When testpmd is run, the application would hang on the second time
that "start" is executed. This is because the timer limit would get
multiplied to an unreachably high number.
At the start of flush_fwd_rx_queues(), the timer limit now resets
to stop it from getting to this high number.
The timer has been made local for this function.
Fixes: f487715f36f5 ("app/testpmd: add timeout in Rx queue flushing")
Signed-off-by: James Poole <james.g.poole@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Avoid access to mempool pointer if it is NULL.
Coverity issue: 127553
Fixes: b19a0c75a0d4 ("app/testpmd: remove anonymous mempool code")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Inside flush_fwd_rx_queues removed redundant prev_tsc update with cur_tsc,
as prev_tsc value is always updated with rte_rdtsc() in for loop.
Coverity issue: 127797
Fixes: f487715f36f5 ("app/testpmd: add timeout in Rx queue flushing")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since commit f2bb7ae1d204, behavior of rss_fwd_config_setup() changed
and description of this function is wrong now.
Also, there is a type mismatch in a loop.
Fixes: f2bb7ae1d204 ("app/testpmd: handle all Rx queues in RSS setup")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Testpmd can stuck inside do while loop of the flush_fwd_rx_queues()
function. As non-zero packets are returned always by rte_eth_rx_burst()
function when compiled with no optimizations and if input line rate is
high. "do while" loop must exit at one stage to proceed further to
enable packet forwarding and forward the packets. So timer is set to
exit the do while loop after 1 second.
Fixes: af75078f ("first public release")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In testpmd code, device id is used directly to check if bypass
is supported. But APP should not know the details of HW, the NIC
specific info should not be exposed here.
As every bypass API does know if it's supported, no need to check
that at first. So, this patch removes the *bypass_is_supported*.
Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Number of forwarding cores must be equal or less than
number of forwarding streams, otherwise two cores
would try to use a same queue on a port, which is not allowed.
Fixes: f2bb7ae1d204 ("app/testpmd: handle all Rx queues in RSS setup")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fixes memory leaks detected by Coverity. These are due to ephemeral
memory allocations not being freed when errors occur.
Coverity issue: 127348
Fixes: e2aae1c1ced9 ("ethdev: remove name from extended statistic fetch")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Call rte_pdump_init and rte_pdump_uninit for packet
capturing initialization and uninitialization.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Calling rte_eth_dev_rss_hash_update without checking return value.
Fixed by handle return value and print out error status.
Coverity issue: 119251
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch show topology at forwarding start.
"show config fwd" also does this, but showing it directly can reduce the
possibility of misconfiguration.
Currently fwd_config_display() calls fwd_config_setup(), this misleading
behavior will be fixed in other patches.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch removes constraints in rxq handling when multiqueue is enabled
to handle all the rxqs.
Current testpmd forces a dedicated core for each rxq, some rxqs may be
ignored when core number is less than rxq number, and that causes confusion
and inconvenience.
One example: an engineer was doing multiqueue test, there're 2
ports in guest each with 4 queues, and testpmd was used as the forwarding
engine in guest, as usual he used 1 core for forwarding, as a results he
only saw traffic from port 0 queue 0 to port 1 queue 0, then a lot of
emails and quite some time are spent to root cause it, and of course it's
caused by this unreasonable testpmd behavior.
Moreover, even if we understand this behavior, if we want to test the
above case, we still need 8 cores for a single guest to poll all the
rxqs, obviously this is too expensive.
We met quite a lot cases like this, one recent example:
http://openvswitch.org/pipermail/dev/2016-June/072110.html
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds throughput numbers (in the period since last use of this
command) in port statistics display for "show port stats (port_id|all)".
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch enables configurable tx_first burst number.
Use "start tx_first (burst_num)" to specify how many bursts of packets to
be sent before forwarding start, or "start tx_first" like before for the
default 1 burst send.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds retry option in testpmd to prevent most packet losses.
It can be enabled by "set fwd <mode> retry". All modes except rxonly
support this option.
Adding retry mechanism expands test case coverage to support scenarios
where packet loss affects test results.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Stop forwarding on exit whether all ports are started or not.
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: b6ea6408fbc7 ("ethdev: store numa_node per device")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move call to init_fwd_streams from start_port function
to start_packet_forwarding function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add call to fwd_config_setup to init_config.
Add call to fwd_config_setup for corelist, coremask and nbcore setup.
Add call to fwd_config_setup for portlist, portmask and nbport setup.
Add call to fwd_config_setup for rxq, txq, rxd and txd setup.
Remove fwd_config_setup from fwd_config_display.
Call the pkt_fwd_config_display function directly,
and remove the fwd_config_display wrapper function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add new function port_is_bonding_slave
Use this function in stop_port and close_port functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add calls to port_is_forwarding function in stop_port and
close_port functions to check that port is not forwarding.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Do not update forwarding configuration when attaching or detaching a port
Remove checks on test_done variable.
Remove code to update forwarding configuration.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The log history uses rte_mempool. In order to remove the mempool
dependency in EAL (and improve the build), this feature is deprecated.
The ABI is kept but the behaviour is now voided because it seems this
function was not used. The history can be read from syslog.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
prefetch the next packet data address in advance in forwarding loop
for performance improvement.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Enhance the logs related to mbuf pool creation. Display an info level
log when creating the mbuf, and display the error as a string on failure.
After the patch, we have:
[...]
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=331456, \
size=2176, socket=0
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed: Cannot allocate \
memory
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all txqflags <value>" allows for
specifying txq_flags value in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all scatter on|off" allows for
controlling rxmode.enable_scatter in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter allows for controlling rxmode.enable_scatter
which in turn allow for multi-segment packet receive tests.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Now that mempool library provide functions to populate with anonymous
mmap'd memory, we can remove this specific code from test-pmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit renames mempool_obj_ctor_t as mempool_obj_cb_t.
In next commits, we will add the ability to populate the
mempool and iterate through objects using the same function.
We will use the same callback type for that. As the callback is
not a constructor anymore, rename it into rte_mempool_obj_cb_t.
The rte_mempool_obj_iter_t that was used to iterate over objects
will be removed in next commits.
No functional change.
In this commit, the API is preserved through a compat typedef.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
CID 13307 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
fixed_size_dest: You might overrun the 128 byte fixed-size string fwd_modes
by copying fwd_eng->fwd_mode_name without checking the length.
Fixes: 769ce6b17835 ("app/testpmd: list forwarding engines")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
With LIBRTE_PMD_XENVIRT enabled testpmd is built in a way to ONLY work
in XEN environments.
It will surface as:
PMD: gntalloc: ioctl error
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed
With LIBRTE_PMD_XENVIRT enabled this now tries the xen style grant
table allocation, but falls back gracefully for the normal allocation.
The only thing left in the log will be the
PMD: gntalloc: ioctl error
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The code for checking and parsing speed/duplex was duplicated.
The new function is also checking the speed/duplex combination.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Build log:
/root/dpdk/app/test-pmd/cmdline.c:6687:45: error: no member named
's6_addr32' in 'struct in6_addr'
rte_be_to_cpu_32(res->ip_value.addr.ipv6.s6_addr32[i]);
This is caused by macro "s6_addr32" not defined on FreeBSD and testpmd
swap big endian parameter to host endian. Move the swap action to i40e
ethdev will fix this issue.
Fixes: 7b1312891b69 ("ethdev: add IP in GRE tunnel")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
This patch extends the commands for changing flow director filter's input
set. It adds vlan as a possible filter input field.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends commands for changing a flow director filter's input
set. It adds tos, protocol and ttl as filter's input fields, and removes
the words selection from flex payloads.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
