Instead of TUNNEL filter RTE flow API should be used.
Move corresponding defines and helper structure to ethdev
driver interface since it is still used by drivers internally.
Preserve RTE_ETH_FILTER_TUNNEL because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FLEXIBLE filter RTE flow API should be used.
Temporarily preserve helper defines in public interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of EtherType filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_ETHERTYPE because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of MACVLAN filter RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a flow API RSS rule is issued in testpmd, device RSS key is changed
unexpectedly, device RSS key is changed to the testpmd default RSS key.
Consider the following usage with testpmd:
1. first, startup testpmd:
testpmd> show port 0 rss-hash key
RSS functions: all ipv4-frag ipv4-other ipv6-frag ipv6-other ip
RSS key: 6D5A56DA255B0EC24167253D43A38FB0D0CA2BCBAE7B30B477CB2DA38030F
20C6A42B73BBEAC01FA
2. create a rss rule
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end \
actions rss types ipv4-udp end queues end / end
3. show rss-hash key
testpmd> show port 0 rss-hash key
RSS functions: all ipv4-udp udp
RSS key: 74657374706D6427732064656661756C74205253532068617368206B65792
C206F76657272696465
This is because testpmd always sends a key with the RSS rule,
if user provides a key as part of the rule that key is used, if user
doesn't provide a key, testpmd default key is sent to the PMDs, which is
causing device programmed RSS key to be changed.
There was a previous attempt to fix the same issue [1], but it has been
reverted back [2] because of the crash when 'key_len' is provided
without 'key'.
This patch follows the same approach with the initial fix [1] but also
addresses the crash.
After change, testpmd RSS key is 'NULL' by default, if user provides a
key as part of rule it is used, if not no key is sent to the PMDs at all
[1]
Commit a4391f8bae85 ("app/testpmd: set default RSS key as null")
[2]
Commit f3698c3d09a6 ("app/testpmd: revert setting default RSS")
Fixes: d0ad8648b1c5 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently there exists inconsistency about name of transmission
policy for a Link Bonding device. "xmit_balance_policy" is not
correct, which should be modified to "balance_xmit_policy".
Fixes: 2950a769315e ("bond: testpmd support")
Fixes: ac718398f477 ("doc: testpmd application user guide")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_gso_segment decreased refcnt of pkt by one, but
it is wrong if pkt is external mbuf, pkt won't be
freed because of incorrect refcnt, the result is
application can't allocate mbuf from mempool because
mbufs in mempool are run out of.
One correct way is application should call
rte_pktmbuf_free after calling rte_gso_segment to free
pkt explicitly. rte_gso_segment must not handle it, this
should be responsibility of application.
This commit changed rte_gso_segment in functional behavior
and return value, so the application must take appropriate
actions according to return values, "ret < 0" means it
should free and drop 'pkt', "ret == 0" means 'pkt' isn't
GSOed but 'pkt' can be transmitted as a normal packet,
"ret > 0" means 'pkt' has been GSOed into two or multiple
segments, it should use "pkts_out" to transmit these
segments. The application must free 'pkt' after call
rte_gso_segment when return value isn't equal to 0.
Fixes: 119583797b6a ("gso: support TCP/IPv4 GSO")
Cc: stable@dpdk.org
Signed-off-by: Yi Yang <yangyi01@inspur.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
SNOW3G, KASUMI and ZUC algorithms have been added to
aesni_mb PMD in this release. These algorithms are not supported
for the crypto synchronous API, so the crypto tests for these algorithms
are disabled.
Fixes: ae8e085c608d ("crypto/aesni_mb: support KASUMI F8/F9")
Fixes: 6c42e0cf4d12 ("crypto/aesni_mb: support SNOW3G-UEA2/UIA2")
Fixes: fd8df85487c4 ("crypto/aesni_mb: support ZUC-EEA3/EIA3")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
update offload dequeue to retrieve the full ring to be
agnostic of implementation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reducing number of repetitions from 1000 to 100
to save time. Results are accurate enough with
100 loops.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
bler test results are not valid when LLR compression
is used or for loopback scenarios. Skipping these.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Replacing magic number for default wait time for hw
offload.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Run preloading explicitly for unit tests. Load each code block
by reusing existing input op then restore for the actual test.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Adding explicit check in ut that the stats counters
have the expect values.
This was identified as a gap from code coverage.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Adding explicit different ut when testing for validation
or latency (early termination enabled or not).
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Previously, the Tx timestamp field and flag were registered in testpmd,
as described in mlx5 guide.
For consistency between Rx and Tx timestamps,
managing mbuf registrations inside the driver, as properly documented,
is a simpler expectation.
The only driver to support this feature (mlx5) is updated
as well as the testpmd application.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
configure qp with OOS according to device capabilities
returned from rte_regexdev_info_get.
Signed-off-by: Guy Kaneti <guyk@marvell.com>
Acked-by: Ori Kam <orika@nvidia.com>
The order test stored a sequence number in the deprecated mbuf field
seqn.
It is moved to a dynamic field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
The reorder library used sequence numbers stored in the deprecated field
seqn.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The order test stored the flow ID in the deprecated mbuf field udata64.
It is moved to a dynamic field in order to allow removal of udata64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The test used the deprecated mbuf field udata64.
It is moved to a dynamic field in order to allow removal of udata64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The test used the deprecated mbuf field udata64.
It is moved to a dynamic field in order to allow removal of udata64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
There is a test for dynamic field registration at a specific offset.
Depending on which driver is probed, some dynamic fields may be
already registered at this offset.
This failure is skipped with a warning.
Fixes: 4958ca3a443a ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add functional tests for zero copy APIs. Test enqueue/dequeue
functions are created using the zero copy APIs to fit into
the existing testing method.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Use uintptr_t instead of unsigned long while initializing the
array of pointers.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added -v option to switch between different lookup implementations
to measure their performance and correctness.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
FIB type RTE_FIB_TYPE_MAX is used only for sanity checks,
remove it to prevent applications start using it.
The same is for FIB6's RTE_FIB6_TYPE_MAX.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When merging this series after Bruce changes on build macros, an old macro
usage has been re-introduced.
Fixes: d82d6ac64338 ("app/procinfo: add crypto security context info")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The config options CONFIG_RTE_* are simple RTE_* defines with meson.
Now that make support is dropped, update the names in logs and comments.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
There are cases where a port maybe owned by another (failsafe, netvsc,
bond); but currently proc-info has no way to look at stats of those
ports. This patch provides way for the user to explicitly ask for these
ports.
If no portmask is given the output is unchanged; it only shows the
top level ports. If portmask requests a specific port it will be
shown even if owned.
Increase the size of port mask variable to unsigned long to
allow up to 64 ports to be handled on 64 bit architecture.
The device owner is also a useful thing to show in port info.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If crypto context is not present, no point in displaying it.
This patch adds the crypto based security context info.
Also improve the flag printing to SECURITY OFFLOAD from
INLINE.
Use common code for displaying crypto context information
when doing show_ports and show_crypto.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Many drivers will report per queue info
as well as how many descriptors are in use.
Also display per-queue offload flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Revise the display of port information to include more data
and be more human friendly.
* Show driver and device information
* Show MAC address
* Show flow control information
* Combine lines if possible
* Show all multicast mode
* Show queue mempool name
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The DPDK EAL info messages at the start of a diagnostic application
are not helpful to end user. Suppress them by setting log-level
by default.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Printing extra borders does not improve readability, and is just
unnecessary. Putting TSC hz in header also makes no sense here.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This logtype is defined but never used.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
