In current DPDK framework, each Rx queue is pre-loaded with mbufs to
save incoming packets. For some PMDs, when number of representors scale
out in a switch domain, the memory consumption became significant.
Polling all ports also leads to high cache miss, high latency and low
throughput.
This patch introduces shared Rx queue. Ports in same Rx domain and
switch domain could share Rx queue set by specifying non-zero sharing
group in Rx queue configuration.
Shared Rx queue is identified by share_rxq field of Rx queue
configuration. Port A RxQ X can share RxQ with Port B RxQ Y by using
same shared Rx queue ID.
No special API is defined to receive packets from shared Rx queue.
Polling any member port of a shared Rx queue receives packets of that
queue for all member ports, port_id is identified by mbuf->port. PMD is
responsible to resolve shared Rx queue from device and queue data.
Shared Rx queue must be polled in same thread or core, polling a queue
ID of any member port is essentially same.
Multiple share groups are supported. PMD should support mixed
configuration by allowing multiple share groups and non-shared Rx queue
on one port.
Example grouping and polling model to reflect service priority:
Group1, 2 shared Rx queues per port: PF, rep0, rep1
Group2, 1 shared Rx queue per port: rep2, rep3, ... rep127
Core0: poll PF queue0
Core1: poll PF queue1
Core2: poll rep2 queue0
PMD advertise shared Rx queue capability via RTE_ETH_DEV_CAPA_RXQ_SHARE.
PMD is responsible for shared Rx queue consistency checks to avoid
member port's configuration contradict each other.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
SubFunction is a portion of the PCI device, created on demand, a SF
netdev has its own dedicated queues(txq, rxq). A SF netdev supports
eswitch representation offload similar to existing PF and VF
representors.
To support SF representor, this patch introduces new devargs syntax,
examples:
representor=sf0 - single SubFunction representor
representor=sf[1,3,5] - single list
representor=sf[0-3], - single range
representor=sf[0,2-6,8,10-12] - list with singles and ranges
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Using external explicit references to http://doc.dpdk.org makes older
releases documentation point to the current master documentation pages.
Switch to internal references.
Fixes: 59ad25fe2184 ("doc: add overview of qat guide")
Fixes: 30e7fbd62839 ("doc: add event timer adapter guide")
Fixes: b7f859c9a9a5 ("doc: add switch representation documentation")
Fixes: f714a18885a6 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The DPDK website has a new URL scheme since June 2018.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add document to describe the model for representing switching capable
devices in DPDK, using a general ethdev port model and through port
representors. This document also details the port model and the
rte_flow semantics required for flow programming, as well as listing
some example use cases.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Marko Kovacevic <marko.kovacevic@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
