From fda34680eb9abf53872bde66e119f4c0288fd62f Mon Sep 17 00:00:00 2001 From: Ciara Power Date: Thu, 3 Sep 2020 16:26:41 +0100 Subject: [PATCH] examples: remove legacy sections of makefiles The example app makefiles contained sections using the legacy method of compiling with make. These are no longer needed, and are removed, leaving only the section that uses pkg-config for the make build. Signed-off-by: Ciara Power Acked-by: Nicolas Chautru --- examples/bbdev_app/Makefile | 23 ++------------- examples/bond/Makefile | 34 ++-------------------- examples/cmdline/Makefile | 29 ++----------------- examples/distributor/Makefile | 30 ++----------------- examples/eventdev_pipeline/Makefile | 23 ++------------- examples/fips_validation/Makefile | 34 ++-------------------- examples/flow_classify/Makefile | 29 ++----------------- examples/flow_filtering/Makefile | 23 ++------------- examples/helloworld/Makefile | 23 ++------------- examples/ioat/Makefile | 22 ++------------ examples/ip_fragmentation/Makefile | 29 ++----------------- examples/ip_pipeline/Makefile | 36 ++--------------------- examples/ip_reassembly/Makefile | 29 ++----------------- examples/ipsec-secgw/Makefile | 36 ++--------------------- examples/ipv4_multicast/Makefile | 29 ++----------------- examples/kni/Makefile | 27 ++---------------- examples/l2fwd-cat/Makefile | 38 ++----------------------- examples/l2fwd-crypto/Makefile | 28 ++---------------- examples/l2fwd-event/Makefile | 22 ++------------ examples/l2fwd-jobstats/Makefile | 23 ++------------- examples/l2fwd-keepalive/Makefile | 23 ++------------- examples/l2fwd/Makefile | 23 ++------------- examples/l3fwd-acl/Makefile | 28 ++---------------- examples/l3fwd-graph/Makefile | 23 ++------------- examples/l3fwd-power/Makefile | 36 ++--------------------- examples/l3fwd/Makefile | 23 ++------------- examples/link_status_interrupt/Makefile | 22 ++------------ examples/ntb/Makefile | 32 ++------------------- examples/packet_ordering/Makefile | 22 ++------------ examples/ptpclient/Makefile | 28 ++---------------- examples/qos_meter/Makefile | 28 ++---------------- examples/qos_sched/Makefile | 31 ++------------------ examples/rxtx_callbacks/Makefile | 31 ++------------------ examples/service_cores/Makefile | 28 ++---------------- examples/skeleton/Makefile | 29 ++----------------- examples/tep_termination/Makefile | 27 ++---------------- examples/timer/Makefile | 28 ++---------------- examples/vdpa/Makefile | 32 ++------------------- examples/vhost/Makefile | 30 ++----------------- examples/vhost_blk/Makefile | 31 ++------------------ examples/vhost_crypto/Makefile | 31 ++------------------ examples/vmdq/Makefile | 23 ++------------- examples/vmdq_dcb/Makefile | 31 ++------------------ 43 files changed, 129 insertions(+), 1078 deletions(-) diff --git a/examples/bbdev_app/Makefile b/examples/bbdev_app/Makefile index 3c8eb75a4e..2f156736d1 100644 --- a/examples/bbdev_app/Makefile +++ b/examples/bbdev_app/Makefile @@ -8,7 +8,9 @@ APP = bbdev SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,22 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/bond/Makefile b/examples/bond/Makefile index 4e4289e151..4e560f574c 100644 --- a/examples/bond/Makefile +++ b/examples/bond/Makefile @@ -8,7 +8,9 @@ APP = bond_app SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -41,33 +43,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API - -ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y) -LDLIBS += -lrte_pmd_bond -endif - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/cmdline/Makefile b/examples/cmdline/Makefile index 7325097722..d8f51fb39b 100644 --- a/examples/cmdline/Makefile +++ b/examples/cmdline/Makefile @@ -8,7 +8,9 @@ APP = cmdline SRCS-y := main.c commands.c parse_obj_list.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,28 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -# binary name -APP = cmdline - -# all source are stored in SRCS-y -SRCS-y := main.c commands.c parse_obj_list.c - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/distributor/Makefile b/examples/distributor/Makefile index 6e3fef9813..4116064581 100644 --- a/examples/distributor/Makefile +++ b/examples/distributor/Makefile @@ -8,7 +8,9 @@ APP = distributor_app SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,29 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -EXTRA_CFLAGS += -O3 -Wfatal-errors - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/eventdev_pipeline/Makefile b/examples/eventdev_pipeline/Makefile index 95a8d0884a..05c6f865ad 100644 --- a/examples/eventdev_pipeline/Makefile +++ b/examples/eventdev_pipeline/Makefile @@ -10,7 +10,9 @@ SRCS-y += pipeline_worker_generic.c SRCS-y += pipeline_worker_tx.