Currently, while there is a way to find total amount of used/free
space in an fbarray, there is no way to find biggest contiguous
chunk. Add such API, as well as unit tests to test this API.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
use case: if callback is used to receive message form socket,
and the message received is disconnect/error, this callback needs
to be unregistered, but cannot because it is still active.
With this patch it is possible to mark the callback to be
unregistered once the interrupt process is done with this
interrupt source.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Currently, rte_realloc will not respect original allocation's
NUMA node when memory cannot be resized, and there is no
NUMA-aware equivalent of rte_realloc. This patch adds such a function.
The new API will ensure that reallocated memory stays on
requested NUMA node, as well as allow moving allocated memory
to a different NUMA node.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add multiprocess support for externally allocated memory areas that
are not added to DPDK heap (and add relevant doc sections).
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The general use-case of using external memory is well covered by
existing external memory API's. However, certain use cases require
manual management of externally allocated memory areas, so this
memory should not be added to the heap. It should, however, be
added to DPDK's internal structures, so that API's like
``rte_virt2memseg`` would work on such external memory segments.
This commit adds such an API to DPDK. The new functions will allow
to register and unregister externally allocated memory areas, as
well as documentation for them.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The functions rte_dev_probe() and rte_dev_remove() are new
in DPDK 18.11 so they got the experimental tag by policy.
However they are too much basic functions for being skipped
by strict applications which do not use experimental functions.
The alternative is to use rte_eal_hotplug_add() and
rte_eal_hotplug_remove(), but their API requires the application
to parse the devargs string in order to provide bus name,
device name and driver arguments.
The new function rte_dev_probe() is really simpler to use and
more flexible by accepting any devargs string.
Let's encourage applications to use it.
The old functions rte_eal_hotplug_* may be deprecated later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Tested-by: Kevin Traynor <ktraynor@redhat.com>
During memory initialization calling rte_mem_check_dma_mask
leads to a deadlock because memory_hotplug_lock is locked by a
writer, the current code in execution, and rte_memseg_walk
tries to lock as a reader.
This patch adds a thread_unsafe version which will call the final
function specifying the memory_hotplug_lock does not need to be
acquired. The patch also modified rte_mem_check_dma_mask as a
intermediate step which will call the final function as before,
implying memory_hotplug_lock will be acquired.
PMDs should always use the version acquiring the lock with the
thread_unsafe one being just for internal EAL memory code.
Fixes: 223b7f1d5e ("mem: add function for checking memseg IOVA")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the possibility of setting a dma mask to be used
once the memory initialization is done.
This is currently needed when IOVA mode is set by PCI related
code and an x86 IOMMU hardware unit is present. Current code calls
rte_mem_check_dma_mask but it is wrong to do so at that point
because the memory has not been initialized yet.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Current name rte_eal_check_dma_mask does not follow the naming
used in the rest of the file.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
A device can suffer addressing limitations. This function checks
memsegs have iovas within the supported range based on dma mask.
PMDs should use this function during initialization if device
suffers addressing limitations, returning an error if this function
returns memsegs out of range.
Another usage is for emulated IOMMU hardware with addressing
limitations.
It is necessary to save the most restricted dma mask for checking out
memory allocated dynamically after initialization.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch makes the eal_get_runtime_dir() API public so it can be used
from outside EAL.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds infrastructure to EAL that allows an application to
register it's init function with EAL. This allows libraries to be
initialized at the end of EAL init.
This infrastructure allows libraries that depend on EAL to be initialized
as part of EAL init, removing circular dependency issues.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Add a new rte_delay_us_sleep() function that uses nanosleep().
This function can be used by applications to not implement
their own nanosleep() based callback and by internal DPDK
code if CPU non-blocking delay needed.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
These hotplug functions were deprecated and have some new replacements.
As announced earlier, the oldest ones are now removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The function rte_dev_is_probed() is added in order to improve semantic
and enforce proper check of the probing status of a device.
It will answer this rte_device query:
Is it already successfully probed or not?
