Commit Graph

11165 Commits

Author SHA1 Message Date
Qi Zhang
466eec7d6b net/i40e/base: retry AQC to overcome IRCRead hangs
When the I2C is busy, the PHY reads are delayed. The firmware will
return EGAIN in these cases with an expectation that the SW will trigger
the reads again. This patch retries the operation for a maximum period
of 500ms.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
2018-01-16 18:47:49 +01:00
Qi Zhang
11c52927ff net/i40e/base: release spinlock before function returns
Fix a bug that adminq spin lock is not be released before function
i40e_nvmupd_command returns.

Fixes: 5a2e46a3e4 ("net/i40e/base: refactor NVM update command processing")
Cc: stable@dpdk.org

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
2018-01-16 18:47:49 +01:00
Qi Zhang
2954665d3f net/i40e/base: add (Q)SFP module memory access definitions
Add definations used for accessing and interrupting contents
of (Q)SFP module internal EEPROM memory.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
2018-01-16 18:47:49 +01:00
Qi Zhang
fa94e11bb9 net/i40e/base: add capability macros
Add capability macros for 25G AOC/ACC PHYS.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
2018-01-16 18:47:49 +01:00
Qi Zhang
eafdeab654 net/i40e/base: add new PHY type
Add new PHY type I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP, it will be set
by firmware if device module does not meet the thermal requirements.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
2018-01-16 18:47:49 +01:00
Beilei Xing
0982ef81a6 doc: add DDP in i40e guide
Update i40e.rst to declare DDP support and input set configuration,
as implemented in DPDK 17.11.

Cc: stable@dpdk.org

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
2018-01-16 23:55:42 +01:00
Yanglong Wu
12da1deb89 net/ixgbe: fix the failure of number of Tx queue check
Tx_q check fails when the SRIOV is active and tx_q > rx_q. It has
to use the maximum HW queue number for calculation, to get the
right number of queue can be used.

Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org

Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2018-01-16 18:47:49 +01:00
Qi Zhang
2b38f509c3 net/i40e: exclude LLDP packet count
When use port stats register to calculate the packet count, LLDP packets
are counted in statistics which is not expected, the patch exclude this
number from total number.

Fixes: 763de290cb ("net/i40e: fix packet count for PF")
Cc: stable@dpdk.org

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
2018-01-16 18:47:49 +01:00
Kirill Rybalchenko
d2f9fe8ae3 net/i40e: turn off flexible payload on driver init
Function i40e_GLQF_reg_init() overwrites global register for
flexible payload, forcing extraction of first 16 bytes of
L2/L3/L4 payload to the field vector even if flexible payload
is not used by an application. Such unconditional turn on of
flexible payload effectively disables ability to use outer
IP Destination address for RSS/FDIR for tunnelled packets,
as flexible payload overwrites outer IP destination address
on the field vector.
Now flexible payload turned on only when flow director is
enabled and configured.

Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
2018-01-16 18:47:49 +01:00
Wei Dai
ee653bd800 net/i40e: determine number of queues per VF at run time
Without this patch, the number of queues per i40e VF is set to 4
by CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 in config/common_base.
It is a fixed value determined at compile time and can't be changed
at run time.
With this patch, the number of queues per i40e VF can be determined
at run time. For example, if the PCI address of an i40e PF is
aaaa:bb.cc, with the EAL parameter -w aaaa:bb.cc,queue-num-per-vf=8,
the number of queues per VF created from this PF is set to 8.
If there is no "queue-num-per-vf" setting in EAL parameters, it uses
the default value of 4. And if the value after the "queue-num-per-vf"
is invalid, it will also use the default value. The valid values can
be 1, 2, 4, 8, or 16.

Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2018-01-16 18:47:49 +01:00
Beilei Xing
0b149a3c44 net/i40e: change VF default ITR interval
Current default ITR interval I40E_QUEUE_ITR_INTERVAL_DEFAULT is
used by both DPDK PF and DPDK VF, but this ITR interval value
will cause lots of interrupts when using VF. This patch modifies
VF default ITR interval to reduce interrupts.
ITR interval can be reconfigured by RTE_LIBRTE_I40E_ITR_INTERVAL
if expecting low latency.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2018-01-16 18:47:49 +01:00
Beilei Xing
301c2abeef net/i40e: fix FDIR rule confiliction issue
Failed to create two FDIR rules with different vlan id for
the same PCTYPE. Root cause is that wrong hash key length
is used.

Fixes: 4149825bbd ("net/i40e: finish integration FDIR with generic flow API")
Cc: stable@dpdk.org

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
2018-01-16 18:47:49 +01:00
Wei Zhao
518cc3927b net/ixgbe: move RSS to flow API
Rte_flow was defined to include RSS, this patch moves ixgbe
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
2018-01-16 18:47:49 +01:00
Wei Zhao
424ae915ba net/e1000: move RSS to flow API
Rte_flow was defined to include RSS, this patch moves igb
existing RSS functionalities into rte_flow. The old RSS
configuration method is kept as it was, and can be deprecated in
the future.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
2018-01-16 18:47:49 +01:00
Wei Zhao
cdcd6b686e net/ixgbe: fix parsing FDIR NVGRE issue
This patch fixes the issue of mask check in NVGRE parser
for flow API.

Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
99726a8bb0 doc: add sfc tunnels support to release features
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
c1767d9399 net/sfc: support inner checksum offload on transmit
There is no dedicated controls for inner checksum offload on
device/queue level. So, enable together with outer offloads.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
9701c56197 net/sfc: correct Rx checksum offloads for tunnel packets
In the case of tunnel packet, PKT_RX_{IP,L4}_CSUM_* flags correspond
to inner packet checksums. There is only one flag to indicate bad
external IPv4 header checksum.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
591cbbb1d7 net/sfc: support VXLAN and NVGRE packet types classification
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
fb96ec5612 net/sfc: fix incorrect bitwise ORing of L3/L4 packet types
Not a bug since value is set only once, but it is still incorrect.

Fixes: 638bddc99f ("net/sfc: implement EF10 native Rx datapath")
Cc: stable@dpdk.org

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
36c35355f6 net/sfc: support UDP tunnel ports configuration
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
2018-01-16 18:47:49 +01:00
Ivan Malov
17551f6dff net/sfc/base: add API to control UDP tunnel ports
HW needs to know which UDP packets should be treated as tunnel
encapsulation to do inner packet recognition, classification and
offloads.

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
0ece88b747 net/sfc/base: allow to request inner classes for Rx packets
If HW/FW supports tunnel encapsulations, Rx event may contain
either inner or outer packet classes. By default outer classes
are requested. Make it possible to request inner classes to
have more information about packet type and allow to interpret
inner frame checksum validation results correctly.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
b749646dad net/sfc/base: add function to create packed stream RxQ
Encoding packed stream buffer size in RxQ type is not a future-proof
idea taking into account a new RxQ types with extra parameters.
To be consistent make packet stream buffer size a separate parameter.
In order to avoid blowing of the default RxQ create function prototype
add a dedicated function to create packed stream RxQ without not
applicable paramters.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
d882d61794 net/sfc/base: control RxQ scatter using flag instead of type
Rx scatter may be applicable to different Rx queue types.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
b1ffa21148 net/sfc: retry port start to handle MC reboot in the middle
MC reboot may be provoked by the other function which is either
starting in parallel or, for example, reconfiguring UDP tunnel
ports.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
e77f9f1906 net/sfc: handle MC reboot event
Implement handling of the MC reboot event received on management
event queue or detected by MCDI processing.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
f042136ee2 net/sfc: do not hold management event queue lock while MCDI
MCDI execution may require MCDI proxy handling which involves
management event queue polling. So, it is a bad idea to hold
managment event queue lock when MCDI is executed.

