Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for multiple queue pairs, when there are
more logical cores available than crypto devices enabled.
For instance, if there are 4 cores available and
2 crypto devices, each device will have two queue pairs.
This is useful to have multiple logical cores using
a single crypto device, without needing to initialize
a crypto device per core.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When running the verify test, mbufs in the pool were
populated with the test vector loaded from a file.
To avoid limiting the number of operations to the pool size,
mbufs will be rewritten with the test vector, before
linking them to the crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of parsing number of segments, from the command line,
parse segment size, as it is a more usual case to have
the segment size fixed and then different packet sizes
will require different number of segments.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When using DES-CBC, packet size has to be multiple
of 8 bytes, but if a list of packets is provided.
the check was not correct.
Fixes: fc4600fb25 ("app/crypto-perf: add extra option checks")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
This patch adds a new benchmarking mode, which is intended for
microbenchmarking individual parts of the cryptodev framework,
specifically crypto ops alloc-build-free, cryptodev PMD enqueue
and cryptodev PMD dequeue.
It works by first benchmarking crypto operation alloc-build-free
loop (no enqueues/dequeues happening), and then benchmarking
enqueue and dequeue separately, by first completely filling up the
TX queue, and then completely draining the RX queue.
Results are shown as cycle counts per alloc/build/free, PMD enqueue
and PMD dequeue.
One new test mode is added: "pmd-cyclecount"
(called with --ptest=pmd-cyclecount)
New command-line argument is also added:
--pmd-cyclecount-delay-ms: this is a pmd-cyclecount-specific parameter
that controls the delay between enqueue and dequeue. This is
useful for benchmarking hardware acceleration, as hardware may
not be able to keep up with enqueued packets. This parameter
can be increased if there are large amounts of dequeue
retries.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter makes number of cryptodev descriptors adjustable
and defaults to earlier hardcoded default of 2048.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since there is a new operation type (AEAD), add parameters
for this in the application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AES-GMAC is an authentication algorithm, based on AES-GCM
without encryption. To simplify its usage, now it can be used
setting the authentication parameters, without requiring
to concatenate a ciphering transform.
Therefore, it is not required to set AAD, but authentication
data length and offset, giving the user the option
to have Scatter-Gather List in the input buffer,
as long as the driver supports it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Authentication algorithms, such as AES-GMAC or the wireless
algorithms (like SNOW3G) use IV, like cipher algorithms.
So far, AES-GMAC has used the IV from the cipher structure,
and the wireless algorithms have used the AAD field,
which is not technically correct.
Therefore, authentication IV parameters have been added,
so API is more correct. Like cipher IV, auth IV is expected
to be copied after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
When using the verify test, test name is necessary
to be passed when digest is needed.
Also, when using an block cipher algorithm (CBC, ECB),
the buffer size has to be aligned to the block size.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
So far, the crypto performance application was only able to
test one buffer size and one burst size.
With this commit, multiple sizes can be passed, either as a range
of values or as a list of values.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
In order to simplify throughput and latency tests,
verify option has been removed from these and moved
as a separate test.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cyclecount test was not implemented, so it is removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When somebody use bad --optype with aead algorithms
segmentation fault could happen.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Instead of going through the array of supported algorithms
in the app, to get the algorithm enum, use the new API in
cryptodev to parse this string, so it is not necessary to add
a new supported algorithm in the cryptodev library and this app.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Added total_ops value validation in parse_total_ops() function.
Coverity issue: 141070
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit fixes the case where the string buffer may not have
a null terminator if the source string's length is equal to the
buffer size.
Coverity issue: 141069
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Aleksander Gajewski <aleksanderx.gajewski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patchset introduce new application which allows measuring
performance parameters of PMDs available in crypto tree. The goal of
this application is to replace existing performance tests in app/test.
Parameters available are: throughput (--ptest throughput) and latency
(--ptest latency). User can use multiply cores to run tests on but only
one type of crypto PMD can be measured during single application
execution. Cipher parameters, type of device, type of operation and
chain mode have to be specified in the command line as application
parameters. These parameters are checked using device capabilities
structure.
Couple of new library functions in librte_cryptodev are introduced for
application use.
To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set
(it is set by default).
Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 --
--ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth
--cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo
sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12
--total-ops 10000000 --burst-sz 32 --buffer-sz 64
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
