PCIe functions have static MPORTs which can be utilised by
MAE rules as delivery destinations for matching traffic.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This makes existing code clearer. Also, it will be used by a later patch.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This action can be added at any point before DELIVER.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This action can be added at any point before DELIVER.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MAE supports pushing two tags, so this action can
be requested once or twice.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MAE supports stripping two tags, so this action can
be requested once or twice.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The patch adds APIs for action set allocation / release.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce a mechanism for adding actions to an action set and
add support for DELIVER action.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MCDI-compatible enumeration for these fields and
provide necessary mappings for them to be inserted
directly into mask-value pairs buffer.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add an API for setting mask-value pairs in a match specification
structure and add support for MAE field INGRESS_PORT of type PPORT.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The engine is only able to carry out chosen actions on matching packets in
a strict order. No MCDI exists to identify supported actions and the order.
Still, the definition of the latter is available from the FW documentation.
The general idea is to define an action specification structure and supply
a client driver with APIs for adding actions individually, order-dependent.
A client driver is supposed to invoke an API on every action passed by the
application, and if an out-of-order action follows, the API will reject it.
Add an action set specification stub and supply initialise / finalise APIs.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
From MAE standpoint, a flow rule belongs to some class. Field capabilities
advertised by the FW provide a hint on whether changing a particular match
field value or its mask will affect the class of the rule. A client driver
can make use of the concept of a class by comparing a rule being validated
with already inserted ones so that if an existing rule with the same class
is encountered, it will become possible to skip making an explicit request
to the FW because the class of an already inserted rule is wittingly valid.
Implement an API for client drivers to carry out the said class comparison.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MAE has restrictions on what kind of mask a particular field can have in
a match specification. Add an API for client drivers to check
specifications.
The patch defines a field description list, whilst the list itself is
left empty. This is to provide a general idea of how field properties
will be used to validate a match specification. Particular fields
will be added to the list by follow-up patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
An MAE rule is a function of match criteria and a priority. The said match
criteria have to be provided using "mask-value pairs" packing format which
on its own should not be exposed to client drivers. The latter have to use
a functional interface of sorts in order to generate a match specification.
Define an EFX match specification and implement initialise / finalise APIs.
The "mask-value pairs" buffer itself is not used in this particular patch,
so the corresponding struct member will be added in the follow-up patch.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add an API for client drivers to query the engine limits.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
These actions affect MAE supplementary resources which are
libefx-internal.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The patch adds APIs for client drivers to initialise / finalise
MAE-specific context in NIC control structure. The context
itself will be used by the follow-up patches to store
supportive data for library-internal consumers.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead boards maintain support for MAE, a low-level Match-Action
Engine.
The feature is documented in SF-122526-TC.
The new field will help client drivers to test NIC support for MAE
status.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MAE stands for Match-Action-Engine and will be used to
support rte_flow API transfer rules.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Since the drivers in the common directory can be processed out of order, in
this case following the "bus" directory, we can simplify somewhat the build
of the QAT driver to be done entirely from the "common/qat" folder rather
than having it's build distributed across 3 folders.
This also opens up the possibility of building the QAT driver with crypto
only and the compression part disabled. It further allows more sensible
naming of the resulting shared library in case of standardizing library
names based on device class; i.e. common_qat is more descriptive for a
combined crypto/compression driver than either of the other two prefixes
individually.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Currently there are limitations in the virthcnl.h interface that only
allow a maximum of 16 queues to be used by a VF driver. Add support in
virtchnl.h to allow a VF driver to request >16 queues. Also, the RSS
qregion size is currently assumed to be the max number of queues a VF
can request and/or is given on initialization. With larger VFs this
assumption can no longer be made, so add a new op to support querying
the max RSS qregion size.
In order to request more queues than the initially given queues the VF
driver needs to use the VIRTCHNL_OP_REQUEST_QUEUES opcode.
The VF is given more >16 queues it should use the new
VIRTCHNL_OP_GET_MAX_RSS_QREGION to determine its max qregion size. This
is needed to correctly configure the RSS LUT and/or configure filters
based on queue base/offset and queue region size.
If the VF is configuring >16 queues it should use the following opcodes
to configure the qeueus and interrupts after successfully requesting
them.
VIRTCHNL_OP_MAP_QUEUE_VECTOR
VIRTCHNL_OP_ENABLE_QUEUES_V2
VIRTCHNL_OP_DISABLE_QUEUES_V2
Also, add support in virtchnl_vc_validate_vf_msg() to validate the above
messages. As a part of this move the virtchnl_vector_limits enumeration
directly above the function it's used.
The patch also update base code release version in readme.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The new DR destination array action is supported since the
rdma-core version v32.
Destination array action is used group DR actions to a single action,
And it can be used for mirroring packet and forward to every
destination (port or queue) in the array.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Update function mlx5_devx_cmd_query_hca_attr() to add the NIC Flow
Table attributes query, then get the log_max_flow_sampler_num from
flow table properties.
Add the related structs definition in mlx5_prm.h.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The new DR sample action is supported since OFED version
5.1.2 or rdma-core version v32.
MLX5 PMD adds the rdma-core command in glue to create this action.
