The current approach detects the proxy port on each port (re-)plug and
may spam the log with error messages if the PMD does not support flows.
As testpmd is a debug tool, it must not do such implicit port handling.
Instead, the new API should be called only when the user requests that.
Revoke the existing code. Implement an explicit command-line primitive
to let the user find the proxy port themselves. Provide relevant hints.
Fixes: 1179f05cc9 ("ethdev: query proxy port to manage transfer flows")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
In case of shared Rx queue, source port mbuf from polling result isn't
the Rx port of forwarding stream. To provide original port ID, this
patch dumps mbuf->port for each packet in verbose mode if shared Rx
queue enabled.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The driver may change RSS hash offloads in dev->data->dev_conf
during dev_configure which may cause port->dev_conf and port->rx_conf
contain outdated values.
Since testpmd uses its configuration structures to display offloads
configuration, it doesn't display RSS hash offload.
This patch updates the testpmd offloads from device configuration
to fix this issue.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Not all DPDK ports in a given switching domain may have the
privilege to manage "transfer" flows. Add an API to find a
port with sufficient privileges by any port in the domain.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Definition of `rte_ether_addr` structure used a workaround allowing DPDK
and Windows SDK headers to be used in the same file, because Windows SDK
defines `s_addr` as a macro. Rename `s_addr` to `src_addr` and `d_addr`
to `dst_addr` to avoid the conflict and remove the workaround.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2021-July/215270.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Running with stdout suppressed or redirected for further processing
is very confusing in the case of errors. Fix it by logging errors and
warnings to stderr.
Since lines with log messages are touched anyway concatenate split
format strings to make it easier to search using grep.
Fix indent of format string arguments.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Add a new testpmd pattern field 'last_rsvd' that supports the
last 8-bits matching of VXLAN header.
The examples for the "last_rsvd" pattern field are as below:
1. ...pattern eth / ipv4 / udp / vxlan last_rsvd is 0x80 / end ...
This flow will exactly match the last 8-bits to be 0x80.
2. ...pattern eth / ipv4 / udp / vxlan last_rsvd spec 0x80
vxlan mask 0x80 / end ...
This flow will only match the MSB of the last 8-bits to be 1.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Raslan Darawsheh <rasland@nvidia.com>
When testpmd enabled the verbosity for the received packets, if two
packets were received at the same time, for example, sampling packet and
normal packet, the dump output of these packets may be overlapping due
to multiple core handling the multiple queues simultaneously.
The patch uses one string buffer that collects all the packet dump
output into this buffer and then printouts it at last, that guarantees
to printout separately the dump output per packet.
Fixes: d862c45b59 ("app/testpmd: move dumping packets to a separate function")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Mellanox owns Tilera and EZchip, so the copyrights can be converted.
At the same time, the license header is switched to SPDX tag format,
and a typo is fixed in another copyright line.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
DPDK now supports registration of dynamic flags (dynf) to the mbuf.
dynf can be given any name, and can be used with a supporting PMD or
supporting application.
Due to the generic concept of the dynf, it is impossible and
meaningless, to define register set/get function for each flag.
This commit introduce a generic way to register and set/clear such
flags.
The basic syntax:
port config <port id> dynf <name> <set|clear>
The first step the new flag is registered. Regardless if the action is
set or clear.
There is no way to unregister the flag, after registering it.
The second step, if the action is set then we set the requested flag.
If this is the first flag that is enabled we also register a call back
for the Tx. In this call back we set the flag.
If the action is clear the requested flag is cleared, and if there
are no more flags that are set, the call back is removed.
The reason that the set is only applied in Tx is that in case of Rx
it is assumed that the value comes from the PMD.
If log is enabled the name of the flag, and value will be printed
in the packet info.
In order for the log to work correctly the registration of the flag
must be done before setting verbose.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Commit in fixes tag removed the match_metadata Tx offload.
This patch removes the option to select this offload from testpmd
menu, help text and documentation.
It also modifies the cmd_show_tx_metadata_parsed() function, to
display the value correctly, and the dump_pkt_burst() function to
display the relevant (Tx/Rx) metadata only.
Fixes: 9bf26e1318 ("ethdev: move egress metadata to dynamic field")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Currently, metadata can be set on egress path via mbuf tx_metadata field
with PKT_TX_METADATA flag and RTE_FLOW_ITEM_TYPE_META matches metadata.
This patch extends the metadata feature usability.
