The log should display the value, not the ID.
Fixes: e21df4b062 ("test/eventdev: add SW xstats tests")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The issue is seen by unit tests:
MALLOC_PERTURB_=204 \
DPDK_TEST=eventdev_selftest_sw \
/root/dpdk/x86_64-native-linuxapp-gcc/app/test/dpdk-test -c 0xff
(...)
*** Running XStats ID Reset test...
12: 1761: qid_0_port_2_pinned_flows value , expected 1 got 7
1778: qid_0_port_2_pinned_flows value incorrect, expected 1 got 7
ERROR - XStats ID Reset test FAILED.
SW Eventdev Selftest Failed.
Test Failed
The flow ID is not set in the event, which results in an undefined
flow, whose value depends on what was previously in stack. Having
different flows for the packets makes the test to fail, since only one
flow is expected.
This only happens in -O3, where the same stack area is shared by the
event object and the address of the mbuf allocated in rte_gen_arp().
Fix this by properly initializing the flow id.
Bugzilla ID: 1101
Fixes: e21df4b062 ("test/eventdev: add SW xstats tests")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Increase xstats ID width from 32 to 64 bits. This also
fixes the xstats ID datatype discrepancy between reset and
rest of the xstats family.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enabled software PMDs in IOVA as PA disabled build
as they work with IOVA as VA.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Have the SW event device conform to the service core convention, where
-EAGAIN is return in case no work was performed.
Prior to this patch, for an idle SW event device, a service lcore load
estimate based on RTE_SERVICE_ATTR_CYCLES would suggest 48% core
load.
At 7% of its maximum capacity, the SW event device needs about 15% of
the available CPU cycles* to perform its duties, but
RTE_SERVICE_ATTR_CYCLES would suggest the SW service used 48% of the
service core.
After this change, load deduced from RTE_SERVICE_ATTR_CYCLES will only
be a minor overestimation of the actual cycles used.
* The SW scheduler becomes more efficient at higher loads.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add support to configure and use periodic event timers in
software timer adapter.
The structure ``rte_event_timer_adapter_stats`` is extended
by adding a new field, ``evtim_drop_count``. This stat
represents the number of times an event_timer expiry event
is dropped by the event timer adapter.
Updated the software eventdev pmd timer_adapter_caps_get
callback function to report the support of periodic
event timer capability.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
The software eventdev PMD reports todo-fix-name as the
device name.
Fixes: c66baa68e4 ("event/sw: add dump function for easier debugging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The vdev bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Found by nullfree.cocci.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[David: for lpm parts:]
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
[David: for vdpa/mlx5 parts:]
Acked-by: Matan Azrad <matan@nvidia.com>
[David: for dma/dpaa2, raw/ifpga, vdpa/mlx5:]
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
[David: reran cocci.sh and updated common/mlx5 and cryptodev asym test]
Signed-off-by: David Marchand <david.marchand@redhat.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace RTE_EVENT_DEV_CAP_REQUIRES_MAINT, which signaled the need
for the application to call rte_event_maintain(), with
RTE_EVENT_DEV_CAP_MAINTENANCE_FREE, which does the opposite (i.e.,
signifies that the event device does not require maintenance).
This approach is more in line with how other eventdev hardware and/or
software limitations are handled in the Eventdev API.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reported by clang 13.
This patch removes the inflights variable from the sw_dump function
within the software section of the event driver as it is an unused but
set variable.
Bugzilla ID: 881
Fixes: c66baa68e4 ("event/sw: add dump function for easier debugging")
Cc: stable@dpdk.org
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
FINISHED state seems to be used to indicate that the worker's update
of the 'state' is not visible to other threads. There seems to be no
requirement to have such a state.
Since the FINISHED state is removed, the API rte_eal_wait_lcore
is updated to always return the status of the last function that
ran in the worker core.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
Hide rte_event_timer_adapter_pmd.h file as it is an internal file.
Remove rte_ prefix from rte_event_timer_adapter_ops structure.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Invoke event_dev_probing_finish() function at the end of probing,
this function sets the function pointers in the fp_ops flat array.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Mark all the driver specific functions as internal, remove
`rte` prefix from `struct rte_eventdev_ops`.
Remove experimental tag from internal functions.
Remove `eventdev_pmd.h` from non-internal header files.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Today it is difficult to know if the SW Eventdev PMD is making
forward progress when it runs an iteration of its service. This
commit adds two xstats to give better visibility to the application.
The new xstats provide an application with which Eventdev ports
received work in the last iteration of scheduling, as well if
forward progress was made by the scheduler.
