_irq_enable(adapter); -#else -#ifdef NETIF_F_HW_VLAN_CTAG_RX - bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX); -#else - bool enable = !!(features & NETIF_F_HW_VLAN_RX); -#endif -#endif - - if (enable) { - /* enable VLAN tag insert/strip */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= E1000_CTRL_VME; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Disable CFI check */ - rctl = E1000_READ_REG(hw, E1000_RCTL); - rctl &= ~E1000_RCTL_CFIEN; - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - } else { - /* disable VLAN tag insert/strip */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl &= ~E1000_CTRL_VME; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - } - -#ifndef CONFIG_IGB_VMDQ_NETDEV - for (i = 0; i < adapter->vmdq_pools; i++) { - igb_set_vf_vlan_strip(adapter, - adapter->vfs_allocated_count + i, - enable); - } - -#else - igb_set_vf_vlan_strip(adapter, - adapter->vfs_allocated_count, - enable); - - for (i = 1; i < adapter->vmdq_pools; i++) { -#ifdef HAVE_VLAN_RX_REGISTER - struct igb_vmdq_adapter *vadapter; - vadapter = netdev_priv(adapter->vmdq_netdev[i-1]); - enable = !!vadapter->vlgrp; -#else - struct net_device *vnetdev; - vnetdev = adapter->vmdq_netdev[i-1]; -#ifdef NETIF_F_HW_VLAN_CTAG_RX - enable = !!(vnetdev->features & NETIF_F_HW_VLAN_CTAG_RX); -#else - enable = !!(vnetdev->features & NETIF_F_HW_VLAN_RX); -#endif -#endif - igb_set_vf_vlan_strip(adapter, - adapter->vfs_allocated_count + i, - enable); - } - -#endif - igb_rlpml_set(adapter); -} - -#ifdef HAVE_VLAN_PROTOCOL -static int igb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) -#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef NETIF_F_HW_VLAN_CTAG_RX -static int igb_vlan_rx_add_vid(struct net_device *netdev, - __always_unused __be16 proto, u16 vid) -#else -static int igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -#endif -#else -static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -#endif -{ - struct igb_adapter *adapter = netdev_priv(netdev); - int pf_id = adapter->vfs_allocated_count; - - /* attempt to add filter to vlvf array */ - igb_vlvf_set(adapter, vid, TRUE, pf_id); - - /* add the filter since PF can receive vlans w/o entry in vlvf */ - igb_vfta_set(adapter, vid, TRUE); -#ifndef HAVE_NETDEV_VLAN_FEATURES - - /* Copy feature flags from netdev to the vlan netdev for this vid. - * This allows things like TSO to bubble down to our vlan device. - * There is no need to update netdev for vlan 0 (DCB), since it - * wouldn't has v_netdev. - */ - if (adapter->vlgrp) { - struct vlan_group *vlgrp = adapter->vlgrp; - struct net_device *v_netdev = vlan_group_get_device(vlgrp, vid); - if (v_netdev) { - v_netdev->features |= netdev->features; - vlan_group_set_device(vlgrp, vid, v_netdev); - } - } -#endif -#ifndef HAVE_VLAN_RX_REGISTER - - set_bit(vid, adapter->active_vlans); -#endif -#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID - return 0; -#endif -} - -#ifdef HAVE_VLAN_PROTOCOL -static int igb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) -#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef NETIF_F_HW_VLAN_CTAG_RX -static int igb_vlan_rx_kill_vid(struct net_device *netdev, - __always_unused __be16 proto, u16 vid) -#else -static int igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -#endif -#else -static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -#endif -{ - struct igb_adapter *adapter = netdev_priv(netdev); - int pf_id = adapter->vfs_allocated_count; - s32 err; - -#ifdef HAVE_VLAN_RX_REGISTER - igb_irq_disable(adapter); - - vlan_group_set_device(adapter->vlgrp, vid, NULL); - - if (!test_bit(__IGB_DOWN, &adapter->state)) - igb_irq_enable(adapter); - -#endif /* HAVE_VLAN_RX_REGISTER */ - /* remove vlan from VLVF table array */ - err = igb_vlvf_set(adapter, vid, FALSE, pf_id); - - /* if vid was not present in VLVF just remove it from table */ - if (err) - igb_vfta_set(adapter, vid, FALSE); -#ifndef HAVE_VLAN_RX_REGISTER - - clear_bit(vid, adapter->active_vlans); -#endif -#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID - return 0; -#endif -} - -static void igb_restore_vlan(struct igb_adapter *adapter) -{ -#ifdef HAVE_VLAN_RX_REGISTER - igb_vlan_mode(adapter->netdev, adapter->vlgrp); - - if (adapter->vlgrp) { - u16 vid; - for (vid = 0; vid < VLAN_N_VID; vid++) { - if (!vlan_group_get_device(adapter->vlgrp, vid)) - continue; -#ifdef NETIF_F_HW_VLAN_CTAG_RX - igb_vlan_rx_add_vid(adapter->netdev, - htons(ETH_P_8021Q), vid); -#else - igb_vlan_rx_add_vid(adapter->netdev, vid); -#endif - } - } -#else - u16 vid; - - igb_vlan_mode(adapter->netdev, adapter->netdev->features); - - for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) -#ifdef NETIF_F_HW_VLAN_CTAG_RX - igb_vlan_rx_add_vid(adapter->netdev, - htons(ETH_P_8021Q), vid); -#else - igb_vlan_rx_add_vid(adapter->netdev, vid); -#endif -#endif -} - -int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_mac_info *mac = &adapter->hw.mac; - - mac->autoneg = 0; - - /* SerDes device's does not support 10Mbps Full/duplex - * and 100Mbps Half duplex - */ - if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { - switch (spddplx) { - case SPEED_10 + DUPLEX_HALF: - case SPEED_10 + DUPLEX_FULL: - case SPEED_100 + DUPLEX_HALF: - dev_err(pci_dev_to_dev(pdev), - "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - default: - break; - } - } - - switch (spddplx) { - case SPEED_10 + DUPLEX_HALF: - mac->forced_speed_duplex = ADVERTISE_10_HALF; - break; - case SPEED_10 + DUPLEX_FULL: - mac->forced_speed_duplex = ADVERTISE_10_FULL; - break; - case SPEED_100 + DUPLEX_HALF: - mac->forced_speed_duplex = ADVERTISE_100_HALF; - break; - case SPEED_100 + DUPLEX_FULL: - mac->forced_speed_duplex = ADVERTISE_100_FULL; - break; - case SPEED_1000 + DUPLEX_FULL: - mac->autoneg = 1; - adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; - break; - case SPEED_1000 + DUPLEX_HALF: /* not supported */ - default: - dev_err(pci_dev_to_dev(pdev), "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - } - - /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */ - adapter->hw.phy.mdix = AUTO_ALL_MODES; - - return 0; -} - -static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, - bool runtime) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, rctl, status; - u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; -#ifdef CONFIG_PM - int retval = 0; -#endif - - netif_device_detach(netdev); - - status = E1000_READ_REG(hw, E1000_STATUS); - if (status & E1000_STATUS_LU) - wufc &= ~E1000_WUFC_LNKC; - - if (netif_running(netdev)) - __igb_close(netdev, true); - - igb_clear_interrupt_scheme(adapter); - -#ifdef CONFIG_PM - retval = pci_save_state(pdev); - if (retval) - return retval; -#endif - - if (wufc) { - igb_setup_rctl(adapter); - igb_set_rx_mode(netdev); - - /* turn on all-multi mode if wake on multicast is enabled */ - if (wufc & E1000_WUFC_MC) { - rctl = E1000_READ_REG(hw, E1000_RCTL); - rctl |= E1000_RCTL_MPE; - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - } - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - /* phy power management enable */ - #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 - ctrl |= E1000_CTRL_ADVD3WUC; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Allow time for pending master requests to run */ - e1000_disable_pcie_master(hw); - - E1000_WRITE_REG(hw, E1000_WUC, E1000_WUC_PME_EN); - E1000_WRITE_REG(hw, E1000_WUFC, wufc); - } else { - E1000_WRITE_REG(hw, E1000_WUC, 0); - E1000_WRITE_REG(hw, E1000_WUFC, 0); - } - - *enable_wake = wufc || adapter->en_mng_pt; - if (!*enable_wake) - igb_power_down_link(adapter); - else - igb_power_up_link(adapter); - - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - igb_release_hw_control(adapter); - - pci_disable_device(pdev); - - return 0; -} - -#ifdef CONFIG_PM -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_suspend(struct device *dev) -#else -static int igb_suspend(struct pci_dev *pdev, pm_message_t state) -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -{ -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS - struct pci_dev *pdev = to_pci_dev(dev); -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ - int retval; - bool wake; - - retval = __igb_shutdown(pdev, &wake, 0); - if (retval) - return retval; - - if (wake) { - pci_prepare_to_sleep(pdev); - } else { - pci_wake_from_d3(pdev, false); - pci_set_power_state(pdev, PCI_D3hot); - } - - return 0; -} - -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_resume(struct device *dev) -#else -static int igb_resume(struct pci_dev *pdev) -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -{ -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS - struct pci_dev *pdev = to_pci_dev(dev); -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 err; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_save_state(pdev); - - err = pci_enable_device_mem(pdev); - if (err) { - dev_err(pci_dev_to_dev(pdev), - "igb: Cannot enable PCI device from suspend\n"); - return err; - } - pci_set_master(pdev); - - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - if (igb_init_interrupt_scheme(adapter, true)) { - dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); - return -ENOMEM; - } - - igb_reset(adapter); - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); - - E1000_WRITE_REG(hw, E1000_WUS, ~0); - - if (netdev->flags & IFF_UP) { - rtnl_lock(); - err = __igb_open(netdev, true); - rtnl_unlock(); - if (err) - return err; - } - - netif_device_attach(netdev); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_runtime_idle(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - - if (!igb_has_link(adapter)) - pm_schedule_suspend(dev, MSEC_PER_SEC * 5); - - return -EBUSY; -} - -static int igb_runtime_suspend(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - - retval = __igb_shutdown(pdev, &wake, 1); - if (retval) - return retval; - - if (wake) { - pci_prepare_to_sleep(pdev); - } else { - pci_wake_from_d3(pdev, false); - pci_set_power_state(pdev, PCI_D3hot); - } - - return 0; -} - -static int igb_runtime_resume(struct device *dev) -{ - return igb_resume(dev); -} -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -#endif /* CONFIG_PM_RUNTIME */ -#endif /* CONFIG_PM */ - -#ifdef USE_REBOOT_NOTIFIER -/* only want to do this for 2.4 kernels? */ -static int igb_notify_reboot(struct notifier_block *nb, unsigned long event, - void *p) -{ - struct pci_dev *pdev = NULL; - bool wake; - - switch (event) { - case SYS_DOWN: - case SYS_HALT: - case SYS_POWER_OFF: - while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) { - if (pci_dev_driver(pdev) == &igb_driver) { - __igb_shutdown(pdev, &wake, 0); - if (event == SYS_POWER_OFF) { - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); - } - } - } - } - return NOTIFY_DONE; -} -#else -static void igb_shutdown(struct pci_dev *pdev) -{ - bool wake = false; - - __igb_shutdown(pdev, &wake, 0); - - if (system_state == SYSTEM_POWER_OFF) { - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); - } -} -#endif /* USE_REBOOT_NOTIFIER */ - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void igb_netpoll(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct igb_q_vector *q_vector; - int i; - - for (i = 0; i < adapter->num_q_vectors; i++) { - q_vector = adapter->q_vector[i]; - if (adapter->msix_entries) - E1000_WRITE_REG(hw, E1000_EIMC, q_vector->eims_value); - else - igb_irq_disable(adapter); - napi_schedule(&q_vector->napi); - } -} -#endif /* CONFIG_NET_POLL_CONTROLLER */ - -#ifdef HAVE_PCI_ERS -#define E1000_DEV_ID_82576_VF 0x10CA -/** - * igb_io_error_detected - called when PCI error is detected - * @pdev: Pointer to PCI device - * @state: The current pci connection state - * - * This function is called after a PCI bus error affecting - * this device has been detected. - */ -static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - -#ifdef CONFIG_PCI_IOV__UNUSED - struct pci_dev *bdev, *vfdev; - u32 dw0, dw1, dw2, dw3; - int vf, pos; - u16 req_id, pf_func; - - if (!(adapter->flags & IGB_FLAG_DETECT_BAD_DMA)) - goto skip_bad_vf_detection; - - bdev = pdev->bus->self; - while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT)) - bdev = bdev->bus->self; - - if (!bdev) - goto skip_bad_vf_detection; - - pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); - if (!pos) - goto skip_bad_vf_detection; - - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0); - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1); - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2); - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3); - - req_id = dw1 >> 16; - /* On the 82576 if bit 7 of the requestor ID is set then it's a VF */ - if (!(req_id & 0x0080)) - goto skip_bad_vf_detection; - - pf_func = req_id & 0x01; - if ((pf_func & 1) == (pdev->devfn & 1)) { - - vf = (req_id & 0x7F) >> 1; - dev_err(pci_dev_to_dev(pdev), - "VF %d has caused a PCIe error\n", vf); - dev_err(pci_dev_to_dev(pdev), - "TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " - "%8.8x\tdw3: %8.8x\n", - dw0, dw1, dw2, dw3); - - /* Find the pci device of the offending VF */ - vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, - E1000_DEV_ID_82576_VF, NULL); - while (vfdev) { - if (vfdev->devfn == (req_id & 0xFF)) - break; - vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, - E1000_DEV_ID_82576_VF, vfdev); - } - /* - * There's a slim chance the VF could have been hot plugged, - * so if it is no longer present we don't need to issue the - * VFLR. Just clean up the AER in that case. - */ - if (vfdev) { - dev_err(pci_dev_to_dev(pdev), - "Issuing VFLR to VF %d\n", vf); - pci_write_config_dword(vfdev, 0xA8, 0x00008000); - } - - pci_cleanup_aer_uncorrect_error_status(pdev); - } - - /* - * Even though the error may have occurred on the other port - * we still need to increment the vf error reference count for - * both ports because the I/O resume function will be called - * for both of them. - */ - adapter->vferr_refcount++; - - return PCI_ERS_RESULT_RECOVERED; - -skip_bad_vf_detection: -#endif /* CONFIG_PCI_IOV */ - - netif_device_detach(netdev); - - if (state == pci_channel_io_perm_failure) - return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(netdev)) - igb_down(adapter); - pci_disable_device(pdev); - - /* Request a slot slot reset. */ - return PCI_ERS_RESULT_NEED_RESET; -} - -/** - * igb_io_slot_reset - called after the pci bus has been reset. - * @pdev: Pointer to PCI device - * - * Restart the card from scratch, as if from a cold-boot. Implementation - * resembles the first-half of the igb_resume routine. - */ -static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - pci_ers_result_t result; - - if (pci_enable_device_mem(pdev)) { - dev_err(pci_dev_to_dev(pdev), - "Cannot re-enable PCI device after reset.\n"); - result = PCI_ERS_RESULT_DISCONNECT; - } else { - pci_set_master(pdev); - pci_restore_state(pdev); - pci_save_state(pdev); - - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - schedule_work(&adapter->reset_task); - E1000_WRITE_REG(hw, E1000_WUS, ~0); - result = PCI_ERS_RESULT_RECOVERED; - } - - pci_cleanup_aer_uncorrect_error_status(pdev); - - return result; -} - -/** - * igb_io_resume - called when traffic can start flowing again. - * @pdev: Pointer to PCI device - * - * This callback is called when the error recovery driver tells us that - * its OK to resume normal operation. Implementation resembles the - * second-half of the igb_resume routine. - */ -static void igb_io_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - - if (adapter->vferr_refcount) { - dev_info(pci_dev_to_dev(pdev), "Resuming after VF err\n"); - adapter->vferr_refcount--; - return; - } - - if (netif_running(netdev)) { - if (igb_up(adapter)) { - dev_err(pci_dev_to_dev(pdev), "igb_up failed after reset\n"); - return; - } - } - - netif_device_attach(netdev); - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); -} - -#endif /* HAVE_PCI_ERS */ - -int igb_add_mac_filter(struct igb_adapter *adapter, u8 *addr, u16 queue) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - if (is_zero_ether_addr(addr)) - return 0; - - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (adapter->mac_table[i].state & IGB_MAC_STATE_IN_USE) - continue; - adapter->mac_table[i].state = (IGB_MAC_STATE_MODIFIED | - IGB_MAC_STATE_IN_USE); - memcpy(adapter->mac_table[i].addr, addr, ETH_ALEN); - adapter->mac_table[i].queue = queue; - igb_sync_mac_table(adapter); - return 0; - } - return -ENOMEM; -} -int igb_del_mac_filter(struct igb_adapter *adapter, u8* addr, u16 queue) -{ - /* search table for addr, if found, set to 0 and sync */ - int i; - struct e1000_hw *hw = &adapter->hw; - - if (is_zero_ether_addr(addr)) - return 0; - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (ether_addr_equal(addr, adapter->mac_table[i].addr) && - adapter->mac_table[i].queue == queue) { - adapter->mac_table[i].state = IGB_MAC_STATE_MODIFIED; - memset(adapter->mac_table[i].addr, 0, ETH_ALEN); - adapter->mac_table[i].queue = 0; - igb_sync_mac_table(adapter); - return 0; - } - } - return -ENOMEM; -} -static int igb_set_vf_mac(struct igb_adapter *adapter, - int vf, unsigned char *mac_addr) -{ - igb_del_mac_filter(adapter, adapter->vf_data[vf].vf_mac_addresses, vf); - memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN); - - igb_add_mac_filter(adapter, mac_addr, vf); - - return 0; -} - -#ifdef IFLA_VF_MAX -static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count)) - return -EINVAL; - adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC; - dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf); - dev_info(&adapter->pdev->dev, "Reload the VF driver to make this" - " change effective.\n"); - if (test_bit(__IGB_DOWN, &adapter->state)) { - dev_warn(&adapter->pdev->dev, "The VF MAC address has been set," - " but the PF device is not up.\n"); - dev_warn(&adapter->pdev->dev, "Bring the PF device up before" - " attempting to use the VF device.\n"); - } - return igb_set_vf_mac(adapter, vf, mac); -} - -static int igb_link_mbps(int internal_link_speed) -{ - switch (internal_link_speed) { - case SPEED_100: - return 100; - case SPEED_1000: - return 1000; - case SPEED_2500: - return 2500; - default: - return 0; - } -} - -static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate, - int link_speed) -{ - int rf_dec, rf_int; - u32 bcnrc_val; - - if (tx_rate != 0) { - /* Calculate the rate factor values to set */ - rf_int = link_speed / tx_rate; - rf_dec = (link_speed - (rf_int * tx_rate)); - rf_dec = (rf_dec * (1<vf_rate_link_speed == 0) || - (adapter->hw.mac.type != e1000_82576)) - return; - - actual_link_speed = igb_link_mbps(adapter->link_speed); - if (actual_link_speed != adapter->vf_rate_link_speed) { - reset_rate = true; - adapter->vf_rate_link_speed = 0; - dev_info(&adapter->pdev->dev, - "Link speed has been changed. VF Transmit rate is disabled\n"); - } - - for (i = 0; i < adapter->vfs_allocated_count; i++) { - if (reset_rate) - adapter->vf_data[i].tx_rate = 0; - - igb_set_vf_rate_limit(&adapter->hw, i, - adapter->vf_data[i].tx_rate, actual_link_speed); - } -} - -#ifdef HAVE_VF_MIN_MAX_TXRATE -static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate, - int tx_rate) -#else /* HAVE_VF_MIN_MAX_TXRATE */ -static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate) -#endif /* HAVE_VF_MIN_MAX_TXRATE */ -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - int actual_link_speed; - - if (hw->mac.type != e1000_82576) - return -EOPNOTSUPP; - -#ifdef HAVE_VF_MIN_MAX_TXRATE - if (min_tx_rate) - return -EINVAL; -#endif /* HAVE_VF_MIN_MAX_TXRATE */ - - actual_link_speed = igb_link_mbps(adapter->link_speed); - if ((vf >= adapter->vfs_allocated_count) || - (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) || - (tx_rate < 0) || (tx_rate > actual_link_speed)) - return -EINVAL; - - adapter->vf_rate_link_speed = actual_link_speed; - adapter->vf_data[vf].tx_rate = (u16)tx_rate; - igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed); - - return 0; -} - -static int igb_ndo_get_vf_config(struct net_device *netdev, - int vf, struct ifla_vf_info *ivi) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - if (vf >= adapter->vfs_allocated_count) - return -EINVAL; - ivi->vf = vf; - memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN); -#ifdef HAVE_VF_MIN_MAX_TXRATE - ivi->max_tx_rate = adapter->vf_data[vf].tx_rate; - ivi->min_tx_rate = 0; -#else /* HAVE_VF_MIN_MAX_TXRATE */ - ivi->tx_rate = adapter->vf_data[vf].tx_rate; -#endif /* HAVE_VF_MIN_MAX_TXRATE */ - ivi->vlan = adapter->vf_data[vf].pf_vlan; - ivi->qos = adapter->vf_data[vf].pf_qos; -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE - ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled; -#endif - return 0; -} -#endif -static void igb_vmm_control(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int count; - u32 reg; - - switch (hw->mac.type) { - case e1000_82575: - default: - /* replication is not supported for 82575 */ - return; - case e1000_82576: - /* notify HW that the MAC is adding vlan tags */ - reg = E1000_READ_REG(hw, E1000_DTXCTL); - reg |= (E1000_DTXCTL_VLAN_ADDED | - E1000_DTXCTL_SPOOF_INT); - E1000_WRITE_REG(hw, E1000_DTXCTL, reg); - case e1000_82580: - /* enable replication vlan tag stripping */ - reg = E1000_READ_REG(hw, E1000_RPLOLR); - reg |= E1000_RPLOLR_STRVLAN; - E1000_WRITE_REG(hw, E1000_RPLOLR, reg); - case e1000_i350: - case e1000_i354: - /* none of the above registers are supported by i350 */ - break; - } - - /* Enable Malicious Driver Detection */ - if ((adapter->vfs_allocated_count) && - (adapter->mdd)) { - if (hw->mac.type == e1000_i350) - igb_enable_mdd(adapter); - } - - /* enable replication and loopback support */ - count = adapter->vfs_allocated_count || adapter->vmdq_pools; - if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE && count) - e1000_vmdq_set_loopback_pf(hw, 1); - e1000_vmdq_set_anti_spoofing_pf(hw, - adapter->vfs_allocated_count || adapter->vmdq_pools, - adapter->vfs_allocated_count); - e1000_vmdq_set_replication_pf(hw, adapter->vfs_allocated_count || - adapter->vmdq_pools); -} - -static void igb_init_fw(struct igb_adapter *adapter) -{ - struct e1000_fw_drv_info fw_cmd; - struct e1000_hw *hw = &adapter->hw; - int i; - u16 mask; - - if (hw->mac.type == e1000_i210) - mask = E1000_SWFW_EEP_SM; - else - mask = E1000_SWFW_PHY0_SM; - /* i211 parts do not support this feature */ - if (hw->mac.type == e1000_i211) - hw->mac.arc_subsystem_valid = false; - - if (!hw->mac.ops.acquire_swfw_sync(hw, mask)) { - for (i = 0; i <= FW_MAX_RETRIES; i++) { - E1000_WRITE_REG(hw, E1000_FWSTS, E1000_FWSTS_FWRI); - fw_cmd.hdr.cmd = FW_CMD_DRV_INFO; - fw_cmd.hdr.buf_len = FW_CMD_DRV_INFO_LEN; - fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CMD_RESERVED; - fw_cmd.port_num = hw->bus.func; - fw_cmd.drv_version = FW_FAMILY_DRV_VER; - fw_cmd.hdr.checksum = 0; - fw_cmd.hdr.checksum = e1000_calculate_checksum((u8 *)&fw_cmd, - (FW_HDR_LEN + - fw_cmd.hdr.buf_len)); - e1000_host_interface_command(hw, (u8*)&fw_cmd, - sizeof(fw_cmd)); - if (fw_cmd.hdr.cmd_or_resp.ret_status == FW_STATUS_SUCCESS) - break; - } - } else - dev_warn(pci_dev_to_dev(adapter->pdev), - "Unable to get semaphore, firmware init failed.\n"); - hw->mac.ops.release_swfw_sync(hw, mask); -} - -static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) -{ - struct e1000_hw *hw = &adapter->hw; - u32 dmac_thr; - u16 hwm; - u32 status; - - if (hw->mac.type == e1000_i211) - return; - - if (hw->mac.type > e1000_82580) { - if (adapter->dmac != IGB_DMAC_DISABLE) { - u32 reg; - - /* force threshold to 0. */ - E1000_WRITE_REG(hw, E1000_DMCTXTH, 0); - - /* - * DMA Coalescing high water mark needs to be greater - * than the Rx threshold. Set hwm to PBA - max frame - * size in 16B units, capping it at PBA - 6KB. - */ - hwm = 64 * pba - adapter->max_frame_size / 16; - if (hwm < 64 * (pba - 6)) - hwm = 64 * (pba - 6); - reg = E1000_READ_REG(hw, E1000_FCRTC); - reg &= ~E1000_FCRTC_RTH_COAL_MASK; - reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT) - & E1000_FCRTC_RTH_COAL_MASK); - E1000_WRITE_REG(hw, E1000_FCRTC, reg); - - /* - * Set the DMA Coalescing Rx threshold to PBA - 2 * max - * frame size, capping it at PBA - 10KB. - */ - dmac_thr = pba - adapter->max_frame_size / 512; - if (dmac_thr < pba - 10) - dmac_thr = pba - 10; - reg = E1000_READ_REG(hw, E1000_DMACR); - reg &= ~E1000_DMACR_DMACTHR_MASK; - reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT) - & E1000_DMACR_DMACTHR_MASK); - - /* transition to L0x or L1 if available..*/ - reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK); - - /* Check if status is 2.5Gb backplane connection - * before configuration of watchdog timer, which is - * in msec values in 12.8usec intervals - * watchdog timer= msec values in 32usec intervals - * for non 2.5Gb connection - */ - if (hw->mac.type == e1000_i354) { - status = E1000_READ_REG(hw, E1000_STATUS); - if ((status & E1000_STATUS_2P5_SKU) && - (!(status & E1000_STATUS_2P5_SKU_OVER))) - reg |= ((adapter->dmac * 5) >> 6); - else - reg |= ((adapter->dmac) >> 5); - } else { - reg |= ((adapter->dmac) >> 5); - } - - /* - * Disable BMC-to-OS Watchdog enable - * on devices that support OS-to-BMC - */ - if (hw->mac.type != e1000_i354) - reg &= ~E1000_DMACR_DC_BMC2OSW_EN; - E1000_WRITE_REG(hw, E1000_DMACR, reg); - - /* no lower threshold to disable coalescing(smart fifb)-UTRESH=0*/ - E1000_WRITE_REG(hw, E1000_DMCRTRH, 0); - - /* This sets the time to wait before requesting - * transition to low power state to number of usecs - * needed to receive 1 512 byte frame at gigabit - * line rate. On i350 device, time to make transition - * to Lx state is delayed by 4 usec with flush disable - * bit set to avoid losing mailbox interrupts - */ - reg = E1000_READ_REG(hw, E1000_DMCTLX); - if (hw->mac.type == e1000_i350) - reg |= IGB_DMCTLX_DCFLUSH_DIS; - - /* in 2.5Gb connection, TTLX unit is 0.4 usec - * which is 0x4*2 = 0xA. But delay is still 4 usec - */ - if (hw->mac.type == e1000_i354) { - status = E1000_READ_REG(hw, E1000_STATUS); - if ((status & E1000_STATUS_2P5_SKU) && - (!(status & E1000_STATUS_2P5_SKU_OVER))) - reg |= 0xA; - else - reg |= 0x4; - } else { - reg |= 0x4; - } - E1000_WRITE_REG(hw, E1000_DMCTLX, reg); - - /* free space in tx packet buffer to wake from DMA coal */ - E1000_WRITE_REG(hw, E1000_DMCTXTH, (IGB_MIN_TXPBSIZE - - (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6); - - /* make low power state decision controlled by DMA coal */ - reg = E1000_READ_REG(hw, E1000_PCIEMISC); - reg &= ~E1000_PCIEMISC_LX_DECISION; - E1000_WRITE_REG(hw, E1000_PCIEMISC, reg); - } /* endif adapter->dmac is not disabled */ - } else if (hw->mac.type == e1000_82580) { - u32 reg = E1000_READ_REG(hw, E1000_PCIEMISC); - E1000_WRITE_REG(hw, E1000_PCIEMISC, - reg & ~E1000_PCIEMISC_LX_DECISION); - E1000_WRITE_REG(hw, E1000_DMACR, 0); - } -} - -#ifdef HAVE_I2C_SUPPORT -/* igb_read_i2c_byte - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: device address - * @data: value read - * - * Performs byte read operation over I2C interface at - * a specified device address. - */ -s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) -{ - struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = adapter->i2c_client; - s32 status; - u16 swfw_mask = 0; - - if (!this_client) - return E1000_ERR_I2C; - - swfw_mask = E1000_SWFW_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) - != E1000_SUCCESS) - return E1000_ERR_SWFW_SYNC; - - status = i2c_smbus_read_byte_data(this_client, byte_offset); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - - if (status < 0) - return E1000_ERR_I2C; - else { - *data = status; - return E1000_SUCCESS; - } -} - -/* igb_write_i2c_byte - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: device address - * @data: value to write - * - * Performs byte write operation over I2C interface at - * a specified device address. - */ -s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) -{ - struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = adapter->i2c_client; - s32 status; - u16 swfw_mask = E1000_SWFW_PHY0_SM; - - if (!this_client) - return E1000_ERR_I2C; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) - return E1000_ERR_SWFW_SYNC; - status = i2c_smbus_write_byte_data(this_client, byte_offset, data); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - - if (status) - return E1000_ERR_I2C; - else - return E1000_SUCCESS; -} -#endif /* HAVE_I2C_SUPPORT */ -/* igb_main.c */ - - -/** - * igb_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in igb_pci_tbl - * - * Returns 0 on success, negative on failure - * - * igb_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - **/ -int igb_kni_probe(struct pci_dev *pdev, - struct net_device **lad_dev) -{ - struct net_device *netdev; - struct igb_adapter *adapter; - struct e1000_hw *hw; - u16 eeprom_data = 0; - u8 pba_str[E1000_PBANUM_LENGTH]; - s32 ret_val; - static int global_quad_port_a; /* global quad port a indication */ - int i, err, pci_using_dac = 0; - static int cards_found; - - err = pci_enable_device_mem(pdev); - if (err) - return err; - -#ifdef NO_KNI - pci_using_dac = 0; - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; - } else { - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - IGB_ERR("No usable DMA configuration, " - "aborting\n"); - goto err_dma; - } - } - } - -#ifndef HAVE_ASPM_QUIRKS - /* 82575 requires that the pci-e link partner disable the L0s state */ - switch (pdev->device) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); - default: - break; - } - -#endif /* HAVE_ASPM_QUIRKS */ - err = pci_request_selected_regions(pdev, - pci_select_bars(pdev, - IORESOURCE_MEM), - igb_driver_name); - if (err) - goto err_pci_reg; - - pci_enable_pcie_error_reporting(pdev); - - pci_set_master(pdev); - - err = -ENOMEM; -#endif /* NO_KNI */ -#ifdef HAVE_TX_MQ - netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), - IGB_MAX_TX_QUEUES); -#else - netdev = alloc_etherdev(sizeof(struct igb_adapter)); -#endif /* HAVE_TX_MQ */ - if (!netdev) - goto err_alloc_etherdev; - - SET_MODULE_OWNER(netdev); - SET_NETDEV_DEV(netdev, &pdev->dev); - - //pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - hw = &adapter->hw; - hw->back = adapter; - adapter->port_num = hw->bus.func; - adapter->msg_enable = (1 << debug) - 1; - -#ifdef HAVE_PCI_ERS - err = pci_save_state(pdev); - if (err) - goto err_ioremap; -#endif - err = -EIO; - hw->hw_addr = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (!hw->hw_addr) - goto err_ioremap; - -#ifdef HAVE_NET_DEVICE_OPS - netdev->netdev_ops = &igb_netdev_ops; -#else /* HAVE_NET_DEVICE_OPS */ - netdev->open = &igb_open; - netdev->stop = &igb_close; - netdev->get_stats = &igb_get_stats; -#ifdef HAVE_SET_RX_MODE - netdev->set_rx_mode = &igb_set_rx_mode; -#endif - netdev->set_multicast_list = &igb_set_rx_mode; - netdev->set_mac_address = &igb_set_mac; - netdev->change_mtu = &igb_change_mtu; - netdev->do_ioctl = &igb_ioctl; -#ifdef HAVE_TX_TIMEOUT - netdev->tx_timeout = &igb_tx_timeout; -#endif - netdev->vlan_rx_register = igb_vlan_mode; - netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; - netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = igb_netpoll; -#endif - netdev->hard_start_xmit = &igb_xmit_frame; -#endif /* HAVE_NET_DEVICE_OPS */ - igb_set_ethtool_ops(netdev); -#ifdef HAVE_TX_TIMEOUT - netdev->watchdog_timeo = 5 * HZ; -#endif - - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); - - adapter->bd_number = cards_found; - - /* setup the private structure */ - err = igb_sw_init(adapter); - if (err) - goto err_sw_init; - - e1000_get_bus_info(hw); - - hw->phy.autoneg_wait_to_complete = FALSE; - hw->mac.adaptive_ifs = FALSE; - - /* Copper options */ - if (hw->phy.media_type == e1000_media_type_copper) { - hw->phy.mdix = AUTO_ALL_MODES; - hw->phy.disable_polarity_correction = FALSE; - hw->phy.ms_type = e1000_ms_hw_default; - } - - if (e1000_check_reset_block(hw)) - dev_info(pci_dev_to_dev(pdev), - "PHY reset is blocked due to SOL/IDER session.\n"); - - /* - * features is initialized to 0 in allocation, it might have bits - * set by igb_sw_init so we should use an or instead of an - * assignment. - */ - netdev->features |= NETIF_F_SG | - NETIF_F_IP_CSUM | -#ifdef NETIF_F_IPV6_CSUM - NETIF_F_IPV6_CSUM | -#endif -#ifdef NETIF_F_TSO - NETIF_F_TSO | -#ifdef NETIF_F_TSO6 - NETIF_F_TSO6 | -#endif -#endif /* NETIF_F_TSO */ -#ifdef NETIF_F_RXHASH - NETIF_F_RXHASH | -#endif - NETIF_F_RXCSUM | -#ifdef NETIF_F_HW_VLAN_CTAG_RX - NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_CTAG_TX; -#else - NETIF_F_HW_VLAN_RX | - NETIF_F_HW_VLAN_TX; -#endif - - if (hw->mac.type >= e1000_82576) - netdev->features |= NETIF_F_SCTP_CSUM; - -#ifdef HAVE_NDO_SET_FEATURES - /* copy netdev features into list of user selectable features */ - netdev->hw_features |= netdev->features; -#ifndef IGB_NO_LRO - - /* give us the option of enabling LRO later */ - netdev->hw_features |= NETIF_F_LRO; -#endif -#else -#ifdef NETIF_F_GRO - - /* this is only needed on kernels prior to 2.6.39 */ - netdev->features |= NETIF_F_GRO; -#endif -#endif - - /* set this bit last since it cannot be part of hw_features */ -#ifdef NETIF_F_HW_VLAN_CTAG_FILTER - netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; -#else - netdev->features |= NETIF_F_HW_VLAN_FILTER; -#endif - -#ifdef HAVE_NETDEV_VLAN_FEATURES - netdev->vlan_features |= NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | - NETIF_F_SG; - -#endif - if (pci_using_dac) - netdev->features |= NETIF_F_HIGHDMA; - -#ifdef NO_KNI - adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); -#ifdef DEBUG - if (adapter->dmac != IGB_DMAC_DISABLE) - printk("%s: DMA Coalescing is enabled..\n", netdev->name); -#endif - - /* before reading the NVM, reset the controller to put the device in a - * known good starting state */ - e1000_reset_hw(hw); -#endif /* NO_KNI */ - - /* make sure the NVM is good */ - if (e1000_validate_nvm_checksum(hw) < 0) { - dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" - " Valid\n"); - err = -EIO; - goto err_eeprom; - } - - /* copy the MAC address out of the NVM */ - if (e1000_read_mac_addr(hw)) - dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); - memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); -#ifdef ETHTOOL_GPERMADDR - memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->perm_addr)) { -#else - if (!is_valid_ether_addr(netdev->dev_addr)) { -#endif - dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); - err = -EIO; - goto err_eeprom; - } - - memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); - adapter->mac_table[0].queue = adapter->vfs_allocated_count; - adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); - igb_rar_set(adapter, 0); - - /* get firmware version for ethtool -i */ - igb_set_fw_version(adapter); - - /* Check if Media Autosense is enabled */ - if (hw->mac.type == e1000_82580) - igb_init_mas(adapter); - -#ifdef NO_KNI -#ifdef HAVE_TIMER_SETUP - timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); - timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); -#else - setup_timer(&adapter->watchdog_timer, &igb_watchdog, - (unsigned long) adapter); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, - (unsigned long) adapter); - setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, - (unsigned long) adapter); -#endif - - INIT_WORK(&adapter->reset_task, igb_reset_task); - INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); -#endif - - /* Initialize link properties that are user-changeable */ - adapter->fc_autoneg = true; - hw->mac.autoneg = true; - hw->phy.autoneg_advertised = 0x2f; - - hw->fc.requested_mode = e1000_fc_default; - hw->fc.current_mode = e1000_fc_default; - - e1000_validate_mdi_setting(hw); - - /* By default, support wake on port A */ - if (hw->bus.func == 0) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* Check the NVM for wake support for non-port A ports */ - if (hw->mac.type >= e1000_82580) - hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &eeprom_data); - else if (hw->bus.func == 1) - e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); - - if (eeprom_data & IGB_EEPROM_APME) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* now that we have the eeprom settings, apply the special cases where - * the eeprom may be wrong or the board simply won't support wake on - * lan on a particular port */ - switch (pdev->device) { - case E1000_DEV_ID_82575GB_QUAD_COPPER: - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - /* Wake events only supported on port A for dual fiber - * regardless of eeprom setting */ - if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - /* if quad port adapter, disable WoL on all but port A */ - if (global_quad_port_a != 0) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - else - adapter->flags |= IGB_FLAG_QUAD_PORT_A; - /* Reset for multiple quad port adapters */ - if (++global_quad_port_a == 4) - global_quad_port_a = 0; - break; - default: - /* If the device can't wake, don't set software support */ - if (!device_can_wakeup(&adapter->pdev->dev)) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - } - - /* initialize the wol settings based on the eeprom settings */ - if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) - adapter->wol |= E1000_WUFC_MAG; - - /* Some vendors want WoL disabled by default, but still supported */ - if ((hw->mac.type == e1000_i350) && - (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - adapter->wol = 0; - } - -#ifdef NO_KNI - device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), - adapter->flags & IGB_FLAG_WOL_SUPPORTED); - - /* reset the hardware with the new settings */ - igb_reset(adapter); - adapter->devrc = 0; - -#ifdef HAVE_I2C_SUPPORT - /* Init the I2C interface */ - err = igb_init_i2c(adapter); - if (err) { - dev_err(&pdev->dev, "failed to init i2c interface\n"); - goto err_eeprom; - } -#endif /* HAVE_I2C_SUPPORT */ - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); - - strncpy(netdev->name, "eth%d", IFNAMSIZ); - err = register_netdev(netdev); - if (err) - goto err_register; - -#ifdef CONFIG_IGB_VMDQ_NETDEV - err = igb_init_vmdq_netdevs(adapter); - if (err) - goto err_register; -#endif - /* carrier off reporting is important to ethtool even BEFORE open */ - netif_carrier_off(netdev); - -#ifdef IGB_DCA - if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { - adapter->flags |= IGB_FLAG_DCA_ENABLED; - dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); - igb_setup_dca(adapter); - } - -#endif -#ifdef HAVE_PTP_1588_CLOCK - /* do hw tstamp init after resetting */ - igb_ptp_init(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - -#endif /* NO_KNI */ - dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); - /* print bus type/speed/width info */ - dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", - netdev->name, - ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : - (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown"), - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : - (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown")); - dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); - for (i = 0; i < 6; i++) - printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); - - ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); - if (ret_val) - strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); - dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, - pba_str); - - - /* Initialize the thermal sensor on i350 devices. */ - if (hw->mac.type == e1000_i350) { - if (hw->bus.func == 0) { - u16 ets_word; - - /* - * Read the NVM to determine if this i350 device - * supports an external thermal sensor. - */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); - if (ets_word != 0x0000 && ets_word != 0xFFFF) - adapter->ets = true; - else - adapter->ets = false; - } -#ifdef NO_KNI -#ifdef IGB_HWMON - - igb_sysfs_init(adapter); -#else -#ifdef IGB_PROCFS - - igb_procfs_init(adapter); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ -#endif /* NO_KNI */ - } else { - adapter->ets = false; - } - - if (hw->phy.media_type == e1000_media_type_copper) { - switch (hw->mac.type) { - case e1000_i350: - case e1000_i210: - case e1000_i211: - /* Enable EEE for internal copper PHY devices */ - err = e1000_set_eee_i350(hw); - if ((!err) && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - break; - case e1000_i354: - if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & - (E1000_CTRL_EXT_LINK_MODE_SGMII)) { - err = e1000_set_eee_i354(hw); - if ((!err) && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - } - break; - default: - break; - } - } - - /* send driver version info to firmware */ - if (hw->mac.type >= e1000_i350) - igb_init_fw(adapter); - -#ifndef IGB_NO_LRO - if (netdev->features & NETIF_F_LRO) - dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); - else - dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); -#endif - dev_info(pci_dev_to_dev(pdev), - "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", - adapter->msix_entries ? "MSI-X" : - (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", - adapter->num_rx_queues, adapter->num_tx_queues); - - cards_found++; - *lad_dev = netdev; - - pm_runtime_put_noidle(&pdev->dev); - return 0; - -//err_register: -// igb_release_hw_control(adapter); -#ifdef HAVE_I2C_SUPPORT - memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); -#endif /* HAVE_I2C_SUPPORT */ -err_eeprom: -// if (!e1000_check_reset_block(hw)) -// e1000_phy_hw_reset(hw); - - if (hw->flash_address) - iounmap(hw->flash_address); -err_sw_init: -// igb_clear_interrupt_scheme(adapter); -// igb_reset_sriov_capability(adapter); - iounmap(hw->hw_addr); -err_ioremap: - free_netdev(netdev); -err_alloc_etherdev: -// pci_release_selected_regions(pdev, -// pci_select_bars(pdev, IORESOURCE_MEM)); -//err_pci_reg: -//err_dma: - pci_disable_device(pdev); - return err; -} - - -void igb_kni_remove(struct pci_dev *pdev) -{ - pci_disable_device(pdev); -} diff --git a/kernel/linux/kni/ethtool/igb/igb_param.c b/kernel/linux/kni/ethtool/igb/igb_param.c deleted file mode 100644 index 98209a1019..0000000000 --- a/kernel/linux/kni/ethtool/igb/igb_param.c +++ /dev/null @@ -1,832 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - - -#include - -#include "igb.h" - -/* This is the only thing that needs to be changed to adjust the - * maximum number of ports that the driver can manage. - */ - -#define IGB_MAX_NIC 32 - -#define OPTION_UNSET -1 -#define OPTION_DISABLED 0 -#define OPTION_ENABLED 1 -#define MAX_NUM_LIST_OPTS 15 - -/* All parameters are treated the same, as an integer array of values. - * This macro just reduces the need to repeat the same declaration code - * over and over (plus this helps to avoid typo bugs). - */ - -#define IGB_PARAM_INIT { [0 ... IGB_MAX_NIC] = OPTION_UNSET } -#ifndef module_param_array -/* Module Parameters are always initialized to -1, so that the driver - * can tell the difference between no user specified value or the - * user asking for the default value. - * The true default values are loaded in when igb_check_options is called. - * - * This is a GCC extension to ANSI C. - * See the item "Labeled Elements in Initializers" in the section - * "Extensions to the C Language Family" of the GCC documentation. - */ - -#define IGB_PARAM(X, desc) \ - static const int X[IGB_MAX_NIC+1] = IGB_PARAM_INIT; \ - MODULE_PARM(X, "1-" __MODULE_STRING(IGB_MAX_NIC) "i"); \ - MODULE_PARM_DESC(X, desc); -#else -#define IGB_PARAM(X, desc) \ - static int X[IGB_MAX_NIC+1] = IGB_PARAM_INIT; \ - static unsigned int num_##X; \ - module_param_array_named(X, X, int, &num_##X, 0); \ - MODULE_PARM_DESC(X, desc); -#endif - -/* Interrupt Throttle Rate (interrupts/sec) - * - * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) - */ -IGB_PARAM(InterruptThrottleRate, - "Maximum interrupts per second, per vector, (max 100000), default 3=adaptive"); -#define DEFAULT_ITR 3 -#define MAX_ITR 100000 -/* #define MIN_ITR 120 */ -#define MIN_ITR 0 -/* IntMode (Interrupt Mode) - * - * Valid Range: 0 - 2 - * - * Default Value: 2 (MSI-X) - */ -IGB_PARAM(IntMode, "Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default 2"); -#define MAX_INTMODE IGB_INT_MODE_MSIX -#define MIN_INTMODE IGB_INT_MODE_LEGACY - -IGB_PARAM(Node, "set the starting node to allocate memory on, default -1"); - -/* LLIPort (Low Latency Interrupt TCP Port) - * - * Valid Range: 0 - 65535 - * - * Default Value: 0 (disabled) - */ -IGB_PARAM(LLIPort, "Low Latency Interrupt TCP Port (0-65535), default 0=off"); - -#define DEFAULT_LLIPORT 0 -#define MAX_LLIPORT 0xFFFF -#define MIN_LLIPORT 0 - -/* LLIPush (Low Latency Interrupt on TCP Push flag) - * - * Valid Range: 0, 1 - * - * Default Value: 0 (disabled) - */ -IGB_PARAM(LLIPush, "Low Latency Interrupt on TCP Push flag (0,1), default 0=off"); - -#define DEFAULT_LLIPUSH 0 -#define MAX_LLIPUSH 1 -#define MIN_LLIPUSH 0 - -/* LLISize (Low Latency Interrupt on Packet Size) - * - * Valid Range: 0 - 1500 - * - * Default Value: 0 (disabled) - */ -IGB_PARAM(LLISize, "Low Latency Interrupt on Packet Size (0-1500), default 0=off"); - -#define DEFAULT_LLISIZE 0 -#define MAX_LLISIZE 1500 -#define MIN_LLISIZE 0 - -/* RSS (Enable RSS multiqueue receive) - * - * Valid Range: 0 - 8 - * - * Default Value: 1 - */ -IGB_PARAM(RSS, "Number of Receive-Side Scaling Descriptor Queues (0-8), default 1, 0=number of cpus"); - -#define DEFAULT_RSS 1 -#define MAX_RSS 8 -#define MIN_RSS 0 - -/* VMDQ (Enable VMDq multiqueue receive) - * - * Valid Range: 0 - 8 - * - * Default Value: 0 - */ -IGB_PARAM(VMDQ, "Number of Virtual Machine Device Queues: 0-1 = disable, 2-8 enable, default 0"); - -#define DEFAULT_VMDQ 0 -#define MAX_VMDQ MAX_RSS -#define MIN_VMDQ 0 - -/* max_vfs (Enable SR-IOV VF devices) - * - * Valid Range: 0 - 7 - * - * Default Value: 0 - */ -IGB_PARAM(max_vfs, "Number of Virtual Functions: 0 = disable, 1-7 enable, default 0"); - -#define DEFAULT_SRIOV 0 -#define MAX_SRIOV 7 -#define MIN_SRIOV 0 - -/* MDD (Enable Malicious Driver Detection) - * - * Only available when SR-IOV is enabled - max_vfs is greater than 0 - * - * Valid Range: 0, 1 - * - * Default Value: 1 - */ -IGB_PARAM(MDD, "Malicious Driver Detection (0/1), default 1 = enabled. " - "Only available when max_vfs is greater than 0"); - -#ifdef DEBUG - -/* Disable Hardware Reset on Tx Hang - * - * Valid Range: 0, 1 - * - * Default Value: 0 (disabled, i.e. h/w will reset) - */ -IGB_PARAM(DisableHwReset, "Disable reset of hardware on Tx hang"); - -/* Dump Transmit and Receive buffers - * - * Valid Range: 0, 1 - * - * Default Value: 0 - */ -IGB_PARAM(DumpBuffers, "Dump Tx/Rx buffers on Tx hang or by request"); - -#endif /* DEBUG */ - -/* QueuePairs (Enable TX/RX queue pairs for interrupt handling) - * - * Valid Range: 0 - 1 - * - * Default Value: 1 - */ -IGB_PARAM(QueuePairs, "Enable Tx/Rx queue pairs for interrupt handling (0,1), default 1=on"); - -#define DEFAULT_QUEUE_PAIRS 1 -#define MAX_QUEUE_PAIRS 1 -#define MIN_QUEUE_PAIRS 0 - -/* Enable/disable EEE (a.k.a. IEEE802.3az) - * - * Valid Range: 0, 1 - * - * Default Value: 1 - */ - IGB_PARAM(EEE, "Enable/disable on parts that support the feature"); - -/* Enable/disable DMA Coalescing - * - * Valid Values: 0(off), 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, - * 9000, 10000(msec), 250(usec), 500(usec) - * - * Default Value: 0 - */ - IGB_PARAM(DMAC, "Disable or set latency for DMA Coalescing ((0=off, 1000-10000(msec), 250, 500 (usec))"); - -#ifndef IGB_NO_LRO -/* Enable/disable Large Receive Offload - * - * Valid Values: 0(off), 1(on) - * - * Default Value: 0 - */ - IGB_PARAM(LRO, "Large Receive Offload (0,1), default 0=off"); - -#endif -struct igb_opt_list { - int i; - char *str; -}; -struct igb_option { - enum { enable_option, range_option, list_option } type; - const char *name; - const char *err; - int def; - union { - struct { /* range_option info */ - int min; - int max; - } r; - struct { /* list_option info */ - int nr; - struct igb_opt_list *p; - } l; - } arg; -}; - -static int igb_validate_option(unsigned int *value, - struct igb_option *opt, - struct igb_adapter *adapter) -{ - if (*value == OPTION_UNSET) { - *value = opt->def; - return 0; - } - - switch (opt->type) { - case enable_option: - switch (*value) { - case OPTION_ENABLED: - DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name); - return 0; - case OPTION_DISABLED: - DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name); - return 0; - } - break; - case range_option: - if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - DPRINTK(PROBE, INFO, - "%s set to %d\n", opt->name, *value); - return 0; - } - break; - case list_option: { - int i; - struct igb_opt_list *ent; - - for (i = 0; i < opt->arg.l.nr; i++) { - ent = &opt->arg.l.p[i]; - if (*value == ent->i) { - if (ent->str[0] != '\0') - DPRINTK(PROBE, INFO, "%s\n", ent->str); - return 0; - } - } - } - break; - default: - BUG(); - } - - DPRINTK(PROBE, INFO, "Invalid %s value specified (%d) %s\n", - opt->name, *value, opt->err); - *value = opt->def; - return -1; -} - -/** - * igb_check_options - Range Checking for Command Line Parameters - * @adapter: board private structure - * - * This routine checks all command line parameters for valid user - * input. If an invalid value is given, or if no user specified - * value exists, a default value is used. The final value is stored - * in a variable in the adapter structure. - **/ - -void igb_check_options(struct igb_adapter *adapter) -{ - int bd = adapter->bd_number; - struct e1000_hw *hw = &adapter->hw; - - if (bd >= IGB_MAX_NIC) { - DPRINTK(PROBE, NOTICE, - "Warning: no configuration for board #%d\n", bd); - DPRINTK(PROBE, NOTICE, "Using defaults for all values\n"); -#ifndef module_param_array - bd = IGB_MAX_NIC; -#endif - } - - { /* Interrupt Throttling Rate */ - struct igb_option opt = { - .type = range_option, - .name = "Interrupt Throttling Rate (ints/sec)", - .err = "using default of " __MODULE_STRING(DEFAULT_ITR), - .def = DEFAULT_ITR, - .arg = { .r = { .min = MIN_ITR, - .max = MAX_ITR } } - }; - -#ifdef module_param_array - if (num_InterruptThrottleRate > bd) { -#endif - unsigned int itr = InterruptThrottleRate[bd]; - - switch (itr) { - case 0: - DPRINTK(PROBE, INFO, "%s turned off\n", - opt.name); - if (hw->mac.type >= e1000_i350) - adapter->dmac = IGB_DMAC_DISABLE; - adapter->rx_itr_setting = itr; - break; - case 1: - DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", - opt.name); - adapter->rx_itr_setting = itr; - break; - case 3: - DPRINTK(PROBE, INFO, - "%s set to dynamic conservative mode\n", - opt.name); - adapter->rx_itr_setting = itr; - break; - default: - igb_validate_option(&itr, &opt, adapter); - /* Save the setting, because the dynamic bits - * change itr. In case of invalid user value, - * default to conservative mode, else need to - * clear the lower two bits because they are - * used as control */ - if (itr == 3) { - adapter->rx_itr_setting = itr; - } else { - adapter->rx_itr_setting = 1000000000 / - (itr * 256); - adapter->rx_itr_setting &= ~3; - } - break; - } -#ifdef module_param_array - } else { - adapter->rx_itr_setting = opt.def; - } -#endif - adapter->tx_itr_setting = adapter->rx_itr_setting; - } - { /* Interrupt Mode */ - struct igb_option opt = { - .type = range_option, - .name = "Interrupt Mode", - .err = "defaulting to 2 (MSI-X)", - .def = IGB_INT_MODE_MSIX, - .arg = { .r = { .min = MIN_INTMODE, - .max = MAX_INTMODE } } - }; - -#ifdef module_param_array - if (num_IntMode > bd) { -#endif - unsigned int int_mode = IntMode[bd]; - igb_validate_option(&int_mode, &opt, adapter); - adapter->int_mode = int_mode; -#ifdef module_param_array - } else { - adapter->int_mode = opt.def; - } -#endif - } - { /* Low Latency Interrupt TCP Port */ - struct igb_option opt = { - .type = range_option, - .name = "Low Latency Interrupt TCP Port", - .err = "using default of " __MODULE_STRING(DEFAULT_LLIPORT), - .def = DEFAULT_LLIPORT, - .arg = { .r = { .min = MIN_LLIPORT, - .max = MAX_LLIPORT } } - }; - -#ifdef module_param_array - if (num_LLIPort > bd) { -#endif - adapter->lli_port = LLIPort[bd]; - if (adapter->lli_port) { - igb_validate_option(&adapter->lli_port, &opt, - adapter); - } else { - DPRINTK(PROBE, INFO, "%s turned off\n", - opt.name); - } -#ifdef module_param_array - } else { - adapter->lli_port = opt.def; - } -#endif - } - { /* Low Latency Interrupt on Packet Size */ - struct igb_option opt = { - .type = range_option, - .name = "Low Latency Interrupt on Packet Size", - .err = "using default of " __MODULE_STRING(DEFAULT_LLISIZE), - .def = DEFAULT_LLISIZE, - .arg = { .r = { .min = MIN_LLISIZE, - .max = MAX_LLISIZE } } - }; - -#ifdef module_param_array - if (num_LLISize > bd) { -#endif - adapter->lli_size = LLISize[bd]; - if (adapter->lli_size) { - igb_validate_option(&adapter->lli_size, &opt, - adapter); - } else { - DPRINTK(PROBE, INFO, "%s turned off\n", - opt.name); - } -#ifdef module_param_array - } else { - adapter->lli_size = opt.def; - } -#endif - } - { /* Low Latency Interrupt on TCP Push flag */ - struct igb_option opt = { - .type = enable_option, - .name = "Low Latency Interrupt on TCP Push flag", - .err = "defaulting to Disabled", - .def = OPTION_DISABLED - }; - -#ifdef module_param_array - if (num_LLIPush > bd) { -#endif - unsigned int lli_push = LLIPush[bd]; - igb_validate_option(&lli_push, &opt, adapter); - adapter->flags |= lli_push ? IGB_FLAG_LLI_PUSH : 0; -#ifdef module_param_array - } else { - adapter->flags |= opt.def ? IGB_FLAG_LLI_PUSH : 0; - } -#endif - } - { /* SRIOV - Enable SR-IOV VF devices */ - struct igb_option opt = { - .type = range_option, - .name = "max_vfs - SR-IOV VF devices", - .err = "using default of " __MODULE_STRING(DEFAULT_SRIOV), - .def = DEFAULT_SRIOV, - .arg = { .r = { .min = MIN_SRIOV, - .max = MAX_SRIOV } } - }; - -#ifdef module_param_array - if (num_max_vfs > bd) { -#endif - adapter->vfs_allocated_count = max_vfs[bd]; - igb_validate_option(&adapter->vfs_allocated_count, &opt, adapter); - -#ifdef module_param_array - } else { - adapter->vfs_allocated_count = opt.def; - } -#endif - if (adapter->vfs_allocated_count) { - switch (hw->mac.type) { - case e1000_82575: - case e1000_82580: - case e1000_i210: - case e1000_i211: - case e1000_i354: - adapter->vfs_allocated_count = 0; - DPRINTK(PROBE, INFO, "SR-IOV option max_vfs not supported.\n"); - default: - break; - } - } - } - { /* VMDQ - Enable VMDq multiqueue receive */ - struct igb_option opt = { - .type = range_option, - .name = "VMDQ - VMDq multiqueue queue count", - .err = "using default of " __MODULE_STRING(DEFAULT_VMDQ), - .def = DEFAULT_VMDQ, - .arg = { .r = { .min = MIN_VMDQ, - .max = (MAX_VMDQ - adapter->vfs_allocated_count) } } - }; - if ((hw->mac.type != e1000_i210) || - (hw->mac.type != e1000_i211)) { -#ifdef module_param_array - if (num_VMDQ > bd) { -#endif - adapter->vmdq_pools = (VMDQ[bd] == 1 ? 0 : VMDQ[bd]); - if (adapter->vfs_allocated_count && !adapter->vmdq_pools) { - DPRINTK(PROBE, INFO, "Enabling SR-IOV requires VMDq be set to at least 1\n"); - adapter->vmdq_pools = 1; - } - igb_validate_option(&adapter->vmdq_pools, &opt, adapter); - -#ifdef module_param_array - } else { - if (!adapter->vfs_allocated_count) - adapter->vmdq_pools = (opt.def == 1 ? 0 : opt.def); - else - adapter->vmdq_pools = 1; - } -#endif -#ifdef CONFIG_IGB_VMDQ_NETDEV - if (hw->mac.type == e1000_82575 && adapter->vmdq_pools) { - DPRINTK(PROBE, INFO, "VMDq not supported on this part.\n"); - adapter->vmdq_pools = 0; - } -#endif - - } else { - DPRINTK(PROBE, INFO, "VMDq option is not supported.\n"); - adapter->vmdq_pools = opt.def; - } - } - { /* RSS - Enable RSS multiqueue receives */ - struct igb_option opt = { - .type = range_option, - .name = "RSS - RSS multiqueue receive count", - .err = "using default of " __MODULE_STRING(DEFAULT_RSS), - .def = DEFAULT_RSS, - .arg = { .r = { .min = MIN_RSS, - .max = MAX_RSS } } - }; - - switch (hw->mac.type) { - case e1000_82575: -#ifndef CONFIG_IGB_VMDQ_NETDEV - if (!!adapter->vmdq_pools) { - if (adapter->vmdq_pools <= 2) { - if (adapter->vmdq_pools == 2) - opt.arg.r.max = 3; - } else { - opt.arg.r.max = 1; - } - } else { - opt.arg.r.max = 4; - } -#else - opt.arg.r.max = !!adapter->vmdq_pools ? 1 : 4; -#endif /* CONFIG_IGB_VMDQ_NETDEV */ - break; - case e1000_i210: - opt.arg.r.max = 4; - break; - case e1000_i211: - opt.arg.r.max = 2; - break; - case e1000_82576: -#ifndef CONFIG_IGB_VMDQ_NETDEV - if (!!adapter->vmdq_pools) - opt.arg.r.max = 2; - break; -#endif /* CONFIG_IGB_VMDQ_NETDEV */ - case e1000_82580: - case e1000_i350: - case e1000_i354: - default: - if (!!adapter->vmdq_pools) - opt.arg.r.max = 1; - break; - } - - if (adapter->int_mode != IGB_INT_MODE_MSIX) { - DPRINTK(PROBE, INFO, "RSS is not supported when in MSI/Legacy Interrupt mode, %s\n", - opt.err); - opt.arg.r.max = 1; - } - -#ifdef module_param_array - if (num_RSS > bd) { -#endif - adapter->rss_queues = RSS[bd]; - switch (adapter->rss_queues) { - case 1: - break; - default: - igb_validate_option(&adapter->rss_queues, &opt, adapter); - if (adapter->rss_queues) - break; - case 0: - adapter->rss_queues = min_t(u32, opt.arg.r.max, num_online_cpus()); - break; - } -#ifdef module_param_array - } else { - adapter->rss_queues = opt.def; - } -#endif - } - { /* QueuePairs - Enable Tx/Rx queue pairs for interrupt handling */ - struct igb_option opt = { - .type = enable_option, - .name = "QueuePairs - Tx/Rx queue pairs for interrupt handling", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; -#ifdef module_param_array - if (num_QueuePairs > bd) { -#endif - unsigned int qp = QueuePairs[bd]; - /* - * We must enable queue pairs if the number of queues - * exceeds the number of available interrupts. We are - * limited to 10, or 3 per unallocated vf. On I210 and - * I211 devices, we are limited to 5 interrupts. - * However, since I211 only supports 2 queues, we do not - * need to check and override the user option. - */ - if (qp == OPTION_DISABLED) { - if (adapter->rss_queues > 4) - qp = OPTION_ENABLED; - - if (adapter->vmdq_pools > 4) - qp = OPTION_ENABLED; - - if (adapter->rss_queues > 1 && - (adapter->vmdq_pools > 3 || - adapter->vfs_allocated_count > 6)) - qp = OPTION_ENABLED; - - if (hw->mac.type == e1000_i210 && - adapter->rss_queues > 2) - qp = OPTION_ENABLED; - - if (qp == OPTION_ENABLED) - DPRINTK(PROBE, INFO, "Number of queues exceeds available interrupts, %s\n", - opt.err); - } - igb_validate_option(&qp, &opt, adapter); - adapter->flags |= qp ? IGB_FLAG_QUEUE_PAIRS : 0; -#ifdef module_param_array - } else { - adapter->flags |= opt.def ? IGB_FLAG_QUEUE_PAIRS : 0; - } -#endif - } - { /* EEE - Enable EEE for capable adapters */ - - if (hw->mac.type >= e1000_i350) { - struct igb_option opt = { - .type = enable_option, - .name = "EEE Support", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; -#ifdef module_param_array - if (num_EEE > bd) { -#endif - unsigned int eee = EEE[bd]; - igb_validate_option(&eee, &opt, adapter); - adapter->flags |= eee ? IGB_FLAG_EEE : 0; - if (eee) - hw->dev_spec._82575.eee_disable = false; - else - hw->dev_spec._82575.eee_disable = true; - -#ifdef module_param_array - } else { - adapter->flags |= opt.def ? IGB_FLAG_EEE : 0; - if (adapter->flags & IGB_FLAG_EEE) - hw->dev_spec._82575.eee_disable = false; - else - hw->dev_spec._82575.eee_disable = true; - } -#endif - } - } - { /* DMAC - Enable DMA Coalescing for capable adapters */ - - if (hw->mac.type >= e1000_i350) { - struct igb_opt_list list [] = { - { IGB_DMAC_DISABLE, "DMAC Disable"}, - { IGB_DMAC_MIN, "DMAC 250 usec"}, - { IGB_DMAC_500, "DMAC 500 usec"}, - { IGB_DMAC_EN_DEFAULT, "DMAC 1000 usec"}, - { IGB_DMAC_2000, "DMAC 2000 usec"}, - { IGB_DMAC_3000, "DMAC 3000 usec"}, - { IGB_DMAC_4000, "DMAC 4000 usec"}, - { IGB_DMAC_5000, "DMAC 5000 usec"}, - { IGB_DMAC_6000, "DMAC 6000 usec"}, - { IGB_DMAC_7000, "DMAC 7000 usec"}, - { IGB_DMAC_8000, "DMAC 8000 usec"}, - { IGB_DMAC_9000, "DMAC 9000 usec"}, - { IGB_DMAC_MAX, "DMAC 10000 usec"} - }; - struct igb_option opt = { - .type = list_option, - .name = "DMA Coalescing", - .err = "using default of "__MODULE_STRING(IGB_DMAC_DISABLE), - .def = IGB_DMAC_DISABLE, - .arg = { .l = { .nr = 13, - .p = list - } - } - }; -#ifdef module_param_array - if (num_DMAC > bd) { -#endif - unsigned int dmac = DMAC[bd]; - if (adapter->rx_itr_setting == IGB_DMAC_DISABLE) - dmac = IGB_DMAC_DISABLE; - igb_validate_option(&dmac, &opt, adapter); - switch (dmac) { - case IGB_DMAC_DISABLE: - adapter->dmac = dmac; - break; - case IGB_DMAC_MIN: - adapter->dmac = dmac; - break; - case IGB_DMAC_500: - adapter->dmac = dmac; - break; - case IGB_DMAC_EN_DEFAULT: - adapter->dmac = dmac; - break; - case IGB_DMAC_2000: - adapter->dmac = dmac; - break; - case IGB_DMAC_3000: - adapter->dmac = dmac; - break; - case IGB_DMAC_4000: - adapter->dmac = dmac; - break; - case IGB_DMAC_5000: - adapter->dmac = dmac; - break; - case IGB_DMAC_6000: - adapter->dmac = dmac; - break; - case IGB_DMAC_7000: - adapter->dmac = dmac; - break; - case IGB_DMAC_8000: - adapter->dmac = dmac; - break; - case IGB_DMAC_9000: - adapter->dmac = dmac; - break; - case IGB_DMAC_MAX: - adapter->dmac = dmac; - break; - default: - adapter->dmac = opt.def; - DPRINTK(PROBE, INFO, - "Invalid DMAC setting, " - "resetting DMAC to %d\n", opt.def); - } -#ifdef module_param_array - } else - adapter->dmac = opt.def; -#endif - } - } -#ifndef IGB_NO_LRO - { /* LRO - Enable Large Receive Offload */ - struct igb_option opt = { - .type = enable_option, - .name = "LRO - Large Receive Offload", - .err = "defaulting to Disabled", - .def = OPTION_DISABLED - }; - struct net_device *netdev = adapter->netdev; -#ifdef module_param_array - if (num_LRO > bd) { -#endif - unsigned int lro = LRO[bd]; - igb_validate_option(&lro, &opt, adapter); - netdev->features |= lro ? NETIF_F_LRO : 0; -#ifdef module_param_array - } else if (opt.def == OPTION_ENABLED) { - netdev->features |= NETIF_F_LRO; - } -#endif - } -#endif /* IGB_NO_LRO */ - { /* MDD - Enable Malicious Driver Detection. Only available when - SR-IOV is enabled. */ - struct igb_option opt = { - .type = enable_option, - .name = "Malicious Driver Detection", - .err = "defaulting to 1", - .def = OPTION_ENABLED, - .arg = { .r = { .min = OPTION_DISABLED, - .max = OPTION_ENABLED } } - }; - -#ifdef module_param_array - if (num_MDD > bd) { -#endif - adapter->mdd = MDD[bd]; - igb_validate_option((uint *)&adapter->mdd, &opt, - adapter); -#ifdef module_param_array - } else { - adapter->mdd = opt.def; - } -#endif - } -} diff --git a/kernel/linux/kni/ethtool/igb/igb_regtest.h b/kernel/linux/kni/ethtool/igb/igb_regtest.h deleted file mode 100644 index ec2b86a0e1..0000000000 --- a/kernel/linux/kni/ethtool/igb/igb_regtest.h +++ /dev/null @@ -1,234 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/* ethtool register test data */ -struct igb_reg_test { - u16 reg; - u16 reg_offset; - u16 array_len; - u16 test_type; - u32 mask; - u32 write; -}; - -/* In the hardware, registers are laid out either singly, in arrays - * spaced 0x100 bytes apart, or in contiguous tables. We assume - * most tests take place on arrays or single registers (handled - * as a single-element array) and special-case the tables. - * Table tests are always pattern tests. - * - * We also make provision for some required setup steps by specifying - * registers to be written without any read-back testing. - */ - -#define PATTERN_TEST 1 -#define SET_READ_TEST 2 -#define WRITE_NO_TEST 3 -#define TABLE32_TEST 4 -#define TABLE64_TEST_LO 5 -#define TABLE64_TEST_HI 6 - -/* i210 reg test */ -static struct igb_reg_test reg_test_i210[] = { - { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - /* RDH is read-only for i210, only test RDT. */ - { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0003FFF0, 0x0003FFF0 }, - { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, - { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, - { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RA, 0, 16, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA, 0, 16, TABLE64_TEST_HI, - 0x900FFFFF, 0xFFFFFFFF }, - { E1000_MTA, 0, 128, TABLE32_TEST, - 0xFFFFFFFF, 0xFFFFFFFF }, - { 0, 0, 0, 0 } -}; - -/* i350 reg test */ -static struct igb_reg_test reg_test_i350[] = { - { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - /* VET is readonly on i350 */ - { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - /* RDH is read-only for i350, only test RDT. */ - { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, - { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, - { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, - { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RA, 0, 16, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA, 0, 16, TABLE64_TEST_HI, - 0xC3FFFFFF, 0xFFFFFFFF }, - { E1000_RA2, 0, 16, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA2, 0, 16, TABLE64_TEST_HI, - 0xC3FFFFFF, 0xFFFFFFFF }, - { E1000_MTA, 0, 128, TABLE32_TEST, - 0xFFFFFFFF, 0xFFFFFFFF }, - { 0, 0, 0, 0 } -}; - -/* 82580 reg test */ -static struct igb_reg_test reg_test_82580[] = { - { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - /* RDH is read-only for 82580, only test RDT. */ - { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, - { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, - { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, - { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RA, 0, 16, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA, 0, 16, TABLE64_TEST_HI, - 0x83FFFFFF, 0xFFFFFFFF }, - { E1000_RA2, 0, 8, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA2, 0, 8, TABLE64_TEST_HI, - 0x83FFFFFF, 0xFFFFFFFF }, - { E1000_MTA, 0, 128, TABLE32_TEST, - 0xFFFFFFFF, 0xFFFFFFFF }, - { 0, 0, 0, 0 } -}; - -/* 82576 reg test */ -static struct igb_reg_test reg_test_82576[] = { - { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - { E1000_RDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - /* Enable all queues before testing. */ - { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, - { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, - /* RDH is read-only for 82576, only test RDT. */ - { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RDT(4), 0x40, 12, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, - { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, 0 }, - { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, - { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, - { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - { E1000_TDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, - { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RA, 0, 16, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA, 0, 16, TABLE64_TEST_HI, - 0x83FFFFFF, 0xFFFFFFFF }, - { E1000_RA2, 0, 8, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA2, 0, 8, TABLE64_TEST_HI, - 0x83FFFFFF, 0xFFFFFFFF }, - { E1000_MTA, 0, 128, TABLE32_TEST, - 0xFFFFFFFF, 0xFFFFFFFF }, - { 0, 0, 0, 0 } -}; - -/* 82575 register test */ -static struct igb_reg_test reg_test_82575[] = { - { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - /* Enable all four RX queues before testing. */ - { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, - /* RDH is read-only for 82575, only test RDT. */ - { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, - { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, - { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, - { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, - { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, - { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, - { E1000_RA, 0, 16, TABLE64_TEST_LO, - 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA, 0, 16, TABLE64_TEST_HI, - 0x800FFFFF, 0xFFFFFFFF }, - { E1000_MTA, 0, 128, TABLE32_TEST, - 0xFFFFFFFF, 0xFFFFFFFF }, - { 0, 0, 0, 0 } -}; diff --git a/kernel/linux/kni/ethtool/igb/igb_vmdq.c b/kernel/linux/kni/ethtool/igb/igb_vmdq.c deleted file mode 100644 index cdd807b96c..0000000000 --- a/kernel/linux/kni/ethtool/igb/igb_vmdq.c +++ /dev/null @@ -1,421 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - - -#include - -#include "igb.h" -#include "igb_vmdq.h" -#include - -#ifdef CONFIG_IGB_VMDQ_NETDEV -int igb_vmdq_open(struct net_device *dev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - struct net_device *main_netdev = adapter->netdev; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - if (test_bit(__IGB_DOWN, &adapter->state)) { - DPRINTK(DRV, WARNING, - "Open %s before opening this device.\n", - main_netdev->name); - return -EAGAIN; - } - netif_carrier_off(dev); - vadapter->tx_ring->vmdq_netdev = dev; - vadapter->rx_ring->vmdq_netdev = dev; - if (is_valid_ether_addr(dev->dev_addr)) { - igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); - igb_add_mac_filter(adapter, dev->dev_addr, hw_queue); - } - netif_carrier_on(dev); - return 0; -} - -int igb_vmdq_close(struct net_device *dev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - netif_carrier_off(dev); - igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); - - vadapter->tx_ring->vmdq_netdev = NULL; - vadapter->rx_ring->vmdq_netdev = NULL; - return 0; -} - -netdev_tx_t igb_vmdq_xmit_frame(struct sk_buff *skb, struct net_device *dev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - - return igb_xmit_frame_ring(skb, vadapter->tx_ring); -} - -struct net_device_stats *igb_vmdq_get_stats(struct net_device *dev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - struct e1000_hw *hw = &adapter->hw; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - vadapter->net_stats.rx_packets += - E1000_READ_REG(hw, E1000_PFVFGPRC(hw_queue)); - E1000_WRITE_REG(hw, E1000_PFVFGPRC(hw_queue), 0); - vadapter->net_stats.tx_packets += - E1000_READ_REG(hw, E1000_PFVFGPTC(hw_queue)); - E1000_WRITE_REG(hw, E1000_PFVFGPTC(hw_queue), 0); - vadapter->net_stats.rx_bytes += - E1000_READ_REG(hw, E1000_PFVFGORC(hw_queue)); - E1000_WRITE_REG(hw, E1000_PFVFGORC(hw_queue), 0); - vadapter->net_stats.tx_bytes += - E1000_READ_REG(hw, E1000_PFVFGOTC(hw_queue)); - E1000_WRITE_REG(hw, E1000_PFVFGOTC(hw_queue), 0); - vadapter->net_stats.multicast += - E1000_READ_REG(hw, E1000_PFVFMPRC(hw_queue)); - E1000_WRITE_REG(hw, E1000_PFVFMPRC(hw_queue), 0); - /* only return the current stats */ - return &vadapter->net_stats; -} - -/** - * igb_write_vm_addr_list - write unicast addresses to RAR table - * @netdev: network interface device structure - * - * Writes unicast address list to the RAR table. - * Returns: -ENOMEM on failure/insufficient address space - * 0 on no addresses written - * X on writing X addresses to the RAR table - **/ -static int igb_write_vm_addr_list(struct net_device *netdev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); - struct igb_adapter *adapter = vadapter->real_adapter; - int count = 0; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - /* return ENOMEM indicating insufficient memory for addresses */ - if (netdev_uc_count(netdev) > igb_available_rars(adapter)) - return -ENOMEM; - - if (!netdev_uc_empty(netdev)) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - struct netdev_hw_addr *ha; -#else - struct dev_mc_list *ha; -#endif - netdev_for_each_uc_addr(ha, netdev) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - igb_del_mac_filter(adapter, ha->addr, hw_queue); - igb_add_mac_filter(adapter, ha->addr, hw_queue); -#else - igb_del_mac_filter(adapter, ha->da_addr, hw_queue); - igb_add_mac_filter(adapter, ha->da_addr, hw_queue); -#endif - count++; - } - } - return count; -} - - -#define E1000_VMOLR_UPE 0x20000000 /* Unicast promiscuous mode */ -void igb_vmdq_set_rx_mode(struct net_device *dev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - struct e1000_hw *hw = &adapter->hw; - u32 vmolr, rctl; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - /* Check for Promiscuous and All Multicast modes */ - vmolr = E1000_READ_REG(hw, E1000_VMOLR(hw_queue)); - - /* clear the affected bits */ - vmolr &= ~(E1000_VMOLR_UPE | E1000_VMOLR_MPME | - E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE); - - if (dev->flags & IFF_PROMISC) { - vmolr |= E1000_VMOLR_UPE; - rctl = E1000_READ_REG(hw, E1000_RCTL); - rctl |= E1000_RCTL_UPE; - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - } else { - rctl = E1000_READ_REG(hw, E1000_RCTL); - rctl &= ~E1000_RCTL_UPE; - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - if (dev->flags & IFF_ALLMULTI) { - vmolr |= E1000_VMOLR_MPME; - } else { - /* - * Write addresses to the MTA, if the attempt fails - * then we should just turn on promiscuous mode so - * that we can at least receive multicast traffic - */ - if (igb_write_mc_addr_list(adapter->netdev) != 0) - vmolr |= E1000_VMOLR_ROMPE; - } -#ifdef HAVE_SET_RX_MODE - /* - * Write addresses to available RAR registers, if there is not - * sufficient space to store all the addresses then enable - * unicast promiscuous mode - */ - if (igb_write_vm_addr_list(dev) < 0) - vmolr |= E1000_VMOLR_UPE; -#endif - } - E1000_WRITE_REG(hw, E1000_VMOLR(hw_queue), vmolr); - - return; -} - -int igb_vmdq_set_mac(struct net_device *dev, void *p) -{ - struct sockaddr *addr = p; - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - return igb_add_mac_filter(adapter, dev->dev_addr, hw_queue); -} - -int igb_vmdq_change_mtu(struct net_device *dev, int new_mtu) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - - if (adapter->netdev->mtu < new_mtu) { - DPRINTK(PROBE, INFO, - "Set MTU on %s to >= %d " - "before changing MTU on %s\n", - adapter->netdev->name, new_mtu, dev->name); - return -EINVAL; - } - dev->mtu = new_mtu; - return 0; -} - -void igb_vmdq_tx_timeout(struct net_device *dev) -{ - return; -} - -void igb_vmdq_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - struct e1000_hw *hw = &adapter->hw; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - vadapter->vlgrp = grp; - - igb_enable_vlan_tags(adapter); - E1000_WRITE_REG(hw, E1000_VMVIR(hw_queue), 0); - - return; -} -void igb_vmdq_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; -#ifndef HAVE_NETDEV_VLAN_FEATURES - struct net_device *v_netdev; -#endif - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - /* attempt to add filter to vlvf array */ - igb_vlvf_set(adapter, vid, TRUE, hw_queue); - -#ifndef HAVE_NETDEV_VLAN_FEATURES - - /* Copy feature flags from netdev to the vlan netdev for this vid. - * This allows things like TSO to bubble down to our vlan device. - */ - v_netdev = vlan_group_get_device(vadapter->vlgrp, vid); - v_netdev->features |= adapter->netdev->features; - vlan_group_set_device(vadapter->vlgrp, vid, v_netdev); -#endif - - return; -} -void igb_vmdq_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(dev); - struct igb_adapter *adapter = vadapter->real_adapter; - int hw_queue = vadapter->rx_ring->queue_index + - adapter->vfs_allocated_count; - - vlan_group_set_device(vadapter->vlgrp, vid, NULL); - /* remove vlan from VLVF table array */ - igb_vlvf_set(adapter, vid, FALSE, hw_queue); - - - return; -} - -static int igb_vmdq_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); - struct igb_adapter *adapter = vadapter->real_adapter; - struct e1000_hw *hw = &adapter->hw; - u32 status; - - if (hw->phy.media_type == e1000_media_type_copper) { - - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full| - SUPPORTED_Autoneg | - SUPPORTED_TP); - ecmd->advertising = ADVERTISED_TP; - - if (hw->mac.autoneg == 1) { - ecmd->advertising |= ADVERTISED_Autoneg; - /* the e1000 autoneg seems to match ethtool nicely */ - ecmd->advertising |= hw->phy.autoneg_advertised; - } - - ecmd->port = PORT_TP; - ecmd->phy_address = hw->phy.addr; - } else { - ecmd->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg); - - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE | - ADVERTISED_Autoneg); - - ecmd->port = PORT_FIBRE; - } - - ecmd->transceiver = XCVR_INTERNAL; - - status = E1000_READ_REG(hw, E1000_STATUS); - - if (status & E1000_STATUS_LU) { - - if ((status & E1000_STATUS_SPEED_1000) || - hw->phy.media_type != e1000_media_type_copper) - ecmd->speed = SPEED_1000; - else if (status & E1000_STATUS_SPEED_100) - ecmd->speed = SPEED_100; - else - ecmd->speed = SPEED_10; - - if ((status & E1000_STATUS_FD) || - hw->phy.media_type != e1000_media_type_copper) - ecmd->duplex = DUPLEX_FULL; - else - ecmd->duplex = DUPLEX_HALF; - } else { - ecmd->speed = -1; - ecmd->duplex = -1; - } - - ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; - return 0; -} - - -static u32 igb_vmdq_get_msglevel(struct net_device *netdev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); - struct igb_adapter *adapter = vadapter->real_adapter; - return adapter->msg_enable; -} - -static void igb_vmdq_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); - struct igb_adapter *adapter = vadapter->real_adapter; - struct net_device *main_netdev = adapter->netdev; - - strncpy(drvinfo->driver, igb_driver_name, 32); - strncpy(drvinfo->version, igb_driver_version, 32); - - strncpy(drvinfo->fw_version, "N/A", 4); - snprintf(drvinfo->bus_info, 32, "%s VMDQ %d", main_netdev->name, - vadapter->rx_ring->queue_index); - drvinfo->n_stats = 0; - drvinfo->testinfo_len = 0; - drvinfo->regdump_len = 0; -} - -static void igb_vmdq_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); - - struct igb_ring *tx_ring = vadapter->tx_ring; - struct igb_ring *rx_ring = vadapter->rx_ring; - - ring->rx_max_pending = IGB_MAX_RXD; - ring->tx_max_pending = IGB_MAX_TXD; - ring->rx_mini_max_pending = 0; - ring->rx_jumbo_max_pending = 0; - ring->rx_pending = rx_ring->count; - ring->tx_pending = tx_ring->count; - ring->rx_mini_pending = 0; - ring->rx_jumbo_pending = 0; -} -static u32 igb_vmdq_get_rx_csum(struct net_device *netdev) -{ - struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); - struct igb_adapter *adapter = vadapter->real_adapter; - - return test_bit(IGB_RING_FLAG_RX_CSUM, &adapter->rx_ring[0]->flags); -} - - -static struct ethtool_ops igb_vmdq_ethtool_ops = { - .get_settings = igb_vmdq_get_settings, - .get_drvinfo = igb_vmdq_get_drvinfo, - .get_link = ethtool_op_get_link, - .get_ringparam = igb_vmdq_get_ringparam, - .get_rx_csum = igb_vmdq_get_rx_csum, - .get_tx_csum = ethtool_op_get_tx_csum, - .get_sg = ethtool_op_get_sg, - .set_sg = ethtool_op_set_sg, - .get_msglevel = igb_vmdq_get_msglevel, -#ifdef NETIF_F_TSO - .get_tso = ethtool_op_get_tso, -#endif -#ifdef HAVE_ETHTOOL_GET_PERM_ADDR - .get_perm_addr = ethtool_op_get_perm_addr, -#endif -}; - -void igb_vmdq_set_ethtool_ops(struct net_device *netdev) -{ - SET_ETHTOOL_OPS(netdev, &igb_vmdq_ethtool_ops); -} - - -#endif /* CONFIG_IGB_VMDQ_NETDEV */ diff --git a/kernel/linux/kni/ethtool/igb/igb_vmdq.h b/kernel/linux/kni/ethtool/igb/igb_vmdq.h deleted file mode 100644 index e68c48cfea..0000000000 --- a/kernel/linux/kni/ethtool/igb/igb_vmdq.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IGB_VMDQ_H_ -#define _IGB_VMDQ_H_ - -#ifdef CONFIG_IGB_VMDQ_NETDEV -int igb_vmdq_open(struct net_device *dev); -int igb_vmdq_close(struct net_device *dev); -netdev_tx_t igb_vmdq_xmit_frame(struct sk_buff *skb, struct net_device *dev); -struct net_device_stats *igb_vmdq_get_stats(struct net_device *dev); -void igb_vmdq_set_rx_mode(struct net_device *dev); -int igb_vmdq_set_mac(struct net_device *dev, void *addr); -int igb_vmdq_change_mtu(struct net_device *dev, int new_mtu); -void igb_vmdq_tx_timeout(struct net_device *dev); -void igb_vmdq_vlan_rx_register(struct net_device *dev, - struct vlan_group *grp); -void igb_vmdq_vlan_rx_add_vid(struct net_device *dev, unsigned short vid); -void igb_vmdq_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid); -void igb_vmdq_set_ethtool_ops(struct net_device *netdev); -#endif /* CONFIG_IGB_VMDQ_NETDEV */ -#endif /* _IGB_VMDQ_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/kcompat.h b/kernel/linux/kni/ethtool/igb/kcompat.h deleted file mode 100644 index 649a69c814..0000000000 --- a/kernel/linux/kni/ethtool/igb/kcompat.h +++ /dev/null @@ -1,3956 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _KCOMPAT_H_ -#define _KCOMPAT_H_ - -#ifndef LINUX_VERSION_CODE -#include -#else -#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* NAPI enable/disable flags here */ -#define NAPI - -#define adapter_struct igb_adapter -#define adapter_q_vector igb_q_vector -#define NAPI - -/* and finally set defines so that the code sees the changes */ -#ifdef NAPI -#else -#endif /* NAPI */ - -/* packet split disable/enable */ -#ifdef DISABLE_PACKET_SPLIT -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT -#define CONFIG_IGB_DISABLE_PACKET_SPLIT -#endif -#endif /* DISABLE_PACKET_SPLIT */ - -/* MSI compatibility code for all kernels and drivers */ -#ifdef DISABLE_PCI_MSI -#undef CONFIG_PCI_MSI -#endif -#ifndef CONFIG_PCI_MSI -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) -struct msix_entry { - u16 vector; /* kernel uses to write allocated vector */ - u16 entry; /* driver uses to specify entry, OS writes */ -}; -#endif -#undef pci_enable_msi -#define pci_enable_msi(a) -ENOTSUPP -#undef pci_disable_msi -#define pci_disable_msi(a) do {} while (0) -#undef pci_enable_msix -#define pci_enable_msix(a, b, c) -ENOTSUPP -#undef pci_disable_msix -#define pci_disable_msix(a) do {} while (0) -#define msi_remove_pci_irq_vectors(a) do {} while (0) -#endif /* CONFIG_PCI_MSI */ -#ifdef DISABLE_PM -#undef CONFIG_PM -#endif - -#ifdef DISABLE_NET_POLL_CONTROLLER -#undef CONFIG_NET_POLL_CONTROLLER -#endif - -#ifndef PMSG_SUSPEND -#define PMSG_SUSPEND 3 -#endif - -/* generic boolean compatibility */ -#undef TRUE -#undef FALSE -#define TRUE true -#define FALSE false -#ifdef GCC_VERSION -#if ( GCC_VERSION < 3000 ) -#define _Bool char -#endif -#else -#define _Bool char -#endif - -/* kernels less than 2.4.14 don't have this */ -#ifndef ETH_P_8021Q -#define ETH_P_8021Q 0x8100 -#endif - -#ifndef module_param -#define module_param(v,t,p) MODULE_PARM(v, "i"); -#endif - -#ifndef DMA_64BIT_MASK -#define DMA_64BIT_MASK 0xffffffffffffffffULL -#endif - -#ifndef DMA_32BIT_MASK -#define DMA_32BIT_MASK 0x00000000ffffffffULL -#endif - -#ifndef PCI_CAP_ID_EXP -#define PCI_CAP_ID_EXP 0x10 -#endif - -#ifndef PCIE_LINK_STATE_L0S -#define PCIE_LINK_STATE_L0S 1 -#endif -#ifndef PCIE_LINK_STATE_L1 -#define PCIE_LINK_STATE_L1 2 -#endif - -#ifndef mmiowb -#ifdef CONFIG_IA64 -#define mmiowb() asm volatile ("mf.a" ::: "memory") -#else -#define mmiowb() -#endif -#endif - -#ifndef SET_NETDEV_DEV -#define SET_NETDEV_DEV(net, pdev) -#endif - -#if !defined(HAVE_FREE_NETDEV) && ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) -#define free_netdev(x) kfree(x) -#endif - -#ifdef HAVE_POLL_CONTROLLER -#define CONFIG_NET_POLL_CONTROLLER -#endif - -#ifndef SKB_DATAREF_SHIFT -/* if we do not have the infrastructure to detect if skb_header is cloned - just return false in all cases */ -#define skb_header_cloned(x) 0 -#endif - -#ifndef NETIF_F_GSO -#define gso_size tso_size -#define gso_segs tso_segs -#endif - -#ifndef NETIF_F_GRO -#define vlan_gro_receive(_napi, _vlgrp, _vlan, _skb) \ - vlan_hwaccel_receive_skb(_skb, _vlgrp, _vlan) -#define napi_gro_receive(_napi, _skb) netif_receive_skb(_skb) -#endif - -#ifndef NETIF_F_SCTP_CSUM -#define NETIF_F_SCTP_CSUM 0 -#endif - -#ifndef NETIF_F_LRO -#define NETIF_F_LRO (1 << 15) -#endif - -#ifndef NETIF_F_NTUPLE -#define NETIF_F_NTUPLE (1 << 27) -#endif - -#ifndef IPPROTO_SCTP -#define IPPROTO_SCTP 132 -#endif - -#ifndef CHECKSUM_PARTIAL -#define CHECKSUM_PARTIAL CHECKSUM_HW -#define CHECKSUM_COMPLETE CHECKSUM_HW -#endif - -#ifndef __read_mostly -#define __read_mostly -#endif - -#ifndef MII_RESV1 -#define MII_RESV1 0x17 /* Reserved... */ -#endif - -#ifndef unlikely -#define unlikely(_x) _x -#define likely(_x) _x -#endif - -#ifndef WARN_ON -#define WARN_ON(x) -#endif - -#ifndef PCI_DEVICE -#define PCI_DEVICE(vend,dev) \ - .vendor = (vend), .device = (dev), \ - .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID -#endif - -#ifndef node_online -#define node_online(node) ((node) == 0) -#endif - -#ifndef num_online_cpus -#define num_online_cpus() smp_num_cpus -#endif - -#ifndef cpu_online -#define cpu_online(cpuid) test_bit((cpuid), &cpu_online_map) -#endif - -#ifndef _LINUX_RANDOM_H -#include -#endif - -#ifndef DECLARE_BITMAP -#ifndef BITS_TO_LONGS -#define BITS_TO_LONGS(bits) (((bits)+BITS_PER_LONG-1)/BITS_PER_LONG) -#endif -#define DECLARE_BITMAP(name,bits) long name[BITS_TO_LONGS(bits)] -#endif - -#ifndef VLAN_HLEN -#define VLAN_HLEN 4 -#endif - -#ifndef VLAN_ETH_HLEN -#define VLAN_ETH_HLEN 18 -#endif - -#ifndef VLAN_ETH_FRAME_LEN -#define VLAN_ETH_FRAME_LEN 1518 -#endif - -#if !defined(IXGBE_DCA) && !defined(IGB_DCA) -#define dca_get_tag(b) 0 -#define dca_add_requester(a) -1 -#define dca_remove_requester(b) do { } while(0) -#define DCA_PROVIDER_ADD 0x0001 -#define DCA_PROVIDER_REMOVE 0x0002 -#endif - -#ifndef DCA_GET_TAG_TWO_ARGS -#define dca3_get_tag(a,b) dca_get_tag(b) -#endif - -#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#if defined(__i386__) || defined(__x86_64__) -#define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#endif -#endif - -/* taken from 2.6.24 definition in linux/kernel.h */ -#ifndef IS_ALIGNED -#define IS_ALIGNED(x,a) (((x) % ((typeof(x))(a))) == 0) -#endif - -#ifdef IS_ENABLED -#undef IS_ENABLED -#undef __ARG_PLACEHOLDER_1 -#undef config_enabled -#undef _config_enabled -#undef __config_enabled -#undef ___config_enabled -#endif - -#define __ARG_PLACEHOLDER_1 0, -#define config_enabled(cfg) _config_enabled(cfg) -#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value) -#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0) -#define ___config_enabled(__ignored, val, ...) val - -#define IS_ENABLED(option) \ - (config_enabled(option) || config_enabled(option##_MODULE)) - -#if !defined(NETIF_F_HW_VLAN_TX) && !defined(NETIF_F_HW_VLAN_CTAG_TX) -struct _kc_vlan_ethhdr { - unsigned char h_dest[ETH_ALEN]; - unsigned char h_source[ETH_ALEN]; - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - __be16 h_vlan_encapsulated_proto; -}; -#define vlan_ethhdr _kc_vlan_ethhdr -struct _kc_vlan_hdr { - __be16 h_vlan_TCI; - __be16 h_vlan_encapsulated_proto; -}; -#define vlan_hdr _kc_vlan_hdr -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) -#define vlan_tx_tag_present(_skb) 0 -#define vlan_tx_tag_get(_skb) 0 -#endif -#endif /* NETIF_F_HW_VLAN_TX && NETIF_F_HW_VLAN_CTAG_TX */ - -#ifndef VLAN_PRIO_SHIFT -#define VLAN_PRIO_SHIFT 13 -#endif - - -#ifndef __GFP_COLD -#define __GFP_COLD 0 -#endif - -#ifndef __GFP_COMP -#define __GFP_COMP 0 -#endif - -/*****************************************************************************/ -/* Installations with ethtool version without eeprom, adapter id, or statistics - * support */ - -#ifndef ETH_GSTRING_LEN -#define ETH_GSTRING_LEN 32 -#endif - -#ifndef ETHTOOL_GSTATS -#define ETHTOOL_GSTATS 0x1d -#undef ethtool_drvinfo -#define ethtool_drvinfo k_ethtool_drvinfo -struct k_ethtool_drvinfo { - u32 cmd; - char driver[32]; - char version[32]; - char fw_version[32]; - char bus_info[32]; - char reserved1[32]; - char reserved2[16]; - u32 n_stats; - u32 testinfo_len; - u32 eedump_len; - u32 regdump_len; -}; - -struct ethtool_stats { - u32 cmd; - u32 n_stats; - u64 data[0]; -}; -#endif /* ETHTOOL_GSTATS */ - -#ifndef ETHTOOL_PHYS_ID -#define ETHTOOL_PHYS_ID 0x1c -#endif /* ETHTOOL_PHYS_ID */ - -#ifndef ETHTOOL_GSTRINGS -#define ETHTOOL_GSTRINGS 0x1b -enum ethtool_stringset { - ETH_SS_TEST = 0, - ETH_SS_STATS, -}; -struct ethtool_gstrings { - u32 cmd; /* ETHTOOL_GSTRINGS */ - u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - u32 len; /* number of strings in the string set */ - u8 data[0]; -}; -#endif /* ETHTOOL_GSTRINGS */ - -#ifndef ETHTOOL_TEST -#define ETHTOOL_TEST 0x1a -enum ethtool_test_flags { - ETH_TEST_FL_OFFLINE = (1 << 0), - ETH_TEST_FL_FAILED = (1 << 1), -}; -struct ethtool_test { - u32 cmd; - u32 flags; - u32 reserved; - u32 len; - u64 data[0]; -}; -#endif /* ETHTOOL_TEST */ - -#ifndef ETHTOOL_GEEPROM -#define ETHTOOL_GEEPROM 0xb -#undef ETHTOOL_GREGS -struct ethtool_eeprom { - u32 cmd; - u32 magic; - u32 offset; - u32 len; - u8 data[0]; -}; - -struct ethtool_value { - u32 cmd; - u32 data; -}; -#endif /* ETHTOOL_GEEPROM */ - -#ifndef ETHTOOL_GLINK -#define ETHTOOL_GLINK 0xa -#endif /* ETHTOOL_GLINK */ - -#ifndef ETHTOOL_GWOL -#define ETHTOOL_GWOL 0x5 -#define ETHTOOL_SWOL 0x6 -#define SOPASS_MAX 6 -struct ethtool_wolinfo { - u32 cmd; - u32 supported; - u32 wolopts; - u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ -}; -#endif /* ETHTOOL_GWOL */ - -#ifndef ETHTOOL_GREGS -#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers */ -#define ethtool_regs _kc_ethtool_regs -/* for passing big chunks of data */ -struct _kc_ethtool_regs { - u32 cmd; - u32 version; /* driver-specific, indicates different chips/revs */ - u32 len; /* bytes */ - u8 data[0]; -}; -#endif /* ETHTOOL_GREGS */ - -#ifndef ETHTOOL_GMSGLVL -#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#endif -#ifndef ETHTOOL_SMSGLVL -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ -#endif -#ifndef ETHTOOL_NWAY_RST -#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv */ -#endif -#ifndef ETHTOOL_GLINK -#define ETHTOOL_GLINK 0x0000000a /* Get link status */ -#endif -#ifndef ETHTOOL_GEEPROM -#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#endif -#ifndef ETHTOOL_SEEPROM -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data */ -#endif -#ifndef ETHTOOL_GCOALESCE -#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ -/* for configuring coalescing parameters of chip */ -#define ethtool_coalesce _kc_ethtool_coalesce -struct _kc_ethtool_coalesce { - u32 cmd; /* ETHTOOL_{G,S}COALESCE */ - - /* How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only rx_max_coalesced_frames - * is used. - */ - u32 rx_coalesce_usecs; - - /* How many packets to delay an RX interrupt after - * a packet arrives. If 0, only rx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause RX interrupts to never be - * generated. - */ - u32 rx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ - u32 rx_coalesce_usecs_irq; - u32 rx_max_coalesced_frames_irq; - - /* How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only tx_max_coalesced_frames - * is used. - */ - u32 tx_coalesce_usecs; - - /* How many packets to delay a TX interrupt after - * a packet is sent. If 0, only tx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause TX interrupts to never be - * generated. - */ - u32 tx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ - u32 tx_coalesce_usecs_irq; - u32 tx_max_coalesced_frames_irq; - - /* How many usecs to delay in-memory statistics - * block updates. Some drivers do not have an in-memory - * statistic block, and in such cases this value is ignored. - * This value must not be zero. - */ - u32 stats_block_coalesce_usecs; - - /* Adaptive RX/TX coalescing is an algorithm implemented by - * some drivers to improve latency under low packet rates and - * improve throughput under high packet rates. Some drivers - * only implement one of RX or TX adaptive coalescing. Anything - * not implemented by the driver causes these values to be - * silently ignored. - */ - u32 use_adaptive_rx_coalesce; - u32 use_adaptive_tx_coalesce; - - /* When the packet rate (measured in packets per second) - * is below pkt_rate_low, the {rx,tx}_*_low parameters are - * used. - */ - u32 pkt_rate_low; - u32 rx_coalesce_usecs_low; - u32 rx_max_coalesced_frames_low; - u32 tx_coalesce_usecs_low; - u32 tx_max_coalesced_frames_low; - - /* When the packet rate is below pkt_rate_high but above - * pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ - - /* When the packet rate is (measured in packets per second) - * is above pkt_rate_high, the {rx,tx}_*_high parameters are - * used. - */ - u32 pkt_rate_high; - u32 rx_coalesce_usecs_high; - u32 rx_max_coalesced_frames_high; - u32 tx_coalesce_usecs_high; - u32 tx_max_coalesced_frames_high; - - /* How often to do adaptive coalescing packet rate sampling, - * measured in seconds. Must not be zero. - */ - u32 rate_sample_interval; -}; -#endif /* ETHTOOL_GCOALESCE */ - -#ifndef ETHTOOL_SCOALESCE -#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ -#endif -#ifndef ETHTOOL_GRINGPARAM -#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ -/* for configuring RX/TX ring parameters */ -#define ethtool_ringparam _kc_ethtool_ringparam -struct _kc_ethtool_ringparam { - u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ - u32 rx_max_pending; - u32 rx_mini_max_pending; - u32 rx_jumbo_max_pending; - u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ - u32 rx_pending; - u32 rx_mini_pending; - u32 rx_jumbo_pending; - u32 tx_pending; -}; -#endif /* ETHTOOL_GRINGPARAM */ - -#ifndef ETHTOOL_SRINGPARAM -#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ -#endif -#ifndef ETHTOOL_GPAUSEPARAM -#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ -/* for configuring link flow control parameters */ -#define ethtool_pauseparam _kc_ethtool_pauseparam -struct _kc_ethtool_pauseparam { - u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ - u32 autoneg; - u32 rx_pause; - u32 tx_pause; -}; -#endif /* ETHTOOL_GPAUSEPARAM */ - -#ifndef ETHTOOL_SPAUSEPARAM -#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ -#endif -#ifndef ETHTOOL_GRXCSUM -#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_SRXCSUM -#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_GTXCSUM -#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_STXCSUM -#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_GSG -#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable - * (ethtool_value) */ -#endif -#ifndef ETHTOOL_SSG -#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable - * (ethtool_value). */ -#endif -#ifndef ETHTOOL_TEST -#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ -#endif -#ifndef ETHTOOL_GSTRINGS -#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ -#endif -#ifndef ETHTOOL_PHYS_ID -#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ -#endif -#ifndef ETHTOOL_GSTATS -#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ -#endif -#ifndef ETHTOOL_GTSO -#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_STSO -#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ -#endif - -#ifndef ETHTOOL_BUSINFO_LEN -#define ETHTOOL_BUSINFO_LEN 32 -#endif - -#ifndef RHEL_RELEASE_VERSION -#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b)) -#endif -#ifndef AX_RELEASE_VERSION -#define AX_RELEASE_VERSION(a,b) (((a) << 8) + (b)) -#endif - -#ifndef AX_RELEASE_CODE -#define AX_RELEASE_CODE 0 -#endif - -#if (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,0)) -#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,0) -#elif (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,1)) -#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,1) -#elif (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,2)) -#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,3) -#endif - -#ifndef RHEL_RELEASE_CODE -/* NOTE: RHEL_RELEASE_* introduced in RHEL4.5 */ -#define RHEL_RELEASE_CODE 0 -#endif - -/* SuSE version macro is the same as Linux kernel version */ -#ifndef SLE_VERSION -#define SLE_VERSION(a,b,c) KERNEL_VERSION(a,b,c) -#endif -#ifdef CONFIG_SUSE_KERNEL -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 57)) -/* SLES12SP3 is at least 4.4.57+ based */ -#define SLE_VERSION_CODE SLE_VERSION(12, 3, 0) -#elif ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,12,28) ) -/* SLES12 is at least 3.12.28+ based */ -#define SLE_VERSION_CODE SLE_VERSION(12,0,0) -#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,61)) && \ - (LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0))) -/* SLES11 SP3 is at least 3.0.61+ based */ -#define SLE_VERSION_CODE SLE_VERSION(11,3,0) -#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,32) ) -/* SLES11 SP1 is 2.6.32 based */ -#define SLE_VERSION_CODE SLE_VERSION(11,1,0) -#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,27) ) -/* SLES11 GA is 2.6.27 based */ -#define SLE_VERSION_CODE SLE_VERSION(11,0,0) -#endif /* LINUX_VERSION_CODE == KERNEL_VERSION(x,y,z) */ -#endif /* CONFIG_SUSE_KERNEL */ -#ifndef SLE_VERSION_CODE -#define SLE_VERSION_CODE 0 -#endif /* SLE_VERSION_CODE */ - -/* Ubuntu release and kernel codes must be specified from Makefile */ -#ifndef UBUNTU_RELEASE_VERSION -#define UBUNTU_RELEASE_VERSION(a,b) (((a) * 100) + (b)) -#endif -#ifndef UBUNTU_KERNEL_VERSION -#define UBUNTU_KERNEL_VERSION(a,b,c,abi,upload) (((a) << 40) + ((b) << 32) + ((c) << 24) + ((abi) << 8) + (upload)) -#endif -#ifndef UBUNTU_RELEASE_CODE -#define UBUNTU_RELEASE_CODE 0 -#endif -#ifndef UBUNTU_KERNEL_CODE -#define UBUNTU_KERNEL_CODE 0 -#endif - -#ifdef __KLOCWORK__ -#ifdef ARRAY_SIZE -#undef ARRAY_SIZE -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#endif -#endif /* __KLOCWORK__ */ - -/*****************************************************************************/ -/* 2.4.3 => 2.4.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) ) - -/**************************************/ -/* PCI DRIVER API */ - -#ifndef pci_set_dma_mask -#define pci_set_dma_mask _kc_pci_set_dma_mask -extern int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask); -#endif - -#ifndef pci_request_regions -#define pci_request_regions _kc_pci_request_regions -extern int _kc_pci_request_regions(struct pci_dev *pdev, char *res_name); -#endif - -#ifndef pci_release_regions -#define pci_release_regions _kc_pci_release_regions -extern void _kc_pci_release_regions(struct pci_dev *pdev); -#endif - -/**************************************/ -/* NETWORK DRIVER API */ - -#ifndef alloc_etherdev -#define alloc_etherdev _kc_alloc_etherdev -extern struct net_device * _kc_alloc_etherdev(int sizeof_priv); -#endif - -#ifndef is_valid_ether_addr -#define is_valid_ether_addr _kc_is_valid_ether_addr -extern int _kc_is_valid_ether_addr(u8 *addr); -#endif - -/**************************************/ -/* MISCELLANEOUS */ - -#ifndef INIT_TQUEUE -#define INIT_TQUEUE(_tq, _routine, _data) \ - do { \ - INIT_LIST_HEAD(&(_tq)->list); \ - (_tq)->sync = 0; \ - (_tq)->routine = _routine; \ - (_tq)->data = _data; \ - } while (0) -#endif - -#endif /* 2.4.3 => 2.4.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) ) -/* Generic MII registers. */ -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -/* Basic mode control register. */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -/* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -/* Advertisement control register. */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) -/* Expansion register for auto-negotiation. */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#endif - -/*****************************************************************************/ -/* 2.4.6 => 2.4.3 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) ) - -#ifndef pci_set_power_state -#define pci_set_power_state _kc_pci_set_power_state -extern int _kc_pci_set_power_state(struct pci_dev *dev, int state); -#endif - -#ifndef pci_enable_wake -#define pci_enable_wake _kc_pci_enable_wake -extern int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable); -#endif - -#ifndef pci_disable_device -#define pci_disable_device _kc_pci_disable_device -extern void _kc_pci_disable_device(struct pci_dev *pdev); -#endif - -/* PCI PM entry point syntax changed, so don't support suspend/resume */ -#undef CONFIG_PM - -#endif /* 2.4.6 => 2.4.3 */ - -#ifndef HAVE_PCI_SET_MWI -#define pci_set_mwi(X) pci_write_config_word(X, \ - PCI_COMMAND, adapter->hw.bus.pci_cmd_word | \ - PCI_COMMAND_INVALIDATE); -#define pci_clear_mwi(X) pci_write_config_word(X, \ - PCI_COMMAND, adapter->hw.bus.pci_cmd_word & \ - ~PCI_COMMAND_INVALIDATE); -#endif - -/*****************************************************************************/ -/* 2.4.10 => 2.4.9 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) ) - -/**************************************/ -/* MODULE API */ - -#ifndef MODULE_LICENSE - #define MODULE_LICENSE(X) -#endif - -/**************************************/ -/* OTHER */ - -#undef min -#define min(x,y) ({ \ - const typeof(x) _x = (x); \ - const typeof(y) _y = (y); \ - (void) (&_x == &_y); \ - _x < _y ? _x : _y; }) - -#undef max -#define max(x,y) ({ \ - const typeof(x) _x = (x); \ - const typeof(y) _y = (y); \ - (void) (&_x == &_y); \ - _x > _y ? _x : _y; }) - -#define min_t(type,x,y) ({ \ - type _x = (x); \ - type _y = (y); \ - _x < _y ? _x : _y; }) - -#define max_t(type,x,y) ({ \ - type _x = (x); \ - type _y = (y); \ - _x > _y ? _x : _y; }) - -#ifndef list_for_each_safe -#define list_for_each_safe(pos, n, head) \ - for (pos = (head)->next, n = pos->next; pos != (head); \ - pos = n, n = pos->next) -#endif - -#ifndef ____cacheline_aligned_in_smp -#ifdef CONFIG_SMP -#define ____cacheline_aligned_in_smp ____cacheline_aligned -#else -#define ____cacheline_aligned_in_smp -#endif /* CONFIG_SMP */ -#endif - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) ) -extern int _kc_snprintf(char * buf, size_t size, const char *fmt, ...); -#define snprintf(buf, size, fmt, args...) _kc_snprintf(buf, size, fmt, ##args) -extern int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args); -#define vsnprintf(buf, size, fmt, args) _kc_vsnprintf(buf, size, fmt, args) -#else /* 2.4.8 => 2.4.9 */ -extern int snprintf(char * buf, size_t size, const char *fmt, ...); -extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args); -#endif -#endif /* 2.4.10 -> 2.4.6 */ - - -/*****************************************************************************/ -/* 2.4.12 => 2.4.10 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,12) ) -#ifndef HAVE_NETIF_MSG -#define HAVE_NETIF_MSG 1 -enum { - NETIF_MSG_DRV = 0x0001, - NETIF_MSG_PROBE = 0x0002, - NETIF_MSG_LINK = 0x0004, - NETIF_MSG_TIMER = 0x0008, - NETIF_MSG_IFDOWN = 0x0010, - NETIF_MSG_IFUP = 0x0020, - NETIF_MSG_RX_ERR = 0x0040, - NETIF_MSG_TX_ERR = 0x0080, - NETIF_MSG_TX_QUEUED = 0x0100, - NETIF_MSG_INTR = 0x0200, - NETIF_MSG_TX_DONE = 0x0400, - NETIF_MSG_RX_STATUS = 0x0800, - NETIF_MSG_PKTDATA = 0x1000, - NETIF_MSG_HW = 0x2000, - NETIF_MSG_WOL = 0x4000, -}; - -#define netif_msg_drv(p) ((p)->msg_enable & NETIF_MSG_DRV) -#define netif_msg_probe(p) ((p)->msg_enable & NETIF_MSG_PROBE) -#define netif_msg_link(p) ((p)->msg_enable & NETIF_MSG_LINK) -#define netif_msg_timer(p) ((p)->msg_enable & NETIF_MSG_TIMER) -#define netif_msg_ifdown(p) ((p)->msg_enable & NETIF_MSG_IFDOWN) -#define netif_msg_ifup(p) ((p)->msg_enable & NETIF_MSG_IFUP) -#define netif_msg_rx_err(p) ((p)->msg_enable & NETIF_MSG_RX_ERR) -#define netif_msg_tx_err(p) ((p)->msg_enable & NETIF_MSG_TX_ERR) -#define netif_msg_tx_queued(p) ((p)->msg_enable & NETIF_MSG_TX_QUEUED) -#define netif_msg_intr(p) ((p)->msg_enable & NETIF_MSG_INTR) -#define netif_msg_tx_done(p) ((p)->msg_enable & NETIF_MSG_TX_DONE) -#define netif_msg_rx_status(p) ((p)->msg_enable & NETIF_MSG_RX_STATUS) -#define netif_msg_pktdata(p) ((p)->msg_enable & NETIF_MSG_PKTDATA) -#endif /* !HAVE_NETIF_MSG */ -#endif /* 2.4.12 => 2.4.10 */ - -/*****************************************************************************/ -/* 2.4.13 => 2.4.12 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) ) - -/**************************************/ -/* PCI DMA MAPPING */ - -#ifndef virt_to_page - #define virt_to_page(v) (mem_map + (virt_to_phys(v) >> PAGE_SHIFT)) -#endif - -#ifndef pci_map_page -#define pci_map_page _kc_pci_map_page -extern u64 _kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, size_t size, int direction); -#endif - -#ifndef pci_unmap_page -#define pci_unmap_page _kc_pci_unmap_page -extern void _kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size, int direction); -#endif - -/* pci_set_dma_mask takes dma_addr_t, which is only 32-bits prior to 2.4.13 */ - -#undef DMA_32BIT_MASK -#define DMA_32BIT_MASK 0xffffffff -#undef DMA_64BIT_MASK -#define DMA_64BIT_MASK 0xffffffff - -/**************************************/ -/* OTHER */ - -#ifndef cpu_relax -#define cpu_relax() rep_nop() -#endif - -struct vlan_ethhdr { - unsigned char h_dest[ETH_ALEN]; - unsigned char h_source[ETH_ALEN]; - unsigned short h_vlan_proto; - unsigned short h_vlan_TCI; - unsigned short h_vlan_encapsulated_proto; -}; -#endif /* 2.4.13 => 2.4.12 */ - -/*****************************************************************************/ -/* 2.4.17 => 2.4.12 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17) ) - -#ifndef __devexit_p - #define __devexit_p(x) &(x) -#endif - -#else - /* For Kernel 3.8 these are not defined - so undefine all */ - #undef __devexit_p - #undef __devexit - #undef __devinit - #undef __devinitdata - #define __devexit_p(x) &(x) - #define __devexit - #define __devinit - #define __devinitdata - -#endif /* 2.4.17 => 2.4.13 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,18) ) -#define NETIF_MSG_HW 0x2000 -#define NETIF_MSG_WOL 0x4000 - -#ifndef netif_msg_hw -#define netif_msg_hw(p) ((p)->msg_enable & NETIF_MSG_HW) -#endif -#ifndef netif_msg_wol -#define netif_msg_wol(p) ((p)->msg_enable & NETIF_MSG_WOL) -#endif -#endif /* 2.4.18 */ - -/*****************************************************************************/ - -/*****************************************************************************/ -/* 2.4.20 => 2.4.19 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20) ) - -/* we won't support NAPI on less than 2.4.20 */ -#ifdef NAPI -#undef NAPI -#endif - -#endif /* 2.4.20 => 2.4.19 */ - -/*****************************************************************************/ -/* 2.4.22 => 2.4.17 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) -#define pci_name(x) ((x)->slot_name) - -#ifndef SUPPORTED_10000baseT_Full -#define SUPPORTED_10000baseT_Full (1 << 12) -#endif -#ifndef ADVERTISED_10000baseT_Full -#define ADVERTISED_10000baseT_Full (1 << 12) -#endif -#endif - -/*****************************************************************************/ -/* 2.4.22 => 2.4.17 */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) -#ifndef IGB_NO_LRO -#define IGB_NO_LRO -#endif -#endif - -/*****************************************************************************/ -/*****************************************************************************/ -/* 2.4.23 => 2.4.22 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) ) -/*****************************************************************************/ -#ifdef NAPI -#ifndef netif_poll_disable -#define netif_poll_disable(x) _kc_netif_poll_disable(x) -static inline void _kc_netif_poll_disable(struct net_device *netdev) -{ - while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) { - /* No hurry */ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } -} -#endif -#ifndef netif_poll_enable -#define netif_poll_enable(x) _kc_netif_poll_enable(x) -static inline void _kc_netif_poll_enable(struct net_device *netdev) -{ - clear_bit(__LINK_STATE_RX_SCHED, &netdev->state); -} -#endif -#endif /* NAPI */ -#ifndef netif_tx_disable -#define netif_tx_disable(x) _kc_netif_tx_disable(x) -static inline void _kc_netif_tx_disable(struct net_device *dev) -{ - spin_lock_bh(&dev->xmit_lock); - netif_stop_queue(dev); - spin_unlock_bh(&dev->xmit_lock); -} -#endif -#else /* 2.4.23 => 2.4.22 */ -#define HAVE_SCTP -#endif /* 2.4.23 => 2.4.22 */ - -/*****************************************************************************/ -/* 2.6.4 => 2.6.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,25) || \ - ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ - LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) ) -#define ETHTOOL_OPS_COMPAT -#endif /* 2.6.4 => 2.6.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) -#define __user -#endif /* < 2.4.27 */ - -/*****************************************************************************/ -/* 2.5.71 => 2.4.x */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,71) ) -#define sk_protocol protocol -#define pci_get_device pci_find_device -#endif /* 2.5.70 => 2.4.x */ - -/*****************************************************************************/ -/* < 2.4.27 or 2.6.0 <= 2.6.5 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) || \ - ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ - LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) ) - -#ifndef netif_msg_init -#define netif_msg_init _kc_netif_msg_init -static inline u32 _kc_netif_msg_init(int debug_value, int default_msg_enable_bits) -{ - /* use default */ - if (debug_value < 0 || debug_value >= (sizeof(u32) * 8)) - return default_msg_enable_bits; - if (debug_value == 0) /* no output */ - return 0; - /* set low N bits */ - return (1 << debug_value) -1; -} -#endif - -#endif /* < 2.4.27 or 2.6.0 <= 2.6.5 */ -/*****************************************************************************/ -#if (( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) || \ - (( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) && \ - ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ))) -#define netdev_priv(x) x->priv -#endif - -/*****************************************************************************/ -/* <= 2.5.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ) -#include -#undef pci_register_driver -#define pci_register_driver pci_module_init - -/* - * Most of the dma compat code is copied/modified from the 2.4.37 - * /include/linux/libata-compat.h header file - */ -/* These definitions mirror those in pci.h, so they can be used - * interchangeably with their PCI_ counterparts */ -enum dma_data_direction { - DMA_BIDIRECTIONAL = 0, - DMA_TO_DEVICE = 1, - DMA_FROM_DEVICE = 2, - DMA_NONE = 3, -}; - -struct device { - struct pci_dev pdev; -}; - -static inline struct pci_dev *to_pci_dev (struct device *dev) -{ - return (struct pci_dev *) dev; -} -static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) -{ - return (struct device *) pdev; -} - -#define pdev_printk(lvl, pdev, fmt, args...) \ - printk("%s %s: " fmt, lvl, pci_name(pdev), ## args) -#define dev_err(dev, fmt, args...) \ - pdev_printk(KERN_ERR, to_pci_dev(dev), fmt, ## args) -#define dev_info(dev, fmt, args...) \ - pdev_printk(KERN_INFO, to_pci_dev(dev), fmt, ## args) -#define dev_warn(dev, fmt, args...) \ - pdev_printk(KERN_WARNING, to_pci_dev(dev), fmt, ## args) -#define dev_notice(dev, fmt, args...) \ - pdev_printk(KERN_NOTICE, to_pci_dev(dev), fmt, ## args) -#define dev_dbg(dev, fmt, args...) \ - pdev_printk(KERN_DEBUG, to_pci_dev(dev), fmt, ## args) - -/* NOTE: dangerous! we ignore the 'gfp' argument */ -#define dma_alloc_coherent(dev,sz,dma,gfp) \ - pci_alloc_consistent(to_pci_dev(dev),(sz),(dma)) -#define dma_free_coherent(dev,sz,addr,dma_addr) \ - pci_free_consistent(to_pci_dev(dev),(sz),(addr),(dma_addr)) - -#define dma_map_page(dev,a,b,c,d) \ - pci_map_page(to_pci_dev(dev),(a),(b),(c),(d)) -#define dma_unmap_page(dev,a,b,c) \ - pci_unmap_page(to_pci_dev(dev),(a),(b),(c)) - -#define dma_map_single(dev,a,b,c) \ - pci_map_single(to_pci_dev(dev),(a),(b),(c)) -#define dma_unmap_single(dev,a,b,c) \ - pci_unmap_single(to_pci_dev(dev),(a),(b),(c)) - -#define dma_map_sg(dev, sg, nents, dir) \ - pci_map_sg(to_pci_dev(dev), (sg), (nents), (dir) -#define dma_unmap_sg(dev, sg, nents, dir) \ - pci_unmap_sg(to_pci_dev(dev), (sg), (nents), (dir) - -#define dma_sync_single(dev,a,b,c) \ - pci_dma_sync_single(to_pci_dev(dev),(a),(b),(c)) - -/* for range just sync everything, that's all the pci API can do */ -#define dma_sync_single_range(dev,addr,off,sz,dir) \ - pci_dma_sync_single(to_pci_dev(dev),(addr),(off)+(sz),(dir)) - -#define dma_set_mask(dev,mask) \ - pci_set_dma_mask(to_pci_dev(dev),(mask)) - -/* hlist_* code - double linked lists */ -struct hlist_head { - struct hlist_node *first; -}; - -struct hlist_node { - struct hlist_node *next, **pprev; -}; - -static inline void __hlist_del(struct hlist_node *n) -{ - struct hlist_node *next = n->next; - struct hlist_node **pprev = n->pprev; - *pprev = next; - if (next) - next->pprev = pprev; -} - -static inline void hlist_del(struct hlist_node *n) -{ - __hlist_del(n); - n->next = NULL; - n->pprev = NULL; -} - -static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) -{ - struct hlist_node *first = h->first; - n->next = first; - if (first) - first->pprev = &n->next; - h->first = n; - n->pprev = &h->first; -} - -static inline int hlist_empty(const struct hlist_head *h) -{ - return !h->first; -} -#define HLIST_HEAD_INIT { .first = NULL } -#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } -#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) -static inline void INIT_HLIST_NODE(struct hlist_node *h) -{ - h->next = NULL; - h->pprev = NULL; -} - -#ifndef might_sleep -#define might_sleep() -#endif -#else -static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) -{ - return &pdev->dev; -} -#endif /* <= 2.5.0 */ - -/*****************************************************************************/ -/* 2.5.28 => 2.4.23 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) - -#include -#define work_struct tq_struct -#undef INIT_WORK -#define INIT_WORK(a,b) INIT_TQUEUE(a,(void (*)(void *))b,a) -#undef container_of -#define container_of list_entry -#define schedule_work schedule_task -#define flush_scheduled_work flush_scheduled_tasks -#define cancel_work_sync(x) flush_scheduled_work() - -#endif /* 2.5.28 => 2.4.17 */ - -/*****************************************************************************/ -/* 2.6.0 => 2.5.28 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) -#ifndef read_barrier_depends -#define read_barrier_depends() rmb() -#endif - -#undef get_cpu -#define get_cpu() smp_processor_id() -#undef put_cpu -#define put_cpu() do { } while(0) -#define MODULE_INFO(version, _version) -#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT -#define CONFIG_E1000_DISABLE_PACKET_SPLIT 1 -#endif -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT -#define CONFIG_IGB_DISABLE_PACKET_SPLIT 1 -#endif - -#define dma_set_coherent_mask(dev,mask) 1 - -#undef dev_put -#define dev_put(dev) __dev_put(dev) - -#ifndef skb_fill_page_desc -#define skb_fill_page_desc _kc_skb_fill_page_desc -extern void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page, int off, int size); -#endif - -#undef ALIGN -#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1)) - -#ifndef page_count -#define page_count(p) atomic_read(&(p)->count) -#endif - -#ifdef MAX_NUMNODES -#undef MAX_NUMNODES -#endif -#define MAX_NUMNODES 1 - -/* find_first_bit and find_next bit are not defined for most - * 2.4 kernels (except for the redhat 2.4.21 kernels - */ -#include -#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) -#undef find_next_bit -#define find_next_bit _kc_find_next_bit -extern unsigned long _kc_find_next_bit(const unsigned long *addr, - unsigned long size, - unsigned long offset); -#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) - - -#ifndef netdev_name -static inline const char *_kc_netdev_name(const struct net_device *dev) -{ - if (strchr(dev->name, '%')) - return "(unregistered net_device)"; - return dev->name; -} -#define netdev_name(netdev) _kc_netdev_name(netdev) -#endif /* netdev_name */ - -#ifndef strlcpy -#define strlcpy _kc_strlcpy -extern size_t _kc_strlcpy(char *dest, const char *src, size_t size); -#endif /* strlcpy */ - -#ifndef do_div -#if BITS_PER_LONG == 64 -# define do_div(n,base) ({ \ - uint32_t __base = (base); \ - uint32_t __rem; \ - __rem = ((uint64_t)(n)) % __base; \ - (n) = ((uint64_t)(n)) / __base; \ - __rem; \ - }) -#elif BITS_PER_LONG == 32 -extern uint32_t _kc__div64_32(uint64_t *dividend, uint32_t divisor); -# define do_div(n,base) ({ \ - uint32_t __base = (base); \ - uint32_t __rem; \ - if (likely(((n) >> 32) == 0)) { \ - __rem = (uint32_t)(n) % __base; \ - (n) = (uint32_t)(n) / __base; \ - } else \ - __rem = _kc__div64_32(&(n), __base); \ - __rem; \ - }) -#else /* BITS_PER_LONG == ?? */ -# error do_div() does not yet support the C64 -#endif /* BITS_PER_LONG */ -#endif /* do_div */ - -#ifndef NSEC_PER_SEC -#define NSEC_PER_SEC 1000000000L -#endif - -#undef HAVE_I2C_SUPPORT -#else /* 2.6.0 */ -#if IS_ENABLED(CONFIG_I2C_ALGOBIT) && \ - (RHEL_RELEASE_CODE && (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,9))) -#define HAVE_I2C_SUPPORT -#endif /* IS_ENABLED(CONFIG_I2C_ALGOBIT) */ - -#endif /* 2.6.0 => 2.5.28 */ -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ) -#define dma_pool pci_pool -#define dma_pool_destroy pci_pool_destroy -#define dma_pool_alloc pci_pool_alloc -#define dma_pool_free pci_pool_free - -#define dma_pool_create(name,dev,size,align,allocation) \ - pci_pool_create((name),to_pci_dev(dev),(size),(align),(allocation)) -#endif /* < 2.6.3 */ - -/*****************************************************************************/ -/* 2.6.4 => 2.6.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) -#define MODULE_VERSION(_version) MODULE_INFO(version, _version) -#endif /* 2.6.4 => 2.6.0 */ - -/*****************************************************************************/ -/* 2.6.5 => 2.6.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) -#define dma_sync_single_for_cpu dma_sync_single -#define dma_sync_single_for_device dma_sync_single -#define dma_sync_single_range_for_cpu dma_sync_single_range -#define dma_sync_single_range_for_device dma_sync_single_range -#ifndef pci_dma_mapping_error -#define pci_dma_mapping_error _kc_pci_dma_mapping_error -static inline int _kc_pci_dma_mapping_error(dma_addr_t dma_addr) -{ - return dma_addr == 0; -} -#endif -#endif /* 2.6.5 => 2.6.