AESNI MB now supports authentication only operations,
but the array containing all the possible digest lengths
was not updated to reflect the new algorithm NULL_HASH,
causing an "Out-of-bounds access".
Coverity issue: 140977
Fixes: 8772c3f713 ("crypto/aesni_mb: add single operation functionality")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The range of TC bandwidth is 0 ~ 800, it's 16bits not 8bits.
Fixes: c8b9a3e3fe ("i40e: support DCB mode")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Use vlan_mask->tci as big endian since this is how rte flow defines it.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Fixes: 37ed39b4e6 ("net/ixgbe: add TCI mask check for flow director")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Rx statistic is incorrect when packet is oversize.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The framework of the ixgbe doc is not appropriate,
adjust it.
Fixes: 972e365bfe ("doc: nics guide")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Trying to query the link status through the new ETHTOOL_GLINKSETTINGS
ioctl available since Linux 4.5 was always failing due to a kernel bug
fixed since version 4.9.
This commit also addresses a common issue where the headers version used
at compile time differs from that of the kernel on the target system, by
always defining missing symbols and moving the kernel version check at run
time.
Fixes: 1884087198 ("net/mlx5: fix support for newer link speeds")
CC: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Vector PMD will check 4 descs in one time, but the statuses are not
consistent because the memory allocated for RX descriptors is cacheable
huagepage.
This patch is to calculate the number of received packets by scann DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
To get better performance, Rx bulk alloc recv function will scan 8 descs
in one time, but the statuses are not consistent on ARM platform because
the memory allocated for Rx descriptors is cacheable hugepages.
This patch is to calculate the number of received packets by scan DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: 7431041062 ("ixgbe: allow rx bulk alloc")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Hard coded mask values were being used for several of the IPv4 and IPv6
fields. Use the values in the rte_eth_fdir_masks structure provided by the
caller.
Fixes: dfbd6a9cb5 ("net/enic: extend flow director support for 1300 series")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
PKT_TX_TUNNEL_MASK and PKT_TX_IEEE1588_TMST are missed in bitmask
of all supported packet Tx flags by i40e. It will cause packet preparing
fail when sending tunnel packets with Tx offload.
This patch fixes it.
Fixes: 3f33e643e5 ("net/i40e: add Tx preparation")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix the redundant delay in function link update. There is no need to
call rte_delay_ms and hold CPU for 100ms when link status is up.
Fixes: 263333bbb7 ("i40e: fix link status timeout")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The total length field in descriptor of inlined multi-packet send must be
updated before closing a session. There's possibility of updating it
afterward. This bug might cause one packet out of MLX5_MPW_DSEG_MAX gets
silently dropped by HW and impact performance, especially lossless test.
Fixes: 230189d9ff ("net/mlx5: support multi-packet send")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Missed packets on RX were erroneously being assigned to the ierrors
struct member. Change it to be assigned to imissed.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Tom Crugnale <tcrugnale@sandvine.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The GL_SWR_PRI_JOIN_MAP registers are effective on filters, changing
the register's default value will fail the ethertype filter.
The GL_SWR_PRI_JOIN_MAP values are different for each NIC, and current
X722 register values are wrong.
Fix X722 ethertype filter by setting registers to X722 default NVM
values.
Fixes: 92fbf2cbdf ("i40e: support X722 and its A0 hardware")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value
in drivers after rte_eth_copy_pci_info().
Previous values of the dev_flags set in rte_eth_copy_pci_info(),
like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device
configuration.
Fix by preventing dev_flags overwritten.
Fixes: 22dda618c0 ("pci: separate detaching ethernet ports from PCI devices")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Creating IPv4 flow and IPv6 flow will cause conflict error.
Root cause is there's no IP info included in tunnel filter
input.
Fixes: 425c3325f0 ("net/i40e: store tunnel filter")
Fixes: d416530e63 ("net/i40e: parse tunnel filter")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
VNI of VXLAN is parsed wrongly. The root cause is that
array VNI in item VXLAN uses network byte ordering.