This patch implements an xstat for the SW PMD that exposes a
bitmask of ports that were scheduled to. In the unlikely case
that the SW PMD instance has 64 or more ports, return UINT64_MAX.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
The rte_eventdev_pmd*.h files are for drivers only and should be private
to DPDK, and not installed for app use.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The eventdev drivers have been hacking the deprecated field seqn for
internal test usage.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
The test worker_loopback used the deprecated mbuf field udata64.
It is moved to a dynamic field in order to allow removal of udata64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.
The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.
Following is a detailed description of the changes that have been made.
1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.
struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/
uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}
2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.
/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}
3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.
* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)
/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/
#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/
struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}
This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add minimum burst throughout the scheduler pipeline and a flush counter.
Use a single threaded ring implementation for the reorder buffer free list.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Three warnings are commonly disabled in DPDK with make and meson:
* address-of-packed-member
always disabled
* missing-field-initializers
disabled with meson
disabled with make + clang or make + gcc < 4.7
disabled with make + gcc <= 5 for test files and event drivers
* packed-not-aligned
disabled with meson
This change is removing exceptions for missing-field-initializers.
As it is always disabled, some redundant configs are cleaned up.
Now the situation is:
* address-of-packed-member
always disabled
* missing-field-initializers
always disabled
* packed-not-aligned
disabled with meson
It could alternatively be decided to disable missing-field-initializers
only for old gcc (< 6).
The warning packed-not-aligned is not modified in this change.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The sw PMD implements xstats reset by having the xstat get operations
return a value to the statistic's value at the last reset. The value at the
last reset is maintained in the per-xstat reset_value field, but the PMD
was setting reset_value = current - reset_value instead of reset_value =
current.
Fixes: c1ad03df7a ("event/sw: support xstats")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Fixes: 371a688fc1 ("event/sw: support linking queues to ports")
Cc: stable@dpdk.org
Signed-off-by: Dilshod Urazov <dilshod.urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The functions rte_service_may_be_active(), rte_service_lcore_attr_get(),
and rte_service_attr_reset_all() were introduced nearly a year ago in DPDK
18.08. They can be considered non-experimental for the 19.08 release.
rte_service_may_be_active() is used by the sw PMD, and this commit allows
it to not need any experimental API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This patch fixes a number of instances of the same return
value mis-check, where previously we checked for a negative
return value as error, however the API returns an unsigned
integer, so these return value checks are invalid.
The rte_event_enqueue_burst() API returns the number of
events enqueued, so in order to identify the error case,
we must check for != the number of intended enqueues.
Fixes: cd1a9e3eab ("test/eventdev: add SW tests for load balancing")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a unit test that checks the behaviour
of the unlinks_in_progress() function, ensuring that the
returned values are the number of unlinks requested,
until the scheduler runs and "acks" the requests, after
which the count should be zero again.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a counter to each port, which counts the
number of unlinks that have been performed. When the scheduler
thread starts its scheduling routine, it "acks" all unlinks that
have been requested, and the application is gauranteed that no
more events will be scheduled to the port from the unlinked queue.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit fixes the cq index checks when unlinking
ports/queues while the scheduler core is running.
Previously, the == comparison could be "skipped" if
in particular corner cases. With the check being changed
to >= this is resolved as the cq idx gets reset to zero.
Bugzilla ID: 60
Fixes: 617995dfc5 ("event/sw: add scheduling logic")
Cc: stable@dpdk.org
Suggested-by: Matias Elo <matias.elo@nokia.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit also adds a flush callback test to the sw eventdev's selftest
suite.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch defines capabilities & functions to be called
for eventdev PMDs.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit adds the logic that is shared by all event timer adapter
drivers; the common code handles instance allocation and some
initialization.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
When an event device is stopped, it drains all event queues and ports.
These events may contain pointers, so to prevent memory leaks eventdev now
supports a user-provided flush callback that is called during the queue
drain process. This callback is stored in process memory, so the callback
must be registered by any process that may call rte_event_dev_stop().
This commit also clarifies the behavior of rte_event_dev_stop().
This follows this mailing list discussion:
http://dpdk.org/ml/archives/dev/2018-January/087484.html
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Previously, the sw PMD would enqueue either all or no events, depending on
if enough inflight credits were available for the new events in the burst.
If a port is enqueueing a large burst (i.e. a multiple of the credit update
quanta), this can result in suboptimal performance, and requires an
understanding of the sw PMD implementation (in particular, its credit
scheme) to tune an application's burst size.
This affects software that enqueues large bursts of new events, such as the
ethernet event adapter which uses a 128-deep event buffer, when the input
packet rate is sufficiently high.
This change makes the sw PMD enqueue as many events as it has credits, if
there are any new events in the burst.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