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) -extern int _kc_scnprintf(char * buf, size_t size, const char *fmt, ...); -#define scnprintf(buf, size, fmt, args...) _kc_scnprintf(buf, size, fmt, ##args) -#endif /* < 2.6.4 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6) ) -/* taken from 2.6 include/linux/bitmap.h */ -#undef bitmap_zero -#define bitmap_zero _kc_bitmap_zero -static inline void _kc_bitmap_zero(unsigned long *dst, int nbits) -{ - if (nbits <= BITS_PER_LONG) - *dst = 0UL; - else { - int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long); - memset(dst, 0, len); - } -} -#define random_ether_addr _kc_random_ether_addr -static inline void _kc_random_ether_addr(u8 *addr) -{ - get_random_bytes(addr, ETH_ALEN); - addr[0] &= 0xfe; /* clear multicast */ - addr[0] |= 0x02; /* set local assignment */ -} -#define page_to_nid(x) 0 - -#endif /* < 2.6.6 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7) ) -#undef if_mii -#define if_mii _kc_if_mii -static inline struct mii_ioctl_data *_kc_if_mii(struct ifreq *rq) -{ - return (struct mii_ioctl_data *) &rq->ifr_ifru; -} - -#ifndef __force -#define __force -#endif -#endif /* < 2.6.7 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) -#ifndef PCI_EXP_DEVCTL -#define PCI_EXP_DEVCTL 8 -#endif -#ifndef PCI_EXP_DEVCTL_CERE -#define PCI_EXP_DEVCTL_CERE 0x0001 -#endif -#define PCI_EXP_FLAGS 2 /* Capabilities register */ -#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ -#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ -#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ -#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ -#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ -#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ -#define PCI_EXP_DEVCAP 4 /* Device capabilities */ -#define PCI_EXP_DEVSTA 10 /* Device Status */ -#define msleep(x) do { set_current_state(TASK_UNINTERRUPTIBLE); \ - schedule_timeout((x * HZ)/1000 + 2); \ - } while (0) - -#endif /* < 2.6.8 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)) -#include -#define __iomem - -#ifndef kcalloc -#define kcalloc(n, size, flags) _kc_kzalloc(((n) * (size)), flags) -extern void *_kc_kzalloc(size_t size, int flags); -#endif -#define MSEC_PER_SEC 1000L -static inline unsigned int _kc_jiffies_to_msecs(const unsigned long j) -{ -#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) - return (MSEC_PER_SEC / HZ) * j; -#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) - return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC); -#else - return (j * MSEC_PER_SEC) / HZ; -#endif -} -static inline unsigned long _kc_msecs_to_jiffies(const unsigned int m) -{ - if (m > _kc_jiffies_to_msecs(MAX_JIFFY_OFFSET)) - return MAX_JIFFY_OFFSET; -#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) - return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ); -#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) - return m * (HZ / MSEC_PER_SEC); -#else - return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC; -#endif -} - -#define msleep_interruptible _kc_msleep_interruptible -static inline unsigned long _kc_msleep_interruptible(unsigned int msecs) -{ - unsigned long timeout = _kc_msecs_to_jiffies(msecs) + 1; - - while (timeout && !signal_pending(current)) { - __set_current_state(TASK_INTERRUPTIBLE); - timeout = schedule_timeout(timeout); - } - return _kc_jiffies_to_msecs(timeout); -} - -/* Basic mode control register. */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ - -#ifndef __le16 -#define __le16 u16 -#endif -#ifndef __le32 -#define __le32 u32 -#endif -#ifndef __le64 -#define __le64 u64 -#endif -#ifndef __be16 -#define __be16 u16 -#endif -#ifndef __be32 -#define __be32 u32 -#endif -#ifndef __be64 -#define __be64 u64 -#endif - -static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb) -{ - return (struct vlan_ethhdr *)skb->mac.raw; -} - -/* Wake-On-Lan options. */ -#define WAKE_PHY (1 << 0) -#define WAKE_UCAST (1 << 1) -#define WAKE_MCAST (1 << 2) -#define WAKE_BCAST (1 << 3) -#define WAKE_ARP (1 << 4) -#define WAKE_MAGIC (1 << 5) -#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ - -#define skb_header_pointer _kc_skb_header_pointer -static inline void *_kc_skb_header_pointer(const struct sk_buff *skb, - int offset, int len, void *buffer) -{ - int hlen = skb_headlen(skb); - - if (hlen - offset >= len) - return skb->data + offset; - -#ifdef MAX_SKB_FRAGS - if (skb_copy_bits(skb, offset, buffer, len) < 0) - return NULL; - - return buffer; -#else - return NULL; -#endif - -#ifndef NETDEV_TX_OK -#define NETDEV_TX_OK 0 -#endif -#ifndef NETDEV_TX_BUSY -#define NETDEV_TX_BUSY 1 -#endif -#ifndef NETDEV_TX_LOCKED -#define NETDEV_TX_LOCKED -1 -#endif -} - -#ifndef __bitwise -#define __bitwise -#endif -#endif /* < 2.6.9 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) -#ifdef module_param_array_named -#undef module_param_array_named -#define module_param_array_named(name, array, type, nump, perm) \ - static struct kparam_array __param_arr_##name \ - = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type, \ - sizeof(array[0]), array }; \ - module_param_call(name, param_array_set, param_array_get, \ - &__param_arr_##name, perm) -#endif /* module_param_array_named */ -/* - * num_online is broken for all < 2.6.10 kernels. This is needed to support - * Node module parameter of ixgbe. - */ -#undef num_online_nodes -#define num_online_nodes(n) 1 -extern DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES); -#undef node_online_map -#define node_online_map _kcompat_node_online_map -#define pci_get_class pci_find_class -#endif /* < 2.6.10 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) ) -#define PCI_D0 0 -#define PCI_D1 1 -#define PCI_D2 2 -#define PCI_D3hot 3 -#define PCI_D3cold 4 -typedef int pci_power_t; -#define pci_choose_state(pdev,state) state -#define PMSG_SUSPEND 3 -#define PCI_EXP_LNKCTL 16 - -#undef NETIF_F_LLTX - -#ifndef ARCH_HAS_PREFETCH -#define prefetch(X) -#endif - -#ifndef NET_IP_ALIGN -#define NET_IP_ALIGN 2 -#endif - -#define KC_USEC_PER_SEC 1000000L -#define usecs_to_jiffies _kc_usecs_to_jiffies -static inline unsigned int _kc_jiffies_to_usecs(const unsigned long j) -{ -#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) - return (KC_USEC_PER_SEC / HZ) * j; -#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) - return (j + (HZ / KC_USEC_PER_SEC) - 1)/(HZ / KC_USEC_PER_SEC); -#else - return (j * KC_USEC_PER_SEC) / HZ; -#endif -} -static inline unsigned long _kc_usecs_to_jiffies(const unsigned int m) -{ - if (m > _kc_jiffies_to_usecs(MAX_JIFFY_OFFSET)) - return MAX_JIFFY_OFFSET; -#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) - return (m + (KC_USEC_PER_SEC / HZ) - 1) / (KC_USEC_PER_SEC / HZ); -#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) - return m * (HZ / KC_USEC_PER_SEC); -#else - return (m * HZ + KC_USEC_PER_SEC - 1) / KC_USEC_PER_SEC; -#endif -} - -#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ -#define PCI_EXP_LNKSTA 18 /* Link Status */ -#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ -#define PCI_EXP_SLTCTL 24 /* Slot Control */ -#define PCI_EXP_SLTSTA 26 /* Slot Status */ -#define PCI_EXP_RTCTL 28 /* Root Control */ -#define PCI_EXP_RTCAP 30 /* Root Capabilities */ -#define PCI_EXP_RTSTA 32 /* Root Status */ -#endif /* < 2.6.11 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12) ) -#include -#define USE_REBOOT_NOTIFIER - -/* Generic MII registers. */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -/* Advertisement control register. */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ -#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymmetric pause */ -/* Link partner ability register. */ -#define LPA_PAUSE_CAP 0x0400 /* Can pause */ -#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ -/* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ -/* 1000BASE-T Status register */ -#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ -#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ - -#ifndef is_zero_ether_addr -#define is_zero_ether_addr _kc_is_zero_ether_addr -static inline int _kc_is_zero_ether_addr(const u8 *addr) -{ - return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]); -} -#endif /* is_zero_ether_addr */ -#ifndef is_multicast_ether_addr -#define is_multicast_ether_addr _kc_is_multicast_ether_addr -static inline int _kc_is_multicast_ether_addr(const u8 *addr) -{ - return addr[0] & 0x01; -} -#endif /* is_multicast_ether_addr */ -#endif /* < 2.6.12 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) ) -#ifndef kstrdup -#define kstrdup _kc_kstrdup -extern char *_kc_kstrdup(const char *s, unsigned int gfp); -#endif -#endif /* < 2.6.13 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ) -#define pm_message_t u32 -#ifndef kzalloc -#define kzalloc _kc_kzalloc -extern void *_kc_kzalloc(size_t size, int flags); -#endif - -/* Generic MII registers. */ -#define MII_ESTATUS 0x0f /* Extended Status */ -/* Basic mode status register. */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -/* Extended status register. */ -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ - -#define SUPPORTED_Pause (1 << 13) -#define SUPPORTED_Asym_Pause (1 << 14) -#define ADVERTISED_Pause (1 << 13) -#define ADVERTISED_Asym_Pause (1 << 14) - -#if (!(RHEL_RELEASE_CODE && \ - (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,3)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)))) -#if ((LINUX_VERSION_CODE == KERNEL_VERSION(2,6,9)) && !defined(gfp_t)) -#define gfp_t unsigned -#else -typedef unsigned gfp_t; -#endif -#endif /* !RHEL4.3->RHEL5.0 */ - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9) ) -#ifdef CONFIG_X86_64 -#define dma_sync_single_range_for_cpu(dev, addr, off, sz, dir) \ - dma_sync_single_for_cpu((dev), (addr), (off) + (sz), (dir)) -#define dma_sync_single_range_for_device(dev, addr, off, sz, dir) \ - dma_sync_single_for_device((dev), (addr), (off) + (sz), (dir)) -#endif -#endif -#endif /* < 2.6.14 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) ) -#ifndef vmalloc_node -#define vmalloc_node(a,b) vmalloc(a) -#endif /* vmalloc_node*/ - -#define setup_timer(_timer, _function, _data) \ -do { \ - (_timer)->function = _function; \ - (_timer)->data = _data; \ - init_timer(_timer); \ -} while (0) -#ifndef device_can_wakeup -#define device_can_wakeup(dev) (1) -#endif -#ifndef device_set_wakeup_enable -#define device_set_wakeup_enable(dev, val) do{}while(0) -#endif -#ifndef device_init_wakeup -#define device_init_wakeup(dev,val) do {} while (0) -#endif -static inline unsigned _kc_compare_ether_addr(const u8 *addr1, const u8 *addr2) -{ - const u16 *a = (const u16 *) addr1; - const u16 *b = (const u16 *) addr2; - - return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; -} -#undef compare_ether_addr -#define compare_ether_addr(addr1, addr2) _kc_compare_ether_addr(addr1, addr2) -#endif /* < 2.6.15 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) ) -#undef DEFINE_MUTEX -#define DEFINE_MUTEX(x) DECLARE_MUTEX(x) -#define mutex_lock(x) down_interruptible(x) -#define mutex_unlock(x) up(x) - -#ifndef ____cacheline_internodealigned_in_smp -#ifdef CONFIG_SMP -#define ____cacheline_internodealigned_in_smp ____cacheline_aligned_in_smp -#else -#define ____cacheline_internodealigned_in_smp -#endif /* CONFIG_SMP */ -#endif /* ____cacheline_internodealigned_in_smp */ -#undef HAVE_PCI_ERS -#else /* 2.6.16 and above */ -#undef HAVE_PCI_ERS -#define HAVE_PCI_ERS -#if ( SLE_VERSION_CODE && SLE_VERSION_CODE == SLE_VERSION(10,4,0) ) -#ifdef device_can_wakeup -#undef device_can_wakeup -#endif /* device_can_wakeup */ -#define device_can_wakeup(dev) 1 -#endif /* SLE_VERSION(10,4,0) */ -#endif /* < 2.6.16 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17) ) -#ifndef dev_notice -#define dev_notice(dev, fmt, args...) \ - dev_printk(KERN_NOTICE, dev, fmt, ## args) -#endif - -#ifndef first_online_node -#define first_online_node 0 -#endif -#ifndef NET_SKB_PAD -#define NET_SKB_PAD 16 -#endif -#endif /* < 2.6.17 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ) - -#ifndef IRQ_HANDLED -#define irqreturn_t void -#define IRQ_HANDLED -#define IRQ_NONE -#endif - -#ifndef IRQF_PROBE_SHARED -#ifdef SA_PROBEIRQ -#define IRQF_PROBE_SHARED SA_PROBEIRQ -#else -#define IRQF_PROBE_SHARED 0 -#endif -#endif - -#ifndef IRQF_SHARED -#define IRQF_SHARED SA_SHIRQ -#endif - -#ifndef ARRAY_SIZE -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#endif - -#ifndef FIELD_SIZEOF -#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) -#endif - -#ifndef skb_is_gso -#ifdef NETIF_F_TSO -#define skb_is_gso _kc_skb_is_gso -static inline int _kc_skb_is_gso(const struct sk_buff *skb) -{ - return skb_shinfo(skb)->gso_size; -} -#else -#define skb_is_gso(a) 0 -#endif -#endif - -#ifndef resource_size_t -#define resource_size_t unsigned long -#endif - -#ifdef skb_pad -#undef skb_pad -#endif -#define skb_pad(x,y) _kc_skb_pad(x, y) -int _kc_skb_pad(struct sk_buff *skb, int pad); -#ifdef skb_padto -#undef skb_padto -#endif -#define skb_padto(x,y) _kc_skb_padto(x, y) -static inline int _kc_skb_padto(struct sk_buff *skb, unsigned int len) -{ - unsigned int size = skb->len; - if(likely(size >= len)) - return 0; - return _kc_skb_pad(skb, len - size); -} - -#ifndef DECLARE_PCI_UNMAP_ADDR -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - u32 LEN_NAME -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) -#endif /* DECLARE_PCI_UNMAP_ADDR */ -#endif /* < 2.6.18 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ) - -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,0))) -#define i_private u.generic_ip -#endif /* >= RHEL 5.0 */ - -#ifndef DIV_ROUND_UP -#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) -#endif -#ifndef __ALIGN_MASK -#define __ALIGN_MASK(x, mask) (((x) + (mask)) & ~(mask)) -#endif -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ) -#if (!((RHEL_RELEASE_CODE && \ - ((RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,4) && \ - RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)) || \ - (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,0)))))) -typedef irqreturn_t (*irq_handler_t)(int, void*, struct pt_regs *); -#endif -#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) -#undef CONFIG_INET_LRO -#undef CONFIG_INET_LRO_MODULE -#ifdef IXGBE_FCOE -#undef CONFIG_FCOE -#undef CONFIG_FCOE_MODULE -#endif /* IXGBE_FCOE */ -#endif -typedef irqreturn_t (*new_handler_t)(int, void*); -static inline irqreturn_t _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) -#else /* 2.4.x */ -typedef void (*irq_handler_t)(int, void*, struct pt_regs *); -typedef void (*new_handler_t)(int, void*); -static inline int _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) -#endif /* >= 2.5.x */ -{ - irq_handler_t new_handler = (irq_handler_t) handler; - return request_irq(irq, new_handler, flags, devname, dev_id); -} - -#undef request_irq -#define request_irq(irq, handler, flags, devname, dev_id) _kc_request_irq((irq), (handler), (flags), (devname), (dev_id)) - -#define irq_handler_t new_handler_t -/* pci_restore_state and pci_save_state handles MSI/PCIE from 2.6.19 */ -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4))) -#define PCIE_CONFIG_SPACE_LEN 256 -#define PCI_CONFIG_SPACE_LEN 64 -#define PCIE_LINK_STATUS 0x12 -#define pci_config_space_ich8lan() do {} while(0) -#undef pci_save_state -extern int _kc_pci_save_state(struct pci_dev *); -#define pci_save_state(pdev) _kc_pci_save_state(pdev) -#undef pci_restore_state -extern void _kc_pci_restore_state(struct pci_dev *); -#define pci_restore_state(pdev) _kc_pci_restore_state(pdev) -#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */ - -#ifdef HAVE_PCI_ERS -#undef free_netdev -extern void _kc_free_netdev(struct net_device *); -#define free_netdev(netdev) _kc_free_netdev(netdev) -#endif -static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) -{ - return 0; -} -#define pci_disable_pcie_error_reporting(dev) do {} while (0) -#define pci_cleanup_aer_uncorrect_error_status(dev) do {} while (0) - -extern void *_kc_kmemdup(const void *src, size_t len, unsigned gfp); -#define kmemdup(src, len, gfp) _kc_kmemdup(src, len, gfp) -#ifndef bool -#define bool _Bool -#define true 1 -#define false 0 -#endif -#else /* 2.6.19 */ -#include -#include -#endif /* < 2.6.19 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ) -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28) ) -#undef INIT_WORK -#define INIT_WORK(_work, _func) \ -do { \ - INIT_LIST_HEAD(&(_work)->entry); \ - (_work)->pending = 0; \ - (_work)->func = (void (*)(void *))_func; \ - (_work)->data = _work; \ - init_timer(&(_work)->timer); \ -} while (0) -#endif - -#ifndef PCI_VDEVICE -#define PCI_VDEVICE(ven, dev) \ - PCI_VENDOR_ID_##ven, (dev), \ - PCI_ANY_ID, PCI_ANY_ID, 0, 0 -#endif - -#ifndef PCI_VENDOR_ID_INTEL -#define PCI_VENDOR_ID_INTEL 0x8086 -#endif - -#ifndef round_jiffies -#define round_jiffies(x) x -#endif - -#define csum_offset csum - -#define HAVE_EARLY_VMALLOC_NODE -#define dev_to_node(dev) -1 -#undef set_dev_node -/* remove compiler warning with b=b, for unused variable */ -#define set_dev_node(a, b) do { (b) = (b); } while(0) - -#if (!(RHEL_RELEASE_CODE && \ - (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,6)))) && \ - !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) -typedef __u16 __bitwise __sum16; -typedef __u32 __bitwise __wsum; -#endif - -#if (!(RHEL_RELEASE_CODE && \ - (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))) && \ - !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) -static inline __wsum csum_unfold(__sum16 n) -{ - return (__force __wsum)n; -} -#endif - -#else /* < 2.6.20 */ -#define HAVE_DEVICE_NUMA_NODE -#endif /* < 2.6.20 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) -#define to_net_dev(class) container_of(class, struct net_device, class_dev) -#define NETDEV_CLASS_DEV -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) -#define vlan_group_get_device(vg, id) (vg->vlan_devices[id]) -#define vlan_group_set_device(vg, id, dev) \ - do { \ - if (vg) vg->vlan_devices[id] = dev; \ - } while (0) -#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ -#define pci_channel_offline(pdev) (pdev->error_state && \ - pdev->error_state != pci_channel_io_normal) -#define pci_request_selected_regions(pdev, bars, name) \ - pci_request_regions(pdev, name) -#define pci_release_selected_regions(pdev, bars) pci_release_regions(pdev); - -#ifndef __aligned -#define __aligned(x) __attribute__((aligned(x))) -#endif - -extern struct pci_dev *_kc_netdev_to_pdev(struct net_device *netdev); -#define netdev_to_dev(netdev) \ - pci_dev_to_dev(_kc_netdev_to_pdev(netdev)) -#else -static inline struct device *netdev_to_dev(struct net_device *netdev) -{ - return &netdev->dev; -} - -#endif /* < 2.6.21 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) -#define tcp_hdr(skb) (skb->h.th) -#define tcp_hdrlen(skb) (skb->h.th->doff << 2) -#define skb_transport_offset(skb) (skb->h.raw - skb->data) -#define skb_transport_header(skb) (skb->h.raw) -#define ipv6_hdr(skb) (skb->nh.ipv6h) -#define ip_hdr(skb) (skb->nh.iph) -#define skb_network_offset(skb) (skb->nh.raw - skb->data) -#define skb_network_header(skb) (skb->nh.raw) -#define skb_tail_pointer(skb) skb->tail -#define skb_reset_tail_pointer(skb) \ - do { \ - skb->tail = skb->data; \ - } while (0) -#define skb_set_tail_pointer(skb, offset) \ - do { \ - skb->tail = skb->data + offset; \ - } while (0) -#define skb_copy_to_linear_data(skb, from, len) \ - memcpy(skb->data, from, len) -#define skb_copy_to_linear_data_offset(skb, offset, from, len) \ - memcpy(skb->data + offset, from, len) -#define skb_network_header_len(skb) (skb->h.raw - skb->nh.raw) -#define pci_register_driver pci_module_init -#define skb_mac_header(skb) skb->mac.raw - -#ifdef NETIF_F_MULTI_QUEUE -#ifndef alloc_etherdev_mq -#define alloc_etherdev_mq(_a, _b) alloc_etherdev(_a) -#endif -#endif /* NETIF_F_MULTI_QUEUE */ - -#ifndef ETH_FCS_LEN -#define ETH_FCS_LEN 4 -#endif -#define cancel_work_sync(x) flush_scheduled_work() -#ifndef udp_hdr -#define udp_hdr _udp_hdr -static inline struct udphdr *_udp_hdr(const struct sk_buff *skb) -{ - return (struct udphdr *)skb_transport_header(skb); -} -#endif - -#ifdef cpu_to_be16 -#undef cpu_to_be16 -#endif -#define cpu_to_be16(x) __constant_htons(x) - -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1))) -enum { - DUMP_PREFIX_NONE, - DUMP_PREFIX_ADDRESS, - DUMP_PREFIX_OFFSET -}; -#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1)) */ -#ifndef hex_asc -#define hex_asc(x) "0123456789abcdef"[x] -#endif -#include -extern void _kc_print_hex_dump(const char *level, const char *prefix_str, - int prefix_type, int rowsize, int groupsize, - const void *buf, size_t len, bool ascii); -#define print_hex_dump(lvl, s, t, r, g, b, l, a) \ - _kc_print_hex_dump(lvl, s, t, r, g, b, l, a) -#ifndef ADVERTISED_2500baseX_Full -#define ADVERTISED_2500baseX_Full (1 << 15) -#endif -#ifndef SUPPORTED_2500baseX_Full -#define SUPPORTED_2500baseX_Full (1 << 15) -#endif - -#ifdef HAVE_I2C_SUPPORT -#include -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) -struct i2c_board_info { - char driver_name[KOBJ_NAME_LEN]; - char type[I2C_NAME_SIZE]; - unsigned short flags; - unsigned short addr; - void *platform_data; -}; -#define I2C_BOARD_INFO(driver, dev_addr) .driver_name = (driver),\ - .addr = (dev_addr) -#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ -#define i2c_new_device(adap, info) _kc_i2c_new_device(adap, info) -extern struct i2c_client * -_kc_i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info); -#endif /* HAVE_I2C_SUPPORT */ - -#else /* 2.6.22 */ -#define ETH_TYPE_TRANS_SETS_DEV -#define HAVE_NETDEV_STATS_IN_NETDEV -#endif /* < 2.6.22 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22) ) -#undef SET_MODULE_OWNER -#define SET_MODULE_OWNER(dev) do { } while (0) -#endif /* > 2.6.22 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ) -#define netif_subqueue_stopped(_a, _b) 0 -#ifndef PTR_ALIGN -#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) -#endif - -#ifndef CONFIG_PM_SLEEP -#define CONFIG_PM_SLEEP CONFIG_PM -#endif - -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13) ) -#define HAVE_ETHTOOL_GET_PERM_ADDR -#endif /* 2.6.14 through 2.6.22 */ -#endif /* < 2.6.23 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) -#ifndef ETH_FLAG_LRO -#define ETH_FLAG_LRO NETIF_F_LRO -#endif - -/* if GRO is supported then the napi struct must already exist */ -#ifndef NETIF_F_GRO -/* NAPI API changes in 2.6.24 break everything */ -struct napi_struct { - /* used to look up the real NAPI polling routine */ - int (*poll)(struct napi_struct *, int); - struct net_device *dev; - int weight; -}; -#endif - -#ifdef NAPI -extern int __kc_adapter_clean(struct net_device *, int *); -extern struct net_device *napi_to_poll_dev(const struct napi_struct *napi); -#define netif_napi_add(_netdev, _napi, _poll, _weight) \ - do { \ - struct napi_struct *__napi = (_napi); \ - struct net_device *poll_dev = napi_to_poll_dev(__napi); \ - poll_dev->poll = &(__kc_adapter_clean); \ - poll_dev->priv = (_napi); \ - poll_dev->weight = (_weight); \ - set_bit(__LINK_STATE_RX_SCHED, &poll_dev->state); \ - set_bit(__LINK_STATE_START, &poll_dev->state);\ - dev_hold(poll_dev); \ - __napi->poll = &(_poll); \ - __napi->weight = (_weight); \ - __napi->dev = (_netdev); \ - } while (0) -#define netif_napi_del(_napi) \ - do { \ - struct net_device *poll_dev = napi_to_poll_dev(_napi); \ - WARN_ON(!test_bit(__LINK_STATE_RX_SCHED, &poll_dev->state)); \ - dev_put(poll_dev); \ - memset(poll_dev, 0, sizeof(struct net_device));\ - } while (0) -#define napi_schedule_prep(_napi) \ - (netif_running((_napi)->dev) && netif_rx_schedule_prep(napi_to_poll_dev(_napi))) -#define napi_schedule(_napi) \ - do { \ - if (napi_schedule_prep(_napi)) \ - __netif_rx_schedule(napi_to_poll_dev(_napi)); \ - } while (0) -#define napi_enable(_napi) netif_poll_enable(napi_to_poll_dev(_napi)) -#define napi_disable(_napi) netif_poll_disable(napi_to_poll_dev(_napi)) -#ifdef CONFIG_SMP -static inline void napi_synchronize(const struct napi_struct *n) -{ - struct net_device *dev = napi_to_poll_dev(n); - - while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) { - /* No hurry. */ - msleep(1); - } -} -#else -#define napi_synchronize(n) barrier() -#endif /* CONFIG_SMP */ -#define __napi_schedule(_napi) __netif_rx_schedule(napi_to_poll_dev(_napi)) -#ifndef NETIF_F_GRO -#define napi_complete(_napi) netif_rx_complete(napi_to_poll_dev(_napi)) -#else -#define napi_complete(_napi) \ - do { \ - napi_gro_flush(_napi); \ - netif_rx_complete(napi_to_poll_dev(_napi)); \ - } while (0) -#endif /* NETIF_F_GRO */ -#else /* NAPI */ -#define netif_napi_add(_netdev, _napi, _poll, _weight) \ - do { \ - struct napi_struct *__napi = _napi; \ - _netdev->poll = &(_poll); \ - _netdev->weight = (_weight); \ - __napi->poll = &(_poll); \ - __napi->weight = (_weight); \ - __napi->dev = (_netdev); \ - } while (0) -#define netif_napi_del(_a) do {} while (0) -#endif /* NAPI */ - -#undef dev_get_by_name -#define dev_get_by_name(_a, _b) dev_get_by_name(_b) -#define __netif_subqueue_stopped(_a, _b) netif_subqueue_stopped(_a, _b) -#ifndef DMA_BIT_MASK -#define DMA_BIT_MASK(n) (((n) == 64) ? DMA_64BIT_MASK : ((1ULL<<(n))-1)) -#endif - -#ifdef NETIF_F_TSO6 -#define skb_is_gso_v6 _kc_skb_is_gso_v6 -static inline int _kc_skb_is_gso_v6(const struct sk_buff *skb) -{ - return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6; -} -#endif /* NETIF_F_TSO6 */ - -#ifndef KERN_CONT -#define KERN_CONT "" -#endif -#ifndef pr_err -#define pr_err(fmt, arg...) \ - printk(KERN_ERR fmt, ##arg) -#endif -#else /* < 2.6.24 */ -#define HAVE_ETHTOOL_GET_SSET_COUNT -#define HAVE_NETDEV_NAPI_LIST -#endif /* < 2.6.24 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,24) ) -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) -#include -#else /* >= 3.2.0 */ -#include -#endif /* else >= 3.2.0 */ -#endif /* > 2.6.24 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) ) -#define PM_QOS_CPU_DMA_LATENCY 1 - -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18) ) -#include -#define PM_QOS_DEFAULT_VALUE INFINITE_LATENCY -#define pm_qos_add_requirement(pm_qos_class, name, value) \ - set_acceptable_latency(name, value) -#define pm_qos_remove_requirement(pm_qos_class, name) \ - remove_acceptable_latency(name) -#define pm_qos_update_requirement(pm_qos_class, name, value) \ - modify_acceptable_latency(name, value) -#else -#define PM_QOS_DEFAULT_VALUE -1 -#define pm_qos_add_requirement(pm_qos_class, name, value) -#define pm_qos_remove_requirement(pm_qos_class, name) -#define pm_qos_update_requirement(pm_qos_class, name, value) { \ - if (value != PM_QOS_DEFAULT_VALUE) { \ - printk(KERN_WARNING "%s: unable to set PM QoS requirement\n", \ - pci_name(adapter->pdev)); \ - } \ -} - -#endif /* > 2.6.18 */ - -#define pci_enable_device_mem(pdev) pci_enable_device(pdev) - -#ifndef DEFINE_PCI_DEVICE_TABLE -#define DEFINE_PCI_DEVICE_TABLE(_table) struct pci_device_id _table[] -#endif /* DEFINE_PCI_DEVICE_TABLE */ - - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) -#ifndef IGB_PROCFS -#define IGB_PROCFS -#endif /* IGB_PROCFS */ -#endif /* >= 2.6.0 */ - -#else /* < 2.6.25 */ - - -#if IS_ENABLED(CONFIG_HWMON) -#ifndef IGB_HWMON -#define IGB_HWMON -#endif /* IGB_HWMON */ -#endif /* CONFIG_HWMON */ - -#endif /* < 2.6.25 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ) -#ifndef clamp_t -#define clamp_t(type, val, min, max) ({ \ - type __val = (val); \ - type __min = (min); \ - type __max = (max); \ - __val = __val < __min ? __min : __val; \ - __val > __max ? __max : __val; }) -#endif /* clamp_t */ -#undef kzalloc_node -#define kzalloc_node(_size, _flags, _node) kzalloc(_size, _flags) - -extern void _kc_pci_disable_link_state(struct pci_dev *dev, int state); -#define pci_disable_link_state(p, s) _kc_pci_disable_link_state(p, s) -#else /* < 2.6.26 */ -#include -#define HAVE_NETDEV_VLAN_FEATURES -#ifndef PCI_EXP_LNKCAP_ASPMS -#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ -#endif /* PCI_EXP_LNKCAP_ASPMS */ -#endif /* < 2.6.26 */ -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) ) -static inline void _kc_ethtool_cmd_speed_set(struct ethtool_cmd *ep, - __u32 speed) -{ - ep->speed = (__u16)speed; - /* ep->speed_hi = (__u16)(speed >> 16); */ -} -#define ethtool_cmd_speed_set _kc_ethtool_cmd_speed_set - -static inline __u32 _kc_ethtool_cmd_speed(struct ethtool_cmd *ep) -{ - /* no speed_hi before 2.6.27, and probably no need for it yet */ - return (__u32)ep->speed; -} -#define ethtool_cmd_speed _kc_ethtool_cmd_speed - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) ) -#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) && defined(CONFIG_PM)) -#define ANCIENT_PM 1 -#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) && \ - (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) && \ - defined(CONFIG_PM_SLEEP)) -#define NEWER_PM 1 -#endif -#if defined(ANCIENT_PM) || defined(NEWER_PM) -#undef device_set_wakeup_enable -#define device_set_wakeup_enable(dev, val) \ - do { \ - u16 pmc = 0; \ - int pm = pci_find_capability(adapter->pdev, PCI_CAP_ID_PM); \ - if (pm) { \ - pci_read_config_word(adapter->pdev, pm + PCI_PM_PMC, \ - &pmc); \ - } \ - (dev)->power.can_wakeup = !!(pmc >> 11); \ - (dev)->power.should_wakeup = (val && (pmc >> 11)); \ - } while (0) -#endif /* 2.6.15-2.6.22 and CONFIG_PM or 2.6.23-2.6.25 and CONFIG_PM_SLEEP */ -#endif /* 2.6.15 through 2.6.27 */ -#ifndef netif_napi_del -#define netif_napi_del(_a) do {} while (0) -#ifdef NAPI -#ifdef CONFIG_NETPOLL -#undef netif_napi_del -#define netif_napi_del(_a) list_del(&(_a)->dev_list); -#endif -#endif -#endif /* netif_napi_del */ -#ifdef dma_mapping_error -#undef dma_mapping_error -#endif -#define dma_mapping_error(dev, dma_addr) pci_dma_mapping_error(dma_addr) - -#ifdef CONFIG_NETDEVICES_MULTIQUEUE -#define HAVE_TX_MQ -#endif - -#ifdef HAVE_TX_MQ -extern void _kc_netif_tx_stop_all_queues(struct net_device *); -extern void _kc_netif_tx_wake_all_queues(struct net_device *); -extern void _kc_netif_tx_start_all_queues(struct net_device *); -#define netif_tx_stop_all_queues(a) _kc_netif_tx_stop_all_queues(a) -#define netif_tx_wake_all_queues(a) _kc_netif_tx_wake_all_queues(a) -#define netif_tx_start_all_queues(a) _kc_netif_tx_start_all_queues(a) -#undef netif_stop_subqueue -#define netif_stop_subqueue(_ndev,_qi) do { \ - if (netif_is_multiqueue((_ndev))) \ - netif_stop_subqueue((_ndev), (_qi)); \ - else \ - netif_stop_queue((_ndev)); \ - } while (0) -#undef netif_start_subqueue -#define netif_start_subqueue(_ndev,_qi) do { \ - if (netif_is_multiqueue((_ndev))) \ - netif_start_subqueue((_ndev), (_qi)); \ - else \ - netif_start_queue((_ndev)); \ - } while (0) -#else /* HAVE_TX_MQ */ -#define netif_tx_stop_all_queues(a) netif_stop_queue(a) -#define netif_tx_wake_all_queues(a) netif_wake_queue(a) -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) ) -#define netif_tx_start_all_queues(a) netif_start_queue(a) -#else -#define netif_tx_start_all_queues(a) do {} while (0) -#endif -#define netif_stop_subqueue(_ndev,_qi) netif_stop_queue((_ndev)) -#define netif_start_subqueue(_ndev,_qi) netif_start_queue((_ndev)) -#endif /* HAVE_TX_MQ */ -#ifndef NETIF_F_MULTI_QUEUE -#define NETIF_F_MULTI_QUEUE 0 -#define netif_is_multiqueue(a) 0 -#define netif_wake_subqueue(a, b) -#endif /* NETIF_F_MULTI_QUEUE */ - -#ifndef __WARN_printf -extern void __kc_warn_slowpath(const char *file, const int line, - const char *fmt, ...) __attribute__((format(printf, 3, 4))); -#define __WARN_printf(arg...) __kc_warn_slowpath(__FILE__, __LINE__, arg) -#endif /* __WARN_printf */ - -#ifndef WARN -#define WARN(condition, format...) ({ \ - int __ret_warn_on = !!(condition); \ - if (unlikely(__ret_warn_on)) \ - __WARN_printf(format); \ - unlikely(__ret_warn_on); \ -}) -#endif /* WARN */ -#undef HAVE_IXGBE_DEBUG_FS -#undef HAVE_IGB_DEBUG_FS -#else /* < 2.6.27 */ -#define HAVE_TX_MQ -#define HAVE_NETDEV_SELECT_QUEUE -#ifdef CONFIG_DEBUG_FS -#define HAVE_IXGBE_DEBUG_FS -#define HAVE_IGB_DEBUG_FS -#endif /* CONFIG_DEBUG_FS */ -#endif /* < 2.6.27 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) -#define pci_ioremap_bar(pdev, bar) ioremap(pci_resource_start(pdev, bar), \ - pci_resource_len(pdev, bar)) -#define pci_wake_from_d3 _kc_pci_wake_from_d3 -#define pci_prepare_to_sleep _kc_pci_prepare_to_sleep -extern int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable); -extern int _kc_pci_prepare_to_sleep(struct pci_dev *dev); -#define netdev_alloc_page(a) alloc_page(GFP_ATOMIC) -#ifndef __skb_queue_head_init -static inline void __kc_skb_queue_head_init(struct sk_buff_head *list) -{ - list->prev = list->next = (struct sk_buff *)list; - list->qlen = 0; -} -#define __skb_queue_head_init(_q) __kc_skb_queue_head_init(_q) -#endif - -#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ -#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ - -#endif /* < 2.6.28 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) ) -#ifndef swap -#define swap(a, b) \ - do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) -#endif -#define pci_request_selected_regions_exclusive(pdev, bars, name) \ - pci_request_selected_regions(pdev, bars, name) -#ifndef CONFIG_NR_CPUS -#define CONFIG_NR_CPUS 1 -#endif /* CONFIG_NR_CPUS */ -#ifndef pcie_aspm_enabled -#define pcie_aspm_enabled() (1) -#endif /* pcie_aspm_enabled */ - -#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ - -#ifndef pci_clear_master -extern void _kc_pci_clear_master(struct pci_dev *dev); -#define pci_clear_master(dev) _kc_pci_clear_master(dev) -#endif - -#ifndef PCI_EXP_LNKCTL_ASPMC -#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ -#endif -#else /* < 2.6.29 */ -#ifndef HAVE_NET_DEVICE_OPS -#define HAVE_NET_DEVICE_OPS -#endif -#ifdef CONFIG_DCB -#define HAVE_PFC_MODE_ENABLE -#endif /* CONFIG_DCB */ -#endif /* < 2.6.29 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ) -#define skb_rx_queue_recorded(a) false -#define skb_get_rx_queue(a) 0 -#define skb_record_rx_queue(a, b) do {} while (0) -#define skb_tx_hash(n, s) ___kc_skb_tx_hash((n), (s), (n)->real_num_tx_queues) -#ifndef CONFIG_PCI_IOV -#undef pci_enable_sriov -#define pci_enable_sriov(a, b) -ENOTSUPP -#undef pci_disable_sriov -#define pci_disable_sriov(a) do {} while (0) -#endif /* CONFIG_PCI_IOV */ -#ifndef pr_cont -#define pr_cont(fmt, ...) \ - printk(KERN_CONT fmt, ##__VA_ARGS__) -#endif /* pr_cont */ -static inline void _kc_synchronize_irq(unsigned int a) -{ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) - synchronize_irq(); -#else /* < 2.5.28 */ - synchronize_irq(a); -#endif /* < 2.5.28 */ -} -#undef synchronize_irq -#define synchronize_irq(a) _kc_synchronize_irq(a) - -#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ - -#else /* < 2.6.30 */ -#define HAVE_ASPM_QUIRKS -#endif /* < 2.6.30 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ) -#define ETH_P_1588 0x88F7 -#define ETH_P_FIP 0x8914 -#ifndef netdev_uc_count -#define netdev_uc_count(dev) ((dev)->uc_count) -#endif -#ifndef netdev_for_each_uc_addr -#define netdev_for_each_uc_addr(uclist, dev) \ - for (uclist = dev->uc_list; uclist; uclist = uclist->next) -#endif -#ifndef PORT_OTHER -#define PORT_OTHER 0xff -#endif -#ifndef MDIO_PHY_ID_PRTAD -#define MDIO_PHY_ID_PRTAD 0x03e0 -#endif -#ifndef MDIO_PHY_ID_DEVAD -#define MDIO_PHY_ID_DEVAD 0x001f -#endif -#ifndef skb_dst -#define skb_dst(s) ((s)->dst) -#endif - -#ifndef SUPPORTED_1000baseKX_Full -#define SUPPORTED_1000baseKX_Full (1 << 17) -#endif -#ifndef SUPPORTED_10000baseKX4_Full -#define SUPPORTED_10000baseKX4_Full (1 << 18) -#endif -#ifndef SUPPORTED_10000baseKR_Full -#define SUPPORTED_10000baseKR_Full (1 << 19) -#endif - -#ifndef ADVERTISED_1000baseKX_Full -#define ADVERTISED_1000baseKX_Full (1 << 17) -#endif -#ifndef ADVERTISED_10000baseKX4_Full -#define ADVERTISED_10000baseKX4_Full (1 << 18) -#endif -#ifndef ADVERTISED_10000baseKR_Full -#define ADVERTISED_10000baseKR_Full (1 << 19) -#endif - -#else /* < 2.6.31 */ -#ifndef HAVE_NETDEV_STORAGE_ADDRESS -#define HAVE_NETDEV_STORAGE_ADDRESS -#endif -#ifndef HAVE_NETDEV_HW_ADDR -#define HAVE_NETDEV_HW_ADDR -#endif -#ifndef HAVE_TRANS_START_IN_QUEUE -#define HAVE_TRANS_START_IN_QUEUE -#endif -#ifndef HAVE_INCLUDE_LINUX_MDIO_H -#define HAVE_INCLUDE_LINUX_MDIO_H -#endif -#endif /* < 2.6.31 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) ) -#undef netdev_tx_t -#define netdev_tx_t int -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef NETIF_F_FCOE_MTU -#define NETIF_F_FCOE_MTU (1 << 26) -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) -static inline int _kc_pm_runtime_get_sync() -{ - return 1; -} -#define pm_runtime_get_sync(dev) _kc_pm_runtime_get_sync() -#else /* 2.6.0 => 2.6.32 */ -static inline int _kc_pm_runtime_get_sync(struct device *dev) -{ - return 1; -} -#ifndef pm_runtime_get_sync -#define pm_runtime_get_sync(dev) _kc_pm_runtime_get_sync(dev) -#endif -#endif /* 2.6.0 => 2.6.32 */ -#ifndef pm_runtime_put -#define pm_runtime_put(dev) do {} while (0) -#endif -#ifndef pm_runtime_put_sync -#define pm_runtime_put_sync(dev) do {} while (0) -#endif -#ifndef pm_runtime_resume -#define pm_runtime_resume(dev) do {} while (0) -#endif -#ifndef pm_schedule_suspend -#define pm_schedule_suspend(dev, t) do {} while (0) -#endif -#ifndef pm_runtime_set_suspended -#define pm_runtime_set_suspended(dev) do {} while (0) -#endif -#ifndef pm_runtime_disable -#define pm_runtime_disable(dev) do {} while (0) -#endif -#ifndef pm_runtime_put_noidle -#define pm_runtime_put_noidle(dev) do {} while (0) -#endif -#ifndef pm_runtime_set_active -#define pm_runtime_set_active(dev) do {} while (0) -#endif -#ifndef pm_runtime_enable -#define pm_runtime_enable(dev) do {} while (0) -#endif -#ifndef pm_runtime_get_noresume -#define pm_runtime_get_noresume(dev) do {} while (0) -#endif -#else /* < 2.6.32 */ -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE -#define HAVE_NETDEV_OPS_FCOE_ENABLE -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#ifdef CONFIG_DCB -#ifndef HAVE_DCBNL_OPS_GETAPP -#define HAVE_DCBNL_OPS_GETAPP -#endif -#endif /* CONFIG_DCB */ -#include -/* IOV bad DMA target work arounds require at least this kernel rev support */ -#define HAVE_PCIE_TYPE -#endif /* < 2.6.32 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) ) -#ifndef pci_pcie_cap -#define pci_pcie_cap(pdev) pci_find_capability(pdev, PCI_CAP_ID_EXP) -#endif -#ifndef IPV4_FLOW -#define IPV4_FLOW 0x10 -#endif /* IPV4_FLOW */ -#ifndef IPV6_FLOW -#define IPV6_FLOW 0x11 -#endif /* IPV6_FLOW */ -/* Features back-ported to RHEL6 or SLES11 SP1 after 2.6.32 */ -#if ( (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) || \ - (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,1,0)) ) -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN -#define HAVE_NETDEV_OPS_FCOE_GETWWN -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#endif /* RHEL6 or SLES11 SP1 */ -#ifndef __percpu -#define __percpu -#endif /* __percpu */ -#ifndef PORT_DA -#define PORT_DA PORT_OTHER -#endif -#ifndef PORT_NONE -#define PORT_NONE PORT_OTHER -#endif - -#if ((RHEL_RELEASE_CODE && \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,3)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0)))) -#if !defined(CONFIG_X86_32) && !defined(CONFIG_NEED_DMA_MAP_STATE) -#undef DEFINE_DMA_UNMAP_ADDR -#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME -#undef DEFINE_DMA_UNMAP_LEN -#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME -#undef dma_unmap_addr -#define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) -#undef dma_unmap_addr_set -#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) -#undef dma_unmap_len -#define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) -#undef dma_unmap_len_set -#define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) -#endif /* CONFIG_X86_64 && !CONFIG_NEED_DMA_MAP_STATE */ -#endif /* RHEL_RELEASE_CODE */ - -#if (!(RHEL_RELEASE_CODE && \ - (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,8)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0))) || \ - ((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,1)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0)))))) -static inline bool pci_is_pcie(struct pci_dev *dev) -{ - return !!pci_pcie_cap(dev); -} -#endif /* RHEL_RELEASE_CODE */ - -#ifndef __always_unused -#define __always_unused __attribute__((__unused__)) -#endif -#ifndef __maybe_unused -#define __maybe_unused __attribute__((__unused__)) -#endif - -#if (!(RHEL_RELEASE_CODE && \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)))) -#define sk_tx_queue_get(_sk) (-1) -#define sk_tx_queue_set(_sk, _tx_queue) do {} while(0) -#endif /* !(RHEL >= 6.2) */ - -#if (RHEL_RELEASE_CODE && \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,4)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) -#define HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT -#define HAVE_ETHTOOL_SET_PHYS_ID -#define HAVE_ETHTOOL_GET_TS_INFO -#endif /* RHEL >= 6.4 && RHEL < 7.0 */ - -#if (RHEL_RELEASE_CODE && \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,5)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) -#define HAVE_RHEL6_NETDEV_OPS_EXT_FDB -#endif /* RHEL >= 6.5 && RHEL < 7.0 */ - -#else /* < 2.6.33 */ -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN -#define HAVE_NETDEV_OPS_FCOE_GETWWN -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#endif /* < 2.6.33 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) ) -#if (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) -#ifndef pci_num_vf -#define pci_num_vf(pdev) _kc_pci_num_vf(pdev) -extern int _kc_pci_num_vf(struct pci_dev *dev); -#endif -#endif /* RHEL_RELEASE_CODE */ - -#ifndef ETH_FLAG_NTUPLE -#define ETH_FLAG_NTUPLE NETIF_F_NTUPLE -#endif - -#ifndef netdev_mc_count -#define netdev_mc_count(dev) ((dev)->mc_count) -#endif -#ifndef netdev_mc_empty -#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0) -#endif -#ifndef netdev_for_each_mc_addr -#define netdev_for_each_mc_addr(mclist, dev) \ - for (mclist = dev->mc_list; mclist; mclist = mclist->next) -#endif -#ifndef netdev_uc_count -#define netdev_uc_count(dev) ((dev)->uc.count) -#endif -#ifndef netdev_uc_empty -#define netdev_uc_empty(dev) (netdev_uc_count(dev) == 0) -#endif -#ifndef netdev_for_each_uc_addr -#define netdev_for_each_uc_addr(ha, dev) \ - list_for_each_entry(ha, &dev->uc.list, list) -#endif -#ifndef dma_set_coherent_mask -#define dma_set_coherent_mask(dev,mask) \ - pci_set_consistent_dma_mask(to_pci_dev(dev),(mask)) -#endif -#ifndef pci_dev_run_wake -#define pci_dev_run_wake(pdev) (0) -#endif - -/* netdev logging taken from include/linux/netdevice.h */ -#ifndef netdev_name -static inline const char *_kc_netdev_name(const struct net_device *dev) -{ - if (dev->reg_state != NETREG_REGISTERED) - return "(unregistered net_device)"; - return dev->name; -} -#define netdev_name(netdev) _kc_netdev_name(netdev) -#endif /* netdev_name */ - -#undef netdev_printk -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) -#define netdev_printk(level, netdev, format, args...) \ -do { \ - struct pci_dev *pdev = _kc_netdev_to_pdev(netdev); \ - printk(level "%s: " format, pci_name(pdev), ##args); \ -} while(0) -#elif ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) -#define netdev_printk(level, netdev, format, args...) \ -do { \ - struct pci_dev *pdev = _kc_netdev_to_pdev(netdev); \ - struct device *dev = pci_dev_to_dev(pdev); \ - dev_printk(level, dev, "%s: " format, \ - netdev_name(netdev), ##args); \ -} while(0) -#else /* 2.6.21 => 2.6.34 */ -#define netdev_printk(level, netdev, format, args...) \ - dev_printk(level, (netdev)->dev.parent, \ - "%s: " format, \ - netdev_name(netdev), ##args) -#endif /* <2.6.0 <2.6.21 <2.6.34 */ -#undef netdev_emerg -#define netdev_emerg(dev, format, args...) \ - netdev_printk(KERN_EMERG, dev, format, ##args) -#undef netdev_alert -#define netdev_alert(dev, format, args...) \ - netdev_printk(KERN_ALERT, dev, format, ##args) -#undef netdev_crit -#define netdev_crit(dev, format, args...) \ - netdev_printk(KERN_CRIT, dev, format, ##args) -#undef netdev_err -#define netdev_err(dev, format, args...) \ - netdev_printk(KERN_ERR, dev, format, ##args) -#undef netdev_warn -#define netdev_warn(dev, format, args...) \ - netdev_printk(KERN_WARNING, dev, format, ##args) -#undef netdev_notice -#define netdev_notice(dev, format, args...) \ - netdev_printk(KERN_NOTICE, dev, format, ##args) -#undef netdev_info -#define netdev_info(dev, format, args...) \ - netdev_printk(KERN_INFO, dev, format, ##args) -#undef netdev_dbg -#if defined(DEBUG) -#define netdev_dbg(__dev, format, args...) \ - netdev_printk(KERN_DEBUG, __dev, format, ##args) -#elif defined(CONFIG_DYNAMIC_DEBUG) -#define netdev_dbg(__dev, format, args...) \ -do { \ - dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \ - netdev_name(__dev), ##args); \ -} while (0) -#else /* DEBUG */ -#define netdev_dbg(__dev, format, args...) \ -({ \ - if (0) \ - netdev_printk(KERN_DEBUG, __dev, format, ##args); \ - 0; \ -}) -#endif /* DEBUG */ - -#undef netif_printk -#define netif_printk(priv, type, level, dev, fmt, args...) \ -do { \ - if (netif_msg_##type(priv)) \ - netdev_printk(level, (dev), fmt, ##args); \ -} while (0) - -#undef netif_emerg -#define netif_emerg(priv, type, dev, fmt, args...) \ - netif_level(emerg, priv, type, dev, fmt, ##args) -#undef netif_alert -#define netif_alert(priv, type, dev, fmt, args...) \ - netif_level(alert, priv, type, dev, fmt, ##args) -#undef netif_crit -#define netif_crit(priv, type, dev, fmt, args...) \ - netif_level(crit, priv, type, dev, fmt, ##args) -#undef netif_err -#define netif_err(priv, type, dev, fmt, args...) \ - netif_level(err, priv, type, dev, fmt, ##args) -#undef netif_warn -#define netif_warn(priv, type, dev, fmt, args...) \ - netif_level(warn, priv, type, dev, fmt, ##args) -#undef netif_notice -#define netif_notice(priv, type, dev, fmt, args...) \ - netif_level(notice, priv, type, dev, fmt, ##args) -#undef netif_info -#define netif_info(priv, type, dev, fmt, args...) \ - netif_level(info, priv, type, dev, fmt, ##args) -#undef netif_dbg -#define netif_dbg(priv, type, dev, fmt, args...) \ - netif_level(dbg, priv, type, dev, fmt, ##args) - -#ifdef SET_SYSTEM_SLEEP_PM_OPS -#define HAVE_SYSTEM_SLEEP_PM_OPS -#endif - -#ifndef for_each_set_bit -#define for_each_set_bit(bit, addr, size) \ - for ((bit) = find_first_bit((addr), (size)); \ - (bit) < (size); \ - (bit) = find_next_bit((addr), (size), (bit) + 1)) -#endif /* for_each_set_bit */ - -#ifndef DEFINE_DMA_UNMAP_ADDR -#define DEFINE_DMA_UNMAP_ADDR DECLARE_PCI_UNMAP_ADDR -#define DEFINE_DMA_UNMAP_LEN DECLARE_PCI_UNMAP_LEN -#define dma_unmap_addr pci_unmap_addr -#define dma_unmap_addr_set pci_unmap_addr_set -#define dma_unmap_len pci_unmap_len -#define dma_unmap_len_set pci_unmap_len_set -#endif /* DEFINE_DMA_UNMAP_ADDR */ - -#if (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,3)) -#ifdef IGB_HWMON -#ifdef CONFIG_DEBUG_LOCK_ALLOC -#define sysfs_attr_init(attr) \ - do { \ - static struct lock_class_key __key; \ - (attr)->key = &__key; \ - } while (0) -#else -#define sysfs_attr_init(attr) do {} while (0) -#endif /* CONFIG_DEBUG_LOCK_ALLOC */ -#endif /* IGB_HWMON */ -#endif /* RHEL_RELEASE_CODE */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) -static inline bool _kc_pm_runtime_suspended() -{ - return false; -} -#define pm_runtime_suspended(dev) _kc_pm_runtime_suspended() -#else /* 2.6.0 => 2.6.34 */ -static inline bool _kc_pm_runtime_suspended(struct device *dev) -{ - return false; -} -#ifndef pm_runtime_suspended -#define pm_runtime_suspended(dev) _kc_pm_runtime_suspended(dev) -#endif -#endif /* 2.6.0 => 2.6.34 */ - -#else /* < 2.6.34 */ -#define HAVE_SYSTEM_SLEEP_PM_OPS -#ifndef HAVE_SET_RX_MODE -#define HAVE_SET_RX_MODE -#endif - -#endif /* < 2.6.34 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ) - -ssize_t _kc_simple_write_to_buffer(void *to, size_t available, loff_t *ppos, - const void __user *from, size_t count); -#define simple_write_to_buffer _kc_simple_write_to_buffer - -#ifndef numa_node_id -#define numa_node_id() 0 -#endif -#ifdef HAVE_TX_MQ -#include -#ifndef CONFIG_NETDEVICES_MULTIQUEUE -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0))) -void _kc_netif_set_real_num_tx_queues(struct net_device *, unsigned int); -#define netif_set_real_num_tx_queues _kc_netif_set_real_num_tx_queues -#endif /* !(RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) */ -#else /* CONFIG_NETDEVICES_MULTI_QUEUE */ -#define netif_set_real_num_tx_queues(_netdev, _count) \ - do { \ - (_netdev)->egress_subqueue_count = _count; \ - } while (0) -#endif /* CONFIG_NETDEVICES_MULTI_QUEUE */ -#else /* HAVE_TX_MQ */ -#define netif_set_real_num_tx_queues(_netdev, _count) do {} while(0) -#endif /* HAVE_TX_MQ */ -#ifndef ETH_FLAG_RXHASH -#define ETH_FLAG_RXHASH (1<<28) -#endif /* ETH_FLAG_RXHASH */ -#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) -#define HAVE_IRQ_AFFINITY_HINT -#endif -#else /* < 2.6.35 */ -#define HAVE_PM_QOS_REQUEST_LIST -#define HAVE_IRQ_AFFINITY_HINT -#endif /* < 2.6.35 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ) -extern int _kc_ethtool_op_set_flags(struct net_device *, u32, u32); -#define ethtool_op_set_flags _kc_ethtool_op_set_flags -extern u32 _kc_ethtool_op_get_flags(struct net_device *); -#define ethtool_op_get_flags _kc_ethtool_op_get_flags - -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#ifdef NET_IP_ALIGN -#undef NET_IP_ALIGN -#endif -#define NET_IP_ALIGN 0 -#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ - -#ifdef NET_SKB_PAD -#undef NET_SKB_PAD -#endif - -#if (L1_CACHE_BYTES > 32) -#define NET_SKB_PAD L1_CACHE_BYTES -#else -#define NET_SKB_PAD 32 -#endif - -static inline struct sk_buff *_kc_netdev_alloc_skb_ip_align(struct net_device *dev, - unsigned int length) -{ - struct sk_buff *skb; - - skb = alloc_skb(length + NET_SKB_PAD + NET_IP_ALIGN, GFP_ATOMIC); - if (skb) { -#if (NET_IP_ALIGN + NET_SKB_PAD) - skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD); -#endif - skb->dev = dev; - } - return skb; -} - -#ifdef netdev_alloc_skb_ip_align -#undef netdev_alloc_skb_ip_align -#endif -#define netdev_alloc_skb_ip_align(n, l) _kc_netdev_alloc_skb_ip_align(n, l) - -#undef netif_level -#define netif_level(level, priv, type, dev, fmt, args...) \ -do { \ - if (netif_msg_##type(priv)) \ - netdev_##level(dev, fmt, ##args); \ -} while (0) - -#undef usleep_range -#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000)) - -#define u64_stats_update_begin(a) do { } while(0) -#define u64_stats_update_end(a) do { } while(0) -#define u64_stats_fetch_begin(a) do { } while(0) -#define u64_stats_fetch_retry_bh(a) (0) -#define u64_stats_fetch_begin_bh(a) (0) - -#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,1)) -#define HAVE_8021P_SUPPORT -#endif - -#else /* < 2.6.36 */ - - -#define HAVE_PM_QOS_REQUEST_ACTIVE -#define HAVE_8021P_SUPPORT -#define HAVE_NDO_GET_STATS64 -#endif /* < 2.6.36 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ) -#ifndef netif_set_real_num_rx_queues -static inline int __kc_netif_set_real_num_rx_queues(struct net_device *dev, - unsigned int rxq) -{ - return 0; -} -#define netif_set_real_num_rx_queues(dev, rxq) \ - __kc_netif_set_real_num_rx_queues((dev), (rxq)) -#endif -#ifndef ETHTOOL_RXNTUPLE_ACTION_CLEAR -#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) -#endif -#ifndef VLAN_N_VID -#define VLAN_N_VID VLAN_GROUP_ARRAY_LEN -#endif /* VLAN_N_VID */ -#ifndef ETH_FLAG_TXVLAN -#define ETH_FLAG_TXVLAN (1 << 7) -#endif /* ETH_FLAG_TXVLAN */ -#ifndef ETH_FLAG_RXVLAN -#define ETH_FLAG_RXVLAN (1 << 8) -#endif /* ETH_FLAG_RXVLAN */ - -static inline void _kc_skb_checksum_none_assert(struct sk_buff *skb) -{ - WARN_ON(skb->ip_summed != CHECKSUM_NONE); -} -#define skb_checksum_none_assert(skb) _kc_skb_checksum_none_assert(skb) - -static inline void *_kc_vzalloc_node(unsigned long size, int node) -{ - void *addr = vmalloc_node(size, node); - if (addr) - memset(addr, 0, size); - return addr; -} -#define vzalloc_node(_size, _node) _kc_vzalloc_node(_size, _node) - -static inline void *_kc_vzalloc(unsigned long size) -{ - void *addr = vmalloc(size); - if (addr) - memset(addr, 0, size); - return addr; -} -#define vzalloc(_size) _kc_vzalloc(_size) - -#ifndef vlan_get_protocol -static inline __be16 __kc_vlan_get_protocol(const struct sk_buff *skb) -{ - if (vlan_tx_tag_present(skb) || - skb->protocol != cpu_to_be16(ETH_P_8021Q)) - return skb->protocol; - - if (skb_headlen(skb) < sizeof(struct vlan_ethhdr)) - return 0; - - return ((struct vlan_ethhdr*)skb->data)->h_vlan_encapsulated_proto; -} -#define vlan_get_protocol(_skb) __kc_vlan_get_protocol(_skb) -#endif -#ifdef HAVE_HW_TIME_STAMP -#define SKBTX_HW_TSTAMP (1 << 0) -#define SKBTX_IN_PROGRESS (1 << 2) -#define SKB_SHARED_TX_IS_UNION -#endif - -#ifndef device_wakeup_enable -#define device_wakeup_enable(dev) device_set_wakeup_enable(dev, true) -#endif - -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,18) ) -#ifndef HAVE_VLAN_RX_REGISTER -#define HAVE_VLAN_RX_REGISTER -#endif -#endif /* > 2.4.18 */ -#endif /* < 2.6.37 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) ) -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) -#define skb_checksum_start_offset(skb) skb_transport_offset(skb) -#else /* 2.6.22 -> 2.6.37 */ -static inline int _kc_skb_checksum_start_offset(const struct sk_buff *skb) -{ - return skb->csum_start - skb_headroom(skb); -} -#define skb_checksum_start_offset(skb) _kc_skb_checksum_start_offset(skb) -#endif /* 2.6.22 -> 2.6.37 */ -#ifdef CONFIG_DCB -#ifndef IEEE_8021QAZ_MAX_TCS -#define IEEE_8021QAZ_MAX_TCS 8 -#endif -#ifndef DCB_CAP_DCBX_HOST -#define DCB_CAP_DCBX_HOST 0x01 -#endif -#ifndef DCB_CAP_DCBX_LLD_MANAGED -#define DCB_CAP_DCBX_LLD_MANAGED 0x02 -#endif -#ifndef DCB_CAP_DCBX_VER_CEE -#define DCB_CAP_DCBX_VER_CEE 0x04 -#endif -#ifndef DCB_CAP_DCBX_VER_IEEE -#define DCB_CAP_DCBX_VER_IEEE 0x08 -#endif -#ifndef DCB_CAP_DCBX_STATIC -#define DCB_CAP_DCBX_STATIC 0x10 -#endif -#endif /* CONFIG_DCB */ -#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)) -#define CONFIG_XPS -#endif /* RHEL_RELEASE_VERSION(6,2) */ -#endif /* < 2.6.38 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) ) -#ifndef NETIF_F_RXCSUM -#define NETIF_F_RXCSUM (1 << 29) -#endif -#ifndef skb_queue_reverse_walk_safe -#define skb_queue_reverse_walk_safe(queue, skb, tmp) \ - for (skb = (queue)->prev, tmp = skb->prev; \ - skb != (struct sk_buff *)(queue); \ - skb = tmp, tmp = skb->prev) -#endif -#else /* < 2.6.39 */ -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_DDP_TARGET -#define HAVE_NETDEV_OPS_FCOE_DDP_TARGET -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#ifndef HAVE_MQPRIO -#define HAVE_MQPRIO -#endif -#ifndef HAVE_SETUP_TC -#define HAVE_SETUP_TC -#endif -#ifdef CONFIG_DCB -#ifndef HAVE_DCBNL_IEEE -#define HAVE_DCBNL_IEEE -#endif -#endif /* CONFIG_DCB */ -#ifndef HAVE_NDO_SET_FEATURES -#define HAVE_NDO_SET_FEATURES -#endif -#endif /* < 2.6.39 */ - -/*****************************************************************************/ -/* use < 2.6.40 because of a Fedora 15 kernel update where they - * updated the kernel version to 2.6.40.x and they back-ported 3.0 features - * like set_phys_id for ethtool. - */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,40) ) -#ifdef ETHTOOL_GRXRINGS -#ifndef FLOW_EXT -#define FLOW_EXT 0x80000000 -union _kc_ethtool_flow_union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - __u8 hdata[60]; -}; -struct _kc_ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; -}; -struct _kc_ethtool_rx_flow_spec { - __u32 flow_type; - union _kc_ethtool_flow_union h_u; - struct _kc_ethtool_flow_ext h_ext; - union _kc_ethtool_flow_union m_u; - struct _kc_ethtool_flow_ext m_ext; - __u64 ring_cookie; - __u32 location; -}; -#define ethtool_rx_flow_spec _kc_ethtool_rx_flow_spec -#endif /* FLOW_EXT */ -#endif - -#define pci_disable_link_state_locked pci_disable_link_state - -#ifndef PCI_LTR_VALUE_MASK -#define PCI_LTR_VALUE_MASK 0x000003ff -#endif -#ifndef PCI_LTR_SCALE_MASK -#define PCI_LTR_SCALE_MASK 0x00001c00 -#endif -#ifndef PCI_LTR_SCALE_SHIFT -#define PCI_LTR_SCALE_SHIFT 10 -#endif - -#else /* < 2.6.40 */ -#define HAVE_ETHTOOL_SET_PHYS_ID -#endif /* < 2.6.40 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0) ) -#define USE_LEGACY_PM_SUPPORT -#endif /* < 3.0.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) -#ifndef __netdev_alloc_skb_ip_align -#define __netdev_alloc_skb_ip_align(d,l,_g) netdev_alloc_skb_ip_align(d,l) -#endif /* __netdev_alloc_skb_ip_align */ -#define dcb_ieee_setapp(dev, app) dcb_setapp(dev, app) -#define dcb_ieee_delapp(dev, app) 0 -#define dcb_ieee_getapp_mask(dev, app) (1 << app->priority) - -/* 1000BASE-T Control register */ -#define CTL1000_AS_MASTER 0x0800 -#define CTL1000_ENABLE_MASTER 0x1000 - -#else /* < 3.1.0 */ -#ifndef HAVE_DCBNL_IEEE_DELAPP -#define HAVE_DCBNL_IEEE_DELAPP -#endif -#endif /* < 3.1.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) -#ifdef ETHTOOL_GRXRINGS -#define HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS -#endif /* ETHTOOL_GRXRINGS */ - -#ifndef skb_frag_size -#define skb_frag_size(frag) _kc_skb_frag_size(frag) -static inline unsigned int _kc_skb_frag_size(const skb_frag_t *frag) -{ - return frag->size; -} -#endif /* skb_frag_size */ - -#ifndef skb_frag_size_sub -#define skb_frag_size_sub(frag, delta) _kc_skb_frag_size_sub(frag, delta) -static inline void _kc_skb_frag_size_sub(skb_frag_t *frag, int delta) -{ - frag->size -= delta; -} -#endif /* skb_frag_size_sub */ - -#ifndef skb_frag_page -#define skb_frag_page(frag) _kc_skb_frag_page(frag) -static inline struct page *_kc_skb_frag_page(const skb_frag_t *frag) -{ - return frag->page; -} -#endif /* skb_frag_page */ - -#ifndef skb_frag_address -#define skb_frag_address(frag) _kc_skb_frag_address(frag) -static inline void *_kc_skb_frag_address(const skb_frag_t *frag) -{ - return page_address(skb_frag_page(frag)) + frag->page_offset; -} -#endif /* skb_frag_address */ - -#ifndef skb_frag_dma_map -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) -#include -#endif -#define skb_frag_dma_map(dev,frag,offset,size,dir) \ - _kc_skb_frag_dma_map(dev,frag,offset,size,dir) -static inline dma_addr_t _kc_skb_frag_dma_map(struct device *dev, - const skb_frag_t *frag, - size_t offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_page(dev, skb_frag_page(frag), - frag->page_offset + offset, size, dir); -} -#endif /* skb_frag_dma_map */ - -#ifndef __skb_frag_unref -#define __skb_frag_unref(frag) __kc_skb_frag_unref(frag) -static inline void __kc_skb_frag_unref(skb_frag_t *frag) -{ - put_page(skb_frag_page(frag)); -} -#endif /* __skb_frag_unref */ - -#ifndef SPEED_UNKNOWN -#define SPEED_UNKNOWN -1 -#endif -#ifndef DUPLEX_UNKNOWN -#define DUPLEX_UNKNOWN 0xff -#endif -#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,3)) -#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED -#define HAVE_PCI_DEV_FLAGS_ASSIGNED -#endif -#endif -#else /* < 3.2.0 */ -#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED -#define HAVE_PCI_DEV_FLAGS_ASSIGNED -#define HAVE_VF_SPOOFCHK_CONFIGURE -#endif -#endif /* < 3.2.0 */ - -#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE == RHEL_RELEASE_VERSION(6,2)) -#undef ixgbe_get_netdev_tc_txq -#define ixgbe_get_netdev_tc_txq(dev, tc) (&netdev_extended(dev)->qos_data.tc_to_txq[tc]) -#endif -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0) ) -typedef u32 kni_netdev_features_t; -#undef PCI_EXP_TYPE_RC_EC -#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ -#ifndef CONFIG_BQL -#define netdev_tx_completed_queue(_q, _p, _b) do {} while (0) -#define netdev_completed_queue(_n, _p, _b) do {} while (0) -#define netdev_tx_sent_queue(_q, _b) do {} while (0) -#define netdev_sent_queue(_n, _b) do {} while (0) -#define netdev_tx_reset_queue(_q) do {} while (0) -#define netdev_reset_queue(_n) do {} while (0) -#endif -#else /* ! < 3.3.0 */ -typedef netdev_features_t kni_netdev_features_t; -#define HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef ETHTOOL_SRXNTUPLE -#undef ETHTOOL_SRXNTUPLE -#endif -#endif /* < 3.3.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) ) -#ifndef NETIF_F_RXFCS -#define NETIF_F_RXFCS 0 -#endif /* NETIF_F_RXFCS */ -#ifndef NETIF_F_RXALL -#define NETIF_F_RXALL 0 -#endif /* NETIF_F_RXALL */ - -#if !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) -#define NUMTCS_RETURNS_U8 - -int _kc_simple_open(struct inode *inode, struct file *file); -#define simple_open _kc_simple_open -#endif /* !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) */ - - -#ifndef skb_add_rx_frag -#define skb_add_rx_frag _kc_skb_add_rx_frag -extern void _kc_skb_add_rx_frag(struct sk_buff *, int, struct page *, - int, int, unsigned int); -#endif -#ifdef NET_ADDR_RANDOM -#define eth_hw_addr_random(N) do { \ - random_ether_addr(N->dev_addr); \ - N->addr_assign_type |= NET_ADDR_RANDOM; \ - } while (0) -#else /* NET_ADDR_RANDOM */ -#define eth_hw_addr_random(N) random_ether_addr(N->dev_addr) -#endif /* NET_ADDR_RANDOM */ -#else /* < 3.4.0 */ -#include -#endif /* >= 3.4.0 */ - -/*****************************************************************************/ -#if defined(E1000E_PTP) || defined(IGB_PTP) || defined(IXGBE_PTP) || defined(I40E_PTP) -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,0) ) && IS_ENABLED(CONFIG_PTP_1588_CLOCK) -#define HAVE_PTP_1588_CLOCK -#else -#error Cannot enable PTP Hardware Clock support due to a pre-3.0 kernel version or CONFIG_PTP_1588_CLOCK not enabled in the kernel -#endif /* > 3.0.0 && IS_ENABLED(CONFIG_PTP_1588_CLOCK) */ -#endif /* E1000E_PTP || IGB_PTP || IXGBE_PTP || I40E_PTP */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) ) -#define skb_tx_timestamp(skb) do {} while (0) -static inline bool __kc_ether_addr_equal(const u8 *addr1, const u8 *addr2) -{ - return !compare_ether_addr(addr1, addr2); -} -#define ether_addr_equal(_addr1, _addr2) __kc_ether_addr_equal((_addr1),(_addr2)) -#else -#define HAVE_FDB_OPS -#define HAVE_ETHTOOL_GET_TS_INFO -#endif /* < 3.5.0 */ - -/*****************************************************************************/ -#include -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0) ) -#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ - -#ifndef MDIO_EEE_100TX -#define MDIO_EEE_100TX 0x0002 /* 100TX EEE cap */ -#endif -#ifndef MDIO_EEE_1000T -#define MDIO_EEE_1000T 0x0004 /* 1000T EEE cap */ -#endif -#ifndef MDIO_EEE_10GT -#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ -#endif -#ifndef MDIO_EEE_1000KX -#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ -#endif -#ifndef MDIO_EEE_10GKX4 -#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ -#endif -#ifndef MDIO_EEE_10GKR -#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ -#endif -#endif /* < 3.6.0 */ - -/******************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,7,0) ) -#ifndef ADVERTISED_40000baseKR4_Full -/* these defines were all added in one commit, so should be safe - * to trigger activiation on one define - */ -#define SUPPORTED_40000baseKR4_Full (1 << 23) -#define SUPPORTED_40000baseCR4_Full (1 << 24) -#define SUPPORTED_40000baseSR4_Full (1 << 25) -#define SUPPORTED_40000baseLR4_Full (1 << 26) -#define ADVERTISED_40000baseKR4_Full (1 << 23) -#define ADVERTISED_40000baseCR4_Full (1 << 24) -#define ADVERTISED_40000baseSR4_Full (1 << 25) -#define ADVERTISED_40000baseLR4_Full (1 << 26) -#endif - -/** - * mmd_eee_cap_to_ethtool_sup_t - * @eee_cap: value of the MMD EEE Capability register - * - * A small helper function that translates MMD EEE Capability (3.20) bits - * to ethtool supported settings. - */ -static inline u32 __kc_mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap) -{ - u32 supported = 0; - - if (eee_cap & MDIO_EEE_100TX) - supported |= SUPPORTED_100baseT_Full; - if (eee_cap & MDIO_EEE_1000T) - supported |= SUPPORTED_1000baseT_Full; - if (eee_cap & MDIO_EEE_10GT) - supported |= SUPPORTED_10000baseT_Full; - if (eee_cap & MDIO_EEE_1000KX) - supported |= SUPPORTED_1000baseKX_Full; - if (eee_cap & MDIO_EEE_10GKX4) - supported |= SUPPORTED_10000baseKX4_Full; - if (eee_cap & MDIO_EEE_10GKR) - supported |= SUPPORTED_10000baseKR_Full; - - return supported; -} -#define mmd_eee_cap_to_ethtool_sup_t(eee_cap) \ - __kc_mmd_eee_cap_to_ethtool_sup_t(eee_cap) - -/** - * mmd_eee_adv_to_ethtool_adv_t - * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers - * - * A small helper function that translates the MMD EEE Advertisement (7.60) - * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement - * settings. - */ -static inline u32 __kc_mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv) -{ - u32 adv = 0; - - if (eee_adv & MDIO_EEE_100TX) - adv |= ADVERTISED_100baseT_Full; - if (eee_adv & MDIO_EEE_1000T) - adv |= ADVERTISED_1000baseT_Full; - if (eee_adv & MDIO_EEE_10GT) - adv |= ADVERTISED_10000baseT_Full; - if (eee_adv & MDIO_EEE_1000KX) - adv |= ADVERTISED_1000baseKX_Full; - if (eee_adv & MDIO_EEE_10GKX4) - adv |= ADVERTISED_10000baseKX4_Full; - if (eee_adv & MDIO_EEE_10GKR) - adv |= ADVERTISED_10000baseKR_Full; - - return adv; -} -#define mmd_eee_adv_to_ethtool_adv_t(eee_adv) \ - __kc_mmd_eee_adv_to_ethtool_adv_t(eee_adv) - -/** - * ethtool_adv_to_mmd_eee_adv_t - * @adv: the ethtool advertisement settings - * - * A small helper function that translates ethtool advertisement settings - * to EEE advertisements for the MMD EEE Advertisement (7.60) and - * MMD EEE Link Partner Ability (7.61) registers. - */ -static inline u16 __kc_ethtool_adv_to_mmd_eee_adv_t(u32 adv) -{ - u16 reg = 0; - - if (adv & ADVERTISED_100baseT_Full) - reg |= MDIO_EEE_100TX; - if (adv & ADVERTISED_1000baseT_Full) - reg |= MDIO_EEE_1000T; - if (adv & ADVERTISED_10000baseT_Full) - reg |= MDIO_EEE_10GT; - if (adv & ADVERTISED_1000baseKX_Full) - reg |= MDIO_EEE_1000KX; - if (adv & ADVERTISED_10000baseKX4_Full) - reg |= MDIO_EEE_10GKX4; - if (adv & ADVERTISED_10000baseKR_Full) - reg |= MDIO_EEE_10GKR; - - return reg; -} -#define ethtool_adv_to_mmd_eee_adv_t(adv) \ - __kc_ethtool_adv_to_mmd_eee_adv_t(adv) - -#ifndef pci_pcie_type -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) -static inline u8 pci_pcie_type(struct pci_dev *pdev) -{ - int pos; - u16 reg16; - - pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - if (!pos) - BUG(); - pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); - return (reg16 & PCI_EXP_FLAGS_TYPE) >> 4; -} -#else /* < 2.6.24 */ -#define pci_pcie_type(x) (x)->pcie_type -#endif /* < 2.6.24 */ -#endif /* pci_pcie_type */ - -#define ptp_clock_register(caps, args...) ptp_clock_register(caps) - -#ifndef PCI_EXP_LNKSTA2 -int __kc_pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val); -#define pcie_capability_read_word(d,p,v) __kc_pcie_capability_read_word(d,p,v) -int __kc_pcie_capability_write_word(struct pci_dev *dev, int pos, u16 val); -#define pcie_capability_write_word(d,p,v) __kc_pcie_capability_write_word(d,p,v) -int __kc_pcie_capability_clear_and_set_word(struct pci_dev *dev, int pos, - u16 clear, u16 set); -#define pcie_capability_clear_and_set_word(d,p,c,s) \ - __kc_pcie_capability_clear_and_set_word(d,p,c,s) - -#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ - -static inline int pcie_capability_clear_word(struct pci_dev *dev, int pos, - u16 clear) -{ - return __kc_pcie_capability_clear_and_set_word(dev, pos, clear, 0); -} -#endif /* !PCI_EXP_LNKSTA2 */ - -#if (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) -#define USE_CONST_DEV_UC_CHAR -#endif - -#else /* >= 3.7.0 */ -#define HAVE_CONST_STRUCT_PCI_ERROR_HANDLERS -#define USE_CONST_DEV_UC_CHAR -#endif /* >= 3.7.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0) ) -#ifndef PCI_EXP_LNKCTL_ASPM_L0S -#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ -#endif -#ifndef PCI_EXP_LNKCTL_ASPM_L1 -#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ -#endif -#define HAVE_CONFIG_HOTPLUG -/* Reserved Ethernet Addresses per IEEE 802.1Q */ -static const u8 eth_reserved_addr_base[ETH_ALEN] __aligned(2) = { - 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 }; -#if !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) &&\ - !(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,5)) -static inline bool is_link_local_ether_addr(const u8 *addr) -{ - __be16 *a = (__be16 *)addr; - static const __be16 *b = (const __be16 *)eth_reserved_addr_base; - static const __be16 m = cpu_to_be16(0xfff0); - - return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | ((a[2] ^ b[2]) & m)) == 0; -} -#endif /* !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) */ -#else /* >= 3.8.0 */ -#ifndef __devinit -#define __devinit -#define HAVE_ENCAP_CSUM_OFFLOAD -#endif - -#ifndef __devinitdata -#define __devinitdata -#endif - -#ifndef __devexit -#define __devexit -#endif - -#ifndef __devexit_p -#define __devexit_p -#endif - -#ifndef HAVE_SRIOV_CONFIGURE -#define HAVE_SRIOV_CONFIGURE -#endif - -#define HAVE_BRIDGE_ATTRIBS -#ifndef BRIDGE_MODE_VEB -#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ -#endif /* BRIDGE_MODE_VEB */ -#ifndef BRIDGE_MODE_VEPA -#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ -#endif /* BRIDGE_MODE_VEPA */ -#endif /* >= 3.8.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,9,0) ) - -#undef hlist_entry -#define hlist_entry(ptr, type, member) container_of(ptr,type,member) - -#undef hlist_entry_safe -#define hlist_entry_safe(ptr, type, member) \ - (ptr) ? hlist_entry(ptr, type, member) : NULL - -#undef hlist_for_each_entry -#define hlist_for_each_entry(pos, head, member) \ - for (pos = hlist_entry_safe((head)->first, typeof(*(pos)), member); \ - pos; \ - pos = hlist_entry_safe((pos)->member.next, typeof(*(pos)), member)) - -#undef hlist_for_each_entry_safe -#define hlist_for_each_entry_safe(pos, n, head, member) \ - for (pos = hlist_entry_safe((head)->first, typeof(*pos), member); \ - pos && ({ n = pos->member.next; 1; }); \ - pos = hlist_entry_safe(n, typeof(*pos), member)) - -#ifdef CONFIG_XPS -extern int __kc_netif_set_xps_queue(struct net_device *, struct cpumask *, u16); -#define netif_set_xps_queue(_dev, _mask, _idx) __kc_netif_set_xps_queue((_dev), (_mask), (_idx)) -#else /* CONFIG_XPS */ -#define netif_set_xps_queue(_dev, _mask, _idx) do {} while (0) -#endif /* CONFIG_XPS */ - -#ifdef HAVE_NETDEV_SELECT_QUEUE -#define _kc_hashrnd 0xd631614b /* not so random hash salt */ -extern u16 __kc_netdev_pick_tx(struct net_device *dev, struct sk_buff *skb); -#define __netdev_pick_tx __kc_netdev_pick_tx -#endif /* HAVE_NETDEV_SELECT_QUEUE */ -#else -#define HAVE_BRIDGE_FILTER -#define USE_DEFAULT_FDB_DEL_DUMP -#endif /* < 3.9.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) -#ifdef CONFIG_PCI_IOV -extern int __kc_pci_vfs_assigned(struct pci_dev *dev); -#else -static inline int __kc_pci_vfs_assigned(struct pci_dev *dev) -{ - return 0; -} -#endif -#define pci_vfs_assigned(dev) __kc_pci_vfs_assigned(dev) - -#ifndef VLAN_TX_COOKIE_MAGIC -static inline struct sk_buff *__kc__vlan_hwaccel_put_tag(struct sk_buff *skb, - u16 vlan_tci) -{ -#ifdef VLAN_TAG_PRESENT - vlan_tci |= VLAN_TAG_PRESENT; -#endif - skb->vlan_tci = vlan_tci; - return skb; -} -#define __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci) \ - __kc__vlan_hwaccel_put_tag(skb, vlan_tci) -#endif - -#else /* >= 3.10.0 */ -#define HAVE_ENCAP_TSO_OFFLOAD -#endif /* >= 3.10.0 */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,14,0) ) -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,6))) -#if (!(UBUNTU_KERNEL_CODE >= UBUNTU_KERNEL_VERSION(3,13,0,30,0) \ - && (UBUNTU_RELEASE_CODE == UBUNTU_RELEASE_VERSION(12,4) \ - || UBUNTU_RELEASE_CODE == UBUNTU_RELEASE_VERSION(14,4)))) -#if (!(SLE_VERSION_CODE == SLE_VERSION(12,0,0))) -#ifdef NETIF_F_RXHASH -#define PKT_HASH_TYPE_L3 0 -static inline void -skb_set_hash(struct sk_buff *skb, __u32 hash, __always_unused int type) -{ - skb->rxhash = hash; -} -#endif /* NETIF_F_RXHASH */ -#endif /* < SLES12 */ -#endif /* < 3.13.0-30.54 (Ubuntu 14.04) */ -#endif /* < RHEL7 */ -#endif /* < 3.14.0 */ - -#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(3,16,0) ) \ - || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) -#undef SET_ETHTOOL_OPS -#define SET_ETHTOOL_OPS(netdev, ops) ((netdev)->ethtool_ops = (ops)) -#define HAVE_VF_MIN_MAX_TXRATE 1 -#endif /* >= 3.16.0 */ - -#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(3,19,0) ) \ - || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) -#define HAVE_NDO_DFLT_BRIDGE_ADD_MASK -#if ( RHEL_RELEASE_CODE != RHEL_RELEASE_VERSION(7,2) ) -#define HAVE_NDO_FDB_ADD_VID -#endif /* !RHEL 7.2 */ -#endif /* >= 3.19.0 */ - -#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,0,0) ) \ - || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) -/* vlan_tx_xx functions got renamed to skb_vlan */ -#define vlan_tx_tag_get skb_vlan_tag_get -#define vlan_tx_tag_present skb_vlan_tag_present -#if ( RHEL_RELEASE_CODE != RHEL_RELEASE_VERSION(7,2) ) -#define HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS -#endif /* !RHEL 7.2 */ -#endif /* 4.0.0 */ - -#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,1,0) ) \ - || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,3) )) -/* ndo_bridge_getlink adds new nlflags parameter */ -#define HAVE_NDO_BRIDGE_GETLINK_NLFLAGS -#endif /* >= 4.1.0 */ - -#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,2,0) ) \ - || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,4) )) -/* ndo_bridge_getlink adds new filter_mask and vlan_fill parameters */ -#define HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL -#endif /* >= 4.2.0 */ - -/* - * vlan_tx_tag_* macros renamed to skb_vlan_tag_* (Linux commit: df8a39defad4) - * For older kernels backported this commit, need to use renamed functions. - * This fix is specific to RedHat/CentOS kernels. - */ -#if (defined(RHEL_RELEASE_CODE) && \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 8)) && \ - (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34))) -#define vlan_tx_tag_get skb_vlan_tag_get -#define vlan_tx_tag_present skb_vlan_tag_present -#endif - -#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(4, 9, 0)) || \ - (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(12, 3, 0)) || \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4))) -#define HAVE_VF_VLAN_PROTO -#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4)) -/* In RHEL/Centos 7.4, the "new" version of ndo_set_vf_vlan - * is in the struct net_device_ops_extended */ -#define ndo_set_vf_vlan extended.ndo_set_vf_vlan -#endif -#endif - -#if (defined(RHEL_RELEASE_CODE) && \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 5)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(8, 0)) && \ - (LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 0))) -#define ndo_change_mtu ndo_change_mtu_rh74 -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 8, 0) -#define HAVE_PCI_ENABLE_MSIX -#endif - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(5,0,0) ) -#define dev_open(x) dev_open(x, NULL) -#define HAVE_NDO_BRIDGE_SETLINK_EXTACK -#endif /* >= 5.0.0 */ - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(5,1,0) ) -#define HAVE_NDO_FDB_ADD_EXTACK -#endif /* >= 5.1.0 */ - -#if defined(timer_setup) && defined(from_timer) -#define HAVE_TIMER_SETUP -#endif - -#endif /* _KCOMPAT_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/meson.build b/kernel/linux/kni/ethtool/igb/meson.build deleted file mode 100644 index 2f796ac0b2..0000000000 --- a/kernel/linux/kni/ethtool/igb/meson.build +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2018 Luca Boccassi - -kni_igb_sources = files( - 'e1000_82575.c', - 'e1000_api.c', - 'e1000_i210.c', - 'e1000_mac.c', - 'e1000_manage.c', - 'e1000_mbx.c', - 'e1000_nvm.c', - 'e1000_phy.c', - 'igb_ethtool.c', - 'igb_main.c', - 'igb_param.c', - 'igb_vmdq.c') diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe.h deleted file mode 100644 index cc15ec6abd..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe.h +++ /dev/null @@ -1,912 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_H_ -#define _IXGBE_H_ - -#ifndef IXGBE_NO_LRO -#include -#endif - -#include -#include -#ifdef HAVE_IRQ_AFFINITY_HINT -#include -#endif /* HAVE_IRQ_AFFINITY_HINT */ -#include - -#ifdef SIOCETHTOOL -#include -#endif -#ifdef NETIF_F_HW_VLAN_TX -#include -#endif -#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) -#define IXGBE_DCA -#include -#endif -#include "ixgbe_dcb.h" - -#include "kcompat.h" - -#ifdef HAVE_SCTP -#include -#endif - -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#define IXGBE_FCOE -#include "ixgbe_fcoe.h" -#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */ - -#if defined(CONFIG_PTP_1588_CLOCK) || defined(CONFIG_PTP_1588_CLOCK_MODULE) -#define HAVE_IXGBE_PTP -#endif - -#include "ixgbe_api.h" - -#define PFX "ixgbe: " -#define DPRINTK(nlevel, klevel, fmt, args...) \ - ((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ - printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ - __func__ , ## args))) - -/* TX/RX descriptor defines */ -#define IXGBE_DEFAULT_TXD 512 -#define IXGBE_DEFAULT_TX_WORK 256 -#define IXGBE_MAX_TXD 4096 -#define IXGBE_MIN_TXD 64 - -#define IXGBE_DEFAULT_RXD 512 -#define IXGBE_DEFAULT_RX_WORK 256 -#define IXGBE_MAX_RXD 4096 -#define IXGBE_MIN_RXD 64 - - -/* flow control */ -#define IXGBE_MIN_FCRTL 0x40 -#define IXGBE_MAX_FCRTL 0x7FF80 -#define IXGBE_MIN_FCRTH 0x600 -#define IXGBE_MAX_FCRTH 0x7FFF0 -#define IXGBE_DEFAULT_FCPAUSE 0xFFFF -#define IXGBE_MIN_FCPAUSE 0 -#define IXGBE_MAX_FCPAUSE 0xFFFF - -/* Supported Rx Buffer Sizes */ -#define IXGBE_RXBUFFER_512 512 /* Used for packet split */ -#ifdef CONFIG_IXGBE_DISABLE_PACKET_SPLIT -#define IXGBE_RXBUFFER_1536 1536 -#define IXGBE_RXBUFFER_2K 2048 -#define IXGBE_RXBUFFER_3K 3072 -#define IXGBE_RXBUFFER_4K 4096 -#define IXGBE_RXBUFFER_7K 7168 -#define IXGBE_RXBUFFER_8K 8192 -#define IXGBE_RXBUFFER_15K 15360 -#endif /* CONFIG_IXGBE_DISABLE_PACKET_SPLIT */ -#define IXGBE_MAX_RXBUFFER 16384 /* largest size for single descriptor */ - -/* - * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN mans we - * reserve 2 more, and skb_shared_info adds an additional 384 bytes more, - * this adds up to 512 bytes of extra data meaning the smallest allocation - * we could have is 1K. - * i.e. RXBUFFER_512 --> size-1024 slab - */ -#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_512 - -#define MAXIMUM_ETHERNET_VLAN_SIZE (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) - -/* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */ - -#define IXGBE_TX_FLAGS_CSUM (u32)(1) -#define IXGBE_TX_FLAGS_HW_VLAN (u32)(1 << 1) -#define IXGBE_TX_FLAGS_SW_VLAN (u32)(1 << 2) -#define IXGBE_TX_FLAGS_TSO (u32)(1 << 3) -#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 4) -#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 5) -#define IXGBE_TX_FLAGS_FSO (u32)(1 << 6) -#define IXGBE_TX_FLAGS_TXSW (u32)(1 << 7) -#define IXGBE_TX_FLAGS_TSTAMP (u32)(1 << 8) -#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000 -#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000 -#define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT 29 -#define IXGBE_TX_FLAGS_VLAN_SHIFT 16 - -#define IXGBE_MAX_RX_DESC_POLL 10 - -#define IXGBE_MAX_VF_MC_ENTRIES 30 -#define IXGBE_MAX_VF_FUNCTIONS 64 -#define IXGBE_MAX_VFTA_ENTRIES 128 -#define MAX_EMULATION_MAC_ADDRS 16 -#define IXGBE_MAX_PF_MACVLANS 15 -#define IXGBE_82599_VF_DEVICE_ID 0x10ED -#define IXGBE_X540_VF_DEVICE_ID 0x1515 - -#ifdef CONFIG_PCI_IOV -#define VMDQ_P(p) ((p) + adapter->num_vfs) -#else -#define VMDQ_P(p) (p) -#endif - -#define UPDATE_VF_COUNTER_32bit(reg, last_counter, counter) \ - { \ - u32 current_counter = IXGBE_READ_REG(hw, reg); \ - if (current_counter < last_counter) \ - counter += 0x100000000LL; \ - last_counter = current_counter; \ - counter &= 0xFFFFFFFF00000000LL; \ - counter |= current_counter; \ - } - -#define UPDATE_VF_COUNTER_36bit(reg_lsb, reg_msb, last_counter, counter) \ - { \ - u64 current_counter_lsb = IXGBE_READ_REG(hw, reg_lsb); \ - u64 current_counter_msb = IXGBE_READ_REG(hw, reg_msb); \ - u64 current_counter = (current_counter_msb << 32) | \ - current_counter_lsb; \ - if (current_counter < last_counter) \ - counter += 0x1000000000LL; \ - last_counter = current_counter; \ - counter &= 0xFFFFFFF000000000LL; \ - counter |= current_counter; \ - } - -struct vf_stats { - u64 gprc; - u64 gorc; - u64 gptc; - u64 gotc; - u64 mprc; -}; - -struct vf_data_storage { - unsigned char vf_mac_addresses[ETH_ALEN]; - u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES]; - u16 num_vf_mc_hashes; - u16 default_vf_vlan_id; - u16 vlans_enabled; - bool clear_to_send; - struct vf_stats vfstats; - struct vf_stats last_vfstats; - struct vf_stats saved_rst_vfstats; - bool pf_set_mac; - u16 pf_vlan; /* When set, guest VLAN config not allowed. */ - u16 pf_qos; - u16 tx_rate; - u16 vlan_count; - u8 spoofchk_enabled; - struct pci_dev *vfdev; -}; - -struct vf_macvlans { - struct list_head l; - int vf; - bool free; - bool is_macvlan; - u8 vf_macvlan[ETH_ALEN]; -}; - -#ifndef IXGBE_NO_LRO -#define IXGBE_LRO_MAX 32 /*Maximum number of LRO descriptors*/ -#define IXGBE_LRO_GLOBAL 10 - -struct ixgbe_lro_stats { - u32 flushed; - u32 coal; -}; - -/* - * ixgbe_lro_header - header format to be aggregated by LRO - * @iph: IP header without options - * @tcp: TCP header - * @ts: Optional TCP timestamp data in TCP options - * - * This structure relies on the check above that verifies that the header - * is IPv4 and does not contain any options. - */ -struct ixgbe_lrohdr { - struct iphdr iph; - struct tcphdr th; - __be32 ts[0]; -}; - -struct ixgbe_lro_list { - struct sk_buff_head active; - struct ixgbe_lro_stats stats; -}; - -#endif /* IXGBE_NO_LRO */ -#define IXGBE_MAX_TXD_PWR 14 -#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR) - -/* Tx Descriptors needed, worst case */ -#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD) -#ifdef MAX_SKB_FRAGS -#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) -#else -#define DESC_NEEDED 4 -#endif - -/* wrapper around a pointer to a socket buffer, - * so a DMA handle can be stored along with the buffer */ -struct ixgbe_tx_buffer { - union ixgbe_adv_tx_desc *next_to_watch; - unsigned long time_stamp; - struct sk_buff *skb; - unsigned int bytecount; - unsigned short gso_segs; - __be16 protocol; - DEFINE_DMA_UNMAP_ADDR(dma); - DEFINE_DMA_UNMAP_LEN(len); - u32 tx_flags; -}; - -struct ixgbe_rx_buffer { - struct sk_buff *skb; - dma_addr_t dma; -#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT - struct page *page; - unsigned int page_offset; -#endif -}; - -struct ixgbe_queue_stats { - u64 packets; - u64 bytes; -}; - -struct ixgbe_tx_queue_stats { - u64 restart_queue; - u64 tx_busy; - u64 tx_done_old; -}; - -struct ixgbe_rx_queue_stats { - u64 rsc_count; - u64 rsc_flush; - u64 non_eop_descs; - u64 alloc_rx_page_failed; - u64 alloc_rx_buff_failed; - u64 csum_err; -}; - -enum ixgbe_ring_state_t { - __IXGBE_TX_FDIR_INIT_DONE, - __IXGBE_TX_DETECT_HANG, - __IXGBE_HANG_CHECK_ARMED, - __IXGBE_RX_RSC_ENABLED, -#ifndef HAVE_NDO_SET_FEATURES - __IXGBE_RX_CSUM_ENABLED, -#endif - __IXGBE_RX_CSUM_UDP_ZERO_ERR, -#ifdef IXGBE_FCOE - __IXGBE_RX_FCOE_BUFSZ, -#endif -}; - -#define check_for_tx_hang(ring) \ - test_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) -#define set_check_for_tx_hang(ring) \ - set_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) -#define clear_check_for_tx_hang(ring) \ - clear_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) -#ifndef IXGBE_NO_HW_RSC -#define ring_is_rsc_enabled(ring) \ - test_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) -#else -#define ring_is_rsc_enabled(ring) false -#endif -#define set_ring_rsc_enabled(ring) \ - set_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) -#define clear_ring_rsc_enabled(ring) \ - clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) -#define netdev_ring(ring) (ring->netdev) -#define ring_queue_index(ring) (ring->queue_index) - - -struct ixgbe_ring { - struct ixgbe_ring *next; /* pointer to next ring in q_vector */ - struct ixgbe_q_vector *q_vector; /* backpointer to host q_vector */ - struct net_device *netdev; /* netdev ring belongs to */ - struct device *dev; /* device for DMA mapping */ - void *desc; /* descriptor ring memory */ - union { - struct ixgbe_tx_buffer *tx_buffer_info; - struct ixgbe_rx_buffer *rx_buffer_info; - }; - unsigned long state; - u8 __iomem *tail; - dma_addr_t dma; /* phys. address of descriptor ring */ - unsigned int size; /* length in bytes */ - - u16 count; /* amount of descriptors */ - - u8 queue_index; /* needed for multiqueue queue management */ - u8 reg_idx; /* holds the special value that gets - * the hardware register offset - * associated with this ring, which is - * different for DCB and RSS modes - */ - u16 next_to_use; - u16 next_to_clean; - - union { -#ifdef CONFIG_IXGBE_DISABLE_PACKET_SPLIT - u16 rx_buf_len; -#else - u16 next_to_alloc; -#endif - struct { - u8 atr_sample_rate; - u8 atr_count; - }; - }; - - u8 dcb_tc; - struct ixgbe_queue_stats stats; - union { - struct ixgbe_tx_queue_stats tx_stats; - struct ixgbe_rx_queue_stats rx_stats; - }; -} ____cacheline_internodealigned_in_smp; - -enum ixgbe_ring_f_enum { - RING_F_NONE = 0, - RING_F_VMDQ, /* SR-IOV uses the same ring feature */ - RING_F_RSS, - RING_F_FDIR, -#ifdef IXGBE_FCOE - RING_F_FCOE, -#endif /* IXGBE_FCOE */ - RING_F_ARRAY_SIZE /* must be last in enum set */ -}; - -#define IXGBE_MAX_DCB_INDICES 8 -#define IXGBE_MAX_RSS_INDICES 16 -#define IXGBE_MAX_VMDQ_INDICES 64 -#define IXGBE_MAX_FDIR_INDICES 64 -#ifdef IXGBE_FCOE -#define IXGBE_MAX_FCOE_INDICES 8 -#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) -#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) -#else -#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES -#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES -#endif /* IXGBE_FCOE */ -struct ixgbe_ring_feature { - int indices; - int mask; -}; - -#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT -/* - * FCoE requires that all Rx buffers be over 2200 bytes in length. Since - * this is twice the size of a half page we need to double the page order - * for FCoE enabled Rx queues. - */ -#if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192) -static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring) -{ - return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0; -} -#else -#define ixgbe_rx_pg_order(_ring) 0 -#endif -#define ixgbe_rx_pg_size(_ring) (PAGE_SIZE << ixgbe_rx_pg_order(_ring)) -#define ixgbe_rx_bufsz(_ring) ((PAGE_SIZE / 2) << ixgbe_rx_pg_order(_ring)) - -#endif -struct ixgbe_ring_container { - struct ixgbe_ring *ring; /* pointer to linked list of rings */ - unsigned int total_bytes; /* total bytes processed this int */ - unsigned int total_packets; /* total packets processed this int */ - u16 work_limit; /* total work allowed per interrupt */ - u8 count; /* total number of rings in vector */ - u8 itr; /* current ITR setting for ring */ -}; - -/* iterator for handling rings in ring container */ -#define ixgbe_for_each_ring(pos, head) \ - for (pos = (head).ring; pos != NULL; pos = pos->next) - -#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \ - ? 8 : 1) -#define MAX_TX_PACKET_BUFFERS MAX_RX_PACKET_BUFFERS - -/* MAX_MSIX_Q_VECTORS of these are allocated, - * but we only use one per queue-specific vector. - */ -struct ixgbe_q_vector { - struct ixgbe_adapter *adapter; - int cpu; /* CPU for DCA */ - u16 v_idx; /* index of q_vector within array, also used for - * finding the bit in EICR and friends that - * represents the vector for this ring */ - u16 itr; /* Interrupt throttle rate written to EITR */ - struct ixgbe_ring_container rx, tx; - -#ifdef CONFIG_IXGBE_NAPI - struct napi_struct napi; -#endif -#ifndef HAVE_NETDEV_NAPI_LIST - struct net_device poll_dev; -#endif -#ifdef HAVE_IRQ_AFFINITY_HINT - cpumask_t affinity_mask; -#endif -#ifndef IXGBE_NO_LRO - struct ixgbe_lro_list lrolist; /* LRO list for queue vector*/ -#endif - int numa_node; - char name[IFNAMSIZ + 9]; - - /* for dynamic allocation of rings associated with this q_vector */ - struct ixgbe_ring ring[0] ____cacheline_internodealigned_in_smp; -}; - -/* - * microsecond values for various ITR rates shifted by 2 to fit itr register - * with the first 3 bits reserved 0 - */ -#define IXGBE_MIN_RSC_ITR 24 -#define IXGBE_100K_ITR 40 -#define IXGBE_20K_ITR 200 -#define IXGBE_16K_ITR 248 -#define IXGBE_10K_ITR 400 -#define IXGBE_8K_ITR 500 - -/* ixgbe_test_staterr - tests bits in Rx descriptor status and error fields */ -static inline __le32 ixgbe_test_staterr(union ixgbe_adv_rx_desc *rx_desc, - const u32 stat_err_bits) -{ - return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits); -} - -/* ixgbe_desc_unused - calculate if we have unused descriptors */ -static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring) -{ - u16 ntc = ring->next_to_clean; - u16 ntu = ring->next_to_use; - - return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1; -} - -#define IXGBE_RX_DESC(R, i) \ - (&(((union ixgbe_adv_rx_desc *)((R)->desc))[i])) -#define IXGBE_TX_DESC(R, i) \ - (&(((union ixgbe_adv_tx_desc *)((R)->desc))[i])) -#define IXGBE_TX_CTXTDESC(R, i) \ - (&(((struct ixgbe_adv_tx_context_desc *)((R)->desc))[i])) - -#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128 -#ifdef IXGBE_FCOE -/* use 3K as the baby jumbo frame size for FCoE */ -#define IXGBE_FCOE_JUMBO_FRAME_SIZE 3072 -#endif /* IXGBE_FCOE */ - -#define TCP_TIMER_VECTOR 0 -#define OTHER_VECTOR 1 -#define NON_Q_VECTORS (OTHER_VECTOR + TCP_TIMER_VECTOR) - -#define IXGBE_MAX_MSIX_Q_VECTORS_82599 64 -#define IXGBE_MAX_MSIX_Q_VECTORS_82598 16 - -struct ixgbe_mac_addr { - u8 addr[ETH_ALEN]; - u16 queue; - u16 state; /* bitmask */ -}; -#define IXGBE_MAC_STATE_DEFAULT 0x1 -#define IXGBE_MAC_STATE_MODIFIED 0x2 -#define IXGBE_MAC_STATE_IN_USE 0x4 - -#ifdef IXGBE_PROCFS -struct ixgbe_therm_proc_data { - struct ixgbe_hw *hw; - struct ixgbe_thermal_diode_data *sensor_data; -}; - -#endif /* IXGBE_PROCFS */ - -/* - * Only for array allocations in our adapter struct. On 82598, there will be - * unused entries in the array, but that's not a big deal. Also, in 82599, - * we can actually assign 64 queue vectors based on our extended-extended - * interrupt registers. This is different than 82598, which is limited to 16. - */ -#define MAX_MSIX_Q_VECTORS IXGBE_MAX_MSIX_Q_VECTORS_82599 -#define MAX_MSIX_COUNT IXGBE_MAX_MSIX_VECTORS_82599 - -#define MIN_MSIX_Q_VECTORS 1 -#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS) - -/* default to trying for four seconds */ -#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) - -/* board specific private data structure */ -struct ixgbe_adapter { -#ifdef NETIF_F_HW_VLAN_TX -#ifdef HAVE_VLAN_RX_REGISTER - struct vlan_group *vlgrp; /* must be first, see ixgbe_receive_skb */ -#else - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; -#endif -#endif /* NETIF_F_HW_VLAN_TX */ - /* OS defined structs */ - struct net_device *netdev; - struct pci_dev *pdev; - - unsigned long state; - - /* Some features need tri-state capability, - * thus the additional *_CAPABLE flags. - */ - u32 flags; -#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 0) -#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 1) -#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 2) -#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 3) -#ifndef IXGBE_NO_LLI -#define IXGBE_FLAG_LLI_PUSH (u32)(1 << 4) -#endif -#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 8) -#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) -#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 9) -#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 10) -#define IXGBE_FLAG_DCA_ENABLED_DATA (u32)(1 << 11) -#else -#define IXGBE_FLAG_DCA_ENABLED (u32)0 -#define IXGBE_FLAG_DCA_CAPABLE (u32)0 -#define IXGBE_FLAG_DCA_ENABLED_DATA (u32)0 -#endif -#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 12) -#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 13) -#define IXGBE_FLAG_DCB_CAPABLE (u32)(1 << 14) -#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 15) -#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 16) -#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 18) -#define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 19) -#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 20) -#define IXGBE_FLAG_NEED_LINK_CONFIG (u32)(1 << 21) -#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 22) -#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 23) -#ifdef IXGBE_FCOE -#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 24) -#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 25) -#endif /* IXGBE_FCOE */ -#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 26) -#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 27) -#define IXGBE_FLAG_SRIOV_REPLICATION_ENABLE (u32)(1 << 28) -#define IXGBE_FLAG_SRIOV_L2SWITCH_ENABLE (u32)(1 << 29) -#define IXGBE_FLAG_SRIOV_L2LOOPBACK_ENABLE (u32)(1 << 30) -#define IXGBE_FLAG_RX_BB_CAPABLE (u32)(1 << 31) - - u32 flags2; -#ifndef IXGBE_NO_HW_RSC -#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1) -#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1) -#else -#define IXGBE_FLAG2_RSC_CAPABLE 0 -#define IXGBE_FLAG2_RSC_ENABLED 0 -#endif -#define IXGBE_FLAG2_VMDQ_DEFAULT_OVERRIDE (u32)(1 << 2) -#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 4) -#define IXGBE_FLAG2_TEMP_SENSOR_EVENT (u32)(1 << 5) -#define IXGBE_FLAG2_SEARCH_FOR_SFP (u32)(1 << 6) -#define IXGBE_FLAG2_SFP_NEEDS_RESET (u32)(1 << 7) -#define IXGBE_FLAG2_RESET_REQUESTED (u32)(1 << 8) -#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 9) -#define IXGBE_FLAG2_RSS_FIELD_IPV4_UDP (u32)(1 << 10) -#define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP (u32)(1 << 11) -#define IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED (u32)(1 << 12) - - /* Tx fast path data */ - int num_tx_queues; - u16 tx_itr_setting; - u16 tx_work_limit; - - /* Rx fast path data */ - int num_rx_queues; - u16 rx_itr_setting; - u16 rx_work_limit; - - /* TX */ - struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp; - - u64 restart_queue; - u64 lsc_int; - u32 tx_timeout_count; - - /* RX */ - struct ixgbe_ring *rx_ring[MAX_RX_QUEUES]; - int num_rx_pools; /* == num_rx_queues in 82598 */ - int num_rx_queues_per_pool; /* 1 if 82598, can be many if 82599 */ - u64 hw_csum_rx_error; - u64 hw_rx_no_dma_resources; - u64 rsc_total_count; - u64 rsc_total_flush; - u64 non_eop_descs; -#ifndef CONFIG_IXGBE_NAPI - u64 rx_dropped_backlog; /* count drops from rx intr handler */ -#endif - u32 alloc_rx_page_failed; - u32 alloc_rx_buff_failed; - - struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS]; - -#ifdef HAVE_DCBNL_IEEE - struct ieee_pfc *ixgbe_ieee_pfc; - struct ieee_ets *ixgbe_ieee_ets; -#endif - struct ixgbe_dcb_config dcb_cfg; - struct ixgbe_dcb_config temp_dcb_cfg; - u8 dcb_set_bitmap; - u8 dcbx_cap; -#ifndef HAVE_MQPRIO - u8 tc; -#endif - enum ixgbe_fc_mode last_lfc_mode; - - int num_msix_vectors; - int max_msix_q_vectors; /* true count of q_vectors for device */ - struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE]; - struct msix_entry *msix_entries; - -#ifndef HAVE_NETDEV_STATS_IN_NETDEV - struct net_device_stats net_stats; -#endif -#ifndef IXGBE_NO_LRO - struct ixgbe_lro_stats lro_stats; -#endif - -#ifdef ETHTOOL_TEST - u32 test_icr; - struct ixgbe_ring test_tx_ring; - struct ixgbe_ring test_rx_ring; -#endif - - /* structs defined in ixgbe_hw.h */ - struct ixgbe_hw hw; - u16 msg_enable; - struct ixgbe_hw_stats stats; -#ifndef IXGBE_NO_LLI - u32 lli_port; - u32 lli_size; - u32 lli_etype; - u32 lli_vlan_pri; -#endif /* IXGBE_NO_LLI */ - - u32 *config_space; - u64 tx_busy; - unsigned int tx_ring_count; - unsigned int rx_ring_count; - - u32 link_speed; - bool link_up; - unsigned long link_check_timeout; - - struct timer_list service_timer; - struct work_struct service_task; - - struct hlist_head fdir_filter_list; - unsigned long fdir_overflow; /* number of times ATR was backed off */ - union ixgbe_atr_input fdir_mask; - int fdir_filter_count; - u32 fdir_pballoc; - u32 atr_sample_rate; - spinlock_t fdir_perfect_lock; - -#ifdef IXGBE_FCOE - struct ixgbe_fcoe fcoe; -#endif /* IXGBE_FCOE */ - u32 wol; - - u16 bd_number; - - char eeprom_id[32]; - u16 eeprom_cap; - bool netdev_registered; - u32 interrupt_event; -#ifdef HAVE_ETHTOOL_SET_PHYS_ID - u32 led_reg; -#endif - - DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS); - unsigned int num_vfs; - struct vf_data_storage *vfinfo; - int vf_rate_link_speed; - struct vf_macvlans vf_mvs; - struct vf_macvlans *mv_list; -#ifdef CONFIG_PCI_IOV - u32 timer_event_accumulator; - u32 vferr_refcount; -#endif - struct ixgbe_mac_addr *mac_table; -#ifdef IXGBE_SYSFS - struct kobject *info_kobj; - struct kobject *therm_kobj[IXGBE_MAX_SENSORS]; -#else /* IXGBE_SYSFS */ -#ifdef IXGBE_PROCFS - struct proc_dir_entry *eth_dir; - struct proc_dir_entry *info_dir; - struct proc_dir_entry *therm_dir[IXGBE_MAX_SENSORS]; - struct ixgbe_therm_proc_data therm_data[IXGBE_MAX_SENSORS]; -#endif /* IXGBE_PROCFS */ -#endif /* IXGBE_SYSFS */ -}; - -struct ixgbe_fdir_filter { - struct hlist_node fdir_node; - union ixgbe_atr_input filter; - u16 sw_idx; - u16 action; -}; - -enum ixgbe_state_t { - __IXGBE_TESTING, - __IXGBE_RESETTING, - __IXGBE_DOWN, - __IXGBE_SERVICE_SCHED, - __IXGBE_IN_SFP_INIT, -}; - -struct ixgbe_cb { -#ifdef CONFIG_IXGBE_DISABLE_PACKET_SPLIT - union { /* Union defining head/tail partner */ - struct sk_buff *head; - struct sk_buff *tail; - }; -#endif - dma_addr_t dma; -#ifndef IXGBE_NO_LRO - __be32 tsecr; /* timestamp echo response */ - u32 tsval; /* timestamp value in host order */ - u32 next_seq; /* next expected sequence number */ - u16 free; /* 65521 minus total size */ - u16 mss; /* size of data portion of packet */ -#endif /* IXGBE_NO_LRO */ -#ifdef HAVE_VLAN_RX_REGISTER - u16 vid; /* VLAN tag */ -#endif - u16 append_cnt; /* number of skb's appended */ -#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT - bool page_released; -#endif -}; -#define IXGBE_CB(skb) ((struct ixgbe_cb *)(skb)->cb) - -#ifdef IXGBE_SYSFS -void ixgbe_sysfs_exit(struct ixgbe_adapter *adapter); -int ixgbe_sysfs_init(struct ixgbe_adapter *adapter); -#endif /* IXGBE_SYSFS */ -#ifdef IXGBE_PROCFS -void ixgbe_procfs_exit(struct ixgbe_adapter *adapter); -int ixgbe_procfs_init(struct ixgbe_adapter *adapter); -int ixgbe_procfs_topdir_init(void); -void ixgbe_procfs_topdir_exit(void); -#endif /* IXGBE_PROCFS */ - -extern struct dcbnl_rtnl_ops dcbnl_ops; -extern int ixgbe_copy_dcb_cfg(struct ixgbe_adapter *adapter, int tc_max); - -extern u8 ixgbe_dcb_txq_to_tc(struct ixgbe_adapter *adapter, u8 index); - -/* needed by ixgbe_main.c */ -extern int ixgbe_validate_mac_addr(u8 *mc_addr); -extern void ixgbe_check_options(struct ixgbe_adapter *adapter); -extern void ixgbe_assign_netdev_ops(struct net_device *netdev); - -/* needed by ixgbe_ethtool.c */ -extern char ixgbe_driver_name[]; -extern const char ixgbe_driver_version[]; - -extern void ixgbe_up(struct ixgbe_adapter *adapter); -extern void ixgbe_down(struct ixgbe_adapter *adapter); -extern void ixgbe_reinit_locked(struct ixgbe_adapter *adapter); -extern void ixgbe_reset(struct ixgbe_adapter *adapter); -extern void ixgbe_set_ethtool_ops(struct net_device *netdev); -extern int ixgbe_setup_rx_resources(struct ixgbe_ring *); -extern int ixgbe_setup_tx_resources(struct ixgbe_ring *); -extern void ixgbe_free_rx_resources(struct ixgbe_ring *); -extern void ixgbe_free_tx_resources(struct ixgbe_ring *); -extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *, - struct ixgbe_ring *); -extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *, - struct ixgbe_ring *); -extern void ixgbe_update_stats(struct ixgbe_adapter *adapter); -extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter); -extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter); -extern bool ixgbe_is_ixgbe(struct pci_dev *pcidev); -extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *, - struct ixgbe_adapter *, - struct ixgbe_ring *); -extern void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *, - struct ixgbe_tx_buffer *); -extern void ixgbe_alloc_rx_buffers(struct ixgbe_ring *, u16); -extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, - struct ixgbe_ring *); -extern void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter, - struct ixgbe_ring *); -extern void ixgbe_set_rx_mode(struct net_device *netdev); -extern int ixgbe_write_mc_addr_list(struct net_device *netdev); -extern int ixgbe_setup_tc(struct net_device *dev, u8 tc); -#ifdef IXGBE_FCOE -extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32); -#endif /* IXGBE_FCOE */ -extern void ixgbe_do_reset(struct net_device *netdev); -extern void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector); -extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, - struct ixgbe_ring *); -extern void ixgbe_vlan_stripping_enable(struct ixgbe_adapter *adapter); -extern void ixgbe_vlan_stripping_disable(struct ixgbe_adapter *adapter); -#ifdef ETHTOOL_OPS_COMPAT -extern int ethtool_ioctl(struct ifreq *ifr); -#endif - -#ifdef IXGBE_FCOE -extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter); -extern int ixgbe_fso(struct ixgbe_ring *tx_ring, - struct ixgbe_tx_buffer *first, - u8 *hdr_len); -extern void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter); -extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, - union ixgbe_adv_rx_desc *rx_desc, - struct sk_buff *skb); -extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, - struct scatterlist *sgl, unsigned int sgc); -#ifdef HAVE_NETDEV_OPS_FCOE_DDP_TARGET -extern int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid, - struct scatterlist *sgl, unsigned int sgc); -#endif /* HAVE_NETDEV_OPS_FCOE_DDP_TARGET */ -extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid); -#ifdef HAVE_NETDEV_OPS_FCOE_ENABLE -extern int ixgbe_fcoe_enable(struct net_device *netdev); -extern int ixgbe_fcoe_disable(struct net_device *netdev); -#endif /* HAVE_NETDEV_OPS_FCOE_ENABLE */ -#ifdef CONFIG_DCB -#ifdef HAVE_DCBNL_OPS_GETAPP -extern u8 ixgbe_fcoe_getapp(struct net_device *netdev); -#endif /* HAVE_DCBNL_OPS_GETAPP */ -extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up); -#endif /* CONFIG_DCB */ -#ifdef HAVE_NETDEV_OPS_FCOE_GETWWN -extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type); -#endif -#endif /* IXGBE_FCOE */ - -#ifdef CONFIG_DCB -#ifdef HAVE_DCBNL_IEEE -s32 ixgbe_dcb_hw_ets(struct ixgbe_hw *hw, struct ieee_ets *ets, int max_frame); -#endif /* HAVE_DCBNL_IEEE */ -#endif /* CONFIG_DCB */ - -extern void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring); -#ifndef ETHTOOL_GLINKSETTINGS -extern int ixgbe_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd); -#endif -extern int ixgbe_write_uc_addr_list(struct ixgbe_adapter *adapter, - struct net_device *netdev, unsigned int vfn); -extern void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter); -extern int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, - u8 *addr, u16 queue); -extern int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, - u8 *addr, u16 queue); -extern int ixgbe_available_rars(struct ixgbe_adapter *adapter); -#ifndef HAVE_VLAN_RX_REGISTER -extern void ixgbe_vlan_mode(struct net_device *, u32); -#endif -#ifndef ixgbe_get_netdev_tc_txq -#define ixgbe_get_netdev_tc_txq(dev, tc) (&dev->tc_to_txq[tc]) -#endif -extern void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter); -#endif /* _IXGBE_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c deleted file mode 100644 index 242de671e4..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c +++ /dev/null @@ -1,1281 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_type.h" -#include "ixgbe_82598.h" -#include "ixgbe_api.h" -#include "ixgbe_common.h" -#include "ixgbe_phy.h" - -static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg); -static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw); -static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, - bool autoneg_wait_to_complete); -static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, bool *link_up, - bool link_up_wait_to_complete); -static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); -static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); -static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); -static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); -static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw); -static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, - u32 headroom, int strategy); - -/** - * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout - * @hw: pointer to the HW structure - * - * The defaults for 82598 should be in the range of 50us to 50ms, - * however the hardware default for these parts is 500us to 1ms which is less - * than the 10ms recommended by the pci-e spec. To address this we need to - * increase the value to either 10ms to 250ms for capability version 1 config, - * or 16ms to 55ms for version 2. - **/ -void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) -{ - u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); - u16 pcie_devctl2; - - /* only take action if timeout value is defaulted to 0 */ - if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) - goto out; - - /* - * if capababilities version is type 1 we can write the - * timeout of 10ms to 250ms through the GCR register - */ - if (!(gcr & IXGBE_GCR_CAP_VER2)) { - gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; - goto out; - } - - /* - * for version 2 capabilities we need to write the config space - * directly in order to set the completion timeout value for - * 16ms to 55ms - */ - pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2); - pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; - IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); -out: - /* disable completion timeout resend */ - gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; - IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); -} - -/** - * ixgbe_init_ops_82598 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure - * - * Initialize the function pointers and assign the MAC type for 82598. - * Does not touch the hardware. - **/ -s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - struct ixgbe_phy_info *phy = &hw->phy; - s32 ret_val; - - ret_val = ixgbe_init_phy_ops_generic(hw); - ret_val = ixgbe_init_ops_generic(hw); - - /* PHY */ - phy->ops.init = &ixgbe_init_phy_ops_82598; - - /* MAC */ - mac->ops.start_hw = &ixgbe_start_hw_82598; - mac->ops.reset_hw = &ixgbe_reset_hw_82598; - mac->ops.get_media_type = &ixgbe_get_media_type_82598; - mac->ops.get_supported_physical_layer = - &ixgbe_get_supported_physical_layer_82598; - mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82598; - mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82598; - mac->ops.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598; - - /* RAR, Multicast, VLAN */ - mac->ops.set_vmdq = &ixgbe_set_vmdq_82598; - mac->ops.clear_vmdq = &ixgbe_clear_vmdq_82598; - mac->ops.set_vfta = &ixgbe_set_vfta_82598; - mac->ops.set_vlvf = NULL; - mac->ops.clear_vfta = &ixgbe_clear_vfta_82598; - - /* Flow Control */ - mac->ops.fc_enable = &ixgbe_fc_enable_82598; - - mac->mcft_size = 128; - mac->vft_size = 128; - mac->num_rar_entries = 16; - mac->rx_pb_size = 512; - mac->max_tx_queues = 32; - mac->max_rx_queues = 64; - mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); - - /* SFP+ Module */ - phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598; - - /* Link */ - mac->ops.check_link = &ixgbe_check_mac_link_82598; - mac->ops.setup_link = &ixgbe_setup_mac_link_82598; - mac->ops.flap_tx_laser = NULL; - mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82598; - mac->ops.setup_rxpba = &ixgbe_set_rxpba_82598; - - /* Manageability interface */ - mac->ops.set_fw_drv_ver = NULL; - - return ret_val; -} - -/** - * ixgbe_init_phy_ops_82598 - PHY/SFP specific init - * @hw: pointer to hardware structure - * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. - * - **/ -s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - struct ixgbe_phy_info *phy = &hw->phy; - s32 ret_val = 0; - u16 list_offset, data_offset; - - /* Identify the PHY */ - phy->ops.identify(hw); - - /* Overwrite the link function pointers if copper PHY */ - if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { - mac->ops.setup_link = &ixgbe_setup_copper_link_82598; - mac->ops.get_link_capabilities = - &ixgbe_get_copper_link_capabilities_generic; - } - - switch (hw->phy.type) { - case ixgbe_phy_tn: - phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; - phy->ops.check_link = &ixgbe_check_phy_link_tnx; - phy->ops.get_firmware_version = - &ixgbe_get_phy_firmware_version_tnx; - break; - case ixgbe_phy_nl: - phy->ops.reset = &ixgbe_reset_phy_nl; - - /* Call SFP+ identify routine to get the SFP+ module type */ - ret_val = phy->ops.identify_sfp(hw); - if (ret_val != 0) - goto out; - else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { - ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; - goto out; - } - - /* Check to see if SFP+ module is supported */ - ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, - &list_offset, - &data_offset); - if (ret_val != 0) { - ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; - goto out; - } - break; - default: - break; - } - -out: - return ret_val; -} - -/** - * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure - * - * Starts the hardware using the generic start_hw function. - * Disables relaxed ordering Then set pcie completion timeout - * - **/ -s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) -{ - u32 regval; - u32 i; - s32 ret_val = 0; - - ret_val = ixgbe_start_hw_generic(hw); - - /* Disable relaxed ordering */ - for (i = 0; ((i < hw->mac.max_tx_queues) && - (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); - regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); - } - - for (i = 0; ((i < hw->mac.max_rx_queues) && - (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); - regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | - IXGBE_DCA_RXCTRL_HEAD_WRO_EN); - IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); - } - - /* set the completion timeout for interface */ - if (ret_val == 0) - ixgbe_set_pcie_completion_timeout(hw); - - return ret_val; -} - -/** - * ixgbe_get_link_capabilities_82598 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: boolean auto-negotiation value - * - * Determines the link capabilities by reading the AUTOC register. - **/ -static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) -{ - s32 status = 0; - u32 autoc = 0; - - /* - * Determine link capabilities based on the stored value of AUTOC, - * which represents EEPROM defaults. If AUTOC value has not been - * stored, use the current register value. - */ - if (hw->mac.orig_link_settings_stored) - autoc = hw->mac.orig_autoc; - else - autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *autoneg = false; - break; - - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - *speed = IXGBE_LINK_SPEED_10GB_FULL; - *autoneg = false; - break; - - case IXGBE_AUTOC_LMS_1G_AN: - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *autoneg = true; - break; - - case IXGBE_AUTOC_LMS_KX4_AN: - case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: - *speed = IXGBE_LINK_SPEED_UNKNOWN; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX_SUPP) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *autoneg = true; - break; - - default: - status = IXGBE_ERR_LINK_SETUP; - break; - } - - return status; -} - -/** - * ixgbe_get_media_type_82598 - Determines media type - * @hw: pointer to hardware structure - * - * Returns the media type (fiber, copper, backplane) - **/ -static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) -{ - enum ixgbe_media_type media_type; - - /* Detect if there is a copper PHY attached. */ - switch (hw->phy.type) { - case ixgbe_phy_cu_unknown: - case ixgbe_phy_tn: - media_type = ixgbe_media_type_copper; - goto out; - default: - break; - } - - /* Media type for I82598 is based on device ID */ - switch (hw->device_id) { - case IXGBE_DEV_ID_82598: - case IXGBE_DEV_ID_82598_BX: - /* Default device ID is mezzanine card KX/KX4 */ - media_type = ixgbe_media_type_backplane; - break; - case IXGBE_DEV_ID_82598AF_DUAL_PORT: - case IXGBE_DEV_ID_82598AF_SINGLE_PORT: - case IXGBE_DEV_ID_82598_DA_DUAL_PORT: - case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: - case IXGBE_DEV_ID_82598EB_XF_LR: - case IXGBE_DEV_ID_82598EB_SFP_LOM: - media_type = ixgbe_media_type_fiber; - break; - case IXGBE_DEV_ID_82598EB_CX4: - case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: - media_type = ixgbe_media_type_cx4; - break; - case IXGBE_DEV_ID_82598AT: - case IXGBE_DEV_ID_82598AT2: - media_type = ixgbe_media_type_copper; - break; - default: - media_type = ixgbe_media_type_unknown; - break; - } -out: - return media_type; -} - -/** - * ixgbe_fc_enable_82598 - Enable flow control - * @hw: pointer to hardware structure - * - * Enable flow control according to the current settings. - **/ -s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - u32 fctrl_reg; - u32 rmcs_reg; - u32 reg; - u32 fcrtl, fcrth; - u32 link_speed = 0; - int i; - bool link_up; - - /* Validate the water mark configuration */ - if (!hw->fc.pause_time) { - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - - /* Low water mark of zero causes XOFF floods */ - for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { - if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && - hw->fc.high_water[i]) { - if (!hw->fc.low_water[i] || - hw->fc.low_water[i] >= hw->fc.high_water[i]) { - hw_dbg(hw, "Invalid water mark configuration\n"); - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - } - } - - /* - * On 82598 having Rx FC on causes resets while doing 1G - * so if it's on turn it off once we know link_speed. For - * more details see 82598 Specification update. - */ - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { - switch (hw->fc.requested_mode) { - case ixgbe_fc_full: - hw->fc.requested_mode = ixgbe_fc_tx_pause; - break; - case ixgbe_fc_rx_pause: - hw->fc.requested_mode = ixgbe_fc_none; - break; - default: - /* no change */ - break; - } - } - - /* Negotiate the fc mode to use */ - ixgbe_fc_autoneg(hw); - - /* Disable any previous flow control settings */ - fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); - fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); - - rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); - rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); - - /* - * The possible values of fc.current_mode are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but - * we do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. - * other: Invalid. - */ - switch (hw->fc.current_mode) { - case ixgbe_fc_none: - /* - * Flow control is disabled by software override or autoneg. - * The code below will actually disable it in the HW. - */ - break; - case ixgbe_fc_rx_pause: - /* - * Rx Flow control is enabled and Tx Flow control is - * disabled by software override. Since there really - * isn't a way to advertise that we are capable of RX - * Pause ONLY, we will advertise that we support both - * symmetric and asymmetric Rx PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. - */ - fctrl_reg |= IXGBE_FCTRL_RFCE; - break; - case ixgbe_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is - * disabled by software override. - */ - rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; - break; - case ixgbe_fc_full: - /* Flow control (both Rx and Tx) is enabled by SW override. */ - fctrl_reg |= IXGBE_FCTRL_RFCE; - rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; - break; - default: - hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = IXGBE_ERR_CONFIG; - goto out; - break; - } - - /* Set 802.3x based flow control settings. */ - fctrl_reg |= IXGBE_FCTRL_DPF; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); - IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); - - /* Set up and enable Rx high/low water mark thresholds, enable XON. */ - for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { - if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && - hw->fc.high_water[i]) { - fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; - fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; - IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); - IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); - } else { - IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); - } - - } - - /* Configure pause time (2 TCs per register) */ - reg = hw->fc.pause_time * 0x00010001; - for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) - IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); - - /* Configure flow control refresh threshold value */ - IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); - -out: - return ret_val; -} - -/** - * ixgbe_start_mac_link_82598 - Configures MAC link settings - * @hw: pointer to hardware structure - * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. - **/ -static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, - bool autoneg_wait_to_complete) -{ - u32 autoc_reg; - u32 links_reg; - u32 i; - s32 status = 0; - - /* Restart link */ - autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - - /* Only poll for autoneg to complete if specified to do so */ - if (autoneg_wait_to_complete) { - if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_AN || - (autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { - links_reg = 0; /* Just in case Autoneg time = 0 */ - for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - if (links_reg & IXGBE_LINKS_KX_AN_COMP) - break; - msleep(100); - } - if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { - status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; - hw_dbg(hw, "Autonegotiation did not complete.