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,22 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/fips_validation/Makefile b/examples/fips_validation/Makefile index b44ca2ee62..7ba9bcfea6 100644 --- a/examples/fips_validation/Makefile +++ b/examples/fips_validation/Makefile @@ -18,7 +18,9 @@ SRCS-y += fips_validation_xts.c SRCS-y += main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -47,33 +49,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -INC += $(sort $(wildcard *.h)) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -I$(SRCDIR) -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/flow_classify/Makefile b/examples/flow_classify/Makefile index 161d576b60..4c215daf1b 100644 --- a/examples/flow_classify/Makefile +++ b/examples/flow_classify/Makefile @@ -8,7 +8,9 @@ APP = flow_classify SRCS-y := flow_classify.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,28 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/flow_filtering/Makefile b/examples/flow_filtering/Makefile index 010a1383e2..0577e52985 100644 --- a/examples/flow_filtering/Makefile +++ b/examples/flow_filtering/Makefile @@ -6,7 +6,9 @@ APP = flow SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -35,22 +37,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/helloworld/Makefile b/examples/helloworld/Makefile index 94a1074cf6..2eef6e4527 100644 --- a/examples/helloworld/Makefile +++ b/examples/helloworld/Makefile @@ -8,7 +8,9 @@ APP = helloworld SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,22 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/ioat/Makefile b/examples/ioat/Makefile index 86308854ea..9645c27d2f 100644 --- a/examples/ioat/Makefile +++ b/examples/ioat/Makefile @@ -8,7 +8,9 @@ APP = ioatfwd SRCS-y := ioatfwd.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,21 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/ip_fragmentation/Makefile b/examples/ip_fragmentation/Makefile index 3f4db3f59d..f6baf635bb 100644 --- a/examples/ip_fragmentation/Makefile +++ b/examples/ip_fragmentation/Makefile @@ -9,7 +9,9 @@ APP = ip_fragmentation SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,28 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/ip_pipeline/Makefile b/examples/ip_pipeline/Makefile index 1116bb6c18..d25e39a464 100644 --- a/examples/ip_pipeline/Makefile +++ b/examples/ip_pipeline/Makefile @@ -21,7 +21,9 @@ SRCS-y += tmgr.c SRCS-y += cryptodev.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -57,35 +59,3 @@ build: clean: rm -f build/$(APP)* build/*.o test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(info This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -clean: -else - -INC += $(sort $(wildcard *.h)) - -SRCS-$(CONFIG_RTE_LIBRTE_PIPELINE) := $(SRCS-y) - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -I$(SRCDIR) -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif -endif diff --git a/examples/ip_reassembly/Makefile b/examples/ip_reassembly/Makefile index be9e541bd6..479b802907 100644 --- a/examples/ip_reassembly/Makefile +++ b/examples/ip_reassembly/Makefile @@ -9,7 +9,9 @@ APP = ip_reassembly SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -38,28 +40,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/ipsec-secgw/Makefile b/examples/ipsec-secgw/Makefile index b5ccbca858..5e6cb51eac 100644 --- a/examples/ipsec-secgw/Makefile +++ b/examples/ipsec-secgw/Makefile @@ -23,7 +23,9 @@ SRCS-y += flow.c CFLAGS += -gdwarf-2 # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -54,35 +56,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(MAKECMDGOALS),clean) -ifneq ($(CONFIG_RTE_LIBRTE_IPSEC),y) -$(error "RTE_LIBRTE_IPSEC is required to build ipsec-secgw") -endif -endif - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O3 -gdwarf-2 -CFLAGS += $(WERROR_FLAGS) -ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y) -CFLAGS_sa.o += -diag-disable=vec -endif - -ifeq ($(DEBUG),1) -CFLAGS += -DIPSEC_DEBUG -fstack-protector-all -O0 -endif - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/ipv4_multicast/Makefile b/examples/ipv4_multicast/Makefile index 0ed78c1cc2..fb1ebdd433 100644 --- a/examples/ipv4_multicast/Makefile +++ b/examples/ipv4_multicast/Makefile @@ -9,7 +9,9 @@ APP = ipv4_multicast SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -38,28 +40,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/kni/Makefile b/examples/kni/Makefile index 8fcb67c619..fa9fa85319 100644 --- a/examples/kni/Makefile +++ b/examples/kni/Makefile @@ -8,7 +8,9 @@ APP = kni SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -38,26 +40,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(error This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -endif - -CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l2fwd-cat/Makefile b/examples/l2fwd-cat/Makefile index d767a10d7d..c5f82fb548 100644 --- a/examples/l2fwd-cat/Makefile +++ b/examples/l2fwd-cat/Makefile @@ -8,7 +8,9 @@ APP = l2fwd-cat SRCS-y := l2fwd-cat.c cat.