Added support for parsing raw flow item.
flow_item_raw_preprocess() is added for the same.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
pmd_flow_destroy() API is added to destroy the
created flow.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
pmd_flow_create API is added to support
rte flow create.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added validation and mapping of flow rule action
with table action profile.
Added flow_rule_action_get() to do the same.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Support for validating and mapping flow rule with HASH
table match is added.
As part of this, below helper functions are added.
flow_rule_match_hash_get()
hash_key_mask_is_same()
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Support for validating and mapping rte flow rule with
ACL table match is added.
As part of this support below utility functions
been added
flow_rule_match_get()
flow_rule_match_acl_get()
flow_item_skip_disabled_protos()
flow_item_proto_preprocess()
flow_item_is_proto()
flow_item_raw_preprocess()
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Start adding flow api operations.
Started with flow validate api support by adding
below basic infrastructure.
flow_pipeline_table_get()
pmd_flow_validate()
Additional flow validate changes will be
added in next patches.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Add utility function to get the rte_eth_dev from
a given softnic.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added utility function to freeup the
pipeline tables.
Added utility functions to find the pipeline
output port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Change dev_name, action_profile_name and key_mask
from char* type to arary type of structures
softnic_port_in_params, softnic_port_out_params
and softnic_table_hash_params.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added new cli by which user can specify to softnic
which rte flow group and direction has to mapped to
which pipeline and table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added mapping support from rte_flow attributes
to softnic pipeline and table.
So added flow attribute map set and get functions
definition to new file rte_eth_sofnic_flow.c.
Added pmd flow internals with ingress and egress
flow attribute maps.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
This commit modifies SoftNIC to make use of the new header files in
librte_table.
As we are now using the new header files in librte_table in SoftNIC, we no
longer need the old header files so they can be removed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit modifies the IP Pipeline application to use the new header
files in librte_table.
As we are now using the new header files, we can remove the old ones from
the application directory.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds rte_table_hash_func.h and rte_table_hash_func_arm64.h to
librte_table. This reduces code duplication by removing duplicate header
files within two folders and consolidating them into a single one. This
also adds a scalar implementation of the x86_64 intrinsic for crc32 as a
generic fallback.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add following testpmd run-time commands to support test of TM packet
marking:
set port tm mark ip_ecn <port_id> <green> <yellow> <red>
set port tm mark ip_dscp <port_id> <green> <yellow> <red>
set port tm mark vlan_dei <port_id> <green> <yellow> <red>
Signed-off-by: Krzysztof Kanas <krzysztof.kanas@caviumnetworks.com>
Fixes bad arguments error for cli commands related to adding meter
profile for srtcm_rfc2697, trtcm_rfc2698 and trtcm_rfc4115.
error log:
testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000
3125000000 2500000 2500000
Bad arguments
Fixes: 30ffb4e67e ("app/testpmd: add commands traffic metering and policing")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Replace rte_zmalloc() with rte_zmalloc_socket() to allocate
memory on the socket id provided by the application.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
There's very commonly that more than 4G DDR memory in NIC for HQoS,
so right now the queue threshold size of RED needs to expand to
uint64_t. This patch fixes it.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Currently, slab operations use unsigned long data type for 64-bit slab
related operations. On target 'i686-native-linuxapp-gcc', unsigned long
is 32-bit and thus, slab operations breaks on this target. Changing slab
operations to use unsigned long long for correct functioning on
all targets.
Fixes: de3cfa2c98 ("sched: initial import")
Fixes: 693f715da4 ("remove extra parentheses in return statement")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <vivek.sharma@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
If global RSS is not enabled in the multiqueue mode setting,
it will not be possible to change RSS configuration. However,
querying default RSS settings should be possible in any case since
it may be needed by RTE flow API users to find out what RSS settings
will be used by default for a flow rule with RSS action if custom
RSS key and hash function choice are not specified.
Fixes: 63ab5e0c8f ("net/sfc: use zero RSS channels as disabled RSS indicator")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Isolated mode prevents global RSS from being enabled and configured.