\n"); - } - } - } - - /* Add delay to filter out noises during initial link setup */ - msleep(50); - - return status; -} - -/** - * ixgbe_validate_link_ready - Function looks for phy link - * @hw: pointer to hardware structure - * - * Function indicates success when phy link is available. If phy is not ready - * within 5 seconds of MAC indicating link, the function returns error. - **/ -static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) -{ - u32 timeout; - u16 an_reg; - - if (hw->device_id != IXGBE_DEV_ID_82598AT2) - return 0; - - for (timeout = 0; - timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg); - - if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) && - (an_reg & IXGBE_MII_AUTONEG_LINK_UP)) - break; - - msleep(100); - } - - if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { - hw_dbg(hw, "Link was indicated but link is down\n"); - return IXGBE_ERR_LINK_SETUP; - } - - return 0; -} - -/** - * ixgbe_check_mac_link_82598 - Get link/speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true is link is up, false otherwise - * @link_up_wait_to_complete: bool used to wait for link up or not - * - * Reads the links register to determine if link is up and the current speed - **/ -static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, bool *link_up, - bool link_up_wait_to_complete) -{ - u32 links_reg; - u32 i; - u16 link_reg, adapt_comp_reg; - - /* - * SERDES PHY requires us to read link status from undocumented - * register 0xC79F. Bit 0 set indicates link is up/ready; clear - * indicates link down. OxC00C is read to check that the XAUI lanes - * are active. Bit 0 clear indicates active; set indicates inactive. - */ - if (hw->phy.type == ixgbe_phy_nl) { - hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); - hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); - hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, - &adapt_comp_reg); - if (link_up_wait_to_complete) { - for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { - if ((link_reg & 1) && - ((adapt_comp_reg & 1) == 0)) { - *link_up = true; - break; - } else { - *link_up = false; - } - msleep(100); - hw->phy.ops.read_reg(hw, 0xC79F, - IXGBE_TWINAX_DEV, - &link_reg); - hw->phy.ops.read_reg(hw, 0xC00C, - IXGBE_TWINAX_DEV, - &adapt_comp_reg); - } - } else { - if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) - *link_up = true; - else - *link_up = false; - } - - if (*link_up == false) - goto out; - } - - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - if (link_up_wait_to_complete) { - for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { - if (links_reg & IXGBE_LINKS_UP) { - *link_up = true; - break; - } else { - *link_up = false; - } - msleep(100); - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - } - } else { - if (links_reg & IXGBE_LINKS_UP) - *link_up = true; - else - *link_up = false; - } - - if (links_reg & IXGBE_LINKS_SPEED) - *speed = IXGBE_LINK_SPEED_10GB_FULL; - else - *speed = IXGBE_LINK_SPEED_1GB_FULL; - - if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) && - (ixgbe_validate_link_ready(hw) != 0)) - *link_up = false; - -out: - return 0; -} - -/** - * ixgbe_setup_mac_link_82598 - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Set the link speed in the AUTOC register and restarts link. - **/ -static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status = 0; - ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; - u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 autoc = curr_autoc; - u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; - - /* Check to see if speed passed in is supported. */ - ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); - speed &= link_capabilities; - - if (speed == IXGBE_LINK_SPEED_UNKNOWN) - status = IXGBE_ERR_LINK_SETUP; - - /* Set KX4/KX support according to speed requested */ - else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || - link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { - autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - autoc |= IXGBE_AUTOC_KX4_SUPP; - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - autoc |= IXGBE_AUTOC_KX_SUPP; - if (autoc != curr_autoc) - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); - } - - if (status == 0) { - /* - * Setup and restart the link based on the new values in - * ixgbe_hw This will write the AUTOC register based on the new - * stored values - */ - status = ixgbe_start_mac_link_82598(hw, - autoneg_wait_to_complete); - } - - return status; -} - - -/** - * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true if waiting is needed to complete - * - * Sets the link speed in the AUTOC register in the MAC and restarts link. - **/ -static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status; - - /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, - autoneg_wait_to_complete); - /* Set up MAC */ - ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); - - return status; -} - -/** - * ixgbe_reset_hw_82598 - Performs hardware reset - * @hw: pointer to hardware structure - * - * Resets the hardware by resetting the transmit and receive units, masks and - * clears all interrupts, performing a PHY reset, and performing a link (MAC) - * reset. - **/ -static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) -{ - s32 status = 0; - s32 phy_status = 0; - u32 ctrl; - u32 gheccr; - u32 i; - u32 autoc; - u8 analog_val; - - /* Call adapter stop to disable tx/rx and clear interrupts */ - status = hw->mac.ops.stop_adapter(hw); - if (status != 0) - goto reset_hw_out; - - /* - * Power up the Atlas Tx lanes if they are currently powered down. - * Atlas Tx lanes are powered down for MAC loopback tests, but - * they are not automatically restored on reset. - */ - hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); - if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { - /* Enable Tx Atlas so packets can be transmitted again */ - hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, - &analog_val); - analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; - hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, - analog_val); - - hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, - &analog_val); - analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; - hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, - analog_val); - - hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, - &analog_val); - analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; - hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, - analog_val); - - hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, - &analog_val); - analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; - hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, - analog_val); - } - - /* Reset PHY */ - if (hw->phy.reset_disable == false) { - /* PHY ops must be identified and initialized prior to reset */ - - /* Init PHY and function pointers, perform SFP setup */ - phy_status = hw->phy.ops.init(hw); - if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto reset_hw_out; - if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) - goto mac_reset_top; - - hw->phy.ops.reset(hw); - } - -mac_reset_top: - /* - * Issue global reset to the MAC. This needs to be a SW reset. - * If link reset is used, it might reset the MAC when mng is using it - */ - ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; - IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); - IXGBE_WRITE_FLUSH(hw); - - /* Poll for reset bit to self-clear indicating reset is complete */ - for (i = 0; i < 10; i++) { - udelay(1); - ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); - if (!(ctrl & IXGBE_CTRL_RST)) - break; - } - if (ctrl & IXGBE_CTRL_RST) { - status = IXGBE_ERR_RESET_FAILED; - hw_dbg(hw, "Reset polling failed to complete.\n"); - } - - msleep(50); - - /* - * Double resets are required for recovery from certain error - * conditions. Between resets, it is necessary to stall to allow time - * for any pending HW events to complete. - */ - if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { - hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; - goto mac_reset_top; - } - - gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); - gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); - IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); - - /* - * Store the original AUTOC value if it has not been - * stored off yet. Otherwise restore the stored original - * AUTOC value since the reset operation sets back to deaults. - */ - autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - if (hw->mac.orig_link_settings_stored == false) { - hw->mac.orig_autoc = autoc; - hw->mac.orig_link_settings_stored = true; - } else if (autoc != hw->mac.orig_autoc) { - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); - } - - /* Store the permanent mac address */ - hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); - - /* - * Store MAC address from RAR0, clear receive address registers, and - * clear the multicast table - */ - hw->mac.ops.init_rx_addrs(hw); - -reset_hw_out: - if (phy_status != 0) - status = phy_status; - - return status; -} - -/** - * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq set index - **/ -s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 rar_high; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (rar >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); - rar_high &= ~IXGBE_RAH_VIND_MASK; - rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); - IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); - return 0; -} - -/** - * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq clear index (not used in 82598, but elsewhere) - **/ -static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 rar_high; - u32 rar_entries = hw->mac.num_rar_entries; - - - /* Make sure we are using a valid rar index range */ - if (rar >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); - if (rar_high & IXGBE_RAH_VIND_MASK) { - rar_high &= ~IXGBE_RAH_VIND_MASK; - IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); - } - - return 0; -} - -/** - * ixgbe_set_vfta_82598 - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFTA - * @vlan_on: boolean flag to turn on/off VLAN in VFTA - * - * Turn on/off specified VLAN in the VLAN filter table. - **/ -s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on) -{ - u32 regindex; - u32 bitindex; - u32 bits; - u32 vftabyte; - - if (vlan > 4095) - return IXGBE_ERR_PARAM; - - /* Determine 32-bit word position in array */ - regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ - - /* Determine the location of the (VMD) queue index */ - vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ - bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ - - /* Set the nibble for VMD queue index */ - bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); - bits &= (~(0x0F << bitindex)); - bits |= (vind << bitindex); - IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); - - /* Determine the location of the bit for this VLAN id */ - bitindex = vlan & 0x1F; /* lower five bits */ - - bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); - if (vlan_on) - /* Turn on this VLAN id */ - bits |= (1 << bitindex); - else - /* Turn off this VLAN id */ - bits &= ~(1 << bitindex); - IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); - - return 0; -} - -/** - * ixgbe_clear_vfta_82598 - Clear VLAN filter table - * @hw: pointer to hardware structure - * - * Clears the VLAN filer table, and the VMDq index associated with the filter - **/ -static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) -{ - u32 offset; - u32 vlanbyte; - - for (offset = 0; offset < hw->mac.vft_size; offset++) - IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); - - for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) - for (offset = 0; offset < hw->mac.vft_size; offset++) - IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), - 0); - - return 0; -} - -/** - * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value - * - * Performs read operation to Atlas analog register specified. - **/ -s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) -{ - u32 atlas_ctl; - - IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, - IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); - IXGBE_WRITE_FLUSH(hw); - udelay(10); - atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); - *val = (u8)atlas_ctl; - - return 0; -} - -/** - * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register - * @hw: pointer to hardware structure - * @reg: atlas register to write - * @val: value to write - * - * Performs write operation to Atlas analog register specified. - **/ -s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) -{ - u32 atlas_ctl; - - atlas_ctl = (reg << 8) | val; - IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); - IXGBE_WRITE_FLUSH(hw); - udelay(10); - - return 0; -} - -/** - * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read - * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data) -{ - s32 status = 0; - u16 sfp_addr = 0; - u16 sfp_data = 0; - u16 sfp_stat = 0; - u32 i; - - if (hw->phy.type == ixgbe_phy_nl) { - /* - * NetLogic phy SDA/SCL registers are at addresses 0xC30A to - * 0xC30D. These registers are used to talk to the SFP+ - * module's EEPROM through the SDA/SCL (I2C) interface. - */ - sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; - sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); - hw->phy.ops.write_reg(hw, - IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - sfp_addr); - - /* Poll status */ - for (i = 0; i < 100; i++) { - hw->phy.ops.read_reg(hw, - IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &sfp_stat); - sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; - if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) - break; - msleep(10); - } - - if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { - hw_dbg(hw, "EEPROM read did not pass.\n"); - status = IXGBE_ERR_SFP_NOT_PRESENT; - goto out; - } - - /* Read data */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); - - *eeprom_data = (u8)(sfp_data >> 8); - } else { - status = IXGBE_ERR_PHY; - goto out; - } - -out: - return status; -} - -/** - * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) -{ - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; - u16 ext_ability = 0; - - hw->phy.ops.identify(hw); - - /* Copper PHY must be checked before AUTOC LMS to determine correct - * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ - switch (hw->phy.type) { - case ixgbe_phy_tn: - case ixgbe_phy_cu_unknown: - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); - if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; - goto out; - default: - break; - } - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_AN: - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; - else - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; - break; - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; - else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - else /* XAUI */ - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - break; - case IXGBE_AUTOC_LMS_KX4_AN: - case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: - if (autoc & IXGBE_AUTOC_KX_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - break; - default: - break; - } - - if (hw->phy.type == ixgbe_phy_nl) { - hw->phy.ops.identify_sfp(hw); - - switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_da_cu: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case ixgbe_sfp_type_sr: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - break; - case ixgbe_sfp_type_lr: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - break; - default: - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - break; - } - } - - switch (hw->device_id) { - case IXGBE_DEV_ID_82598_DA_DUAL_PORT: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case IXGBE_DEV_ID_82598AF_DUAL_PORT: - case IXGBE_DEV_ID_82598AF_SINGLE_PORT: - case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - break; - case IXGBE_DEV_ID_82598EB_XF_LR: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - break; - default: - break; - } - -out: - return physical_layer; -} - -/** - * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple - * port devices. - * @hw: pointer to the HW structure - * - * Calls common function and corrects issue with some single port devices - * that enable LAN1 but not LAN0. - **/ -void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) -{ - struct ixgbe_bus_info *bus = &hw->bus; - u16 pci_gen = 0; - u16 pci_ctrl2 = 0; - - ixgbe_set_lan_id_multi_port_pcie(hw); - - /* check if LAN0 is disabled */ - hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); - if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { - - hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); - - /* if LAN0 is completely disabled force function to 0 */ - if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && - !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && - !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { - - bus->func = 0; - } - } -} - -/** - * ixgbe_set_rxpba_82598 - Initialize RX packet buffer - * @hw: pointer to hardware structure - * @num_pb: number of packet buffers to allocate - * @headroom: reserve n KB of headroom - * @strategy: packet buffer allocation strategy - **/ -static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, - u32 headroom, int strategy) -{ - u32 rxpktsize = IXGBE_RXPBSIZE_64KB; - u8 i = 0; - - if (!num_pb) - return; - - /* Setup Rx packet buffer sizes */ - switch (strategy) { - case PBA_STRATEGY_WEIGHTED: - /* Setup the first four at 80KB */ - rxpktsize = IXGBE_RXPBSIZE_80KB; - for (; i < 4; i++) - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); - /* Setup the last four at 48KB...don't re-init i */ - rxpktsize = IXGBE_RXPBSIZE_48KB; - /* Fall Through */ - case PBA_STRATEGY_EQUAL: - default: - /* Divide the remaining Rx packet buffer evenly among the TCs */ - for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); - break; - } - - /* Setup Tx packet buffer sizes */ - for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) - IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); - - return; -} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h deleted file mode 100644 index 9a8c670a7e..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_82598_H_ -#define _IXGBE_82598_H_ - -u32 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw); -s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw); -s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw); -s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); -s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on); -s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val); -s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val); -s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data); -u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw); -s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw); -void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw); -void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw); -#endif /* _IXGBE_82598_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c deleted file mode 100644 index 3f15912307..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c +++ /dev/null @@ -1,2299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_type.h" -#include "ixgbe_82599.h" -#include "ixgbe_api.h" -#include "ixgbe_common.h" -#include "ixgbe_phy.h" - -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); -static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); -static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, - u16 offset, u16 *data); -static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data); -static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data); - -void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - - /* enable the laser control functions for SFP+ fiber */ - if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { - mac->ops.disable_tx_laser = - &ixgbe_disable_tx_laser_multispeed_fiber; - mac->ops.enable_tx_laser = - &ixgbe_enable_tx_laser_multispeed_fiber; - mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; - - } else { - mac->ops.disable_tx_laser = NULL; - mac->ops.enable_tx_laser = NULL; - mac->ops.flap_tx_laser = NULL; - } - - if (hw->phy.multispeed_fiber) { - /* Set up dual speed SFP+ support */ - mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; - } else { - if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) && - (hw->phy.smart_speed == ixgbe_smart_speed_auto || - hw->phy.smart_speed == ixgbe_smart_speed_on) && - !ixgbe_verify_lesm_fw_enabled_82599(hw)) { - mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; - } else { - mac->ops.setup_link = &ixgbe_setup_mac_link_82599; - } - } -} - -/** - * ixgbe_init_phy_ops_82599 - PHY/SFP specific init - * @hw: pointer to hardware structure - * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. - * - **/ -s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - struct ixgbe_phy_info *phy = &hw->phy; - s32 ret_val = 0; - u32 esdp; - - if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { - /* Store flag indicating I2C bus access control unit. */ - hw->phy.qsfp_shared_i2c_bus = TRUE; - - /* Initialize access to QSFP+ I2C bus */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp |= IXGBE_ESDP_SDP0_DIR; - esdp &= ~IXGBE_ESDP_SDP1_DIR; - esdp &= ~IXGBE_ESDP_SDP0; - esdp &= ~IXGBE_ESDP_SDP0_NATIVE; - esdp &= ~IXGBE_ESDP_SDP1_NATIVE; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - - phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599; - phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599; - } - /* Identify the PHY or SFP module */ - ret_val = phy->ops.identify(hw); - if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto init_phy_ops_out; - - /* Setup function pointers based on detected SFP module and speeds */ - ixgbe_init_mac_link_ops_82599(hw); - if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) - hw->phy.ops.reset = NULL; - - /* If copper media, overwrite with copper function pointers */ - if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { - mac->ops.setup_link = &ixgbe_setup_copper_link_82599; - mac->ops.get_link_capabilities = - &ixgbe_get_copper_link_capabilities_generic; - } - - /* Set necessary function pointers based on phy type */ - switch (hw->phy.type) { - case ixgbe_phy_tn: - phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; - phy->ops.check_link = &ixgbe_check_phy_link_tnx; - phy->ops.get_firmware_version = - &ixgbe_get_phy_firmware_version_tnx; - break; - default: - break; - } -init_phy_ops_out: - return ret_val; -} - -s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - u32 reg_anlp1 = 0; - u32 i = 0; - u16 list_offset, data_offset, data_value; - - if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { - ixgbe_init_mac_link_ops_82599(hw); - - hw->phy.ops.reset = NULL; - - ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, - &data_offset); - if (ret_val != 0) - goto setup_sfp_out; - - /* PHY config will finish before releasing the semaphore */ - ret_val = hw->mac.ops.acquire_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); - if (ret_val != 0) { - ret_val = IXGBE_ERR_SWFW_SYNC; - goto setup_sfp_out; - } - - hw->eeprom.ops.read(hw, ++data_offset, &data_value); - while (data_value != 0xffff) { - IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); - IXGBE_WRITE_FLUSH(hw); - hw->eeprom.ops.read(hw, ++data_offset, &data_value); - } - - /* Release the semaphore */ - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); - /* Delay obtaining semaphore again to allow FW access */ - msleep(hw->eeprom.semaphore_delay); - - /* Now restart DSP by setting Restart_AN and clearing LMS */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, - IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | - IXGBE_AUTOC_AN_RESTART)); - - /* Wait for AN to leave state 0 */ - for (i = 0; i < 10; i++) { - msleep(4); - reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); - if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) - break; - } - if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { - hw_dbg(hw, "sfp module setup not complete\n"); - ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; - goto setup_sfp_out; - } - - /* Restart DSP by setting Restart_AN and return to SFI mode */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, - IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | - IXGBE_AUTOC_AN_RESTART)); - } - -setup_sfp_out: - return ret_val; -} - -/** - * ixgbe_init_ops_82599 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure - * - * Initialize the function pointers and assign the MAC type for 82599. - * Does not touch the hardware. - **/ - -s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - struct ixgbe_phy_info *phy = &hw->phy; - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - s32 ret_val; - - ixgbe_init_phy_ops_generic(hw); - ret_val = ixgbe_init_ops_generic(hw); - - /* PHY */ - phy->ops.identify = &ixgbe_identify_phy_82599; - phy->ops.init = &ixgbe_init_phy_ops_82599; - - /* MAC */ - mac->ops.reset_hw = &ixgbe_reset_hw_82599; - mac->ops.get_media_type = &ixgbe_get_media_type_82599; - mac->ops.get_supported_physical_layer = - &ixgbe_get_supported_physical_layer_82599; - mac->ops.disable_sec_rx_path = &ixgbe_disable_sec_rx_path_generic; - mac->ops.enable_sec_rx_path = &ixgbe_enable_sec_rx_path_generic; - mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599; - mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599; - mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599; - mac->ops.start_hw = &ixgbe_start_hw_82599; - mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic; - mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic; - mac->ops.get_device_caps = &ixgbe_get_device_caps_generic; - mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic; - mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic; - - /* RAR, Multicast, VLAN */ - mac->ops.set_vmdq = &ixgbe_set_vmdq_generic; - mac->ops.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic; - mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic; - mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic; - mac->rar_highwater = 1; - mac->ops.set_vfta = &ixgbe_set_vfta_generic; - mac->ops.set_vlvf = &ixgbe_set_vlvf_generic; - mac->ops.clear_vfta = &ixgbe_clear_vfta_generic; - mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic; - mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599; - mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing; - mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing; - - /* Link */ - mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599; - mac->ops.check_link = &ixgbe_check_mac_link_generic; - mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic; - ixgbe_init_mac_link_ops_82599(hw); - - mac->mcft_size = 128; - mac->vft_size = 128; - mac->num_rar_entries = 128; - mac->rx_pb_size = 512; - mac->max_tx_queues = 128; - mac->max_rx_queues = 128; - mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); - - mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) & - IXGBE_FWSM_MODE_MASK) ? true : false; - - //hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf; - - /* EEPROM */ - eeprom->ops.read = &ixgbe_read_eeprom_82599; - eeprom->ops.read_buffer = &ixgbe_read_eeprom_buffer_82599; - - /* Manageability interface */ - mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic; - - mac->ops.get_thermal_sensor_data = - &ixgbe_get_thermal_sensor_data_generic; - mac->ops.init_thermal_sensor_thresh = - &ixgbe_init_thermal_sensor_thresh_generic; - - return ret_val; -} - -/** - * ixgbe_get_link_capabilities_82599 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @negotiation: true when autoneg or autotry is enabled - * - * Determines the link capabilities by reading the AUTOC register. - **/ -s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *negotiation) -{ - s32 status = 0; - u32 autoc = 0; - - /* Check if 1G SFP module. */ - if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - goto out; - } - - /* - * Determine link capabilities based on the stored value of AUTOC, - * which represents EEPROM defaults. If AUTOC value has not - * been stored, use the current register values. - */ - if (hw->mac.orig_link_settings_stored) - autoc = hw->mac.orig_autoc; - else - autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = false; - break; - - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; - break; - - case IXGBE_AUTOC_LMS_1G_AN: - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - break; - - case IXGBE_AUTOC_LMS_10G_SERIAL: - *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; - break; - - case IXGBE_AUTOC_LMS_KX4_KX_KR: - case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: - *speed = IXGBE_LINK_SPEED_UNKNOWN; - if (autoc & IXGBE_AUTOC_KR_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX_SUPP) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - break; - - case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: - *speed = IXGBE_LINK_SPEED_100_FULL; - if (autoc & IXGBE_AUTOC_KR_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX_SUPP) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - break; - - case IXGBE_AUTOC_LMS_SGMII_1G_100M: - *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; - *negotiation = false; - break; - - default: - status = IXGBE_ERR_LINK_SETUP; - goto out; - break; - } - - if (hw->phy.multispeed_fiber) { - *speed |= IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - } - -out: - return status; -} - -/** - * ixgbe_get_media_type_82599 - Get media type - * @hw: pointer to hardware structure - * - * Returns the media type (fiber, copper, backplane) - **/ -enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) -{ - enum ixgbe_media_type media_type; - - /* Detect if there is a copper PHY attached. */ - switch (hw->phy.type) { - case ixgbe_phy_cu_unknown: - case ixgbe_phy_tn: - media_type = ixgbe_media_type_copper; - goto out; - default: - break; - } - - switch (hw->device_id) { - case IXGBE_DEV_ID_82599_KX4: - case IXGBE_DEV_ID_82599_KX4_MEZZ: - case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: - case IXGBE_DEV_ID_82599_KR: - case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: - case IXGBE_DEV_ID_82599_XAUI_LOM: - /* Default device ID is mezzanine card KX/KX4 */ - media_type = ixgbe_media_type_backplane; - break; - case IXGBE_DEV_ID_82599_SFP: - case IXGBE_DEV_ID_82599_SFP_FCOE: - case IXGBE_DEV_ID_82599_SFP_EM: - case IXGBE_DEV_ID_82599_SFP_SF2: - case IXGBE_DEV_ID_82599EN_SFP: - media_type = ixgbe_media_type_fiber; - break; - case IXGBE_DEV_ID_82599_CX4: - media_type = ixgbe_media_type_cx4; - break; - case IXGBE_DEV_ID_82599_T3_LOM: - media_type = ixgbe_media_type_copper; - break; - case IXGBE_DEV_ID_82599_LS: - media_type = ixgbe_media_type_fiber_lco; - break; - case IXGBE_DEV_ID_82599_QSFP_SF_QP: - media_type = ixgbe_media_type_fiber_qsfp; - break; - default: - media_type = ixgbe_media_type_unknown; - break; - } -out: - return media_type; -} - -/** - * ixgbe_start_mac_link_82599 - Setup MAC link settings - * @hw: pointer to hardware structure - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. - **/ -s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, - bool autoneg_wait_to_complete) -{ - u32 autoc_reg; - u32 links_reg = 0; - u32 i; - s32 status = 0; - - /* Restart link */ - autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - - /* Only poll for autoneg to complete if specified to do so */ - if (autoneg_wait_to_complete) { - if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_KX_KR || - (autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || - (autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { - for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - if (links_reg & IXGBE_LINKS_KX_AN_COMP) - break; - msleep(100); - } - if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { - status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; - hw_dbg(hw, "Autoneg did not complete.\n"); - } - } - } - - /* Add delay to filter out noises during initial link setup */ - msleep(50); - - return status; -} - -/** - * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser - * @hw: pointer to hardware structure - * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively shutting down the Tx - * laser on the PHY, effectively halting physical link. - **/ -void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) -{ - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - - /* Disable tx laser; allow 100us to go dark per spec */ - esdp_reg |= IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - udelay(100); -} - -/** - * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser - * @hw: pointer to hardware structure - * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively turning on the Tx - * laser on the PHY, effectively starting physical link. - **/ -void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) -{ - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - - /* Enable tx laser; allow 100ms to light up */ - esdp_reg &= ~IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - msleep(100); -} - -/** - * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser - * @hw: pointer to hardware structure - * - * When the driver changes the link speeds that it can support, - * it sets autotry_restart to true to indicate that we need to - * initiate a new autotry session with the link partner. To do - * so, we set the speed then disable and re-enable the tx laser, to - * alert the link partner that it also needs to restart autotry on its - * end. This is consistent with true clause 37 autoneg, which also - * involves a loss of signal. - **/ -void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) -{ - if (hw->mac.autotry_restart) { - ixgbe_disable_tx_laser_multispeed_fiber(hw); - ixgbe_enable_tx_laser_multispeed_fiber(hw); - hw->mac.autotry_restart = false; - } -} - -/** - * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Set the link speed in the AUTOC register and restarts link. - **/ -s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status = 0; - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; - ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; - u32 speedcnt = 0; - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - u32 i = 0; - bool link_up = false; - bool negotiation; - - /* Mask off requested but non-supported speeds */ - status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation); - if (status != 0) - return status; - - speed &= link_speed; - - /* - * Try each speed one by one, highest priority first. We do this in - * software because 10gb fiber doesn't support speed autonegotiation. - */ - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - speedcnt++; - highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - - /* Allow module to change analog characteristics (1G->10G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_10GB_FULL, - autoneg, - autoneg_wait_to_complete); - if (status != 0) - return status; - - /* Flap the tx laser if it has not already been done */ - ixgbe_flap_tx_laser(hw); - - /* - * Wait for the controller to acquire link. Per IEEE 802.3ap, - * Section 73.10.2, we may have to wait up to 500ms if KR is - * attempted. 82599 uses the same timing for 10g SFI. - */ - for (i = 0; i < 5; i++) { - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, - &link_up, false); - if (status != 0) - return status; - - if (link_up) - goto out; - } - } - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) { - speedcnt++; - if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) - highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - - /* Allow module to change analog characteristics (10G->1G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_1GB_FULL, - autoneg, - autoneg_wait_to_complete); - if (status != 0) - return status; - - /* Flap the tx laser if it has not already been done */ - ixgbe_flap_tx_laser(hw); - - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - return status; - - if (link_up) - goto out; - } - - /* - * We didn't get link. Configure back to the highest speed we tried, - * (if there was more than one). We call ourselves back with just the - * single highest speed that the user requested. - */ - if (speedcnt > 1) - status = ixgbe_setup_mac_link_multispeed_fiber(hw, - highest_link_speed, autoneg, autoneg_wait_to_complete); - -out: - /* Set autoneg_advertised value based on input link speed */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - return status; -} - -/** - * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Implements the Intel SmartSpeed algorithm. - **/ -s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status = 0; - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; - s32 i, j; - bool link_up = false; - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - - /* Set autoneg_advertised value based on input link speed */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - if (speed & IXGBE_LINK_SPEED_100_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; - - /* - * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the - * autoneg advertisement if link is unable to be established at the - * highest negotiated rate. This can sometimes happen due to integrity - * issues with the physical media connection. - */ - - /* First, try to get link with full advertisement */ - hw->phy.smart_speed_active = false; - for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, - autoneg_wait_to_complete); - if (status != 0) - goto out; - - /* - * Wait for the controller to acquire link. Per IEEE 802.3ap, - * Section 73.10.2, we may have to wait up to 500ms if KR is - * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per - * Table 9 in the AN MAS. - */ - for (i = 0; i < 5; i++) { - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - goto out; - - if (link_up) - goto out; - } - } - - /* - * We didn't get link. If we advertised KR plus one of KX4/KX - * (or BX4/BX), then disable KR and try again. - */ - if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || - ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) - goto out; - - /* Turn SmartSpeed on to disable KR support */ - hw->phy.smart_speed_active = true; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, - autoneg_wait_to_complete); - if (status != 0) - goto out; - - /* - * Wait for the controller to acquire link. 600ms will allow for - * the AN link_fail_inhibit_timer as well for multiple cycles of - * parallel detect, both 10g and 1g. This allows for the maximum - * connect attempts as defined in the AN MAS table 73-7. - */ - for (i = 0; i < 6; i++) { - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - goto out; - - if (link_up) - goto out; - } - - /* We didn't get link. Turn SmartSpeed back off. */ - hw->phy.smart_speed_active = false; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, - autoneg_wait_to_complete); - -out: - if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) - hw_dbg(hw, "Smartspeed has downgraded the link speed " - "from the maximum advertised\n"); - return status; -} - -/** - * ixgbe_setup_mac_link_82599 - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Set the link speed in the AUTOC register and restarts link. - **/ -s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status = 0; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - u32 start_autoc = autoc; - u32 orig_autoc = 0; - u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; - u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; - u32 links_reg = 0; - u32 i; - ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; - - /* Check to see if speed passed in is supported. */ - status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); - if (status != 0) - goto out; - - speed &= link_capabilities; - - if (speed == IXGBE_LINK_SPEED_UNKNOWN) { - status = IXGBE_ERR_LINK_SETUP; - goto out; - } - - /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ - if (hw->mac.orig_link_settings_stored) - orig_autoc = hw->mac.orig_autoc; - else - orig_autoc = autoc; - - if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { - /* Set KX4/KX/KR support according to speed requested */ - autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) - autoc |= IXGBE_AUTOC_KX4_SUPP; - if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && - (hw->phy.smart_speed_active == false)) - autoc |= IXGBE_AUTOC_KR_SUPP; - } - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - autoc |= IXGBE_AUTOC_KX_SUPP; - } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && - (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || - link_mode == IXGBE_AUTOC_LMS_1G_AN)) { - /* Switch from 1G SFI to 10G SFI if requested */ - if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && - (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { - autoc &= ~IXGBE_AUTOC_LMS_MASK; - autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; - } - } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && - (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { - /* Switch from 10G SFI to 1G SFI if requested */ - if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && - (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { - autoc &= ~IXGBE_AUTOC_LMS_MASK; - if (autoneg) - autoc |= IXGBE_AUTOC_LMS_1G_AN; - else - autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; - } - } - - if (autoc != start_autoc) { - /* Restart link */ - autoc |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); - - /* Only poll for autoneg to complete if specified to do so */ - if (autoneg_wait_to_complete) { - if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { - for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { - links_reg = - IXGBE_READ_REG(hw, IXGBE_LINKS); - if (links_reg & IXGBE_LINKS_KX_AN_COMP) - break; - msleep(100); - } - if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { - status = - IXGBE_ERR_AUTONEG_NOT_COMPLETE; - hw_dbg(hw, "Autoneg did not complete.\n"); - } - } - } - - /* Add delay to filter out noises during initial link setup */ - msleep(50); - } - -out: - return status; -} - -/** - * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true if waiting is needed to complete - * - * Restarts link on PHY and MAC based on settings passed in. - **/ -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status; - - /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, - autoneg_wait_to_complete); - /* Set up MAC */ - ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); - - return status; -} - -/** - * ixgbe_reset_hw_82599 - Perform hardware reset - * @hw: pointer to hardware structure - * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, perform a PHY reset, and perform a link (MAC) - * reset. - **/ -s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) -{ -// ixgbe_link_speed link_speed; - s32 status = 0; -// u32 ctrl, i, autoc, autoc2; -// bool link_up = false; - -#if 0 - /* Call adapter stop to disable tx/rx and clear interrupts */ - status = hw->mac.ops.stop_adapter(hw); - if (status != 0) - goto reset_hw_out; - - /* flush pending Tx transactions */ - ixgbe_clear_tx_pending(hw); - - /* PHY ops must be identified and initialized prior to reset */ - - /* Identify PHY and related function pointers */ - status = hw->phy.ops.init(hw); - - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto reset_hw_out; - - /* Setup SFP module if there is one present. */ - if (hw->phy.sfp_setup_needed) { - status = hw->mac.ops.setup_sfp(hw); - hw->phy.sfp_setup_needed = false; - } - - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto reset_hw_out; - - /* Reset PHY */ - if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) - hw->phy.ops.reset(hw); - -mac_reset_top: - /* - * Issue global reset to the MAC. Needs to be SW reset if link is up. - * If link reset is used when link is up, it might reset the PHY when - * mng is using it. If link is down or the flag to force full link - * reset is set, then perform link reset. - */ - ctrl = IXGBE_CTRL_LNK_RST; - if (!hw->force_full_reset) { - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - if (link_up) - ctrl = IXGBE_CTRL_RST; - } - - ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); - IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); - IXGBE_WRITE_FLUSH(hw); - - /* Poll for reset bit to self-clear indicating reset is complete */ - for (i = 0; i < 10; i++) { - udelay(1); - ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); - if (!(ctrl & IXGBE_CTRL_RST_MASK)) - break; - } - - if (ctrl & IXGBE_CTRL_RST_MASK) { - status = IXGBE_ERR_RESET_FAILED; - hw_dbg(hw, "Reset polling failed to complete.\n"); - } - - msleep(50); - - /* - * Double resets are required for recovery from certain error - * conditions. Between resets, it is necessary to stall to allow time - * for any pending HW events to complete. - */ - if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { - hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; - goto mac_reset_top; - } - - /* - * Store the original AUTOC/AUTOC2 values if they have not been - * stored off yet. Otherwise restore the stored original - * values since the reset operation sets back to defaults. - */ - autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - if (hw->mac.orig_link_settings_stored == false) { - hw->mac.orig_autoc = autoc; - hw->mac.orig_autoc2 = autoc2; - hw->mac.orig_link_settings_stored = true; - } else { - if (autoc != hw->mac.orig_autoc) - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | - IXGBE_AUTOC_AN_RESTART)); - - if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != - (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { - autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; - autoc2 |= (hw->mac.orig_autoc2 & - IXGBE_AUTOC2_UPPER_MASK); - IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); - } - } -#endif - - /* Store the permanent mac address */ - hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); - - /* - * Store MAC address from RAR0, clear receive address registers, and - * clear the multicast table. Also reset num_rar_entries to 128, - * since we modify this value when programming the SAN MAC address. - */ - hw->mac.num_rar_entries = 128; - hw->mac.ops.init_rx_addrs(hw); - - /* Store the permanent SAN mac address */ - hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); - - /* Add the SAN MAC address to the RAR only if it's a valid address */ - if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { - hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, - hw->mac.san_addr, 0, IXGBE_RAH_AV); - - /* Save the SAN MAC RAR index */ - hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; - - /* Reserve the last RAR for the SAN MAC address */ - hw->mac.num_rar_entries--; - } - - /* Store the alternative WWNN/WWPN prefix */ - hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, - &hw->mac.wwpn_prefix); - -//reset_hw_out: - return status; -} - -/** - * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) -{ - int i; - u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); - fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; - - /* - * Before starting reinitialization process, - * FDIRCMD.CMD must be zero. - */ - for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { - if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & - IXGBE_FDIRCMD_CMD_MASK)) - break; - udelay(10); - } - if (i >= IXGBE_FDIRCMD_CMD_POLL) { - hw_dbg(hw, "Flow Director previous command isn't complete, " - "aborting table re-initialization.\n"); - return IXGBE_ERR_FDIR_REINIT_FAILED; - } - - IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); - IXGBE_WRITE_FLUSH(hw); - /* - * 82599 adapters flow director init flow cannot be restarted, - * Workaround 82599 silicon errata by performing the following steps - * before re-writing the FDIRCTRL control register with the same value. - * - write 1 to bit 8 of FDIRCMD register & - * - write 0 to bit 8 of FDIRCMD register - */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | - IXGBE_FDIRCMD_CLEARHT)); - IXGBE_WRITE_FLUSH(hw); - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & - ~IXGBE_FDIRCMD_CLEARHT)); - IXGBE_WRITE_FLUSH(hw); - /* - * Clear FDIR Hash register to clear any leftover hashes - * waiting to be programmed. - */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); - IXGBE_WRITE_FLUSH(hw); - - IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); - IXGBE_WRITE_FLUSH(hw); - - /* Poll init-done after we write FDIRCTRL register */ - for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { - if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & - IXGBE_FDIRCTRL_INIT_DONE) - break; - udelay(10); - } - if (i >= IXGBE_FDIR_INIT_DONE_POLL) { - hw_dbg(hw, "Flow Director Signature poll time exceeded!\n"); - return IXGBE_ERR_FDIR_REINIT_FAILED; - } - - /* Clear FDIR statistics registers (read to clear) */ - IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); - IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); - IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); - IXGBE_READ_REG(hw, IXGBE_FDIRMISS); - IXGBE_READ_REG(hw, IXGBE_FDIRLEN); - - return 0; -} - -/** - * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register - **/ -static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) -{ - int i; - - /* Prime the keys for hashing */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY); - IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY); - - /* - * Poll init-done after we write the register. Estimated times: - * 10G: PBALLOC = 11b, timing is 60us - * 1G: PBALLOC = 11b, timing is 600us - * 100M: PBALLOC = 11b, timing is 6ms - * - * Multiple these timings by 4 if under full Rx load - * - * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for - * 1 msec per poll time. If we're at line rate and drop to 100M, then - * this might not finish in our poll time, but we can live with that - * for now. - */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); - IXGBE_WRITE_FLUSH(hw); - for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { - if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & - IXGBE_FDIRCTRL_INIT_DONE) - break; - msleep(1); - } - - if (i >= IXGBE_FDIR_INIT_DONE_POLL) - hw_dbg(hw, "Flow Director poll time exceeded!\n"); -} - -/** - * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially - * contains just the value of the Rx packet buffer allocation - **/ -s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) -{ - /* - * Continue setup of fdirctrl register bits: - * Move the flexible bytes to use the ethertype - shift 6 words - * Set the maximum length per hash bucket to 0xA filters - * Send interrupt when 64 filters are left - */ - fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | - (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | - (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); - - /* write hashes and fdirctrl register, poll for completion */ - ixgbe_fdir_enable_82599(hw, fdirctrl); - - return 0; -} - -/** - * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially - * contains just the value of the Rx packet buffer allocation - **/ -s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) -{ - /* - * Continue setup of fdirctrl register bits: - * Turn perfect match filtering on - * Report hash in RSS field of Rx wb descriptor - * Initialize the drop queue - * Move the flexible bytes to use the ethertype - shift 6 words - * Set the maximum length per hash bucket to 0xA filters - * Send interrupt when 64 (0x4 * 16) filters are left - */ - fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | - IXGBE_FDIRCTRL_REPORT_STATUS | - (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | - (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | - (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | - (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); - - /* write hashes and fdirctrl register, poll for completion */ - ixgbe_fdir_enable_82599(hw, fdirctrl); - - return 0; -} - -/* - * These defines allow us to quickly generate all of the necessary instructions - * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION - * for values 0 through 15 - */ -#define IXGBE_ATR_COMMON_HASH_KEY \ - (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY) -#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \ -do { \ - u32 n = (_n); \ - if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \ - common_hash ^= lo_hash_dword >> n; \ - else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ - bucket_hash ^= lo_hash_dword >> n; \ - else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \ - sig_hash ^= lo_hash_dword << (16 - n); \ - if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \ - common_hash ^= hi_hash_dword >> n; \ - else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ - bucket_hash ^= hi_hash_dword >> n; \ - else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ - sig_hash ^= hi_hash_dword << (16 - n); \ -} while (0); - -/** - * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash - * @stream: input bitstream to compute the hash on - * - * This function is almost identical to the function above but contains - * several optomizations such as unwinding all of the loops, letting the - * compiler work out all of the conditional ifs since the keys are static - * defines, and computing two keys at once since the hashed dword stream - * will be the same for both keys. - **/ -u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, - union ixgbe_atr_hash_dword common) -{ - u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; - u32 sig_hash = 0, bucket_hash = 0, common_hash = 0; - - /* record the flow_vm_vlan bits as they are a key part to the hash */ - flow_vm_vlan = IXGBE_NTOHL(input.dword); - - /* generate common hash dword */ - hi_hash_dword = IXGBE_NTOHL(common.dword); - - /* low dword is word swapped version of common */ - lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); - - /* apply flow ID/VM pool/VLAN ID bits to hash words */ - hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); - - /* Process bits 0 and 16 */ - IXGBE_COMPUTE_SIG_HASH_ITERATION(0); - - /* - * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to - * delay this because bit 0 of the stream should not be processed - * so we do not add the vlan until after bit 0 was processed - */ - lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); - - /* Process remaining 30 bit of the key */ - IXGBE_COMPUTE_SIG_HASH_ITERATION(1); - IXGBE_COMPUTE_SIG_HASH_ITERATION(2); - IXGBE_COMPUTE_SIG_HASH_ITERATION(3); - IXGBE_COMPUTE_SIG_HASH_ITERATION(4); - IXGBE_COMPUTE_SIG_HASH_ITERATION(5); - IXGBE_COMPUTE_SIG_HASH_ITERATION(6); - IXGBE_COMPUTE_SIG_HASH_ITERATION(7); - IXGBE_COMPUTE_SIG_HASH_ITERATION(8); - IXGBE_COMPUTE_SIG_HASH_ITERATION(9); - IXGBE_COMPUTE_SIG_HASH_ITERATION(10); - IXGBE_COMPUTE_SIG_HASH_ITERATION(11); - IXGBE_COMPUTE_SIG_HASH_ITERATION(12); - IXGBE_COMPUTE_SIG_HASH_ITERATION(13); - IXGBE_COMPUTE_SIG_HASH_ITERATION(14); - IXGBE_COMPUTE_SIG_HASH_ITERATION(15); - - /* combine common_hash result with signature and bucket hashes */ - bucket_hash ^= common_hash; - bucket_hash &= IXGBE_ATR_HASH_MASK; - - sig_hash ^= common_hash << 16; - sig_hash &= IXGBE_ATR_HASH_MASK << 16; - - /* return completed signature hash */ - return sig_hash ^ bucket_hash; -} - -/** - * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter - * @hw: pointer to hardware structure - * @input: unique input dword - * @common: compressed common input dword - * @queue: queue index to direct traffic to - **/ -s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_hash_dword input, - union ixgbe_atr_hash_dword common, - u8 queue) -{ - u64 fdirhashcmd; - u32 fdircmd; - - /* - * Get the flow_type in order to program FDIRCMD properly - * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 - */ - switch (input.formatted.flow_type) { - case IXGBE_ATR_FLOW_TYPE_TCPV4: - case IXGBE_ATR_FLOW_TYPE_UDPV4: - case IXGBE_ATR_FLOW_TYPE_SCTPV4: - case IXGBE_ATR_FLOW_TYPE_TCPV6: - case IXGBE_ATR_FLOW_TYPE_UDPV6: - case IXGBE_ATR_FLOW_TYPE_SCTPV6: - break; - default: - hw_dbg(hw, " Error on flow type input\n"); - return IXGBE_ERR_CONFIG; - } - - /* configure FDIRCMD register */ - fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | - IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; - fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; - fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; - - /* - * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits - * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. - */ - fdirhashcmd = (u64)fdircmd << 32; - fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common); - IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); - - hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd); - - return 0; -} - -#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \ -do { \ - u32 n = (_n); \ - if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ - bucket_hash ^= lo_hash_dword >> n; \ - if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ - bucket_hash ^= hi_hash_dword >> n; \ -} while (0); - -/** - * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash - * @atr_input: input bitstream to compute the hash on - * @input_mask: mask for the input bitstream - * - * This function serves two main purposes. First it applys the input_mask - * to the atr_input resulting in a cleaned up atr_input data stream. - * Secondly it computes the hash and stores it in the bkt_hash field at - * the end of the input byte stream. This way it will be available for - * future use without needing to recompute the hash. - **/ -void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, - union ixgbe_atr_input *input_mask) -{ - - u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; - u32 bucket_hash = 0; - - /* Apply masks to input data */ - input->dword_stream[0] &= input_mask->dword_stream[0]; - input->dword_stream[1] &= input_mask->dword_stream[1]; - input->dword_stream[2] &= input_mask->dword_stream[2]; - input->dword_stream[3] &= input_mask->dword_stream[3]; - input->dword_stream[4] &= input_mask->dword_stream[4]; - input->dword_stream[5] &= input_mask->dword_stream[5]; - input->dword_stream[6] &= input_mask->dword_stream[6]; - input->dword_stream[7] &= input_mask->dword_stream[7]; - input->dword_stream[8] &= input_mask->dword_stream[8]; - input->dword_stream[9] &= input_mask->dword_stream[9]; - input->dword_stream[10] &= input_mask->dword_stream[10]; - - /* record the flow_vm_vlan bits as they are a key part to the hash */ - flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]); - - /* generate common hash dword */ - hi_hash_dword = IXGBE_NTOHL(input->dword_stream[1] ^ - input->dword_stream[2] ^ - input->dword_stream[3] ^ - input->dword_stream[4] ^ - input->dword_stream[5] ^ - input->dword_stream[6] ^ - input->dword_stream[7] ^ - input->dword_stream[8] ^ - input->dword_stream[9] ^ - input->dword_stream[10]); - - /* low dword is word swapped version of common */ - lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); - - /* apply flow ID/VM pool/VLAN ID bits to hash words */ - hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); - - /* Process bits 0 and 16 */ - IXGBE_COMPUTE_BKT_HASH_ITERATION(0); - - /* - * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to - * delay this because bit 0 of the stream should not be processed - * so we do not add the vlan until after bit 0 was processed - */ - lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); - - /* Process remaining 30 bit of the key */ - IXGBE_COMPUTE_BKT_HASH_ITERATION(1); - IXGBE_COMPUTE_BKT_HASH_ITERATION(2); - IXGBE_COMPUTE_BKT_HASH_ITERATION(3); - IXGBE_COMPUTE_BKT_HASH_ITERATION(4); - IXGBE_COMPUTE_BKT_HASH_ITERATION(5); - IXGBE_COMPUTE_BKT_HASH_ITERATION(6); - IXGBE_COMPUTE_BKT_HASH_ITERATION(7); - IXGBE_COMPUTE_BKT_HASH_ITERATION(8); - IXGBE_COMPUTE_BKT_HASH_ITERATION(9); - IXGBE_COMPUTE_BKT_HASH_ITERATION(10); - IXGBE_COMPUTE_BKT_HASH_ITERATION(11); - IXGBE_COMPUTE_BKT_HASH_ITERATION(12); - IXGBE_COMPUTE_BKT_HASH_ITERATION(13); - IXGBE_COMPUTE_BKT_HASH_ITERATION(14); - IXGBE_COMPUTE_BKT_HASH_ITERATION(15); - - /* - * Limit hash to 13 bits since max bucket count is 8K. - * Store result at the end of the input stream. - */ - input->formatted.bkt_hash = bucket_hash & 0x1FFF; -} - -/** - * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks - * @input_mask: mask to be bit swapped - * - * The source and destination port masks for flow director are bit swapped - * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to - * generate a correctly swapped value we need to bit swap the mask and that - * is what is accomplished by this function. - **/ -static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) -{ - u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port); - mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; - mask |= IXGBE_NTOHS(input_mask->formatted.src_port); - mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); - mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2); - mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4); - return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8); -} - -/* - * These two macros are meant to address the fact that we have registers - * that are either all or in part big-endian. As a result on big-endian - * systems we will end up byte swapping the value to little-endian before - * it is byte swapped again and written to the hardware in the original - * big-endian format. - */ -#define IXGBE_STORE_AS_BE32(_value) \ - (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \ - (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24)) - -#define IXGBE_WRITE_REG_BE32(a, reg, value) \ - IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(IXGBE_NTOHL(value))) - -#define IXGBE_STORE_AS_BE16(_value) \ - IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8)) - -s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input_mask) -{ - /* mask IPv6 since it is currently not supported */ - u32 fdirm = IXGBE_FDIRM_DIPv6; - u32 fdirtcpm; - - /* - * Program the relevant mask registers. If src/dst_port or src/dst_addr - * are zero, then assume a full mask for that field. Also assume that - * a VLAN of 0 is unspecified, so mask that out as well. L4type - * cannot be masked out in this implementation. - * - * This also assumes IPv4 only. IPv6 masking isn't supported at this - * point in time. - */ - - /* verify bucket hash is cleared on hash generation */ - if (input_mask->formatted.bkt_hash) - hw_dbg(hw, " bucket hash should always be 0 in mask\n"); - - /* Program FDIRM and verify partial masks */ - switch (input_mask->formatted.vm_pool & 0x7F) { - case 0x0: - fdirm |= IXGBE_FDIRM_POOL; - case 0x7F: - break; - default: - hw_dbg(hw, " Error on vm pool mask\n"); - return IXGBE_ERR_CONFIG; - } - - switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) { - case 0x0: - fdirm |= IXGBE_FDIRM_L4P; - if (input_mask->formatted.dst_port || - input_mask->formatted.src_port) { - hw_dbg(hw, " Error on src/dst port mask\n"); - return IXGBE_ERR_CONFIG; - } - case IXGBE_ATR_L4TYPE_MASK: - break; - default: - hw_dbg(hw, " Error on flow type mask\n"); - return IXGBE_ERR_CONFIG; - } - - switch (IXGBE_NTOHS(input_mask->formatted.vlan_id) & 0xEFFF) { - case 0x0000: - /* mask VLAN ID, fall through to mask VLAN priority */ - fdirm |= IXGBE_FDIRM_VLANID; - case 0x0FFF: - /* mask VLAN priority */ - fdirm |= IXGBE_FDIRM_VLANP; - break; - case 0xE000: - /* mask VLAN ID only, fall through */ - fdirm |= IXGBE_FDIRM_VLANID; - case 0xEFFF: - /* no VLAN fields masked */ - break; - default: - hw_dbg(hw, " Error on VLAN mask\n"); - return IXGBE_ERR_CONFIG; - } - - switch (input_mask->formatted.flex_bytes & 0xFFFF) { - case 0x0000: - /* Mask Flex Bytes, fall through */ - fdirm |= IXGBE_FDIRM_FLEX; - case 0xFFFF: - break; - default: - hw_dbg(hw, " Error on flexible byte mask\n"); - return IXGBE_ERR_CONFIG; - } - - /* Now mask VM pool and destination IPv6 - bits 5 and 2 */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm); - - /* store the TCP/UDP port masks, bit reversed from port layout */ - fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask); - - /* write both the same so that UDP and TCP use the same mask */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); - IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); - - /* store source and destination IP masks (big-enian) */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, - ~input_mask->formatted.src_ip[0]); - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, - ~input_mask->formatted.dst_ip[0]); - - return 0; -} - -s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - u16 soft_id, u8 queue) -{ - u32 fdirport, fdirvlan, fdirhash, fdircmd; - - /* currently IPv6 is not supported, must be programmed with 0 */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), - input->formatted.src_ip[0]); - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), - input->formatted.src_ip[1]); - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), - input->formatted.src_ip[2]); - - /* record the source address (big-endian) */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]); - - /* record the first 32 bits of the destination address (big-endian) */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]); - - /* record source and destination port (little-endian)*/ - fdirport = IXGBE_NTOHS(input->formatted.dst_port); - fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT; - fdirport |= IXGBE_NTOHS(input->formatted.src_port); - IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport); - - /* record vlan (little-endian) and flex_bytes(big-endian) */ - fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes); - fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT; - fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id); - IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan); - - /* configure FDIRHASH register */ - fdirhash = input->formatted.bkt_hash; - fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); - - /* - * flush all previous writes to make certain registers are - * programmed prior to issuing the command - */ - IXGBE_WRITE_FLUSH(hw); - - /* configure FDIRCMD register */ - fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | - IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; - if (queue == IXGBE_FDIR_DROP_QUEUE) - fdircmd |= IXGBE_FDIRCMD_DROP; - fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; - fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; - fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; - - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); - - return 0; -} - -s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - u16 soft_id) -{ - u32 fdirhash; - u32 fdircmd = 0; - u32 retry_count; - s32 err = 0; - - /* configure FDIRHASH register */ - fdirhash = input->formatted.bkt_hash; - fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); - - /* flush hash to HW */ - IXGBE_WRITE_FLUSH(hw); - - /* Query if filter is present */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); - - for (retry_count = 10; retry_count; retry_count--) { - /* allow 10us for query to process */ - udelay(10); - /* verify query completed successfully */ - fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); - if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK)) - break; - } - - if (!retry_count) - err = IXGBE_ERR_FDIR_REINIT_FAILED; - - /* if filter exists in hardware then remove it */ - if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); - IXGBE_WRITE_FLUSH(hw); - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - IXGBE_FDIRCMD_CMD_REMOVE_FLOW); - } - - return err; -} - -/** - * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter - * @hw: pointer to hardware structure - * @input: input bitstream - * @input_mask: mask for the input bitstream - * @soft_id: software index for the filters - * @queue: queue index to direct traffic to - * - * Note that the caller to this function must lock before calling, since the - * hardware writes must be protected from one another. - **/ -s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - union ixgbe_atr_input *input_mask, - u16 soft_id, u8 queue) -{ - s32 err = IXGBE_ERR_CONFIG; - - /* - * Check flow_type formatting, and bail out before we touch the hardware - * if there's a configuration issue - */ - switch (input->formatted.flow_type) { - case IXGBE_ATR_FLOW_TYPE_IPV4: - input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK; - if (input->formatted.dst_port || input->formatted.src_port) { - hw_dbg(hw, " Error on src/dst port\n"); - return IXGBE_ERR_CONFIG; - } - break; - case IXGBE_ATR_FLOW_TYPE_SCTPV4: - if (input->formatted.dst_port || input->formatted.src_port) { - hw_dbg(hw, " Error on src/dst port\n"); - return IXGBE_ERR_CONFIG; - } - case IXGBE_ATR_FLOW_TYPE_TCPV4: - case IXGBE_ATR_FLOW_TYPE_UDPV4: - input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | - IXGBE_ATR_L4TYPE_MASK; - break; - default: - hw_dbg(hw, " Error on flow type input\n"); - return err; - } - - /* program input mask into the HW */ - err = ixgbe_fdir_set_input_mask_82599(hw, input_mask); - if (err) - return err; - - /* apply mask and compute/store hash */ - ixgbe_atr_compute_perfect_hash_82599(input, input_mask); - - /* program filters to filter memory */ - return ixgbe_fdir_write_perfect_filter_82599(hw, input, - soft_id, queue); -} - -/** - * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value - * - * Performs read operation to Omer analog register specified. - **/ -s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) -{ - u32 core_ctl; - - IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | - (reg << 8)); - IXGBE_WRITE_FLUSH(hw); - udelay(10); - core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); - *val = (u8)core_ctl; - - return 0; -} - -/** - * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: atlas register to write - * @val: value to write - * - * Performs write operation to Omer analog register specified. - **/ -s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) -{ - u32 core_ctl; - - core_ctl = (reg << 8) | val; - IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); - IXGBE_WRITE_FLUSH(hw); - udelay(10); - - return 0; -} - -/** - * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure - * - * Starts the hardware using the generic start_hw function - * and the generation start_hw function. - * Then performs revision-specific operations, if any. - **/ -s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - - ret_val = ixgbe_start_hw_generic(hw); - if (ret_val != 0) - goto out; - - ret_val = ixgbe_start_hw_gen2(hw); - if (ret_val != 0) - goto out; - - /* We need to run link autotry after the driver loads */ - hw->mac.autotry_restart = true; - - if (ret_val == 0) - ret_val = ixgbe_verify_fw_version_82599(hw); -out: - return ret_val; -} - -/** - * ixgbe_identify_phy_82599 - Get physical layer module - * @hw: pointer to hardware structure - * - * Determines the physical layer module found on the current adapter. - * If PHY already detected, maintains current PHY type in hw struct, - * otherwise executes the PHY detection routine. - **/ -s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; - - /* Detect PHY if not unknown - returns success if already detected. */ - status = ixgbe_identify_phy_generic(hw); - if (status != 0) { - /* 82599 10GBASE-T requires an external PHY */ - if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) - goto out; - else - status = ixgbe_identify_module_generic(hw); - } - - /* Set PHY type none if no PHY detected */ - if (hw->phy.type == ixgbe_phy_unknown) { - hw->phy.type = ixgbe_phy_none; - status = 0; - } - - /* Return error if SFP module has been detected but is not supported */ - if (hw->phy.type == ixgbe_phy_sfp_unsupported) - status = IXGBE_ERR_SFP_NOT_SUPPORTED; - -out: - return status; -} - -/** - * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) -{ - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; - u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; - u16 ext_ability = 0; - u8 comp_codes_10g = 0; - u8 comp_codes_1g = 0; - - hw->phy.ops.identify(hw); - - switch (hw->phy.type) { - case ixgbe_phy_tn: - case ixgbe_phy_cu_unknown: - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); - if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; - goto out; - default: - break; - } - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_AN: - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | - IXGBE_PHYSICAL_LAYER_1000BASE_BX; - goto out; - } else - /* SFI mode so read SFP module */ - goto sfp_check; - break; - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; - else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; - goto out; - break; - case IXGBE_AUTOC_LMS_10G_SERIAL: - if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; - goto out; - } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) - goto sfp_check; - break; - case IXGBE_AUTOC_LMS_KX4_KX_KR: - case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: - if (autoc & IXGBE_AUTOC_KX_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - if (autoc & IXGBE_AUTOC_KR_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; - goto out; - break; - default: - goto out; - break; - } - -sfp_check: - /* SFP check must be done last since DA modules are sometimes used to - * test KR mode - we need to id KR mode correctly before SFP module. - * Call identify_sfp because the pluggable module may have changed */ - hw->phy.ops.identify_sfp(hw); - if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) - goto out; - - switch (hw->phy.type) { - case ixgbe_phy_sfp_passive_tyco: - case ixgbe_phy_sfp_passive_unknown: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case ixgbe_phy_sfp_ftl_active: - case ixgbe_phy_sfp_active_unknown: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; - break; - case ixgbe_phy_sfp_avago: - case ixgbe_phy_sfp_ftl: - case ixgbe_phy_sfp_intel: - case ixgbe_phy_sfp_unknown: - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); - if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; - else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX; - break; - default: - break; - } - -out: - return physical_layer; -} - -/** - * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL - * - * Enables the Rx DMA unit for 82599 - **/ -s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) -{ - - /* - * Workaround for 82599 silicon errata when enabling the Rx datapath. - * If traffic is incoming before we enable the Rx unit, it could hang - * the Rx DMA unit. Therefore, make sure the security engine is - * completely disabled prior to enabling the Rx unit. - */ - - hw->mac.ops.disable_sec_rx_path(hw); - - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); - - hw->mac.ops.enable_sec_rx_path(hw); - - return 0; -} - -/** - * ixgbe_verify_fw_version_82599 - verify fw version for 82599 - * @hw: pointer to hardware structure - * - * Verifies that installed the firmware version is 0.6 or higher - * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. - * - * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or - * if the FW version is not supported. - **/ -static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_EEPROM_VERSION; - u16 fw_offset, fw_ptp_cfg_offset; - u16 fw_version = 0; - - /* firmware check is only necessary for SFI devices */ - if (hw->phy.media_type != ixgbe_media_type_fiber) { - status = 0; - goto fw_version_out; - } - - /* get the offset to the Firmware Module block */ - hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); - - if ((fw_offset == 0) || (fw_offset == 0xFFFF)) - goto fw_version_out; - - /* get the offset to the Pass Through Patch Configuration block */ - hw->eeprom.ops.read(hw, (fw_offset + - IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), - &fw_ptp_cfg_offset); - - if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) - goto fw_version_out; - - /* get the firmware version */ - hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + - IXGBE_FW_PATCH_VERSION_4), &fw_version); - - if (fw_version > 0x5) - status = 0; - -fw_version_out: - return status; -} - -/** - * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. - * @hw: pointer to hardware structure - * - * Returns true if the LESM FW module is present and enabled. Otherwise - * returns false. Smart Speed must be disabled if LESM FW module is enabled. - **/ -bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) -{ - bool lesm_enabled = false; - u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; - s32 status; - - /* get the offset to the Firmware Module block */ - status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); - - if ((status != 0) || - (fw_offset == 0) || (fw_offset == 0xFFFF)) - goto out; - - /* get the offset to the LESM Parameters block */ - status = hw->eeprom.ops.read(hw, (fw_offset + - IXGBE_FW_LESM_PARAMETERS_PTR), - &fw_lesm_param_offset); - - if ((status != 0) || - (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF)) - goto out; - - /* get the lesm state word */ - status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset + - IXGBE_FW_LESM_STATE_1), - &fw_lesm_state); - - if ((status == 0) && - (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED)) - lesm_enabled = true; - -out: - return lesm_enabled; -} - -/** - * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using - * fastest available method - * - * @hw: pointer to hardware structure - * @offset: offset of word in EEPROM to read - * @words: number of words - * @data: word(s) read from the EEPROM - * - * Retrieves 16 bit word(s) read from EEPROM - **/ -static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - s32 ret_val = IXGBE_ERR_CONFIG; - - /* - * If EEPROM is detected and can be addressed using 14 bits, - * use EERD otherwise use bit bang - */ - if ((eeprom->type == ixgbe_eeprom_spi) && - (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)) - ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words, - data); - else - ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, - words, - data); - - return ret_val; -} - -/** - * ixgbe_read_eeprom_82599 - Read EEPROM word using - * fastest available method - * - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM - **/ -static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, - u16 offset, u16 *data) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - s32 ret_val = IXGBE_ERR_CONFIG; - - /* - * If EEPROM is detected and can be addressed using 14 bits, - * use EERD otherwise use bit bang - */ - if ((eeprom->type == ixgbe_eeprom_spi) && - (offset <= IXGBE_EERD_MAX_ADDR)) - ret_val = ixgbe_read_eerd_generic(hw, offset, data); - else - ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data); - - return ret_val; -} - -/** - * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface at - * a specified device address. - **/ -static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) -{ - u32 esdp; - s32 status; - s32 timeout = 200; - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Acquire I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp |= IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - - while (timeout) { - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - if (esdp & IXGBE_ESDP_SDP1) - break; - - msleep(5); - timeout--; - } - - if (!timeout) { - hw_dbg(hw, "Driver can't access resource," - " acquiring I2C bus timeout.\n"); - status = IXGBE_ERR_I2C; - goto release_i2c_access; - } - } - - status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); - -release_i2c_access: - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Release I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp &= ~IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - } - - return status; -} - -/** - * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface at - * a specified device address. - **/ -static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) -{ - u32 esdp; - s32 status; - s32 timeout = 200; - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Acquire I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp |= IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - - while (timeout) { - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - if (esdp & IXGBE_ESDP_SDP1) - break; - - msleep(5); - timeout--; - } - - if (!timeout) { - hw_dbg(hw, "Driver can't access resource," - " acquiring I2C bus timeout.\n"); - status = IXGBE_ERR_I2C; - goto release_i2c_access; - } - } - - status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); - -release_i2c_access: - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Release I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp &= ~IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - } - - return status; -} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h deleted file mode 100644 index 0305ed7325..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_82599_H_ -#define _IXGBE_82599_H_ - -s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, bool *autoneg); -enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw); -void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); -void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); -void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); -s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete); -s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete); -s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, - bool autoneg_wait_to_complete); -s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); -s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw); -void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw); -s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw); -s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); -s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); -s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw); -s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw); -s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw); -u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); -s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval); -bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); -#endif /* _IXGBE_82599_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c deleted file mode 100644 index 1be4c64ff1..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c +++ /dev/null @@ -1,1142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_api.h" -#include "ixgbe_common.h" - -/** - * ixgbe_init_shared_code - Initialize the shared code - * @hw: pointer to hardware structure - * - * This will assign function pointers and assign the MAC type and PHY code. - * Does not touch the hardware. This function must be called prior to any - * other function in the shared code. The ixgbe_hw structure should be - * memset to 0 prior to calling this function. The following fields in - * hw structure should be filled in prior to calling this function: - * hw_addr, back, device_id, vendor_id, subsystem_device_id, - * subsystem_vendor_id, and revision_id - **/ -s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) -{ - s32 status; - - /* - * Set the mac type - */ - ixgbe_set_mac_type(hw); - - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - status = ixgbe_init_ops_82598(hw); - break; - case ixgbe_mac_82599EB: - status = ixgbe_init_ops_82599(hw); - break; - case ixgbe_mac_X540: - status = ixgbe_init_ops_X540(hw); - break; - default: - status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; - break; - } - - return status; -} - -/** - * ixgbe_set_mac_type - Sets MAC type - * @hw: pointer to the HW structure - * - * This function sets the mac type of the adapter based on the - * vendor ID and device ID stored in the hw structure. - **/ -s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - - if (hw->vendor_id == IXGBE_INTEL_VENDOR_ID) { - switch (hw->device_id) { - case IXGBE_DEV_ID_82598: - case IXGBE_DEV_ID_82598_BX: - case IXGBE_DEV_ID_82598AF_SINGLE_PORT: - case IXGBE_DEV_ID_82598AF_DUAL_PORT: - case IXGBE_DEV_ID_82598AT: - case IXGBE_DEV_ID_82598AT2: - case IXGBE_DEV_ID_82598EB_CX4: - case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: - case IXGBE_DEV_ID_82598_DA_DUAL_PORT: - case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: - case IXGBE_DEV_ID_82598EB_XF_LR: - case IXGBE_DEV_ID_82598EB_SFP_LOM: - hw->mac.type = ixgbe_mac_82598EB; - break; - case IXGBE_DEV_ID_82599_KX4: - case IXGBE_DEV_ID_82599_KX4_MEZZ: - case IXGBE_DEV_ID_82599_XAUI_LOM: - case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: - case IXGBE_DEV_ID_82599_KR: - case IXGBE_DEV_ID_82599_SFP: - case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: - case IXGBE_DEV_ID_82599_SFP_FCOE: - case IXGBE_DEV_ID_82599_SFP_EM: - case IXGBE_DEV_ID_82599_SFP_SF2: - case IXGBE_DEV_ID_82599_QSFP_SF_QP: - case IXGBE_DEV_ID_82599EN_SFP: - case IXGBE_DEV_ID_82599_CX4: - case IXGBE_DEV_ID_82599_LS: - case IXGBE_DEV_ID_82599_T3_LOM: - hw->mac.type = ixgbe_mac_82599EB; - break; - case IXGBE_DEV_ID_X540T: - hw->mac.type = ixgbe_mac_X540; - break; - default: - ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; - break; - } - } else { - ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; - } - - hw_dbg(hw, "ixgbe_set_mac_type found mac: %d, returns: %d\n", - hw->mac.type, ret_val); - return ret_val; -} - -/** - * ixgbe_init_hw - Initialize the hardware - * @hw: pointer to hardware structure - * - * Initialize the hardware by resetting and then starting the hardware - **/ -s32 ixgbe_init_hw(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_reset_hw - Performs a hardware reset - * @hw: pointer to hardware structure - * - * Resets the hardware by resetting the transmit and receive units, masks and - * clears all interrupts, performs a PHY reset, and performs a MAC reset - **/ -s32 ixgbe_reset_hw(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_start_hw - Prepares hardware for Rx/Tx - * @hw: pointer to hardware structure - * - * Starts the hardware by filling the bus info structure and media type, - * clears all on chip counters, initializes receive address registers, - * multicast table, VLAN filter table, calls routine to setup link and - * flow control settings, and leaves transmit and receive units disabled - * and uninitialized. - **/ -s32 ixgbe_start_hw(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_hw_cntrs - Clear hardware counters - * @hw: pointer to hardware structure - * - * Clears all hardware statistics counters by reading them from the hardware - * Statistics counters are clear on read. - **/ -s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_media_type - Get media type - * @hw: pointer to hardware structure - * - * Returns the media type (fiber, copper, backplane) - **/ -enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw), - ixgbe_media_type_unknown); -} - -/** - * ixgbe_get_mac_addr - Get MAC address - * @hw: pointer to hardware structure - * @mac_addr: Adapter MAC address - * - * Reads the adapter's MAC address from the first Receive Address Register - * (RAR0) A reset of the adapter must have been performed prior to calling - * this function in order for the MAC address to have been loaded from the - * EEPROM into RAR0 - **/ -s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr, - (hw, mac_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_san_mac_addr - Get SAN MAC address - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Reads the SAN MAC address from the EEPROM, if it's available. This is - * per-port, so set_lan_id() must be called before reading the addresses. - **/ -s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr, - (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_san_mac_addr - Write a SAN MAC address - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Writes A SAN MAC address to the EEPROM. - **/ -s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr, - (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_device_caps - Get additional device capabilities - * @hw: pointer to hardware structure - * @device_caps: the EEPROM word for device capabilities - * - * Reads the extra device capabilities from the EEPROM - **/ -s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_device_caps, - (hw, device_caps), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM - * @hw: pointer to hardware structure - * @wwnn_prefix: the alternative WWNN prefix - * @wwpn_prefix: the alternative WWPN prefix - * - * This function will read the EEPROM from the alternative SAN MAC address - * block to check the support for the alternative WWNN/WWPN prefix support. - **/ -s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix, - (hw, wwnn_prefix, wwpn_prefix), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM - * @hw: pointer to hardware structure - * @bs: the fcoe boot status - * - * This function will read the FCOE boot status from the iSCSI FCOE block - **/ -s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status, - (hw, bs), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_bus_info - Set PCI bus info - * @hw: pointer to hardware structure - * - * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure - **/ -s32 ixgbe_get_bus_info(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_num_of_tx_queues - Get Tx queues - * @hw: pointer to hardware structure - * - * Returns the number of transmit queues for the given adapter. - **/ -u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw) -{ - return hw->mac.max_tx_queues; -} - -/** - * ixgbe_get_num_of_rx_queues - Get Rx queues - * @hw: pointer to hardware structure - * - * Returns the number of receive queues for the given adapter. - **/ -u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw) -{ - return hw->mac.max_rx_queues; -} - -/** - * ixgbe_stop_adapter - Disable Rx/Tx units - * @hw: pointer to hardware structure - * - * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, - * disables transmit and receive units. The adapter_stopped flag is used by - * the shared code and drivers to determine if the adapter is in a stopped - * state and should not touch the hardware. - **/ -s32 ixgbe_stop_adapter(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_pba_string - Reads part number string from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number string from the EEPROM - * @pba_num_size: part number string buffer length - * - * Reads the part number string from the EEPROM. - **/ -s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) -{ - return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size); -} - -/** - * ixgbe_identify_phy - Get PHY type - * @hw: pointer to hardware structure - * - * Determines the physical layer module found on the current adapter. - **/ -s32 ixgbe_identify_phy(struct ixgbe_hw *hw) -{ - s32 status = 0; - - if (hw->phy.type == ixgbe_phy_unknown) { - status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw), - IXGBE_NOT_IMPLEMENTED); - } - - return status; -} - -/** - * ixgbe_reset_phy - Perform a PHY reset - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reset_phy(struct ixgbe_hw *hw) -{ - s32 status = 0; - - if (hw->phy.type == ixgbe_phy_unknown) { - if (ixgbe_identify_phy(hw) != 0) - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw), - IXGBE_NOT_IMPLEMENTED); - } - return status; -} - -/** - * ixgbe_get_phy_firmware_version - - * @hw: pointer to hardware structure - * @firmware_version: pointer to firmware version - **/ -s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version) -{ - s32 status = 0; - - status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version, - (hw, firmware_version), - IXGBE_NOT_IMPLEMENTED); - return status; -} - -/** - * ixgbe_read_phy_reg - Read PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @phy_data: Pointer to read data from PHY register - * - * Reads a value from a specified PHY register - **/ -s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, - u16 *phy_data) -{ - if (hw->phy.id == 0) - ixgbe_identify_phy(hw); - - return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr, - device_type, phy_data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_phy_reg - Write PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @phy_data: Data to write to the PHY register - * - * Writes a value to specified PHY register - **/ -s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, - u16 phy_data) -{ - if (hw->phy.id == 0) - ixgbe_identify_phy(hw); - - return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr, - device_type, phy_data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_setup_phy_link - Restart PHY autoneg - * @hw: pointer to hardware structure - * - * Restart autonegotiation and PHY and waits for completion. - **/ -s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_check_phy_link - Determine link and speed status - * @hw: pointer to hardware structure - * - * Reads a PHY register to determine if link is up and the current speed for - * the PHY. - **/ -s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up) -{ - return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed, - link_up), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_setup_phy_link_speed - Set auto advertise - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * - * Sets the auto advertised capabilities - **/ -s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed, - autoneg, autoneg_wait_to_complete), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_check_link - Get link and speed status - * @hw: pointer to hardware structure - * - * Reads the links register to determine if link is up and the current speed - **/ -s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete) -{ - return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed, - link_up, link_up_wait_to_complete), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_disable_tx_laser - Disable Tx laser - * @hw: pointer to hardware structure - * - * If the driver needs to disable the laser on SFI optics. - **/ -void ixgbe_disable_tx_laser(struct ixgbe_hw *hw) -{ - if (hw->mac.ops.disable_tx_laser) - hw->mac.ops.disable_tx_laser(hw); -} - -/** - * ixgbe_enable_tx_laser - Enable Tx laser - * @hw: pointer to hardware structure - * - * If the driver needs to enable the laser on SFI optics. - **/ -void ixgbe_enable_tx_laser(struct ixgbe_hw *hw) -{ - if (hw->mac.ops.enable_tx_laser) - hw->mac.ops.enable_tx_laser(hw); -} - -/** - * ixgbe_flap_tx_laser - flap Tx laser to start autotry process - * @hw: pointer to hardware structure - * - * When the driver changes the link speeds that it can support then - * flap the tx laser to alert the link partner to start autotry - * process on its end. - **/ -void ixgbe_flap_tx_laser(struct ixgbe_hw *hw) -{ - if (hw->mac.ops.flap_tx_laser) - hw->mac.ops.flap_tx_laser(hw); -} - -/** - * ixgbe_setup_link - Set link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * - * Configures link settings. Restarts the link. - * Performs autonegotiation if needed. - **/ -s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed, - autoneg, autoneg_wait_to_complete), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_link_capabilities - Returns link capabilities - * @hw: pointer to hardware structure - * - * Determines the link capabilities of the current configuration. - **/ -s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *autoneg) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw, - speed, autoneg), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_led_on - Turn on LEDs - * @hw: pointer to hardware structure - * @index: led number to turn on - * - * Turns on the software controllable LEDs. - **/ -s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_led_off - Turn off LEDs - * @hw: pointer to hardware structure - * @index: led number to turn off - * - * Turns off the software controllable LEDs. - **/ -s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_blink_led_start - Blink LEDs - * @hw: pointer to hardware structure - * @index: led number to blink - * - * Blink LED based on index. - **/ -s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_blink_led_stop - Stop blinking LEDs - * @hw: pointer to hardware structure - * - * Stop blinking LED based on index. - **/ -s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_eeprom_params - Initialize EEPROM parameters - * @hw: pointer to hardware structure - * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. - **/ -s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw), - IXGBE_NOT_IMPLEMENTED); -} - - -/** - * ixgbe_write_eeprom - Write word to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM - * - * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not - * called after this function, the EEPROM will most likely contain an - * invalid checksum. - **/ -s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word(s) to be written to the EEPROM - * @words: number of words - * - * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not - * called after this function, the EEPROM will most likely contain an - * invalid checksum. - **/ -s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words, - u16 *data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer, - (hw, offset, words, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_eeprom - Read word from EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM - * - * Reads 16 bit value from EEPROM - **/ -s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit word(s) from EEPROM - * @words: number of words - * - * Reads 16 bit word(s) from EEPROM - **/ -s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer, - (hw, offset, words, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum - * - * Performs checksum calculation and validates the EEPROM checksum - **/ -s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum, - (hw, checksum_val), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum - * @hw: pointer to hardware structure - **/ -s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_insert_mac_addr - Find a RAR for this mac address - * @hw: pointer to hardware structure - * @addr: Address to put into receive address register - * @vmdq: VMDq pool to assign - * - * Puts an ethernet address into a receive address register, or - * finds the rar that it is already in; adds to the pool list - **/ -s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr, - (hw, addr, vmdq), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_rar - Set Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * @addr: Address to put into receive address register - * @vmdq: VMDq "set" - * @enable_addr: set flag that address is active - * - * Puts an ethernet address into a receive address register. - **/ -s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, - u32 enable_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq, - enable_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_rar - Clear Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * - * Puts an ethernet address into a receive address register. - **/ -s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_vmdq - Associate a VMDq index with a receive address - * @hw: pointer to hardware structure - * @rar: receive address register index to associate with VMDq index - * @vmdq: VMDq set or pool index - **/ -s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq), - IXGBE_NOT_IMPLEMENTED); - -} - -/** - * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address - * @hw: pointer to hardware structure - * @vmdq: VMDq default pool index - **/ -s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac, - (hw, vmdq), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address - * @hw: pointer to hardware structure - * @rar: receive address register index to disassociate with VMDq index - * @vmdq: VMDq set or pool index - **/ -s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_rx_addrs - Initializes receive address filters. - * @hw: pointer to hardware structure - * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive address registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. - **/ -s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_num_rx_addrs - Returns the number of RAR entries. - * @hw: pointer to hardware structure - **/ -u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw) -{ - return hw->mac.num_rar_entries; -} - -/** - * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses - * @hw: pointer to hardware structure - * @addr_list: the list of new multicast addresses - * @addr_count: number of addresses - * @func: iterator function to walk the multicast address list - * - * The given list replaces any existing list. Clears the secondary addrs from - * receive address registers. Uses unused receive address registers for the - * first secondary addresses, and falls back to promiscuous mode as needed. - **/ -s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, - u32 addr_count, ixgbe_mc_addr_itr func) -{ - return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw, - addr_list, addr_count, func), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses - * @hw: pointer to hardware structure - * @mc_addr_list: the list of new multicast addresses - * @mc_addr_count: number of addresses - * @func: iterator function to walk the multicast address list - * - * The given list replaces any existing list. Clears the MC addrs from receive - * address registers and the multicast table. Uses unused receive address - * registers for the first multicast addresses, and hashes the rest into the - * multicast table. - **/ -s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, ixgbe_mc_addr_itr func, - bool clear) -{ - return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw, - mc_addr_list, mc_addr_count, func, clear), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_enable_mc - Enable multicast address in RAR - * @hw: pointer to hardware structure - * - * Enables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_enable_mc(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_disable_mc - Disable multicast address in RAR - * @hw: pointer to hardware structure - * - * Disables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_disable_mc(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_vfta - Clear VLAN filter table - * @hw: pointer to hardware structure - * - * Clears the VLAN filer table, and the VMDq index associated with the filter - **/ -s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_vfta - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFTA - * @vlan_on: boolean flag to turn on/off VLAN in VFTA - * - * Turn on/off specified VLAN in the VLAN filter table. - **/ -s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind, - vlan_on), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_vlvf - Set VLAN Pool Filter - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFVFB - * @vlan_on: boolean flag to turn on/off VLAN in VFVF - * @vfta_changed: pointer to boolean flag which indicates whether VFTA - * should be changed - * - * Turn on/off specified bit in VLVF table. - **/ -s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, - bool *vfta_changed) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind, - vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_fc_enable - Enable flow control - * @hw: pointer to hardware structure - * - * Configures the flow control settings based on SW configuration. - **/ -s32 ixgbe_fc_enable(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_fw_drv_ver - Try to send the driver version number FW - * @hw: pointer to hardware structure - * @maj: driver major number to be sent to firmware - * @min: driver minor number to be sent to firmware - * @build: driver build number to be sent to firmware - * @ver: driver version number to be sent to firmware - **/ -s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, - u8 ver) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min, - build, ver), IXGBE_NOT_IMPLEMENTED); -} - - -/** - * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data - * @hw: pointer to hardware structure - * - * Updates the temperatures in mac.thermal_sensor_data - **/ -s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds - * @hw: pointer to hardware structure - * - * Inits the thermal sensor thresholds according to the NVM map - **/ -s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw), - IXGBE_NOT_IMPLEMENTED); -} -/** - * ixgbe_read_analog_reg8 - Reads 8 bit analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value - * - * Performs write operation to analog register specified. - **/ -s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) -{ - return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg, - val), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_analog_reg8 - Writes 8 bit analog register - * @hw: pointer to hardware structure - * @reg: analog register to write - * @val: value to write - * - * Performs write operation to Atlas analog register specified. - **/ -s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val) -{ - return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg, - val), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_uta_tables - Initializes Unicast Table Arrays. - * @hw: pointer to hardware structure - * - * Initializes the Unicast Table Arrays to zero on device load. This - * is part of the Rx init addr execution path. - **/ -s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, - u8 *data) -{ - return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset, - dev_addr, data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_i2c_byte - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface - * at a specified device address. - **/ -s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, - u8 data) -{ - return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset, - dev_addr, data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to write - * @eeprom_data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, - u8 byte_offset, u8 eeprom_data) -{ - return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom, - (hw, byte_offset, eeprom_data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) -{ - return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom, - (hw, byte_offset, eeprom_data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_supported_physical_layer - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer, - (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN); -} - -/** - * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics - * @hw: pointer to hardware structure - * @regval: bitfield to write to the Rx DMA register - * - * Enables the Rx DMA unit of the device. - **/ -s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval) -{ - return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma, - (hw, regval), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_disable_sec_rx_path - Stops the receive data path - * @hw: pointer to hardware structure - * - * Stops the receive data path. - **/ -s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path, - (hw), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_enable_sec_rx_path - Enables the receive data path - * @hw: pointer to hardware structure - * - * Enables the receive data path. - **/ -s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path, - (hw), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire - * - * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) -{ - return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync, - (hw, mask), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_release_swfw_semaphore - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release - * - * Releases the SWFW semaphore through SW_FW_SYNC register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) -{ - if (hw->mac.ops.release_swfw_sync) - hw->mac.ops.release_swfw_sync(hw, mask); -} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h deleted file mode 100644 index 11247a0b65..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h +++ /dev/null @@ -1,153 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_API_H_ -#define _IXGBE_API_H_ - -#include "ixgbe_type.h" - -s32 ixgbe_init_shared_code(struct ixgbe_hw *hw); - -extern s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw); -extern s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw); -extern s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw); - -s32 ixgbe_set_mac_type(struct ixgbe_hw *hw); -s32 ixgbe_init_hw(struct ixgbe_hw *hw); -s32 ixgbe_reset_hw(struct ixgbe_hw *hw); -s32 ixgbe_start_hw(struct ixgbe_hw *hw); -s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw); -enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw); -s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr); -s32 ixgbe_get_bus_info(struct ixgbe_hw *hw); -u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw); -u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw); -s32 ixgbe_stop_adapter(struct ixgbe_hw *hw); -s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size); - -s32 ixgbe_identify_phy(struct ixgbe_hw *hw); -s32 ixgbe_reset_phy(struct ixgbe_hw *hw); -s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, - u16 *phy_data); -s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, - u16 phy_data); - -s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw); -s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *link_up); -s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); -void ixgbe_disable_tx_laser(struct ixgbe_hw *hw); -void ixgbe_enable_tx_laser(struct ixgbe_hw *hw); -void ixgbe_flap_tx_laser(struct ixgbe_hw *hw); -s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); -s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete); -s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *autoneg); -s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index); - -s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw); -s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data); -s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data); -s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); - -s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val); -s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw); - -s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); -s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, - u32 enable_addr); -s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq); -s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq); -s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq); -s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw); -u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw); -s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, - u32 addr_count, ixgbe_mc_addr_itr func); -s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, ixgbe_mc_addr_itr func, - bool clear); -void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr_list, u32 vmdq); -s32 ixgbe_enable_mc(struct ixgbe_hw *hw); -s32 ixgbe_disable_mc(struct ixgbe_hw *hw); -s32 ixgbe_clear_vfta(struct ixgbe_hw *hw); -s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, - u32 vind, bool vlan_on); -s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on, bool *vfta_changed); -s32 ixgbe_fc_enable(struct ixgbe_hw *hw); -s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, - u8 ver); -s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw); -s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw); -void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr); -s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, - u16 *firmware_version); -s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val); -s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val); -s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw); -s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); -u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw); -s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval); -s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw); -s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw); -s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw); -s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl); -s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl); -s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_hash_dword input, - union ixgbe_atr_hash_dword common, - u8 queue); -s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input_mask); -s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - u16 soft_id, u8 queue); -s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - u16 soft_id); -s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - union ixgbe_atr_input *mask, - u16 soft_id, - u8 queue); -void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, - union ixgbe_atr_input *mask); -u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, - union ixgbe_atr_hash_dword common); -s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, - u8 *data); -s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, - u8 data); -s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data); -s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr); -s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr); -s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps); -s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask); -void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask); -s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix); -s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs); - -#endif /* _IXGBE_API_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c deleted file mode 100644 index e9b9529a22..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c +++ /dev/null @@ -1,4067 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_common.h" -#include "ixgbe_phy.h" -#include "ixgbe_api.h" - -static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); -static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); -static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); -static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); -static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); -static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, - u16 count); -static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); -static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); -static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); -static void ixgbe_release_eeprom(struct ixgbe_hw *hw); - -static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); -static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, - u16 *san_mac_offset); -static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, - u16 offset); - -/** - * ixgbe_init_ops_generic - Inits function ptrs - * @hw: pointer to the hardware structure - * - * Initialize the function pointers. - **/ -s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - struct ixgbe_mac_info *mac = &hw->mac; - u32 eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - /* EEPROM */ - eeprom->ops.init_params = &ixgbe_init_eeprom_params_generic; - /* If EEPROM is valid (bit 8 = 1), use EERD otherwise use bit bang */ - if (eec & IXGBE_EEC_PRES) { - eeprom->ops.read = &ixgbe_read_eerd_generic; - eeprom->ops.read_buffer = &ixgbe_read_eerd_buffer_generic; - } else { - eeprom->ops.read = &ixgbe_read_eeprom_bit_bang_generic; - eeprom->ops.read_buffer = - &ixgbe_read_eeprom_buffer_bit_bang_generic; - } - eeprom->ops.write = &ixgbe_write_eeprom_generic; - eeprom->ops.write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic; - eeprom->ops.validate_checksum = - &ixgbe_validate_eeprom_checksum_generic; - eeprom->ops.update_checksum = &ixgbe_update_eeprom_checksum_generic; - eeprom->ops.calc_checksum = &ixgbe_calc_eeprom_checksum_generic; - - /* MAC */ - mac->ops.init_hw = &ixgbe_init_hw_generic; - mac->ops.reset_hw = NULL; - mac->ops.start_hw = &ixgbe_start_hw_generic; - mac->ops.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic; - mac->ops.get_media_type = NULL; - mac->ops.get_supported_physical_layer = NULL; - mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_generic; - mac->ops.get_mac_addr = &ixgbe_get_mac_addr_generic; - mac->ops.stop_adapter = &ixgbe_stop_adapter_generic; - mac->ops.get_bus_info = &ixgbe_get_bus_info_generic; - mac->ops.