Pre-registering mbuf memory pools when creating TX queues avoids costly
registrations later in the data path.
Fixes: 2e22920b85d9 ("mlx5: support non-scattered Tx and Rx")
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Pre-registering mbuf memory pools when creating TX queues avoids costly
registrations later in the data path.
Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Buffers with too many segments are linearized to overcome
MLX5_PMD_SGE_WR_N, unfortunately the last segment is never sent.
Fixes: 3ee8444608a9 ("mlx5: support scattered Rx and Tx")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Buffers with too many segments are linearized to overcome
MLX4_PMD_SGE_WR_N, unfortunately the last segment is never sent.
Fixes: be11b35817e0 ("mlx4: move scattered Tx processing to helper function")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Indirect mbuf data may come from a different mempool which must be
registered separately as another memory region, otherwise such mbufs cannot
be sent.
Fixes: 2e22920b85d9 ("mlx5: support non-scattered Tx and Rx")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Indirect mbuf data may come from a different mempool which must be
registered separately as another memory region, otherwise such mbufs cannot
be sent.
Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A typo causes TX stats indices to be retrieved from RX queues.
Fixes: 87011737b715 ("mlx5: add software counters")
Reported-by: Nicolas Harnois <nicolas.harnois@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A typo causes TX stats indices to be retrieved from RX queues.
Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
Reported-by: Nicolas Harnois <nicolas.harnois@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
CXGBE PMD depends on an alarm to periodically transmit any pending
coalesced packets and hence spins for a lock for each tx queue in the
alarm callback.
A better solution is to try to get a lock whenever possible, instead
of spinning for it.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Most dpdk examples and apps seem to initialize with a minimum of 128 rx
descriptors and 512 tx descriptors for queue setup. However, CXGBE PMD
enforces a minimum of 1024 descriptors. This causes the dpdk stack
to return -EINVAL because the apps do not request the minimum required.
The fix is to relax this enforcing in CXGBE PMD. A minimum of 128
descriptors seems to be a good number with the least impact on the
performance.
Fixes: 946c9ed95616 ("cxgbe: get descriptor limits")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
The vector number may change during 'dev_start'. Before enabling a new vector mapping,
it's necessary to disable/unmap the previous setting.
Fixes: 7ab8500037f6 ("ixgbe: fix VF start with PF stopped")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector number may change during 'dev_start'.
Before enabling a new vector mapping,
it's necessary to disable/unmap the previous setting.
Fixes: fe685de2b1b6 ("igb: fix VF start with PF stopped")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
fm10k driver will meet compile error on non-x86 platforms due to
SSE instructions. Original implementation didn't have switch to
turn off vPMD.
The improvement introduces a macro to turn on/off vPMD functions,
it's on by default. On non-x86 platforms, it can simply be turned
off to fix compile issue.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
When the fm10k port is closed, both func tx_queue_clean() and
fm10k_tx_queue_release_mbufs_vec() will try to release buffer in
SW ring. The latter func won't do sanity check on those pointers
and cause crash.
The fix removed Vector TX buffer release func since it can share
the release functions with regular TX.
Fixes: fb9066e479a6 ("fm10k: reset and release mbuf for vector Tx")
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
vlan_tci should be copied from RX descriptor to mbuf,
and flag PKT_RX_VLAN_PKT should be set for every RX packet,
this patch fixes this issue.
Packets in fm10k device always carry at least one VLAN tag.
For those packets coming in without VLAN tag,
the port default VLAN tag will be used.
So in fm10k, always PKT_RX_VLAN_PKT flag is set and vlan_tci
is valid for each RX packet's mbuf.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
For i40e vf driver, should use I40EVF_WRITE_FLUSH to flush
configuration but not I40E_WRITE_FLUSH. This patch fixed this issue.
Fixes: be6c228d4da3 (i40evf: support Rx interrupt)
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If DCB is not enabled, the BW info is not stored for VSI. This
patch fixes this issue by merging functions i40e_vsi_dump_bw_config
and i40e_vsi_get_bw_info together.
Fixes: c8b9a3e3fe1b (i40e: support DCB mode)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When NVM version is updated to 5.x, DCB can not be configured. This
issue is because of the FW version validation is not correct.
This patch fixed this issue.
Fixes: c8b9a3e3fe1b (i40e: support DCB mode)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yulong Pei <yulong.pei@intel.com>
As firmware does not support any link control from software driver
side, any phy config should be ignored as a workaround. Otherwise
the link might not be up again after binding back to kernel driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
It fixes the issue of not re-configuring hash enable flags (HENA)
if there is no key.
Fixes: d0a349409bd7 ("i40e: support AQ based RSS config")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch removes the crc bytes from byte counter statistics.
Doing so fixes a bug that CRC bytes were included on TX but not
on RX, causing mismatch of bytes received / sent.
Fixes: 9aace75fc82e ("i40e: fix statistics")
Reported-by: Weichun Chen <weichunx.chen@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes the crc bytes from byte counter statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes the crc bytes from byte counter statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This fixes a bug added to em and igb drivers which causes the pci info
seen by the primary process to become invalidated by secondary process
startup.
This call was added after the process type check in the other drivers.
Fixes: eeefe73f0af1 ("drivers: copy PCI device info to ethdev data")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When freeing the device it is also neccesary to free
rx_queues and tx_queues
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Issue: l3fwd app need the ptype in the mbuf to forward the packets properly.
But now some drivers like virtio driver and FVL vPMD will not set the ptype
in mbuf, so l3fwd cannot work properly on that kind of drivers.
