ENA driver did not allow applications to call tx_cleanup. Freeing Tx
mbufs was always done by the driver and it was not possible to manually
request the driver to free mbufs.
Modify ena_tx_cleanup function to accept maximum number of packets to
free and return number of packets that was freed.
Signed-off-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Originally, the ena_com memzone counter was shared by ports, which
caused the memzones to be harder to identify and could potentially
lead to race and because of that the counter had to be atomic.
This atomic counter was global variable and it couldn't work in the
multiprocess implementation.
The memzone is now being identified by the local to port memzone counter
and the port ID - both of those information can be found in the shared
data, so it can be probed easily.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Secondary process support had been disabled for the AF_XDP PMD because
there was no logic in place to share the AF_XDP socket file descriptors
between the processes. This commit introduces this logic using the IPC
APIs.
Rx and Tx are disabled in the secondary process due to memory mapping of
the AF_XDP rings being assigned by the kernel in the primary process only.
However other operations including retrieval of stats are permitted.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Support to configure LED in firmware. Driver commands firmware to turn
the LED on and off. And OEM customize their LED solutions in firmware.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
This patch supports drop any and steer all to queue in switch
filter. Support new rte_flow pattern any to handle all packets.
The usage is listed below.
1. drop any:
flow create 0 ingress pattern any / end actions drop / end
All packets received in port 0 will be dropped.
2. steer all to queue:
flow create 0 ingress pattern any / end actions queue index 3 / end
All packets received in port 0 will be steered to queue 3.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
IP Reassembly is a costly operation if it is done in software.
The operation becomes even more costlier if IP fragments are encrypted.
However, if it is offloaded to HW, it can considerably save application
cycles.
Hence, a new offload feature is exposed in eth_dev ops for devices which
can attempt IP reassembly of packets in hardware.
- rte_eth_ip_reassembly_capability_get() - to get the maximum values
of reassembly configuration which can be set.
- rte_eth_ip_reassembly_conf_set() - to set IP reassembly configuration
and to enable the feature in the PMD (to be called before
rte_eth_dev_start()).
- rte_eth_ip_reassembly_conf_get() - to get the current configuration
set in PMD.
Now when the offload is enabled using rte_eth_ip_reassembly_conf_set(),
the resulting reassembled IP packet would be a typical segmented mbuf in
case of success.
And if reassembly of IP fragments is failed or is incomplete (if
fragments do not come before the reass_timeout, overlap, etc), the mbuf
dynamic flags can be updated by the PMD. This is updated in a subsequent
patch.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.
Only up though the first packet header in the PDU can be matched.
RSS on the eCPRI payload is not supported.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Provides ethdev callback support of rx_queue_count,
rx_descriptor_status and tx_descriptor_status.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Recent VIC models can parse GENEVE, including options, and inner
packet headers. Enable GENEVE header and option flow items. Currently,
only the first option that follows the GENEVE header can be matched,
and the GENEVE header item must specify option length.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add missing capability for outer UDP Tx checksum.
Also fixed the feature list in ice_dcf.ini
Fixes: bf89db4409bb ("net/ice: complete device info get in DCF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Users are confused with a feature with "P", added necessary
explanation for this.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
These edits affect the outermost header in the current processing state
of the packet, which might have been decapsulated by prior action DECAP.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Currently the vector and simple xmit algorithm don't support multi_segs,
so if Tx offload support MBUF_FAST_FREE, driver could invoke
rte_mempool_put_bulk() to free Tx mbufs in this situation.
In the testpmd single core MAC forwarding scenario, the performance is
improved by 8% at 64B on Kunpeng920 platform.
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Remove the szedata2 device driver as the platform is no longer
supported.
Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
These actions map to MAE action DECR_IP_TTL. It affects
the outermost header in the current processing state of
the packet, which might have been decapsulated by prior
action DECAP. It also updates IPv4 checksum accordingly.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This patch introduces shared RxQ. All shared Rx queues with same group
and queue ID share the same rxq_ctrl. Rxq_ctrl and rxq_data are shared,
all queues from different member port share same WQ and CQ, essentially
one Rx WQ, mbufs are filled into this singleton WQ.
Shared rxq_data is set into device Rx queues of all member ports as
RxQ object, used for receiving packets. Polling queue of any member
ports returns packets of any member, mbuf->port is used to identify
source port.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Flex item or flex parser is port infrastructure that allows
application to add support for a custom network header and
offload flows to match the header elements.
Flex item API adds FLEX flow item to RTE flows.
Fixes: dc4d860e8a89 ("ethdev: introduce configurable flexible item")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The GTP, GTP-U, GTP-C header fields can be matched, however NIC does not
support GTP tunneling so no items after the GTP header can be specified.
If a GTP-U or GTP-C item is specified without a preceding UDP item, the
UDP destination port is implicitly matched. For GTP, the destination UDP
port must be specified but its value is not enforced.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Protocol agnostic flow offloading in Flow Director is enabled by this
patch based on the Parser Library, using existing rte_flow raw API.
Note that the raw flow requires:
1. byte string of raw target packet bits.
2. byte string of mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Also update the ice feature list with rte_flow item raw.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT.
The former should be used instead of ambiguous PORT_ID.
The latter sends traffic to the entity represented by
the given ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for item REPRESENTED_PORT to match on traffic entering
the embedded switch from the entity represented by the given
ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add MAC addresses to filter incoming packets, support to set
multicast addresses to filter. And support to set unicast table array.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Provide the capability to update the hash key, hash types
and RETA table on the fly (without needing to stop/start
the device). However, the key length and the number of RETA
entries are fixed to 40B and 128 entries respectively. This
is done in order to simplify the design, but may be
revisited later as the Virtio spec provides this
flexibility.
Note that only VIRTIO_NET_F_RSS support is implemented,
VIRTIO_NET_F_HASH_REPORT, which would enable reporting the
packet RSS hash calculated by the device into mbuf.rss, is
not yet supported.
Regarding the default RSS configuration, it has been
chosen to use the default Intel ixgbe key as default key,
and default RETA is a simple modulo between the hash and
the number of Rx queues.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Support for runtime Rx/Tx queue setup and inner RSS is not updated.
Update feature matrix for bnxt PMD.
Fixes: 7ed45b1a7c0f ("net/bnxt: support RSS hash selection")
Fixes: 0105ea1296c9 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