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch modify the device event callback process function name to be
more explicit, change the variable to be const. And more, because not only
eal device helper will use the callback, but also vfio bus will use the
callback to handle hot-unplug, so exposure the API out from private eal.
The bus drivers and eal device would directly use this API to process
device event callback.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The mechanism can initially register the sigbus handler after the device
event monitor is enabled. When a sigbus event is captured, it will check
the failure address and accordingly handle the memory failure of the
corresponding device by invoke the hot-unplug handler. It could prevent
the application from crashing when a device is hot-unplugged.
By this patch, users could call below new added APIs to enable/disable
the device hotplug handle mechanism. Note that it just implement the
hot-unplug handler in these functions, the other handler of hotplug, such
as handler for hotplug binding, could be add in the future if need:
- rte_dev_hotplug_handle_enable
- rte_dev_hotplug_handle_disable
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
All information about a device to probe can be grouped
in a common string, which is what we usually call devargs.
An application should not have to parse this string before
calling the EAL probe function.
And the syntax could evolve to be more complex and support
matching multiple devices in one string.
That's why the bus name and device name should be removed from
rte_eal_hotplug_add().
Instead of changing this function, a simpler one is added
and used in the old one, which may be deprecated later.
When removing a device, we already know its rte_device handle
which can be directly passed as parameter of rte_eal_hotplug_remove().
If the rte_device is not known, it can be retrieved with the devargs,
by iterating in the device list (future RTE_DEV_FOREACH()).
Similarly to the probing case, a new function is added
and used in the old one, which may be deprecated later.
The new function is used in failsafe, because the replacement is easy.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
These functions are quite old and are the only available replacement
for the deprecated attach/detach functions.
Note: some new functions may (again) replace these hotplug functions,
in future, with better parameters.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eal_parse_devargs_str() does not support parsing the bus name
at the start of devargs. So it was renamed and deprecated.
rte_eal_devargs_add(), rte_eal_devargs_type_count() and
rte_eal_devargs_dump() were declared deprecated and had their
implementation body renamed.
All these functions were deprecated in release 18.05.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
In order to use external memory in multiple processes, we need to
attach to primary process's memseg lists, so add a new API to do
that. It is the responsibility of the user to ensure that memory
is accessible and that it has been previously added to the malloc
heap by another process.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an API to remove memory from specified heaps. This will first
check if all elements within the region are free, and that the
region is the original region that was added to the heap (by
comparing its length to length of memory addressed by the
underlying memseg list).
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an API to add externally allocated memory to malloc heap. The
memory will be stored in memseg lists like regular DPDK memory.
Multiple segments are allowed within a heap. If IOVA table is
not provided, IOVA addresses are filled in with RTE_BAD_IOVA.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add API to allow creating new malloc heaps. They will be created
with socket ID's going above RTE_MAX_NUMA_NODES, to avoid clashing
with internal heaps.
This breaks the ABI, so document the change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
An API is needed to check whether a particular socket ID belongs
to an internal or external heap. Prime user of this would be
mempool allocator, because normal assumptions of IOVA
contiguousness in IOVA as VA mode do not hold in case of
externally allocated memory.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we will be creating external heaps, they will have their own
"fake" socket ID, so add a function that will map the heap name
to its socket ID.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
In a few cases, user may need to query offset into fd for a
particular memory segment (for example, to selectively map
pages). This commit adds a new API to do that.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Now that we can retrieve page fd's internally, we can expose it
as an external API. This will add two flavors of API - thread-safe
and non-thread-safe. Fix up internal API's to return values we need
without modifying rte_errno internally if called from within EAL.
We do not want calling code to accidentally close an internal fd, so
we make a duplicate of it before we return it to the user. Caller is
therefore responsible for closing this fd.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The strncpy function has long been deemed unsafe for use,
in favor of strlcpy or snprintf.
While snprintf is standard and strlcpy is still largely available,
they both have issues regarding error checking and performance.
