On Windows, strerror returns just "Unknown error" for errnum greater
than MAX_ERRNO, while linux and freebsd returns "Unknown error <num>",
which is the current expectation for errno_autotest. Differentiate
the error string on Windows to remove a "duplicate error code" failure.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
UT memory_autotest on Windows has 2 failed cases on EAL APIs
eal_memalloc_get_seg_fd and eal_memalloc_get_seg_fd_offset. These 2
APIs are not supported on Windows yet. Should return ENOTSUP such that
in test_memory.c these 2 ENOTSUP cases will not be marked as failures,
same as other ENOTSUP cases.
Fixes: 2a5d547a4a ("eal/windows: implement basic memory management")
Cc: stable@dpdk.org
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Sometimes OS tries to switch the core. So, bind the lcore thread
to a fixed core.
Implement affinity call on Windows similar to Linux.
Signed-off-by: Qiao Liu <qiao.liu@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
The generic header file was missing
in the list of files to install.
Fixes: 9667d97c25 ("pflock: add phase-fair reader writer locks")
Cc: stable@dpdk.org
Signed-off-by: Martijn Bakker <gladdyu@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Any EAL memory allocation often goes through eal_get_virtual_area()
function, which will print a warning whenever the resulting allocation
didn't match the specified address requirements. This is useful for
when we have requested a specific base virtual address, to let the user
know that the mapping has deviated from that address.
However, on Linux, we also have a default base address that's there to
ensure better chances of successful secondary process initialization,
as well as higher likelihood of the virtual areas to fit inside the
IOMMU address width. Because of this default base address, there are
warnings printed even when no base address was explicitly requested,
which can be confusing to the user.
Emit this warning with debug level unless base address was explicitly
requested by the user.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
While debugging running DPDK service in a container, it is
useful to see which file creation failed. Don't hide this
failure with DEBUG.
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Define a set of macros in the build configuration to allow C runtime
code to check the current OS environment. This saves the user having to
use ifdefs for e.g. disabling particular tests on Windows.
See included documentation changes for usage examples.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix spelling errors in comments including doxygen found using codespell.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Add support for Address Sanitizer (ASan) for PPC/POWER architecture.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch defines ASAN_SHADOW_OFFSET for arm64 according to the ASan
documentation. This offset should cover all arm64 VMAs supported by
ASan.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
We should call read() on RTE_INTR_HANDLE_VFIO_REQ event
to confirm that event.
Fixes: 0eb8a1c4c7 ("vfio: add request notifier interrupt")
Cc: stable@dpdk.org
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
This patch fixes coverity issue by adding a check for negative event fd
value.
Coverity issue: 373711, 373694
Fixes: c2bd9367e1 ("lib: remove direct access to interrupt handle")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, when code is running on FreeBSD or Windows, there is no way
to distinguish between a geniune error and a "VFIO is unsupported"
error. Fix the dummy implementations to also set the rte_errno flag.
Fixes: 279b581c89 ("vfio: expose functions")
Fixes: c564a2a200 ("vfio: expose clear group function for internal usages")
Fixes: 964b2f3bfb ("vfio: export some internal functions")
Fixes: ea2dc10668 ("vfio: add multi container support")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
On FreeBSD, `rte_vfio_is_enabled()` and `rte_vfio_noiommu_is_enabled()`
API calls will not return error, and will instead return 0. This is
intentional, because the caller of this API does not care whether VFIO
is supported at all, and will instead be interested in whether VFIO is
enabled or not. However, the doxygen comments for these functions state
that they will return an error on FreeBSD, which is incorrect.
Fix the doxygen comment to call out the fact that these
functions are only relevant on Linux, but remove the reference to
returning errors.
Fixes: 279b581c89 ("vfio: expose functions")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
On FreeBSD, `rte_vfio_clear_group()` was returning 0 even though this
function is not valid for FreeBSD, and is called out to return error in
doxygen comments.
Fix the return value to match documentation.
Fixes: c564a2a200 ("vfio: expose clear group function for internal usages")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, VFIO support for Linux is compiled unconditionally, and
supported kernel versions start with 4.4, so VFIO is assumed to always
be enabled. There is no way of disabling VFIO support at compile time
anyway, so just drop the "VFIO not available" fallback code altogether.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Since its introduction in 2018, the SIGBUS handler was never registered,
and all related functions were unused.
