net/mrvl: rename PMD as mvpp2

The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.

This patch doesn't introduce any change except renaming.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

MAINTAINERS

@@ -486,15 +486,15 @@ F: drivers/net/mlx5/
 F: doc/guides/nics/mlx5.rst
 F: doc/guides/nics/features/mlx5.ini
 
-Marvell mrvl
+Marvell mvpp2
 M: Jacek Siuda <jck@semihalf.com>
 M: Tomasz Duszynski <tdu@semihalf.com>
 M: Dmitri Epshtein <dima@marvell.com>
 M: Natalie Samsonov <nsamsono@marvell.com>
 M: Jianbo Liu <jianbo.liu@arm.com>
-F: drivers/net/mrvl/
+F: drivers/net/mvpp2/
-F: doc/guides/nics/mrvl.rst
+F: doc/guides/nics/mvpp2.rst
-F: doc/guides/nics/features/mrvl.ini
+F: doc/guides/nics/features/mvpp2.ini
 
 Microsoft vdev_netvsc - EXPERIMENTAL
 M: Matan Azrad <matan@mellanox.com>

config/common_base

@@ -383,7 +383,7 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
 #
 # Compile Marvell PMD driver
 #
-CONFIG_RTE_LIBRTE_MRVL_PMD=n
+CONFIG_RTE_LIBRTE_MVPP2_PMD=n
 
 #
 # Compile virtual device driver for NetVSC on Hyper-V/Azure

doc/guides/cryptodevs/mrvl.rst

@@ -86,7 +86,7 @@ Currently there are two driver specific compilation options in
     Toggle display of debugging messages.
 
 For a list of prerequisites please refer to `Prerequisites` section in
-:ref:`MRVL Poll Mode Driver <mrvl_poll_mode_driver>` guide.
+:ref:`MVPP2 Poll Mode Driver <mvpp2_poll_mode_driver>` guide.
 
 MRVL CRYPTO PMD requires MUSDK built with EIP197 support thus following
 extra option must be passed to the library configuration script:
@@ -123,7 +123,7 @@ operation:
 
 .. code-block:: console
 
-   ./l2fwd-crypto --vdev=net_mrvl,iface=eth0 --vdev=crypto_mrvl -- \
+   ./l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mrvl -- \
      --cipher_op ENCRYPT --cipher_algo aes-cbc \
      --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f  \
      --auth_op GENERATE --auth_algo sha1-hmac \

doc/guides/nics/features/mvpp2.ini

@@ -1,5 +1,5 @@
 ;
-; Supported features of the 'mrvl' network poll mode driver.
+; Supported features of the 'mvpp2' network poll mode driver.
 ;
 ; Refer to default.ini for the full list of available PMD features.
 ;

doc/guides/nics/index.rst

@@ -30,7 +30,7 @@ Network Interface Controller Drivers
     liquidio
     mlx4
     mlx5
-    mrvl
+    mvpp2
     nfp
     octeontx
     qede

doc/guides/nics/mvpp2.rst

@@ -29,12 +29,12 @@
     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
     OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-.. _mrvl_poll_mode_driver:
+.. _mvpp2_poll_mode_driver:
 
-MRVL Poll Mode Driver
+MVPP2 Poll Mode Driver
 ======================
 
-The MRVL PMD (librte_pmd_mrvl) provides poll mode driver support
+The MVPP2 PMD (librte_pmd_mvpp2) provides poll mode driver support
 for the Marvell PPv2 (Packet Processor v2) 1/10 Gbps adapter.
 
 Detailed information about SoCs that use PPv2 can be obtained here:
@@ -52,7 +52,7 @@ Detailed information about SoCs that use PPv2 can be obtained here:
 Features
 --------
 
-Features of the MRVL PMD are:
+Features of the MVPP2 PMD are:
 
 - Speed capabilities
 - Link status
@@ -136,9 +136,9 @@ Config File Options
 
 The following options can be modified in the ``config`` file.
 
-- ``CONFIG_RTE_LIBRTE_MRVL_PMD`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_MVPP2_PMD`` (default ``n``)
 
-    Toggle compilation of the librte_pmd_mrvl driver.
+    Toggle compilation of the librte mvpp2 driver.
 
