examples/ip_pipeline: update edge router use case
Update edge router usecase config files to use bulk commands. Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This commit is contained in:
Piotr Azarewicz
Thomas Monjalon
parent
ccbb3dbde0
commit
f1aefdbf66
@ -1,6 +1,6 @@
|
||||
; BSD LICENSE
|
||||
;
|
||||
; Copyright(c) 2015 Intel Corporation. All rights reserved.
|
||||
; Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
|
||||
; All rights reserved.
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
@ -36,9 +36,9 @@
|
||||
; network) contains the following functional blocks: Packet RX & Routing,
|
||||
; Traffic management and Packet TX. The input packets are assumed to be
|
||||
; IPv4, while the output packets are Q-in-Q IPv4.
|
||||
|
||||
;
|
||||
; A simple implementation for this functional pipeline is presented below.
|
||||
|
||||
;
|
||||
; Packet Rx & Traffic Management Packet Tx
|
||||
; Routing (Pass-Through) (Pass-Through)
|
||||
; _____________________ SWQ0 ______________________ SWQ4 _____________________
|
||||
@ -50,11 +50,23 @@
|
||||
; | | SWQ3 | | SWQ7 | |
|
||||
; RXQ3.0 --->| |----->| |----->| |---> TXQ3.0
|
||||
; |_____________________| |______________________| |_____________________|
|
||||
; | _|_ ^ _|_ ^ _|_ ^ _|_ ^
|
||||
; | |___|||___|||___|||___||
|
||||
; +--> SINK0 |___|||___|||___|||___||
|
||||
; (route miss) |__| |__| |__| |__|
|
||||
; TM0 TM1 TM2 TM3
|
||||
; | | ^ | ^ | ^ | ^
|
||||
; | |__| |__| |__| |__|
|
||||
; +--> SINK0 TM0 TM1 TM2 TM3
|
||||
; (Default)
|
||||
;
|
||||
; Input packet: Ethernet/IPv4
|
||||
; Output packet: Ethernet/QinQ/IPv4
|
||||
;
|
||||
; Packet buffer layout:
|
||||
; # Field Name Offset (Bytes) Size (Bytes)
|
||||
; 0 Mbuf 0 128
|
||||
; 1 Headroom 128 128
|
||||
; 2 Ethernet header 256 14
|
||||
; 3 IPv4 header 270 20
|
||||
|
||||
[EAL]
|
||||
log_level = 0
|
||||
|
||||
[PIPELINE0]
|
||||
type = MASTER
|
||||
@ -67,7 +79,7 @@ pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
|
||||
pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
|
||||
encap = ethernet_qinq
|
||||
qinq_sched = test
|
||||
ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
|
||||
ip_hdr_offset = 270
|
||||
|
||||
[PIPELINE2]
|
||||
type = PASS-THROUGH
|
||||
|
||||
@ -1,3 +1,7 @@
|
||||
#
|
||||
# run ./config/edge_router_downstream.sh
|
||||
#
|
||||
|
||||
################################################################################
|
||||
# Routing: Ether QinQ, ARP off
|
||||
################################################################################
|
||||
@ -6,5 +10,4 @@ p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 qinq 256 257
|
||||
p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
|
||||
p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
|
||||
p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
|
||||
|
||||
p 1 route ls
|
||||
#p 1 route ls
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
; BSD LICENSE
|
||||
;
|
||||
; Copyright(c) 2015 Intel Corporation. All rights reserved.
|
||||
; Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
|
||||
; All rights reserved.
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
@ -29,6 +29,7 @@
|
||||
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
|
||||
; An edge router typically sits between two networks such as the provider
|
||||
; core network and the provider access network. A typical packet processing
|
||||
; pipeline for the upstream traffic (i.e. traffic from access to core
|
||||
@ -36,10 +37,10 @@
|
||||
; Flow classification, Metering, Routing and Packet TX. The input packets
|
||||
; are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
|
||||
; (with variable number of labels per route).
|
||||
|
||||
;
|
||||
; A simple implementation for this functional pipeline is presented below.
