The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. However, the dynamic field for proto_ext are
allocated by PMD, it is the responsibility of application to reserved
the field, before start DPDK.
Application with parse the offset and proto_ext name to PMD with devargs.
Remove related private API in 'rte_pmd_ice.h' and 'rte_pmd_ice.h' file.
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Tested-by: Jin Ling <jin.ling@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added MACsec protocol header to be used for supporting
MACsec protocol offload in hardware or directly in the application.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@nvidia.com>
The ioat driver has been superseded by the ioat and idxd dmadev drivers,
and has been deprecated for some time, so remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A sequence lock (seqlock) is a synchronization primitive which allows
for data-race free, low-overhead, high-frequency reads, suitable for
data structures shared across many cores and which are updated
relatively infrequently.
A seqlock permits multiple parallel readers. A spinlock is used to
serialize writers. In cases where there is only a single writer, or
writer-writer synchronization is done by some external means, the
"raw" sequence counter type (and accompanying rte_seqcount_*()
functions) may be used instead.
To avoid resource reclamation and other issues, the data protected by
a seqlock is best off being self-contained (i.e., no pointers [except
to constant data]).
One way to think about seqlocks is that they provide means to perform
atomic operations on data objects larger than what the native atomic
machine instructions allow for.
DPDK seqlocks (and the underlying sequence counters) are not
preemption safe on the writer side. A thread preemption affects
performance, not correctness.
A seqlock contains a sequence number, which can be thought of as the
generation of the data it protects.
A reader will
1. Load the sequence number (sn).
2. Load, in arbitrary order, the seqlock-protected data.
3. Load the sn again.
4. Check if the first and second sn are equal, and even numbered.
If they are not, discard the loaded data, and restart from 1.
The first three steps need to be ordered using suitable memory fences.
A writer will
1. Take the spinlock, to serialize writer access.
2. Load the sn.
3. Store the original sn + 1 as the new sn.
4. Perform load and stores to the seqlock-protected data.
5. Store the original sn + 2 as the new sn.
6. Release the spinlock.
Proper memory fencing is required to make sure the first sn store, the
data stores, and the second sn store appear to the reader in the
mentioned order.
The sn loads and stores must be atomic, but the data loads and stores
need not be.
The original seqlock design and implementation was done by Stephen
Hemminger. This is an independent implementation, using C11 atomics.
For more information on seqlocks, see
https://en.wikipedia.org/wiki/Seqlock
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Shell used in documentation generation could not run on Windows.
Rewrite scripts in Python.
New scripts use proper path separators and handle paths with spaces.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
API documentation index had spaces between link caption and URL,
which may be unsupported by some Markdown implementations.
That is, "[caption](URL)" is valid but "[caption] (URL)" is not.
The problematic behavior is observed with Doxygen on Windows.
Remove the spaces.
Unfortunately, Markdown syntax is not formally specified.
Fixes: 9bf486e606 ("doc: generate HTML for API with doxygen")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
CSS for API documentation was customized by a shell script
modifying the file that Doxygen produces.
This way CSS code is kept in a script and an extra build step is added.
Move custom style to a plain CSS file.
Use Doxygen capability to attach this extra stylesheet.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add additional PMD APIs for DPAA2 QDMA driver for configuring
RBP, Ultra Short format, and Scatter Gather support
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
With DMA devices supported as a separate flavor of devices,
the DPAA2 QDMA driver is moved in the DMA devices.
This change removes the DPAA2 QDMA driver from raw devices.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adding cnxk device driver support to configure custom SA index.
Custom SA index can be configured as part of the session create
as SPI, and later original SPI can be updated using session update.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Starting in meson 0.56, the functions meson.source_root() and
meson.build_root() are deprecated and to be replaced by the [more
descriptive] functions: project_source_root()/global_source_root() and
project_build_root()/global_build_root(). Unfortunately, these new
replacement functions were only added in 0.56 release too, so to use
them we would need version checks for old/new functions to remove the
deprecation warnings.
However, the functions "current_build_dir()" and "current_source_dir()"
remain unaffected by all this, so we can bypass the versioning problem,
by saving off these values to "dpdk_source_root" and "dpdk_build_root"
in the top-level meson.build file
Bugzilla ID: 926
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Standard "find" on BSD does not support the "-printf" so gfind from
findutils package was used to enable full doc builds. We can remove this
extra dependency by using "sed" and "tr" to adjust the output from
regular find instead.
