This patch adds a refcnt field to every session private data in the
cryptodev symmetric session. The counter is used to prevent freeing
symmetric session blindly before it is not cleared by every type of
crypto device in use.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a user_data_sz field to cryptodev symmetric session.
The field is used to check if reading or writing the session's user
data field is eligible.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the rte_cryptodev_sym_session structure for
cryptodev library. The updates include a changed session private
data array and an added nb_drivers field. They are used to
calculate the correct session header size and ensure safe access
of the session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a new API "rte_cryptodev_sym_session_pool_create()" to
cryptodev library. All applications are required to use this API to
create sym session mempool as it adds private data and nb_drivers
information to the mempool private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes the cryptodev queue pair configure structure
to enable two mempool passed into cryptodev PMD simutaneously.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the plain SHA1, SHA224, SHA256, SHA384, and SHA512
algorithms support to AESNI-MB PMD. The cryptodev unit test and
documentation are updated accordingly.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch enables compression on DH895x HW series
and updates supported hardware accelerator devices list.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds the AES-GMAC authentication only support to AESNI-MB
PMD, including the driver code, cryptodev unit test, and documentation
updates.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Damian Nowak <damianx.nowak@intel.com>
This patch updates the AESNI-MB PMD document with the new intel-ipsec-mb
version number, the release note with new library version support, and
the deprecation notice for removing some library version support in
19.05 release.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the incorrect intel multi buffer library support
version and missed limitation of GCM algorithm support.
Fixes: 0e9f8507afcb ("crypto/aesni_mb: support AES-GCM algorithm")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds checksum support in the ISA-L PMD for both compression
and decompression.
CRC32 is supported as well as Adler32.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Function iter_mempool is used for iterating slected mempool elements
and display the contents of elements for a max of 256 bytes. In case
of invalid or no name for mempool, no information is displayed.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_mempool is used for displaying valid MEMPOOL.
In case of invalid or no name, whole list is dump.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_ring is used for displaying information of RING instance
of the primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_crypto is used for displaying the crypto PMD under primary
process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_tm is used for displaying the tm PMD under the primary
process. This covers basic and per node|level details with statistics.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_port is used for displaying the port PMD information under
primary process. The information shows basic, per queue and security.
Also helper MACRO 'MAX_STRING_LEN, STATS_BDR_FMT and STATS_BDR_STR' and
meson build file is updated for new functionality.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit includes the add of:
- ConnectX-6 device ID
- ConnectX-6 SRIOV device ID
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the changes proposed in the deprecation
notes [1][2].
librte_mbuf changes:
The mbuf->hash.sched field is updated to support generic
definition in line with the ethdev traffic manager and meter APIs.
The new generic format contains: queue ID, traffic class, color.
Added public APIs to set and get these new fields to and from mbuf.
librte_sched changes:
In addtion, following API functions of the sched library have
been modified with an additional parameter of type struct
rte_sched_port to accommodate the changes made to mbuf sched field.
(i)rte_sched_port_pkt_write()
(ii) rte_sched_port_pkt_read_tree_path()
librte_pipeline, qos_sched UT, qos_sched app are updated
to make use of new changes.
Also mbuf->hash.txadapter has been added for eventdev txq,
rte_event_eth_tx_adapter_txq_set and rte_event_eth_tx_adapter_txq_get()
are updated to use mbuf->hash.txadapter.txq.
doc:
Release notes updated.
Removed deprecation notice for mbuf->hash.sched and sched API.
[1] http://mails.dpdk.org/archives/dev/2018-February/090651.html
[2] https://mails.dpdk.org/archives/dev/2018-November/119051.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
This capability is reported when supported by the current emitting
sub-device. Failsafe PMD itself does not exercise fast free logic.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Updated the doc and release notes on the support for requesting more
queues.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add ops link_update.
LSC interrupt is also enabled in this patch.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, the features list was indicating unsupported ENA PMD
features and were missing few ones, that were actually supported.
The features file was updated, so it is now reflecting current driver
state.
The documentation was updated with the more actual example and features,
especially ones which are ENA and not listed in the features file.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Add the SW assisted VDPA live migration feature into NIC doc.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As of commit 364e08f2bbc0, DPDK allows an application to send and
receive raw packets using an AF_PACKET and PACKET_MMAP, when using
Linux Kernel. This complements it by adding a simple guide with the
following information:
- An introduction, where a brief explanation of this driver is given,
pointing out the dependency on PACKET_MMAP;
- Which options are supported at configuration time, while setting up an
interface, and it's inherent limitations;
- What the prerequisites are;
- A command line example of how to set up a DPDK port using the
af_packet driver.
