RSS configuration works for all e1000 NICs except 82576.
This patch fixes this issue by correcting queue number
in RSS configuration.
Fixes: 424ae915baf0 ("net/e1000: move RSS to flow API")
Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Removing double copy of driver information. 04664e5c8346 has shifted
that from driver's probe to bus's probe.
Fixes: 04664e5c8346 ("drivers/bus: fill driver reference after NXP probing")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Removing double copy of driver information. 04664e5c8346 has shifted
that from driver's probe to bus's probe.
Fixes: 04664e5c8346 ("drivers/bus: fill driver reference after NXP probing")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The probing functions of NXP buses were missing to set
the driver used for successfully probing a device.
The NXP driver and the generic rte_driver are now set
in the device structures.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The rte_afu_driver is assigned to rte_afu_device.driver during probing.
There is no need of accessing the rte_afu_driver via rte_device.driver
and type casting to its container.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Note that the library built by meson will not have the _uio suffix:
librte_pmd_vmxnet3.so - as it follows the directory name, while the
legacy makefile rename it to librte_pmd_vmxnet3_uio.so.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Versions of meson prior to 0.47 flattened the parameters to the
"set_variable" function, which meant that the function could not take
array variables as a parameter. Therefore, we need to disable driver
tracking for those older versions, in order to maintain compatibility
with the minimum supported 0.41 version, and also v0.45 shipped in
Ubuntu 18.04 release.
Fixes: 806c45dd483d ("build: add configuration summary at end of config")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Timothy Redaelli <tredaelli@redhat.com>
After running meson to configure a DPDK build, it can be useful to know
what was automatically enabled or disabled. Therefore, print out by way of
summary a categorised list of libraries and drivers to be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: e940646b20fa ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: 56bb54ea1bdf ("raw/ifpga/base: add Intel FPGA OPAE share code")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The QAT compression driver was named "qat".
Rename to compress_qat for consistency with other compressdev drivers
and with crypto_qat.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Comments says "no csum error report support" but there is no check
related csum offloads. Removing the comment.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Integrate accelerated networking support into netvsc PMD.
This allows netvsc to manage VF without using failsafe or vdev_netvsc.
For the exception vswitch path some tests like transmit
get a 22% increase in packets/sec.
For the VF path, the code is slightly shorter but has no
real change in performance.
Pro:
* using netvsc is more like other DPDK NIC's
* the exception packet uses less CPU
* much smaller code size
* no locking required on VF transmit/receive path
* no legacy Linux network device to get mangled by userspace
* much simpler (1K vs 9K) LOC
* unified extended statistics
Con:
* using netvsc has more complex startup model
* no bifurcated driver support
* no flow support (since host does not have flow API).
* no tunnel offload support
* no receive interrupt support
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Implement callback functionality on link state changes.
This is not really driven off of interrupt file descriptor like most other
PMD's. Instead, it happens when a link state change message arrives
in the common ring buffer.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
If application sends faster than vswitch can keep up, then the
transmit descriptor pool will be exhausted. This is not a failure
so change the name statistic and don't include it in oerrors.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Bonding driver ignores the value of RSS key (that is set in the port RSS
configuration) in bond_ethdev_configure(). So the only way to set
non-default RSS key is by using rss_hash_update(). This is not an
expected behaviour.
Make the bond_ethdev_configure() set default RSS key only if
requested key is set to NULL.
Fixes: 734ce47f71e0 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Default Redirection Table that is set in bonding driver is distributed
evenly over all Rx queues only within every RETA group (the first RETA
entries in every group are always start with zero). But in the most
drivers, default RETA is distributed over all Rx queues without sequence
resets in the beginning of a new group, which implies more balanced
per-core load.
Change the default RETA to be evenly distributed over all Rx queues
considering the whole table.
Fixes: 734ce47f71e0 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Add flow operations to match packets based on destination MAC address.
Allocate and program hardware MPS table with the destination MAC
address to be matched against. The returned MPS index is then used while
offloading flows to LETCAM (maskfull) and HASH (maskless) filter regions.
Also update existing mac_addr_set() to use the new MPS table API.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Multi Port Switch table. MPS
holds destination MAC addresses to be matched against incoming packets
for further rule processing. Packets not matching any entry in MPS table
will be dropped by default, unless the underlying port is in promiscuous
mode.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add flow API operations to offload vlan push, pop, and rewrite actions.
For vlan push or rewrite actions, allocate and program an entry from
L2T table. Use the L2T index to program vlan actions for LETCAM
(maskfull) and HASH (maskless) filters.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Layer 2 Table. L2T holds
information necessary to rewrite specific fields in packet, such
as destination MAC address and vlan id.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
>From the Intel Ethernet Controller X710/XXV710/XL710 Specification
Update:
Starting from NVM 5.02, if the Set Local LLDP MIB command is
received while the DCBx specific agent is stopped, the command
returns an EPERM error. If the command is received while the
LLDP agent is stopped, it sets the local MIB without exchanging
LLDP with peer, and returns SUCCESS.
This results in the harmless, but annoying, diagnostic:
default dcb config fails. err = -53, aq_err = 1.
So, if possible (older firmwares cannot safely stop LLDP), stop the
LLDP daemon when we are in software mod before we attempt to call
i40e_set_dcb_config.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds alarm handler, and then i40e
PF will use alarm handler instead of interrupt
handler when device is started and Rx interrupt
mode is disabled. This way will save CPU cycles
during receiving packets.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch checks negotiated features to see if necessary to offload
before set the tap device offload capabilities. It also checks if kernel
support the TUNSETOFFLOAD operation.
Fixes: 5e97e4202563 ("net/virtio-user: enable offloading")
Cc: stable@dpdk.org
Signed-off-by: Eric Zhang <eric.zhang@windriver.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Rxq cq_ci was 16 bits while hardware is expecting to wrap
around 24 bits, this caused interrupt failure after burst of packets.
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In case of a temporary failure the ixgbe driver can return the internal
error IXGBE_ERR_RESET_FAILED to the application. Instead, return
-EAGAIN as per the public API specification.
Fixes: cddaf87a1ecb ("lib: fix unused values")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When bond slave devices cannot transmit all packets in bufs array,
tx_burst callback shall merge the un-transmitted packets back to
bufs array. Recent merge logic introduced a bug which causes
invalid mbuf addresses being written to bufs array.
When caller frees the un-transmitted packets, due to invalid addresses,
application will crash.
The fix is avoid shifting mbufs, and directly write un-transmitted
packets back to bufs array.
Fixes: 09150784a776 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Chas Williams <chas3@att.com>
Some NFP firmwares support live changes to the MAC address, but
this is not always true and the firmware advertises it accordingly.
This patch checks if firmware does not support live changes and
sets RTE_ETH_DEV_NOLIVE_MAC_ADDR in that case.
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Mark internal variables static to avoid potential redefinition
errors later on.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Reviewed-by: Yelena Krivosheev <yelena@marvell.com>
Fix used_bpools array initialization by using range initializer.
This way all necessary variables are properly initialized regardless
of PP2_NUM_PKT_PROC value.
Fixes: 0ddc9b815b11 ("net/mrvl: add net PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add MVEP (Marvell Embedded Processors) to drivers/common which
will keep code reused by current and future MRVL PMDs.
Right now we have only common DMA memory initialization routines there.
Signed-off-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Natalie Samsonov <nsamsono@marvell.com>