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,37 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -ifeq ($(PQOS_INSTALL_PATH),) -$(error "Please define PQOS_INSTALL_PATH environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -EXTRA_CFLAGS += -O3 -g -Wfatal-errors - -CFLAGS += -I$(PQOS_INSTALL_PATH)/../include - -LDLIBS += -L$(PQOS_INSTALL_PATH) -LDLIBS += -lpqos - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l2fwd-crypto/Makefile b/examples/l2fwd-crypto/Makefile index cdbb91a1e6..4953ee2b95 100644 --- a/examples/l2fwd-crypto/Makefile +++ b/examples/l2fwd-crypto/Makefile @@ -8,7 +8,9 @@ APP = l2fwd-crypto SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,27 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) - -ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y) -ifeq ($(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER),y) -LDLIBS += -lrte_pmd_crypto_scheduler -endif -endif - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l2fwd-event/Makefile b/examples/l2fwd-event/Makefile index ddee388ae6..109b7caa4e 100644 --- a/examples/l2fwd-event/Makefile +++ b/examples/l2fwd-event/Makefile @@ -14,7 +14,9 @@ SRCS-y += l2fwd_event_generic.c SRCS-y += l2fwd_event_internal_port.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -43,21 +45,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l2fwd-jobstats/Makefile b/examples/l2fwd-jobstats/Makefile index bdb83c3e1c..d3ff2d3ee9 100644 --- a/examples/l2fwd-jobstats/Makefile +++ b/examples/l2fwd-jobstats/Makefile @@ -8,7 +8,9 @@ APP = l2fwd-jobstats SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,22 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l2fwd-keepalive/Makefile b/examples/l2fwd-keepalive/Makefile index 9fd9db4974..c327efab36 100644 --- a/examples/l2fwd-keepalive/Makefile +++ b/examples/l2fwd-keepalive/Makefile @@ -8,7 +8,9 @@ APP = l2fwd-keepalive SRCS-y := main.c shm.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,22 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API -LDFLAGS += -lrt - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l2fwd/Makefile b/examples/l2fwd/Makefile index 15105ac57e..b180deb862 100644 --- a/examples/l2fwd/Makefile +++ b/examples/l2fwd/Makefile @@ -8,7 +8,9 @@ APP = l2fwd SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,22 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -# Add flag to allow experimental API as l2fwd uses rte_ethdev_set_ptype API -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l3fwd-acl/Makefile b/examples/l3fwd-acl/Makefile index 6644a2cf1e..eeb6288dae 100644 --- a/examples/l3fwd-acl/Makefile +++ b/examples/l3fwd-acl/Makefile @@ -8,7 +8,9 @@ APP = l3fwd-acl SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,27 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l3fwd-graph/Makefile b/examples/l3fwd-graph/Makefile index f3cf275ece..368ac21147 100644 --- a/examples/l3fwd-graph/Makefile +++ b/examples/l3fwd-graph/Makefile @@ -8,7 +8,9 @@ APP = l3fwd-graph SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,22 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -I$(SRCDIR) -CFLAGS += -O3 $(USER_FLAGS) -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/l3fwd-power/Makefile b/examples/l3fwd-power/Makefile index ac1ccdcf61..d69854c9f8 100644 --- a/examples/l3fwd-power/Makefile +++ b/examples/l3fwd-power/Makefile @@ -8,7 +8,9 @@ APP = l3fwd-power SRCS-y := main.c perf_core.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,35 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(info This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -else - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -LDLIBS += -lm -lrte_telemetry - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk -endif -endif diff --git a/examples/l3fwd/Makefile b/examples/l3fwd/Makefile index b25a515813..d87eafcd0c 100644 --- a/examples/l3fwd/Makefile +++ b/examples/l3fwd/Makefile @@ -9,7 +9,9 @@ SRCS-y := main.c l3fwd_lpm.c l3fwd_em.c l3fwd_event.c SRCS-y += l3fwd_event_generic.c l3fwd_event_internal_port.