A SIGBUS can be received by the application when accessing to hugepages
even if mmap() was successful, This happens especially when running
inside containers when there is not enough hugepages. In this case, we
need to recover. A similar scheme can be found in eal_memory.c.
Fixes: 582bed1e1d ("mem: support mapping hugepages at runtime")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When using rte_malloc() from a thread which is not bound to a numa
socket (the typical case is a control thread, but it can also happen
on a dataplane thread if its cpu affinity is on cores attached to
several sockets), the used heap is the one from numa socket 0, which
may not have available memory.
Fix this by selecting the first socket which has available memory.
Note: malloc_get_numa_socket() is only used from one .c file, so move
it there, and remove the inline keyword.
Fixes: b94580d688 ("malloc: avoid unknown socket id")
Cc: stable@dpdk.org
Signed-off-by: Ilyes Ben Hamouda <ilyes.ben_hamouda@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@redhat.com>
If the user requests to use an lcore above 128 using -l,
the eal will exit with "EAL: invalid core list syntax" and
very little else useful information.
This patch adds some extra information suggesting to use --lcores
so that physical cores above RTE_MAX_LCORE (default 128) can be
used. This is achieved by using the --lcores option by mapping
the logical cores in the application to physical cores.
For example, if "-l 12-16,130,132" is used, we see the following
additional output on the command line:
EAL: lcore 132 >= RTE_MAX_LCORE (128)
EAL: lcore 133 >= RTE_MAX_LCORE (128)
EAL: To use high physical core ids, please use --lcores to map them
to lcore ids below RTE_MAX_LCORE,
EAL: e.g. --lcores 0@12,1@13,2@14,3@15,4@16,5@132,6@133
The same is added to -c option parsing.
For example, if "-c 0x300000000000000000000000000000000" is
used, we see the following additional output on the command line:
EAL: lcore 128 >= RTE_MAX_LCORE (128)
EAL: lcore 129 >= RTE_MAX_LCORE (128)
EAL: To use high physical core ids, please use --lcores to map them
to lcore ids below RTE_MAX_LCORE,
EAL: e.g. --lcores 0@128,1@129
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This API has been around for more than a year (and is in LTS 20.11).
It did not receive negative feedback and will be used in a next OVS
release.
Mark it stable.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The device event interrupt handler was always freed.
Bugzilla ID: 845
Fixes: c2bd9367e1 ("lib: remove direct access to interrupt handle")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Yan Xia <yanx.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Caught with ASan:
==9727==ERROR: AddressSanitizer: stack-buffer-overflow on address
0x7f0daa2fc0d0 at pc 0x7f0daeefacb2 bp 0x7f0daa2fadd0 sp 0x7f0daa2fa578
READ of size 1 at 0x7f0daa2fc0d0 thread T1
#0 0x7f0daeefacb1 (/lib64/libasan.so.5+0xbacb1)
#1 0x115eba1 in dev_uev_parse ../lib/eal/linux/eal_dev.c:167
#2 0x115f281 in dev_uev_handler ../lib/eal/linux/eal_dev.c:248
#3 0x1169b91 in eal_intr_process_interrupts
../lib/eal/linux/eal_interrupts.c:1026
#4 0x116a3a2 in eal_intr_handle_interrupts
../lib/eal/linux/eal_interrupts.c:1100
#5 0x116a7f0 in eal_intr_thread_main
../lib/eal/linux/eal_interrupts.c:1172
#6 0x112640a in ctrl_thread_init
../lib/eal/common/eal_common_thread.c:202
#7 0x7f0dade27159 in start_thread (/lib64/libpthread.so.0+0x8159)
#8 0x7f0dadb58f72 in clone (/lib64/libc.so.6+0xfcf72)
Address 0x7f0daa2fc0d0 is located in stack of thread T1 at offset 4192
in frame
#0 0x115f0c9 in dev_uev_handler ../lib/eal/linux/eal_dev.c:226
This frame has 2 object(s):
[32, 48) 'uevent'
[96, 4192) 'buf' <== Memory access at offset 4192 overflows this
variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism or swapcontext
(longjmp and C++ exceptions *are* supported)
Thread T1 created by T0 here:
#0 0x7f0daee92ea3 in __interceptor_pthread_create
(/lib64/libasan.so.5+0x52ea3)
#1 0x1126542 in rte_ctrl_thread_create
../lib/eal/common/eal_common_thread.c:228
#2 0x116a8b5 in rte_eal_intr_init
../lib/eal/linux/eal_interrupts.c:1200
#3 0x1159dd1 in rte_eal_init ../lib/eal/linux/eal.c:1044
#4 0x7a22f8 in main ../app/test-pmd/testpmd.c:4105
#5 0x7f0dada7f802 in __libc_start_main (/lib64/libc.so.6+0x23802)
Bugzilla ID: 792
Fixes: 0d0f478d04 ("eal/linux: add uevent parse and process")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Yan Xia <yanx.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
clang-13 rightfully complains that the total_mem variable in
eal_parse_socket_arg is set but not used, since the final
accumulated total_mem result isn't used anywhere.
