The current vxlan parsing function is not easy to read when parsing
filter type, this patch optimizes the function and makes it more
readable.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
max_rx_pkt_len member of port RX configuration indicates max frame
length. Ethernet header and CRC length should be subtracted from it to
find MTU.
Fixes: 605164c8e7 ("net/liquidio: add API to validate VF MTU")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Refactor TX routine such that TX BD updates can all be grouped together.
Based on the TX offloads requested the TX bitfields are calculated in
a temporary variable and TX BDs are updated at the end. This will minimize
the if checks also. This change is done to easily accommodate newer TX
offload operations in the future.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
This patch fixes missing PKT_TX_TUNNEL_VXLAN Tx offload flag from the
supported Tx offloads and an incorrect tunnel TX BD bit setting.
Fixes: 3d4bb44116 ("net/qede: add fastpath support for VXLAN tunneling")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
This patch does the following refactoring and cleanup:
- As part of multi-queue support a struct member called 'type' was added
in struct qede_fastpath in order to identify whether a queue is RX or
TX and take actions based on that. This was unnecessary in the first
place since pointers to RX and TX queues are already available in
rte_eth_dev->data. So all usage of fp->type is removed.
- Remove remaining additional layer of internal callbacks for RX/TX
queues and fastpath related operations from the qed_eth_ops_pass.
With this change the files qede_eth_if.[c,h] are no longer needed.
- Add new per-queue start/stop APIs instead of clubbing it all together.
- Remove multiple TXQs references (num_tc and fp->txqs) since CoS is not
supported.
- Enable sharing of the status block for each queue pair.
- Remove enum qede_dev_state and instead make use of existing port
states RTE_ETH_QUEUE_STATE_STOPPED/RTE_ETH_QUEUE_STATE_STARTED.
- Move qede_dev_start() and qede_dev_stop() to qede_ethdev.c from
qede_rxtc.c.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
The refactoring is mainly for two reasons:
- To remove an additional layer of internal callbacks for all vport
related operations from the struct qed_eth_ops_pass. Instead, we
can invoke base APIs directly.
- Splitting a single large vport-update configuration into multiple and
independent vport-update operations. Each configuration would touch
only the required config bits that needs an update.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
This patch adds support to configure the VF L2 Rx settings.
The per VF setting is maintained in bnxt_child_vf_info.l2_rx_mask
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to insert a default VF VLAN.
Also track the current default VLAN per vnic for the VF.
When setting the default VLAN, avoid setting it to the current value.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to allocate a filter and program
it in the hardware for every MAC address added to the specified
function.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to determine the Rx status of a VF.
It adds the rte_pmd_bnxt_get_vf_rx_status call, which calculates
the VNIC count of the function to get the Rx status.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to get and clear VF stats.
It also adds the necessary HWRM structures to send the command
to the firmware.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to
1) enable VF MAC anti spoof.
2) QOS configuration for specified VF.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add functions rte_pmd_bnxt_set_tx_loopback,
rte_pmd_bnxt_set_all_queues_drop_en and
rte_pmd_bnxt_set_vf_mac_addr to configure tx_loopback,
queue_drop and VF MAC address setting in the hardware.
It also adds the necessary functions to send the HWRM commands
to the firmware.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) Use hwrm_stat_ctx_query command to query statistics
Using hwrm_stat_ctx_query command will allow polling
the statistics from hardware instead of using the current push
model from the hardware which does a DMA of the stats to the host
at fixed intervals.
2) Use the rx_mbuf_alloc_fail to track mbuf alloc failures.
3) We were wrongly incrementing hwrm_cmd_seq in bnxt_hwrm_stat_clear
and bnxt_hwrm_stat_ctx_alloc functions. This patch fixes that.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to enable and disable LRO
To support this feature, the driver creates an aggregator ring.
When the hardware starts doing LRO, it sends a tpa_start completion.
When the driver receives a tpa_end completion, it indicates that the
LRO chaining is complete.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to modify MTU using the set_mtu dev_op.
To support frames > 2k, the PMD creates an aggregator ring.
When a frame greater than 2k is received, it is fragmented
and the resulting fragments are DMA'ed to the aggregator ring.
Now the driver can support jumbo frames upto 9500 bytes.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch update bnxt.int to document Allmulticast mode
which is already supported by the PMD.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds VLAN strip and offload callbacks.
To add a VLAN filter:
For each VNIC and each associated filter(s)
if VLAN exists:
if VLAN matches vlan_id
VLAN filter already exists, just skip and continue
else
add a new MAC+VLAN filter
else
Remove the old MAC only filter
Add a new MAC+VLAN filter
To remove a VLAN filter:
For each VNIC and each associated filter(s)
if VLAN exists && VLAN matches vlan_id
remove the MAC+VLAN filter
add a new MAC only filter
else
VLAN filter doesn't exist, just skip and continue
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to get and reset xstats dev_ops
dev_ops added:
xstats_get, xstats_get_name, xstats_reset
HWRM commands added:
hwrm_port_qstats, hwrm_port_clr_stats
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for udp_tunnel_port_add/del dev_ops to configure a UDP port
for VXLAN and Geneve Tunnel protocols.
