When trying to compile some examples with libdpdk.pc,
the right environment (for default target) was not loaded.
The consequence is to not detect some dependencies because
of missing directories in PKG_CONFIG_PATH.
The environment preparation is moved to a dedicate function,
and called for the default target (cc),
before testing the install output of the default build.
Fixes: 2722367412 ("devtools: load target-specific compilation environment")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The nfb PMD is disabled by default because of its dependency
on netcope-common package.
The variable DPDK_DEP_NFB was introduced but not used to notify
the dependency availability in the build test script.
The AF_XDP PMD is disabled by default because of its dependency
on libbpf on Linux.
An option was missing to notify the dependency availability
in the build test script.
Fixes: 6435f9a0ac ("net/nfb: add new netcope driver")
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The meson build test fails if ccache is not available.
The use of ccache must be optional.
And if used, the compiler to check is the last word of $CC.
Fixes: e0ae780e65 ("devtools: test compiler availability only once")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
In order to re-use the same test environment as with
test-build.sh, the configuration file is loaded at each build,
after adjusting the variable DPDK_TARGET.
This is especially useful to set the variable PKG_CONFIG_PATH,
or define some meson options (without -D) in DPDK_MESON_OPTIONS.
The DPDK_TARGET values can be
aarch64-*, powerpc64-*, x86_64-*.
The matching DPDK_TARGET values for test-build.sh are
arm64-*, ppc_64-*, x86_64-*.
The advised expressions to use in the common configuration file are:
if echo $DPDK_TARGET | grep -q '^a.*64-' ; then
elif echo $DPDK_TARGET | grep -q '^p.*pc.*64' ; then
elif echo $DPDK_TARGET | grep -q '^x86_64' ; then
fi
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
The compilation test is skipped if the compiler is not available.
In the case of gcc/arm, it was tested both in the generic function
"build" and in the cross-compilation section.
By passing the compiler as argument of the generic function,
the test with "command" is done only once.
This small clean-up has the benefit of introducing the compiler
parameter to be used later in another improvement.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
In order to ease basic testing with customized options,
EAL and testpmd options can be added as third and fourth arguments
of the "null PMD" script.
Also, the first argument becomes more flexible by accepting
the testpmd path as an alternative to the build directory.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This small testpmd test was not working for a long time
because of several changes in EAL and mempool.
The 3 main issues solved are:
- Make --no-huge working by specifying an amount of memory
to allocate in legacy mode, and disabling mlockall.
- Load a mempool handler in shared library case.
- Support meson
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
- As "readlink -e" and "readlink -m" do not exist on freebsd,
use "readlink -f", it should not have any impact in these cases.
- "sed -ri" is invalid on freebsd and should be replaced by
"sed -ri=''"
- Use gmake instead of make.
This fixes the following command:
SYSDIR=/usr/src/sys ./devtools/test-build.sh \
-j4 x86_64-native-freebsd-gcc
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Update devtools/build-tags.sh to account the kernel
components under in kernel directory.
Fixes: acaa9ee991 ("move kernel modules directories")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add the ability to pass custom options to checkpatch script. An example
of use is to change the output format so it can run in emacs compilation
mode:
DPDK_CHECKPATCH_PATH=/path/to/linux/scripts/checkpatch.pl \
DPDK_CHECKPATCH_OPTIONS='--emacs --showfile --no-color' \
/path/to/dpdk.org/devtools/checkpatches.sh
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
With Debian and Ubuntu, the default installation path for the 64-bit
libraries is set to e.g. /usr/local/lib/x86_64-linux-gnu/, compared to
/usr/local/lib64 on Fedora and Redhat distributions. This causes issues
when using "pkg-config --define-prefix" since pkg-config assumes the prefix
to be the grandparent of where the .pc file is. On Ubuntu we then get the
cflags include path as being "/path/to/install-root/usr/local/lib/include"
i.e. with an extra "lib" in the path.
This issue only applies for test installs on Ubuntu and similar distros,
and is not a problem for regular installs since the --define-prefix
parameter would not be passed to pkg-config in those cases.
The workaround for this in our test build script is to explicitly make
"lib" the "libdir" setting for the install, overriding the distro-provided
default.