However, an application may need to query default RSS key and hash
functions when a flow rule with RSS action is added which does not
contain custom RSS key or hash function choice. In this case
global RSS key and hash functions will be used to handle the rule,
and there should be some way for the application to query these
global default settings to clarify expectations on the traffic
distribution.
Fixes: 84a9b48128 ("net/sfc: support flow API isolated mode")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Earlier a patch was made to support change of Rx queue
number. That patch added goto label in wrong place
because reconfiguration with the same number of queues
results in skipping not only queue init but also RSS
settings. If a user configures device with RSS multiqueue
mode and then wants to stop it and reconfigure without RSS,
this change will be ignored and RSS will continue working.
Move the label in the right place and rename it to describe it.
Fixes: 55a539003f ("net/sfc: support changing the number of receive queues")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As ifcvf_init_hw is independent with ifcvf_vfio_setup, it's better to
invoke it directly in probe func.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
The address translation from user virtual address to guest physical
address should not be named as qva_to_gpa.
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Linux supports 82574 MSI-x interrupt for linkup and other link
conditions. Enable the same feature in the e1000 PMD in order to
allow this card to work properly, as it requires interrupt
handling for link negotiations among other things.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
rx_drop_en is an optimization that does nothing on single-queue
devices like e1000. Do not force applications that do not care to
select per-devices optimizations flags by returning an error, just
log it and carry on.
Fixes: 805803445a ("e1000: support EM devices (also known as e1000/e1000e)")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Offload the following rte_flow actions by inserting accordingly
E-Switch rules via TC Flower driver
- RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
- RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
- RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC
- RTE_FLOW_ACTION_TYPE_SET_IPV6_DST
- RTE_FLOW_ACTION_TYPE_SET_TP_SRC
- RTE_FLOW_ACTION_TYPE_SET_TP_DST
The example testpmd command is:
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7000 / end
actions set_ipv4_src ipv4_addr 172.168.0.1 /
set_ipv4_dst ipv4_addr 172.168.10.1 /
set_tp_dst port 9000 /
set_tp_src port 700 /
port_id id 1 / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch adds support for offloading flow rules with TCP-flags
filter to mlx5 eswitch Hardwrae.
With mlx5 it is possible to offload a limited set of flow rules to
the mlxsw (or e-switch) using the DPDK flow commands using the
"transfer" attribute. This set of flow rules also supports filtering
according to the values found in the TCP flags.
This patch implements this offload capability in the mlx5 PMD under
transfer attribute.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
This patch complements [1], adding to MLX5 PMD the option to set
flow rule for egress traffic.
[1] "net/mlx5: support metadata as flow rule criteria"
http://mails.dpdk.org/archives/dev/2018-September/113275.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In the current code, on some cases the representor ethdev is using the
PF interface to query some link status information or pause parameters.
It was done because in previous kernel versions there was no support
from the kernel for the representor info.
Using the PF i/f for such ioctl is error prone and not always working
because:
* On some cases there is no PF at all, only representors (e.g Bluefield
with host representors)
* Query the up/down status from representor and link status from PF
is in-consist
* PF link is down doesn't necessarily means representor is down.
* setting different pause configuration for the PF and the
representors will result on undefined behaviour
Making the code cleaner and more robust by using only the representor
i/f for the ioctl. whatever the kernel will provide on this query will
be used. No need to do W.A. for kernel missing functionality.
Note:
1. Setting pause parameters will obviously won't work on representors
2. Old kernel will not report all the possible representor info
Fixes: 2b73026388 ("net/mlx5: probe all port representors")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Representor ports has a different set of extended statistics (as those are
logical ports which cannot count all that the PF can).
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
The current code would fail if one of the counters DPDK counters was not
found on the device counters.
As representors and PF port has different counters the both cannot work
together.