|
||||
|
||||
; Packet Rx & Pass-Through Flow-Classification Flow-Actions Routing
|
||||
;
|
||||
; Packet RX & Pass-Through Flow Classification Flow Actions Routing
|
||||
: Firewall
|
||||
; __________ SWQ0 __________ SWQ4 __________ SWQ8 __________ SWQ12 __________
|
||||
; RXQ0.0 --->| |------>| |------>| |------>| |------>| |------> TXQ0.0
|
||||
@ -51,8 +52,21 @@
|
||||
; RXQ3.0 --->| |------>| |------>| |------>| |------>| |------> TXQ3.0
|
||||
; |__________| |__________| |__________| |__________| |__________|
|
||||
; | | |
|
||||
; +--> SINK0 (Default) +--> SINK1 (Default) +--> SINK2 (Route Miss)
|
||||
; +--> SINK0 (Default) +--> SINK1 (Default) +--> SINK2 (Default)
|
||||
;
|
||||
; Input packet: Ethernet/QinQ/IPv4
|
||||
; Output packet: Ethernet/MPLS/IPv4
|
||||
;
|
||||
; Packet buffer layout:
|
||||
; # Field Name Offset (Bytes) Size (Bytes)
|
||||
; 0 Mbuf 0 128
|
||||
; 1 Headroom 128 128
|
||||
; 2 Ethernet header 256 14
|
||||
; 3 QinQ header 270 8
|
||||
; 4 IPv4 header 278 20
|
||||
|
||||
[EAL]
|
||||
log_level = 0
|
||||
|
||||
[PIPELINE0]
|
||||
type = MASTER
|
||||
@ -72,10 +86,10 @@ core = 2
|
||||
pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
|
||||
pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
|
||||
dma_size = 8
|
||||
dma_dst_offset = 128; mbuf (128)
|
||||
dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
|
||||
dma_dst_offset = 128
|
||||
dma_src_offset = 268; 1st Ethertype offset
|
||||
dma_src_mask = 00000FFF00000FFF; qinq
|
||||
dma_hash_offset = 136; dma_dst_offset + dma_size = 136
|
||||
dma_hash_offset = 136; dma_dst_offset + dma_size
|
||||
|
||||
[PIPELINE3]
|
||||
type = FLOW_CLASSIFICATION
|
||||
@ -86,7 +100,7 @@ n_flows = 65536
|
||||
key_size = 8; dma_size
|
||||
key_offset = 128; dma_dst_offset
|
||||
hash_offset = 136; dma_hash_offset
|
||||
flowid_offset = 192; mbuf (128) + 64
|
||||
flowid_offset = 192
|
||||
|
||||
[PIPELINE4]
|
||||
type = FLOW_ACTIONS
|
||||
@ -96,7 +110,7 @@ pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
|
||||
n_flows = 65536
|
||||
n_meters_per_flow = 1
|
||||
flow_id_offset = 192; flowid_offset
|
||||
ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
|
||||
ip_hdr_offset = 278
|
||||
color_offset = 196; flowid_offset + sizeof(flow_id)
|
||||
|
||||
[PIPELINE5]
|
||||
@ -106,5 +120,5 @@ pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
|
||||
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
|
||||
encap = ethernet_mpls
|
||||
mpls_color_mark = yes
|
||||
ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
|
||||
ip_hdr_offset = 278
|
||||
color_offset = 196; flowid_offset + sizeof(flow_id)
|
||||
|
||||
@ -1,24 +1,26 @@
|
||||
################################################
|
||||
# Firewall Rules:4 for 4 ports
|
||||
################################################
|
||||
p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
|
||||
p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
|
||||
p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
|
||||
p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
|
||||
p 1 firewall add default 4 #SINK0
|
||||
|
||||
#
|
||||
# run ./config/edge_router_upstream.sh
|
||||
#
|
||||
|
||||
################################################################################
|
||||
# Flow classification
|
||||
# Firewall
|
||||
################################################################################
|
||||
p 1 firewall add default 4 #SINK0
|
||||
p 1 firewall add bulk ./config/edge_router_upstream_firewall.txt
|
||||
#p 1 firewall ls
|
||||
|
||||
################################################################################
|
||||
# Flow Classification
|
||||
################################################################################
|
||||
p 3 flow add default 4 #SINK1
|
||||
p 3 flow add qinq all 65536 4
|
||||
p 3 flow add qinq bulk ./config/edge_router_upstream_flow.txt
|
||||
#p 3 flow ls
|
||||
|
||||
################################################################################
|
||||
# Flow Actions - Metering
|
||||
# Flow Actions - Metering and Policing
|
||||
################################################################################
|
||||
p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
|
||||
p 4 flows 65536 ports 4
|
||||
p 4 action flow bulk ./config/edge_router_upstream_action.txt
|
||||
#p 4 action flow ls
|
||||
|
||||
################################################################################
|
||||
# Routing: Ether MPLS, ARP off
|
||||
@ -28,11 +30,4 @@ p 5 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 mpls 0:1
|
||||
p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
|
||||
p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
|
||||
p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
|
||||
|
||||
################################################################################
|
||||
# List all configurations
|
||||
################################################################################
|
||||
p 1 firewall ls
|
||||
#p 3 flow ls
|
||||
#p 4 flow actions ls
|
||||
p 5 route ls
|
||||
#p 5 route ls
|
||||
|
||||
Loading…
Reference in New Issue
Block a user