Fixes: 8260f4f98c ("mk: use script to generate examples.dox")
Fixes: 499fe9dfcf ("doc: add dependency on examples for API doxygen")
Fixes: 897e55c8d2 ("doc: fix Doxygen examples build on FreeBSD")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
examples.dox is built inside builddir/doc/api and so doxygen generates
some dir_HASH.html that includes the builddir name and this may prevent
DPDK documentation to be correctly generated in some distributions, for
example CentOS Stream 9 and RHEL9, since the builddir includes the
architecture.
This commit adds builddir/doc/api (the path where examples.dox is
generated) to STRIP_FROM_PATH, so the generated documentation doesn't
change if builddir changes.
Fixes: a6090630f4 ("doc: automate examples file list for API")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Tested-by: David Marchand <david.marchand@redhat.com>
On FreeBSD, "find" does not support the "printf" flag, so we need to
use "gfind" from the "findutils" package.
Fixes: 8260f4f98c ("mk: use script to generate examples.dox")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
The new library gpudev is for dealing with GPGPU computing devices
from a DPDK application running on the CPU.
The infrastructure is prepared to welcome drivers in drivers/gpu/.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch add a new Toeplitz hash implementation using
Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added flow pattern items and header formats of L2TPv2 and PPP.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This is utility library for writing pcapng format files
used by Wireshark family of utilities. Older tcpdump
also knows how to read (but not write) this format.
See
https://github.com/pcapng/pcapng/
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The 'dmadev' is a generic type of DMA device.
This patch introduce the 'dmadev' device allocation functions.
The infrastructure is prepared to welcome drivers in drivers/dma/
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Switch from using tabs to 4 spaces for meson.build indentation, for the
basic infrastructure and tooling files, as well as doc and kernel
directories.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a new type of reader-writer lock that provides better fairness
guarantees which better suited for typical DPDK applications.
A pflock has two ticket pools, one for readers and one
for writers.
Phase-fair reader writer locks ensure that neither reader nor writer will
be starved.
Neither reader or writer are preferred, they execute in alternating
phases.
All operations of the same type (reader or writer) that acquire the lock
are handled in FIFO order.
Write operations are exclusive, and multiple read operations can be run
together (until a write arrives).
A similar implementation is in Concurrency Kit package in FreeBSD.
For more information see:
"Reader-Writer Synchronization for Shared-Memory Multiprocessor
Real-Time Systems",
http://www.cs.unc.edu/~anderson/papers/ecrts09b.pdf
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove event/dlb driver from DPDK code base.
Updated release note's removal section to reflect the same.
Also updated doc/guides/rel_notes/release_20_11.rst to fix the
the missing link issue due to removal of doc/guides/eventdevs/dlb.rst
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
In this commit we generalize the movement of user-specified
meta data between mbufs and FPGA AXIS tuser fields using
user-defined hook functions.
- Previous use of PMD dynfields are removed
- Remove emptied rte_pmd_ark.h
- Hook function added to ark_user_ext
- Add hook function calls in Rx and Tx paths
- Update guide with example of hook function use
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Add the file descriptor input/output port type for the SWX pipeline.
File descriptor port type provides interface with the kernel network
stack. Example file descriptor port is TAP device.
Signed-off-by: Venkata Suresh Kumar P <venkata.suresh.kumar.p@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the widlcard match/ACL table type for the SWX pipeline, which is
used under the hood by the table instruction.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
In musl libc, cpu_set_t is defined only if _GNU_SOURCE is defined.
In case _GNU_SOURCE is undefined, as in eal_common_errno.c,
it was not possible to include rte_os.h which uses cpu_set_t.
This limitation is removed: if CPU_SETSIZE is not defined,
cpu_set_t related definitions and functions are skipped.
Note: such definitions are unneeded in eal_common_errno.c.
Applications which do not define _GNU_SOURCE may miss cpu_set_t related
features on musl. Such case is detected by RTE_HAS_CPUSET being undefined,
so functions which depend on rte_cpuset_t will be unavailable.
A missing include of fcntl.h is also added.
Bugzilla ID: 35
Fixes: 11b57c6980 ("eal: fix error string function")
Fixes: 176bb37ca6 ("eal: introduce internal wrappers for file operations")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
The headers rte_power_intrinsics.h and rte_power_pmd_mgmt.h
were missing from the doxygen API index.
Fixes: cda57d9388 ("eal: add power management intrinsics")
Fixes: 682a645438 ("power: add ethdev power management")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
RSU (Remote System Update) depends on secure manager which may be
different on various implementations, so a new secure manager device
is implemented for adapting such difference.