So just remove the total_mem variable.
Fixes: 0a703f0f36 ("eal/linux: fix parsing zero socket memory and limits")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Devargs used in device iterator initialization wasn't set to zero, random
data like bus string lead to invalid address access.
This patch initializes devargs.
Bugzilla ID: 862
Fixes: c99a2d4c6b ("eal: implement device iteration initialization")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
FreeBSD EAL selected IOVA mode PA even in --no-huge mode
where PA are not available. Memory zones were created with IOVA
equal to RTE_BAD_IOVA with no indication this field is not usable.
Change IOVA mode detection:
1. Always allow to force --iova-mode=va.
2. In --no-huge mode, disallow forcing --iova-mode=pa, and select VA.
3. Otherwise select IOVA mode according to bus requests, default to PA.
In case contigmem is inaccessible, memory initialization will fail
with a message indicating the cause.
Fixes: c2361bab70 ("eal: compute IOVA mode based on PA availability")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Instead of polling for mcslock to be updated, use wait until scheme
for this case.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Instead of polling for read pflock update, use wait until scheme for
this case.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add a new generic helper which is a macro for wait until scheme.
Furthermore, to prevent compilation warning in arm:
----------------------------------------------
'warning: implicit declaration of function ...'
----------------------------------------------
Delete 'undef' constructions for '__LOAD_EXC_xx', '__SEVL' and '__WFE'.
And add ‘__RTE_ARM’ for these macros to fix the namespace.
This is because original macros are undefine at the end of the file.
If the new macro calls them in other files, they will be seen as
'not defined'.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds necessary hooks in the memory allocator for ASan.
This feature is currently available in DPDK only on Linux x86_64.
If other OS/architectures want to support it, ASAN_SHADOW_OFFSET must be
defined and RTE_MALLOC_ASAN must be set accordingly in meson.
Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Partial unmap support was introduced in commit c13ca4e81c
("vfio: fix DMA mapping granularity for IOVA as VA"), and with it
was added a check that dereferenced the IOMMU type to determine whether
partial ummapping is supported for currently configured IOMMU type. In
certain circumstances (such as when VFIO is supported, but no devices
were bound to the VFIO driver), the IOMMU type pointer can be NULL.
However, dereferencing of IOMMU type was guarded by access to the user
maps list - that is, we were always checking the user map list first,
and then, if we found a memory region that encloses the one we're trying
to unmap, we would have performed the IOMMU type check.
This ensured that the IOMMU type check will not cause any NULL pointer
dereferences, because in order for an IOMMU type check to have been
performed, there necessarily must have been at least one memory region
that was previously mapped successfully, and that implies having a
defined IOMMU type.
When commit 56259f7fc0 ("vfio: allow partially unmapping adjacent
memory") was introduced, the IOMMU type check was moved to
before we were traversing the user mem maps list, thereby introducing a
potential NULL dereference, because the IOMMU type access was no longer
guarded by the user mem maps list traversal.
Fix the issue by moving the IOMMU type check to after the user mem maps
traversal, thereby ensuring that by the time the check happens, the
IOMMU type is always valid.
Fixes: 56259f7fc0 ("vfio: allow partially unmapping adjacent memory")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: Xuan Ding <xuan.ding@intel.com>
Remove the usage of pthread barrier and replace it with
synchronization using atomic variable.
This also removes the use of reference count required to synchronize
freeing the memory.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Dynamically allocating the efds and elist array of intr_handle
structure, based on size provided by user. Eg size can be
MSIX interrupts supported by a PCI device.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
VFIO/UIO are mutually exclusive, storing file descriptor in a single
field is enough.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Moving interrupt handle structure definition inside a EAL private
header to make its fields totally opaque to the outside world.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the libraries access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the libraries access the interrupt handle fields.
