Current PFC implementation does not support VFs.
This patch enables PFC on VFs too.
Also fix the config of aura.bp to be based on number
of buffers(aura.limit) and corresponding shift
value(aura.shift).
Fixes: cb4bfd6e7b ("event/cnxk: support Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Use computed value for WQE skip instead of a hard-coded value.
WQE skip needs to be number of 128B lines to accommodate rte_mbuf.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Calling this telemetry callback with no argument caused a crash.
Fixes: 41cc645c21 ("net/cnxk: add inline IPsec telemetry for CN9K")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Allow building generic arm64 target using config/arm/arm64_armv8_linux_*
config which works on both cn9k and cn10k by relaxing cache line size
requirements a bit.
While at it move cache line checks to common place.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
The return value of rte_tel_data_alloc() may be null pointer.
Add missing check vs null.
Fixes: 5ea354a1f2 ("net/cnxk: support telemetry")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for per port RQ in inline device thereby using
Aura/Pool attributes from that port specific first RQ.
When inline device is used with channel masking, it will
fallback to single RQ for all ethdev ports.
Also remove clamping up of CQ size for LBK ethdev when
inline inbound is enabled as now backpressure is supported
even on LBK ethdevs.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix hotplug detach sequence to handle case where first PCI
device that is hosting NPA LF is being destroyed while in use.
Fixes: 5a4341c849 ("net/cnxk: add platform specific probe and remove")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix multi-seg extraction in vwqe path to avoid updating mbuf[]
array until it is used via cq0 path.
Fixes: 7fbbc981d5 ("event/cnxk: support vectorized Rx event fast path")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Perform early MTU setup for event mode path in order
to update the Rx/Tx offload flags before Rx adapter setup
starts.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for flow control in outbound inline path using
FC updates from CPT.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enabled rte_security stats operation based on the configuration
of SA options set while creating session.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added supported capabilities for various IPsec SA options.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When the packet is processed with inline IPsec offload,
the ol_flags were updated only with RTE_MBUF_F_RX_SEC_OFFLOAD.
But the hardware can also update the L3/L4 csum offload flags.
Hence, ol_flags are updated with RTE_MBUF_F_RX_IP_CKSUM_GOOD,
RTE_MBUF_F_RX_L4_CKSUM_GOOD, etc based on the microcode completion
codes.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Optimize Rx fast path for security packets by preprocessing
most of the operations such as sa pointer compute,
inner WQE pointer fetch and microcode completion translation
before the pkt is characterized as inbound inline pkt.
Preprocessed info will be discarded if packet is not
found to be security pkt. Also fix fetching of CQ word5
for vector mode. Get ucode completion code from CPT parse
header and RLEN from IP4v/IPv6 decrypted packet as it is
in same 64B cacheline as CPT parse header in most of
the cases. By this method, we avoid accessing an extra
cacheline
Fixes: c062f5726f ("net/cnxk: support IP reassembly")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added support for decrementing TTL(IPv4)/hoplimit(IPv6)
while doing inline IPsec processing if the security session
SA options is enabled with dec_ttl.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The rx offload flag need to be reset if IP reassembly flag
is not set while calling reassembly_conf_set.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Changed environment variable name for specifying
debug IV for unit testing of inline IPsec offload
with known test vectors.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Inline PF_FUNC is updated in ethdev_tel_handle_info(),
when inline device is attached to any dpdk process
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For transport mode, roundup needs to be based on L4 data
and shouldn't include L3 length.
By including L3 length, rlen that is calculated and put in
send hdr would cross the final length of the packet in some
scenarios where padding is necessary.
Also when outer and inner checksum offload flags are enabled,
get the l2_len and l3_len from il3ptr and il4ptr.
Fixes: 55bfac717c ("net/cnxk: support Tx security offload on cn10k")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Disable default inner L3/L4 checksum generation for outbound inline
path and enable based on SA options or RTE_MBUF flags as per
the spec. Though the checksum generation is not impacting much
performance, it is overwriting zero checksum for UDP packets
which is not always good.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add barrier after meta batch free in scalar routine when
LMT lines are exactly full to make sure that next LMT line user
in Tx only starts writing the lines only when previous stoerl's
are complete.