Fixes: 7f80a2102b ("devtools: test pkg-config file")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The pkg-config file generated as part of the build of DPDK should allow
applications to be built with an installed DPDK. We can test this as
part of the build by doing an install of DPDK to a temporary directory
within the build folder, and by then compiling up a few sample apps
using make working off that directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Allow the script to run with a reduced set of builds if clang, or
other compilers, are missing.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Putting a '__attribute__((deprecated))' in the middle of a function
prototype does not result in the expected result with gcc (while clang
is fine with this syntax).
$ cat deprecated.c
void * __attribute__((deprecated)) incorrect() { return 0; }
__attribute__((deprecated)) void *correct(void) { return 0; }
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
$ gcc -o deprecated.o -c deprecated.c
deprecated.c: In function ‘main’:
deprecated.c:3:1: warning: ‘correct’ is deprecated (declared at
deprecated.c:2) [-Wdeprecated-declarations]
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
^
Move the tag on a separate line and make it the first thing of function
prototypes.
This is not perfect but we will trust reviewers to catch the other not
so easy to detect patterns.
sed -i \
-e '/^\([^#].*\)\?__rte_experimental */{' \
-e 's//\1/; s/ *$//; i\' \
-e __rte_experimental \
-e '/^$/d}' \
$(git grep -l __rte_experimental -- '*.h')
Special mention for rte_mbuf_data_addr_default():
There is either a bug or a (not yet understood) issue with gcc.
gcc won't drop this inline when unused and rte_mbuf_data_addr_default()
calls rte_mbuf_buf_addr() which itself is experimental.
This results in a build warning when not accepting experimental apis
from sources just including rte_mbuf.h.
For this specific case, we hide the call to rte_mbuf_buf_addr() under
the ALLOW_EXPERIMENTAL_API flag.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
We had some inconsistencies between functions prototypes and actual
definitions.
Let's avoid this by only adding the experimental tag to the prototypes.
Tests with gcc and clang show it is enough.
git grep -l __rte_experimental |grep \.c$ |while read file; do
sed -i -e '/^__rte_experimental$/d' $file;
sed -i -e 's/ *__rte_experimental//' $file;
sed -i -e 's/__rte_experimental *//' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Rather than default to origin/master.., it can be handy to choose the
range you want to check.
Example on a branch rebased on next-net:
Before:
$ ./devtools/checkpatches.sh
...
...
67/69 valid patches
After:
$ ./devtools/checkpatches.sh -r next-net/master..
3/3 valid patches
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The incriminated commit broke the detection of new symbols skipping the
EXPERIMENTAL step before entering a stable ABI section.
sed won't return an error, check a null output instead.
Fixes: 3630757803 ("devtools: accept experimental symbol promotion")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
We have an incorrect variable name in this log.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The new default-taget "linux" is introduced in v19.05-rc1
but not exist in before release such as v19.02 which have
default-target "linuxapp", there is no compatibility report
when run validate-abi.sh to check ABI compatibility between
v19.05-rc1 and v19.02, changed default-target from "linux"
to "linuxapp" in validate-abi.sh
Fixes: 218c4e68c1 ("mk: use linux and freebsd in config names")
Cc: stable@dpdk.org
Signed-off-by: Peng Huang <peng.huang@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The pipefail option is not supported in /bin/sh, just in bash/ksh and
similar shells - which means it's there by default on most Linux distros
but not on e.g. FreeBSD. Therefore we check for it's presence before
setting the option, and if it's missing, we upgrade verbosity level if
needed to ensure we never hide any build failures.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The use of "==" is non-standard extension from bash, so use "="
for comparisons instead.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Older versions of GCC, such as on Redhat/CentOS 7, don't support
-march=nehalem, but need -march=corei7 instead.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
If either gcc or clang are missing, skip doing those builds.
This allows a setup to only do, e.g. gcc tests.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Currently, when symbols get promoted from the EXPERIMENTAL section to a
stable ABI section, the script complains they should go to the
EXPERIMENTAL section.
Example:
ERROR: symbol rte_devargs_add is added in the DPDK_19.05 section, but is
expected to be added in the EXPERIMENTAL section of the version map
This is legit.
Moving from a stable ABI to another is also allowed, but must have gone
through the proper process.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The existing cocci script for coccinelle replaces all matching instances
of snprintf() with strlcpy() without regards to header inclusion. To allow
changes without build errors, we create a safer version of this script
that only makes changes when the rte_string_fns.h header is already
included.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The original coccinelle script worked by replacing instances of
snprintf(.."%s",...) with strlcpy(), but only where the source and dest
parameters were plain identifiers. Allowing expressions for those params
opens up a wide range of other possible changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Only one header file (rte_kni_common.h) was in the sub-directory
include/exec-env/
This file was installed in a sub-directory of the same name
in the makefile-based build.
