Commits for bbdev and security libraries are merged
into the Next Crypto subtree.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Claim maintainership of all areas of EAL memory init, including
OS-specific parts of it.
Also, claim maintainership of fbarray, since although it's not
related to memory allocation, it is heavily used by it and its
primary purpose is to serve memory allocation functions, and
thus will appear under "memory allocation" banner.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Jacek will no longer be maintaining mvpp2 net PMD.
Special thanks to him for his development and support.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends which are in
different VMs, so each VF needs to have its own DMA address translation
service. During the driver probe a new container is created, with this
container vDPA driver can program DMA remapping table with the VM's memory
region information.
Key vDPA driver ops implemented:
- ifcvf_dev_config:
Enable VF data path with virtio information provided by vhost lib,
including IOMMU programming to enable VF DMA to VM's memory, VFIO
interrupt setup to route HW interrupt to virtio driver, create notify
relay thread to translate virtio driver's kick to a MMIO write onto HW,
HW queues configuration.
- ifcvf_dev_close:
Revoke all the setup in ifcvf_dev_config.
Live migration feature is supported by IFCVF and this driver enables
it. For the dirty page logging, VF helps to log for packet buffer write,
driver helps to make the used ring as dirty when device stops.
Because vDPA driver needs to set up MSI-X vector to interrupt the
guest, only vfio-pci is supported currently.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This commit removes the experimental tags from the
service cores functions, they now become part of the
main DPDK API/ABI.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The current test will not be compatible anymore with a private
devargs list.
Moreover, the new functions should have new tests, while the existing
API will be removed.
The current unit tests are thus obsolete and hereby removed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Jacek will no longer be maintaining mrvl crypto PMD.
Special thanks to him for development and support.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Fix logical/alphabetical ordering, spacing, and syntax typo.
Fixes: 8fb3b25760 ("maintainers: call out subtree committers")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
On Octeontx HW, each event timer device is enumerated as separate SRIOV VF
PCIe device.
In order to expose as a event timer device:
On PCIe probe, the driver stores the information associated with the
PCIe device and later when application requests for a event timer device
through `rte_event_timer_adapter_create` the driver infrastructure creates
the timer adapter with earlier probed PCIe VF devices.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Event devices can be coupled with various components to provide
new event sources by using event adapters. The event timer adapter
is one such adapter; it bridges event devices and timer mechanisms.
This library extends the event-driven programming model by
introducing a new type of event that represents a timer expiration,
and it provides APIs with which adapters can be created or destroyed
and event timers can be armed and canceled.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds vhost_crypto sample application to DPDK.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The MAINTAINERS file contains information of the maintainers
of the different components on DPDK.
However, it does not give any information on who maintains the
different subtrees which accept new commits for these components.
This commit adds a list of the subtree committers.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch moves the kernel modules code from EAL to a common place.
- Separate the kernel module code from user space code.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
I will not be directly working on the DPDK project anymore.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The drivers directory contains some sub-directories
for each kind of device (or bus, mem):
net, crypto, event, raw
They are not suffixed with "dev" because it is obvious.
For consistency, the sub-directory drivers/bbdev/
is renamed to drivers/baseband/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
All other apps in the app folder use "-" rather than "_" to separate words
in the app name, so rename proc_info to be consistent.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
I wrote pmdinfogen initially, and since there isn't a maintainer for it,
I'll volunteer to take care of it
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Skeleton rawdevice test cases are part of driver layer. This patch
allows test cases to be executed using 'rawdev_autotest' command
in test framework.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Skeleton rawdevice driver, on the lines of eventdev skeleton, is for
showcasing the rawdev library. This driver implements some of the
operations of the library based on which a test module can be
developed.
Design of skeleton involves a virtual device which is plugged into
VDEV bus on initialization.
Also, enable compilation of rawdev skeleton driver.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With the introduction of bus drivers, we now have a situation where
driver libraries will start to depend upon each other. Because of this,
the driver libs need to be discoverable by the dynamic loader.
There are three options to fix this:
1. Force the user to put the $libdir/dpdk/drivers folder into their
library path.
2. Move all libraries from drivers sub-directory to $libdir.
3. Symlink all libraries from the subfolder to the main library dir.
Option 1 is not great for usability or distro packaging, and option 2
means that we can't have EAL load all drivers from a known path
automatically (as it would error out on non-PMD libs), so option 3 was
chosen as the best fix. The only downside is that on a "ninja uninstall"
the symlinks are not removed, as they are unknown to meson/ninja.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Support compiling the FreeBSD kernel modules using meson and ninja.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the buildtools folder, and more specifically the pmdinfogen binary to
the meson and ninja build. This will be needed for building the PMDs in the
driver folder later, as the pmd info output from the tool needs to be
included in those libs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
To build with meson and ninja, we need some initial infrastructure in
place. The build files for meson always need to be called "meson.build",
and options get placed in meson_options.txt
This commit adds a top-level meson.build file, which sets up the global
variables for tracking drivers, libraries, etc., and then includes other
build files, before finishing by writing the global build configuration
header file and a DPDK pkgconfig file at the end, using some of those same
globals.
From the top level build file, the only include file thus far is for the
config folder, which does some other setup of global configuration
parameters, including pulling in architecture specific parameters from an
architectural subdirectory. A number of configuration build options are
provided for the project to tune a number of global variables which will be
used later e.g. max numa nodes, max cores, etc. These settings all make
their way to the global build config header "rte_build_config.h". There is
also a file "rte_config.h", which includes "rte_build_config.h", and this
file is meant to hold other build-time values which are present in our
current static build configuration but are not normally meant for
user-configuration. Ideally, over time, the values placed here should be
moved to the individual libraries or drivers which want those values.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This tools reads the given version map for a directory, and checks to
ensure that, for each symbol listed in the export list, the corresponding
definition is tagged as __rte_experimental, erroring out if its not. In this
way, we can ensure that the EXPERIMENTAL api is kept in sync with the tags
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Simple functional test for rte_smp_mb() implementations.
Also when executed on a single lcore could be used as rough
estimation how many cycles particular implementation of rte_smp_mb()
might take.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This commit provides a set of tests for verifying the correctness and
performance of both unsigned 32 and 64bit reciprocal based division.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