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie; - mac->ops.acquire_swfw_sync = &ixgbe_acquire_swfw_sync; - mac->ops.release_swfw_sync = &ixgbe_release_swfw_sync; - - /* LEDs */ - mac->ops.led_on = &ixgbe_led_on_generic; - mac->ops.led_off = &ixgbe_led_off_generic; - mac->ops.blink_led_start = &ixgbe_blink_led_start_generic; - mac->ops.blink_led_stop = &ixgbe_blink_led_stop_generic; - - /* RAR, Multicast, VLAN */ - mac->ops.set_rar = &ixgbe_set_rar_generic; - mac->ops.clear_rar = &ixgbe_clear_rar_generic; - mac->ops.insert_mac_addr = NULL; - mac->ops.set_vmdq = NULL; - mac->ops.clear_vmdq = NULL; - mac->ops.init_rx_addrs = &ixgbe_init_rx_addrs_generic; - mac->ops.update_uc_addr_list = &ixgbe_update_uc_addr_list_generic; - mac->ops.update_mc_addr_list = &ixgbe_update_mc_addr_list_generic; - mac->ops.enable_mc = &ixgbe_enable_mc_generic; - mac->ops.disable_mc = &ixgbe_disable_mc_generic; - mac->ops.clear_vfta = NULL; - mac->ops.set_vfta = NULL; - mac->ops.set_vlvf = NULL; - mac->ops.init_uta_tables = NULL; - - /* Flow Control */ - mac->ops.fc_enable = &ixgbe_fc_enable_generic; - - /* Link */ - mac->ops.get_link_capabilities = NULL; - mac->ops.setup_link = NULL; - mac->ops.check_link = NULL; - - return 0; -} - -/** - * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow - * control - * @hw: pointer to hardware structure - * - * There are several phys that do not support autoneg flow control. This - * function check the device id to see if the associated phy supports - * autoneg flow control. - **/ -static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) -{ - - switch (hw->device_id) { - case IXGBE_DEV_ID_X540T: - return 0; - case IXGBE_DEV_ID_82599_T3_LOM: - return 0; - default: - return IXGBE_ERR_FC_NOT_SUPPORTED; - } -} - -/** - * ixgbe_setup_fc - Set up flow control - * @hw: pointer to hardware structure - * - * Called at init time to set up flow control. - **/ -static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - u32 reg = 0, reg_bp = 0; - u16 reg_cu = 0; - - /* - * Validate the requested mode. Strict IEEE mode does not allow - * ixgbe_fc_rx_pause because it will cause us to fail at UNH. - */ - if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { - hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - - /* - * 10gig parts do not have a word in the EEPROM to determine the - * default flow control setting, so we explicitly set it to full. - */ - if (hw->fc.requested_mode == ixgbe_fc_default) - hw->fc.requested_mode = ixgbe_fc_full; - - /* - * Set up the 1G and 10G flow control advertisement registers so the - * HW will be able to do fc autoneg once the cable is plugged in. If - * we link at 10G, the 1G advertisement is harmless and vice versa. - */ - switch (hw->phy.media_type) { - case ixgbe_media_type_fiber: - case ixgbe_media_type_backplane: - reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); - reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC); - break; - case ixgbe_media_type_copper: - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®_cu); - break; - default: - break; - } - - /* - * The possible values of fc.requested_mode are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but - * we do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. - * other: Invalid. - */ - switch (hw->fc.requested_mode) { - case ixgbe_fc_none: - /* Flow control completely disabled by software override. */ - reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); - if (hw->phy.media_type == ixgbe_media_type_backplane) - reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE | - IXGBE_AUTOC_ASM_PAUSE); - else if (hw->phy.media_type == ixgbe_media_type_copper) - reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); - break; - case ixgbe_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is - * disabled by software override. - */ - reg |= IXGBE_PCS1GANA_ASM_PAUSE; - reg &= ~IXGBE_PCS1GANA_SYM_PAUSE; - if (hw->phy.media_type == ixgbe_media_type_backplane) { - reg_bp |= IXGBE_AUTOC_ASM_PAUSE; - reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE; - } else if (hw->phy.media_type == ixgbe_media_type_copper) { - reg_cu |= IXGBE_TAF_ASM_PAUSE; - reg_cu &= ~IXGBE_TAF_SYM_PAUSE; - } - break; - case ixgbe_fc_rx_pause: - /* - * Rx Flow control is enabled and Tx Flow control is - * disabled by software override. Since there really - * isn't a way to advertise that we are capable of RX - * Pause ONLY, we will advertise that we support both - * symmetric and asymmetric Rx PAUSE, as such we fall - * through to the fc_full statement. Later, we will - * disable the adapter's ability to send PAUSE frames. - */ - case ixgbe_fc_full: - /* Flow control (both Rx and Tx) is enabled by SW override. */ - reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE; - if (hw->phy.media_type == ixgbe_media_type_backplane) - reg_bp |= IXGBE_AUTOC_SYM_PAUSE | - IXGBE_AUTOC_ASM_PAUSE; - else if (hw->phy.media_type == ixgbe_media_type_copper) - reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE; - break; - default: - hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = IXGBE_ERR_CONFIG; - goto out; - break; - } - - if (hw->mac.type != ixgbe_mac_X540) { - /* - * Enable auto-negotiation between the MAC & PHY; - * the MAC will advertise clause 37 flow control. - */ - IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); - reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); - - /* Disable AN timeout */ - if (hw->fc.strict_ieee) - reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; - - IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); - hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); - } - - /* - * AUTOC restart handles negotiation of 1G and 10G on backplane - * and copper. There is no need to set the PCS1GCTL register. - * - */ - if (hw->phy.media_type == ixgbe_media_type_backplane) { - reg_bp |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp); - } else if ((hw->phy.media_type == ixgbe_media_type_copper) && - (ixgbe_device_supports_autoneg_fc(hw) == 0)) { - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg_cu); - } - - hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); -out: - return ret_val; -} - -/** - * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure - * - * Starts the hardware by filling the bus info structure and media type, clears - * all on chip counters, initializes receive address registers, multicast - * table, VLAN filter table, calls routine to set up link and flow control - * settings, and leaves transmit and receive units disabled and uninitialized - **/ -s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) -{ - s32 ret_val; - u32 ctrl_ext; - - /* Set the media type */ - hw->phy.media_type = hw->mac.ops.get_media_type(hw); - - /* PHY ops initialization must be done in reset_hw() */ - - /* Clear the VLAN filter table */ - hw->mac.ops.clear_vfta(hw); - - /* Clear statistics registers */ - hw->mac.ops.clear_hw_cntrs(hw); - - /* Set No Snoop Disable */ - ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); - ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; - IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); - IXGBE_WRITE_FLUSH(hw); - - /* Setup flow control */ - ret_val = ixgbe_setup_fc(hw); - if (ret_val != 0) - goto out; - - /* Clear adapter stopped flag */ - hw->adapter_stopped = false; - -out: - return ret_val; -} - -/** - * ixgbe_start_hw_gen2 - Init sequence for common device family - * @hw: pointer to hw structure - * - * Performs the init sequence common to the second generation - * of 10 GbE devices. - * Devices in the second generation: - * 82599 - * X540 - **/ -s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) -{ - u32 i; - u32 regval; - - /* Clear the rate limiters */ - for (i = 0; i < hw->mac.max_tx_queues; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); - IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); - } - IXGBE_WRITE_FLUSH(hw); - - /* Disable relaxed ordering */ - for (i = 0; i < hw->mac.max_tx_queues; i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); - regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); - } - - for (i = 0; i < hw->mac.max_rx_queues; i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); - regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | - IXGBE_DCA_RXCTRL_HEAD_WRO_EN); - IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); - } - - return 0; -} - -/** - * ixgbe_init_hw_generic - Generic hardware initialization - * @hw: pointer to hardware structure - * - * Initialize the hardware by resetting the hardware, filling the bus info - * structure and media type, clears all on chip counters, initializes receive - * address registers, multicast table, VLAN filter table, calls routine to set - * up link and flow control settings, and leaves transmit and receive units - * disabled and uninitialized - **/ -s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) -{ - s32 status; - - /* Reset the hardware */ - status = hw->mac.ops.reset_hw(hw); - - if (status == 0) { - /* Start the HW */ - status = hw->mac.ops.start_hw(hw); - } - - return status; -} - -/** - * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters - * @hw: pointer to hardware structure - * - * Clears all hardware statistics counters by reading them from the hardware - * Statistics counters are clear on read. - **/ -s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) -{ - u16 i = 0; - - IXGBE_READ_REG(hw, IXGBE_CRCERRS); - IXGBE_READ_REG(hw, IXGBE_ILLERRC); - IXGBE_READ_REG(hw, IXGBE_ERRBC); - IXGBE_READ_REG(hw, IXGBE_MSPDC); - for (i = 0; i < 8; i++) - IXGBE_READ_REG(hw, IXGBE_MPC(i)); - - IXGBE_READ_REG(hw, IXGBE_MLFC); - IXGBE_READ_REG(hw, IXGBE_MRFC); - IXGBE_READ_REG(hw, IXGBE_RLEC); - IXGBE_READ_REG(hw, IXGBE_LXONTXC); - IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); - if (hw->mac.type >= ixgbe_mac_82599EB) { - IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); - IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); - } else { - IXGBE_READ_REG(hw, IXGBE_LXONRXC); - IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); - } - - for (i = 0; i < 8; i++) { - IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); - IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); - if (hw->mac.type >= ixgbe_mac_82599EB) { - IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); - IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); - } else { - IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); - IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); - } - } - if (hw->mac.type >= ixgbe_mac_82599EB) - for (i = 0; i < 8; i++) - IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i)); - IXGBE_READ_REG(hw, IXGBE_PRC64); - IXGBE_READ_REG(hw, IXGBE_PRC127); - IXGBE_READ_REG(hw, IXGBE_PRC255); - IXGBE_READ_REG(hw, IXGBE_PRC511); - IXGBE_READ_REG(hw, IXGBE_PRC1023); - IXGBE_READ_REG(hw, IXGBE_PRC1522); - IXGBE_READ_REG(hw, IXGBE_GPRC); - IXGBE_READ_REG(hw, IXGBE_BPRC); - IXGBE_READ_REG(hw, IXGBE_MPRC); - IXGBE_READ_REG(hw, IXGBE_GPTC); - IXGBE_READ_REG(hw, IXGBE_GORCL); - IXGBE_READ_REG(hw, IXGBE_GORCH); - IXGBE_READ_REG(hw, IXGBE_GOTCL); - IXGBE_READ_REG(hw, IXGBE_GOTCH); - if (hw->mac.type == ixgbe_mac_82598EB) - for (i = 0; i < 8; i++) - IXGBE_READ_REG(hw, IXGBE_RNBC(i)); - IXGBE_READ_REG(hw, IXGBE_RUC); - IXGBE_READ_REG(hw, IXGBE_RFC); - IXGBE_READ_REG(hw, IXGBE_ROC); - IXGBE_READ_REG(hw, IXGBE_RJC); - IXGBE_READ_REG(hw, IXGBE_MNGPRC); - IXGBE_READ_REG(hw, IXGBE_MNGPDC); - IXGBE_READ_REG(hw, IXGBE_MNGPTC); - IXGBE_READ_REG(hw, IXGBE_TORL); - IXGBE_READ_REG(hw, IXGBE_TORH); - IXGBE_READ_REG(hw, IXGBE_TPR); - IXGBE_READ_REG(hw, IXGBE_TPT); - IXGBE_READ_REG(hw, IXGBE_PTC64); - IXGBE_READ_REG(hw, IXGBE_PTC127); - IXGBE_READ_REG(hw, IXGBE_PTC255); - IXGBE_READ_REG(hw, IXGBE_PTC511); - IXGBE_READ_REG(hw, IXGBE_PTC1023); - IXGBE_READ_REG(hw, IXGBE_PTC1522); - IXGBE_READ_REG(hw, IXGBE_MPTC); - IXGBE_READ_REG(hw, IXGBE_BPTC); - for (i = 0; i < 16; i++) { - IXGBE_READ_REG(hw, IXGBE_QPRC(i)); - IXGBE_READ_REG(hw, IXGBE_QPTC(i)); - if (hw->mac.type >= ixgbe_mac_82599EB) { - IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); - IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); - IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); - IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); - IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); - } else { - IXGBE_READ_REG(hw, IXGBE_QBRC(i)); - IXGBE_READ_REG(hw, IXGBE_QBTC(i)); - } - } - - if (hw->mac.type == ixgbe_mac_X540) { - if (hw->phy.id == 0) - ixgbe_identify_phy(hw); - hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL, - IXGBE_MDIO_PCS_DEV_TYPE, &i); - hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH, - IXGBE_MDIO_PCS_DEV_TYPE, &i); - hw->phy.ops.read_reg(hw, IXGBE_LDPCECL, - IXGBE_MDIO_PCS_DEV_TYPE, &i); - hw->phy.ops.read_reg(hw, IXGBE_LDPCECH, - IXGBE_MDIO_PCS_DEV_TYPE, &i); - } - - return 0; -} - -/** - * ixgbe_read_pba_string_generic - Reads part number string from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number string from the EEPROM - * @pba_num_size: part number string buffer length - * - * Reads the part number string from the EEPROM. - **/ -s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, - u32 pba_num_size) -{ - s32 ret_val; - u16 data; - u16 pba_ptr; - u16 offset; - u16 length; - - if (pba_num == NULL) { - hw_dbg(hw, "PBA string buffer was null\n"); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - - ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - - /* - * if data is not ptr guard the PBA must be in legacy format which - * means pba_ptr is actually our second data word for the PBA number - * and we can decode it into an ascii string - */ - if (data != IXGBE_PBANUM_PTR_GUARD) { - hw_dbg(hw, "NVM PBA number is not stored as string\n"); - - /* we will need 11 characters to store the PBA */ - if (pba_num_size < 11) { - hw_dbg(hw, "PBA string buffer too small\n"); - return IXGBE_ERR_NO_SPACE; - } - - /* extract hex string from data and pba_ptr */ - pba_num[0] = (data >> 12) & 0xF; - pba_num[1] = (data >> 8) & 0xF; - pba_num[2] = (data >> 4) & 0xF; - pba_num[3] = data & 0xF; - pba_num[4] = (pba_ptr >> 12) & 0xF; - pba_num[5] = (pba_ptr >> 8) & 0xF; - pba_num[6] = '-'; - pba_num[7] = 0; - pba_num[8] = (pba_ptr >> 4) & 0xF; - pba_num[9] = pba_ptr & 0xF; - - /* put a null character on the end of our string */ - pba_num[10] = '\0'; - - /* switch all the data but the '-' to hex char */ - for (offset = 0; offset < 10; offset++) { - if (pba_num[offset] < 0xA) - pba_num[offset] += '0'; - else if (pba_num[offset] < 0x10) - pba_num[offset] += 'A' - 0xA; - } - - return 0; - } - - ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - - if (length == 0xFFFF || length == 0) { - hw_dbg(hw, "NVM PBA number section invalid length\n"); - return IXGBE_ERR_PBA_SECTION; - } - - /* check if pba_num buffer is big enough */ - if (pba_num_size < (((u32)length * 2) - 1)) { - hw_dbg(hw, "PBA string buffer too small\n"); - return IXGBE_ERR_NO_SPACE; - } - - /* trim pba length from start of string */ - pba_ptr++; - length--; - - for (offset = 0; offset < length; offset++) { - ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - pba_num[offset * 2] = (u8)(data >> 8); - pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); - } - pba_num[offset * 2] = '\0'; - - return 0; -} - -/** - * ixgbe_get_mac_addr_generic - Generic get MAC address - * @hw: pointer to hardware structure - * @mac_addr: Adapter MAC address - * - * Reads the adapter's MAC address from first Receive Address Register (RAR0) - * A reset of the adapter must be performed prior to calling this function - * in order for the MAC address to have been loaded from the EEPROM into RAR0 - **/ -s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) -{ - u32 rar_high; - u32 rar_low; - u16 i; - - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); - rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); - - for (i = 0; i < 4; i++) - mac_addr[i] = (u8)(rar_low >> (i*8)); - - for (i = 0; i < 2; i++) - mac_addr[i+4] = (u8)(rar_high >> (i*8)); - - return 0; -} - -/** - * ixgbe_get_bus_info_generic - Generic set PCI bus info - * @hw: pointer to hardware structure - * - * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure - **/ -s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - u16 link_status; - - hw->bus.type = ixgbe_bus_type_pci_express; - - /* Get the negotiated link width and speed from PCI config space */ - link_status = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_LINK_STATUS); - - switch (link_status & IXGBE_PCI_LINK_WIDTH) { - case IXGBE_PCI_LINK_WIDTH_1: - hw->bus.width = ixgbe_bus_width_pcie_x1; - break; - case IXGBE_PCI_LINK_WIDTH_2: - hw->bus.width = ixgbe_bus_width_pcie_x2; - break; - case IXGBE_PCI_LINK_WIDTH_4: - hw->bus.width = ixgbe_bus_width_pcie_x4; - break; - case IXGBE_PCI_LINK_WIDTH_8: - hw->bus.width = ixgbe_bus_width_pcie_x8; - break; - default: - hw->bus.width = ixgbe_bus_width_unknown; - break; - } - - switch (link_status & IXGBE_PCI_LINK_SPEED) { - case IXGBE_PCI_LINK_SPEED_2500: - hw->bus.speed = ixgbe_bus_speed_2500; - break; - case IXGBE_PCI_LINK_SPEED_5000: - hw->bus.speed = ixgbe_bus_speed_5000; - break; - case IXGBE_PCI_LINK_SPEED_8000: - hw->bus.speed = ixgbe_bus_speed_8000; - break; - default: - hw->bus.speed = ixgbe_bus_speed_unknown; - break; - } - - mac->ops.set_lan_id(hw); - - return 0; -} - -/** - * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices - * @hw: pointer to the HW structure - * - * Determines the LAN function id by reading memory-mapped registers - * and swaps the port value if requested. - **/ -void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) -{ - struct ixgbe_bus_info *bus = &hw->bus; - u32 reg; - - reg = IXGBE_READ_REG(hw, IXGBE_STATUS); - bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; - bus->lan_id = bus->func; - - /* check for a port swap */ - reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); - if (reg & IXGBE_FACTPS_LFS) - bus->func ^= 0x1; -} - -/** - * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units - * @hw: pointer to hardware structure - * - * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, - * disables transmit and receive units. The adapter_stopped flag is used by - * the shared code and drivers to determine if the adapter is in a stopped - * state and should not touch the hardware. - **/ -s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) -{ - u32 reg_val; - u16 i; - - /* - * Set the adapter_stopped flag so other driver functions stop touching - * the hardware - */ - hw->adapter_stopped = true; - - /* Disable the receive unit */ - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, 0); - - /* Clear interrupt mask to stop interrupts from being generated */ - IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); - - /* Clear any pending interrupts, flush previous writes */ - IXGBE_READ_REG(hw, IXGBE_EICR); - - /* Disable the transmit unit. Each queue must be disabled. */ - for (i = 0; i < hw->mac.max_tx_queues; i++) - IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH); - - /* Disable the receive unit by stopping each queue */ - for (i = 0; i < hw->mac.max_rx_queues; i++) { - reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); - reg_val &= ~IXGBE_RXDCTL_ENABLE; - reg_val |= IXGBE_RXDCTL_SWFLSH; - IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val); - } - - /* flush all queues disables */ - IXGBE_WRITE_FLUSH(hw); - msleep(2); - - /* - * Prevent the PCI-E bus from from hanging by disabling PCI-E master - * access and verify no pending requests - */ - return ixgbe_disable_pcie_master(hw); -} - -/** - * ixgbe_led_on_generic - Turns on the software controllable LEDs. - * @hw: pointer to hardware structure - * @index: led number to turn on - **/ -s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* To turn on the LED, set mode to ON. */ - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_led_off_generic - Turns off the software controllable LEDs. - * @hw: pointer to hardware structure - * @index: led number to turn off - **/ -s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* To turn off the LED, set mode to OFF. */ - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_init_eeprom_params_generic - Initialize EEPROM params - * @hw: pointer to hardware structure - * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. - **/ -s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - u32 eec; - u16 eeprom_size; - - if (eeprom->type == ixgbe_eeprom_uninitialized) { - eeprom->type = ixgbe_eeprom_none; - /* Set default semaphore delay to 10ms which is a well - * tested value */ - eeprom->semaphore_delay = 10; - /* Clear EEPROM page size, it will be initialized as needed */ - eeprom->word_page_size = 0; - - /* - * Check for EEPROM present first. - * If not present leave as none - */ - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - if (eec & IXGBE_EEC_PRES) { - eeprom->type = ixgbe_eeprom_spi; - - /* - * SPI EEPROM is assumed here. This code would need to - * change if a future EEPROM is not SPI. - */ - eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> - IXGBE_EEC_SIZE_SHIFT); - eeprom->word_size = 1 << (eeprom_size + - IXGBE_EEPROM_WORD_SIZE_SHIFT); - } - - if (eec & IXGBE_EEC_ADDR_SIZE) - eeprom->address_bits = 16; - else - eeprom->address_bits = 8; - hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " - "%d\n", eeprom->type, eeprom->word_size, - eeprom->address_bits); - } - - return 0; -} - -/** - * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to write - * @words: number of word(s) - * @data: 16 bit word(s) to write to EEPROM - * - * Reads 16 bit word(s) from EEPROM through bit-bang method - **/ -s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status = 0; - u16 i, count; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset + words > hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - /* - * The EEPROM page size cannot be queried from the chip. We do lazy - * initialization. It is worth to do that when we write large buffer. - */ - if ((hw->eeprom.word_page_size == 0) && - (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) - ixgbe_detect_eeprom_page_size_generic(hw, offset); - - /* - * We cannot hold synchronization semaphores for too long - * to avoid other entity starvation. However it is more efficient - * to read in bursts than synchronizing access for each word. - */ - for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { - count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? - IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); - status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, - count, &data[i]); - - if (status != 0) - break; - } - -out: - return status; -} - -/** - * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @words: number of word(s) - * @data: 16 bit word(s) to be written to the EEPROM - * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. - **/ -static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status; - u16 word; - u16 page_size; - u16 i; - u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; - - /* Prepare the EEPROM for writing */ - status = ixgbe_acquire_eeprom(hw); - - if (status == 0) { - if (ixgbe_ready_eeprom(hw) != 0) { - ixgbe_release_eeprom(hw); - status = IXGBE_ERR_EEPROM; - } - } - - if (status == 0) { - for (i = 0; i < words; i++) { - ixgbe_standby_eeprom(hw); - - /* Send the WRITE ENABLE command (8 bit opcode ) */ - ixgbe_shift_out_eeprom_bits(hw, - IXGBE_EEPROM_WREN_OPCODE_SPI, - IXGBE_EEPROM_OPCODE_BITS); - - ixgbe_standby_eeprom(hw); - - /* - * Some SPI eeproms use the 8th address bit embedded - * in the opcode - */ - if ((hw->eeprom.address_bits == 8) && - ((offset + i) >= 128)) - write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; - - /* Send the Write command (8-bit opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, write_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), - hw->eeprom.address_bits); - - page_size = hw->eeprom.word_page_size; - - /* Send the data in burst via SPI*/ - do { - word = data[i]; - word = (word >> 8) | (word << 8); - ixgbe_shift_out_eeprom_bits(hw, word, 16); - - if (page_size == 0) - break; - - /* do not wrap around page */ - if (((offset + i) & (page_size - 1)) == - (page_size - 1)) - break; - } while (++i < words); - - ixgbe_standby_eeprom(hw); - msleep(10); - } - /* Done with writing - release the EEPROM */ - ixgbe_release_eeprom(hw); - } - - return status; -} - -/** - * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM - * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. - **/ -s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) -{ - s32 status; - - hw->eeprom.ops.init_params(hw); - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); - -out: - return status; -} - -/** - * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit words(s) from EEPROM - * @words: number of word(s) - * - * Reads 16 bit word(s) from EEPROM through bit-bang method - **/ -s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status = 0; - u16 i, count; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset + words > hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - /* - * We cannot hold synchronization semaphores for too long - * to avoid other entity starvation. However it is more efficient - * to read in bursts than synchronizing access for each word. - */ - for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { - count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? - IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); - - status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, - count, &data[i]); - - if (status != 0) - break; - } - -out: - return status; -} - -/** - * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @words: number of word(s) - * @data: read 16 bit word(s) from EEPROM - * - * Reads 16 bit word(s) from EEPROM through bit-bang method - **/ -static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status; - u16 word_in; - u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; - u16 i; - - /* Prepare the EEPROM for reading */ - status = ixgbe_acquire_eeprom(hw); - - if (status == 0) { - if (ixgbe_ready_eeprom(hw) != 0) { - ixgbe_release_eeprom(hw); - status = IXGBE_ERR_EEPROM; - } - } - - if (status == 0) { - for (i = 0; i < words; i++) { - ixgbe_standby_eeprom(hw); - /* - * Some SPI eeproms use the 8th address bit embedded - * in the opcode - */ - if ((hw->eeprom.address_bits == 8) && - ((offset + i) >= 128)) - read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; - - /* Send the READ command (opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, read_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), - hw->eeprom.address_bits); - - /* Read the data. */ - word_in = ixgbe_shift_in_eeprom_bits(hw, 16); - data[i] = (word_in >> 8) | (word_in << 8); - } - - /* End this read operation */ - ixgbe_release_eeprom(hw); - } - - return status; -} - -/** - * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM - * - * Reads 16 bit value from EEPROM through bit-bang method - **/ -s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 *data) -{ - s32 status; - - hw->eeprom.ops.init_params(hw); - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); - -out: - return status; -} - -/** - * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @words: number of word(s) - * @data: 16 bit word(s) from the EEPROM - * - * Reads a 16 bit word(s) from the EEPROM using the EERD register. - **/ -s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - u32 eerd; - s32 status = 0; - u32 i; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - for (i = 0; i < words; i++) { - eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + - IXGBE_EEPROM_RW_REG_START; - - IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); - - if (status == 0) { - data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> - IXGBE_EEPROM_RW_REG_DATA); - } else { - hw_dbg(hw, "Eeprom read timed out\n"); - goto out; - } - } -out: - return status; -} - -/** - * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be used as a scratch pad - * - * Discover EEPROM page size by writing marching data at given offset. - * This function is called only when we are writing a new large buffer - * at given offset so the data would be overwritten anyway. - **/ -static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, - u16 offset) -{ - u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; - s32 status = 0; - u16 i; - - for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) - data[i] = i; - - hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; - status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, - IXGBE_EEPROM_PAGE_SIZE_MAX, data); - hw->eeprom.word_page_size = 0; - if (status != 0) - goto out; - - status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); - if (status != 0) - goto out; - - /* - * When writing in burst more than the actual page size - * EEPROM address wraps around current page. - */ - hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; - - hw_dbg(hw, "Detected EEPROM page size = %d words.", - hw->eeprom.word_page_size); -out: - return status; -} - -/** - * ixgbe_read_eerd_generic - Read EEPROM word using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM using the EERD register. - **/ -s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) -{ - return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); -} - -/** - * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @words: number of word(s) - * @data: word(s) write to the EEPROM - * - * Write a 16 bit word(s) to the EEPROM using the EEWR register. - **/ -s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - u32 eewr; - s32 status = 0; - u16 i; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - for (i = 0; i < words; i++) { - eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | - (data[i] << IXGBE_EEPROM_RW_REG_DATA) | - IXGBE_EEPROM_RW_REG_START; - - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; - } - - IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); - - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; - } - } - -out: - return status; -} - -/** - * ixgbe_write_eewr_generic - Write EEPROM word using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM - * - * Write a 16 bit word to the EEPROM using the EEWR register. - **/ -s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) -{ - return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); -} - -/** - * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status - * @hw: pointer to hardware structure - * @ee_reg: EEPROM flag for polling - * - * Polls the status bit (bit 1) of the EERD or EEWR to determine when the - * read or write is done respectively. - **/ -s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) -{ - u32 i; - u32 reg; - s32 status = IXGBE_ERR_EEPROM; - - for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { - if (ee_reg == IXGBE_NVM_POLL_READ) - reg = IXGBE_READ_REG(hw, IXGBE_EERD); - else - reg = IXGBE_READ_REG(hw, IXGBE_EEWR); - - if (reg & IXGBE_EEPROM_RW_REG_DONE) { - status = 0; - break; - } - udelay(5); - } - return status; -} - -/** - * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang - * @hw: pointer to hardware structure - * - * Prepares EEPROM for access using bit-bang method. This function should - * be called before issuing a command to the EEPROM. - **/ -static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) -{ - s32 status = 0; - u32 eec; - u32 i; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) - != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - /* Request EEPROM Access */ - eec |= IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - - for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - if (eec & IXGBE_EEC_GNT) - break; - udelay(5); - } - - /* Release if grant not acquired */ - if (!(eec & IXGBE_EEC_GNT)) { - eec &= ~IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - hw_dbg(hw, "Could not acquire EEPROM grant\n"); - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - status = IXGBE_ERR_EEPROM; - } - - /* Setup EEPROM for Read/Write */ - if (status == 0) { - /* Clear CS and SK */ - eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); - } - } - return status; -} - -/** - * ixgbe_get_eeprom_semaphore - Get hardware semaphore - * @hw: pointer to hardware structure - * - * Sets the hardware semaphores so EEPROM access can occur for bit-bang method - **/ -static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_EEPROM; - u32 timeout = 2000; - u32 i; - u32 swsm; - - /* Get SMBI software semaphore between device drivers first */ - for (i = 0; i < timeout; i++) { - /* - * If the SMBI bit is 0 when we read it, then the bit will be - * set and we have the semaphore - */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - if (!(swsm & IXGBE_SWSM_SMBI)) { - status = 0; - break; - } - udelay(50); - } - - if (i == timeout) { - hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore " - "not granted.\n"); - /* - * this release is particularly important because our attempts - * above to get the semaphore may have succeeded, and if there - * was a timeout, we should unconditionally clear the semaphore - * bits to free the driver to make progress - */ - ixgbe_release_eeprom_semaphore(hw); - - udelay(50); - /* - * one last try - * If the SMBI bit is 0 when we read it, then the bit will be - * set and we have the semaphore - */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - if (!(swsm & IXGBE_SWSM_SMBI)) - status = 0; - } - - /* Now get the semaphore between SW/FW through the SWESMBI bit */ - if (status == 0) { - for (i = 0; i < timeout; i++) { - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - - /* Set the SW EEPROM semaphore bit to request access */ - swsm |= IXGBE_SWSM_SWESMBI; - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); - - /* - * If we set the bit successfully then we got the - * semaphore. - */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - if (swsm & IXGBE_SWSM_SWESMBI) - break; - - udelay(50); - } - - /* - * Release semaphores and return error if SW EEPROM semaphore - * was not granted because we don't have access to the EEPROM - */ - if (i >= timeout) { - hw_dbg(hw, "SWESMBI Software EEPROM semaphore " - "not granted.\n"); - ixgbe_release_eeprom_semaphore(hw); - status = IXGBE_ERR_EEPROM; - } - } else { - hw_dbg(hw, "Software semaphore SMBI between device drivers " - "not granted.\n"); - } - - return status; -} - -/** - * ixgbe_release_eeprom_semaphore - Release hardware semaphore - * @hw: pointer to hardware structure - * - * This function clears hardware semaphore bits. - **/ -static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) -{ - u32 swsm; - - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - - /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ - swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); - IXGBE_WRITE_FLUSH(hw); -} - -/** - * ixgbe_ready_eeprom - Polls for EEPROM ready - * @hw: pointer to hardware structure - **/ -static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) -{ - s32 status = 0; - u16 i; - u8 spi_stat_reg; - - /* - * Read "Status Register" repeatedly until the LSB is cleared. The - * EEPROM will signal that the command has been completed by clearing - * bit 0 of the internal status register. If it's not cleared within - * 5 milliseconds, then error out. - */ - for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) { - ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI, - IXGBE_EEPROM_OPCODE_BITS); - spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8); - if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI)) - break; - - udelay(5); - ixgbe_standby_eeprom(hw); - }; - - /* - * On some parts, SPI write time could vary from 0-20mSec on 3.3V - * devices (and only 0-5mSec on 5V devices) - */ - if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { - hw_dbg(hw, "SPI EEPROM Status error\n"); - status = IXGBE_ERR_EEPROM; - } - - return status; -} - -/** - * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state - * @hw: pointer to hardware structure - **/ -static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) -{ - u32 eec; - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - /* Toggle CS to flush commands */ - eec |= IXGBE_EEC_CS; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); - eec &= ~IXGBE_EEC_CS; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); -} - -/** - * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. - * @hw: pointer to hardware structure - * @data: data to send to the EEPROM - * @count: number of bits to shift out - **/ -static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, - u16 count) -{ - u32 eec; - u32 mask; - u32 i; - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - /* - * Mask is used to shift "count" bits of "data" out to the EEPROM - * one bit at a time. Determine the starting bit based on count - */ - mask = 0x01 << (count - 1); - - for (i = 0; i < count; i++) { - /* - * A "1" is shifted out to the EEPROM by setting bit "DI" to a - * "1", and then raising and then lowering the clock (the SK - * bit controls the clock input to the EEPROM). A "0" is - * shifted out to the EEPROM by setting "DI" to "0" and then - * raising and then lowering the clock. - */ - if (data & mask) - eec |= IXGBE_EEC_DI; - else - eec &= ~IXGBE_EEC_DI; - - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - - udelay(1); - - ixgbe_raise_eeprom_clk(hw, &eec); - ixgbe_lower_eeprom_clk(hw, &eec); - - /* - * Shift mask to signify next bit of data to shift in to the - * EEPROM - */ - mask = mask >> 1; - }; - - /* We leave the "DI" bit set to "0" when we leave this routine. */ - eec &= ~IXGBE_EEC_DI; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); -} - -/** - * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM - * @hw: pointer to hardware structure - **/ -static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) -{ - u32 eec; - u32 i; - u16 data = 0; - - /* - * In order to read a register from the EEPROM, we need to shift - * 'count' bits in from the EEPROM. Bits are "shifted in" by raising - * the clock input to the EEPROM (setting the SK bit), and then reading - * the value of the "DO" bit. During this "shifting in" process the - * "DI" bit should always be clear. - */ - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); - - for (i = 0; i < count; i++) { - data = data << 1; - ixgbe_raise_eeprom_clk(hw, &eec); - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - eec &= ~(IXGBE_EEC_DI); - if (eec & IXGBE_EEC_DO) - data |= 1; - - ixgbe_lower_eeprom_clk(hw, &eec); - } - - return data; -} - -/** - * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. - * @hw: pointer to hardware structure - * @eec: EEC register's current value - **/ -static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) -{ - /* - * Raise the clock input to the EEPROM - * (setting the SK bit), then delay - */ - *eec = *eec | IXGBE_EEC_SK; - IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); -} - -/** - * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. - * @hw: pointer to hardware structure - * @eecd: EECD's current value - **/ -static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) -{ - /* - * Lower the clock input to the EEPROM (clearing the SK bit), then - * delay - */ - *eec = *eec & ~IXGBE_EEC_SK; - IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); -} - -/** - * ixgbe_release_eeprom - Release EEPROM, release semaphores - * @hw: pointer to hardware structure - **/ -static void ixgbe_release_eeprom(struct ixgbe_hw *hw) -{ - u32 eec; - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - eec |= IXGBE_EEC_CS; /* Pull CS high */ - eec &= ~IXGBE_EEC_SK; /* Lower SCK */ - - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - - udelay(1); - - /* Stop requesting EEPROM access */ - eec &= ~IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - - /* Delay before attempt to obtain semaphore again to allow FW access */ - msleep(hw->eeprom.semaphore_delay); -} - -/** - * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum - * @hw: pointer to hardware structure - **/ -u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) -{ - u16 i; - u16 j; - u16 checksum = 0; - u16 length = 0; - u16 pointer = 0; - u16 word = 0; - - /* Include 0x0-0x3F in the checksum */ - for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { - if (hw->eeprom.ops.read(hw, i, &word) != 0) { - hw_dbg(hw, "EEPROM read failed\n"); - break; - } - checksum += word; - } - - /* Include all data from pointers except for the fw pointer */ - for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { - hw->eeprom.ops.read(hw, i, &pointer); - - /* Make sure the pointer seems valid */ - if (pointer != 0xFFFF && pointer != 0) { - hw->eeprom.ops.read(hw, pointer, &length); - - if (length != 0xFFFF && length != 0) { - for (j = pointer+1; j <= pointer+length; j++) { - hw->eeprom.ops.read(hw, j, &word); - checksum += word; - } - } - } - } - - checksum = (u16)IXGBE_EEPROM_SUM - checksum; - - return checksum; -} - -/** - * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum - * - * Performs checksum calculation and validates the EEPROM checksum. If the - * caller does not need checksum_val, the value can be NULL. - **/ -s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, - u16 *checksum_val) -{ - s32 status; - u16 checksum; - u16 read_checksum = 0; - - /* - * Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - status = hw->eeprom.ops.read(hw, 0, &checksum); - - if (status == 0) { - checksum = hw->eeprom.ops.calc_checksum(hw); - - hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); - - /* - * Verify read checksum from EEPROM is the same as - * calculated checksum - */ - if (read_checksum != checksum) - status = IXGBE_ERR_EEPROM_CHECKSUM; - - /* If the user cares, return the calculated checksum */ - if (checksum_val) - *checksum_val = checksum; - } else { - hw_dbg(hw, "EEPROM read failed\n"); - } - - return status; -} - -/** - * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum - * @hw: pointer to hardware structure - **/ -s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) -{ - s32 status; - u16 checksum; - - /* - * Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - status = hw->eeprom.ops.read(hw, 0, &checksum); - - if (status == 0) { - checksum = hw->eeprom.ops.calc_checksum(hw); - status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, - checksum); - } else { - hw_dbg(hw, "EEPROM read failed\n"); - } - - return status; -} - -/** - * ixgbe_validate_mac_addr - Validate MAC address - * @mac_addr: pointer to MAC address. - * - * Tests a MAC address to ensure it is a valid Individual Address - **/ -s32 ixgbe_validate_mac_addr(u8 *mac_addr) -{ - s32 status = 0; - - /* Make sure it is not a multicast address */ - if (IXGBE_IS_MULTICAST(mac_addr)) { - hw_dbg(hw, "MAC address is multicast\n"); - status = IXGBE_ERR_INVALID_MAC_ADDR; - /* Not a broadcast address */ - } else if (IXGBE_IS_BROADCAST(mac_addr)) { - hw_dbg(hw, "MAC address is broadcast\n"); - status = IXGBE_ERR_INVALID_MAC_ADDR; - /* Reject the zero address */ - } else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 && - mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) { - hw_dbg(hw, "MAC address is all zeros\n"); - status = IXGBE_ERR_INVALID_MAC_ADDR; - } - return status; -} - -/** - * ixgbe_set_rar_generic - Set Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * @addr: Address to put into receive address register - * @vmdq: VMDq "set" or "pool" index - * @enable_addr: set flag that address is active - * - * Puts an ethernet address into a receive address register. - **/ -s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, - u32 enable_addr) -{ - u32 rar_low, rar_high; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (index >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - /* setup VMDq pool selection before this RAR gets enabled */ - hw->mac.ops.set_vmdq(hw, index, vmdq); - - /* - * HW expects these in little endian so we reverse the byte - * order from network order (big endian) to little endian - */ - rar_low = ((u32)addr[0] | - ((u32)addr[1] << 8) | - ((u32)addr[2] << 16) | - ((u32)addr[3] << 24)); - /* - * Some parts put the VMDq setting in the extra RAH bits, - * so save everything except the lower 16 bits that hold part - * of the address and the address valid bit. - */ - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); - - if (enable_addr != 0) - rar_high |= IXGBE_RAH_AV; - - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); - IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); - - return 0; -} - -/** - * ixgbe_clear_rar_generic - Remove Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * - * Clears an ethernet address from a receive address register. - **/ -s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 rar_high; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (index >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - /* - * Some parts put the VMDq setting in the extra RAH bits, - * so save everything except the lower 16 bits that hold part - * of the address and the address valid bit. - */ - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); - - /* clear VMDq pool/queue selection for this RAR */ - hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); - - return 0; -} - -/** - * ixgbe_init_rx_addrs_generic - Initializes receive address filters. - * @hw: pointer to hardware structure - * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive address registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. - **/ -s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) -{ - u32 i; - u32 rar_entries = hw->mac.num_rar_entries; - - /* - * If the current mac address is valid, assume it is a software override - * to the permanent address. - * Otherwise, use the permanent address from the eeprom. - */ - if (ixgbe_validate_mac_addr(hw->mac.addr) == - IXGBE_ERR_INVALID_MAC_ADDR) { - /* Get the MAC address from the RAR0 for later reference */ - hw->mac.ops.get_mac_addr(hw, hw->mac.addr); - - hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ", - hw->mac.addr[0], hw->mac.addr[1], - hw->mac.addr[2]); - hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], - hw->mac.addr[4], hw->mac.addr[5]); - } else { - /* Setup the receive address. */ - hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); - hw_dbg(hw, " New MAC Addr =%.2X %.2X %.2X ", - hw->mac.addr[0], hw->mac.addr[1], - hw->mac.addr[2]); - hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], - hw->mac.addr[4], hw->mac.addr[5]); - - hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); - - /* clear VMDq pool/queue selection for RAR 0 */ - hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); - } - hw->addr_ctrl.overflow_promisc = 0; - - hw->addr_ctrl.rar_used_count = 1; - - /* Zero out the other receive addresses. */ - hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1); - for (i = 1; i < rar_entries; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); - } - - /* Clear the MTA */ - hw->addr_ctrl.mta_in_use = 0; - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); - - hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < hw->mac.mcft_size; i++) - IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); - - ixgbe_init_uta_tables(hw); - - return 0; -} - -/** - * ixgbe_add_uc_addr - Adds a secondary unicast address. - * @hw: pointer to hardware structure - * @addr: new address - * - * Adds it to unused receive address register or goes into promiscuous mode. - **/ -void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) -{ - u32 rar_entries = hw->mac.num_rar_entries; - u32 rar; - - hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", - addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); - - /* - * Place this address in the RAR if there is room, - * else put the controller into promiscuous mode - */ - if (hw->addr_ctrl.rar_used_count < rar_entries) { - rar = hw->addr_ctrl.rar_used_count; - hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); - hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); - hw->addr_ctrl.rar_used_count++; - } else { - hw->addr_ctrl.overflow_promisc++; - } - - hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); -} - -/** - * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses - * @hw: pointer to hardware structure - * @addr_list: the list of new addresses - * @addr_count: number of addresses - * @next: iterator function to walk the address list - * - * The given list replaces any existing list. Clears the secondary addrs from - * receive address registers. Uses unused receive address registers for the - * first secondary addresses, and falls back to promiscuous mode as needed. - * - * Drivers using secondary unicast addresses must set user_set_promisc when - * manually putting the device into promiscuous mode. - **/ -s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, - u32 addr_count, ixgbe_mc_addr_itr next) -{ - u8 *addr; - u32 i; - u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; - u32 uc_addr_in_use; - u32 fctrl; - u32 vmdq; - - /* - * Clear accounting of old secondary address list, - * don't count RAR[0] - */ - uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1; - hw->addr_ctrl.rar_used_count -= uc_addr_in_use; - hw->addr_ctrl.overflow_promisc = 0; - - /* Zero out the other receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use+1); - for (i = 0; i < uc_addr_in_use; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0); - } - - /* Add the new addresses */ - for (i = 0; i < addr_count; i++) { - hw_dbg(hw, " Adding the secondary addresses:\n"); - addr = next(hw, &addr_list, &vmdq); - ixgbe_add_uc_addr(hw, addr, vmdq); - } - - if (hw->addr_ctrl.overflow_promisc) { - /* enable promisc if not already in overflow or set by user */ - if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { - hw_dbg(hw, " Entering address overflow promisc mode\n"); - fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - fctrl |= IXGBE_FCTRL_UPE; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); - } - } else { - /* only disable if set by overflow, not by user */ - if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { - hw_dbg(hw, " Leaving address overflow promisc mode\n"); - fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - fctrl &= ~IXGBE_FCTRL_UPE; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); - } - } - - hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n"); - return 0; -} - -/** - * ixgbe_mta_vector - Determines bit-vector in multicast table to set - * @hw: pointer to hardware structure - * @mc_addr: the multicast address - * - * Extracts the 12 bits, from a multicast address, to determine which - * bit-vector to set in the multicast table. The hardware uses 12 bits, from - * incoming rx multicast addresses, to determine the bit-vector to check in - * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set - * by the MO field of the MCSTCTRL. The MO field is set during initialization - * to mc_filter_type. - **/ -static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) -{ - u32 vector = 0; - - switch (hw->mac.mc_filter_type) { - case 0: /* use bits [47:36] of the address */ - vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); - break; - case 1: /* use bits [46:35] of the address */ - vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); - break; - case 2: /* use bits [45:34] of the address */ - vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); - break; - case 3: /* use bits [43:32] of the address */ - vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); - break; - default: /* Invalid mc_filter_type */ - hw_dbg(hw, "MC filter type param set incorrectly\n"); - break; - } - - /* vector can only be 12-bits or boundary will be exceeded */ - vector &= 0xFFF; - return vector; -} - -/** - * ixgbe_set_mta - Set bit-vector in multicast table - * @hw: pointer to hardware structure - * @hash_value: Multicast address hash value - * - * Sets the bit-vector in the multicast table. - **/ -void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) -{ - u32 vector; - u32 vector_bit; - u32 vector_reg; - - hw->addr_ctrl.mta_in_use++; - - vector = ixgbe_mta_vector(hw, mc_addr); - hw_dbg(hw, " bit-vector = 0x%03X\n", vector); - - /* - * The MTA is a register array of 128 32-bit registers. It is treated - * like an array of 4096 bits. We want to set bit - * BitArray[vector_value]. So we figure out what register the bit is - * in, read it, OR in the new bit, then write back the new value. The - * register is determined by the upper 7 bits of the vector value and - * the bit within that register are determined by the lower 5 bits of - * the value. - */ - vector_reg = (vector >> 5) & 0x7F; - vector_bit = vector & 0x1F; - hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit); -} - -/** - * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses - * @hw: pointer to hardware structure - * @mc_addr_list: the list of new multicast addresses - * @mc_addr_count: number of addresses - * @next: iterator function to walk the multicast address list - * @clear: flag, when set clears the table beforehand - * - * When the clear flag is set, the given list replaces any existing list. - * Hashes the given addresses into the multicast table. - **/ -s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, ixgbe_mc_addr_itr next, - bool clear) -{ - u32 i; - u32 vmdq; - - /* - * Set the new number of MC addresses that we are being requested to - * use. - */ - hw->addr_ctrl.num_mc_addrs = mc_addr_count; - hw->addr_ctrl.mta_in_use = 0; - - /* Clear mta_shadow */ - if (clear) { - hw_dbg(hw, " Clearing MTA\n"); - memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); - } - - /* Update mta_shadow */ - for (i = 0; i < mc_addr_count; i++) { - hw_dbg(hw, " Adding the multicast addresses:\n"); - ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq)); - } - - /* Enable mta */ - for (i = 0; i < hw->mac.mcft_size; i++) - IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i, - hw->mac.mta_shadow[i]); - - if (hw->addr_ctrl.mta_in_use > 0) - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, - IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); - - hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n"); - return 0; -} - -/** - * ixgbe_enable_mc_generic - Enable multicast address in RAR - * @hw: pointer to hardware structure - * - * Enables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; - - if (a->mta_in_use > 0) - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | - hw->mac.mc_filter_type); - - return 0; -} - -/** - * ixgbe_disable_mc_generic - Disable multicast address in RAR - * @hw: pointer to hardware structure - * - * Disables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; - - if (a->mta_in_use > 0) - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); - - return 0; -} - -/** - * ixgbe_fc_enable_generic - Enable flow control - * @hw: pointer to hardware structure - * - * Enable flow control according to the current settings. - **/ -s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - u32 mflcn_reg, fccfg_reg; - u32 reg; - u32 fcrtl, fcrth; - int i; - - /* Validate the water mark configuration */ - if (!hw->fc.pause_time) { - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - - /* Low water mark of zero causes XOFF floods */ - for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { - if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && - hw->fc.high_water[i]) { - if (!hw->fc.low_water[i] || - hw->fc.low_water[i] >= hw->fc.high_water[i]) { - hw_dbg(hw, "Invalid water mark configuration\n"); - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - } - } - - /* Negotiate the fc mode to use */ - ixgbe_fc_autoneg(hw); - - /* Disable any previous flow control settings */ - mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); - mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE); - - fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG); - fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY); - - /* - * The possible values of fc.current_mode are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but - * we do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. - * other: Invalid. - */ - switch (hw->fc.current_mode) { - case ixgbe_fc_none: - /* - * Flow control is disabled by software override or autoneg. - * The code below will actually disable it in the HW. - */ - break; - case ixgbe_fc_rx_pause: - /* - * Rx Flow control is enabled and Tx Flow control is - * disabled by software override. Since there really - * isn't a way to advertise that we are capable of RX - * Pause ONLY, we will advertise that we support both - * symmetric and asymmetric Rx PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. - */ - mflcn_reg |= IXGBE_MFLCN_RFCE; - break; - case ixgbe_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is - * disabled by software override. - */ - fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; - break; - case ixgbe_fc_full: - /* Flow control (both Rx and Tx) is enabled by SW override. */ - mflcn_reg |= IXGBE_MFLCN_RFCE; - fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; - break; - default: - hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = IXGBE_ERR_CONFIG; - goto out; - break; - } - - /* Set 802.3x based flow control settings. */ - mflcn_reg |= IXGBE_MFLCN_DPF; - IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg); - IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg); - - - /* Set up and enable Rx high/low water mark thresholds, enable XON. */ - for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { - if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && - hw->fc.high_water[i]) { - fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; - IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl); - fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; - } else { - IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); - /* - * In order to prevent Tx hangs when the internal Tx - * switch is enabled we must set the high water mark - * to the maximum FCRTH value. This allows the Tx - * switch to function even under heavy Rx workloads. - */ - fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; - } - - IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth); - } - - /* Configure pause time (2 TCs per register) */ - reg = hw->fc.pause_time * 0x00010001; - for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) - IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); - - /* Configure flow control refresh threshold value */ - IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); - -out: - return ret_val; -} - -/** - * ixgbe_negotiate_fc - Negotiate flow control - * @hw: pointer to hardware structure - * @adv_reg: flow control advertised settings - * @lp_reg: link partner's flow control settings - * @adv_sym: symmetric pause bit in advertisement - * @adv_asm: asymmetric pause bit in advertisement - * @lp_sym: symmetric pause bit in link partner advertisement - * @lp_asm: asymmetric pause bit in link partner advertisement - * - * Find the intersection between advertised settings and link partner's - * advertised settings - **/ -static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, - u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) -{ - if (!adv_reg || !lp_reg) - return IXGBE_ERR_FC_NOT_NEGOTIATED; - - if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { - /* - * Now we need to check if the user selected Rx ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. - */ - if (hw->fc.requested_mode == ixgbe_fc_full) { - hw->fc.current_mode = ixgbe_fc_full; - hw_dbg(hw, "Flow Control = FULL.\n"); - } else { - hw->fc.current_mode = ixgbe_fc_rx_pause; - hw_dbg(hw, "Flow Control=RX PAUSE frames only\n"); - } - } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) && - (lp_reg & lp_sym) && (lp_reg & lp_asm)) { - hw->fc.current_mode = ixgbe_fc_tx_pause; - hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); - } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) && - !(lp_reg & lp_sym) && (lp_reg & lp_asm)) { - hw->fc.current_mode = ixgbe_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); - } else { - hw->fc.current_mode = ixgbe_fc_none; - hw_dbg(hw, "Flow Control = NONE.\n"); - } - return 0; -} - -/** - * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber - * @hw: pointer to hardware structure - * - * Enable flow control according on 1 gig fiber. - **/ -static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) -{ - u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; - s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; - - /* - * On multispeed fiber at 1g, bail out if - * - link is up but AN did not complete, or if - * - link is up and AN completed but timed out - */ - - linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); - if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || - (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) - goto out; - - pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); - pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); - - ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg, - pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE, - IXGBE_PCS1GANA_ASM_PAUSE, - IXGBE_PCS1GANA_SYM_PAUSE, - IXGBE_PCS1GANA_ASM_PAUSE); - -out: - return ret_val; -} - -/** - * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure - * - * Enable flow control according to IEEE clause 37. - **/ -static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) -{ - u32 links2, anlp1_reg, autoc_reg, links; - s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; - - /* - * On backplane, bail out if - * - backplane autoneg was not completed, or if - * - we are 82599 and link partner is not AN enabled - */ - links = IXGBE_READ_REG(hw, IXGBE_LINKS); - if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) - goto out; - - if (hw->mac.type == ixgbe_mac_82599EB) { - links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); - if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) - goto out; - } - /* - * Read the 10g AN autoc and LP ability registers and resolve - * local flow control settings accordingly - */ - autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); - - ret_val = ixgbe_negotiate_fc(hw, autoc_reg, - anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE, - IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE); - -out: - return ret_val; -} - -/** - * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure - * - * Enable flow control according to IEEE clause 37. - **/ -static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) -{ - u16 technology_ability_reg = 0; - u16 lp_technology_ability_reg = 0; - - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &technology_ability_reg); - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_LP, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &lp_technology_ability_reg); - - return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg, - (u32)lp_technology_ability_reg, - IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE, - IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE); -} - -/** - * ixgbe_fc_autoneg - Configure flow control - * @hw: pointer to hardware structure - * - * Compares our advertised flow control capabilities to those advertised by - * our link partner, and determines the proper flow control mode to use. - **/ -void ixgbe_fc_autoneg(struct ixgbe_hw *hw) -{ - s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; - ixgbe_link_speed speed; - bool link_up; - - /* - * AN should have completed when the cable was plugged in. - * Look for reasons to bail out. Bail out if: - * - FC autoneg is disabled, or if - * - link is not up. - */ - if (hw->fc.disable_fc_autoneg) - goto out; - - hw->mac.ops.check_link(hw, &speed, &link_up, false); - if (!link_up) - goto out; - - switch (hw->phy.media_type) { - /* Autoneg flow control on fiber adapters */ - case ixgbe_media_type_fiber: - if (speed == IXGBE_LINK_SPEED_1GB_FULL) - ret_val = ixgbe_fc_autoneg_fiber(hw); - break; - - /* Autoneg flow control on backplane adapters */ - case ixgbe_media_type_backplane: - ret_val = ixgbe_fc_autoneg_backplane(hw); - break; - - /* Autoneg flow control on copper adapters */ - case ixgbe_media_type_copper: - if (ixgbe_device_supports_autoneg_fc(hw) == 0) - ret_val = ixgbe_fc_autoneg_copper(hw); - break; - - default: - break; - } - -out: - if (ret_val == 0) { - hw->fc.fc_was_autonegged = true; - } else { - hw->fc.fc_was_autonegged = false; - hw->fc.current_mode = hw->fc.requested_mode; - } -} - -/** - * ixgbe_disable_pcie_master - Disable PCI-express master access - * @hw: pointer to hardware structure - * - * Disables PCI-Express master access and verifies there are no pending - * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable - * bit hasn't caused the master requests to be disabled, else 0 - * is returned signifying master requests disabled. - **/ -s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) -{ - s32 status = 0; - u32 i; - - /* Always set this bit to ensure any future transactions are blocked */ - IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS); - - /* Exit if master requets are blocked */ - if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) - goto out; - - /* Poll for master request bit to clear */ - for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { - udelay(100); - if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) - goto out; - } - - /* - * Two consecutive resets are required via CTRL.RST per datasheet - * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine - * of this need. The first reset prevents new master requests from - * being issued by our device. We then must wait 1usec or more for any - * remaining completions from the PCIe bus to trickle in, and then reset - * again to clear out any effects they may have had on our device. - */ - hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); - hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; - - /* - * Before proceeding, make sure that the PCIe block does not have - * transactions pending. - */ - for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { - udelay(100); - if (!(IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS) & - IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING)) - goto out; - } - - hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); - status = IXGBE_ERR_MASTER_REQUESTS_PENDING; - -out: - return status; -} - -/** - * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire - * - * Acquires the SWFW semaphore through the GSSR register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) -{ - u32 gssr; - u32 swmask = mask; - u32 fwmask = mask << 5; - s32 timeout = 200; - - while (timeout) { - /* - * SW EEPROM semaphore bit is used for access to all - * SW_FW_SYNC/GSSR bits (not just EEPROM) - */ - if (ixgbe_get_eeprom_semaphore(hw)) - return IXGBE_ERR_SWFW_SYNC; - - gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); - if (!(gssr & (fwmask | swmask))) - break; - - /* - * Firmware currently using resource (fwmask) or other software - * thread currently using resource (swmask) - */ - ixgbe_release_eeprom_semaphore(hw); - msleep(5); - timeout--; - } - - if (!timeout) { - hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); - return IXGBE_ERR_SWFW_SYNC; - } - - gssr |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); - - ixgbe_release_eeprom_semaphore(hw); - return 0; -} - -/** - * ixgbe_release_swfw_sync - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release - * - * Releases the SWFW semaphore through the GSSR register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) -{ - u32 gssr; - u32 swmask = mask; - - ixgbe_get_eeprom_semaphore(hw); - - gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); - gssr &= ~swmask; - IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); - - ixgbe_release_eeprom_semaphore(hw); -} - -/** - * ixgbe_disable_sec_rx_path_generic - Stops the receive data path - * @hw: pointer to hardware structure - * - * Stops the receive data path and waits for the HW to internally empty - * the Rx security block - **/ -s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw) -{ -#define IXGBE_MAX_SECRX_POLL 40 - - int i; - int secrxreg; - - secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); - secrxreg |= IXGBE_SECRXCTRL_RX_DIS; - IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); - for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { - secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); - if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) - break; - else - /* Use interrupt-safe sleep just in case */ - udelay(1000); - } - - /* For informational purposes only */ - if (i >= IXGBE_MAX_SECRX_POLL) - hw_dbg(hw, "Rx unit being enabled before security " - "path fully disabled. Continuing with init.\n"); - - return 0; -} - -/** - * ixgbe_enable_sec_rx_path_generic - Enables the receive data path - * @hw: pointer to hardware structure - * - * Enables the receive data path. - **/ -s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw) -{ - int secrxreg; - - secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); - secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; - IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL - * - * Enables the Rx DMA unit - **/ -s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) -{ - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); - - return 0; -} - -/** - * ixgbe_blink_led_start_generic - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink - **/ -s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) -{ - ixgbe_link_speed speed = 0; - bool link_up = 0; - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* - * Link must be up to auto-blink the LEDs; - * Force it if link is down. - */ - hw->mac.ops.check_link(hw, &speed, &link_up, false); - - if (!link_up) { - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - autoc_reg |= IXGBE_AUTOC_FLU; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - IXGBE_WRITE_FLUSH(hw); - msleep(10); - } - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking - **/ -s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - autoc_reg &= ~IXGBE_AUTOC_FLU; - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg &= ~IXGBE_LED_BLINK(index); - led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM - * @hw: pointer to hardware structure - * @san_mac_offset: SAN MAC address offset - * - * This function will read the EEPROM location for the SAN MAC address - * pointer, and returns the value at that location. This is used in both - * get and set mac_addr routines. - **/ -static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, - u16 *san_mac_offset) -{ - /* - * First read the EEPROM pointer to see if the MAC addresses are - * available. - */ - hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); - - return 0; -} - -/** - * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Reads the SAN MAC address from the EEPROM, if it's available. This is - * per-port, so set_lan_id() must be called before reading the addresses. - * set_lan_id() is called by identify_sfp(), but this cannot be relied - * upon for non-SFP connections, so we must call it here. - **/ -s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - u16 san_mac_data, san_mac_offset; - u8 i; - - /* - * First read the EEPROM pointer to see if the MAC addresses are - * available. If they're not, no point in calling set_lan_id() here. - */ - ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); - - if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { - /* - * No addresses available in this EEPROM. It's not an - * error though, so just wipe the local address and return. - */ - for (i = 0; i < 6; i++) - san_mac_addr[i] = 0xFF; - - goto san_mac_addr_out; - } - - /* make sure we know which port we need to program */ - hw->mac.ops.set_lan_id(hw); - /* apply the port offset to the address offset */ - (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : - (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); - for (i = 0; i < 3; i++) { - hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); - san_mac_addr[i * 2] = (u8)(san_mac_data); - san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); - san_mac_offset++; - } - -san_mac_addr_out: - return 0; -} - -/** - * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Write a SAN MAC address to the EEPROM. - **/ -s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - s32 status = 0; - u16 san_mac_data, san_mac_offset; - u8 i; - - /* Look for SAN mac address pointer. If not defined, return */ - ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); - - if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { - status = IXGBE_ERR_NO_SAN_ADDR_PTR; - goto san_mac_addr_out; - } - - /* Make sure we know which port we need to write */ - hw->mac.ops.set_lan_id(hw); - /* Apply the port offset to the address offset */ - (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : - (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); - - for (i = 0; i < 3; i++) { - san_mac_data = (u16)((u16)(san_mac_addr[i * 2 + 1]) << 8); - san_mac_data |= (u16)(san_mac_addr[i * 2]); - hw->eeprom.ops.write(hw, san_mac_offset, san_mac_data); - san_mac_offset++; - } - -san_mac_addr_out: - return status; -} - -/** - * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count - * @hw: pointer to hardware structure - * - * Read PCIe configuration space, and get the MSI-X vector count from - * the capabilities table. - **/ -u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) -{ - u16 msix_count = 1; - u16 max_msix_count; - u16 pcie_offset; - - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS; - max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598; - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS; - max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599; - break; - default: - return msix_count; - } - - msix_count = IXGBE_READ_PCIE_WORD(hw, pcie_offset); - msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; - - /* MSI-X count is zero-based in HW */ - msix_count++; - - if (msix_count > max_msix_count) - msix_count = max_msix_count; - - return msix_count; -} - -/** - * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address - * @hw: pointer to hardware structure - * @addr: Address to put into receive address register - * @vmdq: VMDq pool to assign - * - * Puts an ethernet address into a receive address register, or - * finds the rar that it is already in; adds to the pool list - **/ -s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) -{ - static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF; - u32 first_empty_rar = NO_EMPTY_RAR_FOUND; - u32 rar; - u32 rar_low, rar_high; - u32 addr_low, addr_high; - - /* swap bytes for HW little endian */ - addr_low = addr[0] | (addr[1] << 8) - | (addr[2] << 16) - | (addr[3] << 24); - addr_high = addr[4] | (addr[5] << 8); - - /* - * Either find the mac_id in rar or find the first empty space. - * rar_highwater points to just after the highest currently used - * rar in order to shorten the search. It grows when we add a new - * rar to the top. - */ - for (rar = 0; rar < hw->mac.rar_highwater; rar++) { - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); - - if (((IXGBE_RAH_AV & rar_high) == 0) - && first_empty_rar == NO_EMPTY_RAR_FOUND) { - first_empty_rar = rar; - } else if ((rar_high & 0xFFFF) == addr_high) { - rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(rar)); - if (rar_low == addr_low) - break; /* found it already in the rars */ - } - } - - if (rar < hw->mac.rar_highwater) { - /* already there so just add to the pool bits */ - ixgbe_set_vmdq(hw, rar, vmdq); - } else if (first_empty_rar != NO_EMPTY_RAR_FOUND) { - /* stick it into first empty RAR slot we found */ - rar = first_empty_rar; - ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); - } else if (rar == hw->mac.rar_highwater) { - /* add it to the top of the list and inc the highwater mark */ - ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); - hw->mac.rar_highwater++; - } else if (rar >= hw->mac.num_rar_entries) { - return IXGBE_ERR_INVALID_MAC_ADDR; - } - - /* - * If we found rar[0], make sure the default pool bit (we use pool 0) - * remains cleared to be sure default pool packets will get delivered - */ - if (rar == 0) - ixgbe_clear_vmdq(hw, rar, 0); - - return rar; -} - -/** - * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to disassociate - * @vmdq: VMDq pool index to remove from the rar - **/ -s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 mpsar_lo, mpsar_hi; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (rar >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - - if (!mpsar_lo && !mpsar_hi) - goto done; - - if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { - if (mpsar_lo) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); - mpsar_lo = 0; - } - if (mpsar_hi) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); - mpsar_hi = 0; - } - } else if (vmdq < 32) { - mpsar_lo &= ~(1 << vmdq); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); - } else { - mpsar_hi &= ~(1 << (vmdq - 32)); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); - } - - /* was that the last pool using this rar? */ - if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) - hw->mac.ops.clear_rar(hw, rar); -done: - return 0; -} - -/** - * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq pool index - **/ -s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 mpsar; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (rar >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - if (vmdq < 32) { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar |= 1 << vmdq; - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); - } else { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - mpsar |= 1 << (vmdq - 32); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); - } - return 0; -} - -/** - * This function should only be involved in the IOV mode. - * In IOV mode, Default pool is next pool after the number of - * VFs advertized and not 0. - * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index] - * - * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address - * @hw: pointer to hardware struct - * @vmdq: VMDq pool index - **/ -s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) -{ - u32 mpsar; - u32 rar = hw->mac.san_mac_rar_index; - - if (vmdq < 32) { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar |= 1 << vmdq; - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); - } else { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - mpsar |= 1 << (vmdq - 32); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); - } - - return 0; -} - -/** - * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array - * @hw: pointer to hardware structure - **/ -s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) -{ - int i; - - hw_dbg(hw, " Clearing UTA\n"); - - for (i = 0; i < 128; i++) - IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); - - return 0; -} - -/** - * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * - * return the VLVF index where this VLAN id should be placed - * - **/ -s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) -{ - u32 bits = 0; - u32 first_empty_slot = 0; - s32 regindex; - - /* short cut the special case */ - if (vlan == 0) - return 0; - - /* - * Search for the vlan id in the VLVF entries. Save off the first empty - * slot found along the way - */ - for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { - bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); - if (!bits && !(first_empty_slot)) - first_empty_slot = regindex; - else if ((bits & 0x0FFF) == vlan) - break; - } - - /* - * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan - * in the VLVF. Else use the first empty VLVF register for this - * vlan id. - */ - if (regindex >= IXGBE_VLVF_ENTRIES) { - if (first_empty_slot) - regindex = first_empty_slot; - else { - hw_dbg(hw, "No space in VLVF.\n"); - regindex = IXGBE_ERR_NO_SPACE; - } - } - - return regindex; -} - -/** - * ixgbe_set_vfta_generic - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFVFB - * @vlan_on: boolean flag to turn on/off VLAN in VFVF - * - * Turn on/off specified VLAN in the VLAN filter table. - **/ -s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on) -{ - s32 regindex; - u32 bitindex; - u32 vfta; - u32 targetbit; - s32 ret_val = 0; - bool vfta_changed = false; - - if (vlan > 4095) - return IXGBE_ERR_PARAM; - - /* - * this is a 2 part operation - first the VFTA, then the - * VLVF and VLVFB if VT Mode is set - * We don't write the VFTA until we know the VLVF part succeeded. - */ - - /* Part 1 - * The VFTA is a bitstring made up of 128 32-bit registers - * that enable the particular VLAN id, much like the MTA: - * bits[11-5]: which register - * bits[4-0]: which bit in the register - */ - regindex = (vlan >> 5) & 0x7F; - bitindex = vlan & 0x1F; - targetbit = (1 << bitindex); - vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); - - if (vlan_on) { - if (!(vfta & targetbit)) { - vfta |= targetbit; - vfta_changed = true; - } - } else { - if (vfta & targetbit) { - vfta &= ~targetbit; - vfta_changed = true; - } - } - - /* Part 2 - * Call ixgbe_set_vlvf_generic to set VLVFB and VLVF - */ - ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on, - &vfta_changed); - if (ret_val != 0) - return ret_val; - - if (vfta_changed) - IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); - - return 0; -} - -/** - * ixgbe_set_vlvf_generic - Set VLAN Pool Filter - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFVFB - * @vlan_on: boolean flag to turn on/off VLAN in VFVF - * @vfta_changed: pointer to boolean flag which indicates whether VFTA - * should be changed - * - * Turn on/off specified bit in VLVF table. - **/ -s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on, bool *vfta_changed) -{ - u32 vt; - - if (vlan > 4095) - return IXGBE_ERR_PARAM; - - /* If VT Mode is set - * Either vlan_on - * make sure the vlan is in VLVF - * set the vind bit in the matching VLVFB - * Or !vlan_on - * clear the pool bit and possibly the vind - */ - vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); - if (vt & IXGBE_VT_CTL_VT_ENABLE) { - s32 vlvf_index; - u32 bits; - - vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); - if (vlvf_index < 0) - return vlvf_index; - - if (vlan_on) { - /* set the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index * 2)); - bits |= (1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index * 2), - bits); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1)); - bits |= (1 << (vind - 32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1), - bits); - } - } else { - /* clear the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index * 2)); - bits &= ~(1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index * 2), - bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1)); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1)); - bits &= ~(1 << (vind - 32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1), - bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index * 2)); - } - } - - /* - * If there are still bits set in the VLVFB registers - * for the VLAN ID indicated we need to see if the - * caller is requesting that we clear the VFTA entry bit. - * If the caller has requested that we clear the VFTA - * entry bit but there are still pools/VFs using this VLAN - * ID entry then ignore the request. We're not worried - * about the case where we're turning the VFTA VLAN ID - * entry bit on, only when requested to turn it off as - * there may be multiple pools and/or VFs using the - * VLAN ID entry. In that case we cannot clear the - * VFTA bit until all pools/VFs using that VLAN ID have also - * been cleared. This will be indicated by "bits" being - * zero. - */ - if (bits) { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), - (IXGBE_VLVF_VIEN | vlan)); - if (!vlan_on && (vfta_changed != NULL)) { - /* someone wants to clear the vfta entry - * but some pools/VFs are still using it. - * Ignore it. */ - *vfta_changed = false; - } - } else - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); - } - - return 0; -} - -/** - * ixgbe_clear_vfta_generic - Clear VLAN filter table - * @hw: pointer to hardware structure - * - * Clears the VLAN filer table, and the VMDq index associated with the filter - **/ -s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) -{ - u32 offset; - - for (offset = 0; offset < hw->mac.vft_size; offset++) - IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); - - for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0); - } - - return 0; -} - -/** - * ixgbe_check_mac_link_generic - Determine link and speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true when link is up - * @link_up_wait_to_complete: bool used to wait for link up or not - * - * Reads the links register to determine if link is up and the current speed - **/ -s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete) -{ - u32 links_reg, links_orig; - u32 i; - - /* clear the old state */ - links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS); - - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - - if (links_orig != links_reg) { - hw_dbg(hw, "LINKS changed from %08X to %08X\n", - links_orig, links_reg); - } - - if (link_up_wait_to_complete) { - for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { - if (links_reg & IXGBE_LINKS_UP) { - *link_up = true; - break; - } else { - *link_up = false; - } - msleep(100); - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - } - } else { - if (links_reg & IXGBE_LINKS_UP) - *link_up = true; - else - *link_up = false; - } - - if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_10G_82599) - *speed = IXGBE_LINK_SPEED_10GB_FULL; - else if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_1G_82599) - *speed = IXGBE_LINK_SPEED_1GB_FULL; - else if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_100_82599) - *speed = IXGBE_LINK_SPEED_100_FULL; - else - *speed = IXGBE_LINK_SPEED_UNKNOWN; - - return 0; -} - -/** - * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from - * the EEPROM - * @hw: pointer to hardware structure - * @wwnn_prefix: the alternative WWNN prefix - * @wwpn_prefix: the alternative WWPN prefix - * - * This function will read the EEPROM from the alternative SAN MAC address - * block to check the support for the alternative WWNN/WWPN prefix support. - **/ -s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix) -{ - u16 offset, caps; - u16 alt_san_mac_blk_offset; - - /* clear output first */ - *wwnn_prefix = 0xFFFF; - *wwpn_prefix = 0xFFFF; - - /* check if alternative SAN MAC is supported */ - hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, - &alt_san_mac_blk_offset); - - if ((alt_san_mac_blk_offset == 0) || - (alt_san_mac_blk_offset == 0xFFFF)) - goto wwn_prefix_out; - - /* check capability in alternative san mac address block */ - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; - hw->eeprom.ops.read(hw, offset, &caps); - if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) - goto wwn_prefix_out; - - /* get the corresponding prefix for WWNN/WWPN */ - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwnn_prefix); - - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwpn_prefix); - -wwn_prefix_out: - return 0; -} - -/** - * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM - * @hw: pointer to hardware structure - * @bs: the fcoe boot status - * - * This function will read the FCOE boot status from the iSCSI FCOE block - **/ -s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs) -{ - u16 offset, caps, flags; - s32 status; - - /* clear output first */ - *bs = ixgbe_fcoe_bootstatus_unavailable; - - /* check if FCOE IBA block is present */ - offset = IXGBE_FCOE_IBA_CAPS_BLK_PTR; - status = hw->eeprom.ops.read(hw, offset, &caps); - if (status != 0) - goto out; - - if (!(caps & IXGBE_FCOE_IBA_CAPS_FCOE)) - goto out; - - /* check if iSCSI FCOE block is populated */ - status = hw->eeprom.ops.read(hw, IXGBE_ISCSI_FCOE_BLK_PTR, &offset); - if (status != 0) - goto out; - - if ((offset == 0) || (offset == 0xFFFF)) - goto out; - - /* read fcoe flags in iSCSI FCOE block */ - offset = offset + IXGBE_ISCSI_FCOE_FLAGS_OFFSET; - status = hw->eeprom.ops.read(hw, offset, &flags); - if (status != 0) - goto out; - - if (flags & IXGBE_ISCSI_FCOE_FLAGS_ENABLE) - *bs = ixgbe_fcoe_bootstatus_enabled; - else - *bs = ixgbe_fcoe_bootstatus_disabled; - -out: - return status; -} - -/** - * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for anti-spoofing - * @pf: Physical Function pool - do not enable anti-spoofing for the PF - * - **/ -void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf) -{ - int j; - int pf_target_reg = pf >> 3; - int pf_target_shift = pf % 8; - u32 pfvfspoof = 0; - - if (hw->mac.type == ixgbe_mac_82598EB) - return; - - if (enable) - pfvfspoof = IXGBE_SPOOF_MACAS_MASK; - - /* - * PFVFSPOOF register array is size 8 with 8 bits assigned to - * MAC anti-spoof enables in each register array element. - */ - for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++) - IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof); - - /* If not enabling anti-spoofing then done */ - if (!enable) - return; - - /* - * The PF should be allowed to spoof so that it can support - * emulation mode NICs. Reset the bit assigned to the PF - */ - pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg)); - pfvfspoof ^= (1 << pf_target_shift); - IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof); -} - -/** - * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for VLAN anti-spoofing - * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing - * - **/ -void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) -{ - int vf_target_reg = vf >> 3; - int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT; - u32 pfvfspoof; - - if (hw->mac.type == ixgbe_mac_82598EB) - return; - - pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); - if (enable) - pfvfspoof |= (1 << vf_target_shift); - else - pfvfspoof &= ~(1 << vf_target_shift); - IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); -} - -/** - * ixgbe_get_device_caps_generic - Get additional device capabilities - * @hw: pointer to hardware structure - * @device_caps: the EEPROM word with the extra device capabilities - * - * This function will read the EEPROM location for the device capabilities, - * and return the word through device_caps. - **/ -s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) -{ - hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); - - return 0; -} - -/** - * ixgbe_calculate_checksum - Calculate checksum for buffer - * @buffer: pointer to EEPROM - * @length: size of EEPROM to calculate a checksum for - * Calculates the checksum for some buffer on a specified length. The - * checksum calculated is returned. - **/ -static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) -{ - u32 i; - u8 sum = 0; - - if (!buffer) - return 0; - for (i = 0; i < length; i++) - sum += buffer[i]; - - return (u8) (0 - sum); -} - -/** - * ixgbe_host_interface_command - Issue command to manageability block - * @hw: pointer to the HW structure - * @buffer: contains the command to write and where the return status will - * be placed - * @length: length of buffer, must be multiple of 4 bytes - * - * Communicates with the manageability block. On success return 0 - * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. - **/ -static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, - u32 length) -{ - u32 hicr, i, bi; - u32 hdr_size = sizeof(struct ixgbe_hic_hdr); - u8 buf_len, dword_len; - - s32 ret_val = 0; - - if (length == 0 || length & 0x3 || - length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { - hw_dbg(hw, "Buffer length failure.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Check that the host interface is enabled. */ - hicr = IXGBE_READ_REG(hw, IXGBE_HICR); - if ((hicr & IXGBE_HICR_EN) == 0) { - hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Calculate length in DWORDs */ - dword_len = length >> 2; - - /* - * The device driver writes the relevant command block - * into the ram area. - */ - for (i = 0; i < dword_len; i++) - IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG, - i, IXGBE_CPU_TO_LE32(buffer[i])); - - /* Setting this bit tells the ARC that a new command is pending. */ - IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C); - - for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) { - hicr = IXGBE_READ_REG(hw, IXGBE_HICR); - if (!(hicr & IXGBE_HICR_C)) - break; - msleep(1); - } - - /* Check command successful completion. */ - if (i == IXGBE_HI_COMMAND_TIMEOUT || - (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { - hw_dbg(hw, "Command has failed with no status valid.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Calculate length in DWORDs */ - dword_len = hdr_size >> 2; - - /* first pull in the header so we know the buffer length */ - for (bi = 0; bi < dword_len; bi++) { - buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); - IXGBE_LE32_TO_CPUS(&buffer[bi]); - } - - /* If there is any thing in data position pull it in */ - buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len; - if (buf_len == 0) - goto out; - - if (length < (buf_len + hdr_size)) { - hw_dbg(hw, "Buffer not large enough for reply message.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Calculate length in DWORDs, add 3 for odd lengths */ - dword_len = (buf_len + 3) >> 2; - - /* Pull in the rest of the buffer (bi is where we left off)*/ - for (; bi <= dword_len; bi++) { - buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); - IXGBE_LE32_TO_CPUS(&buffer[bi]); - } - -out: - return ret_val; -} - -/** - * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware - * @hw: pointer to the HW structure - * @maj: driver version major number - * @min: driver version minor number - * @build: driver version build number - * @sub: driver version sub build number - * - * Sends driver version number to firmware through the manageability - * block. On success return 0 - * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. - **/ -s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, - u8 build, u8 sub) -{ - struct ixgbe_hic_drv_info fw_cmd; - int i; - s32 ret_val = 0; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) - != 0) { - ret_val = IXGBE_ERR_SWFW_SYNC; - goto out; - } - - fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; - fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; - fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; - fw_cmd.port_num = (u8)hw->bus.func; - fw_cmd.ver_maj = maj; - fw_cmd.ver_min = min; - fw_cmd.ver_build = build; - fw_cmd.ver_sub = sub; - fw_cmd.hdr.checksum = 0; - fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, - (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); - fw_cmd.pad = 0; - fw_cmd.pad2 = 0; - - for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { - ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, - sizeof(fw_cmd)); - if (ret_val != 0) - continue; - - if (fw_cmd.hdr.cmd_or_resp.ret_status == - FW_CEM_RESP_STATUS_SUCCESS) - ret_val = 0; - else - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - - break; - } - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM); -out: - return ret_val; -} - -/** - * ixgbe_set_rxpba_generic - Initialize Rx packet buffer - * @hw: pointer to hardware structure - * @num_pb: number of packet buffers to allocate - * @headroom: reserve n KB of headroom - * @strategy: packet buffer allocation strategy - **/ -void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom, - int strategy) -{ - u32 pbsize = hw->mac.rx_pb_size; - int i = 0; - u32 rxpktsize, txpktsize, txpbthresh; - - /* Reserve headroom */ - pbsize -= headroom; - - if (!num_pb) - num_pb = 1; - - /* Divide remaining packet buffer space amongst the number of packet - * buffers requested using supplied strategy. - */ - switch (strategy) { - case PBA_STRATEGY_WEIGHTED: - /* ixgbe_dcb_pba_80_48 strategy weight first half of packet - * buffer with 5/8 of the packet buffer space. - */ - rxpktsize = (pbsize * 5) / (num_pb * 4); - pbsize -= rxpktsize * (num_pb / 2); - rxpktsize <<= IXGBE_RXPBSIZE_SHIFT; - for (; i < (num_pb / 2); i++) - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); - /* Fall through to configure remaining packet buffers */ - case PBA_STRATEGY_EQUAL: - rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT; - for (; i < num_pb; i++) - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); - break; - default: - break; - } - - /* Only support an equally distributed Tx packet buffer strategy. */ - txpktsize = IXGBE_TXPBSIZE_MAX / num_pb; - txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX; - for (i = 0; i < num_pb; i++) { - IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize); - IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh); - } - - /* Clear unused TCs, if any, to zero buffer size*/ - for (; i < IXGBE_MAX_PB; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0); - } -} - -/** - * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo - * @hw: pointer to the hardware structure - * - * The 82599 and x540 MACs can experience issues if TX work is still pending - * when a reset occurs. This function prevents this by flushing the PCIe - * buffers on the system. - **/ -void ixgbe_clear_tx_pending(struct ixgbe_hw *hw) -{ - u32 gcr_ext, hlreg0; - - /* - * If double reset is not requested then all transactions should - * already be clear and as such there is no work to do - */ - if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED)) - return; - - /* - * Set loopback enable to prevent any transmits from being sent - * should the link come up. This assumes that the RXCTRL.RXEN bit - * has already been cleared. - */ - hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); - IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK); - - /* initiate cleaning flow for buffers in the PCIe transaction layer */ - gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); - IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, - gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR); - - /* Flush all writes and allow 20usec for all transactions to clear */ - IXGBE_WRITE_FLUSH(hw); - udelay(20); - - /* restore previous register values */ - IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); - IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); -} - -static const u8 ixgbe_emc_temp_data[4] = { - IXGBE_EMC_INTERNAL_DATA, - IXGBE_EMC_DIODE1_DATA, - IXGBE_EMC_DIODE2_DATA, - IXGBE_EMC_DIODE3_DATA -}; -static const u8 ixgbe_emc_therm_limit[4] = { - IXGBE_EMC_INTERNAL_THERM_LIMIT, - IXGBE_EMC_DIODE1_THERM_LIMIT, - IXGBE_EMC_DIODE2_THERM_LIMIT, - IXGBE_EMC_DIODE3_THERM_LIMIT -}; - -/** - * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data - * @hw: pointer to hardware structure - * @data: pointer to the thermal sensor data structure - * - * Returns the thermal sensor data structure - **/ -s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) -{ - s32 status = 0; - u16 ets_offset; - u16 ets_cfg; - u16 ets_sensor; - u8 num_sensors; - u8 sensor_index; - u8 sensor_location; - u8 i; - struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; - - /* Only support thermal sensors attached to 82599 physical port 0 */ - if ((hw->mac.type != ixgbe_mac_82599EB) || - (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) { - status = IXGBE_NOT_IMPLEMENTED; - goto out; - } - - status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset); - if (status) - goto out; - - if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) { - status = IXGBE_NOT_IMPLEMENTED; - goto out; - } - - status = hw->eeprom.ops.read(hw, ets_offset, &ets_cfg); - if (status) - goto out; - - if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT) - != IXGBE_ETS_TYPE_EMC) { - status = IXGBE_NOT_IMPLEMENTED; - goto out; - } - - num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); - if (num_sensors > IXGBE_MAX_SENSORS) - num_sensors = IXGBE_MAX_SENSORS; - - for (i = 0; i < num_sensors; i++) { - status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i), - &ets_sensor); - if (status) - goto out; - - sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> - IXGBE_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> - IXGBE_ETS_DATA_LOC_SHIFT); - - if (sensor_location != 0) { - status = hw->phy.ops.read_i2c_byte(hw, - ixgbe_emc_temp_data[sensor_index], - IXGBE_I2C_THERMAL_SENSOR_ADDR, - &data->sensor[i].temp); - if (status) - goto out; - } - } -out: - return status; -} - -/** - * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds - * @hw: pointer to hardware structure - * - * Inits the thermal sensor thresholds according to the NVM map - * and save off the threshold and location values into mac.thermal_sensor_data - **/ -s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) -{ - s32 status = 0; - u16 ets_offset; - u16 ets_cfg; - u16 ets_sensor; - u8 low_thresh_delta; - u8 num_sensors; - u8 sensor_index; - u8 sensor_location; - u8 therm_limit; - u8 i; - struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; - - memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data)); - - /* Only support thermal sensors attached to 82599 physical port 0 */ - if ((hw->mac.type != ixgbe_mac_82599EB) || - (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) - return IXGBE_NOT_IMPLEMENTED; - - hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset); - if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) - return IXGBE_NOT_IMPLEMENTED; - - hw->eeprom.ops.read(hw, ets_offset, &ets_cfg); - if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT) - != IXGBE_ETS_TYPE_EMC) - return IXGBE_NOT_IMPLEMENTED; - - low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >> - IXGBE_ETS_LTHRES_DELTA_SHIFT); - num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); - - for (i = 0; i < num_sensors; i++) { - hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor); - sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> - IXGBE_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> - IXGBE_ETS_DATA_LOC_SHIFT); - therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK; - - hw->phy.ops.write_i2c_byte(hw, - ixgbe_emc_therm_limit[sensor_index], - IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit); - - if ((i < IXGBE_MAX_SENSORS) && (sensor_location != 0)) { - data->sensor[i].location = sensor_location; - data->sensor[i].caution_thresh = therm_limit; - data->sensor[i].max_op_thresh = therm_limit - - low_thresh_delta; - } - } - return status; -} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h deleted file mode 100644 index 2989a80b34..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h +++ /dev/null @@ -1,125 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_COMMON_H_ -#define _IXGBE_COMMON_H_ - -#include "ixgbe_type.h" - -u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw); - -s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw); -s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw); -s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw); -s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw); -s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw); -s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, - u32 pba_num_size); -s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr); -s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw); -void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw); -s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw); - -s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index); - -s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw); -s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data); -s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); -s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data); -s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 *data); -s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw); -s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, - u16 *checksum_val); -s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw); -s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); - -s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, - u32 enable_addr); -s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw); -s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, - ixgbe_mc_addr_itr func, bool clear); -s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, - u32 addr_count, ixgbe_mc_addr_itr func); -s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw); -s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw); -s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval); -s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw); -s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw); - -s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw); -void ixgbe_fc_autoneg(struct ixgbe_hw *hw); - -s32 ixgbe_validate_mac_addr(u8 *mac_addr); -s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask); -void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask); -s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); - -s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index); - -s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr); -s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr); - -s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); -s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq); -s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); -s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); -s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw); -s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, - u32 vind, bool vlan_on); -s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on, bool *vfta_changed); -s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw); -s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan); - -s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete); - -s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix); - -s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs); -void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf); -void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf); -s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps); -void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom, - int strategy); -s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, - u8 build, u8 ver); -void ixgbe_clear_tx_pending(struct ixgbe_hw *hw); - -#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8 -#define IXGBE_EMC_INTERNAL_DATA 0x00 -#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20 -#define IXGBE_EMC_DIODE1_DATA 0x01 -#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19 -#define IXGBE_EMC_DIODE2_DATA 0x23 -#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A -#define IXGBE_EMC_DIODE3_DATA 0x2A -#define IXGBE_EMC_DIODE3_THERM_LIMIT 0x30 - -s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw); -s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw); -#endif /* IXGBE_COMMON */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h deleted file mode 100644 index e9a099d53f..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h +++ /dev/null @@ -1,153 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_DCB_H_ -#define _IXGBE_DCB_H_ - - -#include "ixgbe_type.h" - -/* DCB defines */ -/* DCB credit calculation defines */ -#define IXGBE_DCB_CREDIT_QUANTUM 64 -#define IXGBE_DCB_MAX_CREDIT_REFILL 200 /* 200 * 64B = 12800B */ -#define IXGBE_DCB_MAX_TSO_SIZE (32 * 1024) /* Max TSO pkt size in DCB*/ -#define IXGBE_DCB_MAX_CREDIT (2 * IXGBE_DCB_MAX_CREDIT_REFILL) - -/* 513 for 32KB TSO packet */ -#define IXGBE_DCB_MIN_TSO_CREDIT \ - ((IXGBE_DCB_MAX_TSO_SIZE / IXGBE_DCB_CREDIT_QUANTUM) + 1) - -/* DCB configuration defines */ -#define IXGBE_DCB_MAX_USER_PRIORITY 8 -#define IXGBE_DCB_MAX_BW_GROUP 8 -#define IXGBE_DCB_BW_PERCENT 100 - -#define IXGBE_DCB_TX_CONFIG 0 -#define IXGBE_DCB_RX_CONFIG 1 - -/* DCB capability defines */ -#define IXGBE_DCB_PG_SUPPORT 0x00000001 -#define IXGBE_DCB_PFC_SUPPORT 0x00000002 -#define IXGBE_DCB_BCN_SUPPORT 0x00000004 -#define IXGBE_DCB_UP2TC_SUPPORT 0x00000008 -#define IXGBE_DCB_GSP_SUPPORT 0x00000010 - -struct ixgbe_dcb_support { - u32 capabilities; /* DCB capabilities */ - - /* Each bit represents a number of TCs configurable in the hw. - * If 8 traffic classes can be configured, the value is 0x80. */ - u8 traffic_classes; - u8 pfc_traffic_classes; -}; - -enum ixgbe_dcb_tsa { - ixgbe_dcb_tsa_ets = 0, - ixgbe_dcb_tsa_group_strict_cee, - ixgbe_dcb_tsa_strict -}; - -/* Traffic class bandwidth allocation per direction */ -struct ixgbe_dcb_tc_path { - u8 bwg_id; /* Bandwidth Group (BWG) ID */ - u8 bwg_percent; /* % of BWG's bandwidth */ - u8 link_percent; /* % of link bandwidth */ - u8 up_to_tc_bitmap; /* User Priority to Traffic Class mapping */ - u16 data_credits_refill; /* Credit refill amount in 64B granularity */ - u16 data_credits_max; /* Max credits for a configured packet buffer - * in 64B granularity.*/ - enum ixgbe_dcb_tsa tsa; /* Link or Group Strict Priority */ -}; - -enum ixgbe_dcb_pfc { - ixgbe_dcb_pfc_disabled = 0, - ixgbe_dcb_pfc_enabled, - ixgbe_dcb_pfc_enabled_txonly, - ixgbe_dcb_pfc_enabled_rxonly -}; - -/* Traffic class configuration */ -struct ixgbe_dcb_tc_config { - struct ixgbe_dcb_tc_path path[2]; /* One each for Tx/Rx */ - enum ixgbe_dcb_pfc pfc; /* Class based flow control setting */ - - u16 desc_credits_max; /* For Tx Descriptor arbitration */ - u8 tc; /* Traffic class (TC) */ -}; - -enum ixgbe_dcb_pba { - /* PBA[0-7] each use 64KB FIFO */ - ixgbe_dcb_pba_equal = PBA_STRATEGY_EQUAL, - /* PBA[0-3] each use 80KB, PBA[4-7] each use 48KB */ - ixgbe_dcb_pba_80_48 = PBA_STRATEGY_WEIGHTED -}; - -struct ixgbe_dcb_num_tcs { - u8 pg_tcs; - u8 pfc_tcs; -}; - -struct ixgbe_dcb_config { - struct ixgbe_dcb_tc_config tc_config[IXGBE_DCB_MAX_TRAFFIC_CLASS]; - struct ixgbe_dcb_support support; - struct ixgbe_dcb_num_tcs num_tcs; - u8 bw_percentage[2][IXGBE_DCB_MAX_BW_GROUP]; /* One each for Tx/Rx */ - bool pfc_mode_enable; - bool round_robin_enable; - - enum ixgbe_dcb_pba rx_pba_cfg; - - u32 dcb_cfg_version; /* Not used...OS-specific? */ - u32 link_speed; /* For bandwidth allocation validation purpose */ - bool vt_mode; -}; - -/* DCB driver APIs */ - -/* DCB rule checking */ -s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *); - -/* DCB credits calculation */ -s32 ixgbe_dcb_calculate_tc_credits(u8 *, u16 *, u16 *, int); -s32 ixgbe_dcb_calculate_tc_credits_cee(struct ixgbe_hw *, - struct ixgbe_dcb_config *, u32, u8); - -/* DCB PFC */ -s32 ixgbe_dcb_config_pfc(struct ixgbe_hw *, u8, u8 *); -s32 ixgbe_dcb_config_pfc_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *); - -/* DCB stats */ -s32 ixgbe_dcb_config_tc_stats(struct ixgbe_hw *); -s32 ixgbe_dcb_get_tc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8); -s32 ixgbe_dcb_get_pfc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8); - -/* DCB config arbiters */ -s32 ixgbe_dcb_config_tx_desc_arbiter_cee(struct ixgbe_hw *, - struct ixgbe_dcb_config *); -s32 ixgbe_dcb_config_tx_data_arbiter_cee(struct ixgbe_hw *, - struct ixgbe_dcb_config *); -s32 ixgbe_dcb_config_rx_arbiter_cee(struct ixgbe_hw *, - struct ixgbe_dcb_config *); - -/* DCB unpack routines */ -void ixgbe_dcb_unpack_pfc_cee(struct ixgbe_dcb_config *, u8 *, u8 *); -void ixgbe_dcb_unpack_refill_cee(struct ixgbe_dcb_config *, int, u16 *); -void ixgbe_dcb_unpack_max_cee(struct ixgbe_dcb_config *, u16 *); -void ixgbe_dcb_unpack_bwgid_cee(struct ixgbe_dcb_config *, int, u8 *); -void ixgbe_dcb_unpack_tsa_cee(struct ixgbe_dcb_config *, int, u8 *); -void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *, int, u8 *); - -/* DCB initialization */ -s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, u16 *, u16 *, u8 *, u8 *, u8 *); -s32 ixgbe_dcb_hw_config_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *); -#endif /* _IXGBE_DCB_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c deleted file mode 100644 index f2ded19e90..