Both will force reading the source buffer past the requested size
if the input is not a proper c-string, and will return the expected
number of bytes copied, meaning that error checking needs to verify
that the number of bytes copied is not superior to the destination
size.
This contributes to awkward code flow, unclear error checking and
potential issues with malformed input.
The function strscpy has been discussed for some time already and
has been made available in the linux kernel[1].
Propose this new function as a safe alternative.
[1]: http://git.kernel.org/linus/30c44659f4a3
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use the iteration hooks in the abstraction layers to perform the
requested filtering on the internal device lists.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Parse a device description.
Split this description in their relevant part for each layers.
No dynamic allocation is performed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This abstraction exists since the infancy of DPDK.
It needs to be fleshed out however, to allow a generic
description of devices properties and capabilities.
A device class is the northbound interface of the device, intended
for applications to know what it can be used for.
It is conceptually just above buses.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
rte_devargs_parse becomes non-variadic,
rte_devargs_parsef becomes the variadic version, to be used to compose
device strings.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since uuid functions may not be available everywhere, implement
uuid functions in DPDK. These are based off the BSD licensed
libuuid in util-link.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Sometimes, user code needs to walk memseg list while being inside
a memory-related callback. Rather than making everyone copy around
the same iteration code and depending on DPDK internals, provide an
official way to do memseg_list_walk() inside callbacks.
Also, remove existing reimplementation from memalloc code and use
the new API instead.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Sometimes, user code needs to walk memseg list while being inside
a memory-related callback. Rather than making everyone copy around
the same iteration code and depending on DPDK internals, provide an
official way to do memseg_walk() inside callbacks.
Also, remove existing reimplementation from sPAPR VFIO code and use
the new API instead.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Sometimes, user code needs to walk memseg list while being inside
a memory-related callback. Rather than making everyone copy around
the same iteration code and depending on DPDK internals, provide an
official way to do memseg_contig_walk() inside callbacks.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add a function to return starting point of current contiguous
block, going backwards. All semantics are kept the same as the
existing function, with the only difference being that given the
same input, results will be returned in reverse order.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add a function to look for N used/free slots, but going backwards
instead of forwards. All semantics are kept similar to the existing
function, with the difference being that given the same input, the
same results will be returned in reverse order.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add function to look up used/free indexes starting from specified
index, but going backwards instead of forward. Semantics are kept
similar to the existing function, except for the fact that, given
the same input, the results returned will be in reverse order.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Existing service functions allow us to stop a service, but doing so doesn't
guarantee that the service has finished running on a service core. This
commit introduces rte_service_may_be_active(), which returns whether the
service may be executing on one or more lcores currently, or definitely is
not.
The service core layer supports this function by setting a flag when
a service core is going to execute a service, and unsetting the flag when
the core is no longer able to run the service (its runstate becomes stopped
or the lcore is no longer mapped).
With this new function, applications can set a service's runstate to
stopped, then poll rte_service_may_be_active() until it returns false. At
that point, the service is quiesced.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add APIs that allow an application to query and reset the attributes of
a service lcore. Add one such new attribute, "loops", which is a
counter that tracks the number of times the service core has looped in
the service runner function. This is useful to applications that desire
a "liveness" check to make sure a service core is not stuck.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The functions
- vfio_get_container_fd
- vfio_get_group_fd
- vfio_get_group_no
have been renamed to
- rte_vfio_get_container_fd
- rte_vfio_get_group_fd
- rte_vfio_get_group_num
The old names are removed from the map file.
Fixes: 964b2f3bfb ("vfio: export some internal functions")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove version tag from experimental block in linker version scripts
(.map files).
That label is not used by linker and information only. It is useful
for version blocks but not useful for experimental block but confusing.
Removing those labels.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch adds APIs to support container create/destroy and device
bind/unbind with a container. It also provides API for IOMMU programing
on a specified container.
A driver could use "rte_vfio_container_create" helper to create a new
container from eal, use "rte_vfio_container_group_bind" to bind a device
to the newly created container. During rte_vfio_setup_device the container
bound with the device will be used for IOMMU setup.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