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -38,22 +40,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -I$(SRCDIR) -CFLAGS += -O3 $(USER_FLAGS) -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/link_status_interrupt/Makefile b/examples/link_status_interrupt/Makefile index f16916faa9..b9b02124a4 100644 --- a/examples/link_status_interrupt/Makefile +++ b/examples/link_status_interrupt/Makefile @@ -8,7 +8,9 @@ APP = link_status_interrupt SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,21 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/ntb/Makefile b/examples/ntb/Makefile index 81ec6017f5..4675570fd2 100644 --- a/examples/ntb/Makefile +++ b/examples/ntb/Makefile @@ -8,8 +8,9 @@ APP = ntb_fwd SRCS-y := ntb_fwd.c # Build using pkg-config variables if possible -$(shell pkg-config --exists libdpdk) -ifeq ($(.SHELLSTATUS),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -42,30 +43,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared rmdir --ignore-fail-on-non-empty build - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, can be overridden by command line or environment -RTE_TARGET ?= x86_64-native-linuxapp-gcc - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) -$(info This application can only operate in a linuxapp environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -else - -CFLAGS += -D_FILE_OFFSET_BITS=64 -CFLAGS += -O2 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif -endif diff --git a/examples/packet_ordering/Makefile b/examples/packet_ordering/Makefile index f99b69dc25..e8d6c57b72 100644 --- a/examples/packet_ordering/Makefile +++ b/examples/packet_ordering/Makefile @@ -8,7 +8,9 @@ APP = packet_ordering SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,21 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/ptpclient/Makefile b/examples/ptpclient/Makefile index a9555fc66a..86059d8b28 100644 --- a/examples/ptpclient/Makefile +++ b/examples/ptpclient/Makefile @@ -8,7 +8,9 @@ APP = ptpclient SRCS-y := ptpclient.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,27 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/qos_meter/Makefile b/examples/qos_meter/Makefile index 165e07ee25..7a53818296 100644 --- a/examples/qos_meter/Makefile +++ b/examples/qos_meter/Makefile @@ -8,7 +8,9 @@ APP = qos_meter SRCS-y := main.c rte_policer.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -39,27 +41,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile index 0dd7d91055..408074a9f5 100644 --- a/examples/qos_sched/Makefile +++ b/examples/qos_sched/Makefile @@ -8,7 +8,9 @@ APP = qos_sched SRCS-y := main.c args.c init.c app_thread.c cfg_file.c cmdline.c stats.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,30 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(info This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -clean: -else - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif -endif diff --git a/examples/rxtx_callbacks/Makefile b/examples/rxtx_callbacks/Makefile index 10e5f14d5c..bac3015d34 100644 --- a/examples/rxtx_callbacks/Makefile +++ b/examples/rxtx_callbacks/Makefile @@ -8,7 +8,9 @@ APP = rxtx_callbacks SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,30 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) - -# rte_eth_read_clock is experimental -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -EXTRA_CFLAGS += -O3 -g -Wfatal-errors - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/service_cores/Makefile b/examples/service_cores/Makefile index e742d88f61..beb7ea0b82 100644 --- a/examples/service_cores/Makefile +++ b/examples/service_cores/Makefile @@ -8,7 +8,9 @@ APP = service_cores SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,27 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif diff --git a/examples/skeleton/Makefile b/examples/skeleton/Makefile index 5f5acf7159..ca52abba42 100644 --- a/examples/skeleton/Makefile +++ b/examples/skeleton/Makefile @@ -8,7 +8,9 @@ APP = basicfwd SRCS-y := basicfwd.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,28 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -EXTRA_CFLAGS += -O3 -g -Wfatal-errors - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile index 548ca3cee3..443bcb190e 100644 --- a/examples/tep_termination/Makefile +++ b/examples/tep_termination/Makefile @@ -8,7 +8,9 @@ APP = tep_termination SRCS-y := main.c vxlan_setup.c vxlan.