In this patch, we removed the necessity of the version files and
you don't need to update these files for each release, you can just
remove them.
Suggested-by: Ferruh Yigit <ferruh.yigit@amd.com>
Signed-off-by: Abdullah Ömer Yamaç <omer.yamac@ceng.metu.edu.tr>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@amd.com>
Currently, the defined error handling modes include:
1) NONE: it means no error handling modes are supported by this port.
2) PASSIVE: passive error handling, after the PMD detect that a reset
is required, the PMD reports RTE_ETH_EVENT_INTR_RESET event, and
application invoke rte_eth_dev_reset() to recover the port.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Make rte_driver opaque for non internal users.
This will make extending this object possible without breaking the ABI.
Introduce a new driver header and move rte_driver definition.
Update drivers and library to use the internal header.
Some applications may have been dereferencing rte_driver objects, mark
this object's accessors as stable.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
The pci bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced. Explicitly reset it in all PMDs
supporting rte_flow API in order to attract the attention
of maintainers, who should eventually choose to advertise
the new capability or not. It is already known that
mlx4 and mlx5 will not support this capability.
For RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP
similar action is not performed,
because no PMD except mlx5 supports indirect actions.
Any PMD that starts doing so will anyway have to consider
all relevant API, including this capability.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1a ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
After DEV_RX_OFFLOAD_JUMBO_FRAME flag removed, drivers give jumbo frame
decisions based on MTU value checks, but some of the checks were wrong
by mistake, causing device initialization to fail, fixing them.
Fixes: b563c14212 ("ethdev: remove jumbo offload flag")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
This patch enables building the e1000 driver for Windows.
I tested using two Windows VM on top of VMware Fusion,
creating two e1000 devices with device ID 0x10D3 (8274L),
verifying rx/tx works correctly using dpdk-testpmd.exe
rxonly and txonly mode.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move requested MTU value check to the API to prevent the duplicated
code.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
rte_eth_rx_descriptor_status() should be used as a replacement.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Normally when closing the device the queue memzone should be
freed. But the memzone will be not freed, when device setup
ops like:
rte_eth_bond_slave_remove
-->__eth_bond_slave_remove_lock_free
---->slave_remove
------>rte_eth_dev_internal_reset
-------->rte_eth_dev_rx_queue_config
---------->eth_dev_rx_queue_config
------------>em_rx_queue_release
rte_eth_dev_close
-->eth_em_close
---->em_dev_free_queues
------>em_rx_queue_release
(not been called due to nb_rx_queues and nb_tx_queues are 0)
And when queue number is changed to small size, the BIG memzone
queue index will be lost. This will lead to a memory leak. So we
should release the memzone when releasing queues.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adjust parameters order to eth_xstats_get_by_id_t prototype.
Make ids the second parameter similar to eth_xstats_get_by_id_t.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since meson 0.59.0 version, the extract_all_objects() API
need to pass explicit boolean value.
To remove the following warning[1], added explicit `true` for
extract_all_objects() use in codebase whever there is
no argument.
[1]
WARNING: extract_all_objects called without setting recursive
keyword argument. Meson currently defaults to
non-recursive to maintain backward compatibility but
the default will be changed in the future.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch fixes parameter misuse when set rte flow action error.
Fixes: c0688ef1ed ("net/igb: parse flow API n-tuple filter")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This fixes the timed out for shadow RAM write EEWR can't be detected.
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
According to E1000_ETH_OVERHEAD definition, max_rx_pkt_len contains
one VLAN tag size. Therefore when config RLPML register, if dual VLAN
not enabled there is no need to add VLAN tag size to max_rx_pkt_len,
otherwise only one another VLAN tag size should be added to.
Fixes: e51abef393 ("igb: fix max RX packet size and support dual VLAN")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Tested-by: Lingli Chen <linglix.chen@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The validity verification of input parameters should be performed at
API layer, not in the PMD.
Fixes: 3a18c44b45 ("ethdev: add access to EEPROM")
Fixes: 40ff8b305a ("net/e1000: add module EEPROM callbacks for e1000")
Fixes: f2088e785c ("net/i40e: fix dereference before check when getting EEPROM")
Fixes: b74d0cd43e ("net/ixgbe: add module EEPROM callbacks for ixgbe")
Fixes: 8a6a09f853 ("net/mlx5: support reading module EEPROM data")
Fixes: 58f6f93c34 ("net/octeontx2: add module EEPROM dump")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the size of a packet in Rx channel is less than the minimum
or greater than the maximum, the packet will be simultaneously
counted by RLEC(Receive Length Error Count) and
RUC(Receive Under Size Count)/ROC(Receive Oversize Count) registers.
This patch fixes the issue of counting a length error packet twice
when counting the total number of received error packets.
Fixes: 70bdb18657 ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
When compiled as a shared object, and loaded at runtime as a plugin,
the drivers should get the log level set earlier at EAL init
by the user through --log-level option.
The function for applying the log level setting is
rte_log_register_type_and_pick_level().
It is called by most drivers via RTE_LOG_REGISTER().
The drivers common/mlx5, bcmfs and e1000 were missing,
so the user-specified log level was not applied when
those drivers were loaded as plugins.
The macro RTE_LOG_REGISTER() is used for those drivers.
The unnecessary protection for double registration
is removed from e1000.
Fixes: 9c99878aa1 ("log: introduce logtype register macro")
Fixes: c8e79da7c6 ("crypto/bcmfs: introduce BCMFS driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.
This patch allows setting this special MTU when device is stopped,
because scattered_rx will be re-configured during next port start
and driver may enable scattered receive according new MTU value.
After this patch, driver may select different receive function
automatically after MTU set, according MTU values selected.
Fixes: 59d0ecdbf0 ("ethdev: MTU accessors")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
E1000_CTRL register should be updated according to fc_conf->mode's
value.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: ef990fb56e ("net/e1000: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Allows i40e and mlx5 PMDs to compile on Windows and disable other drivers.
Disable few i40e warnings with Clang such as comparison of integers of
different signs and macro redefinitions.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
net/e1000 driver is the only user of the struct rte_eth_flex_filter
and helper defines. Move it to the driver and use igb_ prefix
instead of rte_eth_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FLEXIBLE filter RTE flow API should be used.
Temporarily preserve helper defines in public interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