The HWRM supports only one global destination port for a tunnel type,
use a reference counter to keep track of its usage.
Cache the configured VXLAN/Geneve ports and use that value to check
if the right UDP port is being freed up.
Skip calling bnxt_hwrm_tunnel_dst_port_alloc if the same UDP port is
being programmed.
Skip calling bnxt_hwrm_tunnel_dst_port_free if no UDP port has been
configured.
Also update tx offload capabilities
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add the cmd_err and opaque_0 and opaque_1 fields to HWRM error
messages. These allow better debugging of some classes of HWRM
errors.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rte_malloc_virt2phy() does not return a physical address if huge pages
aren't in use. Further, rte_memzone->phys_addr is not a physical address.
Use rte_mem_virt2phy() and manually lock pages to support lack of
huge pages.
Also check the return value of rte_mem_virt2phy()
Verify the function returns an address. Otherwise return an error and
log a message.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) For a VF, query the firmware to determine if a MAC address is
already configured. If not configure a random default MAC address.
2) Do not initialize the default completion ring in
bnxt_alloc_hwrm_rings().
3) While registering for async events with the firmware,
use func_vf_cfg for a VF and use func_cfg for a PF.
4) Query the VNIC plcmode config using the bnxt_hwrm_vnic_plcmodes_qcfg
before a VNIC is updated. Reconfigure the VNIC with the plcmode
configuration queried earlier. Not doing this could overwrite
the plcmodes in some cases.
5) Reorg the bnxt_handle_fwd_req to properly handle the forwarded
requests. The previous code did not handle it completely.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) Move the function reset to bnxt_dev_init.
On the same lines, setup, enable and request interrupt to init path.
Memory allocation is also being done in the init path.
2) After a function reset, configure the VFs. Distribute resources
evenly between all functions (PF and VF) for now. In the future, this
should be controllable.
3) The bnxt_vf_info and bnxt_pf_info had lot of duplication. Move the
common items to struct bnxt. And only unique items specific to PF
remain in the struct bnxt_pf_info.
4) Program the firmware to allow certain commands sent by a VF.
Disallowing these will prevent clean VF driver cleanup.
5) Since PF/VF need to allocate resources from a pool in the hardware,
use func_qcaps and func_qcfg to appropriately query the capabilities
and available resources.
6) If a PF is being initialized and no VFs are allocated, explicitly
call func_cfg to allocate the resources.
7) Once resources are requested from the firmware, update local copy
of resource count in struct bnxt only after sending the func_qcfg to
make sure the allocation request in the firmware went through.
The changes in this patch will be used by the subsequent patches
to allow proper initialization of PF/VF instance.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch updates the Broadcom bnxt PMD to version 1.7.7
Most of the changes in the patch are in the hsi_struct_def_dpdk.h - an
autogenerated file. The changes in the *.c files are because of changes
in the macro names.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
CRC bytes should be excluded, so rx/tx bytes of VF stats is aligned
with PF stats.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tx/Rx byte counts of internal managed packet should be
excluded from the total rx/tx bytes.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When the last fdir flow be destroyed, the flag "mask_added"
should be reset, so the remain mask info will not take effect
when a new flow be added.
Fixes: a14de8b498 ("net/ixgbe: destroy consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit adds support of FLAG action and PASSTHRU
action for flow director.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To enable L4 checksum offload for SCTP packets, E1000_RXCSUM_CRCOFL
should be set.
Otherwise, for SCTP packets even L4 checksum not calculated, it will
return PKT_RX_L4_CKSUM_GOOD.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
SW completion ring of Tx (txq->elts) stores individual mbufs even if a
multi-segmented packet is sent. rte_pktmbuf_free_seg() must be used when
cleaning up the completion ring. Otherwise, chained mbufs are redundantly
freed and finally it would cause a crash.
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
CC: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
A sanity check is required in priv_fdir_disable(). If resizing Rx queue
fails, this can cause a crash by referencing a NULL pointer.
Fixes: 76f5c99e68 ("mlx5: support flow director")
Fixes: 0cdddf4d06 ("net/mlx5: split Rx queue structure")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: David Riddoch <driddoch@solarflare.com>
There is not point to check other Tx descriptors.
It is important if Tx datapath does not reset Tx descriptor
mbuf pointer to NULL on completion (EF10 simple Tx will do).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: David Riddoch <driddoch@solarflare.com>
When .mac_addr_add() was changed to allow a return code, ring was changed
to return -ENOTSUP. This changes the behavior of the rte_ring driver in
a way that does not maintain backward compatibility. Additionally, if
the intent is to return -ENOTSUP, you could simply not define the stubs.
Fixes: 6d01e580ac ("ethdev: fix adding invalid MAC address")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since commit 8f094a9ac5 ("mbuf: set mbuf fields while in pool"), some
fields are already initialised and do not need to be modified by the PMD
anymore.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Flow rules must be applied in the same order as they have been created and
thus destroyed in the reverse order.
Fixes: 2097d0d1e2 ("net/mlx5: support basic flow items and actions")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