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -41,26 +43,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(error This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -endif - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -Wno-deprecated-declarations - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/timer/Makefile b/examples/timer/Makefile index b40b65995e..0f6523afa6 100644 --- a/examples/timer/Makefile +++ b/examples/timer/Makefile @@ -8,7 +8,9 @@ APP = timer SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,27 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/vdpa/Makefile b/examples/vdpa/Makefile index bc0b6793e6..c4b2184ead 100644 --- a/examples/vdpa/Makefile +++ b/examples/vdpa/Makefile @@ -9,7 +9,9 @@ SRCS-y := main.c CFLAGS += -DALLOW_EXPERIMENTAL_API # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -38,31 +40,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(info This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -else - -CFLAGS += -O2 -D_FILE_OFFSET_BITS=64 -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -D_GNU_SOURCE -CFLAGS += -DALLOW_EXPERIMENTAL_API - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif # linuxapp - -endif # pkg-config diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile index ef6f3550f3..cec59d0e0f 100644 --- a/examples/vhost/Makefile +++ b/examples/vhost/Makefile @@ -8,7 +8,9 @@ APP = vhost-switch SRCS-y := main.c virtio_net.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -41,29 +43,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(info This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -else - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O2 -D_FILE_OFFSET_BITS=64 -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif -endif diff --git a/examples/vhost_blk/Makefile b/examples/vhost_blk/Makefile index 3952791784..792591386e 100644 --- a/examples/vhost_blk/Makefile +++ b/examples/vhost_blk/Makefile @@ -8,8 +8,9 @@ APP = vhost-blk SRCS-y := blk.c vhost_blk.c vhost_blk_compat.c # Build using pkg-config variables if possible -$(shell pkg-config --exists libdpdk) -ifeq ($(.SHELLSTATUS),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -42,29 +43,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(info This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -else - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O2 -D_FILE_OFFSET_BITS=64 -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif -endif diff --git a/examples/vhost_crypto/Makefile b/examples/vhost_crypto/Makefile index 28e3e4de74..27abd91998 100644 --- a/examples/vhost_crypto/Makefile +++ b/examples/vhost_crypto/Makefile @@ -9,7 +9,9 @@ SRCS-y := main.c CFLAGS += -DALLOW_EXPERIMENTAL_API # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -38,30 +40,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y) -$(info This application can only operate in a linux environment, \ -please change the definition of the RTE_TARGET environment variable) -all: -else - -CFLAGS += -DALLOW_EXPERIMENTAL_API -CFLAGS += -O2 -D_FILE_OFFSET_BITS=64 -CFLAGS += $(WERROR_FLAGS) - -include $(RTE_SDK)/mk/rte.extapp.mk - -endif # Linux - -endif # pkg-config diff --git a/examples/vmdq/Makefile b/examples/vmdq/Makefile index b73373d3f5..de527281eb 100644 --- a/examples/vmdq/Makefile +++ b/examples/vmdq/Makefile @@ -8,7 +8,9 @@ APP = vmdq_app SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,22 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -EXTRA_CFLAGS += -O3 - -include $(RTE_SDK)/mk/rte.extapp.mk -endif diff --git a/examples/vmdq_dcb/Makefile b/examples/vmdq_dcb/Makefile index 8d8baf729b..9c9049d85e 100644 --- a/examples/vmdq_dcb/Makefile +++ b/examples/vmdq_dcb/Makefile @@ -8,7 +8,9 @@ APP = vmdq_dcb_app SRCS-y := main.c # Build using pkg-config variables if possible -ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) +ifneq ($(shell pkg-config --exists libdpdk && echo 0),0) +$(error "no installation of DPDK found") +endif all: shared .PHONY: shared static @@ -37,30 +39,3 @@ build: clean: rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared test -d build && rmdir -p build || true - -else # Build using legacy build system - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, detect a build directory, by looking for a path with a .config -RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) - -include $(RTE_SDK)/mk/rte.vars.mk - -CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif -ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y) -CFLAGS_main.o += -diag-disable=vec -endif -EXTRA_CFLAGS += -O3 -g - -include $(RTE_SDK)/mk/rte.extapp.mk -endif