The link speed shall be on the basis of mac type.
Fixes: 799db4568c ("net/dpaa: support device info and speed capability")
Cc: shreyansh.jain@nxp.com
Cc: stable@dpdk.org
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Set the missing dev data mtu for the correct size.
Set the max supported size in hw, if user is asking for more.
Fixes: 9658ac3a4e ("net/dpaa: set the correct frame size in device MTU")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The current code has the hardcoded seq for fq allocation.
It require multiple changes, when some of the interfaces
are assigned to kernel stack. Changing it on the mac
id basis provide the flexibility to assign any interface
to kernel.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Some PMDs, especially ones with vector receives, require a minimum number
of receive buffers in order to receive any packets. If the first slave
read leaves less than this number available, a read from the next slave
may return 0 implying that the slave doesn't have any packets which
results in skipping over that slave as the next active slave.
To fix this, implement round robin for the slaves during receive that
is only advanced to the next slave at the end of each receive burst.
This is also done to provide some additional fairness in processing in
other bonding RX burst routines as well.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Matan Azrad <matan@mellanox.com>
The AVF driver was missing $(WERROR_FLAGS) in it's cflags, which means
that a number of compilation errors were getting missed. This patch adds
in the flag and fixes most of the errors, just disabling the
strict-aliasing ones.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Fixes: 319c421f38 ("net/avf: enable SSE Rx Tx")
CC: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Compiling with all warnings turned on causes errors about unused variables
and an unused label. Remove these to allow building without having to
disable those warnings.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Fixes: 3fd7a3719c ("net/avf: enable ops for MTU setting")
Fixes: d6bde6b5ea ("net/avf: enable Rx interrupt")
Fixes: 22b123a36d ("net/avf: initialize PMD")
Fixes: 319c421f38 ("net/avf: enable SSE Rx Tx")
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Fixes: 1060591ead ("net/avf: enable bulk allocate Rx")
CC: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add support of imissed and q_errors statistics, reported by PCIE_QPRDC
register (see datasheet, section 11.27.2.60), which exposes the number
of receive packets dropped for a queue.
Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
In former API, ETH_TXQ_FLAGS_NOMULTSEGS was merely a hint indicating
that application will never send multisegmented packets, allowing
pmd to choose different tx methods accordingly.
In new API, DEV_TX_OFFLOAD_MULTI_SEGS became an offload capability
that is advertised by pmds, some of them do not advertise it and
expect to never receive fragmented packets (octeontx, axgbe)
So an ethdev that supports multisegmented packets should properly
advertise it.
Problem was spotted and tested on e1000, should be also present in
ixgbe_vf representor.
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In former API, ETH_TXQ_FLAGS_NOMULTSEGS was merely a hint indicating
that application will never send multisegmented packets, allowing
pmd to choose different tx methods accordingly.
In new API, DEV_TX_OFFLOAD_MULTI_SEGS became an offload capability
that is advertised by pmds, some of them do not advertise it and
expect to never receive fragmented packets (octeontx, axgbe)
So an ethdev that supports multisegmented packets should properly
advertise it.
Problem was spotted and tested on e1000, should be also present in
i40e_vf representor.
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In former API, ETH_TXQ_FLAGS_NOMULTSEGS was merely a hint indicating
that application will never send multisegmented packets, allowing
pmd to choose different tx methods accordingly.
In new API, DEV_TX_OFFLOAD_MULTI_SEGS became an offload capability
that is advertised by pmds, some of them do not advertise it and
expect to never receive fragmented packets (octeontx, axgbe)
So an ethdev that supports multisegmented packets should properly
advertise it.
Problem was spotted and tested on e1000, should be also present in
fm10k.
Fixes: 30f3ce999e ("net/fm10k: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In former API, ETH_TXQ_FLAGS_NOMULTSEGS was merely a hint indicating
that application will never send multisegmented packets, allowing
pmd to choose different tx methods accordingly.
In new API, DEV_TX_OFFLOAD_MULTI_SEGS became an offload capability
that is advertised by pmds, some of them do not advertise it and
expect to never receive fragmented packets (octeontx, axgbe)
So an ethdev that supports multisegmented packets should properly
advertise it.
