In this patch, we removed the necessity of the version files and
you don't need to update these files for each release, you can just
remove them.
Suggested-by: Ferruh Yigit <ferruh.yigit@amd.com>
Signed-off-by: Abdullah Ömer Yamaç <omer.yamac@ceng.metu.edu.tr>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@amd.com>
Enabled software PMDs in IOVA as PA disabled build
as they work with IOVA as VA.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The vdev bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The poll call can return POLLERR which is ignored, or it can return
POLLOUT, even if there are no free frames in the mmap-ed area.
We can account for both of these cases by re-checking if the next
frame is empty before writing into it.
We have attempted to reproduce this issue with pktgen-dpdk, using the
following configuration.
pktgen -l 1-4 -n 4 --proc-type=primary --no-pci --no-telemetry \
--no-huge -m 512 \
--vdev=net_af_packet0,iface=eth1,blocksz=16384,framesz=8192, \
framecnt=2048,qpairs=1,qdisc_bypass=0 \
-- \
-P \
-T \
-m "3.0" \
-f themes/black-yellow.theme
We configure a low tx rate (~ 335 packets / second) and a small
packet size, of about 300 Bytes from the pktgen CLI.
set 0 size 300
set 0 rate 0.008
set 0 burst 1
start 0
After bringing the interface down, and up again, we seem to arrive
in a state in which the tx rate is inconsistent, and does not recover.
ifconfig eth1 down; sleep 7; ifconfig eth1 up
[1] http://code.dpdk.org/pktgen-dpdk/pktgen-20.11.2/source/INSTALL.md
Fixes: 364e08f2bb ("af_packet: add PMD for AF_PACKET-based virtual devices")
Cc: stable@dpdk.org
Signed-off-by: Mihai Pogonaru <pogonarumihai@gmail.com>
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Driver is using 'ETH_FRAME_LEN' Linux defined value as max frame length,
which doesn't include FCS (4 bytes CRC). But ethdev by default uses
frame size with FCS when application doesn't define any explicit value.
As a result device configuration fails because device is tried to be
configured with a frame size length that is bigger than what device
reported as supported. Device reports as max supported frame size is
1514 but configured value is 1518.
Instead use DPDK macro, 'RTE_ETHER_MAX_LEN', that includes FCS in the
driver to report the max supported frame size, this matches to the
initial intention.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1a ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Some drivers don't need Rx and Tx queue release callback, make them
optional. Clean up empty queue release callbacks for some drivers.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The af_packet pmd driver binds to a raw socket and allows sending and
receiving of packets through the kernel.
Since commit [1], the kernel strips the vlan tags early in
__netif_receive_skb_core(), so we receive untagged packets while running
with the af_packet pmd.
Luckily for us, the skb vlan-related fields are still populated from the
stripped vlan tags, so we end up having all the information that we need
in the mbuf.
Having the pmd driver support DEV_RX_OFFLOAD_VLAN_STRIP allows the
application to control the desired vlan stripping behavior, until we
have a way to describe offloads that can't be disabled by pmd drivers.
This patch will cause a change in the default way that the af_packet pmd
treats received vlan-tagged frames. While previously, the application
was required to check the PKT_RX_VLAN_STRIPPED flag, after this patch,
the pmd will re-insert the vlan tag transparently to the user, unless
the DEV_RX_OFFLOAD_VLAN_STRIP is enabled in rxmode.offloads.
I've attempted a preliminary benchmark to understand if the change could
cause a sizable performance hit.
Setup:
Two virtual machines running on top of an ESXi hypervisor
Tx: DPDK app (running on top of vmxnet3 PMD)
Rx: af_packet (running on top of a kernel vmxnet3 interface)
Packet size :68 (packet contains a vlan tag)
Rates:
Tx - 1.419 Mpps
Rx (without vlan insertion) - 1227636 pps
Rx (with vlan insertion) - 1220081 pps
At a first glance, we don't seem to have a large degradation in terms of
packet rate.
[1]
https://github.com/torvalds/linux/commit/bcc6d47903612c3861201cc3a866fb60
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
We should eliminate the timestamp status from the packet
status. This should only matter if timestamping is enabled
on the socket, but we might hit a kernel bug, which is fixed
in newer releases.
For interfaces of type 'veth', the sent skb is forwarded
to the peer and back into the network stack which timestamps
it on the RX path if timestamping is enabled globally
(which happens if any socket enables timestamping).
When the skb is destructed, tpacket_destruct_skb() is called
and it calls __packet_set_timestamp() which doesn't check
the flags on the socket and returns the timestamp if it is
set in the skb (and for veth it is, as mentioned above).