 
 QoS Configuration
@@ -294,7 +294,7 @@ Usage example
 
 .. code-block:: console
 
-   ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2,cfg=/home/user/mrvl.conf \
+   ./testpmd --vdev=eth_mvpp2,iface=eth0,iface=eth2,cfg=/home/user/mrvl.conf \
      -c 7 -- -i -a --disable-hw-vlan-strip --rxq=3 --txq=3
 
 
@@ -321,7 +321,7 @@ the path to the MUSDK installation directory needs to be exported.
    export LIBMUSDK_PATH=<musdk>/usr/local
    export CROSS=aarch64-linux-gnu-
    make config T=arm64-armv8a-linuxapp-gcc
-   sed -ri 's,(MRVL_PMD=)n,\1y,' build/.config
+   sed -ri 's,(MVPP2_PMD=)n,\1y,' build/.config
    make
 
 Flow API
@@ -428,7 +428,7 @@ Before proceeding run testpmd user application:
 
 .. code-block:: console
 
-   ./testpmd --vdev=net_mrvl,iface=eth0,iface=eth2 -c 3 -- -i --p 3 -a --disable-hw-vlan-strip
+   ./testpmd --vdev=eth_mvpp2,iface=eth0,iface=eth2 -c 3 -- -i --p 3 -a --disable-hw-vlan-strip
 
 Example #1
 ^^^^^^^^^^
@@ -492,7 +492,7 @@ For additional information about classifier please consult
 Usage Example
 -------------
 
-MRVL PMD requires extra out of tree kernel modules to function properly.
+MVPP2 PMD requires extra out of tree kernel modules to function properly.
 `musdk_uio` and `mv_pp_uio` sources are part of the MUSDK. Please consult
 ``doc/musdk_get_started.txt`` for the detailed build instructions.
 For `mvpp2x_sysfs` please consult ``Documentation/pp22_sysfs.txt`` for the
@@ -515,6 +515,6 @@ In order to run testpmd example application following command can be used:
 
 .. code-block:: console
 
-   ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2 -c 7 -- \
+   ./testpmd --vdev=eth_mvpp2,iface=eth0,iface=eth2 -c 7 -- \
      --burst=128 --txd=2048 --rxd=1024 --rxq=2 --txq=2  --nb-cores=2 \
      -i -a --rss-udp

drivers/net/Makefile

@@ -31,7 +31,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe
 DIRS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += liquidio
 DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
 DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
-DIRS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += mrvl
+DIRS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mvpp2
 DIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += nfp
 DIRS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += null
@@ -59,7 +59,7 @@ ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += vhost
 endif # $(CONFIG_RTE_LIBRTE_VHOST)
 
-ifeq ($(CONFIG_RTE_LIBRTE_MRVL_PMD),y)
+ifeq ($(CONFIG_RTE_LIBRTE_MVPP2_PMD),y)
 ifeq ($(CONFIG_RTE_LIBRTE_CFGFILE),n)
 $(error "RTE_LIBRTE_CFGFILE must be enabled in configuration!")
 endif

drivers/net/mvpp2/Makefile

@@ -14,7 +14,7 @@ endif
 endif
 
 # library name
-LIB = librte_pmd_mrvl.a
+LIB = librte_pmd_mvpp2.a
 
 # library version
 LIBABIVER := 1
@@ -35,8 +35,8 @@ LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_cfgfile
 LDLIBS += -lrte_bus_vdev
 
 # library source files
-SRCS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += mrvl_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mrvl_ethdev.c
-SRCS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += mrvl_qos.c
+SRCS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mrvl_qos.c
-SRCS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += mrvl_flow.c
+SRCS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mrvl_flow.c
 
 include $(RTE_SDK)/mk/rte.lib.mk

drivers/net/mvpp2/mrvl_ethdev.c

@@ -2828,5 +2828,5 @@ static struct rte_vdev_driver pmd_mrvl_drv = {
 	.remove = rte_pmd_mrvl_remove,
 };
 
-RTE_PMD_REGISTER_VDEV(net_mrvl, pmd_mrvl_drv);
+RTE_PMD_REGISTER_VDEV(net_mvpp2, pmd_mrvl_drv);
-RTE_PMD_REGISTER_ALIAS(net_mrvl, eth_mrvl);
+RTE_PMD_REGISTER_ALIAS(net_mvpp2, eth_mvpp2);

mk/rte.app.mk

@@ -164,7 +164,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD)       += -lrte_pmd_mlx5 -ldl
 else
 _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD)       += -lrte_pmd_mlx5 -libverbs -lmlx5
 endif
-_LDLIBS-$(CONFIG_RTE_LIBRTE_MRVL_PMD)       += -lrte_pmd_mrvl -L$(LIBMUSDK_PATH)/lib -lmusdk
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD)      += -lrte_pmd_mvpp2 -L$(LIBMUSDK_PATH)/lib -lmusdk
 _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD)        += -lrte_pmd_nfp
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL)       += -lrte_pmd_null
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP)       += -lrte_pmd_pcap -lpcap