This patch adds hardware offloading support for IPV4, UDP and TCP checksum
verification, including inner/outer checksums on supported tunnel types.
It also restores packet type recognition support.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds hardware offloading support for IPv4, UDP and TCP checksum
calculation, including inner/outer checksums on supported tunnel types.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds support for accessing the hardware directly when
handling Rx packets eliminating the need to use Verbs in the Rx data
path.
Rx scatter support: calculate the number of scatters on the fly
according to the maximum expected packet size.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch dissociates single-queue indirection tables and hash QP objects
from Rx queue structures to relinquish their control to users through the
RSS flow rule action, while simultaneously allowing multiple queues to be
associated with RSS contexts.
Flow rules share identical RSS contexts (hashed fields, hash key, target
queues) to save on memory and other resources. The trade-off is some added
complexity due to reference counters management on RSS contexts.
The QUEUE action is re-implemented on top of an automatically-generated
single-queue RSS context.
The following hardware limitations apply to RSS contexts:
- The number of queues in a group must be a power of two.
- Queue indices must be consecutive, for instance the [0 1 2 3] set is
allowed, however [3 2 1 0], [0 2 1 3] and [0 0 1 1 2 3 3 3] are not.
- The first queue of a group must be aligned to a multiple of the context
size, e.g. if queues [0 1 2 3 4] are defined globally, allowed group
combinations are [0 1] and [2 3]; groups [1 2] and [3 4] are not
supported.
- RSS hash key, while configurable per context, must be exactly 40 bytes
long.
- The only supported hash algorithm is Toeplitz.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Implement promiscuous and all multicast through internal flow rules
automatically generated according to the configured mode.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Give users the ability to create flow rules that match all multicast
traffic. Like promiscuous flow rules, they come with restrictions such as
not allowing additional matching criteria.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit brings back VLAN filter configuration support without any
artificial limitation on the number of simultaneous VLANs that can be
configured (previously 127).
Also thanks to the fact it does not rely on fixed per-queue arrays for
potential Verbs flow handle storage anymore, this version wastes a lot less
memory (previously 128 * 127 * pointer size, i.e. 130 kiB per Rx queue,
only one of which actually had any use for this room: the RSS parent
queue).
The number of internal flow rules generated still depends on the number of
configured MAC addresses times that of configured VLAN filters though.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit brings back support for configuring up to 128 MAC addresses on
a port through internal flow rules automatically generated on demand.
Unlike its previous incarnation, the necessary extra flow rule for
broadcast traffic does not consume an entry from the MAC array anymore.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add a new offload capability flag for Rx HW
timestamp and enabling/disabling this via rte_eth_rxmode.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Add support for both per queue and overall basic statistics.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add support for crc offload and l3/l4 checksum offloads.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Return supported link speed capabilities via rte_dev_info_get().
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add support for retrieving physical link information i.e:
speed, duplex and link status.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Support same functionalities as in
commit cf521eaa3c76 ("net/mlx5: remove flow director support")
This implementation is done on top of the generic flow API.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Generic flow API should be use for flow steering as is provides a better
and easier way to configure flows.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Mark packet type parsing in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark "Queue start/stop" as P as its been implemented only for tx queue.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Implement "mac_addr_set" op and mark "Unicast MAC filter" feature as "P"
as "mac_addr_add" and "mac_addr_remove" are not implemented.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Basic stats support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Promiscuous mode in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Link status in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
mark Jumbo frame, CRC offload support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Add operations that are safe for secondary processes:
* (x)stats
* device info get
* rx/tx descriptor status
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
As described in API documentation, the field hw_ip_checksum
requests both L3 and L4 offload.
Fixes: dad1ec72a377 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
PMDs which expose this offload cap supports optimization for fast release
of mbufs following successful Tx.
Such optimization requires that per queue, all mbufs come from the same
mempool and has refcnt = 1.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Tx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_TX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
In addition the Tx offloads will be disabled by default and be
enabled per application needs. This will much simplify PMD management of
the different offloads.
Applications should set the ETH_TXQ_FLAGS_IGNORE flag on txq_flags
field in order to move to the new API.
The old Tx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Rx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_RX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
Applications should set the ignore_offload_bitfield bit on rxmode
structure in order to move to the new API.
The old Rx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
