DMA on SN1022 SoC requires extra mapping of the memory via MCDI.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Datapath queue is either Rx or Tx, so just one counter is sufficient
for doorbells. It can count Tx doorbells in the case of Tx queue and
Rx doorbells in the case of Rx queue.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Rx/Tx doorbells statistics are collected in software and
available per queue. These stats are useful for performance
investigation.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The mbuf header files had some commenting style errors that affected the
API documentation.
Also, the RTE_ prefix was missing on a macro and a definition.
Note: This patch does not touch the offload and attachment flags that are
also missing the RTE_ prefix.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The config options CONFIG_RTE_* are simple RTE_* defines with meson.
Now that make support is dropped, update the names in logs and comments.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Riverhead FW supports Rx prefix choice based on required fields in Rx
prefix. The feature is generalized in libefx to provide Rx prefixes
layout for other NICs and firmware variants. Now driver can get
the prefix layout after Rx queue start and use the layout details to
check its expectations or simply in run-time.
Rx prefix choice and query interface is defined in SF-119689-TC
EF100 host interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Avoid build failures on further restructuring.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Defines and functions from rte_mbuf_ptype.h are not used.
Only libefx types and EF10 register definitions are used.
Native datapaths should be independent from main libefx interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx datapath feature bits were useful on migration from the old offload API
to the new one. However, right now it just adds indirection which
complicates code reading and understanding. Also addition of a new
offloads requires addition of a new feature bits and makes patches longer
and harder to understand. So, remove feature bits which correspond to Rx
offloads and simply advertise device and per-queue offloads directly.
Generic code could still mask some offloads if running HW or FW does not
support it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Descriptor limits are not common for all NIC families. Use the variables
from NIC configuration instead of deprecated defines.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Descriptor limits are not common for all NIC families. Use the variables
from NIC configuration instead of deprecated defines.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
mbuf raw free adds debug build checks to ensure that mbuf is
really OK to be returned to mempool.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Implement EF10 ESSB Rx datapath callback to get number of pending
descriptors.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Number of buffers left in completed descriptor may be 0. If so,
all buffers of the descriptor are freed once again.
Fixes: 390f9b8d82 ("net/sfc: support equal stride super-buffer Rx mode")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Rx descriptor status callback was lost and request of the Rx
descriptor status crashes application if equal stride super-buffer
Rx mode is used.
Fixes: 390f9b8d82 ("net/sfc: support equal stride super-buffer Rx mode")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Number of descriptors in equal stride super-buffer Rx mode defines
number of packet buffers to be used. Each HW Rx descriptor has
many packet buffers and the number depends on total size of mbuf
and CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB value.
Typically it makes a bit less than 32 buffers per descriptor.
Since HW Rx descriptors must be pushed by 8, it makes about 256
as required minimum. Double it in advertised minimum to allow for
at least 2 refill blocks.
Fixes: 390f9b8d82 ("net/sfc: support equal stride super-buffer Rx mode")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Equal stride super-buffer Rx mode allows to mark packets in HW
using filters. Process the data on datapath and advertise
corresponding features to allow flow API support to implement it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Equal stride super-buffer requires mempool with contiguous object
block allocation mechanism. Bucket mempool is the only which provides it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
HW Rx descriptor represents many contiguous packet buffers which
follow each other. Number of buffers, stride and maximum DMA
length are setup-time configurable per Rx queue based on provided
mempool. The mempool must support contiguous block allocation and
get info API to retrieve number of objects in the block.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