Implementing alarm cleanup routine, where the memory allocated
for interrupt instance can be freed.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Making changes to the interrupt framework to use interrupt handle
APIs to get/set any field.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Prototype/Implement get set APIs for interrupt handle fields.
User won't be able to access any of the interrupt handle fields
directly while should use these get/set APIs to access/manipulate
them.
Internal interrupt header i.e. rte_eal_interrupt.h is rearranged,
as APIs defined are moved to rte_interrupts.h and epoll specific
definitions are moved to a new header rte_epoll.h.
Later in the series rte_eal_interrupt.h will be removed.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Windows EAL did not detect IOVA mode and worked incorrectly
if physical addresses could not be obtained
(if virt2phys driver was missing or inaccessible).
In this case, rte_mem_virt2iova() reported RTE_BAD_IOVA for any address.
Inability to obtain IOVA, be it PA or VA, should cause a failure
for the DPDK allocator, but it was hidden by the implementation,
so allocations did not fail when they should.
The mode when DPDK cannot obtain PA but can work is IOVA-as-VA mode.
However, rte_eal_iova_mode() always returned RTE_IOVA_DC
(while it should only ever return RTE_IOVA_PA or RTE_IOVA_VA),
because IOVA mode detection was not implemented.
Implement IOVA mode detection:
1. Always allow to force --iova-mode=va.
2. Allow to force --iova-mode=pa only if virt2phys is available.
3. If no mode is forced and virt2phys is available,
select the mode according to bus requests, default to PA.
4. If no mode is forced but virt2phys is unavailable, default to VA.
Fix rte_mem_virt2iova() by returning VA when using IOVA-as-VA.
Fix rte_eal_iova_mode() by returning the selected mode.
Fixes: 2a5d547a4a ("eal/windows: implement basic memory management")
Cc: stable@dpdk.org
Reported-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Ensure that the memory operations before the call to
rte_eal_remote_launch are visible to the worker thread.
Use the function pointer to execute in worker thread
as the guard variable.
Ensure that the memory operations in worker thread, that happen
before it returns the status of the assigned function, are
visible to the main thread. Use the variable containing the
lcore's state as the guard variable.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
FINISHED state seems to be used to indicate that the worker's update
of the 'state' is not visible to other threads. There seems to be no
requirement to have such a state.
Since the FINISHED state is removed, the API rte_eal_wait_lcore
is updated to always return the status of the last function that
ran in the worker core.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
In the rte_eal_remote_launch function, the lcore function
pointer is checked for NULL. However, the pointer is never
reset to NULL. Reset the lcore function pointer and argument
after the worker has completed executing the lcore function.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
Functions and macros in x86 rte_memcpy.h may cause cast-align warnings,
when using strict cast align flag with supporting gcc:
gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
CFLAGS="-Wcast-align=strict" make V=1 -C examples/l2fwd clean static
For example:
In file included from main.c:24:
/dpdk/build/include/rte_memcpy.h: In function 'rte_mov16':
/dpdk/build/include/rte_memcpy.h:306:25: warning: cast increases
required alignment of target type [-Wcast-align]
306 | xmm0 = _mm_loadu_si128((const __m128i *)src);
| ^
As the code assumes correct alignment, add first a (void *) or (const
void *) castings, to avoid the warnings.
Fixes: 9484092baa ("eal/x86: optimize memcpy for AVX512 platforms")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Currently, if we map a memory area A, then map a separate memory area B
that by coincidence happens to be adjacent to A, current implementation
will merge these two segments into one, and if partial unmapping is not
supported, these segments will then be only allowed to be unmapped in
one go. In other words, given segments A and B that are adjacent, it
is currently not possible to map A, then map B, then unmap A.
Fix this by adding a notion of "chunk size", which will allow
subdividing segments into equally sized segments whenever we are dealing
with an IOMMU that does not support partial unmapping. With this change,
we will still be able to merge adjacent segments, but only if they are
of the same size. If we keep with our above example, adjacent segments A
and B will be stored as separate segments if they are of different
sizes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Tested-by: Yvonne Yang <yvonnex.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Global devargs syntax is used as device iteration filter like
"class=vdpa", a devargs without bus args is valid from parsing
perspective.
This patch makes bus args optional.
Fixes: d2a66ad794 ("bus: add device arguments name parsing")
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