Fixes: d416530e63 ("net/i40e: parse tunnel filter")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
The hardware may reject adding host_info in case support for
host_info is missing in the list of supported features. On the
other hand the list of supported features may contain support
for the host_info - typical bootstrap problem.
This patch solves it by removing check against support for
host_info attribute and improves error handling by reacting
only to host attribute write failure to the hardware.
Fixes: 99ecfbf845 ("ena: import communication layer")
Cc: stable@dpdk.org
Signed-off-by: Jakub Palider <jpa@semihalf.com>
For PMD specific API it is required to check if provided port id is for
a supported device.
It's not appropriate to call rte_eth_dev_info_get in PMD, as
rte_eth_dev_info_get need to get info from PMD.
Remove rte_eth_dev_info_get from PMD code and get the info directly.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fixes: f457b472b1 ("net/tap: add link up and down operations")
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
At the same time remove the code which created the first device queue
at probe time. Now all queues are created during queue setup calls.
Fixes: 02f96a0a82 ("net/tap: add TUN/TAP device PMD")
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
VNI of VXLAN is parsed wrongly. The root cause is that
VNI array in VXLAN item also uses network byte ordering.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Add more check on the tci mask of VLAN and VXLAN parser
in fdir filter rule pattern parser. If such check not added,
it maybe cause error in fdir configuration set check.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
If a packet send is attempted with a packet larger than the NIC
is capable of processing (9208) it will be dropped with no
completion descriptor returned or completion index update, which
will lead to an mbuf leak and eventual hang.
Drop and count oversized Tx packets in the Tx burst function and
dereference/free the mbuf without sending it to the NIC.
Since the maximum Rx and Tx packet sizes are different on enic
and are now both being used, make the define ENIC_DEFAULT_MAX_PKT_SIZE
be 2 defines, one for Rx and one for Tx.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
The probe parses for user-defined iface name. Let's use that value.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
There's no point in having a different internal MAC address than the one
provided by the kernel when creating the netdevice.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
pmd->fds[0], pmd->rxq[0] and pmd->txq[0] are set a couple of lines after
the for loop that initializes them to -1.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
dev->data->name contains the device name, e.g. "net_tap0".
dev->data->dev_private->name contains the actual iface name,
e.g. "dtap0".
In any case, the name must to be consistent with the tun_alloc() call in
eth_dev_tap_create().
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
For some sizes of packets, the number of bytes copied in the work queue
element could be greater than the available size of the inline. In such
situation it could consume one more work queue element where it should
not.
Fixes: 0e8679fcdd ("net/mlx5: fix inline logic")
Cc: stable@dpdk.org
Reported-by: Elad Persiko <eladpe@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Fixes an issue which may occurs with the inline feature activated and a
packet greater than the max_inline requested.
In such situation, more work request elements can be consumed and in the
worst case override some still handled by the NIC, this can result in
sending garbage on the network or putting the work queue in error.
Fixes: 2a66cf3789 ("net/mlx5: support inline send")
Cc: stable@dpdk.org
Reported-by: Elad Persiko <eladpe@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
First two bytes of the Ethernet header was written twice at the same place.
Fixes: b8fe952ec5 ("net/mlx5: prepare Tx vectorization")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The patch is to fix sfc_set_mc_addr_list() behaviour in order
to make it accept an empty multicast address list thus making
it possible to remove multicast addresses inserted previously
Fixes: 0fa0070e43 ("net/sfc: support multicast addresses list controls")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding a flow when the port is stopped ends in an inconsistent situation
where the queue can receive traffic when it should not.
Record new rules and apply them as soon as the port is started.
Fixes: 2097d0d1e2 ("net/mlx5: support basic flow items and actions")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A configuration structure for the MARK action must always be specified.
Fixes: ea3bc3b1df ("net/mlx5: support mark flow action")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Default masks were introduced in the API after its implementation in this
PMD.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