Fixes: 4382a7ccf7 ("net/cnxk: support Rx security offload on cn10k")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update link info of LBK ethdev i.e AF's VF's as always up
and 100G. This is because there is no phy for the LBK interfaces
and driver won't get a link update notification for the same.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support internal loopback mode on AF VF's using ROC by setting
Tx channel same as Rx channel.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The SDP interfaces also need to be configured for NIX receive channel
backpressure for packet receive.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support matching IPv6 fragment extension header
with RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT flow pattern item.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding cnxk device driver support to configure custom SA index.
Custom SA index can be configured as part of the session create
as SPI, and later original SPI can be updated using session update.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding devargs support to parse custom SA action.
Devargs can be specified in the following way.
-a 0002:02:00.0,custom_sa_act=1
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Set the error message with rte_flow_error_set() API
when flow parsing fails.
Fixes: 8c009b4505 ("net/cnxk: support flow API")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Used errata APIs roc_errata_nix_has_no_drop_re() and
roc_errata_nix_has_cq_min_size_4k() instead of direct
ROC model check.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
hot_plug application does not perform any port setup
configuration via rte_eth_dev_configure() API. All the probed
Ethernet ports do not contain any Rx and Tx queues.
While detaching a device via rte_eal_hotplug_remove(), CNXK
driver expects Rx and Tx queues structures populated during
reset of PFC. So application gets crashed as data->rx_queues
and data->tx_queues are NULL.
Fixes: 9544713564 ("net/cnxk: support priority flow control")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added support for RTE_FLOW_ITEM_TYPE_MARK. This item type
can be used to create ingress flow rules to match packets
from CPT's second pass packets.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix the following build error seen with --optimization=1 and
GCC 10.3.0.
drivers/net/cnxk/cnxk_ethdev_mtr.c: In function
‘cnxk_nix_mtr_policy_validate’:
lib/ethdev/rte_mtr_driver.h:188:10: error: ‘str’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/cnxk/cn10k_rx.h:149:2 error: ‘frag_ptr’ may be
used uninitialized in this function
Bugzilla ID: 939
Fixes: b526599020 ("net/cnxk: fix build with GCC 12")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Tested-by: Daxue Gao <daxuex.gao@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
If PF has PTP enabled the data offset should be adjusted for VF to
skip extra 8 bytes of timestamp as the MAC inserts 8 bytes before
the ethernet header.
Fixes: c443e0d326 ("common/cnxk: support NIX PTP")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently inline inbound device usage is not default for eventdev,
patch renames force_inl_dev dev arg to no_inl_dev and enables inline
inbound device by default.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
cnxk platform supports red/yellow packet marking based on TM
configuration. This patch set hooks to enable/disable packet
marking for VLAN DEI, IP DSCP and IP ECN. Marking enabled only
in scalar mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added capability and support for inline inbound IP reassembly
in cnxk driver. The IP reassembly offload is supported only
when the inline IPSec security offload is enabled.
In case of IP reassembly incomplete, the mbufs are attached
in the mbuf dynamic field and a dynamic flag is set accordingly.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Align prefetches for CN10K cache model for vWQE in Rx and Tx.
Move mbuf->next NULL assignment to Tx path and enabled it only
when multi segments offload is enabled to reduce L1 pressure.
Add macros to detect corrupted mbuf->next values when
MEMPOOL_DEBUG is set.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In vWQE mode, the mbuf address is calculated without using the
IOVA list.
Packet length can also be calculated by using NIX_PARSE_S by
which we can completely eliminate reading 2nd cache line
depending on the offloads enabled.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for soft expiry notification mechanism in outbound
path by creating required number of ring buffers and a common poll
thread which polls for soft expiry events enqueued by microcode.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Remove unused files that were left over after Rx and Tx template
function rework.
