Current l2fwd-event application statically configures adjacent ports as
destination ports for forwarding the traffic.
Add a config option to pass the forwarding port pair mapping which allows
the user to configure forwarding port mapping.
If no config argument is specified, destination port map is not
changed and traffic gets forwarded with existing mapping.
To align port/queue configuration of each lcore with destination port
map, port/queue configuration of each lcore gets modified when config
option is specified.
Ex: ./l2fwd-event -c 0xff -- -p 0x3f -q 2 --config="(0,3)(1,4)(2,5)"
With above config option, traffic received from portid = 0 gets forwarded
to port = 3 and vice versa, similarly traffic gets forwarded on other port
pairs (1,4) and (2,5).
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Added cpu-crypto fallback option parsing as well as tests for it
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reserve minimum number of crypto queues equal to number of ports.
This is to fulfill inline protocol offload requirements.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Make number of buffers in a pool nb_mbuf_in_pool dependent on number
of ports, cores and crypto queues. Add command line option -s which
when used overrides dynamic calculation of number of buffers in a pool.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add driver inbound and outbound worker thread for ipsec-secgw. In driver
mode application does as little as possible. It simply forwards packets
back to port from which traffic was received instructing HW to apply
inline security processing using first outbound SA configured for
a given port. If a port does not have SA configured outbound traffic
on that port will be silently dropped. The aim of this mode is to
measure HW capabilities. Driver mode is selected with single-sa option.
The single-sa option accepts SA index however in event mode the SA
index is ignored.
Example command to run ipsec-secgw in driver mode:
ipsec-secgw -w 0002:02:00.0,ipsec_in_max_spi=128
-w 0002:03:00.0,ipsec_in_max_spi=128 -w 0002:0e:00.0 -w 0002:10:00.1
--log-level=8 -c 0x1 -- -P -p 0x3 -u 0x1 -f aes-gcm.cfg
--transfer-mode event --event-schedule-type parallel --single-sa 0
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add eventmode support to ipsec-secgw. With the aid of event helper
configure and use the eventmode capabilities.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add eventmode helper eh_conf_init and eh_conf_uninit
functions which purpose is to initialize and
uninitialize eventmode helper configuration.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for Rx and Tx internal ports. When internal ports are
available then a packet can be received from eth port and forwarded
to event queue by HW without any software intervention. The same
applies to Tx side where a packet sent to an event queue can by
forwarded by HW to eth port without any software intervention.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In eventmode workers can be drafted differently according to the
capabilities of the underlying event device. The added functions will
receive an array of such workers and probe the eventmode properties to
choose the worker.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add routines to display the eventmode configuration and provide
an overview of the devices used.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Tx adapter support. The event helper init routine will initialize
the Tx adapter according to the configuration. If Tx adapter config
is not present it will generate a default config.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Rx adapter support. The event helper init routine will initialize
the Rx adapter according to the configuration. If Rx adapter config
is not present it will generate a default config. If there are enough
event queues available it will map eth ports and event queues 1:1
(one eth port will be connected to one event queue). Otherwise it
will map all eth ports to one event queue.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add event device port-lcore link and specify which event queues should
be connected to the event port. Generate a default config for event
port-lcore links if it is not specified in the configuration. This
routine will check the number of available ports and then create links
according to the number of cores available. This patch also adds a new
entry in the eventmode conf to denote that all queues are to be linked
with every port. This enables one core to receive packets from all
ethernet ports.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add framework for eventmode helper. Event mode involves
initialization of multiple devices like eventdev, ethdev
and etc. Add routines to initialize and uninitialize event
device. Generate a default config for event device if it
is not specified in the configuration. Currently event
helper supports single event device only.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The default flow created would enable security processing on all ESP
packets. If the default flow is created, SA based rte_flow creation
would be skipped.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
GCC 10 defaults to -fno-common, this means a linker error will now be
reported if the same global variable is defined in more than one
compilation unit.
Fixes: be1e533238c0 ("examples/qos_sched: add TC and queue config flexibility")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
GCC 10 defaults to -fno-common, this means a linker error will now be
reported if the same global variable is defined in more than one
compilation unit.
Fixes: 3d1b33e44ae2 ("examples/eventdev: move common data into pipeline common")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
GCC 10 defaults to -fno-common, this means a linker error will now be
reported if the same global variable is defined in more than one
compilation unit.
Fixes: c19beb3f38cd ("examples/vhost_blk: introduce vhost storage sample")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch adds top level SPDX license identifiers for some of the DPDK
source and scripts, where the copyright owners have not yet agreed to
replace the full BSD-3 license plate.
This patch also add SPDX license tag for a file with no
previous license plates. (DPDK is BSD-3)
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Removed redundant function call of 'rte_eth_dev_info_get()' since it has
already been called earlier.
Coverity issue: 349922
Fixes: 2bb43bd4350a ("examples/tep_term: add TSO offload configuration")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The NIST test vectors use the string 'PTlen' to denote text lengths
in case of encrypt & decrypt operations. So the same string needs to be
used while parsing PT and CT.
Fixes: 2adb3b4e7e54 ("examples/fips_validation: fix AES-GCM cipher length parsing")
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch extends creation of inline session to all the algorithms.
Previously the inline session was enabled only for AES-GCM cipher.