Fixes: e5c05e6590 ("net/e1000: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There are two function that call sfc_tx_qfini():
sfc_tx_fini_queues() and sfc_tx_queue_release(). But only
sfc_tx_queue_release() sets tx_queues pointer of the device data to NULL.
It may lead to the scenario in which a queue is destroyed by
sfc_tx_fini_queues() and after the queue is attempted to be destroyed again
by sfc_tx_queue_release().
Move NULL assignment to sfc_tx_qfini().
Fixes: b1b7ad933b ("net/sfc: set up and release Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
There are two function that call sfc_rx_qfini():
sfc_rx_fini_queues() and sfc_rx_queue_release(). But only
sfc_rx_queue_release() sets rx_queues pointer of the device data to NULL.
It may lead to the scenario in which a queue is destroyed by
sfc_rx_fini_queues() and after the queue is attempted to be destroyed again
by sfc_rx_queue_release().
Move NULL assignment to sfc_rx_qfini().
Fixes: ce35b05c63 ("net/sfc: implement Rx queue setup release operations")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This statistic should include 64byte and smaller frames.
Fix EF10 calculation to match Siena code.
Fixes: 8c7c723dfe ("net/sfc/base: import MAC statistics")
Cc: stable@dpdk.org
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The capability bits to request FEC modes are implicitly valid
when the corresponding FEC mode is a supported capability.
Drivers expect that it is only valid to advertise those
capabilities explicitly marked as supported. The capabilities
reported by firmware is modified with the implicit capabilities
to present the explicit model to drivers.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Client drivers may use either legacy flags, for example,
EFX_RX_HASH_TCPIPV4, or generalised flags, for example,
EFX_RX_HASH(IPV4_TCP, 4TUPLE), to configure RSS hash.
The libefx is able to recognise what scheme is used.
Legacy flags may be consumed directly by a chip-specific handler to
configure the NIC, that is, on EF10, these flags can be used to fill
in legacy RSS mode field in MCDI request. Generalised flags can also
be directly used in EF10-specific handler as they are fully compatible
with additional fields of the same MCDI request.
Legacy flags undergo conversion to generalised flags before they
are consumed by a chip-specific handler. This conversion is used to
make sure that chip-specific handlers expect only generalised flags
in the input for the sake of clarity of the code.
Depending on firmware capabilities, a chip-specififc handler either
supplies the input to the NIC directly, for example,
EFX_RX_HASH(IPV4_TCP, 4TUPLE) flag will enable 4 bits in
RSS_CONTEXT_SET_FLAGS_IN_TCP_IPV4_RSS_MODE field on EF10, or takes
the opportunity to translate the input to enable bits which don't map
to the generic flag, like setting
RSS_CONTEXT_SET_FLAGS_IN_TOEPLITZ_TCPV4_EN on EF10 when the firmware
claims no support for additional modes.
However, this approach has introduced a severe problem which can be
reproduced with ultra-low-latency firmware variant. In order to enable
IP hash, EF10-specific handler requires the user to request 2-tuple
hash for IP-other, TCP and UDP traffic classes, unconditionally.
In example, IPv4 hash can be enabled using the following input:
EFX_RX_HASH(IPV4_TCP, 2TUPLE) | EFX_RX_HASH(IPV4_UDP, 2TUPLE) |
EFX_RX_HASH(IPV4, 2TUPLE).
At the same time, on ultra-low-latency firmware, the common code will
never report support for any UDP tuple to the client driver. That is,
in the same example, the driver will use EFX_RX_HASH(IPV4_TCP, 2TUPLE) |
EFX_RX_HASH(IPV4, 2TUPLE). This input will not be recognised by
EF10-specific handler, and RSS_CONTEXT_SET_FLAGS_IN_TOEPLITZ_IPV4_EN
bit will not be set in the MCDI request.
In order to solve the problem, the patch removes conversion code
from chip-specific handlers and adds appropriate code to convert
EFX_RX_HASH() flags to their legacy counterparts to the common scale
mode set function. If the firmware does not support additional modes,
the function will convert generalised flags to legacy flags correctly
without any demand for UDP flags and pass the result to a chip-specific
handler.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS mode bits can be accessed a lot easier in the hash
type value provided that the variable type is uint32_t.