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c +++ /dev/null @@ -1,2894 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/* ethtool support for ixgbe */ - -#include -#include -#include -#include -#include -#include -#include -#ifdef SIOCETHTOOL -#include - -#include "ixgbe.h" - -#ifndef ETH_GSTRING_LEN -#define ETH_GSTRING_LEN 32 -#endif - -#define IXGBE_ALL_RAR_ENTRIES 16 - -#ifdef ETHTOOL_OPS_COMPAT -#include "kcompat_ethtool.c" -#endif -#ifdef ETHTOOL_GSTATS -struct ixgbe_stats { - char stat_string[ETH_GSTRING_LEN]; - int sizeof_stat; - int stat_offset; -}; - -#define IXGBE_NETDEV_STAT(_net_stat) { \ - .stat_string = #_net_stat, \ - .sizeof_stat = FIELD_SIZEOF(struct net_device_stats, _net_stat), \ - .stat_offset = offsetof(struct net_device_stats, _net_stat) \ -} -static const struct ixgbe_stats ixgbe_gstrings_net_stats[] = { - IXGBE_NETDEV_STAT(rx_packets), - IXGBE_NETDEV_STAT(tx_packets), - IXGBE_NETDEV_STAT(rx_bytes), - IXGBE_NETDEV_STAT(tx_bytes), - IXGBE_NETDEV_STAT(rx_errors), - IXGBE_NETDEV_STAT(tx_errors), - IXGBE_NETDEV_STAT(rx_dropped), - IXGBE_NETDEV_STAT(tx_dropped), - IXGBE_NETDEV_STAT(multicast), - IXGBE_NETDEV_STAT(collisions), - IXGBE_NETDEV_STAT(rx_over_errors), - IXGBE_NETDEV_STAT(rx_crc_errors), - IXGBE_NETDEV_STAT(rx_frame_errors), - IXGBE_NETDEV_STAT(rx_fifo_errors), - IXGBE_NETDEV_STAT(rx_missed_errors), - IXGBE_NETDEV_STAT(tx_aborted_errors), - IXGBE_NETDEV_STAT(tx_carrier_errors), - IXGBE_NETDEV_STAT(tx_fifo_errors), - IXGBE_NETDEV_STAT(tx_heartbeat_errors), -}; - -#define IXGBE_STAT(_name, _stat) { \ - .stat_string = _name, \ - .sizeof_stat = FIELD_SIZEOF(struct ixgbe_adapter, _stat), \ - .stat_offset = offsetof(struct ixgbe_adapter, _stat) \ -} -static struct ixgbe_stats ixgbe_gstrings_stats[] = { - IXGBE_STAT("rx_pkts_nic", stats.gprc), - IXGBE_STAT("tx_pkts_nic", stats.gptc), - IXGBE_STAT("rx_bytes_nic", stats.gorc), - IXGBE_STAT("tx_bytes_nic", stats.gotc), - IXGBE_STAT("lsc_int", lsc_int), - IXGBE_STAT("tx_busy", tx_busy), - IXGBE_STAT("non_eop_descs", non_eop_descs), -#ifndef CONFIG_IXGBE_NAPI - IXGBE_STAT("rx_dropped_backlog", rx_dropped_backlog), -#endif - IXGBE_STAT("broadcast", stats.bprc), - IXGBE_STAT("rx_no_buffer_count", stats.rnbc[0]) , - IXGBE_STAT("tx_timeout_count", tx_timeout_count), - IXGBE_STAT("tx_restart_queue", restart_queue), - IXGBE_STAT("rx_long_length_errors", stats.roc), - IXGBE_STAT("rx_short_length_errors", stats.ruc), - IXGBE_STAT("tx_flow_control_xon", stats.lxontxc), - IXGBE_STAT("rx_flow_control_xon", stats.lxonrxc), - IXGBE_STAT("tx_flow_control_xoff", stats.lxofftxc), - IXGBE_STAT("rx_flow_control_xoff", stats.lxoffrxc), - IXGBE_STAT("rx_csum_offload_errors", hw_csum_rx_error), - IXGBE_STAT("alloc_rx_page_failed", alloc_rx_page_failed), - IXGBE_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed), -#ifndef IXGBE_NO_LRO - IXGBE_STAT("lro_aggregated", lro_stats.coal), - IXGBE_STAT("lro_flushed", lro_stats.flushed), -#endif /* IXGBE_NO_LRO */ - IXGBE_STAT("rx_no_dma_resources", hw_rx_no_dma_resources), - IXGBE_STAT("hw_rsc_aggregated", rsc_total_count), - IXGBE_STAT("hw_rsc_flushed", rsc_total_flush), -#ifdef HAVE_TX_MQ - IXGBE_STAT("fdir_match", stats.fdirmatch), - IXGBE_STAT("fdir_miss", stats.fdirmiss), - IXGBE_STAT("fdir_overflow", fdir_overflow), -#endif /* HAVE_TX_MQ */ -#ifdef IXGBE_FCOE - IXGBE_STAT("fcoe_bad_fccrc", stats.fccrc), - IXGBE_STAT("fcoe_last_errors", stats.fclast), - IXGBE_STAT("rx_fcoe_dropped", stats.fcoerpdc), - IXGBE_STAT("rx_fcoe_packets", stats.fcoeprc), - IXGBE_STAT("rx_fcoe_dwords", stats.fcoedwrc), - IXGBE_STAT("fcoe_noddp", stats.fcoe_noddp), - IXGBE_STAT("fcoe_noddp_ext_buff", stats.fcoe_noddp_ext_buff), - IXGBE_STAT("tx_fcoe_packets", stats.fcoeptc), - IXGBE_STAT("tx_fcoe_dwords", stats.fcoedwtc), -#endif /* IXGBE_FCOE */ - IXGBE_STAT("os2bmc_rx_by_bmc", stats.o2bgptc), - IXGBE_STAT("os2bmc_tx_by_bmc", stats.b2ospc), - IXGBE_STAT("os2bmc_tx_by_host", stats.o2bspc), - IXGBE_STAT("os2bmc_rx_by_host", stats.b2ogprc), -}; - -#define IXGBE_QUEUE_STATS_LEN \ - ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_tx_queues + \ - ((struct ixgbe_adapter *)netdev_priv(netdev))->num_rx_queues) * \ - (sizeof(struct ixgbe_queue_stats) / sizeof(u64))) -#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats) -#define IXGBE_NETDEV_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_net_stats) -#define IXGBE_PB_STATS_LEN ( \ - (((struct ixgbe_adapter *)netdev_priv(netdev))->flags & \ - IXGBE_FLAG_DCB_ENABLED) ? \ - (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \ - sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \ - sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \ - sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \ - / sizeof(u64) : 0) -#define IXGBE_VF_STATS_LEN \ - ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_vfs) * \ - (sizeof(struct vf_stats) / sizeof(u64))) -#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \ - IXGBE_NETDEV_STATS_LEN + \ - IXGBE_PB_STATS_LEN + \ - IXGBE_QUEUE_STATS_LEN + \ - IXGBE_VF_STATS_LEN) - -#endif /* ETHTOOL_GSTATS */ -#ifdef ETHTOOL_TEST -static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = { - "Register test (offline)", "Eeprom test (offline)", - "Interrupt test (offline)", "Loopback test (offline)", - "Link test (on/offline)" -}; -#define IXGBE_TEST_LEN (sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN) -#endif /* ETHTOOL_TEST */ - -#ifndef ETHTOOL_GLINKSETTINGS -int ixgbe_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - u32 link_speed = 0; - bool link_up; - - ecmd->supported = SUPPORTED_10000baseT_Full; - ecmd->autoneg = AUTONEG_ENABLE; - ecmd->transceiver = XCVR_EXTERNAL; - if ((hw->phy.media_type == ixgbe_media_type_copper) || - (hw->phy.multispeed_fiber)) { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg); - switch (hw->mac.type) { - case ixgbe_mac_X540: - ecmd->supported |= SUPPORTED_100baseT_Full; - break; - default: - break; - } - - ecmd->advertising = ADVERTISED_Autoneg; - if (hw->phy.autoneg_advertised) { - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_100_FULL) - ecmd->advertising |= ADVERTISED_100baseT_Full; - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_10GB_FULL) - ecmd->advertising |= ADVERTISED_10000baseT_Full; - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_1GB_FULL) - ecmd->advertising |= ADVERTISED_1000baseT_Full; - } else { - /* - * Default advertised modes in case - * phy.autoneg_advertised isn't set. - */ - ecmd->advertising |= (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full); - if (hw->mac.type == ixgbe_mac_X540) - ecmd->advertising |= ADVERTISED_100baseT_Full; - } - - if (hw->phy.media_type == ixgbe_media_type_copper) { - ecmd->supported |= SUPPORTED_TP; - ecmd->advertising |= ADVERTISED_TP; - ecmd->port = PORT_TP; - } else { - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising |= ADVERTISED_FIBRE; - ecmd->port = PORT_FIBRE; - } - } else if (hw->phy.media_type == ixgbe_media_type_backplane) { - /* Set as FIBRE until SERDES defined in kernel */ - if (hw->device_id == IXGBE_DEV_ID_82598_BX) { - ecmd->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - ecmd->autoneg = AUTONEG_DISABLE; - } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) - || (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - } else { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - } - } else { - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - ecmd->autoneg = AUTONEG_DISABLE; - } - -#ifdef HAVE_ETHTOOL_SFP_DISPLAY_PORT - /* Get PHY type */ - switch (adapter->hw.phy.type) { - case ixgbe_phy_tn: - case ixgbe_phy_aq: - case ixgbe_phy_cu_unknown: - /* Copper 10G-BASET */ - ecmd->port = PORT_TP; - break; - case ixgbe_phy_qt: - ecmd->port = PORT_FIBRE; - break; - case ixgbe_phy_nl: - case ixgbe_phy_sfp_passive_tyco: - case ixgbe_phy_sfp_passive_unknown: - case ixgbe_phy_sfp_ftl: - case ixgbe_phy_sfp_avago: - case ixgbe_phy_sfp_intel: - case ixgbe_phy_sfp_unknown: - switch (adapter->hw.phy.sfp_type) { - /* SFP+ devices, further checking needed */ - case ixgbe_sfp_type_da_cu: - case ixgbe_sfp_type_da_cu_core0: - case ixgbe_sfp_type_da_cu_core1: - ecmd->port = PORT_DA; - break; - case ixgbe_sfp_type_sr: - case ixgbe_sfp_type_lr: - case ixgbe_sfp_type_srlr_core0: - case ixgbe_sfp_type_srlr_core1: - ecmd->port = PORT_FIBRE; - break; - case ixgbe_sfp_type_not_present: - ecmd->port = PORT_NONE; - break; - case ixgbe_sfp_type_1g_cu_core0: - case ixgbe_sfp_type_1g_cu_core1: - ecmd->port = PORT_TP; - ecmd->supported = SUPPORTED_TP; - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_TP); - break; - case ixgbe_sfp_type_1g_sx_core0: - case ixgbe_sfp_type_1g_sx_core1: - ecmd->port = PORT_FIBRE; - ecmd->supported = SUPPORTED_FIBRE; - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE); - break; - case ixgbe_sfp_type_unknown: - default: - ecmd->port = PORT_OTHER; - break; - } - break; - case ixgbe_phy_xaui: - ecmd->port = PORT_NONE; - break; - case ixgbe_phy_unknown: - case ixgbe_phy_generic: - case ixgbe_phy_sfp_unsupported: - default: - ecmd->port = PORT_OTHER; - break; - } -#endif - - if (!in_interrupt()) { - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - } else { - /* - * this case is a special workaround for RHEL5 bonding - * that calls this routine from interrupt context - */ - link_speed = adapter->link_speed; - link_up = adapter->link_up; - } - - if (link_up) { - switch (link_speed) { - case IXGBE_LINK_SPEED_10GB_FULL: - ecmd->speed = SPEED_10000; - break; - case IXGBE_LINK_SPEED_1GB_FULL: - ecmd->speed = SPEED_1000; - break; - case IXGBE_LINK_SPEED_100_FULL: - ecmd->speed = SPEED_100; - break; - default: - break; - } - ecmd->duplex = DUPLEX_FULL; - } else { - ecmd->speed = -1; - ecmd->duplex = -1; - } - - return 0; -} -#endif - -#ifndef ETHTOOL_SLINKSETTINGS -static int ixgbe_set_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - u32 advertised, old; - s32 err = 0; - - if ((hw->phy.media_type == ixgbe_media_type_copper) || - (hw->phy.multispeed_fiber)) { - /* - * this function does not support duplex forcing, but can - * limit the advertising of the adapter to the specified speed - */ - if (ecmd->autoneg == AUTONEG_DISABLE) - return -EINVAL; - - if (ecmd->advertising & ~ecmd->supported) - return -EINVAL; - - old = hw->phy.autoneg_advertised; - advertised = 0; - if (ecmd->advertising & ADVERTISED_10000baseT_Full) - advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (ecmd->advertising & ADVERTISED_1000baseT_Full) - advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - if (ecmd->advertising & ADVERTISED_100baseT_Full) - advertised |= IXGBE_LINK_SPEED_100_FULL; - - if (old == advertised) - return err; - /* this sets the link speed and restarts auto-neg */ - hw->mac.autotry_restart = true; - err = hw->mac.ops.setup_link(hw, advertised, true, true); - if (err) { - e_info(probe, "setup link failed with code %d\n", err); - hw->mac.ops.setup_link(hw, old, true, true); - } - } - return err; -} -#endif - -static void ixgbe_get_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *pause) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - if (hw->fc.disable_fc_autoneg) - pause->autoneg = 0; - else - pause->autoneg = 1; - - if (hw->fc.current_mode == ixgbe_fc_rx_pause) { - pause->rx_pause = 1; - } else if (hw->fc.current_mode == ixgbe_fc_tx_pause) { - pause->tx_pause = 1; - } else if (hw->fc.current_mode == ixgbe_fc_full) { - pause->rx_pause = 1; - pause->tx_pause = 1; - } -} - -static int ixgbe_set_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *pause) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - struct ixgbe_fc_info fc = hw->fc; - - /* 82598 does no support link flow control with DCB enabled */ - if ((hw->mac.type == ixgbe_mac_82598EB) && - (adapter->flags & IXGBE_FLAG_DCB_ENABLED)) - return -EINVAL; - - fc.disable_fc_autoneg = (pause->autoneg != AUTONEG_ENABLE); - - if ((pause->rx_pause && pause->tx_pause) || pause->autoneg) - fc.requested_mode = ixgbe_fc_full; - else if (pause->rx_pause) - fc.requested_mode = ixgbe_fc_rx_pause; - else if (pause->tx_pause) - fc.requested_mode = ixgbe_fc_tx_pause; - else - fc.requested_mode = ixgbe_fc_none; - - /* if the thing changed then we'll update and use new autoneg */ - if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) { - hw->fc = fc; - if (netif_running(netdev)) - ixgbe_reinit_locked(adapter); - else - ixgbe_reset(adapter); - } - - return 0; -} - -static u32 ixgbe_get_msglevel(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - return adapter->msg_enable; -} - -static void ixgbe_set_msglevel(struct net_device *netdev, u32 data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - adapter->msg_enable = data; -} - -static int ixgbe_get_regs_len(struct net_device *netdev) -{ -#define IXGBE_REGS_LEN 1129 - return IXGBE_REGS_LEN * sizeof(u32); -} - -#define IXGBE_GET_STAT(_A_, _R_) (_A_->stats._R_) - - -static void ixgbe_get_regs(struct net_device *netdev, struct ethtool_regs *regs, - void *p) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - u32 *regs_buff = p; - u8 i; - - printk(KERN_DEBUG "ixgbe_get_regs_1\n"); - memset(p, 0, IXGBE_REGS_LEN * sizeof(u32)); - printk(KERN_DEBUG "ixgbe_get_regs_2 0x%p\n", hw->hw_addr); - - regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id; - - /* General Registers */ - regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_CTRL); - printk(KERN_DEBUG "ixgbe_get_regs_3\n"); - regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_STATUS); - regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); - regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_ESDP); - regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_EODSDP); - regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_FRTIMER); - regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER); - - printk(KERN_DEBUG "ixgbe_get_regs_4\n"); - - /* NVM Register */ - regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC); - regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD); - regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA); - regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL); - regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA); - regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL); - regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA); - regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT); - regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP); - regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC); - - /* Interrupt */ - /* don't read EICR because it can clear interrupt causes, instead - * read EICS which is a shadow but doesn't clear EICR */ - regs_buff[18] = IXGBE_READ_REG(hw, IXGBE_EICS); - regs_buff[19] = IXGBE_READ_REG(hw, IXGBE_EICS); - regs_buff[20] = IXGBE_READ_REG(hw, IXGBE_EIMS); - regs_buff[21] = IXGBE_READ_REG(hw, IXGBE_EIMC); - regs_buff[22] = IXGBE_READ_REG(hw, IXGBE_EIAC); - regs_buff[23] = IXGBE_READ_REG(hw, IXGBE_EIAM); - regs_buff[24] = IXGBE_READ_REG(hw, IXGBE_EITR(0)); - regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0)); - regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT); - regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA); - regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL(0)); - regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE); - - /* Flow Control */ - regs_buff[30] = IXGBE_READ_REG(hw, IXGBE_PFCTOP); - regs_buff[31] = IXGBE_READ_REG(hw, IXGBE_FCTTV(0)); - regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1)); - regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2)); - regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3)); - for (i = 0; i < 8; i++) { - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i)); - regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i)); - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - regs_buff[35 + i] = IXGBE_READ_REG(hw, - IXGBE_FCRTL_82599(i)); - regs_buff[43 + i] = IXGBE_READ_REG(hw, - IXGBE_FCRTH_82599(i)); - break; - default: - break; - } - } - regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV); - regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS); - - /* Receive DMA */ - for (i = 0; i < 64; i++) - regs_buff[53 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); - for (i = 0; i < 64; i++) - regs_buff[117 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); - for (i = 0; i < 64; i++) - regs_buff[181 + i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); - for (i = 0; i < 64; i++) - regs_buff[245 + i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); - for (i = 0; i < 64; i++) - regs_buff[309 + i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); - for (i = 0; i < 64; i++) - regs_buff[373 + i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); - for (i = 0; i < 16; i++) - regs_buff[437 + i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); - for (i = 0; i < 16; i++) - regs_buff[453 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); - regs_buff[469] = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); - for (i = 0; i < 8; i++) - regs_buff[470 + i] = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)); - regs_buff[478] = IXGBE_READ_REG(hw, IXGBE_RXCTRL); - regs_buff[479] = IXGBE_READ_REG(hw, IXGBE_DROPEN); - - /* Receive */ - regs_buff[480] = IXGBE_READ_REG(hw, IXGBE_RXCSUM); - regs_buff[481] = IXGBE_READ_REG(hw, IXGBE_RFCTL); - for (i = 0; i < 16; i++) - regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i)); - for (i = 0; i < 16; i++) - regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i)); - regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE(0)); - regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL); - regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL); - regs_buff[518] = IXGBE_READ_REG(hw, IXGBE_MRQC); - regs_buff[519] = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); - for (i = 0; i < 8; i++) - regs_buff[520 + i] = IXGBE_READ_REG(hw, IXGBE_IMIR(i)); - for (i = 0; i < 8; i++) - regs_buff[528 + i] = IXGBE_READ_REG(hw, IXGBE_IMIREXT(i)); - regs_buff[536] = IXGBE_READ_REG(hw, IXGBE_IMIRVP); - - /* Transmit */ - for (i = 0; i < 32; i++) - regs_buff[537 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); - for (i = 0; i < 32; i++) - regs_buff[569 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); - for (i = 0; i < 32; i++) - regs_buff[601 + i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); - for (i = 0; i < 32; i++) - regs_buff[633 + i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); - for (i = 0; i < 32; i++) - regs_buff[665 + i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); - for (i = 0; i < 32; i++) - regs_buff[697 + i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); - for (i = 0; i < 32; i++) - regs_buff[729 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAL(i)); - for (i = 0; i < 32; i++) - regs_buff[761 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAH(i)); - regs_buff[793] = IXGBE_READ_REG(hw, IXGBE_DTXCTL); - for (i = 0; i < 16; i++) - regs_buff[794 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); - regs_buff[810] = IXGBE_READ_REG(hw, IXGBE_TIPG); - for (i = 0; i < 8; i++) - regs_buff[811 + i] = IXGBE_READ_REG(hw, IXGBE_TXPBSIZE(i)); - regs_buff[819] = IXGBE_READ_REG(hw, IXGBE_MNGTXMAP); - - /* Wake Up */ - regs_buff[820] = IXGBE_READ_REG(hw, IXGBE_WUC); - regs_buff[821] = IXGBE_READ_REG(hw, IXGBE_WUFC); - regs_buff[822] = IXGBE_READ_REG(hw, IXGBE_WUS); - regs_buff[823] = IXGBE_READ_REG(hw, IXGBE_IPAV); - regs_buff[824] = IXGBE_READ_REG(hw, IXGBE_IP4AT); - regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT); - regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL); - regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM); - regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0)); - - /* DCB */ - regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS); - regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS); - regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS); - regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RUPPBMR); - for (i = 0; i < 8; i++) - regs_buff[833 + i] = IXGBE_READ_REG(hw, IXGBE_RT2CR(i)); - for (i = 0; i < 8; i++) - regs_buff[841 + i] = IXGBE_READ_REG(hw, IXGBE_RT2SR(i)); - for (i = 0; i < 8; i++) - regs_buff[849 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCCR(i)); - for (i = 0; i < 8; i++) - regs_buff[857 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCSR(i)); - for (i = 0; i < 8; i++) - regs_buff[865 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCCR(i)); - for (i = 0; i < 8; i++) - regs_buff[873 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCSR(i)); - - /* Statistics */ - regs_buff[881] = IXGBE_GET_STAT(adapter, crcerrs); - regs_buff[882] = IXGBE_GET_STAT(adapter, illerrc); - regs_buff[883] = IXGBE_GET_STAT(adapter, errbc); - regs_buff[884] = IXGBE_GET_STAT(adapter, mspdc); - for (i = 0; i < 8; i++) - regs_buff[885 + i] = IXGBE_GET_STAT(adapter, mpc[i]); - regs_buff[893] = IXGBE_GET_STAT(adapter, mlfc); - regs_buff[894] = IXGBE_GET_STAT(adapter, mrfc); - regs_buff[895] = IXGBE_GET_STAT(adapter, rlec); - regs_buff[896] = IXGBE_GET_STAT(adapter, lxontxc); - regs_buff[897] = IXGBE_GET_STAT(adapter, lxonrxc); - regs_buff[898] = IXGBE_GET_STAT(adapter, lxofftxc); - regs_buff[899] = IXGBE_GET_STAT(adapter, lxoffrxc); - for (i = 0; i < 8; i++) - regs_buff[900 + i] = IXGBE_GET_STAT(adapter, pxontxc[i]); - for (i = 0; i < 8; i++) - regs_buff[908 + i] = IXGBE_GET_STAT(adapter, pxonrxc[i]); - for (i = 0; i < 8; i++) - regs_buff[916 + i] = IXGBE_GET_STAT(adapter, pxofftxc[i]); - for (i = 0; i < 8; i++) - regs_buff[924 + i] = IXGBE_GET_STAT(adapter, pxoffrxc[i]); - regs_buff[932] = IXGBE_GET_STAT(adapter, prc64); - regs_buff[933] = IXGBE_GET_STAT(adapter, prc127); - regs_buff[934] = IXGBE_GET_STAT(adapter, prc255); - regs_buff[935] = IXGBE_GET_STAT(adapter, prc511); - regs_buff[936] = IXGBE_GET_STAT(adapter, prc1023); - regs_buff[937] = IXGBE_GET_STAT(adapter, prc1522); - regs_buff[938] = IXGBE_GET_STAT(adapter, gprc); - regs_buff[939] = IXGBE_GET_STAT(adapter, bprc); - regs_buff[940] = IXGBE_GET_STAT(adapter, mprc); - regs_buff[941] = IXGBE_GET_STAT(adapter, gptc); - regs_buff[942] = IXGBE_GET_STAT(adapter, gorc); - regs_buff[944] = IXGBE_GET_STAT(adapter, gotc); - for (i = 0; i < 8; i++) - regs_buff[946 + i] = IXGBE_GET_STAT(adapter, rnbc[i]); - regs_buff[954] = IXGBE_GET_STAT(adapter, ruc); - regs_buff[955] = IXGBE_GET_STAT(adapter, rfc); - regs_buff[956] = IXGBE_GET_STAT(adapter, roc); - regs_buff[957] = IXGBE_GET_STAT(adapter, rjc); - regs_buff[958] = IXGBE_GET_STAT(adapter, mngprc); - regs_buff[959] = IXGBE_GET_STAT(adapter, mngpdc); - regs_buff[960] = IXGBE_GET_STAT(adapter, mngptc); - regs_buff[961] = IXGBE_GET_STAT(adapter, tor); - regs_buff[963] = IXGBE_GET_STAT(adapter, tpr); - regs_buff[964] = IXGBE_GET_STAT(adapter, tpt); - regs_buff[965] = IXGBE_GET_STAT(adapter, ptc64); - regs_buff[966] = IXGBE_GET_STAT(adapter, ptc127); - regs_buff[967] = IXGBE_GET_STAT(adapter, ptc255); - regs_buff[968] = IXGBE_GET_STAT(adapter, ptc511); - regs_buff[969] = IXGBE_GET_STAT(adapter, ptc1023); - regs_buff[970] = IXGBE_GET_STAT(adapter, ptc1522); - regs_buff[971] = IXGBE_GET_STAT(adapter, mptc); - regs_buff[972] = IXGBE_GET_STAT(adapter, bptc); - regs_buff[973] = IXGBE_GET_STAT(adapter, xec); - for (i = 0; i < 16; i++) - regs_buff[974 + i] = IXGBE_GET_STAT(adapter, qprc[i]); - for (i = 0; i < 16; i++) - regs_buff[990 + i] = IXGBE_GET_STAT(adapter, qptc[i]); - for (i = 0; i < 16; i++) - regs_buff[1006 + i] = IXGBE_GET_STAT(adapter, qbrc[i]); - for (i = 0; i < 16; i++) - regs_buff[1022 + i] = IXGBE_GET_STAT(adapter, qbtc[i]); - - /* MAC */ - regs_buff[1038] = IXGBE_READ_REG(hw, IXGBE_PCS1GCFIG); - regs_buff[1039] = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); - regs_buff[1040] = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); - regs_buff[1041] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG0); - regs_buff[1042] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG1); - regs_buff[1043] = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); - regs_buff[1044] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); - regs_buff[1045] = IXGBE_READ_REG(hw, IXGBE_PCS1GANNP); - regs_buff[1046] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLPNP); - regs_buff[1047] = IXGBE_READ_REG(hw, IXGBE_HLREG0); - regs_buff[1048] = IXGBE_READ_REG(hw, IXGBE_HLREG1); - regs_buff[1049] = IXGBE_READ_REG(hw, IXGBE_PAP); - regs_buff[1050] = IXGBE_READ_REG(hw, IXGBE_MACA); - regs_buff[1051] = IXGBE_READ_REG(hw, IXGBE_APAE); - regs_buff[1052] = IXGBE_READ_REG(hw, IXGBE_ARD); - regs_buff[1053] = IXGBE_READ_REG(hw, IXGBE_AIS); - regs_buff[1054] = IXGBE_READ_REG(hw, IXGBE_MSCA); - regs_buff[1055] = IXGBE_READ_REG(hw, IXGBE_MSRWD); - regs_buff[1056] = IXGBE_READ_REG(hw, IXGBE_MLADD); - regs_buff[1057] = IXGBE_READ_REG(hw, IXGBE_MHADD); - regs_buff[1058] = IXGBE_READ_REG(hw, IXGBE_TREG); - regs_buff[1059] = IXGBE_READ_REG(hw, IXGBE_PCSS1); - regs_buff[1060] = IXGBE_READ_REG(hw, IXGBE_PCSS2); - regs_buff[1061] = IXGBE_READ_REG(hw, IXGBE_XPCSS); - regs_buff[1062] = IXGBE_READ_REG(hw, IXGBE_SERDESC); - regs_buff[1063] = IXGBE_READ_REG(hw, IXGBE_MACS); - regs_buff[1064] = IXGBE_READ_REG(hw, IXGBE_AUTOC); - regs_buff[1065] = IXGBE_READ_REG(hw, IXGBE_LINKS); - regs_buff[1066] = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - regs_buff[1067] = IXGBE_READ_REG(hw, IXGBE_AUTOC3); - regs_buff[1068] = IXGBE_READ_REG(hw, IXGBE_ANLP1); - regs_buff[1069] = IXGBE_READ_REG(hw, IXGBE_ANLP2); - regs_buff[1070] = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); - - /* Diagnostic */ - regs_buff[1071] = IXGBE_READ_REG(hw, IXGBE_RDSTATCTL); - for (i = 0; i < 8; i++) - regs_buff[1072 + i] = IXGBE_READ_REG(hw, IXGBE_RDSTAT(i)); - regs_buff[1080] = IXGBE_READ_REG(hw, IXGBE_RDHMPN); - for (i = 0; i < 4; i++) - regs_buff[1081 + i] = IXGBE_READ_REG(hw, IXGBE_RIC_DW(i)); - regs_buff[1085] = IXGBE_READ_REG(hw, IXGBE_RDPROBE); - regs_buff[1086] = IXGBE_READ_REG(hw, IXGBE_TDSTATCTL); - for (i = 0; i < 8; i++) - regs_buff[1087 + i] = IXGBE_READ_REG(hw, IXGBE_TDSTAT(i)); - regs_buff[1095] = IXGBE_READ_REG(hw, IXGBE_TDHMPN); - for (i = 0; i < 4; i++) - regs_buff[1096 + i] = IXGBE_READ_REG(hw, IXGBE_TIC_DW(i)); - regs_buff[1100] = IXGBE_READ_REG(hw, IXGBE_TDPROBE); - regs_buff[1101] = IXGBE_READ_REG(hw, IXGBE_TXBUFCTRL); - regs_buff[1102] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA0); - regs_buff[1103] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA1); - regs_buff[1104] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA2); - regs_buff[1105] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA3); - regs_buff[1106] = IXGBE_READ_REG(hw, IXGBE_RXBUFCTRL); - regs_buff[1107] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA0); - regs_buff[1108] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA1); - regs_buff[1109] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA2); - regs_buff[1110] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA3); - for (i = 0; i < 8; i++) - regs_buff[1111 + i] = IXGBE_READ_REG(hw, IXGBE_PCIE_DIAG(i)); - regs_buff[1119] = IXGBE_READ_REG(hw, IXGBE_RFVAL); - regs_buff[1120] = IXGBE_READ_REG(hw, IXGBE_MDFTC1); - regs_buff[1121] = IXGBE_READ_REG(hw, IXGBE_MDFTC2); - regs_buff[1122] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO1); - regs_buff[1123] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO2); - regs_buff[1124] = IXGBE_READ_REG(hw, IXGBE_MDFTS); - regs_buff[1125] = IXGBE_READ_REG(hw, IXGBE_PCIEECCCTL); - regs_buff[1126] = IXGBE_READ_REG(hw, IXGBE_PBTXECC); - regs_buff[1127] = IXGBE_READ_REG(hw, IXGBE_PBRXECC); - - /* 82599 X540 specific registers */ - regs_buff[1128] = IXGBE_READ_REG(hw, IXGBE_MFLCN); -} - -static int ixgbe_get_eeprom_len(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - return adapter->hw.eeprom.word_size * 2; -} - -static int ixgbe_get_eeprom(struct net_device *netdev, - struct ethtool_eeprom *eeprom, u8 *bytes) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - u16 *eeprom_buff; - int first_word, last_word, eeprom_len; - int ret_val = 0; - u16 i; - - if (eeprom->len == 0) - return -EINVAL; - - eeprom->magic = hw->vendor_id | (hw->device_id << 16); - - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; - eeprom_len = last_word - first_word + 1; - - eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; - - ret_val = ixgbe_read_eeprom_buffer(hw, first_word, eeprom_len, - eeprom_buff); - - /* Device's eeprom is always little-endian, word addressable */ - for (i = 0; i < eeprom_len; i++) - le16_to_cpus(&eeprom_buff[i]); - - memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); - kfree(eeprom_buff); - - return ret_val; -} - -static int ixgbe_set_eeprom(struct net_device *netdev, - struct ethtool_eeprom *eeprom, u8 *bytes) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - u16 *eeprom_buff; - void *ptr; - int max_len, first_word, last_word, ret_val = 0; - u16 i; - - if (eeprom->len == 0) - return -EINVAL; - - if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) - return -EINVAL; - - max_len = hw->eeprom.word_size * 2; - - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; - eeprom_buff = kmalloc(max_len, GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; - - ptr = eeprom_buff; - - if (eeprom->offset & 1) { - /* - * need read/modify/write of first changed EEPROM word - * only the second byte of the word is being modified - */ - ret_val = ixgbe_read_eeprom(hw, first_word, &eeprom_buff[0]); - if (ret_val) - goto err; - - ptr++; - } - if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { - /* - * need read/modify/write of last changed EEPROM word - * only the first byte of the word is being modified - */ - ret_val = ixgbe_read_eeprom(hw, last_word, - &eeprom_buff[last_word - first_word]); - if (ret_val) - goto err; - } - - /* Device's eeprom is always little-endian, word addressable */ - for (i = 0; i < last_word - first_word + 1; i++) - le16_to_cpus(&eeprom_buff[i]); - - memcpy(ptr, bytes, eeprom->len); - - for (i = 0; i < last_word - first_word + 1; i++) - cpu_to_le16s(&eeprom_buff[i]); - - ret_val = ixgbe_write_eeprom_buffer(hw, first_word, - last_word - first_word + 1, - eeprom_buff); - - /* Update the checksum */ - if (ret_val == 0) - ixgbe_update_eeprom_checksum(hw); - -err: - kfree(eeprom_buff); - return ret_val; -} - -static void ixgbe_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - strlcpy(drvinfo->driver, ixgbe_driver_name, sizeof(drvinfo->driver)); - - strlcpy(drvinfo->version, ixgbe_driver_version, - sizeof(drvinfo->version)); - - strlcpy(drvinfo->fw_version, adapter->eeprom_id, - sizeof(drvinfo->fw_version)); - - strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), - sizeof(drvinfo->bus_info)); - - drvinfo->n_stats = IXGBE_STATS_LEN; - drvinfo->testinfo_len = IXGBE_TEST_LEN; - drvinfo->regdump_len = ixgbe_get_regs_len(netdev); -} - -static void ixgbe_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - ring->rx_max_pending = IXGBE_MAX_RXD; - ring->tx_max_pending = IXGBE_MAX_TXD; - ring->rx_mini_max_pending = 0; - ring->rx_jumbo_max_pending = 0; - ring->rx_pending = adapter->rx_ring_count; - ring->tx_pending = adapter->tx_ring_count; - ring->rx_mini_pending = 0; - ring->rx_jumbo_pending = 0; -} - -static int ixgbe_set_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_ring *tx_ring = NULL, *rx_ring = NULL; - u32 new_rx_count, new_tx_count; - int i, err = 0; - - if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) - return -EINVAL; - - new_tx_count = clamp_t(u32, ring->tx_pending, - IXGBE_MIN_TXD, IXGBE_MAX_TXD); - new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE); - - new_rx_count = clamp_t(u32, ring->rx_pending, - IXGBE_MIN_RXD, IXGBE_MAX_RXD); - new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE); - - /* if nothing to do return success */ - if ((new_tx_count == adapter->tx_ring_count) && - (new_rx_count == adapter->rx_ring_count)) - return 0; - - while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - - if (!netif_running(adapter->netdev)) { - for (i = 0; i < adapter->num_tx_queues; i++) - adapter->tx_ring[i]->count = new_tx_count; - for (i = 0; i < adapter->num_rx_queues; i++) - adapter->rx_ring[i]->count = new_rx_count; - adapter->tx_ring_count = new_tx_count; - adapter->rx_ring_count = new_rx_count; - goto clear_reset; - } - - /* alloc updated Tx resources */ - if (new_tx_count != adapter->tx_ring_count) { - tx_ring = vmalloc(adapter->num_tx_queues * sizeof(*tx_ring)); - if (!tx_ring) { - err = -ENOMEM; - goto clear_reset; - } - - for (i = 0; i < adapter->num_tx_queues; i++) { - /* clone ring and setup updated count */ - tx_ring[i] = *adapter->tx_ring[i]; - tx_ring[i].count = new_tx_count; - err = ixgbe_setup_tx_resources(&tx_ring[i]); - if (err) { - while (i) { - i--; - ixgbe_free_tx_resources(&tx_ring[i]); - } - - vfree(tx_ring); - tx_ring = NULL; - - goto clear_reset; - } - } - } - - /* alloc updated Rx resources */ - if (new_rx_count != adapter->rx_ring_count) { - rx_ring = vmalloc(adapter->num_rx_queues * sizeof(*rx_ring)); - if (!rx_ring) { - err = -ENOMEM; - goto clear_reset; - } - - for (i = 0; i < adapter->num_rx_queues; i++) { - /* clone ring and setup updated count */ - rx_ring[i] = *adapter->rx_ring[i]; - rx_ring[i].count = new_rx_count; - err = ixgbe_setup_rx_resources(&rx_ring[i]); - if (err) { - while (i) { - i--; - ixgbe_free_rx_resources(&rx_ring[i]); - } - - vfree(rx_ring); - rx_ring = NULL; - - goto clear_reset; - } - } - } - - /* bring interface down to prepare for update */ - ixgbe_down(adapter); - - /* Tx */ - if (tx_ring) { - for (i = 0; i < adapter->num_tx_queues; i++) { - ixgbe_free_tx_resources(adapter->tx_ring[i]); - *adapter->tx_ring[i] = tx_ring[i]; - } - adapter->tx_ring_count = new_tx_count; - - vfree(tx_ring); - tx_ring = NULL; - } - - /* Rx */ - if (rx_ring) { - for (i = 0; i < adapter->num_rx_queues; i++) { - ixgbe_free_rx_resources(adapter->rx_ring[i]); - *adapter->rx_ring[i] = rx_ring[i]; - } - adapter->rx_ring_count = new_rx_count; - - vfree(rx_ring); - rx_ring = NULL; - } - - /* restore interface using new values */ - ixgbe_up(adapter); - -clear_reset: - /* free Tx resources if Rx error is encountered */ - if (tx_ring) { - for (i = 0; i < adapter->num_tx_queues; i++) - ixgbe_free_tx_resources(&tx_ring[i]); - vfree(tx_ring); - } - - clear_bit(__IXGBE_RESETTING, &adapter->state); - return err; -} - -#ifndef HAVE_ETHTOOL_GET_SSET_COUNT -static int ixgbe_get_stats_count(struct net_device *netdev) -{ - return IXGBE_STATS_LEN; -} - -#else /* HAVE_ETHTOOL_GET_SSET_COUNT */ -static int ixgbe_get_sset_count(struct net_device *netdev, int sset) -{ - switch (sset) { - case ETH_SS_TEST: - return IXGBE_TEST_LEN; - case ETH_SS_STATS: - return IXGBE_STATS_LEN; - default: - return -EOPNOTSUPP; - } -} - -#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ -static void ixgbe_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, u64 *data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - struct net_device_stats *net_stats = &netdev->stats; -#else - struct net_device_stats *net_stats = &adapter->net_stats; -#endif - u64 *queue_stat; - int stat_count = sizeof(struct ixgbe_queue_stats) / sizeof(u64); - int i, j, k; - char *p; - - printk(KERN_DEBUG "ixgbe_stats 0\n"); - ixgbe_update_stats(adapter); - printk(KERN_DEBUG "ixgbe_stats 1\n"); - - for (i = 0; i < IXGBE_NETDEV_STATS_LEN; i++) { - p = (char *)net_stats + ixgbe_gstrings_net_stats[i].stat_offset; - data[i] = (ixgbe_gstrings_net_stats[i].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; - } - for (j = 0; j < IXGBE_GLOBAL_STATS_LEN; j++, i++) { - p = (char *)adapter + ixgbe_gstrings_stats[j].stat_offset; - data[i] = (ixgbe_gstrings_stats[j].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; - } - printk(KERN_DEBUG "ixgbe_stats 2\n"); -#ifdef NO_VNIC - for (j = 0; j < adapter->num_tx_queues; j++) { - queue_stat = (u64 *)&adapter->tx_ring[j]->stats; - for (k = 0; k < stat_count; k++) - data[i + k] = queue_stat[k]; - i += k; - } - for (j = 0; j < adapter->num_rx_queues; j++) { - queue_stat = (u64 *)&adapter->rx_ring[j]->stats; - for (k = 0; k < stat_count; k++) - data[i + k] = queue_stat[k]; - i += k; - } - printk(KERN_DEBUG "ixgbe_stats 3\n"); -#endif - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - for (j = 0; j < MAX_TX_PACKET_BUFFERS; j++) { - data[i++] = adapter->stats.pxontxc[j]; - data[i++] = adapter->stats.pxofftxc[j]; - } - for (j = 0; j < MAX_RX_PACKET_BUFFERS; j++) { - data[i++] = adapter->stats.pxonrxc[j]; - data[i++] = adapter->stats.pxoffrxc[j]; - } - } - printk(KERN_DEBUG "ixgbe_stats 4\n"); - stat_count = sizeof(struct vf_stats) / sizeof(u64); - for (j = 0; j < adapter->num_vfs; j++) { - queue_stat = (u64 *)&adapter->vfinfo[j].vfstats; - for (k = 0; k < stat_count; k++) - data[i + k] = queue_stat[k]; - queue_stat = (u64 *)&adapter->vfinfo[j].saved_rst_vfstats; - for (k = 0; k < stat_count; k++) - data[i + k] += queue_stat[k]; - i += k; - } -} - -static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, - u8 *data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - char *p = (char *)data; - int i; - - switch (stringset) { - case ETH_SS_TEST: - memcpy(data, *ixgbe_gstrings_test, - IXGBE_TEST_LEN * ETH_GSTRING_LEN); - break; - case ETH_SS_STATS: - for (i = 0; i < IXGBE_NETDEV_STATS_LEN; i++) { - memcpy(p, ixgbe_gstrings_net_stats[i].stat_string, - ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { - memcpy(p, ixgbe_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < adapter->num_tx_queues; i++) { - sprintf(p, "tx_queue_%u_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "tx_queue_%u_bytes", i); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < adapter->num_rx_queues; i++) { - sprintf(p, "rx_queue_%u_packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_queue_%u_bytes", i); - p += ETH_GSTRING_LEN; - } - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { - sprintf(p, "tx_pb_%u_pxon", i); - p += ETH_GSTRING_LEN; - sprintf(p, "tx_pb_%u_pxoff", i); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < MAX_RX_PACKET_BUFFERS; i++) { - sprintf(p, "rx_pb_%u_pxon", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_pb_%u_pxoff", i); - p += ETH_GSTRING_LEN; - } - } - for (i = 0; i < adapter->num_vfs; i++) { - sprintf(p, "VF %d Rx Packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "VF %d Rx Bytes", i); - p += ETH_GSTRING_LEN; - sprintf(p, "VF %d Tx Packets", i); - p += ETH_GSTRING_LEN; - sprintf(p, "VF %d Tx Bytes", i); - p += ETH_GSTRING_LEN; - sprintf(p, "VF %d MC Packets", i); - p += ETH_GSTRING_LEN; - } - /* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */ - break; - } -} - -static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data) -{ - struct ixgbe_hw *hw = &adapter->hw; - bool link_up; - u32 link_speed = 0; - *data = 0; - - hw->mac.ops.check_link(hw, &link_speed, &link_up, true); - if (link_up) - return *data; - else - *data = 1; - return *data; -} - -/* ethtool register test data */ -struct ixgbe_reg_test { - u16 reg; - u8 array_len; - u8 test_type; - u32 mask; - u32 write; -}; - -/* In the hardware, registers are laid out either singly, in arrays - * spaced 0x40 bytes apart, or in contiguous tables. We assume - * most tests take place on arrays or single registers (handled - * as a single-element array) and special-case the tables. - * Table tests are always pattern tests. - * - * We also make provision for some required setup steps by specifying - * registers to be written without any read-back testing. - */ - -#define PATTERN_TEST 1 -#define SET_READ_TEST 2 -#define WRITE_NO_TEST 3 -#define TABLE32_TEST 4 -#define TABLE64_TEST_LO 5 -#define TABLE64_TEST_HI 6 - -/* default 82599 register test */ -static struct ixgbe_reg_test reg_test_82599[] = { - { IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, - { IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, - { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 }, - { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 }, - { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE }, - { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, - { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, - { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 }, - { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 }, - { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF }, - { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { 0, 0, 0, 0 } -}; - -/* default 82598 register test */ -static struct ixgbe_reg_test reg_test_82598[] = { - { IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, - { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, - { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 }, - { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - /* Enable all four RX queues before testing. */ - { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE }, - /* RDH is read-only for 82598, only test RDT. */ - { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, - { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, - { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF }, - { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 }, - { IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 }, - { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, - { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF }, - { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { 0, 0, 0, 0 } -}; - -#define REG_PATTERN_TEST(R, M, W) \ -{ \ - u32 pat, val, before; \ - const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ - for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \ - before = readl(adapter->hw.hw_addr + R); \ - writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \ - val = readl(adapter->hw.hw_addr + R); \ - if (val != (_test[pat] & W & M)) { \ - e_err(drv, "pattern test reg %04X failed: got " \ - "0x%08X expected 0x%08X\n", \ - R, val, (_test[pat] & W & M)); \ - *data = R; \ - writel(before, adapter->hw.hw_addr + R); \ - return 1; \ - } \ - writel(before, adapter->hw.hw_addr + R); \ - } \ -} - -#define REG_SET_AND_CHECK(R, M, W) \ -{ \ - u32 val, before; \ - before = readl(adapter->hw.hw_addr + R); \ - writel((W & M), (adapter->hw.hw_addr + R)); \ - val = readl(adapter->hw.hw_addr + R); \ - if ((W & M) != (val & M)) { \ - e_err(drv, "set/check reg %04X test failed: got 0x%08X " \ - "expected 0x%08X\n", R, (val & M), (W & M)); \ - *data = R; \ - writel(before, (adapter->hw.hw_addr + R)); \ - return 1; \ - } \ - writel(before, (adapter->hw.hw_addr + R)); \ -} - -static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) -{ - struct ixgbe_reg_test *test; - u32 value, status_before, status_after; - u32 i, toggle; - - switch (adapter->hw.mac.type) { - case ixgbe_mac_82598EB: - toggle = 0x7FFFF3FF; - test = reg_test_82598; - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - toggle = 0x7FFFF30F; - test = reg_test_82599; - break; - default: - *data = 1; - return 1; - break; - } - - /* - * Because the status register is such a special case, - * we handle it separately from the rest of the register - * tests. Some bits are read-only, some toggle, and some - * are writeable on newer MACs. - */ - status_before = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS); - value = (IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle); - status_after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle; - if (value != status_after) { - e_err(drv, "failed STATUS register test got: " - "0x%08X expected: 0x%08X\n", status_after, value); - *data = 1; - return 1; - } - /* restore previous status */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, status_before); - - /* - * Perform the remainder of the register test, looping through - * the test table until we either fail or reach the null entry. - */ - while (test->reg) { - for (i = 0; i < test->array_len; i++) { - switch (test->test_type) { - case PATTERN_TEST: - REG_PATTERN_TEST(test->reg + (i * 0x40), - test->mask, - test->write); - break; - case SET_READ_TEST: - REG_SET_AND_CHECK(test->reg + (i * 0x40), - test->mask, - test->write); - break; - case WRITE_NO_TEST: - writel(test->write, - (adapter->hw.hw_addr + test->reg) - + (i * 0x40)); - break; - case TABLE32_TEST: - REG_PATTERN_TEST(test->reg + (i * 4), - test->mask, - test->write); - break; - case TABLE64_TEST_LO: - REG_PATTERN_TEST(test->reg + (i * 8), - test->mask, - test->write); - break; - case TABLE64_TEST_HI: - REG_PATTERN_TEST((test->reg + 4) + (i * 8), - test->mask, - test->write); - break; - } - } - test++; - } - - *data = 0; - return 0; -} - -static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data) -{ - if (ixgbe_validate_eeprom_checksum(&adapter->hw, NULL)) - *data = 1; - else - *data = 0; - return *data; -} - -static irqreturn_t ixgbe_test_intr(int irq, void *data) -{ - struct net_device *netdev = data; - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR); - - return IRQ_HANDLED; -} - -static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) -{ - struct net_device *netdev = adapter->netdev; - u32 mask, i = 0, shared_int = true; - u32 irq = adapter->pdev->irq; - - *data = 0; - - /* Hook up test interrupt handler just for this test */ - if (adapter->msix_entries) { - /* NOTE: we don't test MSI-X interrupts here, yet */ - return 0; - } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { - shared_int = false; - if (request_irq(irq, &ixgbe_test_intr, 0, netdev->name, - netdev)) { - *data = 1; - return -1; - } - } else if (!request_irq(irq, &ixgbe_test_intr, IRQF_PROBE_SHARED, - netdev->name, netdev)) { - shared_int = false; - } else if (request_irq(irq, &ixgbe_test_intr, IRQF_SHARED, - netdev->name, netdev)) { - *data = 1; - return -1; - } - e_info(hw, "testing %s interrupt\n", - (shared_int ? "shared" : "unshared")); - - /* Disable all the interrupts */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); - IXGBE_WRITE_FLUSH(&adapter->hw); - usleep_range(10000, 20000); - - /* Test each interrupt */ - for (; i < 10; i++) { - /* Interrupt to test */ - mask = 1 << i; - - if (!shared_int) { - /* - * Disable the interrupts to be reported in - * the cause register and then force the same - * interrupt and see if one gets posted. If - * an interrupt was posted to the bus, the - * test failed. - */ - adapter->test_icr = 0; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, - ~mask & 0x00007FFF); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, - ~mask & 0x00007FFF); - IXGBE_WRITE_FLUSH(&adapter->hw); - usleep_range(10000, 20000); - - if (adapter->test_icr & mask) { - *data = 3; - break; - } - } - - /* - * Enable the interrupt to be reported in the cause - * register and then force the same interrupt and see - * if one gets posted. If an interrupt was not posted - * to the bus, the test failed. - */ - adapter->test_icr = 0; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); - IXGBE_WRITE_FLUSH(&adapter->hw); - usleep_range(10000, 20000); - - if (!(adapter->test_icr & mask)) { - *data = 4; - break; - } - - if (!shared_int) { - /* - * Disable the other interrupts to be reported in - * the cause register and then force the other - * interrupts and see if any get posted. If - * an interrupt was posted to the bus, the - * test failed. - */ - adapter->test_icr = 0; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, - ~mask & 0x00007FFF); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, - ~mask & 0x00007FFF); - IXGBE_WRITE_FLUSH(&adapter->hw); - usleep_range(10000, 20000); - - if (adapter->test_icr) { - *data = 5; - break; - } - } - } - - /* Disable all the interrupts */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); - IXGBE_WRITE_FLUSH(&adapter->hw); - usleep_range(10000, 20000); - - /* Unhook test interrupt handler */ - free_irq(irq, netdev); - - return *data; -} - - - -static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 reg_data; - - /* X540 needs to set the MACC.FLU bit to force link up */ - if (adapter->hw.mac.type == ixgbe_mac_X540) { - reg_data = IXGBE_READ_REG(hw, IXGBE_MACC); - reg_data |= IXGBE_MACC_FLU; - IXGBE_WRITE_REG(hw, IXGBE_MACC, reg_data); - } - - /* right now we only support MAC loopback in the driver */ - reg_data = IXGBE_READ_REG(hw, IXGBE_HLREG0); - /* Setup MAC loopback */ - reg_data |= IXGBE_HLREG0_LPBK; - IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg_data); - - reg_data = IXGBE_READ_REG(hw, IXGBE_FCTRL); - reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg_data); - - reg_data = IXGBE_READ_REG(hw, IXGBE_AUTOC); - reg_data &= ~IXGBE_AUTOC_LMS_MASK; - reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_data); - IXGBE_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - /* Disable Atlas Tx lanes; re-enabled in reset path */ - if (hw->mac.type == ixgbe_mac_82598EB) { - u8 atlas; - - ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas); - atlas |= IXGBE_ATLAS_PDN_TX_REG_EN; - ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas); - - ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas); - atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL; - ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas); - - ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas); - atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL; - ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas); - - ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas); - atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL; - ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas); - } - - return 0; -} - -static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter) -{ - u32 reg_data; - - reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0); - reg_data &= ~IXGBE_HLREG0_LPBK; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data); -} - - - - - - -static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data) -{ - - //*data = ixgbe_setup_desc_rings(adapter); - //if (*data) - // goto out; - *data = ixgbe_setup_loopback_test(adapter); - if (*data) - goto err_loopback; - //*data = ixgbe_run_loopback_test(adapter); - ixgbe_loopback_cleanup(adapter); - -err_loopback: - //ixgbe_free_desc_rings(adapter); -//out: - return *data; - -} - -#ifndef HAVE_ETHTOOL_GET_SSET_COUNT -static int ixgbe_diag_test_count(struct net_device *netdev) -{ - return IXGBE_TEST_LEN; -} - -#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ -static void ixgbe_diag_test(struct net_device *netdev, - struct ethtool_test *eth_test, u64 *data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - bool if_running = netif_running(netdev); - - set_bit(__IXGBE_TESTING, &adapter->state); - if (eth_test->flags == ETH_TEST_FL_OFFLINE) { - /* Offline tests */ - - e_info(hw, "offline testing starting\n"); - - /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ - if (ixgbe_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { - int i; - for (i = 0; i < adapter->num_vfs; i++) { - if (adapter->vfinfo[i].clear_to_send) { - e_warn(drv, "Please take active VFS " - "offline and restart the " - "adapter before running NIC " - "diagnostics\n"); - data[0] = 1; - data[1] = 1; - data[2] = 1; - data[3] = 1; - eth_test->flags |= ETH_TEST_FL_FAILED; - clear_bit(__IXGBE_TESTING, - &adapter->state); - goto skip_ol_tests; - } - } - } - - if (if_running) - /* indicate we're in test mode */ - dev_close(netdev); - else - ixgbe_reset(adapter); - - e_info(hw, "register testing starting\n"); - if (ixgbe_reg_test(adapter, &data[0])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - ixgbe_reset(adapter); - e_info(hw, "eeprom testing starting\n"); - if (ixgbe_eeprom_test(adapter, &data[1])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - ixgbe_reset(adapter); - e_info(hw, "interrupt testing starting\n"); - if (ixgbe_intr_test(adapter, &data[2])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - /* If SRIOV or VMDq is enabled then skip MAC - * loopback diagnostic. */ - if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED | - IXGBE_FLAG_VMDQ_ENABLED)) { - e_info(hw, "skip MAC loopback diagnostic in VT mode\n"); - data[3] = 0; - goto skip_loopback; - } - - ixgbe_reset(adapter); - e_info(hw, "loopback testing starting\n"); - if (ixgbe_loopback_test(adapter, &data[3])) - eth_test->flags |= ETH_TEST_FL_FAILED; - -skip_loopback: - ixgbe_reset(adapter); - - clear_bit(__IXGBE_TESTING, &adapter->state); - if (if_running) - dev_open(netdev); - } else { - e_info(hw, "online testing starting\n"); - /* Online tests */ - if (ixgbe_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - - /* Online tests aren't run; pass by default */ - data[0] = 0; - data[1] = 0; - data[2] = 0; - data[3] = 0; - - clear_bit(__IXGBE_TESTING, &adapter->state); - } -skip_ol_tests: - msleep_interruptible(4 * 1000); -} - -static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter, - struct ethtool_wolinfo *wol) -{ - struct ixgbe_hw *hw = &adapter->hw; - int retval = 1; - u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; - - /* WOL not supported except for the following */ - switch (hw->device_id) { - case IXGBE_DEV_ID_82599_SFP: - /* Only these subdevice could supports WOL */ - switch (hw->subsystem_device_id) { - case IXGBE_SUBDEV_ID_82599_560FLR: - /* only support first port */ - if (hw->bus.func != 0) { - wol->supported = 0; - break; - } - case IXGBE_SUBDEV_ID_82599_SFP: - retval = 0; - break; - default: - wol->supported = 0; - break; - } - break; - case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: - /* All except this subdevice support WOL */ - if (hw->subsystem_device_id == - IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) { - wol->supported = 0; - break; - } - retval = 0; - break; - case IXGBE_DEV_ID_82599_KX4: - retval = 0; - break; - case IXGBE_DEV_ID_X540T: - /* check eeprom to see if enabled wol */ - if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || - ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && - (hw->bus.func == 0))) { - retval = 0; - break; - } - - /* All others not supported */ - wol->supported = 0; - break; - default: - wol->supported = 0; - } - return retval; -} - -static void ixgbe_get_wol(struct net_device *netdev, - struct ethtool_wolinfo *wol) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - wol->supported = WAKE_UCAST | WAKE_MCAST | - WAKE_BCAST | WAKE_MAGIC; - wol->wolopts = 0; - - if (ixgbe_wol_exclusion(adapter, wol) || - !device_can_wakeup(&adapter->pdev->dev)) - return; - - if (adapter->wol & IXGBE_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & IXGBE_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & IXGBE_WUFC_BC) - wol->wolopts |= WAKE_BCAST; - if (adapter->wol & IXGBE_WUFC_MAG) - wol->wolopts |= WAKE_MAGIC; -} - -static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; - - if (ixgbe_wol_exclusion(adapter, wol)) - return wol->wolopts ? -EOPNOTSUPP : 0; - - adapter->wol = 0; - - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= IXGBE_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= IXGBE_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= IXGBE_WUFC_BC; - if (wol->wolopts & WAKE_MAGIC) - adapter->wol |= IXGBE_WUFC_MAG; - - device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); - - return 0; -} - -static int ixgbe_nway_reset(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - if (netif_running(netdev)) - ixgbe_reinit_locked(adapter); - - return 0; -} - -#ifdef HAVE_ETHTOOL_SET_PHYS_ID -static int ixgbe_set_phys_id(struct net_device *netdev, - enum ethtool_phys_id_state state) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - switch (state) { - case ETHTOOL_ID_ACTIVE: - adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - return 2; - - case ETHTOOL_ID_ON: - hw->mac.ops.led_on(hw, IXGBE_LED_ON); - break; - - case ETHTOOL_ID_OFF: - hw->mac.ops.led_off(hw, IXGBE_LED_ON); - break; - - case ETHTOOL_ID_INACTIVE: - /* Restore LED settings */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg); - break; - } - - return 0; -} -#else -static int ixgbe_phys_id(struct net_device *netdev, u32 data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - u32 i; - - if (!data || data > 300) - data = 300; - - for (i = 0; i < (data * 1000); i += 400) { - ixgbe_led_on(hw, IXGBE_LED_ON); - msleep_interruptible(200); - ixgbe_led_off(hw, IXGBE_LED_ON); - msleep_interruptible(200); - } - - /* Restore LED settings */ - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - - return 0; -} -#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ - -static int ixgbe_get_coalesce(struct net_device *netdev, - struct ethtool_coalesce *ec) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit; -#ifndef CONFIG_IXGBE_NAPI - ec->rx_max_coalesced_frames_irq = adapter->rx_work_limit; -#endif /* CONFIG_IXGBE_NAPI */ - /* only valid if in constant ITR mode */ - if (adapter->rx_itr_setting <= 1) - ec->rx_coalesce_usecs = adapter->rx_itr_setting; - else - ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2; - - /* if in mixed tx/rx queues per vector mode, report only rx settings */ - if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) - return 0; - - /* only valid if in constant ITR mode */ - if (adapter->tx_itr_setting <= 1) - ec->tx_coalesce_usecs = adapter->tx_itr_setting; - else - ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2; - - return 0; -} - -/* - * this function must be called before setting the new value of - * rx_itr_setting - */ -#ifdef NO_VNIC -static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - - /* nothing to do if LRO or RSC are not enabled */ - if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) || - !(netdev->features & NETIF_F_LRO)) - return false; - - /* check the feature flag value and enable RSC if necessary */ - if (adapter->rx_itr_setting == 1 || - adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) { - if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - e_info(probe, "rx-usecs value high enough " - "to re-enable RSC\n"); - return true; - } - /* if interrupt rate is too high then disable RSC */ - } else if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { - adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; -#ifdef IXGBE_NO_LRO - e_info(probe, "rx-usecs set too low, disabling RSC\n"); -#else - e_info(probe, "rx-usecs set too low, " - "falling back to software LRO\n"); -#endif - return true; - } - return false; -} -#endif - -static int ixgbe_set_coalesce(struct net_device *netdev, - struct ethtool_coalesce *ec) -{ -#ifdef NO_VNIC - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_q_vector *q_vector; - int i; - int num_vectors; - u16 tx_itr_param, rx_itr_param; - bool need_reset = false; - - /* don't accept tx specific changes if we've got mixed RxTx vectors */ - if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count - && ec->tx_coalesce_usecs) - return -EINVAL; - - if (ec->tx_max_coalesced_frames_irq) - adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq; - -#ifndef CONFIG_IXGBE_NAPI - if (ec->rx_max_coalesced_frames_irq) - adapter->rx_work_limit = ec->rx_max_coalesced_frames_irq; - -#endif - if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) || - (ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2))) - return -EINVAL; - - if (ec->rx_coalesce_usecs > 1) - adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2; - else - adapter->rx_itr_setting = ec->rx_coalesce_usecs; - - if (adapter->rx_itr_setting == 1) - rx_itr_param = IXGBE_20K_ITR; - else - rx_itr_param = adapter->rx_itr_setting; - - if (ec->tx_coalesce_usecs > 1) - adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2; - else - adapter->tx_itr_setting = ec->tx_coalesce_usecs; - - if (adapter->tx_itr_setting == 1) - tx_itr_param = IXGBE_10K_ITR; - else - tx_itr_param = adapter->tx_itr_setting; - - /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_update_rsc(adapter); - - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) - num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; - else - num_vectors = 1; - - for (i = 0; i < num_vectors; i++) { - q_vector = adapter->q_vector[i]; - q_vector->tx.work_limit = adapter->tx_work_limit; - q_vector->rx.work_limit = adapter->rx_work_limit; - if (q_vector->tx.count && !q_vector->rx.count) - /* tx only */ - q_vector->itr = tx_itr_param; - else - /* rx only or mixed */ - q_vector->itr = rx_itr_param; - ixgbe_write_eitr(q_vector); - } - - /* - * do reset here at the end to make sure EITR==0 case is handled - * correctly w.r.t stopping tx, and changing TXDCTL.WTHRESH settings - * also locks in RSC enable/disable which requires reset - */ - if (need_reset) - ixgbe_do_reset(netdev); -#endif - return 0; -} - -#ifndef HAVE_NDO_SET_FEATURES -static u32 ixgbe_get_rx_csum(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_ring *ring = adapter->rx_ring[0]; - return test_bit(__IXGBE_RX_CSUM_ENABLED, &ring->state); -} - -static int ixgbe_set_rx_csum(struct net_device *netdev, u32 data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - int i; - - for (i = 0; i < adapter->num_rx_queues; i++) { - struct ixgbe_ring *ring = adapter->rx_ring[i]; - if (data) - set_bit(__IXGBE_RX_CSUM_ENABLED, &ring->state); - else - clear_bit(__IXGBE_RX_CSUM_ENABLED, &ring->state); - } - - /* LRO and RSC both depend on RX checksum to function */ - if (!data && (netdev->features & NETIF_F_LRO)) { - netdev->features &= ~NETIF_F_LRO; - - if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { - adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; - ixgbe_do_reset(netdev); - } - } - - return 0; -} - -static u32 ixgbe_get_tx_csum(struct net_device *netdev) -{ - return (netdev->features & NETIF_F_IP_CSUM) != 0; -} - -static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - u32 feature_list; - -#ifdef NETIF_F_IPV6_CSUM - feature_list = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; -#else - feature_list = NETIF_F_IP_CSUM; -#endif - switch (adapter->hw.mac.type) { - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - feature_list |= NETIF_F_SCTP_CSUM; - break; - default: - break; - } - if (data) - netdev->features |= feature_list; - else - netdev->features &= ~feature_list; - - return 0; -} - -#ifdef NETIF_F_TSO -static int ixgbe_set_tso(struct net_device *netdev, u32 data) -{ - if (data) { - netdev->features |= NETIF_F_TSO; -#ifdef NETIF_F_TSO6 - netdev->features |= NETIF_F_TSO6; -#endif - } else { -#ifndef HAVE_NETDEV_VLAN_FEATURES -#ifdef NETIF_F_HW_VLAN_TX - struct ixgbe_adapter *adapter = netdev_priv(netdev); - /* disable TSO on all VLANs if they're present */ - if (adapter->vlgrp) { - int i; - struct net_device *v_netdev; - for (i = 0; i < VLAN_N_VID; i++) { - v_netdev = - vlan_group_get_device(adapter->vlgrp, i); - if (v_netdev) { - v_netdev->features &= ~NETIF_F_TSO; -#ifdef NETIF_F_TSO6 - v_netdev->features &= ~NETIF_F_TSO6; -#endif - vlan_group_set_device(adapter->vlgrp, i, - v_netdev); - } - } - } -#endif -#endif /* HAVE_NETDEV_VLAN_FEATURES */ - netdev->features &= ~NETIF_F_TSO; -#ifdef NETIF_F_TSO6 - netdev->features &= ~NETIF_F_TSO6; -#endif - } - return 0; -} - -#endif /* NETIF_F_TSO */ -#ifdef ETHTOOL_GFLAGS -static int ixgbe_set_flags(struct net_device *netdev, u32 data) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - u32 supported_flags = ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN; - u32 changed = netdev->features ^ data; - bool need_reset = false; - int rc; - -#ifndef HAVE_VLAN_RX_REGISTER - if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && - !(data & ETH_FLAG_RXVLAN)) - return -EINVAL; - -#endif -#ifdef NETIF_F_RXHASH - if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) - supported_flags |= ETH_FLAG_RXHASH; -#endif -#ifdef IXGBE_NO_LRO - if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) -#endif - supported_flags |= ETH_FLAG_LRO; - -#ifdef ETHTOOL_GRXRINGS - switch (adapter->hw.mac.type) { - case ixgbe_mac_X540: - case ixgbe_mac_82599EB: - supported_flags |= ETH_FLAG_NTUPLE; - default: - break; - } - -#endif - rc = ethtool_op_set_flags(netdev, data, supported_flags); - if (rc) - return rc; - -#ifndef HAVE_VLAN_RX_REGISTER - if (changed & ETH_FLAG_RXVLAN) - ixgbe_vlan_mode(netdev, netdev->features); - -#endif - /* if state changes we need to update adapter->flags and reset */ - if (!(netdev->features & NETIF_F_LRO)) { - if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) - need_reset = true; - adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; - } else if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) && - !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { - if (adapter->rx_itr_setting == 1 || - adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) { - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - need_reset = true; - } else if (changed & ETH_FLAG_LRO) { -#ifdef IXGBE_NO_LRO - e_info(probe, "rx-usecs set too low, " - "disabling RSC\n"); -#else - e_info(probe, "rx-usecs set too low, " - "falling back to software LRO\n"); -#endif - } - } - -#ifdef ETHTOOL_GRXRINGS - /* - * Check if Flow Director n-tuple support was enabled or disabled. If - * the state changed, we need to reset. - */ - if (!(netdev->features & NETIF_F_NTUPLE)) { - if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { - /* turn off Flow Director, set ATR and reset */ - if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) && - !(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) - adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; - need_reset = true; - } - adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; - } else if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) { - /* turn off ATR, enable perfect filters and reset */ - adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; - adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; - need_reset = true; - } - -#endif /* ETHTOOL_GRXRINGS */ - if (need_reset) - ixgbe_do_reset(netdev); - - return 0; -} - -#endif /* ETHTOOL_GFLAGS */ -#endif /* HAVE_NDO_SET_FEATURES */ -#ifdef ETHTOOL_GRXRINGS -static int ixgbe_get_ethtool_fdir_entry(struct ixgbe_adapter *adapter, - struct ethtool_rxnfc *cmd) -{ - union ixgbe_atr_input *mask = &adapter->fdir_mask; - struct ethtool_rx_flow_spec *fsp = - (struct ethtool_rx_flow_spec *)&cmd->fs; - struct hlist_node *node, *node2; - struct ixgbe_fdir_filter *rule = NULL; - - /* report total rule count */ - cmd->data = (1024 << adapter->fdir_pballoc) - 2; - - hlist_for_each_entry_safe(rule, node, node2, - &adapter->fdir_filter_list, fdir_node) { - if (fsp->location <= rule->sw_idx) - break; - } - - if (!rule || fsp->location != rule->sw_idx) - return -EINVAL; - - /* fill out the flow spec entry */ - - /* set flow type field */ - switch (rule->filter.formatted.flow_type) { - case IXGBE_ATR_FLOW_TYPE_TCPV4: - fsp->flow_type = TCP_V4_FLOW; - break; - case IXGBE_ATR_FLOW_TYPE_UDPV4: - fsp->flow_type = UDP_V4_FLOW; - break; - case IXGBE_ATR_FLOW_TYPE_SCTPV4: - fsp->flow_type = SCTP_V4_FLOW; - break; - case IXGBE_ATR_FLOW_TYPE_IPV4: - fsp->flow_type = IP_USER_FLOW; - fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4; - fsp->h_u.usr_ip4_spec.proto = 0; - fsp->m_u.usr_ip4_spec.proto = 0; - break; - default: - return -EINVAL; - } - - fsp->h_u.tcp_ip4_spec.psrc = rule->filter.formatted.src_port; - fsp->m_u.tcp_ip4_spec.psrc = mask->formatted.src_port; - fsp->h_u.tcp_ip4_spec.pdst = rule->filter.formatted.dst_port; - fsp->m_u.tcp_ip4_spec.pdst = mask->formatted.dst_port; - fsp->h_u.tcp_ip4_spec.ip4src = rule->filter.formatted.src_ip[0]; - fsp->m_u.tcp_ip4_spec.ip4src = mask->formatted.src_ip[0]; - fsp->h_u.tcp_ip4_spec.ip4dst = rule->filter.formatted.dst_ip[0]; - fsp->m_u.tcp_ip4_spec.ip4dst = mask->formatted.dst_ip[0]; - fsp->h_ext.vlan_tci = rule->filter.formatted.vlan_id; - fsp->m_ext.vlan_tci = mask->formatted.vlan_id; - fsp->h_ext.vlan_etype = rule->filter.formatted.flex_bytes; - fsp->m_ext.vlan_etype = mask->formatted.flex_bytes; - fsp->h_ext.data[1] = htonl(rule->filter.formatted.vm_pool); - fsp->m_ext.data[1] = htonl(mask->formatted.vm_pool); - fsp->flow_type |= FLOW_EXT; - - /* record action */ - if (rule->action == IXGBE_FDIR_DROP_QUEUE) - fsp->ring_cookie = RX_CLS_FLOW_DISC; - else - fsp->ring_cookie = rule->action; - - return 0; -} - -static int ixgbe_get_ethtool_fdir_all(struct ixgbe_adapter *adapter, - struct ethtool_rxnfc *cmd, - u32 *rule_locs) -{ - struct hlist_node *node, *node2; - struct ixgbe_fdir_filter *rule; - int cnt = 0; - - /* report total rule count */ - cmd->data = (1024 << adapter->fdir_pballoc) - 2; - - hlist_for_each_entry_safe(rule, node, node2, - &adapter->fdir_filter_list, fdir_node) { - if (cnt == cmd->rule_cnt) - return -EMSGSIZE; - rule_locs[cnt] = rule->sw_idx; - cnt++; - } - - cmd->rule_cnt = cnt; - - return 0; -} - -static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter, - struct ethtool_rxnfc *cmd) -{ - cmd->data = 0; - - /* if RSS is disabled then report no hashing */ - if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) - return 0; - - /* Report default options for RSS on ixgbe */ - switch (cmd->flow_type) { - case TCP_V4_FLOW: - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case UDP_V4_FLOW: - if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP) - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case SCTP_V4_FLOW: - case AH_ESP_V4_FLOW: - case AH_V4_FLOW: - case ESP_V4_FLOW: - case IPV4_FLOW: - cmd->data |= RXH_IP_SRC | RXH_IP_DST; - break; - case TCP_V6_FLOW: - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case UDP_V6_FLOW: - if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) - cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; - case SCTP_V6_FLOW: - case AH_ESP_V6_FLOW: - case AH_V6_FLOW: - case ESP_V6_FLOW: - case IPV6_FLOW: - cmd->data |= RXH_IP_SRC | RXH_IP_DST; - break; - default: - return -EINVAL; - } - - return 0; -} - -static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, -#ifdef HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS - void *rule_locs) -#else - u32 *rule_locs) -#endif -{ - struct ixgbe_adapter *adapter = netdev_priv(dev); - int ret = -EOPNOTSUPP; - - switch (cmd->cmd) { - case ETHTOOL_GRXRINGS: - cmd->data = adapter->num_rx_queues; - ret = 0; - break; - case ETHTOOL_GRXCLSRLCNT: - cmd->rule_cnt = adapter->fdir_filter_count; - ret = 0; - break; - case ETHTOOL_GRXCLSRULE: - ret = ixgbe_get_ethtool_fdir_entry(adapter, cmd); - break; - case ETHTOOL_GRXCLSRLALL: - ret = ixgbe_get_ethtool_fdir_all(adapter, cmd, - rule_locs); - break; - case ETHTOOL_GRXFH: - ret = ixgbe_get_rss_hash_opts(adapter, cmd); - break; - default: - break; - } - - return ret; -} - -static int ixgbe_update_ethtool_fdir_entry(struct ixgbe_adapter *adapter, - struct ixgbe_fdir_filter *input, - u16 sw_idx) -{ - struct ixgbe_hw *hw = &adapter->hw; - struct hlist_node *node, *node2, *parent; - struct ixgbe_fdir_filter *rule; - int err = -EINVAL; - - parent = NULL; - rule = NULL; - - hlist_for_each_entry_safe(rule, node, node2, - &adapter->fdir_filter_list, fdir_node) { - /* hash found, or no matching entry */ - if (rule->sw_idx >= sw_idx) - break; - parent = node; - } - - /* if there is an old rule occupying our place remove it */ - if (rule && (rule->sw_idx == sw_idx)) { - if (!input || (rule->filter.formatted.bkt_hash != - input->filter.formatted.bkt_hash)) { - err = ixgbe_fdir_erase_perfect_filter_82599(hw, - &rule->filter, - sw_idx); - } - - hlist_del(&rule->fdir_node); - kfree(rule); - adapter->fdir_filter_count--; - } - - /* - * If no input this was a delete, err should be 0 if a rule was - * successfully found and removed from the list else -EINVAL - */ - if (!input) - return err; - - /* initialize node and set software index */ - INIT_HLIST_NODE(&input->fdir_node); - - /* add filter to the list */ - if (parent) - hlist_add_after(parent, &input->fdir_node); - else - hlist_add_head(&input->fdir_node, - &adapter->fdir_filter_list); - - /* update counts */ - adapter->fdir_filter_count++; - - return 0; -} - -static int ixgbe_flowspec_to_flow_type(struct ethtool_rx_flow_spec *fsp, - u8 *flow_type) -{ - switch (fsp->flow_type & ~FLOW_EXT) { - case TCP_V4_FLOW: - *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; - break; - case UDP_V4_FLOW: - *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4; - break; - case SCTP_V4_FLOW: - *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4; - break; - case IP_USER_FLOW: - switch (fsp->h_u.usr_ip4_spec.proto) { - case IPPROTO_TCP: - *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; - break; - case IPPROTO_UDP: - *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4; - break; - case IPPROTO_SCTP: - *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4; - break; - case 0: - if (!fsp->m_u.usr_ip4_spec.proto) { - *flow_type = IXGBE_ATR_FLOW_TYPE_IPV4; - break; - } - default: - return 0; - } - break; - default: - return 0; - } - - return 1; -} - -static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter, - struct ethtool_rxnfc *cmd) -{ - struct ethtool_rx_flow_spec *fsp = - (struct ethtool_rx_flow_spec *)&cmd->fs; - struct ixgbe_hw *hw = &adapter->hw; - struct ixgbe_fdir_filter *input; - union ixgbe_atr_input mask; - int err; - - if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) - return -EOPNOTSUPP; - - /* - * Don't allow programming if the action is a queue greater than - * the number of online Rx queues. - */ - if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) && - (fsp->ring_cookie >= adapter->num_rx_queues)) - return -EINVAL; - - /* Don't allow indexes to exist outside of available space */ - if (fsp->location >= ((1024 << adapter->fdir_pballoc) - 2)) { - e_err(drv, "Location out of range\n"); - return -EINVAL; - } - - input = kzalloc(sizeof(*input), GFP_ATOMIC); - if (!input) - return -ENOMEM; - - memset(&mask, 0, sizeof(union ixgbe_atr_input)); - - /* set SW index */ - input->sw_idx = fsp->location; - - /* record flow type */ - if (!ixgbe_flowspec_to_flow_type(fsp, - &input->filter.formatted.flow_type)) { - e_err(drv, "Unrecognized flow type\n"); - goto err_out; - } - - mask.formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | - IXGBE_ATR_L4TYPE_MASK; - - if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4) - mask.formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK; - - /* Copy input into formatted structures */ - input->filter.formatted.src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src; - mask.formatted.src_ip[0] = fsp->m_u.tcp_ip4_spec.ip4src; - input->filter.formatted.dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst; - mask.formatted.dst_ip[0] = fsp->m_u.tcp_ip4_spec.ip4dst; - input->filter.formatted.src_port = fsp->h_u.tcp_ip4_spec.psrc; - mask.formatted.src_port = fsp->m_u.tcp_ip4_spec.psrc; - input->filter.formatted.dst_port = fsp->h_u.tcp_ip4_spec.pdst; - mask.formatted.dst_port = fsp->m_u.tcp_ip4_spec.pdst; - - if (fsp->flow_type & FLOW_EXT) { - input->filter.formatted.vm_pool = - (unsigned char)ntohl(fsp->h_ext.data[1]); - mask.formatted.vm_pool = - (unsigned char)ntohl(fsp->m_ext.data[1]); - input->filter.formatted.vlan_id = fsp->h_ext.vlan_tci; - mask.formatted.vlan_id = fsp->m_ext.vlan_tci; - input->filter.formatted.flex_bytes = - fsp->h_ext.vlan_etype; - mask.formatted.flex_bytes = fsp->m_ext.vlan_etype; - } - - /* determine if we need to drop or route the packet */ - if (fsp->ring_cookie == RX_CLS_FLOW_DISC) - input->action = IXGBE_FDIR_DROP_QUEUE; - else - input->action = fsp->ring_cookie; - - spin_lock(&adapter->fdir_perfect_lock); - - if (hlist_empty(&adapter->fdir_filter_list)) { - /* save mask and program input mask into HW */ - memcpy(&adapter->fdir_mask, &mask, sizeof(mask)); - err = ixgbe_fdir_set_input_mask_82599(hw, &mask); - if (err) { - e_err(drv, "Error writing mask\n"); - goto err_out_w_lock; - } - } else if (memcmp(&adapter->fdir_mask, &mask, sizeof(mask))) { - e_err(drv, "Only one mask supported per port\n"); - goto err_out_w_lock; - } - - /* apply mask and compute/store hash */ - ixgbe_atr_compute_perfect_hash_82599(&input->filter, &mask); - - /* program filters to filter memory */ - err = ixgbe_fdir_write_perfect_filter_82599(hw, - &input->filter, input->sw_idx, - (input->action == IXGBE_FDIR_DROP_QUEUE) ? - IXGBE_FDIR_DROP_QUEUE : - adapter->rx_ring[input->action]->reg_idx); - if (err) - goto err_out_w_lock; - - ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx); - - spin_unlock(&adapter->fdir_perfect_lock); - - kfree(input); - return err; -err_out_w_lock: - spin_unlock(&adapter->fdir_perfect_lock); -err_out: - kfree(input); - return -EINVAL; -} - -static int ixgbe_del_ethtool_fdir_entry(struct ixgbe_adapter *adapter, - struct ethtool_rxnfc *cmd) -{ - struct ethtool_rx_flow_spec *fsp = - (struct ethtool_rx_flow_spec *)&cmd->fs; - int err; - - spin_lock(&adapter->fdir_perfect_lock); - err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, (u16)(fsp->location)); - spin_unlock(&adapter->fdir_perfect_lock); - - return err; -} - -#ifdef ETHTOOL_SRXNTUPLE -/* - * We need to keep this around for kernels 2.6.33 - 2.6.39 in order to avoid - * a null pointer dereference as it was assumend if the NETIF_F_NTUPLE flag - * was defined that this function was present. - */ -static int ixgbe_set_rx_ntuple(struct net_device *dev, - struct ethtool_rx_ntuple *cmd) -{ - return -EOPNOTSUPP; -} - -#endif -#define UDP_RSS_FLAGS (IXGBE_FLAG2_RSS_FIELD_IPV4_UDP | \ - IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) -static int ixgbe_set_rss_hash_opt(struct ixgbe_adapter *adapter, - struct ethtool_rxnfc *nfc) -{ - u32 flags2 = adapter->flags2; - - /* - * RSS does not support anything other than hashing - * to queues on src and dst IPs and ports - */ - if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST | - RXH_L4_B_0_1 | RXH_L4_B_2_3)) - return -EINVAL; - - switch (nfc->flow_type) { - case TCP_V4_FLOW: - case TCP_V6_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST) || - !(nfc->data & RXH_L4_B_0_1) || - !(nfc->data & RXH_L4_B_2_3)) - return -EINVAL; - break; - case UDP_V4_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST)) - return -EINVAL; - switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { - case 0: - flags2 &= ~IXGBE_FLAG2_RSS_FIELD_IPV4_UDP; - break; - case (RXH_L4_B_0_1 | RXH_L4_B_2_3): - flags2 |= IXGBE_FLAG2_RSS_FIELD_IPV4_UDP; - break; - default: - return -EINVAL; - } - break; - case UDP_V6_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST)) - return -EINVAL; - switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { - case 0: - flags2 &= ~IXGBE_FLAG2_RSS_FIELD_IPV6_UDP; - break; - case (RXH_L4_B_0_1 | RXH_L4_B_2_3): - flags2 |= IXGBE_FLAG2_RSS_FIELD_IPV6_UDP; - break; - default: - return -EINVAL; - } - break; - case AH_ESP_V4_FLOW: - case AH_V4_FLOW: - case ESP_V4_FLOW: - case SCTP_V4_FLOW: - case AH_ESP_V6_FLOW: - case AH_V6_FLOW: - case ESP_V6_FLOW: - case SCTP_V6_FLOW: - if (!(nfc->data & RXH_IP_SRC) || - !(nfc->data & RXH_IP_DST) || - (nfc->data & RXH_L4_B_0_1) || - (nfc->data & RXH_L4_B_2_3)) - return -EINVAL; - break; - default: - return -EINVAL; - } - - /* if we changed something we need to update flags */ - if (flags2 != adapter->flags2) { - struct ixgbe_hw *hw = &adapter->hw; - u32 mrqc = IXGBE_READ_REG(hw, IXGBE_MRQC); - - if ((flags2 & UDP_RSS_FLAGS) && - !(adapter->flags2 & UDP_RSS_FLAGS)) - e_warn(drv, "enabling UDP RSS: fragmented packets" - " may arrive out of order to the stack above\n"); - - adapter->flags2 = flags2; - - /* Perform hash on these packet types */ - mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4 - | IXGBE_MRQC_RSS_FIELD_IPV4_TCP - | IXGBE_MRQC_RSS_FIELD_IPV6 - | IXGBE_MRQC_RSS_FIELD_IPV6_TCP; - - mrqc &= ~(IXGBE_MRQC_RSS_FIELD_IPV4_UDP | - IXGBE_MRQC_RSS_FIELD_IPV6_UDP); - - if (flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP) - mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP; - - if (flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) - mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP; - - IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); - } - - return 0; -} - -static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) -{ - struct ixgbe_adapter *adapter = netdev_priv(dev); - int ret = -EOPNOTSUPP; - - switch (cmd->cmd) { - case ETHTOOL_SRXCLSRLINS: - ret = ixgbe_add_ethtool_fdir_entry(adapter, cmd); - break; - case ETHTOOL_SRXCLSRLDEL: - ret = ixgbe_del_ethtool_fdir_entry(adapter, cmd); - break; - case ETHTOOL_SRXFH: - ret = ixgbe_set_rss_hash_opt(adapter, cmd); - break; - default: - break; - } - - return ret; -} - -#endif /* ETHTOOL_GRXRINGS */ -//static -struct ethtool_ops ixgbe_ethtool_ops = { -#ifndef ETHTOOL_GLINKSETTINGS - .get_settings = ixgbe_get_settings, -#endif -#ifndef ETHTOOL_SLINKSETTINGS - .set_settings = ixgbe_set_settings, -#endif - .get_drvinfo = ixgbe_get_drvinfo, - .get_regs_len = ixgbe_get_regs_len, - .get_regs = ixgbe_get_regs, - .get_wol = ixgbe_get_wol, - .set_wol = ixgbe_set_wol, - .nway_reset = ixgbe_nway_reset, - .get_link = ethtool_op_get_link, - .get_eeprom_len = ixgbe_get_eeprom_len, - .get_eeprom = ixgbe_get_eeprom, - .set_eeprom = ixgbe_set_eeprom, - .get_ringparam = ixgbe_get_ringparam, - .set_ringparam = ixgbe_set_ringparam, - .get_pauseparam = ixgbe_get_pauseparam, - .set_pauseparam = ixgbe_set_pauseparam, - .get_msglevel = ixgbe_get_msglevel, - .set_msglevel = ixgbe_set_msglevel, -#ifndef HAVE_ETHTOOL_GET_SSET_COUNT - .self_test_count = ixgbe_diag_test_count, -#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ - .self_test = ixgbe_diag_test, - .get_strings = ixgbe_get_strings, -#ifdef HAVE_ETHTOOL_SET_PHYS_ID - .set_phys_id = ixgbe_set_phys_id, -#else - .phys_id = ixgbe_phys_id, -#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ -#ifndef HAVE_ETHTOOL_GET_SSET_COUNT - .get_stats_count = ixgbe_get_stats_count, -#else /* HAVE_ETHTOOL_GET_SSET_COUNT */ - .get_sset_count = ixgbe_get_sset_count, -#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ - .get_ethtool_stats = ixgbe_get_ethtool_stats, -#ifdef HAVE_ETHTOOL_GET_PERM_ADDR - .get_perm_addr = ethtool_op_get_perm_addr, -#endif - .get_coalesce = ixgbe_get_coalesce, - .set_coalesce = ixgbe_set_coalesce, -#ifndef HAVE_NDO_SET_FEATURES - .get_rx_csum = ixgbe_get_rx_csum, - .set_rx_csum = ixgbe_set_rx_csum, - .get_tx_csum = ixgbe_get_tx_csum, - .set_tx_csum = ixgbe_set_tx_csum, - .get_sg = ethtool_op_get_sg, - .set_sg = ethtool_op_set_sg, -#ifdef NETIF_F_TSO - .get_tso = ethtool_op_get_tso, - .set_tso = ixgbe_set_tso, -#endif -#ifdef ETHTOOL_GFLAGS - .get_flags = ethtool_op_get_flags, - .set_flags = ixgbe_set_flags, -#endif -#endif /* HAVE_NDO_SET_FEATURES */ -#ifdef ETHTOOL_GRXRINGS - .get_rxnfc = ixgbe_get_rxnfc, - .set_rxnfc = ixgbe_set_rxnfc, -#ifdef ETHTOOL_SRXNTUPLE - .set_rx_ntuple = ixgbe_set_rx_ntuple, -#endif -#endif -}; - -void ixgbe_set_ethtool_ops(struct net_device *netdev) -{ - SET_ETHTOOL_OPS(netdev, &ixgbe_ethtool_ops); -} -#endif /* SIOCETHTOOL */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h deleted file mode 100644 index eec86cbb32..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_FCOE_H -#define _IXGBE_FCOE_H - -#ifdef IXGBE_FCOE - -#include -#include - -/* shift bits within STAT fo FCSTAT */ -#define IXGBE_RXDADV_FCSTAT_SHIFT 4 - -/* ddp user buffer */ -#define IXGBE_BUFFCNT_MAX 256 /* 8 bits bufcnt */ -#define IXGBE_FCPTR_ALIGN 16 -#define IXGBE_FCPTR_MAX (IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t)) -#define IXGBE_FCBUFF_4KB 0x0 -#define IXGBE_FCBUFF_8KB 0x1 -#define IXGBE_FCBUFF_16KB 0x2 -#define IXGBE_FCBUFF_64KB 0x3 -#define IXGBE_FCBUFF_MAX 65536 /* 64KB max */ -#define IXGBE_FCBUFF_MIN 4096 /* 4KB min */ -#define IXGBE_FCOE_DDP_MAX 512 /* 9 bits xid */ - -/* Default traffic class to use for FCoE */ -#define IXGBE_FCOE_DEFTC 3 - -/* fcerr */ -#define IXGBE_FCERR_BADCRC 0x00100000 -#define IXGBE_FCERR_EOFSOF 0x00200000 -#define IXGBE_FCERR_NOFIRST 0x00300000 -#define IXGBE_FCERR_OOOSEQ 0x00400000 -#define IXGBE_FCERR_NODMA 0x00500000 -#define IXGBE_FCERR_PKTLOST 0x00600000 - -/* FCoE DDP for target mode */ -#define __IXGBE_FCOE_TARGET 1 - -struct ixgbe_fcoe_ddp { - int len; - u32 err; - unsigned int sgc; - struct scatterlist *sgl; - dma_addr_t udp; - u64 *udl; - struct pci_pool *pool; -}; - -struct ixgbe_fcoe { - struct pci_pool **pool; - atomic_t refcnt; - spinlock_t lock; - struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX]; - unsigned char *extra_ddp_buffer; - dma_addr_t extra_ddp_buffer_dma; - u64 __percpu *pcpu_noddp; - u64 __percpu *pcpu_noddp_ext_buff; - unsigned long mode; - u8 tc; - u8 up; - u8 up_set; -}; -#endif /* IXGBE_FCOE */ - -#endif /* _IXGBE_FCOE_H */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c deleted file mode 100644 index a5acf19c51..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c +++ /dev/null @@ -1,2951 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/****************************************************************************** - Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code -******************************************************************************/ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef HAVE_SCTP -#include -#endif -#include -#include -#ifdef NETIF_F_TSO -#include -#ifdef NETIF_F_TSO6 -#include -#endif -#endif -#ifdef SIOCETHTOOL -#include -#endif - -#include "ixgbe.h" - -#undef CONFIG_DCA -#undef CONFIG_DCA_MODULE - -char ixgbe_driver_name[] = "ixgbe"; -#define DRV_HW_PERF - -#ifndef CONFIG_IXGBE_NAPI -#define DRIVERNAPI -#else -#define DRIVERNAPI "-NAPI" -#endif - -#define FPGA - -#define VMDQ_TAG - -#define MAJ 3 -#define MIN 9 -#define BUILD 17 -#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ - __stringify(BUILD) DRIVERNAPI DRV_HW_PERF FPGA VMDQ_TAG -const char ixgbe_driver_version[] = DRV_VERSION; - -/* ixgbe_pci_tbl - PCI Device ID Table - * - * Wildcard entries (PCI_ANY_ID) should come last - * Last entry must be all 0s - * - * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, - * Class, Class Mask, private data (not used) } - */ -const struct pci_device_id ixgbe_pci_tbl[] = { - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP)}, - {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP)}, - /* required last entry */ - {0, } -}; - -#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) -static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, - void *p); -static struct notifier_block dca_notifier = { - .notifier_call = ixgbe_notify_dca, - .next = NULL, - .priority = 0 -}; - -#endif -MODULE_AUTHOR("Intel Corporation, "); -MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -#define DEFAULT_DEBUG_LEVEL_SHIFT 3 - - -static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter) -{ - u32 ctrl_ext; - - /* Let firmware take over control of h/w */ - ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, - ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); -} - -#ifdef NO_VNIC -static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) -{ - u32 ctrl_ext; - - /* Let firmware know the driver has taken over */ - ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, - ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); -} -#endif - - -static void ixgbe_update_xoff_rx_lfc(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - struct ixgbe_hw_stats *hwstats = &adapter->stats; - int i; - u32 data; - - if ((hw->fc.current_mode != ixgbe_fc_full) && - (hw->fc.current_mode != ixgbe_fc_rx_pause)) - return; - - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); - break; - default: - data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); - } - hwstats->lxoffrxc += data; - - /* refill credits (no tx hang) if we received xoff */ - if (!data) - return; - - for (i = 0; i < adapter->num_tx_queues; i++) - clear_bit(__IXGBE_HANG_CHECK_ARMED, - &adapter->tx_ring[i]->state); -} - -static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - struct ixgbe_hw_stats *hwstats = &adapter->stats; - u32 xoff[8] = {0}; - int i; - bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; - -#ifdef HAVE_DCBNL_IEEE - if (adapter->ixgbe_ieee_pfc) - pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); - -#endif - if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED) || !pfc_en) { - ixgbe_update_xoff_rx_lfc(adapter); - return; - } - - /* update stats for each tc, only valid with PFC enabled */ - for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); - break; - default: - xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); - } - hwstats->pxoffrxc[i] += xoff[i]; - } - - /* disarm tx queues that have received xoff frames */ - for (i = 0; i < adapter->num_tx_queues; i++) { - struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; - u8 tc = tx_ring->dcb_tc; - - if ((tc <= 7) && (xoff[tc])) - clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); - } -} - - - - -#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 - - - - -#ifdef HAVE_8021P_SUPPORT -/** - * ixgbe_vlan_stripping_disable - helper to disable vlan tag stripping - * @adapter: driver data - */ -void ixgbe_vlan_stripping_disable(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 vlnctrl; - int i; - - /* leave vlan tag stripping enabled for DCB */ - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) - return; - - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - vlnctrl &= ~IXGBE_VLNCTRL_VME; - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - for (i = 0; i < adapter->num_rx_queues; i++) { - u8 reg_idx = adapter->rx_ring[i]->reg_idx; - vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); - vlnctrl &= ~IXGBE_RXDCTL_VME; - IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), vlnctrl); - } - break; - default: - break; - } -} - -#endif -/** - * ixgbe_vlan_stripping_enable - helper to enable vlan tag stripping - * @adapter: driver data - */ -void ixgbe_vlan_stripping_enable(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 vlnctrl; - int i; - - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - vlnctrl |= IXGBE_VLNCTRL_VME; - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - for (i = 0; i < adapter->num_rx_queues; i++) { - u8 reg_idx = adapter->rx_ring[i]->reg_idx; - vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); - vlnctrl |= IXGBE_RXDCTL_VME; - IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), vlnctrl); - } - break; - default: - break; - } -} - -#ifdef HAVE_VLAN_RX_REGISTER -void ixgbe_vlan_mode(struct net_device *netdev, struct vlan_group *grp) -#else -void ixgbe_vlan_mode(struct net_device *netdev, u32 features) -#endif -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); -#ifdef HAVE_8021P_SUPPORT - bool enable; -#endif -#ifdef HAVE_VLAN_RX_REGISTER - - //if (!test_bit(__IXGBE_DOWN, &adapter->state)) - // ixgbe_irq_disable(adapter); - - adapter->vlgrp = grp; - - //if (!test_bit(__IXGBE_DOWN, &adapter->state)) - // ixgbe_irq_enable(adapter, true, true); -#endif -#ifdef HAVE_8021P_SUPPORT -#ifdef HAVE_VLAN_RX_REGISTER - enable = (grp || (adapter->flags & IXGBE_FLAG_DCB_ENABLED)); -#else - enable = !!(features & NETIF_F_HW_VLAN_RX); -#endif - if (enable) - /* enable VLAN tag insert/strip */ - ixgbe_vlan_stripping_enable(adapter); - else - /* disable VLAN tag insert/strip */ - ixgbe_vlan_stripping_disable(adapter); - -#endif -} - -static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq) -{ -#ifdef NETDEV_HW_ADDR_T_MULTICAST - struct netdev_hw_addr *mc_ptr; -#else - struct dev_mc_list *mc_ptr; -#endif - struct ixgbe_adapter *adapter = hw->back; - u8 *addr = *mc_addr_ptr; - - *vmdq = adapter->num_vfs; - -#ifdef NETDEV_HW_ADDR_T_MULTICAST - mc_ptr = container_of(addr, struct netdev_hw_addr, addr[0]); - if (mc_ptr->list.next) { - struct netdev_hw_addr *ha; - - ha = list_entry(mc_ptr->list.next, struct netdev_hw_addr, list); - *mc_addr_ptr = ha->addr; - } -#else - mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]); - if (mc_ptr->next) - *mc_addr_ptr = mc_ptr->next->dmi_addr; -#endif - else - *mc_addr_ptr = NULL; - - return addr; -} - -/** - * ixgbe_write_mc_addr_list - write multicast addresses to MTA - * @netdev: network interface device structure - * - * Writes multicast address list to the MTA hash table. - * Returns: -ENOMEM on failure - * 0 on no addresses written - * X on writing X addresses to MTA - **/ -int ixgbe_write_mc_addr_list(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; -#ifdef NETDEV_HW_ADDR_T_MULTICAST - struct netdev_hw_addr *ha; -#endif - u8 *addr_list = NULL; - int addr_count = 0; - - if (!hw->mac.ops.update_mc_addr_list) - return -ENOMEM; - - if (!netif_running(netdev)) - return 0; - - - hw->mac.ops.update_mc_addr_list(hw, NULL, 0, - ixgbe_addr_list_itr, true); - - if (!netdev_mc_empty(netdev)) { -#ifdef NETDEV_HW_ADDR_T_MULTICAST - ha = list_first_entry(&netdev->mc.list, - struct netdev_hw_addr, list); - addr_list = ha->addr; -#else - addr_list = netdev->mc_list->dmi_addr; -#endif - addr_count = netdev_mc_count(netdev); - - hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count, - ixgbe_addr_list_itr, false); - } - -#ifdef CONFIG_PCI_IOV - //ixgbe_restore_vf_multicasts(adapter); -#endif - return addr_count; -} - - -void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - int i; - for (i = 0; i < hw->mac.num_rar_entries; i++) { - if (adapter->mac_table[i].state & IXGBE_MAC_STATE_IN_USE) { - hw->mac.ops.set_rar(hw, i, adapter->mac_table[i].addr, - adapter->mac_table[i].queue, - IXGBE_RAH_AV); - } else { - hw->mac.ops.clear_rar(hw, i); - } - } -} - -void ixgbe_sync_mac_table(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - int i; - for (i = 0; i < hw->mac.num_rar_entries; i++) { - if (adapter->mac_table[i].state & IXGBE_MAC_STATE_MODIFIED) { - if (adapter->mac_table[i].state & - IXGBE_MAC_STATE_IN_USE) { - hw->mac.ops.set_rar(hw, i, - adapter->mac_table[i].addr, - adapter->mac_table[i].queue, - IXGBE_RAH_AV); - } else { - hw->mac.ops.clear_rar(hw, i); - } - adapter->mac_table[i].state &= - ~(IXGBE_MAC_STATE_MODIFIED); - } - } -} - -int ixgbe_available_rars(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - int i, count = 0; - - for (i = 0; i < hw->mac.num_rar_entries; i++) { - if (adapter->mac_table[i].state == 0) - count++; - } - return count; -} - -int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, u8 *addr, u16 queue) -{ - struct ixgbe_hw *hw = &adapter->hw; - int i; - - if (is_zero_ether_addr(addr)) - return 0; - - for (i = 0; i < hw->mac.num_rar_entries; i++) { - if (adapter->mac_table[i].state & IXGBE_MAC_STATE_IN_USE) - continue; - adapter->mac_table[i].state |= (IXGBE_MAC_STATE_MODIFIED | - IXGBE_MAC_STATE_IN_USE); - memcpy(adapter->mac_table[i].addr, addr, ETH_ALEN); - adapter->mac_table[i].queue = queue; - ixgbe_sync_mac_table(adapter); - return i; - } - return -ENOMEM; -} - -void ixgbe_flush_sw_mac_table(struct ixgbe_adapter *adapter) -{ - int i; - struct ixgbe_hw *hw = &adapter->hw; - - for (i = 0; i < hw->mac.num_rar_entries; i++) { - adapter->mac_table[i].state |= IXGBE_MAC_STATE_MODIFIED; - adapter->mac_table[i].state &= ~IXGBE_MAC_STATE_IN_USE; - memset(adapter->mac_table[i].addr, 0, ETH_ALEN); - adapter->mac_table[i].queue = 0; - } - ixgbe_sync_mac_table(adapter); -} - -void ixgbe_del_mac_filter_by_index(struct ixgbe_adapter *adapter, int index) -{ - adapter->mac_table[index].state |= IXGBE_MAC_STATE_MODIFIED; - adapter->mac_table[index].state &= ~IXGBE_MAC_STATE_IN_USE; - memset(adapter->mac_table[index].addr, 0, ETH_ALEN); - adapter->mac_table[index].queue = 0; - ixgbe_sync_mac_table(adapter); -} - -int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, u8* addr, u16 queue) -{ - /* search table for addr, if found, set to 0 and sync */ - int i; - struct ixgbe_hw *hw = &adapter->hw; - - if (is_zero_ether_addr(addr)) - return 0; - for (i = 0; i < hw->mac.num_rar_entries; i++) { - if (ether_addr_equal(addr, adapter->mac_table[i].addr) && - adapter->mac_table[i].queue == queue) { - adapter->mac_table[i].state |= IXGBE_MAC_STATE_MODIFIED; - adapter->mac_table[i].state &= ~IXGBE_MAC_STATE_IN_USE; - memset(adapter->mac_table[i].addr, 0, ETH_ALEN); - adapter->mac_table[i].queue = 0; - ixgbe_sync_mac_table(adapter); - return 0; - } - } - return -ENOMEM; -} -#ifdef HAVE_SET_RX_MODE -/** - * ixgbe_write_uc_addr_list - write unicast addresses to RAR table - * @netdev: network interface device structure - * - * Writes unicast address list to the RAR table. - * Returns: -ENOMEM on failure/insufficient address space - * 0 on no addresses written - * X on writing X addresses to the RAR table - **/ -int ixgbe_write_uc_addr_list(struct ixgbe_adapter *adapter, - struct net_device *netdev, unsigned int vfn) -{ - int count = 0; - - /* return ENOMEM indicating insufficient memory for addresses */ - if (netdev_uc_count(netdev) > ixgbe_available_rars(adapter)) - return -ENOMEM; - - if (!netdev_uc_empty(netdev)) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - struct netdev_hw_addr *ha; -#else - struct dev_mc_list *ha; -#endif - netdev_for_each_uc_addr(ha, netdev) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - ixgbe_del_mac_filter(adapter, ha->addr, (u16)vfn); - ixgbe_add_mac_filter(adapter, ha->addr, (u16)vfn); -#else - ixgbe_del_mac_filter(adapter, ha->da_addr, (u16)vfn); - ixgbe_add_mac_filter(adapter, ha->da_addr, (u16)vfn); -#endif - count++; - } - } - return count; -} - -#endif -/** - * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set - * @netdev: network interface device structure - * - * The set_rx_method entry point is called whenever the unicast/multicast - * address list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper unicast, multicast and - * promiscuous mode. - **/ -void ixgbe_set_rx_mode(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; - u32 vlnctrl; - int count; - - /* Check for Promiscuous and All Multicast modes */ - fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - - /* set all bits that we expect to always be set */ - fctrl |= IXGBE_FCTRL_BAM; - fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ - fctrl |= IXGBE_FCTRL_PMCF; - - /* clear the bits we are changing the status of */ - fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); - vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); - - if (netdev->flags & IFF_PROMISC) { - hw->addr_ctrl.user_set_promisc = true; - fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); - vmolr |= IXGBE_VMOLR_MPE; - } else { - if (netdev->flags & IFF_ALLMULTI) { - fctrl |= IXGBE_FCTRL_MPE; - vmolr |= IXGBE_VMOLR_MPE; - } else { - /* - * Write addresses to the MTA, if the attempt fails - * then we should just turn on promiscuous mode so - * that we can at least receive multicast traffic - */ - count = ixgbe_write_mc_addr_list(netdev); - if (count < 0) { - fctrl |= IXGBE_FCTRL_MPE; - vmolr |= IXGBE_VMOLR_MPE; - } else if (count) { - vmolr |= IXGBE_VMOLR_ROMPE; - } - } -#ifdef NETIF_F_HW_VLAN_TX - /* enable hardware vlan filtering */ - vlnctrl |= IXGBE_VLNCTRL_VFE; -#endif - hw->addr_ctrl.user_set_promisc = false; -#ifdef HAVE_SET_RX_MODE - /* - * Write addresses to available RAR registers, if there is not - * sufficient space to store all the addresses then enable - * unicast promiscuous mode - */ - count = ixgbe_write_uc_addr_list(adapter, netdev, - adapter->num_vfs); - if (count < 0) { - fctrl |= IXGBE_FCTRL_UPE; - vmolr |= IXGBE_VMOLR_ROPE; - } -#endif - } - - if (hw->mac.type != ixgbe_mac_82598EB) { - vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(adapter->num_vfs)) & - ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE | - IXGBE_VMOLR_ROPE); - IXGBE_WRITE_REG(hw, IXGBE_VMOLR(adapter->num_vfs), vmolr); - } - - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); -} - - - - - - - - -/* Additional bittime to account for IXGBE framing */ -#define IXGBE_ETH_FRAMING 20 - -/* - * ixgbe_hpbthresh - calculate high water mark for flow control - * - * @adapter: board private structure to calculate for - * @pb - packet buffer to calculate - */ -static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) -{ - struct ixgbe_hw *hw = &adapter->hw; - struct net_device *dev = adapter->netdev; - int link, tc, kb, marker; - u32 dv_id, rx_pba; - - /* Calculate max LAN frame size */ - tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING; - -#ifdef IXGBE_FCOE - /* FCoE traffic class uses FCOE jumbo frames */ - if (dev->features & NETIF_F_FCOE_MTU) { - int fcoe_pb = 0; - - fcoe_pb = netdev_get_prio_tc_map(dev, adapter->fcoe.up); - - if (fcoe_pb == pb && tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) - tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; - } -#endif - - /* Calculate delay value for device */ - switch (hw->mac.type) { - case ixgbe_mac_X540: - dv_id = IXGBE_DV_X540(link, tc); - break; - default: - dv_id = IXGBE_DV(link, tc); - break; - } - - /* Loopback switch introduces additional latency */ - if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) - dv_id += IXGBE_B2BT(tc); - - /* Delay value is calculated in bit times convert to KB */ - kb = IXGBE_BT2KB(dv_id); - rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10; - - marker = rx_pba - kb; - - /* It is possible that the packet buffer is not large enough - * to provide required headroom. In this case throw an error - * to user and a do the best we can. - */ - if (marker < 0) { - e_warn(drv, "Packet Buffer(%i) can not provide enough" - "headroom to suppport flow control." - "Decrease MTU or number of traffic classes\n", pb); - marker = tc + 1; - } - - return marker; -} - -/* - * ixgbe_lpbthresh - calculate low water mark for for flow control - * - * @adapter: board private structure to calculate for - * @pb - packet buffer to calculate - */ -static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter, int pb) -{ - struct ixgbe_hw *hw = &adapter->hw; - struct net_device *dev = adapter->netdev; - int tc; - u32 dv_id; - - /* Calculate max LAN frame size */ - tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN; - -#ifdef IXGBE_FCOE - /* FCoE traffic class uses FCOE jumbo frames */ - if (dev->features & NETIF_F_FCOE_MTU) { - int fcoe_pb = 0; - - fcoe_pb = netdev_get_prio_tc_map(dev, adapter->fcoe.up); - - if (fcoe_pb == pb && tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) - tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; - } -#endif - - /* Calculate delay value for device */ - switch (hw->mac.type) { - case ixgbe_mac_X540: - dv_id = IXGBE_LOW_DV_X540(tc); - break; - default: - dv_id = IXGBE_LOW_DV(tc); - break; - } - - /* Delay value is calculated in bit times convert to KB */ - return IXGBE_BT2KB(dv_id); -} - -/* - * ixgbe_pbthresh_setup - calculate and setup high low water marks - */ -static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - int num_tc = netdev_get_num_tc(adapter->netdev); - int i; - - if (!num_tc) - num_tc = 1; - if (num_tc > IXGBE_DCB_MAX_TRAFFIC_CLASS) - num_tc = IXGBE_DCB_MAX_TRAFFIC_CLASS; - - for (i = 0; i < num_tc; i++) { - hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i); - hw->fc.low_water[i] = ixgbe_lpbthresh(adapter, i); - - /* Low water marks must not be larger than high water marks */ - if (hw->fc.low_water[i] > hw->fc.high_water[i]) - hw->fc.low_water[i] = 0; - } - - for (; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) - hw->fc.high_water[i] = 0; -} - - - -#ifdef NO_VNIC -static void ixgbe_configure(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - - ixgbe_configure_pb(adapter); - ixgbe_configure_dcb(adapter); - - ixgbe_set_rx_mode(adapter->netdev); -#ifdef NETIF_F_HW_VLAN_TX - ixgbe_restore_vlan(adapter); -#endif - -#ifdef IXGBE_FCOE - if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) - ixgbe_configure_fcoe(adapter); - -#endif /* IXGBE_FCOE */ - - if (adapter->hw.mac.type != ixgbe_mac_82598EB) - hw->mac.ops.disable_sec_rx_path(hw); - - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { - ixgbe_init_fdir_signature_82599(&adapter->hw, - adapter->fdir_pballoc); - } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { - ixgbe_init_fdir_perfect_82599(&adapter->hw, - adapter->fdir_pballoc); - ixgbe_fdir_filter_restore(adapter); - } - - if (adapter->hw.mac.type != ixgbe_mac_82598EB) - hw->mac.ops.enable_sec_rx_path(hw); - - ixgbe_configure_virtualization(adapter); - - ixgbe_configure_tx(adapter); - ixgbe_configure_rx(adapter); -} -#endif - -static bool ixgbe_is_sfp(struct ixgbe_hw *hw) -{ - switch (hw->phy.type) { - case ixgbe_phy_sfp_avago: - case ixgbe_phy_sfp_ftl: - case ixgbe_phy_sfp_intel: - case ixgbe_phy_sfp_unknown: - case ixgbe_phy_sfp_passive_tyco: - case ixgbe_phy_sfp_passive_unknown: - case ixgbe_phy_sfp_active_unknown: - case ixgbe_phy_sfp_ftl_active: - return true; - case ixgbe_phy_nl: - if (hw->mac.type == ixgbe_mac_82598EB) - return true; - default: - return false; - } -} - - -/** - * ixgbe_clear_vf_stats_counters - Clear out VF stats after reset - * @adapter: board private structure - * - * On a reset we need to clear out the VF stats or accounting gets - * messed up because they're not clear on read. - **/ -void ixgbe_clear_vf_stats_counters(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - int i; - - for (i = 0; i < adapter->num_vfs; i++) { - adapter->vfinfo[i].last_vfstats.gprc = - IXGBE_READ_REG(hw, IXGBE_PVFGPRC(i)); - adapter->vfinfo[i].saved_rst_vfstats.gprc += - adapter->vfinfo[i].vfstats.gprc; - adapter->vfinfo[i].vfstats.gprc = 0; - adapter->vfinfo[i].last_vfstats.gptc = - IXGBE_READ_REG(hw, IXGBE_PVFGPTC(i)); - adapter->vfinfo[i].saved_rst_vfstats.gptc += - adapter->vfinfo[i].vfstats.gptc; - adapter->vfinfo[i].vfstats.gptc = 0; - adapter->vfinfo[i].last_vfstats.gorc = - IXGBE_READ_REG(hw, IXGBE_PVFGORC_LSB(i)); - adapter->vfinfo[i].saved_rst_vfstats.gorc += - adapter->vfinfo[i].vfstats.gorc; - adapter->vfinfo[i].vfstats.gorc = 0; - adapter->vfinfo[i].last_vfstats.gotc = - IXGBE_READ_REG(hw, IXGBE_PVFGOTC_LSB(i)); - adapter->vfinfo[i].saved_rst_vfstats.gotc += - adapter->vfinfo[i].vfstats.gotc; - adapter->vfinfo[i].vfstats.gotc = 0; - adapter->vfinfo[i].last_vfstats.mprc = - IXGBE_READ_REG(hw, IXGBE_PVFMPRC(i)); - adapter->vfinfo[i].saved_rst_vfstats.mprc += - adapter->vfinfo[i].vfstats.mprc; - adapter->vfinfo[i].vfstats.mprc = 0; - } -} - - - -void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) -{ -#ifdef NO_VNIC - WARN_ON(in_interrupt()); - /* put off any impending NetWatchDogTimeout */ - adapter->netdev->trans_start = jiffies; - - while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - ixgbe_down(adapter); - /* - * If SR-IOV enabled then wait a bit before bringing the adapter - * back up to give the VFs time to respond to the reset. The - * two second wait is based upon the watchdog timer cycle in - * the VF driver. - */ - if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) - msleep(2000); - ixgbe_up(adapter); - clear_bit(__IXGBE_RESETTING, &adapter->state); -#endif -} - -void ixgbe_up(struct ixgbe_adapter *adapter) -{ - /* hardware has been reset, we need to reload some things */ - //ixgbe_configure(adapter); - - //ixgbe_up_complete(adapter); -} - -void ixgbe_reset(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - int err; - - /* lock SFP init bit to prevent race conditions with the watchdog */ - while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) - usleep_range(1000, 2000); - - /* clear all SFP and link config related flags while holding SFP_INIT */ - adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | - IXGBE_FLAG2_SFP_NEEDS_RESET); - adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; - - err = hw->mac.ops.init_hw(hw); - switch (err) { - case 0: - case IXGBE_ERR_SFP_NOT_PRESENT: - case IXGBE_ERR_SFP_NOT_SUPPORTED: - break; - case IXGBE_ERR_MASTER_REQUESTS_PENDING: - e_dev_err("master disable timed out\n"); - break; - case IXGBE_ERR_EEPROM_VERSION: - /* We are running on a pre-production device, log a warning */ - e_dev_warn("This device is a pre-production adapter/LOM. " - "Please be aware there may be issues associated " - "with your hardware. If you are experiencing " - "problems please contact your Intel or hardware " - "representative who provided you with this " - "hardware.\n"); - break; - default: - e_dev_err("Hardware Error: %d\n", err); - } - - clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); - - ixgbe_flush_sw_mac_table(adapter); - memcpy(&adapter->mac_table[0].addr, hw->mac.perm_addr, - netdev->addr_len); - adapter->mac_table[0].queue = adapter->num_vfs; - adapter->mac_table[0].state = (IXGBE_MAC_STATE_DEFAULT | - IXGBE_MAC_STATE_IN_USE); - hw->mac.ops.set_rar(hw, 0, adapter->mac_table[0].addr, - adapter->mac_table[0].queue, - IXGBE_RAH_AV); -} - - - - - - -void ixgbe_down(struct ixgbe_adapter *adapter) -{ -#ifdef NO_VNIC - struct net_device *netdev = adapter->netdev; - struct ixgbe_hw *hw = &adapter->hw; - u32 rxctrl; - int i; - - /* signal that we are down to the interrupt handler */ - set_bit(__IXGBE_DOWN, &adapter->state); - - /* disable receives */ - rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); - - /* disable all enabled rx queues */ - for (i = 0; i < adapter->num_rx_queues; i++) - /* this call also flushes the previous write */ - ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]); - - usleep_range(10000, 20000); - - netif_tx_stop_all_queues(netdev); - - /* call carrier off first to avoid false dev_watchdog timeouts */ - netif_carrier_off(netdev); - netif_tx_disable(netdev); - - ixgbe_irq_disable(adapter); - - ixgbe_napi_disable_all(adapter); - - adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT | - IXGBE_FLAG2_RESET_REQUESTED); - adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; - - del_timer_sync(&adapter->service_timer); - - if (adapter->num_vfs) { - /* Clear EITR Select mapping */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0); - - /* Mark all the VFs as inactive */ - for (i = 0 ; i < adapter->num_vfs; i++) - adapter->vfinfo[i].clear_to_send = 0; - - /* ping all the active vfs to let them know we are going down */ - ixgbe_ping_all_vfs(adapter); - - /* Disable all VFTE/VFRE TX/RX */ - ixgbe_disable_tx_rx(adapter); - } - - /* disable transmits in the hardware now that interrupts are off */ - for (i = 0; i < adapter->num_tx_queues; i++) { - u8 reg_idx = adapter->tx_ring[i]->reg_idx; - IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); - } - - /* Disable the Tx DMA engine on 82599 and X540 */ - switch (hw->mac.type) { - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, - (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & - ~IXGBE_DMATXCTL_TE)); - break; - default: - break; - } - -#ifdef HAVE_PCI_ERS - if (!pci_channel_offline(adapter->pdev)) -#endif - ixgbe_reset(adapter); - /* power down the optics */ - if ((hw->phy.multispeed_fiber) || - ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && - (hw->mac.type == ixgbe_mac_82599EB))) - ixgbe_disable_tx_laser(hw); - - ixgbe_clean_all_tx_rings(adapter); - ixgbe_clean_all_rx_rings(adapter); - -#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) - /* since we reset the hardware DCA settings were cleared */ - ixgbe_setup_dca(adapter); -#endif - -#endif /* NO_VNIC */ -} - -#ifndef NO_VNIC - -#undef IXGBE_FCOE - -/* Artificial max queue cap per traffic class in DCB mode */ -#define DCB_QUEUE_CAP 8 - -/** - * ixgbe_set_dcb_queues: Allocate queues for a DCB-enabled device - * @adapter: board private structure to initialize - * - * When DCB (Data Center Bridging) is enabled, allocate queues for - * each traffic class. If multiqueue isn't available,then abort DCB - * initialization. - * - * This function handles all combinations of DCB, RSS, and FCoE. - * - **/ -static bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter) -{ - int tcs; -#ifdef HAVE_MQPRIO - int rss_i, i, offset = 0; - struct net_device *dev = adapter->netdev; - - /* Map queue offset and counts onto allocated tx queues */ - tcs = netdev_get_num_tc(dev); - - if (!tcs) - return false; - - rss_i = min_t(int, dev->num_tx_queues / tcs, num_online_cpus()); - - if (rss_i > DCB_QUEUE_CAP) - rss_i = DCB_QUEUE_CAP; - - for (i = 0; i < tcs; i++) { - netdev_set_tc_queue(dev, i, rss_i, offset); - offset += rss_i; - } - - adapter->num_tx_queues = rss_i * tcs; - adapter->num_rx_queues = rss_i * tcs; - -#ifdef IXGBE_FCOE - /* FCoE enabled queues require special configuration indexed - * by feature specific indices and mask. Here we map FCoE - * indices onto the DCB queue pairs allowing FCoE to own - * configuration later. - */ - - if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { - struct ixgbe_ring_feature *f; - int tc; - u8 prio_tc[IXGBE_DCB_MAX_USER_PRIORITY] = {0}; - - ixgbe_dcb_unpack_map_cee(&adapter->dcb_cfg, - IXGBE_DCB_TX_CONFIG, - prio_tc); - tc = prio_tc[adapter->fcoe.up]; - - f = &adapter->ring_feature[RING_F_FCOE]; - f->indices = min_t(int, rss_i, f->indices); - f->mask = rss_i * tc; - } -#endif /* IXGBE_FCOE */ -#else - if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) - return false; - - /* Enable one Queue per traffic class */ - tcs = adapter->tc; - if (!tcs) - return false; - -#ifdef IXGBE_FCOE - if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { - struct ixgbe_ring_feature *f; - int tc = netdev_get_prio_tc_map(adapter->netdev, - adapter->fcoe.up); - - f = &adapter->ring_feature[RING_F_FCOE]; - - /* - * We have max 8 queues for FCoE, where 8 the is - * FCoE redirection table size. We must also share - * ring resources with network traffic so if FCoE TC is - * 4 or greater and we are in 8 TC mode we can only use - * 7 queues. - */ - if ((tcs > 4) && (tc >= 4) && (f->indices > 7)) - f->indices = 7; - - f->indices = min_t(int, num_online_cpus(), f->indices); - f->mask = tcs; - - adapter->num_rx_queues = f->indices + tcs; - adapter->num_tx_queues = f->indices + tcs; - - return true; - } - -#endif /* IXGBE_FCOE */ - adapter->num_rx_queues = tcs; - adapter->num_tx_queues = tcs; -#endif /* HAVE_MQ */ - - return true; -} - -/** - * ixgbe_set_vmdq_queues: Allocate queues for VMDq devices - * @adapter: board private structure to initialize - * - * When VMDq (Virtual Machine Devices queue) is enabled, allocate queues - * and VM pools where appropriate. If RSS is available, then also try and - * enable RSS and map accordingly. - * - **/ -static bool ixgbe_set_vmdq_queues(struct ixgbe_adapter *adapter) -{ - int vmdq_i = adapter->ring_feature[RING_F_VMDQ].indices; - int vmdq_m = 0; - int rss_i = adapter->ring_feature[RING_F_RSS].indices; - unsigned long i; - int rss_shift; - bool ret = false; - - - switch (adapter->flags & (IXGBE_FLAG_RSS_ENABLED - | IXGBE_FLAG_DCB_ENABLED - | IXGBE_FLAG_VMDQ_ENABLED)) { - - case (IXGBE_FLAG_RSS_ENABLED | IXGBE_FLAG_VMDQ_ENABLED): - switch (adapter->hw.mac.type) { - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - vmdq_i = min((int)IXGBE_MAX_VMDQ_INDICES, vmdq_i); - if (vmdq_i > 32) - rss_i = 2; - else - rss_i = 4; - i = rss_i; - rss_shift = find_first_bit(&i, sizeof(i) * 8); - vmdq_m = ((IXGBE_MAX_VMDQ_INDICES - 1) << - rss_shift) & (MAX_RX_QUEUES - 1); - break; - default: - break; - } - adapter->num_rx_queues = vmdq_i * rss_i; - adapter->num_tx_queues = min((int)MAX_TX_QUEUES, vmdq_i * rss_i); - ret = true; - break; - - case (IXGBE_FLAG_VMDQ_ENABLED): - switch (adapter->hw.mac.type) { - case ixgbe_mac_82598EB: - vmdq_m = (IXGBE_MAX_VMDQ_INDICES - 1); - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - vmdq_m = (IXGBE_MAX_VMDQ_INDICES - 1) << 1; - break; - default: - break; - } - adapter->num_rx_queues = vmdq_i; - adapter->num_tx_queues = vmdq_i; - ret = true; - break; - - default: - ret = false; - goto vmdq_queues_out; - } - - if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) { - adapter->num_rx_pools = vmdq_i; - adapter->num_rx_queues_per_pool = adapter->num_rx_queues / - vmdq_i; - } else { - adapter->num_rx_pools = adapter->num_rx_queues; - adapter->num_rx_queues_per_pool = 1; - } - /* save the mask for later use */ - adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m; -vmdq_queues_out: - return ret; -} - -/** - * ixgbe_set_rss_queues: Allocate queues for RSS - * @adapter: board private structure to initialize - * - * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try - * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU. - * - **/ -static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) -{ - struct ixgbe_ring_feature *f; - - if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) { - adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; - return false; - } - - /* set mask for 16 queue limit of RSS */ - f = &adapter->ring_feature[RING_F_RSS]; - f->mask = 0xF; - - /* - * Use Flow Director in addition to RSS to ensure the best - * distribution of flows across cores, even when an FDIR flow - * isn't matched. - */ - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { - f = &adapter->ring_feature[RING_F_FDIR]; - - f->indices = min_t(int, num_online_cpus(), f->indices); - f->mask = 0; - } - - adapter->num_rx_queues = f->indices; -#ifdef HAVE_TX_MQ - adapter->num_tx_queues = f->indices; -#endif - - return true; -} - -#ifdef IXGBE_FCOE -/** - * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE) - * @adapter: board private structure to initialize - * - * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges. - * The ring feature mask is not used as a mask for FCoE, as it can take any 8 - * rx queues out of the max number of rx queues, instead, it is used as the - * index of the first rx queue used by FCoE. - * - **/ -static bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter) -{ - struct ixgbe_ring_feature *f; - - if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) - return false; - - ixgbe_set_rss_queues(adapter); - - f = &adapter->ring_feature[RING_F_FCOE]; - f->indices = min_t(int, num_online_cpus(), f->indices); - - /* adding FCoE queues */ - f->mask = adapter->num_rx_queues; - adapter->num_rx_queues += f->indices; - adapter->num_tx_queues += f->indices; - - return true; -} - -#endif /* IXGBE_FCOE */ -/* - * ixgbe_set_num_queues: Allocate queues for device, feature dependent - * @adapter: board private structure to initialize - * - * This is the top level queue allocation routine. The order here is very - * important, starting with the "most" number of features turned on at once, - * and ending with the smallest set of features. This way large combinations - * can be allocated if they're turned on, and smaller combinations are the - * fallthrough conditions. - * - **/ -static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) -{ - /* Start with base case */ - adapter->num_rx_queues = 1; - adapter->num_tx_queues = 1; - adapter->num_rx_pools = adapter->num_rx_queues; - adapter->num_rx_queues_per_pool = 1; - - if (ixgbe_set_vmdq_queues(adapter)) - return; - - if (ixgbe_set_dcb_queues(adapter)) - return; - -#ifdef IXGBE_FCOE - if (ixgbe_set_fcoe_queues(adapter)) - return; - -#endif /* IXGBE_FCOE */ - ixgbe_set_rss_queues(adapter); -} - -#endif - - -/** - * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) - * @adapter: board private structure to initialize - * - * ixgbe_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - **/ -static int ixgbe_sw_init(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - struct pci_dev *pdev = adapter->pdev; - int err; - - /* PCI config space info */ - - hw->vendor_id = pdev->vendor; - hw->device_id = pdev->device; - pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); - hw->subsystem_vendor_id = pdev->subsystem_vendor; - hw->subsystem_device_id = pdev->subsystem_device; - - err = ixgbe_init_shared_code(hw); - if (err) { - e_err(probe, "init_shared_code failed: %d\n", err); - goto out; - } - adapter->mac_table = kzalloc(sizeof(struct ixgbe_mac_addr) * - hw->mac.num_rar_entries, - GFP_ATOMIC); - /* Set capability flags */ - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - adapter->flags |= IXGBE_FLAG_MSI_CAPABLE | - IXGBE_FLAG_MSIX_CAPABLE | - IXGBE_FLAG_MQ_CAPABLE | - IXGBE_FLAG_RSS_CAPABLE; - adapter->flags |= IXGBE_FLAG_DCB_CAPABLE; -#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) - adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; -#endif - adapter->flags &= ~IXGBE_FLAG_SRIOV_CAPABLE; - adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE; - - if (hw->device_id == IXGBE_DEV_ID_82598AT) - adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; - - adapter->max_msix_q_vectors = IXGBE_MAX_MSIX_Q_VECTORS_82598; - break; - case ixgbe_mac_X540: - adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; - case ixgbe_mac_82599EB: - adapter->flags |= IXGBE_FLAG_MSI_CAPABLE | - IXGBE_FLAG_MSIX_CAPABLE | - IXGBE_FLAG_MQ_CAPABLE | - IXGBE_FLAG_RSS_CAPABLE; - adapter->flags |= IXGBE_FLAG_DCB_CAPABLE; -#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) - adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; -#endif - adapter->flags |= IXGBE_FLAG_SRIOV_CAPABLE; - adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; -#ifdef IXGBE_FCOE - adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; - adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; - adapter->ring_feature[RING_F_FCOE].indices = 0; -#ifdef CONFIG_DCB - /* Default traffic class to use for FCoE */ - adapter->fcoe.tc = IXGBE_FCOE_DEFTC; - adapter->fcoe.up = IXGBE_FCOE_DEFTC; - adapter->fcoe.up_set = IXGBE_FCOE_DEFTC; -#endif -#endif - if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) - adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; -#ifndef IXGBE_NO_SMART_SPEED - hw->phy.smart_speed = ixgbe_smart_speed_on; -#else - hw->phy.smart_speed = ixgbe_smart_speed_off; -#endif - adapter->max_msix_q_vectors = IXGBE_MAX_MSIX_Q_VECTORS_82599; - default: - break; - } - - /* n-tuple support exists, always init our spinlock */ - //spin_lock_init(&adapter->fdir_perfect_lock); - - if (adapter->flags & IXGBE_FLAG_DCB_CAPABLE) { - int j; - struct ixgbe_dcb_tc_config *tc; - int dcb_i = IXGBE_DCB_MAX_TRAFFIC_CLASS; - - - adapter->dcb_cfg.num_tcs.pg_tcs = dcb_i; - adapter->dcb_cfg.num_tcs.pfc_tcs = dcb_i; - for (j = 0; j < dcb_i; j++) { - tc = &adapter->dcb_cfg.tc_config[j]; - tc->path[IXGBE_DCB_TX_CONFIG].bwg_id = 0; - tc->path[IXGBE_DCB_TX_CONFIG].bwg_percent = 100 / dcb_i; - tc->path[IXGBE_DCB_RX_CONFIG].bwg_id = 0; - tc->path[IXGBE_DCB_RX_CONFIG].bwg_percent = 100 / dcb_i; - tc->pfc = ixgbe_dcb_pfc_disabled; - if (j == 0) { - /* total of all TCs bandwidth needs to be 100 */ - tc->path[IXGBE_DCB_TX_CONFIG].bwg_percent += - 100 % dcb_i; - tc->path[IXGBE_DCB_RX_CONFIG].bwg_percent += - 100 % dcb_i; - } - } - - /* Initialize default user to priority mapping, UPx->TC0 */ - tc = &adapter->dcb_cfg.tc_config[0]; - tc->path[IXGBE_DCB_TX_CONFIG].up_to_tc_bitmap = 0xFF; - tc->path[IXGBE_DCB_RX_CONFIG].up_to_tc_bitmap = 0xFF; - - adapter->dcb_cfg.bw_percentage[IXGBE_DCB_TX_CONFIG][0] = 100; - adapter->dcb_cfg.bw_percentage[IXGBE_DCB_RX_CONFIG][0] = 100; - adapter->dcb_cfg.rx_pba_cfg = ixgbe_dcb_pba_equal; - adapter->dcb_cfg.pfc_mode_enable = false; - adapter->dcb_cfg.round_robin_enable = false; - adapter->dcb_set_bitmap = 0x00; -#ifdef CONFIG_DCB - adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; -#endif /* CONFIG_DCB */ - - if (hw->mac.type == ixgbe_mac_X540) { - adapter->dcb_cfg.num_tcs.pg_tcs = 4; - adapter->dcb_cfg.num_tcs.pfc_tcs = 4; - } - } -#ifdef CONFIG_DCB - /* XXX does this need to be initialized even w/o DCB? */ - //memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, - // sizeof(adapter->temp_dcb_cfg)); - -#endif - //if (hw->mac.type == ixgbe_mac_82599EB || - // hw->mac.type == ixgbe_mac_X540) - // hw->mbx.ops.init_params(hw); - - /* default flow control settings */ - hw->fc.requested_mode = ixgbe_fc_full; - hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */ - - adapter->last_lfc_mode = hw->fc.current_mode; - ixgbe_pbthresh_setup(adapter); - hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; - hw->fc.send_xon = true; - hw->fc.disable_fc_autoneg = false; - - /* set default ring sizes */ - adapter->tx_ring_count = IXGBE_DEFAULT_TXD; - adapter->rx_ring_count = IXGBE_DEFAULT_RXD; - - /* set default work limits */ - adapter->tx_work_limit = IXGBE_DEFAULT_TX_WORK; - adapter->rx_work_limit = IXGBE_DEFAULT_RX_WORK; - - set_bit(__IXGBE_DOWN, &adapter->state); -out: - return err; -} - -/** - * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) - * @tx_ring: tx descriptor ring (for a specific queue) to setup - * - * Return 0 on success, negative on failure - **/ -int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring) -{ - struct device *dev = tx_ring->dev; - //int orig_node = dev_to_node(dev); - int numa_node = -1; - int size; - - size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; - - if (tx_ring->q_vector) - numa_node = tx_ring->q_vector->numa_node; - - tx_ring->tx_buffer_info = vzalloc_node(size, numa_node); - if (!tx_ring->tx_buffer_info) - tx_ring->tx_buffer_info = vzalloc(size); - if (!tx_ring->tx_buffer_info) - goto err; - - /* round up to nearest 4K */ - tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc); - tx_ring->size = ALIGN(tx_ring->size, 4096); - - //set_dev_node(dev, numa_node); - //tx_ring->desc = dma_alloc_coherent(dev, - // tx_ring->size, - // &tx_ring->dma, - // GFP_KERNEL); - //set_dev_node(dev, orig_node); - //if (!tx_ring->desc) - // tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, - // &tx_ring->dma, GFP_KERNEL); - //if (!tx_ring->desc) - // goto err; - - return 0; - -err: - vfree(tx_ring->tx_buffer_info); - tx_ring->tx_buffer_info = NULL; - dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n"); - return -ENOMEM; -} - -/** - * ixgbe_setup_all_tx_resources - allocate all queues Tx resources - * @adapter: board private structure - * - * If this function returns with an error, then it's possible one or - * more of the rings is populated (while the rest are not). It is the - * callers duty to clean those orphaned rings. - * - * Return 0 on success, negative on failure - **/ -static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) -{ - int i, err = 0; - - for (i = 0; i < adapter->num_tx_queues; i++) { - err = ixgbe_setup_tx_resources(adapter->tx_ring[i]); - if (!err) - continue; - e_err(probe, "Allocation for Tx Queue %u failed\n", i); - break; - } - - return err; -} - -/** - * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) - * @rx_ring: rx descriptor ring (for a specific queue) to setup - * - * Returns 0 on success, negative on failure - **/ -int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring) -{ - struct device *dev = rx_ring->dev; - //int orig_node = dev_to_node(dev); - int numa_node = -1; - int size; - - size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; - - if (rx_ring->q_vector) - numa_node = rx_ring->q_vector->numa_node; - - rx_ring->rx_buffer_info = vzalloc_node(size, numa_node); - if (!rx_ring->rx_buffer_info) - rx_ring->rx_buffer_info = vzalloc(size); - if (!rx_ring->rx_buffer_info) - goto err; - - /* Round up to nearest 4K */ - rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc); - rx_ring->size = ALIGN(rx_ring->size, 4096); - -#ifdef NO_VNIC - set_dev_node(dev, numa_node); - rx_ring->desc = dma_alloc_coherent(dev, - rx_ring->size, - &rx_ring->dma, - GFP_KERNEL); - set_dev_node(dev, orig_node); - if (!rx_ring->desc) - rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, - &rx_ring->dma, GFP_KERNEL); - if (!rx_ring->desc) - goto err; - -#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT - ixgbe_init_rx_page_offset(rx_ring); - -#endif - -#endif /* NO_VNIC */ - return 0; -err: - vfree(rx_ring->rx_buffer_info); - rx_ring->rx_buffer_info = NULL; - dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n"); - return -ENOMEM; -} - -/** - * ixgbe_setup_all_rx_resources - allocate all queues Rx resources - * @adapter: board private structure - * - * If this function returns with an error, then it's possible one or - * more of the rings is populated (while the rest are not). It is the - * callers duty to clean those orphaned rings. - * - * Return 0 on success, negative on failure - **/ -static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) -{ - int i, err = 0; - - for (i = 0; i < adapter->num_rx_queues; i++) { - err = ixgbe_setup_rx_resources(adapter->rx_ring[i]); - if (!err) - continue; - e_err(probe, "Allocation for Rx Queue %u failed\n", i); - break; - } - - return err; -} - -/** - * ixgbe_free_tx_resources - Free Tx Resources per Queue - * @tx_ring: Tx descriptor ring for a specific queue - * - * Free all transmit software resources - **/ -void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring) -{ - //ixgbe_clean_tx_ring(tx_ring); - - vfree(tx_ring->tx_buffer_info); - tx_ring->tx_buffer_info = NULL; - - /* if not set, then don't free */ - if (!tx_ring->desc) - return; - - //dma_free_coherent(tx_ring->dev, tx_ring->size, - // tx_ring->desc, tx_ring->dma); - - tx_ring->desc = NULL; -} - -/** - * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues - * @adapter: board private structure - * - * Free all transmit software resources - **/ -static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_tx_queues; i++) - if (adapter->tx_ring[i]->desc) - ixgbe_free_tx_resources(adapter->tx_ring[i]); -} - -/** - * ixgbe_free_rx_resources - Free Rx Resources - * @rx_ring: ring to clean the resources from - * - * Free all receive software resources - **/ -void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring) -{ - //ixgbe_clean_rx_ring(rx_ring); - - vfree(rx_ring->rx_buffer_info); - rx_ring->rx_buffer_info = NULL; - - /* if not set, then don't free */ - if (!rx_ring->desc) - return; - - //dma_free_coherent(rx_ring->dev, rx_ring->size, - // rx_ring->desc, rx_ring->dma); - - rx_ring->desc = NULL; -} - -/** - * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues - * @adapter: board private structure - * - * Free all receive software resources - **/ -static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_rx_queues; i++) - if (adapter->rx_ring[i]->desc) - ixgbe_free_rx_resources(adapter->rx_ring[i]); -} - - -/** - * ixgbe_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - **/ -//static -int ixgbe_open(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - int err; - - /* disallow open during test */ - if (test_bit(__IXGBE_TESTING, &adapter->state)) - return -EBUSY; - - netif_carrier_off(netdev); - - /* allocate transmit descriptors */ - err = ixgbe_setup_all_tx_resources(adapter); - if (err) - goto err_setup_tx; - - /* allocate receive descriptors */ - err = ixgbe_setup_all_rx_resources(adapter); - if (err) - goto err_setup_rx; - -#ifdef NO_VNIC - ixgbe_configure(adapter); - - err = ixgbe_request_irq(adapter); - if (err) - goto err_req_irq; - - ixgbe_up_complete(adapter); - -err_req_irq: -#else - return 0; -#endif -err_setup_rx: - ixgbe_free_all_rx_resources(adapter); -err_setup_tx: - ixgbe_free_all_tx_resources(adapter); - ixgbe_reset(adapter); - - return err; -} - -/** - * ixgbe_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the drivers control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - **/ -//static -int ixgbe_close(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - //ixgbe_down(adapter); - //ixgbe_free_irq(adapter); - - //ixgbe_fdir_filter_exit(adapter); - - //ixgbe_free_all_tx_resources(adapter); - //ixgbe_free_all_rx_resources(adapter); - - ixgbe_release_hw_control(adapter); - - return 0; -} - - - - - -/** - * ixgbe_get_stats - Get System Network Statistics - * @netdev: network interface device structure - * - * Returns the address of the device statistics structure. - * The statistics are actually updated from the timer callback. - **/ -//static -struct net_device_stats *ixgbe_get_stats(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - /* update the stats data */ - ixgbe_update_stats(adapter); - -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - /* only return the current stats */ - return &netdev->stats; -#else - /* only return the current stats */ - return &adapter->net_stats; -#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ -} - -/** - * ixgbe_update_stats - Update the board statistics counters. - * @adapter: board private structure - **/ -void ixgbe_update_stats(struct ixgbe_adapter *adapter) -{ -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - struct net_device_stats *net_stats = &adapter->netdev->stats; -#else - struct net_device_stats *net_stats = &adapter->net_stats; -#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ - struct ixgbe_hw *hw = &adapter->hw; - struct ixgbe_hw_stats *hwstats = &adapter->stats; - u64 total_mpc = 0; - u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; - u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0; - u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0; - u64 bytes = 0, packets = 0, hw_csum_rx_error = 0; -#ifndef IXGBE_NO_LRO - u32 flushed = 0, coal = 0; - int num_q_vectors = 1; -#endif -#ifdef IXGBE_FCOE - struct ixgbe_fcoe *fcoe = &adapter->fcoe; - unsigned int cpu; - u64 fcoe_noddp_counts_sum = 0, fcoe_noddp_ext_buff_counts_sum = 0; -#endif /* IXGBE_FCOE */ - - printk(KERN_DEBUG "ixgbe_update_stats, tx_queues=%d, rx_queues=%d\n", - adapter->num_tx_queues, adapter->num_rx_queues); - - if (test_bit(__IXGBE_DOWN, &adapter->state) || - test_bit(__IXGBE_RESETTING, &adapter->state)) - return; - -#ifndef IXGBE_NO_LRO - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) - num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; - -#endif - if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { - u64 rsc_count = 0; - u64 rsc_flush = 0; - for (i = 0; i < adapter->num_rx_queues; i++) { - rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count; - rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush; - } - adapter->rsc_total_count = rsc_count; - adapter->rsc_total_flush = rsc_flush; - } - -#ifndef IXGBE_NO_LRO - for (i = 0; i < num_q_vectors; i++) { - struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; - if (!q_vector) - continue; - flushed += q_vector->lrolist.stats.flushed; - coal += q_vector->lrolist.stats.coal; - } - adapter->lro_stats.flushed = flushed; - adapter->lro_stats.coal = coal; - -#endif - for (i = 0; i < adapter->num_rx_queues; i++) { - struct ixgbe_ring *rx_ring = adapter->rx_ring[i]; - non_eop_descs += rx_ring->rx_stats.non_eop_descs; - alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed; - alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed; - hw_csum_rx_error += rx_ring->rx_stats.csum_err; - bytes += rx_ring->stats.bytes; - packets += rx_ring->stats.packets; - - } - adapter->non_eop_descs = non_eop_descs; - adapter->alloc_rx_page_failed = alloc_rx_page_failed; - adapter->alloc_rx_buff_failed = alloc_rx_buff_failed; - adapter->hw_csum_rx_error = hw_csum_rx_error; - net_stats->rx_bytes = bytes; - net_stats->rx_packets = packets; - - bytes = 0; - packets = 0; - /* gather some stats to the adapter struct that are per queue */ - for (i = 0; i < adapter->num_tx_queues; i++) { - struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; - restart_queue += tx_ring->tx_stats.restart_queue; - tx_busy += tx_ring->tx_stats.tx_busy; - bytes += tx_ring->stats.bytes; - packets += tx_ring->stats.packets; - } - adapter->restart_queue = restart_queue; - adapter->tx_busy = tx_busy; - net_stats->tx_bytes = bytes; - net_stats->tx_packets = packets; - - hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); - - /* 8 register reads */ - for (i = 0; i < 8; i++) { - /* for packet buffers not used, the register should read 0 */ - mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i)); - missed_rx += mpc; - hwstats->mpc[i] += mpc; - total_mpc += hwstats->mpc[i]; - hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); - hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); - hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i)); - hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i)); - hwstats->pxonrxc[i] += - IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - hwstats->pxonrxc[i] += - IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); - break; - default: - break; - } - } - - /*16 register reads */ - for (i = 0; i < 16; i++) { - hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i)); - hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i)); - if ((hw->mac.type == ixgbe_mac_82599EB) || - (hw->mac.type == ixgbe_mac_X540)) { - hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); - IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */ - hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); - IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */ - } - } - - hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); - /* work around hardware counting issue */ - hwstats->gprc -= missed_rx; - - ixgbe_update_xoff_received(adapter); - - /* 82598 hardware only has a 32 bit counter in the high register */ - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); - hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); - hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); - hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH); - break; - case ixgbe_mac_X540: - /* OS2BMC stats are X540 only*/ - hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC); - hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC); - hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC); - hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC); - case ixgbe_mac_82599EB: - for (i = 0; i < 16; i++) - adapter->hw_rx_no_dma_resources += - IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); - hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); - IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ - hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); - IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ - hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL); - IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ - hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); -#ifdef HAVE_TX_MQ - hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); - hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS); -#endif /* HAVE_TX_MQ */ -#ifdef IXGBE_FCOE - hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC); - hwstats->fclast += IXGBE_READ_REG(hw, IXGBE_FCLAST); - hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC); - hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC); - hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC); - hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC); - hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC); - /* Add up per cpu counters for total ddp aloc fail */ - if (fcoe && fcoe->pcpu_noddp && fcoe->pcpu_noddp_ext_buff) { - for_each_possible_cpu(cpu) { - fcoe_noddp_counts_sum += - *per_cpu_ptr(fcoe->pcpu_noddp, cpu); - fcoe_noddp_ext_buff_counts_sum += - *per_cpu_ptr(fcoe-> - pcpu_noddp_ext_buff, cpu); - } - } - hwstats->fcoe_noddp = fcoe_noddp_counts_sum; - hwstats->fcoe_noddp_ext_buff = fcoe_noddp_ext_buff_counts_sum; - -#endif /* IXGBE_FCOE */ - break; - default: - break; - } - bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); - hwstats->bprc += bprc; - hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); - if (hw->mac.type == ixgbe_mac_82598EB) - hwstats->mprc -= bprc; - hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC); - hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); - hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); - hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); - hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); - hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); - hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); - hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); - lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); - hwstats->lxontxc += lxon; - lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); - hwstats->lxofftxc += lxoff; - hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); - hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); - /* - * 82598 errata - tx of flow control packets is included in tx counters - */ - xon_off_tot = lxon + lxoff; - hwstats->gptc -= xon_off_tot; - hwstats->mptc -= xon_off_tot; - hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN)); - hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC); - hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC); - hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC); - hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR); - hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); - hwstats->ptc64 -= xon_off_tot; - hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); - hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); - hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); - hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); - hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); - hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); - /* Fill out the OS statistics structure */ - net_stats->multicast = hwstats->mprc; - - /* Rx Errors */ - net_stats->rx_errors = hwstats->crcerrs + - hwstats->rlec; - net_stats->rx_dropped = 0; - net_stats->rx_length_errors = hwstats->rlec; - net_stats->rx_crc_errors = hwstats->crcerrs; - net_stats->rx_missed_errors = total_mpc; - - /* - * VF Stats Collection - skip while resetting because these - * are not clear on read and otherwise you'll sometimes get - * crazy values. - */ - if (!test_bit(__IXGBE_RESETTING, &adapter->state)) { - for (i = 0; i < adapter->num_vfs; i++) { - UPDATE_VF_COUNTER_32bit(IXGBE_PVFGPRC(i), \ - adapter->vfinfo[i].last_vfstats.gprc, \ - adapter->vfinfo[i].vfstats.gprc); - UPDATE_VF_COUNTER_32bit(IXGBE_PVFGPTC(i), \ - adapter->vfinfo[i].last_vfstats.gptc, \ - adapter->vfinfo[i].vfstats.gptc); - UPDATE_VF_COUNTER_36bit(IXGBE_PVFGORC_LSB(i), \ - IXGBE_PVFGORC_MSB(i), \ - adapter->vfinfo[i].last_vfstats.gorc, \ - adapter->vfinfo[i].vfstats.gorc); - UPDATE_VF_COUNTER_36bit(IXGBE_PVFGOTC_LSB(i), \ - IXGBE_PVFGOTC_MSB(i), \ - adapter->vfinfo[i].last_vfstats.gotc, \ - adapter->vfinfo[i].vfstats.gotc); - UPDATE_VF_COUNTER_32bit(IXGBE_PVFMPRC(i), \ - adapter->vfinfo[i].last_vfstats.mprc, \ - adapter->vfinfo[i].vfstats.mprc); - } - } -} - - -#ifdef NO_VNIC - -/** - * ixgbe_watchdog_update_link - update the link status - * @adapter - pointer to the device adapter structure - * @link_speed - pointer to a u32 to store the link_speed - **/ -static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 link_speed = adapter->link_speed; - bool link_up = adapter->link_up; - bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; - - if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) - return; - - if (hw->mac.ops.check_link) { - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - } else { - /* always assume link is up, if no check link function */ - link_speed = IXGBE_LINK_SPEED_10GB_FULL; - link_up = true; - } - -#ifdef HAVE_DCBNL_IEEE - if (adapter->ixgbe_ieee_pfc) - pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); - -#endif - if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en)) { - hw->mac.ops.fc_enable(hw); - //ixgbe_set_rx_drop_en(adapter); - } - - if (link_up || - time_after(jiffies, (adapter->link_check_timeout + - IXGBE_TRY_LINK_TIMEOUT))) { - adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; - IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); - IXGBE_WRITE_FLUSH(hw); - } - - adapter->link_up = link_up; - adapter->link_speed = link_speed; -} -#endif - - - -#ifdef NO_VNIC - -/** - * ixgbe_service_task - manages and runs subtasks - * @work: pointer to work_struct containing our data - **/ -static void ixgbe_service_task(struct work_struct *work) -{ - //struct ixgbe_adapter *adapter = container_of(work, - // struct ixgbe_adapter, - // service_task); - - //ixgbe_reset_subtask(adapter); - //ixgbe_sfp_detection_subtask(adapter); - //ixgbe_sfp_link_config_subtask(adapter); - //ixgbe_check_overtemp_subtask(adapter); - //ixgbe_watchdog_subtask(adapter); -#ifdef HAVE_TX_MQ - //ixgbe_fdir_reinit_subtask(adapter); -#endif - //ixgbe_check_hang_subtask(adapter); - - //ixgbe_service_event_complete(adapter); -} - - - - -#define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ - IXGBE_TXD_CMD_RS) - - -/** - * ixgbe_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure - * - * Returns 0 on success, negative on failure - **/ -static int ixgbe_set_mac(struct net_device *netdev, void *p) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - struct sockaddr *addr = p; - int ret; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - ixgbe_del_mac_filter(adapter, hw->mac.addr, - adapter->num_vfs); - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); - - - /* set the correct pool for the new PF MAC address in entry 0 */ - ret = ixgbe_add_mac_filter(adapter, hw->mac.addr, - adapter->num_vfs); - return ret > 0 ? 