See the following kernel commit for reference [1]:
net: packetmmap: fix only tx timestamp on request
The packetmmap tx ring should only return timestamps if requested
via setsockopt PACKET_TIMESTAMP, as documented. This allows
compatibility with non-timestamp aware user-space code which checks
tp_status == TP_STATUS_AVAILABLE; not expecting additional timestamp
flags to be set in tp_status.
[1] https://www.spinics.net/lists/kernel/msg3959391.html
Signed-off-by: Mihai Pogonaru <pogonarumihai@gmail.com>
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Some older kernels do not support the PACKET_QDISC_BYPASS socket
option. Such an example is the CentOS 7 kernel (3.10).
If we only check for the definition of PACKET_QDISC_BYPASS, it might mean
that we will not be able to compile the PMD driver on a newer platform,
and run in on a machine with an older kernel.
Setting the socket option only if it is specifically requested from
the EAL arguments, allows us to have a way to run the PMD compiled
against newer kernel headers, on platforms having older kernels.
Signed-off-by: Tudor Cornea <tudor.cornea@keysight.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The log levels are configured by using the name of the logs.
Some drivers are aligned to follow a common log name standard:
pmd.class.driver[.sub]
Some "common" drivers skip the "class" part:
pmd.driver.sub
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The flag RTE_ETH_DEV_CLOSE_REMOVE is set so all port resources
can be freed by rte_eth_dev_close().
Freeing of private port resources is moved
from the ".remove(device)" to the ".dev_close(port)" operation.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add a missing available check and fix the wrong address passed
to munmap on init failure.
Fixes: dd6590fe2f ("af_packet: fix possible memory leak")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add missing code to free memory when the device initialization fails.
Fixes: ccd37d341e ("net/af_packet: remove queue number limitation")
Fixes: 5f19dee604 ("drivers/net: do not use private ethdev data")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Zero is a valid fd. It will fail to check the fd if the fd is zero.
Fixes: 527740ccfa ("af_packet: fix some leaks")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since qpairs is part of the vdev arguments, there is no need to
limit it to 16. The queue arrays can be dynamically sized based
on the requested parameters.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: John W. Linville <linville@tuxdriver.com>
Since packet is talking to a network device (probably tap)
it is possible for the device driver to change the hardware address
by making an ioctl to kernel.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The af_packet pmd already supports MULTI_SEG tx packets, and tx
VLAN_INSERT so advertise these capabilities.
Signed-off-by: Paul Atkins <paul.atkins@intl.att.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When sendto call fails and ENOBUFS/EAGAIN error is being set
some of the packets are actually successfully transmitted.
There is no available count of those packets, so in order to
make the statistics more accurate, all the previously enqueued
packets will be considered successful, even though this is not
entirely correct.
Statistics numbers before this update:
Pktgen:
Total Rx Pkts: 1360084
Tx Pkts: 2000000
testpmd:
RX-packets: 1408346 RX-missed: 0 RX-bytes: 84503418
TX-packets: 526486 TX-errors: 881851 TX-bytes: 31589724
Statistics numbers after this update:
Pktgen:
Total Rx Pkts: 1329872
Tx Pkts: 2000000
testpmd:
RX-packets: 1389156 RX-missed: 0 RX-bytes: 83349360
TX-packets: 1389156 TX-errors: 0 TX-bytes: 83349360
Fixes: 74b7fc0a0f ("net/af_packet: fix packet bytes counting")
Cc: stable@dpdk.org
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
af_packet driver is leaving stale socket after device is removed.
Ring buffers are memory mapped when device is added using rte_dev_probe.
There is no corresponding munmap call when device is removed/closed.
This commit fixes the issue by calling munmap
from rte_pmd_af_packet_remove().
Bugzilla ID: 339
Fixes: e6ee4db01b ("af_packet: make the device detachable")
Cc: stable@dpdk.org
Signed-off-by: Abhishek Sachan <abhishek.sachan@altran.com>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
This Rx counter has never been used.
Fixes: 364e08f2bb ("af_packet: add PMD for AF_PACKET-based virtual devices")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_vdev_driver is declared twice.
The first one is not necessary.
Fixes: 050fe6e9ff ("drivers/net: use ethdev allocation helper for vdev")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Print system error to make easier diagnosis of errors with af_packet.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Kernel validates block size to be aligned to page size. Code works on
platforms with page size 4k, but on others e.g. Arm64 fails with default
parameters.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Transmit errors must not be reported in q_errors[] which is for
reception.
Fixes: 364e08f2bb ("af_packet: add PMD for AF_PACKET-based virtual devices")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