The macro helper can be removed to enhance readability.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The efx_rx_scale_hash_flags_get interface is unsafe, as it does not
have an argument for the size of the output buffer used to return
the flags. While the only caller currently supplies a sufficiently
large buffer, this should be checked at runtime to avoid writing
past the end of the buffer.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The API which is used to list supported hash flags verifies
hash algorithm choice before writing the output. This check
is based on a switch() statement which has only two options
and no distinctive actions to be conducted for each of them.
Use simpler code instead of switch() to improve readability.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The function used to retrieve supported RSS flags has an
argument which should be named properly to indicate
that it's a pointer.
Fixes: 613cbe75ae ("net/sfc/base: add a new means to control RSS hash")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
NIC config is initialized during NIC probe.
Fixes: 19b64c6ac3 ("net/sfc/base: import libefx base")
Cc: stable@dpdk.org
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The efx_nic_hw_unavailable() checks ensure that if the NIC hardware
has failed or has been physically removed then libefx will stop
further attempts to access the hardware.
Add an interface for libefx clients to force unavailability, so the
hardware is treated as dead or removed even if still physically present.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add efx_nic_hw_unavailable() routine to check for hardware presence
before continuing with NIC operations.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
In SF bug 61297 it's been confirmed that the hardware does not always
calculate the TCP checksum correctly with TSO sends.
The value of the Total Length field (IPv4) or Payload Length field
(IPv6) is the critical factor. We're sufficiently confident that if
these fields are zero then the checksum will be calculated correctly.
The information may be used by the drivers to check if the workaround is
required when FATSOv2 is implemented.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The SFN driver's PartitionControl WMI object requires an API to parse
and filter partition data in TLV format, particularly for the Dynamic
Config partition. The ef10_nvram_buffer functions provide this
functionality but are tied to use with license partition only.
Modify functions so they are applicable to all TLV partitions and add
functions to support in-place tag modification.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Extend efx_mcdi_get_port_modes() to optionally pass on the default
port mode field. This provides a more direct way of handling the case
where the dynamic config does not specify the port mode than the
alternative of a lookup table indexed by MCFW subtype.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Functions to process the DHCP option list format used by the expansion
ROM config buffers, to support extracting and updating of individual
options.
The initial use case is the driver presenting the global and per-PF
options as separate items, with the driver implementing the
synchronization of global options across the configuration buffers
for all PFs.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Size of provided memory should be consistent with specified size.
Fixes: dfb3b1ce15 ("net/sfc/base: import monitors access via MCDI")
Cc: stable@dpdk.org
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Description of sensors is generated from firmware sources.
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
No need for probe messages when a TxQ is too full for a post to be done.
Existing drivers check if there is room in the queue before posting
descriptors, even though efx_tx_qdesc_post() does the check itself.
The new SFN Windows driver doesn't perform the check before calling
efx_tx_qdesc_post(), but that means these probes can get frequently
printed out. It's normal driver behaviour so there's no need to print
an error.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Remove obsolete monitor types since Falcon SFN4000 series adapters
no longer supported by libefx.
Rename MCDI monitors to be consistent with YML.
The code may be simplified and generalized since only MCDI monitors
remain.
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fixes: 17551f6dff ("net/sfc/base: add API to control UDP tunnel ports")
Cc: stable@dpdk.org
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move empty definitions for platform-specific annotations from efsys.h
to EFX headers.
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Lee <alee@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add definitions of dynamic config and expansion ROM backup
partitions.
Signed-off-by: Paul Fox <pfox@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Functions declared in mcdi_mon.h are implemented in mcdi_mon.c.
The build fails if compiler options require declaration before definition.
Fixes: dfb3b1ce15 ("net/sfc/base: import monitors access via MCDI")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Required by GLD cstyle.
Fixes: d4f4b8f9d2 ("net/sfc/base: make RxQ type data an union")
Cc: stable@dpdk.org
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