Since there's a dependency in PACKET_MMAP, the guide also points to the
original Kernel documentation, so the reader can get more details.
Signed-off-by: Tiago Lam <tiago.lam@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, malloc statistics and external heap creation code
use memory hotplug lock as a way to synchronize accesses to
heaps (as in, locking the hotplug lock to prevent list of heaps
from changing under our feet). At the same time, malloc
statistics code will also lock the heap because it needs to
access heap data and does not want any other thread to allocate
anything from that heap.
In such scheme, it is possible to enter a deadlock with the
following sequence of events:
thread 1 thread 2
rte_malloc()
rte_malloc_dump_stats()
take heap lock
take hotplug lock
failed to allocate,
attempt to take
hotplug lock
attempt to take heap lock
Neither thread will be able to continue, as both of them are
waiting for the other one to drop the lock. Adding an
additional lock will require an ABI change, so instead of
that, make malloc statistics calls thread-unsafe with
respect to creating/destroying heaps.
Fixes: 72cf92b31855 ("malloc: index heaps using heap ID rather than NUMA node")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an rte_bsf64 function that follows the convention of existing
rte_bsf32 function. Also, add missing implementation for safe
version of rte_bsf32, and implement unit tests for all recently
added bsf varieties.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The function rte_bsf64 was deprecated in a previous release, so
remove the function, and the deprecation notice associated with
it.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Memory mode flags are now shared between primary and secondary
processes, so the in documentation about limitations is no longer
necessary.
Fixes: 64cdfc35aaad ("mem: store memory mode flags in shared config")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When running in no-huge mode, we anonymously allocate our memory.
While this works for regular NICs and vdev's, it's not suitable
for memory sharing scenarios such as virtio with vhost_user
backend.
To fix this, allocate no-huge memory using memfd, and register
it with memalloc just like any other memseg fd. This will enable
using rte_memseg_get_fd() API with --no-huge EAL flag.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If memfd support was not compiled, or hugepage memfd support
is not available at runtime, the API will now return proper
error code, indicating that this API is unsupported. This
changes the API, so document the changes.
Fixes: 41dbdb68723b ("mem: add external API to retrieve page fd")
Fixes: 3a44687139eb ("mem: allow querying offset into segment fd")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Segment fd API does not support getting segment fd's from
externally allocated memory, so return proper error code
on any attempts to do so. This changes API behavior, so
document the change as well.
Fixes: 5282bb1c3695 ("mem: allow memseg lists to be marked as external")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add multiprocess support for externally allocated memory areas that
are not added to DPDK heap (and add relevant doc sections).
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The general use-case of using external memory is well covered by
existing external memory API's. However, certain use cases require
manual management of externally allocated memory areas, so this
memory should not be added to the heap. It should, however, be
added to DPDK's internal structures, so that API's like
``rte_virt2memseg`` would work on such external memory segments.
This commit adds such an API to DPDK. The new functions will allow
to register and unregister externally allocated memory areas, as
well as documentation for them.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
SPDK uses the rte_mem_event_callback_register API to
create RDMA memory regions (MRs) for newly allocated regions
of memory. This is used in both the SPDK NVMe-oF target
and the NVMe-oF host driver.
DPDK creates internal malloc_elem structures for these
allocated regions. As users malloc and free memory, DPDK
will sometimes merge malloc_elems that originated from
different allocations that were notified through the
registered mem_event callback routine. This results
in subsequent allocations that can span across multiple
RDMA MRs. This requires SPDK to check each DPDK buffer to
see if it crosses an MR boundary, and if so, would have to
add considerable logic and complexity to describe that
buffer before it can be accessed by the RNIC. It is somewhat
analagous to rte_malloc returning a buffer that is not
IOVA-contiguous.
As a malloc_elem gets split and some of these elements
get freed, it can also result in DPDK sending an
RTE_MEM_EVENT_FREE notification for a subset of the
original RTE_MEM_EVENT_ALLOC notification. This is also
problematic for RDMA memory regions, since unregistering
the memory region is all-or-nothing. It is not possible
to unregister part of a memory region.
To support these types of applications, this patch adds
a new --match-allocations EAL init flag. When this
flag is specified, malloc elements from different
hugepage allocations will never be merged. Memory will
also only be freed back to the system (with the requisite
memory event callback) exactly as it was originally
allocated.
Since part of this patch is extending the size of struct
malloc_elem, we also fix up the malloc autotests so they
do not assume its size exactly fits in one cacheline.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
