Store function control window offset to correctly set the offset
of prime EvQ in EF100.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Flow rules may be used mark packets. Support delivery of mark/flag
values to user in mbuf fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead allows to choose Rx prefix (which contains RSS hash value
and valid flag) per queue.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead FW supports Rx prefix choice based on required fields in Rx
prefix. The feature is generalized in libefx to provide Rx prefixes
layout for other NICs and firmware variants. Now driver can get
the prefix layout after Rx queue start and use the layout details to
check its expectations or simply in run-time.
Rx prefix choice and query interface is defined in SF-119689-TC
EF100 host interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
If RSS hash offload is requested, Rx queue should be configured
to request RSS hash information delivery.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
A new function allows to check if used Rx prefix layout matches
available Rx prefix layout. Length check is out-of-scope of the
function and caller should ensure length is either checked or
different length with everything required in place is handled
properly.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When Rx queue is created, allow to specify if the driver would like
to get RSS hash value calculated by the hardware.
Use the flag to choose Rx prefix on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce an extra variable with required Rx prefix fields mask
to make it easier to request more fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Also support Rx packet type offload.
Checksumming is actually always enabled. Report it per-queue offload
to give applications maximum flexibility.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Handle VXLAN and Geneve TSO on EF100 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead boards support TSO version 3.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add support for outer IPv4/UDP and inner IPv4/UDP/TCP checksum offloads.
Use partial checksum offload for inner TCP/UDP offload.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100 native Tx datapath demands that packet header be contiguous
when partial checksum offloads are used since helper function is
used to calculate pseudo-header checksum (and the function requires
contiguous header).
Add an explicit check for this assumption and restructure the code
to avoid TSO header linearisation check since TSO header
linearisation is not done on EF100 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add datapath log level which limits logs included in build since
on datapath it is too expensive to dive into rte_log() function
even if it does nothing.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These callbacks are used when event queue is polled via libefx.
The libefx polling is used for management event queue, but we do not
expect any Tx complete events on it, and for datapath event queue at
flushing.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These callbacks are used when event queue is polled via libefx.
The libefx polling is used for management event queue, but we do not
expect any Rx events on it, and for datapath event queue at flushing
(when these events are typically ignored, since queue is being stopped).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Control window is required to talk to NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx usage may be limited to control path only and its
implementation of datapath may not support NIC family or
PMD efx Rx/Tx datapaths implementation may be not yet ported
to updated libefx.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Update generic code to check that MTU and Rx buffer sizes
do not result in more Rx scatter segments than NIC can make.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead QDMA has limitation on maximum number of Rx scatter
buffers to be used by a packet. If the limitation is violated,
the datapath is dead. FW should ensure that it is OK, but
drivers need to know the limitation anyway to check parameters
when Rx queues are configured and MTU is set.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead does not support LED control yet. It is perfectly
fine to ignore LED set failure because of no support if
configured LED mode is the default.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
For consistency it is better to have separate MCDI wrappers.
Make efx_phy_led_mode_t visible even if EFSYS_OPT_PHY_LED_CONTROL
is disabled to be able to use it in the added wrapper arguments.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Make ef10_phy_reconfigure() simpler to read and less error-prone.
Avoid confusing case when two MCDI's are called from one function.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
CONFIG_* variables were used by make-based build system which is
removed.
Fixes: 3cc6ecfdfe ("build: remove makefiles")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a check for the return value of the sscanf call in
parse_internal_args(), returning an error if we don't get the expected
result.
Coverity issue: 362049
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
AF_XDP PMDs who wish to share a UMEM must have a unique context
(ctx) ie. netdev,qid tuple. For instance, the following will not
work since both PMDs' contexts are identical.
--vdev net_af_xdp0,iface=ens786f1,start_queue=0,shared_umem=1
--vdev net_af_xdp1,iface=ens786f1,start_queue=0,shared_umem=1
Supporting this scenario would require locks, which would impact
the performance of the more typical cases - xsks with different
netdev,qid tuples.
Fixes: 74b46340e2 ("net/af_xdp: support shared UMEM")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
During a hotplug attempt, failsafe will try to bring a subdevice that
just appeared to its internal state. On error, the subdevice is marked
for removal and will be cleaned up.
However failsafe_dev_remove() only remove active devices. Devices that
failed during probe will be stuck in DEV_PARSED state repeatedly.
Consider all devices when doing a removal round, but limit burst control
and stats saving to active devices.
Fixes: 598fb8aec6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
This patch adds checking whether the related Tx or Rx queue has been
setup in the queue-related API functions to avoid illegal address
access.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch extract checking rx_queue_id or tx_queue_id into two separate
common functions named eth_dev_validate_rx_queue and
eth_dev_validate_tx_queue.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following ethdev update in the previous patch of this series, this
patch adds CLI support to query information related to AGE action.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Existing API supports AGE action to monitor the aging of a flow.
This patch implements RFC [1], introducing the response format for query
of an AGE action.
Application will be able to query the AGE action state.
The response will be returned in the format implemented here.
[1] https://mails.dpdk.org/archives/dev/2020-September/180061.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Current implementation for PF RSS config wrap function has some
potential bugs about GTPU, e.g., same input set for GTPU inner and
non-TUN have different hash values, which should be same. Thus, we
use extra pre and post processing to re-config GTPU rules.
Fixes: 185fe122f4 ("net/ice: fix GTPU down/uplink and extension conflict")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use sample action with ratio is 1 for mirroring flow, add
supports to set the different port or encap action for mirrored
packets.
The example of test-pmd command:
1. set sample_actions 1 port_id id 1 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 1 / port_id id 2...
The flow will result in all the matched ingress packets will be sent to
port 2, and also mirrored the packets and sent to port 1.
2. set raw_encap 0 eth src.../ ipv4.../...
set raw_encap 1 eth src.../ ipv4.../...
set sample_actions 2 raw_encap index 0 / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets and with
the different encapsulated data and sent to wire.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add a new testpmd command 'set sample_actions' that supports the
multiple sample actions list configuration by using the index:
set sample_actions <index> <actions list>
The examples for the sample flow use case and result as below:
1. set sample_actions 0 mark id 0x8 / queue index 2 / end
.. pattern eth / end actions sample ratio 2 index 0 / jump group 2 ...
This flow will result in all the matched ingress packets will be
jumped to next flow table, and the each second packet will be
marked and sent to queue 2 of the control application.
2. ...pattern eth / end actions sample ratio 2 / port_id id 2 ...
The flow will result in all the matched ingress packets will be
duplicated and sent to the representor peer (VF or wire) on DPDK port 2,
and the each second packet will also be sent to E-Switch manager vport.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When using full offload, all traffic will be handled by the HW, and
forwarded to the requested VF or wire and the control application does
not see this traffic anymore. So there's a need for an action that
enables the control application some forwarded traffic visibility.
The solution introduces a new action that will sample the incoming
traffic and send a duplicated traffic with the specified ratio to the
application, while the original packet will continue to the target
destination.
The packets sampled equals is '1/ratio', the ratio value set to 1
means that the packets will be completely mirrored. The sample packet
can be assigned with different set of actions from the original packet.
In order to support the sample packet in rte_flow, new rte_flow action
definition RTE_FLOW_ACTION_TYPE_SAMPLE and structure rte_flow_action_sample
will be introduced.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