Addressing this issue by making the counter init more flexible to
contain all the counter found and skipping the error.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
This adds a new forwarding mode to testpmd to simulate
more realistic behavior of a guest machine engaged in receiving
and sending packets performing Virtual Network Function (VNF).
The goal is to enable a simple way of measuring performance impact on
cache and memory footprint utilization from various VNF co-located on
the same host machine. For this it does:
* Buffer packets in a FIFO:
Create a fifo to buffer received packets. Once it flows over put
those packets into the actual tx queue. The fifo is created per tx
queue and its size can be set with the --noisy-tx-sw-buffer-flushtime
commandline parameter.
A second commandline parameter is used to set a timeout in
milliseconds after which the fifo is flushed.
--noisy-tx-sw-buffer-size [packet numbers]
Keep the mbuf in a FIFO and forward the over flooding packets from the
FIFO. This queue is per TX-queue (after all other packet processing).
--noisy-tx-sw-buffer-flushtime [delay]
Flush the packet queue if no packets have been seen during
[delay]. As long as packets are seen, the timer is reset.
Add several options to simulate route lookups (memory reads) in tables
that can be quite large, as well as route hit statistics update.
These options simulates the while stack traversal and
will trash the cache. Memory access is random.
* simulate route lookups:
Allocate a buffer and perform reads and writes on it as specified by
commandline options:
--noisy-lkup-memory [size]
Size of the VNF internal memory (MB), in which the random
read/write will be done, allocated by rte_malloc (hugepages).
--noisy-lkup-num-writes [num]
Number of random writes in memory per packet should be
performed, simulating hit-flags update. 64 bits per write,
all write in different cache lines.
--noisy-lkup-num-reads [num]
Number of random reads in memory per packet should be
performed, simulating FIB/table lookups. 64 bits per read,
all write in different cache lines.
--noisy-lkup-num-reads-writes [num]
Number of random reads and writes in memory per packet should
be performed, simulating stats update. 64 bits per read-write, all
reads and writes in different cache lines.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In interactive mode, when the "quit" command is issued, pmd_test_exit()
is being called twice, once through the "quit" command and the other
after termination of prompt.
Remove duplicated exit routine by removing call from "quit" command.
Steps to reproduce:
- Run testpmd in interactive mode.
- type "quit".
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
existing testpmd command "show port info" is too verbose.
Added a new summary command to print brief information on ports.
console output:
testpmd> show port summary all
Number of available ports: 2
Port MAC Address Name Driver Status Link
0 11:22:33:44:55:66 0000:07:00.0 net_i40e up 40000Mbps
1 66:55:44:33:22:11 0000:07:00.1 net_i40e up 40000Mbps
Signed-off-by: Emma Finn <emma.finn@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Devargs may affect how device works but currently we don't have a
way to observe provided devargs.
Add ability to print device argument as part of port info,
For example, for "--vdev net_pcap0,iface=lo" output will be
"
********************* Infos for port 1 *********************
MAC address: 02:70:63:61:70:00
Device name: net_pcap0
Driver name: net_pcap
Devargs: iface=lo
....
"
or for "-w0000:86:00.1,queue-num-per-vf=8",
"
********************* Infos for port 0 *********************
MAC address: 3C:FD:FE:AB:B4:41
Device name: 0000:86:00.1
Driver name: net_i40e
Devargs: queue-num-per-vf=8
....
"
`Devargs` line may not be printed at all if devargs is not provided for
that device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fixes: af689f1f04 ("net/mlx5: support flow Ethernet item along with drop action")
Fixes: 919d53ad78 ("net/mlx5: fix count query when flow has not counter")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
1) VLAN modify isn't supported by driver.
2) FW syndrome (0xA9C090):
set_flow_table_entry: push vlan action fte in fdb can ONLY be
forward to the uplink.
3) FW syndrome (0x294609):
set_flow_table_entry: modify/pop/push actions in fdb flow table are
supported only while forwarding to vport.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Collect and prints the statistics for PKT_RX_EL4_CKSUM_BAD
errors.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