1) RTE_FLOW_ACTION_TYPE_SET_META
When supporting multiple tables, Tx metadata can also be set by a rule and
matched by another rule. This new action allows metadata to be set as a
result of flow match.
2) Metadata on ingress
There's also need to support metadata on ingress. Metadata can be set by
SET_META action and matched by META item like Tx. The final value set by
the action will be delivered to application via metadata dynamic field of
mbuf which can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_RX_DYNF_METADATA flag will be set along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior to use SET_META action.
The availability of dynamic mbuf metadata field can be checked
with rte_flow_dynf_metadata_avail() routine.
If application is going to engage the metadata feature it registers
the metadata dynamic fields, then PMD checks the metadata field
availability and handles the appropriate fields in datapath.
For loopback/hairpin packet, metadata set on Rx/Tx may or may not be
propagated to the other path depending on hardware capability.
MARK and METADATA look similar and might operate in similar way,
but not interacting.
Initially, there were proposed two metadata related actions:
- RTE_FLOW_ACTION_TYPE_FLAG
- RTE_FLOW_ACTION_TYPE_MARK
These actions set the special flag in the packet metadata, MARK action
stores some specified value in the metadata storage, and, on the packet
receiving PMD puts the flag and value to the mbuf and applications can
see the packet was threated inside flow engine according to the appropriate
RTE flow(s). MARK and FLAG are like some kind of gateway to transfer some
per-packet information from the flow engine to the application via
receiving datapath. Also, there is the item of type RTE_FLOW_ITEM_TYPE_MARK
provided. It allows us to extend the flow match pattern with the capability
to match the metadata values set by MARK/FLAG actions on other flows.
From the datapath point of view, the MARK and FLAG are related to the
receiving side only. It would useful to have the same gateway on the
transmitting side and there was the feature of type RTE_FLOW_ITEM_TYPE_META
was proposed. The application can fill the field in mbuf and this value
will be transferred to some field in the packet metadata inside the flow
engine. It did not matter whether these metadata fields are shared because
of MARK and META items belonged to different domains (receiving and
transmitting) and could be vendor-specific.
So far, so good, DPDK proposes some entities to control metadata inside
the flow engine and gateways to exchange these values on a per-packet basis
via datapaths.
As we can see, the MARK and META means are not symmetric, there is absent
action which would allow us to set META value on the transmitting path.
So, the action of type:
- RTE_FLOW_ACTION_TYPE_SET_META was proposed.
The next, applications raise the new requirements for packet metadata.
The flow ngines are getting more complex, internal switches are introduced,
multiple ports might be supported within the same flow engine namespace.
From the DPDK points of view, it means the packets might be sent on one
eth_dev port and received on the other one, and the packet path inside
the flow engine entirely belongs to the same hardware device. The simplest
example is SR-IOV with PF, VFs and the representors. And there is a
brilliant opportunity to provide some out-of-band channel to transfer
some extra data from one port to another one, besides the packet data
itself. And applications would like to use this opportunity.
It is supposed for application to use trials (with rte_flow_validate)
to detect which metadata features (FLAG, MARK, META) actually supported
by PMD and underlying hardware. It might depend on PMD configuration,
system software, hardware settings, etc., and should be detected
in run time.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
The VXLAN related definitions and structures are moved from
rte_ether.h to a new header file: rte_xvlan.h.
Also introducing a new define macro for VXLAN default port id:
RTE_VXLAN_DEFAULT_PORT
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/test-pmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_macaddr_get() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_eth_link_get_nowait() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/testpmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add eth_dev_info_get_print_err() which is a wrapper for
rte_eth_dev_info_get() printing error if rte_eth_dev_info_get()
fails and returning its status code.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In the rather unlikely case where the first segment is too small to
contain an ethernet header, we can't go and directly dereference the
mbuf data buffer.
Using rte_pktmbuf_read is a little more expensive but this is still
acceptable for a debugging feature.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Let's check the received/sent mbufs, it can help debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Previous patch introduces the Tx metadata feature, with unnecessary
restrictions on data entry.
It also used the metadata in txonly fwd engine only.
This fix removes the data entry restrictions on metadata item.
It also implements callback function to add the metadata in every
Tx packet, sent by any fwd engine.
Fixes: c18feafa19 ("app/testpmd: support metadata as flow rule item")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
add new rx/tx callback functions to be used for dumping the packets.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
verbosity for the received/sent packets is needed in all of the
forwarding engines so moving it to be in a separate function
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