Fixes: 5169508a68 ("net/cnxk: add cn9k template Rx functions to build")
Fixes: dd8c20eee4 ("net/cnxk: add cn9k template Tx functions to build")
Fixes: be294749a1 ("net/cnxk: add cn10k template Rx functions to build")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
RSS reta table is corrupted during rte_eth_dev_rss_reta_update().
Fix it by restoring previous table entries before updating.
Fixes: 00242a687d ("net/cnxk: support RETA and RSS hash")
Cc: stable@dpdk.org
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Timestamp resolution for an incoming and outgoing packets
is different for CN10k and CN9K. Added SoC specific
callback to retrieve timestamp in correct format
when read by application.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Resolve following compilation error with gcc 12 version.
error: storing the address of local variable message in *error.message
Fixes: 26b034f78c ("net/cnxk: support to validate meter policy")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add option to override outbound inline SA IV for debug
purposes via environment variable. User can set env variable as:
export CN10K_ETH_SEC_IV_OVR="0x0, 0x0,..."
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for inline inbound SPI range via devargs
instead of just max SPI value and range being 0..max.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enable flow control by default on device configuration
instead of basing it on Kernel behaviour.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enable packet pool tail drop on RQ when inbound security is not
enabled. This is only part of the configuration. It is a NOP if
tail drop is not enabled on NPA_AURA_CTX_S. And tail drop
on packet pool AURA is enabled only when that packet pool aura
is used by inline device RQ.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently meta buffers are freed in bursts of one LMT line
i.e 15 pointers. Instead free them in bursts of 16 LMTlines
which is 240 ptrs for better perf.
Also mark mempool objects as get and put in missing places.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use raw mbuf free on inline security error to simulate
HW NPA free instead of doing rte_pktmbuf_free(). This
is needed as the callback will not be called from
DPDK lcore.
Fixes: 69daa9e502 ("net/cnxk: support inline security setup for cn10k")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Realloc inline dev XAQ when Rx/Tx security ie enabled with
new packet pool as XAQ should be large enough to hold all
mbufs if inline outbound reports error or all mbufs.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Register callback early to handle initial error packets from
inline device.
Fixes: 69daa9e502 ("net/cnxk: support inline security setup for cn10k")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix inline device RQ tagmask to get packets with receive errors
as type ETHDEV packets to callback handler so that packet buffers
can get freed. Currently only IPsec denied packets get the right
tag mask.
Fixes: ee48f711f3 ("common/cnxk: support NIX inline inbound and outbound setup")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added rx_metadata_negotiate API to enable mark update RX offload.
Removed software logic to enable/disable mark update inside flow
create/destroy APIs.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use common SA init API before doing initialization based on
params. This is better so that all HW specific default values
are at single place for lookaside and inline.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update the inline device functions to work when roc_nix is NULL.
This is required, as IPsec driver have to use these APIs to work
with inline IPsec device, but the IPsec driver might not have roc_nix
information.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support for priority flow control support for CNXK
platforms.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Except for the cn*_rte_flow* files, none of the other
file has rte in the file name, remove the
rte to unify the file name across the directory.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Kiran Kumar K <kirankumark@marvell.com>
Adding changes to enable keep flow rule device capability.
With this change, flow rules will be kept across device restart.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Fix uninitialized local variable as reported by coverity scan.
Coverity issue: 373630
Fixes: 6af19a9d89 ("net/cnxk: support meter action to flow destroy")
Cc: stable@dpdk.org
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds telemetry function to get information about inline
outbound and inline inbound SA's. The function takes port id
as input. Some fields in the structures roc_ot_ipsec_outb_sa
and roc_ot_ipsec_inb_sa are returned as output.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Adds telemetry function to get information about inline
outbound and inline inbound SA's. The function takes port id
as input. Some fields in the structures roc_onf_ipsec_outb_sa
and roc_onf_ipsec_inb_sa are returned as output.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
When Rx/Tx functions are updated such as in a rte flow
rule creation with VLAN stripping or marking action,
update the fastpath ops table as well.
