Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This patch initializes the salt value used by the following cipher
algorithms:
- CBC: random salt
- GCM/CTR: the key required is 20B, and the last 4B are used as salt.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a specific cryptodev queue size macro.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Application will segfault if there is IPv4 or IPv6 and no SP/ACL rules
for IPv4 or IPv6 respectively.
Avoid checking the ACL/SP in such cases.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
RFC3686: Using AES Counter (CTR) Mode With IPsec ESP.`
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NIST SP800-38A recommends two methods to generate unpredictable IVs
(Initilisation Vector) for CBC mode:
1) Apply the forward function to a nonce (ie. counter)
2) Use a FIPS-approved random number generator
This patch implements the first recommended method by using the forward
function to generate the IV.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds two sample configuration files to ipsec-secgw sample
application. The sample configuration files show how to setup
back-to-back systems that would forward traffic through an IPsec
tunnel.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. A command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The usual device sequence is configure, queue setup and start.
Crypto device should be started before use.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
GCC 4.5.x does not handle well initializing anonymous union and/or
structs.
To make the compiler happy we name those anonymous union/struct.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When sending Inbound non IPSec traffic that matches an Inbound Security
Policy set to Protect, the code will check that the SPI of the packet
and the associated Security Association match.
That check should only be done for IPSec packets and results in SEGFAULT
when done on non IPSec packets.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
IPSec transport mode support.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Support IPSec IPv6 allowing IPv4/IPv6 traffic in IPv4 or IPv6 tunnel.
We need separate Routing (LPM) and SP (ACL) tables for IPv4 and IPv6,
but a common SA table.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Modify the default SP config variables names to be consistent with SA.
The resulting naming convention is that variables with suffixes _out/_in
are the default for ep0 and the reverse for ep1.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The application only ASSERTS that an SA is not NULL (only when debugging
is enabled) without properly dealing with the case of not having an SA
for the processed packet.
Behavior should be such as if no SA is found, drop the packet.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Rework implementation moving from function pointers approach, where each
function implements very specific functionality, to a generic function
approach.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for building the application with DEBUG=1.
This option adds the compiler stack protection flag and enables extra
output in the application.
Also remove unnecessary VPATH setup.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Building the application with -O3 and -fstack-protection (default in
Ubuntu) results in the following error:
*** stack smashing detected ***: ./build/ipsec-secgw terminated
The error is caused by storing an 8B value in a 4B variable.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Current code fails to correctly check padding sequence for inbound
packets.
Padding sequence starts on 1 but it checks for 0.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some architectures (ex: Power8) have a cache line size of 128 bytes,
so the drivers should not expect that prefetching the second part of
the mbuf with rte_prefetch0(&m->cacheline1) is valid.
This commit add helpers that can be used by drivers to prefetch the
rx or tx part of the mbuf, whatever the cache line size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
In icc 14.0, compilation was broken:
examples/ipsec-secgw/sa.c(212): error: a designator for an anonymous
union member can only appear within braces corresponding to that anonymous union
.cipher = { RTE_CRYPTO_CIPHER_OP_ENCRYPT, RTE_CRYPTO_CIPHER_AES_CBC,
^
The member in anonymous union initialization should be inside '{}',
otherwise it will report an error.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
error: loops in this subroutine are not good vectorization candidates
(try compiling with O3 and/or IPO).
this error occurs in icc 15.0.1
Solution to disable this diagnostic message
https://software.intel.com/en-us/forums/intel-c-compiler/topic/537688
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Fixes: 8cc72f2814 ("examples/vmdq_dcb: support X710")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In FreeBSD, sys/types.h and netinet/in.h need to be included before
netinet/ip.h
There were missed typedef for u_char - <sys/types.h>
There were missed network definitions - <netinet/in.h>
Failure #13: http://dpdk.org/ml/archives/test-report/2016-March/001896.html
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Sample app implementing an IPsec Security Geteway.
The main goal of this app is to show the use of cryptodev framework
in a "real world" application.
Currently only supported static IPv4 ESP IPsec tunnels for the following
algorithms:
- Cipher: AES-CBC, NULL
- Authentication: HMAC-SHA1, NULL
Not supported:
- SA auto negotiation (No IKE implementation)
- chained mbufs
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