0 : ret; -} - - -/** - * ixgbe_ioctl - - * @netdev: - * @ifreq: - * @cmd: - **/ -static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - switch (cmd) { -#ifdef ETHTOOL_OPS_COMPAT - case SIOCETHTOOL: - return ethtool_ioctl(ifr); -#endif - default: - return -EOPNOTSUPP; - } -} -#endif /* NO_VNIC */ - - -void ixgbe_do_reset(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - if (netif_running(netdev)) - ixgbe_reinit_locked(adapter); - else - ixgbe_reset(adapter); -} - - - - - - -/** - * ixgbe_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in ixgbe_pci_tbl - * - * Returns 0 on success, negative on failure - * - * ixgbe_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - **/ -//static -int ixgbe_kni_probe(struct pci_dev *pdev, - struct net_device **lad_dev) -{ - size_t count; - struct net_device *netdev; - struct ixgbe_adapter *adapter = NULL; - struct ixgbe_hw *hw = NULL; - static int cards_found; - int i, err; - u16 offset; - u16 eeprom_verh, eeprom_verl, eeprom_cfg_blkh, eeprom_cfg_blkl; - u32 etrack_id; - u16 build, major, patch; - char *info_string, *i_s_var; - u8 part_str[IXGBE_PBANUM_LENGTH]; - enum ixgbe_mac_type mac_type = ixgbe_mac_unknown; -#ifdef HAVE_TX_MQ - unsigned int indices = num_possible_cpus(); -#endif /* HAVE_TX_MQ */ -#ifdef IXGBE_FCOE - u16 device_caps; -#endif - u16 wol_cap; - - err = pci_enable_device_mem(pdev); - if (err) - return err; - - -#ifdef NO_VNIC - err = pci_request_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM), ixgbe_driver_name); - if (err) { - dev_err(pci_dev_to_dev(pdev), - "pci_request_selected_regions failed 0x%x\n", err); - goto err_pci_reg; - } -#endif - - /* - * The mac_type is needed before we have the adapter is set up - * so rather than maintain two devID -> MAC tables we dummy up - * an ixgbe_hw stuct and use ixgbe_set_mac_type. - */ - hw = vmalloc(sizeof(struct ixgbe_hw)); - if (!hw) { - pr_info("Unable to allocate memory for early mac " - "check\n"); - } else { - hw->vendor_id = pdev->vendor; - hw->device_id = pdev->device; - ixgbe_set_mac_type(hw); - mac_type = hw->mac.type; - vfree(hw); - } - -#ifdef NO_VNIC - /* - * Workaround of Silicon errata on 82598. Disable LOs in the PCI switch - * port to which the 82598 is connected to prevent duplicate - * completions caused by LOs. We need the mac type so that we only - * do this on 82598 devices, ixgbe_set_mac_type does this for us if - * we set it's device ID. - */ - if (mac_type == ixgbe_mac_82598EB) - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); - - pci_enable_pcie_error_reporting(pdev); - - pci_set_master(pdev); -#endif - -#ifdef HAVE_TX_MQ -#ifdef CONFIG_DCB -#ifdef HAVE_MQPRIO - indices *= IXGBE_DCB_MAX_TRAFFIC_CLASS; -#else - indices = max_t(unsigned int, indices, IXGBE_MAX_DCB_INDICES); -#endif /* HAVE_MQPRIO */ -#endif /* CONFIG_DCB */ - - if (mac_type == ixgbe_mac_82598EB) - indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES); - else - indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES); - -#ifdef IXGBE_FCOE - indices += min_t(unsigned int, num_possible_cpus(), - IXGBE_MAX_FCOE_INDICES); -#endif - netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); -#else /* HAVE_TX_MQ */ - netdev = alloc_etherdev(sizeof(struct ixgbe_adapter)); -#endif /* HAVE_TX_MQ */ - if (!netdev) { - err = -ENOMEM; - goto err_alloc_etherdev; - } - - SET_NETDEV_DEV(netdev, &pdev->dev); - - adapter = netdev_priv(netdev); - //pci_set_drvdata(pdev, adapter); - - adapter->netdev = netdev; - adapter->pdev = pdev; - hw = &adapter->hw; - hw->back = adapter; - adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; - -#ifdef HAVE_PCI_ERS - /* - * call save state here in standalone driver because it relies on - * adapter struct to exist, and needs to call netdev_priv - */ - pci_save_state(pdev); - -#endif - hw->hw_addr = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (!hw->hw_addr) { - err = -EIO; - goto err_ioremap; - } - //ixgbe_assign_netdev_ops(netdev); - ixgbe_set_ethtool_ops(netdev); - - strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); - - adapter->bd_number = cards_found; - - /* setup the private structure */ - err = ixgbe_sw_init(adapter); - if (err) - goto err_sw_init; - - /* Make it possible the adapter to be woken up via WOL */ - switch (adapter->hw.mac.type) { - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); - break; - default: - break; - } - - /* - * check_options must be called before setup_link to set up - * hw->fc completely - */ - //ixgbe_check_options(adapter); - -#ifndef NO_VNIC - /* reset_hw fills in the perm_addr as well */ - hw->phy.reset_if_overtemp = true; - err = hw->mac.ops.reset_hw(hw); - hw->phy.reset_if_overtemp = false; - if (err == IXGBE_ERR_SFP_NOT_PRESENT && - hw->mac.type == ixgbe_mac_82598EB) { - err = 0; - } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - e_dev_err("failed to load because an unsupported SFP+ " - "module type was detected.\n"); - e_dev_err("Reload the driver after installing a supported " - "module.\n"); - goto err_sw_init; - } else if (err) { - e_dev_err("HW Init failed: %d\n", err); - goto err_sw_init; - } -#endif - - //if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) - // ixgbe_probe_vf(adapter); - - -#ifdef MAX_SKB_FRAGS - netdev->features |= NETIF_F_SG | - NETIF_F_IP_CSUM; - -#ifdef NETIF_F_IPV6_CSUM - netdev->features |= NETIF_F_IPV6_CSUM; -#endif - -#ifdef NETIF_F_HW_VLAN_TX - netdev->features |= NETIF_F_HW_VLAN_TX | - NETIF_F_HW_VLAN_RX; -#endif -#ifdef NETIF_F_TSO - netdev->features |= NETIF_F_TSO; -#endif /* NETIF_F_TSO */ -#ifdef NETIF_F_TSO6 - netdev->features |= NETIF_F_TSO6; -#endif /* NETIF_F_TSO6 */ -#ifdef NETIF_F_RXHASH - netdev->features |= NETIF_F_RXHASH; -#endif /* NETIF_F_RXHASH */ - -#ifdef HAVE_NDO_SET_FEATURES - netdev->features |= NETIF_F_RXCSUM; - - /* copy netdev features into list of user selectable features */ - netdev->hw_features |= netdev->features; - - /* give us the option of enabling RSC/LRO later */ -#ifdef IXGBE_NO_LRO - if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) -#endif - netdev->hw_features |= NETIF_F_LRO; - -#else -#ifdef NETIF_F_GRO - - /* this is only needed on kernels prior to 2.6.39 */ - netdev->features |= NETIF_F_GRO; -#endif /* NETIF_F_GRO */ -#endif - -#ifdef NETIF_F_HW_VLAN_TX - /* set this bit last since it cannot be part of hw_features */ - netdev->features |= NETIF_F_HW_VLAN_FILTER; -#endif - switch (adapter->hw.mac.type) { - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - netdev->features |= NETIF_F_SCTP_CSUM; -#ifdef HAVE_NDO_SET_FEATURES - netdev->hw_features |= NETIF_F_SCTP_CSUM | - NETIF_F_NTUPLE; -#endif - break; - default: - break; - } - -#ifdef HAVE_NETDEV_VLAN_FEATURES - netdev->vlan_features |= NETIF_F_SG | - NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | - NETIF_F_TSO | - NETIF_F_TSO6; - -#endif /* HAVE_NETDEV_VLAN_FEATURES */ - /* - * If perfect filters were enabled in check_options(), enable them - * on the netdevice too. - */ - if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) - netdev->features |= NETIF_F_NTUPLE; - if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) - adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) - adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; - if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) { - adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; - /* clear n-tuple support in the netdev unconditionally */ - netdev->features &= ~NETIF_F_NTUPLE; - } - -#ifdef NETIF_F_RXHASH - if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) - netdev->features &= ~NETIF_F_RXHASH; - -#endif /* NETIF_F_RXHASH */ - if (netdev->features & NETIF_F_LRO) { - if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) && - ((adapter->rx_itr_setting == 1) || - (adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR))) { - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - } else if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) { -#ifdef IXGBE_NO_LRO - e_info(probe, "InterruptThrottleRate set too high, " - "disabling RSC\n"); -#else - e_info(probe, "InterruptThrottleRate set too high, " - "falling back to software LRO\n"); -#endif - } - } -#ifdef CONFIG_DCB - //netdev->dcbnl_ops = &dcbnl_ops; -#endif - -#ifdef IXGBE_FCOE -#ifdef NETIF_F_FSO - if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { - ixgbe_get_device_caps(hw, &device_caps); - if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) { - adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; - adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; - e_info(probe, "FCoE offload feature is not available. " - "Disabling FCoE offload feature\n"); - } -#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE - else { - adapter->flags |= IXGBE_FLAG_FCOE_ENABLED; - adapter->ring_feature[RING_F_FCOE].indices = - IXGBE_FCRETA_SIZE; - netdev->features |= NETIF_F_FSO | - NETIF_F_FCOE_CRC | - NETIF_F_FCOE_MTU; - netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; - } -#endif /* HAVE_NETDEV_OPS_FCOE_ENABLE */ -#ifdef HAVE_NETDEV_VLAN_FEATURES - netdev->vlan_features |= NETIF_F_FSO | - NETIF_F_FCOE_CRC | - NETIF_F_FCOE_MTU; -#endif /* HAVE_NETDEV_VLAN_FEATURES */ - } -#endif /* NETIF_F_FSO */ -#endif /* IXGBE_FCOE */ - -#endif /* MAX_SKB_FRAGS */ - /* make sure the EEPROM is good */ - if (hw->eeprom.ops.validate_checksum && - (hw->eeprom.ops.validate_checksum(hw, NULL) < 0)) { - e_dev_err("The EEPROM Checksum Is Not Valid\n"); - err = -EIO; - goto err_sw_init; - } - - memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); -#ifdef ETHTOOL_GPERMADDR - memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); - - if (ixgbe_validate_mac_addr(netdev->perm_addr)) { - e_dev_err("invalid MAC address\n"); - err = -EIO; - goto err_sw_init; - } -#else - if (ixgbe_validate_mac_addr(netdev->dev_addr)) { - e_dev_err("invalid MAC address\n"); - err = -EIO; - goto err_sw_init; - } -#endif - memcpy(&adapter->mac_table[0].addr, hw->mac.perm_addr, - netdev->addr_len); - adapter->mac_table[0].queue = adapter->num_vfs; - adapter->mac_table[0].state = (IXGBE_MAC_STATE_DEFAULT | - IXGBE_MAC_STATE_IN_USE); - hw->mac.ops.set_rar(hw, 0, adapter->mac_table[0].addr, - adapter->mac_table[0].queue, - IXGBE_RAH_AV); - - //setup_timer(&adapter->service_timer, &ixgbe_service_timer, - // (unsigned long) adapter); - - //INIT_WORK(&adapter->service_task, ixgbe_service_task); - //clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); - - //err = ixgbe_init_interrupt_scheme(adapter); - //if (err) - // goto err_sw_init; - - //adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; - ixgbe_set_num_queues(adapter); - - adapter->wol = 0; - /* WOL not supported for all but the following */ - switch (pdev->device) { - case IXGBE_DEV_ID_82599_SFP: - /* Only these subdevice supports WOL */ - switch (pdev->subsystem_device) { - case IXGBE_SUBDEV_ID_82599_560FLR: - /* only support first port */ - if (hw->bus.func != 0) - break; - case IXGBE_SUBDEV_ID_82599_SFP: - adapter->wol = IXGBE_WUFC_MAG; - break; - } - break; - case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: - /* All except this subdevice support WOL */ - if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) - adapter->wol = IXGBE_WUFC_MAG; - break; - case IXGBE_DEV_ID_82599_KX4: - adapter->wol = IXGBE_WUFC_MAG; - break; - case IXGBE_DEV_ID_X540T: - /* Check eeprom to see if it is enabled */ - ixgbe_read_eeprom(hw, 0x2c, &adapter->eeprom_cap); - wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; - - if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || - ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && - (hw->bus.func == 0))) - adapter->wol = IXGBE_WUFC_MAG; - break; - } - //device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); - - - /* - * Save off EEPROM version number and Option Rom version which - * together make a unique identify for the eeprom - */ - ixgbe_read_eeprom(hw, 0x2e, &eeprom_verh); - ixgbe_read_eeprom(hw, 0x2d, &eeprom_verl); - - etrack_id = (eeprom_verh << 16) | eeprom_verl; - - ixgbe_read_eeprom(hw, 0x17, &offset); - - /* Make sure offset to SCSI block is valid */ - if (!(offset == 0x0) && !(offset == 0xffff)) { - ixgbe_read_eeprom(hw, offset + 0x84, &eeprom_cfg_blkh); - ixgbe_read_eeprom(hw, offset + 0x83, &eeprom_cfg_blkl); - - /* Only display Option Rom if exist */ - if (eeprom_cfg_blkl && eeprom_cfg_blkh) { - major = eeprom_cfg_blkl >> 8; - build = (eeprom_cfg_blkl << 8) | (eeprom_cfg_blkh >> 8); - patch = eeprom_cfg_blkh & 0x00ff; - - snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), - "0x%08x, %d.%d.%d", etrack_id, major, build, - patch); - } else { - snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), - "0x%08x", etrack_id); - } - } else { - snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), - "0x%08x", etrack_id); - } - - /* reset the hardware with the new settings */ - err = hw->mac.ops.start_hw(hw); - if (err == IXGBE_ERR_EEPROM_VERSION) { - /* We are running on a pre-production device, log a warning */ - e_dev_warn("This device is a pre-production adapter/LOM. " - "Please be aware there may be issues associated " - "with your hardware. If you are experiencing " - "problems please contact your Intel or hardware " - "representative who provided you with this " - "hardware.\n"); - } - /* pick up the PCI bus settings for reporting later */ - if (hw->mac.ops.get_bus_info) - hw->mac.ops.get_bus_info(hw); - - strlcpy(netdev->name, "eth%d", sizeof(netdev->name)); - *lad_dev = netdev; - - adapter->netdev_registered = true; -#ifdef NO_VNIC - /* power down the optics */ - if ((hw->phy.multispeed_fiber) || - ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && - (hw->mac.type == ixgbe_mac_82599EB))) - ixgbe_disable_tx_laser(hw); - - /* carrier off reporting is important to ethtool even BEFORE open */ - netif_carrier_off(netdev); - /* keep stopping all the transmit queues for older kernels */ - netif_tx_stop_all_queues(netdev); -#endif - - /* print all messages at the end so that we use our eth%d name */ - /* print bus type/speed/width info */ - e_dev_info("(PCI Express:%s:%s) ", - (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" : - hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" : - "Unknown"), - (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" : - hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" : - hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" : - "Unknown")); - - /* print the MAC address */ - for (i = 0; i < 6; i++) - pr_cont("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); - - /* First try to read PBA as a string */ - err = ixgbe_read_pba_string(hw, part_str, IXGBE_PBANUM_LENGTH); - if (err) - strlcpy(part_str, "Unknown", sizeof(part_str)); - if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) - e_info(probe, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", - hw->mac.type, hw->phy.type, hw->phy.sfp_type, part_str); - else - e_info(probe, "MAC: %d, PHY: %d, PBA No: %s\n", - hw->mac.type, hw->phy.type, part_str); - - if (((hw->bus.speed == ixgbe_bus_speed_2500) && - (hw->bus.width <= ixgbe_bus_width_pcie_x4)) || - (hw->bus.width <= ixgbe_bus_width_pcie_x2)) { - e_dev_warn("PCI-Express bandwidth available for this " - "card is not sufficient for optimal " - "performance.\n"); - e_dev_warn("For optimal performance a x8 PCI-Express " - "slot is required.\n"); - } - -#define INFO_STRING_LEN 255 - info_string = kzalloc(INFO_STRING_LEN, GFP_KERNEL); - if (!info_string) { - e_err(probe, "allocation for info string failed\n"); - goto no_info_string; - } - count = 0; - i_s_var = info_string; - count += snprintf(i_s_var, INFO_STRING_LEN, "Enabled Features: "); - - i_s_var = info_string + count; - count += snprintf(i_s_var, (INFO_STRING_LEN - count), - "RxQ: %d TxQ: %d ", adapter->num_rx_queues, - adapter->num_tx_queues); - i_s_var = info_string + count; -#ifdef IXGBE_FCOE - if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, "FCoE "); - i_s_var = info_string + count; - } -#endif - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, - "FdirHash "); - i_s_var = info_string + count; - } - if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, - "FdirPerfect "); - i_s_var = info_string + count; - } - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, "DCB "); - i_s_var = info_string + count; - } - if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, "RSS "); - i_s_var = info_string + count; - } - if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, "DCA "); - i_s_var = info_string + count; - } - if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, "RSC "); - i_s_var = info_string + count; - } -#ifndef IXGBE_NO_LRO - else if (netdev->features & NETIF_F_LRO) { - count += snprintf(i_s_var, INFO_STRING_LEN - count, "LRO "); - i_s_var = info_string + count; - } -#endif - - BUG_ON(i_s_var > (info_string + INFO_STRING_LEN)); - /* end features printing */ - e_info(probe, "%s\n", info_string); - kfree(info_string); -no_info_string: - - /* firmware requires blank driver version */ - ixgbe_set_fw_drv_ver(hw, 0xFF, 0xFF, 0xFF, 0xFF); - -#if defined(HAVE_NETDEV_STORAGE_ADDRESS) && defined(NETDEV_HW_ADDR_T_SAN) - /* add san mac addr to netdev */ - //ixgbe_add_sanmac_netdev(netdev); - -#endif /* (HAVE_NETDEV_STORAGE_ADDRESS) && (NETDEV_HW_ADDR_T_SAN) */ - e_info(probe, "Intel(R) 10 Gigabit Network Connection\n"); - cards_found++; - -#ifdef IXGBE_SYSFS - //if (ixgbe_sysfs_init(adapter)) - // e_err(probe, "failed to allocate sysfs resources\n"); -#else -#ifdef IXGBE_PROCFS - //if (ixgbe_procfs_init(adapter)) - // e_err(probe, "failed to allocate procfs resources\n"); -#endif /* IXGBE_PROCFS */ -#endif /* IXGBE_SYSFS */ - - return 0; - -//err_register: - //ixgbe_clear_interrupt_scheme(adapter); - //ixgbe_release_hw_control(adapter); -err_sw_init: - adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; - if (adapter->mac_table) - kfree(adapter->mac_table); - iounmap(hw->hw_addr); -err_ioremap: - free_netdev(netdev); -err_alloc_etherdev: - //pci_release_selected_regions(pdev, - // pci_select_bars(pdev, IORESOURCE_MEM)); -//err_pci_reg: -//err_dma: - pci_disable_device(pdev); - return err; -} - -/** - * ixgbe_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * ixgbe_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - **/ -void ixgbe_kni_remove(struct pci_dev *pdev) -{ - pci_disable_device(pdev); -} - - -u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg) -{ - u16 value; - struct ixgbe_adapter *adapter = hw->back; - - pci_read_config_word(adapter->pdev, reg, &value); - return value; -} - -void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value) -{ - struct ixgbe_adapter *adapter = hw->back; - - pci_write_config_word(adapter->pdev, reg, value); -} - -void ewarn(struct ixgbe_hw *hw, const char *st, u32 status) -{ - struct ixgbe_adapter *adapter = hw->back; - - netif_warn(adapter, drv, adapter->netdev, "%s", st); -} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h deleted file mode 100644 index 53ace941e2..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h +++ /dev/null @@ -1,90 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_MBX_H_ -#define _IXGBE_MBX_H_ - -#include "ixgbe_type.h" - -#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ -#define IXGBE_ERR_MBX -100 - -#define IXGBE_VFMAILBOX 0x002FC -#define IXGBE_VFMBMEM 0x00200 - -/* Define mailbox register bits */ -#define IXGBE_VFMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */ -#define IXGBE_VFMAILBOX_ACK 0x00000002 /* Ack PF message received */ -#define IXGBE_VFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ -#define IXGBE_VFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ -#define IXGBE_VFMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */ -#define IXGBE_VFMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */ -#define IXGBE_VFMAILBOX_RSTI 0x00000040 /* PF has reset indication */ -#define IXGBE_VFMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */ -#define IXGBE_VFMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */ - -#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */ -#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ -#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ -#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ -#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ - -#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */ -#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ -#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */ -#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ - - -/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the - * PF. The reverse is true if it is IXGBE_PF_*. - * Message ACK's are the value or'd with 0xF0000000 - */ -#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with - * this are the ACK */ -#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with - * this are the NACK */ -#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still - * clear to send requests */ -#define IXGBE_VT_MSGINFO_SHIFT 16 -/* bits 23:16 are used for extra info for certain messages */ -#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT) - -#define IXGBE_VF_RESET 0x01 /* VF requests reset */ -#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */ -#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */ -#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */ -#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */ -#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */ - -/* length of permanent address message returned from PF */ -#define IXGBE_VF_PERMADDR_MSG_LEN 4 -/* word in permanent address message with the current multicast type */ -#define IXGBE_VF_MC_TYPE_WORD 3 - -#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */ - - -#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ -#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ - -s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16); -s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16); -s32 ixgbe_read_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16); -s32 ixgbe_write_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16); -s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16); -s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16); -s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16); -void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw); -void ixgbe_init_mbx_params_vf(struct ixgbe_hw *); -void ixgbe_init_mbx_params_pf(struct ixgbe_hw *); - -#endif /* _IXGBE_MBX_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h deleted file mode 100644 index 7b3f8c51d2..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h +++ /dev/null @@ -1,117 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - - -/* glue for the OS independent part of ixgbe - * includes register access macros - */ - -#ifndef _IXGBE_OSDEP_H_ -#define _IXGBE_OSDEP_H_ - -#include -#include -#include -#include -#include -#include "kcompat.h" - - -#ifndef msleep -#define msleep(x) do { if (in_interrupt()) { \ - /* Don't mdelay in interrupt context! */ \ - BUG(); \ - } else { \ - msleep(x); \ - } } while (0) - -#endif - -#undef ASSERT - -#ifdef DBG -#define hw_dbg(hw, S, A...) printk(KERN_DEBUG S, ## A) -#else -#define hw_dbg(hw, S, A...) do {} while (0) -#endif - -#define e_dev_info(format, arg...) \ - dev_info(pci_dev_to_dev(adapter->pdev), format, ## arg) -#define e_dev_warn(format, arg...) \ - dev_warn(pci_dev_to_dev(adapter->pdev), format, ## arg) -#define e_dev_err(format, arg...) \ - dev_err(pci_dev_to_dev(adapter->pdev), format, ## arg) -#define e_dev_notice(format, arg...) \ - dev_notice(pci_dev_to_dev(adapter->pdev), format, ## arg) -#define e_info(msglvl, format, arg...) \ - netif_info(adapter, msglvl, adapter->netdev, format, ## arg) -#define e_err(msglvl, format, arg...) \ - netif_err(adapter, msglvl, adapter->netdev, format, ## arg) -#define e_warn(msglvl, format, arg...) \ - netif_warn(adapter, msglvl, adapter->netdev, format, ## arg) -#define e_crit(msglvl, format, arg...) \ - netif_crit(adapter, msglvl, adapter->netdev, format, ## arg) - - -#ifdef DBG -#define IXGBE_WRITE_REG(a, reg, value) do {\ - switch (reg) { \ - case IXGBE_EIMS: \ - case IXGBE_EIMC: \ - case IXGBE_EIAM: \ - case IXGBE_EIAC: \ - case IXGBE_EICR: \ - case IXGBE_EICS: \ - printk("%s: Reg - 0x%05X, value - 0x%08X\n", __func__, \ - reg, (u32)(value)); \ - default: \ - break; \ - } \ - writel((value), ((a)->hw_addr + (reg))); \ -} while (0) -#else -#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) -#endif - -#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg)) - -#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) ( \ - writel((value), ((a)->hw_addr + (reg) + ((offset) << 2)))) - -#define IXGBE_READ_REG_ARRAY(a, reg, offset) ( \ - readl((a)->hw_addr + (reg) + ((offset) << 2))) - -#ifndef writeq -#define writeq(val, addr) do { writel((u32) (val), addr); \ - writel((u32) (val >> 32), (addr + 4)); \ - } while (0); -#endif - -#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg))) - -#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS) -struct ixgbe_hw; -extern u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg); -extern void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value); -extern void ewarn(struct ixgbe_hw *hw, const char *str, u32 status); - -#define IXGBE_READ_PCIE_WORD ixgbe_read_pci_cfg_word -#define IXGBE_WRITE_PCIE_WORD ixgbe_write_pci_cfg_word -#define IXGBE_EEPROM_GRANT_ATTEMPS 100 -#define IXGBE_HTONL(_i) htonl(_i) -#define IXGBE_NTOHL(_i) ntohl(_i) -#define IXGBE_NTOHS(_i) ntohs(_i) -#define IXGBE_CPU_TO_LE32(_i) cpu_to_le32(_i) -#define IXGBE_LE32_TO_CPUS(_i) le32_to_cpus(_i) -#define EWARN(H, W, S) ewarn(H, W, S) - -#endif /* _IXGBE_OSDEP_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c deleted file mode 100644 index a47a2ff8e2..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c +++ /dev/null @@ -1,1832 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_api.h" -#include "ixgbe_common.h" -#include "ixgbe_phy.h" - -static void ixgbe_i2c_start(struct ixgbe_hw *hw); -static void ixgbe_i2c_stop(struct ixgbe_hw *hw); -static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data); -static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data); -static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw); -static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data); -static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data); -static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); -static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); -static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); -static bool ixgbe_get_i2c_data(u32 *i2cctl); - -/** - * ixgbe_init_phy_ops_generic - Inits PHY function ptrs - * @hw: pointer to the hardware structure - * - * Initialize the function pointers. - **/ -s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_phy_info *phy = &hw->phy; - - /* PHY */ - phy->ops.identify = &ixgbe_identify_phy_generic; - phy->ops.reset = &ixgbe_reset_phy_generic; - phy->ops.read_reg = &ixgbe_read_phy_reg_generic; - phy->ops.write_reg = &ixgbe_write_phy_reg_generic; - phy->ops.setup_link = &ixgbe_setup_phy_link_generic; - phy->ops.setup_link_speed = &ixgbe_setup_phy_link_speed_generic; - phy->ops.check_link = NULL; - phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic; - phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_generic; - phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_generic; - phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic; - phy->ops.write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic; - phy->ops.i2c_bus_clear = &ixgbe_i2c_bus_clear; - phy->ops.identify_sfp = &ixgbe_identify_module_generic; - phy->sfp_type = ixgbe_sfp_type_unknown; - phy->ops.check_overtemp = &ixgbe_tn_check_overtemp; - return 0; -} - -/** - * ixgbe_identify_phy_generic - Get physical layer module - * @hw: pointer to hardware structure - * - * Determines the physical layer module found on the current adapter. - **/ -s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; - u32 phy_addr; - u16 ext_ability = 0; - - if (hw->phy.type == ixgbe_phy_unknown) { - for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { - if (ixgbe_validate_phy_addr(hw, phy_addr)) { - hw->phy.addr = phy_addr; - ixgbe_get_phy_id(hw); - hw->phy.type = - ixgbe_get_phy_type_from_id(hw->phy.id); - - if (hw->phy.type == ixgbe_phy_unknown) { - hw->phy.ops.read_reg(hw, - IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &ext_ability); - if (ext_ability & - (IXGBE_MDIO_PHY_10GBASET_ABILITY | - IXGBE_MDIO_PHY_1000BASET_ABILITY)) - hw->phy.type = - ixgbe_phy_cu_unknown; - else - hw->phy.type = - ixgbe_phy_generic; - } - - status = 0; - break; - } - } - /* clear value if nothing found */ - if (status != 0) - hw->phy.addr = 0; - } else { - status = 0; - } - - return status; -} - -/** - * ixgbe_validate_phy_addr - Determines phy address is valid - * @hw: pointer to hardware structure - * - **/ -bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) -{ - u16 phy_id = 0; - bool valid = false; - - hw->phy.addr = phy_addr; - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id); - - if (phy_id != 0xFFFF && phy_id != 0x0) - valid = true; - - return valid; -} - -/** - * ixgbe_get_phy_id - Get the phy type - * @hw: pointer to hardware structure - * - **/ -s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) -{ - u32 status; - u16 phy_id_high = 0; - u16 phy_id_low = 0; - - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &phy_id_high); - - if (status == 0) { - hw->phy.id = (u32)(phy_id_high << 16); - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &phy_id_low); - hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); - hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); - } - return status; -} - -/** - * ixgbe_get_phy_type_from_id - Get the phy type - * @hw: pointer to hardware structure - * - **/ -enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) -{ - enum ixgbe_phy_type phy_type; - - switch (phy_id) { - case TN1010_PHY_ID: - phy_type = ixgbe_phy_tn; - break; - case X540_PHY_ID: - phy_type = ixgbe_phy_aq; - break; - case QT2022_PHY_ID: - phy_type = ixgbe_phy_qt; - break; - case ATH_PHY_ID: - phy_type = ixgbe_phy_nl; - break; - default: - phy_type = ixgbe_phy_unknown; - break; - } - - hw_dbg(hw, "phy type found is %d\n", phy_type); - return phy_type; -} - -/** - * ixgbe_reset_phy_generic - Performs a PHY reset - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) -{ - u32 i; - u16 ctrl = 0; - s32 status = 0; - - if (hw->phy.type == ixgbe_phy_unknown) - status = ixgbe_identify_phy_generic(hw); - - if (status != 0 || hw->phy.type == ixgbe_phy_none) - goto out; - - /* Don't reset PHY if it's shut down due to overtemp. */ - if (!hw->phy.reset_if_overtemp && - (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) - goto out; - - /* - * Perform soft PHY reset to the PHY_XS. - * This will cause a soft reset to the PHY - */ - hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, - IXGBE_MDIO_PHY_XS_RESET); - - /* - * Poll for reset bit to self-clear indicating reset is complete. - * Some PHYs could take up to 3 seconds to complete and need about - * 1.7 usec delay after the reset is complete. - */ - for (i = 0; i < 30; i++) { - msleep(100); - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl); - if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) { - udelay(2); - break; - } - } - - if (ctrl & IXGBE_MDIO_PHY_XS_RESET) { - status = IXGBE_ERR_RESET_FAILED; - hw_dbg(hw, "PHY reset polling failed to complete.\n"); - } - -out: - return status; -} - -/** - * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @phy_data: Pointer to read data from PHY register - **/ -s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 *phy_data) -{ - u32 command; - u32 i; - u32 data; - s32 status = 0; - u16 gssr; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - gssr = IXGBE_GSSR_PHY1_SM; - else - gssr = IXGBE_GSSR_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address command did not complete.\n"); - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - /* - * Address cycle complete, setup and write the read - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY read command didn't complete\n"); - status = IXGBE_ERR_PHY; - } else { - /* - * Read operation is complete. Get the data - * from MSRWD - */ - data = IXGBE_READ_REG(hw, IXGBE_MSRWD); - data >>= IXGBE_MSRWD_READ_DATA_SHIFT; - *phy_data = (u16)(data); - } - } - - hw->mac.ops.release_swfw_sync(hw, gssr); - } - - return status; -} - -/** - * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 5 bit device type - * @phy_data: Data to write to the PHY register - **/ -s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 phy_data) -{ - u32 command; - u32 i; - s32 status = 0; - u16 gssr; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - gssr = IXGBE_GSSR_PHY1_SM; - else - gssr = IXGBE_GSSR_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - /* Put the data in the MDI single read and write data register*/ - IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - /* - * Address cycle complete, setup and write the write - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - } - - hw->mac.ops.release_swfw_sync(hw, gssr); - } - - return status; -} - -/** - * ixgbe_setup_phy_link_generic - Set and restart autoneg - * @hw: pointer to hardware structure - * - * Restart autonegotiation and PHY and waits for completion. - **/ -s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) -{ - s32 status = 0; - u32 time_out; - u32 max_time_out = 10; - u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; - bool autoneg = false; - ixgbe_link_speed speed; - - ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - /* Set or unset auto-negotiation 10G advertisement */ - hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) - autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; - - hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - autoneg_reg); - } - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) { - /* Set or unset auto-negotiation 1G advertisement */ - hw->phy.ops.read_reg(hw, - IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) - autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE; - - hw->phy.ops.write_reg(hw, - IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - autoneg_reg); - } - - if (speed & IXGBE_LINK_SPEED_100_FULL) { - /* Set or unset auto-negotiation 100M advertisement */ - hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE | - IXGBE_MII_100BASE_T_ADVERTISE_HALF); - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) - autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; - - hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - autoneg_reg); - } - - /* Restart PHY autonegotiation and wait for completion */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); - - autoneg_reg |= IXGBE_MII_RESTART; - - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); - - /* Wait for autonegotiation to finish */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - /* Restart PHY autonegotiation and wait for completion */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; - if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) - break; - } - - if (time_out == max_time_out) { - status = IXGBE_ERR_LINK_SETUP; - hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out"); - } - - return status; -} - -/** - * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - **/ -s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - - /* - * Clear autoneg_advertised and set new values based on input link - * speed. - */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - if (speed & IXGBE_LINK_SPEED_100_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; - - /* Setup link based on the new speed settings */ - hw->phy.ops.setup_link(hw); - - return 0; -} - -/** - * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: boolean auto-negotiation value - * - * Determines the link capabilities by reading the AUTOC register. - **/ -s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) -{ - s32 status = IXGBE_ERR_LINK_SETUP; - u16 speed_ability; - - *speed = 0; - *autoneg = true; - - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &speed_ability); - - if (status == 0) { - if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M) - *speed |= IXGBE_LINK_SPEED_100_FULL; - } - - return status; -} - -/** - * ixgbe_check_phy_link_tnx - Determine link and speed status - * @hw: pointer to hardware structure - * - * Reads the VS1 register to determine if link is up and the current speed for - * the PHY. - **/ -s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up) -{ - s32 status = 0; - u32 time_out; - u32 max_time_out = 10; - u16 phy_link = 0; - u16 phy_speed = 0; - u16 phy_data = 0; - - /* Initialize speed and link to default case */ - *link_up = false; - *speed = IXGBE_LINK_SPEED_10GB_FULL; - - /* - * Check current speed and link status of the PHY register. - * This is a vendor specific register and may have to - * be changed for other copper PHYs. - */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - &phy_data); - phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; - phy_speed = phy_data & - IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; - if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { - *link_up = true; - if (phy_speed == - IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) - *speed = IXGBE_LINK_SPEED_1GB_FULL; - break; - } - } - - return status; -} - -/** - * ixgbe_setup_phy_link_tnx - Set and restart autoneg - * @hw: pointer to hardware structure - * - * Restart autonegotiation and PHY and waits for completion. - **/ -s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) -{ - s32 status = 0; - u32 time_out; - u32 max_time_out = 10; - u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; - bool autoneg = false; - ixgbe_link_speed speed; - - ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - /* Set or unset auto-negotiation 10G advertisement */ - hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) - autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; - - hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - autoneg_reg); - } - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) { - /* Set or unset auto-negotiation 1G advertisement */ - hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) - autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; - - hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - autoneg_reg); - } - - if (speed & IXGBE_LINK_SPEED_100_FULL) { - /* Set or unset auto-negotiation 100M advertisement */ - hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) - autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; - - hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - autoneg_reg); - } - - /* Restart PHY autonegotiation and wait for completion */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); - - autoneg_reg |= IXGBE_MII_RESTART; - - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); - - /* Wait for autonegotiation to finish */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - /* Restart PHY autonegotiation and wait for completion */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; - if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) - break; - } - - if (time_out == max_time_out) { - status = IXGBE_ERR_LINK_SETUP; - hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out"); - } - - return status; -} - -/** - * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version - * @hw: pointer to hardware structure - * @firmware_version: pointer to the PHY Firmware Version - **/ -s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, - u16 *firmware_version) -{ - s32 status = 0; - - status = hw->phy.ops.read_reg(hw, TNX_FW_REV, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - firmware_version); - - return status; -} - -/** - * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version - * @hw: pointer to hardware structure - * @firmware_version: pointer to the PHY Firmware Version - **/ -s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, - u16 *firmware_version) -{ - s32 status = 0; - - status = hw->phy.ops.read_reg(hw, AQ_FW_REV, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - firmware_version); - - return status; -} - -/** - * ixgbe_reset_phy_nl - Performs a PHY reset - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) -{ - u16 phy_offset, control, eword, edata, block_crc; - bool end_data = false; - u16 list_offset, data_offset; - u16 phy_data = 0; - s32 ret_val = 0; - u32 i; - - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); - - /* reset the PHY and poll for completion */ - hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, - (phy_data | IXGBE_MDIO_PHY_XS_RESET)); - - for (i = 0; i < 100; i++) { - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); - if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) - break; - msleep(10); - } - - if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { - hw_dbg(hw, "PHY reset did not complete.\n"); - ret_val = IXGBE_ERR_PHY; - goto out; - } - - /* Get init offsets */ - ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, - &data_offset); - if (ret_val != 0) - goto out; - - ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); - data_offset++; - while (!end_data) { - /* - * Read control word from PHY init contents offset - */ - ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); - control = (eword & IXGBE_CONTROL_MASK_NL) >> - IXGBE_CONTROL_SHIFT_NL; - edata = eword & IXGBE_DATA_MASK_NL; - switch (control) { - case IXGBE_DELAY_NL: - data_offset++; - hw_dbg(hw, "DELAY: %d MS\n", edata); - msleep(edata); - break; - case IXGBE_DATA_NL: - hw_dbg(hw, "DATA:\n"); - data_offset++; - hw->eeprom.ops.read(hw, data_offset++, - &phy_offset); - for (i = 0; i < edata; i++) { - hw->eeprom.ops.read(hw, data_offset, &eword); - hw->phy.ops.write_reg(hw, phy_offset, - IXGBE_TWINAX_DEV, eword); - hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, - phy_offset); - data_offset++; - phy_offset++; - } - break; - case IXGBE_CONTROL_NL: - data_offset++; - hw_dbg(hw, "CONTROL:\n"); - if (edata == IXGBE_CONTROL_EOL_NL) { - hw_dbg(hw, "EOL\n"); - end_data = true; - } else if (edata == IXGBE_CONTROL_SOL_NL) { - hw_dbg(hw, "SOL\n"); - } else { - hw_dbg(hw, "Bad control value\n"); - ret_val = IXGBE_ERR_PHY; - goto out; - } - break; - default: - hw_dbg(hw, "Bad control type\n"); - ret_val = IXGBE_ERR_PHY; - goto out; - } - } - -out: - return ret_val; -} - -/** - * ixgbe_identify_module_generic - Identifies module type - * @hw: pointer to hardware structure - * - * Determines HW type and calls appropriate function. - **/ -s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_SFP_NOT_PRESENT; - - switch (hw->mac.ops.get_media_type(hw)) { - case ixgbe_media_type_fiber: - status = ixgbe_identify_sfp_module_generic(hw); - break; - - case ixgbe_media_type_fiber_qsfp: - status = ixgbe_identify_qsfp_module_generic(hw); - break; - - default: - hw->phy.sfp_type = ixgbe_sfp_type_not_present; - status = IXGBE_ERR_SFP_NOT_PRESENT; - break; - } - - return status; -} - -/** - * ixgbe_identify_sfp_module_generic - Identifies SFP modules - * @hw: pointer to hardware structure - * - * Searches for and identifies the SFP module and assigns appropriate PHY type. - **/ -s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; - u32 vendor_oui = 0; - enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; - u8 identifier = 0; - u8 comp_codes_1g = 0; - u8 comp_codes_10g = 0; - u8 oui_bytes[3] = {0, 0, 0}; - u8 cable_tech = 0; - u8 cable_spec = 0; - u16 enforce_sfp = 0; - - if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { - hw->phy.sfp_type = ixgbe_sfp_type_not_present; - status = IXGBE_ERR_SFP_NOT_PRESENT; - goto out; - } - - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_IDENTIFIER, - &identifier); - - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) - goto err_read_i2c_eeprom; - - /* LAN ID is needed for sfp_type determination */ - hw->mac.ops.set_lan_id(hw); - - if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { - hw->phy.type = ixgbe_phy_sfp_unsupported; - status = IXGBE_ERR_SFP_NOT_SUPPORTED; - } else { - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_1GBE_COMP_CODES, - &comp_codes_1g); - - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) - goto err_read_i2c_eeprom; - - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_10GBE_COMP_CODES, - &comp_codes_10g); - - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) - goto err_read_i2c_eeprom; - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_CABLE_TECHNOLOGY, - &cable_tech); - - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) - goto err_read_i2c_eeprom; - - /* ID Module - * ========= - * 0 SFP_DA_CU - * 1 SFP_SR - * 2 SFP_LR - * 3 SFP_DA_CORE0 - 82599-specific - * 4 SFP_DA_CORE1 - 82599-specific - * 5 SFP_SR/LR_CORE0 - 82599-specific - * 6 SFP_SR/LR_CORE1 - 82599-specific - * 7 SFP_act_lmt_DA_CORE0 - 82599-specific - * 8 SFP_act_lmt_DA_CORE1 - 82599-specific - * 9 SFP_1g_cu_CORE0 - 82599-specific - * 10 SFP_1g_cu_CORE1 - 82599-specific - * 11 SFP_1g_sx_CORE0 - 82599-specific - * 12 SFP_1g_sx_CORE1 - 82599-specific - */ - if (hw->mac.type == ixgbe_mac_82598EB) { - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.sfp_type = ixgbe_sfp_type_da_cu; - else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_sr; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_lr; - else - hw->phy.sfp_type = ixgbe_sfp_type_unknown; - } else if (hw->mac.type == ixgbe_mac_82599EB) { - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_da_cu_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_da_cu_core1; - } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { - hw->phy.ops.read_i2c_eeprom( - hw, IXGBE_SFF_CABLE_SPEC_COMP, - &cable_spec); - if (cable_spec & - IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_da_act_lmt_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_da_act_lmt_core1; - } else { - hw->phy.sfp_type = - ixgbe_sfp_type_unknown; - } - } else if (comp_codes_10g & - (IXGBE_SFF_10GBASESR_CAPABLE | - IXGBE_SFF_10GBASELR_CAPABLE)) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_srlr_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_srlr_core1; - } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_1g_cu_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_1g_cu_core1; - } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_1g_sx_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_1g_sx_core1; - } else { - hw->phy.sfp_type = ixgbe_sfp_type_unknown; - } - } - - if (hw->phy.sfp_type != stored_sfp_type) - hw->phy.sfp_setup_needed = true; - - /* Determine if the SFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; - if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && - (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || - ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && - (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) - hw->phy.multispeed_fiber = true; - - /* Determine PHY vendor */ - if (hw->phy.type != ixgbe_phy_nl) { - hw->phy.id = identifier; - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE0, - &oui_bytes[0]); - - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) - goto err_read_i2c_eeprom; - - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE1, - &oui_bytes[1]); - - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) - goto err_read_i2c_eeprom; - - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE2, - &oui_bytes[2]); - - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) - goto err_read_i2c_eeprom; - - vendor_oui = - ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | - (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | - (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); - - switch (vendor_oui) { - case IXGBE_SFF_VENDOR_OUI_TYCO: - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.type = - ixgbe_phy_sfp_passive_tyco; - break; - case IXGBE_SFF_VENDOR_OUI_FTL: - if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) - hw->phy.type = ixgbe_phy_sfp_ftl_active; - else - hw->phy.type = ixgbe_phy_sfp_ftl; - break; - case IXGBE_SFF_VENDOR_OUI_AVAGO: - hw->phy.type = ixgbe_phy_sfp_avago; - break; - case IXGBE_SFF_VENDOR_OUI_INTEL: - hw->phy.type = ixgbe_phy_sfp_intel; - break; - default: - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.type = - ixgbe_phy_sfp_passive_unknown; - else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) - hw->phy.type = - ixgbe_phy_sfp_active_unknown; - else - hw->phy.type = ixgbe_phy_sfp_unknown; - break; - } - } - - /* Allow any DA cable vendor */ - if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | - IXGBE_SFF_DA_ACTIVE_CABLE)) { - status = 0; - goto out; - } - - /* Verify supported 1G SFP modules */ - if (comp_codes_10g == 0 && - !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { - hw->phy.type = ixgbe_phy_sfp_unsupported; - status = IXGBE_ERR_SFP_NOT_SUPPORTED; - goto out; - } - - /* Anything else 82598-based is supported */ - if (hw->mac.type == ixgbe_mac_82598EB) { - status = 0; - goto out; - } - - ixgbe_get_device_caps(hw, &enforce_sfp); - if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && - !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) || - (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) || - (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0) || - (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1))) { - /* Make sure we're a supported PHY type */ - if (hw->phy.type == ixgbe_phy_sfp_intel) { - status = 0; - } else { - if (hw->allow_unsupported_sfp == true) { - EWARN(hw, "WARNING: Intel (R) Network " - "Connections are quality tested " - "using Intel (R) Ethernet Optics." - " Using untested modules is not " - "supported and may cause unstable" - " operation or damage to the " - "module or the adapter. Intel " - "Corporation is not responsible " - "for any harm caused by using " - "untested modules.\n", status); - status = 0; - } else { - hw_dbg(hw, "SFP+ module not supported\n"); - hw->phy.type = - ixgbe_phy_sfp_unsupported; - status = IXGBE_ERR_SFP_NOT_SUPPORTED; - } - } - } else { - status = 0; - } - } - -out: - return status; - -err_read_i2c_eeprom: - hw->phy.sfp_type = ixgbe_sfp_type_not_present; - if (hw->phy.type != ixgbe_phy_nl) { - hw->phy.id = 0; - hw->phy.type = ixgbe_phy_unknown; - } - return IXGBE_ERR_SFP_NOT_PRESENT; -} - -/** - * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules - * @hw: pointer to hardware structure - * - * Searches for and identifies the QSFP module and assigns appropriate PHY type - **/ -s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) -{ - s32 status = 0; - - if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { - hw->phy.sfp_type = ixgbe_sfp_type_not_present; - status = IXGBE_ERR_SFP_NOT_PRESENT; - } - - return status; -} - - -/** - * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence - * @hw: pointer to hardware structure - * @list_offset: offset to the SFP ID list - * @data_offset: offset to the SFP data block - * - * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if - * so it returns the offsets to the phy init sequence block. - **/ -s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, - u16 *list_offset, - u16 *data_offset) -{ - u16 sfp_id; - u16 sfp_type = hw->phy.sfp_type; - - if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) - return IXGBE_ERR_SFP_NOT_SUPPORTED; - - if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) - return IXGBE_ERR_SFP_NOT_PRESENT; - - if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && - (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) - return IXGBE_ERR_SFP_NOT_SUPPORTED; - - /* - * Limiting active cables and 1G Phys must be initialized as - * SR modules - */ - if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || - sfp_type == ixgbe_sfp_type_1g_cu_core0 || - sfp_type == ixgbe_sfp_type_1g_sx_core0) - sfp_type = ixgbe_sfp_type_srlr_core0; - else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || - sfp_type == ixgbe_sfp_type_1g_cu_core1 || - sfp_type == ixgbe_sfp_type_1g_sx_core1) - sfp_type = ixgbe_sfp_type_srlr_core1; - - /* Read offset to PHY init contents */ - hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); - - if ((!*list_offset) || (*list_offset == 0xFFFF)) - return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; - - /* Shift offset to first ID word */ - (*list_offset)++; - - /* - * Find the matching SFP ID in the EEPROM - * and program the init sequence - */ - hw->eeprom.ops.read(hw, *list_offset, &sfp_id); - - while (sfp_id != IXGBE_PHY_INIT_END_NL) { - if (sfp_id == sfp_type) { - (*list_offset)++; - hw->eeprom.ops.read(hw, *list_offset, data_offset); - if ((!*data_offset) || (*data_offset == 0xFFFF)) { - hw_dbg(hw, "SFP+ module not supported\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; - } else { - break; - } - } else { - (*list_offset) += 2; - if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) - return IXGBE_ERR_PHY; - } - } - - if (sfp_id == IXGBE_PHY_INIT_END_NL) { - hw_dbg(hw, "No matching SFP+ module found\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; - } - - return 0; -} - -/** - * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data) -{ - return hw->phy.ops.read_i2c_byte(hw, byte_offset, - IXGBE_I2C_EEPROM_DEV_ADDR, - eeprom_data); -} - -/** - * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to write - * @eeprom_data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 eeprom_data) -{ - return hw->phy.ops.write_i2c_byte(hw, byte_offset, - IXGBE_I2C_EEPROM_DEV_ADDR, - eeprom_data); -} - -/** - * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface at - * a specified device address. - **/ -s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) -{ - s32 status = 0; - u32 max_retry = 10; - u32 retry = 0; - u16 swfw_mask = 0; - bool nack = 1; - *data = 0; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - swfw_mask = IXGBE_GSSR_PHY1_SM; - else - swfw_mask = IXGBE_GSSR_PHY0_SM; - - do { - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) - != 0) { - status = IXGBE_ERR_SWFW_SYNC; - goto read_byte_out; - } - - ixgbe_i2c_start(hw); - - /* Device Address and write indication */ - status = ixgbe_clock_out_i2c_byte(hw, dev_addr); - if (status != 0) - goto fail; - - status = ixgbe_get_i2c_ack(hw); - if (status != 0) - goto fail; - - status = ixgbe_clock_out_i2c_byte(hw, byte_offset); - if (status != 0) - goto fail; - - status = ixgbe_get_i2c_ack(hw); - if (status != 0) - goto fail; - - ixgbe_i2c_start(hw); - - /* Device Address and read indication */ - status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1)); - if (status != 0) - goto fail; - - status = ixgbe_get_i2c_ack(hw); - if (status != 0) - goto fail; - - status = ixgbe_clock_in_i2c_byte(hw, data); - if (status != 0) - goto fail; - - status = ixgbe_clock_out_i2c_bit(hw, nack); - if (status != 0) - goto fail; - - ixgbe_i2c_stop(hw); - break; - -fail: - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msleep(100); - ixgbe_i2c_bus_clear(hw); - retry++; - if (retry < max_retry) - hw_dbg(hw, "I2C byte read error - Retrying.\n"); - else - hw_dbg(hw, "I2C byte read error.\n"); - - } while (retry < max_retry); - - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - -read_byte_out: - return status; -} - -/** - * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface at - * a specified device address. - **/ -s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) -{ - s32 status = 0; - u32 max_retry = 1; - u32 retry = 0; - u16 swfw_mask = 0; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - swfw_mask = IXGBE_GSSR_PHY1_SM; - else - swfw_mask = IXGBE_GSSR_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { - status = IXGBE_ERR_SWFW_SYNC; - goto write_byte_out; - } - - do { - ixgbe_i2c_start(hw); - - status = ixgbe_clock_out_i2c_byte(hw, dev_addr); - if (status != 0) - goto fail; - - status = ixgbe_get_i2c_ack(hw); - if (status != 0) - goto fail; - - status = ixgbe_clock_out_i2c_byte(hw, byte_offset); - if (status != 0) - goto fail; - - status = ixgbe_get_i2c_ack(hw); - if (status != 0) - goto fail; - - status = ixgbe_clock_out_i2c_byte(hw, data); - if (status != 0) - goto fail; - - status = ixgbe_get_i2c_ack(hw); - if (status != 0) - goto fail; - - ixgbe_i2c_stop(hw); - break; - -fail: - ixgbe_i2c_bus_clear(hw); - retry++; - if (retry < max_retry) - hw_dbg(hw, "I2C byte write error - Retrying.\n"); - else - hw_dbg(hw, "I2C byte write error.\n"); - } while (retry < max_retry); - - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - -write_byte_out: - return status; -} - -/** - * ixgbe_i2c_start - Sets I2C start condition - * @hw: pointer to hardware structure - * - * Sets I2C start condition (High -> Low on SDA while SCL is High) - **/ -static void ixgbe_i2c_start(struct ixgbe_hw *hw) -{ - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - - /* Start condition must begin with data and clock high */ - ixgbe_set_i2c_data(hw, &i2cctl, 1); - ixgbe_raise_i2c_clk(hw, &i2cctl); - - /* Setup time for start condition (4.7us) */ - udelay(IXGBE_I2C_T_SU_STA); - - ixgbe_set_i2c_data(hw, &i2cctl, 0); - - /* Hold time for start condition (4us) */ - udelay(IXGBE_I2C_T_HD_STA); - - ixgbe_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - udelay(IXGBE_I2C_T_LOW); - -} - -/** - * ixgbe_i2c_stop - Sets I2C stop condition - * @hw: pointer to hardware structure - * - * Sets I2C stop condition (Low -> High on SDA while SCL is High) - **/ -static void ixgbe_i2c_stop(struct ixgbe_hw *hw) -{ - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - - /* Stop condition must begin with data low and clock high */ - ixgbe_set_i2c_data(hw, &i2cctl, 0); - ixgbe_raise_i2c_clk(hw, &i2cctl); - - /* Setup time for stop condition (4us) */ - udelay(IXGBE_I2C_T_SU_STO); - - ixgbe_set_i2c_data(hw, &i2cctl, 1); - - /* bus free time between stop and start (4.7us)*/ - udelay(IXGBE_I2C_T_BUF); -} - -/** - * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte to clock in - * - * Clocks in one byte data via I2C data/clock - **/ -static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) -{ - s32 i; - bool bit = 0; - - for (i = 7; i >= 0; i--) { - ixgbe_clock_in_i2c_bit(hw, &bit); - *data |= bit << i; - } - - return 0; -} - -/** - * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte clocked out - * - * Clocks out one byte data via I2C data/clock - **/ -static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) -{ - s32 status = 0; - s32 i; - u32 i2cctl; - bool bit = 0; - - for (i = 7; i >= 0; i--) { - bit = (data >> i) & 0x1; - status = ixgbe_clock_out_i2c_bit(hw, bit); - - if (status != 0) - break; - } - - /* Release SDA line (set high) */ - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - i2cctl |= IXGBE_I2C_DATA_OUT; - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl); - IXGBE_WRITE_FLUSH(hw); - - return status; -} - -/** - * ixgbe_get_i2c_ack - Polls for I2C ACK - * @hw: pointer to hardware structure - * - * Clocks in/out one bit via I2C data/clock - **/ -static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) -{ - s32 status = 0; - u32 i = 0; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - u32 timeout = 10; - bool ack = 1; - - ixgbe_raise_i2c_clk(hw, &i2cctl); - - - /* Minimum high period of clock is 4us */ - udelay(IXGBE_I2C_T_HIGH); - - /* Poll for ACK. Note that ACK in I2C spec is - * transition from 1 to 0 */ - for (i = 0; i < timeout; i++) { - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - ack = ixgbe_get_i2c_data(&i2cctl); - - udelay(1); - if (ack == 0) - break; - } - - if (ack == 1) { - hw_dbg(hw, "I2C ack was not received.\n"); - status = IXGBE_ERR_I2C; - } - - ixgbe_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - udelay(IXGBE_I2C_T_LOW); - - return status; -} - -/** - * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: read data value - * - * Clocks in one bit via I2C data/clock - **/ -static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) -{ - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - - ixgbe_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - udelay(IXGBE_I2C_T_HIGH); - - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - *data = ixgbe_get_i2c_data(&i2cctl); - - ixgbe_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - udelay(IXGBE_I2C_T_LOW); - - return 0; -} - -/** - * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: data value to write - * - * Clocks out one bit via I2C data/clock - **/ -static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) -{ - s32 status; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - - status = ixgbe_set_i2c_data(hw, &i2cctl, data); - if (status == 0) { - ixgbe_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - udelay(IXGBE_I2C_T_HIGH); - - ixgbe_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us. - * This also takes care of the data hold time. - */ - udelay(IXGBE_I2C_T_LOW); - } else { - status = IXGBE_ERR_I2C; - hw_dbg(hw, "I2C data was not set to %X\n", data); - } - - return status; -} -/** - * ixgbe_raise_i2c_clk - Raises the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Raises the I2C clock line '0'->'1' - **/ -static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) -{ - u32 i = 0; - u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT; - u32 i2cctl_r = 0; - - for (i = 0; i < timeout; i++) { - *i2cctl |= IXGBE_I2C_CLK_OUT; - - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); - IXGBE_WRITE_FLUSH(hw); - /* SCL rise time (1000ns) */ - udelay(IXGBE_I2C_T_RISE); - - i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - if (i2cctl_r & IXGBE_I2C_CLK_IN) - break; - } -} - -/** - * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Lowers the I2C clock line '1'->'0' - **/ -static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) -{ - - *i2cctl &= ~IXGBE_I2C_CLK_OUT; - - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); - IXGBE_WRITE_FLUSH(hw); - - /* SCL fall time (300ns) */ - udelay(IXGBE_I2C_T_FALL); -} - -/** - * ixgbe_set_i2c_data - Sets the I2C data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * @data: I2C data value (0 or 1) to set - * - * Sets the I2C data bit - **/ -static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) -{ - s32 status = 0; - - if (data) - *i2cctl |= IXGBE_I2C_DATA_OUT; - else - *i2cctl &= ~IXGBE_I2C_DATA_OUT; - - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); - IXGBE_WRITE_FLUSH(hw); - - /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ - udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); - - /* Verify data was set correctly */ - *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - if (data != ixgbe_get_i2c_data(i2cctl)) { - status = IXGBE_ERR_I2C; - hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); - } - - return status; -} - -/** - * ixgbe_get_i2c_data - Reads the I2C SDA data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Returns the I2C data bit value - **/ -static bool ixgbe_get_i2c_data(u32 *i2cctl) -{ - bool data; - - if (*i2cctl & IXGBE_I2C_DATA_IN) - data = 1; - else - data = 0; - - return data; -} - -/** - * ixgbe_i2c_bus_clear - Clears the I2C bus - * @hw: pointer to hardware structure - * - * Clears the I2C bus by sending nine clock pulses. - * Used when data line is stuck low. - **/ -void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) -{ - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - u32 i; - - ixgbe_i2c_start(hw); - - ixgbe_set_i2c_data(hw, &i2cctl, 1); - - for (i = 0; i < 9; i++) { - ixgbe_raise_i2c_clk(hw, &i2cctl); - - /* Min high period of clock is 4us */ - udelay(IXGBE_I2C_T_HIGH); - - ixgbe_lower_i2c_clk(hw, &i2cctl); - - /* Min low period of clock is 4.7us*/ - udelay(IXGBE_I2C_T_LOW); - } - - ixgbe_i2c_start(hw); - - /* Put the i2c bus back to default state */ - ixgbe_i2c_stop(hw); -} - -/** - * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. - * @hw: pointer to hardware structure - * - * Checks if the LASI temp alarm status was triggered due to overtemp - **/ -s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) -{ - s32 status = 0; - u16 phy_data = 0; - - if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) - goto out; - - /* Check that the LASI temp alarm status was triggered */ - hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data); - - if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) - goto out; - - status = IXGBE_ERR_OVERTEMP; -out: - return status; -} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h deleted file mode 100644 index 6baa9acbf1..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h +++ /dev/null @@ -1,122 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_PHY_H_ -#define _IXGBE_PHY_H_ - -#include "ixgbe_type.h" -#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 - -/* EEPROM byte offsets */ -#define IXGBE_SFF_IDENTIFIER 0x0 -#define IXGBE_SFF_IDENTIFIER_SFP 0x3 -#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25 -#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26 -#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27 -#define IXGBE_SFF_1GBE_COMP_CODES 0x6 -#define IXGBE_SFF_10GBE_COMP_CODES 0x3 -#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 -#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C - -/* Bitmasks */ -#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 -#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8 -#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4 -#define IXGBE_SFF_1GBASESX_CAPABLE 0x1 -#define IXGBE_SFF_1GBASELX_CAPABLE 0x2 -#define IXGBE_SFF_1GBASET_CAPABLE 0x8 -#define IXGBE_SFF_10GBASESR_CAPABLE 0x10 -#define IXGBE_SFF_10GBASELR_CAPABLE 0x20 -#define IXGBE_I2C_EEPROM_READ_MASK 0x100 -#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 -#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 -#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1 -#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 -#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 - -/* Flow control defines */ -#define IXGBE_TAF_SYM_PAUSE 0x400 -#define IXGBE_TAF_ASM_PAUSE 0x800 - -/* Bit-shift macros */ -#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24 -#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16 -#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8 - -/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ -#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600 -#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500 -#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00 -#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100 - -/* I2C SDA and SCL timing parameters for standard mode */ -#define IXGBE_I2C_T_HD_STA 4 -#define IXGBE_I2C_T_LOW 5 -#define IXGBE_I2C_T_HIGH 4 -#define IXGBE_I2C_T_SU_STA 5 -#define IXGBE_I2C_T_HD_DATA 5 -#define IXGBE_I2C_T_SU_DATA 1 -#define IXGBE_I2C_T_RISE 1 -#define IXGBE_I2C_T_FALL 1 -#define IXGBE_I2C_T_SU_STO 4 -#define IXGBE_I2C_T_BUF 5 - -#define IXGBE_TN_LASI_STATUS_REG 0x9005 -#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 - -s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); -bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr); -enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); -s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); -s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); -s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); -s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 *phy_data); -s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 phy_data); -s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); -s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); -s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg); - -/* PHY specific */ -s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *link_up); -s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw); -s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, - u16 *firmware_version); -s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, - u16 *firmware_version); - -s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); -s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw); -s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); -s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); -s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, - u16 *list_offset, - u16 *data_offset); -s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw); -s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data); -s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data); -s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data); -s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 eeprom_data); -void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); -#endif /* _IXGBE_PHY_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h deleted file mode 100644 index 0689590e25..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h +++ /dev/null @@ -1,3239 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_TYPE_H_ -#define _IXGBE_TYPE_H_ - -#include "ixgbe_osdep.h" - - -/* Vendor ID */ -#define IXGBE_INTEL_VENDOR_ID 0x8086 - -/* Device IDs */ -#define IXGBE_DEV_ID_82598 0x10B6 -#define IXGBE_DEV_ID_82598_BX 0x1508 -#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6 -#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7 -#define IXGBE_DEV_ID_82598AT 0x10C8 -#define IXGBE_DEV_ID_82598AT2 0x150B -#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB -#define IXGBE_DEV_ID_82598EB_CX4 0x10DD -#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC -#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1 -#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1 -#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4 -#define IXGBE_DEV_ID_82599_KX4 0x10F7 -#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514 -#define IXGBE_DEV_ID_82599_KR 0x1517 -#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8 -#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C -#define IXGBE_DEV_ID_82599_CX4 0x10F9 -#define IXGBE_DEV_ID_82599_SFP 0x10FB -#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9 -#define IXGBE_SUBDEV_ID_82599_560FLR 0x17D0 -#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE 0x152A -#define IXGBE_DEV_ID_82599_SFP_FCOE 0x1529 -#define IXGBE_DEV_ID_82599_SFP_EM 0x1507 -#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D -#define IXGBE_DEV_ID_82599_QSFP_SF_QP 0x1558 -#define IXGBE_DEV_ID_82599EN_SFP 0x1557 -#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC -#define IXGBE_DEV_ID_82599_T3_LOM 0x151C -#define IXGBE_DEV_ID_82599_LS 0x154F -#define IXGBE_DEV_ID_X540T 0x1528 - -/* General Registers */ -#define IXGBE_CTRL 0x00000 -#define IXGBE_STATUS 0x00008 -#define IXGBE_CTRL_EXT 0x00018 -#define IXGBE_ESDP 0x00020 -#define IXGBE_EODSDP 0x00028 -#define IXGBE_I2CCTL 0x00028 -#define IXGBE_PHY_GPIO 0x00028 -#define IXGBE_MAC_GPIO 0x00030 -#define IXGBE_PHYINT_STATUS0 0x00100 -#define IXGBE_PHYINT_STATUS1 0x00104 -#define IXGBE_PHYINT_STATUS2 0x00108 -#define IXGBE_LEDCTL 0x00200 -#define IXGBE_FRTIMER 0x00048 -#define IXGBE_TCPTIMER 0x0004C -#define IXGBE_CORESPARE 0x00600 -#define IXGBE_EXVET 0x05078 - -/* NVM Registers */ -#define IXGBE_EEC 0x10010 -#define IXGBE_EERD 0x10014 -#define IXGBE_EEWR 0x10018 -#define IXGBE_FLA 0x1001C -#define IXGBE_EEMNGCTL 0x10110 -#define IXGBE_EEMNGDATA 0x10114 -#define IXGBE_FLMNGCTL 0x10118 -#define IXGBE_FLMNGDATA 0x1011C -#define IXGBE_FLMNGCNT 0x10120 -#define IXGBE_FLOP 0x1013C -#define IXGBE_GRC 0x10200 -#define IXGBE_SRAMREL 0x10210 -#define IXGBE_PHYDBG 0x10218 - -/* General Receive Control */ -#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */ -#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */ - -#define IXGBE_VPDDIAG0 0x10204 -#define IXGBE_VPDDIAG1 0x10208 - -/* I2CCTL Bit Masks */ -#define IXGBE_I2C_CLK_IN 0x00000001 -#define IXGBE_I2C_CLK_OUT 0x00000002 -#define IXGBE_I2C_DATA_IN 0x00000004 -#define IXGBE_I2C_DATA_OUT 0x00000008 -#define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT 500 - -#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8 -#define IXGBE_EMC_INTERNAL_DATA 0x00 -#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20 -#define IXGBE_EMC_DIODE1_DATA 0x01 -#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19 -#define IXGBE_EMC_DIODE2_DATA 0x23 -#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A - -#define IXGBE_MAX_SENSORS 3 - -struct ixgbe_thermal_diode_data { - u8 location; - u8 temp; - u8 caution_thresh; - u8 max_op_thresh; -}; - -struct ixgbe_thermal_sensor_data { - struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS]; -}; - -/* Interrupt Registers */ -#define IXGBE_EICR 0x00800 -#define IXGBE_EICS 0x00808 -#define IXGBE_EIMS 0x00880 -#define IXGBE_EIMC 0x00888 -#define IXGBE_EIAC 0x00810 -#define IXGBE_EIAM 0x00890 -#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4) -#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4) -#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4) -#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4) -/* 82599 EITR is only 12 bits, with the lower 3 always zero */ -/* - * 82598 EITR is 16 bits but set the limits based on the max - * supported by all ixgbe hardware - */ -#define IXGBE_MAX_INT_RATE 488281 -#define IXGBE_MIN_INT_RATE 956 -#define IXGBE_MAX_EITR 0x00000FF8 -#define IXGBE_MIN_EITR 8 -#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \ - (0x012300 + (((_i) - 24) * 4))) -#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8 -#define IXGBE_EITR_LLI_MOD 0x00008000 -#define IXGBE_EITR_CNT_WDIS 0x80000000 -#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */ -#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */ -#define IXGBE_EITRSEL 0x00894 -#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */ -#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */ -#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4))) -#define IXGBE_GPIE 0x00898 - -/* Flow Control Registers */ -#define IXGBE_FCADBUL 0x03210 -#define IXGBE_FCADBUH 0x03214 -#define IXGBE_FCAMACL 0x04328 -#define IXGBE_FCAMACH 0x0432C -#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_PFCTOP 0x03008 -#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */ -#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */ -#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */ -#define IXGBE_FCRTV 0x032A0 -#define IXGBE_FCCFG 0x03D00 -#define IXGBE_TFCS 0x0CE00 - -/* Receive DMA Registers */ -#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \ - (0x0D000 + (((_i) - 64) * 0x40))) -#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \ - (0x0D004 + (((_i) - 64) * 0x40))) -#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \ - (0x0D008 + (((_i) - 64) * 0x40))) -#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \ - (0x0D010 + (((_i) - 64) * 0x40))) -#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \ - (0x0D018 + (((_i) - 64) * 0x40))) -#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \ - (0x0D028 + (((_i) - 64) * 0x40))) -#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \ - (0x0D02C + (((_i) - 64) * 0x40))) -#define IXGBE_RSCDBU 0x03028 -#define IXGBE_RDDCC 0x02F20 -#define IXGBE_RXMEMWRAP 0x03190 -#define IXGBE_STARCTRL 0x03024 -/* - * Split and Replication Receive Control Registers - * 00-15 : 0x02100 + n*4 - * 16-64 : 0x01014 + n*0x40 - * 64-127: 0x0D014 + (n-64)*0x40 - */ -#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \ - (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \ - (0x0D014 + (((_i) - 64) * 0x40)))) -/* - * Rx DCA Control Register: - * 00-15 : 0x02200 + n*4 - * 16-64 : 0x0100C + n*0x40 - * 64-127: 0x0D00C + (n-64)*0x40 - */ -#define IXGBE_DCA_RXCTRL(_i) (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \ - (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \ - (0x0D00C + (((_i) - 64) * 0x40)))) -#define IXGBE_RDRXCTL 0x02F00 -#define IXGBE_RDRXCTL_RSC_PUSH 0x80 -/* 8 of these 0x03C00 - 0x03C1C */ -#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4)) -#define IXGBE_RXCTRL 0x03000 -#define IXGBE_DROPEN 0x03D04 -#define IXGBE_RXPBSIZE_SHIFT 10 - -/* Receive Registers */ -#define IXGBE_RXCSUM 0x05000 -#define IXGBE_RFCTL 0x05008 -#define IXGBE_DRECCCTL 0x02F08 -#define IXGBE_DRECCCTL_DISABLE 0 -#define IXGBE_DRECCCTL2 0x02F8C - -/* Multicast Table Array - 128 entries */ -#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4)) -#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ - (0x0A200 + ((_i) * 8))) -#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ - (0x0A204 + ((_i) * 8))) -#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8)) -#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8)) -/* Packet split receive type */ -#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \ - (0x0EA00 + ((_i) * 4))) -/* array of 4096 1-bit vlan filters */ -#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4)) -/*array of 4096 4-bit vlan vmdq indices */ -#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4)) -#define IXGBE_FCTRL 0x05080 -#define IXGBE_VLNCTRL 0x05088 -#define IXGBE_MCSTCTRL 0x05090 -#define IXGBE_MRQC 0x05818 -#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */ -#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */ -#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */ -#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */ -#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */ -#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */ -#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */ -#define IXGBE_RQTC 0x0EC70 -#define IXGBE_MTQC 0x08120 -#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */ -#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */ -#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4)) /* 64 of these (0-63) */ -#define IXGBE_VT_CTL 0x051B0 -#define IXGBE_PFMAILBOX(_i) (0x04B00 + (4 * (_i))) /* 64 total */ -/* 64 Mailboxes, 16 DW each */ -#define IXGBE_PFMBMEM(_i) (0x13000 + (64 * (_i))) -#define IXGBE_PFMBICR(_i) (0x00710 + (4 * (_i))) /* 4 total */ -#define IXGBE_PFMBIMR(_i) (0x00720 + (4 * (_i))) /* 4 total */ -#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4)) -#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4)) -#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4)) -#define IXGBE_QDE 0x2F04 -#define IXGBE_VMTXSW(_i) (0x05180 + ((_i) * 4)) /* 2 total */ -#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */ -#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4)) -#define IXGBE_MRCTL(_i) (0x0F600 + ((_i) * 4)) -#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4)) -#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4)) -#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/ -#define IXGBE_RXFECCERR0 0x051B8 -#define IXGBE_LLITHRESH 0x0EC90 -#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_IMIRVP 0x05AC0 -#define IXGBE_VMD_CTL 0x0581C -#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */ -#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */ - -/* Flow Director registers */ -#define IXGBE_FDIRCTRL 0x0EE00 -#define IXGBE_FDIRHKEY 0x0EE68 -#define IXGBE_FDIRSKEY 0x0EE6C -#define IXGBE_FDIRDIP4M 0x0EE3C -#define IXGBE_FDIRSIP4M 0x0EE40 -#define IXGBE_FDIRTCPM 0x0EE44 -#define IXGBE_FDIRUDPM 0x0EE48 -#define IXGBE_FDIRIP6M 0x0EE74 -#define IXGBE_FDIRM 0x0EE70 - -/* Flow Director Stats registers */ -#define IXGBE_FDIRFREE 0x0EE38 -#define IXGBE_FDIRLEN 0x0EE4C -#define IXGBE_FDIRUSTAT 0x0EE50 -#define IXGBE_FDIRFSTAT 0x0EE54 -#define IXGBE_FDIRMATCH 0x0EE58 -#define IXGBE_FDIRMISS 0x0EE5C - -/* Flow Director Programming registers */ -#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */ -#define IXGBE_FDIRIPSA 0x0EE18 -#define IXGBE_FDIRIPDA 0x0EE1C -#define IXGBE_FDIRPORT 0x0EE20 -#define IXGBE_FDIRVLAN 0x0EE24 -#define IXGBE_FDIRHASH 0x0EE28 -#define IXGBE_FDIRCMD 0x0EE2C - -/* Transmit DMA registers */ -#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of them (0-31)*/ -#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40)) -#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40)) -#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40)) -#define IXGBE_TDT(_i) (0x06018 + ((_i) * 0x40)) -#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40)) -#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40)) -#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40)) -#define IXGBE_DTXCTL 0x07E00 - -#define IXGBE_DMATXCTL 0x04A80 -#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */ -#define IXGBE_PFDTXGSWC 0x08220 -#define IXGBE_DTXMXSZRQ 0x08100 -#define IXGBE_DTXTCPFLGL 0x04A88 -#define IXGBE_DTXTCPFLGH 0x04A8C -#define IXGBE_LBDRPEN 0x0CA00 -#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */ - -#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */ -#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */ -#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */ -#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */ - -#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */ - -/* Anti-spoofing defines */ -#define IXGBE_SPOOF_MACAS_MASK 0xFF -#define IXGBE_SPOOF_VLANAS_MASK 0xFF00 -#define IXGBE_SPOOF_VLANAS_SHIFT 8 -#define IXGBE_PFVFSPOOF_REG_COUNT 8 -/* 16 of these (0-15) */ -#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) -/* Tx DCA Control register : 128 of these (0-127) */ -#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40)) -#define IXGBE_TIPG 0x0CB00 -#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */ -#define IXGBE_MNGTXMAP 0x0CD10 -#define IXGBE_TIPG_FIBER_DEFAULT 3 -#define IXGBE_TXPBSIZE_SHIFT 10 - -/* Wake up registers */ -#define IXGBE_WUC 0x05800 -#define IXGBE_WUFC 0x05808 -#define IXGBE_WUS 0x05810 -#define IXGBE_IPAV 0x05838 -#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */ -#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */ - -#define IXGBE_WUPL 0x05900 -#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */ -#define IXGBE_FHFT(_n) (0x09000 + (_n * 0x100)) /* Flex host filter table */ -/* Ext Flexible Host Filter Table */ -#define IXGBE_FHFT_EXT(_n) (0x09800 + (_n * 0x100)) - -#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4 -#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2 - -/* Each Flexible Filter is at most 128 (0x80) bytes in length */ -#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128 -#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */ -#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */ - -/* Definitions for power management and wakeup registers */ -/* Wake Up Control */ -#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */ -#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */ -#define IXGBE_WUC_WKEN 0x00000010 /* Enable PE_WAKE_N pin assertion */ - -/* Wake Up Filter Control */ -#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ -#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ -#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ -#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ -#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ -#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ -#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ -#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ -#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */ - -#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ -#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ -#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ -#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ -#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ -#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */ -#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */ -#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */ -/* Mask for Ext. flex filters */ -#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 -#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all wakeup filters */ -#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ - -/* Wake Up Status */ -#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC -#define IXGBE_WUS_MAG IXGBE_WUFC_MAG -#define IXGBE_WUS_EX IXGBE_WUFC_EX -#define IXGBE_WUS_MC IXGBE_WUFC_MC -#define IXGBE_WUS_BC IXGBE_WUFC_BC -#define IXGBE_WUS_ARP IXGBE_WUFC_ARP -#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4 -#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6 -#define IXGBE_WUS_MNG IXGBE_WUFC_MNG -#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0 -#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1 -#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2 -#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3 -#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4 -#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5 -#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS - -/* Wake Up Packet Length */ -#define IXGBE_WUPL_LENGTH_MASK 0xFFFF - -/* DCB registers */ -#define IXGBE_DCB_MAX_TRAFFIC_CLASS 8 -#define IXGBE_RMCS 0x03D00 -#define IXGBE_DPMCS 0x07F40 -#define IXGBE_PDPMCS 0x0CD00 -#define IXGBE_RUPPBMR 0x050A0 -#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_TDTQ2TCCR(_i) (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */ -#define IXGBE_TDTQ2TCSR(_i) (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */ -#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ - - -/* Security Control Registers */ -#define IXGBE_SECTXCTRL 0x08800 -#define IXGBE_SECTXSTAT 0x08804 -#define IXGBE_SECTXBUFFAF 0x08808 -#define IXGBE_SECTXMINIFG 0x08810 -#define IXGBE_SECRXCTRL 0x08D00 -#define IXGBE_SECRXSTAT 0x08D04 - -/* Security Bit Fields and Masks */ -#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001 -#define IXGBE_SECTXCTRL_TX_DIS 0x00000002 -#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004 - -#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001 -#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002 - -#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001 -#define IXGBE_SECRXCTRL_RX_DIS 0x00000002 - -#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001 -#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002 - -/* LinkSec (MacSec) Registers */ -#define IXGBE_LSECTXCAP 0x08A00 -#define IXGBE_LSECRXCAP 0x08F00 -#define IXGBE_LSECTXCTRL 0x08A04 -#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */ -#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */ -#define IXGBE_LSECTXSA 0x08A10 -#define IXGBE_LSECTXPN0 0x08A14 -#define IXGBE_LSECTXPN1 0x08A18 -#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */ -#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */ -#define IXGBE_LSECRXCTRL 0x08F04 -#define IXGBE_LSECRXSCL 0x08F08 -#define IXGBE_LSECRXSCH 0x08F0C -#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */ -#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */ -#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m)))) -#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */ -#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */ -#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */ -#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */ -#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */ -#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */ -#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */ -#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */ -#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */ -#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */ -#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */ -#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */ -#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */ -#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */ -#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */ -#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */ -#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */ -#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */ -#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */ - -/* LinkSec (MacSec) Bit Fields and Masks */ -#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000 -#define IXGBE_LSECTXCAP_SUM_SHIFT 16 -#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000 -#define IXGBE_LSECRXCAP_SUM_SHIFT 16 - -#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003 -#define IXGBE_LSECTXCTRL_DISABLE 0x0 -#define IXGBE_LSECTXCTRL_AUTH 0x1 -#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2 -#define IXGBE_LSECTXCTRL_AISCI 0x00000020 -#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 -#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8 - -#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C -#define IXGBE_LSECRXCTRL_EN_SHIFT 2 -#define IXGBE_LSECRXCTRL_DISABLE 0x0 -#define IXGBE_LSECRXCTRL_CHECK 0x1 -#define IXGBE_LSECRXCTRL_STRICT 0x2 -#define IXGBE_LSECRXCTRL_DROP 0x3 -#define IXGBE_LSECRXCTRL_PLSH 0x00000040 -#define IXGBE_LSECRXCTRL_RP 0x00000080 -#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33 - -/* IpSec Registers */ -#define IXGBE_IPSTXIDX 0x08900 -#define IXGBE_IPSTXSALT 0x08904 -#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */ -#define IXGBE_IPSRXIDX 0x08E00 -#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */ -#define IXGBE_IPSRXSPI 0x08E14 -#define IXGBE_IPSRXIPIDX 0x08E18 -#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */ -#define IXGBE_IPSRXSALT 0x08E2C -#define IXGBE_IPSRXMOD 0x08E30 - -#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4 - -/* DCB registers */ -#define IXGBE_RTRPCS 0x02430 -#define IXGBE_RTTDCS 0x04900 -#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */ -#define IXGBE_RTTPCS 0x0CD00 -#define IXGBE_RTRUP2TC 0x03020 -#define IXGBE_RTTUP2TC 0x0C800 -#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_TXLLQ(_i) (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */ -#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_RTTDQSEL 0x04904 -#define IXGBE_RTTDT1C 0x04908 -#define IXGBE_RTTDT1S 0x0490C -#define IXGBE_RTTDTECC 0x04990 -#define IXGBE_RTTDTECC_NO_BCN 0x00000100 - -#define IXGBE_RTTBCNRC 0x04984 -#define IXGBE_RTTBCNRC_RS_ENA 0x80000000 -#define IXGBE_RTTBCNRC_RF_DEC_MASK 0x00003FFF -#define IXGBE_RTTBCNRC_RF_INT_SHIFT 14 -#define IXGBE_RTTBCNRC_RF_INT_MASK \ - (IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT) -#define IXGBE_RTTBCNRM 0x04980 - -/* FCoE DMA Context Registers */ -#define IXGBE_FCPTRL 0x02410 /* FC User Desc. PTR Low */ -#define IXGBE_FCPTRH 0x02414 /* FC USer Desc. PTR High */ -#define IXGBE_FCBUFF 0x02418 /* FC Buffer Control */ -#define IXGBE_FCDMARW 0x02420 /* FC Receive DMA RW */ -#define IXGBE_FCINVST0 0x03FC0 /* FC Invalid DMA Context Status Reg 0*/ -#define IXGBE_FCINVST(_i) (IXGBE_FCINVST0 + ((_i) * 4)) -#define IXGBE_FCBUFF_VALID (1 << 0) /* DMA Context Valid */ -#define IXGBE_FCBUFF_BUFFSIZE (3 << 3) /* User Buffer Size */ -#define IXGBE_FCBUFF_WRCONTX (1 << 7) /* 0: Initiator, 1: Target */ -#define IXGBE_FCBUFF_BUFFCNT 0x0000ff00 /* Number of User Buffers */ -#define IXGBE_FCBUFF_OFFSET 0xffff0000 /* User Buffer Offset */ -#define IXGBE_FCBUFF_BUFFSIZE_SHIFT 3 -#define IXGBE_FCBUFF_BUFFCNT_SHIFT 8 -#define IXGBE_FCBUFF_OFFSET_SHIFT 16 -#define IXGBE_FCDMARW_WE (1 << 14) /* Write enable */ -#define IXGBE_FCDMARW_RE (1 << 15) /* Read enable */ -#define IXGBE_FCDMARW_FCOESEL 0x000001ff /* FC X_ID: 11 bits */ -#define IXGBE_FCDMARW_LASTSIZE 0xffff0000 /* Last User Buffer Size */ -#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16 -/* FCoE SOF/EOF */ -#define IXGBE_TEOFF 0x04A94 /* Tx FC EOF */ -#define IXGBE_TSOFF 0x04A98 /* Tx FC SOF */ -#define IXGBE_REOFF 0x05158 /* Rx FC EOF */ -#define IXGBE_RSOFF 0x051F8 /* Rx FC SOF */ -/* FCoE Filter Context Registers */ -#define IXGBE_FCFLT 0x05108 /* FC FLT Context */ -#define IXGBE_FCFLTRW 0x05110 /* FC Filter RW Control */ -#define IXGBE_FCPARAM 0x051d8 /* FC Offset Parameter */ -#define IXGBE_FCFLT_VALID (1 << 0) /* Filter Context Valid */ -#define IXGBE_FCFLT_FIRST (1 << 1) /* Filter First */ -#define IXGBE_FCFLT_SEQID 0x00ff0000 /* Sequence ID */ -#define IXGBE_FCFLT_SEQCNT 0xff000000 /* Sequence Count */ -#define IXGBE_FCFLTRW_RVALDT (1 << 13) /* Fast Re-Validation */ -#define IXGBE_FCFLTRW_WE (1 << 14) /* Write Enable */ -#define IXGBE_FCFLTRW_RE (1 << 15) /* Read Enable */ -/* FCoE Receive Control */ -#define IXGBE_FCRXCTRL 0x05100 /* FC Receive Control */ -#define IXGBE_FCRXCTRL_FCOELLI (1 << 0) /* Low latency interrupt */ -#define IXGBE_FCRXCTRL_SAVBAD (1 << 1) /* Save Bad Frames */ -#define IXGBE_FCRXCTRL_FRSTRDH (1 << 2) /* EN 1st Read Header */ -#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3) /* EN Last Header in Seq */ -#define IXGBE_FCRXCTRL_ALLH (1 << 4) /* EN All Headers */ -#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5) /* EN 1st Seq. Header */ -#define IXGBE_FCRXCTRL_ICRC (1 << 6) /* Ignore Bad FC CRC */ -#define IXGBE_FCRXCTRL_FCCRCBO (1 << 7) /* FC CRC Byte Ordering */ -#define IXGBE_FCRXCTRL_FCOEVER 0x00000f00 /* FCoE Version: 4 bits */ -#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8 -/* FCoE Redirection */ -#define IXGBE_FCRECTL 0x0ED00 /* FC Redirection Control */ -#define IXGBE_FCRETA0 0x0ED10 /* FC Redirection Table 0 */ -#define IXGBE_FCRETA(_i) (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */ -#define IXGBE_FCRECTL_ENA 0x1 /* FCoE Redir Table Enable */ -#define IXGBE_FCRETASEL_ENA 0x2 /* FCoE FCRETASEL bit */ -#define IXGBE_FCRETA_SIZE 8 /* Max entries in FCRETA */ -#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */ - -/* Stats registers */ -#define IXGBE_CRCERRS 0x04000 -#define IXGBE_ILLERRC 0x04004 -#define IXGBE_ERRBC 0x04008 -#define IXGBE_MSPDC 0x04010 -#define IXGBE_MPC(_i) (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/ -#define IXGBE_MLFC 0x04034 -#define IXGBE_MRFC 0x04038 -#define IXGBE_RLEC 0x04040 -#define IXGBE_LXONTXC 0x03F60 -#define IXGBE_LXONRXC 0x0CF60 -#define IXGBE_LXOFFTXC 0x03F68 -#define IXGBE_LXOFFRXC 0x0CF68 -#define IXGBE_LXONRXCNT 0x041A4 -#define IXGBE_LXOFFRXCNT 0x041A8 -#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */ -#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */ -#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */ -#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/ -#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/ -#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/ -#define IXGBE_PXOFFRXC(_i) (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/ -#define IXGBE_PRC64 0x0405C -#define IXGBE_PRC127 0x04060 -#define IXGBE_PRC255 0x04064 -#define IXGBE_PRC511 0x04068 -#define IXGBE_PRC1023 0x0406C -#define IXGBE_PRC1522 0x04070 -#define IXGBE_GPRC 0x04074 -#define IXGBE_BPRC 0x04078 -#define IXGBE_MPRC 0x0407C -#define IXGBE_GPTC 0x04080 -#define IXGBE_GORCL 0x04088 -#define IXGBE_GORCH 0x0408C -#define IXGBE_GOTCL 0x04090 -#define IXGBE_GOTCH 0x04094 -#define IXGBE_RNBC(_i) (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/ -#define IXGBE_RUC 0x040A4 -#define IXGBE_RFC 0x040A8 -#define IXGBE_ROC 0x040AC -#define IXGBE_RJC 0x040B0 -#define IXGBE_MNGPRC 0x040B4 -#define IXGBE_MNGPDC 0x040B8 -#define IXGBE_MNGPTC 0x0CF90 -#define IXGBE_TORL 0x040C0 -#define IXGBE_TORH 0x040C4 -#define IXGBE_TPR 0x040D0 -#define IXGBE_TPT 0x040D4 -#define IXGBE_PTC64 0x040D8 -#define IXGBE_PTC127 0x040DC -#define IXGBE_PTC255 0x040E0 -#define IXGBE_PTC511 0x040E4 -#define IXGBE_PTC1023 0x040E8 -#define IXGBE_PTC1522 0x040EC -#define IXGBE_MPTC 0x040F0 -#define IXGBE_BPTC 0x040F4 -#define IXGBE_XEC 0x04120 -#define IXGBE_SSVPC 0x08780 - -#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) -#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \ - (0x08600 + ((_i) * 4))) -#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4)) - -#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */ -#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */ -#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ -#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */ -#define IXGBE_QBRC_L(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ -#define IXGBE_QBRC_H(_i) (0x01038 + ((_i) * 0x40)) /* 16 of these */ -#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */ -#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */ -#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */ -#define IXGBE_FCCRC 0x05118 /* Num of Good Eth CRC w/ Bad FC CRC */ -#define IXGBE_FCOERPDC 0x0241C /* FCoE Rx Packets Dropped Count */ -#define IXGBE_FCLAST 0x02424 /* FCoE Last Error Count */ -#define IXGBE_FCOEPRC 0x02428 /* Number of FCoE Packets Received */ -#define IXGBE_FCOEDWRC 0x0242C /* Number of FCoE DWords Received */ -#define IXGBE_FCOEPTC 0x08784 /* Number of FCoE Packets Transmitted */ -#define IXGBE_FCOEDWTC 0x08788 /* Number of FCoE DWords Transmitted */ -#define IXGBE_FCCRC_CNT_MASK 0x0000FFFF /* CRC_CNT: bit 0 - 15 */ -#define IXGBE_FCLAST_CNT_MASK 0x0000FFFF /* Last_CNT: bit 0 - 15 */ -#define IXGBE_O2BGPTC 0x041C4 -#define IXGBE_O2BSPC 0x087B0 -#define IXGBE_B2OSPC 0x041C0 -#define IXGBE_B2OGPRC 0x02F90 -#define IXGBE_BUPRC 0x04180 -#define IXGBE_BMPRC 0x04184 -#define IXGBE_BBPRC 0x04188 -#define IXGBE_BUPTC 0x0418C -#define IXGBE_BMPTC 0x04190 -#define IXGBE_BBPTC 0x04194 -#define IXGBE_BCRCERRS 0x04198 -#define IXGBE_BXONRXC 0x0419C -#define IXGBE_BXOFFRXC 0x041E0 -#define IXGBE_BXONTXC 0x041E4 -#define IXGBE_BXOFFTXC 0x041E8 -#define IXGBE_PCRC8ECL 0x0E810 -#define IXGBE_PCRC8ECH 0x0E811 -#define IXGBE_PCRC8ECH_MASK 0x1F -#define IXGBE_LDPCECL 0x0E820 -#define IXGBE_LDPCECH 0x0E821 - -/* Management */ -#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_MANC 0x05820 -#define IXGBE_MFVAL 0x05824 -#define IXGBE_MANC2H 0x05860 -#define IXGBE_MDEF(_i) (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_MIPAF 0x058B0 -#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */ -#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */ -#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */ -#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */ -#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */ -#define IXGBE_LSWFW 0x15014 -#define IXGBE_BMCIP(_i) (0x05050 + ((_i) * 4)) /* 0x5050-0x505C */ -#define IXGBE_BMCIPVAL 0x05060 -#define IXGBE_BMCIP_IPADDR_TYPE 0x00000001 -#define IXGBE_BMCIP_IPADDR_VALID 0x00000002 - -/* Management Bit Fields and Masks */ -#define IXGBE_MANC_EN_BMC2OS 0x10000000 /* Ena BMC2OS and OS2BMC traffic */ -#define IXGBE_MANC_EN_BMC2OS_SHIFT 28 - -/* Firmware Semaphore Register */ -#define IXGBE_FWSM_MODE_MASK 0xE - -/* ARC Subsystem registers */ -#define IXGBE_HICR 0x15F00 -#define IXGBE_FWSTS 0x15F0C -#define IXGBE_HSMC0R 0x15F04 -#define IXGBE_HSMC1R 0x15F08 -#define IXGBE_SWSR 0x15F10 -#define IXGBE_HFDR 0x15FE8 -#define IXGBE_FLEX_MNG 0x15800 /* 0x15800 - 0x15EFC */ - -#define IXGBE_HICR_EN 0x01 /* Enable bit - RO */ -/* Driver sets this bit when done to put command in RAM */ -#define IXGBE_HICR_C 0x02 -#define IXGBE_HICR_SV 0x04 /* Status Validity */ -#define IXGBE_HICR_FW_RESET_ENABLE 0x40 -#define IXGBE_HICR_FW_RESET 0x80 - -/* PCI-E registers */ -#define IXGBE_GCR 0x11000 -#define IXGBE_GTV 0x11004 -#define IXGBE_FUNCTAG 0x11008 -#define IXGBE_GLT 0x1100C -#define IXGBE_PCIEPIPEADR 0x11004 -#define IXGBE_PCIEPIPEDAT 0x11008 -#define IXGBE_GSCL_1 0x11010 -#define IXGBE_GSCL_2 0x11014 -#define IXGBE_GSCL_3 0x11018 -#define IXGBE_GSCL_4 0x1101C -#define IXGBE_GSCN_0 0x11020 -#define IXGBE_GSCN_1 0x11024 -#define IXGBE_GSCN_2 0x11028 -#define IXGBE_GSCN_3 0x1102C -#define IXGBE_FACTPS 0x10150 -#define IXGBE_PCIEANACTL 0x11040 -#define IXGBE_SWSM 0x10140 -#define IXGBE_FWSM 0x10148 -#define IXGBE_GSSR 0x10160 -#define IXGBE_MREVID 0x11064 -#define IXGBE_DCA_ID 0x11070 -#define IXGBE_DCA_CTRL 0x11074 -#define IXGBE_SWFW_SYNC IXGBE_GSSR - -/* PCI-E registers 82599-Specific */ -#define IXGBE_GCR_EXT 0x11050 -#define IXGBE_GSCL_5_82599 0x11030 -#define IXGBE_GSCL_6_82599 0x11034 -#define IXGBE_GSCL_7_82599 0x11038 -#define IXGBE_GSCL_8_82599 0x1103C -#define IXGBE_PHYADR_82599 0x11040 -#define IXGBE_PHYDAT_82599 0x11044 -#define IXGBE_PHYCTL_82599 0x11048 -#define IXGBE_PBACLR_82599 0x11068 -#define IXGBE_CIAA_82599 0x11088 -#define IXGBE_CIAD_82599 0x1108C -#define IXGBE_PICAUSE 0x110B0 -#define IXGBE_PIENA 0x110B8 -#define IXGBE_CDQ_MBR_82599 0x110B4 -#define IXGBE_PCIESPARE 0x110BC -#define IXGBE_MISC_REG_82599 0x110F0 -#define IXGBE_ECC_CTRL_0_82599 0x11100 -#define IXGBE_ECC_CTRL_1_82599 0x11104 -#define IXGBE_ECC_STATUS_82599 0x110E0 -#define IXGBE_BAR_CTRL_82599 0x110F4 - -/* PCI Express Control */ -#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000 -#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000 -#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000 -#define IXGBE_GCR_CAP_VER2 0x00040000 - -#define IXGBE_GCR_EXT_MSIX_EN 0x80000000 -#define IXGBE_GCR_EXT_BUFFERS_CLEAR 0x40000000 -#define IXGBE_GCR_EXT_VT_MODE_16 0x00000001 -#define IXGBE_GCR_EXT_VT_MODE_32 0x00000002 -#define IXGBE_GCR_EXT_VT_MODE_64 0x00000003 -#define IXGBE_GCR_EXT_SRIOV (IXGBE_GCR_EXT_MSIX_EN | \ - IXGBE_GCR_EXT_VT_MODE_64) -/* Time Sync Registers */ -#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */ -#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */ -#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */ -#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */ -#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */ -#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */ -#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */ -#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */ -#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */ -#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */ -#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */ -#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */ -#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */ -#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */ -#define IXGBE_TSAUXC 0x08C20 /* TimeSync Auxiliary Control register - RW */ -#define IXGBE_TRGTTIML0 0x08C24 /* Target Time Register 0 Low - RW */ -#define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */ -#define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */ -#define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */ -#define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */ -#define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */ -#define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */ -#define IXGBE_AUXSTMPH0 0x08C40 /* Auxiliary Time Stamp 0 register High - RO */ -#define IXGBE_AUXSTMPL1 0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */ -#define IXGBE_AUXSTMPH1 0x08C48 /* Auxiliary Time Stamp 1 register High - RO */ - -/* Diagnostic Registers */ -#define IXGBE_RDSTATCTL 0x02C20 -#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */ -#define IXGBE_RDHMPN 0x02F08 -#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4)) -#define IXGBE_RDPROBE 0x02F20 -#define IXGBE_RDMAM 0x02F30 -#define IXGBE_RDMAD 0x02F34 -#define IXGBE_TDSTATCTL 0x07C20 -#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */ -#define IXGBE_TDHMPN 0x07F08 -#define IXGBE_TDHMPN2 0x082FC -#define IXGBE_TXDESCIC 0x082CC -#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4)) -#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4)) -#define IXGBE_TDPROBE 0x07F20 -#define IXGBE_TXBUFCTRL 0x0C600 -#define IXGBE_TXBUFDATA0 0x0C610 -#define IXGBE_TXBUFDATA1 0x0C614 -#define IXGBE_TXBUFDATA2 0x0C618 -#define IXGBE_TXBUFDATA3 0x0C61C -#define IXGBE_RXBUFCTRL 0x03600 -#define IXGBE_RXBUFDATA0 0x03610 -#define IXGBE_RXBUFDATA1 0x03614 -#define IXGBE_RXBUFDATA2 0x03618 -#define IXGBE_RXBUFDATA3 0x0361C -#define IXGBE_PCIE_DIAG(_i) (0x11090 + ((_i) * 4)) /* 8 of these */ -#define IXGBE_RFVAL 0x050A4 -#define IXGBE_MDFTC1 0x042B8 -#define IXGBE_MDFTC2 0x042C0 -#define IXGBE_MDFTFIFO1 0x042C4 -#define IXGBE_MDFTFIFO2 0x042C8 -#define IXGBE_MDFTS 0x042CC -#define IXGBE_RXDATAWRPTR(_i) (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/ -#define IXGBE_RXDESCWRPTR(_i) (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/ -#define IXGBE_RXDATARDPTR(_i) (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/ -#define IXGBE_RXDESCRDPTR(_i) (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/ -#define IXGBE_TXDATAWRPTR(_i) (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/ -#define IXGBE_TXDESCWRPTR(_i) (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/ -#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/ -#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/ -#define IXGBE_PCIEECCCTL 0x1106C -#define IXGBE_RXWRPTR(_i) (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/ -#define IXGBE_RXUSED(_i) (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/ -#define IXGBE_RXRDPTR(_i) (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/ -#define IXGBE_RXRDWRPTR(_i) (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/ -#define IXGBE_TXWRPTR(_i) (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/ -#define IXGBE_TXUSED(_i) (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/ -#define IXGBE_TXRDPTR(_i) (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/ -#define IXGBE_TXRDWRPTR(_i) (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/ -#define IXGBE_PCIEECCCTL0 0x11100 -#define IXGBE_PCIEECCCTL1 0x11104 -#define IXGBE_RXDBUECC 0x03F70 -#define IXGBE_TXDBUECC 0x0CF70 -#define IXGBE_RXDBUEST 0x03F74 -#define IXGBE_TXDBUEST 0x0CF74 -#define IXGBE_PBTXECC 0x0C300 -#define IXGBE_PBRXECC 0x03300 -#define IXGBE_GHECCR 0x110B0 - -/* MAC Registers */ -#define IXGBE_PCS1GCFIG 0x04200 -#define IXGBE_PCS1GLCTL 0x04208 -#define IXGBE_PCS1GLSTA 0x0420C -#define IXGBE_PCS1GDBG0 0x04210 -#define IXGBE_PCS1GDBG1 0x04214 -#define IXGBE_PCS1GANA 0x04218 -#define IXGBE_PCS1GANLP 0x0421C -#define IXGBE_PCS1GANNP 0x04220 -#define IXGBE_PCS1GANLPNP 0x04224 -#define