The function eth_dev_vhost_create() could return errors,
the return value need to be checked.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Currently there are a couple of limitations on the logging system: Most
of the logs are compiled out and both datapath and controlpath logs
share the same loglevel.
This patch tries to help fix that situation by:
- Splitting control plane and data plane logs
- Making control plane logs dynamic while keeping data plane logs
compiled out by default for log levels lower than the INFO.
As a result, two macros are introduced:
- VHOST_LOG_CONFIG(LEVEL, ...): Config path logging. Level can be
dynamically controlled by "lib.vhost.config"
- VHOST_LOG_DATA(LEVEL, ...): Data path logging. Level can be
dynamically controlled by "lib.vhost.data". Every log macro with a
level lower than RTE_LOG_DP_LEVEL (which defaults to RTE_LOG_INFO)
will be compiled out.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Function kick_tx() has built-in detection on NEED_WAKEUP flag, so just
call it directly, like elsewhere in the driver.
Fixes: d8a210774e ("net/af_xdp: support unaligned umem chunks")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Implements eth dev ops xstats_get, xstats_reset, xstats_get_names,
xstats_get_names_by_id, xstats_get_by_id
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Allow the data in the first buffer to be shifted by `pkt_offset` after
the header room. The offset value is provided by `ena_rx_ctx`.
As part of this update, the version of the ENA was upgraded to v2.0.3.
Signed-off-by: Maciej Bielski <mba@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
This version of the HAL allows to use the latest HW features, like
rx offsets.
Driver was adjusted to the new version to fix the build.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Signed-off-by: Maciej Bielski <mba@semihalf.com>
I volunteer to be co-maintainer for the rte_flow lib.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for 1/10G devices.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
ice_add_mac_rule allow user to add rule to port based on
hw->port_info->lport number. Function in some case should
allow user to add filter rule on different port, write
another function which implemented that behaviour.
The same situation is which removing mac function.
Add new API function which allow user to choose port on which
rule going to be added. Leave add mac rule function that always
add rule on hw->port_info->lport to avoid changes in components
which don't need to choose different port. Also add function to
remove rule from specific port.
Alloc more switch_info structs to track separately rules for each
port. Choose switch_info struct basing on logic port number
because in FW added rules are connected with port.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Change internal implementation of how FD filter programming desc
is prepared. This is to minimize the amount of code needed to prep
the FD filter programming desc (avoid memcpy, etc...) and just use
predefined shifts and mask. This type of change are needed to expedite
FD setup during data path (ADQ uses this codepath during initial
flow setup) and it will also be useful when adding side-band
flow-director filter.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Increase the maximum time that the driver will wait for a PF reset
from 200 milliseconds to 300 milliseconds, to account for possibility
of a slightly longer than expected PF reset.
Fixes: 453d087cca ("net/ice/base: add common functions")
Cc: stable@dpdk.org
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In ice_prot_type_to_id routine, correct the loop limit check
to use ARRAY_SIZE instead of looking for the array element to
have a specific value.
Fixes: fed0c5ca5f ("net/ice/base: support programming a new switch recipe")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Enable the code to clear the HW tables.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Change the extraction sequence generated by flow director flexbytes to
use package mac protocol. Without this change data in packet headers
cannot be used for flexbyte matching. The old extraction for flex bytes
started at the beginning of the payload which is after the header.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Use a format consistent with the rest of the code.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When RDMA is not enabled, when checking for completion of a CORER or
GLOBR do not wait for the PE unit to be loaded (indicated by GLNVM_ULD
register's PE_DONE bit being set) since that does not happen and will
cause issues such as failing to initialize the device.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add a feature to allow user to add switch filter using input like
MAC + VLAN (C-tag only) + L4 (TCP/UDP) port. API "ice_add_adv_rule"
is extended to handle this filter type.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Allow tools to access register offset 0xB8188 (GLGEN_RSTAT) for
NVMUpdate operations. This is a read-only register, so risk of other
issues stemming from this change is low. Even so, update the write
command to prevent and reject any commands which attempt to write to
this register, just like we do for GL_HICR_EN.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The rte_eal_cleanup code is not exercised by testpmd which
is the most used DPDK test tool. Add a call at end of program.
This helps exercise free and close paths which can
be checked with tools like valgrind.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch removed some unused macros defined in hns3_rss.h,
these macros are used to set tuples for abandoned RTE_ETH_FILTER_HASH
in hns3_dev_filter_ctrl().
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch removes the unnecessary assignment in the '.tx_pkt_burst' ops
implementation function to avoid performance loss.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
This patch removes the redundant initialization of the variable
named ret.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch removes the redundant statement calling hns3_stats_reset()
to clear statistical information explicitly in the initialization of
VF device, because hardware has been reset by FLR in the initialization
and the initial hardware and software statistics values are 0.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch changed the default algorithm of RSS from simle_xor to
toeplitz because toeplitz is used more frequently by upper applications
such as ceph.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch replaces custom macro named HNS3_MIN_FRAME_LEN for ethernet
minimum frame length with the macro named RTE_ETHER_MIN_LEN that defined
in DPDK framework.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, firmware adds the function of sending message to PF driver
through mailbox when the link status is changed, hns3 PMD driver can
usually recognize link state change faster through the message.
