Add new get/set API to allow the user or application to set the minimum
and maximum frequencies to use when scaling.
Previously, the frequency range was determined by the HW capabilities of
the CPU. With this new API, the user or application can constrain this
if required.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Add new get/set API for configuring 'pause_duration' which used to adjust
the pause mode callback duration.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Add new get/set APIs to configure emptypoll max which is used to
determine when a queue can go into sleep state.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Tested-by: David Hunt <david.hunt@intel.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix spelling errors in comments including doxygen found using codespell.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Following the previous fix, there is nothing using the ppi counter.
We can remove the related ppi_av array in struct priority_worker.
This allows us to also remove num_dequeue_pkts_prev and pc from
struct priority_worker since they are only used in conjunction
with the ppi_av array.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
clang-13 rightfully complains that the tot_ppi variable in update_stats
is set but not used, since the final accumulated tot_ppi results isn't
used anywhere.
Fixes: 450f079131 ("power: add traffic pattern aware power control")
Cc: stable@dpdk.org
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since some vdevs like virtio and vhost do not support rxq_info_get and
queue state inquiry, the error return value -ENOTSUP need to be ignored
when queue_stopped cannot get rx queue information and rx queue state.
This patch changes the return value of queue_stopped when
rte_eth_rx_queue_info_get return -ENOTSUP to support vdevs which cannot
provide rx queue information and rx queue state enable power management.
Fixes: 209fd58545 ("power: make ethdev power management thread unsafe")
Cc: stable@dpdk.org
Signed-off-by: Miao Li <miao.li@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Rather than maintaining a separate list of libraries which are to be
built on windows, use the standard library list and explicitly add to
each library that is not to be built a check for windows and disable
the library at that per-lib level. As well as shortening the main
lib/meson.build file, this also leads to the build summary at the end of
the meson config run correctly listing the libraries which are not to be
built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The private headers are compiled internally with a C compiler.
Thus extern "C" declaration is useless in such files.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The freqs array size is RTE_MAX_LCORE_FREQS. Before filling the
array with num_freqs elements, restrict the total num to
RTE_MAX_LCORE_FREQS. This fix aims to fix the coverity scan issue
like:
Overrunning array "pi->freqs" of 256 bytes by passing it to a
function which accesses it at byte offset 464.
Coverity issue: 371913
Fixes: ef1cc88f18 ("power: support cppc_cpufreq driver")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently in scale mode, multi-queue initialization will attempt to
initialize and de-initialize the per-lcore power library structures
multiple times. Fix it to only do this whenever we either enabling
first queue or disabling last queue.
Fixes: 5dff9a72b0 ("power: support callbacks for multiple Rx queues")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Currently, the error paths can lead to attempts at dereferencing NULL
pointers. Add the check to avoid attempts at dereferencing NULL
pointers.
Coverity issue: 371895
Coverity issue: 371889
Fixes: 06cffd468f ("power: refactor ACPI and intel_pstate support")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Use the new multi-monitor intrinsic to allow monitoring multiple ethdev
Rx queues while entering the energy efficient power state. The multi
version will be used unconditionally if supported, and the UMWAIT one
will only be used when multi-monitor is not supported by the hardware.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Currently, there is a hard limitation on the PMD power management
support that only allows it to support a single queue per lcore. This is
not ideal as most DPDK use cases will poll multiple queues per core.
The PMD power management mechanism relies on ethdev Rx callbacks, so it
is very difficult to implement such support because callbacks are
effectively stateless and have no visibility into what the other ethdev
devices are doing. This places limitations on what we can do within the
framework of Rx callbacks, but the basics of this implementation are as
follows:
- Replace per-queue structures with per-lcore ones, so that any device
polled from the same lcore can share data
- Any queue that is going to be polled from a specific lcore has to be
added to the list of queues to poll, so that the callback is aware of
other queues being polled by the same lcore
- Both the empty poll counter and the actual power saving mechanism is
shared between all queues polled on a particular lcore, and is only
activated when all queues in the list were polled and were determined
to have no traffic.
- The limitation on UMWAIT-based polling is not removed because UMWAIT
is incapable of monitoring more than one address.
Also, while we're at it, update and improve the docs.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Currently, we expect that only one callback can be active at any given
moment, for a particular queue configuration, which is relatively easy
to implement in a thread-safe way. However, we're about to add support
for multiple queues per lcore, which will greatly increase the
possibility of various race conditions.
We could have used something like an RCU for this use case, but absent
of a pressing need for thread safety we'll go the easy way and just
mandate that the API's are to be called when all affected ports are
stopped, and document this limitation. This greatly simplifies the
`rte_power_monitor`-related code.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Currently in DPDK only acpi_cpufreq and pstate_cpufreq drivers are
supported, which are both not available on arm64 platforms. Add
support for cppc_cpufreq driver which works on most arm64 platforms.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently, ACPI and PSTATE modes have lots of code duplication,
confusing logic, and a bunch of other issues that can, and have, led to
various bugs and resource leaks.
This commit factors out the common parts of sysfs reading/writing for
ACPI and PSTATE drivers.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Currently, ACPI code uses rte_power_info as the struct name, which
gives the appearance that this is an externally visible API. Fix to
use internal namespace.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In function power_guest_channel_read_msg, 'lcore_id' is used before
validity check, which may cause buffer 'global_fds' accessed by index
'lcore_id' overflow.
This patch moves the validity check of 'lcore_id' before the 'lcore_id'
being used for the first time.
Fixes: 9dc843eb27 ("power: extend guest channel API for reading")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently, when we set the acpi governor to "userspace", we check if
it is already set to this value, and if it is, we skip setting it.
However, we never save this value anywhere, so that next time we come
back and request the governor to be set to its original value, the
original value is empty.
Fix it by saving the original pstate governor first. While we're at it,
replace `strlcpy` with `rte_strscpy`.
Fixes: 445c6528b5 ("power: common interface for guest and host")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
