As part of device probe, check if management FW crash dump logs are
available. If available, then log an warning message and update the
epoch value too. A new struct ecore_mdump_info is added to populate
dump info including the new "reason" field by reading shared memory
region.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add new option called external PBL (page base list) to ecore_chain_alloc
for future use. Mark chain as external if external PBL is provided.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add macros PTR_LO and PTR_HI (for converting pointer to HI and LOW bits for
passing to FW hsi handles).
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In order to improve Tx switching performance an additional HSI parameter
called same-as-last-id is introduced. This resource allows FW caching the
txqs packet properties. Driver needs to set same-as-last-id to be equal to
the qzone.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Receive indication that VFs are malicious and pass it to the
caller/clients and stop serving those VF's additional resource requests.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a request for PF Function Level Reset (FLR) before a load request
Fix the location of the PF FLR initiation to be after ecore_get_hw_info()
(which invokes ecore_hw_info_port_num())
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This commits adds:
- Type of service
- Next protocol ID
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Introduce initial software for rte_flow rules.
VLAN, VXLAN are still not supported.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Previously the capability bitmap for Rx offloads was mistakenly taken
from Tx capability bitmap field. This patch fixes the problem.
Signed-off-by: Jakub Palider <jpa@semihalf.com>
This patch implements NFP PMD support for TSO but it also requires
a firmware advertising the capability.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When VF receives a message from PF, it should check the return
value. But in i40evf_execute_vf_cmd the value is ignored and not
returned to the caller.
Fixes: 95cd21f45d1b ("i40evf: allocate virtchnl commands buffer per VF")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Flows redirected to a specific queue do not have a valid RSS hash result
and the related mbuf flag must not be set.
Fixes: ecf60761fc2a ("net/mlx5: return RSS hash result in mbuf")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Removed unused "reg_info" global variable from ixgbe driver.
cat build/app/testpmd.map | grep "Allocating common symbols" -A 15
Allocating common symbols
Common symbol size file
reg_info 0x18 build/lib/librte_pmd_ixgbe.a(ixgbe_ethdev.o)
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Having those modulo operations implies costly instructions execution,
what can be avoided with conditionals and unlikely clauses.
This change makes the software ring read and write indexes to be now
always within the ring size which has to be handled properly. The main
problem is when write pointer wraps and being less than the read pointer.
This happened before, but just with indexes type size (uint32_t) wrapping,
and in that case the processor does the right thing no requiring special
handling by software.
This work has also led to discovering redundant pointers in the driver,
which have been removed.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Apparently VF over Legacy PF doesn't work, as VF would fail after
getting the initial rejection message [instead of sending an additional
one where it asks for a FW override and see if it works].
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a check and fail the VF's probe request if VF is already in
VF_ACQUIRED state.
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Rx queue access is still done prior to the index being validated by PF.
Hence move Rx queue and status block validation check before accessing
Rx queue to prevent malicious VFs from using out-of-bound queue indices.
Fixes: 98bc693e1938 ("net/qede/base: change queue start")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to return error code ECORE_INVAL instead of 0 when EQ elements
is too large as done elsewhere in this function.
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
There are certain conditions under which VF would infinitely send
ACQUIRE messages, as it will fail to understand that PF has rejected
the ACQUIRE request. Fix to reject multiple acquisition requests by VF.
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Remove unmeaningful function ID value in print.
Don't print the number of Multicast filters as part of Acquire response,
as this is an obsolete field which isn't enforced by PF.
Fixes: 86a2265e59d7 ("qede: add SRIOV support")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The vendor_id and device_id are used to determine device type. If you
don't have them, then check for determining device type fails and is
always set to default device type.
Fixes: ec94dbc57362 ("qede: add base driver")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
HW can support up to 128 queues based on the NIC config/personality.
But most of the testing is done with 32 queues for PF and 16 for VF
device across different qede devices, so change here is to advertise
only those many instead of returning max queues supported by HW.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
qede PMD does not support SR-IOV PF driver functionality, so
max_vfs is set to 0 to imply the same.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch includes the following:
- Fix missing hash_key_size advertisement
- Fix RSS hash query function
- Update RSS offload flag
- Accept user provided RSS configuration params via rx_adv_conf
in dev_configure()
- Decouple RSS configuration from common qed_update_vport() and
instead make use of existing RSS APIs for default RSS configuration
Fixes: 6d9e26c42c0d ("net/qede: get RSS hash configuration")
Fixes: 9c5d0a669f9b ("net/qede: fix RSS")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
In qede_mac_addr_add() a check is added to differentiate between
unicast/multicast mac to prevent a multicast mac from being wrongly added
to unicast filter table. Secondly, two separate lists will be used to keep
track of unicast/multicast mac filters to prevent duplicate filter
programming. The other change is to remove filter_config from struct
qed_eth_ops_pass and invoke the base APIs directly. This avoids the need
to have multiple structs and function calls.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Update the version of shared codes to cid-ixgbe.2016.11.21.tar.gz,
All files in net/ixgbe/base are developed by another team and
DPDK PMD uses them accordingly.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates the configuration of PHY from Inphi (www.inphi.com)
to flush the register write with a reg read.
The Inphi PHY is configured in ixgbe_setup_mac_link_sfp_x550a.
The Inphi PHY setup flow has been updated to read configuration reg,
write only linear/non-linear, and then read (write flush).
Signed-off-by: Wei Dai <wei.dai@intel.com>