And in some extreme cases, this way is not faster than existing method
regularly updating link status by issuing the command every second in PF
driver, because of the parallel processing of mailbox and command
messages in firmware. So we reserve updating link status using timers in
PF driver, and add querying link status by issuing command to the
firmware in '.link_update' ops implementation function named
hns3_dev_link_update to solve the out of date link status.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
This patch adds supports of receive packets through interrupt mode for
hns3 PF/VF driver. The following ops functions should be implemented
defined in the struct eth_dev_ops:
rx_queue_intr_enable
rx_queue_intr_disable
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When offloading the meter, should check the action
conf and make sure it is valid.
Fixes: f46bf74887 ("net/mlx5: support meter flow action")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
In some cases when flow creation fails, we overwrite the specific
error message with a generic error message. This patch fixes it.
Fixes: d24610f7bf ("net/bnxt: allow flow creation when RSS is enabled")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Add support for RTE_FLOW_ACTION_TYPE_MARK.
Use the flow_id provided by FW during flow creation to lookup the
mark id provided by the application.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
The software L2 filter was being released back to the free pool,
though it was created in HW and the filter corresponding to an actual
'flow' would have reference to the HW L2 filter.
But if this 'flow were to be deleted, then this HW L2 filter also
would be gone.
Fix this by storing the L2 filter created originally either for an
n-tuple flow or otherwise as part of the vnic's filter list.
This would require the filter_info struct to have a backptr to the
vnic which it came from.
Now that L2 filters can be re-used for an n-tuple filter(s), delete
L2 filter as well so the reference count of an L2 filter (if reused)
can be decremented appropriately.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As part of ntuple filter, we were creating L2 filter with the ntuple
redirect queue resulting in any L2 matching flow getting steered to
this queue. For ntuple filters, we need to create the L2 filter with
default queue. The user specified redirect queue will be set while
creating the ntuple filter in hardware.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Sync flow flush routine with flow destroy so that the operations
performed per flow during a flush are the same as that are done for an
individual flow destroy by having a common function to call for both.
One of the things that was missed in the flow flush routine was the
deletion of the L2 filter that would have been created as part of an
n-tuple filter.
Also, decrement the l2_ref_cnt for a filter in the case of a filter
update as it would've bumped up previously in validate_and_parse_flow()
Fixes: 89278c59d9 ("net/bnxt: fix flow flush handling")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
In the case when CoS classification is disabled, driver was iterating
looking for only lossy profiles as that is what is expected to be used
for regular NIC operations. But in certain custom profiles, there were
no lossy profiles configured, only lossless profiles instead.
To handle such cases, it is better to fallback to using the first valid
profile.
Fixes: 698aa7e953 ("net/bnxt: add code to determine the Tx COS queue")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We need to wait for up to 500ms to receive async event notification
after forcing link down. Similarly we need to wait for up to 10s for
link to come up after configuring the hardware for link up.
Fixes: c09f57b49c ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Ting Xu <ting.xu@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Ting Xu <ting.xu@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Hardware limits that max buffer size per tx descriptor should be
(16K-1)B. So when TSO enabled, the mbuf data size may exceed the
limit and cause malicious behavior to the NIC. This patch fixes
this issue by using more tx descs for this kind of large buffer.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
In iavf_handle_virtchnl_msg(), it is not appropriate for _clear_cmd()
to be used as a notification to foreground thread. So introduce
_notify_cmd() to fix this error. In addition, since _notify_cmd()
contains rte_wmb(), rte_compiler_barrier() is not necessary.
Sending msg from VF to PF is mainly by calling iavf_execute_vf_cmd(),
the whole virtchnl msg process is like,
iavf_execute_vf_cmd() will call iavf_aq_send_msg_to_pf() to send
msg and then polling the cmd done flag as "if (vf->pend_cmd ==
VIRTCHNL_OP_UNKNOWN)"
When reply msg is returned by pf, iavf_handle_virtchnl_msg() in
isr will read msg return value by "vf->cmd_retval = msg_ret" and
immediately set the cmd done flag by calling _clear_cmd() to
notify the iavf_execute_vf_cmd().
iavf_execute_vf_cmd() find the cmd done flag is set and then
check whether command return value vf->cmd_retval is success or
not.
However _clear_cmd() also resets the vf->cmd_retval to success,
overwriting the actual return value which is used for diagnosis.
So iavf_execute_vf_cmd() will always find vf->cmd_retval is
success and then return success.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
To read line side statistics register, eth_group_sel
args in function ipn3ke_indirect_mac_read should be 0.
When eth_group_sel is 1, the nic side register is read.
Fixes: 5a6d883878 ("net/ipn3ke: implement statistics")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
There'll always be a MDD event triggered when adding
a FDIR rule. The root cause is 'LAN enable' is not
configured during control VSI setup.
Besides, correct FDIR fields for both main VSI and
control VSI.
Fixes: 84dc7a95a2 ("net/ice: enable flow director engine")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Move device state flag from ice_hw to ice_adapter since it should
not be a part of base code.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When send a adminq, if get IAVF_AQ_RC_BUSY, we should return
IAVF_ERR_NOT_READY.
Fixes: e5b2a9e957 ("net/avf/base: add base code for avf PMD")
Cc: stable@dpdk.org
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Update copyright date to cover 2019.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add 2.5G and 5G link speed support.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Update FW API version from 1.5 to 1.6 for X722
Also added NVM update related APIs.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