IXGBE_HLREG0 0x04240 -#define IXGBE_HLREG1 0x04244 -#define IXGBE_PAP 0x04248 -#define IXGBE_MACA 0x0424C -#define IXGBE_APAE 0x04250 -#define IXGBE_ARD 0x04254 -#define IXGBE_AIS 0x04258 -#define IXGBE_MSCA 0x0425C -#define IXGBE_MSRWD 0x04260 -#define IXGBE_MLADD 0x04264 -#define IXGBE_MHADD 0x04268 -#define IXGBE_MAXFRS 0x04268 -#define IXGBE_TREG 0x0426C -#define IXGBE_PCSS1 0x04288 -#define IXGBE_PCSS2 0x0428C -#define IXGBE_XPCSS 0x04290 -#define IXGBE_MFLCN 0x04294 -#define IXGBE_SERDESC 0x04298 -#define IXGBE_MACS 0x0429C -#define IXGBE_AUTOC 0x042A0 -#define IXGBE_LINKS 0x042A4 -#define IXGBE_LINKS2 0x04324 -#define IXGBE_AUTOC2 0x042A8 -#define IXGBE_AUTOC3 0x042AC -#define IXGBE_ANLP1 0x042B0 -#define IXGBE_ANLP2 0x042B4 -#define IXGBE_MACC 0x04330 -#define IXGBE_ATLASCTL 0x04800 -#define IXGBE_MMNGC 0x042D0 -#define IXGBE_ANLPNP1 0x042D4 -#define IXGBE_ANLPNP2 0x042D8 -#define IXGBE_KRPCSFC 0x042E0 -#define IXGBE_KRPCSS 0x042E4 -#define IXGBE_FECS1 0x042E8 -#define IXGBE_FECS2 0x042EC -#define IXGBE_SMADARCTL 0x14F10 -#define IXGBE_MPVC 0x04318 -#define IXGBE_SGMIIC 0x04314 - -/* Statistics Registers */ -#define IXGBE_RXNFGPC 0x041B0 -#define IXGBE_RXNFGBCL 0x041B4 -#define IXGBE_RXNFGBCH 0x041B8 -#define IXGBE_RXDGPC 0x02F50 -#define IXGBE_RXDGBCL 0x02F54 -#define IXGBE_RXDGBCH 0x02F58 -#define IXGBE_RXDDGPC 0x02F5C -#define IXGBE_RXDDGBCL 0x02F60 -#define IXGBE_RXDDGBCH 0x02F64 -#define IXGBE_RXLPBKGPC 0x02F68 -#define IXGBE_RXLPBKGBCL 0x02F6C -#define IXGBE_RXLPBKGBCH 0x02F70 -#define IXGBE_RXDLPBKGPC 0x02F74 -#define IXGBE_RXDLPBKGBCL 0x02F78 -#define IXGBE_RXDLPBKGBCH 0x02F7C -#define IXGBE_TXDGPC 0x087A0 -#define IXGBE_TXDGBCL 0x087A4 -#define IXGBE_TXDGBCH 0x087A8 - -#define IXGBE_RXDSTATCTRL 0x02F40 - -/* Copper Pond 2 link timeout */ -#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50 - -/* Omer CORECTL */ -#define IXGBE_CORECTL 0x014F00 -/* BARCTRL */ -#define IXGBE_BARCTRL 0x110F4 -#define IXGBE_BARCTRL_FLSIZE 0x0700 -#define IXGBE_BARCTRL_FLSIZE_SHIFT 8 -#define IXGBE_BARCTRL_CSRSIZE 0x2000 - -/* RSCCTL Bit Masks */ -#define IXGBE_RSCCTL_RSCEN 0x01 -#define IXGBE_RSCCTL_MAXDESC_1 0x00 -#define IXGBE_RSCCTL_MAXDESC_4 0x04 -#define IXGBE_RSCCTL_MAXDESC_8 0x08 -#define IXGBE_RSCCTL_MAXDESC_16 0x0C - -/* RSCDBU Bit Masks */ -#define IXGBE_RSCDBU_RSCSMALDIS_MASK 0x0000007F -#define IXGBE_RSCDBU_RSCACKDIS 0x00000080 - -/* RDRXCTL Bit Masks */ -#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min THLD Size */ -#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */ -#define IXGBE_RDRXCTL_MVMEN 0x00000020 -#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ -#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */ -#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000 /* RSC First packet size */ -#define IXGBE_RDRXCTL_RSCLLIDIS 0x00800000 /* Disabl RSC compl on LLI */ -#define IXGBE_RDRXCTL_RSCACKC 0x02000000 /* must set 1 when RSC ena */ -#define IXGBE_RDRXCTL_FCOE_WRFIX 0x04000000 /* must set 1 when RSC ena */ - -/* RQTC Bit Masks and Shifts */ -#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4) -#define IXGBE_RQTC_TC0_MASK (0x7 << 0) -#define IXGBE_RQTC_TC1_MASK (0x7 << 4) -#define IXGBE_RQTC_TC2_MASK (0x7 << 8) -#define IXGBE_RQTC_TC3_MASK (0x7 << 12) -#define IXGBE_RQTC_TC4_MASK (0x7 << 16) -#define IXGBE_RQTC_TC5_MASK (0x7 << 20) -#define IXGBE_RQTC_TC6_MASK (0x7 << 24) -#define IXGBE_RQTC_TC7_MASK (0x7 << 28) - -/* PSRTYPE.RQPL Bit masks and shift */ -#define IXGBE_PSRTYPE_RQPL_MASK 0x7 -#define IXGBE_PSRTYPE_RQPL_SHIFT 29 - -/* CTRL Bit Masks */ -#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */ -#define IXGBE_CTRL_LNK_RST 0x00000008 /* Link Reset. Resets everything. */ -#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */ -#define IXGBE_CTRL_RST_MASK (IXGBE_CTRL_LNK_RST | IXGBE_CTRL_RST) - -/* FACTPS */ -#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */ - -/* MHADD Bit Masks */ -#define IXGBE_MHADD_MFS_MASK 0xFFFF0000 -#define IXGBE_MHADD_MFS_SHIFT 16 - -/* Extended Device Control */ -#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */ -#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */ -#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ -#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ - -/* Direct Cache Access (DCA) definitions */ -#define IXGBE_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ -#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ - -#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ -#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ - -#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ -#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */ -#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */ -#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* Rx Desc enable */ -#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* Rx Desc header ena */ -#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* Rx Desc payload ena */ -#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* Rx rd Desc Relax Order */ -#define IXGBE_DCA_RXCTRL_DATA_WRO_EN (1 << 13) /* Rx wr data Relax Order */ -#define IXGBE_DCA_RXCTRL_HEAD_WRO_EN (1 << 15) /* Rx wr header RO */ - -#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ -#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */ -#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */ -#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ -#define IXGBE_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */ -#define IXGBE_DCA_TXCTRL_DESC_WRO_EN (1 << 11) /* Tx Desc writeback RO bit */ -#define IXGBE_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */ -#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */ - -/* MSCA Bit Masks */ -#define IXGBE_MSCA_NP_ADDR_MASK 0x0000FFFF /* MDI Addr (new prot) */ -#define IXGBE_MSCA_NP_ADDR_SHIFT 0 -#define IXGBE_MSCA_DEV_TYPE_MASK 0x001F0000 /* Dev Type (new prot) */ -#define IXGBE_MSCA_DEV_TYPE_SHIFT 16 /* Register Address (old prot */ -#define IXGBE_MSCA_PHY_ADDR_MASK 0x03E00000 /* PHY Address mask */ -#define IXGBE_MSCA_PHY_ADDR_SHIFT 21 /* PHY Address shift*/ -#define IXGBE_MSCA_OP_CODE_MASK 0x0C000000 /* OP CODE mask */ -#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */ -#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */ -#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (wr) */ -#define IXGBE_MSCA_READ 0x0C000000 /* OP CODE 11 (rd) */ -#define IXGBE_MSCA_READ_AUTOINC 0x08000000 /* OP CODE 10 (rd auto inc)*/ -#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */ -#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */ -#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new prot) */ -#define IXGBE_MSCA_OLD_PROTOCOL 0x10000000 /* ST CODE 01 (old prot) */ -#define IXGBE_MSCA_MDI_COMMAND 0x40000000 /* Initiate MDI command */ -#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress ena */ - -/* MSRWD bit masks */ -#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF -#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0 -#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000 -#define IXGBE_MSRWD_READ_DATA_SHIFT 16 - -/* Atlas registers */ -#define IXGBE_ATLAS_PDN_LPBK 0x24 -#define IXGBE_ATLAS_PDN_10G 0xB -#define IXGBE_ATLAS_PDN_1G 0xC -#define IXGBE_ATLAS_PDN_AN 0xD - -/* Atlas bit masks */ -#define IXGBE_ATLASCTL_WRITE_CMD 0x00010000 -#define IXGBE_ATLAS_PDN_TX_REG_EN 0x10 -#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL 0xF0 -#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0 -#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0 - -/* Omer bit masks */ -#define IXGBE_CORECTL_WRITE_CMD 0x00010000 - -/* Device Type definitions for new protocol MDIO commands */ -#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 -#define IXGBE_MDIO_PCS_DEV_TYPE 0x3 -#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 -#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7 -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */ -#define IXGBE_TWINAX_DEV 1 - -#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */ - -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Ctrl Reg */ -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */ -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */ -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0-10G, 1-1G */ -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018 -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010 - -#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */ -#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */ -#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */ -#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */ -#define IXGBE_MDIO_PHY_XS_CONTROL 0x0 /* PHY_XS Control Reg */ -#define IXGBE_MDIO_PHY_XS_RESET 0x8000 /* PHY_XS Reset */ -#define IXGBE_MDIO_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/ -#define IXGBE_MDIO_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/ -#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Ability Reg */ -#define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */ -#define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */ -#define IXGBE_MDIO_PHY_SPEED_100M 0x0020 /* 100M capable */ -#define IXGBE_MDIO_PHY_EXT_ABILITY 0xB /* Ext Ability Reg */ -#define IXGBE_MDIO_PHY_10GBASET_ABILITY 0x0004 /* 10GBaseT capable */ -#define IXGBE_MDIO_PHY_1000BASET_ABILITY 0x0020 /* 1000BaseT capable */ -#define IXGBE_MDIO_PHY_100BASETX_ABILITY 0x0080 /* 100BaseTX capable */ -#define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE 0x0800 /* Set low power mode */ - -#define IXGBE_MDIO_PMA_PMD_CONTROL_ADDR 0x0000 /* PMA/PMD Control Reg */ -#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ -#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ -#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */ - -/* MII clause 22/28 definitions */ -#define IXGBE_MDIO_PHY_LOW_POWER_MODE 0x0800 - -#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG 0x20 /* 10G Control Reg */ -#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */ -#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */ -#define IXGBE_MII_AUTONEG_ADVERTISE_REG 0x10 /* 100M Advertisement */ -#define IXGBE_MII_10GBASE_T_ADVERTISE 0x1000 /* full duplex, bit:12*/ -#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/ -#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/ -#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */ -#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */ -#define IXGBE_MII_RESTART 0x200 -#define IXGBE_MII_AUTONEG_COMPLETE 0x20 -#define IXGBE_MII_AUTONEG_LINK_UP 0x04 -#define IXGBE_MII_AUTONEG_REG 0x0 - -#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 -#define IXGBE_MAX_PHY_ADDR 32 - -/* PHY IDs*/ -#define TN1010_PHY_ID 0x00A19410 -#define TNX_FW_REV 0xB -#define X540_PHY_ID 0x01540200 -#define AQ_FW_REV 0x20 -#define QT2022_PHY_ID 0x0043A400 -#define ATH_PHY_ID 0x03429050 - -/* PHY Types */ -#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0 - -/* Special PHY Init Routine */ -#define IXGBE_PHY_INIT_OFFSET_NL 0x002B -#define IXGBE_PHY_INIT_END_NL 0xFFFF -#define IXGBE_CONTROL_MASK_NL 0xF000 -#define IXGBE_DATA_MASK_NL 0x0FFF -#define IXGBE_CONTROL_SHIFT_NL 12 -#define IXGBE_DELAY_NL 0 -#define IXGBE_DATA_NL 1 -#define IXGBE_CONTROL_NL 0x000F -#define IXGBE_CONTROL_EOL_NL 0x0FFF -#define IXGBE_CONTROL_SOL_NL 0x0000 - -/* General purpose Interrupt Enable */ -#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */ -#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */ -#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */ -#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */ -#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */ -#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */ -#define IXGBE_GPIE_EIAME 0x40000000 -#define IXGBE_GPIE_PBA_SUPPORT 0x80000000 -#define IXGBE_GPIE_RSC_DELAY_SHIFT 11 -#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */ -#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */ -#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */ -#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */ - -/* Packet Buffer Initialization */ -#define IXGBE_MAX_PACKET_BUFFERS 8 - -#define IXGBE_TXPBSIZE_20KB 0x00005000 /* 20KB Packet Buffer */ -#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */ -#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */ -#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */ -#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */ -#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */ -#define IXGBE_RXPBSIZE_MAX 0x00080000 /* 512KB Packet Buffer */ -#define IXGBE_TXPBSIZE_MAX 0x00028000 /* 160KB Packet Buffer */ - -#define IXGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */ -#define IXGBE_MAX_PB 8 - -/* Packet buffer allocation strategies */ -enum { - PBA_STRATEGY_EQUAL = 0, /* Distribute PB space equally */ -#define PBA_STRATEGY_EQUAL PBA_STRATEGY_EQUAL - PBA_STRATEGY_WEIGHTED = 1, /* Weight front half of TCs */ -#define PBA_STRATEGY_WEIGHTED PBA_STRATEGY_WEIGHTED -}; - -/* Transmit Flow Control status */ -#define IXGBE_TFCS_TXOFF 0x00000001 -#define IXGBE_TFCS_TXOFF0 0x00000100 -#define IXGBE_TFCS_TXOFF1 0x00000200 -#define IXGBE_TFCS_TXOFF2 0x00000400 -#define IXGBE_TFCS_TXOFF3 0x00000800 -#define IXGBE_TFCS_TXOFF4 0x00001000 -#define IXGBE_TFCS_TXOFF5 0x00002000 -#define IXGBE_TFCS_TXOFF6 0x00004000 -#define IXGBE_TFCS_TXOFF7 0x00008000 - -/* TCP Timer */ -#define IXGBE_TCPTIMER_KS 0x00000100 -#define IXGBE_TCPTIMER_COUNT_ENABLE 0x00000200 -#define IXGBE_TCPTIMER_COUNT_FINISH 0x00000400 -#define IXGBE_TCPTIMER_LOOP 0x00000800 -#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF - -/* HLREG0 Bit Masks */ -#define IXGBE_HLREG0_TXCRCEN 0x00000001 /* bit 0 */ -#define IXGBE_HLREG0_RXCRCSTRP 0x00000002 /* bit 1 */ -#define IXGBE_HLREG0_JUMBOEN 0x00000004 /* bit 2 */ -#define IXGBE_HLREG0_TXPADEN 0x00000400 /* bit 10 */ -#define IXGBE_HLREG0_TXPAUSEEN 0x00001000 /* bit 12 */ -#define IXGBE_HLREG0_RXPAUSEEN 0x00004000 /* bit 14 */ -#define IXGBE_HLREG0_LPBK 0x00008000 /* bit 15 */ -#define IXGBE_HLREG0_MDCSPD 0x00010000 /* bit 16 */ -#define IXGBE_HLREG0_CONTMDC 0x00020000 /* bit 17 */ -#define IXGBE_HLREG0_CTRLFLTR 0x00040000 /* bit 18 */ -#define IXGBE_HLREG0_PREPEND 0x00F00000 /* bits 20-23 */ -#define IXGBE_HLREG0_PRIPAUSEEN 0x01000000 /* bit 24 */ -#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000 /* bits 25-26 */ -#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000 /* bit 27 */ -#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000 /* bit 28 */ - -/* VMD_CTL bitmasks */ -#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001 -#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002 - -/* VT_CTL bitmasks */ -#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */ -#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */ -#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */ -#define IXGBE_VT_CTL_POOL_SHIFT 7 -#define IXGBE_VT_CTL_POOL_MASK (0x3F << IXGBE_VT_CTL_POOL_SHIFT) - -/* VMOLR bitmasks */ -#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */ -#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */ -#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */ -#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */ -#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */ - -/* VFRE bitmask */ -#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF - -#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ - -/* RDHMPN and TDHMPN bitmasks */ -#define IXGBE_RDHMPN_RDICADDR 0x007FF800 -#define IXGBE_RDHMPN_RDICRDREQ 0x00800000 -#define IXGBE_RDHMPN_RDICADDR_SHIFT 11 -#define IXGBE_TDHMPN_TDICADDR 0x003FF800 -#define IXGBE_TDHMPN_TDICRDREQ 0x00800000 -#define IXGBE_TDHMPN_TDICADDR_SHIFT 11 - -#define IXGBE_RDMAM_MEM_SEL_SHIFT 13 -#define IXGBE_RDMAM_DWORD_SHIFT 9 -#define IXGBE_RDMAM_DESC_COMP_FIFO 1 -#define IXGBE_RDMAM_DFC_CMD_FIFO 2 -#define IXGBE_RDMAM_RSC_HEADER_ADDR 3 -#define IXGBE_RDMAM_TCN_STATUS_RAM 4 -#define IXGBE_RDMAM_WB_COLL_FIFO 5 -#define IXGBE_RDMAM_QSC_CNT_RAM 6 -#define IXGBE_RDMAM_QSC_FCOE_RAM 7 -#define IXGBE_RDMAM_QSC_QUEUE_CNT 8 -#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA -#define IXGBE_RDMAM_QSC_RSC_RAM 0xB -#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135 -#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4 -#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48 -#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7 -#define IXGBE_RDMAM_RSC_HEADER_ADDR_RANGE 32 -#define IXGBE_RDMAM_RSC_HEADER_ADDR_COUNT 4 -#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256 -#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9 -#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8 -#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4 -#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64 -#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4 -#define IXGBE_RDMAM_QSC_FCOE_RAM_RANGE 512 -#define IXGBE_RDMAM_QSC_FCOE_RAM_COUNT 5 -#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32 -#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4 -#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128 -#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8 -#define IXGBE_RDMAM_QSC_RSC_RAM_RANGE 32 -#define IXGBE_RDMAM_QSC_RSC_RAM_COUNT 8 - -#define IXGBE_TXDESCIC_READY 0x80000000 - -/* Receive Checksum Control */ -#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ -#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ - -/* FCRTL Bit Masks */ -#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */ -#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */ - -/* PAP bit masks*/ -#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */ - -/* RMCS Bit Masks */ -#define IXGBE_RMCS_RRM 0x00000002 /* Rx Recycle Mode enable */ -/* Receive Arbitration Control: 0 Round Robin, 1 DFP */ -#define IXGBE_RMCS_RAC 0x00000004 -/* Deficit Fixed Prio ena */ -#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC -#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */ -#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */ -#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */ - -/* FCCFG Bit Masks */ -#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */ -#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */ - -/* Interrupt register bitmasks */ - -/* Extended Interrupt Cause Read */ -#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */ -#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */ -#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */ -#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */ -#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */ -#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */ -#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */ -#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */ -#define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */ -#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */ -#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */ -#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */ -#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */ -#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */ -#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */ -#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ -#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ - -/* Extended Interrupt Cause Set */ -#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ -#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ -#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */ -#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */ -#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ -#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ -#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ -#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ -#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ -#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ -#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */ -#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ -#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */ -#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ -#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ - -/* Extended Interrupt Mask Set */ -#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ -#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ -#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ -#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */ -#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ -#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */ -#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ -#define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermal Sensor Event */ -#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ -#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ -#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ -#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */ -#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ -#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */ -#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ -#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ - -/* Extended Interrupt Mask Clear */ -#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ -#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ -#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ -#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */ -#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ -#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ -#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ -#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ -#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ -#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ -#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */ -#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ -#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */ -#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ -#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ - -#define IXGBE_EIMS_ENABLE_MASK ( \ - IXGBE_EIMS_RTX_QUEUE | \ - IXGBE_EIMS_LSC | \ - IXGBE_EIMS_TCP_TIMER | \ - IXGBE_EIMS_OTHER) - -/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ -#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ -#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ -#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ -#define IXGBE_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ -#define IXGBE_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ -#define IXGBE_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ -#define IXGBE_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ -#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ -#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ -#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */ -#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */ -#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */ -#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */ -#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */ -#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */ -#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */ -#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */ -#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass chk of ctrl bits */ -#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */ -#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */ -#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */ -#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */ -#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */ - -#define IXGBE_MAX_FTQF_FILTERS 128 -#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003 -#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000 -#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001 -#define IXGBE_FTQF_PROTOCOL_SCTP 2 -#define IXGBE_FTQF_PRIORITY_MASK 0x00000007 -#define IXGBE_FTQF_PRIORITY_SHIFT 2 -#define IXGBE_FTQF_POOL_MASK 0x0000003F -#define IXGBE_FTQF_POOL_SHIFT 8 -#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F -#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25 -#define IXGBE_FTQF_SOURCE_ADDR_MASK 0x1E -#define IXGBE_FTQF_DEST_ADDR_MASK 0x1D -#define IXGBE_FTQF_SOURCE_PORT_MASK 0x1B -#define IXGBE_FTQF_DEST_PORT_MASK 0x17 -#define IXGBE_FTQF_PROTOCOL_COMP_MASK 0x0F -#define IXGBE_FTQF_POOL_MASK_EN 0x40000000 -#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000 - -/* Interrupt clear mask */ -#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF - -/* Interrupt Vector Allocation Registers */ -#define IXGBE_IVAR_REG_NUM 25 -#define IXGBE_IVAR_REG_NUM_82599 64 -#define IXGBE_IVAR_TXRX_ENTRY 96 -#define IXGBE_IVAR_RX_ENTRY 64 -#define IXGBE_IVAR_RX_QUEUE(_i) (0 + (_i)) -#define IXGBE_IVAR_TX_QUEUE(_i) (64 + (_i)) -#define IXGBE_IVAR_TX_ENTRY 32 - -#define IXGBE_IVAR_TCP_TIMER_INDEX 96 /* 0 based index */ -#define IXGBE_IVAR_OTHER_CAUSES_INDEX 97 /* 0 based index */ - -#define IXGBE_MSIX_VECTOR(_i) (0 + (_i)) - -#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */ - -/* ETYPE Queue Filter/Select Bit Masks */ -#define IXGBE_MAX_ETQF_FILTERS 8 -#define IXGBE_ETQF_FCOE 0x08000000 /* bit 27 */ -#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */ -#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */ -#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */ -#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */ - -#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */ -#define IXGBE_ETQS_RX_QUEUE_SHIFT 16 -#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */ -#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */ - -/* - * ETQF filter list: one static filter per filter consumer. This is - * to avoid filter collisions later. Add new filters - * here!! - * - * Current filters: - * EAPOL 802.1x (0x888e): Filter 0 - * FCoE (0x8906): Filter 2 - * 1588 (0x88f7): Filter 3 - * FIP (0x8914): Filter 4 - */ -#define IXGBE_ETQF_FILTER_EAPOL 0 -#define IXGBE_ETQF_FILTER_FCOE 2 -#define IXGBE_ETQF_FILTER_1588 3 -#define IXGBE_ETQF_FILTER_FIP 4 -/* VLAN Control Bit Masks */ -#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */ -#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */ -#define IXGBE_VLNCTRL_CFIEN 0x20000000 /* bit 29 */ -#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */ -#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */ - -/* VLAN pool filtering masks */ -#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */ -#define IXGBE_VLVF_ENTRIES 64 -#define IXGBE_VLVF_VLANID_MASK 0x00000FFF -/* Per VF Port VLAN insertion rules */ -#define IXGBE_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ -#define IXGBE_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ - -#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */ - -/* STATUS Bit Masks */ -#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */ -#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/ -#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Ena Status */ - -#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */ -#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */ - -/* ESDP Bit Masks */ -#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */ -#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */ -#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */ -#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */ -#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */ -#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */ -#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */ -#define IXGBE_ESDP_SDP0_DIR 0x00000100 /* SDP0 IO direction */ -#define IXGBE_ESDP_SDP1_DIR 0x00000200 /* SDP1 IO direction */ -#define IXGBE_ESDP_SDP4_DIR 0x00001000 /* SDP4 IO direction */ -#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */ -#define IXGBE_ESDP_SDP0_NATIVE 0x00010000 /* SDP0 IO mode */ -#define IXGBE_ESDP_SDP1_NATIVE 0x00020000 /* SDP1 IO mode */ - - -/* LEDCTL Bit Masks */ -#define IXGBE_LED_IVRT_BASE 0x00000040 -#define IXGBE_LED_BLINK_BASE 0x00000080 -#define IXGBE_LED_MODE_MASK_BASE 0x0000000F -#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i))) -#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i)) -#define IXGBE_LED_IVRT(_i) IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i) -#define IXGBE_LED_BLINK(_i) IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i) -#define IXGBE_LED_MODE_MASK(_i) IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i) - -/* LED modes */ -#define IXGBE_LED_LINK_UP 0x0 -#define IXGBE_LED_LINK_10G 0x1 -#define IXGBE_LED_MAC 0x2 -#define IXGBE_LED_FILTER 0x3 -#define IXGBE_LED_LINK_ACTIVE 0x4 -#define IXGBE_LED_LINK_1G 0x5 -#define IXGBE_LED_ON 0xE -#define IXGBE_LED_OFF 0xF - -/* AUTOC Bit Masks */ -#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000 -#define IXGBE_AUTOC_KX4_SUPP 0x80000000 -#define IXGBE_AUTOC_KX_SUPP 0x40000000 -#define IXGBE_AUTOC_PAUSE 0x30000000 -#define IXGBE_AUTOC_ASM_PAUSE 0x20000000 -#define IXGBE_AUTOC_SYM_PAUSE 0x10000000 -#define IXGBE_AUTOC_RF 0x08000000 -#define IXGBE_AUTOC_PD_TMR 0x06000000 -#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000 -#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000 -#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000 -#define IXGBE_AUTOC_FECA 0x00040000 -#define IXGBE_AUTOC_FECR 0x00020000 -#define IXGBE_AUTOC_KR_SUPP 0x00010000 -#define IXGBE_AUTOC_AN_RESTART 0x00001000 -#define IXGBE_AUTOC_FLU 0x00000001 -#define IXGBE_AUTOC_LMS_SHIFT 13 -#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) -#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) - -#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200 -#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9 -#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180 -#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7 -#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) -#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) -#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) -#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) -#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) -#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) -#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) - -#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000 -#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000 -#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16 -#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) -#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) -#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) - -#define IXGBE_MACC_FLU 0x00000001 -#define IXGBE_MACC_FSV_10G 0x00030000 -#define IXGBE_MACC_FS 0x00040000 -#define IXGBE_MAC_RX2TX_LPBK 0x00000002 - -/* LINKS Bit Masks */ -#define IXGBE_LINKS_KX_AN_COMP 0x80000000 -#define IXGBE_LINKS_UP 0x40000000 -#define IXGBE_LINKS_SPEED 0x20000000 -#define IXGBE_LINKS_MODE 0x18000000 -#define IXGBE_LINKS_RX_MODE 0x06000000 -#define IXGBE_LINKS_TX_MODE 0x01800000 -#define IXGBE_LINKS_XGXS_EN 0x00400000 -#define IXGBE_LINKS_SGMII_EN 0x02000000 -#define IXGBE_LINKS_PCS_1G_EN 0x00200000 -#define IXGBE_LINKS_1G_AN_EN 0x00100000 -#define IXGBE_LINKS_KX_AN_IDLE 0x00080000 -#define IXGBE_LINKS_1G_SYNC 0x00040000 -#define IXGBE_LINKS_10G_ALIGN 0x00020000 -#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000 -#define IXGBE_LINKS_TL_FAULT 0x00001000 -#define IXGBE_LINKS_SIGNAL 0x00000F00 - -#define IXGBE_LINKS_SPEED_82599 0x30000000 -#define IXGBE_LINKS_SPEED_10G_82599 0x30000000 -#define IXGBE_LINKS_SPEED_1G_82599 0x20000000 -#define IXGBE_LINKS_SPEED_100_82599 0x10000000 -#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */ -#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */ - -#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040 - -/* PCS1GLSTA Bit Masks */ -#define IXGBE_PCS1GLSTA_LINK_OK 1 -#define IXGBE_PCS1GLSTA_SYNK_OK 0x10 -#define IXGBE_PCS1GLSTA_AN_COMPLETE 0x10000 -#define IXGBE_PCS1GLSTA_AN_PAGE_RX 0x20000 -#define IXGBE_PCS1GLSTA_AN_TIMED_OUT 0x40000 -#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000 -#define IXGBE_PCS1GLSTA_AN_ERROR_RWS 0x100000 - -#define IXGBE_PCS1GANA_SYM_PAUSE 0x80 -#define IXGBE_PCS1GANA_ASM_PAUSE 0x100 - -/* PCS1GLCTL Bit Masks */ -#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */ -#define IXGBE_PCS1GLCTL_FLV_LINK_UP 1 -#define IXGBE_PCS1GLCTL_FORCE_LINK 0x20 -#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH 0x40 -#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000 -#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000 - -/* ANLP1 Bit Masks */ -#define IXGBE_ANLP1_PAUSE 0x0C00 -#define IXGBE_ANLP1_SYM_PAUSE 0x0400 -#define IXGBE_ANLP1_ASM_PAUSE 0x0800 -#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000 - -/* SW Semaphore Register bitmasks */ -#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ -#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ -#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ -#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */ - -/* SW_FW_SYNC/GSSR definitions */ -#define IXGBE_GSSR_EEP_SM 0x0001 -#define IXGBE_GSSR_PHY0_SM 0x0002 -#define IXGBE_GSSR_PHY1_SM 0x0004 -#define IXGBE_GSSR_MAC_CSR_SM 0x0008 -#define IXGBE_GSSR_FLASH_SM 0x0010 -#define IXGBE_GSSR_SW_MNG_SM 0x0400 - -/* FW Status register bitmask */ -#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */ - -/* EEC Register */ -#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */ -#define IXGBE_EEC_CS 0x00000002 /* EEPROM Chip Select */ -#define IXGBE_EEC_DI 0x00000004 /* EEPROM Data In */ -#define IXGBE_EEC_DO 0x00000008 /* EEPROM Data Out */ -#define IXGBE_EEC_FWE_MASK 0x00000030 /* FLASH Write Enable */ -#define IXGBE_EEC_FWE_DIS 0x00000010 /* Disable FLASH writes */ -#define IXGBE_EEC_FWE_EN 0x00000020 /* Enable FLASH writes */ -#define IXGBE_EEC_FWE_SHIFT 4 -#define IXGBE_EEC_REQ 0x00000040 /* EEPROM Access Request */ -#define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */ -#define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */ -#define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */ -#define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */ -#define IXGBE_EEC_SEC1VAL 0x02000000 /* Sector 1 Valid */ -#define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */ -/* EEPROM Addressing bits based on type (0-small, 1-large) */ -#define IXGBE_EEC_ADDR_SIZE 0x00000400 -#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */ -#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */ - -#define IXGBE_EEC_SIZE_SHIFT 11 -#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6 -#define IXGBE_EEPROM_OPCODE_BITS 8 - -/* Part Number String Length */ -#define IXGBE_PBANUM_LENGTH 11 - -/* Checksum and EEPROM pointers */ -#define IXGBE_PBANUM_PTR_GUARD 0xFAFA -#define IXGBE_EEPROM_CHECKSUM 0x3F -#define IXGBE_EEPROM_SUM 0xBABA -#define IXGBE_PCIE_ANALOG_PTR 0x03 -#define IXGBE_ATLAS0_CONFIG_PTR 0x04 -#define IXGBE_PHY_PTR 0x04 -#define IXGBE_ATLAS1_CONFIG_PTR 0x05 -#define IXGBE_OPTION_ROM_PTR 0x05 -#define IXGBE_PCIE_GENERAL_PTR 0x06 -#define IXGBE_PCIE_CONFIG0_PTR 0x07 -#define IXGBE_PCIE_CONFIG1_PTR 0x08 -#define IXGBE_CORE0_PTR 0x09 -#define IXGBE_CORE1_PTR 0x0A -#define IXGBE_MAC0_PTR 0x0B -#define IXGBE_MAC1_PTR 0x0C -#define IXGBE_CSR0_CONFIG_PTR 0x0D -#define IXGBE_CSR1_CONFIG_PTR 0x0E -#define IXGBE_FW_PTR 0x0F -#define IXGBE_PBANUM0_PTR 0x15 -#define IXGBE_PBANUM1_PTR 0x16 -#define IXGBE_ALT_MAC_ADDR_PTR 0x37 -#define IXGBE_FREE_SPACE_PTR 0X3E - -/* External Thermal Sensor Config */ -#define IXGBE_ETS_CFG 0x26 -#define IXGBE_ETS_LTHRES_DELTA_MASK 0x07C0 -#define IXGBE_ETS_LTHRES_DELTA_SHIFT 6 -#define IXGBE_ETS_TYPE_MASK 0x0038 -#define IXGBE_ETS_TYPE_SHIFT 3 -#define IXGBE_ETS_TYPE_EMC 0x000 -#define IXGBE_ETS_NUM_SENSORS_MASK 0x0007 -#define IXGBE_ETS_DATA_LOC_MASK 0x3C00 -#define IXGBE_ETS_DATA_LOC_SHIFT 10 -#define IXGBE_ETS_DATA_INDEX_MASK 0x0300 -#define IXGBE_ETS_DATA_INDEX_SHIFT 8 -#define IXGBE_ETS_DATA_HTHRESH_MASK 0x00FF - -#define IXGBE_SAN_MAC_ADDR_PTR 0x28 -#define IXGBE_DEVICE_CAPS 0x2C -#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11 -#define IXGBE_PCIE_MSIX_82599_CAPS 0x72 -#define IXGBE_MAX_MSIX_VECTORS_82599 0x40 -#define IXGBE_PCIE_MSIX_82598_CAPS 0x62 -#define IXGBE_MAX_MSIX_VECTORS_82598 0x13 - -/* MSI-X capability fields masks */ -#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF - -/* Legacy EEPROM word offsets */ -#define IXGBE_ISCSI_BOOT_CAPS 0x0033 -#define IXGBE_ISCSI_SETUP_PORT_0 0x0030 -#define IXGBE_ISCSI_SETUP_PORT_1 0x0034 - -/* EEPROM Commands - SPI */ -#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */ -#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01 -#define IXGBE_EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ -#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ -#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */ -#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */ -/* EEPROM reset Write Enable latch */ -#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04 -#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */ -#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */ -#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ -#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ -#define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ - -/* EEPROM Read Register */ -#define IXGBE_EEPROM_RW_REG_DATA 16 /* data offset in EEPROM read reg */ -#define IXGBE_EEPROM_RW_REG_DONE 2 /* Offset to READ done bit */ -#define IXGBE_EEPROM_RW_REG_START 1 /* First bit to start operation */ -#define IXGBE_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ -#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for wr complete */ -#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for rd complete */ - -#define IXGBE_ETH_LENGTH_OF_ADDRESS 6 - -#define IXGBE_EEPROM_PAGE_SIZE_MAX 128 -#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* words rd in burst */ -#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* words wr in burst */ - -#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS -#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM attempts to gain grant */ -#endif - -#ifndef IXGBE_EERD_EEWR_ATTEMPTS -/* Number of 5 microseconds we wait for EERD read and - * EERW write to complete */ -#define IXGBE_EERD_EEWR_ATTEMPTS 100000 -#endif - -#ifndef IXGBE_FLUDONE_ATTEMPTS -/* # attempts we wait for flush update to complete */ -#define IXGBE_FLUDONE_ATTEMPTS 20000 -#endif - -#define IXGBE_PCIE_CTRL2 0x5 /* PCIe Control 2 Offset */ -#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE 0x8 /* Dummy Function Enable */ -#define IXGBE_PCIE_CTRL2_LAN_DISABLE 0x2 /* LAN PCI Disable */ -#define IXGBE_PCIE_CTRL2_DISABLE_SELECT 0x1 /* LAN Disable Select */ - -#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0 -#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3 -#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1 -#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2 -#define IXGBE_FW_LESM_PARAMETERS_PTR 0x2 -#define IXGBE_FW_LESM_STATE_1 0x1 -#define IXGBE_FW_LESM_STATE_ENABLED 0x8000 /* LESM Enable bit */ -#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4 -#define IXGBE_FW_PATCH_VERSION_4 0x7 -#define IXGBE_FCOE_IBA_CAPS_BLK_PTR 0x33 /* iSCSI/FCOE block */ -#define IXGBE_FCOE_IBA_CAPS_FCOE 0x20 /* FCOE flags */ -#define IXGBE_ISCSI_FCOE_BLK_PTR 0x17 /* iSCSI/FCOE block */ -#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET 0x0 /* FCOE flags */ -#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE 0x1 /* FCOE flags enable bit */ -#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR 0x27 /* Alt. SAN MAC block */ -#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET 0x0 /* Alt SAN MAC capability */ -#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt SAN MAC 0 offset */ -#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt SAN MAC 1 offset */ -#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET 0x7 /* Alt WWNN prefix offset */ -#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET 0x8 /* Alt WWPN prefix offset */ -#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC 0x0 /* Alt SAN MAC exists */ -#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN 0x1 /* Alt WWN base exists */ - -#define IXGBE_DEVICE_CAPS_WOL_PORT0_1 0x4 /* WoL supported on ports 0 & 1 */ -#define IXGBE_DEVICE_CAPS_WOL_PORT0 0x8 /* WoL supported on port 0 */ -#define IXGBE_DEVICE_CAPS_WOL_MASK 0xC /* Mask for WoL capabilities */ - -/* PCI Bus Info */ -#define IXGBE_PCI_DEVICE_STATUS 0xAA -#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020 -#define IXGBE_PCI_LINK_STATUS 0xB2 -#define IXGBE_PCI_DEVICE_CONTROL2 0xC8 -#define IXGBE_PCI_LINK_WIDTH 0x3F0 -#define IXGBE_PCI_LINK_WIDTH_1 0x10 -#define IXGBE_PCI_LINK_WIDTH_2 0x20 -#define IXGBE_PCI_LINK_WIDTH_4 0x40 -#define IXGBE_PCI_LINK_WIDTH_8 0x80 -#define IXGBE_PCI_LINK_SPEED 0xF -#define IXGBE_PCI_LINK_SPEED_2500 0x1 -#define IXGBE_PCI_LINK_SPEED_5000 0x2 -#define IXGBE_PCI_LINK_SPEED_8000 0x3 -#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E -#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80 -#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005 - -/* Number of 100 microseconds we wait for PCI Express master disable */ -#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800 - -/* Check whether address is multicast. This is little-endian specific check.*/ -#define IXGBE_IS_MULTICAST(Address) \ - (bool)(((u8 *)(Address))[0] & ((u8)0x01)) - -/* Check whether an address is broadcast. */ -#define IXGBE_IS_BROADCAST(Address) \ - ((((u8 *)(Address))[0] == ((u8)0xff)) && \ - (((u8 *)(Address))[1] == ((u8)0xff))) - -/* RAH */ -#define IXGBE_RAH_VIND_MASK 0x003C0000 -#define IXGBE_RAH_VIND_SHIFT 18 -#define IXGBE_RAH_AV 0x80000000 -#define IXGBE_CLEAR_VMDQ_ALL 0xFFFFFFFF - -/* Header split receive */ -#define IXGBE_RFCTL_ISCSI_DIS 0x00000001 -#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E -#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1 -#define IXGBE_RFCTL_RSC_DIS 0x00000010 -#define IXGBE_RFCTL_NFSW_DIS 0x00000040 -#define IXGBE_RFCTL_NFSR_DIS 0x00000080 -#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300 -#define IXGBE_RFCTL_NFS_VER_SHIFT 8 -#define IXGBE_RFCTL_NFS_VER_2 0 -#define IXGBE_RFCTL_NFS_VER_3 1 -#define IXGBE_RFCTL_NFS_VER_4 2 -#define IXGBE_RFCTL_IPV6_DIS 0x00000400 -#define IXGBE_RFCTL_IPV6_XSUM_DIS 0x00000800 -#define IXGBE_RFCTL_IPFRSP_DIS 0x00004000 -#define IXGBE_RFCTL_IPV6_EX_DIS 0x00010000 -#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 - -/* Transmit Config masks */ -#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Ena specific Tx Queue */ -#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wr-bk flushing */ -#define IXGBE_TXDCTL_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */ -/* Enable short packet padding to 64 bytes */ -#define IXGBE_TX_PAD_ENABLE 0x00000400 -#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */ -/* This allows for 16K packets + 4k for vlan */ -#define IXGBE_MAX_FRAME_SZ 0x40040000 - -#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */ -#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq# write-back enable */ - -/* Receive Config masks */ -#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */ -#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Desc Monitor Bypass */ -#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Ena specific Rx Queue */ -#define IXGBE_RXDCTL_SWFLSH 0x04000000 /* Rx Desc wr-bk flushing */ -#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* X540 supported only */ -#define IXGBE_RXDCTL_RLPML_EN 0x00008000 -#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */ - -#define IXGBE_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ -#define IXGBE_TSYNCTXCTL_ENABLED 0x00000010 /* Tx timestamping enabled */ - -#define IXGBE_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ -#define IXGBE_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ -#define IXGBE_TSYNCRXCTL_TYPE_L2_V2 0x00 -#define IXGBE_TSYNCRXCTL_TYPE_L4_V1 0x02 -#define IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 -#define IXGBE_TSYNCRXCTL_TYPE_EVENT_V2 0x0A -#define IXGBE_TSYNCRXCTL_ENABLED 0x00000010 /* Rx Timestamping enabled */ - -#define IXGBE_RXMTRL_V1_CTRLT_MASK 0x000000FF -#define IXGBE_RXMTRL_V1_SYNC_MSG 0x00 -#define IXGBE_RXMTRL_V1_DELAY_REQ_MSG 0x01 -#define IXGBE_RXMTRL_V1_FOLLOWUP_MSG 0x02 -#define IXGBE_RXMTRL_V1_DELAY_RESP_MSG 0x03 -#define IXGBE_RXMTRL_V1_MGMT_MSG 0x04 - -#define IXGBE_RXMTRL_V2_MSGID_MASK 0x0000FF00 -#define IXGBE_RXMTRL_V2_SYNC_MSG 0x0000 -#define IXGBE_RXMTRL_V2_DELAY_REQ_MSG 0x0100 -#define IXGBE_RXMTRL_V2_PDELAY_REQ_MSG 0x0200 -#define IXGBE_RXMTRL_V2_PDELAY_RESP_MSG 0x0300 -#define IXGBE_RXMTRL_V2_FOLLOWUP_MSG 0x0800 -#define IXGBE_RXMTRL_V2_DELAY_RESP_MSG 0x0900 -#define IXGBE_RXMTRL_V2_PDELAY_FOLLOWUP_MSG 0x0A00 -#define IXGBE_RXMTRL_V2_ANNOUNCE_MSG 0x0B00 -#define IXGBE_RXMTRL_V2_SIGNALLING_MSG 0x0C00 -#define IXGBE_RXMTRL_V2_MGMT_MSG 0x0D00 - -#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ -#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ -#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */ -#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */ -#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */ -#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */ -/* Receive Priority Flow Control Enable */ -#define IXGBE_FCTRL_RPFCE 0x00004000 -#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */ -#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */ -#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */ -#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */ -#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */ -#define IXGBE_MFLCN_RPFCE_MASK 0x00000FF4 /* Rx Priority FC bitmap mask */ -#define IXGBE_MFLCN_RPFCE_SHIFT 4 /* Rx Priority FC bitmap shift */ - -/* Multiple Receive Queue Control */ -#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */ -#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */ -#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */ -#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */ -#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */ -#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */ -#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */ -#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */ -#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */ -#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */ -#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */ -#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000 -#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 -#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000 -#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000 -#define IXGBE_MRQC_RSS_FIELD_IPV6_EX 0x00080000 -#define IXGBE_MRQC_RSS_FIELD_IPV6 0x00100000 -#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 -#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 -#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 -#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000 -#define IXGBE_MRQC_L3L4TXSWEN 0x00008000 - -/* Queue Drop Enable */ -#define IXGBE_QDE_ENABLE 0x00000001 -#define IXGBE_QDE_IDX_MASK 0x00007F00 -#define IXGBE_QDE_IDX_SHIFT 8 -#define IXGBE_QDE_WRITE 0x00010000 -#define IXGBE_QDE_READ 0x00020000 - -#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ -#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ -#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */ -#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */ -#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */ -#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ -#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ -#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */ - -#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000 -#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 -#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 -#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000 -#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 -/* Multiple Transmit Queue Command Register */ -#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */ -#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */ -#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */ -#define IXGBE_MTQC_32VF 0x8 /* 4 TX Queues per pool w/32VF's */ -#define IXGBE_MTQC_64VF 0x4 /* 2 TX Queues per pool w/64VF's */ -#define IXGBE_MTQC_4TC_4TQ 0x8 /* 4 TC if RT_ENA and VT_ENA */ -#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */ - -/* Receive Descriptor bit definitions */ -#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */ -#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */ -#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */ -#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */ -#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004 -#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ -#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */ -#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ -#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */ -#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */ -#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */ -#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ -#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ -#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */ -#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */ -#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */ -#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */ -#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ -#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */ -#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */ -#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */ -#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */ -#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */ -#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */ -#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */ -#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */ -#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */ -#define IXGBE_RXDADV_ERR_RXE 0x20000000 /* Any MAC Error */ -#define IXGBE_RXDADV_ERR_FCEOFE 0x80000000 /* FCoEFe/IPE */ -#define IXGBE_RXDADV_ERR_FCERR 0x00700000 /* FCERR/FDIRERR */ -#define IXGBE_RXDADV_ERR_FDIR_LEN 0x00100000 /* FDIR Length error */ -#define IXGBE_RXDADV_ERR_FDIR_DROP 0x00200000 /* FDIR Drop error */ -#define IXGBE_RXDADV_ERR_FDIR_COLL 0x00400000 /* FDIR Collision error */ -#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */ -#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */ -#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */ -#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */ -#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */ -#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */ -#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */ -#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */ -#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ -#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ -#define IXGBE_RXD_PRI_SHIFT 13 -#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */ -#define IXGBE_RXD_CFI_SHIFT 12 - -#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */ -#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */ -#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */ -#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */ -#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */ -#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */ -#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */ -#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */ -#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */ -#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */ -#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */ -#define IXGBE_RXDADV_STAT_TS 0x00010000 /* IEEE1588 Time Stamp */ - -/* PSRTYPE bit definitions */ -#define IXGBE_PSRTYPE_TCPHDR 0x00000010 -#define IXGBE_PSRTYPE_UDPHDR 0x00000020 -#define IXGBE_PSRTYPE_IPV4HDR 0x00000100 -#define IXGBE_PSRTYPE_IPV6HDR 0x00000200 -#define IXGBE_PSRTYPE_L2HDR 0x00001000 - -/* SRRCTL bit definitions */ -#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */ -#define IXGBE_SRRCTL_RDMTS_SHIFT 22 -#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000 -#define IXGBE_SRRCTL_DROP_EN 0x10000000 -#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F -#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00 -#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000 -#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 -#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 -#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 -#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 -#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000 - -#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000 -#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF - -#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F -#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0 -#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0 -#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0 -#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000 -#define IXGBE_RXDADV_RSCCNT_SHIFT 17 -#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5 -#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000 -#define IXGBE_RXDADV_SPH 0x8000 - -/* RSS Hash results */ -#define IXGBE_RXDADV_RSSTYPE_NONE 0x00000000 -#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 -#define IXGBE_RXDADV_RSSTYPE_IPV4 0x00000002 -#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 -#define IXGBE_RXDADV_RSSTYPE_IPV6_EX 0x00000004 -#define IXGBE_RXDADV_RSSTYPE_IPV6 0x00000005 -#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 -#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 -#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 -#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 - -/* RSS Packet Types as indicated in the receive descriptor. */ -#define IXGBE_RXDADV_PKTTYPE_NONE 0x00000000 -#define IXGBE_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPv4 hdr present */ -#define IXGBE_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPv4 hdr + extensions */ -#define IXGBE_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPv6 hdr present */ -#define IXGBE_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPv6 hdr + extensions */ -#define IXGBE_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ -#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ -#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ -#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ -#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ -#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ -#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ -#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ -#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ -#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ - -/* Security Processing bit Indication */ -#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000 -#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 -#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 -#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 -#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 - -/* Masks to determine if packets should be dropped due to frame errors */ -#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \ - IXGBE_RXD_ERR_CE | \ - IXGBE_RXD_ERR_LE | \ - IXGBE_RXD_ERR_PE | \ - IXGBE_RXD_ERR_OSE | \ - IXGBE_RXD_ERR_USE) - -#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \ - IXGBE_RXDADV_ERR_CE | \ - IXGBE_RXDADV_ERR_LE | \ - IXGBE_RXDADV_ERR_PE | \ - IXGBE_RXDADV_ERR_OSE | \ - IXGBE_RXDADV_ERR_USE) - -#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK_82599 IXGBE_RXDADV_ERR_RXE - -/* Multicast bit mask */ -#define IXGBE_MCSTCTRL_MFE 0x4 - -/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ -#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8 -#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8 -#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024 - -/* Vlan-specific macros */ -#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */ -#define IXGBE_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority in upper 3 bits */ -#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */ -#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT - -/* SR-IOV specific macros */ -#define IXGBE_MBVFICR_INDEX(vf_number) (vf_number >> 4) -#define IXGBE_MBVFICR(_i) (0x00710 + ((_i) * 4)) -#define IXGBE_VFLRE(_i) (((_i & 1) ? 0x001C0 : 0x00600)) -#define IXGBE_VFLREC(_i) (0x00700 + ((_i) * 4)) -/* Translated register #defines */ -#define IXGBE_PVFCTRL(P) (0x00300 + (4 * (P))) -#define IXGBE_PVFSTATUS(P) (0x00008 + (0 * (P))) -#define IXGBE_PVFLINKS(P) (0x042A4 + (0 * (P))) -#define IXGBE_PVFRTIMER(P) (0x00048 + (0 * (P))) -#define IXGBE_PVFMAILBOX(P) (0x04C00 + (4 * (P))) -#define IXGBE_PVFRXMEMWRAP(P) (0x03190 + (0 * (P))) -#define IXGBE_PVTEICR(P) (0x00B00 + (4 * (P))) -#define IXGBE_PVTEICS(P) (0x00C00 + (4 * (P))) -#define IXGBE_PVTEIMS(P) (0x00D00 + (4 * (P))) -#define IXGBE_PVTEIMC(P) (0x00E00 + (4 * (P))) -#define IXGBE_PVTEIAC(P) (0x00F00 + (4 * (P))) -#define IXGBE_PVTEIAM(P) (0x04D00 + (4 * (P))) -#define IXGBE_PVTEITR(P) (((P) < 24) ? (0x00820 + ((P) * 4)) : \ - (0x012300 + (((P) - 24) * 4))) -#define IXGBE_PVTIVAR(P) (0x12500 + (4 * (P))) -#define IXGBE_PVTIVAR_MISC(P) (0x04E00 + (4 * (P))) -#define IXGBE_PVTRSCINT(P) (0x12000 + (4 * (P))) -#define IXGBE_VFPBACL(P) (0x110C8 + (4 * (P))) -#define IXGBE_PVFRDBAL(P) ((P < 64) ? (0x01000 + (0x40 * (P))) \ - : (0x0D000 + (0x40 * ((P) - 64)))) -#define IXGBE_PVFRDBAH(P) ((P < 64) ? (0x01004 + (0x40 * (P))) \ - : (0x0D004 + (0x40 * ((P) - 64)))) -#define IXGBE_PVFRDLEN(P) ((P < 64) ? (0x01008 + (0x40 * (P))) \ - : (0x0D008 + (0x40 * ((P) - 64)))) -#define IXGBE_PVFRDH(P) ((P < 64) ? (0x01010 + (0x40 * (P))) \ - : (0x0D010 + (0x40 * ((P) - 64)))) -#define IXGBE_PVFRDT(P) ((P < 64) ? (0x01018 + (0x40 * (P))) \ - : (0x0D018 + (0x40 * ((P) - 64)))) -#define IXGBE_PVFRXDCTL(P) ((P < 64) ? (0x01028 + (0x40 * (P))) \ - : (0x0D028 + (0x40 * ((P) - 64)))) -#define IXGBE_PVFSRRCTL(P) ((P < 64) ? (0x01014 + (0x40 * (P))) \ - : (0x0D014 + (0x40 * ((P) - 64)))) -#define IXGBE_PVFPSRTYPE(P) (0x0EA00 + (4 * (P))) -#define IXGBE_PVFTDBAL(P) (0x06000 + (0x40 * (P))) -#define IXGBE_PVFTDBAH(P) (0x06004 + (0x40 * (P))) -#define IXGBE_PVFTTDLEN(P) (0x06008 + (0x40 * (P))) -#define IXGBE_PVFTDH(P) (0x06010 + (0x40 * (P))) -#define IXGBE_PVFTDT(P) (0x06018 + (0x40 * (P))) -#define IXGBE_PVFTXDCTL(P) (0x06028 + (0x40 * (P))) -#define IXGBE_PVFTDWBAL(P) (0x06038 + (0x40 * (P))) -#define IXGBE_PVFTDWBAH(P) (0x0603C + (0x40 * (P))) -#define IXGBE_PVFDCA_RXCTRL(P) (((P) < 64) ? (0x0100C + (0x40 * (P))) \ - : (0x0D00C + (0x40 * ((P) - 64)))) -#define IXGBE_PVFDCA_TXCTRL(P) (0x0600C + (0x40 * (P))) -#define IXGBE_PVFGPRC(x) (0x0101C + (0x40 * (x))) -#define IXGBE_PVFGPTC(x) (0x08300 + (0x04 * (x))) -#define IXGBE_PVFGORC_LSB(x) (0x01020 + (0x40 * (x))) -#define IXGBE_PVFGORC_MSB(x) (0x0D020 + (0x40 * (x))) -#define IXGBE_PVFGOTC_LSB(x) (0x08400 + (0x08 * (x))) -#define IXGBE_PVFGOTC_MSB(x) (0x08404 + (0x08 * (x))) -#define IXGBE_PVFMPRC(x) (0x0D01C + (0x40 * (x))) - -#define IXGBE_PVFTDWBALn(q_per_pool, vf_number, vf_q_index) \ - (IXGBE_PVFTDWBAL((q_per_pool)*(vf_number) + (vf_q_index))) -#define IXGBE_PVFTDWBAHn(q_per_pool, vf_number, vf_q_index) \ - (IXGBE_PVFTDWBAH((q_per_pool)*(vf_number) + (vf_q_index))) - -/* Little Endian defines */ -#ifndef __le16 -#define __le16 u16 -#endif -#ifndef __le32 -#define __le32 u32 -#endif -#ifndef __le64 -#define __le64 u64 - -#endif -#ifndef __be16 -/* Big Endian defines */ -#define __be16 u16 -#define __be32 u32 -#define __be64 u64 - -#endif -enum ixgbe_fdir_pballoc_type { - IXGBE_FDIR_PBALLOC_NONE = 0, - IXGBE_FDIR_PBALLOC_64K = 1, - IXGBE_FDIR_PBALLOC_128K = 2, - IXGBE_FDIR_PBALLOC_256K = 3, -}; - -/* Flow Director register values */ -#define IXGBE_FDIRCTRL_PBALLOC_64K 0x00000001 -#define IXGBE_FDIRCTRL_PBALLOC_128K 0x00000002 -#define IXGBE_FDIRCTRL_PBALLOC_256K 0x00000003 -#define IXGBE_FDIRCTRL_INIT_DONE 0x00000008 -#define IXGBE_FDIRCTRL_PERFECT_MATCH 0x00000010 -#define IXGBE_FDIRCTRL_REPORT_STATUS 0x00000020 -#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS 0x00000080 -#define IXGBE_FDIRCTRL_DROP_Q_SHIFT 8 -#define IXGBE_FDIRCTRL_FLEX_SHIFT 16 -#define IXGBE_FDIRCTRL_SEARCHLIM 0x00800000 -#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT 24 -#define IXGBE_FDIRCTRL_FULL_THRESH_MASK 0xF0000000 -#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT 28 - -#define IXGBE_FDIRTCPM_DPORTM_SHIFT 16 -#define IXGBE_FDIRUDPM_DPORTM_SHIFT 16 -#define IXGBE_FDIRIP6M_DIPM_SHIFT 16 -#define IXGBE_FDIRM_VLANID 0x00000001 -#define IXGBE_FDIRM_VLANP 0x00000002 -#define IXGBE_FDIRM_POOL 0x00000004 -#define IXGBE_FDIRM_L4P 0x00000008 -#define IXGBE_FDIRM_FLEX 0x00000010 -#define IXGBE_FDIRM_DIPv6 0x00000020 - -#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF -#define IXGBE_FDIRFREE_FREE_SHIFT 0 -#define IXGBE_FDIRFREE_COLL_MASK 0x7FFF0000 -#define IXGBE_FDIRFREE_COLL_SHIFT 16 -#define IXGBE_FDIRLEN_MAXLEN_MASK 0x3F -#define IXGBE_FDIRLEN_MAXLEN_SHIFT 0 -#define IXGBE_FDIRLEN_MAXHASH_MASK 0x7FFF0000 -#define IXGBE_FDIRLEN_MAXHASH_SHIFT 16 -#define IXGBE_FDIRUSTAT_ADD_MASK 0xFFFF -#define IXGBE_FDIRUSTAT_ADD_SHIFT 0 -#define IXGBE_FDIRUSTAT_REMOVE_MASK 0xFFFF0000 -#define IXGBE_FDIRUSTAT_REMOVE_SHIFT 16 -#define IXGBE_FDIRFSTAT_FADD_MASK 0x00FF -#define IXGBE_FDIRFSTAT_FADD_SHIFT 0 -#define IXGBE_FDIRFSTAT_FREMOVE_MASK 0xFF00 -#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT 8 -#define IXGBE_FDIRPORT_DESTINATION_SHIFT 16 -#define IXGBE_FDIRVLAN_FLEX_SHIFT 16 -#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT 15 -#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT 16 - -#define IXGBE_FDIRCMD_CMD_MASK 0x00000003 -#define IXGBE_FDIRCMD_CMD_ADD_FLOW 0x00000001 -#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW 0x00000002 -#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT 0x00000003 -#define IXGBE_FDIRCMD_FILTER_VALID 0x00000004 -#define IXGBE_FDIRCMD_FILTER_UPDATE 0x00000008 -#define IXGBE_FDIRCMD_IPv6DMATCH 0x00000010 -#define IXGBE_FDIRCMD_L4TYPE_UDP 0x00000020 -#define IXGBE_FDIRCMD_L4TYPE_TCP 0x00000040 -#define IXGBE_FDIRCMD_L4TYPE_SCTP 0x00000060 -#define IXGBE_FDIRCMD_IPV6 0x00000080 -#define IXGBE_FDIRCMD_CLEARHT 0x00000100 -#define IXGBE_FDIRCMD_DROP 0x00000200 -#define IXGBE_FDIRCMD_INT 0x00000400 -#define IXGBE_FDIRCMD_LAST 0x00000800 -#define IXGBE_FDIRCMD_COLLISION 0x00001000 -#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000 -#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5 -#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16 -#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24 -#define IXGBE_FDIR_INIT_DONE_POLL 10 -#define IXGBE_FDIRCMD_CMD_POLL 10 - -#define IXGBE_FDIR_DROP_QUEUE 127 - -#define IXGBE_STATUS_OVERHEATING_BIT 20 /* STATUS overtemp bit num */ - -/* Manageablility Host Interface defines */ -#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ -#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ -#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */ - -/* CEM Support */ -#define FW_CEM_HDR_LEN 0x4 -#define FW_CEM_CMD_DRIVER_INFO 0xDD -#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5 -#define FW_CEM_CMD_RESERVED 0X0 -#define FW_CEM_UNUSED_VER 0x0 -#define FW_CEM_MAX_RETRIES 3 -#define FW_CEM_RESP_STATUS_SUCCESS 0x1 - -/* Host Interface Command Structures */ - -struct ixgbe_hic_hdr { - u8 cmd; - u8 buf_len; - union { - u8 cmd_resv; - u8 ret_status; - } cmd_or_resp; - u8 checksum; -}; - -struct ixgbe_hic_drv_info { - struct ixgbe_hic_hdr hdr; - u8 port_num; - u8 ver_sub; - u8 ver_build; - u8 ver_min; - u8 ver_maj; - u8 pad; /* end spacing to ensure length is mult. of dword */ - u16 pad2; /* end spacing to ensure length is mult. of dword2 */ -}; - -/* Transmit Descriptor - Legacy */ -struct ixgbe_legacy_tx_desc { - u64 buffer_addr; /* Address of the descriptor's data buffer */ - union { - __le32 data; - struct { - __le16 length; /* Data buffer length */ - u8 cso; /* Checksum offset */ - u8 cmd; /* Descriptor control */ - } flags; - } lower; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 css; /* Checksum start */ - __le16 vlan; - } fields; - } upper; -}; - -/* Transmit Descriptor - Advanced */ -union ixgbe_adv_tx_desc { - struct { - __le64 buffer_addr; /* Address of descriptor's data buf */ - __le32 cmd_type_len; - __le32 olinfo_status; - } read; - struct { - __le64 rsvd; /* Reserved */ - __le32 nxtseq_seed; - __le32 status; - } wb; -}; - -/* Receive Descriptor - Legacy */ -struct ixgbe_legacy_rx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 length; /* Length of data DMAed into data buffer */ - __le16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ - __le16 vlan; -}; - -/* Receive Descriptor - Advanced */ -union ixgbe_adv_rx_desc { - struct { - __le64 pkt_addr; /* Packet buffer address */ - __le64 hdr_addr; /* Header buffer address */ - } read; - struct { - struct { - union { - __le32 data; - struct { - __le16 pkt_info; /* RSS, Pkt type */ - __le16 hdr_info; /* Splithdr, hdrlen */ - } hs_rss; - } lo_dword; - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length; /* Packet length */ - __le16 vlan; /* VLAN tag */ - } upper; - } wb; /* writeback */ -}; - -/* Context descriptors */ -struct ixgbe_adv_tx_context_desc { - __le32 vlan_macip_lens; - __le32 seqnum_seed; - __le32 type_tucmd_mlhl; - __le32 mss_l4len_idx; -}; - -/* Adv Transmit Descriptor Config Masks */ -#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */ -#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */ -#define IXGBE_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 time stamp */ -#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */ -#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */ -#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */ -#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Adv Context Desc */ -#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Adv Data Descriptor */ -#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */ -#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */ -#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */ -#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ -#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext 1=Adv */ -#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */ -#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ -#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */ -#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED pres in WB */ -#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */ -#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ -#define IXGBE_ADVTXD_CC 0x00000080 /* Check Context */ -#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */ -#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \ - IXGBE_ADVTXD_POPTS_SHIFT) -#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \ - IXGBE_ADVTXD_POPTS_SHIFT) -#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ -#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ -#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ -/* 1st&Last TSO-full iSCSI PDU */ -#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 -#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */ -#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ -#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ -#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ -#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ -#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ -#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ -#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ -#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ -#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /* req Markers and CRC */ -#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ -#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ -#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */ -#define IXGBE_ADVTXT_TUCMD_FCOE 0x00008000 /* FCoE Frame Type */ -#define IXGBE_ADVTXD_FCOEF_EOF_MASK (0x3 << 10) /* FC EOF index */ -#define IXGBE_ADVTXD_FCOEF_SOF ((1 << 2) << 10) /* FC SOF index */ -#define IXGBE_ADVTXD_FCOEF_PARINC ((1 << 3) << 10) /* Rel_Off in F_CTL */ -#define IXGBE_ADVTXD_FCOEF_ORIE ((1 << 4) << 10) /* Orientation End */ -#define IXGBE_ADVTXD_FCOEF_ORIS ((1 << 5) << 10) /* Orientation Start */ -#define IXGBE_ADVTXD_FCOEF_EOF_N (0x0 << 10) /* 00: EOFn */ -#define IXGBE_ADVTXD_FCOEF_EOF_T (0x1 << 10) /* 01: EOFt */ -#define IXGBE_ADVTXD_FCOEF_EOF_NI (0x2 << 10) /* 10: EOFni */ -#define IXGBE_ADVTXD_FCOEF_EOF_A (0x3 << 10) /* 11: EOFa */ -#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ -#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ - -/* Autonegotiation advertised speeds */ -typedef u32 ixgbe_autoneg_advertised; -/* Link speed */ -typedef u32 ixgbe_link_speed; -#define IXGBE_LINK_SPEED_UNKNOWN 0 -#define IXGBE_LINK_SPEED_100_FULL 0x0008 -#define IXGBE_LINK_SPEED_1GB_FULL 0x0020 -#define IXGBE_LINK_SPEED_10GB_FULL 0x0080 -#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \ - IXGBE_LINK_SPEED_10GB_FULL) -#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \ - IXGBE_LINK_SPEED_1GB_FULL | \ - IXGBE_LINK_SPEED_10GB_FULL) - - -/* Physical layer type */ -typedef u32 ixgbe_physical_layer; -#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0 -#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001 -#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002 -#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004 -#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008 -#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010 -#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020 -#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040 -#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080 -#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100 -#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200 -#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400 -#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800 -#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000 -#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000 -#define IXGBE_PHYSICAL_LAYER_1000BASE_SX 0x4000 - -/* Flow Control Data Sheet defined values - * Calculation and defines taken from 802.1bb Annex O - */ - -/* BitTimes (BT) conversion */ -#define IXGBE_BT2KB(BT) ((BT + (8 * 1024 - 1)) / (8 * 1024)) -#define IXGBE_B2BT(BT) (BT * 8) - -/* Calculate Delay to respond to PFC */ -#define IXGBE_PFC_D 672 - -/* Calculate Cable Delay */ -#define IXGBE_CABLE_DC 5556 /* Delay Copper */ -#define IXGBE_CABLE_DO 5000 /* Delay Optical */ - -/* Calculate Interface Delay X540 */ -#define IXGBE_PHY_DC 25600 /* Delay 10G BASET */ -#define IXGBE_MAC_DC 8192 /* Delay Copper XAUI interface */ -#define IXGBE_XAUI_DC (2 * 2048) /* Delay Copper Phy */ - -#define IXGBE_ID_X540 (IXGBE_MAC_DC + IXGBE_XAUI_DC + IXGBE_PHY_DC) - -/* Calculate Interface Delay 82598, 82599 */ -#define IXGBE_PHY_D 12800 -#define IXGBE_MAC_D 4096 -#define IXGBE_XAUI_D (2 * 1024) - -#define IXGBE_ID (IXGBE_MAC_D + IXGBE_XAUI_D + IXGBE_PHY_D) - -/* Calculate Delay incurred from higher layer */ -#define IXGBE_HD 6144 - -/* Calculate PCI Bus delay for low thresholds */ -#define IXGBE_PCI_DELAY 10000 - -/* Calculate X540 delay value in bit times */ -#define IXGBE_DV_X540(_max_frame_link, _max_frame_tc) \ - ((36 * \ - (IXGBE_B2BT(_max_frame_link) + \ - IXGBE_PFC_D + \ - (2 * IXGBE_CABLE_DC) + \ - (2 * IXGBE_ID_X540) + \ - IXGBE_HD) / 25 + 1) + \ - 2 * IXGBE_B2BT(_max_frame_tc)) - -/* Calculate 82599, 82598 delay value in bit times */ -#define IXGBE_DV(_max_frame_link, _max_frame_tc) \ - ((36 * \ - (IXGBE_B2BT(_max_frame_link) + \ - IXGBE_PFC_D + \ - (2 * IXGBE_CABLE_DC) + \ - (2 * IXGBE_ID) + \ - IXGBE_HD) / 25 + 1) + \ - 2 * IXGBE_B2BT(_max_frame_tc)) - -/* Calculate low threshold delay values */ -#define IXGBE_LOW_DV_X540(_max_frame_tc) \ - (2 * IXGBE_B2BT(_max_frame_tc) + \ - (36 * IXGBE_PCI_DELAY / 25) + 1) -#define IXGBE_LOW_DV(_max_frame_tc) \ - (2 * IXGBE_LOW_DV_X540(_max_frame_tc)) - -/* Software ATR hash keys */ -#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2 -#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614 - -/* Software ATR input stream values and masks */ -#define IXGBE_ATR_HASH_MASK 0x7fff -#define IXGBE_ATR_L4TYPE_MASK 0x3 -#define IXGBE_ATR_L4TYPE_UDP 0x1 -#define IXGBE_ATR_L4TYPE_TCP 0x2 -#define IXGBE_ATR_L4TYPE_SCTP 0x3 -#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4 -enum ixgbe_atr_flow_type { - IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0, - IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1, - IXGBE_ATR_FLOW_TYPE_TCPV4 = 0x2, - IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3, - IXGBE_ATR_FLOW_TYPE_IPV6 = 0x4, - IXGBE_ATR_FLOW_TYPE_UDPV6 = 0x5, - IXGBE_ATR_FLOW_TYPE_TCPV6 = 0x6, - IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7, -}; - -/* Flow Director ATR input struct. */ -union ixgbe_atr_input { - /* - * Byte layout in order, all values with MSB first: - * - * vm_pool - 1 byte - * flow_type - 1 byte - * vlan_id - 2 bytes - * src_ip - 16 bytes - * dst_ip - 16 bytes - * src_port - 2 bytes - * dst_port - 2 bytes - * flex_bytes - 2 bytes - * bkt_hash - 2 bytes - */ - struct { - u8 vm_pool; - u8 flow_type; - __be16 vlan_id; - __be32 dst_ip[4]; - __be32 src_ip[4]; - __be16 src_port; - __be16 dst_port; - __be16 flex_bytes; - __be16 bkt_hash; - } formatted; - __be32 dword_stream[11]; -}; - -/* Flow Director compressed ATR hash input struct */ -union ixgbe_atr_hash_dword { - struct { - u8 vm_pool; - u8 flow_type; - __be16 vlan_id; - } formatted; - __be32 ip; - struct { - __be16 src; - __be16 dst; - } port; - __be16 flex_bytes; - __be32 dword; -}; - - -/* - * Unavailable: The FCoE Boot Option ROM is not present in the flash. - * Disabled: Present; boot order is not set for any targets on the port. - * Enabled: Present; boot order is set for at least one target on the port. - */ -enum ixgbe_fcoe_boot_status { - ixgbe_fcoe_bootstatus_disabled = 0, - ixgbe_fcoe_bootstatus_enabled = 1, - ixgbe_fcoe_bootstatus_unavailable = 0xFFFF -}; - -enum ixgbe_eeprom_type { - ixgbe_eeprom_uninitialized = 0, - ixgbe_eeprom_spi, - ixgbe_flash, - ixgbe_eeprom_none /* No NVM support */ -}; - -enum ixgbe_mac_type { - ixgbe_mac_unknown = 0, - ixgbe_mac_82598EB, - ixgbe_mac_82599EB, - ixgbe_mac_X540, - ixgbe_num_macs -}; - -enum ixgbe_phy_type { - ixgbe_phy_unknown = 0, - ixgbe_phy_none, - ixgbe_phy_tn, - ixgbe_phy_aq, - ixgbe_phy_cu_unknown, - ixgbe_phy_qt, - ixgbe_phy_xaui, - ixgbe_phy_nl, - ixgbe_phy_sfp_passive_tyco, - ixgbe_phy_sfp_passive_unknown, - ixgbe_phy_sfp_active_unknown, - ixgbe_phy_sfp_avago, - ixgbe_phy_sfp_ftl, - ixgbe_phy_sfp_ftl_active, - ixgbe_phy_sfp_unknown, - ixgbe_phy_sfp_intel, - ixgbe_phy_sfp_unsupported, /*Enforce bit set with unsupported module*/ - ixgbe_phy_generic -}; - -/* - * SFP+ module type IDs: - * - * ID Module Type - * ============= - * 0 SFP_DA_CU - * 1 SFP_SR - * 2 SFP_LR - * 3 SFP_DA_CU_CORE0 - 82599-specific - * 4 SFP_DA_CU_CORE1 - 82599-specific - * 5 SFP_SR/LR_CORE0 - 82599-specific - * 6 SFP_SR/LR_CORE1 - 82599-specific - */ -enum ixgbe_sfp_type { - ixgbe_sfp_type_da_cu = 0, - ixgbe_sfp_type_sr = 1, - ixgbe_sfp_type_lr = 2, - ixgbe_sfp_type_da_cu_core0 = 3, - ixgbe_sfp_type_da_cu_core1 = 4, - ixgbe_sfp_type_srlr_core0 = 5, - ixgbe_sfp_type_srlr_core1 = 6, - ixgbe_sfp_type_da_act_lmt_core0 = 7, - ixgbe_sfp_type_da_act_lmt_core1 = 8, - ixgbe_sfp_type_1g_cu_core0 = 9, - ixgbe_sfp_type_1g_cu_core1 = 10, - ixgbe_sfp_type_1g_sx_core0 = 11, - ixgbe_sfp_type_1g_sx_core1 = 12, - ixgbe_sfp_type_not_present = 0xFFFE, - ixgbe_sfp_type_unknown = 0xFFFF -}; - -enum ixgbe_media_type { - ixgbe_media_type_unknown = 0, - ixgbe_media_type_fiber, - ixgbe_media_type_fiber_qsfp, - ixgbe_media_type_fiber_lco, - ixgbe_media_type_copper, - ixgbe_media_type_backplane, - ixgbe_media_type_cx4, - ixgbe_media_type_virtual -}; - -/* Flow Control Settings */ -enum ixgbe_fc_mode { - ixgbe_fc_none = 0, - ixgbe_fc_rx_pause, - ixgbe_fc_tx_pause, - ixgbe_fc_full, - ixgbe_fc_default -}; - -/* Smart Speed Settings */ -#define IXGBE_SMARTSPEED_MAX_RETRIES 3 -enum ixgbe_smart_speed { - ixgbe_smart_speed_auto = 0, - ixgbe_smart_speed_on, - ixgbe_smart_speed_off -}; - -/* PCI bus types */ -enum ixgbe_bus_type { - ixgbe_bus_type_unknown = 0, - ixgbe_bus_type_pci, - ixgbe_bus_type_pcix, - ixgbe_bus_type_pci_express, - ixgbe_bus_type_reserved -}; - -/* PCI bus speeds */ -enum ixgbe_bus_speed { - ixgbe_bus_speed_unknown = 0, - ixgbe_bus_speed_33 = 33, - ixgbe_bus_speed_66 = 66, - ixgbe_bus_speed_100 = 100, - ixgbe_bus_speed_120 = 120, - ixgbe_bus_speed_133 = 133, - ixgbe_bus_speed_2500 = 2500, - ixgbe_bus_speed_5000 = 5000, - ixgbe_bus_speed_8000 = 8000, - ixgbe_bus_speed_reserved -}; - -/* PCI bus widths */ -enum ixgbe_bus_width { - ixgbe_bus_width_unknown = 0, - ixgbe_bus_width_pcie_x1 = 1, - ixgbe_bus_width_pcie_x2 = 2, - ixgbe_bus_width_pcie_x4 = 4, - ixgbe_bus_width_pcie_x8 = 8, - ixgbe_bus_width_32 = 32, - ixgbe_bus_width_64 = 64, - ixgbe_bus_width_reserved -}; - -struct ixgbe_addr_filter_info { - u32 num_mc_addrs; - u32 rar_used_count; - u32 mta_in_use; - u32 overflow_promisc; - bool user_set_promisc; -}; - -/* Bus parameters */ -struct ixgbe_bus_info { - enum ixgbe_bus_speed speed; - enum ixgbe_bus_width width; - enum ixgbe_bus_type type; - - u16 func; - u16 lan_id; -}; - -/* Flow control parameters */ -struct ixgbe_fc_info { - u32 high_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl High-water */ - u32 low_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl Low-water */ - u16 pause_time; /* Flow Control Pause timer */ - bool send_xon; /* Flow control send XON */ - bool strict_ieee; /* Strict IEEE mode */ - bool disable_fc_autoneg; /* Do not autonegotiate FC */ - bool fc_was_autonegged; /* Is current_mode the result of autonegging? */ - enum ixgbe_fc_mode current_mode; /* FC mode in effect */ - enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */ -}; - -/* Statistics counters collected by the MAC */ -struct ixgbe_hw_stats { - u64 crcerrs; - u64 illerrc; - u64 errbc; - u64 mspdc; - u64 mpctotal; - u64 mpc[8]; - u64 mlfc; - u64 mrfc; - u64 rlec; - u64 lxontxc; - u64 lxonrxc; - u64 lxofftxc; - u64 lxoffrxc; - u64 pxontxc[8]; - u64 pxonrxc[8]; - u64 pxofftxc[8]; - u64 pxoffrxc[8]; - u64 prc64; - u64 prc127; - u64 prc255; - u64 prc511; - u64 prc1023; - u64 prc1522; - u64 gprc; - u64 bprc; - u64 mprc; - u64 gptc; - u64 gorc; - u64 gotc; - u64 rnbc[8]; - u64 ruc; - u64 rfc; - u64 roc; - u64 rjc; - u64 mngprc; - u64 mngpdc; - u64 mngptc; - u64 tor; - u64 tpr; - u64 tpt; - u64 ptc64; - u64 ptc127; - u64 ptc255; - u64 ptc511; - u64 ptc1023; - u64 ptc1522; - u64 mptc; - u64 bptc; - u64 xec; - u64 qprc[16]; - u64 qptc[16]; - u64 qbrc[16]; - u64 qbtc[16]; - u64 qprdc[16]; - u64 pxon2offc[8]; - u64 fdirustat_add; - u64 fdirustat_remove; - u64 fdirfstat_fadd; - u64 fdirfstat_fremove; - u64 fdirmatch; - u64 fdirmiss; - u64 fccrc; - u64 fclast; - u64 fcoerpdc; - u64 fcoeprc; - u64 fcoeptc; - u64 fcoedwrc; - u64 fcoedwtc; - u64 fcoe_noddp; - u64 fcoe_noddp_ext_buff; - u64 ldpcec; - u64 pcrc8ec; - u64 b2ospc; - u64 b2ogprc; - u64 o2bgptc; - u64 o2bspc; -}; - -/* forward declaration */ -struct ixgbe_hw; - -/* iterator type for walking multicast address lists */ -typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr, - u32 *vmdq); - -/* Function pointer table */ -struct ixgbe_eeprom_operations { - s32 (*init_params)(struct ixgbe_hw *); - s32 (*read)(struct ixgbe_hw *, u16, u16 *); - s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *); - s32 (*write)(struct ixgbe_hw *, u16, u16); - s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *); - s32 (*validate_checksum)(struct ixgbe_hw *, u16 *); - s32 (*update_checksum)(struct ixgbe_hw *); - u16 (*calc_checksum)(struct ixgbe_hw *); -}; - -struct ixgbe_mac_operations { - s32 (*init_hw)(struct ixgbe_hw *); - s32 (*reset_hw)(struct ixgbe_hw *); - s32 (*start_hw)(struct ixgbe_hw *); - s32 (*clear_hw_cntrs)(struct ixgbe_hw *); - enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); - u32 (*get_supported_physical_layer)(struct ixgbe_hw *); - s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *); - s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *); - s32 (*set_san_mac_addr)(struct ixgbe_hw *, u8 *); - s32 (*get_device_caps)(struct ixgbe_hw *, u16 *); - s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *); - s32 (*get_fcoe_boot_status)(struct ixgbe_hw *, u16 *); - s32 (*stop_adapter)(struct ixgbe_hw *); - s32 (*get_bus_info)(struct ixgbe_hw *); - void (*set_lan_id)(struct ixgbe_hw *); - s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*); - s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8); - s32 (*setup_sfp)(struct ixgbe_hw *); - s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); - s32 (*disable_sec_rx_path)(struct ixgbe_hw *); - s32 (*enable_sec_rx_path)(struct ixgbe_hw *); - s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u16); - void (*release_swfw_sync)(struct ixgbe_hw *, u16); - - /* Link */ - void (*disable_tx_laser)(struct ixgbe_hw *); - void (*enable_tx_laser)(struct ixgbe_hw *); - void (*flap_tx_laser)(struct ixgbe_hw *); - s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); - s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); - s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, - bool *); - - /* Packet Buffer manipulation */ - void (*setup_rxpba)(struct ixgbe_hw *, int, u32, int); - - /* LED */ - s32 (*led_on)(struct ixgbe_hw *, u32); - s32 (*led_off)(struct ixgbe_hw *, u32); - s32 (*blink_led_start)(struct ixgbe_hw *, u32); - s32 (*blink_led_stop)(struct ixgbe_hw *, u32); - - /* RAR, Multicast, VLAN */ - s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32); - s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *); - s32 (*clear_rar)(struct ixgbe_hw *, u32); - s32 (*insert_mac_addr)(struct ixgbe_hw *, u8 *, u32); - s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32); - s32 (*set_vmdq_san_mac)(struct ixgbe_hw *, u32); - s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32); - s32 (*init_rx_addrs)(struct ixgbe_hw *); - s32 (*update_uc_addr_list)(struct ixgbe_hw *, u8 *, u32, - ixgbe_mc_addr_itr); - s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32, - ixgbe_mc_addr_itr, bool clear); - s32 (*enable_mc)(struct ixgbe_hw *); - s32 (*disable_mc)(struct ixgbe_hw *); - s32 (*clear_vfta)(struct ixgbe_hw *); - s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool); - s32 (*set_vlvf)(struct ixgbe_hw *, u32, u32, bool, bool *); - s32 (*init_uta_tables)(struct ixgbe_hw *); - void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int); - void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int); - - /* Flow Control */ - s32 (*fc_enable)(struct ixgbe_hw *); - - /* Manageability interface */ - s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8); - s32 (*get_thermal_sensor_data)(struct ixgbe_hw *); - s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw); -}; - -struct ixgbe_phy_operations { - s32 (*identify)(struct ixgbe_hw *); - s32 (*identify_sfp)(struct ixgbe_hw *); - s32 (*init)(struct ixgbe_hw *); - s32 (*reset)(struct ixgbe_hw *); - s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); - s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); - s32 (*setup_link)(struct ixgbe_hw *); - s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool, - bool); - s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); - s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); - s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *); - s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8); - s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *); - s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8); - void (*i2c_bus_clear)(struct ixgbe_hw *); - s32 (*check_overtemp)(struct ixgbe_hw *); -}; - -struct ixgbe_eeprom_info { - struct ixgbe_eeprom_operations ops; - enum ixgbe_eeprom_type type; - u32 semaphore_delay; - u16 word_size; - u16 address_bits; - u16 word_page_size; -}; - -#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01 -struct ixgbe_mac_info { - struct ixgbe_mac_operations ops; - enum ixgbe_mac_type type; - u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; - u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; - u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; - /* prefix for World Wide Node Name (WWNN) */ - u16 wwnn_prefix; - /* prefix for World Wide Port Name (WWPN) */ - u16 wwpn_prefix; -#define IXGBE_MAX_MTA 128 - u32 mta_shadow[IXGBE_MAX_MTA]; - s32 mc_filter_type; - u32 mcft_size; - u32 vft_size; - u32 num_rar_entries; - u32 rar_highwater; - u32 rx_pb_size; - u32 max_tx_queues; - u32 max_rx_queues; - u32 orig_autoc; - u8 san_mac_rar_index; - u32 orig_autoc2; - u16 max_msix_vectors; - bool arc_subsystem_valid; - bool orig_link_settings_stored; - bool autotry_restart; - u8 flags; - struct ixgbe_thermal_sensor_data thermal_sensor_data; -}; - -struct ixgbe_phy_info { - struct ixgbe_phy_operations ops; - enum ixgbe_phy_type type; - u32 addr; - u32 id; - enum ixgbe_sfp_type sfp_type; - bool sfp_setup_needed; - u32 revision; - enum ixgbe_media_type media_type; - bool reset_disable; - ixgbe_autoneg_advertised autoneg_advertised; - enum ixgbe_smart_speed smart_speed; - bool smart_speed_active; - bool multispeed_fiber; - bool reset_if_overtemp; - bool qsfp_shared_i2c_bus; -}; - -#include "ixgbe_mbx.h" - -struct ixgbe_mbx_operations { - void (*init_params)(struct ixgbe_hw *hw); - s32 (*read)(struct ixgbe_hw *, u32 *, u16, u16); - s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16); - s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16, u16); - s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16); - s32 (*check_for_msg)(struct ixgbe_hw *, u16); - s32 (*check_for_ack)(struct ixgbe_hw *, u16); - s32 (*check_for_rst)(struct ixgbe_hw *, u16); -}; - -struct ixgbe_mbx_stats { - u32 msgs_tx; - u32 msgs_rx; - - u32 acks; - u32 reqs; - u32 rsts; -}; - -struct ixgbe_mbx_info { - struct ixgbe_mbx_operations ops; - struct ixgbe_mbx_stats stats; - u32 timeout; - u32 udelay; - u32 v2p_mailbox; - u16 size; -}; - -struct ixgbe_hw { - u8 __iomem *hw_addr; - void *back; - struct ixgbe_mac_info mac; - struct ixgbe_addr_filter_info addr_ctrl; - struct ixgbe_fc_info fc; - struct ixgbe_phy_info phy; - struct ixgbe_eeprom_info eeprom; - struct ixgbe_bus_info bus; - struct ixgbe_mbx_info mbx; - u16 device_id; - u16 vendor_id; - u16 subsystem_device_id; - u16 subsystem_vendor_id; - u8 revision_id; - bool adapter_stopped; - bool force_full_reset; - bool allow_unsupported_sfp; -}; - -#define ixgbe_call_func(hw, func, params, error) \ - (func != NULL) ? func params : error - - -/* Error Codes */ -#define IXGBE_ERR_EEPROM -1 -#define IXGBE_ERR_EEPROM_CHECKSUM -2 -#define IXGBE_ERR_PHY -3 -#define IXGBE_ERR_CONFIG -4 -#define IXGBE_ERR_PARAM -5 -#define IXGBE_ERR_MAC_TYPE -6 -#define IXGBE_ERR_UNKNOWN_PHY -7 -#define IXGBE_ERR_LINK_SETUP -8 -#define IXGBE_ERR_ADAPTER_STOPPED -9 -#define IXGBE_ERR_INVALID_MAC_ADDR -10 -#define IXGBE_ERR_DEVICE_NOT_SUPPORTED -11 -#define IXGBE_ERR_MASTER_REQUESTS_PENDING -12 -#define IXGBE_ERR_INVALID_LINK_SETTINGS -13 -#define IXGBE_ERR_AUTONEG_NOT_COMPLETE -14 -#define IXGBE_ERR_RESET_FAILED -15 -#define IXGBE_ERR_SWFW_SYNC -16 -#define IXGBE_ERR_PHY_ADDR_INVALID -17 -#define IXGBE_ERR_I2C -18 -#define IXGBE_ERR_SFP_NOT_SUPPORTED -19 -#define IXGBE_ERR_SFP_NOT_PRESENT -20 -#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21 -#define IXGBE_ERR_NO_SAN_ADDR_PTR -22 -#define IXGBE_ERR_FDIR_REINIT_FAILED -23 -#define IXGBE_ERR_EEPROM_VERSION -24 -#define IXGBE_ERR_NO_SPACE -25 -#define IXGBE_ERR_OVERTEMP -26 -#define IXGBE_ERR_FC_NOT_NEGOTIATED -27 -#define IXGBE_ERR_FC_NOT_SUPPORTED -28 -#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 -#define IXGBE_ERR_PBA_SECTION -31 -#define IXGBE_ERR_INVALID_ARGUMENT -32 -#define IXGBE_ERR_HOST_INTERFACE_COMMAND -33 -#define IXGBE_ERR_OUT_OF_MEM -34 - -#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF - -#define UNREFERENCED_XPARAMETER - -#endif /* _IXGBE_TYPE_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c deleted file mode 100644 index 07b219a1c4..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c +++ /dev/null @@ -1,922 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_x540.h" -#include "ixgbe_type.h" -#include "ixgbe_api.h" -#include "ixgbe_common.h" -#include "ixgbe_phy.h" - -static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw); -static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw); -static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); -static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); - -/** - * ixgbe_init_ops_X540 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure - * - * Initialize the function pointers and assign the MAC type for X540. - * Does not touch the hardware. - **/ -s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - struct ixgbe_phy_info *phy = &hw->phy; - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - s32 ret_val; - - ret_val = ixgbe_init_phy_ops_generic(hw); - ret_val = ixgbe_init_ops_generic(hw); - - - /* EEPROM */ - eeprom->ops.init_params = &ixgbe_init_eeprom_params_X540; - eeprom->ops.read = &ixgbe_read_eerd_X540; - eeprom->ops.read_buffer = &ixgbe_read_eerd_buffer_X540; - eeprom->ops.write = &ixgbe_write_eewr_X540; - eeprom->ops.write_buffer = &ixgbe_write_eewr_buffer_X540; - eeprom->ops.update_checksum = &ixgbe_update_eeprom_checksum_X540; - eeprom->ops.validate_checksum = &ixgbe_validate_eeprom_checksum_X540; - eeprom->ops.calc_checksum = &ixgbe_calc_eeprom_checksum_X540; - - /* PHY */ - phy->ops.init = &ixgbe_init_phy_ops_generic; - phy->ops.reset = NULL; - - /* MAC */ - mac->ops.reset_hw = &ixgbe_reset_hw_X540; - mac->ops.get_media_type = &ixgbe_get_media_type_X540; - mac->ops.get_supported_physical_layer = - &ixgbe_get_supported_physical_layer_X540; - mac->ops.read_analog_reg8 = NULL; - mac->ops.write_analog_reg8 = NULL; - mac->ops.start_hw = &ixgbe_start_hw_X540; - mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic; - mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic; - mac->ops.get_device_caps = &ixgbe_get_device_caps_generic; - mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic; - mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic; - mac->ops.acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540; - mac->ops.release_swfw_sync = &ixgbe_release_swfw_sync_X540; - mac->ops.disable_sec_rx_path = &ixgbe_disable_sec_rx_path_generic; - mac->ops.enable_sec_rx_path = &ixgbe_enable_sec_rx_path_generic; - - /* RAR, Multicast, VLAN */ - mac->ops.set_vmdq = &ixgbe_set_vmdq_generic; - mac->ops.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic; - mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic; - mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic; - mac->rar_highwater = 1; - mac->ops.set_vfta = &ixgbe_set_vfta_generic; - mac->ops.set_vlvf = &ixgbe_set_vlvf_generic; - mac->ops.clear_vfta = &ixgbe_clear_vfta_generic; - mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic; - mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing; - mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing; - - /* Link */ - mac->ops.get_link_capabilities = - &ixgbe_get_copper_link_capabilities_generic; - mac->ops.setup_link = &ixgbe_setup_mac_link_X540; - mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic; - mac->ops.check_link = &ixgbe_check_mac_link_generic; - - mac->mcft_size = 128; - mac->vft_size = 128; - mac->num_rar_entries = 128; - mac->rx_pb_size = 384; - mac->max_tx_queues = 128; - mac->max_rx_queues = 128; - mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); - - /* - * FWSM register - * ARC supported; valid only if manageability features are - * enabled. - */ - mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) & - IXGBE_FWSM_MODE_MASK) ? true : false; - - //hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf; - - /* LEDs */ - mac->ops.blink_led_start = ixgbe_blink_led_start_X540; - mac->ops.blink_led_stop = ixgbe_blink_led_stop_X540; - - /* Manageability interface */ - mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic; - - return ret_val; -} - -/** - * ixgbe_get_link_capabilities_X540 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: true when autoneg or autotry is enabled - * - * Determines the link capabilities by reading the AUTOC register. - **/ -s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) -{ - ixgbe_get_copper_link_capabilities_generic(hw, speed, autoneg); - - return 0; -} - -/** - * ixgbe_get_media_type_X540 - Get media type - * @hw: pointer to hardware structure - * - * Returns the media type (fiber, copper, backplane) - **/ -enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) -{ - return ixgbe_media_type_copper; -} - -/** - * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - **/ -s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - return hw->phy.ops.setup_link_speed(hw, speed, autoneg, - autoneg_wait_to_complete); -} - -/** - * ixgbe_reset_hw_X540 - Perform hardware reset - * @hw: pointer to hardware structure - * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, and perform a reset. - **/ -s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) -{ - s32 status = 0; - - /* - * Userland DPDK takes the ownershiop of device - * Kernel driver here used as the simple path for ethtool only - * Won't real reset device anyway - */ -#if 0 - u32 ctrl, i; - - /* Call adapter stop to disable tx/rx and clear interrupts */ - status = hw->mac.ops.stop_adapter(hw); - if (status != 0) - goto reset_hw_out; - - /* flush pending Tx transactions */ - ixgbe_clear_tx_pending(hw); - -mac_reset_top: - ctrl = IXGBE_CTRL_RST; - ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); - IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); - IXGBE_WRITE_FLUSH(hw); - - /* Poll for reset bit to self-clear indicating reset is complete */ - for (i = 0; i < 10; i++) { - udelay(1); - ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); - if (!(ctrl & IXGBE_CTRL_RST_MASK)) - break; - } - - if (ctrl & IXGBE_CTRL_RST_MASK) { - status = IXGBE_ERR_RESET_FAILED; - hw_dbg(hw, "Reset polling failed to complete.\n"); - } - msleep(100); - - /* - * Double resets are required for recovery from certain error - * conditions. Between resets, it is necessary to stall to allow time - * for any pending HW events to complete. - */ - if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { - hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; - goto mac_reset_top; - } - - /* Set the Rx packet buffer size. */ - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT); - -#endif - - /* Store the permanent mac address */ - hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); - - /* - * Store MAC address from RAR0, clear receive address registers, and - * clear the multicast table. Also reset num_rar_entries to 128, - * since we modify this value when programming the SAN MAC address. - */ - hw->mac.num_rar_entries = 128; - hw->mac.ops.init_rx_addrs(hw); - - /* Store the permanent SAN mac address */ - hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); - - /* Add the SAN MAC address to the RAR only if it's a valid address */ - if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { - hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, - hw->mac.san_addr, 0, IXGBE_RAH_AV); - - /* Save the SAN MAC RAR index */ - hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; - - /* Reserve the last RAR for the SAN MAC address */ - hw->mac.num_rar_entries--; - } - - /* Store the alternative WWNN/WWPN prefix */ - hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, - &hw->mac.wwpn_prefix); - -//reset_hw_out: - return status; -} - -/** - * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure - * - * Starts the hardware using the generic start_hw function - * and the generation start_hw function. - * Then performs revision-specific operations, if any. - **/ -s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - - ret_val = ixgbe_start_hw_generic(hw); - if (ret_val != 0) - goto out; - - ret_val = ixgbe_start_hw_gen2(hw); - -out: - return ret_val; -} - -/** - * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) -{ - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u16 ext_ability = 0; - - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); - if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; - - return physical_layer; -} - -/** - * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params - * @hw: pointer to hardware structure - * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. - **/ -s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - u32 eec; - u16 eeprom_size; - - if (eeprom->type == ixgbe_eeprom_uninitialized) { - eeprom->semaphore_delay = 10; - eeprom->type = ixgbe_flash; - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> - IXGBE_EEC_SIZE_SHIFT); - eeprom->word_size = 1 << (eeprom_size + - IXGBE_EEPROM_WORD_SIZE_SHIFT); - - hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", - eeprom->type, eeprom->word_size); - } - - return 0; -} - -/** - * ixgbe_read_eerd_X540- Read EEPROM word using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM using the EERD register. - **/ -s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) -{ - s32 status = 0; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - 0) - status = ixgbe_read_eerd_generic(hw, offset, data); - else - status = IXGBE_ERR_SWFW_SYNC; - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - return status; -} - -/** - * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @words: number of words - * @data: word(s) read from the EEPROM - * - * Reads a 16 bit word(s) from the EEPROM using the EERD register. - **/ -s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, - u16 offset, u16 words, u16 *data) -{ - s32 status = 0; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - 0) - status = ixgbe_read_eerd_buffer_generic(hw, offset, - words, data); - else - status = IXGBE_ERR_SWFW_SYNC; - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - return status; -} - -/** - * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM - * - * Write a 16 bit word to the EEPROM using the EEWR register. - **/ -s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) -{ - s32 status = 0; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - 0) - status = ixgbe_write_eewr_generic(hw, offset, data); - else - status = IXGBE_ERR_SWFW_SYNC; - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - return status; -} - -/** - * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @words: number of words - * @data: word(s) write to the EEPROM - * - * Write a 16 bit word(s) to the EEPROM using the EEWR register. - **/ -s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, - u16 offset, u16 words, u16 *data) -{ - s32 status = 0; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - 0) - status = ixgbe_write_eewr_buffer_generic(hw, offset, - words, data); - else - status = IXGBE_ERR_SWFW_SYNC; - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - return status; -} - -/** - * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum - * - * This function does not use synchronization for EERD and EEWR. It can - * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540. - * - * @hw: pointer to hardware structure - **/ -u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) -{ - u16 i; - u16 j; - u16 checksum = 0; - u16 length = 0; - u16 pointer = 0; - u16 word = 0; - - /* - * Do not use hw->eeprom.ops.read because we do not want to take - * the synchronization semaphores here. Instead use - * ixgbe_read_eerd_generic - */ - - /* Include 0x0-0x3F in the checksum */ - for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { - if (ixgbe_read_eerd_generic(hw, i, &word) != 0) { - hw_dbg(hw, "EEPROM read failed\n"); - break; - } - checksum += word; - } - - /* - * Include all data from pointers 0x3, 0x6-0xE. This excludes the - * FW, PHY module, and PCIe Expansion/Option ROM pointers. - */ - for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { - if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) - continue; - - if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) { - hw_dbg(hw, "EEPROM read failed\n"); - break; - } - - /* Skip pointer section if the pointer is invalid. */ - if (pointer == 0xFFFF || pointer == 0 || - pointer >= hw->eeprom.word_size) - continue; - - if (ixgbe_read_eerd_generic(hw, pointer, &length) != - 0) { - hw_dbg(hw, "EEPROM read failed\n"); - break; - } - - /* Skip pointer section if length is invalid. */ - if (length == 0xFFFF || length == 0 || - (pointer + length) >= hw->eeprom.word_size) - continue; - - for (j = pointer+1; j <= pointer+length; j++) { - if (ixgbe_read_eerd_generic(hw, j, &word) != - 0) { - hw_dbg(hw, "EEPROM read failed\n"); - break; - } - checksum += word; - } - } - - checksum = (u16)IXGBE_EEPROM_SUM - checksum; - - return checksum; -} - -/** - * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum - * - * Performs checksum calculation and validates the EEPROM checksum. If the - * caller does not need checksum_val, the value can be NULL. - **/ -s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, - u16 *checksum_val) -{ - s32 status; - u16 checksum; - u16 read_checksum = 0; - - /* - * Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - status = hw->eeprom.ops.read(hw, 0, &checksum); - - if (status != 0) { - hw_dbg(hw, "EEPROM read failed\n"); - goto out; - } - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - 0) { - checksum = hw->eeprom.ops.calc_checksum(hw); - - /* - * Do not use hw->eeprom.ops.read because we do not want to take - * the synchronization semaphores twice here. - */ - ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM, - &read_checksum); - - /* - * Verify read checksum from EEPROM is the same as - * calculated checksum - */ - if (read_checksum != checksum) - status = IXGBE_ERR_EEPROM_CHECKSUM; - - /* If the user cares, return the calculated checksum */ - if (checksum_val) - *checksum_val = checksum; - } else { - status = IXGBE_ERR_SWFW_SYNC; - } - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); -out: - return status; -} - -/** - * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash - * @hw: pointer to hardware structure - * - * After writing EEPROM to shadow RAM using EEWR register, software calculates - * checksum and updates the EEPROM and instructs the hardware to update - * the flash. - **/ -s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw) -{ - s32 status; - u16 checksum; - - /* - * Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - status = hw->eeprom.ops.read(hw, 0, &checksum); - - if (status != 0) - hw_dbg(hw, "EEPROM read failed\n"); - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - 0) { - checksum = hw->eeprom.ops.calc_checksum(hw); - - /* - * Do not use hw->eeprom.ops.write because we do not want to - * take the synchronization semaphores twice here. - */ - status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, - checksum); - - if (status == 0) - status = ixgbe_update_flash_X540(hw); - else - status = IXGBE_ERR_SWFW_SYNC; - } - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - - return status; -} - -/** - * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device - * @hw: pointer to hardware structure - * - * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy - * EEPROM from shadow RAM to the flash device. - **/ -static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) -{ - u32 flup; - s32 status = IXGBE_ERR_EEPROM; - - status = ixgbe_poll_flash_update_done_X540(hw); - if (status == IXGBE_ERR_EEPROM) { - hw_dbg(hw, "Flash update time out\n"); - goto out; - } - - flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP; - IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); - - status = ixgbe_poll_flash_update_done_X540(hw); - if (status == 0) - hw_dbg(hw, "Flash update complete\n"); - else - hw_dbg(hw, "Flash update time out\n"); - - if (hw->revision_id == 0) { - flup = IXGBE_READ_REG(hw, IXGBE_EEC); - - if (flup & IXGBE_EEC_SEC1VAL) { - flup |= IXGBE_EEC_FLUP; - IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); - } - - status = ixgbe_poll_flash_update_done_X540(hw); - if (status == 0) - hw_dbg(hw, "Flash update complete\n"); - else - hw_dbg(hw, "Flash update time out\n"); - } -out: - return status; -} - -/** - * ixgbe_poll_flash_update_done_X540 - Poll flash update status - * @hw: pointer to hardware structure - * - * Polls the FLUDONE (bit 26) of the EEC Register to determine when the - * flash update is done. - **/ -static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) -{ - u32 i; - u32 reg; - s32 status = IXGBE_ERR_EEPROM; - - for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) { - reg = IXGBE_READ_REG(hw, IXGBE_EEC); - if (reg & IXGBE_EEC_FLUDONE) { - status = 0; - break; - } - udelay(5); - } - return status; -} - -/** - * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire - * - * Acquires the SWFW semaphore thought the SW_FW_SYNC register for - * the specified function (CSR, PHY0, PHY1, NVM, Flash) - **/ -s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) -{ - u32 swfw_sync; - u32 swmask = mask; - u32 fwmask = mask << 5; - u32 hwmask = 0; - u32 timeout = 200; - u32 i; - s32 ret_val = 0; - - if (swmask == IXGBE_GSSR_EEP_SM) - hwmask = IXGBE_GSSR_FLASH_SM; - - /* SW only mask doesn't have FW bit pair */ - if (swmask == IXGBE_GSSR_SW_MNG_SM) - fwmask = 0; - - for (i = 0; i < timeout; i++) { - /* - * SW NVM semaphore bit is used for access to all - * SW_FW_SYNC bits (not just NVM) - */ - if (ixgbe_get_swfw_sync_semaphore(hw)) { - ret_val = IXGBE_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); - if (!(swfw_sync & (fwmask | swmask | hwmask))) { - swfw_sync |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); - ixgbe_release_swfw_sync_semaphore(hw); - msleep(5); - goto out; - } else { - /* - * Firmware currently using resource (fwmask), hardware - * currently using resource (hwmask), or other software - * thread currently using resource (swmask) - */ - ixgbe_release_swfw_sync_semaphore(hw); - msleep(5); - } - } - - /* Failed to get SW only semaphore */ - if (swmask == IXGBE_GSSR_SW_MNG_SM) { - ret_val = IXGBE_ERR_SWFW_SYNC; - goto out; - } - - /* If the resource is not released by the FW/HW the SW can assume that - * the FW/HW malfunctions. In that case the SW should sets the SW bit(s) - * of the requested resource(s) while ignoring the corresponding FW/HW - * bits in the SW_FW_SYNC register. - */ - swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); - if (swfw_sync & (fwmask | hwmask)) { - if (ixgbe_get_swfw_sync_semaphore(hw)) { - ret_val = IXGBE_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); - ixgbe_release_swfw_sync_semaphore(hw); - msleep(5); - } - -out: - return ret_val; -} - -/** - * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release - * - * Releases the SWFW semaphore through the SW_FW_SYNC register - * for the specified function (CSR, PHY0, PHY1, EVM, Flash) - **/ -void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) -{ - u32 swfw_sync; - u32 swmask = mask; - - ixgbe_get_swfw_sync_semaphore(hw); - - swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); - swfw_sync &= ~swmask; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); - - ixgbe_release_swfw_sync_semaphore(hw); - msleep(5); -} - -/** - * ixgbe_get_nvm_semaphore - Get hardware semaphore - * @hw: pointer to hardware structure - * - * Sets the hardware semaphores so SW/FW can gain control of shared resources - **/ -static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_EEPROM; - u32 timeout = 2000; - u32 i; - u32 swsm; - - /* Get SMBI software semaphore between device drivers first */ - for (i = 0; i < timeout; i++) { - /* - * If the SMBI bit is 0 when we read it, then the bit will be - * set and we have the semaphore - */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - if (!(swsm & IXGBE_SWSM_SMBI)) { - status = 0; - break; - } - udelay(50); - } - - /* Now get the semaphore between SW/FW through the REGSMP bit */ - if (status == 0) { - for (i = 0; i < timeout; i++) { - swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); - if (!(swsm & IXGBE_SWFW_REGSMP)) - break; - - udelay(50); - } - - /* - * Release semaphores and return error if SW NVM semaphore - * was not granted because we don't have access to the EEPROM - */ - if (i >= timeout) { - hw_dbg(hw, "REGSMP Software NVM semaphore not " - "granted.\n"); - ixgbe_release_swfw_sync_semaphore(hw); - status = IXGBE_ERR_EEPROM; - } - } else { - hw_dbg(hw, "Software semaphore SMBI between device drivers " - "not granted.\n"); - } - - return status; -} - -/** - * ixgbe_release_nvm_semaphore - Release hardware semaphore - * @hw: pointer to hardware structure - * - * This function clears hardware semaphore bits. - **/ -static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) -{ - u32 swsm; - - /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */ - - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - swsm &= ~IXGBE_SWSM_SMBI; - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); - - swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); - swsm &= ~IXGBE_SWFW_REGSMP; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm); - - IXGBE_WRITE_FLUSH(hw); -} - -/** - * ixgbe_blink_led_start_X540 - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink - * - * Devices that implement the version 2 interface: - * X540 - **/ -s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) -{ - u32 macc_reg; - u32 ledctl_reg; - ixgbe_link_speed speed; - bool link_up; - - /* - * Link should be up in order for the blink bit in the LED control - * register to work. Force link and speed in the MAC if link is down. - * This will be reversed when we stop the blinking. - */ - hw->mac.ops.check_link(hw, &speed, &link_up, false); - if (link_up == false) { - macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); - macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS; - IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); - } - /* Set the LED to LINK_UP + BLINK. */ - ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); - ledctl_reg |= IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking - * - * Devices that implement the version 2 interface: - * X540 - **/ -s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) -{ - u32 macc_reg; - u32 ledctl_reg; - - /* Restore the LED to its default value. */ - ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); - ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); - ledctl_reg &= ~IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); - - /* Unforce link and speed in the MAC. */ - macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); - macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS); - IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h deleted file mode 100644 index 96020911d8..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _IXGBE_X540_H_ -#define _IXGBE_X540_H_ - -#include "ixgbe_type.h" - -s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, bool *autoneg); -enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw); -s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool link_up_wait_to_complete); -s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw); -s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw); -u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw); - -s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw); -s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data); -s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words, - u16 *data); -s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data); -s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words, - u16 *data); -s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw); -s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, u16 *checksum_val); -u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw); - -s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); -void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); - -s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index); -#endif /* _IXGBE_X540_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/kcompat.c b/kernel/linux/kni/ethtool/ixgbe/kcompat.c deleted file mode 100644 index 6c99457640..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/kcompat.c +++ /dev/null @@ -1,1231 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe.h" -#include "kcompat.h" - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) ) -/* From lib/vsprintf.c */ -#include - -static int skip_atoi(const char **s) -{ - int i=0; - - while (isdigit(**s)) - i = i*10 + *((*s)++) - '0'; - return i; -} - -#define _kc_ZEROPAD 1 /* pad with zero */ -#define _kc_SIGN 2 /* unsigned/signed long */ -#define _kc_PLUS 4 /* show plus */ -#define _kc_SPACE 8 /* space if plus */ -#define _kc_LEFT 16 /* left justified */ -#define _kc_SPECIAL 32 /* 0x */ -#define _kc_LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ - -static char * number(char * buf, char * end, long long num, int base, int size, int precision, int type) -{ - char c,sign,tmp[66]; - const char *digits; - const char small_digits[] = "0123456789abcdefghijklmnopqrstuvwxyz"; - const char large_digits[] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; - int i; - - digits = (type & _kc_LARGE) ? large_digits : small_digits; - if (type & _kc_LEFT) - type &= ~_kc_ZEROPAD; - if (base < 2 || base > 36) - return 0; - c = (type & _kc_ZEROPAD) ? '0' : ' '; - sign = 0; - if (type & _kc_SIGN) { - if (num < 0) { - sign = '-'; - num = -num; - size--; - } else if (type & _kc_PLUS) { - sign = '+'; - size--; - } else if (type & _kc_SPACE) { - sign = ' '; - size--; - } - } - if (type & _kc_SPECIAL) { - if (base == 16) - size -= 2; - else if (base == 8) - size--; - } - i = 0; - if (num == 0) - tmp[i++]='0'; - else while (num != 0) - tmp[i++] = digits[do_div(num,base)]; - if (i > precision) - precision = i; - size -= precision; - if (!(type&(_kc_ZEROPAD+_kc_LEFT))) { - while(size-->0) { - if (buf <= end) - *buf = ' '; - ++buf; - } - } - if (sign) { - if (buf <= end) - *buf = sign; - ++buf; - } - if (type & _kc_SPECIAL) { - if (base==8) { - if (buf <= end) - *buf = '0'; - ++buf; - } else if (base==16) { - if (buf <= end) - *buf = '0'; - ++buf; - if (buf <= end) - *buf = digits[33]; - ++buf; - } - } - if (!(type & _kc_LEFT)) { - while (size-- > 0) { - if (buf <= end) - *buf = c; - ++buf; - } - } - while (i < precision--) { - if (buf <= end) - *buf = '0'; - ++buf; - } - while (i-- > 0) { - if (buf <= end) - *buf = tmp[i]; - ++buf; - } - while (size-- > 0) { - if (buf <= end) - *buf = ' '; - ++buf; - } - return buf; -} - -int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args) -{ - int len; - unsigned long long num; - int i, base; - char *str, *end, c; - const char *s; - - int flags; /* flags to number() */ - - int field_width; /* width of output field */ - int precision; /* min. # of digits for integers; max - number of chars for from string */ - int qualifier; /* 'h', 'l', or 'L' for integer fields */ - /* 'z' support added 23/7/1999 S.H. */ - /* 'z' changed to 'Z' --davidm 1/25/99 */ - - str = buf; - end = buf + size - 1; - - if (end < buf - 1) { - end = ((void *) -1); - size = end - buf + 1; - } - - for (; *fmt ; ++fmt) { - if (*fmt != '%') { - if (str <= end) - *str = *fmt; - ++str; - continue; - } - - /* process flags */ - flags = 0; - repeat: - ++fmt; /* this also skips first '%' */ - switch (*fmt) { - case '-': flags |= _kc_LEFT; goto repeat; - case '+': flags |= _kc_PLUS; goto repeat; - case ' ': flags |= _kc_SPACE; goto repeat; - case '#': flags |= _kc_SPECIAL; goto repeat; - case '0': flags |= _kc_ZEROPAD; goto repeat; - } - - /* get field width */ - field_width = -1; - if (isdigit(*fmt)) - field_width = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - field_width = va_arg(args, int); - if (field_width < 0) { - field_width = -field_width; - flags |= _kc_LEFT; - } - } - - /* get the precision */ - precision = -1; - if (*fmt == '.') { - ++fmt; - if (isdigit(*fmt)) - precision = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - precision = va_arg(args, int); - } - if (precision < 0) - precision = 0; - } - - /* get the conversion qualifier */ - qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || *fmt =='Z') { - qualifier = *fmt; - ++fmt; - } - - /* default base */ - base = 10; - - switch (*fmt) { - case 'c': - if (!(flags & _kc_LEFT)) { - while (--field_width > 0) { - if (str <= end) - *str = ' '; - ++str; - } - } - c = (unsigned char) va_arg(args, int); - if (str <= end) - *str = c; - ++str; - while (--field_width > 0) { - if (str <= end) - *str = ' '; - ++str; - } - continue; - - case 's': - s = va_arg(args, char *); - if (!s) - s = ""; - - len = strnlen(s, precision); - - if (!