Configure the vector PMD option as no for default as a work around for l3fwd.
After the l3fwd app can handle the undefined ptype or the i40e vPMD can
return the ptype, the option will be set as yes for default again.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add a sanity check for number of tx descriptors requested during tx
queue setup. Return -EINVAL if the number requested does not meet
the tx descriptor requirements of the device.
Fixes: 80a1deb4c77a ("ethdev: add API to retrieve queue information")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It prevents some drivers to load:
undefined symbol: rte_eth_dma_zone_reserve
Fixes: 719dbebceb81 ("xen: allow determining DOM0 at runtime")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Not all filesystems supply struct dirent d_type field, in which case
everything in the specified directory would go ignored. One such
filesystem being XFS which RHEL 7 defaults to... stat() the entries
instead.
Fixes: 9f8eb1d9ca0f ("eal: support driver loading from directory")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
The added error checking on plugin initialization in
commit 9f8eb1d9ca0f56d6292db5858c52e6873d0abe51 broke the ability of
loading plugins by their basename from default linker locations.
Only use stat() for directory discovery and leave error handling
to dlopen() to restore former behavior.
Fixes: 9f8eb1d9ca0f ("eal: support driver loading from directory")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
No need for those forward declarations (which breaks build when asking for
C++11 or adding pedantic flag).
Signed-off-by: David Marchand <david.marchand@6wind.com>
It does not build with every C++ compilers.
Reverts the _UNDERLYING_TYPE workarounds to prepare
for another fix in the next patch.
Fixes: 621389bbbe08 ("eal: fix C++ app build")
Signed-off-by: David Marchand <david.marchand@6wind.com>
CLOCK_MONOTONIC_RAW added in glibc 2.12, using this define in older
glibc versions cause compile error:
'error: identifier "CLOCK_MONOTONIC_RAW" is undefined'
This patch replaces "CLOCK_MONOTONIC_RAW" with "CLOCK_MONOTONIC" for
older glibc versions, versions that support "CLOCK_MONOTONIC_RAW"
will keep using this clock type.
Fixes: d08d304508a8 ("eal/linux: make alarm not affected by system time jump")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.
Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.
Signed-off-by: Matej Vido <matejvido@gmail.com>
When using a linker option not known by the compiler like -rpath,
the library linkage was failing.
It is fixed by prefixing the option with -Wl, as it is done in other
makefiles.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch changes the ICC conditional check to disable
-no-inline-max-size and -no-inline-max-total-size to be
for all versions of icc greater than 14 and not just for version 15.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
On HSW box with icc 16.0.0 build for x86_64-native-linuxapp-icc fails with:
icc: command line warning #10120: overriding '-march=native' with '-msse4.1'
...
dpdk.org/x86_64-native-linuxapp-icc/include/rte_memcpy.h(96): error: identifier "__m256i" is undefined
The reason is that icc treats "-march=native ... -msse4.1"
in a different way, then gcc and clang.
For icc it means override all flags enabled with
'-march=native' with '-msse4.1'.
Even when '-march=native' is a superset for '-msse4.1'.
To overcome the problem add a check is SSE4.1 compilation flag already enabled.
If yes, then no need to add '-msse4.1'
Similar change for avx2 compilation option.
Fixes: 074f54ad03ee ("acl: fix build and runtime for default target")
Reported-by: Declan Doherty <declan.doherty@intel.com>
Reported-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Adds functions for detecting and reporting the live-ness of LCores,
the primary requirement of which is minimal overheads for the
core(s) being checked. Core failures are notified via an application
defined callback.
Signed-off-by: Remy Horton <remy.horton@intel.com>
It fixes the compile issue on kernel version 2.6.32 or old ones.
Error logs:
lib/librte_eal/linuxapp/kni/kni_misc.c:121: error: unknown field id specified in initializer
lib/librte_eal/linuxapp/kni/kni_misc.c:121: error: excess elements in struct initializer
lib/librte_eal/linuxapp/kni/kni_misc.c:121: error: (near initialization for kni_net_ops)
lib/librte_eal/linuxapp/kni/kni_misc.c:122: error: unknown field size specified in initializer
lib/librte_eal/linuxapp/kni/kni_misc.c:122: error: excess elements in struct initializer
lib/librte_eal/linuxapp/kni/kni_misc.c:122: error: (near initialization for kni_net_ops)
Fixes: 72a7a2b2469e ("kni: allow per-net instances")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
/proc/version_signature is the version for the host machine, but in
e.g., chroots, this does not necessarily match that DPDK is built
for. DPDK will then build for the wrong kernel version - that of the
server, and not that installed in the (build) chroot.
The patch uses utsrelease.h from the kernel sources instead and fakes
the upload version.
Tested on a server with Ubuntu 12.04, building in a chroot for Ubuntu
14.04.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Johan Faltstrom <johan.faltstrom@netinsight.net>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Commit 36080ff96b0e causes compiling error on tile, as tile
does not support KNI, so we disable the CONFIG_RTE_KNI_KMOD.
Fixes: 36080ff96b0e ("config: add KNI kmod option")
Reported-by: Guo Xin <gxin@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
This commit introduce rte_smp_mb(), rte_smp_wmb() and rte_smp_rmb(), in
order to enable memory barriers between lcores.
The patch does not provide any functional change for IA, the goal is to
have infrastructure for weakly ordered machines like ARM to work on DPDK.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Created the new thunderx machine target to address difference
in "cache line size" and "-mcpu=thunderx" vs default armv8-a machine target
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The implementation uses NEON gcc intrinsic.
Verified with testacl and acl_autotest applications on arm64 architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