Fixes: 3a690d5a65e2 ("examples/ipsec-secgw: fix first packet with inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The name of the static function check_cryptodev_capablity()
is fixed for the word "capability".
There is no functional change.
The same typo is fixed in a comment in ip_fragmentation example.
Fixes: 05fe65eb66b2 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The functions to lookup IPv4 and IPv6 were both using opaque
pointers (void *) when they should use a typed pointer instead.
The IP headers are not modified during lookup.
Get rid of unnecessary cast on the return from the function.
Replace complex trigraph expression with simple if to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The initial route setup array is unmodified by the lpm code
and can be made constant. This depends on earlier patch to
fix the rte_lpm6 to use const.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Skip master lcore when assigning cores to rx_queues as it is only used
to print stats.
Fixes: 4ff457986f76 ("examples/l2fwd-event: add default poll mode routines")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix the time of check time of use warning in example code.
Ignore the errno of unlink failure. There are two situations.
The first one is that file doesn't exist the unlink fails and
it's ok to ignore. The second one is that unlink fails to remove
file but the next bind() would fail too.
Coverity issue: 350589, 158663
Fixes: c19beb3f38cd ("examples/vhost_blk: introduce vhost storage sample")
Cc: stable@dpdk.org
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add missing BSD-3 license tag to inline fallback testing scripts.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the cipher len keyword typo.
Fixes: 07f5e4553293 ("examples/fips_validation: fix cipher length for AES-GCM")
Suggested-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Since all related queues' interrupts are turned on before epoll, we need
to turn off all the interrupts after wakeup. This patch fixes the issue
of only turning off the interrupted queues.
Fixes: b736d64787fc ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Liang Ma <liang.j.ma@intel.com>
Tested-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
SIGTERM handling is added for graceful application exit.
Useful when application is terminated without specifying
any signal on 'kill' command.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a VM sends a command through virtio-serial to enable/disable
turbo, it is successfully enabled or disabled, yet the response to the
VM is NACK. This is because all the library frequency change APIs return
1 for success (change in frequency), 0 for success (no change in
frequency) and -1 for failure. However the turbo enable/disable APIs just
return 0 for success and -1 for failure.
Fix the handling of the return code to treat ">= 0" as success, and
send an ACK. Only send NACK when < 0 (failure).
Fixes: 0de94bcac7fc ("examples/vm_power: send confirmation cmd to guest")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Lei Yao <lei.a.yao@intel.com>
The return value of the get link function call was not checked, and
could return a negative value indicating a failure. This meant the
link_status of the link being checked is invalid, because the link was
not filled with data. The return value is now checked, and if the return
value is not 0 for success, the loop continues with the next port.
To avoid confusion between variable names, the existing retval variable
is renamed to link_status, to better represent its use.
Coverity issue: 350348
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The nb_dq return value from the ioat dequeue is negative in failure
cases, however the variable was an unsigned int, causing the condition
where nb_dq <= 0 to never be true. This is now cast to a signed int,
which will successfully reflect the -1 value to be used in this
conditional check.
Coverity issue: 350342
Coverity issue: 350349
Fixes: 92c981637ffc ("examples/ioat: handle failure case for ioat dequeue")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
patch checks the return value of function rte_eth_dev_info_get,
if return value is negative error message printed on the console.
Coverity issue: 350361
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Cc: stable@dpdk.org
Signed-off-by: Praveen Shetty <praveen.shetty@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This checks the return value from the function
rte_eth_dev_set_vlan_offload.
Coverity issue: 350358
Fixes: bda68ab9d1e7 ("examples/ethtool: add user-space ethtool sample application")
Cc: stable@dpdk.org
Signed-off-by: Gargi Sau <gargi.sau@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Enable cpu-crypto mode testing by adding dedicated environmental
variable CRYPTO_PRIM_TYPE. Setting it to 'type cpu-crypto' allows
to run test scenario with cpu crypto acceleration.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Add support for CPU accelerated crypto. 'cpu-crypto' SA type has
been introduced in configuration allowing to use abovementioned
acceleration.
Legacy mode is not currently supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
AES XTS support is added to fips application. Parse test-vectors
from input files, populate AES XTS tests and prepare AES XTS
operations for fips validation.
Signed-off-by: Abed Kamaluddin <akamaluddin@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>
Cipher length need to be updated in case of AES-GCM decryption.
Fixes: 4aaad2995e13 ("examples/fips_validation: support GCM parsing")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Set mbuf ptype in prepare_one_packet() after parsing ether_type.
Use mbuf ptype after to recognize packet's address family.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Introduce SAD cache.
Stores the most recent SA in a per lcore cache.
Cache represents flat array containing SA's indexed by SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Get rid of maximum SP limitation.
Keep parsed SP's into the sorted by SPI value array.
Use binary search in the sorted SP array to find appropriate SP
for a given SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Get rid of maximum SA limitation.
Keep parsed SA's into the sorted by SPI value array.
Use binary search in the sorted SA array to find appropriate SA
for a given SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Integrate ipsec SAD support into secgw app:
1. Use SAD library for inbound SA lookup
2. Changes in struct sa_ctx:
- sa array allocates dynamically depending on number of configured sa
- All SA's are kept one by one without using SPI2IDX
3. SP's userdata now contain index of SA in sa_ctx instead of SPI
4. Get rid of SPI2IDX macro
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Add initial support for librte_ipsec SAD library
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