Fixes: b951c2efcb ("net/cnxk: add Rx burst for CN9K")
Fixes: f742a9a668 ("net/cnxk: add Rx burst for CN10K")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
If multi-segment is enabled and single segment/packet
is received, then mbuf data_len is not updated in
cn9k_nix_cqe_to_mbuf() function.
Also, in case of timestamp is enabled, mbuf data_len
and pkt_len will be updated for all packets including
multi segmented packets.
Fixes: 7c6bee3406 ("net/cnxk: enable PTP processing in vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Improve vWQE and CQ Rx performance by tuning perfetches to 64B
cacheline size.
Also, prefetch the vWQE array offsets at cacheline boundaries.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Store and reuse workslot status for TT, GRP and HEAD status
instead of reading from GWC as reading from GWC imposes
additional latency.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Multiple PMDs have dummy/noop Rx/Tx packet burst functions.
These dummy functions are very simple, introduce a common function in
the ethdev and update drivers to use it instead of each driver having
its own functions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Tx command is prepared based on offloads enabled and stored in
Tx queue structure at tx_queue_setup phase.
In fastpath the command is copied from Tx queue to LMT line for
all the packets.
Since, the command contents are mostly constants we can move the
command preparation to fastpath and avoid accessing Tx queue
memory.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add cn10k segregated Rx and event Tx enqueue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn10k segregated Rx and event dequeue functions to build,
add macros to make future modifications simpler.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn10k segregated Rx and event dequeue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn9k segregated Tx and event Tx functions to build,
add macros to make future modifications simpler.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn9k segregated Rx and event Tx enqueue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn9k segregated Rx and event dequeue functions to build,
add macros to make future modifications simpler.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Split template functions to multiple files based on the range
of offloads. This allows them to be built in parallel reducing
time spent on compiling single files containing all the template
functions.
The files are added to the build system in later patches modifying
the existing scheme of selecting template lookup with a simple
flat array based lookup.
Add cn9k segregated Rx and event dequeue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Synchronize inline session create and destroy using spinlock.
Also move security related error prints outside the spinlock.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Improve inbound inline error handling for CN9K in terms of
packet delivered to application for different kinds of errors.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding changes to configure switch header type pre_l2 for cnxk.
pre_l2 headers are custom headers placed before the ethernet
header. Along with switch header type, user needs to provide the
offset within the custom header that holds the size of the
custom header and mask for the size within the size offset.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Patch updates configured meter BPF (Bandwidth profile) ID is in
receive queue context during meter creation.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Provides ethdev callback support of rx_queue_count,
rx_descriptor_status and tx_descriptor_status.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When multicast promiscuous was being enabled it caused the unicast
promiscuous to be disabled. This fix resolves this by setting
NIX_RX_MODE_PROMISC when eth_dev->data->promiscuous is set, regardless.
Fixes: 325d79c00a ("net/cnxk: support all multicast")
Cc: stable@dpdk.org
Signed-off-by: Asaf Ravid <aravid@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules on SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Bandwidth profile count is updated in meter capabilities during device
initialization using mbox interface.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Disable drop_re i.e dropping packets with receive errors on
vector enable for few cn10k revisions due to HW errata.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Allow flow control on LBK VF's and enable TM to listen on
backpressure when Rx pause is enabled.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support to write CPT CTX through microcode op(SET_CTX/WRITE_SA)
for cn10k inline mode.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enable TM topology to listen on backpressure received when
Rx pause frame is enabled. Only one TM node in Tl3/TL2 per
channel can listen on backpressure on that channel.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced. Explicitly reset it in all PMDs
supporting rte_flow API in order to attract the attention
of maintainers, who should eventually choose to advertise
the new capability or not. It is already known that
mlx4 and mlx5 will not support this capability.
For RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP
similar action is not performed,
because no PMD except mlx5 supports indirect actions.
Any PMD that starts doing so will anyway have to consider
all relevant API, including this capability.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