(flags & _kc_LEFT)) { - while (len < field_width--) { - if (str <= end) - *str = ' '; - ++str; - } - } - for (i = 0; i < len; ++i) { - if (str <= end) - *str = *s; - ++str; ++s; - } - while (len < field_width--) { - if (str <= end) - *str = ' '; - ++str; - } - continue; - - case 'p': - if (field_width == -1) { - field_width = 2*sizeof(void *); - flags |= _kc_ZEROPAD; - } - str = number(str, end, - (unsigned long) va_arg(args, void *), - 16, field_width, precision, flags); - continue; - - - case 'n': - /* FIXME: - * What does C99 say about the overflow case here? */ - if (qualifier == 'l') { - long * ip = va_arg(args, long *); - *ip = (str - buf); - } else if (qualifier == 'Z') { - size_t * ip = va_arg(args, size_t *); - *ip = (str - buf); - } else { - int * ip = va_arg(args, int *); - *ip = (str - buf); - } - continue; - - case '%': - if (str <= end) - *str = '%'; - ++str; - continue; - - /* integer number formats - set up the flags and "break" */ - case 'o': - base = 8; - break; - - case 'X': - flags |= _kc_LARGE; - case 'x': - base = 16; - break; - - case 'd': - case 'i': - flags |= _kc_SIGN; - case 'u': - break; - - default: - if (str <= end) - *str = '%'; - ++str; - if (*fmt) { - if (str <= end) - *str = *fmt; - ++str; - } else { - --fmt; - } - continue; - } - if (qualifier == 'L') - num = va_arg(args, long long); - else if (qualifier == 'l') { - num = va_arg(args, unsigned long); - if (flags & _kc_SIGN) - num = (signed long) num; - } else if (qualifier == 'Z') { - num = va_arg(args, size_t); - } else if (qualifier == 'h') { - num = (unsigned short) va_arg(args, int); - if (flags & _kc_SIGN) - num = (signed short) num; - } else { - num = va_arg(args, unsigned int); - if (flags & _kc_SIGN) - num = (signed int) num; - } - str = number(str, end, num, base, - field_width, precision, flags); - } - if (str <= end) - *str = '\0'; - else if (size > 0) - /* don't write out a null byte if the buf size is zero */ - *end = '\0'; - /* the trailing null byte doesn't count towards the total - * ++str; - */ - return str-buf; -} - -int _kc_snprintf(char * buf, size_t size, const char *fmt, ...) -{ - va_list args; - int i; - - va_start(args, fmt); - i = _kc_vsnprintf(buf,size,fmt,args); - va_end(args); - return i; -} -#endif /* < 2.4.8 */ - - - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) -#ifdef CONFIG_PCI_IOV -int __kc_pci_vfs_assigned(struct pci_dev *dev) -{ - unsigned int vfs_assigned = 0; -#ifdef HAVE_PCI_DEV_FLAGS_ASSIGNED - int pos; - struct pci_dev *vfdev; - unsigned short dev_id; - - /* only search if we are a PF */ - if (!dev->is_physfn) - return 0; - - /* find SR-IOV capability */ - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); - if (!pos) - return 0; - - /* - * * determine the device ID for the VFs, the vendor ID will be the - * * same as the PF so there is no need to check for that one - * */ - pci_read_config_word(dev, pos + PCI_SRIOV_VF_DID, &dev_id); - - /* loop through all the VFs to see if we own any that are assigned */ - vfdev = pci_get_device(dev->vendor, dev_id, NULL); - while (vfdev) { - /* - * * It is considered assigned if it is a virtual function with - * * our dev as the physical function and the assigned bit is set - * */ - if (vfdev->is_virtfn && (vfdev->physfn == dev) && - (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED)) - vfs_assigned++; - - vfdev = pci_get_device(dev->vendor, dev_id, vfdev); - } - -#endif /* HAVE_PCI_DEV_FLAGS_ASSIGNED */ - return vfs_assigned; -} - -#endif /* CONFIG_PCI_IOV */ -#endif /* 3.10.0 */ - - - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) ) - -/**************************************/ -/* PCI DMA MAPPING */ - -#if defined(CONFIG_HIGHMEM) - -#ifndef PCI_DRAM_OFFSET -#define PCI_DRAM_OFFSET 0 -#endif - -u64 -_kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, - size_t size, int direction) -{ - return ((u64) (page - mem_map) << PAGE_SHIFT) + offset + - PCI_DRAM_OFFSET; -} - -#else /* CONFIG_HIGHMEM */ - -u64 -_kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, - size_t size, int direction) -{ - return pci_map_single(dev, (void *)page_address(page) + offset, size, - direction); -} - -#endif /* CONFIG_HIGHMEM */ - -void -_kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size, - int direction) -{ - return pci_unmap_single(dev, dma_addr, size, direction); -} - -#endif /* 2.4.13 => 2.4.3 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) ) - -/**************************************/ -/* PCI DRIVER API */ - -int -_kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask) -{ - if (!pci_dma_supported(dev, mask)) - return -EIO; - dev->dma_mask = mask; - return 0; -} - -int -_kc_pci_request_regions(struct pci_dev *dev, char *res_name) -{ - int i; - - for (i = 0; i < 6; i++) { - if (pci_resource_len(dev, i) == 0) - continue; - - if (pci_resource_flags(dev, i) & IORESOURCE_IO) { - if (!request_region(pci_resource_start(dev, i), pci_resource_len(dev, i), res_name)) { - pci_release_regions(dev); - return -EBUSY; - } - } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) { - if (!request_mem_region(pci_resource_start(dev, i), pci_resource_len(dev, i), res_name)) { - pci_release_regions(dev); - return -EBUSY; - } - } - } - return 0; -} - -void -_kc_pci_release_regions(struct pci_dev *dev) -{ - int i; - - for (i = 0; i < 6; i++) { - if (pci_resource_len(dev, i) == 0) - continue; - - if (pci_resource_flags(dev, i) & IORESOURCE_IO) - release_region(pci_resource_start(dev, i), pci_resource_len(dev, i)); - - else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) - release_mem_region(pci_resource_start(dev, i), pci_resource_len(dev, i)); - } -} - -/**************************************/ -/* NETWORK DRIVER API */ - -struct net_device * -_kc_alloc_etherdev(int sizeof_priv) -{ - struct net_device *dev; - int alloc_size; - - alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 31; - dev = kzalloc(alloc_size, GFP_KERNEL); - if (!dev) - return NULL; - - if (sizeof_priv) - dev->priv = (void *) (((unsigned long)(dev + 1) + 31) & ~31); - dev->name[0] = '\0'; - ether_setup(dev); - - return dev; -} - -int -_kc_is_valid_ether_addr(u8 *addr) -{ - const char zaddr[6] = { 0, }; - - return !(addr[0] & 1) && memcmp(addr, zaddr, 6); -} - -#endif /* 2.4.3 => 2.4.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) ) - -int -_kc_pci_set_power_state(struct pci_dev *dev, int state) -{ - return 0; -} - -int -_kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable) -{ - return 0; -} - -#endif /* 2.4.6 => 2.4.3 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) -void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page, - int off, int size) -{ - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - frag->page = page; - frag->page_offset = off; - frag->size = size; - skb_shinfo(skb)->nr_frags = i + 1; -} - -/* - * Original Copyright: - * find_next_bit.c: fallback find next bit implementation - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - */ - -/** - * find_next_bit - find the next set bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -unsigned long find_next_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) -{ - const unsigned long *p = addr + BITOP_WORD(offset); - unsigned long result = offset & ~(BITS_PER_LONG-1); - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset %= BITS_PER_LONG; - if (offset) { - tmp = *(p++); - tmp &= (~0UL << offset); - if (size < BITS_PER_LONG) - goto found_first; - if (tmp) - goto found_middle; - size -= BITS_PER_LONG; - result += BITS_PER_LONG; - } - while (size & ~(BITS_PER_LONG-1)) { - if ((tmp = *(p++))) - goto found_middle; - result += BITS_PER_LONG; - size -= BITS_PER_LONG; - } - if (!size) - return result; - tmp = *p; - -found_first: - tmp &= (~0UL >> (BITS_PER_LONG - size)); - if (tmp == 0UL) /* Are any bits set? */ - return result + size; /* Nope. */ -found_middle: - return result + ffs(tmp); -} - -size_t _kc_strlcpy(char *dest, const char *src, size_t size) -{ - size_t ret = strlen(src); - - if (size) { - size_t len = (ret >= size) ? size - 1 : ret; - memcpy(dest, src, len); - dest[len] = '\0'; - } - return ret; -} - -#endif /* 2.6.0 => 2.4.6 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) -int _kc_scnprintf(char * buf, size_t size, const char *fmt, ...) -{ - va_list args; - int i; - - va_start(args, fmt); - i = vsnprintf(buf, size, fmt, args); - va_end(args); - return (i >= size) ? (size - 1) : i; -} -#endif /* < 2.6.4 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) -DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES) = {1}; -#endif /* < 2.6.10 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) ) -char *_kc_kstrdup(const char *s, unsigned int gfp) -{ - size_t len; - char *buf; - - if (!s) - return NULL; - - len = strlen(s) + 1; - buf = kmalloc(len, gfp); - if (buf) - memcpy(buf, s, len); - return buf; -} -#endif /* < 2.6.13 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ) -void *_kc_kzalloc(size_t size, int flags) -{ - void *ret = kmalloc(size, flags); - if (ret) - memset(ret, 0, size); - return ret; -} -#endif /* <= 2.6.13 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ) -int _kc_skb_pad(struct sk_buff *skb, int pad) -{ - int ntail; - - /* If the skbuff is non linear tailroom is always zero.. */ - if(!skb_cloned(skb) && skb_tailroom(skb) >= pad) { - memset(skb->data+skb->len, 0, pad); - return 0; - } - - ntail = skb->data_len + pad - (skb->end - skb->tail); - if (likely(skb_cloned(skb) || ntail > 0)) { - if (pskb_expand_head(skb, 0, ntail, GFP_ATOMIC)); - goto free_skb; - } - -#ifdef MAX_SKB_FRAGS - if (skb_is_nonlinear(skb) && - !__pskb_pull_tail(skb, skb->data_len)) - goto free_skb; - -#endif - memset(skb->data + skb->len, 0, pad); - return 0; - -free_skb: - kfree_skb(skb); - return -ENOMEM; -} - -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4))) -int _kc_pci_save_state(struct pci_dev *pdev) -{ - struct adapter_struct *adapter = pci_get_drvdata(pdev); - int size = PCI_CONFIG_SPACE_LEN, i; - u16 pcie_cap_offset, pcie_link_status; - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) - /* no ->dev for 2.4 kernels */ - WARN_ON(pdev->dev.driver_data == NULL); -#endif - pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP); - if (pcie_cap_offset) { - if (!pci_read_config_word(pdev, - pcie_cap_offset + PCIE_LINK_STATUS, - &pcie_link_status)) - size = PCIE_CONFIG_SPACE_LEN; - } - pci_config_space_ich8lan(); -#ifdef HAVE_PCI_ERS - if (adapter->config_space == NULL) -#else - WARN_ON(adapter->config_space != NULL); -#endif - adapter->config_space = kmalloc(size, GFP_KERNEL); - if (!adapter->config_space) { - printk(KERN_ERR "Out of memory in pci_save_state\n"); - return -ENOMEM; - } - for (i = 0; i < (size / 4); i++) - pci_read_config_dword(pdev, i * 4, &adapter->config_space[i]); - return 0; -} - -void _kc_pci_restore_state(struct pci_dev *pdev) -{ - struct adapter_struct *adapter = pci_get_drvdata(pdev); - int size = PCI_CONFIG_SPACE_LEN, i; - u16 pcie_cap_offset; - u16 pcie_link_status; - - if (adapter->config_space != NULL) { - pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP); - if (pcie_cap_offset && - !pci_read_config_word(pdev, - pcie_cap_offset + PCIE_LINK_STATUS, - &pcie_link_status)) - size = PCIE_CONFIG_SPACE_LEN; - - pci_config_space_ich8lan(); - for (i = 0; i < (size / 4); i++) - pci_write_config_dword(pdev, i * 4, adapter->config_space[i]); -#ifndef HAVE_PCI_ERS - kfree(adapter->config_space); - adapter->config_space = NULL; -#endif - } -} -#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */ - -#ifdef HAVE_PCI_ERS -void _kc_free_netdev(struct net_device *netdev) -{ - struct adapter_struct *adapter = netdev_priv(netdev); - - if (adapter->config_space != NULL) - kfree(adapter->config_space); -#ifdef CONFIG_SYSFS - if (netdev->reg_state == NETREG_UNINITIALIZED) { - kfree((char *)netdev - netdev->padded); - } else { - BUG_ON(netdev->reg_state != NETREG_UNREGISTERED); - netdev->reg_state = NETREG_RELEASED; - class_device_put(&netdev->class_dev); - } -#else - kfree((char *)netdev - netdev->padded); -#endif -} -#endif - -void *_kc_kmemdup(const void *src, size_t len, unsigned gfp) -{ - void *p; - - p = kzalloc(len, gfp); - if (p) - memcpy(p, src, len); - return p; -} -#endif /* <= 2.6.19 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) -/* hexdump code taken from lib/hexdump.c */ -static void _kc_hex_dump_to_buffer(const void *buf, size_t len, int rowsize, - int groupsize, unsigned char *linebuf, - size_t linebuflen, bool ascii) -{ - const u8 *ptr = buf; - u8 ch; - int j, lx = 0; - int ascii_column; - - if (rowsize != 16 && rowsize != 32) - rowsize = 16; - - if (!len) - goto nil; - if (len > rowsize) /* limit to one line at a time */ - len = rowsize; - if ((len % groupsize) != 0) /* no mixed size output */ - groupsize = 1; - - switch (groupsize) { - case 8: { - const u64 *ptr8 = buf; - int ngroups = len / groupsize; - - for (j = 0; j < ngroups; j++) - lx += scnprintf((char *)(linebuf + lx), linebuflen - lx, - "%s%16.16llx", j ? " " : "", - (unsigned long long)*(ptr8 + j)); - ascii_column = 17 * ngroups + 2; - break; - } - - case 4: { - const u32 *ptr4 = buf; - int ngroups = len / groupsize; - - for (j = 0; j < ngroups; j++) - lx += scnprintf((char *)(linebuf + lx), linebuflen - lx, - "%s%8.8x", j ? " " : "", *(ptr4 + j)); - ascii_column = 9 * ngroups + 2; - break; - } - - case 2: { - const u16 *ptr2 = buf; - int ngroups = len / groupsize; - - for (j = 0; j < ngroups; j++) - lx += scnprintf((char *)(linebuf + lx), linebuflen - lx, - "%s%4.4x", j ? " " : "", *(ptr2 + j)); - ascii_column = 5 * ngroups + 2; - break; - } - - default: - for (j = 0; (j < len) && (lx + 3) <= linebuflen; j++) { - ch = ptr[j]; - linebuf[lx++] = hex_asc(ch >> 4); - linebuf[lx++] = hex_asc(ch & 0x0f); - linebuf[lx++] = ' '; - } - if (j) - lx--; - - ascii_column = 3 * rowsize + 2; - break; - } - if (!ascii) - goto nil; - - while (lx < (linebuflen - 1) && lx < (ascii_column - 1)) - linebuf[lx++] = ' '; - for (j = 0; (j < len) && (lx + 2) < linebuflen; j++) - linebuf[lx++] = (isascii(ptr[j]) && isprint(ptr[j])) ? ptr[j] - : '.'; -nil: - linebuf[lx++] = '\0'; -} - -void _kc_print_hex_dump(const char *level, - const char *prefix_str, int prefix_type, - int rowsize, int groupsize, - const void *buf, size_t len, bool ascii) -{ - const u8 *ptr = buf; - int i, linelen, remaining = len; - unsigned char linebuf[200]; - - if (rowsize != 16 && rowsize != 32) - rowsize = 16; - - for (i = 0; i < len; i += rowsize) { - linelen = min(remaining, rowsize); - remaining -= rowsize; - _kc_hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, - linebuf, sizeof(linebuf), ascii); - - switch (prefix_type) { - case DUMP_PREFIX_ADDRESS: - printk("%s%s%*p: %s\n", level, prefix_str, - (int)(2 * sizeof(void *)), ptr + i, linebuf); - break; - case DUMP_PREFIX_OFFSET: - printk("%s%s%.8x: %s\n", level, prefix_str, i, linebuf); - break; - default: - printk("%s%s%s\n", level, prefix_str, linebuf); - break; - } - } -} -#endif /* < 2.6.22 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ) -int ixgbe_dcb_netlink_register(void) -{ - return 0; -} - -int ixgbe_dcb_netlink_unregister(void) -{ - return 0; -} - -int ixgbe_copy_dcb_cfg(struct ixgbe_adapter *adapter, int tc_max) -{ - return 0; -} -#endif /* < 2.6.23 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) -#ifdef NAPI -struct net_device *napi_to_poll_dev(struct napi_struct *napi) -{ - struct adapter_q_vector *q_vector = container_of(napi, - struct adapter_q_vector, - napi); - return &q_vector->poll_dev; -} - -int __kc_adapter_clean(struct net_device *netdev, int *budget) -{ - int work_done; - int work_to_do = min(*budget, netdev->quota); - /* kcompat.h netif_napi_add puts napi struct in "fake netdev->priv" */ - struct napi_struct *napi = netdev->priv; - work_done = napi->poll(napi, work_to_do); - *budget -= work_done; - netdev->quota -= work_done; - return (work_done >= work_to_do) ? 1 : 0; -} -#endif /* NAPI */ -#endif /* <= 2.6.24 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ) -void _kc_pci_disable_link_state(struct pci_dev *pdev, int state) -{ - struct pci_dev *parent = pdev->bus->self; - u16 link_state; - int pos; - - if (!parent) - return; - - pos = pci_find_capability(parent, PCI_CAP_ID_EXP); - if (pos) { - pci_read_config_word(parent, pos + PCI_EXP_LNKCTL, &link_state); - link_state &= ~state; - pci_write_config_word(parent, pos + PCI_EXP_LNKCTL, link_state); - } -} -#endif /* < 2.6.26 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) ) -#ifdef HAVE_TX_MQ -void _kc_netif_tx_stop_all_queues(struct net_device *netdev) -{ - struct adapter_struct *adapter = netdev_priv(netdev); - int i; - - netif_stop_queue(netdev); - if (netif_is_multiqueue(netdev)) - for (i = 0; i < adapter->num_tx_queues; i++) - netif_stop_subqueue(netdev, i); -} -void _kc_netif_tx_wake_all_queues(struct net_device *netdev) -{ - struct adapter_struct *adapter = netdev_priv(netdev); - int i; - - netif_wake_queue(netdev); - if (netif_is_multiqueue(netdev)) - for (i = 0; i < adapter->num_tx_queues; i++) - netif_wake_subqueue(netdev, i); -} -void _kc_netif_tx_start_all_queues(struct net_device *netdev) -{ - struct adapter_struct *adapter = netdev_priv(netdev); - int i; - - netif_start_queue(netdev); - if (netif_is_multiqueue(netdev)) - for (i = 0; i < adapter->num_tx_queues; i++) - netif_start_subqueue(netdev, i); -} -#endif /* HAVE_TX_MQ */ - -#ifndef __WARN_printf -void __kc_warn_slowpath(const char *file, int line, const char *fmt, ...) -{ - va_list args; - - printk(KERN_WARNING "------------[ cut here ]------------\n"); - printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file, line); - va_start(args, fmt); - vprintk(fmt, args); - va_end(args); - - dump_stack(); -} -#endif /* __WARN_printf */ -#endif /* < 2.6.27 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) - -int -_kc_pci_prepare_to_sleep(struct pci_dev *dev) -{ - pci_power_t target_state; - int error; - - target_state = pci_choose_state(dev, PMSG_SUSPEND); - - pci_enable_wake(dev, target_state, true); - - error = pci_set_power_state(dev, target_state); - - if (error) - pci_enable_wake(dev, target_state, false); - - return error; -} - -int -_kc_pci_wake_from_d3(struct pci_dev *dev, bool enable) -{ - int err; - - err = pci_enable_wake(dev, PCI_D3cold, enable); - if (err) - goto out; - - err = pci_enable_wake(dev, PCI_D3hot, enable); - -out: - return err; -} -#endif /* < 2.6.28 */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) ) -void _kc_skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, - int off, int size) -{ - skb_fill_page_desc(skb, i, page, off, size); - skb->len += size; - skb->data_len += size; - skb->truesize += size; -} -#endif /* < 3.4.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ) -#ifdef HAVE_NETDEV_SELECT_QUEUE -#include -static u32 _kc_simple_tx_hashrnd; -static u32 _kc_simple_tx_hashrnd_initialized; - -u16 _kc_skb_tx_hash(struct net_device *dev, struct sk_buff *skb) -{ - u32 addr1, addr2, ports; - u32 hash, ihl; - u8 ip_proto = 0; - - if (unlikely(!_kc_simple_tx_hashrnd_initialized)) { - get_random_bytes(&_kc_simple_tx_hashrnd, 4); - _kc_simple_tx_hashrnd_initialized = 1; - } - - switch (skb->protocol) { - case htons(ETH_P_IP): - if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET))) - ip_proto = ip_hdr(skb)->protocol; - addr1 = ip_hdr(skb)->saddr; - addr2 = ip_hdr(skb)->daddr; - ihl = ip_hdr(skb)->ihl; - break; -#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) - case htons(ETH_P_IPV6): - ip_proto = ipv6_hdr(skb)->nexthdr; - addr1 = ipv6_hdr(skb)->saddr.s6_addr32[3]; - addr2 = ipv6_hdr(skb)->daddr.s6_addr32[3]; - ihl = (40 >> 2); - break; -#endif - default: - return 0; - } - - - switch (ip_proto) { - case IPPROTO_TCP: - case IPPROTO_UDP: - case IPPROTO_DCCP: - case IPPROTO_ESP: - case IPPROTO_AH: - case IPPROTO_SCTP: - case IPPROTO_UDPLITE: - ports = *((u32 *) (skb_network_header(skb) + (ihl * 4))); - break; - - default: - ports = 0; - break; - } - - hash = jhash_3words(addr1, addr2, ports, _kc_simple_tx_hashrnd); - - return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32); -} -#endif /* HAVE_NETDEV_SELECT_QUEUE */ -#endif /* < 2.6.30 */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ) -#ifdef HAVE_TX_MQ -#ifndef CONFIG_NETDEVICES_MULTIQUEUE -void _kc_netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq) -{ - unsigned int real_num = dev->real_num_tx_queues; - struct Qdisc *qdisc; - int i; - - if (unlikely(txq > dev->num_tx_queues)) - ; - else if (txq > real_num) - dev->real_num_tx_queues = txq; - else if ( txq < real_num) { - dev->real_num_tx_queues = txq; - for (i = txq; i < dev->num_tx_queues; i++) { - qdisc = netdev_get_tx_queue(dev, i)->qdisc; - if (qdisc) { - spin_lock_bh(qdisc_lock(qdisc)); - qdisc_reset(qdisc); - spin_unlock_bh(qdisc_lock(qdisc)); - } - } - } -} -#endif /* CONFIG_NETDEVICES_MULTIQUEUE */ -#endif /* HAVE_TX_MQ */ -#endif /* < 2.6.35 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ) -static const u32 _kc_flags_dup_features = - (ETH_FLAG_LRO | ETH_FLAG_NTUPLE | ETH_FLAG_RXHASH); - -u32 _kc_ethtool_op_get_flags(struct net_device *dev) -{ - return dev->features & _kc_flags_dup_features; -} - -int _kc_ethtool_op_set_flags(struct net_device *dev, u32 data, u32 supported) -{ - if (data & ~supported) - return -EINVAL; - - dev->features = ((dev->features & ~_kc_flags_dup_features) | - (data & _kc_flags_dup_features)); - return 0; -} -#endif /* < 2.6.36 */ - -/******************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) ) -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0))) -u8 _kc_netdev_get_num_tc(struct net_device *dev) -{ - struct adapter_struct *kc_adapter = netdev_priv(dev); - if (kc_adapter->flags & IXGBE_FLAG_DCB_ENABLED) - return kc_adapter->tc; - else - return 0; -} - -u8 _kc_netdev_get_prio_tc_map(struct net_device *dev, u8 up) -{ - struct adapter_struct *kc_adapter = netdev_priv(dev); - int tc; - u8 map; - - for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) { - map = kc_adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap; - - if (map & (1 << up)) - return tc; - } - - return 0; -} -#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0)) */ -#endif /* < 2.6.39 */ diff --git a/kernel/linux/kni/ethtool/ixgbe/kcompat.h b/kernel/linux/kni/ethtool/ixgbe/kcompat.h deleted file mode 100644 index 419fd1f13e..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/kcompat.h +++ /dev/null @@ -1,3144 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#ifndef _KCOMPAT_H_ -#define _KCOMPAT_H_ - -#ifndef LINUX_VERSION_CODE -#include -#else -#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* NAPI enable/disable flags here */ -/* enable NAPI for ixgbe by default */ -#undef CONFIG_IXGBE_NAPI -#define CONFIG_IXGBE_NAPI -#define NAPI -#ifdef CONFIG_IXGBE_NAPI -#undef NAPI -#define NAPI -#endif /* CONFIG_IXGBE_NAPI */ -#ifdef IXGBE_NAPI -#undef NAPI -#define NAPI -#endif /* IXGBE_NAPI */ -#ifdef IXGBE_NO_NAPI -#undef NAPI -#endif /* IXGBE_NO_NAPI */ - -#define adapter_struct ixgbe_adapter -#define adapter_q_vector ixgbe_q_vector - -/* and finally set defines so that the code sees the changes */ -#ifdef NAPI -#ifndef CONFIG_IXGBE_NAPI -#define CONFIG_IXGBE_NAPI -#endif -#else -#undef CONFIG_IXGBE_NAPI -#endif /* NAPI */ - -/* packet split disable/enable */ -#ifdef DISABLE_PACKET_SPLIT -#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT -#define CONFIG_IXGBE_DISABLE_PACKET_SPLIT -#endif -#endif /* DISABLE_PACKET_SPLIT */ - -/* MSI compatibility code for all kernels and drivers */ -#ifdef DISABLE_PCI_MSI -#undef CONFIG_PCI_MSI -#endif -#ifndef CONFIG_PCI_MSI -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) -struct msix_entry { - u16 vector; /* kernel uses to write allocated vector */ - u16 entry; /* driver uses to specify entry, OS writes */ -}; -#endif -#undef pci_enable_msi -#define pci_enable_msi(a) -ENOTSUPP -#undef pci_disable_msi -#define pci_disable_msi(a) do {} while (0) -#undef pci_enable_msix -#define pci_enable_msix(a, b, c) -ENOTSUPP -#undef pci_disable_msix -#define pci_disable_msix(a) do {} while (0) -#define msi_remove_pci_irq_vectors(a) do {} while (0) -#endif /* CONFIG_PCI_MSI */ -#ifdef DISABLE_PM -#undef CONFIG_PM -#endif - -#ifdef DISABLE_NET_POLL_CONTROLLER -#undef CONFIG_NET_POLL_CONTROLLER -#endif - -#ifndef PMSG_SUSPEND -#define PMSG_SUSPEND 3 -#endif - -/* generic boolean compatibility */ -#undef TRUE -#undef FALSE -#define TRUE true -#define FALSE false -#ifdef GCC_VERSION -#if ( GCC_VERSION < 3000 ) -#define _Bool char -#endif -#else -#define _Bool char -#endif - -/* kernels less than 2.4.14 don't have this */ -#ifndef ETH_P_8021Q -#define ETH_P_8021Q 0x8100 -#endif - -#ifndef module_param -#define module_param(v,t,p) MODULE_PARM(v, "i"); -#endif - -#ifndef DMA_64BIT_MASK -#define DMA_64BIT_MASK 0xffffffffffffffffULL -#endif - -#ifndef DMA_32BIT_MASK -#define DMA_32BIT_MASK 0x00000000ffffffffULL -#endif - -#ifndef PCI_CAP_ID_EXP -#define PCI_CAP_ID_EXP 0x10 -#endif - -#ifndef PCIE_LINK_STATE_L0S -#define PCIE_LINK_STATE_L0S 1 -#endif -#ifndef PCIE_LINK_STATE_L1 -#define PCIE_LINK_STATE_L1 2 -#endif - -#ifndef mmiowb -#ifdef CONFIG_IA64 -#define mmiowb() asm volatile ("mf.a" ::: "memory") -#else -#define mmiowb() -#endif -#endif - -#ifndef SET_NETDEV_DEV -#define SET_NETDEV_DEV(net, pdev) -#endif - -#if !defined(HAVE_FREE_NETDEV) && ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) -#define free_netdev(x) kfree(x) -#endif - -#ifdef HAVE_POLL_CONTROLLER -#define CONFIG_NET_POLL_CONTROLLER -#endif - -#ifndef SKB_DATAREF_SHIFT -/* if we do not have the infrastructure to detect if skb_header is cloned - just return false in all cases */ -#define skb_header_cloned(x) 0 -#endif - -#ifndef NETIF_F_GSO -#define gso_size tso_size -#define gso_segs tso_segs -#endif - -#ifndef NETIF_F_GRO -#define vlan_gro_receive(_napi, _vlgrp, _vlan, _skb) \ - vlan_hwaccel_receive_skb(_skb, _vlgrp, _vlan) -#define napi_gro_receive(_napi, _skb) netif_receive_skb(_skb) -#endif - -#ifndef NETIF_F_SCTP_CSUM -#define NETIF_F_SCTP_CSUM 0 -#endif - -#ifndef NETIF_F_LRO -#define NETIF_F_LRO (1 << 15) -#endif - -#ifndef NETIF_F_NTUPLE -#define NETIF_F_NTUPLE (1 << 27) -#endif - -#ifndef IPPROTO_SCTP -#define IPPROTO_SCTP 132 -#endif - -#ifndef CHECKSUM_PARTIAL -#define CHECKSUM_PARTIAL CHECKSUM_HW -#define CHECKSUM_COMPLETE CHECKSUM_HW -#endif - -#ifndef __read_mostly -#define __read_mostly -#endif - -#ifndef MII_RESV1 -#define MII_RESV1 0x17 /* Reserved... */ -#endif - -#ifndef unlikely -#define unlikely(_x) _x -#define likely(_x) _x -#endif - -#ifndef WARN_ON -#define WARN_ON(x) -#endif - -#ifndef PCI_DEVICE -#define PCI_DEVICE(vend,dev) \ - .vendor = (vend), .device = (dev), \ - .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID -#endif - -#ifndef node_online -#define node_online(node) ((node) == 0) -#endif - -#ifndef num_online_cpus -#define num_online_cpus() smp_num_cpus -#endif - -#ifndef cpu_online -#define cpu_online(cpuid) test_bit((cpuid), &cpu_online_map) -#endif - -#ifndef _LINUX_RANDOM_H -#include -#endif - -#ifndef DECLARE_BITMAP -#ifndef BITS_TO_LONGS -#define BITS_TO_LONGS(bits) (((bits)+BITS_PER_LONG-1)/BITS_PER_LONG) -#endif -#define DECLARE_BITMAP(name,bits) long name[BITS_TO_LONGS(bits)] -#endif - -#ifndef VLAN_HLEN -#define VLAN_HLEN 4 -#endif - -#ifndef VLAN_ETH_HLEN -#define VLAN_ETH_HLEN 18 -#endif - -#ifndef VLAN_ETH_FRAME_LEN -#define VLAN_ETH_FRAME_LEN 1518 -#endif - -#if !defined(IXGBE_DCA) && !defined(IGB_DCA) -#define dca_get_tag(b) 0 -#define dca_add_requester(a) -1 -#define dca_remove_requester(b) do { } while(0) -#define DCA_PROVIDER_ADD 0x0001 -#define DCA_PROVIDER_REMOVE 0x0002 -#endif - -#ifndef DCA_GET_TAG_TWO_ARGS -#define dca3_get_tag(a,b) dca_get_tag(b) -#endif - -#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#if defined(__i386__) || defined(__x86_64__) -#define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#endif -#endif - -/* taken from 2.6.24 definition in linux/kernel.h */ -#ifndef IS_ALIGNED -#define IS_ALIGNED(x,a) (((x) % ((typeof(x))(a))) == 0) -#endif - -#ifndef NETIF_F_HW_VLAN_TX -struct _kc_vlan_ethhdr { - unsigned char h_dest[ETH_ALEN]; - unsigned char h_source[ETH_ALEN]; - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - __be16 h_vlan_encapsulated_proto; -}; -#define vlan_ethhdr _kc_vlan_ethhdr -struct _kc_vlan_hdr { - __be16 h_vlan_TCI; - __be16 h_vlan_encapsulated_proto; -}; -#define vlan_hdr _kc_vlan_hdr -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) -#define vlan_tx_tag_present(_skb) 0 -#define vlan_tx_tag_get(_skb) 0 -#endif -#endif - -#ifndef VLAN_PRIO_SHIFT -#define VLAN_PRIO_SHIFT 13 -#endif - - -#ifndef __GFP_COLD -#define __GFP_COLD 0 -#endif - -/*****************************************************************************/ -/* Installations with ethtool version without eeprom, adapter id, or statistics - * support */ - -#ifndef ETH_GSTRING_LEN -#define ETH_GSTRING_LEN 32 -#endif - -#ifndef ETHTOOL_GSTATS -#define ETHTOOL_GSTATS 0x1d -#undef ethtool_drvinfo -#define ethtool_drvinfo k_ethtool_drvinfo -struct k_ethtool_drvinfo { - u32 cmd; - char driver[32]; - char version[32]; - char fw_version[32]; - char bus_info[32]; - char reserved1[32]; - char reserved2[16]; - u32 n_stats; - u32 testinfo_len; - u32 eedump_len; - u32 regdump_len; -}; - -struct ethtool_stats { - u32 cmd; - u32 n_stats; - u64 data[0]; -}; -#endif /* ETHTOOL_GSTATS */ - -#ifndef ETHTOOL_PHYS_ID -#define ETHTOOL_PHYS_ID 0x1c -#endif /* ETHTOOL_PHYS_ID */ - -#ifndef ETHTOOL_GSTRINGS -#define ETHTOOL_GSTRINGS 0x1b -enum ethtool_stringset { - ETH_SS_TEST = 0, - ETH_SS_STATS, -}; -struct ethtool_gstrings { - u32 cmd; /* ETHTOOL_GSTRINGS */ - u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - u32 len; /* number of strings in the string set */ - u8 data[0]; -}; -#endif /* ETHTOOL_GSTRINGS */ - -#ifndef ETHTOOL_TEST -#define ETHTOOL_TEST 0x1a -enum ethtool_test_flags { - ETH_TEST_FL_OFFLINE = (1 << 0), - ETH_TEST_FL_FAILED = (1 << 1), -}; -struct ethtool_test { - u32 cmd; - u32 flags; - u32 reserved; - u32 len; - u64 data[0]; -}; -#endif /* ETHTOOL_TEST */ - -#ifndef ETHTOOL_GEEPROM -#define ETHTOOL_GEEPROM 0xb -#undef ETHTOOL_GREGS -struct ethtool_eeprom { - u32 cmd; - u32 magic; - u32 offset; - u32 len; - u8 data[0]; -}; - -struct ethtool_value { - u32 cmd; - u32 data; -}; -#endif /* ETHTOOL_GEEPROM */ - -#ifndef ETHTOOL_GLINK -#define ETHTOOL_GLINK 0xa -#endif /* ETHTOOL_GLINK */ - -#ifndef ETHTOOL_GWOL -#define ETHTOOL_GWOL 0x5 -#define ETHTOOL_SWOL 0x6 -#define SOPASS_MAX 6 -struct ethtool_wolinfo { - u32 cmd; - u32 supported; - u32 wolopts; - u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ -}; -#endif /* ETHTOOL_GWOL */ - -#ifndef ETHTOOL_GREGS -#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers */ -#define ethtool_regs _kc_ethtool_regs -/* for passing big chunks of data */ -struct _kc_ethtool_regs { - u32 cmd; - u32 version; /* driver-specific, indicates different chips/revs */ - u32 len; /* bytes */ - u8 data[0]; -}; -#endif /* ETHTOOL_GREGS */ - -#ifndef ETHTOOL_GMSGLVL -#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#endif -#ifndef ETHTOOL_SMSGLVL -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ -#endif -#ifndef ETHTOOL_NWAY_RST -#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv */ -#endif -#ifndef ETHTOOL_GLINK -#define ETHTOOL_GLINK 0x0000000a /* Get link status */ -#endif -#ifndef ETHTOOL_GEEPROM -#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#endif -#ifndef ETHTOOL_SEEPROM -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data */ -#endif -#ifndef ETHTOOL_GCOALESCE -#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ -/* for configuring coalescing parameters of chip */ -#define ethtool_coalesce _kc_ethtool_coalesce -struct _kc_ethtool_coalesce { - u32 cmd; /* ETHTOOL_{G,S}COALESCE */ - - /* How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only rx_max_coalesced_frames - * is used. - */ - u32 rx_coalesce_usecs; - - /* How many packets to delay an RX interrupt after - * a packet arrives. If 0, only rx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause RX interrupts to never be - * generated. - */ - u32 rx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ - u32 rx_coalesce_usecs_irq; - u32 rx_max_coalesced_frames_irq; - - /* How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only tx_max_coalesced_frames - * is used. - */ - u32 tx_coalesce_usecs; - - /* How many packets to delay a TX interrupt after - * a packet is sent. If 0, only tx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause TX interrupts to never be - * generated. - */ - u32 tx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ - u32 tx_coalesce_usecs_irq; - u32 tx_max_coalesced_frames_irq; - - /* How many usecs to delay in-memory statistics - * block updates. Some drivers do not have an in-memory - * statistic block, and in such cases this value is ignored. - * This value must not be zero. - */ - u32 stats_block_coalesce_usecs; - - /* Adaptive RX/TX coalescing is an algorithm implemented by - * some drivers to improve latency under low packet rates and - * improve throughput under high packet rates. Some drivers - * only implement one of RX or TX adaptive coalescing. Anything - * not implemented by the driver causes these values to be - * silently ignored. - */ - u32 use_adaptive_rx_coalesce; - u32 use_adaptive_tx_coalesce; - - /* When the packet rate (measured in packets per second) - * is below pkt_rate_low, the {rx,tx}_*_low parameters are - * used. - */ - u32 pkt_rate_low; - u32 rx_coalesce_usecs_low; - u32 rx_max_coalesced_frames_low; - u32 tx_coalesce_usecs_low; - u32 tx_max_coalesced_frames_low; - - /* When the packet rate is below pkt_rate_high but above - * pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ - - /* When the packet rate is (measured in packets per second) - * is above pkt_rate_high, the {rx,tx}_*_high parameters are - * used. - */ - u32 pkt_rate_high; - u32 rx_coalesce_usecs_high; - u32 rx_max_coalesced_frames_high; - u32 tx_coalesce_usecs_high; - u32 tx_max_coalesced_frames_high; - - /* How often to do adaptive coalescing packet rate sampling, - * measured in seconds. Must not be zero. - */ - u32 rate_sample_interval; -}; -#endif /* ETHTOOL_GCOALESCE */ - -#ifndef ETHTOOL_SCOALESCE -#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ -#endif -#ifndef ETHTOOL_GRINGPARAM -#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ -/* for configuring RX/TX ring parameters */ -#define ethtool_ringparam _kc_ethtool_ringparam -struct _kc_ethtool_ringparam { - u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ - u32 rx_max_pending; - u32 rx_mini_max_pending; - u32 rx_jumbo_max_pending; - u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ - u32 rx_pending; - u32 rx_mini_pending; - u32 rx_jumbo_pending; - u32 tx_pending; -}; -#endif /* ETHTOOL_GRINGPARAM */ - -#ifndef ETHTOOL_SRINGPARAM -#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ -#endif -#ifndef ETHTOOL_GPAUSEPARAM -#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ -/* for configuring link flow control parameters */ -#define ethtool_pauseparam _kc_ethtool_pauseparam -struct _kc_ethtool_pauseparam { - u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ - u32 autoneg; - u32 rx_pause; - u32 tx_pause; -}; -#endif /* ETHTOOL_GPAUSEPARAM */ - -#ifndef ETHTOOL_SPAUSEPARAM -#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ -#endif -#ifndef ETHTOOL_GRXCSUM -#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_SRXCSUM -#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_GTXCSUM -#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_STXCSUM -#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_GSG -#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable - * (ethtool_value) */ -#endif -#ifndef ETHTOOL_SSG -#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable - * (ethtool_value). */ -#endif -#ifndef ETHTOOL_TEST -#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ -#endif -#ifndef ETHTOOL_GSTRINGS -#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ -#endif -#ifndef ETHTOOL_PHYS_ID -#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ -#endif -#ifndef ETHTOOL_GSTATS -#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ -#endif -#ifndef ETHTOOL_GTSO -#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ -#endif -#ifndef ETHTOOL_STSO -#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ -#endif - -#ifndef ETHTOOL_BUSINFO_LEN -#define ETHTOOL_BUSINFO_LEN 32 -#endif - -#ifndef RHEL_RELEASE_CODE -/* NOTE: RHEL_RELEASE_* introduced in RHEL4.5 */ -#define RHEL_RELEASE_CODE 0 -#endif -#ifndef RHEL_RELEASE_VERSION -#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b)) -#endif -#ifndef AX_RELEASE_CODE -#define AX_RELEASE_CODE 0 -#endif -#ifndef AX_RELEASE_VERSION -#define AX_RELEASE_VERSION(a,b) (((a) << 8) + (b)) -#endif - -/* SuSE version macro is the same as Linux kernel version */ -#ifndef SLE_VERSION -#define SLE_VERSION(a,b,c) KERNEL_VERSION(a,b,c) -#endif -#ifndef SLE_VERSION_CODE -#ifdef CONFIG_SUSE_KERNEL -/* SLES11 GA is 2.6.27 based */ -#if ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,27) ) -#define SLE_VERSION_CODE SLE_VERSION(11,0,0) -#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,32) ) -/* SLES11 SP1 is 2.6.32 based */ -#define SLE_VERSION_CODE SLE_VERSION(11,1,0) -#else -#define SLE_VERSION_CODE 0 -#endif -#else /* CONFIG_SUSE_KERNEL */ -#define SLE_VERSION_CODE 0 -#endif /* CONFIG_SUSE_KERNEL */ -#endif /* SLE_VERSION_CODE */ - -#ifdef __KLOCWORK__ -#ifdef ARRAY_SIZE -#undef ARRAY_SIZE -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#endif -#endif /* __KLOCWORK__ */ - -/*****************************************************************************/ -/* 2.4.3 => 2.4.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) ) - -/**************************************/ -/* PCI DRIVER API */ - -#ifndef pci_set_dma_mask -#define pci_set_dma_mask _kc_pci_set_dma_mask -extern int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask); -#endif - -#ifndef pci_request_regions -#define pci_request_regions _kc_pci_request_regions -extern int _kc_pci_request_regions(struct pci_dev *pdev, char *res_name); -#endif - -#ifndef pci_release_regions -#define pci_release_regions _kc_pci_release_regions -extern void _kc_pci_release_regions(struct pci_dev *pdev); -#endif - -/**************************************/ -/* NETWORK DRIVER API */ - -#ifndef alloc_etherdev -#define alloc_etherdev _kc_alloc_etherdev -extern struct net_device * _kc_alloc_etherdev(int sizeof_priv); -#endif - -#ifndef is_valid_ether_addr -#define is_valid_ether_addr _kc_is_valid_ether_addr -extern int _kc_is_valid_ether_addr(u8 *addr); -#endif - -/**************************************/ -/* MISCELLANEOUS */ - -#ifndef INIT_TQUEUE -#define INIT_TQUEUE(_tq, _routine, _data) \ - do { \ - INIT_LIST_HEAD(&(_tq)->list); \ - (_tq)->sync = 0; \ - (_tq)->routine = _routine; \ - (_tq)->data = _data; \ - } while (0) -#endif - -#endif /* 2.4.3 => 2.4.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) ) -/* Generic MII registers. */ -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -/* Basic mode control register. */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -/* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -/* Advertisement control register. */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) -/* Expansion register for auto-negotiation. */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#endif - -/*****************************************************************************/ -/* 2.4.6 => 2.4.3 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) ) - -#ifndef pci_set_power_state -#define pci_set_power_state _kc_pci_set_power_state -extern int _kc_pci_set_power_state(struct pci_dev *dev, int state); -#endif - -#ifndef pci_enable_wake -#define pci_enable_wake _kc_pci_enable_wake -extern int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable); -#endif - -#ifndef pci_disable_device -#define pci_disable_device _kc_pci_disable_device -extern void _kc_pci_disable_device(struct pci_dev *pdev); -#endif - -/* PCI PM entry point syntax changed, so don't support suspend/resume */ -#undef CONFIG_PM - -#endif /* 2.4.6 => 2.4.3 */ - -#ifndef HAVE_PCI_SET_MWI -#define pci_set_mwi(X) pci_write_config_word(X, \ - PCI_COMMAND, adapter->hw.bus.pci_cmd_word | \ - PCI_COMMAND_INVALIDATE); -#define pci_clear_mwi(X) pci_write_config_word(X, \ - PCI_COMMAND, adapter->hw.bus.pci_cmd_word & \ - ~PCI_COMMAND_INVALIDATE); -#endif - -/*****************************************************************************/ -/* 2.4.10 => 2.4.9 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) ) - -/**************************************/ -/* MODULE API */ - -#ifndef MODULE_LICENSE - #define MODULE_LICENSE(X) -#endif - -/**************************************/ -/* OTHER */ - -#undef min -#define min(x,y) ({ \ - const typeof(x) _x = (x); \ - const typeof(y) _y = (y); \ - (void) (&_x == &_y); \ - _x < _y ? _x : _y; }) - -#undef max -#define max(x,y) ({ \ - const typeof(x) _x = (x); \ - const typeof(y) _y = (y); \ - (void) (&_x == &_y); \ - _x > _y ? _x : _y; }) - -#define min_t(type,x,y) ({ \ - type _x = (x); \ - type _y = (y); \ - _x < _y ? _x : _y; }) - -#define max_t(type,x,y) ({ \ - type _x = (x); \ - type _y = (y); \ - _x > _y ? _x : _y; }) - -#ifndef list_for_each_safe -#define list_for_each_safe(pos, n, head) \ - for (pos = (head)->next, n = pos->next; pos != (head); \ - pos = n, n = pos->next) -#endif - -#ifndef ____cacheline_aligned_in_smp -#ifdef CONFIG_SMP -#define ____cacheline_aligned_in_smp ____cacheline_aligned -#else -#define ____cacheline_aligned_in_smp -#endif /* CONFIG_SMP */ -#endif - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) ) -extern int _kc_snprintf(char * buf, size_t size, const char *fmt, ...); -#define snprintf(buf, size, fmt, args...) _kc_snprintf(buf, size, fmt, ##args) -extern int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args); -#define vsnprintf(buf, size, fmt, args) _kc_vsnprintf(buf, size, fmt, args) -#else /* 2.4.8 => 2.4.9 */ -extern int snprintf(char * buf, size_t size, const char *fmt, ...); -extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args); -#endif -#endif /* 2.4.10 -> 2.4.6 */ - - -/*****************************************************************************/ -/* 2.4.12 => 2.4.10 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,12) ) -#ifndef HAVE_NETIF_MSG -#define HAVE_NETIF_MSG 1 -enum { - NETIF_MSG_DRV = 0x0001, - NETIF_MSG_PROBE = 0x0002, - NETIF_MSG_LINK = 0x0004, - NETIF_MSG_TIMER = 0x0008, - NETIF_MSG_IFDOWN = 0x0010, - NETIF_MSG_IFUP = 0x0020, - NETIF_MSG_RX_ERR = 0x0040, - NETIF_MSG_TX_ERR = 0x0080, - NETIF_MSG_TX_QUEUED = 0x0100, - NETIF_MSG_INTR = 0x0200, - NETIF_MSG_TX_DONE = 0x0400, - NETIF_MSG_RX_STATUS = 0x0800, - NETIF_MSG_PKTDATA = 0x1000, - NETIF_MSG_HW = 0x2000, - NETIF_MSG_WOL = 0x4000, -}; - -#define netif_msg_drv(p) ((p)->msg_enable & NETIF_MSG_DRV) -#define netif_msg_probe(p) ((p)->msg_enable & NETIF_MSG_PROBE) -#define netif_msg_link(p) ((p)->msg_enable & NETIF_MSG_LINK) -#define netif_msg_timer(p) ((p)->msg_enable & NETIF_MSG_TIMER) -#define netif_msg_ifdown(p) ((p)->msg_enable & NETIF_MSG_IFDOWN) -#define netif_msg_ifup(p) ((p)->msg_enable & NETIF_MSG_IFUP) -#define netif_msg_rx_err(p) ((p)->msg_enable & NETIF_MSG_RX_ERR) -#define netif_msg_tx_err(p) ((p)->msg_enable & NETIF_MSG_TX_ERR) -#define netif_msg_tx_queued(p) ((p)->msg_enable & NETIF_MSG_TX_QUEUED) -#define netif_msg_intr(p) ((p)->msg_enable & NETIF_MSG_INTR) -#define netif_msg_tx_done(p) ((p)->msg_enable & NETIF_MSG_TX_DONE) -#define netif_msg_rx_status(p) ((p)->msg_enable & NETIF_MSG_RX_STATUS) -#define netif_msg_pktdata(p) ((p)->msg_enable & NETIF_MSG_PKTDATA) -#endif /* !HAVE_NETIF_MSG */ -#endif /* 2.4.12 => 2.4.10 */ - -/*****************************************************************************/ -/* 2.4.13 => 2.4.12 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) ) - -/**************************************/ -/* PCI DMA MAPPING */ - -#ifndef virt_to_page - #define virt_to_page(v) (mem_map + (virt_to_phys(v) >> PAGE_SHIFT)) -#endif - -#ifndef pci_map_page -#define pci_map_page _kc_pci_map_page -extern u64 _kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, size_t size, int direction); -#endif - -#ifndef pci_unmap_page -#define pci_unmap_page _kc_pci_unmap_page -extern void _kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size, int direction); -#endif - -/* pci_set_dma_mask takes dma_addr_t, which is only 32-bits prior to 2.4.13 */ - -#undef DMA_32BIT_MASK -#define DMA_32BIT_MASK 0xffffffff -#undef DMA_64BIT_MASK -#define DMA_64BIT_MASK 0xffffffff - -/**************************************/ -/* OTHER */ - -#ifndef cpu_relax -#define cpu_relax() rep_nop() -#endif - -struct vlan_ethhdr { - unsigned char h_dest[ETH_ALEN]; - unsigned char h_source[ETH_ALEN]; - unsigned short h_vlan_proto; - unsigned short h_vlan_TCI; - unsigned short h_vlan_encapsulated_proto; -}; -#endif /* 2.4.13 => 2.4.12 */ - -/*****************************************************************************/ -/* 2.4.17 => 2.4.12 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17) ) - -#ifndef __devexit_p - #define __devexit_p(x) &(x) -#endif - -#endif /* 2.4.17 => 2.4.13 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,18) ) -#define NETIF_MSG_HW 0x2000 -#define NETIF_MSG_WOL 0x4000 - -#ifndef netif_msg_hw -#define netif_msg_hw(p) ((p)->msg_enable & NETIF_MSG_HW) -#endif -#ifndef netif_msg_wol -#define netif_msg_wol(p) ((p)->msg_enable & NETIF_MSG_WOL) -#endif -#endif /* 2.4.18 */ - -/*****************************************************************************/ - -/*****************************************************************************/ -/* 2.4.20 => 2.4.19 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20) ) - -/* we won't support NAPI on less than 2.4.20 */ -#ifdef NAPI -#undef NAPI -#undef CONFIG_IXGBE_NAPI -#endif - -#endif /* 2.4.20 => 2.4.19 */ - -/*****************************************************************************/ -/* 2.4.22 => 2.4.17 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) -#define pci_name(x) ((x)->slot_name) -#endif - -/*****************************************************************************/ -/* 2.4.22 => 2.4.17 */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) -#ifndef IXGBE_NO_LRO -/* Don't enable LRO for these legacy kernels */ -#define IXGBE_NO_LRO -#endif -#endif - -/*****************************************************************************/ -/*****************************************************************************/ -/* 2.4.23 => 2.4.22 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) ) -/*****************************************************************************/ -#ifdef NAPI -#ifndef netif_poll_disable -#define netif_poll_disable(x) _kc_netif_poll_disable(x) -static inline void _kc_netif_poll_disable(struct net_device *netdev) -{ - while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) { - /* No hurry */ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } -} -#endif -#ifndef netif_poll_enable -#define netif_poll_enable(x) _kc_netif_poll_enable(x) -static inline void _kc_netif_poll_enable(struct net_device *netdev) -{ - clear_bit(__LINK_STATE_RX_SCHED, &netdev->state); -} -#endif -#endif /* NAPI */ -#ifndef netif_tx_disable -#define netif_tx_disable(x) _kc_netif_tx_disable(x) -static inline void _kc_netif_tx_disable(struct net_device *dev) -{ - spin_lock_bh(&dev->xmit_lock); - netif_stop_queue(dev); - spin_unlock_bh(&dev->xmit_lock); -} -#endif -#else /* 2.4.23 => 2.4.22 */ -#define HAVE_SCTP -#endif /* 2.4.23 => 2.4.22 */ - -/*****************************************************************************/ -/* 2.6.4 => 2.6.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,25) || \ - ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ - LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) ) -#define ETHTOOL_OPS_COMPAT -#endif /* 2.6.4 => 2.6.0 */ - -/*****************************************************************************/ -/* 2.5.71 => 2.4.x */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,71) ) -#define sk_protocol protocol -#define pci_get_device pci_find_device -#endif /* 2.5.70 => 2.4.x */ - -/*****************************************************************************/ -/* < 2.4.27 or 2.6.0 <= 2.6.5 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) || \ - ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ - LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) ) - -#ifndef netif_msg_init -#define netif_msg_init _kc_netif_msg_init -static inline u32 _kc_netif_msg_init(int debug_value, int default_msg_enable_bits) -{ - /* use default */ - if (debug_value < 0 || debug_value >= (sizeof(u32) * 8)) - return default_msg_enable_bits; - if (debug_value == 0) /* no output */ - return 0; - /* set low N bits */ - return (1 << debug_value) -1; -} -#endif - -#endif /* < 2.4.27 or 2.6.0 <= 2.6.5 */ -/*****************************************************************************/ -#if (( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) || \ - (( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) && \ - ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ))) -#define netdev_priv(x) x->priv -#endif - -/*****************************************************************************/ -/* <= 2.5.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ) -#include -#undef pci_register_driver -#define pci_register_driver pci_module_init - -/* - * Most of the dma compat code is copied/modified from the 2.4.37 - * /include/linux/libata-compat.h header file - */ -/* These definitions mirror those in pci.h, so they can be used - * interchangeably with their PCI_ counterparts */ -enum dma_data_direction { - DMA_BIDIRECTIONAL = 0, - DMA_TO_DEVICE = 1, - DMA_FROM_DEVICE = 2, - DMA_NONE = 3, -}; - -struct device { - struct pci_dev pdev; -}; - -static inline struct pci_dev *to_pci_dev (struct device *dev) -{ - return (struct pci_dev *) dev; -} -static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) -{ - return (struct device *) pdev; -} - -#define pdev_printk(lvl, pdev, fmt, args...) \ - printk("%s %s: " fmt, lvl, pci_name(pdev), ## args) -#define dev_err(dev, fmt, args...) \ - pdev_printk(KERN_ERR, to_pci_dev(dev), fmt, ## args) -#define dev_info(dev, fmt, args...) \ - pdev_printk(KERN_INFO, to_pci_dev(dev), fmt, ## args) -#define dev_warn(dev, fmt, args...) \ - pdev_printk(KERN_WARNING, to_pci_dev(dev), fmt, ## args) - -/* NOTE: dangerous! we ignore the 'gfp' argument */ -#define dma_alloc_coherent(dev,sz,dma,gfp) \ - pci_alloc_consistent(to_pci_dev(dev),(sz),(dma)) -#define dma_free_coherent(dev,sz,addr,dma_addr) \ - pci_free_consistent(to_pci_dev(dev),(sz),(addr),(dma_addr)) - -#define dma_map_page(dev,a,b,c,d) \ - pci_map_page(to_pci_dev(dev),(a),(b),(c),(d)) -#define dma_unmap_page(dev,a,b,c) \ - pci_unmap_page(to_pci_dev(dev),(a),(b),(c)) - -#define dma_map_single(dev,a,b,c) \ - pci_map_single(to_pci_dev(dev),(a),(b),(c)) -#define dma_unmap_single(dev,a,b,c) \ - pci_unmap_single(to_pci_dev(dev),(a),(b),(c)) - -#define dma_sync_single(dev,a,b,c) \ - pci_dma_sync_single(to_pci_dev(dev),(a),(b),(c)) - -/* for range just sync everything, that's all the pci API can do */ -#define dma_sync_single_range(dev,addr,off,sz,dir) \ - pci_dma_sync_single(to_pci_dev(dev),(addr),(off)+(sz),(dir)) - -#define dma_set_mask(dev,mask) \ - pci_set_dma_mask(to_pci_dev(dev),(mask)) - -/* hlist_* code - double linked lists */ -struct hlist_head { - struct hlist_node *first; -}; - -struct hlist_node { - struct hlist_node *next, **pprev; -}; - -static inline void __hlist_del(struct hlist_node *n) -{ - struct hlist_node *next = n->next; - struct hlist_node **pprev = n->pprev; - *pprev = next; - if (next) - next->pprev = pprev; -} - -static inline void hlist_del(struct hlist_node *n) -{ - __hlist_del(n); - n->next = NULL; - n->pprev = NULL; -} - -static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) -{ - struct hlist_node *first = h->first; - n->next = first; - if (first) - first->pprev = &n->next; - h->first = n; - n->pprev = &h->first; -} - -static inline int hlist_empty(const struct hlist_head *h) -{ - return !h->first; -} -#define HLIST_HEAD_INIT { .first = NULL } -#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } -#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) -static inline void INIT_HLIST_NODE(struct hlist_node *h) -{ - h->next = NULL; - h->pprev = NULL; -} -#define hlist_entry(ptr, type, member) container_of(ptr,type,member) - -#define hlist_for_each_entry(tpos, pos, head, member) \ - for (pos = (head)->first; \ - pos && ({ prefetch(pos->next); 1;}) && \ - ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ - pos = pos->next) - -#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \ - for (pos = (head)->first; \ - pos && ({ n = pos->next; 1; }) && \ - ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ - pos = n) - -#ifndef might_sleep -#define might_sleep() -#endif -#else -static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) -{ - return &pdev->dev; -} -#endif /* <= 2.5.0 */ - -/*****************************************************************************/ -/* 2.5.28 => 2.4.23 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) - -static inline void _kc_synchronize_irq(void) -{ - synchronize_irq(); -} -#undef synchronize_irq -#define synchronize_irq(X) _kc_synchronize_irq() - -#include -#define work_struct tq_struct -#undef INIT_WORK -#define INIT_WORK(a,b) INIT_TQUEUE(a,(void (*)(void *))b,a) -#undef container_of -#define container_of list_entry -#define schedule_work schedule_task -#define flush_scheduled_work flush_scheduled_tasks -#define cancel_work_sync(x) flush_scheduled_work() - -#endif /* 2.5.28 => 2.4.17 */ - -/*****************************************************************************/ -/* 2.6.0 => 2.5.28 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) -#undef get_cpu -#define get_cpu() smp_processor_id() -#undef put_cpu -#define put_cpu() do { } while(0) -#define MODULE_INFO(version, _version) -#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT -#define CONFIG_E1000_DISABLE_PACKET_SPLIT 1 -#endif -#define CONFIG_IGB_DISABLE_PACKET_SPLIT 1 - -#define dma_set_coherent_mask(dev,mask) 1 - -#undef dev_put -#define dev_put(dev) __dev_put(dev) - -#ifndef skb_fill_page_desc -#define skb_fill_page_desc _kc_skb_fill_page_desc -extern void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page, int off, int size); -#endif - -#undef ALIGN -#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1)) - -#ifndef page_count -#define page_count(p) atomic_read(&(p)->count) -#endif - -#ifdef MAX_NUMNODES -#undef MAX_NUMNODES -#endif -#define MAX_NUMNODES 1 - -/* find_first_bit and find_next bit are not defined for most - * 2.4 kernels (except for the redhat 2.4.21 kernels - */ -#include -#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) -#undef find_next_bit -#define find_next_bit _kc_find_next_bit -extern unsigned long _kc_find_next_bit(const unsigned long *addr, - unsigned long size, - unsigned long offset); -#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) - - -#ifndef netdev_name -static inline const char *_kc_netdev_name(const struct net_device *dev) -{ - if (strchr(dev->name, '%')) - return "(unregistered net_device)"; - return dev->name; -} -#define netdev_name(netdev) _kc_netdev_name(netdev) -#endif /* netdev_name */ - -#ifndef strlcpy -#define strlcpy _kc_strlcpy -extern size_t _kc_strlcpy(char *dest, const char *src, size_t size); -#endif /* strlcpy */ - -#endif /* 2.6.0 => 2.5.28 */ - -/*****************************************************************************/ -/* 2.6.4 => 2.6.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) -#define MODULE_VERSION(_version) MODULE_INFO(version, _version) -#endif /* 2.6.4 => 2.6.0 */ - -/*****************************************************************************/ -/* 2.6.5 => 2.6.0 */ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) -#define dma_sync_single_for_cpu dma_sync_single -#define dma_sync_single_for_device dma_sync_single -#define dma_sync_single_range_for_cpu dma_sync_single_range -#define dma_sync_single_range_for_device dma_sync_single_range -#ifndef pci_dma_mapping_error -#define pci_dma_mapping_error _kc_pci_dma_mapping_error -static inline int _kc_pci_dma_mapping_error(dma_addr_t dma_addr) -{ - return dma_addr == 0; -} -#endif -#endif /* 2.6.5 => 2.6.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) -extern int _kc_scnprintf(char * buf, size_t size, const char *fmt, ...); -#define scnprintf(buf, size, fmt, args...) _kc_scnprintf(buf, size, fmt, ##args) -#endif /* < 2.6.4 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6) ) -/* taken from 2.6 include/linux/bitmap.h */ -#undef bitmap_zero -#define bitmap_zero _kc_bitmap_zero -static inline void _kc_bitmap_zero(unsigned long *dst, int nbits) -{ - if (nbits <= BITS_PER_LONG) - *dst = 0UL; - else { - int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long); - memset(dst, 0, len); - } -} -#define random_ether_addr _kc_random_ether_addr -static inline void _kc_random_ether_addr(u8 *addr) -{ - get_random_bytes(addr, ETH_ALEN); - addr[0] &= 0xfe; /* clear multicast */ - addr[0] |= 0x02; /* set local assignment */ -} -#define page_to_nid(x) 0 - -#endif /* < 2.6.6 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7) ) -#undef if_mii -#define if_mii _kc_if_mii -static inline struct mii_ioctl_data *_kc_if_mii(struct ifreq *rq) -{ - return (struct mii_ioctl_data *) &rq->ifr_ifru; -} - -#ifndef __force -#define __force -#endif -#endif /* < 2.6.7 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) -#ifndef PCI_EXP_DEVCTL -#define PCI_EXP_DEVCTL 8 -#endif -#ifndef PCI_EXP_DEVCTL_CERE -#define PCI_EXP_DEVCTL_CERE 0x0001 -#endif -#define msleep(x) do { set_current_state(TASK_UNINTERRUPTIBLE); \ - schedule_timeout((x * HZ)/1000 + 2); \ - } while (0) - -#endif /* < 2.6.8 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)) -#include -#define __iomem - -#ifndef kcalloc -#define kcalloc(n, size, flags) _kc_kzalloc(((n) * (size)), flags) -extern void *_kc_kzalloc(size_t size, int flags); -#endif -#define MSEC_PER_SEC 1000L -static inline unsigned int _kc_jiffies_to_msecs(const unsigned long j) -{ -#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) - return (MSEC_PER_SEC / HZ) * j; -#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) - return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC); -#else - return (j * MSEC_PER_SEC) / HZ; -#endif -} -static inline unsigned long _kc_msecs_to_jiffies(const unsigned int m) -{ - if (m > _kc_jiffies_to_msecs(MAX_JIFFY_OFFSET)) - return MAX_JIFFY_OFFSET; -#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) - return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ); -#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) - return m * (HZ / MSEC_PER_SEC); -#else - return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC; -#endif -} - -#define msleep_interruptible _kc_msleep_interruptible -static inline unsigned long _kc_msleep_interruptible(unsigned int msecs) -{ - unsigned long timeout = _kc_msecs_to_jiffies(msecs) + 1; - - while (timeout && !signal_pending(current)) { - __set_current_state(TASK_INTERRUPTIBLE); - timeout = schedule_timeout(timeout); - } - return _kc_jiffies_to_msecs(timeout); -} - -/* Basic mode control register. */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ - -#ifndef __le16 -#define __le16 u16 -#endif -#ifndef __le32 -#define __le32 u32 -#endif -#ifndef __le64 -#define __le64 u64 -#endif -#ifndef __be16 -#define __be16 u16 -#endif -#ifndef __be32 -#define __be32 u32 -#endif -#ifndef __be64 -#define __be64 u64 -#endif - -static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb) -{ - return (struct vlan_ethhdr *)skb->mac.raw; -} - -/* Wake-On-Lan options. */ -#define WAKE_PHY (1 << 0) -#define WAKE_UCAST (1 << 1) -#define WAKE_MCAST (1 << 2) -#define WAKE_BCAST (1 << 3) -#define WAKE_ARP (1 << 4) -#define WAKE_MAGIC (1 << 5) -#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ - -#define skb_header_pointer _kc_skb_header_pointer -static inline void *_kc_skb_header_pointer(const struct sk_buff *skb, - int offset, int len, void *buffer) -{ - int hlen = skb_headlen(skb); - - if (hlen - offset >= len) - return skb->data + offset; - -#ifdef MAX_SKB_FRAGS - if (skb_copy_bits(skb, offset, buffer, len) < 0) - return NULL; - - return buffer; -#else - return NULL; -#endif - -#ifndef NETDEV_TX_OK -#define NETDEV_TX_OK 0 -#endif -#ifndef NETDEV_TX_BUSY -#define NETDEV_TX_BUSY 1 -#endif -#ifndef NETDEV_TX_LOCKED -#define NETDEV_TX_LOCKED -1 -#endif -} - -#ifndef __bitwise -#define __bitwise -#endif -#endif /* < 2.6.9 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) -#ifdef module_param_array_named -#undef module_param_array_named -#define module_param_array_named(name, array, type, nump, perm) \ - static struct kparam_array __param_arr_##name \ - = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type, \ - sizeof(array[0]), array }; \ - module_param_call(name, param_array_set, param_array_get, \ - &__param_arr_##name, perm) -#endif /* module_param_array_named */ -/* - * num_online is broken for all < 2.6.10 kernels. This is needed to support - * Node module parameter of ixgbe. - */ -#undef num_online_nodes -#define num_online_nodes(n) 1 -extern DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES); -#undef node_online_map -#define node_online_map _kcompat_node_online_map -#endif /* < 2.6.10 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) ) -#define PCI_D0 0 -#define PCI_D1 1 -#define PCI_D2 2 -#define PCI_D3hot 3 -#define PCI_D3cold 4 -typedef int pci_power_t; -#define pci_choose_state(pdev,state) state -#define PMSG_SUSPEND 3 -#define PCI_EXP_LNKCTL 16 - -#undef NETIF_F_LLTX - -#ifndef ARCH_HAS_PREFETCH -#define prefetch(X) -#endif - -#ifndef NET_IP_ALIGN -#define NET_IP_ALIGN 2 -#endif - -#define KC_USEC_PER_SEC 1000000L -#define usecs_to_jiffies _kc_usecs_to_jiffies -static inline unsigned int _kc_jiffies_to_usecs(const unsigned long j) -{ -#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) - return (KC_USEC_PER_SEC / HZ) * j; -#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) - return (j + (HZ / KC_USEC_PER_SEC) - 1)/(HZ / KC_USEC_PER_SEC); -#else - return (j * KC_USEC_PER_SEC) / HZ; -#endif -} -static inline unsigned long _kc_usecs_to_jiffies(const unsigned int m) -{ - if (m > _kc_jiffies_to_usecs(MAX_JIFFY_OFFSET)) - return MAX_JIFFY_OFFSET; -#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) - return (m + (KC_USEC_PER_SEC / HZ) - 1) / (KC_USEC_PER_SEC / HZ); -#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) - return m * (HZ / KC_USEC_PER_SEC); -#else - return (m * HZ + KC_USEC_PER_SEC - 1) / KC_USEC_PER_SEC; -#endif -} -#endif /* < 2.6.11 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12) ) -#include -#define USE_REBOOT_NOTIFIER - -/* Generic MII registers. */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -/* Advertisement control register. */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ -#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymmetric pause */ -/* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#ifndef is_zero_ether_addr -#define is_zero_ether_addr _kc_is_zero_ether_addr -static inline int _kc_is_zero_ether_addr(const u8 *addr) -{ - return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]); -} -#endif /* is_zero_ether_addr */ -#ifndef is_multicast_ether_addr -#define is_multicast_ether_addr _kc_is_multicast_ether_addr -static inline int _kc_is_multicast_ether_addr(const u8 *addr) -{ - return addr[0] & 0x01; -} -#endif /* is_multicast_ether_addr */ -#endif /* < 2.6.12 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) ) -#ifndef kstrdup -#define kstrdup _kc_kstrdup -extern char *_kc_kstrdup(const char *s, unsigned int gfp); -#endif -#endif /* < 2.6.13 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ) -#define pm_message_t u32 -#ifndef kzalloc -#define kzalloc _kc_kzalloc -extern void *_kc_kzalloc(size_t size, int flags); -#endif - -/* Generic MII registers. */ -#define MII_ESTATUS 0x0f /* Extended Status */ -/* Basic mode status register. */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -/* Extended status register. */ -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ - -#define ADVERTISED_Pause (1 << 13) -#define ADVERTISED_Asym_Pause (1 << 14) - -#if (!(RHEL_RELEASE_CODE && \ - (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,3)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)))) -#if ((LINUX_VERSION_CODE == KERNEL_VERSION(2,6,9)) && !defined(gfp_t)) -#define gfp_t unsigned -#else -typedef unsigned gfp_t; -#endif -#endif /* !RHEL4.3->RHEL5.0 */ - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9) ) -#ifdef CONFIG_X86_64 -#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir) \ - dma_sync_single_for_cpu(dev, dma_handle, size, dir) -#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir) \ - dma_sync_single_for_device(dev, dma_handle, size, dir) -#endif -#endif -#endif /* < 2.6.14 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) ) -#ifndef vmalloc_node -#define vmalloc_node(a,b) vmalloc(a) -#endif /* vmalloc_node*/ - -#define setup_timer(_timer, _function, _data) \ -do { \ - (_timer)->function = _function; \ - (_timer)->data = _data; \ - init_timer(_timer); \ -} while (0) -#ifndef device_can_wakeup -#define device_can_wakeup(dev) (1) -#endif -#ifndef device_set_wakeup_enable -#define device_set_wakeup_enable(dev, val) do{}while(0) -#endif -#ifndef device_init_wakeup -#define device_init_wakeup(dev,val) do {} while (0) -#endif -static inline unsigned _kc_compare_ether_addr(const u8 *addr1, const u8 *addr2) -{ - const u16 *a = (const u16 *) addr1; - const u16 *b = (const u16 *) addr2; - - return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; -} -#undef compare_ether_addr -#define compare_ether_addr(addr1, addr2) _kc_compare_ether_addr(addr1, addr2) -#endif /* < 2.6.15 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) ) -#undef DEFINE_MUTEX -#define DEFINE_MUTEX(x) DECLARE_MUTEX(x) -#define mutex_lock(x) down_interruptible(x) -#define mutex_unlock(x) up(x) - -#ifndef ____cacheline_internodealigned_in_smp -#ifdef CONFIG_SMP -#define ____cacheline_internodealigned_in_smp ____cacheline_aligned_in_smp -#else -#define ____cacheline_internodealigned_in_smp -#endif /* CONFIG_SMP */ -#endif /* ____cacheline_internodealigned_in_smp */ -#undef HAVE_PCI_ERS -#else /* 2.6.16 and above */ -#undef HAVE_PCI_ERS -#define HAVE_PCI_ERS -#endif /* < 2.6.16 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17) ) -#ifndef first_online_node -#define first_online_node 0 -#endif -#ifndef NET_SKB_PAD -#define NET_SKB_PAD 16 -#endif -#endif /* < 2.6.17 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ) - -#ifndef IRQ_HANDLED -#define irqreturn_t void -#define IRQ_HANDLED -#define IRQ_NONE -#endif - -#ifndef IRQF_PROBE_SHARED -#ifdef SA_PROBEIRQ -#define IRQF_PROBE_SHARED SA_PROBEIRQ -#else -#define IRQF_PROBE_SHARED 0 -#endif -#endif - -#ifndef IRQF_SHARED -#define IRQF_SHARED SA_SHIRQ -#endif - -#ifndef ARRAY_SIZE -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#endif - -#ifndef FIELD_SIZEOF -#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) -#endif - -#ifndef skb_is_gso -#ifdef NETIF_F_TSO -#define skb_is_gso _kc_skb_is_gso -static inline int _kc_skb_is_gso(const struct sk_buff *skb) -{ - return skb_shinfo(skb)->gso_size; -} -#else -#define skb_is_gso(a) 0 -#endif -#endif - -#ifndef resource_size_t -#define resource_size_t unsigned long -#endif - -#ifdef skb_pad -#undef skb_pad -#endif -#define skb_pad(x,y) _kc_skb_pad(x, y) -int _kc_skb_pad(struct sk_buff *skb, int pad); -#ifdef skb_padto -#undef skb_padto -#endif -#define skb_padto(x,y) _kc_skb_padto(x, y) -static inline int _kc_skb_padto(struct sk_buff *skb, unsigned int len) -{ - unsigned int size = skb->len; - if(likely(size >= len)) - return 0; - return _kc_skb_pad(skb, len - size); -} - -#ifndef DECLARE_PCI_UNMAP_ADDR -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - u32 LEN_NAME -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) -#endif /* DECLARE_PCI_UNMAP_ADDR */ -#endif /* < 2.6.18 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ) - -#ifndef DIV_ROUND_UP -#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) -#endif -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ) -#if (!((RHEL_RELEASE_CODE && \ - ((RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,4) && \ - RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)) || \ - (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,0)))) || \ - (AX_RELEASE_CODE && AX_RELEASE_CODE > AX_RELEASE_VERSION(3,0)))) -typedef irqreturn_t (*irq_handler_t)(int, void*, struct pt_regs *); -#endif -#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) -#undef CONFIG_INET_LRO -#undef CONFIG_INET_LRO_MODULE -#undef CONFIG_FCOE -#undef CONFIG_FCOE_MODULE -#endif -typedef irqreturn_t (*new_handler_t)(int, void*); -static inline irqreturn_t _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) -#else /* 2.4.x */ -typedef void (*irq_handler_t)(int, void*, struct pt_regs *); -typedef void (*new_handler_t)(int, void*); -static inline int _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) -#endif /* >= 2.5.x */ -{ - irq_handler_t new_handler = (irq_handler_t) handler; - return request_irq(irq, new_handler, flags, devname, dev_id); -} - -#undef request_irq -#define request_irq(irq, handler, flags, devname, dev_id) _kc_request_irq((irq), (handler), (flags), (devname), (dev_id)) - -#define irq_handler_t new_handler_t -/* pci_restore_state and pci_save_state handles MSI/PCIE from 2.6.19 */ -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4))) -#define PCIE_CONFIG_SPACE_LEN 256 -#define PCI_CONFIG_SPACE_LEN 64 -#define PCIE_LINK_STATUS 0x12 -#define pci_config_space_ich8lan() do {} while(0) -#undef pci_save_state -extern int _kc_pci_save_state(struct pci_dev *); -#define pci_save_state(pdev) _kc_pci_save_state(pdev) -#undef pci_restore_state -extern void _kc_pci_restore_state(struct pci_dev *); -#define pci_restore_state(pdev) _kc_pci_restore_state(pdev) -#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */ - -#ifdef HAVE_PCI_ERS -#undef free_netdev -extern void _kc_free_netdev(struct net_device *); -#define free_netdev(netdev) _kc_free_netdev(netdev) -#endif -static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) -{ - return 0; -} -#define pci_disable_pcie_error_reporting(dev) do {} while (0) -#define pci_cleanup_aer_uncorrect_error_status(dev) do {} while (0) - -extern void *_kc_kmemdup(const void *src, size_t len, unsigned gfp); -#define kmemdup(src, len, gfp) _kc_kmemdup(src, len, gfp) -#ifndef bool -#define bool _Bool -#define true 1 -#define false 0 -#endif -#else /* 2.6.19 */ -#include -#include -#endif /* < 2.6.19 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ) -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28) ) -#undef INIT_WORK -#define INIT_WORK(_work, _func) \ -do { \ - INIT_LIST_HEAD(&(_work)->entry); \ - (_work)->pending = 0; \ - (_work)->func = (void (*)(void *))_func; \ - (_work)->data = _work; \ - init_timer(&(_work)->timer); \ -} while (0) -#endif - -#ifndef PCI_VDEVICE -#define PCI_VDEVICE(ven, dev) \ - PCI_VENDOR_ID_##ven, (dev), \ - PCI_ANY_ID, PCI_ANY_ID, 0, 0 -#endif - -#ifndef round_jiffies -#define round_jiffies(x) x -#endif - -#define csum_offset csum - -#define HAVE_EARLY_VMALLOC_NODE -#define dev_to_node(dev) -1 -#undef set_dev_node -/* remove compiler warning with b=b, for unused variable */ -#define set_dev_node(a, b) do { (b) = (b); } while(0) - -#if (!(RHEL_RELEASE_CODE && \ - (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,6)))) && \ - !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) -typedef __u16 __bitwise __sum16; -typedef __u32 __bitwise __wsum; -#endif - -#if (!(RHEL_RELEASE_CODE && \ - (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))) && \ - !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) -static inline __wsum csum_unfold(__sum16 n) -{ - return (__force __wsum)n; -} -#endif - -#else /* < 2.6.20 */ -#define HAVE_DEVICE_NUMA_NODE -#endif /* < 2.6.20 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) -#define to_net_dev(class) container_of(class, struct net_device, class_dev) -#define NETDEV_CLASS_DEV -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) -#define vlan_group_get_device(vg, id) (vg->vlan_devices[id]) -#define vlan_group_set_device(vg, id, dev) \ - do { \ - if (vg) vg->vlan_devices[id] = dev; \ - } while (0) -#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ -#define pci_channel_offline(pdev) (pdev->error_state && \ - pdev->error_state != pci_channel_io_normal) -#define pci_request_selected_regions(pdev, bars, name) \ - pci_request_regions(pdev, name) -#define pci_release_selected_regions(pdev, bars) pci_release_regions(pdev); -#endif /* < 2.6.21 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) -#define tcp_hdr(skb) (skb->h.th) -#define tcp_hdrlen(skb) (skb->h.th->doff << 2) -#define skb_transport_offset(skb) (skb->h.raw - skb->data) -#define skb_transport_header(skb) (skb->h.raw) -#define ipv6_hdr(skb) (skb->nh.ipv6h) -#define ip_hdr(skb) (skb->nh.iph) -#define skb_network_offset(skb) (skb->nh.raw - skb->data) -#define skb_network_header(skb) (skb->nh.raw) -#define skb_tail_pointer(skb) skb->tail -#define skb_reset_tail_pointer(skb) \ - do { \ - skb->tail = skb->data; \ - } while (0) -#define skb_copy_to_linear_data(skb, from, len) \ - memcpy(skb->data, from, len) -#define skb_copy_to_linear_data_offset(skb, offset, from, len) \ - memcpy(skb->data + offset, from, len) -#define skb_network_header_len(skb) (skb->h.raw - skb->nh.raw) -#define pci_register_driver pci_module_init -#define skb_mac_header(skb) skb->mac.raw - -#ifdef NETIF_F_MULTI_QUEUE -#ifndef alloc_etherdev_mq -#define alloc_etherdev_mq(_a, _b) alloc_etherdev(_a) -#endif -#endif /* NETIF_F_MULTI_QUEUE */ - -#ifndef ETH_FCS_LEN -#define ETH_FCS_LEN 4 -#endif -#define cancel_work_sync(x) flush_scheduled_work() -#ifndef udp_hdr -#define udp_hdr _udp_hdr -static inline struct udphdr *_udp_hdr(const struct sk_buff *skb) -{ - return (struct udphdr *)skb_transport_header(skb); -} -#endif - -#ifdef cpu_to_be16 -#undef cpu_to_be16 -#endif -#define cpu_to_be16(x) __constant_htons(x) - -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1))) -enum { - DUMP_PREFIX_NONE, - DUMP_PREFIX_ADDRESS, - DUMP_PREFIX_OFFSET -}; -#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1)) */ -#ifndef hex_asc -#define hex_asc(x) "0123456789abcdef"[x] -#endif -#include -extern void _kc_print_hex_dump(const char *level, const char *prefix_str, - int prefix_type, int rowsize, int groupsize, - const void *buf, size_t len, bool ascii); -#define print_hex_dump(lvl, s, t, r, g, b, l, a) \ - _kc_print_hex_dump(lvl, s, t, r, g, b, l, a) -#else /* 2.6.22 */ -#define ETH_TYPE_TRANS_SETS_DEV -#define HAVE_NETDEV_STATS_IN_NETDEV -#endif /* < 2.6.22 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22) ) -#endif /* > 2.6.22 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ) -#define netif_subqueue_stopped(_a, _b) 0 -#ifndef PTR_ALIGN -#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) -#endif - -#ifndef CONFIG_PM_SLEEP -#define CONFIG_PM_SLEEP CONFIG_PM -#endif - -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13) ) -#define HAVE_ETHTOOL_GET_PERM_ADDR -#endif /* 2.6.14 through 2.6.22 */ -#endif /* < 2.6.23 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) -#ifndef ETH_FLAG_LRO -#define ETH_FLAG_LRO NETIF_F_LRO -#endif - -/* if GRO is supported then the napi struct must already exist */ -#ifndef NETIF_F_GRO -/* NAPI API changes in 2.6.24 break everything */ -struct napi_struct { - /* used to look up the real NAPI polling routine */ - int (*poll)(struct napi_struct *, int); - struct net_device *dev; - int weight; -}; -#endif - -#ifdef NAPI -extern int __kc_adapter_clean(struct net_device *, int *); -extern struct net_device *napi_to_poll_dev(struct napi_struct *napi); -#define netif_napi_add(_netdev, _napi, _poll, _weight) \ - do { \ - struct napi_struct *__napi = (_napi); \ - struct net_device *poll_dev = napi_to_poll_dev(__napi); \ - poll_dev->poll = &(__kc_adapter_clean); \ - poll_dev->priv = (_napi); \ - poll_dev->weight = (_weight); \ - set_bit(__LINK_STATE_RX_SCHED, &poll_dev->state); \ - set_bit(__LINK_STATE_START, &poll_dev->state);\ - dev_hold(poll_dev); \ - __napi->poll = &(_poll); \ - __napi->weight = (_weight); \ - __napi->dev = (_netdev); \ - } while (0) -#define netif_napi_del(_napi) \ - do { \ - struct net_device *poll_dev = napi_to_poll_dev(_napi); \ - WARN_ON(!test_bit(__LINK_STATE_RX_SCHED, &poll_dev->state)); \ - dev_put(poll_dev); \ - memset(poll_dev, 0, sizeof(struct net_device));\ - } while (0) -#define napi_schedule_prep(_napi) \ - (netif_running((_napi)->dev) && netif_rx_schedule_prep(napi_to_poll_dev(_napi))) -#define napi_schedule(_napi) \ - do { \ - if (napi_schedule_prep(_napi)) \ - __netif_rx_schedule(napi_to_poll_dev(_napi)); \ - } while (0) -#define napi_enable(_napi) netif_poll_enable(napi_to_poll_dev(_napi)) -#define napi_disable(_napi) netif_poll_disable(napi_to_poll_dev(_napi)) -#define __napi_schedule(_napi) __netif_rx_schedule(napi_to_poll_dev(_napi)) -#ifndef NETIF_F_GRO -#define napi_complete(_napi) netif_rx_complete(napi_to_poll_dev(_napi)) -#else -#define napi_complete(_napi) \ - do { \ - napi_gro_flush(_napi); \ - netif_rx_complete(napi_to_poll_dev(_napi)); \ - } while (0) -#endif /* NETIF_F_GRO */ -#else /* NAPI */ -#define netif_napi_add(_netdev, _napi, _poll, _weight) \ - do { \ - struct napi_struct *__napi = _napi; \ - _netdev->poll = &(_poll); \ - _netdev->weight = (_weight); \ - __napi->poll = &(_poll); \ - __napi->weight = (_weight); \ - __napi->dev = (_netdev); \ - } while (0) -#define netif_napi_del(_a) do {} while (0) -#endif /* NAPI */ - -#undef dev_get_by_name -#define dev_get_by_name(_a, _b) dev_get_by_name(_b) -#define __netif_subqueue_stopped(_a, _b) netif_subqueue_stopped(_a, _b) -#ifndef DMA_BIT_MASK -#define DMA_BIT_MASK(n) (((n) == 64) ? DMA_64BIT_MASK : ((1ULL<<(n))-1)) -#endif - -#ifdef NETIF_F_TSO6 -#define skb_is_gso_v6 _kc_skb_is_gso_v6 -static inline int _kc_skb_is_gso_v6(const struct sk_buff *skb) -{ - return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6; -} -#endif /* NETIF_F_TSO6 */ - -#ifndef KERN_CONT -#define KERN_CONT "" -#endif -#else /* < 2.6.24 */ -#define HAVE_ETHTOOL_GET_SSET_COUNT -#define HAVE_NETDEV_NAPI_LIST -#endif /* < 2.6.24 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,24) ) -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) -#include -#else /* >= 3.2.0 */ -#include -#endif /* else >= 3.2.0 */ -#endif /* > 2.6.24 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) ) -#define PM_QOS_CPU_DMA_LATENCY 1 - -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18) ) -#include -#define PM_QOS_DEFAULT_VALUE INFINITE_LATENCY -#define pm_qos_add_requirement(pm_qos_class, name, value) \ - set_acceptable_latency(name, value) -#define pm_qos_remove_requirement(pm_qos_class, name) \ - remove_acceptable_latency(name) -#define pm_qos_update_requirement(pm_qos_class, name, value) \ - modify_acceptable_latency(name, value) -#else -#define PM_QOS_DEFAULT_VALUE -1 -#define pm_qos_add_requirement(pm_qos_class, name, value) -#define pm_qos_remove_requirement(pm_qos_class, name) -#define pm_qos_update_requirement(pm_qos_class, name, value) { \ - if (value != PM_QOS_DEFAULT_VALUE) { \ - printk(KERN_WARNING "%s: unable to set PM QoS requirement\n", \ - pci_name(adapter->pdev)); \ - } \ -} - -#endif /* > 2.6.18 */ - -#define pci_enable_device_mem(pdev) pci_enable_device(pdev) - -#ifndef DEFINE_PCI_DEVICE_TABLE -#define DEFINE_PCI_DEVICE_TABLE(_table) struct pci_device_id _table[] -#endif /* DEFINE_PCI_DEVICE_TABLE */ - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) -#ifndef IXGBE_PROCFS -#define IXGBE_PROCFS -#endif /* IXGBE_PROCFS */ -#endif /* >= 2.6.0 */ - - -#else /* < 2.6.25 */ - -#ifndef IXGBE_SYSFS -#define IXGBE_SYSFS -#endif /* IXGBE_SYSFS */ - - -#endif /* < 2.6.25 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ) -#ifndef clamp_t -#define clamp_t(type, val, min, max) ({ \ - type __val = (val); \ - type __min = (min); \ - type __max = (max); \ - __val = __val < __min ? __min : __val; \ - __val > __max ? __max : __val; }) -#endif /* clamp_t */ -#ifdef NETIF_F_TSO -#ifdef NETIF_F_TSO6 -#define netif_set_gso_max_size(_netdev, size) \ - do { \ - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { \ - _netdev->features &= ~NETIF_F_TSO; \ - _netdev->features &= ~NETIF_F_TSO6; \ - } else { \ - _netdev->features |= NETIF_F_TSO; \ - _netdev->features |= NETIF_F_TSO6; \ - } \ - } while (0) -#else /* NETIF_F_TSO6 */ -#define netif_set_gso_max_size(_netdev, size) \ - do { \ - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) \ - _netdev->features &= ~NETIF_F_TSO; \ - else \ - _netdev->features |= NETIF_F_TSO; \ - } while (0) -#endif /* NETIF_F_TSO6 */ -#else -#define netif_set_gso_max_size(_netdev, size) do {} while (0) -#endif /* NETIF_F_TSO */ -#undef kzalloc_node -#define kzalloc_node(_size, _flags, _node) kzalloc(_size, _flags) - -extern void _kc_pci_disable_link_state(struct pci_dev *dev, int state); -#define pci_disable_link_state(p, s) _kc_pci_disable_link_state(p, s) -#else /* < 2.6.26 */ -#include -#define HAVE_NETDEV_VLAN_FEATURES -#endif /* < 2.6.26 */ -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) ) -static inline void _kc_ethtool_cmd_speed_set(struct ethtool_cmd *ep, - __u32 speed) -{ - ep->speed = (__u16)speed; - /* ep->speed_hi = (__u16)(speed >> 16); */ -} -#define ethtool_cmd_speed_set _kc_ethtool_cmd_speed_set - -static inline __u32 _kc_ethtool_cmd_speed(struct ethtool_cmd *ep) -{ - /* no speed_hi before 2.6.27, and probably no need for it yet */ - return (__u32)ep->speed; -} -#define ethtool_cmd_speed _kc_ethtool_cmd_speed - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) ) -#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) && defined(CONFIG_PM)) -#define ANCIENT_PM 1 -#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) && \ - (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) && \ - defined(CONFIG_PM_SLEEP)) -#define NEWER_PM 1 -#endif -#if defined(ANCIENT_PM) || defined(NEWER_PM) -#undef device_set_wakeup_enable -#define device_set_wakeup_enable(dev, val) \ - do { \ - u16 pmc = 0; \ - int pm = pci_find_capability(adapter->pdev, PCI_CAP_ID_PM); \ - if (pm) { \ - pci_read_config_word(adapter->pdev, pm + PCI_PM_PMC, \ - &pmc); \ - } \ - (dev)->power.can_wakeup = !!(pmc >> 11); \ - (dev)->power.should_wakeup = (val && (pmc >> 11)); \ - } while (0) -#endif /* 2.6.15-2.6.22 and CONFIG_PM or 2.6.23-2.6.25 and CONFIG_PM_SLEEP */ -#endif /* 2.6.15 through 2.6.27 */ -#ifndef netif_napi_del -#define netif_napi_del(_a) do {} while (0) -#ifdef NAPI -#ifdef CONFIG_NETPOLL -#undef netif_napi_del -#define netif_napi_del(_a) list_del(&(_a)->dev_list); -#endif -#endif -#endif /* netif_napi_del */ -#ifdef dma_mapping_error -#undef dma_mapping_error -#endif -#define dma_mapping_error(dev, dma_addr) pci_dma_mapping_error(dma_addr) - -#ifdef CONFIG_NETDEVICES_MULTIQUEUE -#define HAVE_TX_MQ -#endif - -#ifdef HAVE_TX_MQ -extern void _kc_netif_tx_stop_all_queues(struct net_device *); -extern void _kc_netif_tx_wake_all_queues(struct net_device *); -extern void _kc_netif_tx_start_all_queues(struct net_device *); -#define netif_tx_stop_all_queues(a) _kc_netif_tx_stop_all_queues(a) -#define netif_tx_wake_all_queues(a) _kc_netif_tx_wake_all_queues(a) -#define netif_tx_start_all_queues(a) _kc_netif_tx_start_all_queues(a) -#undef netif_stop_subqueue -#define netif_stop_subqueue(_ndev,_qi) do { \ - if (netif_is_multiqueue((_ndev))) \ - netif_stop_subqueue((_ndev), (_qi)); \ - else \ - netif_stop_queue((_ndev)); \ - } while (0) -#undef netif_start_subqueue -#define netif_start_subqueue(_ndev,_qi) do { \ - if (netif_is_multiqueue((_ndev))) \ - netif_start_subqueue((_ndev), (_qi)); \ - else \ - netif_start_queue((_ndev)); \ - } while (0) -#else /* HAVE_TX_MQ */ -#define netif_tx_stop_all_queues(a) netif_stop_queue(a) -#define netif_tx_wake_all_queues(a) netif_wake_queue(a) -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) ) -#define netif_tx_start_all_queues(a) netif_start_queue(a) -#else -#define netif_tx_start_all_queues(a) do {} while (0) -#endif -#define netif_stop_subqueue(_ndev,_qi) netif_stop_queue((_ndev)) -#define netif_start_subqueue(_ndev,_qi) netif_start_queue((_ndev)) -#endif /* HAVE_TX_MQ */ -#ifndef NETIF_F_MULTI_QUEUE -#define NETIF_F_MULTI_QUEUE 0 -#define netif_is_multiqueue(a) 0 -#define netif_wake_subqueue(a, b) -#endif /* NETIF_F_MULTI_QUEUE */ - -#ifndef __WARN_printf -extern void __kc_warn_slowpath(const char *file, const int line, - const char *fmt, ...) __attribute__((format(printf, 3, 4))); -#define __WARN_printf(arg...) __kc_warn_slowpath(__FILE__, __LINE__, arg) -#endif /* __WARN_printf */ - -#ifndef WARN -#define WARN(condition, format...) ({ \ - int __ret_warn_on = !!(condition); \ - if (unlikely(__ret_warn_on)) \ - __WARN_printf(format); \ - unlikely(__ret_warn_on); \ -}) -#endif /* WARN */ -#else /* < 2.6.27 */ -#define HAVE_TX_MQ -#define HAVE_NETDEV_SELECT_QUEUE -#endif /* < 2.6.27 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) -#define pci_ioremap_bar(pdev, bar) ioremap(pci_resource_start(pdev, bar), \ - pci_resource_len(pdev, bar)) -#define pci_wake_from_d3 _kc_pci_wake_from_d3 -#define pci_prepare_to_sleep _kc_pci_prepare_to_sleep -extern int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable); -extern int _kc_pci_prepare_to_sleep(struct pci_dev *dev); -#define netdev_alloc_page(a) alloc_page(GFP_ATOMIC) -#ifndef __skb_queue_head_init -static inline void __kc_skb_queue_head_init(struct sk_buff_head *list) -{ - list->prev = list->next = (struct sk_buff *)list; - list->qlen = 0; -} -#define __skb_queue_head_init(_q) __kc_skb_queue_head_init(_q) -#endif -#endif /* < 2.6.28 */ - -#ifndef skb_add_rx_frag -#define skb_add_rx_frag _kc_skb_add_rx_frag -extern void _kc_skb_add_rx_frag(struct sk_buff *, int, struct page *, int, int); -#endif - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) ) -#ifndef swap -#define swap(a, b) \ - do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) -#endif -#define pci_request_selected_regions_exclusive(pdev, bars, name) \ - pci_request_selected_regions(pdev, bars, name) -#ifndef CONFIG_NR_CPUS -#define CONFIG_NR_CPUS 1 -#endif /* CONFIG_NR_CPUS */ -#ifndef pcie_aspm_enabled -#define pcie_aspm_enabled() (1) -#endif /* pcie_aspm_enabled */ -#else /* < 2.6.29 */ -#ifndef HAVE_NET_DEVICE_OPS -#define HAVE_NET_DEVICE_OPS -#endif -#ifdef CONFIG_DCB -#define HAVE_PFC_MODE_ENABLE -#endif /* CONFIG_DCB */ -#endif /* < 2.6.29 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ) -#define skb_rx_queue_recorded(a) false -#define skb_get_rx_queue(a) 0 -#undef CONFIG_FCOE -#undef CONFIG_FCOE_MODULE -extern u16 _kc_skb_tx_hash(struct net_device *dev, struct sk_buff *skb); -#define skb_tx_hash(n, s) _kc_skb_tx_hash(n, s) -#define skb_record_rx_queue(a, b) do {} while (0) -#ifndef CONFIG_PCI_IOV -#undef pci_enable_sriov -#define pci_enable_sriov(a, b) -ENOTSUPP -#undef pci_disable_sriov -#define pci_disable_sriov(a) do {} while (0) -#endif /* CONFIG_PCI_IOV */ -#ifndef pr_cont -#define pr_cont(fmt, ...) \ - printk(KERN_CONT fmt, ##__VA_ARGS__) -#endif /* pr_cont */ -#else -#define HAVE_ASPM_QUIRKS -#endif /* < 2.6.30 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ) -#define ETH_P_1588 0x88F7 -#define ETH_P_FIP 0x8914 -#ifndef netdev_uc_count -#define netdev_uc_count(dev) ((dev)->uc_count) -#endif -#ifndef netdev_for_each_uc_addr -#define netdev_for_each_uc_addr(uclist, dev) \ - for (uclist = dev->uc_list; uclist; uclist = uclist->next) -#endif -#else -#ifndef HAVE_NETDEV_STORAGE_ADDRESS -#define HAVE_NETDEV_STORAGE_ADDRESS -#endif -#ifndef HAVE_NETDEV_HW_ADDR -#define HAVE_NETDEV_HW_ADDR -#endif -#ifndef HAVE_TRANS_START_IN_QUEUE -#define HAVE_TRANS_START_IN_QUEUE -#endif -#endif /* < 2.6.31 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) ) -#undef netdev_tx_t -#define netdev_tx_t int -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef NETIF_F_FCOE_MTU -#define NETIF_F_FCOE_MTU (1 << 26) -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ - -#ifndef pm_runtime_get_sync -#define pm_runtime_get_sync(dev) do {} while (0) -#endif -#ifndef pm_runtime_put -#define pm_runtime_put(dev) do {} while (0) -#endif -#ifndef pm_runtime_put_sync -#define pm_runtime_put_sync(dev) do {} while (0) -#endif -#ifndef pm_runtime_resume -#define pm_runtime_resume(dev) do {} while (0) -#endif -#ifndef pm_schedule_suspend -#define pm_schedule_suspend(dev, t) do {} while (0) -#endif -#ifndef pm_runtime_set_suspended -#define pm_runtime_set_suspended(dev) do {} while (0) -#endif -#ifndef pm_runtime_disable -#define pm_runtime_disable(dev) do {} while (0) -#endif -#ifndef pm_runtime_put_noidle -#define pm_runtime_put_noidle(dev) do {} while (0) -#endif -#ifndef pm_runtime_set_active -#define pm_runtime_set_active(dev) do {} while (0) -#endif -#ifndef pm_runtime_enable -#define pm_runtime_enable(dev) do {} while (0) -#endif -#ifndef pm_runtime_get_noresume -#define pm_runtime_get_noresume(dev) do {} while (0) -#endif -#else /* < 2.6.32 */ -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE -#define HAVE_NETDEV_OPS_FCOE_ENABLE -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#ifdef CONFIG_DCB -#ifndef HAVE_DCBNL_OPS_GETAPP -#define HAVE_DCBNL_OPS_GETAPP -#endif -#endif /* CONFIG_DCB */ -#include -/* IOV bad DMA target work arounds require at least this kernel rev support */ -#define HAVE_PCIE_TYPE -#endif /* < 2.6.32 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) ) -#ifndef pci_pcie_cap -#define pci_pcie_cap(pdev) pci_find_capability(pdev, PCI_CAP_ID_EXP) -#endif -#ifndef IPV4_FLOW -#define IPV4_FLOW 0x10 -#endif /* IPV4_FLOW */ -#ifndef IPV6_FLOW -#define IPV6_FLOW 0x11 -#endif /* IPV6_FLOW */ -/* Features back-ported to RHEL6 or SLES11 SP1 after 2.6.32 */ -#if ( (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) || \ - (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,1,0)) ) -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN -#define HAVE_NETDEV_OPS_FCOE_GETWWN -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#endif /* RHEL6 or SLES11 SP1 */ -#ifndef __percpu -#define __percpu -#endif /* __percpu */ -#else /* < 2.6.33 */ -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN -#define HAVE_NETDEV_OPS_FCOE_GETWWN -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#define HAVE_ETHTOOL_SFP_DISPLAY_PORT -#endif /* < 2.6.33 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) ) -#ifndef ETH_FLAG_NTUPLE -#define ETH_FLAG_NTUPLE NETIF_F_NTUPLE -#endif - -#ifndef netdev_mc_count -#define netdev_mc_count(dev) ((dev)->mc_count) -#endif -#ifndef netdev_mc_empty -#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0) -#endif -#ifndef netdev_for_each_mc_addr -#define netdev_for_each_mc_addr(mclist, dev) \ - for (mclist = dev->mc_list; mclist; mclist = mclist->next) -#endif -#ifndef netdev_uc_count -#define netdev_uc_count(dev) ((dev)->uc.count) -#endif -#ifndef netdev_uc_empty -#define netdev_uc_empty(dev) (netdev_uc_count(dev) == 0) -#endif -#ifndef netdev_for_each_uc_addr -#define netdev_for_each_uc_addr(ha, dev) \ - list_for_each_entry(ha, &dev->uc.list, list) -#endif -#ifndef dma_set_coherent_mask -#define dma_set_coherent_mask(dev,mask) \ - pci_set_consistent_dma_mask(to_pci_dev(dev),(mask)) -#endif -#ifndef pci_dev_run_wake -#define pci_dev_run_wake(pdev) (0) -#endif - -/* netdev logging taken from include/linux/netdevice.h */ -#ifndef netdev_name -static inline const char *_kc_netdev_name(const struct net_device *dev) -{ - if (dev->reg_state != NETREG_REGISTERED) - return "(unregistered net_device)"; - return dev->name; -} -#define netdev_name(netdev) _kc_netdev_name(netdev) -#endif /* netdev_name */ - -#undef netdev_printk -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) -#define netdev_printk(level, netdev, format, args...) \ -do { \ - struct adapter_struct *kc_adapter = netdev_priv(netdev);\ - struct pci_dev *pdev = kc_adapter->pdev; \ - printk("%s %s: " format, level, pci_name(pdev), \ - ##args); \ -} while(0) -#elif ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) -#define netdev_printk(level, netdev, format, args...) \ -do { \ - struct adapter_struct *kc_adapter = netdev_priv(netdev);\ - struct pci_dev *pdev = kc_adapter->pdev; \ - struct device *dev = pci_dev_to_dev(pdev); \ - dev_printk(level, dev, "%s: " format, \ - netdev_name(netdev), ##args); \ -} while(0) -#else /* 2.6.21 => 2.6.34 */ -#define netdev_printk(level, netdev, format, args...) \ - dev_printk(level, (netdev)->dev.parent, \ - "%s: " format, \ - netdev_name(netdev), ##args) -#endif /* <2.6.0 <2.6.21 <2.6.34 */ -#undef netdev_emerg -#define netdev_emerg(dev, format, args...) \ - netdev_printk(KERN_EMERG, dev, format, ##args) -#undef netdev_alert -#define netdev_alert(dev, format, args...) \ - netdev_printk(KERN_ALERT, dev, format, ##args) -#undef netdev_crit -#define netdev_crit(dev, format, args...) \ - netdev_printk(KERN_CRIT, dev, format, ##args) -#undef netdev_err -#define netdev_err(dev, format, args...) \ - netdev_printk(KERN_ERR, dev, format, ##args) -#undef netdev_warn -#define netdev_warn(dev, format, args...) \ - netdev_printk(KERN_WARNING, dev, format, ##args) -#undef netdev_notice -#define netdev_notice(dev, format, args...) \ - netdev_printk(KERN_NOTICE, dev, format, ##args) -#undef netdev_info -#define netdev_info(dev, format, args...) \ - netdev_printk(KERN_INFO, dev, format, ##args) -#undef netdev_dbg -#if defined(DEBUG) -#define netdev_dbg(__dev, format, args...) \ - netdev_printk(KERN_DEBUG, __dev, format, ##args) -#elif defined(CONFIG_DYNAMIC_DEBUG) -#define netdev_dbg(__dev, format, args...) \ -do { \ - dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \ - netdev_name(__dev), ##args); \ -} while (0) -#else /* DEBUG */ -#define netdev_dbg(__dev, format, args...) \ -({ \ - if (0) \ - netdev_printk(KERN_DEBUG, __dev, format, ##args); \ - 0; \ -}) -#endif /* DEBUG */ - -#undef netif_printk -#define netif_printk(priv, type, level, dev, fmt, args...) \ -do { \ - if (netif_msg_##type(priv)) \ - netdev_printk(level, (dev), fmt, ##args); \ -} while (0) - -#undef netif_emerg -#define netif_emerg(priv, type, dev, fmt, args...) \ - netif_level(emerg, priv, type, dev, fmt, ##args) -#undef netif_alert -#define netif_alert(priv, type, dev, fmt, args...) \ - netif_level(alert, priv, type, dev, fmt, ##args) -#undef netif_crit -#define netif_crit(priv, type, dev, fmt, args...) \ - netif_level(crit, priv, type, dev, fmt, ##args) -#undef netif_err -#define netif_err(priv, type, dev, fmt, args...) \ - netif_level(err, priv, type, dev, fmt, ##args) -#undef netif_warn -#define netif_warn(priv, type, dev, fmt, args...) \ - netif_level(warn, priv, type, dev, fmt, ##args) -#undef netif_notice -#define netif_notice(priv, type, dev, fmt, args...) \ - netif_level(notice, priv, type, dev, fmt, ##args) -#undef netif_info -#define netif_info(priv, type, dev, fmt, args...) \ - netif_level(info, priv, type, dev, fmt, ##args) - -#ifdef SET_SYSTEM_SLEEP_PM_OPS -#define HAVE_SYSTEM_SLEEP_PM_OPS -#endif - -#ifndef for_each_set_bit -#define for_each_set_bit(bit, addr, size) \ - for ((bit) = find_first_bit((addr), (size)); \ - (bit) < (size); \ - (bit) = find_next_bit((addr), (size), (bit) + 1)) -#endif /* for_each_set_bit */ - -#ifndef DEFINE_DMA_UNMAP_ADDR -#define DEFINE_DMA_UNMAP_ADDR DECLARE_PCI_UNMAP_ADDR -#define DEFINE_DMA_UNMAP_LEN DECLARE_PCI_UNMAP_LEN -#define dma_unmap_addr pci_unmap_addr -#define dma_unmap_addr_set pci_unmap_addr_set -#define dma_unmap_len pci_unmap_len -#define dma_unmap_len_set pci_unmap_len_set -#endif /* DEFINE_DMA_UNMAP_ADDR */ -#else /* < 2.6.34 */ -#define HAVE_SYSTEM_SLEEP_PM_OPS -#ifndef HAVE_SET_RX_MODE -#define HAVE_SET_RX_MODE -#endif - -#endif /* < 2.6.34 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ) -#ifndef numa_node_id -#define numa_node_id() 0 -#endif -#ifdef HAVE_TX_MQ -#include -#ifndef CONFIG_NETDEVICES_MULTIQUEUE -void _kc_netif_set_real_num_tx_queues(struct net_device *, unsigned int); -#define netif_set_real_num_tx_queues _kc_netif_set_real_num_tx_queues -#else /* CONFIG_NETDEVICES_MULTI_QUEUE */ -#define netif_set_real_num_tx_queues(_netdev, _count) \ - do { \ - (_netdev)->egress_subqueue_count = _count; \ - } while (0) -#endif /* CONFIG_NETDEVICES_MULTI_QUEUE */ -#else -#define netif_set_real_num_tx_queues(_netdev, _count) do {} while(0) -#endif /* HAVE_TX_MQ */ -#ifndef ETH_FLAG_RXHASH -#define ETH_FLAG_RXHASH (1<<28) -#endif /* ETH_FLAG_RXHASH */ -#else /* < 2.6.35 */ -#define HAVE_PM_QOS_REQUEST_LIST -#define HAVE_IRQ_AFFINITY_HINT -#endif /* < 2.6.35 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ) -extern int _kc_ethtool_op_set_flags(struct net_device *, u32, u32); -#define ethtool_op_set_flags _kc_ethtool_op_set_flags -extern u32 _kc_ethtool_op_get_flags(struct net_device *); -#define ethtool_op_get_flags _kc_ethtool_op_get_flags - -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#ifdef NET_IP_ALIGN -#undef NET_IP_ALIGN -#endif -#define NET_IP_ALIGN 0 -#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ - -#ifdef NET_SKB_PAD -#undef NET_SKB_PAD -#endif - -#if (L1_CACHE_BYTES > 32) -#define NET_SKB_PAD L1_CACHE_BYTES -#else -#define NET_SKB_PAD 32 -#endif - -static inline struct sk_buff *_kc_netdev_alloc_skb_ip_align(struct net_device *dev, - unsigned int length) -{ - struct sk_buff *skb; - - skb = alloc_skb(length + NET_SKB_PAD + NET_IP_ALIGN, GFP_ATOMIC); - if (skb) { -#if (NET_IP_ALIGN + NET_SKB_PAD) - skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD); -#endif - skb->dev = dev; - } - return skb; -} - -#ifdef netdev_alloc_skb_ip_align -#undef netdev_alloc_skb_ip_align -#endif -#define netdev_alloc_skb_ip_align(n, l) _kc_netdev_alloc_skb_ip_align(n, l) - -#undef netif_level -#define netif_level(level, priv, type, dev, fmt, args...) \ -do { \ - if (netif_msg_##type(priv)) \ - netdev_##level(dev, fmt, ##args); \ -} while (0) - -#undef usleep_range -#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000)) - -#else /* < 2.6.36 */ -#define HAVE_PM_QOS_REQUEST_ACTIVE -#define HAVE_8021P_SUPPORT -#define HAVE_NDO_GET_STATS64 -#endif /* < 2.6.36 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ) -#ifndef ETHTOOL_RXNTUPLE_ACTION_CLEAR -#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) -#endif -#ifndef VLAN_N_VID -#define VLAN_N_VID VLAN_GROUP_ARRAY_LEN -#endif /* VLAN_N_VID */ -#ifndef ETH_FLAG_TXVLAN -#define ETH_FLAG_TXVLAN (1 << 7) -#endif /* ETH_FLAG_TXVLAN */ -#ifndef ETH_FLAG_RXVLAN -#define ETH_FLAG_RXVLAN (1 << 8) -#endif /* ETH_FLAG_RXVLAN */ - -static inline void _kc_skb_checksum_none_assert(struct sk_buff *skb) -{ - WARN_ON(skb->ip_summed != CHECKSUM_NONE); -} -#define skb_checksum_none_assert(skb) _kc_skb_checksum_none_assert(skb) - -static inline void *_kc_vzalloc_node(unsigned long size, int node) -{ - void *addr = vmalloc_node(size, node); - if (addr) - memset(addr, 0, size); - return addr; -} -#define vzalloc_node(_size, _node) _kc_vzalloc_node(_size, _node) - -static inline void *_kc_vzalloc(unsigned long size) -{ - void *addr = vmalloc(size); - if (addr) - memset(addr, 0, size); - return addr; -} -#define vzalloc(_size) _kc_vzalloc(_size) - -#ifndef vlan_get_protocol -static inline __be16 __kc_vlan_get_protocol(const struct sk_buff *skb) -{ - if (vlan_tx_tag_present(skb) || - skb->protocol != cpu_to_be16(ETH_P_8021Q)) - return skb->protocol; - - if (skb_headlen(skb) < sizeof(struct vlan_ethhdr)) - return 0; - - return ((struct vlan_ethhdr*)skb->data)->h_vlan_encapsulated_proto; -} -#define vlan_get_protocol(_skb) __kc_vlan_get_protocol(_skb) -#endif -#ifdef HAVE_HW_TIME_STAMP -#define SKBTX_HW_TSTAMP (1 << 0) -#define SKBTX_IN_PROGRESS (1 << 2) -#define SKB_SHARED_TX_IS_UNION -#endif -#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,18) ) -#ifndef HAVE_VLAN_RX_REGISTER -#define HAVE_VLAN_RX_REGISTER -#endif -#endif /* > 2.4.18 */ -#endif /* < 2.6.37 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) ) -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) -#define skb_checksum_start_offset(skb) skb_transport_offset(skb) -#else /* 2.6.22 -> 2.6.37 */ -static inline int _kc_skb_checksum_start_offset(const struct sk_buff *skb) -{ - return skb->csum_start - skb_headroom(skb); -} -#define skb_checksum_start_offset(skb) _kc_skb_checksum_start_offset(skb) -#endif /* 2.6.22 -> 2.6.37 */ -#ifdef CONFIG_DCB -#ifndef IEEE_8021QAZ_MAX_TCS -#define IEEE_8021QAZ_MAX_TCS 8 -#endif -#ifndef DCB_CAP_DCBX_HOST -#define DCB_CAP_DCBX_HOST 0x01 -#endif -#ifndef DCB_CAP_DCBX_LLD_MANAGED -#define DCB_CAP_DCBX_LLD_MANAGED 0x02 -#endif -#ifndef DCB_CAP_DCBX_VER_CEE -#define DCB_CAP_DCBX_VER_CEE 0x04 -#endif -#ifndef DCB_CAP_DCBX_VER_IEEE -#define DCB_CAP_DCBX_VER_IEEE 0x08 -#endif -#ifndef DCB_CAP_DCBX_STATIC -#define DCB_CAP_DCBX_STATIC 0x10 -#endif -#endif /* CONFIG_DCB */ -#else /* < 2.6.38 */ -#endif /* < 2.6.38 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) ) -#ifndef skb_queue_reverse_walk_safe -#define skb_queue_reverse_walk_safe(queue, skb, tmp) \ - for (skb = (queue)->prev, tmp = skb->prev; \ - skb != (struct sk_buff *)(queue); \ - skb = tmp, tmp = skb->prev) -#endif -#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0))) -extern u8 _kc_netdev_get_num_tc(struct net_device *dev); -#define netdev_get_num_tc(dev) _kc_netdev_get_num_tc(dev) -extern u8 _kc_netdev_get_prio_tc_map(struct net_device *dev, u8 up); -#define netdev_get_prio_tc_map(dev, up) _kc_netdev_get_prio_tc_map(dev, up) -#define netdev_set_prio_tc_map(dev, up, tc) do {} while (0) -#else /* RHEL6.1 or greater */ -#ifndef HAVE_MQPRIO -#define HAVE_MQPRIO -#endif /* HAVE_MQPRIO */ -#ifdef CONFIG_DCB -#ifndef HAVE_DCBNL_IEEE -#define HAVE_DCBNL_IEEE -#ifndef IEEE_8021QAZ_TSA_STRICT -#define IEEE_8021QAZ_TSA_STRICT 0 -#endif -#ifndef IEEE_8021QAZ_TSA_ETS -#define IEEE_8021QAZ_TSA_ETS 2 -#endif -#ifndef IEEE_8021QAZ_APP_SEL_ETHERTYPE -#define IEEE_8021QAZ_APP_SEL_ETHERTYPE 1 -#endif -#endif -#endif /* CONFIG_DCB */ -#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0)) */ -#else /* < 2.6.39 */ -#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) -#ifndef HAVE_NETDEV_OPS_FCOE_DDP_TARGET -#define HAVE_NETDEV_OPS_FCOE_DDP_TARGET -#endif -#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ -#ifndef HAVE_MQPRIO -#define HAVE_MQPRIO -#endif -#ifndef HAVE_SETUP_TC -#define HAVE_SETUP_TC -#endif -#ifdef CONFIG_DCB -#ifndef HAVE_DCBNL_IEEE -#define HAVE_DCBNL_IEEE -#endif -#endif /* CONFIG_DCB */ -#ifndef HAVE_NDO_SET_FEATURES -#define HAVE_NDO_SET_FEATURES -#endif -#endif /* < 2.6.39 */ - -/*****************************************************************************/ -/* use < 2.6.40 because of a Fedora 15 kernel update where they - * updated the kernel version to 2.6.40.x and they back-ported 3.0 features - * like set_phys_id for ethtool. - */ -#undef ETHTOOL_GRXRINGS -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,40) ) -#ifdef ETHTOOL_GRXRINGS -#ifndef FLOW_EXT -#define FLOW_EXT 0x80000000 -union _kc_ethtool_flow_union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - __u8 hdata[60]; -}; -struct _kc_ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; -}; -struct _kc_ethtool_rx_flow_spec { - __u32 flow_type; - union _kc_ethtool_flow_union h_u; - struct _kc_ethtool_flow_ext h_ext; - union _kc_ethtool_flow_union m_u; - struct _kc_ethtool_flow_ext m_ext; - __u64 ring_cookie; - __u32 location; -}; -#define ethtool_rx_flow_spec _kc_ethtool_rx_flow_spec -#endif /* FLOW_EXT */ -#endif - -#define pci_disable_link_state_locked pci_disable_link_state - -#ifndef PCI_LTR_VALUE_MASK -#define PCI_LTR_VALUE_MASK 0x000003ff -#endif -#ifndef PCI_LTR_SCALE_MASK -#define PCI_LTR_SCALE_MASK 0x00001c00 -#endif -#ifndef PCI_LTR_SCALE_SHIFT -#define PCI_LTR_SCALE_SHIFT 10 -#endif - -#else /* < 2.6.40 */ -#define HAVE_ETHTOOL_SET_PHYS_ID -#endif /* < 2.6.40 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) -#ifndef __netdev_alloc_skb_ip_align -#define __netdev_alloc_skb_ip_align(d,l,_g) netdev_alloc_skb_ip_align(d,l) -#endif /* __netdev_alloc_skb_ip_align */ -#define dcb_ieee_setapp(dev, app) dcb_setapp(dev, app) -#define dcb_ieee_delapp(dev, app) 0 -#define dcb_ieee_getapp_mask(dev, app) (1 << app->priority) -#else /* < 3.1.0 */ -#ifndef HAVE_DCBNL_IEEE_DELAPP -#define HAVE_DCBNL_IEEE_DELAPP -#endif -#endif /* < 3.1.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) -#ifdef ETHTOOL_GRXRINGS -#define HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS -#endif /* ETHTOOL_GRXRINGS */ - -#ifndef skb_frag_size -#define skb_frag_size(frag) _kc_skb_frag_size(frag) -static inline unsigned int _kc_skb_frag_size(const skb_frag_t *frag) -{ - return frag->size; -} -#endif /* skb_frag_size */ - -#ifndef skb_frag_size_sub -#define skb_frag_size_sub(frag, delta) _kc_skb_frag_size_sub(frag, delta) -static inline void _kc_skb_frag_size_sub(skb_frag_t *frag, int delta) -{ - frag->size -= delta; -} -#endif /* skb_frag_size_sub */ - -#ifndef skb_frag_page -#define skb_frag_page(frag) _kc_skb_frag_page(frag) -static inline struct page *_kc_skb_frag_page(const skb_frag_t *frag) -{ - return frag->page; -} -#endif /* skb_frag_page */ - -#ifndef skb_frag_address -#define skb_frag_address(frag) _kc_skb_frag_address(frag) -static inline void *_kc_skb_frag_address(const skb_frag_t *frag) -{ - return page_address(skb_frag_page(frag)) + frag->page_offset; -} -#endif /* skb_frag_address */ - -#ifndef skb_frag_dma_map -#define skb_frag_dma_map(dev,frag,offset,size,dir) \ - _kc_skb_frag_dma_map(dev,frag,offset,size,dir) -static inline dma_addr_t _kc_skb_frag_dma_map(struct device *dev, - const skb_frag_t *frag, - size_t offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_page(dev, skb_frag_page(frag), - frag->page_offset + offset, size, dir); -} -#endif /* skb_frag_dma_map */ - -#ifndef __skb_frag_unref -#define __skb_frag_unref(frag) __kc_skb_frag_unref(frag) -static inline void __kc_skb_frag_unref(skb_frag_t *frag) -{ - put_page(skb_frag_page(frag)); -} -#endif /* __skb_frag_unref */ -#else /* < 3.2.0 */ -#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED -#define HAVE_PCI_DEV_FLAGS_ASSIGNED -#define HAVE_VF_SPOOFCHK_CONFIGURE -#endif -#endif /* < 3.2.0 */ - -#if (RHEL_RELEASE_CODE && \ - (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)) && \ - (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) -#undef ixgbe_get_netdev_tc_txq -#define ixgbe_get_netdev_tc_txq(dev, tc) (&netdev_extended(dev)->qos_data.tc_to_txq[tc]) -#endif - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0) ) -typedef u32 kni_netdev_features_t; -#else /* ! < 3.3.0 */ -typedef netdev_features_t kni_netdev_features_t; -#define HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef ETHTOOL_SRXNTUPLE -#undef ETHTOOL_SRXNTUPLE -#endif -#endif /* < 3.3.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) ) -#ifndef NETIF_F_RXFCS -#define NETIF_F_RXFCS 0 -#endif /* NETIF_F_RXFCS */ -#ifndef NETIF_F_RXALL -#define NETIF_F_RXALL 0 -#endif /* NETIF_F_RXALL */ - -#define NUMTCS_RETURNS_U8 - - -#endif /* < 3.4.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) ) -static inline bool __kc_ether_addr_equal(const u8 *addr1, const u8 *addr2) -{ - return !compare_ether_addr(addr1, addr2); -} -#define ether_addr_equal(_addr1, _addr2) __kc_ether_addr_equal((_addr1),(_addr2)) -#else -#define HAVE_FDB_OPS -#endif /* < 3.5.0 */ - -/*****************************************************************************/ -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0) ) -#define NETIF_F_HW_VLAN_TX NETIF_F_HW_VLAN_CTAG_TX -#define NETIF_F_HW_VLAN_RX NETIF_F_HW_VLAN_CTAG_RX -#define NETIF_F_HW_VLAN_FILTER NETIF_F_HW_VLAN_CTAG_FILTER -#endif /* >= 3.10.0 */ - -#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) -#ifdef CONFIG_PCI_IOV -extern int __kc_pci_vfs_assigned(struct pci_dev *dev); -#else -static inline int __kc_pci_vfs_assigned(struct pci_dev *dev) -{ - return 0; -} -#endif -#define pci_vfs_assigned(dev) __kc_pci_vfs_assigned(dev) - -#endif - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,16,0) ) -#define SET_ETHTOOL_OPS(netdev, ops) ((netdev)->ethtool_ops = (ops)) -#endif /* >= 3.16.0 */ - -#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(5,0,0) ) -#define dev_open(x) dev_open(x, NULL) -#endif /* >= 5.0.0 */ - -/* - * vlan_tx_tag_* macros renamed to skb_vlan_tag_* (Linux commit: df8a39defad4) - * For older kernels backported this commit, need to use renamed functions. - * This fix is specific to RedHat/CentOS kernels. - */ -#if (defined(RHEL_RELEASE_CODE) && \ - RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 8) && \ - LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34)) -#define vlan_tx_tag_get skb_vlan_tag_get -#define vlan_tx_tag_present skb_vlan_tag_present -#endif - -#endif /* _KCOMPAT_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/meson.build b/kernel/linux/kni/ethtool/ixgbe/meson.build deleted file mode 100644 index 73248b13e4..0000000000 --- a/kernel/linux/kni/ethtool/ixgbe/meson.build +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2018 Luca Boccassi - -kni_ixgbe_sources = files( - 'ixgbe_82598.c', - 'ixgbe_82599.c', - 'ixgbe_api.c', - 'ixgbe_common.c', - 'ixgbe_ethtool.c', - 'ixgbe_main.c', - 'ixgbe_phy.c', - 'ixgbe_x540.c', - 'kcompat.c') diff --git a/kernel/linux/kni/ethtool/meson.build b/kernel/linux/kni/ethtool/meson.build deleted file mode 100644 index 7a8458ddcd..0000000000 --- a/kernel/linux/kni/ethtool/meson.build +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2018 Luca Boccassi - -subdir('igb') -subdir('ixgbe') diff --git a/kernel/linux/kni/kni_dev.h b/kernel/linux/kni/kni_dev.h index df46aa70ee..44a5a61f72 100644 --- a/kernel/linux/kni/kni_dev.h +++ b/kernel/linux/kni/kni_dev.h @@ -55,8 +55,6 @@ struct kni_dev { /* kni device */ struct net_device *net_dev; - struct net_device *lad_dev; - struct pci_dev *pci_dev; /* queue for packets to be sent out */ void *tx_q; @@ -100,11 +98,5 @@ void kni_net_rx(struct kni_dev *kni); void kni_net_init(struct net_device *dev); void kni_net_config_lo_mode(char *lo_str); void kni_net_poll_resp(struct kni_dev *kni); -void kni_set_ethtool_ops(struct net_device *netdev); - -int ixgbe_kni_probe(struct pci_dev *pdev, struct net_device **lad_dev); -void ixgbe_kni_remove(struct pci_dev *pdev); -int igb_kni_probe(struct pci_dev *pdev, struct net_device **lad_dev); -void igb_kni_remove(struct pci_dev *pdev); #endif diff --git a/kernel/linux/kni/kni_ethtool.c b/kernel/linux/kni/kni_ethtool.c deleted file mode 100644 index b1c84f8f03..0000000000 --- a/kernel/linux/kni/kni_ethtool.c +++ /dev/null @@ -1,229 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright(c) 2010-2014 Intel Corporation. - */ - -#include -#include -#include -#include "kni_dev.h" - -static int -kni_check_if_running(struct net_device *dev) -{ - struct kni_dev *priv = netdev_priv(dev); - - if (priv->lad_dev) - return 0; - else - return -EOPNOTSUPP; -} - -static void -kni_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->get_drvinfo(priv->lad_dev, info); -} - -/* ETHTOOL_GLINKSETTINGS replaces ETHTOOL_GSET */ -#ifndef ETHTOOL_GLINKSETTINGS -static int -kni_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->get_settings(priv->lad_dev, ecmd); -} -#endif - -/* ETHTOOL_SLINKSETTINGS replaces ETHTOOL_SSET */ -#ifndef ETHTOOL_SLINKSETTINGS -static int -kni_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->set_settings(priv->lad_dev, ecmd); -} -#endif - -static void -kni_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->get_wol(priv->lad_dev, wol); -} - -static int -kni_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->set_wol(priv->lad_dev, wol); -} - -static int -kni_nway_reset(struct net_device *dev) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->nway_reset(priv->lad_dev); -} - -static int -kni_get_eeprom_len(struct net_device *dev) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->get_eeprom_len(priv->lad_dev); -} - -static int -kni_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, - u8 *bytes) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->get_eeprom(priv->lad_dev, eeprom, - bytes); -} - -static int -kni_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, - u8 *bytes) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->set_eeprom(priv->lad_dev, eeprom, - bytes); -} - -static void -kni_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->get_ringparam(priv->lad_dev, ring); -} - -static int -kni_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->set_ringparam(priv->lad_dev, ring); -} - -static void -kni_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->get_pauseparam(priv->lad_dev, pause); -} - -static int -kni_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->set_pauseparam(priv->lad_dev, - pause); -} - -static u32 -kni_get_msglevel(struct net_device *dev) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->get_msglevel(priv->lad_dev); -} - -static void -kni_set_msglevel(struct net_device *dev, u32 data) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->set_msglevel(priv->lad_dev, data); -} - -static int -kni_get_regs_len(struct net_device *dev) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->get_regs_len(priv->lad_dev); -} - -static void -kni_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->get_regs(priv->lad_dev, regs, p); -} - -static void -kni_get_strings(struct net_device *dev, u32 stringset, u8 *data) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->get_strings(priv->lad_dev, stringset, - data); -} - -static int -kni_get_sset_count(struct net_device *dev, int sset) -{ - struct kni_dev *priv = netdev_priv(dev); - - return priv->lad_dev->ethtool_ops->get_sset_count(priv->lad_dev, sset); -} - -static void -kni_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, - u64 *data) -{ - struct kni_dev *priv = netdev_priv(dev); - - priv->lad_dev->ethtool_ops->get_ethtool_stats(priv->lad_dev, stats, - data); -} - -struct ethtool_ops kni_ethtool_ops = { - .begin = kni_check_if_running, - .get_drvinfo = kni_get_drvinfo, -#ifndef ETHTOOL_GLINKSETTINGS - .get_settings = kni_get_settings, -#endif -#ifndef ETHTOOL_SLINKSETTINGS - .set_settings = kni_set_settings, -#endif - .get_regs_len = kni_get_regs_len, - .get_regs = kni_get_regs, - .get_wol = kni_get_wol, - .set_wol = kni_set_wol, - .nway_reset = kni_nway_reset, - .get_link = ethtool_op_get_link, - .get_eeprom_len = kni_get_eeprom_len, - .get_eeprom = kni_get_eeprom, - .set_eeprom = kni_set_eeprom, - .get_ringparam = kni_get_ringparam, - .set_ringparam = kni_set_ringparam, - .get_pauseparam = kni_get_pauseparam, - .set_pauseparam = kni_set_pauseparam, - .get_msglevel = kni_get_msglevel, - .set_msglevel = kni_set_msglevel, - .get_strings = kni_get_strings, - .get_sset_count = kni_get_sset_count, - .get_ethtool_stats = kni_get_ethtool_stats, -}; - -void -kni_set_ethtool_ops(struct net_device *netdev) -{ - netdev->ethtool_ops = &kni_ethtool_ops; -} diff --git a/kernel/linux/kni/kni_misc.c b/kernel/linux/kni/kni_misc.c index b6f474de4d..af18c67c42 100644 --- a/kernel/linux/kni/kni_misc.c +++ b/kernel/linux/kni/kni_misc.c @@ -29,9 +29,6 @@ MODULE_DESCRIPTION("Kernel Module for managing kni devices"); #define KNI_MAX_DEVICES 32 -extern const struct pci_device_id ixgbe_pci_tbl[]; -extern const struct pci_device_id igb_pci_tbl[]; - /* loopback mode */ static char *lo_mode; @@ -182,15 +179,6 @@ kni_dev_remove(struct kni_dev *dev) if (!dev) return -ENODEV; -#ifdef RTE_KNI_KMOD_ETHTOOL - if (dev->pci_dev) { - if (pci_match_id(ixgbe_pci_tbl, dev->pci_dev)) - ixgbe_kni_remove(dev->pci_dev); - else if (pci_match_id(igb_pci_tbl, dev->pci_dev)) - igb_kni_remove(dev->pci_dev); - } -#endif - if (dev->net_dev) { unregister_netdev(dev->net_dev); free_netdev(dev->net_dev); @@ -306,11 +294,6 @@ kni_ioctl_create(struct net *net, uint32_t ioctl_num, struct rte_kni_device_info dev_info; struct net_device *net_dev = NULL; struct kni_dev *kni, *dev, *n; -#ifdef RTE_KNI_KMOD_ETHTOOL - struct pci_dev *found_pci = NULL; - struct net_device *lad_dev = NULL; - struct pci_dev *pci = NULL; -#endif pr_info("Creating kni...\n"); /* Check the buffer size, to avoid warning */ @@ -400,62 +383,15 @@ kni_ioctl_create(struct net *net, uint32_t ioctl_num, dev_info.function, dev_info.vendor_id, dev_info.device_id); -#ifdef RTE_KNI_KMOD_ETHTOOL - pci = pci_get_device(dev_info.vendor_id, dev_info.device_id, NULL); - - /* Support Ethtool */ - while (pci) { - pr_debug("pci_bus: %02x:%02x:%02x\n", - pci->bus->number, - PCI_SLOT(pci->devfn), - PCI_FUNC(pci->devfn)); - - if ((pci->bus->number == dev_info.bus) && - (PCI_SLOT(pci->devfn) == dev_info.devid) && - (PCI_FUNC(pci->devfn) == dev_info.function)) { - found_pci = pci; - - if (pci_match_id(ixgbe_pci_tbl, found_pci)) - ret = ixgbe_kni_probe(found_pci, &lad_dev); - else if (pci_match_id(igb_pci_tbl, found_pci)) - ret = igb_kni_probe(found_pci, &lad_dev); - else - ret = -1; - - pr_debug("PCI found: pci=0x%p, lad_dev=0x%p\n", - pci, lad_dev); - if (ret == 0) { - kni->lad_dev = lad_dev; - kni_set_ethtool_ops(kni->net_dev); - } else { - pr_err("Device not supported by ethtool"); - kni->lad_dev = NULL; - } - - kni->pci_dev = found_pci; - kni->device_id = dev_info.device_id; - break; - } - pci = pci_get_device(dev_info.vendor_id, - dev_info.device_id, pci); - } - if (pci) - pci_dev_put(pci); -#endif - - if (kni->lad_dev) - ether_addr_copy(net_dev->dev_addr, kni->lad_dev->dev_addr); - else { - /* if user has provided a valid mac address */ - if (is_valid_ether_addr(dev_info.mac_addr)) - memcpy(net_dev->dev_addr, dev_info.mac_addr, ETH_ALEN); - else - /* - * Generate random mac address. eth_random_addr() is the - * newer version of generating mac address in kernel. - */ - random_ether_addr(net_dev->dev_addr); - } + /* if user has provided a valid mac address */ + if (is_valid_ether_addr(dev_info.mac_addr)) + memcpy(net_dev->dev_addr, dev_info.mac_addr, ETH_ALEN); + else + /* + * Generate random mac address. eth_random_addr() is the + * newer version of generating mac address in kernel. + */ + random_ether_addr(net_dev->dev_addr); if (dev_info.mtu) net_dev->mtu = dev_info.mtu; diff --git a/kernel/linux/kni/meson.build b/kernel/linux/kni/meson.build index 877ff5c474..a9f48b0e6b 100644 --- a/kernel/linux/kni/meson.build +++ b/kernel/linux/kni/meson.build @@ -1,20 +1,17 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi -subdir('ethtool') - kni_mkfile = custom_target('rte_kni_makefile', output: 'Makefile', command: ['touch', '@OUTPUT@']) kni_sources = files( - 'kni_ethtool.c', 'kni_misc.c', 'kni_net.c', 'Kbuild') custom_target('rte_kni', - input: kni_sources + kni_igb_sources + kni_ixgbe_sources, + input: kni_sources, output: 'rte_kni.ko', command: ['make', '-j4', '-C', kernel_dir, 'M=' + meson.current_build_dir(), @@ -23,9 +20,7 @@ custom_target('rte_kni', ' -I' + meson.source_root() + '/lib/librte_eal/common/include' + ' -I' + meson.source_root() + '/lib/librte_eal/linux/eal/include' + ' -I' + meson.build_root() + - ' -I' + meson.current_source_dir() + - ' -I' + meson.current_source_dir() + '/ethtool/ixgbe' + - ' -I' + meson.current_source_dir() + '/ethtool/igb', + ' -I' + meson.current_source_dir(), 'modules'], depends: kni_mkfile, console: true, diff --git a/lib/librte_kni/rte_kni.c b/lib/librte_kni/rte_kni.c index e6507b07db..a0f1e37671 100644 --- a/lib/librte_kni/rte_kni.c +++ b/lib/librte_kni/rte_kni.c @@ -242,11 +242,6 @@ rte_kni_alloc(struct rte_mempool *pktmbuf_pool, kni->ops.port_id = UINT16_MAX; memset(&dev_info, 0, sizeof(dev_info)); - dev_info.bus = conf->addr.bus; - dev_info.devid = conf->addr.devid; - dev_info.function = conf->addr.function; - dev_info.vendor_id = conf->id.vendor_id; - dev_info.device_id = conf->id.device_id; dev_info.core_id = conf->core_id; dev_info.force_bind = conf->force_bind; dev_info.group_id = conf->group_id; diff --git a/lib/librte_kni/rte_kni.h b/lib/librte_kni/rte_kni.h index 45073af109..e11a32b399 100644 --- a/lib/librte_kni/rte_kni.h +++ b/lib/librte_kni/rte_kni.h @@ -63,8 +63,8 @@ struct rte_kni_conf { uint32_t core_id; /* Core ID to bind kernel thread on */ uint16_t group_id; /* Group ID */ unsigned mbuf_size; /* mbuf size */ - struct rte_pci_addr addr; - struct rte_pci_id id; + struct rte_pci_addr addr; /* depreciated */ + struct rte_pci_id id; /* depreciated */ __extension__ uint8_t force_bind : 1; /* Flag to bind kernel thread */