There are five APIs added:
1. rte_pmd_ifpga_get_dev_id() get raw device ID of ifpga device from PCI
address like 'Domain:Bus:Dev.Func'.
2. rte_pmd_ifpga_update_flash() update flash with specific image file.
3. rte_pmd_ifpga_stop_update() abort flash update process.
4. rte_pmd_ifpga_reboot_try() check current ifpga status and change it
to reboot status if it is idle.
5. rte_pmd_ifpga_reload() trigger full reconfiguration of ifpga device.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Enable metadata extraction for flexible descriptors in AVF, that would
allow network function directly get metadata without additional parsing
which would reduce the CPU cost for VFs. The enabling metadata
extractions involve the metadata of VLAN/IPv4/IPv6/IPv6-FLOW/TCP/MPLS
flexible descriptors, and the VF could negotiate the capability of
the flexible descriptor with PF and correspondingly configure the
specific offload at receiving queues.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The file "rte_pmd_mlx5.h" is used to provide mlx5 PMD specific APIs
and it needs to be included in the document generation.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PMD uses a public interface to allow applications to
control the token pop mode. Supported token pop modes are
as follows, and they impact core scheduling affinity for
ldb ports.
AUTO_POP: Pop the CQ tokens immediately after dequeueing.
DELAYED_POP: Pop CQ tokens after (dequeue_depth - 1) events
are released. Supported on load-balanced ports
only.
DEFERRED_POP: Pop the CQ tokens during next dequeue operation.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The PMD uses a public interface to allow applications to
control the token pop mode. Supported token pop modes are
as follows, and they impact core scheduling affinity for
ldb ports.
AUTO_POP: Pop the CQ tokens immediately after dequeueing.
DELAYED_POP: Pop CQ tokens after (dequeue_depth - 1) events
are released. Supported on load-balanced ports
only.
DEFERRED_POP: Pop the CQ tokens during next dequeue operation.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The second field of metadata is reserved for user data
which was using a deprecated mbuf field.
It is moved to dynamic fields in order to allow removal of udata64.
The use of meta data must be enabled with a compile-time flag
RTE_PMD_ARK_{TX,RX}_USERDATA_ENABLE.
User data on Tx and Rx paths can be defined and used separately.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Add the ioat driver to the doxygen documentation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
The doxygen index file is not printed as a processed file by doxygen so it
does not appear in the output .d (dependency file) list automatically
generated. Therefore, for correct rebuild tracking, we need to explicitly
include it as a dependency of the doxygen job.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add the exact match table type for the SWX pipeline. Used under the
hood by the SWX pipeline table instruction.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the PCAP file-based source (input) and sink (output) port types
for the SWX pipeline. The sink port is typically used to implement the
packet drop pipeline action. Used under the hood by the pipeline rx
and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the Ethernet device input/output port type for the SWX pipeline.
Used under the hood by the pipeline rx and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add tables to the SWX pipeline. The match fields are flexibly selected
from the headers and meta-data. The set of table actions is flexibly
selected for each table from the set of pipeline actions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add extern objects and functions to plug into the SWX pipeline any
functionality that cannot be efficiently implemented with existing
instructions, e.g. special checksum/ECC, crypto, meters, stats arrays,
heuristics, etc. In/out arguments are passed through mailbox with
format defined by struct.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add input ports to the newly introduced SWX pipeline type. Each port
instantiates a port type that defines the port operations, e.g. ethdev
port, PCAP port, etc. The RX interface is single packet, with packet
batching internally for performance.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add new improved Software Switch (SWX) pipeline type that supports
dynamically-defined packet headers, meta-data, actions and pipelines.
Actions and pipelines are defined through instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When the --werror meson build option is set, we can set the WARN_AS_ERRORS
doxygen option in the doxygen config flag to get the same behaviour for API
doc building as for building the rest of DPDK. This can help catch
documentation errors sooner in the development process.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The meson documentation states that projects should not rely upon the
custom_target build commands are run from any given directory. Therefore,
rather than writing the standout output from doxygen to the current
directory - which could be anywhere in future, put it into the api
directory, so that it is in a known location.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The API docs were output to "<build>/doc/api/api" folder, which was
ugly-looking with the repeated "api", and inconsistent with the sphinx
guides which were written to "<build>/doc/guides/html". Changing the
doxygen output folder to "html" fixes both these issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The standard output of doxygen is very verbose, and since ninja mixes
stdout and stderr together it makes it difficult to see any warnings from
the doxygen run. Therefore, we can just log the standard output to file,
and only output the stderr to make warnings clear.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