Event queue creation and destruction are MCDI operations.

Fixes: 4650ed44c1 ("net/sfc: support MCDI proxy")
Cc: stable@dpdk.org

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
2018-01-16 18:47:49 +01:00
Andrew Rybchenko
815689241f net/sfc: fix label name to be consistent
Management event queue is the right name of event queue 0.

Fixes: 3b809c27b1 ("net/sfc: support link status change interrupt")
Cc: stable@dpdk.org

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
9b42983396 event/octeontx: fix Rx adapter port id mapping
When octeontx event dev receives a packet for the event Rx adapter, the
mbuf port id should contain the appropriate ethdev id instead of
internal channel info.

Fixes: 45a914c5bd ("event/octeontx: support event Rx adapter")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
989d492620 net/octeontx: add channel to port id mapping
The channel to port id map is used by event octeontx to map the received
wqe to the respective ethdev port.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
21a8b7c0c5 doc: remove unused config options
Remove unused debug config options for thunder nicvf and octeontx as they
are now controlled by dynamic logging.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
6ff1717841 event/octeontx: implement dynamic logging
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
7d6321de8d mempool/octeontx: implement dynamic logging
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
4d35a276c1 net/octeontx: implement dynamic logging
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
c563443c64 net/thunderx: implement dynamic logging
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
70e28c612d net/liquidio: implement dynamic logging
This driver mostly uses the common pattern. Convert this to the
dynamic logging.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
69b6573980 net/qede: implement dynamic logging
This driver is mostly like others with slightly different logging
macros. The semantics were retained, with some minor reformatting.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
8bc0acae97 net/ena: implement dynamic logging
Use dynamic rather static configuration for logging.
Also include ena_assert_msg.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
1ad18ef8bf net/fm10k: implement dynamic logging
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
c73f9b2662 net/nfp: implement dynamic logging
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>

---
v2: remove unsed macro RTE_LIBRTE_NFP_NET_DEBUG_INIT
2018-01-16 18:47:49 +01:00
Stephen Hemminger
0062818856 net/virtio: implement dynamic logging
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
ed5bbb767c net/e1000: implement dynamic logging
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
174dae95c9 net/ixgbe: implement dynamic logging
Convert all drivers possible to dynamic logging.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
79daffdcb6 net/vmxnet3: implement dynamic logging
Replace compile time configuration with runtime.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Stephen Hemminger
4f3419a602 net/bnx2x: implement dynamic logging
Replace compile time option for init and driver log with
dynamic value.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>

---
v2: remove remaining RTE_LIBRTE_BNX2X_DEBUG usage
2018-01-16 18:47:49 +01:00
Stephen Hemminger
e6b790c065 net/avp: implement dynamic logging
All PMD should be using dynamic log levels.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-01-16 18:47:49 +01:00
Radu Nicolau
c5cf2a0429 net/tap: renamed netlink functions
Functions like nl_recev and nl_send name clash functions in the
libnl library (https://www.infradead.org/~tgr/libnl/).
All functions declared in tap_netlink.h were decorated with tap_
for consistency.

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-01-16 18:47:49 +01:00
Pavan Nikhilesh
5452a17d3c net/octeontx: advertise supported mbuf pool ops
Advertise mempool/octeontx as the only supported mempool ops when the
application checks using `rte_eth_dev_pool_ops_supported`.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
2018-01-16 18:47:49 +01:00
Elza Mathew
4773152f85 ethdev: optimize xstats by ids APIs
Introduced a check to detect if the stats IDs being
requested are all basic stats IDs. In that case,
ensured that only the basic stats would be retrieved.

Previously, both basic stats and xstats were being
retrieved even if all the IDs were basic stats IDs.

Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Lee Daly <lee.daly@intel.com>
2018-01-16 18:47:49 +01:00