Sample action is used for creating the sample object to implement
the sampling/mirroring function.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
A new function allows to check if used Rx prefix layout matches
available Rx prefix layout. Length check is out-of-scope of the
function and caller should ensure length is either checked or
different length with everything required in place is handled
properly.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When Rx queue is created, allow to specify if the driver would like
to get RSS hash value calculated by the hardware.
Use the flag to choose Rx prefix on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce an extra variable with required Rx prefix fields mask
to make it easier to request more fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Control window is required to talk to NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead QDMA has limitation on maximum number of Rx scatter
buffers to be used by a packet. If the limitation is violated,
the datapath is dead. FW should ensure that it is OK, but
drivers need to know the limitation anyway to check parameters
when Rx queues are configured and MTU is set.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead does not support LED control yet. It is perfectly
fine to ignore LED set failure because of no support if
configured LED mode is the default.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
For consistency it is better to have separate MCDI wrappers.
Make efx_phy_led_mode_t visible even if EFSYS_OPT_PHY_LED_CONTROL
is disabled to be able to use it in the added wrapper arguments.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Make ef10_phy_reconfigure() simpler to read and less error-prone.
Avoid confusing case when two MCDI's are called from one function.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Issue has been observed in case of multi segments where mbuf
data gets corrupted due to missing barriers. Changes made to
mbuf just before LMTST by one core gets updatded when the
same mbuf is in use by another core, leading to corruption.
It should be ensured that all changes made to mbuf should be
written before LMTST.
Fixes: cbd5710db4 ("net/octeontx2: add Tx multi segment version")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
In the op new mode of crypto adapter, the completed crypto operation
is submitted to the event device by the OCTEON TX2 crypto PMD.
During event device dequeue the result of crypto operation is checked.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The SDAP is a protocol in the LTE stack on top of PDCP. It is
dedicated to QoS.
The difficulty of implementing this protocol is because the
PDCP change behavior regarding encryption and authentication
of the SDU it receives. In effect PDCP shall not encrypt the
SDAP SDU but must authenticate it (when encryption and
authentication is enabled).
The current version of SEC does not support the SDAP and the
change of behavior of PDCP prevent the use of the PDCP
protocol command available.
The way to do it is to reuse the PDCP implementation but to
not use the PDCP protocol and to have descriptors which
performs the PDCP protocol.
It is implemented by doing small changes of code:
#ifdef SDAP_SUPPORT
length += SDAP_BYTE_SIZE;
offset -= SDAP_BYTE_SIZE;
#endif
after having computed the size of the SN to read from the
input data, then
#ifdef SDAP_SUPPORT
MATHI(p, MATH0, LSHIFT, 8, MATH1, 8, 0);
MATHB(p, MATH1, AND, sn_mask, MATH1, 8, IFB | IMMED2);
#else
MATHB(p, MATH0, AND, sn_mask, MATH1, 8, IFB | IMMED2);
#endif
It will keep the SN and the SDAP header in MATH0, then shift
it to remove the SDAP header and store the result in MATH1.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
In case of LX2160 or SEC ERA >= 10, max anti replay window
size supported is 1024. For all other versions of SEC, the
maximum value is capped at 128 even if application gives
more than that.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Yi Liu <yi.liu@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
added support for non-HMAC for auth algorithms
(SHA1, SHA2, MD5).
Corresponding capabilities are enabled so that test
application can enable those test cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
HMAC/HASH opcode algorithms supports fixed mac length.
Allowed session creation to fail when requested for
unsupported MAC length for HMAC/HASH-only use cases.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
This patch syncs the pmd mailbox with the cpt pf driver.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
RTE_ARCH_xx flags are used to distinguish platform architectures.
These flags can be used to pick different code paths for different
architectures at compile time.
For Arm platforms, there are 3 flags in use: RTE_ARCH_ARM,
RTE_ARCH_ARMv7 and RTE_ARCH_ARM64.
RTE_ARCH_ARM64 is for 64-bit aarch64 platforms,
and RTE_ARCH_ARM & RTE_ARCH_ARMv7 are for 32-bit platforms.
RTE_ARCH_ARMv7 is for ARMv7 platforms as its name suggested.
The issue is meaning of RTE_ARCH_ARM is not clear enough.
Because no info about platform word length is included in the name.
To make the flag names more clear, a naming scheme is proposed.
RTE_ARCH_ARM (all Arm platforms)
|
+----RTE_ARCH_32 (New. 32-bit platforms of all architectures)
| |
| +----RTE_ARCH_ARMv7 (ARMv7 platforms)
| |
| +----RTE_ARCH_ARMv8_AARCH32 (aarch32 state on aarch64 machine)
|
+----RTE_ARCH_64 (64-bit platforms of all architectures)
|
+----RTE_ARCH_ARM64 (64-bit Arm platforms)
RTE_ARCH_32 will be explicitly defined for 32-bit platforms.
To fit into the new naming scheme, current usage of RTE_ARCH_ARM in
project is mapped to (RTE_ARCH_ARM && RTE_ARCH_32).
Matching flags for other architectures are:
RTE_ARCH_X86
|
+----RTE_ARCH_32
| |
| +----RTE_ARCH_I686
| |
| +----RTE_ARCH_X86_X32
|
+----RTE_ARCH_64
|
+----RTE_ARCH_X86_64
RTE_ARCH_PPC_64 ---- RTE_ARCH_64
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Performance improvement: use a write combining store
instead of a regular mmio write to update queue tail
registers.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