Source and install directories are moved as below:
lib/librte_eal/linux/eal/include/exec-env/
-> lib/librte_eal/linux/eal/include/
build/include/exec-env/
-> build/include/
The consequence is to have a file hierarchy a bit more flat.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The test-meson-builds.sh script correctly detects the source directory and
builds the native builds successfully in a directory outside of the source
tree. However, the paths to the cross-files are not prefixed with the
source directory path, so the cross-builds all fail. Fix this by prepending
the source directory path appropriately.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The check for a valid configuration in build-tags.sh relied on the output
of "make showconfig" rather than checking directly for a config file of
that name. This broke when as part of the rename of the linuxapp/bsdapp
configs to just linux/freebsd, as we stopped advertising the old names
even if they worked. Changing the code to just look for the config
file by name fixes this issue while shortening the code too.
Fixes: 218c4e68c1 ("mk: use linux and freebsd in config names")
Fixes: aafaea3d3b ("devtools: add tags and cscope index generation")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When piping the ninja command through cat, we lose the error value from
the call to ninja in the case of failure. This prevents the script from
exiting at the first broken build. Fix this by setting the "pipefail"
shell option.
Fixes: 4bcb9b7686 ("devtools: add verbose option to meson build test")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the cross files for meson compilation from having linuxapp
in the name to just linux in the name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "bsdapp" is a legacy one, but just calling the subdirectory
"freebsd" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
build-tags.sh is broken because of removed 'test' folder, this breaks
helper make targets like 'make cscope', 'make tags', etc...
Fixing it by removing 'test' from source directories list.
Fixes: a9de470cc7 ("test: move to app directory")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Fix trivial bug. In sh shell, 'foo = 1' is not the same as
'foo=1'. Using 'foo = 1' makes the shell attempt to interpret foo
as a command, rather than a simple variable assignment.
Fixes: dafc04c151 ("devtools: fix return of forbidden addition checks")
Cc: stable@dpdk.org
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Enable codespell by default.
codespell is a feature by checkpatch.pl that
checks for common spelling mistakes in patches.
This feature is disabled by default. To enable it one must add
the '--codespell' flag to the $options variable in
checkpatches.sh. With this change codespell is enabled by default.
The user can decide to turn off codespell from a one of the config
files read by checkpatches.sh.
Signed-off-by: Michael Santana <msantana@redhat.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When running ninja, the commands are, by default, always printed on top of
each other. For those who want more detail in the output, two levels of
verbose output has been added to the test-meson-builds script. When "-v" is
passed, or the "TEST_MESON_BUILD_VERBOSE" flag is set in the environment,
then the output of ninja is passed through "cat" to prevent each line
overwriting the next. If "-vv" is passed, or
"TEST_MESON_BUILD_VERY_VERBOSE" is set in the environment, then ninja is
called with the "-v" flag to print out each command in full as it is
executing.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
readlink option "-m" is not supported on FreeBSD (checked on BSD 11),
so change to the largely-equivalent "-f" flag.
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
CONFIG_RTE_LIBRTE_PMD_ISAL was not tested because of a typo.
CONFIG_RTE_LIBRTE_PMD_QAT_SYM was not tested since it has been
introduced and made CONFIG_RTE_LIBRTE_PMD_QAT enabled by default.
While at it, DPDK_DEP_JSON is now checked for "y",
as other DPDK_DEP_* variables, instead of non-empty.
Fixes: 3c32e89f68 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes: 7a34c21557 ("compress/qat: add empty driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The PMD zlib was not enabled in devtools/test-build.sh.
It is fixed by using the environment variable DPDK_DEP_ZLIB.
Fixes: 0c4e4c16b0 ("compress/zlib: introduce zlib PMD")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The option CONFIG_RTE_LIBRTE_BPF_ELF was never enabled
with test-build.sh.
It is fixed with the environment variable DPDK_DEP_ELF.
Fixes: 5dba93ae5f ("bpf: add ability to load eBPF program from ELF object file")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The current check to see whether we need to call meson or just ninja
simply checked if the build directory existed. However, if meson was run
but failed, the build directory would still exist. We can fix this by
instead checking for the build.ninja file inside the directory. Once that
is present, we can use ninja safely and let it worry about rerunning
meson if necessary.
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
